mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git
synced 2024-09-19 00:55:18 +00:00
soc: dt updates for 6.11
The devicetree updates are fairly well spread out across platforms,
with Qualcomm making up about a third of the total.
There are three new SoCs in existing product families this:
- NXP i.MX95 is a variant of i.MX93, now with six Cortex-A55 cores
instead of just two as well as a GPU and more high-speed I/O
devices.
- Qualcomm QCS8550 is a variant of SM8550 for IOT devices
- Airoha EN7581 is a 10G-PON network chip and related to
the MT7981 Wireless router chip from its parent Mediatek.
In total there are 58 new machines, including four riscv
boards and eight for 32-bit arm.
The most exciting new addition is probably a pair of laptops
based on the Qualcomm x1e80100 (Snapdragon X1 Elite) chip,
the Asus Vivobook S15 and the Lenovo Yoga Slim7x.
Other noteworthy new additions are:
- A total of 20 Qualcomm based machines, mostly Android devices
from Samsung, Motorola and LG, as well as a wireless router
and some reference designs
- Six NXP i.MX based machines, mostly industrial boards along
with some reference designs
- Mediatek sees some interesting Filogic based routers
including the "OpenWRT One", a few new Chromebooks as
well as single-board computers.
- Four machines from Solidrun based on Marvell cn913x,
replacing the older Armada 8000 based counterparts
- The four Amlogic machines are all set top boxes or reference
designs for them
- The nine new Rockchips machines are mostly single-board
computers including some interesting ones based on the
rk3588 chip like the ROCK 5 ITX board and the CM3588
with its four NVMe slots
- The RISC-V boards are all single-board computers based on
Starfive JH7110, Microchip MPFS and Allwinner D1, which all
had similar boards already
There are also a lot of updates to already supported machines,
notably for the TI K3, Rockchips, Freescale and of course
Qualcomm platforms.
-----BEGIN PGP SIGNATURE-----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=xGqj
-----END PGP SIGNATURE-----
Merge tag 'soc-dt-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC dt updates from Arnd Bergmann:
"The devicetree updates are fairly well spread out across platforms,
with Qualcomm making up about a third of the total.
There are three new SoCs in existing product families this:
- NXP i.MX95 is a variant of i.MX93, now with six Cortex-A55 cores
instead of just two as well as a GPU and more high-speed I/O
devices.
- Qualcomm QCS8550 is a variant of SM8550 for IOT devices
- Airoha EN7581 is a 10G-PON network chip and related to the MT7981
Wireless router chip from its parent Mediatek.
In total there are 58 new machines, including four riscv boards and
eight for 32-bit arm.
The most exciting new addition is probably a pair of laptops based on
the Qualcomm x1e80100 (Snapdragon X1 Elite) chip, the Asus Vivobook
S15 and the Lenovo Yoga Slim7x.
Other noteworthy new additions are:
- A total of 20 Qualcomm based machines, mostly Android devices from
Samsung, Motorola and LG, as well as a wireless router and some
reference designs
- Six NXP i.MX based machines, mostly industrial boards along with
some reference designs
- Mediatek sees some interesting Filogic based routers including the
"OpenWRT One", a few new Chromebooks as well as single-board
computers.
- Four machines from Solidrun based on Marvell cn913x, replacing the
older Armada 8000 based counterparts
- The four Amlogic machines are all set top boxes or reference
designs for them
- The nine new Rockchips machines are mostly single-board computers
including some interesting ones based on the rk3588 chip like the
ROCK 5 ITX board and the CM3588 with its four NVMe slots
- The RISC-V boards are all single-board computers based on Starfive
JH7110, Microchip MPFS and Allwinner D1, which all had similar
boards already
There are also a lot of updates to already supported machines, notably
for the TI K3, Rockchips, Freescale and of course Qualcomm platforms"
* tag 'soc-dt-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (846 commits)
arm64: dts: allwinner: h616: add crypto engine node
riscv: dts: add clock generator for Sophgo SG2042 SoC
arm64: dts: rockchip: Add Xunlong Orange Pi 3B
dt-bindings: arm: rockchip: Add Xunlong Orange Pi 3B
arm64: dts: rockchip: Add Radxa ROCK 3B
dt-bindings: arm: rockchip: Add Radxa ROCK 3B
mailmap: Update Luca Weiss's email address
ARM: dts: ixp4xx: nslu2: beeper uses PWM
arm64: dts: rockchip: add ROCK 5 ITX board
dt-bindings: arm: rockchip: Add ROCK 5 ITX board
arm64: dts: rockchip: Add dma-names to uart1 on Pine64 rk3566 devices
arm64: dts: rockchip: Add avdd supplies to hdmi on rock64
arm64: dts: qcom: msm8916-lg-c50: add initial dts for LG Leon LTE
arm64: dts: qcom: msm8916-lg-m216: Add initial device tree
dt-bindings: arm: qcom: Add msm8916 based LG devices
ARM: dts: qcom: msm8960: correct memory base
arm64: dts: qcom: ipq9574: Add icc provider ability to gcc
dt-bindings: interconnect: Add Qualcomm IPQ9574 support
arm64: dts: qcom: sm8150: Add video clock controller node
arm64: dts: qcom: pm6150: Add vibrator
...
This commit is contained in:
Linus Torvalds
commit
e3950967f6
811 changed files with 60580 additions and 10014 deletions
1
.mailmap
1
.mailmap
|
|
@ -386,6 +386,7 @@ Lior David <quic_liord@quicinc.com> <liord@codeaurora.org>
|
|||
Lorenzo Pieralisi <lpieralisi@kernel.org> <lorenzo.pieralisi@arm.com>
|
||||
Lorenzo Stoakes <lorenzo.stoakes@oracle.com> <lstoakes@gmail.com>
|
||||
Luca Ceresoli <luca.ceresoli@bootlin.com> <luca@lucaceresoli.net>
|
||||
Luca Weiss <luca@lucaweiss.eu> <luca@z3ntu.xyz>
|
||||
Lukasz Luba <lukasz.luba@arm.com> <l.luba@partner.samsung.com>
|
||||
Luo Jie <quic_luoj@quicinc.com> <luoj@codeaurora.org>
|
||||
Maciej W. Rozycki <macro@mips.com> <macro@imgtec.com>
|
||||
|
|
|
|||
|
|
@ -22,6 +22,10 @@ properties:
|
|||
- enum:
|
||||
- airoha,en7523-evb
|
||||
- const: airoha,en7523
|
||||
- items:
|
||||
- enum:
|
||||
- airoha,en7581-evb
|
||||
- const: airoha,en7581
|
||||
|
||||
additionalProperties: true
|
||||
|
||||
|
|
|
|||
|
|
@ -91,6 +91,7 @@ properties:
|
|||
- libretech,aml-s905x-cc
|
||||
- libretech,aml-s905x-cc-v2
|
||||
- nexbox,a95x
|
||||
- osmc,vero4k
|
||||
- const: amlogic,s905x
|
||||
- const: amlogic,meson-gxl
|
||||
|
||||
|
|
@ -107,6 +108,13 @@ properties:
|
|||
- const: amlogic,s905d
|
||||
- const: amlogic,meson-gxl
|
||||
|
||||
- description: Boards with the Amlogic Meson GXLX S905L SoC
|
||||
items:
|
||||
- enum:
|
||||
- amlogic,p271
|
||||
- const: amlogic,s905l
|
||||
- const: amlogic,meson-gxlx
|
||||
|
||||
- description: Boards with the Amlogic Meson GXM S912 SoC
|
||||
items:
|
||||
- enum:
|
||||
|
|
@ -169,6 +177,8 @@ properties:
|
|||
- azw,gtking
|
||||
- azw,gtking-pro
|
||||
- bananapi,bpi-m2s
|
||||
- dream,dreambox-one
|
||||
- dream,dreambox-two
|
||||
- hardkernel,odroid-go-ultra
|
||||
- hardkernel,odroid-n2
|
||||
- hardkernel,odroid-n2l
|
||||
|
|
|
|||
|
|
@ -0,0 +1,61 @@
|
|||
# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
|
||||
%YAML 1.2
|
||||
---
|
||||
$id: http://devicetree.org/schemas/arm/arm,juno-fpga-apb-regs.yaml#
|
||||
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
||||
|
||||
title: ARM Juno FPGA APB Registers
|
||||
|
||||
maintainers:
|
||||
- Sudeep Holla <sudeep.holla@arm.com>
|
||||
|
||||
properties:
|
||||
compatible:
|
||||
items:
|
||||
- const: arm,juno-fpga-apb-regs
|
||||
- const: syscon
|
||||
- const: simple-mfd
|
||||
|
||||
reg:
|
||||
maxItems: 1
|
||||
|
||||
ranges: true
|
||||
|
||||
"#address-cells":
|
||||
const: 1
|
||||
|
||||
"#size-cells":
|
||||
const: 1
|
||||
|
||||
patternProperties:
|
||||
"^led@[0-9a-f]+,[0-9a-f]$":
|
||||
$ref: /schemas/leds/register-bit-led.yaml#
|
||||
|
||||
required:
|
||||
- compatible
|
||||
- reg
|
||||
- ranges
|
||||
- "#address-cells"
|
||||
- "#size-cells"
|
||||
|
||||
additionalProperties: false
|
||||
|
||||
examples:
|
||||
- |
|
||||
syscon@10000 {
|
||||
compatible = "arm,juno-fpga-apb-regs", "syscon", "simple-mfd";
|
||||
reg = <0x010000 0x1000>;
|
||||
ranges = <0x0 0x10000 0x1000>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
led@8,0 {
|
||||
compatible = "register-bit-led";
|
||||
reg = <0x08 0x04>;
|
||||
offset = <0x08>;
|
||||
mask = <0x01>;
|
||||
label = "vexpress:0";
|
||||
linux,default-trigger = "heartbeat";
|
||||
default-state = "on";
|
||||
};
|
||||
};
|
||||
|
|
@ -8,7 +8,6 @@ title: Freescale i.MX Platforms
|
|||
|
||||
maintainers:
|
||||
- Shawn Guo <shawnguo@kernel.org>
|
||||
- Li Yang <leoyang.li@nxp.com>
|
||||
|
||||
properties:
|
||||
$nodename:
|
||||
|
|
@ -363,6 +362,12 @@ properties:
|
|||
- const: gw,ventana
|
||||
- const: fsl,imx6q
|
||||
|
||||
- description: i.MX6Q Kontron SMARC-sAMX6i on SMARC Eval Carrier 2.0
|
||||
items:
|
||||
- const: kontron,imx6q-samx6i-ads2
|
||||
- const: kontron,imx6q-samx6i
|
||||
- const: fsl,imx6q
|
||||
|
||||
- description: i.MX6Q PHYTEC phyBOARD-Mira
|
||||
items:
|
||||
- enum:
|
||||
|
|
@ -544,6 +549,12 @@ properties:
|
|||
- const: gw,ventana
|
||||
- const: fsl,imx6dl
|
||||
|
||||
- description: i.MX6DL Kontron SMARC-sAMX6i on SMARC Eval Carrier 2.0
|
||||
items:
|
||||
- const: kontron,imx6dl-samx6i-ads2
|
||||
- const: kontron,imx6dl-samx6i
|
||||
- const: fsl,imx6dl
|
||||
|
||||
- description: i.MX6DL PHYTEC phyBOARD-Mira
|
||||
items:
|
||||
- enum:
|
||||
|
|
@ -946,6 +957,13 @@ properties:
|
|||
- prt,prt8mm # i.MX8MM Protonic PRT8MM Board
|
||||
- const: fsl,imx8mm
|
||||
|
||||
- description: Compulab i.MX8MM UCM SoM based boards
|
||||
items:
|
||||
- enum:
|
||||
- compulab,imx8mm-iot-gateway # i.MX8MM Compulab IoT-Gateway
|
||||
- const: compulab,imx8mm-ucm-som # i.MX8MM Compulab UCM SoM
|
||||
- const: fsl,imx8mm
|
||||
|
||||
- description: Emtop i.MX8MM based Boards
|
||||
items:
|
||||
- const: ees,imx8mm-emtop-baseboard # i.MX8MM Emtop SoM on i.MX8M Mini Baseboard V1
|
||||
|
|
@ -1145,8 +1163,9 @@ properties:
|
|||
version as an industrial computing device.
|
||||
items:
|
||||
- enum:
|
||||
- tq,imx8mp-tqma8mpql-mba8mpxl # TQ-Systems GmbH i.MX8MP TQMa8MPQL SOM on MBa8MPxL
|
||||
- const: tq,imx8mp-tqma8mpql # TQ-Systems GmbH i.MX8MP TQMa8MPQL SOM
|
||||
- tq,imx8mp-tqma8mpql-mba8mpxl # TQ-Systems GmbH i.MX8MP TQMa8MPQL SOM on MBa8MPxL
|
||||
- tq,imx8mp-tqma8mpql-mba8mp-ras314 # TQ-Systems GmbH i.MX8MP TQMa8MPQL SOM on MBa8MP-RAS314
|
||||
- const: tq,imx8mp-tqma8mpql # TQ-Systems GmbH i.MX8MP TQMa8MPQL SOM
|
||||
- const: fsl,imx8mp
|
||||
|
||||
- description: i.MX8MQ based Boards
|
||||
|
|
@ -1272,9 +1291,16 @@ properties:
|
|||
- description: i.MX93 based Boards
|
||||
items:
|
||||
- enum:
|
||||
- fsl,imx93-9x9-qsb # i.MX93 9x9 QSB Board
|
||||
- fsl,imx93-11x11-evk # i.MX93 11x11 EVK Board
|
||||
- const: fsl,imx93
|
||||
|
||||
- description: i.MX95 based Boards
|
||||
items:
|
||||
- enum:
|
||||
- fsl,imx95-19x19-evk # i.MX95 19x19 EVK Board
|
||||
- const: fsl,imx95
|
||||
|
||||
- description: i.MXRT1050 based Boards
|
||||
items:
|
||||
- enum:
|
||||
|
|
|
|||
|
|
@ -82,4 +82,22 @@ properties:
|
|||
- const: marvell,armada-ap807-quad
|
||||
- const: marvell,armada-ap807
|
||||
|
||||
- description:
|
||||
SolidRun CN9130 SoM based single-board computers
|
||||
items:
|
||||
- enum:
|
||||
- solidrun,cn9130-clearfog-base
|
||||
- solidrun,cn9130-clearfog-pro
|
||||
- solidrun,cn9131-solidwan
|
||||
- const: solidrun,cn9130-sr-som
|
||||
- const: marvell,cn9130
|
||||
|
||||
- description:
|
||||
SolidRun CN9132 COM-Express Type 7 based single-board computers
|
||||
items:
|
||||
- enum:
|
||||
- solidrun,cn9132-clearfog
|
||||
- const: solidrun,cn9132-sr-cex7
|
||||
- const: marvell,cn9130
|
||||
|
||||
additionalProperties: true
|
||||
|
|
|
|||
|
|
@ -85,12 +85,15 @@ properties:
|
|||
- const: mediatek,mt7629
|
||||
- items:
|
||||
- enum:
|
||||
- cudy,wr3000-v1
|
||||
- openwrt,one
|
||||
- xiaomi,ax3000t
|
||||
- const: mediatek,mt7981b
|
||||
- items:
|
||||
- enum:
|
||||
- acelink,ew-7886cax
|
||||
- bananapi,bpi-r3
|
||||
- bananapi,bpi-r3mini
|
||||
- mediatek,mt7986a-rfb
|
||||
- const: mediatek,mt7986a
|
||||
- items:
|
||||
|
|
@ -293,6 +296,13 @@ properties:
|
|||
- const: google,tentacruel-sku327683
|
||||
- const: google,tentacruel
|
||||
- const: mediatek,mt8186
|
||||
- description: Google Voltorb (Acer Chromebook 311 C723/C732T)
|
||||
items:
|
||||
- enum:
|
||||
- google,voltorb-sku589824
|
||||
- google,voltorb-sku589825
|
||||
- const: google,voltorb
|
||||
- const: mediatek,mt8186
|
||||
- items:
|
||||
- enum:
|
||||
- mediatek,mt8186-evb
|
||||
|
|
@ -342,6 +352,14 @@ properties:
|
|||
- const: google,tomato-rev3
|
||||
- const: google,tomato
|
||||
- const: mediatek,mt8195
|
||||
- description: HP Dojo sku1, 3, 5, 7 (HP Chromebook x360 13b-ca0002sa)
|
||||
items:
|
||||
- const: google,dojo-sku7
|
||||
- const: google,dojo-sku5
|
||||
- const: google,dojo-sku3
|
||||
- const: google,dojo-sku1
|
||||
- const: google,dojo
|
||||
- const: mediatek,mt8195
|
||||
- items:
|
||||
- enum:
|
||||
- mediatek,mt8195-demo
|
||||
|
|
@ -353,6 +371,12 @@ properties:
|
|||
- const: mediatek,mt8365
|
||||
- items:
|
||||
- enum:
|
||||
- mediatek,mt8390-evk
|
||||
- const: mediatek,mt8390
|
||||
- const: mediatek,mt8188
|
||||
- items:
|
||||
- enum:
|
||||
- kontron,3-5-sbc-i1200
|
||||
- mediatek,mt8395-evk
|
||||
- radxa,nio-12l
|
||||
- const: mediatek,mt8395
|
||||
|
|
|
|||
|
|
@ -42,6 +42,7 @@ description: |
|
|||
msm8996
|
||||
msm8998
|
||||
qcs404
|
||||
qcs8550
|
||||
qcm2290
|
||||
qcm6490
|
||||
qdu1000
|
||||
|
|
@ -96,6 +97,7 @@ properties:
|
|||
- items:
|
||||
- enum:
|
||||
- qcom,apq8016-sbc
|
||||
- schneider,apq8016-hmibsc
|
||||
- const: qcom,apq8016
|
||||
|
||||
- items:
|
||||
|
|
@ -104,6 +106,7 @@ properties:
|
|||
- huawei,sturgeon
|
||||
- lg,lenok
|
||||
- samsung,matisse-wifi
|
||||
- samsung,milletwifi
|
||||
- const: qcom,apq8026
|
||||
|
||||
- items:
|
||||
|
|
@ -138,6 +141,7 @@ properties:
|
|||
- microsoft,makepeace
|
||||
- microsoft,moneypenny
|
||||
- motorola,falcon
|
||||
- samsung,ms013g
|
||||
- samsung,s3ve3g
|
||||
- const: qcom,msm8226
|
||||
|
||||
|
|
@ -175,6 +179,7 @@ properties:
|
|||
- items:
|
||||
- enum:
|
||||
- lge,hammerhead
|
||||
- samsung,hlte
|
||||
- sony,xperia-amami
|
||||
- sony,xperia-honami
|
||||
- const: qcom,msm8974
|
||||
|
|
@ -182,8 +187,10 @@ properties:
|
|||
- items:
|
||||
- enum:
|
||||
- fairphone,fp2
|
||||
- htc,m8
|
||||
- oneplus,bacon
|
||||
- samsung,klte
|
||||
- sony,xperia-aries
|
||||
- sony,xperia-castor
|
||||
- sony,xperia-leo
|
||||
- const: qcom,msm8974pro
|
||||
|
|
@ -203,8 +210,13 @@ properties:
|
|||
- asus,z00l
|
||||
- gplus,fl8005a
|
||||
- huawei,g7
|
||||
- lg,c50
|
||||
- lg,m216
|
||||
- longcheer,l8910
|
||||
- longcheer,l8150
|
||||
- motorola,harpia
|
||||
- motorola,osprey
|
||||
- motorola,surnia
|
||||
- qcom,msm8916-mtp
|
||||
- samsung,a3u-eur
|
||||
- samsung,a5u-eur
|
||||
|
|
@ -316,6 +328,7 @@ properties:
|
|||
- items:
|
||||
- enum:
|
||||
- qcom,ipq5018-rdp432-c2
|
||||
- tplink,archer-ax55-v1
|
||||
- const: qcom,ipq5018
|
||||
|
||||
- items:
|
||||
|
|
@ -366,6 +379,7 @@ properties:
|
|||
- fairphone,fp5
|
||||
- qcom,qcm6490-idp
|
||||
- qcom,qcs6490-rb3gen2
|
||||
- shift,otter
|
||||
- const: qcom,qcm6490
|
||||
|
||||
- description: Qualcomm Technologies, Inc. Distributed Unit 1000 platform
|
||||
|
|
@ -802,6 +816,7 @@ properties:
|
|||
|
||||
- items:
|
||||
- enum:
|
||||
- lenovo,tbx605f
|
||||
- motorola,ali
|
||||
- const: qcom,sdm450
|
||||
|
||||
|
|
@ -883,6 +898,7 @@ properties:
|
|||
- items:
|
||||
- enum:
|
||||
- qcom,sa8775p-ride
|
||||
- qcom,sa8775p-ride-r3
|
||||
- const: qcom,sa8775p
|
||||
|
||||
- items:
|
||||
|
|
@ -1004,17 +1020,28 @@ properties:
|
|||
- qcom,sm8550-hdk
|
||||
- qcom,sm8550-mtp
|
||||
- qcom,sm8550-qrd
|
||||
- samsung,q5q
|
||||
- sony,pdx234
|
||||
- const: qcom,sm8550
|
||||
|
||||
- items:
|
||||
- enum:
|
||||
- qcom,qcs8550-aim300-aiot
|
||||
- const: qcom,qcs8550-aim300
|
||||
- const: qcom,qcs8550
|
||||
- const: qcom,sm8550
|
||||
|
||||
- items:
|
||||
- enum:
|
||||
- qcom,sm8650-hdk
|
||||
- qcom,sm8650-mtp
|
||||
- qcom,sm8650-qrd
|
||||
- const: qcom,sm8650
|
||||
|
||||
- items:
|
||||
- enum:
|
||||
- asus,vivobook-s15
|
||||
- lenovo,yoga-slim7x
|
||||
- qcom,x1e80100-crd
|
||||
- qcom,x1e80100-qcp
|
||||
- const: qcom,x1e80100
|
||||
|
|
|
|||
|
|
@ -248,6 +248,13 @@ properties:
|
|||
- const: friendlyarm,nanopc-t6
|
||||
- const: rockchip,rk3588
|
||||
|
||||
- description: FriendlyElec CM3588-based boards
|
||||
items:
|
||||
- enum:
|
||||
- friendlyarm,cm3588-nas
|
||||
- const: friendlyarm,cm3588
|
||||
- const: rockchip,rk3588
|
||||
|
||||
- description: GameForce Chi
|
||||
items:
|
||||
- const: gameforce,chi
|
||||
|
|
@ -627,6 +634,11 @@ properties:
|
|||
- const: mqmaker,miqi
|
||||
- const: rockchip,rk3288
|
||||
|
||||
- description: Neardi LBA3368
|
||||
items:
|
||||
- const: neardi,lba3368
|
||||
- const: rockchip,rk3368
|
||||
|
||||
- description: Netxeon R89 board
|
||||
items:
|
||||
- const: netxeon,r89
|
||||
|
|
@ -799,11 +811,21 @@ properties:
|
|||
- const: radxa,rock3a
|
||||
- const: rockchip,rk3568
|
||||
|
||||
- description: Radxa ROCK 3B
|
||||
items:
|
||||
- const: radxa,rock-3b
|
||||
- const: rockchip,rk3568
|
||||
|
||||
- description: Radxa ROCK 3C
|
||||
items:
|
||||
- const: radxa,rock-3c
|
||||
- const: rockchip,rk3566
|
||||
|
||||
- description: Radxa ROCK 5 ITX
|
||||
items:
|
||||
- const: radxa,rock-5-itx
|
||||
- const: rockchip,rk3588
|
||||
|
||||
- description: Radxa ROCK 5A
|
||||
items:
|
||||
- const: radxa,rock-5a
|
||||
|
|
@ -814,6 +836,18 @@ properties:
|
|||
- const: radxa,rock-5b
|
||||
- const: rockchip,rk3588
|
||||
|
||||
- description: Radxa ROCK S0
|
||||
items:
|
||||
- const: radxa,rock-s0
|
||||
- const: rockchip,rk3308
|
||||
|
||||
- description: Radxa ZERO 3W/3E
|
||||
items:
|
||||
- enum:
|
||||
- radxa,zero-3e
|
||||
- radxa,zero-3w
|
||||
- const: rockchip,rk3566
|
||||
|
||||
- description: Rikomagic MK808 v1
|
||||
items:
|
||||
- const: rikomagic,mk808
|
||||
|
|
@ -959,6 +993,14 @@ properties:
|
|||
- const: wolfvision,rk3568-pf5
|
||||
- const: rockchip,rk3568
|
||||
|
||||
- description: Xunlong Orange Pi 3B
|
||||
items:
|
||||
- enum:
|
||||
- xunlong,orangepi-3b-v1.1
|
||||
- xunlong,orangepi-3b-v2.1
|
||||
- const: xunlong,orangepi-3b
|
||||
- const: rockchip,rk3566
|
||||
|
||||
- description: Xunlong Orange Pi 5 Plus
|
||||
items:
|
||||
- const: xunlong,orangepi-5-plus
|
||||
|
|
|
|||
|
|
@ -59,6 +59,12 @@ properties:
|
|||
- prt,prtt1s # Protonic PRTT1S
|
||||
- const: st,stm32mp151
|
||||
|
||||
- description: DH STM32MP135 DHCOR SoM based Boards
|
||||
items:
|
||||
- const: dh,stm32mp135f-dhcor-dhsbc
|
||||
- const: dh,stm32mp135f-dhcor-som
|
||||
- const: st,stm32mp135
|
||||
|
||||
- description: DH STM32MP151 DHCOR SoM based Boards
|
||||
items:
|
||||
- const: dh,stm32mp151a-dhcor-testbench
|
||||
|
|
|
|||
|
|
@ -708,12 +708,12 @@ properties:
|
|||
- const: olimex,a64-teres-i
|
||||
- const: allwinner,sun50i-a64
|
||||
|
||||
- description: Pine64
|
||||
- description: Pine64 PINE A64
|
||||
items:
|
||||
- const: pine64,pine64
|
||||
- const: allwinner,sun50i-a64
|
||||
|
||||
- description: Pine64+
|
||||
- description: Pine64 PINE A64+
|
||||
items:
|
||||
- const: pine64,pine64-plus
|
||||
- const: allwinner,sun50i-a64
|
||||
|
|
@ -724,17 +724,17 @@ properties:
|
|||
- const: sochip,s3
|
||||
- const: allwinner,sun8i-v3
|
||||
|
||||
- description: Pine64 PineH64 model A
|
||||
- description: Pine64 PINE H64 Model A
|
||||
items:
|
||||
- const: pine64,pine-h64
|
||||
- const: allwinner,sun50i-h6
|
||||
|
||||
- description: Pine64 PineH64 model B
|
||||
- description: Pine64 PINE H64 Model B
|
||||
items:
|
||||
- const: pine64,pine-h64-model-b
|
||||
- const: allwinner,sun50i-h6
|
||||
|
||||
- description: Pine64 LTS
|
||||
- description: Pine64 PINE A64 LTS
|
||||
items:
|
||||
- const: pine64,pine64-lts
|
||||
- const: allwinner,sun50i-r18
|
||||
|
|
@ -763,17 +763,17 @@ properties:
|
|||
- const: pine64,pinephone
|
||||
- const: allwinner,sun50i-a64
|
||||
|
||||
- description: Pine64 PineTab, Development Sample
|
||||
- description: Pine64 PineTab Developer Sample
|
||||
items:
|
||||
- const: pine64,pinetab
|
||||
- const: allwinner,sun50i-a64
|
||||
|
||||
- description: Pine64 PineTab, Early Adopter's batch (and maybe later ones)
|
||||
- description: Pine64 PineTab Early Adopter
|
||||
items:
|
||||
- const: pine64,pinetab-early-adopter
|
||||
- const: allwinner,sun50i-a64
|
||||
|
||||
- description: Pine64 SoPine Baseboard
|
||||
- description: Pine64 SOPINE
|
||||
items:
|
||||
- const: pine64,sopine-baseboard
|
||||
- const: pine64,sopine
|
||||
|
|
|
|||
|
|
@ -25,6 +25,12 @@ properties:
|
|||
- ti,am62a7-sk
|
||||
- const: ti,am62a7
|
||||
|
||||
- description: K3 AM62A7 SoC PHYTEC phyBOARD-Lyra
|
||||
items:
|
||||
- const: phytec,am62a7-phyboard-lyra-rdk
|
||||
- const: phytec,am62a-phycore-som
|
||||
- const: ti,am62a7
|
||||
|
||||
- description: K3 AM62P5 SoC and Boards
|
||||
items:
|
||||
- enum:
|
||||
|
|
|
|||
|
|
@ -33,6 +33,9 @@ properties:
|
|||
- description: PCIE30 PHY3 pipe clock source
|
||||
- description: USB3 PHY pipe clock source
|
||||
|
||||
'#interconnect-cells':
|
||||
const: 1
|
||||
|
||||
required:
|
||||
- compatible
|
||||
- clocks
|
||||
|
|
|
|||
|
|
@ -0,0 +1,77 @@
|
|||
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
|
||||
%YAML 1.2
|
||||
---
|
||||
$id: http://devicetree.org/schemas/clock/qcom,qcm2290-gpucc.yaml#
|
||||
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
||||
|
||||
title: Qualcomm Graphics Clock & Reset Controller on QCM2290
|
||||
|
||||
maintainers:
|
||||
- Konrad Dybcio <konradybcio@kernel.org>
|
||||
|
||||
description: |
|
||||
Qualcomm graphics clock control module provides the clocks, resets and power
|
||||
domains on Qualcomm SoCs.
|
||||
|
||||
See also::
|
||||
include/dt-bindings/clock/qcom,qcm2290-gpucc.h
|
||||
|
||||
properties:
|
||||
compatible:
|
||||
const: qcom,qcm2290-gpucc
|
||||
|
||||
reg:
|
||||
maxItems: 1
|
||||
|
||||
clocks:
|
||||
items:
|
||||
- description: AHB interface clock,
|
||||
- description: SoC CXO clock
|
||||
- description: GPLL0 main branch source
|
||||
- description: GPLL0 div branch source
|
||||
|
||||
power-domains:
|
||||
description:
|
||||
A phandle and PM domain specifier for the CX power domain.
|
||||
maxItems: 1
|
||||
|
||||
required-opps:
|
||||
description:
|
||||
A phandle to an OPP node describing required CX performance point.
|
||||
maxItems: 1
|
||||
|
||||
required:
|
||||
- compatible
|
||||
- clocks
|
||||
- power-domains
|
||||
|
||||
allOf:
|
||||
- $ref: qcom,gcc.yaml#
|
||||
|
||||
unevaluatedProperties: false
|
||||
|
||||
examples:
|
||||
- |
|
||||
#include <dt-bindings/clock/qcom,gcc-qcm2290.h>
|
||||
#include <dt-bindings/clock/qcom,rpmcc.h>
|
||||
#include <dt-bindings/power/qcom-rpmpd.h>
|
||||
|
||||
soc {
|
||||
#address-cells = <2>;
|
||||
#size-cells = <2>;
|
||||
|
||||
clock-controller@5990000 {
|
||||
compatible = "qcom,qcm2290-gpucc";
|
||||
reg = <0x0 0x05990000 0x0 0x9000>;
|
||||
clocks = <&gcc GCC_GPU_CFG_AHB_CLK>,
|
||||
<&rpmcc RPM_SMD_XO_CLK_SRC>,
|
||||
<&gcc GCC_GPU_GPLL0_CLK_SRC>,
|
||||
<&gcc GCC_GPU_GPLL0_DIV_CLK_SRC>;
|
||||
power-domains = <&rpmpd QCM2290_VDDCX>;
|
||||
required-opps = <&rpmpd_opp_low_svs>;
|
||||
#clock-cells = <1>;
|
||||
#reset-cells = <1>;
|
||||
#power-domain-cells = <1>;
|
||||
};
|
||||
};
|
||||
...
|
||||
|
|
@ -8,15 +8,17 @@ title: Qualcomm Camera Clock & Reset Controller on SM8450
|
|||
|
||||
maintainers:
|
||||
- Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
|
||||
- Jagadeesh Kona <quic_jkona@quicinc.com>
|
||||
|
||||
description: |
|
||||
Qualcomm camera clock control module provides the clocks, resets and power
|
||||
domains on SM8450.
|
||||
|
||||
See also::
|
||||
See also:
|
||||
include/dt-bindings/clock/qcom,sc8280xp-camcc.h
|
||||
include/dt-bindings/clock/qcom,sm8450-camcc.h
|
||||
include/dt-bindings/clock/qcom,sm8550-camcc.h
|
||||
include/dt-bindings/clock/qcom,sc8280xp-camcc.h
|
||||
include/dt-bindings/clock/qcom,sm8650-camcc.h
|
||||
include/dt-bindings/clock/qcom,x1e80100-camcc.h
|
||||
|
||||
allOf:
|
||||
|
|
@ -28,6 +30,7 @@ properties:
|
|||
- qcom,sc8280xp-camcc
|
||||
- qcom,sm8450-camcc
|
||||
- qcom,sm8550-camcc
|
||||
- qcom,sm8650-camcc
|
||||
- qcom,x1e80100-camcc
|
||||
|
||||
clocks:
|
||||
|
|
|
|||
|
|
@ -8,18 +8,22 @@ title: Qualcomm Video Clock & Reset Controller on SM8450
|
|||
|
||||
maintainers:
|
||||
- Taniya Das <quic_tdas@quicinc.com>
|
||||
- Jagadeesh Kona <quic_jkona@quicinc.com>
|
||||
|
||||
description: |
|
||||
Qualcomm video clock control module provides the clocks, resets and power
|
||||
domains on SM8450.
|
||||
|
||||
See also:: include/dt-bindings/clock/qcom,videocc-sm8450.h
|
||||
See also:
|
||||
include/dt-bindings/clock/qcom,sm8450-videocc.h
|
||||
include/dt-bindings/clock/qcom,sm8650-videocc.h
|
||||
|
||||
properties:
|
||||
compatible:
|
||||
enum:
|
||||
- qcom,sm8450-videocc
|
||||
- qcom,sm8550-videocc
|
||||
- qcom,sm8650-videocc
|
||||
|
||||
reg:
|
||||
maxItems: 1
|
||||
|
|
|
|||
|
|
@ -0,0 +1,55 @@
|
|||
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
|
||||
%YAML 1.2
|
||||
---
|
||||
$id: http://devicetree.org/schemas/fuse/renesas,rcar-efuse.yaml#
|
||||
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
||||
|
||||
title: R-Car E-FUSE connected to PFC
|
||||
|
||||
maintainers:
|
||||
- Geert Uytterhoeven <geert+renesas@glider.be>
|
||||
|
||||
description:
|
||||
The E-FUSE is a type of non-volatile memory, which is accessible through the
|
||||
Pin Function Controller (PFC) on some R-Car Gen4 SoCs.
|
||||
|
||||
properties:
|
||||
compatible:
|
||||
enum:
|
||||
- renesas,r8a779a0-efuse # R-Car V3U
|
||||
- renesas,r8a779f0-efuse # R-Car S4-8
|
||||
|
||||
reg:
|
||||
maxItems: 1
|
||||
description: PFC System Group Fuse Control and Monitor register block
|
||||
|
||||
clocks:
|
||||
maxItems: 1
|
||||
|
||||
power-domains:
|
||||
maxItems: 1
|
||||
|
||||
resets:
|
||||
maxItems: 1
|
||||
|
||||
required:
|
||||
- compatible
|
||||
- reg
|
||||
- clocks
|
||||
- power-domains
|
||||
- resets
|
||||
|
||||
additionalProperties: false
|
||||
|
||||
examples:
|
||||
- |
|
||||
#include <dt-bindings/clock/r8a779a0-cpg-mssr.h>
|
||||
#include <dt-bindings/power/r8a779a0-sysc.h>
|
||||
|
||||
fuse: fuse@e6078800 {
|
||||
compatible = "renesas,r8a779a0-efuse";
|
||||
reg = <0xe6078800 0x100>;
|
||||
clocks = <&cpg CPG_MOD 916>;
|
||||
power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
|
||||
resets = <&cpg 916>;
|
||||
};
|
||||
38
Documentation/devicetree/bindings/fuse/renesas,rcar-otp.yaml
Normal file
38
Documentation/devicetree/bindings/fuse/renesas,rcar-otp.yaml
Normal file
|
|
@ -0,0 +1,38 @@
|
|||
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
|
||||
%YAML 1.2
|
||||
---
|
||||
$id: http://devicetree.org/schemas/fuse/renesas,rcar-otp.yaml#
|
||||
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
||||
|
||||
title: R-Car E-FUSE connected to OTP_MEM
|
||||
|
||||
maintainers:
|
||||
- Geert Uytterhoeven <geert+renesas@glider.be>
|
||||
|
||||
description:
|
||||
The E-FUSE is a type of non-volatile memory, which is accessible through the
|
||||
One-Time Programmable Memory (OTP_MEM) module on some R-Car Gen4 SoCs.
|
||||
|
||||
properties:
|
||||
compatible:
|
||||
enum:
|
||||
- renesas,r8a779g0-otp # R-CarV4H
|
||||
- renesas,r8a779h0-otp # R-CarV4M
|
||||
|
||||
reg:
|
||||
items:
|
||||
- description: OTP_MEM_0
|
||||
- description: OTP_MEM_1
|
||||
|
||||
required:
|
||||
- compatible
|
||||
- reg
|
||||
|
||||
additionalProperties: false
|
||||
|
||||
examples:
|
||||
- |
|
||||
otp: otp@e61be000 {
|
||||
compatible = "renesas,r8a779g0-otp";
|
||||
reg = <0xe61be000 0x1000>, <0xe61bf000 0x1000>;
|
||||
};
|
||||
|
|
@ -22,7 +22,9 @@ properties:
|
|||
- const: allwinner,sun8i-a83t-r-lradc
|
||||
- const: allwinner,sun50i-r329-lradc
|
||||
- items:
|
||||
- const: allwinner,sun20i-d1-lradc
|
||||
- enum:
|
||||
- allwinner,sun50i-h616-lradc
|
||||
- allwinner,sun20i-d1-lradc
|
||||
- const: allwinner,sun50i-r329-lradc
|
||||
|
||||
reg:
|
||||
|
|
|
|||
|
|
@ -8,7 +8,6 @@ title: Freescale Layerscape External Interrupt Controller
|
|||
|
||||
maintainers:
|
||||
- Shawn Guo <shawnguo@kernel.org>
|
||||
- Li Yang <leoyang.li@nxp.com>
|
||||
|
||||
description: |
|
||||
Some Layerscape SOCs (LS1021A, LS1043A, LS1046A LS1088A, LS208xA,
|
||||
|
|
|
|||
|
|
@ -1,38 +0,0 @@
|
|||
Marvell Armada 370, 375, 38x, XP Interrupt Controller
|
||||
-----------------------------------------------------
|
||||
|
||||
Required properties:
|
||||
- compatible: Should be "marvell,mpic"
|
||||
- interrupt-controller: Identifies the node as an interrupt controller.
|
||||
- msi-controller: Identifies the node as an PCI Message Signaled
|
||||
Interrupt controller.
|
||||
- #interrupt-cells: The number of cells to define the interrupts. Should be 1.
|
||||
The cell is the IRQ number
|
||||
|
||||
- reg: Should contain PMIC registers location and length. First pair
|
||||
for the main interrupt registers, second pair for the per-CPU
|
||||
interrupt registers. For this last pair, to be compliant with SMP
|
||||
support, the "virtual" must be use (For the record, these registers
|
||||
automatically map to the interrupt controller registers of the
|
||||
current CPU)
|
||||
|
||||
Optional properties:
|
||||
|
||||
- interrupts: If defined, then it indicates that this MPIC is
|
||||
connected as a slave to another interrupt controller. This is
|
||||
typically the case on Armada 375 and Armada 38x, where the MPIC is
|
||||
connected as a slave to the Cortex-A9 GIC. The provided interrupt
|
||||
indicate to which GIC interrupt the MPIC output is connected.
|
||||
|
||||
Example:
|
||||
|
||||
mpic: interrupt-controller@d0020000 {
|
||||
compatible = "marvell,mpic";
|
||||
#interrupt-cells = <1>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
interrupt-controller;
|
||||
msi-controller;
|
||||
reg = <0xd0020a00 0x1d0>,
|
||||
<0xd0021070 0x58>;
|
||||
};
|
||||
|
|
@ -0,0 +1,63 @@
|
|||
# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
|
||||
%YAML 1.2
|
||||
---
|
||||
$id: http://devicetree.org/schemas/interrupt-controller/marvell,mpic.yaml#
|
||||
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
||||
|
||||
title: Marvell Armada 370, 375, 38x, 39x, XP Interrupt Controller
|
||||
|
||||
maintainers:
|
||||
- Marek Behún <kabel@kernel.org>
|
||||
|
||||
description: |
|
||||
The top-level interrupt controller on Marvell Armada 370 and XP. On these
|
||||
platforms it also provides inter-processor interrupts.
|
||||
|
||||
On Marvell Armada 375, 38x and 39x this controller is wired under ARM GIC.
|
||||
|
||||
Provides MSI handling for the PCIe controllers.
|
||||
|
||||
properties:
|
||||
compatible:
|
||||
const: marvell,mpic
|
||||
|
||||
reg:
|
||||
items:
|
||||
- description: main registers
|
||||
- description: per-cpu registers
|
||||
|
||||
interrupts:
|
||||
items:
|
||||
- description: |
|
||||
Parent interrupt on platforms where MPIC is not the top-level
|
||||
interrupt controller.
|
||||
|
||||
interrupt-controller: true
|
||||
|
||||
'#interrupt-cells':
|
||||
const: 1
|
||||
|
||||
msi-controller: true
|
||||
|
||||
required:
|
||||
- compatible
|
||||
- reg
|
||||
- interrupt-controller
|
||||
- '#interrupt-cells'
|
||||
- msi-controller
|
||||
|
||||
additionalProperties: false
|
||||
|
||||
examples:
|
||||
- |
|
||||
#include <dt-bindings/interrupt-controller/arm-gic.h>
|
||||
#include <dt-bindings/interrupt-controller/irq.h>
|
||||
|
||||
interrupt-controller@20a00 {
|
||||
compatible = "marvell,mpic";
|
||||
reg = <0x20a00 0x2d0>, <0x21070 0x58>;
|
||||
interrupts = <GIC_PPI 15 IRQ_TYPE_LEVEL_HIGH>;
|
||||
interrupt-controller;
|
||||
#interrupt-cells = <1>;
|
||||
msi-controller;
|
||||
};
|
||||
|
|
@ -47,6 +47,7 @@ properties:
|
|||
- sifive,u74
|
||||
- sifive,u74-mc
|
||||
- thead,c906
|
||||
- thead,c908
|
||||
- thead,c910
|
||||
- thead,c920
|
||||
- const: riscv
|
||||
|
|
|
|||
|
|
@ -29,6 +29,7 @@ properties:
|
|||
- enum:
|
||||
- aldec,tysom-m-mpfs250t-rev2
|
||||
- aries,m100pfsevp
|
||||
- beagle,beaglev-fire
|
||||
- microchip,mpfs-sev-kit
|
||||
- sundance,polarberry
|
||||
- const: microchip,mpfs
|
||||
|
|
|
|||
|
|
@ -27,6 +27,7 @@ properties:
|
|||
- items:
|
||||
- enum:
|
||||
- milkv,mars
|
||||
- pine64,star64
|
||||
- starfive,visionfive-2-v1.2a
|
||||
- starfive,visionfive-2-v1.3b
|
||||
- const: starfive,jh7110
|
||||
|
|
|
|||
|
|
@ -8,7 +8,6 @@ title: Freescale Layerscape Device Configuration Unit
|
|||
|
||||
maintainers:
|
||||
- Shawn Guo <shawnguo@kernel.org>
|
||||
- Li Yang <leoyang.li@nxp.com>
|
||||
|
||||
description: |
|
||||
DCFG is the device configuration unit, that provides general purpose
|
||||
|
|
|
|||
|
|
@ -8,7 +8,6 @@ title: Freescale Layerscape Supplemental Configuration Unit
|
|||
|
||||
maintainers:
|
||||
- Shawn Guo <shawnguo@kernel.org>
|
||||
- Li Yang <leoyang.li@nxp.com>
|
||||
|
||||
description: |
|
||||
SCFG is the supplemental configuration unit, that provides SoC specific
|
||||
|
|
|
|||
|
|
@ -0,0 +1,46 @@
|
|||
# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause
|
||||
%YAML 1.2
|
||||
---
|
||||
$id: http://devicetree.org/schemas/soc/hisilicon/hisilicon,hi3660-usb3-otg-bc.yaml#
|
||||
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
||||
|
||||
title: Hisilicon Kirin 960 USB OTG Battery Charging Syscon
|
||||
|
||||
maintainers:
|
||||
- Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
||||
|
||||
properties:
|
||||
compatible:
|
||||
items:
|
||||
- const: hisilicon,hi3660-usb3-otg-bc
|
||||
- const: syscon
|
||||
- const: simple-mfd
|
||||
|
||||
reg:
|
||||
maxItems: 1
|
||||
|
||||
usb-phy:
|
||||
$ref: /schemas/phy/hisilicon,hi3660-usb3.yaml
|
||||
description: USB Phy node
|
||||
|
||||
required:
|
||||
- compatible
|
||||
- reg
|
||||
- usb-phy
|
||||
|
||||
additionalProperties: false
|
||||
|
||||
examples:
|
||||
- |
|
||||
syscon@ff200000 {
|
||||
compatible = "hisilicon,hi3660-usb3-otg-bc", "syscon", "simple-mfd";
|
||||
reg = <0xff200000 0x1000>;
|
||||
|
||||
usb-phy {
|
||||
compatible = "hisilicon,hi3660-usb-phy";
|
||||
#phy-cells = <0>;
|
||||
hisilicon,pericrg-syscon = <&crg_ctrl>;
|
||||
hisilicon,pctrl-syscon = <&pctrl>;
|
||||
hisilicon,eye-diagram-param = <0x22466e4>;
|
||||
};
|
||||
};
|
||||
|
|
@ -33,6 +33,7 @@ properties:
|
|||
- mediatek,mt8186-disp-mutex
|
||||
- mediatek,mt8186-mdp3-mutex
|
||||
- mediatek,mt8188-disp-mutex
|
||||
- mediatek,mt8188-vpp-mutex
|
||||
- mediatek,mt8192-disp-mutex
|
||||
- mediatek,mt8195-disp-mutex
|
||||
- mediatek,mt8195-vpp-mutex
|
||||
|
|
|
|||
|
|
@ -30,6 +30,15 @@ properties:
|
|||
reg:
|
||||
maxItems: 1
|
||||
|
||||
sti-sasg-codec:
|
||||
description: STi internal audio codec
|
||||
type: object
|
||||
additionalProperties: true
|
||||
|
||||
properties:
|
||||
compatible:
|
||||
const: st,stih407-sas-codec
|
||||
|
||||
required:
|
||||
- compatible
|
||||
- reg
|
||||
|
|
|
|||
|
|
@ -22,6 +22,7 @@ properties:
|
|||
- qcom,msm8974-imem
|
||||
- qcom,qcs404-imem
|
||||
- qcom,qdu1000-imem
|
||||
- qcom,sa8775p-imem
|
||||
- qcom,sc7180-imem
|
||||
- qcom,sc7280-imem
|
||||
- qcom,sdm630-imem
|
||||
|
|
|
|||
|
|
@ -338,6 +338,8 @@ patternProperties:
|
|||
description: Czech Technical University in Prague
|
||||
"^cubietech,.*":
|
||||
description: Cubietech, Ltd.
|
||||
"^cudy,.*":
|
||||
description: Shenzhen Cudy Technology Co., Ltd.
|
||||
"^cui,.*":
|
||||
description: CUI Devices
|
||||
"^cypress,.*":
|
||||
|
|
@ -394,6 +396,8 @@ patternProperties:
|
|||
description: DPTechnics
|
||||
"^dragino,.*":
|
||||
description: Dragino Technology Co., Limited
|
||||
"^dream,.*":
|
||||
description: Dream Property GmbH
|
||||
"^ds,.*":
|
||||
description: DaSheng, Inc.
|
||||
"^dserve,.*":
|
||||
|
|
@ -995,6 +999,8 @@ patternProperties:
|
|||
description: MYIR Tech Limited
|
||||
"^national,.*":
|
||||
description: National Semiconductor
|
||||
"^neardi,.*":
|
||||
description: Shanghai Neardi Technology Co., Ltd.
|
||||
"^nec,.*":
|
||||
description: NEC LCD Technologies, Ltd.
|
||||
"^neonode,.*":
|
||||
|
|
@ -1082,6 +1088,8 @@ patternProperties:
|
|||
description: OpenPandora GmbH
|
||||
"^openrisc,.*":
|
||||
description: OpenRISC.io
|
||||
"^openwrt,.*":
|
||||
description: OpenWrt
|
||||
"^option,.*":
|
||||
description: Option NV
|
||||
"^oranth,.*":
|
||||
|
|
@ -1254,6 +1262,8 @@ patternProperties:
|
|||
description: Smart Battery System
|
||||
"^schindler,.*":
|
||||
description: Schindler
|
||||
"^schneider,.*":
|
||||
description: Schneider Electric
|
||||
"^seagate,.*":
|
||||
description: Seagate Technology PLC
|
||||
"^seeed,.*":
|
||||
|
|
|
|||
42
MAINTAINERS
42
MAINTAINERS
|
|
@ -1909,6 +1909,16 @@ N: allwinner
|
|||
N: sun[x456789]i
|
||||
N: sun[25]0i
|
||||
|
||||
ARM/ALPHASCALE ARCHITECTURE
|
||||
M: Krzysztof Kozlowski <krzk@kernel.org>
|
||||
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
|
||||
S: Odd Fixes
|
||||
F: arch/arm/boot/dts/alphascale/
|
||||
F: drivers/clk/clk-asm9260.c
|
||||
F: drivers/clocksource/asm9260_timer.c
|
||||
F: drivers/rtc/rtc-asm9260.c
|
||||
F: drivers/watchdog/asm9260_wdt.c
|
||||
|
||||
ARM/AMD PENSANDO ARM64 ARCHITECTURE
|
||||
M: Brad Larson <blarson@amd.com>
|
||||
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
|
||||
|
|
@ -2072,6 +2082,14 @@ F: arch/arm/boot/dts/aspeed/
|
|||
F: arch/arm/mach-aspeed/
|
||||
N: aspeed
|
||||
|
||||
ARM/AXM LSI SOC
|
||||
M: Krzysztof Kozlowski <krzk@kernel.org>
|
||||
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
|
||||
S: Odd Fixes
|
||||
F: Documentation/devicetree/bindings/arm/axxia.yaml
|
||||
F: arch/arm/boot/dts/intel/axm/
|
||||
F: arch/arm/mach-axxia/
|
||||
|
||||
ARM/BITMAIN ARCHITECTURE
|
||||
M: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
|
||||
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
|
||||
|
|
@ -2192,6 +2210,7 @@ F: Documentation/devicetree/bindings/bus/moxtet.txt
|
|||
F: Documentation/devicetree/bindings/firmware/cznic,turris-mox-rwtm.txt
|
||||
F: Documentation/devicetree/bindings/firmware/cznic,turris-omnia-mcu.yaml
|
||||
F: Documentation/devicetree/bindings/gpio/gpio-moxtet.txt
|
||||
F: Documentation/devicetree/bindings/interrupt-controller/marvell,mpic.yaml
|
||||
F: Documentation/devicetree/bindings/leds/cznic,turris-omnia-leds.yaml
|
||||
F: Documentation/devicetree/bindings/watchdog/armada-37xx-wdt.txt
|
||||
F: drivers/bus/moxtet.c
|
||||
|
|
@ -2506,6 +2525,15 @@ F: arch/arm/boot/dts/socionext/milbeaut*
|
|||
F: arch/arm/mach-milbeaut/
|
||||
N: milbeaut
|
||||
|
||||
ARM/MOXA ART SOC
|
||||
M: Krzysztof Kozlowski <krzk@kernel.org>
|
||||
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
|
||||
S: Odd Fixes
|
||||
F: Documentation/devicetree/bindings/arm/moxart.yaml
|
||||
F: Documentation/devicetree/bindings/clock/moxa,moxart-clock.txt
|
||||
F: arch/arm/boot/dts/moxa/
|
||||
F: drivers/clk/clk-moxart.c
|
||||
|
||||
ARM/MStar/Sigmastar Armv7 SoC support
|
||||
M: Daniel Palmer <daniel@thingy.jp>
|
||||
M: Romain Perier <romain.perier@gmail.com>
|
||||
|
|
@ -3016,6 +3044,15 @@ F: Documentation/devicetree/bindings/hwinfo/ti,k3-socinfo.yaml
|
|||
F: arch/arm64/boot/dts/ti/Makefile
|
||||
F: arch/arm64/boot/dts/ti/k3-*
|
||||
|
||||
ARM/TEXAS INSTRUMENTS NSPIRE ARCHITECTURE
|
||||
M: Krzysztof Kozlowski <krzk@kernel.org>
|
||||
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
|
||||
S: Odd Fixes
|
||||
F: Documentation/devicetree/bindings/*/*/ti,nspire*
|
||||
F: Documentation/devicetree/bindings/*/ti,nspire*
|
||||
F: Documentation/devicetree/bindings/arm/ti/nspire.yaml
|
||||
F: arch/arm/boot/dts/nspire/
|
||||
|
||||
ARM/TOSHIBA VISCONTI ARCHITECTURE
|
||||
M: Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp>
|
||||
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
|
||||
|
|
@ -3085,9 +3122,12 @@ W: http://www.armlinux.org.uk/
|
|||
F: arch/arm/vfp/
|
||||
|
||||
ARM/VT8500 ARM ARCHITECTURE
|
||||
M: Alexey Charkov <alchark@gmail.com>
|
||||
M: Krzysztof Kozlowski <krzk@kernel.org>
|
||||
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
|
||||
S: Orphan
|
||||
S: Odd Fixes
|
||||
F: Documentation/devicetree/bindings/i2c/i2c-wmt.txt
|
||||
F: arch/arm/boot/dts/vt8500/
|
||||
F: arch/arm/mach-vt8500/
|
||||
F: drivers/clocksource/timer-vt8500.c
|
||||
F: drivers/i2c/busses/i2c-viai2c-wmt.c
|
||||
|
|
|
|||
|
|
@ -261,68 +261,6 @@ dtb-$(CONFIG_MACH_SUN8I) += \
|
|||
sun8i-v3s-licheepi-zero.dtb \
|
||||
sun8i-v3s-licheepi-zero-dock.dtb \
|
||||
sun8i-v40-bananapi-m2-berry.dtb
|
||||
dtb-$(CONFIG_MACH_SUN8I) += \
|
||||
sun8i-a23-evb.dtb \
|
||||
sun8i-a23-gt90h-v4.dtb \
|
||||
sun8i-a23-inet86dz.dtb \
|
||||
sun8i-a23-ippo-q8h-v5.dtb \
|
||||
sun8i-a23-ippo-q8h-v1.2.dtb \
|
||||
sun8i-a23-polaroid-mid2407pxe03.dtb \
|
||||
sun8i-a23-polaroid-mid2809pxe04.dtb \
|
||||
sun8i-a23-q8-tablet.dtb \
|
||||
sun8i-a33-et-q8-v1.6.dtb \
|
||||
sun8i-a33-ga10h-v1.1.dtb \
|
||||
sun8i-a33-inet-d978-rev2.dtb \
|
||||
sun8i-a33-ippo-q8h-v1.2.dtb \
|
||||
sun8i-a33-olinuxino.dtb \
|
||||
sun8i-a33-q8-tablet.dtb \
|
||||
sun8i-a33-sinlinx-sina33.dtb \
|
||||
sun8i-a83t-allwinner-h8homlet-v2.dtb \
|
||||
sun8i-a83t-bananapi-m3.dtb \
|
||||
sun8i-a83t-cubietruck-plus.dtb \
|
||||
sun8i-a83t-tbs-a711.dtb \
|
||||
sun8i-h2-plus-bananapi-m2-zero.dtb \
|
||||
sun8i-h2-plus-libretech-all-h3-cc.dtb \
|
||||
sun8i-h2-plus-orangepi-r1.dtb \
|
||||
sun8i-h2-plus-orangepi-zero.dtb \
|
||||
sun8i-h3-bananapi-m2-plus.dtb \
|
||||
sun8i-h3-bananapi-m2-plus-v1.2.dtb \
|
||||
sun8i-h3-beelink-x2.dtb \
|
||||
sun8i-h3-libretech-all-h3-cc.dtb \
|
||||
sun8i-h3-mapleboard-mp130.dtb \
|
||||
sun8i-h3-nanopi-duo2.dtb \
|
||||
sun8i-h3-nanopi-m1.dtb\
|
||||
\
|
||||
sun8i-h3-nanopi-m1-plus.dtb \
|
||||
sun8i-h3-nanopi-neo.dtb \
|
||||
sun8i-h3-nanopi-neo-air.dtb \
|
||||
sun8i-h3-nanopi-r1.dtb \
|
||||
sun8i-h3-orangepi-2.dtb \
|
||||
sun8i-h3-orangepi-lite.dtb \
|
||||
sun8i-h3-orangepi-one.dtb \
|
||||
sun8i-h3-orangepi-pc.dtb \
|
||||
sun8i-h3-orangepi-pc-plus.dtb \
|
||||
sun8i-h3-orangepi-plus.dtb \
|
||||
sun8i-h3-orangepi-plus2e.dtb \
|
||||
sun8i-h3-orangepi-zero-plus2.dtb \
|
||||
sun8i-h3-rervision-dvk.dtb \
|
||||
sun8i-h3-zeropi.dtb \
|
||||
sun8i-h3-emlid-neutis-n5h3-devboard.dtb \
|
||||
sun8i-r16-bananapi-m2m.dtb \
|
||||
sun8i-r16-nintendo-nes-classic.dtb \
|
||||
sun8i-r16-nintendo-super-nes-classic.dtb \
|
||||
sun8i-r16-parrot.dtb \
|
||||
sun8i-r40-bananapi-m2-ultra.dtb \
|
||||
sun8i-r40-oka40i-c.dtb \
|
||||
sun8i-s3-elimo-initium.dtb \
|
||||
sun8i-s3-lichee-zero-plus.dtb \
|
||||
sun8i-s3-pinecube.dtb \
|
||||
sun8i-t113s-mangopi-mq-r-t113.dtb \
|
||||
sun8i-t3-cqa3t-bv3.dtb \
|
||||
sun8i-v3-sl631-imx179.dtb \
|
||||
sun8i-v3s-licheepi-zero.dtb \
|
||||
sun8i-v3s-licheepi-zero-dock.dtb \
|
||||
sun8i-v40-bananapi-m2-berry.dtb
|
||||
dtb-$(CONFIG_MACH_SUN9I) += \
|
||||
sun9i-a80-optimus.dtb \
|
||||
sun9i-a80-cubieboard4.dtb
|
||||
|
|
|
|||
|
|
@ -22,7 +22,7 @@
|
|||
|
||||
/ {
|
||||
/* Introduce a fixed regulator for the new ethernet controller */
|
||||
veth: fixedregulator@0 {
|
||||
veth: regulator-veth {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "veth";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
|
|
|
|||
|
|
@ -45,7 +45,7 @@ memory {
|
|||
};
|
||||
|
||||
/* The voltage to the MMC card is hardwired at 3.3V */
|
||||
vmmc: fixedregulator@0 {
|
||||
vmmc: regulator-vmmc {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vmmc";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
|
|
@ -53,13 +53,13 @@ vmmc: fixedregulator@0 {
|
|||
regulator-boot-on;
|
||||
};
|
||||
|
||||
xtal24mhz: xtal24mhz@24M {
|
||||
xtal24mhz: mclk: kmiclk: sspclk: uartclk: wdogclk: clock-24000000 {
|
||||
#clock-cells = <0>;
|
||||
compatible = "fixed-clock";
|
||||
clock-frequency = <24000000>;
|
||||
};
|
||||
|
||||
timclk: timclk@1M {
|
||||
timclk: clock-1000000 {
|
||||
#clock-cells = <0>;
|
||||
compatible = "fixed-factor-clock";
|
||||
clock-div = <24>;
|
||||
|
|
@ -67,48 +67,8 @@ timclk: timclk@1M {
|
|||
clocks = <&xtal24mhz>;
|
||||
};
|
||||
|
||||
mclk: mclk@24M {
|
||||
#clock-cells = <0>;
|
||||
compatible = "fixed-factor-clock";
|
||||
clock-div = <1>;
|
||||
clock-mult = <1>;
|
||||
clocks = <&xtal24mhz>;
|
||||
};
|
||||
|
||||
kmiclk: kmiclk@24M {
|
||||
#clock-cells = <0>;
|
||||
compatible = "fixed-factor-clock";
|
||||
clock-div = <1>;
|
||||
clock-mult = <1>;
|
||||
clocks = <&xtal24mhz>;
|
||||
};
|
||||
|
||||
sspclk: sspclk@24M {
|
||||
#clock-cells = <0>;
|
||||
compatible = "fixed-factor-clock";
|
||||
clock-div = <1>;
|
||||
clock-mult = <1>;
|
||||
clocks = <&xtal24mhz>;
|
||||
};
|
||||
|
||||
uartclk: uartclk@24M {
|
||||
#clock-cells = <0>;
|
||||
compatible = "fixed-factor-clock";
|
||||
clock-div = <1>;
|
||||
clock-mult = <1>;
|
||||
clocks = <&xtal24mhz>;
|
||||
};
|
||||
|
||||
wdogclk: wdogclk@24M {
|
||||
#clock-cells = <0>;
|
||||
compatible = "fixed-factor-clock";
|
||||
clock-div = <1>;
|
||||
clock-mult = <1>;
|
||||
clocks = <&xtal24mhz>;
|
||||
};
|
||||
|
||||
/* FIXME: this actually hangs off the PLL clocks */
|
||||
pclk: pclk@0 {
|
||||
pclk: clock-pclk {
|
||||
#clock-cells = <0>;
|
||||
compatible = "fixed-clock";
|
||||
clock-frequency = <0>;
|
||||
|
|
|
|||
|
|
@ -63,13 +63,13 @@ veth: regulator-veth {
|
|||
regulator-boot-on;
|
||||
};
|
||||
|
||||
xtal24mhz: xtal24mhz@24M {
|
||||
xtal24mhz: mclk: kmiclk: sspclk: uartclk: clock-24000000 {
|
||||
#clock-cells = <0>;
|
||||
compatible = "fixed-clock";
|
||||
clock-frequency = <24000000>;
|
||||
};
|
||||
|
||||
timclk: timclk@1M {
|
||||
timclk: clock-1000000 {
|
||||
#clock-cells = <0>;
|
||||
compatible = "fixed-factor-clock";
|
||||
clock-div = <24>;
|
||||
|
|
@ -77,40 +77,8 @@ timclk: timclk@1M {
|
|||
clocks = <&xtal24mhz>;
|
||||
};
|
||||
|
||||
mclk: mclk@24M {
|
||||
#clock-cells = <0>;
|
||||
compatible = "fixed-factor-clock";
|
||||
clock-div = <1>;
|
||||
clock-mult = <1>;
|
||||
clocks = <&xtal24mhz>;
|
||||
};
|
||||
|
||||
kmiclk: kmiclk@24M {
|
||||
#clock-cells = <0>;
|
||||
compatible = "fixed-factor-clock";
|
||||
clock-div = <1>;
|
||||
clock-mult = <1>;
|
||||
clocks = <&xtal24mhz>;
|
||||
};
|
||||
|
||||
sspclk: sspclk@24M {
|
||||
#clock-cells = <0>;
|
||||
compatible = "fixed-factor-clock";
|
||||
clock-div = <1>;
|
||||
clock-mult = <1>;
|
||||
clocks = <&xtal24mhz>;
|
||||
};
|
||||
|
||||
uartclk: uartclk@24M {
|
||||
#clock-cells = <0>;
|
||||
compatible = "fixed-factor-clock";
|
||||
clock-div = <1>;
|
||||
clock-mult = <1>;
|
||||
clocks = <&xtal24mhz>;
|
||||
};
|
||||
|
||||
/* FIXME: this actually hangs off the PLL clocks */
|
||||
pclk: pclk@0 {
|
||||
pclk: clock-pclk {
|
||||
#clock-cells = <0>;
|
||||
compatible = "fixed-clock";
|
||||
clock-frequency = <0>;
|
||||
|
|
|
|||
|
|
@ -163,19 +163,19 @@ veth: regulator-veth {
|
|||
regulator-boot-on;
|
||||
};
|
||||
|
||||
xtal24mhz: xtal24mhz@24M {
|
||||
xtal24mhz: mclk: kmiclk: sspclk: uartclk: wdogclk: clock-24000000 {
|
||||
#clock-cells = <0>;
|
||||
compatible = "fixed-clock";
|
||||
clock-frequency = <24000000>;
|
||||
};
|
||||
|
||||
refclk32khz: refclk32khz {
|
||||
refclk32khz: clock-32768 {
|
||||
compatible = "fixed-clock";
|
||||
#clock-cells = <0>;
|
||||
clock-frequency = <32768>;
|
||||
};
|
||||
|
||||
timclk: timclk@1M {
|
||||
timclk: clock-1000000 {
|
||||
#clock-cells = <0>;
|
||||
compatible = "fixed-factor-clock";
|
||||
clock-div = <24>;
|
||||
|
|
@ -183,48 +183,8 @@ timclk: timclk@1M {
|
|||
clocks = <&xtal24mhz>;
|
||||
};
|
||||
|
||||
mclk: mclk@24M {
|
||||
#clock-cells = <0>;
|
||||
compatible = "fixed-factor-clock";
|
||||
clock-div = <1>;
|
||||
clock-mult = <1>;
|
||||
clocks = <&xtal24mhz>;
|
||||
};
|
||||
|
||||
kmiclk: kmiclk@24M {
|
||||
#clock-cells = <0>;
|
||||
compatible = "fixed-factor-clock";
|
||||
clock-div = <1>;
|
||||
clock-mult = <1>;
|
||||
clocks = <&xtal24mhz>;
|
||||
};
|
||||
|
||||
sspclk: sspclk@24M {
|
||||
#clock-cells = <0>;
|
||||
compatible = "fixed-factor-clock";
|
||||
clock-div = <1>;
|
||||
clock-mult = <1>;
|
||||
clocks = <&xtal24mhz>;
|
||||
};
|
||||
|
||||
uartclk: uartclk@24M {
|
||||
#clock-cells = <0>;
|
||||
compatible = "fixed-factor-clock";
|
||||
clock-div = <1>;
|
||||
clock-mult = <1>;
|
||||
clocks = <&xtal24mhz>;
|
||||
};
|
||||
|
||||
wdogclk: wdogclk@24M {
|
||||
#clock-cells = <0>;
|
||||
compatible = "fixed-factor-clock";
|
||||
clock-div = <1>;
|
||||
clock-mult = <1>;
|
||||
clocks = <&xtal24mhz>;
|
||||
};
|
||||
|
||||
/* FIXME: this actually hangs off the PLL clocks */
|
||||
pclk: pclk@0 {
|
||||
pclk: clock-pclk {
|
||||
#clock-cells = <0>;
|
||||
compatible = "fixed-clock";
|
||||
clock-frequency = <0>;
|
||||
|
|
|
|||
|
|
@ -62,19 +62,19 @@ veth: regulator-veth {
|
|||
regulator-boot-on;
|
||||
};
|
||||
|
||||
xtal24mhz: xtal24mhz@24M {
|
||||
xtal24mhz: mclk: kmiclk: sspclk: uartclk: wdogclk: clock-24000000 {
|
||||
#clock-cells = <0>;
|
||||
compatible = "fixed-clock";
|
||||
clock-frequency = <24000000>;
|
||||
};
|
||||
|
||||
refclk32khz: refclk32khz {
|
||||
refclk32khz: clock-32768 {
|
||||
#clock-cells = <0>;
|
||||
compatible = "fixed-clock";
|
||||
clock-frequency = <32768>;
|
||||
};
|
||||
|
||||
timclk: timclk@1M {
|
||||
timclk: clock-1000000 {
|
||||
#clock-cells = <0>;
|
||||
compatible = "fixed-factor-clock";
|
||||
clock-div = <24>;
|
||||
|
|
@ -82,48 +82,8 @@ timclk: timclk@1M {
|
|||
clocks = <&xtal24mhz>;
|
||||
};
|
||||
|
||||
mclk: mclk@24M {
|
||||
#clock-cells = <0>;
|
||||
compatible = "fixed-factor-clock";
|
||||
clock-div = <1>;
|
||||
clock-mult = <1>;
|
||||
clocks = <&xtal24mhz>;
|
||||
};
|
||||
|
||||
kmiclk: kmiclk@24M {
|
||||
#clock-cells = <0>;
|
||||
compatible = "fixed-factor-clock";
|
||||
clock-div = <1>;
|
||||
clock-mult = <1>;
|
||||
clocks = <&xtal24mhz>;
|
||||
};
|
||||
|
||||
sspclk: sspclk@24M {
|
||||
#clock-cells = <0>;
|
||||
compatible = "fixed-factor-clock";
|
||||
clock-div = <1>;
|
||||
clock-mult = <1>;
|
||||
clocks = <&xtal24mhz>;
|
||||
};
|
||||
|
||||
uartclk: uartclk@24M {
|
||||
#clock-cells = <0>;
|
||||
compatible = "fixed-factor-clock";
|
||||
clock-div = <1>;
|
||||
clock-mult = <1>;
|
||||
clocks = <&xtal24mhz>;
|
||||
};
|
||||
|
||||
wdogclk: wdogclk@24M {
|
||||
#clock-cells = <0>;
|
||||
compatible = "fixed-factor-clock";
|
||||
clock-div = <1>;
|
||||
clock-mult = <1>;
|
||||
clocks = <&xtal24mhz>;
|
||||
};
|
||||
|
||||
/* FIXME: this actually hangs off the PLL clocks */
|
||||
pclk: pclk@0 {
|
||||
pclk: clock-pclk {
|
||||
#clock-cells = <0>;
|
||||
compatible = "fixed-clock";
|
||||
clock-frequency = <0>;
|
||||
|
|
|
|||
|
|
@ -54,7 +54,7 @@ vco2: clock-controller@4 {
|
|||
};
|
||||
|
||||
/* Also used for the Smart Card Interface SCI */
|
||||
impd1_uartclk: clock@1_4 {
|
||||
impd1_uartclk: clock-uart {
|
||||
compatible = "fixed-factor-clock";
|
||||
#clock-cells = <0>;
|
||||
clock-div = <4>;
|
||||
|
|
@ -64,7 +64,7 @@ impd1_uartclk: clock@1_4 {
|
|||
};
|
||||
|
||||
/* For the SSP the clock is divided by 64 */
|
||||
impd1_sspclk: clock@1_64 {
|
||||
impd1_sspclk: clock-ssp {
|
||||
compatible = "fixed-factor-clock";
|
||||
#clock-cells = <0>;
|
||||
clock-div = <64>;
|
||||
|
|
|
|||
|
|
@ -57,22 +57,14 @@ chosen {
|
|||
};
|
||||
|
||||
/* 24 MHz chrystal on the Integrator/AP development board */
|
||||
xtal24mhz: xtal24mhz@24M {
|
||||
xtal24mhz: pclk: clock-24000000 {
|
||||
#clock-cells = <0>;
|
||||
compatible = "fixed-clock";
|
||||
clock-frequency = <24000000>;
|
||||
};
|
||||
|
||||
pclk: pclk@0 {
|
||||
#clock-cells = <0>;
|
||||
compatible = "fixed-factor-clock";
|
||||
clock-div = <1>;
|
||||
clock-mult = <1>;
|
||||
clocks = <&xtal24mhz>;
|
||||
};
|
||||
|
||||
/* The UART clock is 14.74 MHz divided by an ICS525 */
|
||||
uartclk: uartclk@14.74M {
|
||||
uartclk: clock-14745600 {
|
||||
#clock-cells = <0>;
|
||||
compatible = "fixed-clock";
|
||||
clock-frequency = <14745600>;
|
||||
|
|
@ -81,7 +73,7 @@ uartclk: uartclk@14.74M {
|
|||
|
||||
core-module@10000000 {
|
||||
/* 24 MHz chrystal on the core module */
|
||||
cm24mhz: cm24mhz@24M {
|
||||
cm24mhz: clock-24000000 {
|
||||
#clock-cells = <0>;
|
||||
compatible = "fixed-clock";
|
||||
clock-frequency = <24000000>;
|
||||
|
|
|
|||
|
|
@ -47,14 +47,14 @@ cpu@0 {
|
|||
*/
|
||||
|
||||
/* The codec chrystal operates at 24.576 MHz */
|
||||
xtal_codec: xtal24.576@24.576M {
|
||||
xtal_codec: clock-24576000 {
|
||||
#clock-cells = <0>;
|
||||
compatible = "fixed-clock";
|
||||
clock-frequency = <24576000>;
|
||||
};
|
||||
|
||||
/* The chrystal is divided by 2 by the codec for the AACI bit clock */
|
||||
aaci_bitclk: aaci_bitclk@12.288M {
|
||||
aaci_bitclk: clock-12288000 {
|
||||
#clock-cells = <0>;
|
||||
compatible = "fixed-factor-clock";
|
||||
clock-div = <2>;
|
||||
|
|
@ -63,21 +63,21 @@ aaci_bitclk: aaci_bitclk@12.288M {
|
|||
};
|
||||
|
||||
/* This is a 25MHz chrystal on the base board */
|
||||
xtal25mhz: xtal25mhz@25M {
|
||||
xtal25mhz: clock-25000000 {
|
||||
#clock-cells = <0>;
|
||||
compatible = "fixed-clock";
|
||||
clock-frequency = <25000000>;
|
||||
};
|
||||
|
||||
/* The UART clock is 14.74 MHz divided from 25MHz by an ICS525 */
|
||||
uartclk: uartclk@14.74M {
|
||||
uartclk: clock-14745600 {
|
||||
#clock-cells = <0>;
|
||||
compatible = "fixed-clock";
|
||||
clock-frequency = <14745600>;
|
||||
};
|
||||
|
||||
/* Actually sysclk I think */
|
||||
pclk: pclk@0 {
|
||||
pclk: clock-pclk {
|
||||
#clock-cells = <0>;
|
||||
compatible = "fixed-clock";
|
||||
clock-frequency = <0>;
|
||||
|
|
@ -85,7 +85,7 @@ pclk: pclk@0 {
|
|||
|
||||
core-module@10000000 {
|
||||
/* 24 MHz chrystal on the core module */
|
||||
cm24mhz: cm24mhz@24M {
|
||||
cm24mhz: clock-24000000 {
|
||||
#clock-cells = <0>;
|
||||
compatible = "fixed-clock";
|
||||
clock-frequency = <24000000>;
|
||||
|
|
@ -131,7 +131,7 @@ kmiclk: kmiclk@1M {
|
|||
};
|
||||
|
||||
/* The timer clock is the 24 MHz oscillator divided to 1MHz */
|
||||
timclk: timclk@1M {
|
||||
timclk: clock-1000000 {
|
||||
#clock-cells = <0>;
|
||||
compatible = "fixed-factor-clock";
|
||||
clock-div = <24>;
|
||||
|
|
|
|||
|
|
@ -48,37 +48,37 @@ / {
|
|||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
oscclk0: clk-osc0 {
|
||||
oscclk0: clock-50000000 {
|
||||
compatible = "fixed-clock";
|
||||
#clock-cells = <0>;
|
||||
clock-frequency = <50000000>;
|
||||
};
|
||||
|
||||
oscclk1: clk-osc1 {
|
||||
oscclk1: clock-24576000 {
|
||||
compatible = "fixed-clock";
|
||||
#clock-cells = <0>;
|
||||
clock-frequency = <24576000>;
|
||||
};
|
||||
|
||||
oscclk2: clk-osc2 {
|
||||
oscclk2: clock-25000000 {
|
||||
compatible = "fixed-clock";
|
||||
#clock-cells = <0>;
|
||||
clock-frequency = <25000000>;
|
||||
};
|
||||
|
||||
cfgclk: clk-cfg {
|
||||
cfgclk: clock-5000000 {
|
||||
compatible = "fixed-clock";
|
||||
#clock-cells = <0>;
|
||||
clock-frequency = <5000000>;
|
||||
};
|
||||
|
||||
spicfgclk: clk-spicfg {
|
||||
spicfgclk: clock-75000000 {
|
||||
compatible = "fixed-clock";
|
||||
#clock-cells = <0>;
|
||||
clock-frequency = <75000000>;
|
||||
};
|
||||
|
||||
sysclk: clk-sys {
|
||||
sysclk: spiclcd: spicon: i2cclcd: i2caud: clock-sys {
|
||||
compatible = "fixed-factor-clock";
|
||||
clocks = <&oscclk0>;
|
||||
#clock-cells = <0>;
|
||||
|
|
@ -86,7 +86,7 @@ sysclk: clk-sys {
|
|||
clock-mult = <1>;
|
||||
};
|
||||
|
||||
audmclk: clk-audm {
|
||||
audmclk: clk-12388000 {
|
||||
compatible = "fixed-factor-clock";
|
||||
clocks = <&oscclk1>;
|
||||
#clock-cells = <0>;
|
||||
|
|
@ -94,7 +94,7 @@ audmclk: clk-audm {
|
|||
clock-mult = <1>;
|
||||
};
|
||||
|
||||
audsclk: clk-auds {
|
||||
audsclk: clk-3072000 {
|
||||
compatible = "fixed-factor-clock";
|
||||
clocks = <&oscclk1>;
|
||||
#clock-cells = <0>;
|
||||
|
|
@ -102,38 +102,6 @@ audsclk: clk-auds {
|
|||
clock-mult = <1>;
|
||||
};
|
||||
|
||||
spiclcd: clk-cpiclcd {
|
||||
compatible = "fixed-factor-clock";
|
||||
clocks = <&oscclk0>;
|
||||
#clock-cells = <0>;
|
||||
clock-div = <2>;
|
||||
clock-mult = <1>;
|
||||
};
|
||||
|
||||
spicon: clk-spicon {
|
||||
compatible = "fixed-factor-clock";
|
||||
clocks = <&oscclk0>;
|
||||
#clock-cells = <0>;
|
||||
clock-div = <2>;
|
||||
clock-mult = <1>;
|
||||
};
|
||||
|
||||
i2cclcd: clk-i2cclcd {
|
||||
compatible = "fixed-factor-clock";
|
||||
clocks = <&oscclk0>;
|
||||
#clock-cells = <0>;
|
||||
clock-div = <2>;
|
||||
clock-mult = <1>;
|
||||
};
|
||||
|
||||
i2caud: clk-i2caud {
|
||||
compatible = "fixed-factor-clock";
|
||||
clocks = <&oscclk0>;
|
||||
#clock-cells = <0>;
|
||||
clock-div = <2>;
|
||||
clock-mult = <1>;
|
||||
};
|
||||
|
||||
soc {
|
||||
compatible = "simple-bus";
|
||||
ranges;
|
||||
|
|
|
|||
|
|
@ -24,7 +24,7 @@ memory {
|
|||
reg = <0x0 0x08000000>;
|
||||
};
|
||||
|
||||
xtal24mhz: xtal24mhz@24M {
|
||||
xtal24mhz: clock-24000000 {
|
||||
#clock-cells = <0>;
|
||||
compatible = "fixed-clock";
|
||||
clock-frequency = <24000000>;
|
||||
|
|
@ -142,14 +142,14 @@ led@8,7 {
|
|||
};
|
||||
|
||||
/* OSC1 on AB, OSC4 on PB */
|
||||
osc1: cm_aux_osc@24M {
|
||||
osc1: clock-osc {
|
||||
#clock-cells = <0>;
|
||||
compatible = "arm,versatile-cm-auxosc";
|
||||
clocks = <&xtal24mhz>;
|
||||
};
|
||||
|
||||
/* The timer clock is the 24 MHz oscillator divided to 1MHz */
|
||||
timclk: timclk@1M {
|
||||
timclk: clock-1000000 {
|
||||
#clock-cells = <0>;
|
||||
compatible = "fixed-factor-clock";
|
||||
clock-div = <24>;
|
||||
|
|
@ -157,7 +157,7 @@ timclk: timclk@1M {
|
|||
clocks = <&xtal24mhz>;
|
||||
};
|
||||
|
||||
pclk: pclk@24M {
|
||||
pclk: clock-24000000 {
|
||||
#clock-cells = <0>;
|
||||
compatible = "fixed-factor-clock";
|
||||
clock-div = <1>;
|
||||
|
|
|
|||
|
|
@ -20,7 +20,7 @@
|
|||
#include <dt-bindings/interrupt-controller/arm-gic.h>
|
||||
|
||||
/ {
|
||||
v2m_fixed_3v3: fixed-regulator-0 {
|
||||
v2m_fixed_3v3: regulator-3v3 {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "3V3";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
|
|
@ -28,21 +28,21 @@ v2m_fixed_3v3: fixed-regulator-0 {
|
|||
regulator-always-on;
|
||||
};
|
||||
|
||||
v2m_clk24mhz: clk24mhz {
|
||||
v2m_clk24mhz: clock-24000000 {
|
||||
compatible = "fixed-clock";
|
||||
#clock-cells = <0>;
|
||||
clock-frequency = <24000000>;
|
||||
clock-output-names = "v2m:clk24mhz";
|
||||
};
|
||||
|
||||
v2m_refclk1mhz: refclk1mhz {
|
||||
v2m_refclk1mhz: clock-1000000 {
|
||||
compatible = "fixed-clock";
|
||||
#clock-cells = <0>;
|
||||
clock-frequency = <1000000>;
|
||||
clock-output-names = "v2m:refclk1mhz";
|
||||
};
|
||||
|
||||
v2m_refclk32khz: refclk32khz {
|
||||
v2m_refclk32khz: clock-32768 {
|
||||
compatible = "fixed-clock";
|
||||
#clock-cells = <0>;
|
||||
clock-frequency = <32768>;
|
||||
|
|
|
|||
|
|
@ -351,7 +351,7 @@ clcd_pads_mb: endpoint {
|
|||
};
|
||||
};
|
||||
|
||||
v2m_fixed_3v3: fixed-regulator-0 {
|
||||
v2m_fixed_3v3: regulator-3v3 {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "3V3";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
|
|
@ -359,21 +359,21 @@ v2m_fixed_3v3: fixed-regulator-0 {
|
|||
regulator-always-on;
|
||||
};
|
||||
|
||||
v2m_clk24mhz: clk24mhz {
|
||||
v2m_clk24mhz: clock-24000000 {
|
||||
compatible = "fixed-clock";
|
||||
#clock-cells = <0>;
|
||||
clock-frequency = <24000000>;
|
||||
clock-output-names = "v2m:clk24mhz";
|
||||
};
|
||||
|
||||
v2m_refclk1mhz: refclk1mhz {
|
||||
v2m_refclk1mhz: clock-1000000 {
|
||||
compatible = "fixed-clock";
|
||||
#clock-cells = <0>;
|
||||
clock-frequency = <1000000>;
|
||||
clock-output-names = "v2m:refclk1mhz";
|
||||
};
|
||||
|
||||
v2m_refclk32khz: refclk32khz {
|
||||
v2m_refclk32khz: clock-32768 {
|
||||
compatible = "fixed-clock";
|
||||
#clock-cells = <0>;
|
||||
clock-frequency = <32768>;
|
||||
|
|
@ -436,7 +436,7 @@ mcc {
|
|||
compatible = "arm,vexpress,config-bus";
|
||||
arm,vexpress,config-bridge = <&v2m_sysreg>;
|
||||
|
||||
oscclk0 {
|
||||
clock-controller-0 {
|
||||
/* MCC static memory clock */
|
||||
compatible = "arm,vexpress-osc";
|
||||
arm,vexpress-sysreg,func = <1 0>;
|
||||
|
|
@ -445,7 +445,7 @@ oscclk0 {
|
|||
clock-output-names = "v2m:oscclk0";
|
||||
};
|
||||
|
||||
v2m_oscclk1: oscclk1 {
|
||||
v2m_oscclk1: clock-controller-1 {
|
||||
/* CLCD clock */
|
||||
compatible = "arm,vexpress-osc";
|
||||
arm,vexpress-sysreg,func = <1 1>;
|
||||
|
|
@ -454,7 +454,7 @@ v2m_oscclk1: oscclk1 {
|
|||
clock-output-names = "v2m:oscclk1";
|
||||
};
|
||||
|
||||
v2m_oscclk2: oscclk2 {
|
||||
v2m_oscclk2: clock-controller-2 {
|
||||
/* IO FPGA peripheral clock */
|
||||
compatible = "arm,vexpress-osc";
|
||||
arm,vexpress-sysreg,func = <1 2>;
|
||||
|
|
@ -463,7 +463,7 @@ v2m_oscclk2: oscclk2 {
|
|||
clock-output-names = "v2m:oscclk2";
|
||||
};
|
||||
|
||||
volt-vio {
|
||||
regulator-vio {
|
||||
/* Logic level voltage */
|
||||
compatible = "arm,vexpress-volt";
|
||||
arm,vexpress-sysreg,func = <2 0>;
|
||||
|
|
|
|||
|
|
@ -142,7 +142,7 @@ dcc {
|
|||
compatible = "arm,vexpress,config-bus";
|
||||
arm,vexpress,config-bridge = <&v2m_sysreg>;
|
||||
|
||||
oscclk0 {
|
||||
clock-controller-0 {
|
||||
/* CPU PLL reference clock */
|
||||
compatible = "arm,vexpress-osc";
|
||||
arm,vexpress-sysreg,func = <1 0>;
|
||||
|
|
@ -151,7 +151,7 @@ oscclk0 {
|
|||
clock-output-names = "oscclk0";
|
||||
};
|
||||
|
||||
oscclk4 {
|
||||
clock-controller-4 {
|
||||
/* Multiplexed AXI master clock */
|
||||
compatible = "arm,vexpress-osc";
|
||||
arm,vexpress-sysreg,func = <1 4>;
|
||||
|
|
@ -160,7 +160,7 @@ oscclk4 {
|
|||
clock-output-names = "oscclk4";
|
||||
};
|
||||
|
||||
hdlcd_clk: oscclk5 {
|
||||
hdlcd_clk: clock-controller-5 {
|
||||
/* HDLCD PLL reference clock */
|
||||
compatible = "arm,vexpress-osc";
|
||||
arm,vexpress-sysreg,func = <1 5>;
|
||||
|
|
@ -169,7 +169,7 @@ hdlcd_clk: oscclk5 {
|
|||
clock-output-names = "oscclk5";
|
||||
};
|
||||
|
||||
smbclk: oscclk6 {
|
||||
smbclk: clock-controller-6 {
|
||||
/* SMB clock */
|
||||
compatible = "arm,vexpress-osc";
|
||||
arm,vexpress-sysreg,func = <1 6>;
|
||||
|
|
@ -178,7 +178,7 @@ smbclk: oscclk6 {
|
|||
clock-output-names = "oscclk6";
|
||||
};
|
||||
|
||||
sys_pll: oscclk7 {
|
||||
sys_pll: clock-controller-7 {
|
||||
/* SYS PLL reference clock */
|
||||
compatible = "arm,vexpress-osc";
|
||||
arm,vexpress-sysreg,func = <1 7>;
|
||||
|
|
@ -187,7 +187,7 @@ sys_pll: oscclk7 {
|
|||
clock-output-names = "oscclk7";
|
||||
};
|
||||
|
||||
oscclk8 {
|
||||
clock-controller-8 {
|
||||
/* DDR2 PLL reference clock */
|
||||
compatible = "arm,vexpress-osc";
|
||||
arm,vexpress-sysreg,func = <1 8>;
|
||||
|
|
@ -196,7 +196,7 @@ oscclk8 {
|
|||
clock-output-names = "oscclk8";
|
||||
};
|
||||
|
||||
volt-cores {
|
||||
regulator-cores {
|
||||
/* CPU core voltage */
|
||||
compatible = "arm,vexpress-volt";
|
||||
arm,vexpress-sysreg,func = <2 0>;
|
||||
|
|
|
|||
|
|
@ -253,7 +253,7 @@ dcc {
|
|||
compatible = "arm,vexpress,config-bus";
|
||||
arm,vexpress,config-bridge = <&v2m_sysreg>;
|
||||
|
||||
oscclk0 {
|
||||
clock-controller-0 {
|
||||
/* A15 PLL 0 reference clock */
|
||||
compatible = "arm,vexpress-osc";
|
||||
arm,vexpress-sysreg,func = <1 0>;
|
||||
|
|
@ -262,7 +262,7 @@ oscclk0 {
|
|||
clock-output-names = "oscclk0";
|
||||
};
|
||||
|
||||
oscclk1 {
|
||||
clock-controller-1 {
|
||||
/* A15 PLL 1 reference clock */
|
||||
compatible = "arm,vexpress-osc";
|
||||
arm,vexpress-sysreg,func = <1 1>;
|
||||
|
|
@ -271,7 +271,7 @@ oscclk1 {
|
|||
clock-output-names = "oscclk1";
|
||||
};
|
||||
|
||||
oscclk2 {
|
||||
clock-controller-2 {
|
||||
/* A7 PLL 0 reference clock */
|
||||
compatible = "arm,vexpress-osc";
|
||||
arm,vexpress-sysreg,func = <1 2>;
|
||||
|
|
@ -280,7 +280,7 @@ oscclk2 {
|
|||
clock-output-names = "oscclk2";
|
||||
};
|
||||
|
||||
oscclk3 {
|
||||
clock-controller-3 {
|
||||
/* A7 PLL 1 reference clock */
|
||||
compatible = "arm,vexpress-osc";
|
||||
arm,vexpress-sysreg,func = <1 3>;
|
||||
|
|
@ -289,7 +289,7 @@ oscclk3 {
|
|||
clock-output-names = "oscclk3";
|
||||
};
|
||||
|
||||
oscclk4 {
|
||||
clock-controller-4 {
|
||||
/* External AXI master clock */
|
||||
compatible = "arm,vexpress-osc";
|
||||
arm,vexpress-sysreg,func = <1 4>;
|
||||
|
|
@ -298,7 +298,7 @@ oscclk4 {
|
|||
clock-output-names = "oscclk4";
|
||||
};
|
||||
|
||||
hdlcd_clk: oscclk5 {
|
||||
hdlcd_clk: clock-controller-5 {
|
||||
/* HDLCD PLL reference clock */
|
||||
compatible = "arm,vexpress-osc";
|
||||
arm,vexpress-sysreg,func = <1 5>;
|
||||
|
|
@ -307,7 +307,7 @@ hdlcd_clk: oscclk5 {
|
|||
clock-output-names = "oscclk5";
|
||||
};
|
||||
|
||||
smbclk: oscclk6 {
|
||||
smbclk: clock-controller-6 {
|
||||
/* Static memory controller clock */
|
||||
compatible = "arm,vexpress-osc";
|
||||
arm,vexpress-sysreg,func = <1 6>;
|
||||
|
|
@ -316,7 +316,7 @@ smbclk: oscclk6 {
|
|||
clock-output-names = "oscclk6";
|
||||
};
|
||||
|
||||
oscclk7 {
|
||||
clock-controller-7 {
|
||||
/* SYS PLL reference clock */
|
||||
compatible = "arm,vexpress-osc";
|
||||
arm,vexpress-sysreg,func = <1 7>;
|
||||
|
|
@ -325,7 +325,7 @@ oscclk7 {
|
|||
clock-output-names = "oscclk7";
|
||||
};
|
||||
|
||||
oscclk8 {
|
||||
clock-controller-8 {
|
||||
/* DDR2 PLL reference clock */
|
||||
compatible = "arm,vexpress-osc";
|
||||
arm,vexpress-sysreg,func = <1 8>;
|
||||
|
|
@ -334,7 +334,7 @@ oscclk8 {
|
|||
clock-output-names = "oscclk8";
|
||||
};
|
||||
|
||||
volt-a15 {
|
||||
regulator-a15 {
|
||||
/* A15 CPU core voltage */
|
||||
compatible = "arm,vexpress-volt";
|
||||
arm,vexpress-sysreg,func = <2 0>;
|
||||
|
|
@ -345,7 +345,7 @@ volt-a15 {
|
|||
label = "A15 Vcore";
|
||||
};
|
||||
|
||||
volt-a7 {
|
||||
regulator-a7 {
|
||||
/* A7 CPU core voltage */
|
||||
compatible = "arm,vexpress-volt";
|
||||
arm,vexpress-sysreg,func = <2 1>;
|
||||
|
|
|
|||
|
|
@ -145,7 +145,7 @@ dcc {
|
|||
compatible = "arm,vexpress,config-bus";
|
||||
arm,vexpress,config-bridge = <&v2m_sysreg>;
|
||||
|
||||
cpu_clk: oscclk0 {
|
||||
cpu_clk: clock-controller-0 {
|
||||
/* CPU and internal AXI reference clock */
|
||||
compatible = "arm,vexpress-osc";
|
||||
arm,vexpress-sysreg,func = <1 0>;
|
||||
|
|
@ -154,7 +154,7 @@ cpu_clk: oscclk0 {
|
|||
clock-output-names = "oscclk0";
|
||||
};
|
||||
|
||||
axi_clk: oscclk1 {
|
||||
axi_clk: clock-controller-1 {
|
||||
/* Multiplexed AXI master clock */
|
||||
compatible = "arm,vexpress-osc";
|
||||
arm,vexpress-sysreg,func = <1 1>;
|
||||
|
|
@ -163,7 +163,7 @@ axi_clk: oscclk1 {
|
|||
clock-output-names = "oscclk1";
|
||||
};
|
||||
|
||||
oscclk2 {
|
||||
clock-controller-2 {
|
||||
/* DDR2 */
|
||||
compatible = "arm,vexpress-osc";
|
||||
arm,vexpress-sysreg,func = <1 2>;
|
||||
|
|
@ -172,7 +172,7 @@ oscclk2 {
|
|||
clock-output-names = "oscclk2";
|
||||
};
|
||||
|
||||
hdlcd_clk: oscclk3 {
|
||||
hdlcd_clk: clock-controller-3 {
|
||||
/* HDLCD */
|
||||
compatible = "arm,vexpress-osc";
|
||||
arm,vexpress-sysreg,func = <1 3>;
|
||||
|
|
@ -181,7 +181,7 @@ hdlcd_clk: oscclk3 {
|
|||
clock-output-names = "oscclk3";
|
||||
};
|
||||
|
||||
oscclk4 {
|
||||
clock-controller-4 {
|
||||
/* Test chip gate configuration */
|
||||
compatible = "arm,vexpress-osc";
|
||||
arm,vexpress-sysreg,func = <1 4>;
|
||||
|
|
@ -190,7 +190,7 @@ oscclk4 {
|
|||
clock-output-names = "oscclk4";
|
||||
};
|
||||
|
||||
smbclk: oscclk5 {
|
||||
smbclk: clock-controller-5 {
|
||||
/* SMB clock */
|
||||
compatible = "arm,vexpress-osc";
|
||||
arm,vexpress-sysreg,func = <1 5>;
|
||||
|
|
|
|||
|
|
@ -187,7 +187,7 @@ dcc {
|
|||
compatible = "arm,vexpress,config-bus";
|
||||
arm,vexpress,config-bridge = <&v2m_sysreg>;
|
||||
|
||||
oscclk0: extsaxiclk {
|
||||
oscclk0: clock-controller-0 {
|
||||
/* ACLK clock to the AXI master port on the test chip */
|
||||
compatible = "arm,vexpress-osc";
|
||||
arm,vexpress-sysreg,func = <1 0>;
|
||||
|
|
@ -196,7 +196,7 @@ oscclk0: extsaxiclk {
|
|||
clock-output-names = "extsaxiclk";
|
||||
};
|
||||
|
||||
oscclk1: clcdclk {
|
||||
oscclk1: clock-controller-1 {
|
||||
/* Reference clock for the CLCD */
|
||||
compatible = "arm,vexpress-osc";
|
||||
arm,vexpress-sysreg,func = <1 1>;
|
||||
|
|
@ -205,7 +205,7 @@ oscclk1: clcdclk {
|
|||
clock-output-names = "clcdclk";
|
||||
};
|
||||
|
||||
smbclk: oscclk2: tcrefclk {
|
||||
smbclk: oscclk2: clock-controller-2 {
|
||||
/* Reference clock for the test chip internal PLLs */
|
||||
compatible = "arm,vexpress-osc";
|
||||
arm,vexpress-sysreg,func = <1 2>;
|
||||
|
|
@ -214,7 +214,7 @@ smbclk: oscclk2: tcrefclk {
|
|||
clock-output-names = "tcrefclk";
|
||||
};
|
||||
|
||||
volt-vd10 {
|
||||
regulator-vd10 {
|
||||
/* Test Chip internal logic voltage */
|
||||
compatible = "arm,vexpress-volt";
|
||||
arm,vexpress-sysreg,func = <2 0>;
|
||||
|
|
@ -223,7 +223,7 @@ volt-vd10 {
|
|||
label = "VD10";
|
||||
};
|
||||
|
||||
volt-vd10-s2 {
|
||||
regulator-vd10-s2 {
|
||||
/* PL310, L2 cache, RAM cell supply (not PL310 logic) */
|
||||
compatible = "arm,vexpress-volt";
|
||||
arm,vexpress-sysreg,func = <2 1>;
|
||||
|
|
@ -232,7 +232,7 @@ volt-vd10-s2 {
|
|||
label = "VD10_S2";
|
||||
};
|
||||
|
||||
volt-vd10-s3 {
|
||||
regulator-vd10-s3 {
|
||||
/* Cortex-A9 system supply, Cores, MPEs, SCU and PL310 logic */
|
||||
compatible = "arm,vexpress-volt";
|
||||
arm,vexpress-sysreg,func = <2 2>;
|
||||
|
|
@ -241,7 +241,7 @@ volt-vd10-s3 {
|
|||
label = "VD10_S3";
|
||||
};
|
||||
|
||||
volt-vcc1v8 {
|
||||
regulator-vcc1v8 {
|
||||
/* DDR2 SDRAM and Test Chip DDR2 I/O supply */
|
||||
compatible = "arm,vexpress-volt";
|
||||
arm,vexpress-sysreg,func = <2 3>;
|
||||
|
|
@ -250,7 +250,7 @@ volt-vcc1v8 {
|
|||
label = "VCC1V8";
|
||||
};
|
||||
|
||||
volt-ddr2vtt {
|
||||
regulator-ddr2vtt {
|
||||
/* DDR2 SDRAM VTT termination voltage */
|
||||
compatible = "arm,vexpress-volt";
|
||||
arm,vexpress-sysreg,func = <2 4>;
|
||||
|
|
@ -259,7 +259,7 @@ volt-ddr2vtt {
|
|||
label = "DDR2VTT";
|
||||
};
|
||||
|
||||
volt-vcc3v3 {
|
||||
regulator-vcc3v3 {
|
||||
/* Local board supply for miscellaneous logic external to the Test Chip */
|
||||
arm,vexpress-sysreg,func = <2 5>;
|
||||
compatible = "arm,vexpress-volt";
|
||||
|
|
|
|||
|
|
@ -463,7 +463,7 @@ i2c_ic: interrupt-controller@0 {
|
|||
interrupt-controller;
|
||||
};
|
||||
|
||||
i2c0: i2c-bus@40 {
|
||||
i2c0: i2c@40 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
|
|
@ -478,7 +478,7 @@ i2c0: i2c-bus@40 {
|
|||
/* Does not need pinctrl properties */
|
||||
};
|
||||
|
||||
i2c1: i2c-bus@80 {
|
||||
i2c1: i2c@80 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
|
|
@ -493,7 +493,7 @@ i2c1: i2c-bus@80 {
|
|||
/* Does not need pinctrl properties */
|
||||
};
|
||||
|
||||
i2c2: i2c-bus@c0 {
|
||||
i2c2: i2c@c0 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
|
|
@ -509,7 +509,7 @@ i2c2: i2c-bus@c0 {
|
|||
status = "disabled";
|
||||
};
|
||||
|
||||
i2c3: i2c-bus@100 {
|
||||
i2c3: i2c@100 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
|
|
@ -525,7 +525,7 @@ i2c3: i2c-bus@100 {
|
|||
status = "disabled";
|
||||
};
|
||||
|
||||
i2c4: i2c-bus@140 {
|
||||
i2c4: i2c@140 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
|
|
@ -541,7 +541,7 @@ i2c4: i2c-bus@140 {
|
|||
status = "disabled";
|
||||
};
|
||||
|
||||
i2c5: i2c-bus@180 {
|
||||
i2c5: i2c@180 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
|
|
@ -557,7 +557,7 @@ i2c5: i2c-bus@180 {
|
|||
status = "disabled";
|
||||
};
|
||||
|
||||
i2c6: i2c-bus@1c0 {
|
||||
i2c6: i2c@1c0 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
|
|
@ -573,7 +573,7 @@ i2c6: i2c-bus@1c0 {
|
|||
status = "disabled";
|
||||
};
|
||||
|
||||
i2c7: i2c-bus@300 {
|
||||
i2c7: i2c@300 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
|
|
@ -589,7 +589,7 @@ i2c7: i2c-bus@300 {
|
|||
status = "disabled";
|
||||
};
|
||||
|
||||
i2c8: i2c-bus@340 {
|
||||
i2c8: i2c@340 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
|
|
@ -605,7 +605,7 @@ i2c8: i2c-bus@340 {
|
|||
status = "disabled";
|
||||
};
|
||||
|
||||
i2c9: i2c-bus@380 {
|
||||
i2c9: i2c@380 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
|
|
@ -621,7 +621,7 @@ i2c9: i2c-bus@380 {
|
|||
status = "disabled";
|
||||
};
|
||||
|
||||
i2c10: i2c-bus@3c0 {
|
||||
i2c10: i2c@3c0 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
|
|
@ -637,7 +637,7 @@ i2c10: i2c-bus@3c0 {
|
|||
status = "disabled";
|
||||
};
|
||||
|
||||
i2c11: i2c-bus@400 {
|
||||
i2c11: i2c@400 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
|
|
@ -653,7 +653,7 @@ i2c11: i2c-bus@400 {
|
|||
status = "disabled";
|
||||
};
|
||||
|
||||
i2c12: i2c-bus@440 {
|
||||
i2c12: i2c@440 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
|
|
@ -669,7 +669,7 @@ i2c12: i2c-bus@440 {
|
|||
status = "disabled";
|
||||
};
|
||||
|
||||
i2c13: i2c-bus@480 {
|
||||
i2c13: i2c@480 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
|
|
|
|||
|
|
@ -592,7 +592,7 @@ i2c_ic: interrupt-controller@0 {
|
|||
interrupt-controller;
|
||||
};
|
||||
|
||||
i2c0: i2c-bus@40 {
|
||||
i2c0: i2c@40 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
|
|
@ -607,7 +607,7 @@ i2c0: i2c-bus@40 {
|
|||
/* Does not need pinctrl properties */
|
||||
};
|
||||
|
||||
i2c1: i2c-bus@80 {
|
||||
i2c1: i2c@80 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
|
|
@ -622,7 +622,7 @@ i2c1: i2c-bus@80 {
|
|||
/* Does not need pinctrl properties */
|
||||
};
|
||||
|
||||
i2c2: i2c-bus@c0 {
|
||||
i2c2: i2c@c0 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
|
|
@ -638,7 +638,7 @@ i2c2: i2c-bus@c0 {
|
|||
status = "disabled";
|
||||
};
|
||||
|
||||
i2c3: i2c-bus@100 {
|
||||
i2c3: i2c@100 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
|
|
@ -654,7 +654,7 @@ i2c3: i2c-bus@100 {
|
|||
status = "disabled";
|
||||
};
|
||||
|
||||
i2c4: i2c-bus@140 {
|
||||
i2c4: i2c@140 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
|
|
@ -670,7 +670,7 @@ i2c4: i2c-bus@140 {
|
|||
status = "disabled";
|
||||
};
|
||||
|
||||
i2c5: i2c-bus@180 {
|
||||
i2c5: i2c@180 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
|
|
@ -686,7 +686,7 @@ i2c5: i2c-bus@180 {
|
|||
status = "disabled";
|
||||
};
|
||||
|
||||
i2c6: i2c-bus@1c0 {
|
||||
i2c6: i2c@1c0 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
|
|
@ -702,7 +702,7 @@ i2c6: i2c-bus@1c0 {
|
|||
status = "disabled";
|
||||
};
|
||||
|
||||
i2c7: i2c-bus@300 {
|
||||
i2c7: i2c@300 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
|
|
@ -718,7 +718,7 @@ i2c7: i2c-bus@300 {
|
|||
status = "disabled";
|
||||
};
|
||||
|
||||
i2c8: i2c-bus@340 {
|
||||
i2c8: i2c@340 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
|
|
@ -734,7 +734,7 @@ i2c8: i2c-bus@340 {
|
|||
status = "disabled";
|
||||
};
|
||||
|
||||
i2c9: i2c-bus@380 {
|
||||
i2c9: i2c@380 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
|
|
@ -750,7 +750,7 @@ i2c9: i2c-bus@380 {
|
|||
status = "disabled";
|
||||
};
|
||||
|
||||
i2c10: i2c-bus@3c0 {
|
||||
i2c10: i2c@3c0 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
|
|
@ -766,7 +766,7 @@ i2c10: i2c-bus@3c0 {
|
|||
status = "disabled";
|
||||
};
|
||||
|
||||
i2c11: i2c-bus@400 {
|
||||
i2c11: i2c@400 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
|
|
@ -782,7 +782,7 @@ i2c11: i2c-bus@400 {
|
|||
status = "disabled";
|
||||
};
|
||||
|
||||
i2c12: i2c-bus@440 {
|
||||
i2c12: i2c@440 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
|
|
@ -798,7 +798,7 @@ i2c12: i2c-bus@440 {
|
|||
status = "disabled";
|
||||
};
|
||||
|
||||
i2c13: i2c-bus@480 {
|
||||
i2c13: i2c@480 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
|
|
|
|||
|
|
@ -905,7 +905,7 @@ udma: dma-controller@1e79e000 {
|
|||
#include "aspeed-g6-pinctrl.dtsi"
|
||||
|
||||
&i2c {
|
||||
i2c0: i2c-bus@80 {
|
||||
i2c0: i2c@80 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <0x80 0x80>;
|
||||
|
|
@ -919,7 +919,7 @@ i2c0: i2c-bus@80 {
|
|||
status = "disabled";
|
||||
};
|
||||
|
||||
i2c1: i2c-bus@100 {
|
||||
i2c1: i2c@100 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <0x100 0x80>;
|
||||
|
|
@ -933,7 +933,7 @@ i2c1: i2c-bus@100 {
|
|||
status = "disabled";
|
||||
};
|
||||
|
||||
i2c2: i2c-bus@180 {
|
||||
i2c2: i2c@180 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <0x180 0x80>;
|
||||
|
|
@ -947,7 +947,7 @@ i2c2: i2c-bus@180 {
|
|||
status = "disabled";
|
||||
};
|
||||
|
||||
i2c3: i2c-bus@200 {
|
||||
i2c3: i2c@200 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <0x200 0x80>;
|
||||
|
|
@ -961,7 +961,7 @@ i2c3: i2c-bus@200 {
|
|||
status = "disabled";
|
||||
};
|
||||
|
||||
i2c4: i2c-bus@280 {
|
||||
i2c4: i2c@280 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <0x280 0x80>;
|
||||
|
|
@ -975,7 +975,7 @@ i2c4: i2c-bus@280 {
|
|||
status = "disabled";
|
||||
};
|
||||
|
||||
i2c5: i2c-bus@300 {
|
||||
i2c5: i2c@300 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <0x300 0x80>;
|
||||
|
|
@ -989,7 +989,7 @@ i2c5: i2c-bus@300 {
|
|||
status = "disabled";
|
||||
};
|
||||
|
||||
i2c6: i2c-bus@380 {
|
||||
i2c6: i2c@380 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <0x380 0x80>;
|
||||
|
|
@ -1003,7 +1003,7 @@ i2c6: i2c-bus@380 {
|
|||
status = "disabled";
|
||||
};
|
||||
|
||||
i2c7: i2c-bus@400 {
|
||||
i2c7: i2c@400 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <0x400 0x80>;
|
||||
|
|
@ -1017,7 +1017,7 @@ i2c7: i2c-bus@400 {
|
|||
status = "disabled";
|
||||
};
|
||||
|
||||
i2c8: i2c-bus@480 {
|
||||
i2c8: i2c@480 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <0x480 0x80>;
|
||||
|
|
@ -1031,7 +1031,7 @@ i2c8: i2c-bus@480 {
|
|||
status = "disabled";
|
||||
};
|
||||
|
||||
i2c9: i2c-bus@500 {
|
||||
i2c9: i2c@500 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <0x500 0x80>;
|
||||
|
|
@ -1045,7 +1045,7 @@ i2c9: i2c-bus@500 {
|
|||
status = "disabled";
|
||||
};
|
||||
|
||||
i2c10: i2c-bus@580 {
|
||||
i2c10: i2c@580 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <0x580 0x80>;
|
||||
|
|
@ -1059,7 +1059,7 @@ i2c10: i2c-bus@580 {
|
|||
status = "disabled";
|
||||
};
|
||||
|
||||
i2c11: i2c-bus@600 {
|
||||
i2c11: i2c@600 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <0x600 0x80>;
|
||||
|
|
@ -1073,7 +1073,7 @@ i2c11: i2c-bus@600 {
|
|||
status = "disabled";
|
||||
};
|
||||
|
||||
i2c12: i2c-bus@680 {
|
||||
i2c12: i2c@680 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <0x680 0x80>;
|
||||
|
|
@ -1087,7 +1087,7 @@ i2c12: i2c-bus@680 {
|
|||
status = "disabled";
|
||||
};
|
||||
|
||||
i2c13: i2c-bus@700 {
|
||||
i2c13: i2c@700 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <0x700 0x80>;
|
||||
|
|
@ -1101,7 +1101,7 @@ i2c13: i2c-bus@700 {
|
|||
status = "disabled";
|
||||
};
|
||||
|
||||
i2c14: i2c-bus@780 {
|
||||
i2c14: i2c@780 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <0x780 0x80>;
|
||||
|
|
@ -1115,7 +1115,7 @@ i2c14: i2c-bus@780 {
|
|||
status = "disabled";
|
||||
};
|
||||
|
||||
i2c15: i2c-bus@800 {
|
||||
i2c15: i2c@800 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <0x800 0x80>;
|
||||
|
|
|
|||
|
|
@ -30,7 +30,7 @@ display: display {
|
|||
|
||||
display-timings {
|
||||
native-mode = <&timing0>;
|
||||
timing0: 320x240 {
|
||||
timing0: timing-320x240 {
|
||||
hactive = <320>;
|
||||
hback-porch = <0>;
|
||||
hfront-porch = <0>;
|
||||
|
|
|
|||
|
|
@ -90,11 +90,18 @@ gpio-poweroff {
|
|||
timeout-ms = <5000>;
|
||||
};
|
||||
|
||||
gpio-beeper {
|
||||
compatible = "gpio-beeper";
|
||||
gpio_pwm: pwm {
|
||||
#pwm-cells = <3>;
|
||||
compatible = "pwm-gpio";
|
||||
gpios = <&gpio0 4 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
beeper {
|
||||
compatible = "pwm-beeper";
|
||||
pwms = <&gpio_pwm 0 1 0>;
|
||||
beeper-hz = <1000>;
|
||||
};
|
||||
|
||||
soc {
|
||||
bus@c4000000 {
|
||||
/* The first 16MB region at CS0 on the expansion bus */
|
||||
|
|
|
|||
|
|
@ -168,7 +168,6 @@ mbusc: mbus-controller@20000 {
|
|||
mpic: interrupt-controller@20a00 {
|
||||
compatible = "marvell,mpic";
|
||||
#interrupt-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
interrupt-controller;
|
||||
msi-controller;
|
||||
};
|
||||
|
|
|
|||
|
|
@ -376,7 +376,6 @@ mpic: interrupt-controller@20a00 {
|
|||
compatible = "marvell,mpic";
|
||||
reg = <0x20a00 0x2d0>, <0x21070 0x58>;
|
||||
#interrupt-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
interrupt-controller;
|
||||
msi-controller;
|
||||
interrupts = <GIC_PPI 15 IRQ_TYPE_LEVEL_HIGH>;
|
||||
|
|
|
|||
|
|
@ -43,6 +43,17 @@ uart0: serial@12000 {
|
|||
};
|
||||
};
|
||||
};
|
||||
|
||||
led-7seg {
|
||||
compatible = "gpio-7-segment";
|
||||
segment-gpios = <&led_7seg_gpio 0 GPIO_ACTIVE_LOW>,
|
||||
<&led_7seg_gpio 1 GPIO_ACTIVE_LOW>,
|
||||
<&led_7seg_gpio 2 GPIO_ACTIVE_LOW>,
|
||||
<&led_7seg_gpio 3 GPIO_ACTIVE_LOW>,
|
||||
<&led_7seg_gpio 4 GPIO_ACTIVE_LOW>,
|
||||
<&led_7seg_gpio 5 GPIO_ACTIVE_LOW>,
|
||||
<&led_7seg_gpio 6 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
};
|
||||
|
||||
&pciec {
|
||||
|
|
@ -149,7 +160,7 @@ i2c@3 {
|
|||
#size-cells = <0>;
|
||||
reg = <3>;
|
||||
|
||||
gpio@20 {
|
||||
led_7seg_gpio: gpio@20 {
|
||||
compatible = "nxp,pca9554";
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
|
|
|
|||
|
|
@ -112,6 +112,19 @@ sfp: sfp {
|
|||
status = "disabled";
|
||||
};
|
||||
|
||||
gpio-keys {
|
||||
compatible = "gpio-keys";
|
||||
|
||||
front-button {
|
||||
label = "Front Button";
|
||||
linux,code = <KEY_VENDOR>;
|
||||
linux,can-disable;
|
||||
gpios = <&mcu 0 12 GPIO_ACTIVE_HIGH>;
|
||||
/* debouncing is done by the microcontroller */
|
||||
debounce-interval = <0>;
|
||||
};
|
||||
};
|
||||
|
||||
sound {
|
||||
compatible = "simple-audio-card";
|
||||
simple-audio-card,name = "SPDIF";
|
||||
|
|
@ -218,7 +231,22 @@ i2c@0 {
|
|||
#size-cells = <0>;
|
||||
reg = <0>;
|
||||
|
||||
/* STM32F0 command interface at address 0x2a */
|
||||
mcu: system-controller@2a {
|
||||
compatible = "cznic,turris-omnia-mcu";
|
||||
reg = <0x2a>;
|
||||
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&mcu_pins>;
|
||||
|
||||
interrupt-parent = <&gpio1>;
|
||||
interrupts = <11 IRQ_TYPE_NONE>;
|
||||
|
||||
gpio-controller;
|
||||
#gpio-cells = <3>;
|
||||
|
||||
interrupt-controller;
|
||||
#interrupt-cells = <2>;
|
||||
};
|
||||
|
||||
led-controller@2b {
|
||||
compatible = "cznic,turris-omnia-leds";
|
||||
|
|
@ -501,6 +529,11 @@ fixed-link {
|
|||
};
|
||||
|
||||
&pinctrl {
|
||||
mcu_pins: mcu-pins {
|
||||
marvell,pins = "mpp43";
|
||||
marvell,function = "gpio";
|
||||
};
|
||||
|
||||
pcawan_pins: pcawan-pins {
|
||||
marvell,pins = "mpp46";
|
||||
marvell,function = "gpio";
|
||||
|
|
|
|||
|
|
@ -408,7 +408,6 @@ mpic: interrupt-controller@20a00 {
|
|||
compatible = "marvell,mpic";
|
||||
reg = <0x20a00 0x2d0>, <0x21070 0x58>;
|
||||
#interrupt-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
interrupt-controller;
|
||||
msi-controller;
|
||||
interrupts = <GIC_PPI 15 IRQ_TYPE_LEVEL_HIGH>;
|
||||
|
|
|
|||
|
|
@ -268,7 +268,6 @@ mpic: interrupt-controller@20a00 {
|
|||
compatible = "marvell,mpic";
|
||||
reg = <0x20a00 0x2d0>, <0x21070 0x58>;
|
||||
#interrupt-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
interrupt-controller;
|
||||
msi-controller;
|
||||
interrupts = <GIC_PPI 15 IRQ_TYPE_LEVEL_HIGH>;
|
||||
|
|
|
|||
|
|
@ -35,13 +35,13 @@ gpio_poweroff {
|
|||
gpio_keys {
|
||||
compatible = "gpio-keys";
|
||||
|
||||
reset {
|
||||
button-reset {
|
||||
label = "Reset";
|
||||
linux,code = <KEY_POWER>;
|
||||
gpios = <&gpio0 29 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
button {
|
||||
button-power {
|
||||
label = "Power";
|
||||
linux,code = <KEY_SLEEP>;
|
||||
gpios = <&gpio0 26 GPIO_ACTIVE_LOW>;
|
||||
|
|
@ -51,7 +51,7 @@ button {
|
|||
gpio-leds {
|
||||
compatible = "gpio-leds";
|
||||
|
||||
blue-power {
|
||||
led-blue-power {
|
||||
label = "nas220:blue:power";
|
||||
gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
|
||||
linux,default-trigger = "default-on";
|
||||
|
|
|
|||
|
|
@ -29,25 +29,25 @@ keys {
|
|||
pinctrl-0 = <&pmx_buttons>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
power {
|
||||
button-power {
|
||||
label = "Power Button";
|
||||
linux,code = <KEY_POWER>;
|
||||
gpios = <&gpio1 16 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
reset {
|
||||
button-reset {
|
||||
label = "Reset Button";
|
||||
linux,code = <KEY_RESTART>;
|
||||
gpios = <&gpio1 17 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
usb1 {
|
||||
button-usb1 {
|
||||
label = "USB1 Button";
|
||||
linux,code = <BTN_0>;
|
||||
gpios = <&gpio0 28 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
usb2 {
|
||||
button-usb2 {
|
||||
label = "USB2 Button";
|
||||
linux,code = <BTN_1>;
|
||||
gpios = <&gpio0 29 GPIO_ACTIVE_LOW>;
|
||||
|
|
|
|||
|
|
@ -58,10 +58,8 @@ partition@0 {
|
|||
|
||||
gpio_keys {
|
||||
compatible = "gpio-keys";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
power {
|
||||
key-power {
|
||||
label = "Power push button";
|
||||
linux,code = <KEY_POWER>;
|
||||
gpios = <&gpio0 16 GPIO_ACTIVE_LOW>;
|
||||
|
|
@ -71,11 +69,11 @@ power {
|
|||
gpio-leds {
|
||||
compatible = "gpio-leds";
|
||||
|
||||
red-fail {
|
||||
led-red-fail {
|
||||
label = "cloudbox:red:fail";
|
||||
gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
blue-sata {
|
||||
led-blue-sata {
|
||||
label = "cloudbox:blue:sata";
|
||||
gpios = <&gpio0 15 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
|
|
|||
|
|
@ -37,7 +37,7 @@ NS_V2_LED_ON 1 1
|
|||
gpio-leds {
|
||||
compatible = "gpio-leds";
|
||||
|
||||
red-fail {
|
||||
led-red-fail {
|
||||
label = "d2net_v2:red:fail";
|
||||
gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
|
|
|||
|
|
@ -137,38 +137,38 @@ ehci@50000 {
|
|||
gpio-leds {
|
||||
compatible = "gpio-leds";
|
||||
|
||||
blue-usb {
|
||||
led-blue-usb {
|
||||
label = "dir665:blue:usb";
|
||||
gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
blue-internet {
|
||||
led-blue-internet {
|
||||
/* Can only be turned on if the Internet
|
||||
* Ethernet port has Link
|
||||
*/
|
||||
label = "dir665:blue:internet";
|
||||
gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
amber-internet {
|
||||
led-amber-internet {
|
||||
label = "dir665:amber:internet";
|
||||
gpios = <&gpio1 11 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
blue-wifi5g {
|
||||
led-blue-wifi5g {
|
||||
label = "dir665:blue:5g";
|
||||
gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
blue-status {
|
||||
led-blue-status {
|
||||
label = "dir665:blue:status";
|
||||
gpios = <&gpio1 13 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
blue-wps {
|
||||
led-blue-wps {
|
||||
label = "dir665:blue:wps";
|
||||
gpios = <&gpio1 15 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
amber-status {
|
||||
led-amber-status {
|
||||
label = "dir665:amber:status";
|
||||
gpios = <&gpio1 16 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
blue-24g {
|
||||
led-blue-24g {
|
||||
label = "dir665:blue:24g";
|
||||
gpios = <&gpio1 17 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
|
@ -176,15 +176,13 @@ blue-24g {
|
|||
|
||||
gpio-keys {
|
||||
compatible = "gpio-keys";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
reset {
|
||||
button-reset {
|
||||
label = "reset";
|
||||
linux,code = <KEY_RESTART>;
|
||||
gpios = <&gpio0 28 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
wps {
|
||||
button-wps {
|
||||
label = "wps";
|
||||
linux,code = <KEY_WPS_BUTTON>;
|
||||
gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
|
||||
|
|
|
|||
|
|
@ -24,24 +24,24 @@ &pmx_led_red_left_hdd &pmx_led_red_right_hdd
|
|||
&pmx_led_white_usb>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
blue-power {
|
||||
led-blue-power {
|
||||
label = "dns320:blue:power";
|
||||
gpios = <&gpio0 26 GPIO_ACTIVE_LOW>;
|
||||
default-state = "keep";
|
||||
};
|
||||
blue-usb {
|
||||
led-blue-usb {
|
||||
label = "dns320:blue:usb";
|
||||
gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
orange-l_hdd {
|
||||
led-orange-l_hdd {
|
||||
label = "dns320:orange:l_hdd";
|
||||
gpios = <&gpio0 28 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
orange-r_hdd {
|
||||
led-orange-r_hdd {
|
||||
label = "dns320:orange:r_hdd";
|
||||
gpios = <&gpio0 27 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
orange-usb {
|
||||
led-orange-usb {
|
||||
label = "dns320:orange:usb";
|
||||
gpios = <&gpio1 3 GPIO_ACTIVE_LOW>; /* GPIO 35 */
|
||||
};
|
||||
|
|
|
|||
|
|
@ -24,24 +24,24 @@ &pmx_led_red_left_hdd &pmx_led_red_right_hdd
|
|||
&pmx_led_white_usb>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
white-power {
|
||||
led-white-power {
|
||||
label = "dns325:white:power";
|
||||
gpios = <&gpio0 26 GPIO_ACTIVE_LOW>;
|
||||
default-state = "keep";
|
||||
};
|
||||
white-usb {
|
||||
led-white-usb {
|
||||
label = "dns325:white:usb";
|
||||
gpios = <&gpio1 11 GPIO_ACTIVE_LOW>; /* GPIO 43 */
|
||||
};
|
||||
red-l_hdd {
|
||||
led-red-l_hdd {
|
||||
label = "dns325:red:l_hdd";
|
||||
gpios = <&gpio0 28 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
red-r_hdd {
|
||||
led-red-r_hdd {
|
||||
label = "dns325:red:r_hdd";
|
||||
gpios = <&gpio0 27 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
red-usb {
|
||||
led-red-usb {
|
||||
label = "dns325:red:usb";
|
||||
gpios = <&gpio0 29 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
|
|
|||
|
|
@ -8,23 +8,21 @@ / {
|
|||
|
||||
gpio_keys {
|
||||
compatible = "gpio-keys";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
pinctrl-0 = <&pmx_button_power &pmx_button_unmount
|
||||
&pmx_button_reset>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
power {
|
||||
button-power {
|
||||
label = "Power button";
|
||||
linux,code = <KEY_POWER>;
|
||||
gpios = <&gpio1 2 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
eject {
|
||||
button-eject {
|
||||
label = "USB unmount button";
|
||||
linux,code = <KEY_EJECTCD>;
|
||||
gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
reset {
|
||||
button-reset {
|
||||
label = "Reset button";
|
||||
linux,code = <KEY_RESTART>;
|
||||
gpios = <&gpio1 16 GPIO_ACTIVE_LOW>;
|
||||
|
|
|
|||
|
|
@ -42,12 +42,12 @@ gpio-leds {
|
|||
pinctrl-0 = <&pmx_led_green &pmx_led_orange>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
health {
|
||||
led-health {
|
||||
label = "status:green:health";
|
||||
gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
|
||||
default-state = "keep";
|
||||
};
|
||||
fault {
|
||||
led-fault {
|
||||
label = "status:orange:fault";
|
||||
gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
|
|
|||
|
|
@ -85,15 +85,15 @@ gpio-leds {
|
|||
&pmx_led_wifi_ap >;
|
||||
pinctrl-names = "default";
|
||||
|
||||
bluetooth {
|
||||
led-bluetooth {
|
||||
label = "dreamplug:blue:bluetooth";
|
||||
gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
wifi {
|
||||
led-wifi {
|
||||
label = "dreamplug:green:wifi";
|
||||
gpios = <&gpio1 16 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
wifi-ap {
|
||||
led-wifi-ap {
|
||||
label = "dreamplug:green:wifi_ap";
|
||||
gpios = <&gpio1 17 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
|
|
|||
|
|
@ -85,44 +85,44 @@ &pmx_led_right_cap_2 &pmx_led_right_cap_3
|
|||
>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
health {
|
||||
led-health {
|
||||
label = "status:green:health";
|
||||
gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
|
||||
default-state = "keep";
|
||||
};
|
||||
fault {
|
||||
led-fault {
|
||||
label = "status:orange:fault";
|
||||
gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
left0 {
|
||||
led-left0 {
|
||||
label = "status:white:left0";
|
||||
gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
left1 {
|
||||
led-left1 {
|
||||
label = "status:white:left1";
|
||||
gpios = <&gpio1 11 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
left2 {
|
||||
led-left2 {
|
||||
label = "status:white:left2";
|
||||
gpios = <&gpio1 12 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
left3 {
|
||||
led-left3 {
|
||||
label = "status:white:left3";
|
||||
gpios = <&gpio1 13 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
right0 {
|
||||
led-right0 {
|
||||
label = "status:white:right0";
|
||||
gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
right1 {
|
||||
led-right1 {
|
||||
label = "status:white:right1";
|
||||
gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
right2 {
|
||||
led-right2 {
|
||||
label = "status:white:right2";
|
||||
gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
right3 {
|
||||
led-right3 {
|
||||
label = "status:white:right3";
|
||||
gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
|
|
|||
|
|
@ -59,19 +59,19 @@ gpio-leds {
|
|||
&pmx_led_wmode_r &pmx_led_wmode_g >;
|
||||
pinctrl-names = "default";
|
||||
|
||||
health-r {
|
||||
led-health-r {
|
||||
label = "guruplug:red:health";
|
||||
gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
health-g {
|
||||
led-health-g {
|
||||
label = "guruplug:green:health";
|
||||
gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
wmode-r {
|
||||
led-wmode-r {
|
||||
label = "guruplug:red:wmode";
|
||||
gpios = <&gpio1 16 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
wmode-g {
|
||||
led-wmode-g {
|
||||
label = "guruplug:green:wmode";
|
||||
gpios = <&gpio1 17 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
|
|
|||
|
|
@ -58,17 +58,15 @@ sata@80000 {
|
|||
|
||||
gpio_keys {
|
||||
compatible = "gpio-keys";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
pinctrl-0 = <&pmx_button_reset &pmx_button_usb_copy>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
copy {
|
||||
button-copy {
|
||||
label = "USB Copy";
|
||||
linux,code = <KEY_COPY>;
|
||||
gpios = <&gpio0 29 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
reset {
|
||||
button-reset {
|
||||
label = "Reset";
|
||||
linux,code = <KEY_RESTART>;
|
||||
gpios = <&gpio0 28 GPIO_ACTIVE_LOW>;
|
||||
|
|
@ -81,16 +79,16 @@ gpio-leds {
|
|||
&pmx_led_usb_transfer>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
green-os {
|
||||
led-green-os {
|
||||
label = "ib62x0:green:os";
|
||||
gpios = <&gpio0 25 GPIO_ACTIVE_HIGH>;
|
||||
default-state = "keep";
|
||||
};
|
||||
red-os {
|
||||
led-red-os {
|
||||
label = "ib62x0:red:os";
|
||||
gpios = <&gpio0 22 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
usb-copy {
|
||||
led-usb-copy {
|
||||
label = "ib62x0:red:usb_copy";
|
||||
gpios = <&gpio0 27 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
|
|
|||
|
|
@ -89,32 +89,32 @@ led-level {
|
|||
gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>;
|
||||
default-state = "on";
|
||||
};
|
||||
power-blue {
|
||||
led-power-blue {
|
||||
label = "power:blue";
|
||||
gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>;
|
||||
default-state = "keep";
|
||||
};
|
||||
power-red {
|
||||
led-power-red {
|
||||
label = "power:red";
|
||||
gpios = <&gpio1 11 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
usb1 {
|
||||
led-usb1 {
|
||||
label = "usb1:blue";
|
||||
gpios = <&gpio1 12 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
usb2 {
|
||||
led-usb2 {
|
||||
label = "usb2:blue";
|
||||
gpios = <&gpio1 13 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
usb3 {
|
||||
led-usb3 {
|
||||
label = "usb3:blue";
|
||||
gpios = <&gpio1 14 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
usb4 {
|
||||
led-usb4 {
|
||||
label = "usb4:blue";
|
||||
gpios = <&gpio1 15 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
otb {
|
||||
led-otb {
|
||||
label = "otb:blue";
|
||||
gpios = <&gpio1 16 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
|
@ -122,18 +122,16 @@ otb {
|
|||
|
||||
gpio_keys {
|
||||
compatible = "gpio-keys";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
pinctrl-0 = < &pmx_button_reset &pmx_button_otb >;
|
||||
pinctrl-names = "default";
|
||||
|
||||
otb {
|
||||
button-otb {
|
||||
label = "OTB Button";
|
||||
linux,code = <KEY_COPY>;
|
||||
gpios = <&gpio1 3 GPIO_ACTIVE_LOW>;
|
||||
debounce-interval = <100>;
|
||||
};
|
||||
reset {
|
||||
button-reset {
|
||||
label = "Reset";
|
||||
linux,code = <KEY_RESTART>;
|
||||
gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
|
||||
|
|
|
|||
|
|
@ -127,44 +127,42 @@ gpio-leds {
|
|||
&pmx_led_rebuild &pmx_led_health >;
|
||||
pinctrl-names = "default";
|
||||
|
||||
power_led {
|
||||
led-power-led {
|
||||
label = "status:white:power_led";
|
||||
gpios = <&gpio0 16 GPIO_ACTIVE_HIGH>;
|
||||
default-state = "keep";
|
||||
};
|
||||
rebuild_led {
|
||||
led-rebuild-led {
|
||||
label = "status:white:rebuild_led";
|
||||
gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
health_led {
|
||||
led-health-led {
|
||||
label = "status:red:health_led";
|
||||
gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
backup_led {
|
||||
led-backup-led {
|
||||
label = "status:blue:backup_led";
|
||||
gpios = <&gpio0 15 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
};
|
||||
gpio-keys {
|
||||
compatible = "gpio-keys";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
pinctrl-0 = <&pmx_button_reset &pmx_button_power
|
||||
&pmx_button_otb>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
|
||||
Power {
|
||||
button-power {
|
||||
label = "Power Button";
|
||||
linux,code = <KEY_POWER>;
|
||||
gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
Reset {
|
||||
button-reset {
|
||||
label = "Reset Button";
|
||||
linux,code = <KEY_RESTART>;
|
||||
gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
OTB {
|
||||
button-otb {
|
||||
label = "OTB Button";
|
||||
linux,code = <KEY_COPY>;
|
||||
gpios = <&gpio1 3 GPIO_ACTIVE_LOW>;
|
||||
|
|
|
|||
|
|
@ -97,52 +97,52 @@ rtc@30 {
|
|||
leds {
|
||||
compatible = "gpio-leds";
|
||||
|
||||
status_green {
|
||||
led-status-green {
|
||||
label = "l-50:green:status";
|
||||
gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
status_red {
|
||||
led-status-red {
|
||||
label = "l-50:red:status";
|
||||
gpios = <&gpio3 2 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
wifi {
|
||||
led-wifi {
|
||||
label = "l-50:green:wifi";
|
||||
gpios = <&gpio2 7 GPIO_ACTIVE_LOW>;
|
||||
linux,default-trigger = "phy0tpt";
|
||||
};
|
||||
|
||||
internet_green {
|
||||
led-internet-green {
|
||||
label = "l-50:green:internet";
|
||||
gpios = <&gpio2 3 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
internet_red {
|
||||
led-internet-red {
|
||||
label = "l-50:red:internet";
|
||||
gpios = <&gpio2 1 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
usb1_green {
|
||||
led-usb1-green {
|
||||
label = "l-50:green:usb1";
|
||||
gpios = <&gpio2 0 GPIO_ACTIVE_LOW>;
|
||||
linux,default-trigger = "usbport";
|
||||
trigger-sources = <&hub_port3>;
|
||||
};
|
||||
|
||||
usb1_red {
|
||||
led-usb1-red {
|
||||
label = "l-50:red:usb1";
|
||||
gpios = <&gpio2 4 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
usb2_green {
|
||||
led-usb2-green {
|
||||
label = "l-50:green:usb2";
|
||||
gpios = <&gpio2 2 GPIO_ACTIVE_LOW>;
|
||||
linux,default-trigger = "usbport";
|
||||
trigger-sources = <&hub_port1>;
|
||||
};
|
||||
|
||||
usb2_red {
|
||||
led-usb2-red {
|
||||
label = "l-50:red:usb2";
|
||||
gpios = <&gpio2 5 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
|
@ -193,7 +193,7 @@ express_card_pwr {
|
|||
keys {
|
||||
compatible = "gpio-keys";
|
||||
|
||||
factory_defaults {
|
||||
button-factory-defaults {
|
||||
label = "factory_defaults";
|
||||
gpios = <&gpio0 29 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <KEY_RESTART>;
|
||||
|
|
|
|||
|
|
@ -51,7 +51,7 @@ pmx_usb_power_enable: pmx-usb-power-enable {
|
|||
gpio_keys {
|
||||
compatible = "gpio-keys";
|
||||
|
||||
power {
|
||||
button-power {
|
||||
label = "Power push button";
|
||||
linux,code = <KEY_POWER>;
|
||||
gpios = <&gpio1 0 GPIO_ACTIVE_HIGH>;
|
||||
|
|
@ -61,11 +61,11 @@ power {
|
|||
gpio-leds {
|
||||
compatible = "gpio-leds";
|
||||
|
||||
red-fail {
|
||||
led-red-fail {
|
||||
label = "laplug_v2:red:power";
|
||||
gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
blue-power {
|
||||
led-blue-power {
|
||||
label = "laplug_v2:blue:power";
|
||||
gpios = <&gpio0 29 GPIO_ACTIVE_HIGH>;
|
||||
linux,default-trigger = "default-on";
|
||||
|
|
|
|||
|
|
@ -88,8 +88,6 @@ partition@70000 {
|
|||
|
||||
gpio_keys {
|
||||
compatible = "gpio-keys";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
pinctrl-0 = <&pmx_button_function &pmx_power_switch
|
||||
&pmx_power_auto_switch>;
|
||||
pinctrl-names = "default";
|
||||
|
|
|
|||
|
|
@ -33,18 +33,16 @@ chosen {
|
|||
|
||||
gpio_keys {
|
||||
compatible = "gpio-keys";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
pinctrl-0 = < &pmx_btn_wps &pmx_btn_reset >;
|
||||
pinctrl-names = "default";
|
||||
|
||||
wps {
|
||||
button-wps {
|
||||
label = "WPS Button";
|
||||
linux,code = <KEY_WPS_BUTTON>;
|
||||
gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
reset {
|
||||
button-reset {
|
||||
label = "Reset Button";
|
||||
linux,code = <KEY_RESTART>;
|
||||
gpios = <&gpio1 16 GPIO_ACTIVE_LOW>;
|
||||
|
|
@ -56,12 +54,12 @@ gpio-leds {
|
|||
pinctrl-0 = < &pmx_led_white_health &pmx_led_white_pulse >;
|
||||
pinctrl-names = "default";
|
||||
|
||||
white-health {
|
||||
led-white-health {
|
||||
label = "viper:white:health";
|
||||
gpios = <&gpio0 7 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
white-pulse {
|
||||
led-white-pulse {
|
||||
label = "viper:white:pulse";
|
||||
gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
|
|
|||
|
|
@ -107,24 +107,22 @@ partition@70000 {
|
|||
|
||||
gpio_keys {
|
||||
compatible = "gpio-keys";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
pinctrl-0 = <&pmx_button_function &pmx_power_switch
|
||||
&pmx_power_auto_switch>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
option {
|
||||
button-option {
|
||||
label = "Function Button";
|
||||
linux,code = <KEY_OPTION>;
|
||||
gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
reserved {
|
||||
button-reserved {
|
||||
label = "Power-on Switch";
|
||||
linux,code = <KEY_RESERVED>;
|
||||
linux,input-type = <5>;
|
||||
gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
power {
|
||||
button-power {
|
||||
label = "Power-auto Switch";
|
||||
linux,code = <KEY_ESC>;
|
||||
linux,input-type = <5>;
|
||||
|
|
@ -139,28 +137,28 @@ &pmx_led_info &pmx_led_power
|
|||
&pmx_led_function_blue>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
func_blue {
|
||||
led-func-blue {
|
||||
label = "lsxl:blue:func";
|
||||
gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
alarm {
|
||||
led-alarm {
|
||||
label = "lsxl:red:alarm";
|
||||
gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
info {
|
||||
led-info {
|
||||
label = "lsxl:amber:info";
|
||||
gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
power {
|
||||
led-power {
|
||||
label = "lsxl:blue:power";
|
||||
gpios = <&gpio1 7 GPIO_ACTIVE_LOW>;
|
||||
default-state = "keep";
|
||||
};
|
||||
|
||||
func_red {
|
||||
led-func-red {
|
||||
label = "lsxl:red:func";
|
||||
gpios = <&gpio1 16 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
|
|
|||
|
|
@ -114,36 +114,36 @@ &pmx_led_user0g &pmx_led_misc
|
|||
>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
health {
|
||||
led-health {
|
||||
label = "status:green:health";
|
||||
gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
user1o {
|
||||
led-user1o {
|
||||
label = "user1:orange";
|
||||
gpios = <&gpio1 8 GPIO_ACTIVE_LOW>;
|
||||
default-state = "on";
|
||||
};
|
||||
|
||||
user1g {
|
||||
led-user1g {
|
||||
label = "user1:green";
|
||||
gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
|
||||
default-state = "on";
|
||||
};
|
||||
|
||||
user0o {
|
||||
led-user0o {
|
||||
label = "user0:orange";
|
||||
gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
|
||||
default-state = "on";
|
||||
};
|
||||
|
||||
user0g {
|
||||
led-user0g {
|
||||
label = "user0:green";
|
||||
gpios = <&gpio1 13 GPIO_ACTIVE_LOW>;
|
||||
default-state = "on";
|
||||
};
|
||||
|
||||
misc {
|
||||
led-misc {
|
||||
label = "status:orange:misc";
|
||||
gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
|
||||
default-state = "on";
|
||||
|
|
|
|||
|
|
@ -73,17 +73,17 @@ gpio-leds {
|
|||
pinctrl-0 = <&pmx_leds &pmx_usb_led>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
green-status {
|
||||
led-green-status {
|
||||
label = "gtw:green:Status";
|
||||
gpios = <&gpio0 20 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
red-status {
|
||||
led-red-status {
|
||||
label = "gtw:red:Status";
|
||||
gpios = <&gpio0 21 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
green-usb {
|
||||
led-green-usb {
|
||||
label = "gtw:green:USB";
|
||||
gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
|
@ -91,17 +91,15 @@ green-usb {
|
|||
|
||||
gpio_keys {
|
||||
compatible = "gpio-keys";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
pinctrl-0 = <&pmx_keys>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
restart {
|
||||
button-restart {
|
||||
label = "SWR Button";
|
||||
linux,code = <KEY_RESTART>;
|
||||
gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
wps {
|
||||
button-wps {
|
||||
label = "WPS Button";
|
||||
linux,code = <KEY_WPS_BUTTON>;
|
||||
gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
|
||||
|
|
|
|||
|
|
@ -53,26 +53,24 @@ sata@80000 {
|
|||
|
||||
gpio-keys {
|
||||
compatible = "gpio-keys";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
/*
|
||||
* esc and power represent a three position rocker
|
||||
* switch. Thus the conventional KEY_POWER does not fit
|
||||
*/
|
||||
exc {
|
||||
button-exc {
|
||||
label = "Back power switch (on|auto)";
|
||||
linux,code = <KEY_ESC>;
|
||||
linux,input-type = <5>;
|
||||
gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
power {
|
||||
button-power {
|
||||
label = "Back power switch (auto|off)";
|
||||
linux,code = <KEY_1>;
|
||||
linux,input-type = <5>;
|
||||
gpios = <&gpio0 15 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
option {
|
||||
button-option {
|
||||
label = "Function button";
|
||||
linux,code = <KEY_OPTION>;
|
||||
gpios = <&gpio1 2 GPIO_ACTIVE_LOW>;
|
||||
|
|
|
|||
|
|
@ -55,10 +55,8 @@ eeprom@50 {
|
|||
|
||||
gpio_keys {
|
||||
compatible = "gpio-keys";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
power {
|
||||
button-power {
|
||||
label = "Power push button";
|
||||
linux,code = <KEY_POWER>;
|
||||
gpios = <&gpio1 0 GPIO_ACTIVE_HIGH>;
|
||||
|
|
@ -68,7 +66,7 @@ power {
|
|||
gpio-leds {
|
||||
compatible = "gpio-leds";
|
||||
|
||||
red-fail {
|
||||
led-red-fail {
|
||||
label = "ns2:red:fail";
|
||||
gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
|
|
|||
|
|
@ -24,7 +24,7 @@ sata@80000 {
|
|||
gpio-leds {
|
||||
compatible = "gpio-leds";
|
||||
|
||||
blue-sata {
|
||||
led-blue-sata {
|
||||
label = "ns2:blue:sata";
|
||||
gpios = <&gpio0 30 GPIO_ACTIVE_LOW>;
|
||||
linux,default-trigger = "disk-activity";
|
||||
|
|
|
|||
|
|
@ -87,43 +87,43 @@ &pmx_led_copy_green &pmx_led_copy_red
|
|||
&pmx_led_hdd_green &pmx_led_hdd_red>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
green-sys {
|
||||
led-green-sys {
|
||||
label = "nsa310:green:sys";
|
||||
gpios = <&gpio0 28 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
red-sys {
|
||||
led-red-sys {
|
||||
label = "nsa310:red:sys";
|
||||
gpios = <&gpio0 29 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
green-hdd {
|
||||
led-green-hdd {
|
||||
label = "nsa310:green:hdd";
|
||||
gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
red-hdd {
|
||||
led-red-hdd {
|
||||
label = "nsa310:red:hdd";
|
||||
gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
green-esata {
|
||||
led-green-esata {
|
||||
label = "nsa310:green:esata";
|
||||
gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
red-esata {
|
||||
led-red-esata {
|
||||
label = "nsa310:red:esata";
|
||||
gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
green-usb {
|
||||
led-green-usb {
|
||||
label = "nsa310:green:usb";
|
||||
gpios = <&gpio0 15 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
red-usb {
|
||||
led-red-usb {
|
||||
label = "nsa310:red:usb";
|
||||
gpios = <&gpio0 16 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
green-copy {
|
||||
led-green-copy {
|
||||
label = "nsa310:green:copy";
|
||||
gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
red-copy {
|
||||
led-red-copy {
|
||||
label = "nsa310:red:copy";
|
||||
gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
|
|
|||
|
|
@ -75,39 +75,39 @@ lm85: lm85@2e {
|
|||
gpio-leds {
|
||||
compatible = "gpio-leds";
|
||||
|
||||
green-sys {
|
||||
led-green-sys {
|
||||
label = "nsa310:green:sys";
|
||||
gpios = <&gpio0 28 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
red-sys {
|
||||
led-red-sys {
|
||||
label = "nsa310:red:sys";
|
||||
gpios = <&gpio0 29 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
green-hdd {
|
||||
led-green-hdd {
|
||||
label = "nsa310:green:hdd";
|
||||
gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
red-hdd {
|
||||
led-red-hdd {
|
||||
label = "nsa310:red:hdd";
|
||||
gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
green-esata {
|
||||
led-green-esata {
|
||||
label = "nsa310:green:esata";
|
||||
gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
red-esata {
|
||||
led-red-esata {
|
||||
label = "nsa310:red:esata";
|
||||
gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
green-usb {
|
||||
led-green-usb {
|
||||
label = "nsa310:green:usb";
|
||||
gpios = <&gpio0 15 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
green-copy {
|
||||
led-green-copy {
|
||||
label = "nsa310:green:copy";
|
||||
gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
red-copy {
|
||||
led-red-copy {
|
||||
label = "nsa310:red:copy";
|
||||
gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
|
|
|||
|
|
@ -35,24 +35,22 @@ gpio_poweroff {
|
|||
|
||||
keys {
|
||||
compatible = "gpio-keys";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
pinctrl-0 = <&pmx_buttons>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
power {
|
||||
button-power {
|
||||
label = "Power Button";
|
||||
linux,code = <KEY_POWER>;
|
||||
gpios = <&gpio0 26 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
copy {
|
||||
button-copy {
|
||||
label = "Copy Button";
|
||||
linux,code = <KEY_COPY>;
|
||||
gpios = <&gpio0 25 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
reset {
|
||||
button-reset {
|
||||
label = "Reset Button";
|
||||
linux,code = <KEY_RESTART>;
|
||||
gpios = <&gpio0 24 GPIO_ACTIVE_LOW>;
|
||||
|
|
|
|||
|
|
@ -142,39 +142,39 @@ &pmx_led_copy_green &pmx_led_copy_red
|
|||
&pmx_led_hdd1_green &pmx_led_hdd1_red>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
green-sys {
|
||||
led-green-sys {
|
||||
label = "nsa320:green:sys";
|
||||
gpios = <&gpio0 28 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
orange-sys {
|
||||
led-orange-sys {
|
||||
label = "nsa320:orange:sys";
|
||||
gpios = <&gpio0 29 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
green-hdd1 {
|
||||
led-green-hdd1 {
|
||||
label = "nsa320:green:hdd1";
|
||||
gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
red-hdd1 {
|
||||
led-red-hdd1 {
|
||||
label = "nsa320:red:hdd1";
|
||||
gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
green-hdd2 {
|
||||
led-green-hdd2 {
|
||||
label = "nsa320:green:hdd2";
|
||||
gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
red-hdd2 {
|
||||
led-red-hdd2 {
|
||||
label = "nsa320:red:hdd2";
|
||||
gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
green-usb {
|
||||
led-green-usb {
|
||||
label = "nsa320:green:usb";
|
||||
gpios = <&gpio0 15 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
green-copy {
|
||||
led-green-copy {
|
||||
label = "nsa320:green:copy";
|
||||
gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
red-copy {
|
||||
led-red-copy {
|
||||
label = "nsa320:red:copy";
|
||||
gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
|
|
|||
|
|
@ -162,39 +162,39 @@ &pmx_led_copy_green &pmx_led_copy_red
|
|||
&pmx_led_hdd1_green &pmx_led_hdd1_red>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
green-sys {
|
||||
led-green-sys {
|
||||
label = "nsa325:green:sys";
|
||||
gpios = <&gpio0 28 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
orange-sys {
|
||||
led-orange-sys {
|
||||
label = "nsa325:orange:sys";
|
||||
gpios = <&gpio0 29 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
green-hdd1 {
|
||||
led-green-hdd1 {
|
||||
label = "nsa325:green:hdd1";
|
||||
gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
red-hdd1 {
|
||||
led-red-hdd1 {
|
||||
label = "nsa325:red:hdd1";
|
||||
gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
green-hdd2 {
|
||||
led-green-hdd2 {
|
||||
label = "nsa325:green:hdd2";
|
||||
gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
red-hdd2 {
|
||||
led-red-hdd2 {
|
||||
label = "nsa325:red:hdd2";
|
||||
gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
green-usb {
|
||||
led-green-usb {
|
||||
label = "nsa325:green:usb";
|
||||
gpios = <&gpio0 15 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
green-copy {
|
||||
led-green-copy {
|
||||
label = "nsa325:green:copy";
|
||||
gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
red-copy {
|
||||
led-red-copy {
|
||||
label = "nsa325:red:copy";
|
||||
gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
|
|
|||
|
|
@ -63,22 +63,20 @@ gpio_poweroff {
|
|||
|
||||
gpio_keys {
|
||||
compatible = "gpio-keys";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
pinctrl-0 = <&pmx_btn_reset &pmx_btn_copy &pmx_btn_power>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
power {
|
||||
button-power {
|
||||
label = "Power Button";
|
||||
linux,code = <KEY_POWER>;
|
||||
gpios = <&gpio1 14 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
copy {
|
||||
button-copy {
|
||||
label = "Copy Button";
|
||||
linux,code = <KEY_COPY>;
|
||||
gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
reset {
|
||||
button-reset {
|
||||
label = "Reset Button";
|
||||
linux,code = <KEY_RESTART>;
|
||||
gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
|
||||
|
|
|
|||
|
|
@ -115,10 +115,8 @@ gpio_keys {
|
|||
compatible = "gpio-keys";
|
||||
pinctrl-0 = <&pmx_gpio_init>;
|
||||
pinctrl-names = "default";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
power {
|
||||
button-power {
|
||||
label = "Init Button";
|
||||
linux,code = <KEY_POWER>;
|
||||
gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>;
|
||||
|
|
|
|||
|
|
@ -136,8 +136,6 @@ gpio_keys {
|
|||
compatible = "gpio-keys";
|
||||
pinctrl-0 = <&pmx_gpio_init>;
|
||||
pinctrl-names = "default";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
button {
|
||||
label = "Init Button";
|
||||
|
|
|
|||
|
|
@ -33,12 +33,12 @@ chosen {
|
|||
gpio-leds {
|
||||
compatible = "gpio-leds";
|
||||
|
||||
health {
|
||||
led-health {
|
||||
label = "pogo_e02:green:health";
|
||||
gpios = <&gpio1 16 GPIO_ACTIVE_LOW>;
|
||||
default-state = "keep";
|
||||
};
|
||||
fault {
|
||||
led-fault {
|
||||
label = "pogo_e02:orange:fault";
|
||||
gpios = <&gpio1 17 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
|
|
|||
|
|
@ -29,12 +29,10 @@ chosen {
|
|||
|
||||
gpio_keys {
|
||||
compatible = "gpio-keys";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
pinctrl-0 = <&pmx_button_eject>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
eject {
|
||||
button-eject {
|
||||
debounce-interval = <50>;
|
||||
wakeup-source;
|
||||
linux,code = <KEY_EJECTCD>;
|
||||
|
|
@ -48,12 +46,12 @@ gpio-leds {
|
|||
pinctrl-0 = <&pmx_led_green &pmx_led_red>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
health {
|
||||
led-health {
|
||||
label = "pogoplugv4:green:health";
|
||||
gpios = <&gpio0 22 GPIO_ACTIVE_LOW>;
|
||||
default-state = "on";
|
||||
};
|
||||
fault {
|
||||
led-fault {
|
||||
label = "pogoplugv4:red:fault";
|
||||
gpios = <&gpio0 24 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
|
|
|||
|
|
@ -33,7 +33,7 @@ gpio-leds {
|
|||
pinctrl-0 = <&pmx_led_blue>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
health {
|
||||
led-health {
|
||||
label = "sheevaplug:blue:health";
|
||||
gpios = <&gpio1 17 GPIO_ACTIVE_LOW>;
|
||||
default-state = "keep";
|
||||
|
|
|
|||
|
|
@ -28,13 +28,13 @@ gpio-leds {
|
|||
pinctrl-0 = <&pmx_led_blue &pmx_led_red>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
health {
|
||||
led-health {
|
||||
label = "sheevaplug:blue:health";
|
||||
gpios = <&gpio1 17 GPIO_ACTIVE_LOW>;
|
||||
default-state = "keep";
|
||||
};
|
||||
|
||||
misc {
|
||||
led-misc {
|
||||
label = "sheevaplug:red:misc";
|
||||
gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
|
|
|||
|
|
@ -410,7 +410,7 @@ gpio-leds-alarm-12 {
|
|||
pinctrl-0 = <&pmx_alarmled_12>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
hdd1-green {
|
||||
led-hdd1-green {
|
||||
label = "synology:alarm";
|
||||
gpios = <&gpio0 21 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
|
@ -424,42 +424,42 @@ &pmx_hddled_23 &pmx_hddled_24 &pmx_hddled_25
|
|||
&pmx_hddled_26 &pmx_hddled_27>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
hdd1-green {
|
||||
led-hdd1-green {
|
||||
label = "synology:green:hdd1";
|
||||
gpios = <&gpio0 20 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
hdd1-amber {
|
||||
led-hdd1-amber {
|
||||
label = "synology:amber:hdd1";
|
||||
gpios = <&gpio0 21 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
hdd2-green {
|
||||
led-hdd2-green {
|
||||
label = "synology:green:hdd2";
|
||||
gpios = <&gpio0 22 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
hdd2-amber {
|
||||
led-hdd2-amber {
|
||||
label = "synology:amber:hdd2";
|
||||
gpios = <&gpio0 23 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
hdd3-green {
|
||||
led-hdd3-green {
|
||||
label = "synology:green:hdd3";
|
||||
gpios = <&gpio0 24 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
hdd3-amber {
|
||||
led-hdd3-amber {
|
||||
label = "synology:amber:hdd3";
|
||||
gpios = <&gpio0 25 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
hdd4-green {
|
||||
led-hdd4-green {
|
||||
label = "synology:green:hdd4";
|
||||
gpios = <&gpio0 26 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
hdd4-amber {
|
||||
led-hdd4-amber {
|
||||
label = "synology:amber:hdd4";
|
||||
gpios = <&gpio0 27 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
|
@ -471,12 +471,12 @@ gpio-leds-hdd-21-1 {
|
|||
pinctrl-0 = <&pmx_hddled_21 &pmx_hddled_23>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
hdd1-green {
|
||||
led-hdd1-green {
|
||||
label = "synology:green:hdd1";
|
||||
gpios = <&gpio0 21 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
hdd1-amber {
|
||||
led-hdd1-amber {
|
||||
label = "synology:amber:hdd1";
|
||||
gpios = <&gpio0 23 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
|
@ -488,22 +488,22 @@ gpio-leds-hdd-21-2 {
|
|||
pinctrl-0 = <&pmx_hddled_21 &pmx_hddled_23 &pmx_hddled_20 &pmx_hddled_22>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
hdd1-green {
|
||||
led-hdd1-green {
|
||||
label = "synology:green:hdd1";
|
||||
gpios = <&gpio0 21 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
hdd1-amber {
|
||||
led-hdd1-amber {
|
||||
label = "synology:amber:hdd1";
|
||||
gpios = <&gpio0 23 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
hdd2-green {
|
||||
led-hdd2-green {
|
||||
label = "synology:green:hdd2";
|
||||
gpios = <&gpio0 20 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
hdd2-amber {
|
||||
led-hdd2-amber {
|
||||
label = "synology:amber:hdd2";
|
||||
gpios = <&gpio0 22 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
|
@ -518,52 +518,52 @@ &pmx_hddled_42 &pmx_hddled_43 &pmx_hddled_44
|
|||
&pmx_hddled_45>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
hdd1-green {
|
||||
led-hdd1-green {
|
||||
label = "synology:green:hdd1";
|
||||
gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
hdd1-amber {
|
||||
led-hdd1-amber {
|
||||
label = "synology:amber:hdd1";
|
||||
gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
hdd2-green {
|
||||
led-hdd2-green {
|
||||
label = "synology:green:hdd2";
|
||||
gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
hdd2-amber {
|
||||
led-hdd2-amber {
|
||||
label = "synology:amber:hdd2";
|
||||
gpios = <&gpio1 7 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
hdd3-green {
|
||||
led-hdd3-green {
|
||||
label = "synology:green:hdd3";
|
||||
gpios = <&gpio1 8 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
hdd3-amber {
|
||||
led-hdd3-amber {
|
||||
label = "synology:amber:hdd3";
|
||||
gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
hdd4-green {
|
||||
led-hdd4-green {
|
||||
label = "synology:green:hdd4";
|
||||
gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
hdd4-amber {
|
||||
led-hdd4-amber {
|
||||
label = "synology:amber:hdd4";
|
||||
gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
hdd5-green {
|
||||
led-hdd5-green {
|
||||
label = "synology:green:hdd5";
|
||||
gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
hdd5-amber {
|
||||
led-hdd5-amber {
|
||||
label = "synology:amber:hdd5";
|
||||
gpios = <&gpio1 13 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
|
@ -575,22 +575,22 @@ gpio-leds-hdd-38 {
|
|||
pinctrl-0 = <&pmx_hddled_38 &pmx_hddled_39 &pmx_hddled_36 &pmx_hddled_37>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
hdd1-green {
|
||||
led-hdd1-green {
|
||||
label = "synology:green:hdd1";
|
||||
gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
hdd1-amber {
|
||||
led-hdd1-amber {
|
||||
label = "synology:amber:hdd1";
|
||||
gpios = <&gpio1 7 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
hdd2-green {
|
||||
led-hdd2-green {
|
||||
label = "synology:green:hdd2";
|
||||
gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
hdd2-amber {
|
||||
led-hdd2-amber {
|
||||
label = "synology:amber:hdd2";
|
||||
gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
|
|
|||
|
|
@ -156,12 +156,10 @@ usb_power: regulator@1 {
|
|||
|
||||
gpio_keys {
|
||||
compatible = "gpio-keys";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
pinctrl-0 = <&pmx_button_power>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
power {
|
||||
button-power {
|
||||
label = "Power Button";
|
||||
linux,code = <KEY_POWER>;
|
||||
gpios = <&gpio1 13 GPIO_ACTIVE_HIGH>;
|
||||
|
|
|
|||
Some files were not shown because too many files have changed in this diff Show more
Loading…
Reference in a new issue