diff --git a/Documentation/usb/chipidea.rst b/Documentation/usb/chipidea.rst
index 68473abe2823..d9920c24eca0 100644
--- a/Documentation/usb/chipidea.rst
+++ b/Documentation/usb/chipidea.rst
@@ -35,10 +35,10 @@ which can show otg fsm variables and some controller registers value::
 1) Power up 2 Freescale i.MX6Q sabre SD boards with gadget class driver loaded
    (e.g. g_mass_storage).
 
-2) Connect 2 boards with usb cable with one end is micro A plug, the other end
+2) Connect 2 boards with usb cable: one end is micro A plug, the other end
    is micro B plug.
 
-   The A-device(with micro A plug inserted) should enumerate B-device.
+   The A-device (with micro A plug inserted) should enumerate B-device.
 
 3) Role switch
 
@@ -54,18 +54,19 @@ which can show otg fsm variables and some controller registers value::
 
 	echo 0 > /sys/bus/platform/devices/ci_hdrc.0/inputs/b_bus_req
 
-   or, by introducing HNP polling, B-Host can know when A-peripheral wish
-   to be host role, so this role switch also can be trigged in A-peripheral
-   side by answering the polling from B-Host, this can be done on A-device::
+   or, by introducing HNP polling, B-Host can know when A-peripheral wishes to
+   be in the host role, so this role switch also can be triggered in
+   A-peripheral side by answering the polling from B-Host. This can be done on
+   A-device::
 
 	echo 1 > /sys/bus/platform/devices/ci_hdrc.0/inputs/a_bus_req
 
    A-device should switch back to host and enumerate B-device.
 
-5) Remove B-device(unplug micro B plug) and insert again in 10 seconds,
+5) Remove B-device (unplug micro B plug) and insert again in 10 seconds;
    A-device should enumerate B-device again.
 
-6) Remove B-device(unplug micro B plug) and insert again after 10 seconds,
+6) Remove B-device (unplug micro B plug) and insert again after 10 seconds;
    A-device should NOT enumerate B-device.
 
    if A-device wants to use bus:
@@ -105,7 +106,7 @@ July 27, 2012 Revision 2.0 version 1.1a"
 2. How to enable USB as system wakeup source
 --------------------------------------------
 Below is the example for how to enable USB as system wakeup source
-at imx6 platform.
+on an imx6 platform.
 
 2.1 Enable core's wakeup::
 
@@ -128,6 +129,6 @@ at imx6 platform.
 	echo enabled > /sys/bus/usb/devices/1-1/power/wakeup
 
 If the system has only one usb port, and you want usb wakeup at this port, you
-can use below script to enable usb wakeup::
+can use the below script to enable usb wakeup::
 
 	for i in $(find /sys -name wakeup | grep usb);do echo enabled > $i;done;
diff --git a/Documentation/usb/gadget-testing.rst b/Documentation/usb/gadget-testing.rst
index 2278c9ffb74a..2fca40443dc9 100644
--- a/Documentation/usb/gadget-testing.rst
+++ b/Documentation/usb/gadget-testing.rst
@@ -813,7 +813,7 @@ the user must provide the following:
 	================== ====================================================
 
 Each frame description contains frame interval specification, and each
-such specification consists of a number of lines with an inverval value
+such specification consists of a number of lines with an interval value
 in each line. The rules stated above are best illustrated with an example::
 
   # mkdir functions/uvc.usb0/control/header/h
diff --git a/Documentation/usb/mass-storage.rst b/Documentation/usb/mass-storage.rst
index f399ec631599..80a601a60931 100644
--- a/Documentation/usb/mass-storage.rst
+++ b/Documentation/usb/mass-storage.rst
@@ -150,7 +150,7 @@ Module parameters
   - bcdDevice     -- USB Device version (BCD) (16 bit integer)
   - iManufacturer -- USB Manufacturer string (string)
   - iProduct      -- USB Product string (string)
-  - iSerialNumber -- SerialNumber string (sting)
+  - iSerialNumber -- SerialNumber string (string)
 
 sysfs entries
 =============