spi: omap2-mcspi: Reorder the wait_for_completion for tx

The commit  d7b4394e[Cleanup the omap2_mcspi_txrx_dma function]
changed the wait_for_completion order. Move the wait so that the
rx doesnot wait for the tx to complete.

Reported-and-tested-by: Sørensen, Stefan <Sorensen@polycom.com>
Signed-off-by: Shubhrajyoti D <shubhrajyoti@ti.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
This commit is contained in:
Shubhrajyoti D 2012-11-06 14:30:19 +05:30 committed by Mark Brown
parent 3d70f8c617
commit e47a682ace

View file

@ -323,18 +323,13 @@ static void omap2_mcspi_tx_dma(struct spi_device *spi,
struct omap2_mcspi *mcspi;
struct omap2_mcspi_dma *mcspi_dma;
unsigned int count;
u8 * rx;
const u8 * tx;
void __iomem *chstat_reg;
struct omap2_mcspi_cs *cs = spi->controller_state;
mcspi = spi_master_get_devdata(spi->master);
mcspi_dma = &mcspi->dma_channels[spi->chip_select];
count = xfer->len;
rx = xfer->rx_buf;
tx = xfer->tx_buf;
chstat_reg = cs->base + OMAP2_MCSPI_CHSTAT0;
if (mcspi_dma->dma_tx) {
struct dma_async_tx_descriptor *tx;
@ -359,19 +354,6 @@ static void omap2_mcspi_tx_dma(struct spi_device *spi,
dma_async_issue_pending(mcspi_dma->dma_tx);
omap2_mcspi_set_dma_req(spi, 0, 1);
wait_for_completion(&mcspi_dma->dma_tx_completion);
dma_unmap_single(mcspi->dev, xfer->tx_dma, count,
DMA_TO_DEVICE);
/* for TX_ONLY mode, be sure all words have shifted out */
if (rx == NULL) {
if (mcspi_wait_for_reg_bit(chstat_reg,
OMAP2_MCSPI_CHSTAT_TXS) < 0)
dev_err(&spi->dev, "TXS timed out\n");
else if (mcspi_wait_for_reg_bit(chstat_reg,
OMAP2_MCSPI_CHSTAT_EOT) < 0)
dev_err(&spi->dev, "EOT timed out\n");
}
}
static unsigned
@ -492,6 +474,7 @@ omap2_mcspi_txrx_dma(struct spi_device *spi, struct spi_transfer *xfer)
struct dma_slave_config cfg;
enum dma_slave_buswidth width;
unsigned es;
void __iomem *chstat_reg;
mcspi = spi_master_get_devdata(spi->master);
mcspi_dma = &mcspi->dma_channels[spi->chip_select];
@ -526,8 +509,24 @@ omap2_mcspi_txrx_dma(struct spi_device *spi, struct spi_transfer *xfer)
omap2_mcspi_tx_dma(spi, xfer, cfg);
if (rx != NULL)
return omap2_mcspi_rx_dma(spi, xfer, cfg, es);
count = omap2_mcspi_rx_dma(spi, xfer, cfg, es);
if (tx != NULL) {
chstat_reg = cs->base + OMAP2_MCSPI_CHSTAT0;
wait_for_completion(&mcspi_dma->dma_tx_completion);
dma_unmap_single(mcspi->dev, xfer->tx_dma, xfer->len,
DMA_TO_DEVICE);
/* for TX_ONLY mode, be sure all words have shifted out */
if (rx == NULL) {
if (mcspi_wait_for_reg_bit(chstat_reg,
OMAP2_MCSPI_CHSTAT_TXS) < 0)
dev_err(&spi->dev, "TXS timed out\n");
else if (mcspi_wait_for_reg_bit(chstat_reg,
OMAP2_MCSPI_CHSTAT_EOT) < 0)
dev_err(&spi->dev, "EOT timed out\n");
}
}
return count;
}