HID: sony: do not rely on hid_output_raw_report

hid_out_raw_report is going to be obsoleted as it is not part of the
unified HID low level transport documentation
(Documentation/hid/hid-transport.txt)

To do so, we need to introduce two new quirks:
* HID_QUIRK_NO_OUTPUT_REPORTS_ON_INTR_EP: this quirks prevents the
  transport driver to use the interrupt channel to send output report
  (and thus force to use HID_REQ_SET_REPORT command)
* HID_QUIRK_SKIP_OUTPUT_REPORT_ID: this one forces usbhid to not
  include the report ID in the buffer it sends to the device through
  HID_REQ_SET_REPORT in case of an output report

This also fixes a regression introduced in commit 3a75b24949
(HID: hidraw: replace hid_output_raw_report() calls by appropriates ones).
The hidraw API was not able to communicate with the PS3 SixAxis
controllers in USB mode.

Reviewed-by: David Herrmann <dh.herrmann@gmail.com>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Tested-by: Antonio Ospite <ao2@ao2.it>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
This commit is contained in:
Benjamin Tissoires 2014-03-08 22:52:42 -05:00 committed by Jiri Kosina
parent 65ab2fc479
commit e534a93522
4 changed files with 24 additions and 48 deletions

View file

@ -29,7 +29,6 @@
#include <linux/hid.h>
#include <linux/module.h>
#include <linux/slab.h>
#include <linux/usb.h>
#include <linux/leds.h>
#include <linux/power_supply.h>
#include <linux/spinlock.h>
@ -1006,45 +1005,6 @@ static int sony_mapping(struct hid_device *hdev, struct hid_input *hi,
return 0;
}
/*
* The Sony Sixaxis does not handle HID Output Reports on the Interrupt EP
* like it should according to usbhid/hid-core.c::usbhid_output_raw_report()
* so we need to override that forcing HID Output Reports on the Control EP.
*
* There is also another issue about HID Output Reports via USB, the Sixaxis
* does not want the report_id as part of the data packet, so we have to
* discard buf[0] when sending the actual control message, even for numbered
* reports, humpf!
*/
static int sixaxis_usb_output_raw_report(struct hid_device *hid, __u8 *buf,
size_t count, unsigned char report_type)
{
struct usb_interface *intf = to_usb_interface(hid->dev.parent);
struct usb_device *dev = interface_to_usbdev(intf);
struct usb_host_interface *interface = intf->cur_altsetting;
int report_id = buf[0];
int ret;
if (report_type == HID_OUTPUT_REPORT) {
/* Don't send the Report ID */
buf++;
count--;
}
ret = usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
HID_REQ_SET_REPORT,
USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE,
((report_type + 1) << 8) | report_id,
interface->desc.bInterfaceNumber, buf, count,
USB_CTRL_SET_TIMEOUT);
/* Count also the Report ID, in case of an Output report. */
if (ret > 0 && report_type == HID_OUTPUT_REPORT)
ret++;
return ret;
}
/*
* Sending HID_REQ_GET_REPORT changes the operation mode of the ps3 controller
* to "operational". Without this, the ps3 controller will not report any
@ -1305,11 +1265,8 @@ static void sixaxis_state_worker(struct work_struct *work)
buf[10] |= sc->led_state[2] << 3;
buf[10] |= sc->led_state[3] << 4;
if (sc->quirks & SIXAXIS_CONTROLLER_USB)
hid_output_raw_report(sc->hdev, buf, sizeof(buf), HID_OUTPUT_REPORT);
else
hid_hw_raw_request(sc->hdev, 0x01, buf, sizeof(buf),
HID_OUTPUT_REPORT, HID_REQ_SET_REPORT);
hid_hw_raw_request(sc->hdev, 0x01, buf, sizeof(buf), HID_OUTPUT_REPORT,
HID_REQ_SET_REPORT);
}
static void dualshock4_state_worker(struct work_struct *work)
@ -1659,7 +1616,18 @@ static int sony_probe(struct hid_device *hdev, const struct hid_device_id *id)
}
if (sc->quirks & SIXAXIS_CONTROLLER_USB) {
hdev->hid_output_raw_report = sixaxis_usb_output_raw_report;
/*
* The Sony Sixaxis does not handle HID Output Reports on the
* Interrupt EP like it could, so we need to force HID Output
* Reports to use HID_REQ_SET_REPORT on the Control EP.
*
* There is also another issue about HID Output Reports via USB,
* the Sixaxis does not want the report_id as part of the data
* packet, so we have to discard buf[0] when sending the actual
* control message, even for numbered reports, humpf!
*/
hdev->quirks |= HID_QUIRK_NO_OUTPUT_REPORTS_ON_INTR_EP;
hdev->quirks |= HID_QUIRK_SKIP_OUTPUT_REPORT_ID;
ret = sixaxis_set_operational_usb(hdev);
sc->worker_initialized = 1;
INIT_WORK(&sc->state_worker, sixaxis_state_worker);

View file

@ -149,7 +149,8 @@ static ssize_t hidraw_send_report(struct file *file, const char __user *buffer,
goto out_free;
}
if (report_type == HID_OUTPUT_REPORT) {
if ((report_type == HID_OUTPUT_REPORT) &&
!(dev->quirks & HID_QUIRK_NO_OUTPUT_REPORTS_ON_INTR_EP)) {
ret = hid_hw_output_report(dev, buf, count);
/*
* compatibility with old implementation of USB-HID and I2C-HID:

View file

@ -894,7 +894,12 @@ static int usbhid_set_raw_report(struct hid_device *hid, unsigned int reportnum,
int ret, skipped_report_id = 0;
/* Byte 0 is the report number. Report data starts at byte 1.*/
buf[0] = reportnum;
if ((rtype == HID_OUTPUT_REPORT) &&
(hid->quirks & HID_QUIRK_SKIP_OUTPUT_REPORT_ID))
buf[0] = 0;
else
buf[0] = reportnum;
if (buf[0] == 0x0) {
/* Don't send the Report ID */
buf++;

View file

@ -287,6 +287,8 @@ struct hid_item {
#define HID_QUIRK_NO_EMPTY_INPUT 0x00000100
#define HID_QUIRK_NO_INIT_INPUT_REPORTS 0x00000200
#define HID_QUIRK_SKIP_OUTPUT_REPORTS 0x00010000
#define HID_QUIRK_SKIP_OUTPUT_REPORT_ID 0x00020000
#define HID_QUIRK_NO_OUTPUT_REPORTS_ON_INTR_EP 0x00040000
#define HID_QUIRK_FULLSPEED_INTERVAL 0x10000000
#define HID_QUIRK_NO_INIT_REPORTS 0x20000000
#define HID_QUIRK_NO_IGNORE 0x40000000