mirrors
/
linux-stable
mirror of https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git
1
0
Fork 0
Code Issues Releases Wiki Activity

ACPI: docs: enumeration: Fix a few typos and wording mistakes 

"sturct" -> "struct"
"similar than with" -> "similar to"
Missing comma, "it" and "to"

Signed-off-by: Jean Delvare <jdelvare@suse.de>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
This commit is contained in:
Jean Delvare 2022-08-26 15:14:57 +02:00 committed by Rafael J. Wysocki
parent b90cb10531
commit e6e8c6c238
1 changed files with 8 additions and 8 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

16
Documentation/firmware-guide/acpi/enumeration.rst
View File

@ -21,7 +21,7 @@ possible we decided to do following:
- Devices behind real busses where there is a connector resource
are represented as struct spi_device or struct i2c_device. Note
that standard UARTs are not busses so there is no struct uart_device,
although some of them may be represented by sturct serdev_device.
although some of them may be represented by struct serdev_device.
As both ACPI and Device Tree represent a tree of devices (and their
resources) this implementation follows the Device Tree way as much as
@ -205,7 +205,7 @@ Here is what the ACPI namespace for a SPI slave might look like::
}
...
The SPI device drivers only need to add ACPI IDs in a similar way than with
The SPI device drivers only need to add ACPI IDs in a similar way to
the platform device drivers. Below is an example where we add ACPI support
to at25 SPI eeprom driver (this is meant for the above ACPI snippet)::
@ -362,7 +362,7 @@ These GPIO numbers are controller relative and path "\\_SB.PCI0.GPI0"
specifies the path to the controller. In order to use these GPIOs in Linux
we need to translate them to the corresponding Linux GPIO descriptors.
There is a standard GPIO API for that and is documented in
There is a standard GPIO API for that and it is documented in
Documentation/admin-guide/gpio/.
In the above example we can get the corresponding two GPIO descriptors with
@ -538,8 +538,8 @@ information.
PCI hierarchy representation
============================
Sometimes could be useful to enumerate a PCI device, knowing its position on the
PCI bus.
Sometimes it could be useful to enumerate a PCI device, knowing its position on
the PCI bus.
For example, some systems use PCI devices soldered directly on the mother board,
in a fixed position (ethernet, Wi-Fi, serial ports, etc.). In this conditions it
@ -550,7 +550,7 @@ To identify a PCI device, a complete hierarchical description is required, from
the chipset root port to the final device, through all the intermediate
bridges/switches of the board.
For example, let us assume to have a system with a PCIe serial port, an
For example, let's assume we have a system with a PCIe serial port, an
Exar XR17V3521, soldered on the main board. This UART chip also includes
16 GPIOs and we want to add the property ``gpio-line-names`` [1] to these pins.
In this case, the ``lspci`` output for this component is::
@ -593,8 +593,8 @@ of the chipset bridge (also called "root port") with address::
Bus: 0 - Device: 14 - Function: 1
To find this information is necessary disassemble the BIOS ACPI tables, in
particular the DSDT (see also [2])::
To find this information, it is necessary to disassemble the BIOS ACPI tables,
in particular the DSDT (see also [2])::
mkdir ~/tables/
cd ~/tables/