[PATCH] sis190: basic sis191 support

The sis191 is the gigabit brother of the sis190. SiS's driver suggests
that the register set is backward compatible: this should hopefully
give a basic driver.

The device should allow the usual features from a modern ethernet
adapter (802.1q, SG, Jumbo frames, TSO, checksum offload). So far
the relevant register layout is not documented. SiS's driver does
not provide these features either (at least not for Linux).

Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
This commit is contained in:
Francois Romieu 2005-09-03 00:57:51 +02:00 committed by Jeff Garzik
parent c3d6f1f24c
commit e797637f4c
2 changed files with 8 additions and 5 deletions

View File

@ -1924,12 +1924,15 @@ config R8169_VLAN
If in doubt, say Y.
config SIS190
tristate "SiS190 gigabit ethernet support"
tristate "SiS190/SiS191 gigabit ethernet support"
depends on PCI
select CRC32
select MII
---help---
Say Y here if you have a SiS 190 PCI Gigabit Ethernet adapter.
Say Y here if you have a SiS 190 PCI Fast Ethernet adapter or
a SiS 191 PCI Gigabit Ethernet adapter. Both are expected to
appear in lan on motherboard designs which are based on SiS 965
and SiS 966 south bridge.
To compile this driver as a module, choose M here: the module
will be called sis190. This is recommended.

View File

@ -331,14 +331,14 @@ static struct mii_chip_info {
const static struct {
const char *name;
u8 version; /* depend on docs */
u32 RxConfigMask; /* clear the bits supported by this chip */
} sis_chip_info[] = {
{ DRV_NAME, 0x00, 0xff7e1880, },
{ "SiS 190 PCI Fast Ethernet adapter" },
{ "SiS 191 PCI Gigabit Ethernet adapter" },
};
static struct pci_device_id sis190_pci_tbl[] __devinitdata = {
{ PCI_DEVICE(PCI_VENDOR_ID_SI, 0x0190), 0, 0, 0 },
{ PCI_DEVICE(PCI_VENDOR_ID_SI, 0x0191), 0, 0, 1 },
{ 0, },
};