hwmon: Add Maxim MAX6620 hardware monitoring driver
Add hardware monitoring driver for Maxim MAX6620 Fan controller Originally-from: L. Grunenberg <contact@lgrunenberg.de> Originally-from: Cumulus Networks <support@cumulusnetworks.com> Originally-from: Shuotian Cheng <shuche@microsoft.com> Signed-off-by: Arun Saravanan Balachandran <Arun_Saravanan_Balac@dell.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
This commit is contained in:
Arun Saravanan Balachandran
Guenter Roeck
parent
d73287eed7
commit
e8ac01e5db
|
|
@ -130,6 +130,7 @@ Hardware Monitoring Kernel Drivers
|
|||
max31785
|
||||
max31790
|
||||
max34440
|
||||
max6620
|
||||
max6639
|
||||
max6642
|
||||
max6650
|
||||
|
|
|
|||
|
|
@ -0,0 +1,46 @@
|
|||
.. SPDX-License-Identifier: GPL-2.0-or-later
|
||||
|
||||
Kernel driver max6620
|
||||
=====================
|
||||
|
||||
Supported chips:
|
||||
|
||||
Maxim MAX6620
|
||||
|
||||
Prefix: 'max6620'
|
||||
|
||||
Addresses scanned: none
|
||||
|
||||
Datasheet: http://pdfserv.maxim-ic.com/en/ds/MAX6620.pdf
|
||||
|
||||
Authors:
|
||||
- L\. Grunenberg <contact@lgrunenberg.de>
|
||||
- Cumulus Networks <support@cumulusnetworks.com>
|
||||
- Shuotian Cheng <shuche@microsoft.com>
|
||||
- Arun Saravanan Balachandran <Arun_Saravanan_Balac@dell.com>
|
||||
|
||||
Description
|
||||
-----------
|
||||
|
||||
This driver implements support for Maxim MAX6620 fan controller.
|
||||
|
||||
The driver configures the fan controller in RPM mode. To give the readings more
|
||||
range or accuracy, the desired value can be set by a programmable register
|
||||
(1, 2, 4, 8, 16 or 32). Set higher values for larger speeds.
|
||||
|
||||
The driver provides the following sensor access in sysfs:
|
||||
|
||||
================ ======= =====================================================
|
||||
fan[1-4]_alarm ro Fan alarm.
|
||||
fan[1-4]_div rw Sets the nominal RPM range of the fan. Valid values
|
||||
are 1, 2, 4, 8, 16 and 32.
|
||||
fan[1-4]_input ro Fan speed in RPM.
|
||||
fan[1-4]_target rw Desired fan speed in RPM.
|
||||
================ ======= =====================================================
|
||||
|
||||
Usage notes
|
||||
-----------
|
||||
|
||||
This driver does not auto-detect devices. You will have to instantiate the
|
||||
devices explicitly. Please see Documentation/i2c/instantiating-devices.rst for
|
||||
details.
|
||||
|
|
@ -1032,6 +1032,16 @@ config SENSORS_MAX31730
|
|||
This driver can also be built as a module. If so, the module
|
||||
will be called max31730.
|
||||
|
||||
config SENSORS_MAX6620
|
||||
tristate "Maxim MAX6620 fan controller"
|
||||
depends on I2C
|
||||
help
|
||||
If you say yes here you get support for the MAX6620
|
||||
fan controller.
|
||||
|
||||
This driver can also be built as a module. If so, the module
|
||||
will be called max6620.
|
||||
|
||||
config SENSORS_MAX6621
|
||||
tristate "Maxim MAX6621 sensor chip"
|
||||
depends on I2C
|
||||
|
|
|
|||
|
|
@ -135,6 +135,7 @@ obj-$(CONFIG_SENSORS_MAX1668) += max1668.o
|
|||
obj-$(CONFIG_SENSORS_MAX197) += max197.o
|
||||
obj-$(CONFIG_SENSORS_MAX31722) += max31722.o
|
||||
obj-$(CONFIG_SENSORS_MAX31730) += max31730.o
|
||||
obj-$(CONFIG_SENSORS_MAX6620) += max6620.o
|
||||
obj-$(CONFIG_SENSORS_MAX6621) += max6621.o
|
||||
obj-$(CONFIG_SENSORS_MAX6639) += max6639.o
|
||||
obj-$(CONFIG_SENSORS_MAX6642) += max6642.o
|
||||
|
|
|
|||
|
|
@ -0,0 +1,514 @@
|
|||
// SPDX-License-Identifier: GPL-2.0-or-later
|
||||
/*
|
||||
* Hardware monitoring driver for Maxim MAX6620
|
||||
*
|
||||
* Originally from L. Grunenberg.
|
||||
* (C) 2012 by L. Grunenberg <contact@lgrunenberg.de>
|
||||
*
|
||||
* Copyright (c) 2021 Dell Inc. or its subsidiaries. All Rights Reserved.
|
||||
*
|
||||
* based on code written by :
|
||||
* 2007 by Hans J. Koch <hjk@hansjkoch.de>
|
||||
* John Morris <john.morris@spirentcom.com>
|
||||
* Copyright (c) 2003 Spirent Communications
|
||||
* and Claus Gindhart <claus.gindhart@kontron.com>
|
||||
*
|
||||
* This module has only been tested with the MAX6620 chip.
|
||||
*
|
||||
* The datasheet was last seen at:
|
||||
*
|
||||
* http://pdfserv.maxim-ic.com/en/ds/MAX6620.pdf
|
||||
*
|
||||
*/
|
||||
|
||||
#include <linux/bits.h>
|
||||
#include <linux/err.h>
|
||||
#include <linux/hwmon.h>
|
||||
#include <linux/i2c.h>
|
||||
#include <linux/init.h>
|
||||
#include <linux/jiffies.h>
|
||||
#include <linux/module.h>
|
||||
#include <linux/slab.h>
|
||||
|
||||
/*
|
||||
* MAX 6620 registers
|
||||
*/
|
||||
|
||||
#define MAX6620_REG_CONFIG 0x00
|
||||
#define MAX6620_REG_FAULT 0x01
|
||||
#define MAX6620_REG_CONF_FAN0 0x02
|
||||
#define MAX6620_REG_CONF_FAN1 0x03
|
||||
#define MAX6620_REG_CONF_FAN2 0x04
|
||||
#define MAX6620_REG_CONF_FAN3 0x05
|
||||
#define MAX6620_REG_DYN_FAN0 0x06
|
||||
#define MAX6620_REG_DYN_FAN1 0x07
|
||||
#define MAX6620_REG_DYN_FAN2 0x08
|
||||
#define MAX6620_REG_DYN_FAN3 0x09
|
||||
#define MAX6620_REG_TACH0 0x10
|
||||
#define MAX6620_REG_TACH1 0x12
|
||||
#define MAX6620_REG_TACH2 0x14
|
||||
#define MAX6620_REG_TACH3 0x16
|
||||
#define MAX6620_REG_VOLT0 0x18
|
||||
#define MAX6620_REG_VOLT1 0x1A
|
||||
#define MAX6620_REG_VOLT2 0x1C
|
||||
#define MAX6620_REG_VOLT3 0x1E
|
||||
#define MAX6620_REG_TAR0 0x20
|
||||
#define MAX6620_REG_TAR1 0x22
|
||||
#define MAX6620_REG_TAR2 0x24
|
||||
#define MAX6620_REG_TAR3 0x26
|
||||
#define MAX6620_REG_DAC0 0x28
|
||||
#define MAX6620_REG_DAC1 0x2A
|
||||
#define MAX6620_REG_DAC2 0x2C
|
||||
#define MAX6620_REG_DAC3 0x2E
|
||||
|
||||
/*
|
||||
* Config register bits
|
||||
*/
|
||||
|
||||
#define MAX6620_CFG_RUN BIT(7)
|
||||
#define MAX6620_CFG_POR BIT(6)
|
||||
#define MAX6620_CFG_TIMEOUT BIT(5)
|
||||
#define MAX6620_CFG_FULLFAN BIT(4)
|
||||
#define MAX6620_CFG_OSC BIT(3)
|
||||
#define MAX6620_CFG_WD_MASK (BIT(2) | BIT(1))
|
||||
#define MAX6620_CFG_WD_2 BIT(1)
|
||||
#define MAX6620_CFG_WD_6 BIT(2)
|
||||
#define MAX6620_CFG_WD10 (BIT(2) | BIT(1))
|
||||
#define MAX6620_CFG_WD BIT(0)
|
||||
|
||||
/*
|
||||
* Failure status register bits
|
||||
*/
|
||||
|
||||
#define MAX6620_FAIL_TACH0 BIT(4)
|
||||
#define MAX6620_FAIL_TACH1 BIT(5)
|
||||
#define MAX6620_FAIL_TACH2 BIT(6)
|
||||
#define MAX6620_FAIL_TACH3 BIT(7)
|
||||
#define MAX6620_FAIL_MASK0 BIT(0)
|
||||
#define MAX6620_FAIL_MASK1 BIT(1)
|
||||
#define MAX6620_FAIL_MASK2 BIT(2)
|
||||
#define MAX6620_FAIL_MASK3 BIT(3)
|
||||
|
||||
#define MAX6620_CLOCK_FREQ 8192 /* Clock frequency in Hz */
|
||||
#define MAX6620_PULSE_PER_REV 2 /* Tachometer pulses per revolution */
|
||||
|
||||
/* Minimum and maximum values of the FAN-RPM */
|
||||
#define FAN_RPM_MIN 240
|
||||
#define FAN_RPM_MAX 30000
|
||||
|
||||
static const u8 config_reg[] = {
|
||||
MAX6620_REG_CONF_FAN0,
|
||||
MAX6620_REG_CONF_FAN1,
|
||||
MAX6620_REG_CONF_FAN2,
|
||||
MAX6620_REG_CONF_FAN3,
|
||||
};
|
||||
|
||||
static const u8 dyn_reg[] = {
|
||||
MAX6620_REG_DYN_FAN0,
|
||||
MAX6620_REG_DYN_FAN1,
|
||||
MAX6620_REG_DYN_FAN2,
|
||||
MAX6620_REG_DYN_FAN3,
|
||||
};
|
||||
|
||||
static const u8 tach_reg[] = {
|
||||
MAX6620_REG_TACH0,
|
||||
MAX6620_REG_TACH1,
|
||||
MAX6620_REG_TACH2,
|
||||
MAX6620_REG_TACH3,
|
||||
};
|
||||
|
||||
static const u8 target_reg[] = {
|
||||
MAX6620_REG_TAR0,
|
||||
MAX6620_REG_TAR1,
|
||||
MAX6620_REG_TAR2,
|
||||
MAX6620_REG_TAR3,
|
||||
};
|
||||
|
||||
/*
|
||||
* Client data (each client gets its own)
|
||||
*/
|
||||
|
||||
struct max6620_data {
|
||||
struct i2c_client *client;
|
||||
struct mutex update_lock;
|
||||
bool valid; /* false until following fields are valid */
|
||||
unsigned long last_updated; /* in jiffies */
|
||||
|
||||
/* register values */
|
||||
u8 fancfg[4];
|
||||
u8 fandyn[4];
|
||||
u8 fault;
|
||||
u16 tach[4];
|
||||
u16 target[4];
|
||||
};
|
||||
|
||||
static u8 max6620_fan_div_from_reg(u8 val)
|
||||
{
|
||||
return BIT((val & 0xE0) >> 5);
|
||||
}
|
||||
|
||||
static u16 max6620_fan_rpm_to_tach(u8 div, int rpm)
|
||||
{
|
||||
return (60 * div * MAX6620_CLOCK_FREQ) / (rpm * MAX6620_PULSE_PER_REV);
|
||||
}
|
||||
|
||||
static int max6620_fan_tach_to_rpm(u8 div, u16 tach)
|
||||
{
|
||||
return (60 * div * MAX6620_CLOCK_FREQ) / (tach * MAX6620_PULSE_PER_REV);
|
||||
}
|
||||
|
||||
static int max6620_update_device(struct device *dev)
|
||||
{
|
||||
struct max6620_data *data = dev_get_drvdata(dev);
|
||||
struct i2c_client *client = data->client;
|
||||
int i;
|
||||
int ret = 0;
|
||||
|
||||
mutex_lock(&data->update_lock);
|
||||
|
||||
if (time_after(jiffies, data->last_updated + HZ) || !data->valid) {
|
||||
for (i = 0; i < 4; i++) {
|
||||
ret = i2c_smbus_read_byte_data(client, config_reg[i]);
|
||||
if (ret < 0)
|
||||
goto error;
|
||||
data->fancfg[i] = ret;
|
||||
|
||||
ret = i2c_smbus_read_byte_data(client, dyn_reg[i]);
|
||||
if (ret < 0)
|
||||
goto error;
|
||||
data->fandyn[i] = ret;
|
||||
|
||||
ret = i2c_smbus_read_byte_data(client, tach_reg[i]);
|
||||
if (ret < 0)
|
||||
goto error;
|
||||
data->tach[i] = (ret << 3) & 0x7f8;
|
||||
ret = i2c_smbus_read_byte_data(client, tach_reg[i] + 1);
|
||||
if (ret < 0)
|
||||
goto error;
|
||||
data->tach[i] |= (ret >> 5) & 0x7;
|
||||
|
||||
ret = i2c_smbus_read_byte_data(client, target_reg[i]);
|
||||
if (ret < 0)
|
||||
goto error;
|
||||
data->target[i] = (ret << 3) & 0x7f8;
|
||||
ret = i2c_smbus_read_byte_data(client, target_reg[i] + 1);
|
||||
if (ret < 0)
|
||||
goto error;
|
||||
data->target[i] |= (ret >> 5) & 0x7;
|
||||
}
|
||||
|
||||
/*
|
||||
* Alarms are cleared on read in case the condition that
|
||||
* caused the alarm is removed. Keep the value latched here
|
||||
* for providing the register through different alarm files.
|
||||
*/
|
||||
ret = i2c_smbus_read_byte_data(client, MAX6620_REG_FAULT);
|
||||
if (ret < 0)
|
||||
goto error;
|
||||
data->fault |= (ret >> 4) & (ret & 0x0F);
|
||||
|
||||
data->last_updated = jiffies;
|
||||
data->valid = true;
|
||||
}
|
||||
|
||||
error:
|
||||
mutex_unlock(&data->update_lock);
|
||||
return ret;
|
||||
}
|
||||
|
||||
static umode_t
|
||||
max6620_is_visible(const void *data, enum hwmon_sensor_types type, u32 attr,
|
||||
int channel)
|
||||
{
|
||||
switch (type) {
|
||||
case hwmon_fan:
|
||||
switch (attr) {
|
||||
case hwmon_fan_alarm:
|
||||
case hwmon_fan_input:
|
||||
return 0444;
|
||||
case hwmon_fan_div:
|
||||
case hwmon_fan_target:
|
||||
return 0644;
|
||||
default:
|
||||
break;
|
||||
}
|
||||
break;
|
||||
default:
|
||||
break;
|
||||
}
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int
|
||||
max6620_read(struct device *dev, enum hwmon_sensor_types type, u32 attr,
|
||||
int channel, long *val)
|
||||
{
|
||||
struct max6620_data *data;
|
||||
struct i2c_client *client;
|
||||
int ret;
|
||||
u8 div;
|
||||
u8 val1;
|
||||
u8 val2;
|
||||
|
||||
ret = max6620_update_device(dev);
|
||||
if (ret < 0)
|
||||
return ret;
|
||||
data = dev_get_drvdata(dev);
|
||||
client = data->client;
|
||||
|
||||
switch (type) {
|
||||
case hwmon_fan:
|
||||
switch (attr) {
|
||||
case hwmon_fan_alarm:
|
||||
mutex_lock(&data->update_lock);
|
||||
*val = !!(data->fault & BIT(channel));
|
||||
|
||||
/* Setting TACH count to re-enable fan fault detection */
|
||||
if (*val == 1) {
|
||||
val1 = (data->target[channel] >> 3) & 0xff;
|
||||
val2 = (data->target[channel] << 5) & 0xe0;
|
||||
ret = i2c_smbus_write_byte_data(client,
|
||||
target_reg[channel], val1);
|
||||
if (ret < 0) {
|
||||
mutex_unlock(&data->update_lock);
|
||||
return ret;
|
||||
}
|
||||
ret = i2c_smbus_write_byte_data(client,
|
||||
target_reg[channel] + 1, val2);
|
||||
if (ret < 0) {
|
||||
mutex_unlock(&data->update_lock);
|
||||
return ret;
|
||||
}
|
||||
|
||||
data->fault &= ~BIT(channel);
|
||||
}
|
||||
mutex_unlock(&data->update_lock);
|
||||
|
||||
break;
|
||||
case hwmon_fan_div:
|
||||
*val = max6620_fan_div_from_reg(data->fandyn[channel]);
|
||||
break;
|
||||
case hwmon_fan_input:
|
||||
if (data->tach[channel] == 0) {
|
||||
*val = 0;
|
||||
} else {
|
||||
div = max6620_fan_div_from_reg(data->fandyn[channel]);
|
||||
*val = max6620_fan_tach_to_rpm(div, data->tach[channel]);
|
||||
}
|
||||
break;
|
||||
case hwmon_fan_target:
|
||||
if (data->target[channel] == 0) {
|
||||
*val = 0;
|
||||
} else {
|
||||
div = max6620_fan_div_from_reg(data->fandyn[channel]);
|
||||
*val = max6620_fan_tach_to_rpm(div, data->target[channel]);
|
||||
}
|
||||
break;
|
||||
default:
|
||||
return -EOPNOTSUPP;
|
||||
}
|
||||
break;
|
||||
|
||||
default:
|
||||
return -EOPNOTSUPP;
|
||||
}
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int
|
||||
max6620_write(struct device *dev, enum hwmon_sensor_types type, u32 attr,
|
||||
int channel, long val)
|
||||
{
|
||||
struct max6620_data *data;
|
||||
struct i2c_client *client;
|
||||
int ret;
|
||||
u8 div;
|
||||
u16 tach;
|
||||
u8 val1;
|
||||
u8 val2;
|
||||
|
||||
ret = max6620_update_device(dev);
|
||||
if (ret < 0)
|
||||
return ret;
|
||||
data = dev_get_drvdata(dev);
|
||||
client = data->client;
|
||||
mutex_lock(&data->update_lock);
|
||||
|
||||
switch (type) {
|
||||
case hwmon_fan:
|
||||
switch (attr) {
|
||||
case hwmon_fan_div:
|
||||
switch (val) {
|
||||
case 1:
|
||||
div = 0;
|
||||
break;
|
||||
case 2:
|
||||
div = 1;
|
||||
break;
|
||||
case 4:
|
||||
div = 2;
|
||||
break;
|
||||
case 8:
|
||||
div = 3;
|
||||
break;
|
||||
case 16:
|
||||
div = 4;
|
||||
break;
|
||||
case 32:
|
||||
div = 5;
|
||||
break;
|
||||
default:
|
||||
ret = -EINVAL;
|
||||
goto error;
|
||||
}
|
||||
data->fandyn[channel] &= 0x1F;
|
||||
data->fandyn[channel] |= div << 5;
|
||||
ret = i2c_smbus_write_byte_data(client, dyn_reg[channel],
|
||||
data->fandyn[channel]);
|
||||
break;
|
||||
case hwmon_fan_target:
|
||||
val = clamp_val(val, FAN_RPM_MIN, FAN_RPM_MAX);
|
||||
div = max6620_fan_div_from_reg(data->fandyn[channel]);
|
||||
tach = max6620_fan_rpm_to_tach(div, val);
|
||||
val1 = (tach >> 3) & 0xff;
|
||||
val2 = (tach << 5) & 0xe0;
|
||||
ret = i2c_smbus_write_byte_data(client, target_reg[channel], val1);
|
||||
if (ret < 0)
|
||||
break;
|
||||
ret = i2c_smbus_write_byte_data(client, target_reg[channel] + 1, val2);
|
||||
if (ret < 0)
|
||||
break;
|
||||
|
||||
/* Setting TACH count re-enables fan fault detection */
|
||||
data->fault &= ~BIT(channel);
|
||||
|
||||
break;
|
||||
default:
|
||||
ret = -EOPNOTSUPP;
|
||||
break;
|
||||
}
|
||||
break;
|
||||
|
||||
default:
|
||||
ret = -EOPNOTSUPP;
|
||||
break;
|
||||
}
|
||||
|
||||
error:
|
||||
mutex_unlock(&data->update_lock);
|
||||
return ret;
|
||||
}
|
||||
|
||||
static const struct hwmon_channel_info *max6620_info[] = {
|
||||
HWMON_CHANNEL_INFO(fan,
|
||||
HWMON_F_INPUT | HWMON_F_DIV | HWMON_F_TARGET | HWMON_F_ALARM,
|
||||
HWMON_F_INPUT | HWMON_F_DIV | HWMON_F_TARGET | HWMON_F_ALARM,
|
||||
HWMON_F_INPUT | HWMON_F_DIV | HWMON_F_TARGET | HWMON_F_ALARM,
|
||||
HWMON_F_INPUT | HWMON_F_DIV | HWMON_F_TARGET | HWMON_F_ALARM),
|
||||
NULL
|
||||
};
|
||||
|
||||
static const struct hwmon_ops max6620_hwmon_ops = {
|
||||
.read = max6620_read,
|
||||
.write = max6620_write,
|
||||
.is_visible = max6620_is_visible,
|
||||
};
|
||||
|
||||
static const struct hwmon_chip_info max6620_chip_info = {
|
||||
.ops = &max6620_hwmon_ops,
|
||||
.info = max6620_info,
|
||||
};
|
||||
|
||||
static int max6620_init_client(struct max6620_data *data)
|
||||
{
|
||||
struct i2c_client *client = data->client;
|
||||
int config;
|
||||
int err;
|
||||
int i;
|
||||
int reg;
|
||||
|
||||
config = i2c_smbus_read_byte_data(client, MAX6620_REG_CONFIG);
|
||||
if (config < 0) {
|
||||
dev_err(&client->dev, "Error reading config, aborting.\n");
|
||||
return config;
|
||||
}
|
||||
|
||||
/*
|
||||
* Set bit 4, disable other fans from going full speed on a fail
|
||||
* failure.
|
||||
*/
|
||||
err = i2c_smbus_write_byte_data(client, MAX6620_REG_CONFIG, config | 0x10);
|
||||
if (err < 0) {
|
||||
dev_err(&client->dev, "Config write error, aborting.\n");
|
||||
return err;
|
||||
}
|
||||
|
||||
for (i = 0; i < 4; i++) {
|
||||
reg = i2c_smbus_read_byte_data(client, config_reg[i]);
|
||||
if (reg < 0)
|
||||
return reg;
|
||||
data->fancfg[i] = reg;
|
||||
|
||||
/* Enable RPM mode */
|
||||
data->fancfg[i] |= 0xa8;
|
||||
err = i2c_smbus_write_byte_data(client, config_reg[i], data->fancfg[i]);
|
||||
if (err < 0)
|
||||
return err;
|
||||
|
||||
/* 2 counts (001) and Rate change 100 (0.125 secs) */
|
||||
data->fandyn[i] = 0x30;
|
||||
err = i2c_smbus_write_byte_data(client, dyn_reg[i], data->fandyn[i]);
|
||||
if (err < 0)
|
||||
return err;
|
||||
}
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int max6620_probe(struct i2c_client *client)
|
||||
{
|
||||
struct device *dev = &client->dev;
|
||||
struct max6620_data *data;
|
||||
struct device *hwmon_dev;
|
||||
int err;
|
||||
|
||||
data = devm_kzalloc(dev, sizeof(struct max6620_data), GFP_KERNEL);
|
||||
if (!data)
|
||||
return -ENOMEM;
|
||||
|
||||
data->client = client;
|
||||
mutex_init(&data->update_lock);
|
||||
|
||||
err = max6620_init_client(data);
|
||||
if (err)
|
||||
return err;
|
||||
|
||||
hwmon_dev = devm_hwmon_device_register_with_info(dev, client->name,
|
||||
data,
|
||||
&max6620_chip_info,
|
||||
NULL);
|
||||
|
||||
return PTR_ERR_OR_ZERO(hwmon_dev);
|
||||
}
|
||||
|
||||
static const struct i2c_device_id max6620_id[] = {
|
||||
{ "max6620", 0 },
|
||||
{ }
|
||||
};
|
||||
MODULE_DEVICE_TABLE(i2c, max6620_id);
|
||||
|
||||
static struct i2c_driver max6620_driver = {
|
||||
.class = I2C_CLASS_HWMON,
|
||||
.driver = {
|
||||
.name = "max6620",
|
||||
},
|
||||
.probe_new = max6620_probe,
|
||||
.id_table = max6620_id,
|
||||
};
|
||||
|
||||
module_i2c_driver(max6620_driver);
|
||||
|
||||
MODULE_AUTHOR("Lucas Grunenberg");
|
||||
MODULE_DESCRIPTION("MAX6620 sensor driver");
|
||||
MODULE_LICENSE("GPL");
|
||||
Loading…
Reference in New Issue