From ea1ccdc605f27066d3b1d28da2d503d354387945 Mon Sep 17 00:00:00 2001 From: Paul Cercueil Date: Sun, 4 Jun 2023 16:56:34 +0200 Subject: [PATCH] MIPS: DTS: CI20: Fix regulators The regulators don't have any "reg" property, and therefore shouldn't use an unit address in their node names. They also don't need to specify the GPIO_ACTIVE_LOW flag, which will be ignored anyway, as they are active-high. Signed-off-by: Paul Cercueil Signed-off-by: Thomas Bogendoerfer --- arch/mips/boot/dts/ingenic/ci20.dts | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) diff --git a/arch/mips/boot/dts/ingenic/ci20.dts b/arch/mips/boot/dts/ingenic/ci20.dts index 239c4537484d..e76953dce2e7 100644 --- a/arch/mips/boot/dts/ingenic/ci20.dts +++ b/arch/mips/boot/dts/ingenic/ci20.dts @@ -67,14 +67,14 @@ led-3 { }; }; - eth0_power: fixedregulator@0 { + eth0_power: fixedregulator-0 { compatible = "regulator-fixed"; regulator-name = "eth0_power"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; - gpio = <&gpb 25 GPIO_ACTIVE_LOW>; + gpio = <&gpb 25 0>; enable-active-high; }; @@ -97,23 +97,23 @@ ir: ir { gpios = <&gpe 3 GPIO_ACTIVE_LOW>; }; - wlan0_power: fixedregulator@1 { + wlan0_power: fixedregulator-1 { compatible = "regulator-fixed"; regulator-name = "wlan0_power"; - gpio = <&gpb 19 GPIO_ACTIVE_LOW>; + gpio = <&gpb 19 0>; enable-active-high; }; - otg_power: fixedregulator@2 { + otg_power: fixedregulator-2 { compatible = "regulator-fixed"; regulator-name = "otg_power"; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; - gpio = <&gpf 15 GPIO_ACTIVE_LOW>; + gpio = <&gpf 15 0>; enable-active-high; }; };