mirrors/linux-stable
1
0
Fork 0
mirror of https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git synced 2024-10-28 07:13:34 +00:00
Code Issues Releases Wiki Activity

i2c-cht-wc: Workaround CHT GPIO controller IRQ issues

Browse source 
The Cherry Trail Whiskey Cove PMIC's IRQ line is attached to one of
the GPIOs of the Cherry Trail SoC. The CHT GPIO controller sometimes
fails to deliver IRQs (seen when there is an IRQ storm on another pin).

This commit works around this by reducing the long timeout which was
a poor attempt to workaround this from 3s to 30ms and after that
manually checking the status register for transfer completion by
calling the threaded IRQ handler directly.

This is safe todo as the entire threaded IRQ handler is protected
by a mutex.

Note 30ms should be more then long enough, at 100KHz any smbus single
byte transaction should be finished in 4ms.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
This commit is contained in:
Hans de Goede 2017-08-14 22:17:26 +02:00 committed by Wolfram Sang
parent 8de60c636e
commit ed1094012a
1 changed files with 10 additions and 4 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

14
drivers/i2c/busses/i2c-cht-wc.c
View file

@ -158,10 +158,16 @@ static int cht_wc_i2c_adap_smbus_xfer(struct i2c_adapter *_adap, u16 addr,
if (ret)
return ret;
/* 3 second timeout, during cable plug the PMIC responds quite slow */
ret = wait_event_timeout(adap->wait, adap->done, 3 * HZ);
if (ret == 0)
return -ETIMEDOUT;
ret = wait_event_timeout(adap->wait, adap->done, msecs_to_jiffies(30));
if (ret == 0) {
/*
* The CHT GPIO controller serializes all IRQs, sometimes
* causing significant delays, check status manually.
*/
cht_wc_i2c_adap_thread_handler(0, adap);
if (!adap->done)
return -ETIMEDOUT;
}
ret = 0;
mutex_lock(&adap->adap_lock);