mirrors
/
linux-stable
mirror of https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git
1
0
Fork 0
Code Issues Releases Wiki Activity

ARM: DT updates for 5.18 

After a somewhat quiet 5.17 release, the size of the DT changes
 is a bit larger again. There are nine new SoC that get added,
 all of them related to existing platforms:
 
  - Airoha (formerly Mediatek/EcoNet) EN7523 networking SoC and EVB
 
  - Mediatek mt6582 tablet platform with the Prestigio PMT5008 3G tablet
 
  - Microchip Lan966 networking SoC and it evaluation board
 
  - Qualcomm Snapdragon 625/632 midrange phone SoCs, with the
    LG Nexus 5X and Fairphone FP3 phones
 
  - Renesas RZ/G2LC and RZ/V2L general-purpose embedded SoCs,
    along with their evaluation boards
 
  - Samsung Exynos 850 phone SoC and reference board
 
  - Samsung Exynos7885 with the Samsung Galaxy A8 (2018) phone
 
  - Tesla FSD (Fully Self-Driving), an automotive SoC losely derived
    from the Samsung Exynos family.
 
  - TI K3/AM62 SoC and reference board
 
 Support for additional functionality in existing dts files is added all
 over the place: Samsung, Renesas, Mstar, wpcm450, OMAP, AT91, Allwinner,
 i.MX, Tegra, Aspeed, Oxnas, Qualcomm, Mediatek, and Broadcom.
 
 Samsung has a rework for its pinctrl schema that is a bit tricky and
 requires driver changes to be included here.
 
 A few more platforms only have smaller cleanups and DT Schema fixes,
 this includes SoCFPGA, ux500, ixp4xx, STi, Xilinx Zynq, LG, and Juno.
 
 The new machines are really too many to list, but I'll do it anyway:
 
  Allwinner:
    - A20-Marsboard development board
 
  Amlogic
   - Amediatek X96-AIR (Amlogic S905X3)
   - CYX A95XF3-AIR (Amlogic S905X3)
   - Haochuangy H96-Max (Amlogic S905X3)
   - Amlogic AQ222 (Amlogic S4)
   - OSMC Vero 4K+ (Amlogic S905D)
 
  Arm Juno
   - Separate DT depending on SCMI firmware version
 
  Aspeed:
   - Quanta S6Q BMC (AST2600)
   - ASRock ROMED8HM3 (AST2500)
 
  Broadcom:
   - Raspberry Pi Zero 2 W
 
  Marvell MVEBU/Armada:
   - Ctera C200 V1 NAS (kirkwood)
   - Ctera C200 V2 NAS (armada-370)
 
  Mstar
   - DongShanPiOne, a low-end embedded board
   - Miyoo Mini handheld game console
 
  NXP i.MX:
   - Numerous i.MX8M Mini based boards in even more variations, but
     none based on other SoCs this time:
     Protonic PRT8MM, emCON-MX8M Mini, Toradex Verdin, and
     Gateworks GW7903
 
  Qualcomm:
   - Google Herobrine R1 Chromebook platform (Snapdragon 7c Gen 3)
   - SHIFT6mq phone (Snapdragon 845)
   - Samsung Galaxy Book2 (Snapdragon 850)
   - Snapdragon 8 Gen 1 Hardware Development Kit
 
  TI OMAP:
   - SanCloud BeagleBone Enhanced WiFi
 
  Rockchip:
   - Pine64 PineNote ereader tablet (rk356x)
   - Bananapi-R2-Pro (rk356x)
 
  STM32:
   - emtrion emSBS-Argon embedded board (stm32mp157c)
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEo6/YBQwIrVS28WGKmmx57+YAGNkFAmI7SvoACgkQmmx57+YA
 GNkVrBAAkOb03vIWYdUwflcqjEXsV+Wop2innJE2KGuhXdwleTM9skRghBt2Ojpg
 5doTbIUJZuUwPsJDRXe7tTt6ZJclr6XvO8/Us8iQ6OIS5V+EHVJEKWVGrgoZu/eU
 LqZqbAZK43csnOid1Q/lDqh9eEGy5Xs8U7ivL+EIOuklYcE2110C0SVC9bsfWRES
 u9Xx0b+LeIrp0lsyZFAbQTFGbx/pdvxwDZUjcC7coJRfJedKt6Z1NnnCSj9c0hAX
 v9ZtRnPkgnOAzVINwsci2dtrcxBUPqYN9JxX4aW47BMftiASBv8y8xmeE7KVvAyq
 9KOl/UtCUPTngH9oXCJm1MXe5rTN4YLs5fcBW6qz4/DwT1g8oSykCf0hs7t9vpKg
 dH0iRjt55Nw3GbvvzKvUtfHikSmGiP5iLMZ+t9U7R2b/KYc6Mt74ystKY7sgElFc
 3Pc1mus+RkBXZYnl4YKgSmkZkbMoauStuBG13lY6Fa3PHTExv3TnNSmin77KHbyX
 257uN7hee0yxmLSiL7FzoJ3DIlmYMsc0oM9T2PArO+tRY/Unh45QSq6LObm06J53
 9kPJhZOdYqvdEZNwrvSnFsDqg1B/KtJYupg59gI9O/+I0mRWuk7KD9EJzKerF1cq
 SU+E3UciQeisixRb1HJVga/bfhLEDUZnOUw8RcLJx3O3Qz9neRk=
 =v98T
 -----END PGP SIGNATURE-----

Merge tag 'arm-dt-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull ARM devicetree updates from Arnd Bergmann:
 "After a somewhat quiet 5.17 release, the size of the DT changes is a
  bit larger again. There are nine new SoC that get added, all of them
  related to existing platforms:

   - Airoha (formerly Mediatek/EcoNet) EN7523 networking SoC and EVB

   - Mediatek mt6582 tablet platform with the Prestigio PMT5008 3G
     tablet

   - Microchip Lan966 networking SoC and it evaluation board

   - Qualcomm Snapdragon 625/632 midrange phone SoCs, with the LG Nexus
     5X and Fairphone FP3 phones

   - Renesas RZ/G2LC and RZ/V2L general-purpose embedded SoCs, along
     with their evaluation boards

   - Samsung Exynos 850 phone SoC and reference board

   - Samsung Exynos7885 with the Samsung Galaxy A8 (2018) phone

   - Tesla FSD (Fully Self-Driving), an automotive SoC loosely derived
     from the Samsung Exynos family.

   - TI K3/AM62 SoC and reference board

  Support for additional functionality in existing dts files is added
  all over the place: Samsung, Renesas, Mstar, wpcm450, OMAP, AT91,
  Allwinner, i.MX, Tegra, Aspeed, Oxnas, Qualcomm, Mediatek, and
  Broadcom.

  Samsung has a rework for its pinctrl schema that is a bit tricky and
  requires driver changes to be included here.

  A few more platforms only have smaller cleanups and DT Schema fixes,
  this includes SoCFPGA, ux500, ixp4xx, STi, Xilinx Zynq, LG, and Juno.

  The new machines are really too many to list, but I'll do it anyway:

  Allwinner:
   - A20-Marsboard development board

  Amlogic:
   - Amediatek X96-AIR (Amlogic S905X3)
   - CYX A95XF3-AIR (Amlogic S905X3)
   - Haochuangy H96-Max (Amlogic S905X3)
   - Amlogic AQ222 (Amlogic S4)
   - OSMC Vero 4K+ (Amlogic S905D)

  Arm Juno:
   - Separate DT depending on SCMI firmware version

  Aspeed:
   - Quanta S6Q BMC (AST2600)
   - ASRock ROMED8HM3 (AST2500)

  Broadcom:
   - Raspberry Pi Zero 2 W

  Marvell MVEBU/Armada:
   - Ctera C200 V1 NAS (kirkwood)
   - Ctera C200 V2 NAS (armada-370)

  Mstar:
   - DongShanPiOne, a low-end embedded board
   - Miyoo Mini handheld game console

  NXP i.MX:
   - Numerous i.MX8M Mini based boards in even more variations, but
    none based on other SoCs this time:
    Protonic PRT8MM, emCON-MX8M Mini, Toradex Verdin, and
    Gateworks GW7903

  Qualcomm:
   - Google Herobrine R1 Chromebook platform (Snapdragon 7c Gen 3)
   - SHIFT6mq phone (Snapdragon 845)
   - Samsung Galaxy Book2 (Snapdragon 850)
   - Snapdragon 8 Gen 1 Hardware Development Kit

  TI OMAP:
   - SanCloud BeagleBone Enhanced WiFi

  Rockchip:
   - Pine64 PineNote ereader tablet (rk356x)
   - Bananapi-R2-Pro (rk356x)

  STM32:
   - emtrion emSBS-Argon embedded board (stm32mp157c)"

* tag 'arm-dt-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (627 commits)
  arm64: dts: n5x: drop invalid property and fix edac node name
  arm64: dts: fsd: Add the MCT support
  arm64: dts: stingray: Fix spi clock name
  arm64: dts: ns2: Fix spi clock name
  ARM: dts: rockchip: Update regulator name for PX3
  ARM: dts: rockchip: Add #clock-cells value for rk805
  arm64: dts: rockchip: Add #clock-cells value for rk805
  arm64: dts: rockchip: Remove vcc13 and vcc14 for rk808
  arm64: dts: rockchip: Fix SDIO regulator supply properties on rk3399-firefly
  ARM: dts: at91: sama7g5: Add NAND support
  ARM: dts: at91: sama7g5: add eic node
  ARM: dts: at91: sama7g5: Remove unused properties in i2c nodes
  ARM: dts: at91: sam9x60ek: modify vdd_1v5 regulator to vdd_1v15
  arm64: dts: lg: align pl330 node name with dtschema
  arm64: dts: lg: add dma-cells to pl330 node
  arm64: dts: juno: align pl330 node name with dtschema
  arm64: dts: broadcom: Fix sata nodename
  arm64: dts: n5x: add sdr edac support
  arm64: dts: agilex/stratix10: add clock-names to USB DWC2 node
  dt-bindings: usb: dwc2: add disable-over-current
  ...
This commit is contained in:
Linus Torvalds 2022-03-23 18:37:22 -07:00
parent b4bc93bd76 bcea9aaa43
commit ed4643521e
581 changed files with 40917 additions and 5610 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

28
Documentation/devicetree/bindings/arm/airoha.yaml Normal file
View File

@ -0,0 +1,28 @@
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/arm/airoha.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Airoha SoC based Platforms Device Tree Bindings
maintainers:
- Felix Fietkau <nbd@nbd.name>
- John Crispin <john@phrozen.org>
description:
Boards with an Airoha SoC shall have the following properties.
properties:
$nodename:
const: '/'
compatible:
oneOf:
- items:
- enum:
- airoha,en7523-evb
- const: airoha,en7523
additionalProperties: true
...

46
Documentation/devicetree/bindings/arm/altera.yaml
View File

@ -13,12 +13,46 @@ properties:
$nodename:
const: "/"
compatible:
items:
- enum:
- altr,socfpga-cyclone5
- altr,socfpga-arria5
- altr,socfpga-arria10
- const: altr,socfpga
oneOf:
- description: Arria 5 boards
items:
- enum:
- altr,socfpga-arria5-socdk
- const: altr,socfpga-arria5
- const: altr,socfpga
- description: Arria 10 boards
items:
- enum:
- altr,socfpga-arria10-socdk
- enclustra,mercury-aa1
- const: altr,socfpga-arria10
- const: altr,socfpga
- description: Cyclone 5 boards
items:
- enum:
- altr,socfpga-cyclone5-socdk
- denx,mcvevk
- ebv,socrates
- macnica,sodia
- novtech,chameleon96
- samtec,vining
- terasic,de0-atlas
- terasic,socfpga-cyclone5-sockit
- const: altr,socfpga-cyclone5
- const: altr,socfpga
- description: Stratix 10 boards
items:
- enum:
- altr,socfpga-stratix10-socdk
- const: altr,socfpga-stratix10
- description: SoCFPGA VT
items:
- const: altr,socfpga-vt
- const: altr,socfpga
additionalProperties: true

12
Documentation/devicetree/bindings/arm/amlogic.yaml
View File

@ -108,6 +108,7 @@ properties:
- amlogic,p230
- amlogic,p231
- libretech,aml-s905d-pc
- osmc,vero4k-plus
- phicomm,n1
- smartlabs,sml5442tw
- videostrong,gxl-kii-pro
@ -170,9 +171,14 @@ properties:
- description: Boards with the Amlogic Meson SM1 S905X3/D3/Y3 SoC
items:
- enum:
- amediatech,x96-air
- amediatech,x96-air-gbit
- bananapi,bpi-m5
- cyx,a95xf3-air
- cyx,a95xf3-air-gbit
- hardkernel,odroid-c4
- hardkernel,odroid-hc4
- haochuangyi,h96-max
- khadas,vim3l
- seirobotics,sei610
- const: amlogic,sm1
@ -183,6 +189,12 @@ properties:
- amlogic,ad401
- const: amlogic,a1
- description: Boards with the Amlogic Meson S4 S805X2 SoC
items:
- enum:
- amlogic,aq222
- const: amlogic,s4
additionalProperties: true
...

9
Documentation/devicetree/bindings/arm/atmel-at91.yaml
View File

@ -175,6 +175,15 @@ properties:
- const: microchip,lan9668
- const: microchip,lan966
- description: Kontron KSwitch D10 MMT series
items:
- enum:
- kontron,kswitch-d10-mmt-8g
- kontron,kswitch-d10-mmt-6g-2gs
- const: kontron,s1921
- const: microchip,lan9668
- const: microchip,lan966
- items:
- enum:
- atmel,sams70j19

1
Documentation/devicetree/bindings/arm/bcm/bcm2835.yaml
View File

@ -51,6 +51,7 @@ properties:
- raspberrypi,3-model-b-plus
- raspberrypi,3-compute-module
- raspberrypi,3-compute-module-lite
- raspberrypi,model-zero-2-w
- const: brcm,bcm2837
additionalProperties: true

1
Documentation/devicetree/bindings/arm/cpus.yaml
View File

@ -173,6 +173,7 @@ properties:
- nvidia,tegra194-carmel
- qcom,krait
- qcom,kryo
- qcom,kryo250
- qcom,kryo260
- qcom,kryo280
- qcom,kryo385

24
Documentation/devicetree/bindings/arm/fsl.yaml
View File

@ -762,6 +762,7 @@ properties:
- enum:
- beacon,imx8mm-beacon-kit # i.MX8MM Beacon Development Kit
- boundary,imx8mm-nitrogen8mm # i.MX8MM Nitrogen Board
- emtrion,emcon-mx8mm-avari # emCON-MX8MM SoM on Avari Base
- fsl,imx8mm-ddr4-evk # i.MX8MM DDR4 EVK Board
- fsl,imx8mm-evk # i.MX8MM EVK Board
- gw,imx8mm-gw71xx-0x # i.MX8MM Gateworks Development Kit
@ -769,8 +770,13 @@ properties:
- gw,imx8mm-gw73xx-0x # i.MX8MM Gateworks Development Kit
- gw,imx8mm-gw7901 # i.MX8MM Gateworks Board
- gw,imx8mm-gw7902 # i.MX8MM Gateworks Board
- gw,imx8mm-gw7903 # i.MX8MM Gateworks Board
- kontron,imx8mm-n801x-som # i.MX8MM Kontron SL (N801X) SOM
- toradex,verdin-imx8mm # Verdin iMX8M Mini Modules
- toradex,verdin-imx8mm-nonwifi # Verdin iMX8M Mini Modules without Wi-Fi / BT
- toradex,verdin-imx8mm-wifi # Verdin iMX8M Mini Wi-Fi / BT Modules
- variscite,var-som-mx8mm # i.MX8MM Variscite VAR-SOM-MX8MM module
- prt,prt8mm # i.MX8MM Protonic PRT8MM Board
- const: fsl,imx8mm
- description: Engicam i.Core MX8M Mini SoM based boards
@ -787,6 +793,24 @@ properties:
- const: kontron,imx8mm-n801x-som
- const: fsl,imx8mm
- description: Toradex Boards with Verdin iMX8M Mini Modules
items:
- enum:
- toradex,verdin-imx8mm-nonwifi-dahlia # Verdin iMX8M Mini Module on Dahlia
- toradex,verdin-imx8mm-nonwifi-dev # Verdin iMX8M Mini Module on Verdin Development Board
- const: toradex,verdin-imx8mm-nonwifi # Verdin iMX8M Mini Module without Wi-Fi / BT
- const: toradex,verdin-imx8mm # Verdin iMX8M Mini Module
- const: fsl,imx8mm
- description: Toradex Boards with Verdin iMX8M Mini Wi-Fi / BT Modules
items:
- enum:
- toradex,verdin-imx8mm-wifi-dahlia # Verdin iMX8M Mini Wi-Fi / BT Module on Dahlia
- toradex,verdin-imx8mm-wifi-dev # Verdin iMX8M Mini Wi-Fi / BT M. on Verdin Development B.
- const: toradex,verdin-imx8mm-wifi # Verdin iMX8M Mini Wi-Fi / BT Module
- const: toradex,verdin-imx8mm # Verdin iMX8M Mini Module
- const: fsl,imx8mm
- description: Variscite VAR-SOM-MX8MM based boards
items:
- const: variscite,var-som-mx8mm-symphony

26
Documentation/devicetree/bindings/arm/intel,socfpga.yaml Normal file
View File

@ -0,0 +1,26 @@
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/arm/intel,socfpga.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Intel SoCFPGA platform device tree bindings
maintainers:
- Dinh Nguyen <dinguyen@kernel.org>
properties:
$nodename:
const: "/"
compatible:
oneOf:
- description: AgileX boards
items:
- enum:
- intel,n5x-socdk
- intel,socfpga-agilex-socdk
- const: intel,socfpga-agilex
additionalProperties: true
...

4
Documentation/devicetree/bindings/arm/mediatek.yaml
View File

@ -30,6 +30,10 @@ properties:
- enum:
- mediatek,mt6580-evbp1
- const: mediatek,mt6580
- items:
- enum:
- prestigio,pmt5008-3g
- const: mediatek,mt6582
- items:
- enum:
- fairphone,fp1

4
Documentation/devicetree/bindings/arm/mstar/mstar.yaml
View File

@ -23,8 +23,12 @@ properties:
- description: infinity2m boards
items:
- enum:
- 100ask,dongshanpione # 100ask DongShanPiOne
- honestar,ssd201htv2 # Honestar SSD201_HT_V2 devkit
- m5stack,unitv2 # M5Stack UnitV2
- miyoo,miyoo-mini # Miyoo Mini
- wirelesstag,ido-som2d01 # Wireless Tag IDO-SOM2D01
- wirelesstag,ido-sbc2d06-v1b-22w # Wireless Tag IDO-SBC2D06-1VB-22W
- const: mstar,infinity2m
- description: infinity3 boards

48
Documentation/devicetree/bindings/arm/npcm/nuvoton,gcr.yaml Normal file
View File

@ -0,0 +1,48 @@
# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
%YAML 1.2
---
$id: http://devicetree.org/schemas/arm/npcm/nuvoton,gcr.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Global Control Registers block in Nuvoton SoCs
maintainers:
- Jonathan Neuschäfer <j.neuschaefer@gmx.net>
description:
The Global Control Registers (GCR) are a block of registers in Nuvoton SoCs
that expose misc functionality such as chip model and version information or
pinmux settings.
properties:
compatible:
items:
- enum:
- nuvoton,wpcm450-gcr
- nuvoton,npcm750-gcr
- const: syscon
- const: simple-mfd
reg:
maxItems: 1
required:
- compatible
- reg
additionalProperties:
type: object
examples:
- |
gcr: syscon@800000 {
compatible = "nuvoton,npcm750-gcr", "syscon", "simple-mfd";
reg = <0x800000 0x1000>;
mux-controller {
compatible = "mmio-mux";
#mux-control-cells = <1>;
mux-reg-masks = <0x38 0x07>;
idle-states = <2>;
};
};

23
Documentation/devicetree/bindings/arm/qcom.yaml
View File

@ -42,6 +42,7 @@ description: |
sc7180
sc7280
sdm630
sdm632
sdm660
sdm845
sdx55
@ -172,7 +173,21 @@ properties:
- const: qcom,apq8094
- items:
- const: qcom,msm8996-mtp
- enum:
- arrow,apq8096-db820c
- inforce,ifc6640
- const: qcom,apq8096-sbc
- const: qcom,apq8096
- items:
- enum:
- qcom,msm8996-mtp
- sony,dora-row
- sony,kagura-row
- sony,keyaki-row
- xiaomi,gemini
- xiaomi,scorpio
- const: qcom,msm8996
- items:
- enum:
@ -210,6 +225,11 @@ properties:
- google,senor
- const: qcom,sc7280
- items:
- enum:
- fairphone,fp3
- const: qcom,sdm632
- items:
- enum:
- xiaomi,lavender
@ -262,6 +282,7 @@ properties:
- items:
- enum:
- qcom,sm8450-hdk
- qcom,sm8450-qrd
- const: qcom,sm8450

9
Documentation/devicetree/bindings/arm/renesas.yaml
View File

@ -421,6 +421,15 @@ properties:
- renesas,r9a07g044l2 # Dual Cortex-A55 RZ/G2L
- const: renesas,r9a07g044
- description: RZ/V2L (R9A07G054)
items:
- enum:
- renesas,smarc-evk # SMARC EVK
- enum:
- renesas,r9a07g054l1 # Single Cortex-A55 RZ/V2L
- renesas,r9a07g054l2 # Dual Cortex-A55 RZ/V2L
- const: renesas,r9a07g054
additionalProperties: true
...

13
Documentation/devicetree/bindings/arm/rockchip.yaml
View File

@ -481,6 +481,14 @@ properties:
- const: pine64,pinebook-pro
- const: rockchip,rk3399
- description: Pine64 PineNote
items:
- enum:
- pine64,pinenote-v1.1
- pine64,pinenote-v1.2
- const: pine64,pinenote
- const: rockchip,rk3566
- description: Pine64 Rock64
items:
- const: pine64,rock64
@ -651,6 +659,11 @@ properties:
- const: rockchip,rk3568-evb1-v10
- const: rockchip,rk3568
- description: Rockchip RK3568 Banana Pi R2 Pro
items:
- const: rockchip,rk3568-bpi-r2pro
- const: rockchip,rk3568
additionalProperties: true
...

2
Documentation/devicetree/bindings/arm/samsung/samsung-boards.yaml
View File

@ -140,6 +140,8 @@ properties:
items:
- enum:
- insignal,arndale-octa # Insignal Arndale Octa
- samsung,chagall-wifi # Samsung SM-T800
- samsung,klimt-wifi # Samsung SM-T700
- samsung,smdk5420 # Samsung SMDK5420 eval
- const: samsung,exynos5420
- const: samsung,exynos5

6
Documentation/devicetree/bindings/arm/stm32/stm32.yaml
View File

@ -28,6 +28,12 @@ properties:
- enum:
- st,stm32mp153
- st,stm32mp157
- description: emtrion STM32MP1 Argon based Boards
items:
- const: emtrion,stm32mp157c-emsbc-argon
- const: emtrion,stm32mp157c-emstamp-argon
- const: st,stm32mp157
- items:
- enum:
- st,stm32f429i-disco

5
Documentation/devicetree/bindings/arm/sunxi.yaml
View File

@ -444,6 +444,11 @@ properties:
- const: haoyu,a10-marsboard
- const: allwinner,sun4i-a10
- description: HAOYU Electronics Marsboard A20
items:
- const: haoyu,a20-marsboard
- const: allwinner,sun7i-a20
- description: MapleBoard MP130
items:
- const: mapleboard,mp130

27
Documentation/devicetree/bindings/arm/tesla.yaml Normal file
View File

@ -0,0 +1,27 @@
# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
%YAML 1.2
---
$id: http://devicetree.org/schemas/arm/tesla.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Tesla Full Self Driving(FSD) platforms device tree bindings
maintainers:
- Alim Akhtar <alim.akhtar@samsung.com>
- linux-fsd@tesla.com
properties:
$nodename:
const: '/'
compatible:
oneOf:
- description: FSD SoC board
items:
- enum:
- tesla,fsd-evb # Tesla FSD Evaluation
- const: tesla,fsd
additionalProperties: true
...

6
Documentation/devicetree/bindings/arm/ti/k3.yaml
View File

@ -46,6 +46,12 @@ properties:
- ti,j7200-evm
- const: ti,j7200
- description: K3 AM625 SoC
items:
- enum:
- ti,am625-sk
- const: ti,am625
- description: K3 AM642 SoC
items:
- enum:

20
Documentation/devicetree/bindings/clock/intc_stratix10.txt
View File

@ -1,20 +0,0 @@
Device Tree Clock bindings for Intel's SoCFPGA Stratix10 platform
This binding uses the common clock binding[1].
[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
Required properties:
- compatible : shall be
"intel,stratix10-clkmgr"
- reg : shall be the control register offset from CLOCK_MANAGER's base for the clock.
- #clock-cells : from common clock binding, shall be set to 1.
Example:
clkmgr: clock-controller@ffd10000 {
compatible = "intel,stratix10-clkmgr";
reg = <0xffd10000 0x1000>;
#clock-cells = <1>;
};

35
Documentation/devicetree/bindings/clock/intel,stratix10.yaml Normal file
View File

@ -0,0 +1,35 @@
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/clock/intel,stratix10.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Intel SoCFPGA Stratix10 platform clock controller binding
maintainers:
- Dinh Nguyen <dinguyen@kernel.org>
properties:
compatible:
const: intel,stratix10-clkmgr
'#clock-cells':
const: 1
reg:
maxItems: 1
required:
- compatible
- reg
- '#clock-cells'
additionalProperties: false
examples:
- |
clock-controller@ffd10000 {
compatible = "intel,stratix10-clkmgr";
reg = <0xffd10000 0x1000>;
#clock-cells = <1>;
};

45
Documentation/devicetree/bindings/clock/mstar,msc313-cpupll.yaml Normal file
View File

@ -0,0 +1,45 @@
# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/clock/mstar,msc313-cpupll.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: MStar/Sigmastar MSC313 CPU PLL
maintainers:
- Daniel Palmer <daniel@thingy.jp>
description: |
The MStar/SigmaStar MSC313 and later ARMv7 chips have a scalable
PLL that can be used as the clock source for the CPU(s).
properties:
compatible:
const: mstar,msc313-cpupll
"#clock-cells":
const: 1
clocks:
maxItems: 1
reg:
maxItems: 1
required:
- compatible
- "#clock-cells"
- clocks
- reg
additionalProperties: false
examples:
- |
#include <dt-bindings/clock/mstar-msc313-mpll.h>
cpupll: cpupll@206400 {
compatible = "mstar,msc313-cpupll";
reg = <0x206400 0x200>;
#clock-cells = <1>;
clocks = <&mpll MSTAR_MSC313_MPLL_DIV2>;
};

1
Documentation/devicetree/bindings/phy/qcom,usb-hs-phy.txt
View File

@ -9,6 +9,7 @@ PROPERTIES
following:
"qcom,usb-hs-phy-apq8064"
"qcom,usb-hs-phy-msm8226"
"qcom,usb-hs-phy-msm8916"
"qcom,usb-hs-phy-msm8974"

52
Documentation/devicetree/bindings/pinctrl/samsung,pinctrl-gpio-bank.yaml Normal file
View File

@ -0,0 +1,52 @@
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/pinctrl/samsung,pinctrl-gpio-bank.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Samsung S3C/S5P/Exynos SoC pin controller - gpio bank
maintainers:
- Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
- Sylwester Nawrocki <s.nawrocki@samsung.com>
- Tomasz Figa <tomasz.figa@gmail.com>
description: |
This is a part of device tree bindings for Samsung S3C/S5P/Exynos SoC pin
controller.
GPIO bank description for Samsung S3C/S5P/Exynos SoC pin controller.
See also Documentation/devicetree/bindings/pinctrl/samsung,pinctrl.yaml for
additional information and example.
properties:
'#gpio-cells':
const: 2
gpio-controller: true
'#interrupt-cells':
description:
For GPIO banks supporting external GPIO interrupts or external wake-up
interrupts.
const: 2
interrupt-controller:
description:
For GPIO banks supporting external GPIO interrupts or external wake-up
interrupts.
interrupts:
description:
For GPIO banks supporting direct external wake-up interrupts (without
multiplexing). Number of interrupts must match number of wake-up capable
pins of this bank.
minItems: 1
maxItems: 8
required:
- '#gpio-cells'
- gpio-controller
additionalProperties: false

81
Documentation/devicetree/bindings/pinctrl/samsung,pinctrl-pins-cfg.yaml Normal file
View File

@ -0,0 +1,81 @@
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/pinctrl/samsung,pinctrl-pins-cfg.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Samsung S3C/S5P/Exynos SoC pin controller - pins configuration
maintainers:
- Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
- Sylwester Nawrocki <s.nawrocki@samsung.com>
- Tomasz Figa <tomasz.figa@gmail.com>
description: |
This is a part of device tree bindings for Samsung S3C/S5P/Exynos SoC pin
controller.
Pins configuration for Samsung S3C/S5P/Exynos SoC pin controller.
The values used for config properties should be derived from the hardware
manual and these values are programmed as-is into the pin pull up/down and
driver strength register of the pin-controller.
See also include/dt-bindings/pinctrl/samsung.h with useful constants.
See also Documentation/devicetree/bindings/pinctrl/samsung,pinctrl.yaml for
additional information and example.
properties:
samsung,pins:
description: |
List of pins to configure. For initial and sleep states, the maximum
number is one pin. In other cases there is no upper limit.
The pins should use lowercase names matching hardware manual, e.g. for
GPA0 bank: gpa0-0, gpa0-1, gpa0-2.
$ref: /schemas/types.yaml#/definitions/string-array
samsung,pin-function:
description: |
The pin function selection that should be applied on the pins listed in the
child node is specified using the "samsung,pin-function" property. The value
of this property that should be applied to each of the pins listed in the
"samsung,pins" property should be picked from the hardware manual of the SoC
for the specified pin group. This property is optional in the child node if
no specific function selection is desired for the pins listed in the child
node. The value of this property is used as-is to program the pin-controller
function selector register of the pin-bank.
$ref: /schemas/types.yaml#/definitions/uint32
minimum: 0
maximum: 15
samsung,pin-drv:
description: Drive strength configuration.
$ref: /schemas/types.yaml#/definitions/uint32
minimum: 0
maximum: 15
samsung,pin-pud:
description: Pull up/down configuration.
$ref: /schemas/types.yaml#/definitions/uint32
enum: [0, 1, 2, 3]
samsung,pin-val:
description: Initial value of pin output buffer.
$ref: /schemas/types.yaml#/definitions/uint32
enum: [0, 1]
samsung,pin-con-pdn:
description: Function in power down mode.
$ref: /schemas/types.yaml#/definitions/uint32
enum: [0, 1, 2, 3]
samsung,pin-pud-pdn:
description: Pull up/down configuration in power down mode.
$ref: /schemas/types.yaml#/definitions/uint32
enum: [0, 1, 2, 3]
required:
- samsung,pins
additionalProperties: false

106
Documentation/devicetree/bindings/pinctrl/samsung,pinctrl-wakeup-interrupt.yaml Normal file
View File

@ -0,0 +1,106 @@
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/pinctrl/samsung,pinctrl-wakeup-interrupt.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Samsung S3C/S5P/Exynos SoC pin controller - wake-up interrupt controller
maintainers:
- Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
- Sylwester Nawrocki <s.nawrocki@samsung.com>
- Tomasz Figa <tomasz.figa@gmail.com>
description: |
This is a part of device tree bindings for Samsung S3C/S5P/Exynos SoC pin
controller.
External wake-up interrupts for Samsung S3C/S5P/Exynos SoC pin controller.
For S3C24xx, S3C64xx, S5PV210 and Exynos4210 compatible wake-up interrupt
controllers, only one pin-controller device node can include external wake-up
interrupts child node (in other words, only one External wake-up interrupts
pin-controller is supported).
For newer controllers, multiple pin-controller device node can include
external wake-up interrupts child node.
See also Documentation/devicetree/bindings/pinctrl/samsung,pinctrl.yaml for
additional information and example.
properties:
compatible:
enum:
- samsung,s3c2410-wakeup-eint
- samsung,s3c2412-wakeup-eint
- samsung,s3c64xx-wakeup-eint
- samsung,s5pv210-wakeup-eint
- samsung,exynos4210-wakeup-eint
- samsung,exynos7-wakeup-eint
- samsung,exynos850-wakeup-eint
- samsung,exynosautov9-wakeup-eint
interrupts:
description:
Interrupt used by multiplexed external wake-up interrupts.
minItems: 1
maxItems: 6
required:
- compatible
allOf:
- if:
properties:
compatible:
contains:
enum:
- samsung,s3c2410-wakeup-eint
- samsung,s3c2412-wakeup-eint
then:
properties:
interrupts:
minItems: 6
maxItems: 6
required:
- interrupts
- if:
properties:
compatible:
contains:
const: samsung,s3c64xx-wakeup-eint
then:
properties:
interrupts:
minItems: 4
maxItems: 4
required:
- interrupts
- if:
properties:
compatible:
contains:
enum:
- samsung,s5pv210-wakeup-eint
- samsung,exynos4210-wakeup-eint
- samsung,exynos7-wakeup-eint
then:
properties:
interrupts:
minItems: 1
maxItems: 1
required:
- interrupts
- if:
properties:
compatible:
contains:
enum:
- samsung,exynos850-wakeup-eint
- samsung,exynosautov9-wakeup-eint
then:
properties:
interrupts: false
additionalProperties: false

392
Documentation/devicetree/bindings/pinctrl/samsung,pinctrl.yaml Normal file
View File

@ -0,0 +1,392 @@
# SPDX-License-Identifier: GPL-2.0-only
%YAML 1.2
---
$id: http://devicetree.org/schemas/pinctrl/samsung,pinctrl.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Samsung S3C/S5P/Exynos SoC pin controller
maintainers:
- Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
- Sylwester Nawrocki <s.nawrocki@samsung.com>
- Tomasz Figa <tomasz.figa@gmail.com>
description: |
This is a part of device tree bindings for Samsung S3C/S5P/Exynos SoC pin
controller.
Pin group settings (like drive strength, pull up/down) are available as
macros in include/dt-bindings/pinctrl/samsung.h.
All the pin controller nodes should be represented in the aliases node using
the following format 'pinctrl{n}' where n is a unique number for the alias.
The controller supports three types of interrupts::
- External GPIO interrupts (see interrupts property in pin controller node);
- External wake-up interrupts - multiplexed (capable of waking up the system
see interrupts property in external wake-up interrupt controller node -
samsung,pinctrl-wakeup-interrupt.yaml);
- External wake-up interrupts - direct (capable of waking up the system, see
interrupts property in every bank of pin controller with external wake-up
interrupt controller - samsung,pinctrl-gpio-bank.yaml).
properties:
$nodename:
pattern: "^pinctrl(@.*)?"
compatible:
enum:
- samsung,s3c2412-pinctrl
- samsung,s3c2416-pinctrl
- samsung,s3c2440-pinctrl
- samsung,s3c2450-pinctrl
- samsung,s3c64xx-pinctrl
- samsung,s5pv210-pinctrl
- samsung,exynos3250-pinctrl
- samsung,exynos4210-pinctrl
- samsung,exynos4x12-pinctrl
- samsung,exynos5250-pinctrl
- samsung,exynos5260-pinctrl
- samsung,exynos5410-pinctrl
- samsung,exynos5420-pinctrl
- samsung,exynos5433-pinctrl
- samsung,exynos7-pinctrl
- samsung,exynos7885-pinctrl
- samsung,exynos850-pinctrl
- samsung,exynosautov9-pinctrl
interrupts:
description:
Required for GPIO banks supporting external GPIO interrupts.
maxItems: 1
power-domains:
maxItems: 1
reg:
description:
Second base address of the pin controller if the specific registers of
the pin controller are separated into the different base address.
Only certain banks of certain pin controller might need it.
minItems: 1
maxItems: 2
wakeup-interrupt-controller:
$ref: samsung,pinctrl-wakeup-interrupt.yaml
patternProperties:
"^[a-z]+[0-9]*-gpio-bank$":
description:
Pin banks of the controller are represented by child nodes of the
controller node. Bank name is taken from name of the node.
$ref: samsung,pinctrl-gpio-bank.yaml
"^[a-z0-9-]+-pins$":
oneOf:
- $ref: samsung,pinctrl-pins-cfg.yaml
required:
- samsung,pins
- type: object
patternProperties:
"^[a-z0-9-]+-pins$":
$ref: samsung,pinctrl-pins-cfg.yaml
additionalProperties: false
"^(initial|sleep)-state$":
patternProperties:
"^(pin-[a-z0-9-]+|[a-z0-9-]+-pin)$":
$ref: samsung,pinctrl-pins-cfg.yaml
properties:
samsung,pins:
description: See samsung,pinctrl-pins-cfg.yaml
$ref: /schemas/types.yaml#/definitions/string-array
maxItems: 1
required:
- samsung,pins
unevaluatedProperties: false
required:
- compatible
- reg
allOf:
- $ref: "pinctrl.yaml#"
- if:
properties:
compatible:
contains:
const: samsung,exynos5433-pinctrl
then:
properties:
reg:
minItems: 1
maxItems: 2
else:
properties:
reg:
minItems: 1
maxItems: 1
additionalProperties: false
examples:
- |
#include <dt-bindings/pinctrl/samsung.h>
pinctrl@7f008000 {
compatible = "samsung,s3c64xx-pinctrl";
reg = <0x7f008000 0x1000>;
interrupt-parent = <&vic1>;
interrupts = <21>;
wakeup-interrupt-controller {
compatible = "samsung,s3c64xx-wakeup-eint";
interrupts-extended = <&vic0 0>,
<&vic0 1>,
<&vic1 0>,
<&vic1 1>;
};
/* Pin bank with external GPIO or muxed external wake-up interrupts */
gpa-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
// ...
uart0-data-pins {
samsung,pins = "gpa-0", "gpa-1";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
// ...
};
- |
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/pinctrl/samsung.h>
pinctrl@11400000 {
compatible = "samsung,exynos4210-pinctrl";
reg = <0x11400000 0x1000>;
interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&sleep0>;
/* Pin bank with external GPIO or muxed external wake-up interrupts */
gpa0-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
// ...
uart0-data-pins {
samsung,pins = "gpa0-0", "gpa0-1";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
// ...
sleep0: sleep-state {
gpa0-0-pin {
samsung,pins = "gpa0-0";
samsung,pin-con-pdn = <EXYNOS_PIN_PDN_INPUT>;
samsung,pin-pud-pdn = <EXYNOS_PIN_PULL_NONE>;
};
gpa0-1-pin {
samsung,pins = "gpa0-1";
samsung,pin-con-pdn = <EXYNOS_PIN_PDN_OUT0>;
samsung,pin-pud-pdn = <EXYNOS_PIN_PULL_NONE>;
};
// ...
};
};
- |
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/pinctrl/samsung.h>
pinctrl@11000000 {
compatible = "samsung,exynos4210-pinctrl";
reg = <0x11000000 0x1000>;
interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
wakeup-interrupt-controller {
compatible = "samsung,exynos4210-wakeup-eint";
interrupt-parent = <&gic>;
interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
};
/* Pin bank with external GPIO or muxed external wake-up interrupts */
gpj0-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
/* Pin bank without external interrupts */
gpy0-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
};
/* Pin bank with external direct wake-up interrupts */
gpx0-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
interrupt-parent = <&gic>;
interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
#interrupt-cells = <2>;
};
// ...
sd0-clk-pins {
samsung,pins = "gpk0-0";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
sd4-bus-width8-pins {
part-1-pins {
samsung,pins = "gpk0-3", "gpk0-4",
"gpk0-5", "gpk0-6";
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
part-2-pins {
samsung,pins = "gpk1-3", "gpk1-4",
"gpk1-5", "gpk1-6";
samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
};
// ...
otg-gp-pins {
samsung,pins = "gpx3-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
samsung,pin-val = <0>;
};
};
- |
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/pinctrl/samsung.h>
pinctrl@10580000 {
compatible = "samsung,exynos5433-pinctrl";
reg = <0x10580000 0x1a20>, <0x11090000 0x100>;
pinctrl-names = "default";
pinctrl-0 = <&initial_alive>;
wakeup-interrupt-controller {
compatible = "samsung,exynos7-wakeup-eint";
interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
};
/* Pin bank with external direct wake-up interrupts */
gpa0-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
interrupt-parent = <&gic>;
interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
#interrupt-cells = <2>;
};
// ...
te-irq-pins {
samsung,pins = "gpf1-3";
samsung,pin-function = <0xf>;
};
// ..
initial_alive: initial-state {
gpa0-0-pin {
samsung,pins = "gpa0-0";
samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
};
// ...
};
};
- |
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/pinctrl/samsung.h>
pinctrl@114b0000 {
compatible = "samsung,exynos5433-pinctrl";
reg = <0x114b0000 0x1000>;
interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
power-domains = <&pd_aud>;
/* Pin bank with external GPIO or muxed external wake-up interrupts */
gpz0-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
// ...
i2s0-bus-pins {
samsung,pins = "gpz0-0", "gpz0-1", "gpz0-2", "gpz0-3",
"gpz0-4", "gpz0-5", "gpz0-6";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
};
// ...
};

383
Documentation/devicetree/bindings/pinctrl/samsung-pinctrl.txt
View File

@ -1,383 +0,0 @@
Samsung GPIO and Pin Mux/Config controller
Samsung's ARM based SoC's integrates a GPIO and Pin mux/config hardware
controller. It controls the input/output settings on the available pads/pins
and also provides ability to multiplex and configure the output of various
on-chip controllers onto these pads.
Required Properties:
- compatible: should be one of the following.
- "samsung,s3c2412-pinctrl": for S3C2412-compatible pin-controller,
- "samsung,s3c2416-pinctrl": for S3C2416-compatible pin-controller,
- "samsung,s3c2440-pinctrl": for S3C2440-compatible pin-controller,
- "samsung,s3c2450-pinctrl": for S3C2450-compatible pin-controller,
- "samsung,s3c64xx-pinctrl": for S3C64xx-compatible pin-controller,
- "samsung,s5pv210-pinctrl": for S5PV210-compatible pin-controller,
- "samsung,exynos3250-pinctrl": for Exynos3250 compatible pin-controller.
- "samsung,exynos4210-pinctrl": for Exynos4210 compatible pin-controller.
- "samsung,exynos4x12-pinctrl": for Exynos4x12 compatible pin-controller.
- "samsung,exynos5250-pinctrl": for Exynos5250 compatible pin-controller.
- "samsung,exynos5260-pinctrl": for Exynos5260 compatible pin-controller.
- "samsung,exynos5410-pinctrl": for Exynos5410 compatible pin-controller.
- "samsung,exynos5420-pinctrl": for Exynos5420 compatible pin-controller.
- "samsung,exynos5433-pinctrl": for Exynos5433 compatible pin-controller.
- "samsung,exynos7-pinctrl": for Exynos7 compatible pin-controller.
- "samsung,exynos7885-pinctrl": for Exynos7885 compatible pin-controller.
- "samsung,exynos850-pinctrl": for Exynos850 compatible pin-controller.
- "samsung,exynosautov9-pinctrl": for ExynosAutov9 compatible pin-controller.
- reg: Base address of the pin controller hardware module and length of
the address space it occupies.
- reg: Second base address of the pin controller if the specific registers
of the pin controller are separated into the different base address.
Eg: GPF[1-5] of Exynos5433 are separated into the two base address.
- First base address is for GPAx and GPF[1-5] external interrupt
registers.
- Second base address is for GPF[1-5] pinctrl registers.
pinctrl_0: pinctrl@10580000 {
compatible = "samsung,exynos5433-pinctrl";
reg = <0x10580000 0x1a20>, <0x11090000 0x100>;
wakeup-interrupt-controller {
compatible = "samsung,exynos7-wakeup-eint";
interrupts = <0 16 0>;
};
};
- Pin banks as child nodes: Pin banks of the controller are represented by child
nodes of the controller node. Bank name is taken from name of the node. Each
bank node must contain following properties:
- gpio-controller: identifies the node as a gpio controller and pin bank.
- #gpio-cells: number of cells in GPIO specifier. Since the generic GPIO
binding is used, the amount of cells must be specified as 2. See the below
mentioned gpio binding representation for description of particular cells.
Eg: <&gpx2 6 0>
<[phandle of the gpio controller node]
[pin number within the gpio controller]
[flags]>
Values for gpio specifier:
- Pin number: is a value between 0 to 7.
- Flags: 0 - Active High
1 - Active Low
- Pin mux/config groups as child nodes: The pin mux (selecting pin function
mode) and pin config (pull up/down, driver strength) settings are represented
as child nodes of the pin-controller node. There should be at least one
child node and there is no limit on the count of these child nodes. It is
also possible for a child node to consist of several further child nodes
to allow grouping multiple pinctrl groups into one. The format of second
level child nodes is exactly the same as for first level ones and is
described below.
The child node should contain a list of pin(s) on which a particular pin
function selection or pin configuration (or both) have to applied. This
list of pins is specified using the property name "samsung,pins". There
should be at least one pin specified for this property and there is no upper
limit on the count of pins that can be specified. The pins are specified
using pin names which are derived from the hardware manual of the SoC. As
an example, the pins in GPA0 bank of the pin controller can be represented
as "gpa0-0", "gpa0-1", "gpa0-2" and so on. The names should be in lower case.
The format of the pin names should be (as per the hardware manual)
"[pin bank name]-[pin number within the bank]".
The pin function selection that should be applied on the pins listed in the
child node is specified using the "samsung,pin-function" property. The value
of this property that should be applied to each of the pins listed in the
"samsung,pins" property should be picked from the hardware manual of the SoC
for the specified pin group. This property is optional in the child node if
no specific function selection is desired for the pins listed in the child
node. The value of this property is used as-is to program the pin-controller
function selector register of the pin-bank.
The child node can also optionally specify one or more of the pin
configuration that should be applied on all the pins listed in the
"samsung,pins" property of the child node. The following pin configuration
properties are supported.
- samsung,pin-val: Initial value of pin output buffer.
- samsung,pin-pud: Pull up/down configuration.
- samsung,pin-drv: Drive strength configuration.
- samsung,pin-pud-pdn: Pull up/down configuration in power down mode.
- samsung,pin-drv-pdn: Drive strength configuration in power down mode.
The values specified by these config properties should be derived from the
hardware manual and these values are programmed as-is into the pin
pull up/down and driver strength register of the pin-controller.
Note: A child should include at least a pin function selection property or
pin configuration property (one or more) or both.
The client nodes that require a particular pin function selection and/or
pin configuration should use the bindings listed in the "pinctrl-bindings.txt"
file.
External GPIO and Wakeup Interrupts:
The controller supports two types of external interrupts over gpio. The first
is the external gpio interrupt and second is the external wakeup interrupts.
The difference between the two is that the external wakeup interrupts can be
used as system wakeup events.
A. External GPIO Interrupts: For supporting external gpio interrupts, the
following properties should be specified in the pin-controller device node.
- interrupts: interrupt specifier for the controller. The format and value of
the interrupt specifier depends on the interrupt parent for the controller.
In addition, following properties must be present in node of every bank
of pins supporting GPIO interrupts:
- interrupt-controller: identifies the controller node as interrupt-parent.
- #interrupt-cells: the value of this property should be 2.
- First Cell: represents the external gpio interrupt number local to the
external gpio interrupt space of the controller.
- Second Cell: flags to identify the type of the interrupt
- 1 = rising edge triggered
- 2 = falling edge triggered
- 3 = rising and falling edge triggered
- 4 = high level triggered
- 8 = low level triggered
B. External Wakeup Interrupts: For supporting external wakeup interrupts, a
child node representing the external wakeup interrupt controller should be
included in the pin-controller device node.
Only one pin-controller device node can include external wakeup interrupts
child node (in other words, only one External Wakeup Interrupts
pin-controller is supported).
This child node should include following properties:
- compatible: identifies the type of the external wakeup interrupt controller
The possible values are:
- samsung,s3c2410-wakeup-eint: represents wakeup interrupt controller
found on Samsung S3C24xx SoCs except S3C2412 and S3C2413,
- samsung,s3c2412-wakeup-eint: represents wakeup interrupt controller
found on Samsung S3C2412 and S3C2413 SoCs,
- samsung,s3c64xx-wakeup-eint: represents wakeup interrupt controller
found on Samsung S3C64xx SoCs,
- samsung,s5pv210-wakeup-eint: represents wakeup interrupt controller
found on Samsung S5Pv210 SoCs,
- samsung,exynos4210-wakeup-eint: represents wakeup interrupt controller
found on Samsung Exynos4210 and S5PC110/S5PV210 SoCs.
- samsung,exynos7-wakeup-eint: represents wakeup interrupt controller
found on Samsung Exynos7 SoC.
- interrupts: interrupt used by multiplexed wakeup interrupts.
In addition, following properties must be present in node of every bank
of pins supporting wake-up interrupts:
- interrupt-controller: identifies the node as interrupt-parent.
- #interrupt-cells: the value of this property should be 2
- First Cell: represents the external wakeup interrupt number local to
the external wakeup interrupt space of the controller.
- Second Cell: flags to identify the type of the interrupt
- 1 = rising edge triggered
- 2 = falling edge triggered
- 3 = rising and falling edge triggered
- 4 = high level triggered
- 8 = low level triggered
Node of every bank of pins supporting direct wake-up interrupts (without
multiplexing) must contain following properties:
- interrupts: interrupts of the interrupt parent which are used for external
wakeup interrupts from pins of the bank, must contain interrupts for all
pins of the bank.
Aliases:
All the pin controller nodes should be represented in the aliases node using
the following format 'pinctrl{n}' where n is a unique number for the alias.
Aliases for controllers compatible with "samsung,exynos7-pinctrl":
- pinctrl0: pin controller of ALIVE block,
- pinctrl1: pin controller of BUS0 block,
- pinctrl2: pin controller of NFC block,
- pinctrl3: pin controller of TOUCH block,
- pinctrl4: pin controller of FF block,
- pinctrl5: pin controller of ESE block,
- pinctrl6: pin controller of FSYS0 block,
- pinctrl7: pin controller of FSYS1 block,
- pinctrl8: pin controller of BUS1 block,
- pinctrl9: pin controller of AUDIO block,
Example: A pin-controller node with pin banks:
pinctrl_0: pinctrl@11400000 {
compatible = "samsung,exynos4210-pinctrl";
reg = <0x11400000 0x1000>;
interrupts = <0 47 0>;
/* ... */
/* Pin bank without external interrupts */
gpy0: gpy0 {
gpio-controller;
#gpio-cells = <2>;
};
/* ... */
/* Pin bank with external GPIO or muxed wake-up interrupts */
gpj0: gpj0 {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
/* ... */
/* Pin bank with external direct wake-up interrupts */
gpx0: gpx0 {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
interrupt-parent = <&gic>;
interrupts = <0 16 0>, <0 17 0>, <0 18 0>, <0 19 0>,
<0 20 0>, <0 21 0>, <0 22 0>, <0 23 0>;
#interrupt-cells = <2>;
};
/* ... */
};
Example 1: A pin-controller node with pin groups.
#include <dt-bindings/pinctrl/samsung.h>
pinctrl_0: pinctrl@11400000 {
compatible = "samsung,exynos4210-pinctrl";
reg = <0x11400000 0x1000>;
interrupts = <0 47 0>;
/* ... */
uart0_data: uart0-data {
samsung,pins = "gpa0-0", "gpa0-1";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
uart0_fctl: uart0-fctl {
samsung,pins = "gpa0-2", "gpa0-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
uart1_data: uart1-data {
samsung,pins = "gpa0-4", "gpa0-5";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
uart1_fctl: uart1-fctl {
samsung,pins = "gpa0-6", "gpa0-7";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
i2c2_bus: i2c2-bus {
samsung,pins = "gpa0-6", "gpa0-7";
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
sd4_bus8: sd4-bus-width8 {
part-1 {
samsung,pins = "gpk0-3", "gpk0-4",
"gpk0-5", "gpk0-6";
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
part-2 {
samsung,pins = "gpk1-3", "gpk1-4",
"gpk1-5", "gpk1-6";
samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
};
};
Example 2: A pin-controller node with external wakeup interrupt controller node.
pinctrl_1: pinctrl@11000000 {
compatible = "samsung,exynos4210-pinctrl";
reg = <0x11000000 0x1000>;
interrupts = <0 46 0>
/* ... */
wakeup-interrupt-controller {
compatible = "samsung,exynos4210-wakeup-eint";
interrupt-parent = <&gic>;
interrupts = <0 32 0>;
};
};
Example 3: A uart client node that supports 'default' and 'flow-control' states.
uart@13800000 {
compatible = "samsung,exynos4210-uart";
reg = <0x13800000 0x100>;
interrupts = <0 52 0>;
pinctrl-names = "default", "flow-control;
pinctrl-0 = <&uart0_data>;
pinctrl-1 = <&uart0_data>, <&uart0_fctl>;
};
Example 4: Set up the default pin state for uart controller.
static int s3c24xx_serial_probe(struct platform_device *pdev) {
struct pinctrl *pinctrl;
/* ... */
pinctrl = devm_pinctrl_get_select_default(&pdev->dev);
}
Example 5: A display port client node that supports 'default' pinctrl state
and gpio binding.
display-port-controller {
/* ... */
samsung,hpd-gpio = <&gpx2 6 0>;
pinctrl-names = "default";
pinctrl-0 = <&dp_hpd>;
};
Example 6: Request the gpio for display port controller
static int exynos_dp_probe(struct platform_device *pdev)
{
int hpd_gpio, ret;
struct device *dev = &pdev->dev;
struct device_node *dp_node = dev->of_node;
/* ... */
hpd_gpio = of_get_named_gpio(dp_node, "samsung,hpd-gpio", 0);
/* ... */
ret = devm_gpio_request_one(&pdev->dev, hpd_gpio, GPIOF_IN,
"hpd_gpio");
/* ... */
}

2
Documentation/devicetree/bindings/power/fsl,imx-gpcv2.yaml
View File

@ -28,6 +28,7 @@ properties:
- fsl,imx8mn-gpc
- fsl,imx8mq-gpc
- fsl,imx8mm-gpc
- fsl,imx8mp-gpc
reg:
maxItems: 1
@ -57,6 +58,7 @@ properties:
include/dt-bindings/power/imx7-power.h for fsl,imx7d-gpc and
include/dt-bindings/power/imx8m-power.h for fsl,imx8mq-gpc
include/dt-bindings/power/imx8mm-power.h for fsl,imx8mm-gpc
include/dt-bindings/power/imx8mp-power.h for fsl,imx8mp-gpc
maxItems: 1
clocks:

7
Documentation/devicetree/bindings/power/renesas,rzg2l-sysc.yaml
View File

@ -4,14 +4,14 @@
$id: "http://devicetree.org/schemas/power/renesas,rzg2l-sysc.yaml#"
$schema: "http://devicetree.org/meta-schemas/core.yaml#"
title: Renesas RZ/G2L System Controller (SYSC)
title: Renesas RZ/{G2L,V2L} System Controller (SYSC)
maintainers:
- Geert Uytterhoeven <geert+renesas@glider.be>
description:
The RZ/G2L System Controller (SYSC) performs system control of the LSI and
supports following functions,
The RZ/{G2L,V2L} System Controller (SYSC) performs system control of the LSI
and supports following functions,
- External terminal state capture function
- 34-bit address space access function
- Low power consumption control
@ -21,6 +21,7 @@ properties:
compatible:
enum:
- renesas,r9a07g044-sysc # RZ/G2{L,LC}
- renesas,r9a07g054-sysc # RZ/V2L
reg:
maxItems: 1

78
Documentation/devicetree/bindings/soc/imx/fsl,imx8mp-hsio-blk-ctrl.yaml Normal file
View File

@ -0,0 +1,78 @@
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/soc/imx/fsl,imx8mp-hsio-blk-ctrl.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: NXP i.MX8MP HSIO blk-ctrl
maintainers:
- Lucas Stach <l.stach@pengutronix.de>
description:
The i.MX8MP HSIO blk-ctrl is a top-level peripheral providing access to
the NoC and ensuring proper power sequencing of the high-speed IO
(USB an PCIe) peripherals located in the HSIO domain of the SoC.
properties:
compatible:
items:
- const: fsl,imx8mp-hsio-blk-ctrl
- const: syscon
reg:
maxItems: 1
'#power-domain-cells':
const: 1
power-domains:
minItems: 6
maxItems: 6
power-domain-names:
items:
- const: bus
- const: usb
- const: usb-phy1
- const: usb-phy2
- const: pcie
- const: pcie-phy
clocks:
minItems: 2
maxItems: 2
clock-names:
items:
- const: usb
- const: pcie
required:
- compatible
- reg
- power-domains
- power-domain-names
- clocks
- clock-names
additionalProperties: false
examples:
- |
#include <dt-bindings/clock/imx8mp-clock.h>
#include <dt-bindings/power/imx8mp-power.h>
hsio_blk_ctrl: blk-ctrl@32f10000 {
compatible = "fsl,imx8mp-hsio-blk-ctrl", "syscon";
reg = <0x32f10000 0x24>;
clocks = <&clk IMX8MP_CLK_USB_ROOT>,
<&clk IMX8MP_CLK_PCIE_ROOT>;
clock-names = "usb", "pcie";
power-domains = <&pgc_hsiomix>, <&pgc_hsiomix>,
<&pgc_usb1_phy>, <&pgc_usb2_phy>,
<&pgc_hsiomix>, <&pgc_pcie_phy>;
power-domain-names = "bus", "usb", "usb-phy1",
"usb-phy2", "pcie", "pcie-phy";
#power-domain-cells = <1>;
};

71
Documentation/devicetree/bindings/soc/imx/fsl,imx8mq-vpu-blk-ctrl.yaml Normal file
View File

@ -0,0 +1,71 @@
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/soc/imx/fsl,imx8mq-vpu-blk-ctrl.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: NXP i.MX8MQ VPU blk-ctrl
maintainers:
- Lucas Stach <l.stach@pengutronix.de>
description:
The i.MX8MQ VPU blk-ctrl is a top-level peripheral providing access to
the NoC and ensuring proper power sequencing of the VPU peripherals
located in the VPU domain of the SoC.
properties:
compatible:
items:
- const: fsl,imx8mq-vpu-blk-ctrl
reg:
maxItems: 1
'#power-domain-cells':
const: 1
power-domains:
minItems: 3
maxItems: 3
power-domain-names:
items:
- const: bus
- const: g1
- const: g2
clocks:
minItems: 2
maxItems: 2
clock-names:
items:
- const: g1
- const: g2
required:
- compatible
- reg
- power-domains
- power-domain-names
- clocks
- clock-names
additionalProperties: false
examples:
- |
#include <dt-bindings/clock/imx8mq-clock.h>
#include <dt-bindings/power/imx8mq-power.h>
vpu_blk_ctrl: blk-ctrl@38320000 {
compatible = "fsl,imx8mq-vpu-blk-ctrl";
reg = <0x38320000 0x100>;
power-domains = <&pgc_vpu>, <&pgc_vpu>, <&pgc_vpu>;
power-domain-names = "bus", "g1", "g2";
clocks = <&clk IMX8MQ_CLK_VPU_G1_ROOT>,
<&clk IMX8MQ_CLK_VPU_G2_ROOT>;
clock-names = "g1", "g2";
#power-domain-cells = <1>;
};

1
Documentation/devicetree/bindings/soc/rockchip/grf.yaml
View File

@ -15,6 +15,7 @@ properties:
- items:
- enum:
- rockchip,rk3288-sgrf
- rockchip,rk3568-usb2phy-grf
- rockchip,rv1108-usbgrf
- const: syscon
- items:

1
Documentation/devicetree/bindings/timer/mediatek,mtk-timer.txt
View File

@ -12,6 +12,7 @@ Required properties:
For those SoCs that use GPT
* "mediatek,mt2701-timer" for MT2701 compatible timers (GPT)
* "mediatek,mt6580-timer" for MT6580 compatible timers (GPT)
* "mediatek,mt6582-timer" for MT6582 compatible timers (GPT)
* "mediatek,mt6589-timer" for MT6589 compatible timers (GPT)
* "mediatek,mt7623-timer" for MT7623 compatible timers (GPT)
* "mediatek,mt8127-timer" for MT8127 compatible timers (GPT)

8
Documentation/devicetree/bindings/usb/dwc2.yaml
View File

@ -41,6 +41,7 @@ properties:
- amlogic,meson8b-usb
- amlogic,meson-gxbb-usb
- amlogic,meson-g12a-usb
- intel,socfpga-agilex-hsotg
- const: snps,dwc2
- const: amcc,dwc-otg
- const: apm,apm82181-dwc-otg
@ -68,6 +69,13 @@ properties:
items:
- const: otg
disable-over-current:
type: boolean
description: whether to disable detection of over-current condition.
iommus:
maxItems: 1
resets:
items:
- description: common reset

18
Documentation/devicetree/bindings/vendor-prefixes.yaml
View File

@ -23,6 +23,8 @@ patternProperties:
"^(simple-audio-card|st-plgpio|st-spics|ts),.*": true
# Keep list in alphabetical order.
"^100ask,.*":
description: Baiwen.com (100ask).
"^70mai,.*":
description: 70mai Co., Ltd.
"^8dev,.*":
@ -61,6 +63,8 @@ patternProperties:
description: Aeroflex Gaisler AB
"^aesop,.*":
description: AESOP Embedded Forum
"^airoha,.*":
description: Airoha
"^al,.*":
description: Annapurna Labs
"^alcatel,.*":
@ -277,12 +281,16 @@ patternProperties:
description: Hangzhou C-SKY Microsystems Co., Ltd
"^csq,.*":
description: Shenzen Chuangsiqi Technology Co.,Ltd.
"^ctera,.*":
description: CTERA Networks Intl.
"^cubietech,.*":
description: Cubietech, Ltd.
"^cui,.*":
description: CUI Devices
"^cypress,.*":
description: Cypress Semiconductor Corporation
"^cyx,.*":
description: Shenzhen CYX Industrial Co., Ltd
"^cznic,.*":
description: CZ.NIC, z.s.p.o.
"^dallas,.*":
@ -489,6 +497,8 @@ patternProperties:
deprecated: true
"^hannstar,.*":
description: HannStar Display Corporation
"^haochuangyi,.*":
description: Shenzhen Haochuangyi Technology Co.,Ltd
"^haoyu,.*":
description: Haoyu Microelectronic Co. Ltd.
"^hardkernel,.*":
@ -769,6 +779,8 @@ patternProperties:
description: MiraMEMS Sensing Technology Co., Ltd.
"^mitsubishi,.*":
description: Mitsubishi Electric Corporation
"^miyoo,.*":
description: Miyoo
"^mntre,.*":
description: MNT Research GmbH
"^modtronix,.*":
@ -892,6 +904,8 @@ patternProperties:
description: Ortus Technology Co., Ltd.
"^osddisplays,.*":
description: OSD Displays
"^osmc,.*":
description: Sam Nazarko Trading Ltd. (Open Source Media Centre)
"^ouya,.*":
description: Ouya Inc.
"^overkiz,.*":
@ -1205,6 +1219,8 @@ patternProperties:
description: Shenzhen Techstar Electronics Co., Ltd.
"^terasic,.*":
description: Terasic Inc.
"^tesla,.*":
description: Tesla, Inc.
"^tfc,.*":
description: Three Five Corp
"^thead,.*":
@ -1350,6 +1366,8 @@ patternProperties:
description: WinLink Co., Ltd
"^winstar,.*":
description: Winstar Display Corp.
"^wirelesstag,.*":
description: Wireless Tag (qiming yunduan)
"^wits,.*":
description: Shenzhen Merrii Technology Co., Ltd. (WITS)
"^wlf,.*":

1
Documentation/devicetree/bindings/watchdog/mtk-wdt.txt
View File

@ -8,6 +8,7 @@ Required properties:
- compatible should contain:
"mediatek,mt2701-wdt", "mediatek,mt6589-wdt": for MT2701
"mediatek,mt2712-wdt": for MT2712
"mediatek,mt6582-wdt", "mediatek,mt6589-wdt": for MT6582
"mediatek,mt6589-wdt": for MT6589
"mediatek,mt6797-wdt", "mediatek,mt6589-wdt": for MT6797
"mediatek,mt7622-wdt", "mediatek,mt6589-wdt": for MT7622

18
MAINTAINERS
View File

@ -1685,9 +1685,9 @@ S: Maintained
F: drivers/clk/sunxi/
ARM/Allwinner sunXi SoC support
M: Maxime Ripard <mripard@kernel.org>
M: Chen-Yu Tsai <wens@csie.org>
R: Jernej Skrabec <jernej.skrabec@gmail.com>
M: Jernej Skrabec <jernej.skrabec@gmail.com>
M: Samuel Holland <samuel@sholland.org>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
S: Maintained
T: git git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux.git
@ -2358,6 +2358,7 @@ L: openbmc@lists.ozlabs.org (moderated for non-subscribers)
S: Supported
F: Documentation/devicetree/bindings/*/*/*npcm*
F: Documentation/devicetree/bindings/*/*npcm*
F: Documentation/devicetree/bindings/arm/npcm/*
F: arch/arm/boot/dts/nuvoton-npcm*
F: arch/arm/mach-npcm/
F: drivers/*/*npcm*
@ -2368,6 +2369,7 @@ ARM/NUVOTON WPCM450 ARCHITECTURE
M: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
L: openbmc@lists.ozlabs.org (moderated for non-subscribers)
S: Maintained
W: https://github.com/neuschaefer/wpcm450/wiki
F: Documentation/devicetree/bindings/*/*wpcm*
F: arch/arm/boot/dts/nuvoton-wpcm450*
F: arch/arm/mach-npcm/wpcm450.c
@ -2522,6 +2524,7 @@ M: Magnus Damm <magnus.damm@gmail.com>
L: linux-renesas-soc@vger.kernel.org
S: Supported
Q: http://patchwork.kernel.org/project/linux-renesas-soc/list/
C: irc://irc.libera.chat/renesas-soc
T: git git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel.git next
F: Documentation/devicetree/bindings/arm/renesas.yaml
F: arch/arm64/boot/dts/renesas/
@ -2638,6 +2641,7 @@ M: Magnus Damm <magnus.damm@gmail.com>
L: linux-renesas-soc@vger.kernel.org
S: Supported
Q: http://patchwork.kernel.org/project/linux-renesas-soc/list/
C: irc://irc.libera.chat/renesas-soc
T: git git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel.git next
F: Documentation/devicetree/bindings/arm/renesas.yaml
F: arch/arm/boot/dts/emev2*
@ -2751,6 +2755,14 @@ S: Maintained
F: Documentation/devicetree/bindings/media/tegra-cec.txt
F: drivers/media/cec/platform/tegra/
ARM/TESLA FSD SoC SUPPORT
M: Alim Akhtar <alim.akhtar@samsung.com>
M: linux-fsd@tesla.com
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
L: linux-samsung-soc@vger.kernel.org
S: Maintained
F: arch/arm64/boot/dts/tesla*
ARM/TETON BGA MACHINE SUPPORT
M: "Mark F. Brown" <mark.brown314@gmail.com>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
@ -15374,7 +15386,7 @@ S: Maintained
C: irc://irc.libera.chat/linux-exynos
Q: https://patchwork.kernel.org/project/linux-samsung-soc/list/
T: git git://git.kernel.org/pub/scm/linux/kernel/git/pinctrl/samsung.git
F: Documentation/devicetree/bindings/pinctrl/samsung-pinctrl.txt
F: Documentation/devicetree/bindings/pinctrl/samsung,pinctrl*yaml
F: drivers/pinctrl/samsung/
F: include/dt-bindings/pinctrl/samsung.h

12
arch/arm/Kconfig
View File

@ -563,6 +563,18 @@ config ARCH_VIRT
select HAVE_ARM_ARCH_TIMER
select ARCH_SUPPORTS_BIG_ENDIAN
config ARCH_AIROHA
bool "Airoha SoC Support"
depends on ARCH_MULTI_V7
select ARM_AMBA
select ARM_GIC
select ARM_GIC_V3
select ARM_PSCI
select HAVE_ARM_ARCH_TIMER
select COMMON_CLK
help
Support for Airoha EN7523 SoCs
#
# This is sorted alphabetically by mach-* pathname. However, plat-*
# Kconfigs may be included either alphabetically (according to the

1
arch/arm/Makefile
View File

@ -160,6 +160,7 @@ textofs-$(CONFIG_ARCH_AXXIA) := 0x00308000
# Machine directory name. This list is sorted alphanumerically
# by CONFIG_* macro name.
machine-$(CONFIG_ARCH_ACTIONS) += actions
machine-$(CONFIG_ARCH_AIROHA) += airoha
machine-$(CONFIG_ARCH_ALPINE) += alpine
machine-$(CONFIG_ARCH_ARTPEC) += artpec
machine-$(CONFIG_ARCH_ASPEED) += aspeed

19
arch/arm/boot/dts/Makefile
View File

@ -93,6 +93,7 @@ dtb-$(CONFIG_ARCH_BCM2835) += \
bcm2837-rpi-3-b.dtb \
bcm2837-rpi-3-b-plus.dtb \
bcm2837-rpi-cm3-io3.dtb \
bcm2837-rpi-zero-2-w.dtb \
bcm2711-rpi-400.dtb \
bcm2711-rpi-4-b.dtb \
bcm2711-rpi-cm4-io.dtb \
@ -187,6 +188,8 @@ dtb-$(CONFIG_ARCH_DAVINCI) += \
da850-lego-ev3.dtb
dtb-$(CONFIG_ARCH_DIGICOLOR) += \
cx92755_equinox.dtb
dtb-$(CONFIG_ARCH_AIROHA) += \
en7523-evb.dtb
dtb-$(CONFIG_ARCH_EXYNOS3) += \
exynos3250-artik5-eval.dtb \
exynos3250-monk.dtb \
@ -221,6 +224,8 @@ dtb-$(CONFIG_ARCH_EXYNOS5) += \
exynos5420-arndale-octa.dtb \
exynos5420-peach-pit.dtb \
exynos5420-smdk5420.dtb \
exynos5420-chagall-wifi.dtb \
exynos5420-klimt-wifi.dtb \
exynos5422-odroidhc1.dtb \
exynos5422-odroidxu3.dtb \
exynos5422-odroidxu3-lite.dtb \
@ -269,7 +274,7 @@ dtb-$(CONFIG_ARCH_IXP4XX) += \
intel-ixp42x-dlink-dsm-g600.dtb \
intel-ixp42x-gateworks-gw2348.dtb \
intel-ixp43x-gateworks-gw2358.dtb \
intel-ixp42x-netgear-wg302v2.dtb \
intel-ixp42x-netgear-wg302v1.dtb \
intel-ixp42x-arcom-vulcan.dtb \
intel-ixp42x-gateway-7001.dtb
dtb-$(CONFIG_ARCH_KEYSTONE) += \
@ -281,6 +286,7 @@ dtb-$(CONFIG_ARCH_KEYSTONE) += \
dtb-$(CONFIG_MACH_KIRKWOOD) += \
kirkwood-b3.dtb \
kirkwood-blackarmor-nas220.dtb \
kirkwood-c200-v1.dtb \
kirkwood-cloudbox.dtb \
kirkwood-d2net.dtb \
kirkwood-db-88f6281.dtb \
@ -735,6 +741,8 @@ dtb-$(CONFIG_SOC_IMX7D) += \
dtb-$(CONFIG_SOC_IMX7ULP) += \
imx7ulp-com.dtb \
imx7ulp-evk.dtb
dtb-$(CONFIG_SOC_LAN966) += \
lan966x-pcb8291.dtb
dtb-$(CONFIG_SOC_LS1021A) += \
ls1021a-moxa-uc-8410a.dtb \
ls1021a-qds.dtb \
@ -895,6 +903,7 @@ dtb-$(CONFIG_SOC_AM33XX) += \
am335x-regor-rdk.dtb \
am335x-sancloud-bbe.dtb \
am335x-sancloud-bbe-lite.dtb \
am335x-sancloud-bbe-extended-wifi.dtb \
am335x-shc.dtb \
am335x-sbc-t335.dtb \
am335x-sl50.dtb \
@ -1162,6 +1171,7 @@ dtb-$(CONFIG_ARCH_STM32) += \
stm32mp157c-dhcom-picoitx.dtb \
stm32mp157c-dk2.dtb \
stm32mp157c-ed1.dtb \
stm32mp157c-emsbc-argon.dtb \
stm32mp157c-ev1.dtb \
stm32mp157c-lxa-mc1.dtb \
stm32mp157c-odyssey.dtb
@ -1229,6 +1239,7 @@ dtb-$(CONFIG_MACH_SUN7I) += \
sun7i-a20-bananapro.dtb \
sun7i-a20-cubieboard2.dtb \
sun7i-a20-cubietruck.dtb \
sun7i-a20-haoyu-marsboard.dtb \
sun7i-a20-hummingbird.dtb \
sun7i-a20-itead-ibox.dtb \
sun7i-a20-i12-tvbox.dtb \
@ -1416,6 +1427,7 @@ dtb-$(CONFIG_ARCH_ZYNQ) += \
zynq-zybo.dtb \
zynq-zybo-z7.dtb
dtb-$(CONFIG_MACH_ARMADA_370) += \
armada-370-c200-v2.dtb \
armada-370-db.dtb \
armada-370-dlink-dns327l.dtb \
armada-370-mirabox.dtb \
@ -1493,6 +1505,9 @@ dtb-$(CONFIG_ARCH_MEDIATEK) += \
dtb-$(CONFIG_ARCH_MILBEAUT) += milbeaut-m10v-evb.dtb
dtb-$(CONFIG_ARCH_MSTARV7) += \
mstar-infinity-msc313-breadbee_crust.dtb \
mstar-infinity2m-ssd202d-100ask-dongshanpione.dtb \
mstar-infinity2m-ssd202d-miyoo-mini.dtb \
mstar-infinity2m-ssd202d-wirelesstag-ido-sbc2d06-v1b-22w.dtb \
mstar-infinity2m-ssd202d-ssd201htv2.dtb \
mstar-infinity2m-ssd202d-unitv2.dtb \
mstar-infinity3-msc313e-breadbee.dtb \
@ -1506,6 +1521,7 @@ dtb-$(CONFIG_ARCH_ASPEED) += \
aspeed-bmc-arm-centriq2400-rep.dtb \
aspeed-bmc-arm-stardragon4800-rep2.dtb \
aspeed-bmc-asrock-e3c246d4i.dtb \
aspeed-bmc-asrock-romed8hm3.dtb \
aspeed-bmc-bytedance-g220a.dtb \
aspeed-bmc-facebook-bletchley.dtb \
aspeed-bmc-facebook-cloudripper.dtb \
@ -1543,6 +1559,7 @@ dtb-$(CONFIG_ARCH_ASPEED) += \
aspeed-bmc-opp-zaius.dtb \
aspeed-bmc-portwell-neptune.dtb \
aspeed-bmc-quanta-q71l.dtb \
aspeed-bmc-quanta-s6q.dtb \
aspeed-bmc-supermicro-x11spi.dtb \
aspeed-bmc-inventec-transformers.dtb \
aspeed-bmc-tyan-s7106.dtb \

2
arch/arm/boot/dts/am335x-pdu001.dts
View File

@ -353,7 +353,7 @@
};
};
mcp79400: mcp79400@6f {
mcp79400: rtc@6f {
compatible = "microchip,mcp7940x";
reg = <0x6f>;
};

113
arch/arm/boot/dts/am335x-sancloud-bbe-extended-wifi.dts Normal file
View File

@ -0,0 +1,113 @@
// SPDX-License-Identifier: GPL-2.0-only
/*
* Copyright (C) 2021 Sancloud Ltd
* Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
*/
/dts-v1/;
#include "am33xx.dtsi"
#include "am335x-bone-common.dtsi"
#include "am335x-boneblack-common.dtsi"
#include "am335x-sancloud-bbe-common.dtsi"
#include <dt-bindings/interrupt-controller/irq.h>
/ {
model = "SanCloud BeagleBone Enhanced Extended WiFi";
compatible = "sancloud,am335x-boneenhanced",
"ti,am335x-bone-black",
"ti,am335x-bone",
"ti,am33xx";
wlan_en_reg: fixedregulator@2 {
compatible = "regulator-fixed";
regulator-name = "wlan-en-regulator";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
startup-delay-us= <100000>;
};
};
&am33xx_pinmux {
mmc3_pins: pinmux_mmc3_pins {
pinctrl-single,pins = <
/* gpmc_a9.gpio1_25: RADIO_EN */
AM33XX_PADCONF(AM335X_PIN_GPMC_A9, PIN_OUTPUT_PULLUP, MUX_MODE7)
/* gpmc_ad12.mmc2_dat0 */
AM33XX_PADCONF(AM335X_PIN_GPMC_AD12, PIN_INPUT_PULLUP, MUX_MODE3)
/* gpmc_ad13.mmc2_dat1 */
AM33XX_PADCONF(AM335X_PIN_GPMC_AD13, PIN_INPUT_PULLUP, MUX_MODE3)
/* gpmc_ad14.mmc2_dat2 */
AM33XX_PADCONF(AM335X_PIN_GPMC_AD14, PIN_INPUT_PULLUP, MUX_MODE3)
/* gpmc_ad15.mmc2_dat3 */
AM33XX_PADCONF(AM335X_PIN_GPMC_AD15, PIN_INPUT_PULLUP, MUX_MODE3)
/* gpmc_csn3.mmc2_cmd */
AM33XX_PADCONF(AM335X_PIN_GPMC_CSN3, PIN_INPUT_PULLUP, MUX_MODE3)
/* gpmc_clk.mmc2_clk */
AM33XX_PADCONF(AM335X_PIN_GPMC_CLK, PIN_INPUT_PULLUP, MUX_MODE3)
>;
};
bluetooth_pins: pinmux_bluetooth_pins {
pinctrl-single,pins = <
/* event_intr0.gpio0_19 */
AM33XX_PADCONF(AM335X_PIN_XDMA_EVENT_INTR0, PIN_INPUT_PULLUP, MUX_MODE7)
>;
};
uart1_pins: pinmux_uart1_pins {
pinctrl-single,pins = <
/* uart1_rxd */
AM33XX_PADCONF(AM335X_PIN_UART1_RXD, PIN_INPUT, MUX_MODE0)
/* uart1_txd */
AM33XX_PADCONF(AM335X_PIN_UART1_TXD, PIN_INPUT, MUX_MODE0)
/* uart1_ctsn */
AM33XX_PADCONF(AM335X_PIN_UART1_CTSN, PIN_INPUT_PULLDOWN, MUX_MODE0)
/* uart1_rtsn */
AM33XX_PADCONF(AM335X_PIN_UART1_RTSN, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
>;
};
};
&i2c2 {
status = "disabled";
};
&mmc3 {
status = "okay";
vmmc-supply = <&wlan_en_reg>;
bus-width = <4>;
non-removable;
cap-power-off-card;
ti,needs-special-hs-handling;
keep-power-in-suspend;
pinctrl-names = "default";
pinctrl-0 = <&mmc3_pins>;
dmas = <&edma_xbar 12 0 1
&edma_xbar 13 0 2>;
dma-names = "tx", "rx";
clock-frequency = <50000000>;
max-frequency = <50000000>;
};
&uart1 {
status = "okay";
bluetooth {
pinctrl-names = "default";
pinctrl-0 = <&uart1_pins &bluetooth_pins>;
compatible = "qcom,qca6174-bt";
enable-gpios = <&gpio1 25 GPIO_ACTIVE_HIGH>;
clocks = <&l4ls_clkctrl AM3_L4LS_UART2_CLKCTRL 0>;
interrupt-parent = <&gpio0>;
interrupts = <19 IRQ_TYPE_EDGE_RISING>;
};
};

388
arch/arm/boot/dts/armada-370-c200-v2.dts Normal file
View File

@ -0,0 +1,388 @@
// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
/*
* Device Tree file for Ctera C200-V2
*
* Copyright (C) 2022 Pawel Dembicki <paweldembicki@gmail.com>
*/
/dts-v1/;
#include "armada-370.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/thermal/thermal.h>
#include <dt-bindings/leds/common.h>
/ {
model = "Ctera C200 V2";
compatible = "ctera,c200-v2", "marvell,armada370", "marvell,armada-370-xp";
chosen {
bootargs = "console=ttyS0,115200";
stdout-path = "serial0:115200n8";
};
memory {
device_type = "memory";
reg = <0x00000000 0x40000000>; /* 1024 MB */
};
soc {
ranges = <MBUS_ID(0xf0, 0x01) 0 0xd0000000 0x100000
MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000
MBUS_ID(0x09, 0x01) 0 0xf1100000 0x10000>;
};
thermal-zones {
ethphy-thermal {
polling-delay = <20000>;
polling-delay-passive = <2000>;
thermal-sensors = <&ethphy0>;
trips {
ethphy_alert1: trip1 {
temperature = <65000>;
hysteresis = <4000>;
type = "passive";
};
ethphy_crit: trip2 {
temperature = <100000>;
hysteresis = <2000>;
type = "critical";
};
};
};
};
beeper {
compatible = "pwm-beeper";
pinctrl-0 = <&pmx_beeper>;
pinctrl-names = "default";
pwms = <&gpio1 31 4000>;
};
gpio-poweroff {
compatible = "gpio-poweroff";
pinctrl-0 = <&pmx_poweroff>;
pinctrl-names = "default";
gpios = <&gpio0 7 GPIO_ACTIVE_HIGH>;
};
keys {
compatible = "gpio-keys";
pinctrl-0 = <&pmx_buttons>;
pinctrl-names = "default";
power {
label = "Power Button";
linux,code = <KEY_POWER>;
gpios = <&gpio0 10 GPIO_ACTIVE_HIGH>;
};
reset {
label = "Reset Button";
linux,code = <KEY_RESTART>;
gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
};
usb1 {
label = "USB1 Button";
linux,code = <BTN_0>;
gpios = <&gpio1 0 GPIO_ACTIVE_LOW>;
};
usb2 {
label = "USB2 Button";
linux,code = <BTN_1>;
gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
};
};
leds {
compatible = "gpio-leds";
pinctrl-0 = <&pmx_leds1 &pmx_leds2>;
pinctrl-names = "default";
led-0 {
function = LED_FUNCTION_USB;
function-enumerator = <2>;
color = <LED_COLOR_ID_RED>;
gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
};
led-1 {
function = LED_FUNCTION_USB;
function-enumerator = <2>;
color = <LED_COLOR_ID_GREEN>;
gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
};
led-2 {
function = LED_FUNCTION_USB;
function-enumerator = <1>;
color = <LED_COLOR_ID_RED>;
gpios = <&gpio0 15 GPIO_ACTIVE_LOW>;
};
led-3 {
function = LED_FUNCTION_USB;
function-enumerator = <1>;
color = <LED_COLOR_ID_GREEN>;
gpios = <&gpio0 16 GPIO_ACTIVE_LOW>;
};
led-4 {
function = LED_FUNCTION_DISK;
function-enumerator = <2>;
color = <LED_COLOR_ID_GREEN>;
gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
};
led-5 {
function = LED_FUNCTION_DISK;
function-enumerator = <1>;
color = <LED_COLOR_ID_RED>;
gpios = <&gpio1 18 GPIO_ACTIVE_LOW>;
};
led-6 {
function = LED_FUNCTION_DISK;
function-enumerator = <2>;
color = <LED_COLOR_ID_RED>;
gpios = <&gpio1 19 GPIO_ACTIVE_LOW>;
};
led-7 {
function = LED_FUNCTION_INDICATOR;
color = <LED_COLOR_ID_BLUE>;
gpios = <&gpio1 20 GPIO_ACTIVE_HIGH>;
};
led-8 {
function = LED_FUNCTION_DISK_ERR;
color = <LED_COLOR_ID_RED>;
gpios = <&gpio1 21 GPIO_ACTIVE_LOW>;
};
led-9 {
function = LED_FUNCTION_DISK_ERR;
color = <LED_COLOR_ID_GREEN>;
gpios = <&gpio1 23 GPIO_ACTIVE_LOW>;
};
led-10 {
function = LED_FUNCTION_STATUS;
color = <LED_COLOR_ID_RED>;
gpios = <&gpio1 24 GPIO_ACTIVE_LOW>;
};
led-11 {
function = LED_FUNCTION_DISK;
function-enumerator = <1>;
color = <LED_COLOR_ID_GREEN>;
gpios = <&gpio1 25 GPIO_ACTIVE_LOW>;
};
led-12 {
function = LED_FUNCTION_STATUS;
color = <LED_COLOR_ID_GREEN>;
gpios = <&gpio1 26 GPIO_ACTIVE_LOW>;
};
};
};
&coherencyfab {
broken-idle;
};
&eth1 {
pinctrl-0 = <&ge1_rgmii_pins>;
pinctrl-names = "default";
status = "okay";
phy-handle = <&ethphy0>;
phy-connection-type = "rgmii-id";
};
&i2c0 {
pinctrl-0 = <&i2c0_pins>;
pinctrl-names = "default";
clock-frequency = <100000>;
status = "okay";
hwmon@2a {
compatible = "nuvoton,nct7802";
reg = <0x2a>;
};
rtc@30 {
compatible = "sii,s35390a";
reg = <0x30>;
};
};
&mdio {
pinctrl-0 = <&mdio_pins>;
pinctrl-names = "default";
ethphy0: ethernet-phy@0 { /* Marvell 88E1318 */
reg = <0>;
#thermal-sensor-cells = <0>;
};
};
&nand_controller {
status = "okay";
nand@0 {
reg = <0>;
label = "pxa3xx_nand-0";
nand-rb = <0>;
marvell,nand-keep-config;
nand-on-flash-bbt;
nand-ecc-strength = <4>;
nand-ecc-step-size = <512>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "uboot";
reg = <0x0000000 0x200000>;
read-only;
};
partition@200000 {
label = "certificate";
reg = <0x0200000 0x100000>;
read-only;
};
partition@300000 {
label = "preset_cfg";
reg = <0x0300000 0x100000>;
read-only;
};
partition@400000 {
label = "dev_params";
reg = <0x0400000 0x100000>;
read-only;
};
partition@500000 {
label = "active_bank";
reg = <0x0500000 0x0100000>;
};
partition@600000 {
label = "magic";
reg = <0x0600000 0x0100000>;
read-only;
};
partition@700000 {
label = "bank1";
reg = <0x0700000 0x2800000>;
};
partition@2f00000 {
label = "bank2";
reg = <0x2f00000 0x2800000>;
};
/* 0x5700000-0x5a00000 undefined in vendor firmware */
partition@5a00000 {
label = "reserved";
reg = <0x5a00000 0x2000000>;
};
partition@7a00000 {
label = "rootfs";
reg = <0x7a00000 0x8600000>;
};
};
};
};
&pciec {
status = "okay";
pcie@1,0 { /* Renesas uPD720202 USB 3.0 controller */
pinctrl-0 = <&pmx_pcie>;
pinctrl-names = "default";
status = "okay";
reset-gpios = <&gpio1 27 GPIO_ACTIVE_LOW>;
};
};
&pinctrl {
pmx_poweroff: pmx-poweroff {
marvell,pins = "mpp7";
marvell,function = "gpo";
};
pmx_power_cpu: pmx-power-cpu {
marvell,pins = "mpp4";
marvell,function = "vdd";
};
pmx_buttons: pmx-buttons {
marvell,pins = "mpp6", "mpp10", "mpp14", "mpp32";
marvell,function = "gpio";
};
pmx_leds1: pmx-leds1 {
marvell,pins = "mpp47";
marvell,function = "gpo";
};
pmx_leds2: pmx-leds2 {
marvell,pins = "mpp12", "mpp13", "mpp15", "mpp16", "mpp50", "mpp51",
"mpp52", "mpp53", "mpp55", "mpp56", "mpp57", "mpp58";
marvell,function = "gpio";
};
pmx_pcie: pmx-pcie {
marvell,pins = "mpp59";
marvell,function = "gpio";
};
pmx_beeper: pmx-beeper {
marvell,pins = "mpp63";
marvell,function = "gpio";
};
};
&pmsu {
pinctrl-0 = <&pmx_power_cpu>;
pinctrl-names = "default";
};
&rtc {
status = "disabled";
};
&sata {
nr-ports = <2>;
status = "okay";
#address-cells = <1>;
#size-cells = <0>;
hdd0_temp: sata-port@0 {
reg = <0>;
#thermal-sensor-cells = <0>;
};
hdd1_temp: sata-port@1 {
reg = <1>;
#thermal-sensor-cells = <0>;
};
};
&uart0 {
status = "okay";
};

3
arch/arm/boot/dts/armada-385-turris-omnia.dts
View File

@ -71,16 +71,19 @@
pcie@1,0 {
/* Port 0, Lane 0 */
status = "okay";
slot-power-limit-milliwatt = <10000>;
};
pcie@2,0 {
/* Port 1, Lane 0 */
status = "okay";
slot-power-limit-milliwatt = <10000>;
};
pcie@3,0 {
/* Port 2, Lane 0 */
status = "okay";
slot-power-limit-milliwatt = <10000>;
};
};
};

52
arch/arm/boot/dts/armada-385.dtsi
View File

@ -69,16 +69,25 @@
reg = <0x0800 0 0 0 0>;
#address-cells = <3>;
#size-cells = <2>;
interrupt-names = "intx";
interrupts-extended = <&gic GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
#interrupt-cells = <1>;
ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
0x81000000 0 0 0x81000000 0x1 0 1 0>;
bus-range = <0x00 0xff>;
interrupt-map-mask = <0 0 0 0>;
interrupt-map = <0 0 0 0 &gic GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
interrupt-map-mask = <0 0 0 7>;
interrupt-map = <0 0 0 1 &pcie1_intc 0>,
<0 0 0 2 &pcie1_intc 1>,
<0 0 0 3 &pcie1_intc 2>,
<0 0 0 4 &pcie1_intc 3>;
marvell,pcie-port = <0>;
marvell,pcie-lane = <0>;
clocks = <&gateclk 8>;
status = "disabled";
pcie1_intc: interrupt-controller {
interrupt-controller;
#interrupt-cells = <1>;
};
};
/* x1 port */
@ -88,16 +97,25 @@
reg = <0x1000 0 0 0 0>;
#address-cells = <3>;
#size-cells = <2>;
interrupt-names = "intx";
interrupts-extended = <&gic GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
#interrupt-cells = <1>;
ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0
0x81000000 0 0 0x81000000 0x2 0 1 0>;
bus-range = <0x00 0xff>;
interrupt-map-mask = <0 0 0 0>;
interrupt-map = <0 0 0 0 &gic GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
interrupt-map-mask = <0 0 0 7>;
interrupt-map = <0 0 0 1 &pcie2_intc 0>,
<0 0 0 2 &pcie2_intc 1>,
<0 0 0 3 &pcie2_intc 2>,
<0 0 0 4 &pcie2_intc 3>;
marvell,pcie-port = <1>;
marvell,pcie-lane = <0>;
clocks = <&gateclk 5>;
status = "disabled";
pcie2_intc: interrupt-controller {
interrupt-controller;
#interrupt-cells = <1>;
};
};
/* x1 port */
@ -107,16 +125,25 @@
reg = <0x1800 0 0 0 0>;
#address-cells = <3>;
#size-cells = <2>;
interrupt-names = "intx";
interrupts-extended = <&gic GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
#interrupt-cells = <1>;
ranges = <0x82000000 0 0 0x82000000 0x3 0 1 0
0x81000000 0 0 0x81000000 0x3 0 1 0>;
bus-range = <0x00 0xff>;
interrupt-map-mask = <0 0 0 0>;
interrupt-map = <0 0 0 0 &gic GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
interrupt-map-mask = <0 0 0 7>;
interrupt-map = <0 0 0 1 &pcie3_intc 0>,
<0 0 0 2 &pcie3_intc 1>,
<0 0 0 3 &pcie3_intc 2>,
<0 0 0 4 &pcie3_intc 3>;
marvell,pcie-port = <2>;
marvell,pcie-lane = <0>;
clocks = <&gateclk 6>;
status = "disabled";
pcie3_intc: interrupt-controller {
interrupt-controller;
#interrupt-cells = <1>;
};
};
/*
@ -129,16 +156,25 @@
reg = <0x2000 0 0 0 0>;
#address-cells = <3>;
#size-cells = <2>;
interrupt-names = "intx";
interrupts-extended = <&gic GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
#interrupt-cells = <1>;
ranges = <0x82000000 0 0 0x82000000 0x4 0 1 0
0x81000000 0 0 0x81000000 0x4 0 1 0>;
bus-range = <0x00 0xff>;
interrupt-map-mask = <0 0 0 0>;
interrupt-map = <0 0 0 0 &gic GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
interrupt-map-mask = <0 0 0 7>;
interrupt-map = <0 0 0 1 &pcie4_intc 0>,
<0 0 0 2 &pcie4_intc 1>,
<0 0 0 3 &pcie4_intc 2>,
<0 0 0 4 &pcie4_intc 3>;
marvell,pcie-port = <3>;
marvell,pcie-lane = <0>;
clocks = <&gateclk 7>;
status = "disabled";
pcie4_intc: interrupt-controller {
interrupt-controller;
#interrupt-cells = <1>;
};
};
};
};

26
arch/arm/boot/dts/aspeed-bmc-ampere-mtjade.dts
View File

@ -339,17 +339,8 @@
<&adc10mux 0>, <&adc10mux 1>,
<&adc11mux 0>, <&adc11mux 1>,
<&adc12mux 0>, <&adc12mux 1>,
<&adc13mux 0>, <&adc13mux 1>;
};
iio-hwmon-adc14 {
compatible = "iio-hwmon";
io-channels = <&adc 14>;
};
iio-hwmon-battery {
compatible = "iio-hwmon";
io-channels = <&adc 15>;
<&adc13mux 0>, <&adc13mux 1>,
<&adc 14>, <&adc 15>;
};
};
@ -362,6 +353,13 @@
/* spi-max-frequency = <50000000>; */
#include "openbmc-flash-layout-64.dtsi"
};
flash@1 {
status = "okay";
m25p,fast-read;
label = "alt-bmc";
#include "openbmc-flash-layout-64-alt.dtsi"
};
};
&spi1 {
@ -853,7 +851,7 @@
/*E0-E7*/ "","","","","","","","",
/*F0-F7*/ "","","BMC_SYS_PSON_L","S0_DDR_SAVE","PGOOD",
"S1_DDR_SAVE","","",
/*G0-G7*/ "S0_FW_BOOT_OK","SHD_REQ_L","","S0_OVERTEMP_L","","",
/*G0-G7*/ "host0-ready","SHD_REQ_L","","S0_OVERTEMP_L","","",
"","",
/*H0-H7*/ "","","","","PSU1_VIN_GOOD","PSU2_VIN_GOOD","","",
/*I0-I7*/ "PSU1_PRESENT","PSU2_PRESENT","S1_BMC_SPECIAL_BOOT",
@ -869,7 +867,7 @@
/*Q0-Q7*/ "","","","","","UID_BUTTON","","",
/*R0-R7*/ "","","BMC_EXT_HIGHTEMP_L","OCP_AUX_PWREN",
"OCP_MAIN_PWREN","RESET_BUTTON","","",
/*S0-S7*/ "","","","","RTC_BAT_SEN_EN","","","",
/*S0-S7*/ "","","","","rtc-battery-voltage-read-enable","","","",
/*T0-T7*/ "","","","","","","","",
/*U0-U7*/ "","","","","","","","",
/*V0-V7*/ "","","","","","","","",
@ -884,7 +882,7 @@
/*AC0-AC7*/ "SYS_PWR_GD","","","","","BMC_READY","SLAVE_PRESENT_L",
"BMC_OCP_PG";
i2c4_o_en {
i2c4-o-en-hog {
gpio-hog;
gpios = <ASPEED_GPIO(Y, 2) GPIO_ACTIVE_HIGH>;
output-high;

259
arch/arm/boot/dts/aspeed-bmc-asrock-romed8hm3.dts Normal file
View File

@ -0,0 +1,259 @@
// SPDX-License-Identifier: GPL-2.0+
/dts-v1/;
#include "aspeed-g5.dtsi"
#include <dt-bindings/gpio/aspeed-gpio.h>
#include <dt-bindings/interrupt-controller/irq.h>
/{
model = "ASRock ROMED8HM3 BMC v1.00";
compatible = "asrock,romed8hm3-bmc", "aspeed,ast2500";
aliases {
serial4 = &uart5;
};
chosen {
stdout-path = &uart5;
bootargs = "console=tty0 console=ttyS4,115200 earlycon";
};
memory@80000000 {
reg = <0x80000000 0x20000000>;
};
leds {
compatible = "gpio-leds";
heartbeat {
gpios = <&gpio ASPEED_GPIO(H, 6) GPIO_ACTIVE_LOW>;
linux,default-trigger = "timer";
};
system-fault {
gpios = <&gpio ASPEED_GPIO(Z, 2) GPIO_ACTIVE_LOW>;
panic-indicator;
};
};
iio-hwmon {
compatible = "iio-hwmon";
io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>,
<&adc 4>, <&adc 5>, <&adc 6>, <&adc 7>,
<&adc 8>, <&adc 9>, <&adc 10>, <&adc 11>,
<&adc 12>, <&adc 13>, <&adc 14>, <&adc 15>;
};
};
&fmc {
status = "okay";
flash@0 {
status = "okay";
m25p,fast-read;
label = "bmc";
spi-max-frequency = <100000000>; /* 100 MHz */
#include "openbmc-flash-layout-64.dtsi"
};
};
&uart5 {
status = "okay";
};
&vuart {
status = "okay";
aspeed,lpc-io-reg = <0x2f8>;
aspeed,lpc-interrupts = <3 IRQ_TYPE_LEVEL_HIGH>;
};
&mac0 {
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_rgmii1_default &pinctrl_mdio1_default>;
};
&i2c0 {
status = "okay";
/* inlet temp sensor */
w83773g@4c {
compatible = "nuvoton,w83773g";
reg = <0x4c>;
};
};
&i2c1 {
status = "okay";
};
&i2c2 {
status = "okay";
/* IPB temp sensor */
w83773g@4c {
compatible = "nuvoton,w83773g";
reg = <0x4c>;
};
/* IPB PMIC */
lm25066@40 {
compatible = "lm25066";
reg = <0x40>;
};
/* 12VSB PMIC */
lm25066@41 {
compatible = "lm25066";
reg = <0x41>;
};
};
&i2c4 {
status = "okay";
};
&i2c5 {
status = "okay";
};
&i2c6 {
status = "okay";
};
&i2c7 {
status = "okay";
/* Baseboard FRU eeprom */
eeprom@50 {
compatible = "st,24c128", "atmel,24c128";
reg = <0x50>;
pagesize = <16>;
};
};
&i2c8 {
status = "okay";
};
&i2c9 {
status = "okay";
};
&video {
status = "okay";
};
&vhub {
status = "okay";
};
&lpc_ctrl {
status = "okay";
};
&lpc_snoop {
status = "okay";
snoop-ports = <0x80>;
};
&kcs3 {
status = "okay";
aspeed,lpc-io-reg = <0xca2>;
};
&pwm_tacho {
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_pwm3_default
&pinctrl_pwm4_default
&pinctrl_pwm5_default
&pinctrl_pwm6_default>;
fan@3 {
reg = <0x03>;
aspeed,fan-tach-ch = /bits/ 8 <0x03 0x0b>;
};
fan@4 {
reg = <0x04>;
aspeed,fan-tach-ch = /bits/ 8 <0x04 0x0c>;
};
fan@5 {
reg = <0x05>;
aspeed,fan-tach-ch = /bits/ 8 <0x05 0x0d>;
};
fan@6 {
reg = <0x06>;
aspeed,fan-tach-ch = /bits/ 8 <0x06 0x0e>;
};
};
&gpio {
status = "okay";
gpio-line-names =
/* A */ "LOCATORLED_STATUS_N", "BMC_MAC2_INTB", "NMI_BTN_N", "BMC_NMI",
"", "", "", "",
/* B */ "DDR_MEM_TEMP", "", "", "", "", "", "", "",
/* C */ "", "", "", "", "PCIE_HP_SEL_N", "PCIE_SATA_SEL_N", "LOCATORBTN", "",
/* D */ "BMC_PSIN", "BMC_PSOUT", "BMC_RESETCON", "RESETCON",
"", "", "", "PSU_FAN_FAIL_N",
/* E */ "", "", "", "", "", "", "", "",
/* F */ "NIC_PWR_GOOD", "PRSNTB0", "PRSNTB1", "PRSNTB2",
"PRSNTB3", "", "3VSB_PCIE1_PG", "12V_PCIE1_PG",
/* G */ "HWM_BAT_EN", "CHASSIS_ID0", "CHASSIS_ID1", "CHASSIS_ID2",
"BMC_ALERT1_N_R", "BMC_ALERT2_N_R", "BMC_ALERT3_N", "BMC_ALERT4_N",
/* H */ "X24_C1_PRSNT", "X24_C2_PRSNT", "X24_C3_PRSNT", "FM_MEM_THERM_EVENT_BMC_R_N",
"FACMODE", "BMC_RTCRST", "BMC_HB_LED_N", "BMC_CASEOPEN",
/* I */ "", "", "", "", "", "", "", "",
/* J */ "BMC_READY", "BMC_PCH_BIOS_CS_N", "", "P0_MA_DDR_QS_CS_N",
"", "", "", "",
/* K */ "", "", "", "", "", "", "", "",
/* L */ "", "", "", "", "", "", "", "",
/* M */ "", "", "MEZZ_PWRBRK_N", "OCP_HP_RST_EN",
"MAIN_PWR_EN_G", "BMC_MAIN_EN", "AUX_PWR_EN_G", "BMC_AUX_EN",
/* N */ "", "", "", "", "", "", "", "",
/* O */ "", "", "", "", "", "", "", "",
/* P */ "", "", "", "", "", "", "", "",
/* Q */ "", "", "", "",
"BMC_SMB_PRESENT_1_N", "BMC_SMB_PRESENT_2_N",
"BMC_SMB_PRESENT_3_N", "BMC_PCIE_WAKE_N",
/* R */ "", "", "THERMALTRIP_CLEAR_N", "", "", "", "", "",
/* S */ "", "", "", "", "", "", "", "",
/* T */ "", "", "", "", "", "", "", "",
/* U */ "", "", "", "", "", "", "", "",
/* V */ "", "", "", "", "", "", "", "",
/* W */ "", "", "", "", "", "", "", "",
/* X */ "", "", "", "", "", "", "", "",
/* Y */ "SLP_S3", "SLP_S4_S5", "NODE_ID_1", "NODE_ID_2", "", "", "", "",
/* Z */ "", "", "SYSTEM_FAULT_LED_N", "FAST_THROTTLE_N",
"", "", "", "",
/* AA */ "FM_CPU0_IBMC_THERMTRIP_N", "", "PROCHOT_L_G", "",
"", "", "", "",
/* AB */ "BMC_FORCE_SELFREFRESH", "PWRGD_OUT", "", "IRQ_BMC_PCH_SMI_LPC_N",
"", "", "", "",
/* AC */ "", "", "", "", "", "", "", "";
};
&adc {
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_adc0_default
&pinctrl_adc1_default
&pinctrl_adc2_default
&pinctrl_adc3_default
&pinctrl_adc4_default
&pinctrl_adc5_default
&pinctrl_adc6_default
&pinctrl_adc7_default
&pinctrl_adc8_default
&pinctrl_adc9_default
&pinctrl_adc10_default
&pinctrl_adc11_default
&pinctrl_adc12_default
&pinctrl_adc13_default
&pinctrl_adc14_default
&pinctrl_adc15_default>;
};

362
arch/arm/boot/dts/aspeed-bmc-facebook-bletchley.dts
View File

@ -5,6 +5,8 @@
#include "aspeed-g6.dtsi"
#include <dt-bindings/gpio/aspeed-gpio.h>
#include <dt-bindings/usb/pd.h>
#include <dt-bindings/leds/leds-pca955x.h>
#include <dt-bindings/interrupt-controller/irq.h>
/ {
model = "Facebook Bletchley BMC";
@ -31,7 +33,7 @@
<&adc1 4>, <&adc1 5>, <&adc1 6>, <&adc1 7>;
};
spi_gpio: spi-gpio {
spi1_gpio: spi1-gpio {
compatible = "spi-gpio";
#address-cells = <1>;
#size-cells = <0>;
@ -49,119 +51,165 @@
};
};
spi2_gpio: spi2-gpio {
compatible = "spi-gpio";
#address-cells = <1>;
#size-cells = <0>;
gpio-sck = <&gpio0 ASPEED_GPIO(X, 3) GPIO_ACTIVE_HIGH>;
gpio-mosi = <&gpio0 ASPEED_GPIO(X, 4) GPIO_ACTIVE_HIGH>;
gpio-miso = <&gpio0 ASPEED_GPIO(X, 5) GPIO_ACTIVE_HIGH>;
num-chipselects = <1>;
cs-gpios = <&gpio0 ASPEED_GPIO(X, 0) GPIO_ACTIVE_LOW>;
flash@0 {
reg = <0>;
compatible = "jedec,spi-nor";
m25p,fast-read;
label = "pnor";
spi-max-frequency = <100000000>;
};
};
switchphy: ethernet-phy@0 {
// Fixed link
};
leds {
front_gpio_leds {
compatible = "gpio-leds";
sys_log_id {
retain-state-shutdown;
default-state = "keep";
default-state = "off";
gpios = <&front_leds 0 GPIO_ACTIVE_HIGH>;
};
};
fan_gpio_leds {
compatible = "gpio-leds";
fan0_blue {
retain-state-shutdown;
default-state = "on";
gpios = <&fan_ioexp 8 GPIO_ACTIVE_HIGH>;
gpios = <&fan_leds 8 GPIO_ACTIVE_HIGH>;
};
fan1_blue {
retain-state-shutdown;
default-state = "on";
gpios = <&fan_ioexp 9 GPIO_ACTIVE_HIGH>;
gpios = <&fan_leds 9 GPIO_ACTIVE_HIGH>;
};
fan2_blue {
retain-state-shutdown;
default-state = "on";
gpios = <&fan_ioexp 10 GPIO_ACTIVE_HIGH>;
gpios = <&fan_leds 10 GPIO_ACTIVE_HIGH>;
};
fan3_blue {
retain-state-shutdown;
default-state = "on";
gpios = <&fan_ioexp 11 GPIO_ACTIVE_HIGH>;
gpios = <&fan_leds 11 GPIO_ACTIVE_HIGH>;
};
fan0_amber {
retain-state-shutdown;
default-state = "off";
gpios = <&fan_ioexp 12 GPIO_ACTIVE_HIGH>;
gpios = <&fan_leds 12 GPIO_ACTIVE_HIGH>;
};
fan1_amber {
retain-state-shutdown;
default-state = "off";
gpios = <&fan_ioexp 13 GPIO_ACTIVE_HIGH>;
gpios = <&fan_leds 13 GPIO_ACTIVE_HIGH>;
};
fan2_amber {
retain-state-shutdown;
default-state = "off";
gpios = <&fan_ioexp 14 GPIO_ACTIVE_HIGH>;
gpios = <&fan_leds 14 GPIO_ACTIVE_HIGH>;
};
fan3_amber {
retain-state-shutdown;
default-state = "off";
gpios = <&fan_ioexp 15 GPIO_ACTIVE_HIGH>;
};
sled0_amber {
retain-state-shutdown;
default-state = "off";
gpios = <&sled0_leds 0 GPIO_ACTIVE_LOW>;
};
sled0_blue {
retain-state-shutdown;
default-state = "off";
gpios = <&sled0_leds 1 GPIO_ACTIVE_LOW>;
gpios = <&fan_leds 15 GPIO_ACTIVE_HIGH>;
};
};
sled1_gpio_leds {
compatible = "gpio-leds";
sled1_amber {
retain-state-shutdown;
default-state = "off";
default-state = "keep";
gpios = <&sled1_leds 0 GPIO_ACTIVE_LOW>;
};
sled1_blue {
retain-state-shutdown;
default-state = "off";
default-state = "keep";
gpios = <&sled1_leds 1 GPIO_ACTIVE_LOW>;
};
};
sled2_gpio_leds {
compatible = "gpio-leds";
sled2_amber {
retain-state-shutdown;
default-state = "off";
default-state = "keep";
gpios = <&sled2_leds 0 GPIO_ACTIVE_LOW>;
};
sled2_blue {
retain-state-shutdown;
default-state = "off";
default-state = "keep";
gpios = <&sled2_leds 1 GPIO_ACTIVE_LOW>;
};
};
sled3_gpio_leds {
compatible = "gpio-leds";
sled3_amber {
retain-state-shutdown;
default-state = "off";
default-state = "keep";
gpios = <&sled3_leds 0 GPIO_ACTIVE_LOW>;
};
sled3_blue {
retain-state-shutdown;
default-state = "off";
default-state = "keep";
gpios = <&sled3_leds 1 GPIO_ACTIVE_LOW>;
};
};
sled4_gpio_leds {
compatible = "gpio-leds";
sled4_amber {
retain-state-shutdown;
default-state = "off";
default-state = "keep";
gpios = <&sled4_leds 0 GPIO_ACTIVE_LOW>;
};
sled4_blue {
retain-state-shutdown;
default-state = "off";
default-state = "keep";
gpios = <&sled4_leds 1 GPIO_ACTIVE_LOW>;
};
};
sled5_gpio_leds {
compatible = "gpio-leds";
sled5_amber {
retain-state-shutdown;
default-state = "off";
default-state = "keep";
gpios = <&sled5_leds 0 GPIO_ACTIVE_LOW>;
};
sled5_blue {
retain-state-shutdown;
default-state = "off";
default-state = "keep";
gpios = <&sled5_leds 1 GPIO_ACTIVE_LOW>;
};
};
sled6_gpio_leds {
compatible = "gpio-leds";
sled6_amber {
retain-state-shutdown;
default-state = "keep";
gpios = <&sled6_leds 0 GPIO_ACTIVE_LOW>;
};
sled6_blue {
retain-state-shutdown;
default-state = "keep";
gpios = <&sled6_leds 1 GPIO_ACTIVE_LOW>;
};
};
};
&mac2 {
@ -177,10 +225,6 @@
};
};
&rtc {
status = "okay";
};
&fmc {
status = "okay";
flash@0 {
@ -190,88 +234,22 @@
spi-max-frequency = <50000000>;
#include "openbmc-flash-layout-128.dtsi"
};
};
&spi2 {
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_spi2_default>;
flash@0 {
flash@1 {
status = "okay";
m25p,fast-read;
label = "pnor";
spi-max-frequency = <100000000>;
label = "flash1";
spi-max-frequency = <50000000>;
};
};
&i2c0 {
status = "okay";
/* TODO: Add ADC INA230 */
mp5023@40 {
compatible = "mps,mp5023";
reg = <0x40>;
ina230@45 {
compatible = "ti,ina230";
reg = <0x45>;
shunt-resistor = <2000>;
};
tmp421@4f {
compatible = "ti,tmp421";
reg = <0x4f>;
};
sled0_ioexp: pca9539@76 {
compatible = "nxp,pca9539";
reg = <0x76>;
#address-cells = <1>;
#size-cells = <0>;
gpio-controller;
#gpio-cells = <2>;
gpio-line-names =
"SLED0_MS_DETECT1","SLED0_VBUS_BMC_EN","SLED0_INA230_ALERT","SLED0_P12V_STBY_ALERT",
"SLED0_SSD_ALERT","SLED0_MS_DETECT0","SLED0_RST_CCG5","SLED0_FUSB302_INT",
"SLED0_MD_STBY_RESET","SLED0_MD_IOEXP_EN_FAULT","SLED0_MD_DIR","SLED0_MD_DECAY",
"SLED0_MD_MODE1","SLED0_MD_MODE2","SLED0_MD_MODE3","power-host0";
};
sled0_leds: pca9552@67 {
compatible = "nxp,pca9552";
reg = <0x67>;
#address-cells = <1>;
#size-cells = <0>;
gpio-controller;
#gpio-cells = <2>;
gpio-line-names =
"led-sled0-amber","led-sled0-blue","SLED0_RST_IOEXP","",
"","","","",
"","","","",
"","","","";
};
sled0_fusb302: typec-portc@22 {
compatible = "fcs,fusb302";
reg = <0x22>;
connector {
compatible = "usb-c-connector";
label = "USB-C";
power-role = "dual";
try-power-role = "sink";
data-role = "dual";
source-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>;
sink-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)
PDO_VAR(3000, 12000, 3000)
PDO_PPS_APDO(3000, 11000, 3000)>;
op-sink-microwatt = <10000000>;
};
};
};
&i2c1 {
status = "okay";
/* TODO: Add ADC INA230 */
mp5023@40 {
compatible = "mps,mp5023";
reg = <0x40>;
@ -290,6 +268,9 @@
gpio-controller;
#gpio-cells = <2>;
interrupt-parent = <&gpio0>;
interrupts = <ASPEED_GPIO(M, 0) IRQ_TYPE_LEVEL_LOW>;
gpio-line-names =
"SLED1_MS_DETECT1","SLED1_VBUS_BMC_EN","SLED1_INA230_ALERT","SLED1_P12V_STBY_ALERT",
"SLED1_SSD_ALERT","SLED1_MS_DETECT0","SLED1_RST_CCG5","SLED1_FUSB302_INT",
@ -306,7 +287,7 @@
#gpio-cells = <2>;
gpio-line-names =
"led-sled1-amber","led-sled1-blue","SLED1_RST_IOEXP","",
"led-sled1-amber","led-sled1-blue","SLED1_RST_IOEXP","SLED1_MD_REF_PWM",
"","","","",
"","","","",
"","","","";
@ -333,11 +314,11 @@
&i2c1 {
status = "okay";
};
&i2c2 {
status = "okay";
/* TODO: Add ADC INA230 */
ina230@45 {
compatible = "ti,ina230";
reg = <0x45>;
shunt-resistor = <2000>;
};
mp5023@40 {
compatible = "mps,mp5023";
@ -357,6 +338,9 @@
gpio-controller;
#gpio-cells = <2>;
interrupt-parent = <&gpio0>;
interrupts = <ASPEED_GPIO(M, 1) IRQ_TYPE_LEVEL_LOW>;
gpio-line-names =
"SLED2_MS_DETECT1","SLED2_VBUS_BMC_EN","SLED2_INA230_ALERT","SLED2_P12V_STBY_ALERT",
"SLED2_SSD_ALERT","SLED2_MS_DETECT0","SLED2_RST_CCG5","SLED2_FUSB302_INT",
@ -373,7 +357,7 @@
#gpio-cells = <2>;
gpio-line-names =
"led-sled2-amber","led-sled2-blue","SLED2_RST_IOEXP","",
"led-sled2-amber","led-sled2-blue","SLED2_RST_IOEXP","SLED2_MD_REF_PWM",
"","","","",
"","","","",
"","","","";
@ -398,9 +382,13 @@
};
};
&i2c3 {
&i2c2 {
status = "okay";
/* TODO: Add ADC INA230 */
ina230@45 {
compatible = "ti,ina230";
reg = <0x45>;
shunt-resistor = <2000>;
};
mp5023@40 {
compatible = "mps,mp5023";
@ -420,6 +408,9 @@
gpio-controller;
#gpio-cells = <2>;
interrupt-parent = <&gpio0>;
interrupts = <ASPEED_GPIO(M, 2) IRQ_TYPE_LEVEL_LOW>;
gpio-line-names =
"SLED3_MS_DETECT1","SLED3_VBUS_BMC_EN","SLED3_INA230_ALERT","SLED3_P12V_STBY_ALERT",
"SLED3_SSD_ALERT","SLED3_MS_DETECT0","SLED3_RST_CCG5","SLED3_FUSB302_INT",
@ -436,7 +427,7 @@
#gpio-cells = <2>;
gpio-line-names =
"led-sled3-amber","led-sled3-blue","SLED3_RST_IOEXP","",
"led-sled3-amber","led-sled3-blue","SLED3_RST_IOEXP","SLED3_MD_REF_PWM",
"","","","",
"","","","",
"","","","";
@ -461,9 +452,13 @@
};
};
&i2c4 {
&i2c3 {
status = "okay";
/* TODO: Add ADC INA230 */
ina230@45 {
compatible = "ti,ina230";
reg = <0x45>;
shunt-resistor = <2000>;
};
mp5023@40 {
compatible = "mps,mp5023";
@ -483,6 +478,9 @@
gpio-controller;
#gpio-cells = <2>;
interrupt-parent = <&gpio0>;
interrupts = <ASPEED_GPIO(M, 3) IRQ_TYPE_LEVEL_LOW>;
gpio-line-names =
"SLED4_MS_DETECT1","SLED4_VBUS_BMC_EN","SLED4_INA230_ALERT","SLED4_P12V_STBY_ALERT",
"SLED4_SSD_ALERT","SLED4_MS_DETECT0","SLED4_RST_CCG5","SLED4_FUSB302_INT",
@ -499,7 +497,7 @@
#gpio-cells = <2>;
gpio-line-names =
"led-sled4-amber","led-sled4-blue","SLED4_RST_IOEXP","",
"led-sled4-amber","led-sled4-blue","SLED4_RST_IOEXP","SLED4_MD_REF_PWM",
"","","","",
"","","","",
"","","","";
@ -524,9 +522,13 @@
};
};
&i2c5 {
&i2c4 {
status = "okay";
/* TODO: Add ADC INA230 */
ina230@45 {
compatible = "ti,ina230";
reg = <0x45>;
shunt-resistor = <2000>;
};
mp5023@40 {
compatible = "mps,mp5023";
@ -546,6 +548,9 @@
gpio-controller;
#gpio-cells = <2>;
interrupt-parent = <&gpio0>;
interrupts = <ASPEED_GPIO(M, 4) IRQ_TYPE_LEVEL_LOW>;
gpio-line-names =
"SLED5_MS_DETECT1","SLED5_VBUS_BMC_EN","SLED5_INA230_ALERT","SLED5_P12V_STBY_ALERT",
"SLED5_SSD_ALERT","SLED5_MS_DETECT0","SLED5_RST_CCG5","SLED5_FUSB302_INT",
@ -562,7 +567,7 @@
#gpio-cells = <2>;
gpio-line-names =
"led-sled5-amber","led-sled5-blue","SLED5_RST_IOEXP","",
"led-sled5-amber","led-sled5-blue","SLED5_RST_IOEXP","SLED5_MD_REF_PWM",
"","","","",
"","","","",
"","","","";
@ -587,6 +592,76 @@
};
};
&i2c5 {
status = "okay";
ina230@45 {
compatible = "ti,ina230";
reg = <0x45>;
shunt-resistor = <2000>;
};
mp5023@40 {
compatible = "mps,mp5023";
reg = <0x40>;
};
tmp421@4f {
compatible = "ti,tmp421";
reg = <0x4f>;
};
sled6_ioexp: pca9539@76 {
compatible = "nxp,pca9539";
reg = <0x76>;
#address-cells = <1>;
#size-cells = <0>;
gpio-controller;
#gpio-cells = <2>;
interrupt-parent = <&gpio0>;
interrupts = <ASPEED_GPIO(M, 5) IRQ_TYPE_LEVEL_LOW>;
gpio-line-names =
"SLED6_MS_DETECT1","SLED6_VBUS_BMC_EN","SLED6_INA230_ALERT","SLED6_P12V_STBY_ALERT",
"SLED6_SSD_ALERT","SLED6_MS_DETECT0","SLED6_RST_CCG5","SLED6_FUSB302_INT",
"SLED6_MD_STBY_RESET","SLED6_MD_IOEXP_EN_FAULT","SLED6_MD_DIR","SLED6_MD_DECAY",
"SLED6_MD_MODE1","SLED6_MD_MODE2","SLED6_MD_MODE3","power-host6";
};
sled6_leds: pca9552@67 {
compatible = "nxp,pca9552";
reg = <0x67>;
#address-cells = <1>;
#size-cells = <0>;
gpio-controller;
#gpio-cells = <2>;
gpio-line-names =
"led-sled6-amber","led-sled6-blue","SLED6_RST_IOEXP","SLED6_MD_REF_PWM",
"","","","",
"","","","",
"","","","";
};
sled6_fusb302: typec-portc@22 {
compatible = "fcs,fusb302";
reg = <0x22>;
connector {
compatible = "usb-c-connector";
label = "USB-C";
power-role = "dual";
try-power-role = "sink";
data-role = "dual";
source-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>;
sink-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)
PDO_VAR(3000, 12000, 3000)
PDO_PPS_APDO(3000, 11000, 3000)>;
op-sink-microwatt = <10000000>;
};
};
};
&i2c6 {
status = "okay";
@ -596,6 +671,7 @@
};
rtc@51 {
/* in-chip rtc disabled, use external rtc (battery-backed) */
compatible = "nxp,pcf85263";
reg = <0x51>;
};
@ -655,6 +731,7 @@
adm1278@11 {
compatible = "adi,adm1278";
reg = <0x11>;
shunt-resistor-micro-ohms = <300>;
};
tmp421@4c {
@ -667,7 +744,7 @@
reg = <0x4d>;
};
fan_ioexp: pca9552@67 {
fan_leds: pca9552@67 {
compatible = "nxp,pca9552";
reg = <0x67>;
#address-cells = <1>;
@ -700,36 +777,38 @@
/*D0-D7*/ "","","","","","","","",
/*E0-E7*/ "","","","","","","","",
/*F0-F7*/ "","","","","","","","",
/*G0-G7*/ "","SWITCH_FRU_MUX","","","","","","",
/*G0-G7*/ "BSM_FRU_WP","SWITCH_FRU_MUX","","",
"PWRGD_P1V05_VDDCORE","PWRGD_P1V5_VDD","","",
/*H0-H7*/ "presence-riser1","presence-riser2",
"presence-sled0","presence-sled1",
"presence-sled2","presence-sled3",
"presence-sled4","presence-sled5",
"presence-sled1","presence-sled2",
"presence-sled3","presence-sled4",
"presence-sled5","presence-sled6",
/*I0-I7*/ "REV_ID0","","REV_ID1","REV_ID2",
"","","","",
"","BSM_FLASH_WP_STATUS","BMC_TPM_PRES","",
/*J0-J7*/ "","","","","","","","",
/*K0-K7*/ "","","","","","","","",
/*L0-L7*/ "","","","","","","","",
/*M0-M7*/ "ALERT_SLED0","ALERT_SLED1",
"ALERT_SLED2","ALERT_SLED3",
"ALERT_SLED4","ALERT_SLED5",
/*L0-L7*/ "","","","","","BMC_RTC_INT","","",
/*M0-M7*/ "ALERT_SLED1","ALERT_SLED2",
"ALERT_SLED3","ALERT_SLED4",
"ALERT_SLED5","ALERT_SLED6",
"P12V_AUX_ALERT1","",
/*N0-N7*/ "","","","","","","","",
/*O0-O7*/ "","","","",
"","BOARD_ID0","BOARD_ID1","BOARD_ID2",
/*P0-P7*/ "","","","","","","","",
/*P0-P7*/ "","","","","","","","BMC_HEARTBEAT",
/*Q0-Q7*/ "","","","","","","","",
/*R0-R7*/ "","","","","","","","",
/*S0-S7*/ "","","","BAT_DETECT",
"BMC_BT_WP0","BMC_BT_WP1","","",
/*T0-T7*/ "","","","","","","","",
/*U0-U7*/ "","","","","","","","",
/*V0-V7*/ "","RST_BMC_MVL","","",
/*V0-V7*/ "PWRGD_CNS_PSU","RST_BMC_MVL","","PSU_PRSNT",
"USB2_SEL0_A","USB2_SEL1_A",
"USB2_SEL0_B","USB2_SEL1_B",
/*W0-W7*/ "RST_FRONT_IOEXP","","","","","","","",
/*X0-X7*/ "","","","","","","","",
/*Y0-Y7*/ "","","BSM_FLASH_LATCH","","","","","",
/*Y0-Y7*/ "BMC_SELF_HW_RST","BSM_PRSNT","BSM_FLASH_LATCH","",
"","","","",
/*Z0-Z7*/ "","","","","","","","";
};
@ -754,3 +833,8 @@
&pinctrl_adc12_default &pinctrl_adc13_default
&pinctrl_adc14_default &pinctrl_adc15_default>;
};
&mdio3 {
status = "okay";
/* TODO: Add Marvell 88X3310 */
};

11
arch/arm/boot/dts/aspeed-bmc-ibm-everest.dts
View File

@ -171,9 +171,10 @@
/* 48MB region from the end of flash to start of vga memory */
ramoops@bc000000 {
compatible = "ramoops";
reg = <0xbc000000 0x180000>; /* 16 * (3 * 0x8000) */
reg = <0xbc000000 0x200000>; /* 16 * (4 * 0x8000) */
record-size = <0x8000>;
console-size = <0x8000>;
ftrace-size = <0x8000>;
pmsg-size = <0x8000>;
max-reason = <3>; /* KMSG_DUMP_EMERG */
};
@ -269,9 +270,7 @@
/*C0-C7*/ "","","","","","","","",
/*D0-D7*/ "","","","","","","","",
/*E0-E7*/ "","","","","","","","",
/*F0-F7*/ "PIN_HOLE_RESET_IN_N","","",
"PIN_HOLE_RESET_OUT_N","","",
"factory-reset-toggle","",
/*F0-F7*/ "","","rtc-battery-voltage-read-enable","reset-cause-pinhole","","","factory-reset-toggle","",
/*G0-G7*/ "","","","","","","","",
/*H0-H7*/ "led-rtc-battery","led-bmc","led-rear-enc-id0","led-rear-enc-fault0","","","","",
/*I0-I7*/ "","","","","","","bmc-secure-boot","",
@ -2394,6 +2393,10 @@
status = "okay";
};
&uhci {
status = "okay";
};
&emmc_controller {
status = "okay";
};

33
arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts
View File

@ -102,9 +102,10 @@
ramoops@bc000000 {
compatible = "ramoops";
reg = <0xbc000000 0x180000>; /* 16 * (3 * 0x8000) */
reg = <0xbc000000 0x200000>; /* 16 * (4 * 0x8000) */
record-size = <0x8000>;
console-size = <0x8000>;
ftrace-size = <0x8000>;
pmsg-size = <0x8000>;
max-reason = <3>; /* KMSG_DUMP_EMERG */
};
@ -239,6 +240,10 @@
status = "okay";
};
&uhci {
status = "okay";
};
&gpio0 {
gpio-line-names =
/*A0-A7*/ "","","","","","","","",
@ -246,7 +251,7 @@
/*C0-C7*/ "","","","","","","","",
/*D0-D7*/ "","","","","","","","",
/*E0-E7*/ "","","","","","","","",
/*F0-F7*/ "","","","","","","factory-reset-toggle","",
/*F0-F7*/ "","","rtc-battery-voltage-read-enable","reset-cause-pinhole","","","factory-reset-toggle","",
/*G0-G7*/ "","","","","","","","",
/*H0-H7*/ "","bmc-ingraham0","rear-enc-id0","rear-enc-fault0","","","","",
/*I0-I7*/ "","","","","","","bmc-secure-boot","",
@ -2360,30 +2365,6 @@
use-ncsi;
};
&fmc {
status = "okay";
flash@0 {
status = "okay";
m25p,fast-read;
label = "bmc";
spi-max-frequency = <50000000>;
#include "openbmc-flash-layout-128.dtsi"
};
};
&spi1 {
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_spi1_default>;
flash@0 {
status = "okay";
m25p,fast-read;
label = "pnor";
spi-max-frequency = <100000000>;
};
};
&wdt1 {
aspeed,reset-type = "none";
aspeed,external-signal;

12
arch/arm/boot/dts/aspeed-bmc-opp-tacoma.dts
View File

@ -197,7 +197,6 @@
fsi-routing-gpios = <&gpio0 ASPEED_GPIO(Q, 7) GPIO_ACTIVE_HIGH>;
fsi-mux-gpios = <&gpio0 ASPEED_GPIO(B, 0) GPIO_ACTIVE_HIGH>;
cfam-reset-gpios = <&gpio0 ASPEED_GPIO(Q, 0) GPIO_ACTIVE_LOW>;
cfam@0,0 {
reg = <0 0>;
@ -877,3 +876,14 @@
status = "okay";
memory-region = <&vga_memory>;
};
&kcs2 {
status = "okay";
aspeed,lpc-io-reg = <0xca8 0xcac>;
};
&kcs3 {
status = "okay";
aspeed,lpc-io-reg = <0xca2>;
aspeed,lpc-interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
};

610
arch/arm/boot/dts/aspeed-bmc-quanta-s6q.dts Normal file
View File

@ -0,0 +1,610 @@
// SPDX-License-Identifier: GPL-2.0-or-later
// Copyright 2022 Quanta Corp.
/dts-v1/;
#include "aspeed-g6.dtsi"
#include <dt-bindings/gpio/aspeed-gpio.h>
#include <dt-bindings/i2c/i2c.h>
/ {
model = "Quanta S6Q BMC";
compatible = "quanta,s6q-bmc", "aspeed,ast2600";
aliases {
// bus 0
i2c20 = &SMB_HOST_DB2000_3V3AUX_SCL;
i2c21 = &U12_PCA9546_CH1;
i2c22 = &SMB_HOST_DB800_B_SCL;
i2c23 = &SMB_HOST_DB800_C_SCL;
// bus 1
i2c24 = &SMB_M2_P0_1V8AUX_SCL;
i2c25 = &SMB_M2_P1_1V8AUX_SCL;
i2c26 = &SMB_CPU_PIROM_3V3AUX_SCL;
i2c27 = &SMB_TEMP_3V3AUX_SCL;
i2c28 = &SMB_IPMB_3V3AUX_SSDSB_SCL;
i2c29 = &SMB_IPMB_3V3AUX_SCL;
i2c31 = &SMB_FB_SCL;
// bus 1 - Fan board
i2c32 = &SMB_IOEXP_SCL;
i2c33 = &SMB_PROGRAM_SCL;
i2c34 = &SMB_FB_SCL_CH2;
i2c35 = &SMB_FAN_SENSE_SCL;
// bus 6
i2c36 = &U197_PCA9546_CH0;
i2c37 = &U197_PCA9546_CH1;
i2c38 = &U197_PCA9546_CH2;
i2c39 = &U197_PCA9546_CH3;
//bus 7
i2c40 = &SMB_OCP_SFF_3V3AUX_SCL; //OCP1
i2c41 = &SMB_OCP_LFF_3V3AUX_SCL; //OCP2
};
chosen {
stdout-path = &uart5;
bootargs = "console=ttyS4,115200n8 earlycon";
};
memory@80000000 {
device_type = "memory";
reg = <0x80000000 0x40000000>;
};
iio-hwmon {
compatible = "iio-hwmon";
io-channels = <&adc0 0>, <&adc0 1>, <&adc0 2>, <&adc0 3>,
<&adc0 4>, <&adc0 5>, <&adc0 6>, <&adc0 7>,
<&adc1 0>, <&adc1 1>, <&adc1 2>, <&adc1 3>,
<&adc1 4>, <&adc1 5>, <&adc1 6>, <&adc1 7>;
};
leds {
compatible = "gpio-leds";
BMC_HEARTBEAT_N {
label="BMC_HEARTBEAT_N";
gpios = <&gpio0 ASPEED_GPIO(P, 7) GPIO_ACTIVE_LOW>;
linux,default-trigger = "heartbeat";
};
BMC_LED_STATUS_AMBER_N {
label="BMC_LED_STATUS_AMBER_N";
gpios = <&gpio0 ASPEED_GPIO(S, 6) GPIO_ACTIVE_LOW>;
default-state = "off";
};
FM_ID_LED_N {
label="FM_ID_LED_N";
gpios = <&gpio0 ASPEED_GPIO(B, 5) GPIO_ACTIVE_LOW>;
default-state = "off";
};
};
};
&gpio0 {
gpio-line-names =
/*A0 - A7*/ "", "", "", "", "", "", "", "",
/*B0 - B7*/ "", "", "", "", "", "", "", "",
/*C0 - C7*/ "", "", "", "", "", "", "", "",
/*D0 - D7*/ "", "", "", "", "", "", "", "",
/*E0 - E7*/ "", "", "", "", "", "", "", "",
/*F0 - F7*/ "PLTRST_N", "", "PWR_DEBUG_N", "", "", "", "", "",
/*G0 - G7*/ "", "", "", "", "", "", "", "",
/*H0 - H7*/ "", "", "", "", "", "", "", "",
/*I0 - I7*/ "", "", "", "", "", "", "", "",
/*J0 - J7*/ "", "", "", "", "", "", "", "",
/*K0 - K7*/ "", "", "", "", "", "", "", "",
/*L0 - L7*/ "", "", "", "", "PREQ_N", "TCK_MUX_SEL", "", "",
/*M0 - M7*/ "", "", "", "PWRGD_SYS_PWROK", "", "PRDY_N", "", "",
/*N0 - N7*/ "", "", "", "", "", "", "", "",
/*O0 - O7*/ "", "", "", "", "", "", "", "",
/*P0 - P7*/ "SYS_BMC_PWRBTN_R_N", "SYS_PWRBTN_N", "FM_MB_RST_BTN", "RST_BMC_RSTBTN_OUT_N", "", "", "", "",
/*Q0 - Q7*/ "", "", "", "", "", "", "", "",
/*R0 - R7*/ "", "", "", "", "", "", "", "",
/*S0 - S7*/ "", "", "", "FP_ID_BTN_SCM_N", "", "", "", "",
/*T0 - T7*/ "", "", "", "", "", "", "", "",
/*U0 - U7*/ "", "", "", "", "", "", "", "",
/*V0 - V7*/ "", "", "", "", "", "SMI", "", "",
/*W0 - W7*/ "", "", "", "", "", "", "", "",
/*X0 - X7*/ "", "", "", "", "", "", "", "",
/*Y0 - Y7*/ "", "", "", "", "", "", "", "",
/*Z0 - Z7*/ "FM_BMC_READY_N", "", "", "", "", "", "", "",
/*AA0 - AA7*/ "", "", "", "", "", "", "", "",
/*AB0 - AB7*/ "", "", "", "", "", "", "", "",
/*AC0 - AC7*/ "", "", "", "", "", "", "", "";
};
&sgpiom0 {
status = "okay";
ngpios = <128>;
bus-frequency = <48000>;
gpio-line-names =
/* SGPIO input lines */
/*IOA0-IOA7*/ "","", "SIO_POWER_GOOD","OA1", "XDP_PRST_N","", "","", "FM_SLPS3_PLD_N","", "FM_SLPS4_PLD_N","", "FM_BIOS_POST_CMPLT_BMC_N","", "FM_ADR_TRIGGER_N","OA7",
/*IOB0-IOB7*/ "FM_ADR_COMPLETE","", "FM_PMBUS_ALERT_B_EN","", "PSU0_PRESENT_N","", "PSU1_PRESENT_N","", "PSU0_VIN_BUF_GOOD","", "PSU01_VIN_BUF_GOOD","", "PWRGD_PS0_PWROK_R","", "PWRGD_PS1_PWROK_R","",
/*IOC0-IOC7*/ "PWRGD_PS_PWROK_PLD_R","", "CHASSIS_INTRUSION","", "BMC_MFG_MODE","", "FM_BMC_EN_DET_R","", "FM_ME_BT_DONE","", "CPU1_PRESENCE","", "CPU2_PRESENCE","", "IRQ_PSYS_CRIT_N","",
/*IOD0-IOD7*/ "","", "CPU1_THERMTRIP","", "CPU2_THERMTRIP","", "CPU1_MEM_THERM_EVENT","", "CPU2_MEM_THERM_EVENT","", "CPU1_VRHOT","", "CPU2_VRHOT","", "","",
/*IOE0-IOE7*/ "","", "CPU1_MEM_VRHOT","", "CPU2_MEM_VRHOT","", "","", "PCH_BMC_THERMTRIP","", "","", "","", "","",
/*IOF0-IOF7*/ "CPU_ERR0","", "CPU_ERR1","", "CPU_ERR2","", "","", "","", "CPU_CATERR","", "","", "","",
/*IOG0-IOG7*/ "","", "","", "","", "","", "","", "","", "","", "","",
/*IOH0-IOH7*/ "","", "FP_ID_BTN_R1_N","", "FP_RST_BTN_N","", "","", "","", "FP_PWR_BTN_PLD_N_R","", "","", "","",
/*IOI0-IOI7*/ "","", "","", "","", "","", "","", "","", "","", "","",
/*IOJ0-IOJ7*/ "","", "","", "","", "","", "","", "","", "","", "","",
/*IOK0-IOK7*/ "","", "","", "","", "","", "","", "","", "","", "","",
/*IOL0-IOL7*/ "","", "","", "","", "","", "","", "","", "","", "","",
/*IOM0-IOM7*/ "","", "","", "","", "","", "","", "","", "","", "","",
/*ION0-ION7*/ "","BMC_SW_HEARTBEAT_N_R", "","FP_LED_FAULT_N", "","FP_ID_LED_N", "","FM_BMC_RSTBTN_OUT_N", "","FM_THERMTRIP_DLY_LVC1_R_N", "","", "","RST_PCA9548_SENSOR_PLD_N", "","USB_OC1_REAR_N",
/*IOO0-IOO7*/ "","IRQ_TPM_SPI_N", "","", "","IRQ_PCH_SCI_WHEA_R_N", "","IRQ_BMC_PCH_NMI_R", "","H_CPU_NMI_LVC1_R_N", "","", "","", "","FM_JTAG_BMC_PLD_MUX_SEL",
/*IOP0-IOP7*/ "IP0","OP0", "","", "","", "","", "","", "","", "","", "IP7","OP7";
};
&adc0 {
vref = <2500>;
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_adc0_default &pinctrl_adc1_default
&pinctrl_adc2_default &pinctrl_adc3_default
&pinctrl_adc4_default &pinctrl_adc5_default
&pinctrl_adc6_default &pinctrl_adc7_default>;
};
&adc1 {
vref = <2500>;
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_adc8_default &pinctrl_adc9_default
&pinctrl_adc10_default &pinctrl_adc11_default
&pinctrl_adc12_default &pinctrl_adc13_default
&pinctrl_adc14_default &pinctrl_adc15_default>;
};
&mdio2 {
status = "okay";
ethphy2: ethernet-phy@0 {
compatible = "ethernet-phy-ieee802.3-c22";
reg = <0>;
};
};
&mac2 {
status = "okay";
phy-mode = "rgmii";
phy-handle = <&ethphy2>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_rgmii3_default>;
};
&mac3 {
status = "okay";
phy-mode = "rmii";
use-ncsi;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_rmii4_default>;
};
&fmc {
status = "okay";
flash@0 {
status = "okay";
m25p,fast-read;
label = "bmc";
spi-max-frequency = <50000000>;
#include "openbmc-flash-layout-64.dtsi"
};
};
&spi2 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_spi2_default &pinctrl_spi2cs1_default
&pinctrl_spi2cs2_default>;
status = "okay";
flash@0 {
status = "okay";
m25p,fast-read;
label = "spi2:0";
spi-max-frequency = <50000000>;
};
};
&kcs1 {
status = "okay";
aspeed,lpc-io-reg = <0xCA0>;
};
&kcs2 {
status = "okay";
aspeed,lpc-io-reg = <0xCA8>;
};
&kcs3 {
status = "okay";
aspeed,lpc-io-reg = <0xCA2>;
};
&emmc_controller {
status = "okay";
};
&emmc {
non-removable;
bus-width = <4>;
max-frequency = <100000000>;
};
&vhub {
status = "okay";
};
&lpc_snoop {
status = "okay";
snoop-ports = <0x80>;
};
&uart1 {
status = "okay";
};
&uart2 {
status = "okay";
};
&uart4 {
status = "okay";
};
&uart5 {
status = "okay";
};
&uart_routing {
status = "okay";
};
&i2c0 {
status = "okay";
U34_PWR_ADC@48 {
compatible = "ti,ads7830";
reg = <0x48>;
};
U35_PWR_ADC@4b {
compatible = "ti,ads7830";
reg = <0x4b>;
};
i2c-switch@70 {
compatible = "nxp,pca9546";
reg = <0x70>;
#address-cells = <1>;
#size-cells = <0>;
i2c-mux-idle-disconnect;
SMB_HOST_DB2000_3V3AUX_SCL: i2c@0 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0>;
};
U12_PCA9546_CH1: i2c@1 {
#address-cells = <1>;
#size-cells = <0>;
reg = <1>;
};
SMB_HOST_DB800_B_SCL: i2c@2 {
#address-cells = <1>;
#size-cells = <0>;
reg = <2>;
};
SMB_HOST_DB800_C_SCL: i2c@3 {
#address-cells = <1>;
#size-cells = <0>;
reg = <3>;
};
};
};
&i2c1 {
status = "okay";
i2c-switch@59 {
compatible = "nxp,pca9848";
reg = <0x59>;
#address-cells = <1>;
#size-cells = <0>;
i2c-mux-idle-disconnect;
SMB_M2_P0_1V8AUX_SCL: i2c@0 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0>;
};
SMB_M2_P1_1V8AUX_SCL: i2c@1 {
#address-cells = <1>;
#size-cells = <0>;
reg = <1>;
};
SMB_CPU_PIROM_3V3AUX_SCL: i2c@2 {
#address-cells = <1>;
#size-cells = <0>;
reg = <2>;
};
SMB_TEMP_3V3AUX_SCL: i2c@3 {
#address-cells = <1>;
#size-cells = <0>;
reg = <3>;
U163_tmp75@48 {
compatible = "ti,tmp75";
reg = <0x48>;
};
U114_tmp75@49 {
compatible = "ti,tmp75";
reg = <0x49>;
};
};
SMB_IPMB_3V3AUX_SSDSB_SCL: i2c@4 {
#address-cells = <1>;
#size-cells = <0>;
reg = <4>;
U4_tmp75@4c {
compatible = "ti,tmp75";
reg = <0x4c>;
};
U73_tmp75@4d {
compatible = "ti,tmp75";
reg = <0x4d>;
};
};
SMB_IPMB_3V3AUX_SCL: i2c@5 {
#address-cells = <1>;
#size-cells = <0>;
reg = <5>;
U190_fru@51 {
compatible = "atmel,24c128";
reg = <0x51>;
pagesize = <32>;
};
};
SMB_FB_SCL: i2c@7 {
#address-cells = <1>;
#size-cells = <0>;
reg = <7>;
i2c-switch@77 {
compatible = "nxp,pca9546";
reg = <0x77>;
#address-cells = <1>;
#size-cells = <0>;
i2c-mux-idle-disconnect;
SMB_IOEXP_SCL: i2c@0 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0>;
};
SMB_PROGRAM_SCL: i2c@1 {
#address-cells = <1>;
#size-cells = <0>;
reg = <1>;
};
SMB_FB_SCL_CH2: i2c@2 {
#address-cells = <1>;
#size-cells = <0>;
reg = <2>;
};
SMB_FAN_SENSE_SCL: i2c@3 {
#address-cells = <1>;
#size-cells = <0>;
reg = <3>;
Current_Meter_U2@45 {
compatible = "ti,ina219";
reg = <0x45>;
shunt-resistor = <1000>; /* = 1 mOhm */
};
Current_Meter_U3@44 {
compatible = "ti,ina219";
reg = <0x44>;
shunt-resistor = <1000>; /* = 1 mOhm */
};
TEMP_sensor_U2@4b {
compatible = "ti,tmp75";
reg = <0x4b>;
};
};
};
};
};
};
&i2c2 {
status = "okay";
bus-frequency = <400000>;
ipmb@10 {
compatible = "ipmb-dev";
reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
i2c-protocol;
};
};
&i2c3 {
status = "okay";
/* MB FRU (U173) @ 0xA2 */
mb_fru: mb_fru@51 {
compatible = "atmel,24c128";
reg = <0x51>;
pagesize = <32>;
};
/* FP_U1 Inlet */
FP_U1_tmp75@4a {
compatible = "ti,tmp75";
reg = <0x4a>;
};
FP_U4_fru@52 {
compatible = "atmel,24c02";
reg = <0x52>;
pagesize = <16>;
};
};
&i2c4 {
status = "okay";
};
&i2c5 {
status = "okay";
};
&i2c6 {
status = "okay";
i2c-switch@77 {
compatible = "nxp,pca9548";
#address-cells = <1>;
#size-cells = <0>;
reg = <0x77>;
i2c-mux-idle-disconnect;
U197_PCA9546_CH0: i2c@0 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0>;
};
U197_PCA9546_CH1: i2c@1 {
#address-cells = <1>;
#size-cells = <0>;
reg = <1>;
cpu0_pvccin@60 {
compatible = "isil,raa229004";
reg = <0x60>;
};
cpu0_pvccinfaon@61 {
compatible = "isil,isl69260";
reg = <0x61>;
};
cpu0_pvccd_hv@63 {
compatible = "isil,isl69260";
reg = <0x63>;
};
};
U197_PCA9546_CH2: i2c@2 {
#address-cells = <1>;
#size-cells = <0>;
reg = <2>;
cpu1_pvccin@72 {
compatible = "isil,raa229004";
reg = <0x72>;
};
cpu1_pvccinfaon@74 {
compatible = "isil,isl69260";
reg = <0x74>;
};
cpu1_pvccd_hv@76 {
compatible = "isil,isl69260";
reg = <0x76>;
};
};
U197_PCA9546_CH3: i2c@3 {
#address-cells = <1>;
#size-cells = <0>;
reg = <3>;
};
};
};
&i2c7 {
status = "okay";
i2c-switch@75 {
compatible = "nxp,pca9546";
#address-cells = <1>;
#size-cells = <0>;
reg = <0x75>;
i2c-mux-idle-disconnect;
SMB_OCP_SFF_3V3AUX_SCL: i2c@0 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0>;
};
SMB_OCP_LFF_3V3AUX_SCL: i2c@1 {
#address-cells = <1>;
#size-cells = <0>;
reg = <1>;
};
};
};
&i2c8 {
status = "okay";
};
&i2c9 {
status = "okay";
};
&i2c11 {
status = "okay";
};
&i2c14 {
status = "okay";
/* SCM FRU (U19) @ 0xA2 */
scm_fru: scm_fru@51 {
compatible = "atmel,24c128";
reg = <0x51>;
pagesize = <32>;
};
scm_tmp75_u4@4a {
compatible = "ti,tmp75";
reg = <0x4a>;
};
};
&i2c15 {
status = "okay";
};

8
arch/arm/boot/dts/at91-sam9x60ek.dts
View File

@ -48,11 +48,11 @@
status = "okay";
};
vdd_1v5: fixed-regulator-vdd_1v5@1 {
vdd_1v15: fixed-regulator-vdd_1v15@1 {
compatible = "regulator-fixed";
regulator-name = "VDD_1V5";
regulator-min-microvolt = <1500000>;
regulator-max-microvolt = <1500000>;
regulator-name = "VDD_1V15";
regulator-min-microvolt = <1150000>;
regulator-max-microvolt = <1150000>;
regulator-always-on;
status = "okay";
};

32
arch/arm/boot/dts/at91-sama7g5ek.dts
View File

@ -131,6 +131,18 @@
status = "okay";
};
&can0 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_can0_default>;
status = "okay";
};
&can1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_can1_default>;
status = "okay";
};
&cpu0 {
cpu-supply = <&vddcpu>;
};
@ -239,6 +251,7 @@
regulator-state-standby {
regulator-on-in-suspend;
regulator-suspend-microvolt = <3300000>;
regulator-mode = <4>;
};
@ -279,6 +292,7 @@
regulator-state-standby {
regulator-on-in-suspend;
regulator-suspend-voltage = <1150000>;
regulator-mode = <4>;
};
@ -290,7 +304,7 @@
vddcpu: VDD_OTHER {
regulator-name = "VDD_OTHER";
regulator-min-microvolt = <1125000>;
regulator-min-microvolt = <1050000>;
regulator-max-microvolt = <1850000>;
regulator-initial-mode = <2>;
regulator-allowed-modes = <2>, <4>;
@ -299,6 +313,7 @@
regulator-state-standby {
regulator-on-in-suspend;
regulator-suspend-voltage = <1050000>;
regulator-mode = <4>;
};
@ -315,6 +330,7 @@
regulator-always-on;
regulator-state-standby {
regulator-suspend-voltage = <1800000>;
regulator-on-in-suspend;
};
@ -329,6 +345,7 @@
regulator-max-microvolt = <3700000>;
regulator-state-standby {
regulator-suspend-voltage = <1800000>;
regulator-on-in-suspend;
};
@ -454,6 +471,19 @@
};
&pioA {
pinctrl_can0_default: can0_default {
pinmux = <PIN_PD12__CANTX0>,
<PIN_PD13__CANRX0 >;
bias-disable;
};
pinctrl_can1_default: can1_default {
pinmux = <PIN_PD14__CANTX1>,
<PIN_PD15__CANRX1 >;
bias-disable;
};
pinctrl_flx0_default: flx0_default {
pinmux = <PIN_PE3__FLEXCOM0_IO0>,
<PIN_PE4__FLEXCOM0_IO1>,

50
arch/arm/boot/dts/bcm2711.dtsi
View File

@ -459,12 +459,26 @@
#size-cells = <0>;
enable-method = "brcm,bcm2836-smp"; // for ARM 32-bit
/* Source for d/i-cache-line-size and d/i-cache-sets
* https://developer.arm.com/documentation/100095/0003
* /Level-1-Memory-System/About-the-L1-memory-system?lang=en
* Source for d/i-cache-size
* https://www.raspberrypi.com/documentation/computers
* /processors.html#bcm2711
*/
cpu0: cpu@0 {
device_type = "cpu";
compatible = "arm,cortex-a72";
reg = <0>;
enable-method = "spin-table";
cpu-release-addr = <0x0 0x000000d8>;
d-cache-size = <0x8000>;
d-cache-line-size = <64>;
d-cache-sets = <256>; // 32KiB(size)/64(line-size)=512ways/2-way set
i-cache-size = <0xc000>;
i-cache-line-size = <64>;
i-cache-sets = <256>; // 48KiB(size)/64(line-size)=768ways/3-way set
next-level-cache = <&l2>;
};
cpu1: cpu@1 {
@ -473,6 +487,13 @@
reg = <1>;
enable-method = "spin-table";
cpu-release-addr = <0x0 0x000000e0>;
d-cache-size = <0x8000>;
d-cache-line-size = <64>;
d-cache-sets = <256>; // 32KiB(size)/64(line-size)=512ways/2-way set
i-cache-size = <0xc000>;
i-cache-line-size = <64>;
i-cache-sets = <256>; // 48KiB(size)/64(line-size)=768ways/3-way set
next-level-cache = <&l2>;
};
cpu2: cpu@2 {
@ -481,6 +502,13 @@
reg = <2>;
enable-method = "spin-table";
cpu-release-addr = <0x0 0x000000e8>;
d-cache-size = <0x8000>;
d-cache-line-size = <64>;
d-cache-sets = <256>; // 32KiB(size)/64(line-size)=512ways/2-way set
i-cache-size = <0xc000>;
i-cache-line-size = <64>;
i-cache-sets = <256>; // 48KiB(size)/64(line-size)=768ways/3-way set
next-level-cache = <&l2>;
};
cpu3: cpu@3 {
@ -489,6 +517,28 @@
reg = <3>;
enable-method = "spin-table";
cpu-release-addr = <0x0 0x000000f0>;
d-cache-size = <0x8000>;
d-cache-line-size = <64>;
d-cache-sets = <256>; // 32KiB(size)/64(line-size)=512ways/2-way set
i-cache-size = <0xc000>;
i-cache-line-size = <64>;
i-cache-sets = <256>; // 48KiB(size)/64(line-size)=768ways/3-way set
next-level-cache = <&l2>;
};
/* Source for d/i-cache-line-size and d/i-cache-sets
* https://developer.arm.com/documentation/100095/0003
* /Level-2-Memory-System/About-the-L2-memory-system?lang=en
* Source for d/i-cache-size
* https://www.raspberrypi.com/documentation/computers
* /processors.html#bcm2711
*/
l2: l2-cache0 {
compatible = "cache";
cache-size = <0x100000>;
cache-line-size = <64>;
cache-sets = <1024>; // 1MiB(size)/64(line-size)=16384ways/16-way set
cache-level = <2>;
};
};

17
arch/arm/boot/dts/bcm2835.dtsi
View File

@ -14,6 +14,23 @@
device_type = "cpu";
compatible = "arm,arm1176jzf-s";
reg = <0x0>;
/* Source for d/i-cache-line-size and d/i-cache-sets
* https://developer.arm.com/documentation/ddi0301
* /h/level-one-memory-system/cache-organization?lang=en
*
* Source for d/i-cache-size
* https://forums.raspberrypi.com/viewtopic.php?t=98428
*
* NOTE: The BCM2835 has a L2 cache but it is dedicated to the GPU
* It can be shared with the CPU through fw settings,
* but this is not recommended.
*/
d-cache-size = <0x4000>;
d-cache-line-size = <16>;
d-cache-sets = <256>; // 16KiB(size)/16(line-size)=1024ways/4-way set
i-cache-size = <0x4000>;
i-cache-line-size = <16>;
i-cache-sets = <256>; // 16KiB(size)/16(line-size)=1024ways/4-way set
};
};

50
arch/arm/boot/dts/bcm2836.dtsi
View File

@ -41,11 +41,26 @@
#size-cells = <0>;
enable-method = "brcm,bcm2836-smp";
/* Source for d/i-cache-line-size and d/i-cache-sets
* https://developer.arm.com/documentation/ddi0464/f/L1-Memory-System
* /About-the-L1-memory-system?lang=en
*
* Source for d/i-cache-size
* https://forums.raspberrypi.com/viewtopic.php?t=98428
*/
v7_cpu0: cpu@0 {
device_type = "cpu";
compatible = "arm,cortex-a7";
reg = <0xf00>;
clock-frequency = <800000000>;
d-cache-size = <0x8000>;
d-cache-line-size = <64>;
d-cache-sets = <128>; // 32KiB(size)/64(line-size)=512ways/4-way set
i-cache-size = <0x8000>;
i-cache-line-size = <32>;
i-cache-sets = <512>; // 32KiB(size)/32(line-size)=1024ways/2-way set
next-level-cache = <&l2>;
};
v7_cpu1: cpu@1 {
@ -53,6 +68,13 @@
compatible = "arm,cortex-a7";
reg = <0xf01>;
clock-frequency = <800000000>;
d-cache-size = <0x8000>;
d-cache-line-size = <64>;
d-cache-sets = <128>; // 32KiB(size)/64(line-size)=512ways/4-way set
i-cache-size = <0x8000>;
i-cache-line-size = <32>;
i-cache-sets = <512>; // 32KiB(size)/32(line-size)=1024ways/2-way set
next-level-cache = <&l2>;
};
v7_cpu2: cpu@2 {
@ -60,6 +82,13 @@
compatible = "arm,cortex-a7";
reg = <0xf02>;
clock-frequency = <800000000>;
d-cache-size = <0x8000>;
d-cache-line-size = <64>;
d-cache-sets = <128>; // 32KiB(size)/64(line-size)=512ways/4-way set
i-cache-size = <0x8000>;
i-cache-line-size = <32>;
i-cache-sets = <512>; // 32KiB(size)/32(line-size)=1024ways/2-way set
next-level-cache = <&l2>;
};
v7_cpu3: cpu@3 {
@ -67,6 +96,27 @@
compatible = "arm,cortex-a7";
reg = <0xf03>;
clock-frequency = <800000000>;
d-cache-size = <0x8000>;
d-cache-line-size = <64>;
d-cache-sets = <128>; // 32KiB(size)/64(line-size)=512ways/4-way set
i-cache-size = <0x8000>;
i-cache-line-size = <32>;
i-cache-sets = <512>; // 32KiB(size)/32(line-size)=1024ways/2-way set
next-level-cache = <&l2>;
};
/* Source for cache-line-size + cache-sets
* https://developer.arm.com/documentation/ddi0464/f/L2-Memory-System
* /About-the-L2-Memory-system?lang=en
* Source for cache-size
* https://forums.raspberrypi.com/viewtopic.php?t=98428
*/
l2: l2-cache0 {
compatible = "cache";
cache-size = <0x80000>;
cache-line-size = <64>;
cache-sets = <1024>; // 512KiB(size)/64(line-size)=8192ways/8-way set
cache-level = <2>;
};
};
};

136
arch/arm/boot/dts/bcm2837-rpi-zero-2-w.dts Normal file
View File

@ -0,0 +1,136 @@
// SPDX-License-Identifier: GPL-2.0+
/*
* Copyright (C) 2022 Stefan Wahren <stefan.wahren@i2se.com>
*/
/dts-v1/;
#include "bcm2837.dtsi"
#include "bcm2836-rpi.dtsi"
#include "bcm283x-rpi-usb-otg.dtsi"
#include "bcm283x-rpi-wifi-bt.dtsi"
/ {
compatible = "raspberrypi,model-zero-2-w", "brcm,bcm2837";
model = "Raspberry Pi Zero 2 W";
memory@0 {
device_type = "memory";
reg = <0 0x20000000>;
};
chosen {
/* 8250 auxiliary UART instead of pl011 */
stdout-path = "serial1:115200n8";
};
leds {
led-act {
gpios = <&gpio 29 GPIO_ACTIVE_LOW>;
};
};
};
&bt {
shutdown-gpios = <&gpio 42 GPIO_ACTIVE_HIGH>;
};
&gpio {
/*
* This is based on the official GPU firmware DT blob.
*
* Legend:
* "NC" = not connected (no rail from the SoC)
* "FOO" = GPIO line named "FOO" on the schematic
* "FOO_N" = GPIO line named "FOO" on schematic, active low
*/
gpio-line-names = "ID_SDA",
"ID_SCL",
"SDA1",
"SCL1",
"GPIO_GCLK",
"GPIO5",
"GPIO6",
"SPI_CE1_N",
"SPI_CE0_N",
"SPI_MISO",
"SPI_MOSI",
"SPI_SCLK",
"GPIO12",
"GPIO13",
/* Serial port */
"TXD0",
"RXD0",
"GPIO16",
"GPIO17",
"GPIO18",
"GPIO19",
"GPIO20",
"GPIO21",
"GPIO22",
"GPIO23",
"GPIO24",
"GPIO25",
"GPIO26",
"GPIO27",
"HDMI_HPD_N",
"STATUS_LED_N",
"NC", /* GPIO30 */
"NC", /* GPIO31 */
"NC", /* GPIO32 */
"NC", /* GPIO33 */
"NC", /* GPIO34 */
"NC", /* GPIO35 */
"NC", /* GPIO36 */
"NC", /* GPIO37 */
"NC", /* GPIO38 */
"NC", /* GPIO39 */
"CAM_GPIO0", /* GPIO40 */
"WL_ON", /* GPIO41 */
"BT_ON", /* GPIO42 */
"WIFI_CLK", /* GPIO43 */
"SDA0", /* GPIO44 */
"SCL0", /* GPIO45 */
"SMPS_SCL",
"SMPS_SDA",
/* Used by SD Card */
"SD_CLK_R",
"SD_CMD_R",
"SD_DATA0_R",
"SD_DATA1_R",
"SD_DATA2_R",
"SD_DATA3_R";
pinctrl-0 = <&gpioout &alt0>;
};
&hdmi {
hpd-gpios = <&gpio 28 GPIO_ACTIVE_LOW>;
power-domains = <&power RPI_POWER_DOMAIN_HDMI>;
status = "okay";
};
&sdhci {
pinctrl-0 = <&emmc_gpio34 &gpclk2_gpio43>;
};
&sdhost {
pinctrl-names = "default";
pinctrl-0 = <&sdhost_gpio48>;
bus-width = <4>;
status = "okay";
};
&uart0 {
pinctrl-names = "default";
pinctrl-0 = <&uart0_gpio32 &uart0_ctsrts_gpio30>;
};
&uart1 {
pinctrl-names = "default";
pinctrl-0 = <&uart1_gpio14>;
status = "okay";
};
&wifi_pwrseq {
reset-gpios = <&gpio 41 GPIO_ACTIVE_LOW>;
};

49
arch/arm/boot/dts/bcm2837.dtsi
View File

@ -40,12 +40,26 @@
#size-cells = <0>;
enable-method = "brcm,bcm2836-smp"; // for ARM 32-bit
/* Source for d/i-cache-line-size and d/i-cache-sets
* https://developer.arm.com/documentation/ddi0500/e/level-1-memory-system
* /about-the-l1-memory-system?lang=en
*
* Source for d/i-cache-size
* https://magpi.raspberrypi.com/articles/raspberry-pi-3-specs-benchmarks
*/
cpu0: cpu@0 {
device_type = "cpu";
compatible = "arm,cortex-a53";
reg = <0>;
enable-method = "spin-table";
cpu-release-addr = <0x0 0x000000d8>;
d-cache-size = <0x8000>;
d-cache-line-size = <64>;
d-cache-sets = <128>; // 32KiB(size)/64(line-size)=512ways/4-way set
i-cache-size = <0x8000>;
i-cache-line-size = <64>;
i-cache-sets = <256>; // 32KiB(size)/64(line-size)=512ways/2-way set
next-level-cache = <&l2>;
};
cpu1: cpu@1 {
@ -54,6 +68,13 @@
reg = <1>;
enable-method = "spin-table";
cpu-release-addr = <0x0 0x000000e0>;
d-cache-size = <0x8000>;
d-cache-line-size = <64>;
d-cache-sets = <128>; // 32KiB(size)/64(line-size)=512ways/4-way set
i-cache-size = <0x8000>;
i-cache-line-size = <64>;
i-cache-sets = <256>; // 32KiB(size)/64(line-size)=512ways/2-way set
next-level-cache = <&l2>;
};
cpu2: cpu@2 {
@ -62,6 +83,13 @@
reg = <2>;
enable-method = "spin-table";
cpu-release-addr = <0x0 0x000000e8>;
d-cache-size = <0x8000>;
d-cache-line-size = <64>;
d-cache-sets = <128>; // 32KiB(size)/64(line-size)=512ways/4-way set
i-cache-size = <0x8000>;
i-cache-line-size = <64>;
i-cache-sets = <256>; // 32KiB(size)/64(line-size)=512ways/2-way set
next-level-cache = <&l2>;
};
cpu3: cpu@3 {
@ -70,6 +98,27 @@
reg = <3>;
enable-method = "spin-table";
cpu-release-addr = <0x0 0x000000f0>;
d-cache-size = <0x8000>;
d-cache-line-size = <64>;
d-cache-sets = <128>; // 32KiB(size)/64(line-size)=512ways/4-way set
i-cache-size = <0x8000>;
i-cache-line-size = <64>;
i-cache-sets = <256>; // 32KiB(size)/64(line-size)=512ways/2-way set
next-level-cache = <&l2>;
};
/* Source for cache-line-size + cache-sets
* https://developer.arm.com/documentation/ddi0500
* /e/level-2-memory-system/about-the-l2-memory-system?lang=en
* Source for cache-size
* https://datasheets.raspberrypi.com/cm/cm1-and-cm3-datasheet.pdf
*/
l2: l2-cache0 {
compatible = "cache";
cache-size = <0x80000>;
cache-line-size = <64>;
cache-sets = <512>; // 512KiB(size)/64(line-size)=8192ways/16-way set
cache-level = <2>;
};
};
};

76
arch/arm/boot/dts/bcm47094-asus-rt-ac88u.dts
View File

@ -93,6 +93,82 @@
gpios = <&chipcommon 4 GPIO_ACTIVE_LOW>;
};
};
switch {
compatible = "realtek,rtl8365mb";
/* 7 = MDIO (has input reads), 6 = MDC (clock, output only) */
mdc-gpios = <&chipcommon 6 GPIO_ACTIVE_HIGH>;
mdio-gpios = <&chipcommon 7 GPIO_ACTIVE_HIGH>;
reset-gpios = <&chipcommon 10 GPIO_ACTIVE_LOW>;
realtek,disable-leds;
dsa,member = <1 0>;
ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
label = "lan5";
phy-handle = <&ethphy0>;
};
port@1 {
reg = <1>;
label = "lan6";
phy-handle = <&ethphy1>;
};
port@2 {
reg = <2>;
label = "lan7";
phy-handle = <&ethphy2>;
};
port@3 {
reg = <3>;
label = "lan8";
phy-handle = <&ethphy3>;
};
port@6 {
reg = <6>;
label = "cpu";
ethernet = <&sw0_p5>;
phy-mode = "rgmii";
tx-internal-delay-ps = <2000>;
rx-internal-delay-ps = <2100>;
fixed-link {
speed = <1000>;
full-duplex;
pause;
};
};
};
mdio {
compatible = "realtek,smi-mdio";
#address-cells = <1>;
#size-cells = <0>;
ethphy0: ethernet-phy@0 {
reg = <0>;
};
ethphy1: ethernet-phy@1 {
reg = <1>;
};
ethphy2: ethernet-phy@2 {
reg = <2>;
};
ethphy3: ethernet-phy@3 {
reg = <3>;
};
};
};
};
&srab {

8
arch/arm/boot/dts/bcm47094-luxul-xwr-3150-v1.dts
View File

@ -25,6 +25,9 @@
nvram@1eff0000 {
compatible = "brcm,nvram";
reg = <0x1eff0000 0x10000>;
et0macaddr: et0macaddr {
};
};
leds {
@ -72,6 +75,11 @@
};
};
&gmac0 {
nvmem-cells = <&et0macaddr>;
nvmem-cell-names = "mac-address";
};
&usb3 {
vcc-gpio = <&chipcommon 18 GPIO_ACTIVE_HIGH>;
};

3
arch/arm/boot/dts/bcm958625-meraki-alamo.dtsi
View File

@ -57,10 +57,9 @@
led-4 {
/* amber:power */
function = LED_FUNCTION_POWER;
function = LED_FUNCTION_FAULT;
color = <LED_COLOR_ID_AMBER>;
gpios = <&gpioa 3 GPIO_ACTIVE_HIGH>;
default-state = "on";
};
led-5 {

3
arch/arm/boot/dts/bcm958625-meraki-kingpin.dtsi
View File

@ -106,10 +106,9 @@
led-a {
/* amber:power */
function = LED_FUNCTION_POWER;
function = LED_FUNCTION_FAULT;
color = <LED_COLOR_ID_AMBER>;
gpios = <&gpioa 0 GPIO_ACTIVE_LOW>;
default-state = "on";
};
led-b {

10
arch/arm/boot/dts/bcm958625-meraki-mx6x-common.dtsi
View File

@ -22,7 +22,7 @@
};
led-2 {
function = LED_FUNCTION_INDICATOR;
function = LED_FUNCTION_POWER;
color = <LED_COLOR_ID_GREEN>;
pwms = <&pwm 2 50000>;
max-brightness = <255>;
@ -39,6 +39,8 @@
&amac2 {
status = "okay";
nvmem-cells = <&mac_address>;
nvmem-cell-names = "mac-address";
};
&ehci0 {
@ -53,6 +55,12 @@
reg = <0x50>;
pagesize = <32>;
read-only;
#address-cells = <1>;
#size-cells = <1>;
mac_address: mac-address@66 {
reg = <0x66 0x6>;
};
};
};

35
arch/arm/boot/dts/en7523-evb.dts Normal file
View File

@ -0,0 +1,35 @@
// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
/dts-v1/;
/* Bootloader installs ATF here */
/memreserve/ 0x80000000 0x200000;
#include "en7523.dtsi"
/ {
model = "Airoha EN7523 Evaluation Board";
compatible = "airoha,en7523-evb", "airoha,en7523";
aliases {
serial0 = &uart1;
};
chosen {
bootargs = "console=ttyS0,115200 earlycon";
stdout-path = "serial0:115200n8";
linux,usable-memory-range = <0x80200000 0x1fe00000>;
};
memory@80000000 {
device_type = "memory";
reg = <0x80000000 0x20000000>;
};
};
&gpio0 {
status = "okay";
};
&gpio1 {
status = "okay";
};

138
arch/arm/boot/dts/en7523.dtsi Normal file
View File

@ -0,0 +1,138 @@
// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/gpio/gpio.h>
/ {
interrupt-parent = <&gic>;
#address-cells = <1>;
#size-cells = <1>;
reserved-memory {
#address-cells = <1>;
#size-cells = <1>;
ranges;
npu_binary@84000000 {
no-map;
reg = <0x84000000 0xA00000>;
};
npu_flag@84B0000 {
no-map;
reg = <0x84B00000 0x100000>;
};
npu_pkt@85000000 {
no-map;
reg = <0x85000000 0x1A00000>;
};
npu_phyaddr@86B00000 {
no-map;
reg = <0x86B00000 0x100000>;
};
npu_rxdesc@86D00000 {
no-map;
reg = <0x86D00000 0x100000>;
};
};
psci {
compatible = "arm,psci-0.2";
method = "smc";
};
cpus {
#address-cells = <1>;
#size-cells = <0>;
cpu-map {
cluster0 {
core0 {
cpu = <&cpu0>;
};
core1 {
cpu = <&cpu1>;
};
};
};
cpu0: cpu@0 {
device_type = "cpu";
compatible = "arm,cortex-a53";
reg = <0x0>;
enable-method = "psci";
clock-frequency = <80000000>;
next-level-cache = <&L2_0>;
};
cpu1: cpu@1 {
device_type = "cpu";
compatible = "arm,cortex-a53";
reg = <0x1>;
enable-method = "psci";
clock-frequency = <80000000>;
next-level-cache = <&L2_0>;
};
L2_0: l2-cache0 {
compatible = "cache";
};
};
gic: interrupt-controller@9000000 {
compatible = "arm,gic-v3";
interrupt-controller;
#interrupt-cells = <3>;
#address-cells = <1>;
#size-cells = <1>;
reg = <0x09000000 0x20000>,
<0x09080000 0x80000>,
<0x09400000 0x2000>,
<0x09500000 0x2000>,
<0x09600000 0x20000>;
interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_LOW>;
};
timer {
compatible = "arm,armv8-timer";
interrupt-parent = <&gic>;
interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
<GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,
<GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
<GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>;
};
uart1: serial@1fbf0000 {
compatible = "ns16550";
reg = <0x1fbf0000 0x30>;
reg-io-width = <4>;
reg-shift = <2>;
interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
clock-frequency = <1843200>;
status = "okay";
};
gpio0: gpio@1fbf0200 {
compatible = "airoha,en7523-gpio";
reg = <0x1fbf0204 0x4>,
<0x1fbf0200 0x4>,
<0x1fbf0220 0x4>,
<0x1fbf0214 0x4>;
gpio-controller;
#gpio-cells = <2>;
};
gpio1: gpio@1fbf0270 {
compatible = "airoha,en7523-gpio";
reg = <0x1fbf0270 0x4>,
<0x1fbf0260 0x4>,
<0x1fbf0264 0x4>,
<0x1fbf0278 0x4>;
gpio-controller;
#gpio-cells = <2>;
};
};

10
arch/arm/boot/dts/exynos3250-artik5.dtsi
View File

@ -356,7 +356,7 @@
};
&pinctrl_1 {
bten: bten {
bten: bten-pins {
samsung,pins ="gpx1-7";
samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
@ -364,7 +364,7 @@
samsung,pin-pud-pdn = <EXYNOS_PIN_PULL_DOWN>;
};
wlanen: wlanen {
wlanen: wlanen-pins {
samsung,pins = "gpx2-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
@ -372,12 +372,12 @@
samsung,pin-val = <1>;
};
s2mps14_irq: s2mps14-irq {
s2mps14_irq: s2mps14-irq-pins {
samsung,pins = "gpx3-5";
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
};
bthostwake: bthostwake {
bthostwake: bthostwake-pins {
samsung,pins = "gpx3-6";
samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
@ -385,7 +385,7 @@
samsung,pin-pud-pdn = <EXYNOS_PIN_PULL_NONE>;
};
btwake: btwake {
btwake: btwake-pins {
samsung,pins = "gpx3-7";
samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;

2
arch/arm/boot/dts/exynos3250-monk.dts
View File

@ -69,7 +69,7 @@
reg = <0x25>;
wakeup-source;
muic: max77836-muic {
extcon {
compatible = "maxim,max77836-muic";
};

165
arch/arm/boot/dts/exynos3250-pinctrl.dtsi
View File

@ -12,47 +12,22 @@
#include <dt-bindings/pinctrl/samsung.h>
#define PIN_IN(_pin, _pull, _drv) \
_pin { \
pin- ## _pin { \
samsung,pins = #_pin; \
samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>; \
samsung,pin-pud = <EXYNOS_PIN_PULL_ ##_pull>; \
samsung,pin-drv = <EXYNOS4_PIN_DRV_ ##_drv>; \
}
#define PIN_OUT(_pin, _drv) \
_pin { \
samsung,pins = #_pin; \
samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>; \
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; \
samsung,pin-drv = <EXYNOS4_PIN_DRV_ ##_drv>; \
}
#define PIN_OUT_SET(_pin, _val, _drv) \
_pin { \
samsung,pins = #_pin; \
samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>; \
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; \
samsung,pin-drv = <EXYNOS4_PIN_DRV_ ##_drv>; \
samsung,pin-val = <_val>; \
}
#define PIN_CFG(_pin, _sel, _pull, _drv) \
_pin { \
samsung,pins = #_pin; \
samsung,pin-function = <_sel>; \
samsung,pin-pud = <EXYNOS_PIN_PULL_ ##_pull>; \
samsung,pin-drv = <EXYNOS4_PIN_DRV_ ##_drv>; \
}
#define PIN_SLP(_pin, _mode, _pull) \
_pin { \
pin- ## _pin { \
samsung,pins = #_pin; \
samsung,pin-con-pdn = <EXYNOS_PIN_PDN_ ##_mode>; \
samsung,pin-pud-pdn = <EXYNOS_PIN_PULL_ ##_pull>; \
}
&pinctrl_0 {
gpa0: gpa0 {
gpa0: gpa0-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@ -60,7 +35,7 @@
#interrupt-cells = <2>;
};
gpa1: gpa1 {
gpa1: gpa1-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@ -68,7 +43,7 @@
#interrupt-cells = <2>;
};
gpb: gpb {
gpb: gpb-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@ -76,7 +51,7 @@
#interrupt-cells = <2>;
};
gpc0: gpc0 {
gpc0: gpc0-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@ -84,7 +59,7 @@
#interrupt-cells = <2>;
};
gpc1: gpc1 {
gpc1: gpc1-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@ -92,7 +67,7 @@
#interrupt-cells = <2>;
};
gpd0: gpd0 {
gpd0: gpd0-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@ -100,7 +75,7 @@
#interrupt-cells = <2>;
};
gpd1: gpd1 {
gpd1: gpd1-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@ -108,84 +83,84 @@
#interrupt-cells = <2>;
};
uart0_data: uart0-data {
uart0_data: uart0-data-pins {
samsung,pins = "gpa0-0", "gpa0-1";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
uart0_fctl: uart0-fctl {
uart0_fctl: uart0-fctl-pins {
samsung,pins = "gpa0-2", "gpa0-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
uart1_data: uart1-data {
uart1_data: uart1-data-pins {
samsung,pins = "gpa0-4", "gpa0-5";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
uart1_fctl: uart1-fctl {
uart1_fctl: uart1-fctl-pins {
samsung,pins = "gpa0-6", "gpa0-7";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
i2c2_bus: i2c2-bus {
i2c2_bus: i2c2-bus-pins {
samsung,pins = "gpa0-6", "gpa0-7";
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
uart2_data: uart2-data {
uart2_data: uart2-data-pins {
samsung,pins = "gpa1-0", "gpa1-1";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
i2c3_bus: i2c3-bus {
i2c3_bus: i2c3-bus-pins {
samsung,pins = "gpa1-2", "gpa1-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
spi0_bus: spi0-bus {
spi0_bus: spi0-bus-pins {
samsung,pins = "gpb-0", "gpb-2", "gpb-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
i2c4_bus: i2c4-bus {
i2c4_bus: i2c4-bus-pins {
samsung,pins = "gpb-0", "gpb-1";
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
spi1_bus: spi1-bus {
spi1_bus: spi1-bus-pins {
samsung,pins = "gpb-4", "gpb-6", "gpb-7";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
i2c5_bus: i2c5-bus {
i2c5_bus: i2c5-bus-pins {
samsung,pins = "gpb-2", "gpb-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
i2s2_bus: i2s2-bus {
i2s2_bus: i2s2-bus-pins {
samsung,pins = "gpc1-0", "gpc1-1", "gpc1-2", "gpc1-3",
"gpc1-4";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
@ -193,7 +168,7 @@
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
pcm2_bus: pcm2-bus {
pcm2_bus: pcm2-bus-pins {
samsung,pins = "gpc1-0", "gpc1-1", "gpc1-2", "gpc1-3",
"gpc1-4";
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
@ -201,63 +176,63 @@
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
i2c6_bus: i2c6-bus {
i2c6_bus: i2c6-bus-pins {
samsung,pins = "gpc1-3", "gpc1-4";
samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
pwm0_out: pwm0-out {
pwm0_out: pwm0-out-pins {
samsung,pins = "gpd0-0";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
pwm1_out: pwm1-out {
pwm1_out: pwm1-out-pins {
samsung,pins = "gpd0-1";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
i2c7_bus: i2c7-bus {
i2c7_bus: i2c7-bus-pins {
samsung,pins = "gpd0-2", "gpd0-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
pwm2_out: pwm2-out {
pwm2_out: pwm2-out-pins {
samsung,pins = "gpd0-2";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
pwm3_out: pwm3-out {
pwm3_out: pwm3-out-pins {
samsung,pins = "gpd0-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
i2c0_bus: i2c0-bus {
i2c0_bus: i2c0-bus-pins {
samsung,pins = "gpd1-0", "gpd1-1";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
mipi0_clk: mipi0-clk {
mipi0_clk: mipi0-clk-pins {
samsung,pins = "gpd1-0", "gpd1-1";
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
i2c1_bus: i2c1-bus {
i2c1_bus: i2c1-bus-pins {
samsung,pins = "gpd1-2", "gpd1-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
@ -266,22 +241,22 @@
};
&pinctrl_1 {
gpe0: gpe0 {
gpe0: gpe0-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
};
gpe1: gpe1 {
gpe1: gpe1-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
};
gpe2: gpe2 {
gpe2: gpe2-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
};
gpk0: gpk0 {
gpk0: gpk0-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@ -289,7 +264,7 @@
#interrupt-cells = <2>;
};
gpk1: gpk1 {
gpk1: gpk1-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@ -297,7 +272,7 @@
#interrupt-cells = <2>;
};
gpk2: gpk2 {
gpk2: gpk2-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@ -305,7 +280,7 @@
#interrupt-cells = <2>;
};
gpl0: gpl0 {
gpl0: gpl0-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@ -313,7 +288,7 @@
#interrupt-cells = <2>;
};
gpm0: gpm0 {
gpm0: gpm0-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@ -321,7 +296,7 @@
#interrupt-cells = <2>;
};
gpm1: gpm1 {
gpm1: gpm1-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@ -329,7 +304,7 @@
#interrupt-cells = <2>;
};
gpm2: gpm2 {
gpm2: gpm2-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@ -337,7 +312,7 @@
#interrupt-cells = <2>;
};
gpm3: gpm3 {
gpm3: gpm3-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@ -345,7 +320,7 @@
#interrupt-cells = <2>;
};
gpm4: gpm4 {
gpm4: gpm4-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@ -353,7 +328,7 @@
#interrupt-cells = <2>;
};
gpx0: gpx0 {
gpx0: gpx0-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@ -370,7 +345,7 @@
#interrupt-cells = <2>;
};
gpx1: gpx1 {
gpx1: gpx1-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@ -387,7 +362,7 @@
#interrupt-cells = <2>;
};
gpx2: gpx2 {
gpx2: gpx2-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@ -395,7 +370,7 @@
#interrupt-cells = <2>;
};
gpx3: gpx3 {
gpx3: gpx3-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@ -403,126 +378,126 @@
#interrupt-cells = <2>;
};
sd0_clk: sd0-clk {
sd0_clk: sd0-clk-pins {
samsung,pins = "gpk0-0";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
sd0_cmd: sd0-cmd {
sd0_cmd: sd0-cmd-pins {
samsung,pins = "gpk0-1";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
sd0_cd: sd0-cd {
sd0_cd: sd0-cd-pins {
samsung,pins = "gpk0-2";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
sd0_rdqs: sd0-rdqs {
sd0_rdqs: sd0-rdqs-pins {
samsung,pins = "gpk0-7";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
sd0_bus1: sd0-bus-width1 {
sd0_bus1: sd0-bus-width1-pins {
samsung,pins = "gpk0-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
sd0_bus4: sd0-bus-width4 {
sd0_bus4: sd0-bus-width4-pins {
samsung,pins = "gpk0-4", "gpk0-5", "gpk0-6";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
sd0_bus8: sd0-bus-width8 {
sd0_bus8: sd0-bus-width8-pins {
samsung,pins = "gpl0-0", "gpl0-1", "gpl0-2", "gpl0-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
sd1_clk: sd1-clk {
sd1_clk: sd1-clk-pins {
samsung,pins = "gpk1-0";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
sd1_cmd: sd1-cmd {
sd1_cmd: sd1-cmd-pins {
samsung,pins = "gpk1-1";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
sd1_cd: sd1-cd {
sd1_cd: sd1-cd-pins {
samsung,pins = "gpk1-2";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
sd1_bus1: sd1-bus-width1 {
sd1_bus1: sd1-bus-width1-pins {
samsung,pins = "gpk1-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
sd1_bus4: sd1-bus-width4 {
sd1_bus4: sd1-bus-width4-pins {
samsung,pins = "gpk1-4", "gpk1-5", "gpk1-6";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
sd2_clk: sd2-clk {
sd2_clk: sd2-clk-pins {
samsung,pins = "gpk2-0";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
sd2_cmd: sd2-cmd {
sd2_cmd: sd2-cmd-pins {
samsung,pins = "gpk2-1";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
sd2_cd: sd2-cd {
sd2_cd: sd2-cd-pins {
samsung,pins = "gpk2-2";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
sd2_bus1: sd2-bus-width1 {
sd2_bus1: sd2-bus-width1-pins {
samsung,pins = "gpk2-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
sd2_bus4: sd2-bus-width4 {
sd2_bus4: sd2-bus-width4-pins {
samsung,pins = "gpk2-4", "gpk2-5", "gpk2-6";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
cam_port_b_io: cam-port-b-io {
cam_port_b_io: cam-port-b-io-pins {
samsung,pins = "gpm0-0", "gpm0-1", "gpm0-2", "gpm0-3",
"gpm0-4", "gpm0-5", "gpm0-6", "gpm0-7",
"gpm1-0", "gpm1-1", "gpm2-0", "gpm2-1";
@ -531,35 +506,35 @@
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
cam_port_b_clk_active: cam-port-b-clk-active {
cam_port_b_clk_active: cam-port-b-clk-active-pins {
samsung,pins = "gpm2-2";
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
cam_port_b_clk_idle: cam-port-b-clk-idle {
cam_port_b_clk_idle: cam-port-b-clk-idle-pins {
samsung,pins = "gpm2-2";
samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
fimc_is_i2c0: fimc-is-i2c0 {
fimc_is_i2c0: fimc-is-i2c0-pins {
samsung,pins = "gpm4-0", "gpm4-1";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
fimc_is_i2c1: fimc-is-i2c1 {
fimc_is_i2c1: fimc-is-i2c1-pins {
samsung,pins = "gpm4-2", "gpm4-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
fimc_is_uart: fimc-is-uart {
fimc_is_uart: fimc-is-uart-pins {
samsung,pins = "gpm3-5", "gpm3-7";
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;

2
arch/arm/boot/dts/exynos3250-rinato.dts
View File

@ -70,7 +70,7 @@
reg = <0x25>;
wakeup-source;
muic: max77836-muic {
extcon {
compatible = "maxim,max77836-muic";
};

4
arch/arm/boot/dts/exynos3250.dtsi
View File

@ -421,7 +421,7 @@
status = "disabled";
};
pdma0: pdma@12680000 {
pdma0: dma-controller@12680000 {
compatible = "arm,pl330", "arm,primecell";
reg = <0x12680000 0x1000>;
interrupts = <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
@ -432,7 +432,7 @@
#dma-requests = <32>;
};
pdma1: pdma@12690000 {
pdma1: dma-controller@12690000 {
compatible = "arm,pl330", "arm,primecell";
reg = <0x12690000 0x1000>;
interrupts = <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>;

6
arch/arm/boot/dts/exynos4.dtsi
View File

@ -669,7 +669,7 @@
status = "disabled";
};
pdma0: pdma@12680000 {
pdma0: dma-controller@12680000 {
compatible = "arm,pl330", "arm,primecell";
reg = <0x12680000 0x1000>;
interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
@ -680,7 +680,7 @@
#dma-requests = <32>;
};
pdma1: pdma@12690000 {
pdma1: dma-controller@12690000 {
compatible = "arm,pl330", "arm,primecell";
reg = <0x12690000 0x1000>;
interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
@ -691,7 +691,7 @@
#dma-requests = <32>;
};
mdma1: mdma@12850000 {
mdma1: dma-controller@12850000 {
compatible = "arm,pl330", "arm,primecell";
reg = <0x12850000 0x1000>;
interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;

30
arch/arm/boot/dts/exynos4210-i9100.dts
View File

@ -672,26 +672,26 @@
pinctrl-names = "default";
pinctrl-0 = <&sleep0>;
sleep0: sleep-states {
gpa0-0 {
sleep0: sleep-state {
gpa0-0-pin {
samsung,pins = "gpa0-0";
samsung,pin-con-pdn = <EXYNOS_PIN_PDN_INPUT>;
samsung,pin-pud-pdn = <EXYNOS_PIN_PULL_NONE>;
};
gpa0-1 {
gpa0-1-pin {
samsung,pins = "gpa0-1";
samsung,pin-con-pdn = <EXYNOS_PIN_PDN_OUT0>;
samsung,pin-pud-pdn = <EXYNOS_PIN_PULL_NONE>;
};
gpa0-2 {
gpa0-2-pin {
samsung,pins = "gpa0-2";
samsung,pin-con-pdn = <EXYNOS_PIN_PDN_INPUT>;
samsung,pin-pud-pdn = <EXYNOS_PIN_PULL_NONE>;
};
gpa0-3 {
gpa0-3-pin {
samsung,pins = "gpa0-3";
samsung,pin-con-pdn = <EXYNOS_PIN_PDN_OUT1>;
samsung,pin-pud-pdn = <EXYNOS_PIN_PULL_NONE>;
@ -700,19 +700,19 @@
};
&pinctrl_1 {
mhl_int: mhl-int {
mhl_int: mhl-int-pins {
samsung,pins = "gpf3-5";
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
};
i2c_mhl_bus: i2c-mhl-bus {
i2c_mhl_bus: i2c-mhl-bus-pins {
samsung,pins = "gpf0-4", "gpf0-6";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
usb_sel: usb-sel {
usb_sel: usb-sel-pins {
samsung,pins = "gpl0-6";
samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
@ -720,7 +720,7 @@
samsung,pin-val = <0>;
};
bt_en: bt-en {
bt_en: bt-en-pins {
samsung,pins = "gpl0-4";
samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
@ -728,7 +728,7 @@
samsung,pin-val = <0>;
};
bt_res: bt-res {
bt_res: bt-res-pins {
samsung,pins = "gpl1-0";
samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
@ -736,7 +736,7 @@
samsung,pin-val = <0>;
};
otg_gp: otg-gp {
otg_gp: otg-gp-pins {
samsung,pins = "gpx3-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
@ -744,23 +744,23 @@
samsung,pin-val = <0>;
};
mag_mhl_gpio: mag-mhl {
mag_mhl_gpio: mag-mhl-pins {
samsung,pins = "gpd0-2";
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
};
max8997_irq: max8997-irq {
max8997_irq: max8997-irq-pins {
samsung,pins = "gpx0-7";
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
};
max17042_fuel_irq: max17042-fuel-irq {
max17042_fuel_irq: max17042-fuel-irq-pins {
samsung,pins = "gpx2-3";
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
};
tsp224_irq: tsp224-irq {
tsp224_irq: tsp224-irq-pins {
samsung,pins = "gpx0-4";
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
};

2
arch/arm/boot/dts/exynos4210-origen.dts
View File

@ -316,7 +316,7 @@
};
&pinctrl_1 {
max8997_irq: max8997-irq {
max8997_irq: max8997-irq-pins {
samsung,pins = "gpx0-3", "gpx0-4";
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
};

226
arch/arm/boot/dts/exynos4210-pinctrl.dtsi
View File

@ -14,7 +14,7 @@
#include <dt-bindings/pinctrl/samsung.h>
&pinctrl_0 {
gpa0: gpa0 {
gpa0: gpa0-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@ -22,7 +22,7 @@
#interrupt-cells = <2>;
};
gpa1: gpa1 {
gpa1: gpa1-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@ -30,7 +30,7 @@
#interrupt-cells = <2>;
};
gpb: gpb {
gpb: gpb-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@ -38,7 +38,7 @@
#interrupt-cells = <2>;
};
gpc0: gpc0 {
gpc0: gpc0-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@ -46,7 +46,7 @@
#interrupt-cells = <2>;
};
gpc1: gpc1 {
gpc1: gpc1-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@ -54,7 +54,7 @@
#interrupt-cells = <2>;
};
gpd0: gpd0 {
gpd0: gpd0-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@ -62,7 +62,7 @@
#interrupt-cells = <2>;
};
gpd1: gpd1 {
gpd1: gpd1-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@ -70,7 +70,7 @@
#interrupt-cells = <2>;
};
gpe0: gpe0 {
gpe0: gpe0-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@ -78,7 +78,7 @@
#interrupt-cells = <2>;
};
gpe1: gpe1 {
gpe1: gpe1-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@ -86,7 +86,7 @@
#interrupt-cells = <2>;
};
gpe2: gpe2 {
gpe2: gpe2-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@ -94,7 +94,7 @@
#interrupt-cells = <2>;
};
gpe3: gpe3 {
gpe3: gpe3-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@ -102,7 +102,7 @@
#interrupt-cells = <2>;
};
gpe4: gpe4 {
gpe4: gpe4-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@ -110,7 +110,7 @@
#interrupt-cells = <2>;
};
gpf0: gpf0 {
gpf0: gpf0-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@ -118,7 +118,7 @@
#interrupt-cells = <2>;
};
gpf1: gpf1 {
gpf1: gpf1-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@ -126,7 +126,7 @@
#interrupt-cells = <2>;
};
gpf2: gpf2 {
gpf2: gpf2-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@ -134,7 +134,7 @@
#interrupt-cells = <2>;
};
gpf3: gpf3 {
gpf3: gpf3-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@ -142,112 +142,112 @@
#interrupt-cells = <2>;
};
uart0_data: uart0-data {
uart0_data: uart0-data-pins {
samsung,pins = "gpa0-0", "gpa0-1";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
uart0_fctl: uart0-fctl {
uart0_fctl: uart0-fctl-pins {
samsung,pins = "gpa0-2", "gpa0-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
uart1_data: uart1-data {
uart1_data: uart1-data-pins {
samsung,pins = "gpa0-4", "gpa0-5";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
uart1_fctl: uart1-fctl {
uart1_fctl: uart1-fctl-pins {
samsung,pins = "gpa0-6", "gpa0-7";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
i2c2_bus: i2c2-bus {
i2c2_bus: i2c2-bus-pins {
samsung,pins = "gpa0-6", "gpa0-7";
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
uart2_data: uart2-data {
uart2_data: uart2-data-pins {
samsung,pins = "gpa1-0", "gpa1-1";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
uart2_fctl: uart2-fctl {
uart2_fctl: uart2-fctl-pins {
samsung,pins = "gpa1-2", "gpa1-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
uart_audio_a: uart-audio-a {
uart_audio_a: uart-audio-a-pins {
samsung,pins = "gpa1-0", "gpa1-1";
samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
i2c3_bus: i2c3-bus {
i2c3_bus: i2c3-bus-pins {
samsung,pins = "gpa1-2", "gpa1-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
uart3_data: uart3-data {
uart3_data: uart3-data-pins {
samsung,pins = "gpa1-4", "gpa1-5";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
uart_audio_b: uart-audio-b {
uart_audio_b: uart-audio-b-pins {
samsung,pins = "gpa1-4", "gpa1-5";
samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
spi0_bus: spi0-bus {
spi0_bus: spi0-bus-pins {
samsung,pins = "gpb-0", "gpb-2", "gpb-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
i2c4_bus: i2c4-bus {
i2c4_bus: i2c4-bus-pins {
samsung,pins = "gpb-2", "gpb-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
spi1_bus: spi1-bus {
spi1_bus: spi1-bus-pins {
samsung,pins = "gpb-4", "gpb-6", "gpb-7";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
i2c5_bus: i2c5-bus {
i2c5_bus: i2c5-bus-pins {
samsung,pins = "gpb-6", "gpb-7";
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
i2s1_bus: i2s1-bus {
i2s1_bus: i2s1-bus-pins {
samsung,pins = "gpc0-0", "gpc0-1", "gpc0-2", "gpc0-3",
"gpc0-4";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
@ -255,7 +255,7 @@
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
pcm1_bus: pcm1-bus {
pcm1_bus: pcm1-bus-pins {
samsung,pins = "gpc0-0", "gpc0-1", "gpc0-2", "gpc0-3",
"gpc0-4";
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
@ -263,7 +263,7 @@
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
ac97_bus: ac97-bus {
ac97_bus: ac97-bus-pins {
samsung,pins = "gpc0-0", "gpc0-1", "gpc0-2", "gpc0-3",
"gpc0-4";
samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
@ -271,7 +271,7 @@
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
i2s2_bus: i2s2-bus {
i2s2_bus: i2s2-bus-pins {
samsung,pins = "gpc1-0", "gpc1-1", "gpc1-2", "gpc1-3",
"gpc1-4";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
@ -279,7 +279,7 @@
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
pcm2_bus: pcm2-bus {
pcm2_bus: pcm2-bus-pins {
samsung,pins = "gpc1-0", "gpc1-1", "gpc1-2", "gpc1-3",
"gpc1-4";
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
@ -287,105 +287,105 @@
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
spdif_bus: spdif-bus {
spdif_bus: spdif-bus-pins {
samsung,pins = "gpc1-0", "gpc1-1";
samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
i2c6_bus: i2c6-bus {
i2c6_bus: i2c6-bus-pins {
samsung,pins = "gpc1-3", "gpc1-4";
samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
spi2_bus: spi2-bus {
spi2_bus: spi2-bus-pins {
samsung,pins = "gpc1-1", "gpc1-2", "gpc1-3", "gpc1-4";
samsung,pin-function = <EXYNOS_PIN_FUNC_5>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
i2c7_bus: i2c7-bus {
i2c7_bus: i2c7-bus-pins {
samsung,pins = "gpd0-2", "gpd0-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
i2c0_bus: i2c0-bus {
i2c0_bus: i2c0-bus-pins {
samsung,pins = "gpd1-0", "gpd1-1";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
i2c1_bus: i2c1-bus {
i2c1_bus: i2c1-bus-pins {
samsung,pins = "gpd1-2", "gpd1-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
pwm0_out: pwm0-out {
pwm0_out: pwm0-out-pins {
samsung,pins = "gpd0-0";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
pwm1_out: pwm1-out {
pwm1_out: pwm1-out-pins {
samsung,pins = "gpd0-1";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
pwm2_out: pwm2-out {
pwm2_out: pwm2-out-pins {
samsung,pins = "gpd0-2";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
pwm3_out: pwm3-out {
pwm3_out: pwm3-out-pins {
samsung,pins = "gpd0-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
lcd_ctrl: lcd-ctrl {
lcd_ctrl: lcd-ctrl-pins {
samsung,pins = "gpd0-0", "gpd0-1";
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
lcd_sync: lcd-sync {
lcd_sync: lcd-sync-pins {
samsung,pins = "gpf0-0", "gpf0-1";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
lcd_en: lcd-en {
lcd_en: lcd-en-pins {
samsung,pins = "gpe3-4";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
lcd_clk: lcd-clk {
lcd_clk: lcd-clk-pins {
samsung,pins = "gpf0-0", "gpf0-1", "gpf0-2", "gpf0-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
lcd_data16: lcd-data-width16 {
lcd_data16: lcd-data-width16-pins {
samsung,pins = "gpf0-7", "gpf1-0", "gpf1-1", "gpf1-2",
"gpf1-3", "gpf1-6", "gpf1-7", "gpf2-0",
"gpf2-1", "gpf2-2", "gpf2-3", "gpf2-7",
@ -395,7 +395,7 @@
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
lcd_data18: lcd-data-width18 {
lcd_data18: lcd-data-width18-pins {
samsung,pins = "gpf0-6", "gpf0-7", "gpf1-0", "gpf1-1",
"gpf1-2", "gpf1-3", "gpf1-6", "gpf1-7",
"gpf2-0", "gpf2-1", "gpf2-2", "gpf2-3",
@ -406,7 +406,7 @@
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
lcd_data24: lcd-data-width24 {
lcd_data24: lcd-data-width24-pins {
samsung,pins = "gpf0-4", "gpf0-5", "gpf0-6", "gpf0-7",
"gpf1-0", "gpf1-1", "gpf1-2", "gpf1-3",
"gpf1-4", "gpf1-5", "gpf1-6", "gpf1-7",
@ -420,7 +420,7 @@
};
&pinctrl_1 {
gpj0: gpj0 {
gpj0: gpj0-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@ -428,7 +428,7 @@
#interrupt-cells = <2>;
};
gpj1: gpj1 {
gpj1: gpj1-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@ -436,7 +436,7 @@
#interrupt-cells = <2>;
};
gpk0: gpk0 {
gpk0: gpk0-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@ -444,7 +444,7 @@
#interrupt-cells = <2>;
};
gpk1: gpk1 {
gpk1: gpk1-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@ -452,7 +452,7 @@
#interrupt-cells = <2>;
};
gpk2: gpk2 {
gpk2: gpk2-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@ -460,7 +460,7 @@
#interrupt-cells = <2>;
};
gpk3: gpk3 {
gpk3: gpk3-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@ -468,7 +468,7 @@
#interrupt-cells = <2>;
};
gpl0: gpl0 {
gpl0: gpl0-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@ -476,7 +476,7 @@
#interrupt-cells = <2>;
};
gpl1: gpl1 {
gpl1: gpl1-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@ -484,7 +484,7 @@
#interrupt-cells = <2>;
};
gpl2: gpl2 {
gpl2: gpl2-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@ -492,42 +492,42 @@
#interrupt-cells = <2>;
};
gpy0: gpy0 {
gpy0: gpy0-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
};
gpy1: gpy1 {
gpy1: gpy1-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
};
gpy2: gpy2 {
gpy2: gpy2-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
};
gpy3: gpy3 {
gpy3: gpy3-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
};
gpy4: gpy4 {
gpy4: gpy4-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
};
gpy5: gpy5 {
gpy5: gpy5-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
};
gpy6: gpy6 {
gpy6: gpy6-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
};
gpx0: gpx0 {
gpx0: gpx0-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@ -544,7 +544,7 @@
#interrupt-cells = <2>;
};
gpx1: gpx1 {
gpx1: gpx1-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@ -561,7 +561,7 @@
#interrupt-cells = <2>;
};
gpx2: gpx2 {
gpx2: gpx2-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@ -569,7 +569,7 @@
#interrupt-cells = <2>;
};
gpx3: gpx3 {
gpx3: gpx3-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@ -577,238 +577,238 @@
#interrupt-cells = <2>;
};
sd0_clk: sd0-clk {
sd0_clk: sd0-clk-pins {
samsung,pins = "gpk0-0";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
sd0_cmd: sd0-cmd {
sd0_cmd: sd0-cmd-pins {
samsung,pins = "gpk0-1";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
sd0_cd: sd0-cd {
sd0_cd: sd0-cd-pins {
samsung,pins = "gpk0-2";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
sd0_bus1: sd0-bus-width1 {
sd0_bus1: sd0-bus-width1-pins {
samsung,pins = "gpk0-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
sd0_bus4: sd0-bus-width4 {
sd0_bus4: sd0-bus-width4-pins {
samsung,pins = "gpk0-3", "gpk0-4", "gpk0-5", "gpk0-6";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
sd0_bus8: sd0-bus-width8 {
sd0_bus8: sd0-bus-width8-pins {
samsung,pins = "gpk1-3", "gpk1-4", "gpk1-5", "gpk1-6";
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
sd4_clk: sd4-clk {
sd4_clk: sd4-clk-pins {
samsung,pins = "gpk0-0";
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
sd4_cmd: sd4-cmd {
sd4_cmd: sd4-cmd-pins {
samsung,pins = "gpk0-1";
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
sd4_cd: sd4-cd {
sd4_cd: sd4-cd-pins {
samsung,pins = "gpk0-2";
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
sd4_bus1: sd4-bus-width1 {
sd4_bus1: sd4-bus-width1-pins {
samsung,pins = "gpk0-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
sd4_bus4: sd4-bus-width4 {
sd4_bus4: sd4-bus-width4-pins {
samsung,pins = "gpk0-3", "gpk0-4", "gpk0-5", "gpk0-6";
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
sd4_bus8: sd4-bus-width8 {
sd4_bus8: sd4-bus-width8-pins {
samsung,pins = "gpk1-3", "gpk1-4", "gpk1-5", "gpk1-6";
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
sd1_clk: sd1-clk {
sd1_clk: sd1-clk-pins {
samsung,pins = "gpk1-0";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
sd1_cmd: sd1-cmd {
sd1_cmd: sd1-cmd-pins {
samsung,pins = "gpk1-1";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
sd1_cd: sd1-cd {
sd1_cd: sd1-cd-pins {
samsung,pins = "gpk1-2";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
sd1_bus1: sd1-bus-width1 {
sd1_bus1: sd1-bus-width1-pins {
samsung,pins = "gpk1-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
sd1_bus4: sd1-bus-width4 {
sd1_bus4: sd1-bus-width4-pins {
samsung,pins = "gpk1-3", "gpk1-4", "gpk1-5", "gpk1-6";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
sd2_clk: sd2-clk {
sd2_clk: sd2-clk-pins {
samsung,pins = "gpk2-0";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
sd2_cmd: sd2-cmd {
sd2_cmd: sd2-cmd-pins {
samsung,pins = "gpk2-1";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
sd2_cd: sd2-cd {
sd2_cd: sd2-cd-pins {
samsung,pins = "gpk2-2";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
sd2_bus1: sd2-bus-width1 {
sd2_bus1: sd2-bus-width1-pins {
samsung,pins = "gpk2-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
sd2_bus4: sd2-bus-width4 {
sd2_bus4: sd2-bus-width4-pins {
samsung,pins = "gpk2-3", "gpk2-4", "gpk2-5", "gpk2-6";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
sd2_bus8: sd2-bus-width8 {
sd2_bus8: sd2-bus-width8-pins {
samsung,pins = "gpk3-3", "gpk3-4", "gpk3-5", "gpk3-6";
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
sd3_clk: sd3-clk {
sd3_clk: sd3-clk-pins {
samsung,pins = "gpk3-0";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
sd3_cmd: sd3-cmd {
sd3_cmd: sd3-cmd-pins {
samsung,pins = "gpk3-1";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
sd3_cd: sd3-cd {
sd3_cd: sd3-cd-pins {
samsung,pins = "gpk3-2";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
sd3_bus1: sd3-bus-width1 {
sd3_bus1: sd3-bus-width1-pins {
samsung,pins = "gpk3-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
sd3_bus4: sd3-bus-width4 {
sd3_bus4: sd3-bus-width4-pins {
samsung,pins = "gpk3-3", "gpk3-4", "gpk3-5", "gpk3-6";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
eint0: ext-int0 {
eint0: ext-int0-pins {
samsung,pins = "gpx0-0";
samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
eint8: ext-int8 {
eint8: ext-int8-pins {
samsung,pins = "gpx1-0";
samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
eint15: ext-int15 {
eint15: ext-int15-pins {
samsung,pins = "gpx1-7";
samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
eint16: ext-int16 {
eint16: ext-int16-pins {
samsung,pins = "gpx2-0";
samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
eint31: ext-int31 {
eint31: ext-int31-pins {
samsung,pins = "gpx3-7";
samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
cam_port_a_io: cam-port-a-io {
cam_port_a_io: cam-port-a-io-pins {
samsung,pins = "gpj0-0", "gpj0-1", "gpj0-2", "gpj0-3",
"gpj0-4", "gpj0-5", "gpj0-6", "gpj0-7",
"gpj1-0", "gpj1-1", "gpj1-2", "gpj1-4";
@ -817,21 +817,21 @@
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
cam_port_a_clk_active: cam-port-a-clk-active {
cam_port_a_clk_active: cam-port-a-clk-active-pins {
samsung,pins = "gpj1-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
cam_port_a_clk_idle: cam-port-a-clk-idle {
cam_port_a_clk_idle: cam-port-a-clk-idle-pins {
samsung,pins = "gpj1-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
hdmi_cec: hdmi-cec {
hdmi_cec: hdmi-cec-pins {
samsung,pins = "gpx3-6";
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
@ -840,12 +840,12 @@
};
&pinctrl_2 {
gpz: gpz {
gpz: gpz-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
};
i2s0_bus: i2s0-bus {
i2s0_bus: i2s0-bus-pins {
samsung,pins = "gpz-0", "gpz-1", "gpz-2", "gpz-3",
"gpz-4", "gpz-5", "gpz-6";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
@ -853,7 +853,7 @@
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
pcm0_bus: pcm0-bus {
pcm0_bus: pcm0-bus-pins {
samsung,pins = "gpz-0", "gpz-1", "gpz-2", "gpz-3",
"gpz-4";
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;

4
arch/arm/boot/dts/exynos4210-smdkv310.dts
View File

@ -152,14 +152,14 @@
};
&pinctrl_1 {
keypad_rows: keypad-rows {
keypad_rows: keypad-rows-pins {
samsung,pins = "gpx2-0", "gpx2-1";
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
keypad_cols: keypad-cols {
keypad_cols: keypad-cols-pins {
samsung,pins = "gpx1-0", "gpx1-1", "gpx1-2", "gpx1-3",
"gpx1-4", "gpx1-5", "gpx1-6", "gpx1-7";
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;

6
arch/arm/boot/dts/exynos4210-trats.dts
View File

@ -464,19 +464,19 @@
};
&pinctrl_1 {
bt_shutdown: bt-shutdown {
bt_shutdown: bt-shutdown-pins {
samsung,pins = "gpl1-0";
samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
};
bt_host_wakeup: bt-host-wakeup {
bt_host_wakeup: bt-host-wakeup-pins {
samsung,pins = "gpx2-6";
samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
};
bt_device_wakeup: bt-device-wakeup {
bt_device_wakeup: bt-device-wakeup-pins {
samsung,pins = "gpx3-1";
samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;

14
arch/arm/boot/dts/exynos4210-universal_c210.dts
View File

@ -533,37 +533,37 @@
};
&pinctrl_1 {
bt_shutdown: bt-shutdown {
bt_shutdown: bt-shutdown-pins {
samsung,pins = "gpe1-4";
samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
};
bt_host_wakeup: bt-host-wakeup {
bt_host_wakeup: bt-host-wakeup-pins {
samsung,pins = "gpx2-6";
samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
};
bt_device_wakeup: bt-device-wakeup {
bt_device_wakeup: bt-device-wakeup-pins {
samsung,pins = "gpx3-1";
samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
};
lp3974_irq: lp3974-irq {
lp3974_irq: lp3974-irq-pins {
samsung,pins = "gpx0-7", "gpx2-7";
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
};
hdmi_hpd: hdmi-hpd {
hdmi_hpd: hdmi-hpd-pins {
samsung,pins = "gpx3-7";
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
};
};
&pinctrl_0 {
i2c_ddc_bus: i2c-ddc-bus {
i2c_ddc_bus: i2c-ddc-bus-pins {
samsung,pins = "gpe4-2", "gpe4-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
@ -659,7 +659,7 @@
};
&soc {
mdma0: mdma@12840000 {
mdma0: dma-controller@12840000 {
compatible = "arm,pl330", "arm,primecell";
reg = <0x12840000 0x1000>;
interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;

2
arch/arm/boot/dts/exynos4210.dtsi
View File

@ -527,8 +527,6 @@
compatible = "samsung,exynos4210-tmu";
clocks = <&clock CLK_TMU_APBIF>;
clock-names = "tmu_apbif";
samsung,tmu_gain = <15>;
samsung,tmu_reference_voltage = <7>;
};
#include "exynos4210-pinctrl.dtsi"

4
arch/arm/boot/dts/exynos4412-galaxy-s3.dtsi
View File

@ -151,13 +151,13 @@
};
&pinctrl_0 {
camera_flash_host: camera-flash-host {
camera_flash_host: camera-flash-host-pins {
samsung,pins = "gpj1-0";
samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
samsung,pin-val = <0>;
};
camera_flash_isp: camera-flash-isp {
camera_flash_isp: camera-flash-isp-pins {
samsung,pins = "gpj1-0";
samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
samsung,pin-val = <1>;

2
arch/arm/boot/dts/exynos4412-itop-elite.dts
View File

@ -192,7 +192,7 @@
};
&pinctrl_1 {
ether-reset {
ether-reset-pins {
samsung,pins = "gpc0-1";
samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;

2
arch/arm/boot/dts/exynos4412-itop-scp-core.dtsi
View File

@ -484,7 +484,7 @@
};
&pinctrl_1 {
hsic_reset: hsic-reset {
hsic_reset: hsic-reset-pins {
samsung,pins = "gpm2-4";
samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;

30
arch/arm/boot/dts/exynos4412-midas.dtsi
View File

@ -987,19 +987,19 @@
pinctrl-names = "default";
pinctrl-0 = <&sleep0>;
mhl_int: mhl-int {
mhl_int: mhl-int-pins {
samsung,pins = "gpf3-5";
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
};
i2c_mhl_bus: i2c-mhl-bus {
i2c_mhl_bus: i2c-mhl-bus-pins {
samsung,pins = "gpf0-4", "gpf0-6";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
sleep0: sleep-states {
sleep0: sleep-state {
PIN_SLP(gpa0-0, INPUT, NONE);
PIN_SLP(gpa0-1, OUT0, NONE);
PIN_SLP(gpa0-2, INPUT, NONE);
@ -1102,52 +1102,52 @@
pinctrl-names = "default";
pinctrl-0 = <&sleep1>;
gpio_keys: gpio-keys {
gpio_keys: gpio-keys-pins {
samsung,pins = "gpx0-1", "gpx2-2", "gpx2-7", "gpx3-3";
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
};
bt_shutdown: bt-shutdown {
bt_shutdown: bt-shutdown-pins {
samsung,pins = "gpl0-6";
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
};
bt_host_wakeup: bt-host-wakeup {
bt_host_wakeup: bt-host-wakeup-pins {
samsung,pins = "gpx2-6";
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
};
bt_device_wakeup: bt-device-wakeup {
bt_device_wakeup: bt-device-wakeup-pins {
samsung,pins = "gpx3-1";
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
};
max77686_irq: max77686-irq {
max77686_irq: max77686-irq-pins {
samsung,pins = "gpx0-7";
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
};
max77693_irq: max77693-irq {
max77693_irq: max77693-irq-pins {
samsung,pins = "gpx1-5";
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
};
max77693_fuel_irq: max77693-fuel-irq {
max77693_fuel_irq: max77693-fuel-irq-pins {
samsung,pins = "gpx2-3";
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
};
sdhci2_cd: sdhci2-cd-irq {
sdhci2_cd: sdhci2-cd-irq-pins {
samsung,pins = "gpx3-4";
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
};
hdmi_hpd: hdmi-hpd {
hdmi_hpd: hdmi-hpd-pins {
samsung,pins = "gpx3-7";
samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
};
sleep1: sleep-states {
sleep1: sleep-state {
PIN_SLP(gpk0-0, PREV, NONE);
PIN_SLP(gpk0-1, PREV, NONE);
PIN_SLP(gpk0-2, OUT0, NONE);
@ -1300,7 +1300,7 @@
pinctrl-names = "default";
pinctrl-0 = <&sleep2>;
sleep2: sleep-states {
sleep2: sleep-state {
PIN_SLP(gpz-0, INPUT, DOWN);
PIN_SLP(gpz-1, INPUT, DOWN);
PIN_SLP(gpz-2, INPUT, DOWN);
@ -1315,7 +1315,7 @@
pinctrl-names = "default";
pinctrl-0 = <&sleep3>;
sleep3: sleep-states {
sleep3: sleep-state {
PIN_SLP(gpv0-0, INPUT, DOWN);
PIN_SLP(gpv0-1, INPUT, DOWN);
PIN_SLP(gpv0-2, INPUT, DOWN);

8
arch/arm/boot/dts/exynos4412-odroid-common.dtsi
View File

@ -172,24 +172,24 @@
};
&pinctrl_1 {
gpio_power_key: power-key {
gpio_power_key: power-key-pins {
samsung,pins = "gpx1-3";
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
};
max77686_irq: max77686-irq {
max77686_irq: max77686-irq-pins {
samsung,pins = "gpx3-2";
samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
hdmi_hpd: hdmi-hpd {
hdmi_hpd: hdmi-hpd-pins {
samsung,pins = "gpx3-7";
samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
};
emmc_rstn: emmc-rstn {
emmc_rstn: emmc-rstn-pins {
samsung,pins = "gpk1-2";
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
};

2
arch/arm/boot/dts/exynos4412-odroidx.dts
View File

@ -112,7 +112,7 @@
};
&pinctrl_1 {
gpio_home_key: home-key {
gpio_home_key: home-key-pins {
samsung,pins = "gpx2-2";
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
};

4
arch/arm/boot/dts/exynos4412-origen.dts
View File

@ -506,14 +506,14 @@
};
&pinctrl_1 {
keypad_rows: keypad-rows {
keypad_rows: keypad-rows-pins {
samsung,pins = "gpx2-0", "gpx2-1", "gpx2-2";
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
keypad_cols: keypad-cols {
keypad_cols: keypad-cols-pins {
samsung,pins = "gpx1-0", "gpx1-1";
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;

78
arch/arm/boot/dts/exynos4412-p4note.dtsi
View File

@ -16,6 +16,7 @@
#include <dt-bindings/input/linux-event-codes.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/pinctrl/samsung.h>
#include <dt-bindings/power/summit,smb347-charger.h>
/ {
compatible = "samsung,p4note", "samsung,exynos4412", "samsung,exynos4";
@ -114,6 +115,17 @@
clock-names = "ext_clock";
};
battery_cell: battery-cell {
compatible = "simple-battery";
device-chemistry = "lithium-ion";
constant-charge-current-max-microamp = <2200000>;
precharge-current-microamp = <250000>;
charge-term-current-microamp = <250000>;
constant-charge-voltage-max-microvolt = <4200000>;
power-supplies = <&power_supply>;
};
i2c-gpio-1 {
compatible = "i2c-gpio";
sda-gpios = <&gpy2 4 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
@ -182,6 +194,28 @@
};
};
};
i2c-gpio-4 {
compatible = "i2c-gpio";
sda-gpios = <&gpm2 0 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
scl-gpios = <&gpm2 1 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
i2c-gpio,delay-us = <2>;
#address-cells = <1>;
#size-cells = <0>;
power_supply: charger@6 {
compatible = "summit,smb347";
reg = <0x6>;
summit,enable-usb-charging;
summit,enable-charge-control = <SMB3XX_CHG_ENABLE_SW>;
summit,fast-voltage-threshold-microvolt = <2600000>;
summit,chip-temperature-threshold-celsius = <130>;
summit,usb-current-limit-microamp = <1800000>;
monitored-battery = <&battery_cell>;
};
};
};
&adc {
@ -641,19 +675,19 @@
pinctrl-names = "default";
pinctrl-0 = <&sleep0>;
tsp_reg_gpio_2: tsp-reg-gpio-2 {
tsp_reg_gpio_2: tsp-reg-gpio-2-pins {
samsung,pins = "gpb-5";
samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
};
tsp_reg_gpio_3: tsp-reg-gpio-3 {
tsp_reg_gpio_3: tsp-reg-gpio-3-pins {
samsung,pins = "gpb-7";
samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
};
sleep0: sleep-states {
sleep0: sleep-state {
PIN_SLP(gpa0-0, INPUT, NONE);
PIN_SLP(gpa0-1, OUT0, NONE);
PIN_SLP(gpa0-2, INPUT, NONE);
@ -755,19 +789,19 @@
pinctrl-names = "default";
pinctrl-0 = <&sleep1>;
sd3_wifi: sd3-wifi {
sd3_wifi: sd3-wifi-pins {
samsung,pins = "gpk3-3", "gpk3-4", "gpk3-5", "gpk3-6";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
};
bt_shutdown: bt-shutdown {
bt_shutdown: bt-shutdown-pins {
samsung,pins = "gpl0-6";
samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
};
uart_sel: uart-sel {
uart_sel: uart-sel-pins {
samsung,pins = "gpl2-7";
samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
@ -775,82 +809,82 @@
/* 0 = CP, 1 = AP (serial output) */
};
tsp_rst: tsp-rst {
tsp_rst: tsp-rst-pins {
samsung,pins = "gpm0-4";
samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
};
tsp_irq: tsp-irq {
tsp_irq: tsp-irq-pins {
samsung,pins = "gpm2-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
};
wifi_reset: wifi-reset {
wifi_reset: wifi-reset-pins {
samsung,pins = "gpm3-5";
samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
};
tsp_reg_gpio_1: tsp-reg-gpio-1 {
tsp_reg_gpio_1: tsp-reg-gpio-1-pins {
samsung,pins = "gpm4-5";
samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
};
ak8975_irq: ak8975-irq {
ak8975_irq: ak8975-irq-pins {
samsung,pins = "gpm4-7";
samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
};
stmpe_adc_irq: stmpe-adc-irq {
stmpe_adc_irq: stmpe-adc-irq-pins {
samsung,pins = "gpx0-1";
samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
};
max77686_irq: max77686-irq {
max77686_irq: max77686-irq-pins {
samsung,pins = "gpx0-7";
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
};
gpio_keys: gpio-keys {
gpio_keys: gpio-keys-pins {
samsung,pins = "gpx2-2", "gpx2-7", "gpx3-3";
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
};
fuel_alert_irq: fuel-alert-irq {
fuel_alert_irq: fuel-alert-irq-pins {
samsung,pins = "gpx2-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
};
wifi_host_wake: wifi-host-wake {
wifi_host_wake: wifi-host-wake-pins {
samsung,pins = "gpx2-5";
samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
};
bt_host_wakeup: bt-host-wakeup {
bt_host_wakeup: bt-host-wakeup-pins {
samsung,pins = "gpx2-6";
samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
};
bt_device_wakeup: bt-device-wakeup {
bt_device_wakeup: bt-device-wakeup-pins {
samsung,pins = "gpx3-1";
samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
};
sdhci2_cd: sdhci2-cd {
sdhci2_cd: sdhci2-cd-pins {
samsung,pins = "gpx3-4";
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
};
sleep1: sleep-states {
sleep1: sleep-state {
PIN_SLP(gpk0-0, PREV, NONE);
PIN_SLP(gpk0-1, PREV, NONE);
PIN_SLP(gpk0-2, PREV, NONE);
@ -1004,7 +1038,7 @@
pinctrl-names = "default";
pinctrl-0 = <&sleep2>;
sleep2: sleep-states {
sleep2: sleep-state {
PIN_SLP(gpz-0, INPUT, DOWN);
PIN_SLP(gpz-1, INPUT, DOWN);
PIN_SLP(gpz-2, INPUT, DOWN);
@ -1019,7 +1053,7 @@
pinctrl-names = "default";
pinctrl-0 = <&sleep3>;
sleep3: sleep-states {
sleep3: sleep-state {
PIN_SLP(gpv0-0, INPUT, DOWN);
PIN_SLP(gpv0-1, INPUT, DOWN);
PIN_SLP(gpv0-2, INPUT, DOWN);

252
arch/arm/boot/dts/exynos4412-pinctrl.dtsi
View File

@ -19,7 +19,7 @@
}
&pinctrl_0 {
gpa0: gpa0 {
gpa0: gpa0-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@ -27,7 +27,7 @@
#interrupt-cells = <2>;
};
gpa1: gpa1 {
gpa1: gpa1-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@ -35,7 +35,7 @@
#interrupt-cells = <2>;
};
gpb: gpb {
gpb: gpb-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@ -43,7 +43,7 @@
#interrupt-cells = <2>;
};
gpc0: gpc0 {
gpc0: gpc0-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@ -51,7 +51,7 @@
#interrupt-cells = <2>;
};
gpc1: gpc1 {
gpc1: gpc1-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@ -59,7 +59,7 @@
#interrupt-cells = <2>;
};
gpd0: gpd0 {
gpd0: gpd0-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@ -67,7 +67,7 @@
#interrupt-cells = <2>;
};
gpd1: gpd1 {
gpd1: gpd1-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@ -75,7 +75,7 @@
#interrupt-cells = <2>;
};
gpf0: gpf0 {
gpf0: gpf0-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@ -83,7 +83,7 @@
#interrupt-cells = <2>;
};
gpf1: gpf1 {
gpf1: gpf1-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@ -91,7 +91,7 @@
#interrupt-cells = <2>;
};
gpf2: gpf2 {
gpf2: gpf2-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@ -99,7 +99,7 @@
#interrupt-cells = <2>;
};
gpf3: gpf3 {
gpf3: gpf3-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@ -107,7 +107,7 @@
#interrupt-cells = <2>;
};
gpj0: gpj0 {
gpj0: gpj0-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@ -115,7 +115,7 @@
#interrupt-cells = <2>;
};
gpj1: gpj1 {
gpj1: gpj1-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@ -123,112 +123,112 @@
#interrupt-cells = <2>;
};
uart0_data: uart0-data {
uart0_data: uart0-data-pins {
samsung,pins = "gpa0-0", "gpa0-1";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
uart0_fctl: uart0-fctl {
uart0_fctl: uart0-fctl-pins {
samsung,pins = "gpa0-2", "gpa0-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
uart1_data: uart1-data {
uart1_data: uart1-data-pins {
samsung,pins = "gpa0-4", "gpa0-5";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
uart1_fctl: uart1-fctl {
uart1_fctl: uart1-fctl-pins {
samsung,pins = "gpa0-6", "gpa0-7";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
i2c2_bus: i2c2-bus {
i2c2_bus: i2c2-bus-pins {
samsung,pins = "gpa0-6", "gpa0-7";
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
uart2_data: uart2-data {
uart2_data: uart2-data-pins {
samsung,pins = "gpa1-0", "gpa1-1";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
uart2_fctl: uart2-fctl {
uart2_fctl: uart2-fctl-pins {
samsung,pins = "gpa1-2", "gpa1-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
uart_audio_a: uart-audio-a {
uart_audio_a: uart-audio-a-pins {
samsung,pins = "gpa1-0", "gpa1-1";
samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
i2c3_bus: i2c3-bus {
i2c3_bus: i2c3-bus-pins {
samsung,pins = "gpa1-2", "gpa1-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
uart3_data: uart3-data {
uart3_data: uart3-data-pins {
samsung,pins = "gpa1-4", "gpa1-5";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
uart_audio_b: uart-audio-b {
uart_audio_b: uart-audio-b-pins {
samsung,pins = "gpa1-4", "gpa1-5";
samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
spi0_bus: spi0-bus {
spi0_bus: spi0-bus-pins {
samsung,pins = "gpb-0", "gpb-2", "gpb-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
i2c4_bus: i2c4-bus {
i2c4_bus: i2c4-bus-pins {
samsung,pins = "gpb-0", "gpb-1";
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
spi1_bus: spi1-bus {
spi1_bus: spi1-bus-pins {
samsung,pins = "gpb-4", "gpb-6", "gpb-7";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
i2c5_bus: i2c5-bus {
i2c5_bus: i2c5-bus-pins {
samsung,pins = "gpb-2", "gpb-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
i2s1_bus: i2s1-bus {
i2s1_bus: i2s1-bus-pins {
samsung,pins = "gpc0-0", "gpc0-1", "gpc0-2", "gpc0-3",
"gpc0-4";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
@ -236,7 +236,7 @@
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
pcm1_bus: pcm1-bus {
pcm1_bus: pcm1-bus-pins {
samsung,pins = "gpc0-0", "gpc0-1", "gpc0-2", "gpc0-3",
"gpc0-4";
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
@ -244,7 +244,7 @@
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
ac97_bus: ac97-bus {
ac97_bus: ac97-bus-pins {
samsung,pins = "gpc0-0", "gpc0-1", "gpc0-2", "gpc0-3",
"gpc0-4";
samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
@ -252,7 +252,7 @@
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
i2s2_bus: i2s2-bus {
i2s2_bus: i2s2-bus-pins {
samsung,pins = "gpc1-0", "gpc1-1", "gpc1-2", "gpc1-3",
"gpc1-4";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
@ -260,7 +260,7 @@
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
pcm2_bus: pcm2-bus {
pcm2_bus: pcm2-bus-pins {
samsung,pins = "gpc1-0", "gpc1-1", "gpc1-2", "gpc1-3",
"gpc1-4";
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
@ -268,105 +268,105 @@
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
spdif_bus: spdif-bus {
spdif_bus: spdif-bus-pins {
samsung,pins = "gpc1-0", "gpc1-1";
samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
i2c6_bus: i2c6-bus {
i2c6_bus: i2c6-bus-pins {
samsung,pins = "gpc1-3", "gpc1-4";
samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
spi2_bus: spi2-bus {
spi2_bus: spi2-bus-pins {
samsung,pins = "gpc1-1", "gpc1-3", "gpc1-4";
samsung,pin-function = <EXYNOS_PIN_FUNC_5>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
pwm0_out: pwm0-out {
pwm0_out: pwm0-out-pins {
samsung,pins = "gpd0-0";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
pwm1_out: pwm1-out {
pwm1_out: pwm1-out-pins {
samsung,pins = "gpd0-1";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
lcd_ctrl: lcd-ctrl {
lcd_ctrl: lcd-ctrl-pins {
samsung,pins = "gpd0-0", "gpd0-1";
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
i2c7_bus: i2c7-bus {
i2c7_bus: i2c7-bus-pins {
samsung,pins = "gpd0-2", "gpd0-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
pwm2_out: pwm2-out {
pwm2_out: pwm2-out-pins {
samsung,pins = "gpd0-2";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
pwm3_out: pwm3-out {
pwm3_out: pwm3-out-pins {
samsung,pins = "gpd0-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
i2c0_bus: i2c0-bus {
i2c0_bus: i2c0-bus-pins {
samsung,pins = "gpd1-0", "gpd1-1";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
mipi0_clk: mipi0-clk {
mipi0_clk: mipi0-clk-pins {
samsung,pins = "gpd1-0", "gpd1-1";
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
i2c1_bus: i2c1-bus {
i2c1_bus: i2c1-bus-pins {
samsung,pins = "gpd1-2", "gpd1-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
mipi1_clk: mipi1-clk {
mipi1_clk: mipi1-clk-pins {
samsung,pins = "gpd1-2", "gpd1-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
lcd_clk: lcd-clk {
lcd_clk: lcd-clk-pins {
samsung,pins = "gpf0-0", "gpf0-1", "gpf0-2", "gpf0-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
lcd_data16: lcd-data-width16 {
lcd_data16: lcd-data-width16-pins {
samsung,pins = "gpf0-7", "gpf1-0", "gpf1-1", "gpf1-2",
"gpf1-3", "gpf1-6", "gpf1-7", "gpf2-0",
"gpf2-1", "gpf2-2", "gpf2-3", "gpf2-7",
@ -376,7 +376,7 @@
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
lcd_data18: lcd-data-width18 {
lcd_data18: lcd-data-width18-pins {
samsung,pins = "gpf0-6", "gpf0-7", "gpf1-0", "gpf1-1",
"gpf1-2", "gpf1-3", "gpf1-6", "gpf1-7",
"gpf2-0", "gpf2-1", "gpf2-2", "gpf2-3",
@ -387,7 +387,7 @@
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
lcd_data24: lcd-data-width24 {
lcd_data24: lcd-data-width24-pins {
samsung,pins = "gpf0-4", "gpf0-5", "gpf0-6", "gpf0-7",
"gpf1-0", "gpf1-1", "gpf1-2", "gpf1-3",
"gpf1-4", "gpf1-5", "gpf1-6", "gpf1-7",
@ -399,14 +399,14 @@
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
lcd_ldi: lcd-ldi {
lcd_ldi: lcd-ldi-pins {
samsung,pins = "gpf3-4";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
cam_port_a_io: cam-port-a-io {
cam_port_a_io: cam-port-a-io-pins {
samsung,pins = "gpj0-0", "gpj0-1", "gpj0-2", "gpj0-3",
"gpj0-4", "gpj0-5", "gpj0-6", "gpj0-7",
"gpj1-0", "gpj1-1", "gpj1-2", "gpj1-4";
@ -415,14 +415,14 @@
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
cam_port_a_clk_active: cam-port-a-clk-active {
cam_port_a_clk_active: cam-port-a-clk-active-pins {
samsung,pins = "gpj1-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
cam_port_a_clk_idle: cam-port-a-clk-idle {
cam_port_a_clk_idle: cam-port-a-clk-idle-pins {
samsung,pins = "gpj1-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
@ -431,7 +431,7 @@
};
&pinctrl_1 {
gpk0: gpk0 {
gpk0: gpk0-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@ -439,7 +439,7 @@
#interrupt-cells = <2>;
};
gpk1: gpk1 {
gpk1: gpk1-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@ -447,7 +447,7 @@
#interrupt-cells = <2>;
};
gpk2: gpk2 {
gpk2: gpk2-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@ -455,7 +455,7 @@
#interrupt-cells = <2>;
};
gpk3: gpk3 {
gpk3: gpk3-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@ -463,7 +463,7 @@
#interrupt-cells = <2>;
};
gpl0: gpl0 {
gpl0: gpl0-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@ -471,7 +471,7 @@
#interrupt-cells = <2>;
};
gpl1: gpl1 {
gpl1: gpl1-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@ -479,7 +479,7 @@
#interrupt-cells = <2>;
};
gpl2: gpl2 {
gpl2: gpl2-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@ -487,7 +487,7 @@
#interrupt-cells = <2>;
};
gpm0: gpm0 {
gpm0: gpm0-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@ -495,7 +495,7 @@
#interrupt-cells = <2>;
};
gpm1: gpm1 {
gpm1: gpm1-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@ -503,7 +503,7 @@
#interrupt-cells = <2>;
};
gpm2: gpm2 {
gpm2: gpm2-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@ -511,7 +511,7 @@
#interrupt-cells = <2>;
};
gpm3: gpm3 {
gpm3: gpm3-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@ -519,7 +519,7 @@
#interrupt-cells = <2>;
};
gpm4: gpm4 {
gpm4: gpm4-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@ -527,42 +527,42 @@
#interrupt-cells = <2>;
};
gpy0: gpy0 {
gpy0: gpy0-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
};
gpy1: gpy1 {
gpy1: gpy1-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
};
gpy2: gpy2 {
gpy2: gpy2-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
};
gpy3: gpy3 {
gpy3: gpy3-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
};
gpy4: gpy4 {
gpy4: gpy4-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
};
gpy5: gpy5 {
gpy5: gpy5-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
};
gpy6: gpy6 {
gpy6: gpy6-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
};
gpx0: gpx0 {
gpx0: gpx0-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@ -579,7 +579,7 @@
#interrupt-cells = <2>;
};
gpx1: gpx1 {
gpx1: gpx1-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@ -596,7 +596,7 @@
#interrupt-cells = <2>;
};
gpx2: gpx2 {
gpx2: gpx2-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@ -604,7 +604,7 @@
#interrupt-cells = <2>;
};
gpx3: gpx3 {
gpx3: gpx3-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@ -612,203 +612,203 @@
#interrupt-cells = <2>;
};
sd0_clk: sd0-clk {
sd0_clk: sd0-clk-pins {
samsung,pins = "gpk0-0";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
sd0_cmd: sd0-cmd {
sd0_cmd: sd0-cmd-pins {
samsung,pins = "gpk0-1";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
sd0_cd: sd0-cd {
sd0_cd: sd0-cd-pins {
samsung,pins = "gpk0-2";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
sd0_bus1: sd0-bus-width1 {
sd0_bus1: sd0-bus-width1-pins {
samsung,pins = "gpk0-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
sd0_bus4: sd0-bus-width4 {
sd0_bus4: sd0-bus-width4-pins {
samsung,pins = "gpk0-3", "gpk0-4", "gpk0-5", "gpk0-6";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
sd0_bus8: sd0-bus-width8 {
sd0_bus8: sd0-bus-width8-pins {
samsung,pins = "gpk1-3", "gpk1-4", "gpk1-5", "gpk1-6";
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
sd4_clk: sd4-clk {
sd4_clk: sd4-clk-pins {
samsung,pins = "gpk0-0";
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
sd4_cmd: sd4-cmd {
sd4_cmd: sd4-cmd-pins {
samsung,pins = "gpk0-1";
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
sd4_cd: sd4-cd {
sd4_cd: sd4-cd-pins {
samsung,pins = "gpk0-2";
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
sd4_bus1: sd4-bus-width1 {
sd4_bus1: sd4-bus-width1-pins {
samsung,pins = "gpk0-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
sd4_bus4: sd4-bus-width4 {
sd4_bus4: sd4-bus-width4-pins {
samsung,pins = "gpk0-3", "gpk0-4", "gpk0-5", "gpk0-6";
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
sd4_bus8: sd4-bus-width8 {
sd4_bus8: sd4-bus-width8-pins {
samsung,pins = "gpk1-3", "gpk1-4", "gpk1-5", "gpk1-6";
samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
sd1_clk: sd1-clk {
sd1_clk: sd1-clk-pins {
samsung,pins = "gpk1-0";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
sd1_cmd: sd1-cmd {
sd1_cmd: sd1-cmd-pins {
samsung,pins = "gpk1-1";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
sd1_cd: sd1-cd {
sd1_cd: sd1-cd-pins {
samsung,pins = "gpk1-2";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
sd1_bus1: sd1-bus-width1 {
sd1_bus1: sd1-bus-width1-pins {
samsung,pins = "gpk1-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
sd1_bus4: sd1-bus-width4 {
sd1_bus4: sd1-bus-width4-pins {
samsung,pins = "gpk1-3", "gpk1-4", "gpk1-5", "gpk1-6";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
sd2_clk: sd2-clk {
sd2_clk: sd2-clk-pins {
samsung,pins = "gpk2-0";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
sd2_cmd: sd2-cmd {
sd2_cmd: sd2-cmd-pins {
samsung,pins = "gpk2-1";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
sd2_cd: sd2-cd {
sd2_cd: sd2-cd-pins {
samsung,pins = "gpk2-2";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
sd2_bus1: sd2-bus-width1 {
sd2_bus1: sd2-bus-width1-pins {
samsung,pins = "gpk2-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
sd2_bus4: sd2-bus-width4 {
sd2_bus4: sd2-bus-width4-pins {
samsung,pins = "gpk2-3", "gpk2-4", "gpk2-5", "gpk2-6";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
sd2_bus8: sd2-bus-width8 {
sd2_bus8: sd2-bus-width8-pins {
samsung,pins = "gpk3-3", "gpk3-4", "gpk3-5", "gpk3-6";
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
sd3_clk: sd3-clk {
sd3_clk: sd3-clk-pins {
samsung,pins = "gpk3-0";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
sd3_cmd: sd3-cmd {
sd3_cmd: sd3-cmd-pins {
samsung,pins = "gpk3-1";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
sd3_cd: sd3-cd {
sd3_cd: sd3-cd-pins {
samsung,pins = "gpk3-2";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
sd3_bus1: sd3-bus-width1 {
sd3_bus1: sd3-bus-width1-pins {
samsung,pins = "gpk3-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
sd3_bus4: sd3-bus-width4 {
sd3_bus4: sd3-bus-width4-pins {
samsung,pins = "gpk3-3", "gpk3-4", "gpk3-5", "gpk3-6";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
cam_port_b_io: cam-port-b-io {
cam_port_b_io: cam-port-b-io-pins {
samsung,pins = "gpm0-0", "gpm0-1", "gpm0-2", "gpm0-3",
"gpm0-4", "gpm0-5", "gpm0-6", "gpm0-7",
"gpm1-0", "gpm1-1", "gpm2-0", "gpm2-1";
@ -817,77 +817,77 @@
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
cam_port_b_clk_active: cam-port-b-clk-active {
cam_port_b_clk_active: cam-port-b-clk-active-pins {
samsung,pins = "gpm2-2";
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
cam_port_b_clk_idle: cam-port-b-clk-idle {
cam_port_b_clk_idle: cam-port-b-clk-idle-pins {
samsung,pins = "gpm2-2";
samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
eint0: ext-int0 {
eint0: ext-int0-pins {
samsung,pins = "gpx0-0";
samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
eint8: ext-int8 {
eint8: ext-int8-pins {
samsung,pins = "gpx1-0";
samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
eint15: ext-int15 {
eint15: ext-int15-pins {
samsung,pins = "gpx1-7";
samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
eint16: ext-int16 {
eint16: ext-int16-pins {
samsung,pins = "gpx2-0";
samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
eint31: ext-int31 {
eint31: ext-int31-pins {
samsung,pins = "gpx3-7";
samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
fimc_is_i2c0: fimc-is-i2c0 {
fimc_is_i2c0: fimc-is-i2c0-pins {
samsung,pins = "gpm4-0", "gpm4-1";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
fimc_is_i2c1: fimc-is-i2c1 {
fimc_is_i2c1: fimc-is-i2c1-pins {
samsung,pins = "gpm4-2", "gpm4-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
fimc_is_uart: fimc-is-uart {
fimc_is_uart: fimc-is-uart-pins {
samsung,pins = "gpm3-5", "gpm3-7";
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
hdmi_cec: hdmi-cec {
hdmi_cec: hdmi-cec-pins {
samsung,pins = "gpx3-6";
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
@ -896,7 +896,7 @@
};
&pinctrl_2 {
gpz: gpz {
gpz: gpz-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@ -904,7 +904,7 @@
#interrupt-cells = <2>;
};
i2s0_bus: i2s0-bus {
i2s0_bus: i2s0-bus-pins {
samsung,pins = "gpz-0", "gpz-1", "gpz-2", "gpz-3",
"gpz-4", "gpz-5", "gpz-6";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
@ -912,7 +912,7 @@
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
pcm0_bus: pcm0-bus {
pcm0_bus: pcm0-bus-pins {
samsung,pins = "gpz-0", "gpz-1", "gpz-2", "gpz-3",
"gpz-4";
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
@ -922,7 +922,7 @@
};
&pinctrl_3 {
gpv0: gpv0 {
gpv0: gpv0-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@ -930,7 +930,7 @@
#interrupt-cells = <2>;
};
gpv1: gpv1 {
gpv1: gpv1-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@ -938,7 +938,7 @@
#interrupt-cells = <2>;
};
gpv2: gpv2 {
gpv2: gpv2-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@ -946,7 +946,7 @@
#interrupt-cells = <2>;
};
gpv3: gpv3 {
gpv3: gpv3-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@ -954,7 +954,7 @@
#interrupt-cells = <2>;
};
gpv4: gpv4 {
gpv4: gpv4-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@ -962,7 +962,7 @@
#interrupt-cells = <2>;
};
c2c_bus: c2c-bus {
c2c_bus: c2c-bus-pins {
samsung,pins = "gpv0-0", "gpv0-1", "gpv0-2", "gpv0-3",
"gpv0-4", "gpv0-5", "gpv0-6", "gpv0-7",
"gpv1-0", "gpv1-1", "gpv1-2", "gpv1-3",

4
arch/arm/boot/dts/exynos4412-smdk4412.dts
View File

@ -133,14 +133,14 @@
};
&pinctrl_1 {
keypad_rows: keypad-rows {
keypad_rows: keypad-rows-pins {
samsung,pins = "gpx2-0", "gpx2-1", "gpx2-2";
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
keypad_cols: keypad-cols {
keypad_cols: keypad-cols-pins {
samsung,pins = "gpx1-0", "gpx1-1", "gpx1-2", "gpx1-3",
"gpx1-4", "gpx1-5", "gpx1-6", "gpx1-7";
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;

2
arch/arm/boot/dts/exynos4412.dtsi
View File

@ -813,7 +813,7 @@
interrupt-parent = <&combiner>;
interrupts = <2 4>;
reg = <0x100C0000 0x100>;
clocks = <&clock 383>;
clocks = <&clock CLK_TMU_APBIF>;
clock-names = "tmu_apbif";
status = "disabled";
};

7
arch/arm/boot/dts/exynos5250-arndale.dts
View File

@ -590,7 +590,7 @@
};
&pinctrl_0 {
s5m8767_irq: s5m8767-irq {
s5m8767_irq: s5m8767-irq-pins {
samsung,pins = "gpx3-2";
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
};
@ -632,3 +632,8 @@
#size-cells = <0>;
};
};
&usbdrd {
vdd10-supply = <&ldo15_reg>;
vdd33-supply = <&ldo12_reg>;
};

222
arch/arm/boot/dts/exynos5250-pinctrl.dtsi
View File

@ -12,7 +12,7 @@
#include <dt-bindings/pinctrl/samsung.h>
&pinctrl_0 {
gpa0: gpa0 {
gpa0: gpa0-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@ -20,7 +20,7 @@
#interrupt-cells = <2>;
};
gpa1: gpa1 {
gpa1: gpa1-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@ -28,7 +28,7 @@
#interrupt-cells = <2>;
};
gpa2: gpa2 {
gpa2: gpa2-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@ -36,7 +36,7 @@
#interrupt-cells = <2>;
};
gpb0: gpb0 {
gpb0: gpb0-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@ -44,7 +44,7 @@
#interrupt-cells = <2>;
};
gpb1: gpb1 {
gpb1: gpb1-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@ -52,7 +52,7 @@
#interrupt-cells = <2>;
};
gpb2: gpb2 {
gpb2: gpb2-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@ -60,7 +60,7 @@
#interrupt-cells = <2>;
};
gpb3: gpb3 {
gpb3: gpb3-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@ -68,7 +68,7 @@
#interrupt-cells = <2>;
};
gpc0: gpc0 {
gpc0: gpc0-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@ -76,7 +76,7 @@
#interrupt-cells = <2>;
};
gpc1: gpc1 {
gpc1: gpc1-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@ -84,7 +84,7 @@
#interrupt-cells = <2>;
};
gpc2: gpc2 {
gpc2: gpc2-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@ -92,7 +92,7 @@
#interrupt-cells = <2>;
};
gpc3: gpc3 {
gpc3: gpc3-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@ -100,7 +100,7 @@
#interrupt-cells = <2>;
};
gpd0: gpd0 {
gpd0: gpd0-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@ -108,7 +108,7 @@
#interrupt-cells = <2>;
};
gpd1: gpd1 {
gpd1: gpd1-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@ -116,42 +116,42 @@
#interrupt-cells = <2>;
};
gpy0: gpy0 {
gpy0: gpy0-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
};
gpy1: gpy1 {
gpy1: gpy1-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
};
gpy2: gpy2 {
gpy2: gpy2-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
};
gpy3: gpy3 {
gpy3: gpy3-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
};
gpy4: gpy4 {
gpy4: gpy4-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
};
gpy5: gpy5 {
gpy5: gpy5-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
};
gpy6: gpy6 {
gpy6: gpy6-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
};
gpc4: gpc4 {
gpc4: gpc4-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@ -159,7 +159,7 @@
#interrupt-cells = <2>;
};
gpx0: gpx0 {
gpx0: gpx0-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@ -170,7 +170,7 @@
<26 0>, <26 1>, <27 0>, <27 1>;
};
gpx1: gpx1 {
gpx1: gpx1-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@ -181,7 +181,7 @@
<30 0>, <30 1>, <31 0>, <31 1>;
};
gpx2: gpx2 {
gpx2: gpx2-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@ -189,7 +189,7 @@
#interrupt-cells = <2>;
};
gpx3: gpx3 {
gpx3: gpx3-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@ -197,104 +197,104 @@
#interrupt-cells = <2>;
};
uart0_data: uart0-data {
uart0_data: uart0-data-pins {
samsung,pins = "gpa0-0", "gpa0-1";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
uart0_fctl: uart0-fctl {
uart0_fctl: uart0-fctl-pins {
samsung,pins = "gpa0-2", "gpa0-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
i2c2_bus: i2c2-bus {
i2c2_bus: i2c2-bus-pins {
samsung,pins = "gpa0-6", "gpa0-7";
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
i2c2_hs_bus: i2c2-hs-bus {
i2c2_hs_bus: i2c2-hs-bus-pins {
samsung,pins = "gpa0-6", "gpa0-7";
samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
i2c2_gpio_bus: i2c2-gpio-bus {
i2c2_gpio_bus: i2c2-gpio-bus-pins {
samsung,pins = "gpa0-6", "gpa0-7";
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
uart2_data: uart2-data {
uart2_data: uart2-data-pins {
samsung,pins = "gpa1-0", "gpa1-1";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
uart2_fctl: uart2-fctl {
uart2_fctl: uart2-fctl-pins {
samsung,pins = "gpa1-2", "gpa1-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
i2c3_bus: i2c3-bus {
i2c3_bus: i2c3-bus-pins {
samsung,pins = "gpa1-2", "gpa1-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
i2c3_hs_bus: i2c3-hs-bus {
i2c3_hs_bus: i2c3-hs-bus-pins {
samsung,pins = "gpa1-2", "gpa1-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
uart3_data: uart3-data {
samsung,pins = "gpa1-4", "gpa1-4";
uart3_data: uart3-data-pins {
samsung,pins = "gpa1-4", "gpa1-5";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
spi0_bus: spi0-bus {
spi0_bus: spi0-bus-pins {
samsung,pins = "gpa2-0", "gpa2-2", "gpa2-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
i2c4_bus: i2c4-bus {
i2c4_bus: i2c4-bus-pins {
samsung,pins = "gpa2-0", "gpa2-1";
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
i2c5_bus: i2c5-bus {
i2c5_bus: i2c5-bus-pins {
samsung,pins = "gpa2-2", "gpa2-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
spi1_bus: spi1-bus {
spi1_bus: spi1-bus-pins {
samsung,pins = "gpa2-4", "gpa2-6", "gpa2-7";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
i2s1_bus: i2s1-bus {
i2s1_bus: i2s1-bus-pins {
samsung,pins = "gpb0-0", "gpb0-1", "gpb0-2", "gpb0-3",
"gpb0-4";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
@ -302,7 +302,7 @@
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
pcm1_bus: pcm1-bus {
pcm1_bus: pcm1-bus-pins {
samsung,pins = "gpb0-0", "gpb0-1", "gpb0-2", "gpb0-3",
"gpb0-4";
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
@ -310,7 +310,7 @@
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
ac97_bus: ac97-bus {
ac97_bus: ac97-bus-pins {
samsung,pins = "gpb0-0", "gpb0-1", "gpb0-2", "gpb0-3",
"gpb0-4";
samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
@ -318,7 +318,7 @@
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
i2s2_bus: i2s2-bus {
i2s2_bus: i2s2-bus-pins {
samsung,pins = "gpb1-0", "gpb1-1", "gpb1-2", "gpb1-3",
"gpb1-4";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
@ -326,7 +326,7 @@
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
pcm2_bus: pcm2-bus {
pcm2_bus: pcm2-bus-pins {
samsung,pins = "gpb1-0", "gpb1-1", "gpb1-2", "gpb1-3",
"gpb1-4";
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
@ -334,280 +334,280 @@
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
spdif_bus: spdif-bus {
spdif_bus: spdif-bus-pins {
samsung,pins = "gpb1-0", "gpb1-1";
samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
spi2_bus: spi2-bus {
spi2_bus: spi2-bus-pins {
samsung,pins = "gpb1-1", "gpb1-3", "gpb1-4";
samsung,pin-function = <EXYNOS_PIN_FUNC_5>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
i2c6_bus: i2c6-bus {
i2c6_bus: i2c6-bus-pins {
samsung,pins = "gpb1-3", "gpb1-4";
samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
pwm0_out: pwm0-out {
pwm0_out: pwm0-out-pins {
samsung,pins = "gpb2-0";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
pwm1_out: pwm1-out {
pwm1_out: pwm1-out-pins {
samsung,pins = "gpb2-1";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
pwm2_out: pwm2-out {
pwm2_out: pwm2-out-pins {
samsung,pins = "gpb2-2";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
pwm3_out: pwm3-out {
pwm3_out: pwm3-out-pins {
samsung,pins = "gpb2-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
i2c7_bus: i2c7-bus {
i2c7_bus: i2c7-bus-pins {
samsung,pins = "gpb2-2", "gpb2-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
i2c0_bus: i2c0-bus {
i2c0_bus: i2c0-bus-pins {
samsung,pins = "gpb3-0", "gpb3-1";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
i2c1_bus: i2c1-bus {
i2c1_bus: i2c1-bus-pins {
samsung,pins = "gpb3-2", "gpb3-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
i2c0_hs_bus: i2c0-hs-bus {
i2c0_hs_bus: i2c0-hs-bus-pins {
samsung,pins = "gpb3-0", "gpb3-1";
samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
i2c1_hs_bus: i2c1-hs-bus {
i2c1_hs_bus: i2c1-hs-bus-pins {
samsung,pins = "gpb3-2", "gpb3-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
sd0_clk: sd0-clk {
sd0_clk: sd0-clk-pins {
samsung,pins = "gpc0-0";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
sd0_cmd: sd0-cmd {
sd0_cmd: sd0-cmd-pins {
samsung,pins = "gpc0-1";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
sd0_cd: sd0-cd {
sd0_cd: sd0-cd-pins {
samsung,pins = "gpc0-2";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
sd0_bus1: sd0-bus-width1 {
sd0_bus1: sd0-bus-width1-pins {
samsung,pins = "gpc0-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
sd0_bus4: sd0-bus-width4 {
sd0_bus4: sd0-bus-width4-pins {
samsung,pins = "gpc0-3", "gpc0-4", "gpc0-5", "gpc0-6";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
sd0_bus8: sd0-bus-width8 {
sd0_bus8: sd0-bus-width8-pins {
samsung,pins = "gpc1-0", "gpc1-1", "gpc1-2", "gpc1-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
sd1_clk: sd1-clk {
sd1_clk: sd1-clk-pins {
samsung,pins = "gpc2-0";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
sd1_cmd: sd1-cmd {
sd1_cmd: sd1-cmd-pins {
samsung,pins = "gpc2-1";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
sd1_cd: sd1-cd {
sd1_cd: sd1-cd-pins {
samsung,pins = "gpc2-2";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
sd1_bus1: sd1-bus-width1 {
sd1_bus1: sd1-bus-width1-pins {
samsung,pins = "gpc2-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
sd1_bus4: sd1-bus-width4 {
sd1_bus4: sd1-bus-width4-pins {
samsung,pins = "gpc2-3", "gpc2-4", "gpc2-5", "gpc2-6";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
sd2_clk: sd2-clk {
sd2_clk: sd2-clk-pins {
samsung,pins = "gpc3-0";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
sd2_cmd: sd2-cmd {
sd2_cmd: sd2-cmd-pins {
samsung,pins = "gpc3-1";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
sd2_cd: sd2-cd {
sd2_cd: sd2-cd-pins {
samsung,pins = "gpc3-2";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
sd2_bus1: sd2-bus-width1 {
sd2_bus1: sd2-bus-width1-pins {
samsung,pins = "gpc3-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
sd2_bus4: sd2-bus-width4 {
sd2_bus4: sd2-bus-width4-pins {
samsung,pins = "gpc3-3", "gpc3-4", "gpc3-5", "gpc3-6";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
sd2_bus8: sd2-bus-width8 {
sd2_bus8: sd2-bus-width8-pins {
samsung,pins = "gpc4-3", "gpc4-4", "gpc4-5", "gpc4-6";
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
sd3_clk: sd3-clk {
sd3_clk: sd3-clk-pins {
samsung,pins = "gpc4-0";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
sd3_cmd: sd3-cmd {
sd3_cmd: sd3-cmd-pins {
samsung,pins = "gpc4-1";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
sd3_cd: sd3-cd {
sd3_cd: sd3-cd-pins {
samsung,pins = "gpc4-2";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
sd3_bus1: sd3-bus-width1 {
sd3_bus1: sd3-bus-width1-pins {
samsung,pins = "gpc4-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
sd3_bus4: sd3-bus-width4 {
sd3_bus4: sd3-bus-width4-pins {
samsung,pins = "gpc4-3", "gpc4-4", "gpc4-5", "gpc4-6";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
uart1_data: uart1-data {
uart1_data: uart1-data-pins {
samsung,pins = "gpd0-0", "gpd0-1";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
uart1_fctl: uart1-fctl {
uart1_fctl: uart1-fctl-pins {
samsung,pins = "gpd0-2", "gpd0-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
dp_hpd: dp_hpd {
dp_hpd: dp-hpd-pins {
samsung,pins = "gpx0-7";
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
hdmi_cec: hdmi-cec {
hdmi_cec: hdmi-cec-pins {
samsung,pins = "gpx3-6";
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
hdmi_hpd: hdmi-hpd {
hdmi_hpd: hdmi-hpd-pins {
samsung,pins = "gpx3-7";
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
};
};
&pinctrl_1 {
gpe0: gpe0 {
gpe0: gpe0-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@ -615,7 +615,7 @@
#interrupt-cells = <2>;
};
gpe1: gpe1 {
gpe1: gpe1-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@ -623,7 +623,7 @@
#interrupt-cells = <2>;
};
gpf0: gpf0 {
gpf0: gpf0-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@ -631,7 +631,7 @@
#interrupt-cells = <2>;
};
gpf1: gpf1 {
gpf1: gpf1-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@ -639,7 +639,7 @@
#interrupt-cells = <2>;
};
gpg0: gpg0 {
gpg0: gpg0-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@ -647,7 +647,7 @@
#interrupt-cells = <2>;
};
gpg1: gpg1 {
gpg1: gpg1-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@ -655,7 +655,7 @@
#interrupt-cells = <2>;
};
gpg2: gpg2 {
gpg2: gpg2-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@ -663,7 +663,7 @@
#interrupt-cells = <2>;
};
gph0: gph0 {
gph0: gph0-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@ -671,7 +671,7 @@
#interrupt-cells = <2>;
};
gph1: gph1 {
gph1: gph1-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@ -679,7 +679,7 @@
#interrupt-cells = <2>;
};
cam_gpio_a: cam-gpio-a {
cam_gpio_a: cam-gpio-a-pins {
samsung,pins = "gpe0-0", "gpe0-1", "gpe0-2", "gpe0-3",
"gpe0-4", "gpe0-5", "gpe0-6", "gpe0-7",
"gpe1-0", "gpe1-1";
@ -688,7 +688,7 @@
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
cam_gpio_b: cam-gpio-b {
cam_gpio_b: cam-gpio-b-pins {
samsung,pins = "gpf0-0", "gpf0-1", "gpf0-2", "gpf0-3",
"gpf1-0", "gpf1-1", "gpf1-2", "gpf1-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
@ -696,42 +696,42 @@
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
cam_i2c2_bus: cam-i2c2-bus {
cam_i2c2_bus: cam-i2c2-bus-pins {
samsung,pins = "gpe0-6", "gpe1-0";
samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
cam_spi1_bus: cam-spi1-bus {
cam_spi1_bus: cam-spi1-bus-pins {
samsung,pins = "gpe0-4", "gpe0-5", "gpf0-2", "gpf0-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
cam_i2c1_bus: cam-i2c1-bus {
cam_i2c1_bus: cam-i2c1-bus-pins {
samsung,pins = "gpf0-2", "gpf0-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
cam_i2c0_bus: cam-i2c0-bus {
cam_i2c0_bus: cam-i2c0-bus-pins {
samsung,pins = "gpf0-0", "gpf0-1";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
cam_spi0_bus: cam-spi0-bus {
cam_spi0_bus: cam-spi0-bus-pins {
samsung,pins = "gpf1-0", "gpf1-1", "gpf1-2", "gpf1-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
cam_bayrgb_bus: cam-bayrgb-bus {
cam_bayrgb_bus: cam-bayrgb-bus-pins {
samsung,pins = "gpg0-0", "gpg0-1", "gpg0-2", "gpg0-3",
"gpg0-4", "gpg0-5", "gpg0-6", "gpg0-7",
"gpg1-0", "gpg1-1", "gpg1-2", "gpg1-3",
@ -742,7 +742,7 @@
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
cam_port_a: cam-port-a {
cam_port_a: cam-port-a-pins {
samsung,pins = "gph0-0", "gph0-1", "gph0-2", "gph0-3",
"gph1-0", "gph1-1", "gph1-2", "gph1-3",
"gph1-4", "gph1-5", "gph1-6", "gph1-7";
@ -753,7 +753,7 @@
};
&pinctrl_2 {
gpv0: gpv0 {
gpv0: gpv0-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@ -761,7 +761,7 @@
#interrupt-cells = <2>;
};
gpv1: gpv1 {
gpv1: gpv1-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@ -769,7 +769,7 @@
#interrupt-cells = <2>;
};
gpv2: gpv2 {
gpv2: gpv2-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@ -777,7 +777,7 @@
#interrupt-cells = <2>;
};
gpv3: gpv3 {
gpv3: gpv3-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@ -785,7 +785,7 @@
#interrupt-cells = <2>;
};
gpv4: gpv4 {
gpv4: gpv4-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@ -793,7 +793,7 @@
#interrupt-cells = <2>;
};
c2c_rxd: c2c-rxd {
c2c_rxd: c2c-rxd-pins {
samsung,pins = "gpv0-0", "gpv0-1", "gpv0-2", "gpv0-3",
"gpv0-4", "gpv0-5", "gpv0-6", "gpv0-7",
"gpv1-0", "gpv1-1", "gpv1-2", "gpv1-3",
@ -803,7 +803,7 @@
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
c2c_txd: c2c-txd {
c2c_txd: c2c-txd-pins {
samsung,pins = "gpv2-0", "gpv2-1", "gpv2-2", "gpv2-3",
"gpv2-4", "gpv2-5", "gpv2-6", "gpv2-7",
"gpv3-0", "gpv3-1", "gpv3-2", "gpv3-3",
@ -815,7 +815,7 @@
};
&pinctrl_3 {
gpz: gpz {
gpz: gpz-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@ -823,7 +823,7 @@
#interrupt-cells = <2>;
};
i2s0_bus: i2s0-bus {
i2s0_bus: i2s0-bus-pins {
samsung,pins = "gpz-0", "gpz-1", "gpz-2", "gpz-3",
"gpz-4", "gpz-5", "gpz-6";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;

10
arch/arm/boot/dts/exynos5250-smdk5250.dts
View File

@ -118,6 +118,9 @@
status = "okay";
ddc = <&i2c_2>;
hpd-gpios = <&gpx3 7 GPIO_ACTIVE_HIGH>;
vdd-supply = <&ldo8_reg>;
vdd_osc-supply = <&ldo10_reg>;
vdd_pll-supply = <&ldo8_reg>;
};
&i2c_0 {
@ -410,10 +413,15 @@
};
&pinctrl_0 {
max77686_irq: max77686-irq {
max77686_irq: max77686-irq-pins {
samsung,pins = "gpx3-2";
samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
};
&usbdrd {
vdd10-supply = <&ldo15_reg>;
vdd33-supply = <&ldo12_reg>;
};

27
arch/arm/boot/dts/exynos5250-snow-common.dtsi
View File

@ -587,63 +587,63 @@
};
&pinctrl_0 {
wifi_en: wifi-en {
wifi_en: wifi-en-pins {
samsung,pins = "gpx0-1";
samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
wifi_rst: wifi-rst {
wifi_rst: wifi-rst-pins {
samsung,pins = "gpx0-2";
samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
power_key_irq: power-key-irq {
power_key_irq: power-key-irq-pins {
samsung,pins = "gpx1-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
ec_irq: ec-irq {
ec_irq: ec-irq-pins {
samsung,pins = "gpx1-6";
samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
tps65090_irq: tps65090-irq {
tps65090_irq: tps65090-irq-pins {
samsung,pins = "gpx2-6";
samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
usb3_vbus_en: usb3-vbus-en {
usb3_vbus_en: usb3-vbus-en-pins {
samsung,pins = "gpx2-7";
samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
max77686_irq: max77686-irq {
max77686_irq: max77686-irq-pins {
samsung,pins = "gpx3-2";
samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
lid_irq: lid-irq {
lid_irq: lid-irq-pins {
samsung,pins = "gpx3-5";
samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
hdmi_hpd_irq: hdmi-hpd-irq {
hdmi_hpd_irq: hdmi-hpd-irq-pins {
samsung,pins = "gpx3-7";
samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
@ -652,14 +652,14 @@
};
&pinctrl_1 {
arb_their_claim: arb-their-claim {
arb_their_claim: arb-their-claim-pins {
samsung,pins = "gpe0-4";
samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
arb_our_claim: arb-our-claim {
arb_our_claim: arb-our-claim-pins {
samsung,pins = "gpf0-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
@ -698,6 +698,11 @@
cs-gpios = <&gpa2 5 GPIO_ACTIVE_HIGH>;
};
&usbdrd {
vdd10-supply = <&ldo15_reg>;
vdd33-supply = <&ldo12_reg>;
};
&usbdrd_dwc3 {
dr_mode = "host";
};

2
arch/arm/boot/dts/exynos5250-snow-rev5.dts
View File

@ -47,7 +47,7 @@
};
&pinctrl_0 {
max98090_irq: max98090-irq {
max98090_irq: max98090-irq-pins {
samsung,pins = "gpx0-4";
samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;

2
arch/arm/boot/dts/exynos5250-snow.dts
View File

@ -43,7 +43,7 @@
};
&pinctrl_0 {
max98095_en: max98095-en {
max98095_en: max98095-en-pins {
samsung,pins = "gpx1-7";
samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;

25
arch/arm/boot/dts/exynos5250-spring.dts
View File

@ -451,63 +451,63 @@
};
&pinctrl_0 {
s5m8767_dvs: s5m8767-dvs {
s5m8767_dvs: s5m8767-dvs-pins {
samsung,pins = "gpd1-0", "gpd1-1", "gpd1-2";
samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
dp_hpd_gpio: dp-hpd {
dp_hpd_gpio: dp-hpd-pins {
samsung,pins = "gpc3-0";
samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
trackpad_irq: trackpad-irq {
trackpad_irq: trackpad-irq-pins {
samsung,pins = "gpx1-2";
samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
power_key_irq: power-key-irq {
power_key_irq: power-key-irq-pins {
samsung,pins = "gpx1-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
ec_irq: ec-irq {
ec_irq: ec-irq-pins {
samsung,pins = "gpx1-6";
samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
s5m8767_ds: s5m8767-ds {
s5m8767_ds: s5m8767-ds-pins {
samsung,pins = "gpx2-3", "gpx2-4", "gpx2-5";
samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
s5m8767_irq: s5m8767-irq {
s5m8767_irq: s5m8767-irq-pins {
samsung,pins = "gpx3-2";
samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
lid_irq: lid-irq {
lid_irq: lid-irq-pins {
samsung,pins = "gpx3-5";
samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
hdmi_hpd_irq: hdmi-hpd-irq {
hdmi_hpd_irq: hdmi-hpd-irq-pins {
samsung,pins = "gpx3-7";
samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
@ -516,7 +516,7 @@
};
&pinctrl_1 {
hsic_reset: hsic-reset {
hsic_reset: hsic-reset-pins {
samsung,pins = "gpe1-0";
samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
@ -553,4 +553,9 @@
num-cs = <1>;
};
&usbdrd {
vdd10-supply = <&ldo15_reg>;
vdd33-supply = <&ldo12_reg>;
};
#include "cros-ec-keyboard.dtsi"

19
arch/arm/boot/dts/exynos5250.dtsi
View File

@ -496,8 +496,7 @@
status = "disabled";
reg = <0x12d20000 0x100>;
interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&pdma0 5
&pdma0 4>;
dmas = <&pdma0 5>, <&pdma0 4>;
dma-names = "tx", "rx";
#address-cells = <1>;
#size-cells = <0>;
@ -512,8 +511,7 @@
status = "disabled";
reg = <0x12d30000 0x100>;
interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&pdma1 5
&pdma1 4>;
dmas = <&pdma1 5>, <&pdma1 4>;
dma-names = "tx", "rx";
#address-cells = <1>;
#size-cells = <0>;
@ -528,8 +526,7 @@
status = "disabled";
reg = <0x12d40000 0x100>;
interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&pdma0 7
&pdma0 6>;
dmas = <&pdma0 7>, <&pdma0 6>;
dma-names = "tx", "rx";
#address-cells = <1>;
#size-cells = <0>;
@ -637,7 +634,7 @@
#sound-dai-cells = <1>;
};
usb_dwc3 {
usbdrd: usb3 {
compatible = "samsung,exynos5250-dwusb3";
clocks = <&clock CLK_USB3>;
clock-names = "usbdrd30";
@ -695,7 +692,7 @@
samsung,pmureg-phandle = <&pmu_system_controller>;
};
pdma0: pdma@121a0000 {
pdma0: dma-controller@121a0000 {
compatible = "arm,pl330", "arm,primecell";
reg = <0x121A0000 0x1000>;
interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
@ -706,7 +703,7 @@
#dma-requests = <32>;
};
pdma1: pdma@121b0000 {
pdma1: dma-controller@121b0000 {
compatible = "arm,pl330", "arm,primecell";
reg = <0x121B0000 0x1000>;
interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
@ -717,7 +714,7 @@
#dma-requests = <32>;
};
mdma0: mdma@10800000 {
mdma0: dma-controller@10800000 {
compatible = "arm,pl330", "arm,primecell";
reg = <0x10800000 0x1000>;
interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
@ -728,7 +725,7 @@
#dma-requests = <1>;
};
mdma1: mdma@11c10000 {
mdma1: dma-controller@11c10000 {
compatible = "arm,pl330", "arm,primecell";
reg = <0x11C10000 0x1000>;
interrupts = <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>;

148
arch/arm/boot/dts/exynos5260-pinctrl.dtsi
View File

@ -12,7 +12,7 @@
#include <dt-bindings/pinctrl/samsung.h>
&pinctrl_0 {
gpa0: gpa0 {
gpa0: gpa0-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@ -20,7 +20,7 @@
#interrupt-cells = <2>;
};
gpa1: gpa1 {
gpa1: gpa1-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@ -28,7 +28,7 @@
#interrupt-cells = <2>;
};
gpa2: gpa2 {
gpa2: gpa2-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@ -36,7 +36,7 @@
#interrupt-cells = <2>;
};
gpb0: gpb0 {
gpb0: gpb0-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@ -44,7 +44,7 @@
#interrupt-cells = <2>;
};
gpb1: gpb1 {
gpb1: gpb1-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@ -52,7 +52,7 @@
#interrupt-cells = <2>;
};
gpb2: gpb2 {
gpb2: gpb2-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@ -60,7 +60,7 @@
#interrupt-cells = <2>;
};
gpb3: gpb3 {
gpb3: gpb3-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@ -68,7 +68,7 @@
#interrupt-cells = <2>;
};
gpb4: gpb4 {
gpb4: gpb4-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@ -76,7 +76,7 @@
#interrupt-cells = <2>;
};
gpb5: gpb5 {
gpb5: gpb5-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@ -84,7 +84,7 @@
#interrupt-cells = <2>;
};
gpd0: gpd0 {
gpd0: gpd0-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@ -92,7 +92,7 @@
#interrupt-cells = <2>;
};
gpd1: gpd1 {
gpd1: gpd1-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@ -100,7 +100,7 @@
#interrupt-cells = <2>;
};
gpd2: gpd2 {
gpd2: gpd2-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@ -108,7 +108,7 @@
#interrupt-cells = <2>;
};
gpe0: gpe0 {
gpe0: gpe0-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@ -116,7 +116,7 @@
#interrupt-cells = <2>;
};
gpe1: gpe1 {
gpe1: gpe1-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@ -124,7 +124,7 @@
#interrupt-cells = <2>;
};
gpf0: gpf0 {
gpf0: gpf0-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@ -132,7 +132,7 @@
#interrupt-cells = <2>;
};
gpf1: gpf1 {
gpf1: gpf1-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@ -140,7 +140,7 @@
#interrupt-cells = <2>;
};
gpk0: gpk0 {
gpk0: gpk0-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@ -148,7 +148,7 @@
#interrupt-cells = <2>;
};
gpx0: gpx0 {
gpx0: gpx0-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@ -164,7 +164,7 @@
#interrupt-cells = <2>;
};
gpx1: gpx1 {
gpx1: gpx1-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@ -180,7 +180,7 @@
#interrupt-cells = <2>;
};
gpx2: gpx2 {
gpx2: gpx2-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@ -188,7 +188,7 @@
#interrupt-cells = <2>;
};
gpx3: gpx3 {
gpx3: gpx3-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@ -196,63 +196,63 @@
#interrupt-cells = <2>;
};
uart0_data: uart0-data {
uart0_data: uart0-data-pins {
samsung,pins = "gpa0-0", "gpa0-1";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
};
uart0_fctl: uart0-fctl {
uart0_fctl: uart0-fctl-pins {
samsung,pins = "gpa0-2", "gpa0-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
};
uart1_data: uart1-data {
uart1_data: uart1-data-pins {
samsung,pins = "gpa1-0", "gpa1-1";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
};
uart1_fctl: uart1-fctl {
uart1_fctl: uart1-fctl-pins {
samsung,pins = "gpa1-2", "gpa1-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
};
uart2_data: uart2-data {
uart2_data: uart2-data-pins {
samsung,pins = "gpa1-4", "gpa1-5";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
};
spi0_bus: spi0-bus {
spi0_bus: spi0-bus-pins {
samsung,pins = "gpa2-0", "gpa2-2", "gpa2-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
};
spi1_bus: spi1-bus {
spi1_bus: spi1-bus-pins {
samsung,pins = "gpa2-4", "gpa2-6", "gpa2-7";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
};
usb3_vbus0_en: usb3-vbus0-en {
usb3_vbus0_en: usb3-vbus0-en-pins {
samsung,pins = "gpa2-4";
samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
};
i2s1_bus: i2s1-bus {
i2s1_bus: i2s1-bus-pins {
samsung,pins = "gpb0-0", "gpb0-1", "gpb0-2", "gpb0-3",
"gpb0-4";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
@ -260,7 +260,7 @@
samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
};
pcm1_bus: pcm1-bus {
pcm1_bus: pcm1-bus-pins {
samsung,pins = "gpb0-0", "gpb0-1", "gpb0-2", "gpb0-3",
"gpb0-4";
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
@ -268,105 +268,105 @@
samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
};
spdif1_bus: spdif1-bus {
spdif1_bus: spdif1-bus-pins {
samsung,pins = "gpb0-0", "gpb0-1", "gpb0-2";
samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
};
spi2_bus: spi2-bus {
spi2_bus: spi2-bus-pins {
samsung,pins = "gpb1-0", "gpb1-2", "gpb1-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
};
i2c0_hs_bus: i2c0-hs-bus {
i2c0_hs_bus: i2c0-hs-bus-pins {
samsung,pins = "gpb3-0", "gpb3-1";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
};
i2c1_hs_bus: i2c1-hs-bus {
i2c1_hs_bus: i2c1-hs-bus-pins {
samsung,pins = "gpb3-2", "gpb3-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
};
i2c2_hs_bus: i2c2-hs-bus {
i2c2_hs_bus: i2c2-hs-bus-pins {
samsung,pins = "gpb3-4", "gpb3-5";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
};
i2c3_hs_bus: i2c3-hs-bus {
i2c3_hs_bus: i2c3-hs-bus-pins {
samsung,pins = "gpb3-6", "gpb3-7";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
};
i2c4_bus: i2c4-bus {
i2c4_bus: i2c4-bus-pins {
samsung,pins = "gpb4-0", "gpb4-1";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
};
i2c5_bus: i2c5-bus {
i2c5_bus: i2c5-bus-pins {
samsung,pins = "gpb4-2", "gpb4-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
};
i2c6_bus: i2c6-bus {
i2c6_bus: i2c6-bus-pins {
samsung,pins = "gpb4-4", "gpb4-5";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
};
i2c7_bus: i2c7-bus {
i2c7_bus: i2c7-bus-pins {
samsung,pins = "gpb4-6", "gpb4-7";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
};
i2c8_bus: i2c8-bus {
i2c8_bus: i2c8-bus-pins {
samsung,pins = "gpb5-0", "gpb5-1";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
};
i2c9_bus: i2c9-bus {
i2c9_bus: i2c9-bus-pins {
samsung,pins = "gpb5-2", "gpb5-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
};
i2c10_bus: i2c10-bus {
i2c10_bus: i2c10-bus-pins {
samsung,pins = "gpb5-4", "gpb5-5";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
};
i2c11_bus: i2c11-bus {
i2c11_bus: i2c11-bus-pins {
samsung,pins = "gpb5-6", "gpb5-7";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
};
cam_gpio_a: cam-gpio-a {
cam_gpio_a: cam-gpio-a-pins {
samsung,pins = "gpe0-0", "gpe0-1", "gpe0-2", "gpe0-3",
"gpe0-4", "gpe0-5", "gpe0-6", "gpe0-7",
"gpe1-0", "gpe1-1";
@ -375,7 +375,7 @@
samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
};
cam_gpio_b: cam-gpio-b {
cam_gpio_b: cam-gpio-b-pins {
samsung,pins = "gpf0-0", "gpf0-1", "gpf0-2", "gpf0-3",
"gpf1-0", "gpf1-1", "gpf1-2", "gpf1-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
@ -383,28 +383,28 @@
samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
};
cam_i2c1_bus: cam-i2c1-bus {
cam_i2c1_bus: cam-i2c1-bus-pins {
samsung,pins = "gpf0-2", "gpf0-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
};
cam_i2c0_bus: cam-i2c0-bus {
cam_i2c0_bus: cam-i2c0-bus-pins {
samsung,pins = "gpf0-0", "gpf0-1";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
};
cam_spi0_bus: cam-spi0-bus {
cam_spi0_bus: cam-spi0-bus-pins {
samsung,pins = "gpf1-0", "gpf1-1", "gpf1-2", "gpf1-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
};
cam_spi1_bus: cam-spi1-bus {
cam_spi1_bus: cam-spi1-bus-pins {
samsung,pins = "gpf1-4", "gpf1-5", "gpf1-6", "gpf1-7";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
@ -413,7 +413,7 @@
};
&pinctrl_1 {
gpc0: gpc0 {
gpc0: gpc0-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@ -421,7 +421,7 @@
#interrupt-cells = <2>;
};
gpc1: gpc1 {
gpc1: gpc1-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@ -429,7 +429,7 @@
#interrupt-cells = <2>;
};
gpc2: gpc2 {
gpc2: gpc2-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@ -437,7 +437,7 @@
#interrupt-cells = <2>;
};
gpc3: gpc3 {
gpc3: gpc3-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@ -445,7 +445,7 @@
#interrupt-cells = <2>;
};
gpc4: gpc4 {
gpc4: gpc4-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@ -453,112 +453,112 @@
#interrupt-cells = <2>;
};
sd0_clk: sd0-clk {
sd0_clk: sd0-clk-pins {
samsung,pins = "gpc0-0";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV6>;
};
sd0_cmd: sd0-cmd {
sd0_cmd: sd0-cmd-pins {
samsung,pins = "gpc0-1";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV6>;
};
sd0_bus1: sd0-bus-width1 {
sd0_bus1: sd0-bus-width1-pins {
samsung,pins = "gpc0-2";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV6>;
};
sd0_bus4: sd0-bus-width4 {
sd0_bus4: sd0-bus-width4-pins {
samsung,pins = "gpc0-3", "gpc0-4", "gpc0-5";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV6>;
};
sd0_bus8: sd0-bus-width8 {
sd0_bus8: sd0-bus-width8-pins {
samsung,pins = "gpc3-0", "gpc3-1", "gpc3-2", "gpc3-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV6>;
};
sd0_rdqs: sd0-rdqs {
sd0_rdqs: sd0-rdqs-pins {
samsung,pins = "gpc0-6";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV6>;
};
sd1_clk: sd1-clk {
sd1_clk: sd1-clk-pins {
samsung,pins = "gpc1-0";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV6>;
};
sd1_cmd: sd1-cmd {
sd1_cmd: sd1-cmd-pins {
samsung,pins = "gpc1-1";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV6>;
};
sd1_bus1: sd1-bus-width1 {
sd1_bus1: sd1-bus-width1-pins {
samsung,pins = "gpc1-2";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV6>;
};
sd1_bus4: sd1-bus-width4 {
sd1_bus4: sd1-bus-width4-pins {
samsung,pins = "gpc1-3", "gpc1-4", "gpc1-5";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV6>;
};
sd1_bus8: sd1-bus-width8 {
sd1_bus8: sd1-bus-width8-pins {
samsung,pins = "gpc4-0", "gpc4-1", "gpc4-2", "gpc4-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV6>;
};
sd2_clk: sd2-clk {
sd2_clk: sd2-clk-pins {
samsung,pins = "gpc2-0";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV6>;
};
sd2_cmd: sd2-cmd {
sd2_cmd: sd2-cmd-pins {
samsung,pins = "gpc2-1";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV6>;
};
sd2_cd: sd2-cd {
sd2_cd: sd2-cd-pins {
samsung,pins = "gpc2-2";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV6>;
};
sd2_bus1: sd2-bus-width1 {
sd2_bus1: sd2-bus-width1-pins {
samsung,pins = "gpc2-3";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV6>;
};
sd2_bus4: sd2-bus-width4 {
sd2_bus4: sd2-bus-width4-pins {
samsung,pins = "gpc2-4", "gpc2-5", "gpc2-6";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
@ -567,7 +567,7 @@
};
&pinctrl_2 {
gpz0: gpz0 {
gpz0: gpz0-gpio-bank {
gpio-controller;
#gpio-cells = <2>;
@ -575,7 +575,7 @@
#interrupt-cells = <2>;
};
gpz1: gpz1 {
gpz1: gpz1-gpio-bank {
gpio-controller;
#gpio-cells = <2>;

Some files were not shown because too many files have changed in this diff Show More