mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git
synced 2024-09-05 18:39:59 +00:00
spi/davinci: add DT binding documentation
Add binding documentation for spi-davinci module. [prakash.pm@ti.com: Follow DT naming convention for compatible property] Signed-off-by: Murali Karicheri <m-karicheri2@ti.com> Acked-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Manjunathappa, Prakash <prakash.pm@ti.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
This commit is contained in:
parent
804413f2dd
commit
eed48556a7
1 changed files with 51 additions and 0 deletions
51
Documentation/devicetree/bindings/spi/spi-davinci.txt
Normal file
51
Documentation/devicetree/bindings/spi/spi-davinci.txt
Normal file
|
@ -0,0 +1,51 @@
|
|||
Davinci SPI controller device bindings
|
||||
|
||||
Required properties:
|
||||
- #address-cells: number of cells required to define a chip select
|
||||
address on the SPI bus. Should be set to 1.
|
||||
- #size-cells: should be zero.
|
||||
- compatible:
|
||||
- "ti,dm6441-spi" for SPI used similar to that on DM644x SoC family
|
||||
- "ti,da830-spi" for SPI used similar to that on DA8xx SoC family
|
||||
- reg: Offset and length of SPI controller register space
|
||||
- num-cs: Number of chip selects
|
||||
- ti,davinci-spi-intr-line: interrupt line used to connect the SPI
|
||||
IP to the interrupt controller within the SoC. Possible values
|
||||
are 0 and 1. Manual says one of the two possible interrupt
|
||||
lines can be tied to the interrupt controller. Set this
|
||||
based on a specifc SoC configuration.
|
||||
- interrupts: interrupt number mapped to CPU.
|
||||
- clocks: spi clk phandle
|
||||
|
||||
Example of a NOR flash slave device (n25q032) connected to DaVinci
|
||||
SPI controller device over the SPI bus.
|
||||
|
||||
spi0:spi@20BF0000 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
compatible = "ti,dm6446-spi";
|
||||
reg = <0x20BF0000 0x1000>;
|
||||
num-cs = <4>;
|
||||
ti,davinci-spi-intr-line = <0>;
|
||||
interrupts = <338>;
|
||||
clocks = <&clkspi>;
|
||||
|
||||
flash: n25q032@0 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
compatible = "st,m25p32";
|
||||
spi-max-frequency = <25000000>;
|
||||
reg = <0>;
|
||||
|
||||
partition@0 {
|
||||
label = "u-boot-spl";
|
||||
reg = <0x0 0x80000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@1 {
|
||||
label = "test";
|
||||
reg = <0x80000 0x380000>;
|
||||
};
|
||||
};
|
||||
};
|
Loading…
Reference in a new issue