Char/Misc driver fixes for 5.19-rc3

Here are some small char/misc driver fixes for 5.19-rc3 that resolve
 some reported issues.
 
 They include:
 	- mei driver fixes
 	- comedi driver fix
 	- rtsx build warning fix
 	- fsl-mc-bus driver fix
 
 All of these have been in linux-next for a while with no reported
 issues.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 
 iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYqw0eA8cZ3JlZ0Brcm9h
 aC5jb20ACgkQMUfUDdst+ymH0wCggIbJo3/FVzs98oMUfx4bGdnu49kAniZpSOrn
 r7dKZ9o8wk11bvsqEEzn
 =KEHD
 -----END PGP SIGNATURE-----

Merge tag 'char-misc-5.19-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc

Pull char/misc driver fixes from Greg KH:
 "Here are some small char/misc driver fixes for 5.19-rc3 that resolve
  some reported issues.

  They include:

   - mei driver fixes

   - comedi driver fix

   - rtsx build warning fix

   - fsl-mc-bus driver fix

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'char-misc-5.19-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
  eeprom: at25: Split reads into chunks and cap write size
  misc: atmel-ssc: Fix IRQ check in ssc_probe
  char: lp: remove redundant initialization of err
This commit is contained in:
Linus Torvalds 2022-06-17 07:58:39 -07:00
commit f0ec9c65a8
3 changed files with 58 additions and 45 deletions

View file

@ -1019,7 +1019,7 @@ static struct parport_driver lp_driver = {
static int __init lp_init(void)
{
int i, err = 0;
int i, err;
if (parport_nr[0] == LP_PARPORT_OFF)
return 0;

View file

@ -232,9 +232,9 @@ static int ssc_probe(struct platform_device *pdev)
clk_disable_unprepare(ssc->clk);
ssc->irq = platform_get_irq(pdev, 0);
if (!ssc->irq) {
if (ssc->irq < 0) {
dev_dbg(&pdev->dev, "could not get irq\n");
return -ENXIO;
return ssc->irq;
}
mutex_lock(&user_lock);

View file

@ -79,6 +79,11 @@ static int at25_ee_read(void *priv, unsigned int offset,
{
struct at25_data *at25 = priv;
char *buf = val;
size_t max_chunk = spi_max_transfer_size(at25->spi);
size_t num_msgs = DIV_ROUND_UP(count, max_chunk);
size_t nr_bytes = 0;
unsigned int msg_offset;
size_t msg_count;
u8 *cp;
ssize_t status;
struct spi_transfer t[2];
@ -92,54 +97,59 @@ static int at25_ee_read(void *priv, unsigned int offset,
if (unlikely(!count))
return -EINVAL;
cp = at25->command;
msg_offset = (unsigned int)offset;
msg_count = min(count, max_chunk);
while (num_msgs) {
cp = at25->command;
instr = AT25_READ;
if (at25->chip.flags & EE_INSTR_BIT3_IS_ADDR)
if (offset >= BIT(at25->addrlen * 8))
instr |= AT25_INSTR_BIT3;
instr = AT25_READ;
if (at25->chip.flags & EE_INSTR_BIT3_IS_ADDR)
if (msg_offset >= BIT(at25->addrlen * 8))
instr |= AT25_INSTR_BIT3;
mutex_lock(&at25->lock);
mutex_lock(&at25->lock);
*cp++ = instr;
*cp++ = instr;
/* 8/16/24-bit address is written MSB first */
switch (at25->addrlen) {
default: /* case 3 */
*cp++ = offset >> 16;
fallthrough;
case 2:
*cp++ = offset >> 8;
fallthrough;
case 1:
case 0: /* can't happen: for better code generation */
*cp++ = offset >> 0;
/* 8/16/24-bit address is written MSB first */
switch (at25->addrlen) {
default: /* case 3 */
*cp++ = msg_offset >> 16;
fallthrough;
case 2:
*cp++ = msg_offset >> 8;
fallthrough;
case 1:
case 0: /* can't happen: for better code generation */
*cp++ = msg_offset >> 0;
}
spi_message_init(&m);
memset(t, 0, sizeof(t));
t[0].tx_buf = at25->command;
t[0].len = at25->addrlen + 1;
spi_message_add_tail(&t[0], &m);
t[1].rx_buf = buf + nr_bytes;
t[1].len = msg_count;
spi_message_add_tail(&t[1], &m);
status = spi_sync(at25->spi, &m);
mutex_unlock(&at25->lock);
if (status)
return status;
--num_msgs;
msg_offset += msg_count;
nr_bytes += msg_count;
}
spi_message_init(&m);
memset(t, 0, sizeof(t));
t[0].tx_buf = at25->command;
t[0].len = at25->addrlen + 1;
spi_message_add_tail(&t[0], &m);
t[1].rx_buf = buf;
t[1].len = count;
spi_message_add_tail(&t[1], &m);
/*
* Read it all at once.
*
* REVISIT that's potentially a problem with large chips, if
* other devices on the bus need to be accessed regularly or
* this chip is clocked very slowly.
*/
status = spi_sync(at25->spi, &m);
dev_dbg(&at25->spi->dev, "read %zu bytes at %d --> %zd\n",
count, offset, status);
mutex_unlock(&at25->lock);
return status;
dev_dbg(&at25->spi->dev, "read %zu bytes at %d\n",
count, offset);
return 0;
}
/* Read extra registers as ID or serial number */
@ -190,6 +200,7 @@ ATTRIBUTE_GROUPS(sernum);
static int at25_ee_write(void *priv, unsigned int off, void *val, size_t count)
{
struct at25_data *at25 = priv;
size_t maxsz = spi_max_transfer_size(at25->spi);
const char *buf = val;
int status = 0;
unsigned buf_size;
@ -253,6 +264,8 @@ static int at25_ee_write(void *priv, unsigned int off, void *val, size_t count)
segment = buf_size - (offset % buf_size);
if (segment > count)
segment = count;
if (segment > maxsz)
segment = maxsz;
memcpy(cp, buf, segment);
status = spi_write(at25->spi, bounce,
segment + at25->addrlen + 1);