Merge branch 'dt/linus' into dt/next

Documentation/devicetree/bindings/Makefile

@@ -19,7 +19,9 @@ quiet_cmd_mk_schema = SCHEMA  $@
 
 DT_DOCS = $(shell \
 	cd $(srctree)/$(src) && \
-	find * \( -name '*.yaml' ! -name $(DT_TMP_SCHEMA) \) \
+	find * \( -name '*.yaml' ! \
+		-name $(DT_TMP_SCHEMA) ! \
+		-name '*.example.dt.yaml' \) \
 	)
 
 DT_SCHEMA_FILES ?= $(addprefix $(src)/,$(DT_DOCS))

Documentation/devicetree/bindings/net/fsl-fec.txt

@@ -7,18 +7,6 @@ Required properties:
 - phy-mode : See ethernet.txt file in the same directory
 
 Optional properties:
-- phy-reset-gpios : Should specify the gpio for phy reset
-- phy-reset-duration : Reset duration in milliseconds.  Should present
-  only if property "phy-reset-gpios" is available.  Missing the property
-  will have the duration be 1 millisecond.  Numbers greater than 1000 are
-  invalid and 1 millisecond will be used instead.
-- phy-reset-active-high : If present then the reset sequence using the GPIO
-  specified in the "phy-reset-gpios" property is reversed (H=reset state,
-  L=operation state).
-- phy-reset-post-delay : Post reset delay in milliseconds. If present then
-  a delay of phy-reset-post-delay milliseconds will be observed after the
-  phy-reset-gpios has been toggled. Can be omitted thus no delay is
-  observed. Delay is in range of 1ms to 1000ms. Other delays are invalid.
 - phy-supply : regulator that powers the Ethernet PHY.
 - phy-handle : phandle to the PHY device connected to this device.
 - fixed-link : Assume a fixed link. See fixed-link.txt in the same directory.
@@ -47,11 +35,27 @@ Optional properties:
   For imx6sx, "int0" handles all 3 queues and ENET_MII. "pps" is for the pulse
   per second interrupt associated with 1588 precision time protocol(PTP).
 
-
 Optional subnodes:
 - mdio : specifies the mdio bus in the FEC, used as a container for phy nodes
   according to phy.txt in the same directory
 
+Deprecated optional properties:
+	To avoid these, create a phy node according to phy.txt in the same
+	directory, and point the fec's "phy-handle" property to it. Then use
+	the phy's reset binding, again described by phy.txt.
+- phy-reset-gpios : Should specify the gpio for phy reset
+- phy-reset-duration : Reset duration in milliseconds.  Should present
+  only if property "phy-reset-gpios" is available.  Missing the property
+  will have the duration be 1 millisecond.  Numbers greater than 1000 are
+  invalid and 1 millisecond will be used instead.
+- phy-reset-active-high : If present then the reset sequence using the GPIO
+  specified in the "phy-reset-gpios" property is reversed (H=reset state,
+  L=operation state).
+- phy-reset-post-delay : Post reset delay in milliseconds. If present then
+  a delay of phy-reset-post-delay milliseconds will be observed after the
+  phy-reset-gpios has been toggled. Can be omitted thus no delay is
+  observed. Delay is in range of 1ms to 1000ms. Other delays are invalid.
+
 Example:
 
 ethernet@83fec000 {

Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.yaml

@@ -37,7 +37,8 @@ properties:
   hwlocks: true
 
   st,syscfg:
-    $ref: "/schemas/types.yaml#/definitions/phandle-array"
+    allOf:
+      - $ref: "/schemas/types.yaml#/definitions/phandle-array"
     description: Should be phandle/offset/mask
     items:
       - description: Phandle to the syscon node which includes IRQ mux selection.

drivers/of/irq.c

@@ -277,7 +277,7 @@ EXPORT_SYMBOL_GPL(of_irq_parse_raw);
  * of_irq_parse_one - Resolve an interrupt for a device
  * @device: the device whose interrupt is to be resolved
  * @index: index of the interrupt to resolve
- * @out_irq: structure of_irq filled by this function
+ * @out_irq: structure of_phandle_args filled by this function
  *
  * This function resolves an interrupt for a node by walking the interrupt tree,
  * finding which interrupt controller node it is attached to, and returning the

drivers/of/resolver.c

@@ -206,16 +206,22 @@ static int adjust_local_phandle_references(struct device_node *local_fixups,
 	for_each_child_of_node(local_fixups, child) {
 
 		for_each_child_of_node(overlay, overlay_child)
-			if (!node_name_cmp(child, overlay_child))
+			if (!node_name_cmp(child, overlay_child)) {
+				of_node_put(overlay_child);
 				break;
+			}
 
-		if (!overlay_child)
+		if (!overlay_child) {
+			of_node_put(child);
 			return -EINVAL;
+		}
 
 		err = adjust_local_phandle_references(child, overlay_child,
 				phandle_delta);
-		if (err)
+		if (err) {
+			of_node_put(child);
 			return err;
+		}
 	}
 
 	return 0;