mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git
synced 2024-08-23 01:10:04 +00:00
usb: dwc2: host: Fix ahbcfg for rk3066
The comment for ahbcfg for rk3066 parameters (also used for rk3288) claimed that ahbcfg was INCR16, but it wasn't. Since the bits weren't shifted properly, the 0x7 ended up being masked and we ended up programming 0x3 for the HBstLen. Let's set it to INCR16 properly. As per Wu Liang Feng at Rockchip this may increase transmission efficiency. I did blackbox tests with writing 0s to a USB-based SD reader (forcefully capping CPU Freq to try to measure efficiency): cd /sys/devices/system/cpu/cpu0/cpufreq echo userspace > scaling_governor echo 126000 > scaling_setspeed for i in $(seq 10); do dd if=/dev/zero of=/dev/sdb bs=1M count=750 done With the above tests I found that speeds went from ~15MB/s to ~18MB/s. Note that most other tests I did (including reading from the same USB reader) didn't show any difference in performance. Tested-by: Heiko Stuebner <heiko@sntech.de> Acked-by: John Youn <johnyoun@synopsys.com> Reviewed-by: Liangfeng Wu <wulf@rock-chips.com> Signed-off-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Felipe Balbi <balbi@ti.com>
This commit is contained in:
parent
2c2025b41a
commit
f16593034a
1 changed files with 2 additions and 1 deletions
|
@ -108,7 +108,8 @@ static const struct dwc2_core_params params_rk3066 = {
|
|||
.host_ls_low_power_phy_clk = -1,
|
||||
.ts_dline = -1,
|
||||
.reload_ctl = -1,
|
||||
.ahbcfg = 0x7, /* INCR16 */
|
||||
.ahbcfg = GAHBCFG_HBSTLEN_INCR16 <<
|
||||
GAHBCFG_HBSTLEN_SHIFT,
|
||||
.uframe_sched = -1,
|
||||
.external_id_pin_ctl = -1,
|
||||
.hibernation = -1,
|
||||
|
|
Loading…
Reference in a new issue