regulator: pv88060: new regulator driver

This is the driver for the Powerventure PV88060 BUCKs and LDOs regulator.
It communicates via an I2C bus to the device.

Signed-off-by: James Ban <James.Ban.opensource@diasemi.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
This commit is contained in:
James Ban 2015-11-19 09:59:15 +09:00 committed by Mark Brown
parent 8005c49d9a
commit f307a7e9b7
5 changed files with 639 additions and 0 deletions

View File

@ -0,0 +1,124 @@
* Powerventure Semiconductor PV88060 Voltage Regulator
Required properties:
- compatible: "pvs,pv88060".
- reg: I2C slave address, usually 0x49.
- interrupts: the interrupt outputs of the controller
- regulators: A node that houses a sub-node for each regulator within the
device. Each sub-node is identified using the node's name, with valid
values listed below. The content of each sub-node is defined by the
standard binding for regulators; see regulator.txt.
BUCK1, LDO1, LDO2, LDO3, LDO4, LDO5, LDO6, LDO7, SW1, SW2, SW3, SW4,
SW5, and SW6.
Optional properties:
- Any optional property defined in regulator.txt
Example
pmic: pv88060@49 {
compatible = "pvs,pv88060";
reg = <0x49>;
interrupt-parent = <&gpio>;
interrupts = <24 24>;
regulators {
BUCK1 {
regulator-name = "buck1";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <4387500>;
regulator-min-microamp = <1496000>;
regulator-max-microamp = <4189000>;
regulator-boot-on;
};
LDO1 {
regulator-name = "ldo1";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <3350000>;
regulator-boot-on;
};
LDO2 {
regulator-name = "ldo2";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <3350000>;
regulator-boot-on;
};
LDO3 {
regulator-name = "ldo3";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <3350000>;
regulator-boot-on;
};
LDO4 {
regulator-name = "ldo4";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <3350000>;
regulator-boot-on;
};
LDO5 {
regulator-name = "ldo5";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <3350000>;
regulator-boot-on;
};
LDO6 {
regulator-name = "ldo6";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <3350000>;
regulator-boot-on;
};
LDO7 {
regulator-name = "ldo7";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <3350000>;
regulator-boot-on;
};
SW1 {
regulator-name = "sw1";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
};
SW2 {
regulator-name = "sw2";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
regulator-boot-on;
};
SW3 {
regulator-name = "sw3";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
regulator-boot-on;
};
SW4 {
regulator-name = "sw4";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
regulator-boot-on;
};
SW5 {
regulator-name = "sw5";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
regulator-boot-on;
};
SW6 {
regulator-name = "sw6";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
};
};
};

View File

@ -504,6 +504,14 @@ config REGULATOR_PFUZE100
Say y here to support the regulators found on the Freescale
PFUZE100/PFUZE200 PMIC.
config REGULATOR_PV88060
tristate "Powerventure Semiconductor PV88060 regulator"
depends on I2C
select REGMAP_I2C
help
Say y here to support the voltage regulators and convertors
PV88060
config REGULATOR_PWM
tristate "PWM voltage regulator"
depends on PWM

View File

@ -66,6 +66,7 @@ obj-$(CONFIG_REGULATOR_QCOM_SMD_RPM) += qcom_smd-regulator.o
obj-$(CONFIG_REGULATOR_QCOM_SPMI) += qcom_spmi-regulator.o
obj-$(CONFIG_REGULATOR_PALMAS) += palmas-regulator.o
obj-$(CONFIG_REGULATOR_PFUZE100) += pfuze100-regulator.o
obj-$(CONFIG_REGULATOR_PV88060) += pv88060-regulator.o
obj-$(CONFIG_REGULATOR_PWM) += pwm-regulator.o
obj-$(CONFIG_REGULATOR_TPS51632) += tps51632-regulator.o
obj-$(CONFIG_REGULATOR_PBIAS) += pbias-regulator.o

View File

@ -0,0 +1,437 @@
/*
* pv88060-regulator.c - Regulator device driver for PV88060
* Copyright (C) 2015 Powerventure Semiconductor Ltd.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version 2
* of the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#include <linux/err.h>
#include <linux/gpio.h>
#include <linux/i2c.h>
#include <linux/module.h>
#include <linux/init.h>
#include <linux/slab.h>
#include <linux/regulator/driver.h>
#include <linux/regulator/machine.h>
#include <linux/regmap.h>
#include <linux/irq.h>
#include <linux/interrupt.h>
#include <linux/regulator/of_regulator.h>
#include <linux/proc_fs.h>
#include <linux/uaccess.h>
#include "pv88060-regulator.h"
#define PV88060_MAX_REGULATORS 14
/* PV88060 REGULATOR IDs */
enum {
/* BUCKs */
PV88060_ID_BUCK1,
/* LDOs */
PV88060_ID_LDO1,
PV88060_ID_LDO2,
PV88060_ID_LDO3,
PV88060_ID_LDO4,
PV88060_ID_LDO5,
PV88060_ID_LDO6,
PV88060_ID_LDO7,
/* SWTs */
PV88060_ID_SW1,
PV88060_ID_SW2,
PV88060_ID_SW3,
PV88060_ID_SW4,
PV88060_ID_SW5,
PV88060_ID_SW6,
};
struct pv88060_regulator {
struct regulator_desc desc;
/* Current limiting */
unsigned n_current_limits;
const int *current_limits;
unsigned int limit_mask;
unsigned int conf; /* buck configuration register */
};
struct pv88060 {
struct device *dev;
struct regmap *regmap;
struct regulator_dev *rdev[PV88060_MAX_REGULATORS];
};
static const struct regmap_config pv88060_regmap_config = {
.reg_bits = 8,
.val_bits = 8,
};
/* Current limits array (in uA) for BUCK1
* Entry indexes corresponds to register values.
*/
static const int pv88060_buck1_limits[] = {
1496000, 2393000, 3291000, 4189000
};
static unsigned int pv88060_buck_get_mode(struct regulator_dev *rdev)
{
struct pv88060_regulator *info = rdev_get_drvdata(rdev);
unsigned int data;
int ret, mode = 0;
ret = regmap_read(rdev->regmap, info->conf, &data);
if (ret < 0)
return ret;
switch (data & PV88060_BUCK_MODE_MASK) {
case PV88060_BUCK_MODE_SYNC:
mode = REGULATOR_MODE_FAST;
break;
case PV88060_BUCK_MODE_AUTO:
mode = REGULATOR_MODE_NORMAL;
break;
case PV88060_BUCK_MODE_SLEEP:
mode = REGULATOR_MODE_STANDBY;
break;
}
return mode;
}
static int pv88060_buck_set_mode(struct regulator_dev *rdev,
unsigned int mode)
{
struct pv88060_regulator *info = rdev_get_drvdata(rdev);
int val = 0;
switch (mode) {
case REGULATOR_MODE_FAST:
val = PV88060_BUCK_MODE_SYNC;
break;
case REGULATOR_MODE_NORMAL:
val = PV88060_BUCK_MODE_AUTO;
break;
case REGULATOR_MODE_STANDBY:
val = PV88060_BUCK_MODE_SLEEP;
break;
default:
return -EINVAL;
}
return regmap_update_bits(rdev->regmap, info->conf,
PV88060_BUCK_MODE_MASK, val);
}
static int pv88060_set_current_limit(struct regulator_dev *rdev, int min,
int max)
{
struct pv88060_regulator *info = rdev_get_drvdata(rdev);
int i;
/* search for closest to maximum */
for (i = info->n_current_limits; i >= 0; i--) {
if (min <= info->current_limits[i]
&& max >= info->current_limits[i]) {
return regmap_update_bits(rdev->regmap,
info->conf,
info->limit_mask,
i << PV88060_BUCK_ILIM_SHIFT);
}
}
return -EINVAL;
}
static int pv88060_get_current_limit(struct regulator_dev *rdev)
{
struct pv88060_regulator *info = rdev_get_drvdata(rdev);
unsigned int data;
int ret;
ret = regmap_read(rdev->regmap, info->conf, &data);
if (ret < 0)
return ret;
data = (data & info->limit_mask) >> PV88060_BUCK_ILIM_SHIFT;
return info->current_limits[data];
}
static struct regulator_ops pv88060_buck_ops = {
.get_mode = pv88060_buck_get_mode,
.set_mode = pv88060_buck_set_mode,
.enable = regulator_enable_regmap,
.disable = regulator_disable_regmap,
.is_enabled = regulator_is_enabled_regmap,
.set_voltage_sel = regulator_set_voltage_sel_regmap,
.get_voltage_sel = regulator_get_voltage_sel_regmap,
.list_voltage = regulator_list_voltage_linear,
.set_current_limit = pv88060_set_current_limit,
.get_current_limit = pv88060_get_current_limit,
};
static struct regulator_ops pv88060_ldo_ops = {
.enable = regulator_enable_regmap,
.disable = regulator_disable_regmap,
.is_enabled = regulator_is_enabled_regmap,
.set_voltage_sel = regulator_set_voltage_sel_regmap,
.get_voltage_sel = regulator_get_voltage_sel_regmap,
.list_voltage = regulator_list_voltage_linear,
};
#define PV88060_BUCK(chip, regl_name, min, step, max, limits_array) \
{\
.desc = {\
.id = chip##_ID_##regl_name,\
.name = __stringify(chip##_##regl_name),\
.of_match = of_match_ptr(#regl_name),\
.regulators_node = of_match_ptr("regulators"),\
.type = REGULATOR_VOLTAGE,\
.owner = THIS_MODULE,\
.ops = &pv88060_buck_ops,\
.min_uV = min,\
.uV_step = step,\
.n_voltages = ((max) - (min))/(step) + 1,\
.enable_reg = PV88060_REG_##regl_name##_CONF0,\
.enable_mask = PV88060_BUCK_EN, \
.vsel_reg = PV88060_REG_##regl_name##_CONF0,\
.vsel_mask = PV88060_VBUCK_MASK,\
},\
.current_limits = limits_array,\
.n_current_limits = ARRAY_SIZE(limits_array),\
.limit_mask = PV88060_BUCK_ILIM_MASK, \
.conf = PV88060_REG_##regl_name##_CONF1,\
}
#define PV88060_LDO(chip, regl_name, min, step, max) \
{\
.desc = {\
.id = chip##_ID_##regl_name,\
.name = __stringify(chip##_##regl_name),\
.of_match = of_match_ptr(#regl_name),\
.regulators_node = of_match_ptr("regulators"),\
.type = REGULATOR_VOLTAGE,\
.owner = THIS_MODULE,\
.ops = &pv88060_ldo_ops,\
.min_uV = min, \
.uV_step = step, \
.n_voltages = (step) ? ((max - min) / step + 1) : 1, \
.enable_reg = PV88060_REG_##regl_name##_CONF, \
.enable_mask = PV88060_LDO_EN, \
.vsel_reg = PV88060_REG_##regl_name##_CONF, \
.vsel_mask = PV88060_VLDO_MASK, \
},\
}
#define PV88060_SW(chip, regl_name, max) \
{\
.desc = {\
.id = chip##_ID_##regl_name,\
.name = __stringify(chip##_##regl_name),\
.of_match = of_match_ptr(#regl_name),\
.regulators_node = of_match_ptr("regulators"),\
.type = REGULATOR_VOLTAGE,\
.owner = THIS_MODULE,\
.ops = &pv88060_ldo_ops,\
.min_uV = max,\
.uV_step = 0,\
.n_voltages = 1,\
.enable_reg = PV88060_REG_##regl_name##_CONF,\
.enable_mask = PV88060_SW_EN,\
},\
}
static const struct pv88060_regulator pv88060_regulator_info[] = {
PV88060_BUCK(PV88060, BUCK1, 2800000, 12500, 4387500,
pv88060_buck1_limits),
PV88060_LDO(PV88060, LDO1, 1200000, 50000, 3350000),
PV88060_LDO(PV88060, LDO2, 1200000, 50000, 3350000),
PV88060_LDO(PV88060, LDO3, 1200000, 50000, 3350000),
PV88060_LDO(PV88060, LDO4, 1200000, 50000, 3350000),
PV88060_LDO(PV88060, LDO5, 1200000, 50000, 3350000),
PV88060_LDO(PV88060, LDO6, 1200000, 50000, 3350000),
PV88060_LDO(PV88060, LDO7, 1200000, 50000, 3350000),
PV88060_SW(PV88060, SW1, 5000000),
PV88060_SW(PV88060, SW2, 5000000),
PV88060_SW(PV88060, SW3, 5000000),
PV88060_SW(PV88060, SW4, 5000000),
PV88060_SW(PV88060, SW5, 5000000),
PV88060_SW(PV88060, SW6, 5000000),
};
static irqreturn_t pv88060_irq_handler(int irq, void *data)
{
struct pv88060 *chip = data;
int i, reg_val, err, ret = IRQ_NONE;
err = regmap_read(chip->regmap, PV88060_REG_EVENT_A, &reg_val);
if (err < 0)
goto error_i2c;
if (reg_val & PV88060_E_VDD_FLT) {
for (i = 0; i < PV88060_MAX_REGULATORS; i++) {
if (chip->rdev[i] != NULL) {
regulator_notifier_call_chain(chip->rdev[i],
REGULATOR_EVENT_UNDER_VOLTAGE,
NULL);
}
}
err = regmap_update_bits(chip->regmap, PV88060_REG_EVENT_A,
PV88060_E_VDD_FLT, PV88060_E_VDD_FLT);
if (err < 0)
goto error_i2c;
ret = IRQ_HANDLED;
}
if (reg_val & PV88060_E_OVER_TEMP) {
for (i = 0; i < PV88060_MAX_REGULATORS; i++) {
if (chip->rdev[i] != NULL) {
regulator_notifier_call_chain(chip->rdev[i],
REGULATOR_EVENT_OVER_TEMP,
NULL);
}
}
err = regmap_update_bits(chip->regmap, PV88060_REG_EVENT_A,
PV88060_E_OVER_TEMP, PV88060_E_OVER_TEMP);
if (err < 0)
goto error_i2c;
ret = IRQ_HANDLED;
}
return ret;
error_i2c:
dev_err(chip->dev, "I2C error : %d\n", err);
return IRQ_NONE;
}
/*
* I2C driver interface functions
*/
static int pv88060_i2c_probe(struct i2c_client *i2c,
const struct i2c_device_id *id)
{
struct regulator_init_data *init_data = dev_get_platdata(&i2c->dev);
struct pv88060 *chip;
struct regulator_config config = { };
int error, i, ret = 0;
chip = devm_kzalloc(&i2c->dev, sizeof(struct pv88060), GFP_KERNEL);
if (!chip)
return -ENOMEM;
chip->dev = &i2c->dev;
chip->regmap = devm_regmap_init_i2c(i2c, &pv88060_regmap_config);
if (IS_ERR(chip->regmap)) {
error = PTR_ERR(chip->regmap);
dev_err(chip->dev, "Failed to allocate register map: %d\n",
error);
return error;
}
i2c_set_clientdata(i2c, chip);
if (i2c->irq != 0) {
ret = regmap_write(chip->regmap, PV88060_REG_MASK_A, 0xFF);
if (ret < 0) {
dev_err(chip->dev,
"Failed to mask A reg: %d\n", ret);
return ret;
}
regmap_write(chip->regmap, PV88060_REG_MASK_B, 0xFF);
if (ret < 0) {
dev_err(chip->dev,
"Failed to mask B reg: %d\n", ret);
return ret;
}
regmap_write(chip->regmap, PV88060_REG_MASK_C, 0xFF);
if (ret < 0) {
dev_err(chip->dev,
"Failed to mask C reg: %d\n", ret);
return ret;
}
ret = request_threaded_irq(i2c->irq, NULL,
pv88060_irq_handler,
IRQF_TRIGGER_LOW|IRQF_ONESHOT,
"pv88060", chip);
if (ret != 0) {
dev_err(chip->dev, "Failed to request IRQ: %d\n",
i2c->irq);
return ret;
}
ret = regmap_update_bits(chip->regmap, PV88060_REG_MASK_A,
PV88060_M_VDD_FLT | PV88060_M_OVER_TEMP, 0);
if (ret < 0) {
dev_err(chip->dev,
"Failed to update mask reg: %d\n", ret);
return ret;
}
} else {
dev_warn(chip->dev, "No IRQ configured\n");
}
config.dev = chip->dev;
config.regmap = chip->regmap;
for (i = 0; i < PV88060_MAX_REGULATORS; i++) {
if (init_data)
config.init_data = &init_data[i];
config.driver_data = (void *)&pv88060_regulator_info[i];
chip->rdev[i] = devm_regulator_register(chip->dev,
&pv88060_regulator_info[i].desc, &config);
if (IS_ERR(chip->rdev[i])) {
dev_err(chip->dev,
"Failed to register PV88060 regulator\n");
return PTR_ERR(chip->rdev[i]);
}
}
return 0;
}
static const struct i2c_device_id pv88060_i2c_id[] = {
{"pv88060", 0},
{},
};
MODULE_DEVICE_TABLE(i2c, pv88060_i2c_id);
#ifdef CONFIG_OF
static const struct of_device_id pv88060_dt_ids[] = {
{ .compatible = "pvs,pv88060", .data = &pv88060_i2c_id[0] },
{},
};
MODULE_DEVICE_TABLE(of, pv88060_dt_ids);
#endif
static struct i2c_driver pv88060_regulator_driver = {
.driver = {
.name = "pv88060",
.of_match_table = of_match_ptr(pv88060_dt_ids),
},
.probe = pv88060_i2c_probe,
.id_table = pv88060_i2c_id,
};
module_i2c_driver(pv88060_regulator_driver);
MODULE_AUTHOR("James Ban <James.Ban.opensource@diasemi.com>");
MODULE_DESCRIPTION("Regulator device driver for Powerventure PV88060");
MODULE_LICENSE("GPL");

View File

@ -0,0 +1,69 @@
/*
* pv88060-regulator.h - Regulator definitions for PV88060
* Copyright (C) 2015 Powerventure Semiconductor Ltd.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version 2
* of the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#ifndef __PV88060_REGISTERS_H__
#define __PV88060_REGISTERS_H__
/* System Control and Event Registers */
#define PV88060_REG_EVENT_A 0x04
#define PV88060_REG_MASK_A 0x08
#define PV88060_REG_MASK_B 0x09
#define PV88060_REG_MASK_C 0x0A
/* Regulator Registers */
#define PV88060_REG_BUCK1_CONF0 0x1B
#define PV88060_REG_BUCK1_CONF1 0x1C
#define PV88060_REG_LDO1_CONF 0x1D
#define PV88060_REG_LDO2_CONF 0x1E
#define PV88060_REG_LDO3_CONF 0x1F
#define PV88060_REG_LDO4_CONF 0x20
#define PV88060_REG_LDO5_CONF 0x21
#define PV88060_REG_LDO6_CONF 0x22
#define PV88060_REG_LDO7_CONF 0x23
#define PV88060_REG_SW1_CONF 0x3B
#define PV88060_REG_SW2_CONF 0x3C
#define PV88060_REG_SW3_CONF 0x3D
#define PV88060_REG_SW4_CONF 0x3E
#define PV88060_REG_SW5_CONF 0x3F
#define PV88060_REG_SW6_CONF 0x40
/* PV88060_REG_EVENT_A (addr=0x04) */
#define PV88060_E_VDD_FLT 0x01
#define PV88060_E_OVER_TEMP 0x02
/* PV88060_REG_MASK_A (addr=0x08) */
#define PV88060_M_VDD_FLT 0x01
#define PV88060_M_OVER_TEMP 0x02
/* PV88060_REG_BUCK1_CONF0 (addr=0x1B) */
#define PV88060_BUCK_EN 0x80
#define PV88060_VBUCK_MASK 0x7F
/* PV88060_REG_LDO1/2/3/4/5/6/7_CONT */
#define PV88060_LDO_EN 0x40
#define PV88060_VLDO_MASK 0x3F
/* PV88060_REG_SW1/2/3/4/5_CONF */
#define PV88060_SW_EN 0x80
/* PV88060_REG_BUCK1_CONF1 (addr=0x1C) */
#define PV88060_BUCK_ILIM_SHIFT 2
#define PV88060_BUCK_ILIM_MASK 0x0C
#define PV88060_BUCK_MODE_SHIFT 0
#define PV88060_BUCK_MODE_MASK 0x03
#define PV88060_BUCK_MODE_SLEEP 0x00
#define PV88060_BUCK_MODE_AUTO 0x01
#define PV88060_BUCK_MODE_SYNC 0x02
#endif /* __PV88060_REGISTERS_H__ */