ARM: shmobile: armadillo800eva: Replace GPIO_PORTx with GPIO port numbers

The PFC GPIO API implementation moved to using port numbers. Replace all
GPIO_PORTx enum usage with the corresponding port number. The GPIO_PORTx
enum values are identical to the port number on this platform.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
This commit is contained in:
Laurent Pinchart 2013-04-23 00:32:52 +02:00 committed by Simon Horman
parent 1b5961c31d
commit f5c02edc51

View file

@ -584,7 +584,7 @@ static struct regulator_init_data vcc_sdhi0_init_data = {
static struct fixed_voltage_config vcc_sdhi0_info = {
.supply_name = "SDHI0 Vcc",
.microvolts = 3300000,
.gpio = GPIO_PORT75,
.gpio = 75,
.enable_high = 1,
.init_data = &vcc_sdhi0_init_data,
};
@ -615,7 +615,7 @@ static struct regulator_init_data vccq_sdhi0_init_data = {
};
static struct gpio vccq_sdhi0_gpios[] = {
{GPIO_PORT17, GPIOF_OUT_INIT_LOW, "vccq-sdhi0" },
{17, GPIOF_OUT_INIT_LOW, "vccq-sdhi0" },
};
static struct gpio_regulator_state vccq_sdhi0_states[] = {
@ -626,7 +626,7 @@ static struct gpio_regulator_state vccq_sdhi0_states[] = {
static struct gpio_regulator_config vccq_sdhi0_info = {
.supply_name = "vqmmc",
.enable_gpio = GPIO_PORT74,
.enable_gpio = 74,
.enable_high = 1,
.enabled_at_boot = 0,
@ -664,7 +664,7 @@ static struct regulator_init_data vcc_sdhi1_init_data = {
static struct fixed_voltage_config vcc_sdhi1_info = {
.supply_name = "SDHI1 Vcc",
.microvolts = 3300000,
.gpio = GPIO_PORT16,
.gpio = 16,
.enable_high = 1,
.init_data = &vcc_sdhi1_init_data,
};
@ -693,7 +693,7 @@ static struct sh_mobile_sdhi_info sdhi0_info = {
.tmio_caps = MMC_CAP_SD_HIGHSPEED | MMC_CAP_SDIO_IRQ |
MMC_CAP_POWER_OFF_CARD,
.tmio_flags = TMIO_MMC_HAS_IDLE_WAIT | TMIO_MMC_USE_GPIO_CD,
.cd_gpio = GPIO_PORT167,
.cd_gpio = 167,
};
static struct resource sdhi0_resources[] = {
@ -736,7 +736,7 @@ static struct sh_mobile_sdhi_info sdhi1_info = {
MMC_CAP_POWER_OFF_CARD,
.tmio_flags = TMIO_MMC_HAS_IDLE_WAIT | TMIO_MMC_USE_GPIO_CD,
/* Port72 cannot generate IRQs, will be used in polling mode. */
.cd_gpio = GPIO_PORT72,
.cd_gpio = 72,
};
static struct resource sdhi1_resources[] = {