mirrors
/
linux-stable
mirror of https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git
1
0
Fork 0
Code Issues Releases Wiki Activity

Merge branch 'clk-iproc' into clk-next 

* clk-iproc:
  clk: iproc: define Broadcom NS2 iProc clock binding
  clk: iproc: define Broadcom NSP iProc clock binding
  clk: ns2: add clock support for Broadcom Northstar 2 SoC
  clk: iproc: Separate status and control variables
  clk: iproc: Split off dig_filter
  clk: iproc: Add PLL base write function
  clk: nsp: add clock support for Broadcom Northstar Plus SoC
  clk: iproc: Add PWRCTRL support
  clk: cygnus: Convert all macros to all caps
  ARM: cygnus: fix link failures when CONFIG_COMMON_CLK_IPROC is disabled
This commit is contained in:
Stephen Boyd 2015-10-21 17:28:19 -07:00
parent 938ce30e29 0064c86234
commit f63d19ef52
12 changed files with 840 additions and 159 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

78
Documentation/devicetree/bindings/clock/brcm,iproc-clocks.txt
View File

@ -130,3 +130,81 @@ These clock IDs are defined in:
ch3_unused mipipll 4 BCM_CYGNUS_MIPIPLL_CH3_UNUSED
ch4_unused mipipll 5 BCM_CYGNUS_MIPIPLL_CH4_UNUSED
ch5_unused mipipll 6 BCM_CYGNUS_MIPIPLL_CH5_UNUSED
Northstar and Northstar Plus
------
PLL and leaf clock compatible strings for Northstar and Northstar Plus are:
"brcm,nsp-armpll"
"brcm,nsp-genpll"
"brcm,nsp-lcpll0"
The following table defines the set of PLL/clock index and ID for Northstar and
Northstar Plus. These clock IDs are defined in:
"include/dt-bindings/clock/bcm-nsp.h"
Clock Source Index ID
--- ----- ----- ---------
crystal N/A N/A N/A
armpll crystal N/A N/A
genpll crystal 0 BCM_NSP_GENPLL
phy genpll 1 BCM_NSP_GENPLL_PHY_CLK
ethernetclk genpll 2 BCM_NSP_GENPLL_ENET_SW_CLK
usbclk genpll 3 BCM_NSP_GENPLL_USB_PHY_REF_CLK
iprocfast genpll 4 BCM_NSP_GENPLL_IPROCFAST_CLK
sata1 genpll 5 BCM_NSP_GENPLL_SATA1_CLK
sata2 genpll 6 BCM_NSP_GENPLL_SATA2_CLK
lcpll0 crystal 0 BCM_NSP_LCPLL0
pcie_phy lcpll0 1 BCM_NSP_LCPLL0_PCIE_PHY_REF_CLK
sdio lcpll0 2 BCM_NSP_LCPLL0_SDIO_CLK
ddr_phy lcpll0 3 BCM_NSP_LCPLL0_DDR_PHY_CLK
Northstar 2
-----------
PLL and leaf clock compatible strings for Northstar 2 are:
"brcm,ns2-genpll-scr"
"brcm,ns2-genpll-sw"
"brcm,ns2-lcpll-ddr"
"brcm,ns2-lcpll-ports"
The following table defines the set of PLL/clock index and ID for Northstar 2.
These clock IDs are defined in:
"include/dt-bindings/clock/bcm-ns2.h"
Clock Source Index ID
--- ----- ----- ---------
crystal N/A N/A N/A
genpll_scr crystal 0 BCM_NS2_GENPLL_SCR
scr genpll_scr 1 BCM_NS2_GENPLL_SCR_SCR_CLK
fs genpll_scr 2 BCM_NS2_GENPLL_SCR_FS_CLK
audio_ref genpll_scr 3 BCM_NS2_GENPLL_SCR_AUDIO_CLK
ch3_unused genpll_scr 4 BCM_NS2_GENPLL_SCR_CH3_UNUSED
ch4_unused genpll_scr 5 BCM_NS2_GENPLL_SCR_CH4_UNUSED
ch5_unused genpll_scr 6 BCM_NS2_GENPLL_SCR_CH5_UNUSED
genpll_sw crystal 0 BCM_NS2_GENPLL_SW
rpe genpll_sw 1 BCM_NS2_GENPLL_SW_RPE_CLK
250 genpll_sw 2 BCM_NS2_GENPLL_SW_250_CLK
nic genpll_sw 3 BCM_NS2_GENPLL_SW_NIC_CLK
chimp genpll_sw 4 BCM_NS2_GENPLL_SW_CHIMP_CLK
port genpll_sw 5 BCM_NS2_GENPLL_SW_PORT_CLK
sdio genpll_sw 6 BCM_NS2_GENPLL_SW_SDIO_CLK
lcpll_ddr crystal 0 BCM_NS2_LCPLL_DDR
pcie_sata_usb lcpll_ddr 1 BCM_NS2_LCPLL_DDR_PCIE_SATA_USB_CLK
ddr lcpll_ddr 2 BCM_NS2_LCPLL_DDR_DDR_CLK
ch2_unused lcpll_ddr 3 BCM_NS2_LCPLL_DDR_CH2_UNUSED
ch3_unused lcpll_ddr 4 BCM_NS2_LCPLL_DDR_CH3_UNUSED
ch4_unused lcpll_ddr 5 BCM_NS2_LCPLL_DDR_CH4_UNUSED
ch5_unused lcpll_ddr 6 BCM_NS2_LCPLL_DDR_CH5_UNUSED
lcpll_ports crystal 0 BCM_NS2_LCPLL_PORTS
wan lcpll_ports 1 BCM_NS2_LCPLL_PORTS_WAN_CLK
rgmii lcpll_ports 2 BCM_NS2_LCPLL_PORTS_RGMII_CLK
ch2_unused lcpll_ports 3 BCM_NS2_LCPLL_PORTS_CH2_UNUSED
ch3_unused lcpll_ports 4 BCM_NS2_LCPLL_PORTS_CH3_UNUSED
ch4_unused lcpll_ports 5 BCM_NS2_LCPLL_PORTS_CH4_UNUSED
ch5_unused lcpll_ports 6 BCM_NS2_LCPLL_PORTS_CH5_UNUSED

2
arch/arm/mach-bcm/Kconfig
View File

@ -14,7 +14,7 @@ config ARCH_BCM_IPROC
select HAVE_ARM_SCU if SMP
select HAVE_ARM_TWD if SMP
select ARM_GLOBAL_TIMER
select COMMON_CLK_IPROC
select CLKSRC_MMIO
select ARCH_REQUIRE_GPIOLIB
select ARM_AMBA

2
drivers/clk/Makefile
View File

@ -48,7 +48,7 @@ obj-$(CONFIG_COMMON_CLK_WM831X) += clk-wm831x.o
obj-$(CONFIG_COMMON_CLK_XGENE) += clk-xgene.o
obj-$(CONFIG_COMMON_CLK_PWM) += clk-pwm.o
obj-$(CONFIG_COMMON_CLK_AT91) += at91/
obj-$(CONFIG_ARCH_BCM) += bcm/
obj-y += bcm/
obj-$(CONFIG_ARCH_BERLIN) += berlin/
obj-$(CONFIG_ARCH_HISI) += hisilicon/
obj-$(CONFIG_ARCH_MXC) += imx/

4
drivers/clk/bcm/Kconfig
View File

@ -9,10 +9,8 @@ config CLK_BCM_KONA
in the BCM281xx and BCM21664 families.
config COMMON_CLK_IPROC
bool "Broadcom iProc clock support"
depends on ARCH_BCM_IPROC || COMPILE_TEST
bool
depends on COMMON_CLK
default ARCH_BCM_IPROC
help
Enable common clock framework support for Broadcom SoCs
based on the iProc architecture

3
drivers/clk/bcm/Makefile
View File

@ -4,4 +4,7 @@ obj-$(CONFIG_CLK_BCM_KONA) += clk-bcm281xx.o
obj-$(CONFIG_CLK_BCM_KONA) += clk-bcm21664.o
obj-$(CONFIG_COMMON_CLK_IPROC) += clk-iproc-armpll.o clk-iproc-pll.o clk-iproc-asiu.o
obj-$(CONFIG_ARCH_BCM2835) += clk-bcm2835.o
obj-$(CONFIG_COMMON_CLK_IPROC) += clk-ns2.o
obj-$(CONFIG_ARCH_BCM_CYGNUS) += clk-cygnus.o
obj-$(CONFIG_ARCH_BCM_NSP) += clk-nsp.o
obj-$(CONFIG_ARCH_BCM_5301X) += clk-nsp.o

155
drivers/clk/bcm/clk-cygnus.c
View File

@ -23,28 +23,30 @@
#include <dt-bindings/clock/bcm-cygnus.h>
#include "clk-iproc.h"
#define reg_val(o, s, w) { .offset = o, .shift = s, .width = w, }
#define REG_VAL(o, s, w) { .offset = o, .shift = s, .width = w, }
#define aon_val(o, pw, ps, is) { .offset = o, .pwr_width = pw, \
#define AON_VAL(o, pw, ps, is) { .offset = o, .pwr_width = pw, \
.pwr_shift = ps, .iso_shift = is }
#define sw_ctrl_val(o, s) { .offset = o, .shift = s, }
#define SW_CTRL_VAL(o, s) { .offset = o, .shift = s, }
#define asiu_div_val(o, es, hs, hw, ls, lw) \
#define ASIU_DIV_VAL(o, es, hs, hw, ls, lw) \
{ .offset = o, .en_shift = es, .high_shift = hs, \
.high_width = hw, .low_shift = ls, .low_width = lw }
#define reset_val(o, rs, prs, kis, kiw, kps, kpw, kas, kaw) { .offset = o, \
.reset_shift = rs, .p_reset_shift = prs, .ki_shift = kis, \
.ki_width = kiw, .kp_shift = kps, .kp_width = kpw, .ka_shift = kas, \
#define RESET_VAL(o, rs, prs) { .offset = o, .reset_shift = rs, \
.p_reset_shift = prs }
#define DF_VAL(o, kis, kiw, kps, kpw, kas, kaw) { .offset = o, .ki_shift = kis,\
.ki_width = kiw, .kp_shift = kps, .kp_width = kpw, .ka_shift = kas, \
.ka_width = kaw }
#define vco_ctrl_val(uo, lo) { .u_offset = uo, .l_offset = lo }
#define VCO_CTRL_VAL(uo, lo) { .u_offset = uo, .l_offset = lo }
#define enable_val(o, es, hs, bs) { .offset = o, .enable_shift = es, \
#define ENABLE_VAL(o, es, hs, bs) { .offset = o, .enable_shift = es, \
.hold_shift = hs, .bypass_shift = bs }
#define asiu_gate_val(o, es) { .offset = o, .en_shift = es }
#define ASIU_GATE_VAL(o, es) { .offset = o, .en_shift = es }
static void __init cygnus_armpll_init(struct device_node *node)
{
@ -55,52 +57,53 @@ CLK_OF_DECLARE(cygnus_armpll, "brcm,cygnus-armpll", cygnus_armpll_init);
static const struct iproc_pll_ctrl genpll = {
.flags = IPROC_CLK_AON | IPROC_CLK_PLL_HAS_NDIV_FRAC |
IPROC_CLK_PLL_NEEDS_SW_CFG,
.aon = aon_val(0x0, 2, 1, 0),
.reset = reset_val(0x0, 11, 10, 4, 3, 0, 4, 7, 3),
.sw_ctrl = sw_ctrl_val(0x10, 31),
.ndiv_int = reg_val(0x10, 20, 10),
.ndiv_frac = reg_val(0x10, 0, 20),
.pdiv = reg_val(0x14, 0, 4),
.vco_ctrl = vco_ctrl_val(0x18, 0x1c),
.status = reg_val(0x28, 12, 1),
.aon = AON_VAL(0x0, 2, 1, 0),
.reset = RESET_VAL(0x0, 11, 10),
.dig_filter = DF_VAL(0x0, 4, 3, 0, 4, 7, 3),
.sw_ctrl = SW_CTRL_VAL(0x10, 31),
.ndiv_int = REG_VAL(0x10, 20, 10),
.ndiv_frac = REG_VAL(0x10, 0, 20),
.pdiv = REG_VAL(0x14, 0, 4),
.vco_ctrl = VCO_CTRL_VAL(0x18, 0x1c),
.status = REG_VAL(0x28, 12, 1),
};
static const struct iproc_clk_ctrl genpll_clk[] = {
[BCM_CYGNUS_GENPLL_AXI21_CLK] = {
.channel = BCM_CYGNUS_GENPLL_AXI21_CLK,
.flags = IPROC_CLK_AON,
.enable = enable_val(0x4, 6, 0, 12),
.mdiv = reg_val(0x20, 0, 8),
.enable = ENABLE_VAL(0x4, 6, 0, 12),
.mdiv = REG_VAL(0x20, 0, 8),
},
[BCM_CYGNUS_GENPLL_250MHZ_CLK] = {
.channel = BCM_CYGNUS_GENPLL_250MHZ_CLK,
.flags = IPROC_CLK_AON,
.enable = enable_val(0x4, 7, 1, 13),
.mdiv = reg_val(0x20, 10, 8),
.enable = ENABLE_VAL(0x4, 7, 1, 13),
.mdiv = REG_VAL(0x20, 10, 8),
},
[BCM_CYGNUS_GENPLL_IHOST_SYS_CLK] = {
.channel = BCM_CYGNUS_GENPLL_IHOST_SYS_CLK,
.flags = IPROC_CLK_AON,
.enable = enable_val(0x4, 8, 2, 14),
.mdiv = reg_val(0x20, 20, 8),
.enable = ENABLE_VAL(0x4, 8, 2, 14),
.mdiv = REG_VAL(0x20, 20, 8),
},
[BCM_CYGNUS_GENPLL_ENET_SW_CLK] = {
.channel = BCM_CYGNUS_GENPLL_ENET_SW_CLK,
.flags = IPROC_CLK_AON,
.enable = enable_val(0x4, 9, 3, 15),
.mdiv = reg_val(0x24, 0, 8),
.enable = ENABLE_VAL(0x4, 9, 3, 15),
.mdiv = REG_VAL(0x24, 0, 8),
},
[BCM_CYGNUS_GENPLL_AUDIO_125_CLK] = {
.channel = BCM_CYGNUS_GENPLL_AUDIO_125_CLK,
.flags = IPROC_CLK_AON,
.enable = enable_val(0x4, 10, 4, 16),
.mdiv = reg_val(0x24, 10, 8),
.enable = ENABLE_VAL(0x4, 10, 4, 16),
.mdiv = REG_VAL(0x24, 10, 8),
},
[BCM_CYGNUS_GENPLL_CAN_CLK] = {
.channel = BCM_CYGNUS_GENPLL_CAN_CLK,
.flags = IPROC_CLK_AON,
.enable = enable_val(0x4, 11, 5, 17),
.mdiv = reg_val(0x24, 20, 8),
.enable = ENABLE_VAL(0x4, 11, 5, 17),
.mdiv = REG_VAL(0x24, 20, 8),
},
};
@ -113,51 +116,52 @@ CLK_OF_DECLARE(cygnus_genpll, "brcm,cygnus-genpll", cygnus_genpll_clk_init);
static const struct iproc_pll_ctrl lcpll0 = {
.flags = IPROC_CLK_AON | IPROC_CLK_PLL_NEEDS_SW_CFG,
.aon = aon_val(0x0, 2, 5, 4),
.reset = reset_val(0x0, 31, 30, 27, 3, 23, 4, 19, 4),
.sw_ctrl = sw_ctrl_val(0x4, 31),
.ndiv_int = reg_val(0x4, 16, 10),
.pdiv = reg_val(0x4, 26, 4),
.vco_ctrl = vco_ctrl_val(0x10, 0x14),
.status = reg_val(0x18, 12, 1),
.aon = AON_VAL(0x0, 2, 5, 4),
.reset = RESET_VAL(0x0, 31, 30),
.dig_filter = DF_VAL(0x0, 27, 3, 23, 4, 19, 4),
.sw_ctrl = SW_CTRL_VAL(0x4, 31),
.ndiv_int = REG_VAL(0x4, 16, 10),
.pdiv = REG_VAL(0x4, 26, 4),
.vco_ctrl = VCO_CTRL_VAL(0x10, 0x14),
.status = REG_VAL(0x18, 12, 1),
};
static const struct iproc_clk_ctrl lcpll0_clk[] = {
[BCM_CYGNUS_LCPLL0_PCIE_PHY_REF_CLK] = {
.channel = BCM_CYGNUS_LCPLL0_PCIE_PHY_REF_CLK,
.flags = IPROC_CLK_AON,
.enable = enable_val(0x0, 7, 1, 13),
.mdiv = reg_val(0x8, 0, 8),
.enable = ENABLE_VAL(0x0, 7, 1, 13),
.mdiv = REG_VAL(0x8, 0, 8),
},
[BCM_CYGNUS_LCPLL0_DDR_PHY_CLK] = {
.channel = BCM_CYGNUS_LCPLL0_DDR_PHY_CLK,
.flags = IPROC_CLK_AON,
.enable = enable_val(0x0, 8, 2, 14),
.mdiv = reg_val(0x8, 10, 8),
.enable = ENABLE_VAL(0x0, 8, 2, 14),
.mdiv = REG_VAL(0x8, 10, 8),
},
[BCM_CYGNUS_LCPLL0_SDIO_CLK] = {
.channel = BCM_CYGNUS_LCPLL0_SDIO_CLK,
.flags = IPROC_CLK_AON,
.enable = enable_val(0x0, 9, 3, 15),
.mdiv = reg_val(0x8, 20, 8),
.enable = ENABLE_VAL(0x0, 9, 3, 15),
.mdiv = REG_VAL(0x8, 20, 8),
},
[BCM_CYGNUS_LCPLL0_USB_PHY_REF_CLK] = {
.channel = BCM_CYGNUS_LCPLL0_USB_PHY_REF_CLK,
.flags = IPROC_CLK_AON,
.enable = enable_val(0x0, 10, 4, 16),
.mdiv = reg_val(0xc, 0, 8),
.enable = ENABLE_VAL(0x0, 10, 4, 16),
.mdiv = REG_VAL(0xc, 0, 8),
},
[BCM_CYGNUS_LCPLL0_SMART_CARD_CLK] = {
.channel = BCM_CYGNUS_LCPLL0_SMART_CARD_CLK,
.flags = IPROC_CLK_AON,
.enable = enable_val(0x0, 11, 5, 17),
.mdiv = reg_val(0xc, 10, 8),
.enable = ENABLE_VAL(0x0, 11, 5, 17),
.mdiv = REG_VAL(0xc, 10, 8),
},
[BCM_CYGNUS_LCPLL0_CH5_UNUSED] = {
.channel = BCM_CYGNUS_LCPLL0_CH5_UNUSED,
.flags = IPROC_CLK_AON,
.enable = enable_val(0x0, 12, 6, 18),
.mdiv = reg_val(0xc, 20, 8),
.enable = ENABLE_VAL(0x0, 12, 6, 18),
.mdiv = REG_VAL(0xc, 20, 8),
},
};
@ -189,52 +193,53 @@ static const struct iproc_pll_vco_param mipipll_vco_params[] = {
static const struct iproc_pll_ctrl mipipll = {
.flags = IPROC_CLK_PLL_ASIU | IPROC_CLK_PLL_HAS_NDIV_FRAC |
IPROC_CLK_NEEDS_READ_BACK,
.aon = aon_val(0x0, 4, 17, 16),
.asiu = asiu_gate_val(0x0, 3),
.reset = reset_val(0x0, 11, 10, 4, 3, 0, 4, 7, 4),
.ndiv_int = reg_val(0x10, 20, 10),
.ndiv_frac = reg_val(0x10, 0, 20),
.pdiv = reg_val(0x14, 0, 4),
.vco_ctrl = vco_ctrl_val(0x18, 0x1c),
.status = reg_val(0x28, 12, 1),
.aon = AON_VAL(0x0, 4, 17, 16),
.asiu = ASIU_GATE_VAL(0x0, 3),
.reset = RESET_VAL(0x0, 11, 10),
.dig_filter = DF_VAL(0x0, 4, 3, 0, 4, 7, 4),
.ndiv_int = REG_VAL(0x10, 20, 10),
.ndiv_frac = REG_VAL(0x10, 0, 20),
.pdiv = REG_VAL(0x14, 0, 4),
.vco_ctrl = VCO_CTRL_VAL(0x18, 0x1c),
.status = REG_VAL(0x28, 12, 1),
};
static const struct iproc_clk_ctrl mipipll_clk[] = {
[BCM_CYGNUS_MIPIPLL_CH0_UNUSED] = {
.channel = BCM_CYGNUS_MIPIPLL_CH0_UNUSED,
.flags = IPROC_CLK_NEEDS_READ_BACK,
.enable = enable_val(0x4, 12, 6, 18),
.mdiv = reg_val(0x20, 0, 8),
.enable = ENABLE_VAL(0x4, 12, 6, 18),
.mdiv = REG_VAL(0x20, 0, 8),
},
[BCM_CYGNUS_MIPIPLL_CH1_LCD] = {
.channel = BCM_CYGNUS_MIPIPLL_CH1_LCD,
.flags = IPROC_CLK_NEEDS_READ_BACK,
.enable = enable_val(0x4, 13, 7, 19),
.mdiv = reg_val(0x20, 10, 8),
.enable = ENABLE_VAL(0x4, 13, 7, 19),
.mdiv = REG_VAL(0x20, 10, 8),
},
[BCM_CYGNUS_MIPIPLL_CH2_V3D] = {
.channel = BCM_CYGNUS_MIPIPLL_CH2_V3D,
.flags = IPROC_CLK_NEEDS_READ_BACK,
.enable = enable_val(0x4, 14, 8, 20),
.mdiv = reg_val(0x20, 20, 8),
.enable = ENABLE_VAL(0x4, 14, 8, 20),
.mdiv = REG_VAL(0x20, 20, 8),
},
[BCM_CYGNUS_MIPIPLL_CH3_UNUSED] = {
.channel = BCM_CYGNUS_MIPIPLL_CH3_UNUSED,
.flags = IPROC_CLK_NEEDS_READ_BACK,
.enable = enable_val(0x4, 15, 9, 21),
.mdiv = reg_val(0x24, 0, 8),
.enable = ENABLE_VAL(0x4, 15, 9, 21),
.mdiv = REG_VAL(0x24, 0, 8),
},
[BCM_CYGNUS_MIPIPLL_CH4_UNUSED] = {
.channel = BCM_CYGNUS_MIPIPLL_CH4_UNUSED,
.flags = IPROC_CLK_NEEDS_READ_BACK,
.enable = enable_val(0x4, 16, 10, 22),
.mdiv = reg_val(0x24, 10, 8),
.enable = ENABLE_VAL(0x4, 16, 10, 22),
.mdiv = REG_VAL(0x24, 10, 8),
},
[BCM_CYGNUS_MIPIPLL_CH5_UNUSED] = {
.channel = BCM_CYGNUS_MIPIPLL_CH5_UNUSED,
.flags = IPROC_CLK_NEEDS_READ_BACK,
.enable = enable_val(0x4, 17, 11, 23),
.mdiv = reg_val(0x24, 20, 8),
.enable = ENABLE_VAL(0x4, 17, 11, 23),
.mdiv = REG_VAL(0x24, 20, 8),
},
};
@ -247,15 +252,15 @@ static void __init cygnus_mipipll_clk_init(struct device_node *node)
CLK_OF_DECLARE(cygnus_mipipll, "brcm,cygnus-mipipll", cygnus_mipipll_clk_init);
static const struct iproc_asiu_div asiu_div[] = {
[BCM_CYGNUS_ASIU_KEYPAD_CLK] = asiu_div_val(0x0, 31, 16, 10, 0, 10),
[BCM_CYGNUS_ASIU_ADC_CLK] = asiu_div_val(0x4, 31, 16, 10, 0, 10),
[BCM_CYGNUS_ASIU_PWM_CLK] = asiu_div_val(0x8, 31, 16, 10, 0, 10),
[BCM_CYGNUS_ASIU_KEYPAD_CLK] = ASIU_DIV_VAL(0x0, 31, 16, 10, 0, 10),
[BCM_CYGNUS_ASIU_ADC_CLK] = ASIU_DIV_VAL(0x4, 31, 16, 10, 0, 10),
[BCM_CYGNUS_ASIU_PWM_CLK] = ASIU_DIV_VAL(0x8, 31, 16, 10, 0, 10),
};
static const struct iproc_asiu_gate asiu_gate[] = {
[BCM_CYGNUS_ASIU_KEYPAD_CLK] = asiu_gate_val(0x0, 7),
[BCM_CYGNUS_ASIU_ADC_CLK] = asiu_gate_val(0x0, 9),
[BCM_CYGNUS_ASIU_PWM_CLK] = asiu_gate_val(IPROC_CLK_INVALID_OFFSET, 0),
[BCM_CYGNUS_ASIU_KEYPAD_CLK] = ASIU_GATE_VAL(0x0, 7),
[BCM_CYGNUS_ASIU_ADC_CLK] = ASIU_GATE_VAL(0x0, 9),
[BCM_CYGNUS_ASIU_PWM_CLK] = ASIU_GATE_VAL(IPROC_CLK_INVALID_OFFSET, 0),
};
static void __init cygnus_asiu_init(struct device_node *node)

183
drivers/clk/bcm/clk-iproc-pll.c
View File

@ -74,7 +74,8 @@ struct iproc_clk {
};
struct iproc_pll {
void __iomem *pll_base;
void __iomem *status_base;
void __iomem *control_base;
void __iomem *pwr_base;
void __iomem *asiu_base;
@ -127,7 +128,7 @@ static int pll_wait_for_lock(struct iproc_pll *pll)
const struct iproc_pll_ctrl *ctrl = pll->ctrl;
for (i = 0; i < LOCK_DELAY; i++) {
u32 val = readl(pll->pll_base + ctrl->status.offset);
u32 val = readl(pll->status_base + ctrl->status.offset);
if (val & (1 << ctrl->status.shift))
return 0;
@ -137,6 +138,18 @@ static int pll_wait_for_lock(struct iproc_pll *pll)
return -EIO;
}
static void iproc_pll_write(const struct iproc_pll *pll, void __iomem *base,
const u32 offset, u32 val)
{
const struct iproc_pll_ctrl *ctrl = pll->ctrl;
writel(val, base + offset);
if (unlikely(ctrl->flags & IPROC_CLK_NEEDS_READ_BACK &&
(base == pll->status_base || base == pll->control_base)))
val = readl(base + offset);
}
static void __pll_disable(struct iproc_pll *pll)
{
const struct iproc_pll_ctrl *ctrl = pll->ctrl;
@ -145,17 +158,25 @@ static void __pll_disable(struct iproc_pll *pll)
if (ctrl->flags & IPROC_CLK_PLL_ASIU) {
val = readl(pll->asiu_base + ctrl->asiu.offset);
val &= ~(1 << ctrl->asiu.en_shift);
writel(val, pll->asiu_base + ctrl->asiu.offset);
iproc_pll_write(pll, pll->asiu_base, ctrl->asiu.offset, val);
}
/* latch input value so core power can be shut down */
val = readl(pll->pwr_base + ctrl->aon.offset);
val |= (1 << ctrl->aon.iso_shift);
writel(val, pll->pwr_base + ctrl->aon.offset);
if (ctrl->flags & IPROC_CLK_EMBED_PWRCTRL) {
val = readl(pll->control_base + ctrl->aon.offset);
val |= bit_mask(ctrl->aon.pwr_width) << ctrl->aon.pwr_shift;
iproc_pll_write(pll, pll->control_base, ctrl->aon.offset, val);
}
/* power down the core */
val &= ~(bit_mask(ctrl->aon.pwr_width) << ctrl->aon.pwr_shift);
writel(val, pll->pwr_base + ctrl->aon.offset);
if (pll->pwr_base) {
/* latch input value so core power can be shut down */
val = readl(pll->pwr_base + ctrl->aon.offset);
val |= 1 << ctrl->aon.iso_shift;
iproc_pll_write(pll, pll->pwr_base, ctrl->aon.offset, val);
/* power down the core */
val &= ~(bit_mask(ctrl->aon.pwr_width) << ctrl->aon.pwr_shift);
iproc_pll_write(pll, pll->pwr_base, ctrl->aon.offset, val);
}
}
static int __pll_enable(struct iproc_pll *pll)
@ -163,17 +184,25 @@ static int __pll_enable(struct iproc_pll *pll)
const struct iproc_pll_ctrl *ctrl = pll->ctrl;
u32 val;
/* power up the PLL and make sure it's not latched */
val = readl(pll->pwr_base + ctrl->aon.offset);
val |= bit_mask(ctrl->aon.pwr_width) << ctrl->aon.pwr_shift;
val &= ~(1 << ctrl->aon.iso_shift);
writel(val, pll->pwr_base + ctrl->aon.offset);
if (ctrl->flags & IPROC_CLK_EMBED_PWRCTRL) {
val = readl(pll->control_base + ctrl->aon.offset);
val &= ~(bit_mask(ctrl->aon.pwr_width) << ctrl->aon.pwr_shift);
iproc_pll_write(pll, pll->control_base, ctrl->aon.offset, val);
}
if (pll->pwr_base) {
/* power up the PLL and make sure it's not latched */
val = readl(pll->pwr_base + ctrl->aon.offset);
val |= bit_mask(ctrl->aon.pwr_width) << ctrl->aon.pwr_shift;
val &= ~(1 << ctrl->aon.iso_shift);
iproc_pll_write(pll, pll->pwr_base, ctrl->aon.offset, val);
}
/* certain PLLs also need to be ungated from the ASIU top level */
if (ctrl->flags & IPROC_CLK_PLL_ASIU) {
val = readl(pll->asiu_base + ctrl->asiu.offset);
val |= (1 << ctrl->asiu.en_shift);
writel(val, pll->asiu_base + ctrl->asiu.offset);
iproc_pll_write(pll, pll->asiu_base, ctrl->asiu.offset, val);
}
return 0;
@ -185,11 +214,9 @@ static void __pll_put_in_reset(struct iproc_pll *pll)
const struct iproc_pll_ctrl *ctrl = pll->ctrl;
const struct iproc_pll_reset_ctrl *reset = &ctrl->reset;
val = readl(pll->pll_base + reset->offset);
val = readl(pll->control_base + reset->offset);
val &= ~(1 << reset->reset_shift | 1 << reset->p_reset_shift);
writel(val, pll->pll_base + reset->offset);
if (unlikely(ctrl->flags & IPROC_CLK_NEEDS_READ_BACK))
readl(pll->pll_base + reset->offset);
iproc_pll_write(pll, pll->control_base, reset->offset, val);
}
static void __pll_bring_out_reset(struct iproc_pll *pll, unsigned int kp,
@ -198,17 +225,19 @@ static void __pll_bring_out_reset(struct iproc_pll *pll, unsigned int kp,
u32 val;
const struct iproc_pll_ctrl *ctrl = pll->ctrl;
const struct iproc_pll_reset_ctrl *reset = &ctrl->reset;
const struct iproc_pll_dig_filter_ctrl *dig_filter = &ctrl->dig_filter;
val = readl(pll->pll_base + reset->offset);
val &= ~(bit_mask(reset->ki_width) << reset->ki_shift |
bit_mask(reset->kp_width) << reset->kp_shift |
bit_mask(reset->ka_width) << reset->ka_shift);
val |= ki << reset->ki_shift | kp << reset->kp_shift |
ka << reset->ka_shift;
val = readl(pll->control_base + dig_filter->offset);
val &= ~(bit_mask(dig_filter->ki_width) << dig_filter->ki_shift |
bit_mask(dig_filter->kp_width) << dig_filter->kp_shift |
bit_mask(dig_filter->ka_width) << dig_filter->ka_shift);
val |= ki << dig_filter->ki_shift | kp << dig_filter->kp_shift |
ka << dig_filter->ka_shift;
iproc_pll_write(pll, pll->control_base, dig_filter->offset, val);
val = readl(pll->control_base + reset->offset);
val |= 1 << reset->reset_shift | 1 << reset->p_reset_shift;
writel(val, pll->pll_base + reset->offset);
if (unlikely(ctrl->flags & IPROC_CLK_NEEDS_READ_BACK))
readl(pll->pll_base + reset->offset);
iproc_pll_write(pll, pll->control_base, reset->offset, val);
}
static int pll_set_rate(struct iproc_clk *clk, unsigned int rate_index,
@ -263,10 +292,9 @@ static int pll_set_rate(struct iproc_clk *clk, unsigned int rate_index,
/* put PLL in reset */
__pll_put_in_reset(pll);
writel(0, pll->pll_base + ctrl->vco_ctrl.u_offset);
if (unlikely(ctrl->flags & IPROC_CLK_NEEDS_READ_BACK))
readl(pll->pll_base + ctrl->vco_ctrl.u_offset);
val = readl(pll->pll_base + ctrl->vco_ctrl.l_offset);
iproc_pll_write(pll, pll->control_base, ctrl->vco_ctrl.u_offset, 0);
val = readl(pll->control_base + ctrl->vco_ctrl.l_offset);
if (rate >= VCO_LOW && rate < VCO_MID)
val |= (1 << PLL_VCO_LOW_SHIFT);
@ -276,36 +304,29 @@ static int pll_set_rate(struct iproc_clk *clk, unsigned int rate_index,
else
val |= (1 << PLL_VCO_HIGH_SHIFT);
writel(val, pll->pll_base + ctrl->vco_ctrl.l_offset);
if (unlikely(ctrl->flags & IPROC_CLK_NEEDS_READ_BACK))
readl(pll->pll_base + ctrl->vco_ctrl.l_offset);
iproc_pll_write(pll, pll->control_base, ctrl->vco_ctrl.l_offset, val);
/* program integer part of NDIV */
val = readl(pll->pll_base + ctrl->ndiv_int.offset);
val = readl(pll->control_base + ctrl->ndiv_int.offset);
val &= ~(bit_mask(ctrl->ndiv_int.width) << ctrl->ndiv_int.shift);
val |= vco->ndiv_int << ctrl->ndiv_int.shift;
writel(val, pll->pll_base + ctrl->ndiv_int.offset);
if (unlikely(ctrl->flags & IPROC_CLK_NEEDS_READ_BACK))
readl(pll->pll_base + ctrl->ndiv_int.offset);
iproc_pll_write(pll, pll->control_base, ctrl->ndiv_int.offset, val);
/* program fractional part of NDIV */
if (ctrl->flags & IPROC_CLK_PLL_HAS_NDIV_FRAC) {
val = readl(pll->pll_base + ctrl->ndiv_frac.offset);
val = readl(pll->control_base + ctrl->ndiv_frac.offset);
val &= ~(bit_mask(ctrl->ndiv_frac.width) <<
ctrl->ndiv_frac.shift);
val |= vco->ndiv_frac << ctrl->ndiv_frac.shift;
writel(val, pll->pll_base + ctrl->ndiv_frac.offset);
if (unlikely(ctrl->flags & IPROC_CLK_NEEDS_READ_BACK))
readl(pll->pll_base + ctrl->ndiv_frac.offset);
iproc_pll_write(pll, pll->control_base, ctrl->ndiv_frac.offset,
val);
}
/* program PDIV */
val = readl(pll->pll_base + ctrl->pdiv.offset);
val = readl(pll->control_base + ctrl->pdiv.offset);
val &= ~(bit_mask(ctrl->pdiv.width) << ctrl->pdiv.shift);
val |= vco->pdiv << ctrl->pdiv.shift;
writel(val, pll->pll_base + ctrl->pdiv.offset);
if (unlikely(ctrl->flags & IPROC_CLK_NEEDS_READ_BACK))
readl(pll->pll_base + ctrl->pdiv.offset);
iproc_pll_write(pll, pll->control_base, ctrl->pdiv.offset, val);
__pll_bring_out_reset(pll, kp, ka, ki);
@ -352,7 +373,7 @@ static unsigned long iproc_pll_recalc_rate(struct clk_hw *hw,
return 0;
/* PLL needs to be locked */
val = readl(pll->pll_base + ctrl->status.offset);
val = readl(pll->status_base + ctrl->status.offset);
if ((val & (1 << ctrl->status.shift)) == 0) {
clk->rate = 0;
return 0;
@ -363,19 +384,19 @@ static unsigned long iproc_pll_recalc_rate(struct clk_hw *hw,
*
* ((ndiv_int + ndiv_frac / 2^20) * (parent clock rate / pdiv)
*/
val = readl(pll->pll_base + ctrl->ndiv_int.offset);
val = readl(pll->control_base + ctrl->ndiv_int.offset);
ndiv_int = (val >> ctrl->ndiv_int.shift) &
bit_mask(ctrl->ndiv_int.width);
ndiv = ndiv_int << 20;
if (ctrl->flags & IPROC_CLK_PLL_HAS_NDIV_FRAC) {
val = readl(pll->pll_base + ctrl->ndiv_frac.offset);
val = readl(pll->control_base + ctrl->ndiv_frac.offset);
ndiv_frac = (val >> ctrl->ndiv_frac.shift) &
bit_mask(ctrl->ndiv_frac.width);
ndiv += ndiv_frac;
}
val = readl(pll->pll_base + ctrl->pdiv.offset);
val = readl(pll->control_base + ctrl->pdiv.offset);
pdiv = (val >> ctrl->pdiv.shift) & bit_mask(ctrl->pdiv.width);
clk->rate = (ndiv * parent_rate) >> 20;
@ -440,16 +461,14 @@ static int iproc_clk_enable(struct clk_hw *hw)
u32 val;
/* channel enable is active low */
val = readl(pll->pll_base + ctrl->enable.offset);
val = readl(pll->control_base + ctrl->enable.offset);
val &= ~(1 << ctrl->enable.enable_shift);
writel(val, pll->pll_base + ctrl->enable.offset);
iproc_pll_write(pll, pll->control_base, ctrl->enable.offset, val);
/* also make sure channel is not held */
val = readl(pll->pll_base + ctrl->enable.offset);
val = readl(pll->control_base + ctrl->enable.offset);
val &= ~(1 << ctrl->enable.hold_shift);
writel(val, pll->pll_base + ctrl->enable.offset);
if (unlikely(ctrl->flags & IPROC_CLK_NEEDS_READ_BACK))
readl(pll->pll_base + ctrl->enable.offset);
iproc_pll_write(pll, pll->control_base, ctrl->enable.offset, val);
return 0;
}
@ -464,11 +483,9 @@ static void iproc_clk_disable(struct clk_hw *hw)
if (ctrl->flags & IPROC_CLK_AON)
return;
val = readl(pll->pll_base + ctrl->enable.offset);
val = readl(pll->control_base + ctrl->enable.offset);
val |= 1 << ctrl->enable.enable_shift;
writel(val, pll->pll_base + ctrl->enable.offset);
if (unlikely(ctrl->flags & IPROC_CLK_NEEDS_READ_BACK))
readl(pll->pll_base + ctrl->enable.offset);
iproc_pll_write(pll, pll->control_base, ctrl->enable.offset, val);
}
static unsigned long iproc_clk_recalc_rate(struct clk_hw *hw,
@ -483,7 +500,7 @@ static unsigned long iproc_clk_recalc_rate(struct clk_hw *hw,
if (parent_rate == 0)
return 0;
val = readl(pll->pll_base + ctrl->mdiv.offset);
val = readl(pll->control_base + ctrl->mdiv.offset);
mdiv = (val >> ctrl->mdiv.shift) & bit_mask(ctrl->mdiv.width);
if (mdiv == 0)
mdiv = 256;
@ -530,16 +547,14 @@ static int iproc_clk_set_rate(struct clk_hw *hw, unsigned long rate,
if (div > 256)
return -EINVAL;
val = readl(pll->pll_base + ctrl->mdiv.offset);
val = readl(pll->control_base + ctrl->mdiv.offset);
if (div == 256) {
val &= ~(bit_mask(ctrl->mdiv.width) << ctrl->mdiv.shift);
} else {
val &= ~(bit_mask(ctrl->mdiv.width) << ctrl->mdiv.shift);
val |= div << ctrl->mdiv.shift;
}
writel(val, pll->pll_base + ctrl->mdiv.offset);
if (unlikely(ctrl->flags & IPROC_CLK_NEEDS_READ_BACK))
readl(pll->pll_base + ctrl->mdiv.offset);
iproc_pll_write(pll, pll->control_base, ctrl->mdiv.offset, val);
clk->rate = parent_rate / div;
return 0;
@ -564,11 +579,10 @@ static void iproc_pll_sw_cfg(struct iproc_pll *pll)
if (ctrl->flags & IPROC_CLK_PLL_NEEDS_SW_CFG) {
u32 val;
val = readl(pll->pll_base + ctrl->sw_ctrl.offset);
val = readl(pll->control_base + ctrl->sw_ctrl.offset);
val |= BIT(ctrl->sw_ctrl.shift);
writel(val, pll->pll_base + ctrl->sw_ctrl.offset);
if (unlikely(ctrl->flags & IPROC_CLK_NEEDS_READ_BACK))
readl(pll->pll_base + ctrl->sw_ctrl.offset);
iproc_pll_write(pll, pll->control_base, ctrl->sw_ctrl.offset,
val);
}
}
@ -603,13 +617,12 @@ void __init iproc_pll_clk_setup(struct device_node *node,
if (WARN_ON(!pll->clks))
goto err_clks;
pll->pll_base = of_iomap(node, 0);
if (WARN_ON(!pll->pll_base))
pll->control_base = of_iomap(node, 0);
if (WARN_ON(!pll->control_base))
goto err_pll_iomap;
/* Some SoCs do not require the pwr_base, thus failing is not fatal */
pll->pwr_base = of_iomap(node, 1);
if (WARN_ON(!pll->pwr_base))
goto err_pwr_iomap;
/* some PLLs require gating control at the top ASIU level */
if (pll_ctrl->flags & IPROC_CLK_PLL_ASIU) {
@ -618,6 +631,16 @@ void __init iproc_pll_clk_setup(struct device_node *node,
goto err_asiu_iomap;
}
if (pll_ctrl->flags & IPROC_CLK_PLL_SPLIT_STAT_CTRL) {
/* Some SoCs have a split status/control. If this does not
* exist, assume they are unified.
*/
pll->status_base = of_iomap(node, 2);
if (!pll->status_base)
goto err_status_iomap;
} else
pll->status_base = pll->control_base;
/* initialize and register the PLL itself */
pll->ctrl = pll_ctrl;
@ -688,14 +711,18 @@ err_clk_register:
clk_unregister(pll->clk_data.clks[i]);
err_pll_register:
if (pll->status_base != pll->control_base)
iounmap(pll->status_base);
err_status_iomap:
if (pll->asiu_base)
iounmap(pll->asiu_base);
err_asiu_iomap:
iounmap(pll->pwr_base);
if (pll->pwr_base)
iounmap(pll->pwr_base);
err_pwr_iomap:
iounmap(pll->pll_base);
iounmap(pll->control_base);
err_pll_iomap:
kfree(pll->clks);

22
drivers/clk/bcm/clk-iproc.h
View File

@ -48,6 +48,18 @@
*/
#define IPROC_CLK_PLL_NEEDS_SW_CFG BIT(4)
/*
* Some PLLs use a different way to control clock power, via the PWRDWN bit in
* the PLL control register
*/
#define IPROC_CLK_EMBED_PWRCTRL BIT(5)
/*
* Some PLLs have separate registers for Status and Control. Identify this to
* let the driver know if additional registers need to be used
*/
#define IPROC_CLK_PLL_SPLIT_STAT_CTRL BIT(6)
/*
* Parameters for VCO frequency configuration
*
@ -88,12 +100,19 @@ struct iproc_pll_aon_pwr_ctrl {
};
/*
* Control of the PLL reset, with Ki, Kp, and Ka parameters
* Control of the PLL reset
*/
struct iproc_pll_reset_ctrl {
unsigned int offset;
unsigned int reset_shift;
unsigned int p_reset_shift;
};
/*
* Control of the Ki, Kp, and Ka parameters
*/
struct iproc_pll_dig_filter_ctrl {
unsigned int offset;
unsigned int ki_shift;
unsigned int ki_width;
unsigned int kp_shift;
@ -123,6 +142,7 @@ struct iproc_pll_ctrl {
struct iproc_pll_aon_pwr_ctrl aon;
struct iproc_asiu_gate asiu;
struct iproc_pll_reset_ctrl reset;
struct iproc_pll_dig_filter_ctrl dig_filter;
struct iproc_pll_sw_ctrl sw_ctrl;
struct iproc_clk_reg_op ndiv_int;
struct iproc_clk_reg_op ndiv_frac;

288
drivers/clk/bcm/clk-ns2.c Normal file
View File

@ -0,0 +1,288 @@
/*
* Copyright (C) 2015 Broadcom Corporation
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation version 2.
*
* This program is distributed "as is" WITHOUT ANY WARRANTY of any
* kind, whether express or implied; without even the implied warranty
* of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#include <linux/kernel.h>
#include <linux/err.h>
#include <linux/clk-provider.h>
#include <linux/io.h>
#include <linux/of.h>
#include <linux/of_address.h>
#include <dt-bindings/clock/bcm-ns2.h>
#include "clk-iproc.h"
#define REG_VAL(o, s, w) { .offset = o, .shift = s, .width = w, }
#define AON_VAL(o, pw, ps, is) { .offset = o, .pwr_width = pw, \
.pwr_shift = ps, .iso_shift = is }
#define RESET_VAL(o, rs, prs) { .offset = o, .reset_shift = rs, \
.p_reset_shift = prs }
#define DF_VAL(o, kis, kiw, kps, kpw, kas, kaw) { .offset = o, .ki_shift = kis,\
.ki_width = kiw, .kp_shift = kps, .kp_width = kpw, .ka_shift = kas, \
.ka_width = kaw }
#define VCO_CTRL_VAL(uo, lo) { .u_offset = uo, .l_offset = lo }
#define ENABLE_VAL(o, es, hs, bs) { .offset = o, .enable_shift = es, \
.hold_shift = hs, .bypass_shift = bs }
static const struct iproc_pll_ctrl genpll_scr = {
.flags = IPROC_CLK_AON | IPROC_CLK_PLL_SPLIT_STAT_CTRL,
.aon = AON_VAL(0x0, 1, 15, 12),
.reset = RESET_VAL(0x4, 2, 1),
.dig_filter = DF_VAL(0x0, 9, 3, 5, 4, 2, 3),
.ndiv_int = REG_VAL(0x8, 4, 10),
.pdiv = REG_VAL(0x8, 0, 4),
.vco_ctrl = VCO_CTRL_VAL(0x10, 0xc),
.status = REG_VAL(0x0, 27, 1),
};
static const struct iproc_clk_ctrl genpll_scr_clk[] = {
/* bypass_shift, the last value passed into ENABLE_VAL(), is not defined
* in NS2. However, it doesn't appear to be used anywhere, so setting
* it to 0.
*/
[BCM_NS2_GENPLL_SCR_SCR_CLK] = {
.channel = BCM_NS2_GENPLL_SCR_SCR_CLK,
.flags = IPROC_CLK_AON,
.enable = ENABLE_VAL(0x0, 18, 12, 0),
.mdiv = REG_VAL(0x18, 0, 8),
},
[BCM_NS2_GENPLL_SCR_FS_CLK] = {
.channel = BCM_NS2_GENPLL_SCR_FS_CLK,
.flags = IPROC_CLK_AON,
.enable = ENABLE_VAL(0x0, 19, 13, 0),
.mdiv = REG_VAL(0x18, 8, 8),
},
[BCM_NS2_GENPLL_SCR_AUDIO_CLK] = {
.channel = BCM_NS2_GENPLL_SCR_AUDIO_CLK,
.flags = IPROC_CLK_AON,
.enable = ENABLE_VAL(0x0, 20, 14, 0),
.mdiv = REG_VAL(0x14, 0, 8),
},
[BCM_NS2_GENPLL_SCR_CH3_UNUSED] = {
.channel = BCM_NS2_GENPLL_SCR_CH3_UNUSED,
.flags = IPROC_CLK_AON,
.enable = ENABLE_VAL(0x0, 21, 15, 0),
.mdiv = REG_VAL(0x14, 8, 8),
},
[BCM_NS2_GENPLL_SCR_CH4_UNUSED] = {
.channel = BCM_NS2_GENPLL_SCR_CH4_UNUSED,
.flags = IPROC_CLK_AON,
.enable = ENABLE_VAL(0x0, 22, 16, 0),
.mdiv = REG_VAL(0x14, 16, 8),
},
[BCM_NS2_GENPLL_SCR_CH5_UNUSED] = {
.channel = BCM_NS2_GENPLL_SCR_CH5_UNUSED,
.flags = IPROC_CLK_AON,
.enable = ENABLE_VAL(0x0, 23, 17, 0),
.mdiv = REG_VAL(0x14, 24, 8),
},
};
static void __init ns2_genpll_scr_clk_init(struct device_node *node)
{
iproc_pll_clk_setup(node, &genpll_scr, NULL, 0, genpll_scr_clk,
ARRAY_SIZE(genpll_scr_clk));
}
CLK_OF_DECLARE(ns2_genpll_src_clk, "brcm,ns2-genpll-scr",
ns2_genpll_scr_clk_init);
static const struct iproc_pll_ctrl genpll_sw = {
.flags = IPROC_CLK_AON | IPROC_CLK_PLL_SPLIT_STAT_CTRL,
.aon = AON_VAL(0x0, 2, 9, 8),
.reset = RESET_VAL(0x4, 2, 1),
.dig_filter = DF_VAL(0x0, 9, 3, 5, 4, 2, 3),
.ndiv_int = REG_VAL(0x8, 4, 10),
.pdiv = REG_VAL(0x8, 0, 4),
.vco_ctrl = VCO_CTRL_VAL(0x10, 0xc),
.status = REG_VAL(0x0, 13, 1),
};
static const struct iproc_clk_ctrl genpll_sw_clk[] = {
/* bypass_shift, the last value passed into ENABLE_VAL(), is not defined
* in NS2. However, it doesn't appear to be used anywhere, so setting
* it to 0.
*/
[BCM_NS2_GENPLL_SW_RPE_CLK] = {
.channel = BCM_NS2_GENPLL_SW_RPE_CLK,
.flags = IPROC_CLK_AON,
.enable = ENABLE_VAL(0x0, 18, 12, 0),
.mdiv = REG_VAL(0x18, 0, 8),
},
[BCM_NS2_GENPLL_SW_250_CLK] = {
.channel = BCM_NS2_GENPLL_SW_250_CLK,
.flags = IPROC_CLK_AON,
.enable = ENABLE_VAL(0x0, 19, 13, 0),
.mdiv = REG_VAL(0x18, 8, 8),
},
[BCM_NS2_GENPLL_SW_NIC_CLK] = {
.channel = BCM_NS2_GENPLL_SW_NIC_CLK,
.flags = IPROC_CLK_AON,
.enable = ENABLE_VAL(0x0, 20, 14, 0),
.mdiv = REG_VAL(0x14, 0, 8),
},
[BCM_NS2_GENPLL_SW_CHIMP_CLK] = {
.channel = BCM_NS2_GENPLL_SW_CHIMP_CLK,
.flags = IPROC_CLK_AON,
.enable = ENABLE_VAL(0x0, 21, 15, 0),
.mdiv = REG_VAL(0x14, 8, 8),
},
[BCM_NS2_GENPLL_SW_PORT_CLK] = {
.channel = BCM_NS2_GENPLL_SW_PORT_CLK,
.flags = IPROC_CLK_AON,
.enable = ENABLE_VAL(0x0, 22, 16, 0),
.mdiv = REG_VAL(0x14, 16, 8),
},
[BCM_NS2_GENPLL_SW_SDIO_CLK] = {
.channel = BCM_NS2_GENPLL_SW_SDIO_CLK,
.flags = IPROC_CLK_AON,
.enable = ENABLE_VAL(0x0, 23, 17, 0),
.mdiv = REG_VAL(0x14, 24, 8),
},
};
static void __init ns2_genpll_sw_clk_init(struct device_node *node)
{
iproc_pll_clk_setup(node, &genpll_sw, NULL, 0, genpll_sw_clk,
ARRAY_SIZE(genpll_sw_clk));
}
CLK_OF_DECLARE(ns2_genpll_sw_clk, "brcm,ns2-genpll-sw",
ns2_genpll_sw_clk_init);
static const struct iproc_pll_ctrl lcpll_ddr = {
.flags = IPROC_CLK_AON | IPROC_CLK_PLL_SPLIT_STAT_CTRL,
.aon = AON_VAL(0x0, 2, 1, 0),
.reset = RESET_VAL(0x4, 2, 1),
.dig_filter = DF_VAL(0x0, 9, 3, 5, 4, 1, 4),
.ndiv_int = REG_VAL(0x8, 4, 10),
.pdiv = REG_VAL(0x8, 0, 4),
.vco_ctrl = VCO_CTRL_VAL(0x10, 0xc),
.status = REG_VAL(0x0, 0, 1),
};
static const struct iproc_clk_ctrl lcpll_ddr_clk[] = {
/* bypass_shift, the last value passed into ENABLE_VAL(), is not defined
* in NS2. However, it doesn't appear to be used anywhere, so setting
* it to 0.
*/
[BCM_NS2_LCPLL_DDR_PCIE_SATA_USB_CLK] = {
.channel = BCM_NS2_LCPLL_DDR_PCIE_SATA_USB_CLK,
.flags = IPROC_CLK_AON,
.enable = ENABLE_VAL(0x0, 18, 12, 0),
.mdiv = REG_VAL(0x14, 0, 8),
},
[BCM_NS2_LCPLL_DDR_DDR_CLK] = {
.channel = BCM_NS2_LCPLL_DDR_DDR_CLK,
.flags = IPROC_CLK_AON,
.enable = ENABLE_VAL(0x0, 19, 13, 0),
.mdiv = REG_VAL(0x14, 8, 8),
},
[BCM_NS2_LCPLL_DDR_CH2_UNUSED] = {
.channel = BCM_NS2_LCPLL_DDR_CH2_UNUSED,
.flags = IPROC_CLK_AON,
.enable = ENABLE_VAL(0x0, 20, 14, 0),
.mdiv = REG_VAL(0x10, 0, 8),
},
[BCM_NS2_LCPLL_DDR_CH3_UNUSED] = {
.channel = BCM_NS2_LCPLL_DDR_CH3_UNUSED,
.flags = IPROC_CLK_AON,
.enable = ENABLE_VAL(0x0, 21, 15, 0),
.mdiv = REG_VAL(0x10, 8, 8),
},
[BCM_NS2_LCPLL_DDR_CH4_UNUSED] = {
.channel = BCM_NS2_LCPLL_DDR_CH4_UNUSED,
.flags = IPROC_CLK_AON,
.enable = ENABLE_VAL(0x0, 22, 16, 0),
.mdiv = REG_VAL(0x10, 16, 8),
},
[BCM_NS2_LCPLL_DDR_CH5_UNUSED] = {
.channel = BCM_NS2_LCPLL_DDR_CH5_UNUSED,
.flags = IPROC_CLK_AON,
.enable = ENABLE_VAL(0x0, 23, 17, 0),
.mdiv = REG_VAL(0x10, 24, 8),
},
};
static void __init ns2_lcpll_ddr_clk_init(struct device_node *node)
{
iproc_pll_clk_setup(node, &lcpll_ddr, NULL, 0, lcpll_ddr_clk,
ARRAY_SIZE(lcpll_ddr_clk));
}
CLK_OF_DECLARE(ns2_lcpll_ddr_clk, "brcm,ns2-lcpll-ddr",
ns2_lcpll_ddr_clk_init);
static const struct iproc_pll_ctrl lcpll_ports = {
.flags = IPROC_CLK_AON | IPROC_CLK_PLL_SPLIT_STAT_CTRL,
.aon = AON_VAL(0x0, 2, 5, 4),
.reset = RESET_VAL(0x4, 2, 1),
.dig_filter = DF_VAL(0x0, 9, 3, 5, 4, 1, 4),
.ndiv_int = REG_VAL(0x8, 4, 10),
.pdiv = REG_VAL(0x8, 0, 4),
.vco_ctrl = VCO_CTRL_VAL(0x10, 0xc),
.status = REG_VAL(0x0, 0, 1),
};
static const struct iproc_clk_ctrl lcpll_ports_clk[] = {
/* bypass_shift, the last value passed into ENABLE_VAL(), is not defined
* in NS2. However, it doesn't appear to be used anywhere, so setting
* it to 0.
*/
[BCM_NS2_LCPLL_PORTS_WAN_CLK] = {
.channel = BCM_NS2_LCPLL_PORTS_WAN_CLK,
.flags = IPROC_CLK_AON,
.enable = ENABLE_VAL(0x0, 18, 12, 0),
.mdiv = REG_VAL(0x14, 0, 8),
},
[BCM_NS2_LCPLL_PORTS_RGMII_CLK] = {
.channel = BCM_NS2_LCPLL_PORTS_RGMII_CLK,
.flags = IPROC_CLK_AON,
.enable = ENABLE_VAL(0x0, 19, 13, 0),
.mdiv = REG_VAL(0x14, 8, 8),
},
[BCM_NS2_LCPLL_PORTS_CH2_UNUSED] = {
.channel = BCM_NS2_LCPLL_PORTS_CH2_UNUSED,
.flags = IPROC_CLK_AON,
.enable = ENABLE_VAL(0x0, 20, 14, 0),
.mdiv = REG_VAL(0x10, 0, 8),
},
[BCM_NS2_LCPLL_PORTS_CH3_UNUSED] = {
.channel = BCM_NS2_LCPLL_PORTS_CH3_UNUSED,
.flags = IPROC_CLK_AON,
.enable = ENABLE_VAL(0x0, 21, 15, 0),
.mdiv = REG_VAL(0x10, 8, 8),
},
[BCM_NS2_LCPLL_PORTS_CH4_UNUSED] = {
.channel = BCM_NS2_LCPLL_PORTS_CH4_UNUSED,
.flags = IPROC_CLK_AON,
.enable = ENABLE_VAL(0x0, 22, 16, 0),
.mdiv = REG_VAL(0x10, 16, 8),
},
[BCM_NS2_LCPLL_PORTS_CH5_UNUSED] = {
.channel = BCM_NS2_LCPLL_PORTS_CH5_UNUSED,
.flags = IPROC_CLK_AON,
.enable = ENABLE_VAL(0x0, 23, 17, 0),
.mdiv = REG_VAL(0x10, 24, 8),
},
};
static void __init ns2_lcpll_ports_clk_init(struct device_node *node)
{
iproc_pll_clk_setup(node, &lcpll_ports, NULL, 0, lcpll_ports_clk,
ARRAY_SIZE(lcpll_ports_clk));
}
CLK_OF_DECLARE(ns2_lcpll_ports_clk, "brcm,ns2-lcpll-ports",
ns2_lcpll_ports_clk_init);

139
drivers/clk/bcm/clk-nsp.c Normal file
View File

@ -0,0 +1,139 @@
/*
* Copyright (C) 2015 Broadcom Corporation
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation version 2.
*
* This program is distributed "as is" WITHOUT ANY WARRANTY of any
* kind, whether express or implied; without even the implied warranty
* of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#include <linux/kernel.h>
#include <linux/err.h>
#include <linux/clk-provider.h>
#include <linux/io.h>
#include <linux/of.h>
#include <linux/of_address.h>
#include <dt-bindings/clock/bcm-nsp.h>
#include "clk-iproc.h"
#define REG_VAL(o, s, w) { .offset = o, .shift = s, .width = w, }
#define AON_VAL(o, pw, ps, is) { .offset = o, .pwr_width = pw, \
.pwr_shift = ps, .iso_shift = is }
#define RESET_VAL(o, rs, prs) { .offset = o, .reset_shift = rs, \
.p_reset_shift = prs }
#define DF_VAL(o, kis, kiw, kps, kpw, kas, kaw) { .offset = o, .ki_shift = kis,\
.ki_width = kiw, .kp_shift = kps, .kp_width = kpw, .ka_shift = kas, \
.ka_width = kaw }
#define ENABLE_VAL(o, es, hs, bs) { .offset = o, .enable_shift = es, \
.hold_shift = hs, .bypass_shift = bs }
static void __init nsp_armpll_init(struct device_node *node)
{
iproc_armpll_setup(node);
}
CLK_OF_DECLARE(nsp_armpll, "brcm,nsp-armpll", nsp_armpll_init);
static const struct iproc_pll_ctrl genpll = {
.flags = IPROC_CLK_PLL_HAS_NDIV_FRAC | IPROC_CLK_EMBED_PWRCTRL,
.aon = AON_VAL(0x0, 1, 12, 0),
.reset = RESET_VAL(0x0, 11, 10),
.dig_filter = DF_VAL(0x0, 4, 3, 0, 4, 7, 3),
.ndiv_int = REG_VAL(0x14, 20, 10),
.ndiv_frac = REG_VAL(0x14, 0, 20),
.pdiv = REG_VAL(0x18, 24, 3),
.status = REG_VAL(0x20, 12, 1),
};
static const struct iproc_clk_ctrl genpll_clk[] = {
[BCM_NSP_GENPLL_PHY_CLK] = {
.channel = BCM_NSP_GENPLL_PHY_CLK,
.flags = IPROC_CLK_AON,
.enable = ENABLE_VAL(0x4, 12, 6, 18),
.mdiv = REG_VAL(0x18, 16, 8),
},
[BCM_NSP_GENPLL_ENET_SW_CLK] = {
.channel = BCM_NSP_GENPLL_ENET_SW_CLK,
.flags = IPROC_CLK_AON,
.enable = ENABLE_VAL(0x4, 13, 7, 19),
.mdiv = REG_VAL(0x18, 8, 8),
},
[BCM_NSP_GENPLL_USB_PHY_REF_CLK] = {
.channel = BCM_NSP_GENPLL_USB_PHY_REF_CLK,
.flags = IPROC_CLK_AON,
.enable = ENABLE_VAL(0x4, 14, 8, 20),
.mdiv = REG_VAL(0x18, 0, 8),
},
[BCM_NSP_GENPLL_IPROCFAST_CLK] = {
.channel = BCM_NSP_GENPLL_IPROCFAST_CLK,
.flags = IPROC_CLK_AON,
.enable = ENABLE_VAL(0x4, 15, 9, 21),
.mdiv = REG_VAL(0x1c, 16, 8),
},
[BCM_NSP_GENPLL_SATA1_CLK] = {
.channel = BCM_NSP_GENPLL_SATA1_CLK,
.flags = IPROC_CLK_AON,
.enable = ENABLE_VAL(0x4, 16, 10, 22),
.mdiv = REG_VAL(0x1c, 8, 8),
},
[BCM_NSP_GENPLL_SATA2_CLK] = {
.channel = BCM_NSP_GENPLL_SATA2_CLK,
.flags = IPROC_CLK_AON,
.enable = ENABLE_VAL(0x4, 17, 11, 23),
.mdiv = REG_VAL(0x1c, 0, 8),
},
};
static void __init nsp_genpll_clk_init(struct device_node *node)
{
iproc_pll_clk_setup(node, &genpll, NULL, 0, genpll_clk,
ARRAY_SIZE(genpll_clk));
}
CLK_OF_DECLARE(nsp_genpll_clk, "brcm,nsp-genpll", nsp_genpll_clk_init);
static const struct iproc_pll_ctrl lcpll0 = {
.flags = IPROC_CLK_PLL_HAS_NDIV_FRAC | IPROC_CLK_EMBED_PWRCTRL,
.aon = AON_VAL(0x0, 1, 24, 0),
.reset = RESET_VAL(0x0, 23, 22),
.dig_filter = DF_VAL(0x0, 16, 3, 12, 4, 19, 4),
.ndiv_int = REG_VAL(0x4, 20, 8),
.ndiv_frac = REG_VAL(0x4, 0, 20),
.pdiv = REG_VAL(0x4, 28, 3),
.status = REG_VAL(0x10, 12, 1),
};
static const struct iproc_clk_ctrl lcpll0_clk[] = {
[BCM_NSP_LCPLL0_PCIE_PHY_REF_CLK] = {
.channel = BCM_NSP_LCPLL0_PCIE_PHY_REF_CLK,
.flags = IPROC_CLK_AON,
.enable = ENABLE_VAL(0x0, 6, 3, 9),
.mdiv = REG_VAL(0x8, 24, 8),
},
[BCM_NSP_LCPLL0_SDIO_CLK] = {
.channel = BCM_NSP_LCPLL0_SDIO_CLK,
.flags = IPROC_CLK_AON,
.enable = ENABLE_VAL(0x0, 7, 4, 10),
.mdiv = REG_VAL(0x8, 16, 8),
},
[BCM_NSP_LCPLL0_DDR_PHY_CLK] = {
.channel = BCM_NSP_LCPLL0_DDR_PHY_CLK,
.flags = IPROC_CLK_AON,
.enable = ENABLE_VAL(0x0, 8, 5, 11),
.mdiv = REG_VAL(0x8, 8, 8),
},
};
static void __init nsp_lcpll0_clk_init(struct device_node *node)
{
iproc_pll_clk_setup(node, &lcpll0, NULL, 0, lcpll0_clk,
ARRAY_SIZE(lcpll0_clk));
}
CLK_OF_DECLARE(nsp_lcpll0_clk, "brcm,nsp-lcpll0", nsp_lcpll0_clk_init);

72
include/dt-bindings/clock/bcm-ns2.h Normal file
View File

@ -0,0 +1,72 @@
/*
* BSD LICENSE
*
* Copyright(c) 2015 Broadcom Corporation. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* * Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* * Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* * Neither the name of Broadcom Corporation nor the names of its
* contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
* OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
#ifndef _CLOCK_BCM_NS2_H
#define _CLOCK_BCM_NS2_H
/* GENPLL SCR clock channel ID */
#define BCM_NS2_GENPLL_SCR 0
#define BCM_NS2_GENPLL_SCR_SCR_CLK 1
#define BCM_NS2_GENPLL_SCR_FS_CLK 2
#define BCM_NS2_GENPLL_SCR_AUDIO_CLK 3
#define BCM_NS2_GENPLL_SCR_CH3_UNUSED 4
#define BCM_NS2_GENPLL_SCR_CH4_UNUSED 5
#define BCM_NS2_GENPLL_SCR_CH5_UNUSED 6
/* GENPLL SW clock channel ID */
#define BCM_NS2_GENPLL_SW 0
#define BCM_NS2_GENPLL_SW_RPE_CLK 1
#define BCM_NS2_GENPLL_SW_250_CLK 2
#define BCM_NS2_GENPLL_SW_NIC_CLK 3
#define BCM_NS2_GENPLL_SW_CHIMP_CLK 4
#define BCM_NS2_GENPLL_SW_PORT_CLK 5
#define BCM_NS2_GENPLL_SW_SDIO_CLK 6
/* LCPLL DDR clock channel ID */
#define BCM_NS2_LCPLL_DDR 0
#define BCM_NS2_LCPLL_DDR_PCIE_SATA_USB_CLK 1
#define BCM_NS2_LCPLL_DDR_DDR_CLK 2
#define BCM_NS2_LCPLL_DDR_CH2_UNUSED 3
#define BCM_NS2_LCPLL_DDR_CH3_UNUSED 4
#define BCM_NS2_LCPLL_DDR_CH4_UNUSED 5
#define BCM_NS2_LCPLL_DDR_CH5_UNUSED 6
/* LCPLL PORTS clock channel ID */
#define BCM_NS2_LCPLL_PORTS 0
#define BCM_NS2_LCPLL_PORTS_WAN_CLK 1
#define BCM_NS2_LCPLL_PORTS_RGMII_CLK 2
#define BCM_NS2_LCPLL_PORTS_CH2_UNUSED 3
#define BCM_NS2_LCPLL_PORTS_CH3_UNUSED 4
#define BCM_NS2_LCPLL_PORTS_CH4_UNUSED 5
#define BCM_NS2_LCPLL_PORTS_CH5_UNUSED 6
#endif /* _CLOCK_BCM_NS2_H */

51
include/dt-bindings/clock/bcm-nsp.h Normal file
View File

@ -0,0 +1,51 @@
/*
* BSD LICENSE
*
* Copyright(c) 2015 Broadcom Corporation. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* * Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* * Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* * Neither the name of Broadcom Corporation nor the names of its
* contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
* OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
#ifndef _CLOCK_BCM_NSP_H
#define _CLOCK_BCM_NSP_H
/* GENPLL clock channel ID */
#define BCM_NSP_GENPLL 0
#define BCM_NSP_GENPLL_PHY_CLK 1
#define BCM_NSP_GENPLL_ENET_SW_CLK 2
#define BCM_NSP_GENPLL_USB_PHY_REF_CLK 3
#define BCM_NSP_GENPLL_IPROCFAST_CLK 4
#define BCM_NSP_GENPLL_SATA1_CLK 5
#define BCM_NSP_GENPLL_SATA2_CLK 6
/* LCPLL0 clock channel ID */
#define BCM_NSP_LCPLL0 0
#define BCM_NSP_LCPLL0_PCIE_PHY_REF_CLK 1
#define BCM_NSP_LCPLL0_SDIO_CLK 2
#define BCM_NSP_LCPLL0_DDR_PHY_CLK 3
#endif /* _CLOCK_BCM_NSP_H */