mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git
synced 2024-09-04 09:59:32 +00:00
First set of new device support, cleanups and features for IIO in the 5.9 cycle
Some new devices, but particularly good this time is the core rework coming from Alexandru. Some of this has been in Analog's tree a long time, but other parts are motivated by closing down common mistakes in new drivers. Changes since first try at this pull request: * Add missed patch to actually remove iio_priv_to_dev and as a result also drop a few ingenic patches that need to be updated to take this into account. * Fix an ordering issue int he pollfunc attach in the core rework. New device support * qcom pmic7 adc - New driver using common qcom-vadc library. Some associated cleanups and refactors. * invensense icm42600 - New driver supporting icm42600, icm42602, icm42605 and icm42622 via i2c or spi. These are all 6 axis IMUs with gyro and accelerometers. Driver supports buffered modes using the hardware fifo and interpolation for accurate timestamps. * sensirion scd30 - New driver for this carbon dioxide sensor including i2c and serial interfaces + bindings. Features * ak8975 - Add reset gpio support. * bma400 - Support SPI. * bmc150 - Document and add support for bmc156b and bmm150b, tidy up _magn endings. * bmi160 - Regulator and mount matrix support. * mxc4005 - Add ID for mxc6655 * rockchip-saradc - Triggered buffer support. DT bindings * qcom spmi-vadc converted to yaml + pmic7 bindings * ak8975 tidy up and convert to yaml + add reset-gpio binding * ingenic-adc -convert to yaml. Core rework all carried through by Alexandru Ardelean. * Assign parent device in the core rather than every driver. A few devices need to provide specific non standard parents, so there is support for overriding. * Start to take parts of struct iio_dev opaque to the drivers. This will be a long term job, but should reduce the number of drivers we get that use parts that are currently only 'internal' by documentation. * Move attach and detach of pollfunc to the core. Every triggered buffer using driver had to do the same thing, so lets do it in the core. The hard part here was getting all the drivers into canonical form so there would be no functional changes in this final patch. That's taken quite a lot of work over last couple of cycles! Cleanups and minor fixes. * docs - Improve IIO_CONCENTRATION channel type description in ABI docs. - Drop doubled word cases. - Http to Https conversion. * core - Make iio_device_get_drvdata take a const struct iio_dev * avoiding some nasty casts. * ADCs - Drop lots of users of of_match_ptr macro, includes of mod_devicetable.h and CONFIG_OF protections. These prevent use of ACPI PRP0001 with these drivers and get coppied into lots of new drivers. * ad5380 - Constify iio_chan_spec_ext_info * ad5592r - Constify iio_chan_spec_ext_info - Avoid use of iio_priv_to_dev (precursor to taking parts of iio_dev opaque) * ad8366 - Make gpio optional as doesn't matter if its there or not. * adis16480 - Use irq types instead of the flags. * atlas-ezo-sensor - Minimize scope of ret variable. * at91-adc - Add COMPILE_TEST dependency to driver to improve build coverage. - Avoid use of iio_priv_to_dev (precursor to taking parts of iio_dev opaque) * at91-sama5d2 - Avoid use of iio_priv_to_dev (precursor to taking parts of iio_dev opaque) - Drop Ludovic as a co-maintaienr. * cros_ec - Reapply the range after resume. - Add a read only frequency entry for legacy version. - Typo fixes * hts221 - Avoid use of iio_priv_to_dev (precursor to taking parts of iio_dev opaque) * inv_mpu - Drop double check on ACPI companion device. * iqs621 - Avoid use of iio_priv_to_dev (precursor to taking parts of iio_dev opaque) * iqs624 - Avoid use of iio_priv_to_dev (precursor to taking parts of iio_dev opaque) * max11100 - Constify iio_chan_spec * mmc35240 - Constify reg_default * rockchip-saradc - Move to managed allocators for everything in probe. - Use more distinctive prefix for channel macros. * stk3310 - Constify regmap_config. * stm32-adc - Avoid use of iio_priv_to_dev (precursor to taking parts of iio_dev opaque) * stm32-dfsdm-adc - Avoid use of iio_priv_to_dev (precursor to taking parts of iio_dev opaque) * ti-am335x - Use managed allocations where straight forward in probe function. * tsl2563 - Avoid use of iio_priv_to_dev (precursor to taking parts of iio_dev opaque) -----BEGIN PGP SIGNATURE----- iQJFBAABCAAvFiEEbilms4eEBlKRJoGxVIU0mcT0FogFAl8RWQMRHGppYzIzQGtl cm5lbC5vcmcACgkQVIU0mcT0Fog3jg//cMoA/XHNIbhpCCR0soQgculw+b8qmvGn GMSt2g6AZadRWmKAlzIVn34GJ2TmskA0ksawSLPLPNw0AhGvp+/XJ+UGc6JmF+Sf 5SHbL67e0y8GbGt8882B56ApeLKOVt8sMHIcMHG7xanwZFTw6uFv+OYdjxrG+HhX YQGyxvSEoXn4xRmjfdw5s/raGuJqfeqYP4PH4FMMoKC6UfLj4tDkLd4/n2C0iCl9 FcozwAT08zZXPYxfBMlG8q44hdSS3DDhVsfmvOlH1T1wN/zA/JqMV0h+qytOgtOV l1UBCpzpVuTRMJPRf4zHEamsvjo7uhUcr2P5xxGs3hFbXpZwvzWIKffkOwDo09QX 3z7pt6UxfGRc1yKLa3jCgSw6YTtAWBSqZgzEzJSBiM3Au2uUz/a0uD9CpZJAwpAz Mqd7JqSJmQ2jusrPRQxuYyofGDie1iWsdFx+87BxzoajXRha1Wy10a+t1ItQDWiv ayEWykptiA0XprJ2m2gYrziWptsgKgK3Z4qo9WaV5N6hyiOH00MPJ9U5RIfEHk0t cL5KAQv28FHDP9ZKAdMwB6Qjjsj1Xgbvej+XCG4BPtgSQg2/kec7DEqWy9+HVOnR kcoTSC9ON1+sN59G95w76mOjNYtz98DnRIgVlGsh3Tk2pApUJjSywl3cKtoih0WK 9XqtPrrDQfI= =LyRl -----END PGP SIGNATURE----- Merge tag 'iio-for-5.9a-take2' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next Jonathan writes: First set of new device support, cleanups and features for IIO in the 5.9 cycle Some new devices, but particularly good this time is the core rework coming from Alexandru. Some of this has been in Analog's tree a long time, but other parts are motivated by closing down common mistakes in new drivers. Changes since first try at this pull request: * Add missed patch to actually remove iio_priv_to_dev and as a result also drop a few ingenic patches that need to be updated to take this into account. * Fix an ordering issue int he pollfunc attach in the core rework. New device support * qcom pmic7 adc - New driver using common qcom-vadc library. Some associated cleanups and refactors. * invensense icm42600 - New driver supporting icm42600, icm42602, icm42605 and icm42622 via i2c or spi. These are all 6 axis IMUs with gyro and accelerometers. Driver supports buffered modes using the hardware fifo and interpolation for accurate timestamps. * sensirion scd30 - New driver for this carbon dioxide sensor including i2c and serial interfaces + bindings. Features * ak8975 - Add reset gpio support. * bma400 - Support SPI. * bmc150 - Document and add support for bmc156b and bmm150b, tidy up _magn endings. * bmi160 - Regulator and mount matrix support. * mxc4005 - Add ID for mxc6655 * rockchip-saradc - Triggered buffer support. DT bindings * qcom spmi-vadc converted to yaml + pmic7 bindings * ak8975 tidy up and convert to yaml + add reset-gpio binding * ingenic-adc -convert to yaml. Core rework all carried through by Alexandru Ardelean. * Assign parent device in the core rather than every driver. A few devices need to provide specific non standard parents, so there is support for overriding. * Start to take parts of struct iio_dev opaque to the drivers. This will be a long term job, but should reduce the number of drivers we get that use parts that are currently only 'internal' by documentation. * Move attach and detach of pollfunc to the core. Every triggered buffer using driver had to do the same thing, so lets do it in the core. The hard part here was getting all the drivers into canonical form so there would be no functional changes in this final patch. That's taken quite a lot of work over last couple of cycles! Cleanups and minor fixes. * docs - Improve IIO_CONCENTRATION channel type description in ABI docs. - Drop doubled word cases. - Http to Https conversion. * core - Make iio_device_get_drvdata take a const struct iio_dev * avoiding some nasty casts. * ADCs - Drop lots of users of of_match_ptr macro, includes of mod_devicetable.h and CONFIG_OF protections. These prevent use of ACPI PRP0001 with these drivers and get coppied into lots of new drivers. * ad5380 - Constify iio_chan_spec_ext_info * ad5592r - Constify iio_chan_spec_ext_info - Avoid use of iio_priv_to_dev (precursor to taking parts of iio_dev opaque) * ad8366 - Make gpio optional as doesn't matter if its there or not. * adis16480 - Use irq types instead of the flags. * atlas-ezo-sensor - Minimize scope of ret variable. * at91-adc - Add COMPILE_TEST dependency to driver to improve build coverage. - Avoid use of iio_priv_to_dev (precursor to taking parts of iio_dev opaque) * at91-sama5d2 - Avoid use of iio_priv_to_dev (precursor to taking parts of iio_dev opaque) - Drop Ludovic as a co-maintaienr. * cros_ec - Reapply the range after resume. - Add a read only frequency entry for legacy version. - Typo fixes * hts221 - Avoid use of iio_priv_to_dev (precursor to taking parts of iio_dev opaque) * inv_mpu - Drop double check on ACPI companion device. * iqs621 - Avoid use of iio_priv_to_dev (precursor to taking parts of iio_dev opaque) * iqs624 - Avoid use of iio_priv_to_dev (precursor to taking parts of iio_dev opaque) * max11100 - Constify iio_chan_spec * mmc35240 - Constify reg_default * rockchip-saradc - Move to managed allocators for everything in probe. - Use more distinctive prefix for channel macros. * stk3310 - Constify regmap_config. * stm32-adc - Avoid use of iio_priv_to_dev (precursor to taking parts of iio_dev opaque) * stm32-dfsdm-adc - Avoid use of iio_priv_to_dev (precursor to taking parts of iio_dev opaque) * ti-am335x - Use managed allocations where straight forward in probe function. * tsl2563 - Avoid use of iio_priv_to_dev (precursor to taking parts of iio_dev opaque) * tag 'iio-for-5.9a-take2' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (107 commits) iio: buffer: fix attach/detach pollfunc order iio: core: remove iio_priv_to_dev() helper Replace HTTP links with HTTPS ones: drivers/iio Replace HTTP links with HTTPS ones: Documentation/devicetree/bindings/iio dt-bindings: iio/adc: Convert ingenic-adc docs to YAML. iio: cros_ec_accel_legacy: Add Read Only frequency entries MAINTAINERS: adc: at91-sama5d2_adc: remove myself as co-maintainer iio: adc: ti_am335x_adc: alloc kfifo & IRQ via devm_ functions iio: adc: ti_am335x_adc: alloc channels via devm_kcalloc() iio:adc:ingenic: drop of_match_ptr protection and include mod_devicetable.h iio:adc:ti-tlc4541: Drop CONFIG_OF and of_match_ptr protections. iio:adc:ti-adc161s626: Drop of_match_ptr protection. iio:adc:ti-adc084s021: drop of_match_ptr protection iio:adc:ti-adc0832: drop CONFIG_OF and of_match_ptr protections iio:adc:ti-adc081c: Drop of_match_ptr and change to mod_devicetable.h iio:adc:sd_adc_modulator: Drop of_match_ptr and tweak includes iio:adc:mcp3422: remove CONFIG_OF and of_match_ptr protections iio:adc:mcp320x: Drop CONFIG_OF and of_match_ptr protections iio:adc:max1118: Drop CONFIG_OF / of_match_ptr protections iio:adc:max11100: Drop of_match_ptr protection / add mod_devicetable.h include ...
This commit is contained in:
commit
f6b35db072
429 changed files with 7973 additions and 1642 deletions
|
@ -1569,7 +1569,8 @@ What: /sys/bus/iio/devices/iio:deviceX/in_concentrationX_voc_raw
|
|||
KernelVersion: 4.3
|
||||
Contact: linux-iio@vger.kernel.org
|
||||
Description:
|
||||
Raw (unscaled no offset etc.) percentage reading of a substance.
|
||||
Raw (unscaled no offset etc.) reading of a substance. Units
|
||||
after application of scale and offset are percents.
|
||||
|
||||
What: /sys/bus/iio/devices/iio:deviceX/in_resistance_raw
|
||||
What: /sys/bus/iio/devices/iio:deviceX/in_resistanceX_raw
|
||||
|
|
20
Documentation/ABI/testing/sysfs-bus-iio-icm42600
Normal file
20
Documentation/ABI/testing/sysfs-bus-iio-icm42600
Normal file
|
@ -0,0 +1,20 @@
|
|||
What: /sys/bus/iio/devices/iio:deviceX/in_accel_x_calibbias
|
||||
What: /sys/bus/iio/devices/iio:deviceX/in_accel_y_calibbias
|
||||
What: /sys/bus/iio/devices/iio:deviceX/in_accel_z_calibbias
|
||||
What: /sys/bus/iio/devices/iio:deviceX/in_anglvel_x_calibbias
|
||||
What: /sys/bus/iio/devices/iio:deviceX/in_anglvel_y_calibbias
|
||||
What: /sys/bus/iio/devices/iio:deviceX/in_anglvel_z_calibbias
|
||||
KernelVersion: 5.8
|
||||
Contact: linux-iio@vger.kernel.org
|
||||
Description:
|
||||
Hardware applied calibration offset (assumed to fix production
|
||||
inaccuracies). Values represent a real physical offset expressed
|
||||
in SI units (m/s^2 for accelerometer and rad/s for gyroscope).
|
||||
|
||||
What: /sys/bus/iio/devices/iio:deviceX/in_accel_calibbias_available
|
||||
What: /sys/bus/iio/devices/iio:deviceX/in_anglvel_calibbias_available
|
||||
KernelVersion: 5.8
|
||||
Contact: linux-iio@vger.kernel.org
|
||||
Description:
|
||||
Range of available values for hardware offset. Values in SI
|
||||
units (m/s^2 for accelerometer and rad/s for gyroscope).
|
34
Documentation/ABI/testing/sysfs-bus-iio-scd30
Normal file
34
Documentation/ABI/testing/sysfs-bus-iio-scd30
Normal file
|
@ -0,0 +1,34 @@
|
|||
What: /sys/bus/iio/devices/iio:deviceX/calibration_auto_enable
|
||||
Date: June 2020
|
||||
KernelVersion: 5.8
|
||||
Contact: linux-iio@vger.kernel.org
|
||||
Description:
|
||||
Contaminants build-up in the measurement chamber or optical
|
||||
elements deterioration leads to sensor drift.
|
||||
|
||||
One can compensate for sensor drift by using automatic self
|
||||
calibration procedure (asc).
|
||||
|
||||
Writing 1 or 0 to this attribute will respectively activate or
|
||||
deactivate asc.
|
||||
|
||||
Upon reading current asc status is returned.
|
||||
|
||||
What: /sys/bus/iio/devices/iio:deviceX/calibration_forced_value
|
||||
Date: June 2020
|
||||
KernelVersion: 5.8
|
||||
Contact: linux-iio@vger.kernel.org
|
||||
Description:
|
||||
Contaminants build-up in the measurement chamber or optical
|
||||
elements deterioration leads to sensor drift.
|
||||
|
||||
One can compensate for sensor drift by using forced
|
||||
recalibration (frc). This is useful in case there's known
|
||||
co2 reference available nearby the sensor.
|
||||
|
||||
Picking value from the range [400 1 2000] and writing it to the
|
||||
sensor will set frc.
|
||||
|
||||
Upon reading current frc value is returned. Note that after
|
||||
power cycling default value (i.e 400) is returned even though
|
||||
internally sensor had recalibrated itself.
|
|
@ -12,8 +12,8 @@ maintainers:
|
|||
description: |
|
||||
Analog Devices ADXL345/ADXL375 3-Axis Digital Accelerometers that supports
|
||||
both I2C & SPI interfaces.
|
||||
http://www.analog.com/en/products/mems/accelerometers/adxl345.html
|
||||
http://www.analog.com/en/products/sensors-mems/accelerometers/adxl375.html
|
||||
https://www.analog.com/en/products/mems/accelerometers/adxl345.html
|
||||
https://www.analog.com/en/products/sensors-mems/accelerometers/adxl375.html
|
||||
|
||||
properties:
|
||||
compatible:
|
||||
|
|
|
@ -1,49 +0,0 @@
|
|||
* Ingenic JZ47xx ADC controller IIO bindings
|
||||
|
||||
Required properties:
|
||||
|
||||
- compatible: Should be one of:
|
||||
* ingenic,jz4725b-adc
|
||||
* ingenic,jz4740-adc
|
||||
* ingenic,jz4770-adc
|
||||
- reg: ADC controller registers location and length.
|
||||
- clocks: phandle to the SoC's ADC clock.
|
||||
- clock-names: Must be set to "adc".
|
||||
- #io-channel-cells: Must be set to <1> to indicate channels are selected
|
||||
by index.
|
||||
|
||||
ADC clients must use the format described in iio-bindings.txt, giving
|
||||
a phandle and IIO specifier pair ("io-channels") to the ADC controller.
|
||||
|
||||
Example:
|
||||
|
||||
#include <dt-bindings/iio/adc/ingenic,adc.h>
|
||||
|
||||
adc: adc@10070000 {
|
||||
compatible = "ingenic,jz4740-adc";
|
||||
#io-channel-cells = <1>;
|
||||
|
||||
reg = <0x10070000 0x30>;
|
||||
|
||||
clocks = <&cgu JZ4740_CLK_ADC>;
|
||||
clock-names = "adc";
|
||||
|
||||
interrupt-parent = <&intc>;
|
||||
interrupts = <18>;
|
||||
};
|
||||
|
||||
adc-keys {
|
||||
...
|
||||
compatible = "adc-keys";
|
||||
io-channels = <&adc INGENIC_ADC_AUX>;
|
||||
io-channel-names = "buttons";
|
||||
...
|
||||
};
|
||||
|
||||
battery {
|
||||
...
|
||||
compatible = "ingenic,jz4740-battery";
|
||||
io-channels = <&adc INGENIC_ADC_BATTERY>;
|
||||
io-channel-names = "battery";
|
||||
...
|
||||
};
|
71
Documentation/devicetree/bindings/iio/adc/ingenic,adc.yaml
Normal file
71
Documentation/devicetree/bindings/iio/adc/ingenic,adc.yaml
Normal file
|
@ -0,0 +1,71 @@
|
|||
# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
|
||||
# Copyright 2019-2020 Artur Rojek
|
||||
%YAML 1.2
|
||||
---
|
||||
$id: "http://devicetree.org/schemas/iio/adc/ingenic,adc.yaml#"
|
||||
$schema: "http://devicetree.org/meta-schemas/core.yaml#"
|
||||
|
||||
title: Ingenic JZ47xx ADC controller IIO bindings
|
||||
|
||||
maintainers:
|
||||
- Artur Rojek <contact@artur-rojek.eu>
|
||||
|
||||
description: >
|
||||
Industrial I/O subsystem bindings for ADC controller found in
|
||||
Ingenic JZ47xx SoCs.
|
||||
|
||||
ADC clients must use the format described in iio-bindings.txt, giving
|
||||
a phandle and IIO specifier pair ("io-channels") to the ADC controller.
|
||||
|
||||
properties:
|
||||
compatible:
|
||||
enum:
|
||||
- ingenic,jz4725b-adc
|
||||
- ingenic,jz4740-adc
|
||||
- ingenic,jz4770-adc
|
||||
|
||||
'#io-channel-cells':
|
||||
const: 1
|
||||
description:
|
||||
Must be set to <1> to indicate channels are selected by index.
|
||||
|
||||
reg:
|
||||
maxItems: 1
|
||||
|
||||
clocks:
|
||||
maxItems: 1
|
||||
|
||||
clock-names:
|
||||
items:
|
||||
- const: adc
|
||||
|
||||
interrupts:
|
||||
maxItems: 1
|
||||
|
||||
required:
|
||||
- compatible
|
||||
- '#io-channel-cells'
|
||||
- reg
|
||||
- clocks
|
||||
- clock-names
|
||||
- interrupts
|
||||
|
||||
additionalProperties: false
|
||||
|
||||
examples:
|
||||
- |
|
||||
#include <dt-bindings/clock/jz4740-cgu.h>
|
||||
#include <dt-bindings/iio/adc/ingenic,adc.h>
|
||||
|
||||
adc@10070000 {
|
||||
compatible = "ingenic,jz4740-adc";
|
||||
#io-channel-cells = <1>;
|
||||
|
||||
reg = <0x10070000 0x30>;
|
||||
|
||||
clocks = <&cgu JZ4740_CLK_ADC>;
|
||||
clock-names = "adc";
|
||||
|
||||
interrupt-parent = <&intc>;
|
||||
interrupts = <18>;
|
||||
};
|
|
@ -1,173 +0,0 @@
|
|||
Qualcomm's SPMI PMIC ADC
|
||||
|
||||
- SPMI PMIC voltage ADC (VADC) provides interface to clients to read
|
||||
voltage. The VADC is a 15-bit sigma-delta ADC.
|
||||
- SPMI PMIC5 voltage ADC (ADC) provides interface to clients to read
|
||||
voltage. The VADC is a 16-bit sigma-delta ADC.
|
||||
|
||||
VADC node:
|
||||
|
||||
- compatible:
|
||||
Usage: required
|
||||
Value type: <string>
|
||||
Definition: Should contain "qcom,spmi-vadc".
|
||||
Should contain "qcom,spmi-adc5" for PMIC5 ADC driver.
|
||||
Should contain "qcom,spmi-adc-rev2" for PMIC rev2 ADC driver.
|
||||
Should contain "qcom,pms405-adc" for PMS405 PMIC
|
||||
|
||||
- reg:
|
||||
Usage: required
|
||||
Value type: <prop-encoded-array>
|
||||
Definition: VADC base address in the SPMI PMIC register map.
|
||||
|
||||
- #address-cells:
|
||||
Usage: required
|
||||
Value type: <u32>
|
||||
Definition: Must be one. Child node 'reg' property should define ADC
|
||||
channel number.
|
||||
|
||||
- #size-cells:
|
||||
Usage: required
|
||||
Value type: <u32>
|
||||
Definition: Must be zero.
|
||||
|
||||
- #io-channel-cells:
|
||||
Usage: required
|
||||
Value type: <u32>
|
||||
Definition: Must be one. For details about IIO bindings see:
|
||||
Documentation/devicetree/bindings/iio/iio-bindings.txt
|
||||
|
||||
- interrupts:
|
||||
Usage: optional
|
||||
Value type: <prop-encoded-array>
|
||||
Definition: End of conversion interrupt.
|
||||
|
||||
Channel node properties:
|
||||
|
||||
- reg:
|
||||
Usage: required
|
||||
Value type: <u32>
|
||||
Definition: ADC channel number.
|
||||
See include/dt-bindings/iio/qcom,spmi-vadc.h
|
||||
|
||||
- label:
|
||||
Usage: required for "qcom,spmi-adc5" and "qcom,spmi-adc-rev2"
|
||||
Value type: <empty>
|
||||
Definition: ADC input of the platform as seen in the schematics.
|
||||
For thermistor inputs connected to generic AMUX or GPIO inputs
|
||||
these can vary across platform for the same pins. Hence select
|
||||
the platform schematics name for this channel.
|
||||
|
||||
- qcom,decimation:
|
||||
Usage: optional
|
||||
Value type: <u32>
|
||||
Definition: This parameter is used to decrease ADC sampling rate.
|
||||
Quicker measurements can be made by reducing decimation ratio.
|
||||
- For compatible property "qcom,spmi-vadc", valid values are
|
||||
512, 1024, 2048, 4096. If property is not found, default value
|
||||
of 512 will be used.
|
||||
- For compatible property "qcom,spmi-adc5", valid values are 250, 420
|
||||
and 840. If property is not found, default value of 840 is used.
|
||||
- For compatible property "qcom,spmi-adc-rev2", valid values are 256,
|
||||
512 and 1024. If property is not present, default value is 1024.
|
||||
|
||||
- qcom,pre-scaling:
|
||||
Usage: optional
|
||||
Value type: <u32 array>
|
||||
Definition: Used for scaling the channel input signal before the signal is
|
||||
fed to VADC. The configuration for this node is to know the
|
||||
pre-determined ratio and use it for post scaling. Select one from
|
||||
the following options.
|
||||
<1 1>, <1 3>, <1 4>, <1 6>, <1 20>, <1 8>, <10 81>, <1 10>
|
||||
If property is not found default value depending on chip will be used.
|
||||
|
||||
- qcom,ratiometric:
|
||||
Usage: optional
|
||||
Value type: <empty>
|
||||
Definition: Channel calibration type.
|
||||
- For compatible property "qcom,spmi-vadc", if this property is
|
||||
specified VADC will use the VDD reference (1.8V) and GND for
|
||||
channel calibration. If property is not found, channel will be
|
||||
calibrated with 0.625V and 1.25V reference channels, also
|
||||
known as absolute calibration.
|
||||
- For compatible property "qcom,spmi-adc5" and "qcom,spmi-adc-rev2",
|
||||
if this property is specified VADC will use the VDD reference
|
||||
(1.875V) and GND for channel calibration. If property is not found,
|
||||
channel will be calibrated with 0V and 1.25V reference channels,
|
||||
also known as absolute calibration.
|
||||
|
||||
- qcom,hw-settle-time:
|
||||
Usage: optional
|
||||
Value type: <u32>
|
||||
Definition: Time between AMUX getting configured and the ADC starting
|
||||
conversion. The 'hw_settle_time' is an index used from valid values
|
||||
and programmed in hardware to achieve the hardware settling delay.
|
||||
- For compatible property "qcom,spmi-vadc" and "qcom,spmi-adc-rev2",
|
||||
Delay = 100us * (hw_settle_time) for hw_settle_time < 11,
|
||||
and 2ms * (hw_settle_time - 10) otherwise.
|
||||
Valid values are: 0, 100, 200, 300, 400, 500, 600, 700, 800,
|
||||
900 us and 1, 2, 4, 6, 8, 10 ms.
|
||||
If property is not found, channel will use 0us.
|
||||
- For compatible property "qcom,spmi-adc5", delay = 15us for
|
||||
value 0, 100us * (value) for values < 11,
|
||||
and 2ms * (value - 10) otherwise.
|
||||
Valid values are: 15, 100, 200, 300, 400, 500, 600, 700, 800,
|
||||
900 us and 1, 2, 4, 6, 8, 10 ms
|
||||
Certain controller digital versions have valid values of
|
||||
15, 100, 200, 300, 400, 500, 600, 700, 1, 2, 4, 8, 16, 32, 64, 128 ms
|
||||
If property is not found, channel will use 15us.
|
||||
|
||||
- qcom,avg-samples:
|
||||
Usage: optional
|
||||
Value type: <u32>
|
||||
Definition: Number of samples to be used for measurement.
|
||||
Averaging provides the option to obtain a single measurement
|
||||
from the ADC that is an average of multiple samples. The value
|
||||
selected is 2^(value).
|
||||
- For compatible property "qcom,spmi-vadc", valid values
|
||||
are: 1, 2, 4, 8, 16, 32, 64, 128, 256, 512
|
||||
If property is not found, 1 sample will be used.
|
||||
- For compatible property "qcom,spmi-adc5" and "qcom,spmi-adc-rev2",
|
||||
valid values are: 1, 2, 4, 8, 16
|
||||
If property is not found, 1 sample will be used.
|
||||
|
||||
NOTE:
|
||||
|
||||
For compatible property "qcom,spmi-vadc" following channels, also known as
|
||||
reference point channels, are used for result calibration and their channel
|
||||
configuration nodes should be defined:
|
||||
VADC_REF_625MV and/or VADC_SPARE1(based on PMIC version) VADC_REF_1250MV,
|
||||
VADC_GND_REF and VADC_VDD_VADC.
|
||||
|
||||
Example:
|
||||
|
||||
#include <dt-bindings/iio/qcom,spmi-vadc.h>
|
||||
#include <linux/irq.h>
|
||||
/* ... */
|
||||
|
||||
/* VADC node */
|
||||
pmic_vadc: vadc@3100 {
|
||||
compatible = "qcom,spmi-vadc";
|
||||
reg = <0x3100>;
|
||||
interrupts = <0x0 0x31 0x0 IRQ_TYPE_EDGE_RISING>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
#io-channel-cells = <1>;
|
||||
io-channel-ranges;
|
||||
|
||||
/* Channel node */
|
||||
adc-chan@VADC_LR_MUX10_USB_ID {
|
||||
reg = <VADC_LR_MUX10_USB_ID>;
|
||||
qcom,decimation = <512>;
|
||||
qcom,ratiometric;
|
||||
qcom,hw-settle-time = <200>;
|
||||
qcom,avg-samples = <1>;
|
||||
qcom,pre-scaling = <1 3>;
|
||||
};
|
||||
};
|
||||
|
||||
/* IIO client node */
|
||||
usb {
|
||||
io-channels = <&pmic_vadc VADC_LR_MUX10_USB_ID>;
|
||||
io-channel-names = "vadc";
|
||||
};
|
278
Documentation/devicetree/bindings/iio/adc/qcom,spmi-vadc.yaml
Normal file
278
Documentation/devicetree/bindings/iio/adc/qcom,spmi-vadc.yaml
Normal file
|
@ -0,0 +1,278 @@
|
|||
# SPDX-License-Identifier: GPL-2.0-only
|
||||
%YAML 1.2
|
||||
---
|
||||
$id: http://devicetree.org/schemas/iio/adc/qcom,spmi-vadc.yaml#
|
||||
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
||||
|
||||
title: Qualcomm's SPMI PMIC ADC
|
||||
|
||||
maintainers:
|
||||
- Andy Gross <agross@kernel.org>
|
||||
- Bjorn Andersson <bjorn.andersson@linaro.org>
|
||||
|
||||
description: |
|
||||
SPMI PMIC voltage ADC (VADC) provides interface to clients to read
|
||||
voltage. The VADC is a 15-bit sigma-delta ADC.
|
||||
SPMI PMIC5/PMIC7 voltage ADC (ADC) provides interface to clients to read
|
||||
voltage. The VADC is a 16-bit sigma-delta ADC.
|
||||
|
||||
properties:
|
||||
compatible:
|
||||
oneOf:
|
||||
- items:
|
||||
- const: qcom,pms405-adc
|
||||
- const: qcom,spmi-adc-rev2
|
||||
|
||||
- items:
|
||||
- enum:
|
||||
- qcom,spmi-vadc
|
||||
- qcom,spmi-adc5
|
||||
- qcom,spmi-adc-rev2
|
||||
- qcom,spmi-adc7
|
||||
|
||||
reg:
|
||||
description: VADC base address in the SPMI PMIC register map
|
||||
maxItems: 1
|
||||
|
||||
'#address-cells':
|
||||
const: 1
|
||||
|
||||
'#size-cells':
|
||||
const: 0
|
||||
|
||||
'#io-channel-cells':
|
||||
const: 1
|
||||
|
||||
interrupts:
|
||||
maxItems: 1
|
||||
description:
|
||||
End of conversion interrupt.
|
||||
|
||||
required:
|
||||
- compatible
|
||||
- reg
|
||||
- '#address-cells'
|
||||
- '#size-cells'
|
||||
- '#io-channel-cells'
|
||||
|
||||
patternProperties:
|
||||
"^.*@[0-9a-f]+$":
|
||||
type: object
|
||||
description: |
|
||||
Represents the external channels which are connected to the ADC.
|
||||
For compatible property "qcom,spmi-vadc" following channels, also known as
|
||||
reference point channels, are used for result calibration and their channel
|
||||
configuration nodes should be defined:
|
||||
VADC_REF_625MV and/or VADC_SPARE1(based on PMIC version) VADC_REF_1250MV,
|
||||
VADC_GND_REF and VADC_VDD_VADC.
|
||||
|
||||
properties:
|
||||
reg:
|
||||
description: |
|
||||
ADC channel number.
|
||||
See include/dt-bindings/iio/qcom,spmi-vadc.h
|
||||
For PMIC7 ADC, the channel numbers are specified separately per PMIC
|
||||
in the PMIC-specific files in include/dt-bindings/iio/.
|
||||
|
||||
label:
|
||||
$ref: /schemas/types.yaml#/definitions/string
|
||||
description: |
|
||||
ADC input of the platform as seen in the schematics.
|
||||
For thermistor inputs connected to generic AMUX or GPIO inputs
|
||||
these can vary across platform for the same pins. Hence select
|
||||
the platform schematics name for this channel.
|
||||
|
||||
qcom,decimation:
|
||||
$ref: /schemas/types.yaml#/definitions/uint32
|
||||
description: |
|
||||
This parameter is used to decrease ADC sampling rate.
|
||||
Quicker measurements can be made by reducing decimation ratio.
|
||||
|
||||
qcom,pre-scaling:
|
||||
description: |
|
||||
Used for scaling the channel input signal before the signal is
|
||||
fed to VADC. The configuration for this node is to know the
|
||||
pre-determined ratio and use it for post scaling. It is a pair of
|
||||
integers, denoting the numerator and denominator of the fraction by which
|
||||
input signal is multiplied. For example, <1 3> indicates the signal is scaled
|
||||
down to 1/3 of its value before ADC measurement.
|
||||
If property is not found default value depending on chip will be used.
|
||||
allOf:
|
||||
- $ref: /schemas/types.yaml#/definitions/uint32-array
|
||||
oneOf:
|
||||
- items:
|
||||
- const: 1
|
||||
- enum: [ 1, 3, 4, 6, 20, 8, 10 ]
|
||||
|
||||
- items:
|
||||
- const: 10
|
||||
- const: 81
|
||||
|
||||
qcom,ratiometric:
|
||||
description: |
|
||||
Channel calibration type.
|
||||
- For compatible property "qcom,spmi-vadc", if this property is
|
||||
specified VADC will use the VDD reference (1.8V) and GND for
|
||||
channel calibration. If property is not found, channel will be
|
||||
calibrated with 0.625V and 1.25V reference channels, also
|
||||
known as absolute calibration.
|
||||
- For compatible property "qcom,spmi-adc5", "qcom,spmi-adc7" and
|
||||
"qcom,spmi-adc-rev2", if this property is specified VADC will use
|
||||
the VDD reference (1.875V) and GND for channel calibration. If
|
||||
property is not found, channel will be calibrated with 0V and 1.25V
|
||||
reference channels, also known as absolute calibration.
|
||||
type: boolean
|
||||
|
||||
qcom,hw-settle-time:
|
||||
$ref: /schemas/types.yaml#/definitions/uint32
|
||||
description: |
|
||||
Time between AMUX getting configured and the ADC starting
|
||||
conversion. The 'hw_settle_time' is an index used from valid values
|
||||
and programmed in hardware to achieve the hardware settling delay.
|
||||
|
||||
qcom,avg-samples:
|
||||
$ref: /schemas/types.yaml#/definitions/uint32
|
||||
description: |
|
||||
Number of samples to be used for measurement.
|
||||
Averaging provides the option to obtain a single measurement
|
||||
from the ADC that is an average of multiple samples. The value
|
||||
selected is 2^(value).
|
||||
|
||||
required:
|
||||
- reg
|
||||
|
||||
allOf:
|
||||
- if:
|
||||
properties:
|
||||
compatible:
|
||||
contains:
|
||||
const: qcom,spmi-vadc
|
||||
|
||||
then:
|
||||
patternProperties:
|
||||
"^.*@[0-9a-f]+$":
|
||||
properties:
|
||||
qcom,decimation:
|
||||
enum: [ 512, 1024, 2048, 4096 ]
|
||||
default: 512
|
||||
|
||||
qcom,hw-settle-time:
|
||||
enum: [ 0, 100, 200, 300, 400, 500, 600, 700, 800, 900, 1, 2,
|
||||
4, 6, 8, 10 ]
|
||||
default: 0
|
||||
|
||||
qcom,avg-samples:
|
||||
enum: [ 1, 2, 4, 8, 16, 32, 64, 128, 256, 512 ]
|
||||
default: 1
|
||||
|
||||
- if:
|
||||
properties:
|
||||
compatible:
|
||||
contains:
|
||||
const: qcom,spmi-adc-rev2
|
||||
|
||||
then:
|
||||
patternProperties:
|
||||
"^.*@[0-9a-f]+$":
|
||||
properties:
|
||||
qcom,decimation:
|
||||
enum: [ 256, 512, 1024 ]
|
||||
default: 1024
|
||||
|
||||
qcom,hw-settle-time:
|
||||
enum: [ 0, 100, 200, 300, 400, 500, 600, 700, 800, 900, 1, 2,
|
||||
4, 6, 8, 10 ]
|
||||
default: 0
|
||||
|
||||
qcom,avg-samples:
|
||||
enum: [ 1, 2, 4, 8, 16 ]
|
||||
default: 1
|
||||
|
||||
- if:
|
||||
properties:
|
||||
compatible:
|
||||
contains:
|
||||
const: qcom,spmi-adc5
|
||||
|
||||
then:
|
||||
patternProperties:
|
||||
"^.*@[0-9a-f]+$":
|
||||
properties:
|
||||
qcom,decimation:
|
||||
enum: [ 250, 420, 840 ]
|
||||
default: 840
|
||||
|
||||
qcom,hw-settle-time:
|
||||
enum: [ 15, 100, 200, 300, 400, 500, 600, 700, 800, 900, 1, 2,
|
||||
4, 6, 8, 10, 16, 32, 64, 128 ]
|
||||
default: 15
|
||||
|
||||
qcom,avg-samples:
|
||||
enum: [ 1, 2, 4, 8, 16 ]
|
||||
default: 1
|
||||
|
||||
- if:
|
||||
properties:
|
||||
compatible:
|
||||
contains:
|
||||
const: qcom,spmi-adc7
|
||||
|
||||
then:
|
||||
patternProperties:
|
||||
"^.*@[0-9a-f]+$":
|
||||
properties:
|
||||
qcom,decimation:
|
||||
enum: [ 85, 340, 1360 ]
|
||||
default: 1360
|
||||
|
||||
qcom,hw-settle-time:
|
||||
enum: [ 15, 100, 200, 300, 400, 500, 600, 700, 1000, 2000, 4000,
|
||||
8000, 16000, 32000, 64000, 128000 ]
|
||||
default: 15
|
||||
|
||||
qcom,avg-samples:
|
||||
enum: [ 1, 2, 4, 8, 16 ]
|
||||
default: 1
|
||||
|
||||
examples:
|
||||
- |
|
||||
spmi_bus {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
/* VADC node */
|
||||
pmic_vadc: adc@3100 {
|
||||
compatible = "qcom,spmi-vadc";
|
||||
reg = <0x3100>;
|
||||
interrupts = <0x0 0x31 0x0 0x1>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
#io-channel-cells = <1>;
|
||||
io-channel-ranges;
|
||||
|
||||
/* Channel node */
|
||||
adc-chan@39 {
|
||||
reg = <0x39>;
|
||||
qcom,decimation = <512>;
|
||||
qcom,ratiometric;
|
||||
qcom,hw-settle-time = <200>;
|
||||
qcom,avg-samples = <1>;
|
||||
qcom,pre-scaling = <1 3>;
|
||||
};
|
||||
|
||||
adc-chan@9 {
|
||||
reg = <0x9>;
|
||||
};
|
||||
|
||||
adc-chan@a {
|
||||
reg = <0xa>;
|
||||
};
|
||||
|
||||
adc-chan@e {
|
||||
reg = <0xe>;
|
||||
};
|
||||
|
||||
adc-chan@f {
|
||||
reg = <0xf>;
|
||||
};
|
||||
};
|
||||
};
|
|
@ -0,0 +1,68 @@
|
|||
# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
|
||||
%YAML 1.2
|
||||
---
|
||||
$id: http://devicetree.org/schemas/iio/chemical/sensirion,scd30.yaml#
|
||||
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
||||
|
||||
title: Sensirion SCD30 carbon dioxide sensor
|
||||
|
||||
maintainers:
|
||||
- Tomasz Duszynski <tomasz.duszynski@octakon.com>
|
||||
|
||||
description: |
|
||||
Air quality sensor capable of measuring co2 concentration, temperature
|
||||
and relative humidity.
|
||||
|
||||
properties:
|
||||
compatible:
|
||||
enum:
|
||||
- sensirion,scd30
|
||||
|
||||
reg:
|
||||
maxItems: 1
|
||||
|
||||
interrupts:
|
||||
maxItems: 1
|
||||
|
||||
vdd-supply: true
|
||||
|
||||
sensirion,sel-gpios:
|
||||
description: GPIO connected to the SEL line
|
||||
maxItems: 1
|
||||
|
||||
sensirion,pwm-gpios:
|
||||
description: GPIO connected to the PWM line
|
||||
maxItems: 1
|
||||
|
||||
required:
|
||||
- compatible
|
||||
|
||||
additionalProperties: false
|
||||
|
||||
examples:
|
||||
- |
|
||||
# include <dt-bindings/interrupt-controller/irq.h>
|
||||
i2c {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
co2-sensor@61 {
|
||||
compatible = "sensirion,scd30";
|
||||
reg = <0x61>;
|
||||
vdd-supply = <&vdd>;
|
||||
interrupt-parent = <&gpio0>;
|
||||
interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
|
||||
};
|
||||
};
|
||||
- |
|
||||
# include <dt-bindings/interrupt-controller/irq.h>
|
||||
serial {
|
||||
co2-sensor {
|
||||
compatible = "sensirion,scd30";
|
||||
vdd-supply = <&vdd>;
|
||||
interrupt-parent = <&gpio0>;
|
||||
interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
|
||||
};
|
||||
};
|
||||
|
||||
...
|
|
@ -6,7 +6,7 @@ Is is programmable through an SPI interface.
|
|||
|
||||
The internal DACs are loaded when the LOADDACS pin is pulled down.
|
||||
|
||||
http://www.ti.com/lit/ds/sbas106/sbas106.pdf
|
||||
https://www.ti.com/lit/ds/sbas106/sbas106.pdf
|
||||
|
||||
Required Properties:
|
||||
- compatible: Should be one of:
|
||||
|
|
|
@ -9,7 +9,7 @@ specifier is an array of one or more cells identifying the IIO
|
|||
output on a device. The length of an IIO specifier is defined by the
|
||||
value of a #io-channel-cells property in the IIO provider node.
|
||||
|
||||
[1] http://marc.info/?l=linux-iio&m=135902119507483&w=2
|
||||
[1] https://marc.info/?l=linux-iio&m=135902119507483&w=2
|
||||
|
||||
==IIO providers==
|
||||
|
||||
|
|
|
@ -37,6 +37,15 @@ properties:
|
|||
set if the specified interrupt pin should be configured as
|
||||
open drain. If not set, defaults to push-pull.
|
||||
|
||||
vdd-supply:
|
||||
description: provide VDD power to the sensor.
|
||||
|
||||
vddio-supply:
|
||||
description: provide VDD IO power to the sensor.
|
||||
|
||||
mount-matrix:
|
||||
description: an optional 3x3 mounting rotation matrix
|
||||
|
||||
required:
|
||||
- compatible
|
||||
- reg
|
||||
|
@ -52,9 +61,14 @@ examples:
|
|||
bmi160@68 {
|
||||
compatible = "bosch,bmi160";
|
||||
reg = <0x68>;
|
||||
vdd-supply = <&pm8916_l17>;
|
||||
vddio-supply = <&pm8916_l6>;
|
||||
interrupt-parent = <&gpio4>;
|
||||
interrupts = <12 IRQ_TYPE_EDGE_RISING>;
|
||||
interrupt-names = "INT1";
|
||||
mount-matrix = "0", "1", "0",
|
||||
"-1", "0", "0",
|
||||
"0", "0", "1";
|
||||
};
|
||||
};
|
||||
- |
|
||||
|
|
|
@ -0,0 +1,90 @@
|
|||
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
|
||||
%YAML 1.2
|
||||
---
|
||||
$id: http://devicetree.org/schemas/iio/imu/invensense,icm42600.yaml#
|
||||
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
||||
|
||||
title: InvenSense ICM-426xx Inertial Measurement Unit
|
||||
|
||||
maintainers:
|
||||
- Jean-Baptiste Maneyrol <jmaneyrol@invensense.com>
|
||||
|
||||
description: |
|
||||
6-axis MotionTracking device that combines a 3-axis gyroscope and a 3-axis
|
||||
accelerometer.
|
||||
|
||||
It has a configurable host interface that supports I3C, I2C and SPI serial
|
||||
communication, features a 2kB FIFO and 2 programmable interrupts with
|
||||
ultra-low-power wake-on-motion support to minimize system power consumption.
|
||||
|
||||
Other industry-leading features include InvenSense on-chip APEX Motion
|
||||
Processing engine for gesture recognition, activity classification, and
|
||||
pedometer, along with programmable digital filters, and an embedded
|
||||
temperature sensor.
|
||||
|
||||
https://invensense.tdk.com/wp-content/uploads/2020/03/DS-000292-ICM-42605-v1.4.pdf
|
||||
|
||||
properties:
|
||||
compatible:
|
||||
enum:
|
||||
- invensense,icm42600
|
||||
- invensense,icm42602
|
||||
- invensense,icm42605
|
||||
- invensense,icm42622
|
||||
|
||||
reg:
|
||||
maxItems: 1
|
||||
|
||||
interrupts:
|
||||
maxItems: 1
|
||||
|
||||
drive-open-drain:
|
||||
type: boolean
|
||||
|
||||
vdd-supply:
|
||||
description: Regulator that provides power to the sensor
|
||||
|
||||
vddio-supply:
|
||||
description: Regulator that provides power to the bus
|
||||
|
||||
required:
|
||||
- compatible
|
||||
- reg
|
||||
- interrupts
|
||||
|
||||
examples:
|
||||
- |
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/interrupt-controller/irq.h>
|
||||
i2c0 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
icm42605@68 {
|
||||
compatible = "invensense,icm42605";
|
||||
reg = <0x68>;
|
||||
interrupt-parent = <&gpio2>;
|
||||
interrupts = <7 IRQ_TYPE_EDGE_FALLING>;
|
||||
vdd-supply = <&vdd>;
|
||||
vddio-supply = <&vddio>;
|
||||
};
|
||||
};
|
||||
- |
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/interrupt-controller/irq.h>
|
||||
spi0 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
icm42602@0 {
|
||||
compatible = "invensense,icm42602";
|
||||
reg = <0>;
|
||||
spi-max-frequency = <24000000>;
|
||||
spi-cpha;
|
||||
spi-cpol;
|
||||
interrupt-parent = <&gpio1>;
|
||||
interrupts = <2 IRQ_TYPE_EDGE_FALLING>;
|
||||
vdd-supply = <&vdd>;
|
||||
vddio-supply = <&vddio>;
|
||||
};
|
||||
};
|
|
@ -1,6 +1,6 @@
|
|||
* Avago APDS9300 ambient light sensor
|
||||
|
||||
http://www.avagotech.com/docs/AV02-1077EN
|
||||
https://www.avagotech.com/docs/AV02-1077EN
|
||||
|
||||
Required properties:
|
||||
|
||||
|
|
|
@ -1,6 +1,6 @@
|
|||
* Avago APDS9960 gesture/RGB/ALS/proximity sensor
|
||||
|
||||
http://www.avagotech.com/docs/AV02-4191EN
|
||||
https://www.avagotech.com/docs/AV02-4191EN
|
||||
|
||||
Required properties:
|
||||
|
||||
|
|
|
@ -6,7 +6,7 @@ the optional generation of IIO events on rising/falling light threshold changes
|
|||
requires the use of interrupts. Without interrupts, only the simple reading
|
||||
of the current light value is supported through the IIO API.
|
||||
|
||||
http://www.ti.com/product/opt3001
|
||||
https://www.ti.com/product/opt3001
|
||||
|
||||
Required properties:
|
||||
- compatible: should be "ti,opt3001"
|
||||
|
|
|
@ -1,6 +1,6 @@
|
|||
STMicro VL6180 - ALS, range and proximity sensor
|
||||
|
||||
Link to datasheet: http://www.st.com/resource/en/datasheet/vl6180x.pdf
|
||||
Link to datasheet: https://www.st.com/resource/en/datasheet/vl6180x.pdf
|
||||
|
||||
Required properties:
|
||||
|
||||
|
|
|
@ -1,30 +0,0 @@
|
|||
* AsahiKASEI AK8975 magnetometer sensor
|
||||
|
||||
Required properties:
|
||||
|
||||
- compatible : should be "asahi-kasei,ak8975"
|
||||
- reg : the I2C address of the magnetometer
|
||||
|
||||
Optional properties:
|
||||
|
||||
- gpios : should be device tree identifier of the magnetometer DRDY pin
|
||||
- vdd-supply: an optional regulator that needs to be on to provide VDD
|
||||
- mount-matrix: an optional 3x3 mounting rotation matrix
|
||||
|
||||
Example:
|
||||
|
||||
ak8975@c {
|
||||
compatible = "asahi-kasei,ak8975";
|
||||
reg = <0x0c>;
|
||||
gpios = <&gpj0 7 0>;
|
||||
vdd-supply = <&ldo_3v3_gnss>;
|
||||
mount-matrix = "-0.984807753012208", /* x0 */
|
||||
"0", /* y0 */
|
||||
"-0.173648177666930", /* z0 */
|
||||
"0", /* x1 */
|
||||
"-1", /* y1 */
|
||||
"0", /* z1 */
|
||||
"-0.173648177666930", /* x2 */
|
||||
"0", /* y2 */
|
||||
"0.984807753012208"; /* z2 */
|
||||
};
|
|
@ -0,0 +1,83 @@
|
|||
# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
|
||||
%YAML 1.2
|
||||
---
|
||||
$id: http://devicetree.org/schemas/iio/magnetometer/asahi-kasei,ak8975.yaml#
|
||||
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
||||
|
||||
title: AsahiKASEI AK8975 magnetometer sensor
|
||||
|
||||
maintainers:
|
||||
- Jonathan Albrieux <jonathan.albrieux@gmail.com>
|
||||
|
||||
properties:
|
||||
compatible:
|
||||
oneOf:
|
||||
- enum:
|
||||
- asahi-kasei,ak8975
|
||||
- asahi-kasei,ak8963
|
||||
- asahi-kasei,ak09911
|
||||
- asahi-kasei,ak09912
|
||||
- enum:
|
||||
- ak8975
|
||||
- ak8963
|
||||
- ak09911
|
||||
- ak09912
|
||||
deprecated: true
|
||||
|
||||
reg:
|
||||
maxItems: 1
|
||||
|
||||
gpios:
|
||||
maxItems: 1
|
||||
description: |
|
||||
AK8975 has a "Data ready" pin (DRDY) which informs that data
|
||||
is ready to be read and is possible to listen on it. If used,
|
||||
this should be active high. Prefer interrupt over this.
|
||||
|
||||
interrupts:
|
||||
maxItems: 1
|
||||
description: interrupt for DRDY pin. Triggered on rising edge.
|
||||
|
||||
vdd-supply:
|
||||
description: |
|
||||
an optional regulator that needs to be on to provide VDD power to
|
||||
the sensor.
|
||||
|
||||
mount-matrix:
|
||||
description: an optional 3x3 mounting rotation matrix.
|
||||
|
||||
reset-gpios:
|
||||
description: |
|
||||
an optional pin needed for AK09911 to set the reset state. This should
|
||||
be usually active low
|
||||
|
||||
required:
|
||||
- compatible
|
||||
- reg
|
||||
|
||||
examples:
|
||||
- |
|
||||
#include <dt-bindings/interrupt-controller/irq.h>
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
i2c {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
magnetometer@c {
|
||||
compatible = "asahi-kasei,ak8975";
|
||||
reg = <0x0c>;
|
||||
interrupt-parent = <&gpio6>;
|
||||
interrupts = <15 IRQ_TYPE_EDGE_RISING>;
|
||||
vdd-supply = <&ldo_3v3_gnss>;
|
||||
reset-gpios = <&msmgpio 111 GPIO_ACTIVE_LOW>;
|
||||
mount-matrix = "-0.984807753012208", /* x0 */
|
||||
"0", /* y0 */
|
||||
"-0.173648177666930", /* z0 */
|
||||
"0", /* x1 */
|
||||
"-1", /* y1 */
|
||||
"0", /* z1 */
|
||||
"-0.173648177666930", /* x2 */
|
||||
"0", /* y2 */
|
||||
"0.984807753012208"; /* z2 */
|
||||
};
|
||||
};
|
|
@ -4,7 +4,11 @@ http://ae-bst.resource.bosch.com/media/products/dokumente/bmc150/BST-BMC150-DS00
|
|||
|
||||
Required properties:
|
||||
|
||||
- compatible : should be "bosch,bmc150_magn"
|
||||
- compatible : should be one of:
|
||||
"bosch,bmc150_magn"
|
||||
"bosch,bmc156_magn"
|
||||
"bosch,bmm150"
|
||||
"bosch,bmm150_magn" (DEPRECATED, use bosch,bmm150)
|
||||
- reg : the I2C address of the magnetometer
|
||||
|
||||
Optional properties:
|
||||
|
|
|
@ -1,7 +1,7 @@
|
|||
* Microchip MCP41010/41050/41100/42010/42050/42100 Digital Potentiometer
|
||||
|
||||
Datasheet publicly available at:
|
||||
http://ww1.microchip.com/downloads/en/devicedoc/11195c.pdf
|
||||
https://ww1.microchip.com/downloads/en/devicedoc/11195c.pdf
|
||||
|
||||
The node for this driver must be a child node of a SPI controller, hence
|
||||
all mandatory properties described in
|
||||
|
|
|
@ -1,7 +1,7 @@
|
|||
* Texas Instruments LMP91000 series of potentiostats
|
||||
|
||||
LMP91000: http://www.ti.com/lit/ds/symlink/lmp91000.pdf
|
||||
LMP91002: http://www.ti.com/lit/ds/symlink/lmp91002.pdf
|
||||
LMP91000: https://www.ti.com/lit/ds/symlink/lmp91000.pdf
|
||||
LMP91002: https://www.ti.com/lit/ds/symlink/lmp91002.pdf
|
||||
|
||||
Required properties:
|
||||
|
||||
|
|
|
@ -13,7 +13,7 @@ description: |
|
|||
Bindings for the All Sensors DLH series pressure sensors.
|
||||
|
||||
Specifications about the sensors can be found at:
|
||||
http://www.allsensors.com/cad/DS-0355_Rev_B.PDF
|
||||
https://www.allsensors.com/cad/DS-0355_Rev_B.PDF
|
||||
|
||||
properties:
|
||||
compatible:
|
||||
|
|
|
@ -17,9 +17,9 @@ description: |
|
|||
until it is received once again
|
||||
|
||||
Specifications about the devices can be found at:
|
||||
http://www.robot-electronics.co.uk/htm/srf04tech.htm
|
||||
https://www.robot-electronics.co.uk/htm/srf04tech.htm
|
||||
|
||||
http://www.maxbotix.com/documents/LV-MaxSonar-EZ_Datasheet.pdf
|
||||
https://www.maxbotix.com/documents/LV-MaxSonar-EZ_Datasheet.pdf
|
||||
|
||||
properties:
|
||||
compatible:
|
||||
|
|
|
@ -262,7 +262,7 @@ the system.
|
|||
Counter Counts may be allocated via counter_count structures, and
|
||||
respective Counter Signal associations (Synapses) made via
|
||||
counter_synapse structures. Associated counter_synapse structures are
|
||||
stored as an array and set to the the synapses array member of the
|
||||
stored as an array and set to the synapses array member of the
|
||||
respective counter_count structure. These counter_count structures are
|
||||
set to the counts array member of an allocated counter_device structure
|
||||
before the Counter is registered to the system.
|
||||
|
|
|
@ -88,7 +88,7 @@ fields in iio_chan_spec definition::
|
|||
The driver implementing the accelerometer described above will have the
|
||||
following channel definition::
|
||||
|
||||
struct struct iio_chan_spec accel_channels[] = {
|
||||
struct iio_chan_spec accel_channels[] = {
|
||||
{
|
||||
.type = IIO_ACCEL,
|
||||
.modified = 1,
|
||||
|
|
18
MAINTAINERS
18
MAINTAINERS
|
@ -8979,6 +8979,14 @@ F: include/dt-bindings/interconnect/
|
|||
F: include/linux/interconnect-provider.h
|
||||
F: include/linux/interconnect.h
|
||||
|
||||
INVENSENSE ICM-426xx IMU DRIVER
|
||||
M: Jean-Baptiste Maneyrol <jmaneyrol@invensense.com>
|
||||
L: linux-iio@vger.kernel.org
|
||||
S: Maintained
|
||||
W https://invensense.tdk.com/
|
||||
F: Documentation/devicetree/bindings/iio/imu/invensense,icm42600.yaml
|
||||
F: drivers/iio/imu/inv_icm42600/
|
||||
|
||||
INVENSENSE MPU-3050 GYROSCOPE DRIVER
|
||||
M: Linus Walleij <linus.walleij@linaro.org>
|
||||
L: linux-iio@vger.kernel.org
|
||||
|
@ -11324,7 +11332,6 @@ F: Documentation/devicetree/bindings/pwm/atmel-pwm.txt
|
|||
F: drivers/pwm/pwm-atmel.c
|
||||
|
||||
MICROCHIP SAMA5D2-COMPATIBLE ADC DRIVER
|
||||
M: Ludovic Desroches <ludovic.desroches@microchip.com>
|
||||
M: Eugen Hristev <eugen.hristev@microchip.com>
|
||||
L: linux-iio@vger.kernel.org
|
||||
S: Supported
|
||||
|
@ -15373,6 +15380,15 @@ S: Maintained
|
|||
F: drivers/misc/phantom.c
|
||||
F: include/uapi/linux/phantom.h
|
||||
|
||||
SENSIRION SCD30 CARBON DIOXIDE SENSOR DRIVER
|
||||
M: Tomasz Duszynski <tomasz.duszynski@octakon.com>
|
||||
S: Maintained
|
||||
F: Documentation/devicetree/bindings/iio/chemical/sensirion,scd30.yaml
|
||||
F: drivers/iio/chemical/scd30.h
|
||||
F: drivers/iio/chemical/scd30_core.c
|
||||
F: drivers/iio/chemical/scd30_i2c.c
|
||||
F: drivers/iio/chemical/scd30_serial.c
|
||||
|
||||
SENSIRION SPS30 AIR POLLUTION SENSOR DRIVER
|
||||
M: Tomasz Duszynski <tduszyns@gmail.com>
|
||||
S: Maintained
|
||||
|
|
|
@ -1538,7 +1538,6 @@ static int quad8_probe(struct device *dev, unsigned int id)
|
|||
indio_dev->num_channels = ARRAY_SIZE(quad8_channels);
|
||||
indio_dev->channels = quad8_channels;
|
||||
indio_dev->name = dev_name(dev);
|
||||
indio_dev->dev.parent = dev;
|
||||
|
||||
/* Initialize Counter device and driver data */
|
||||
quad8iio = iio_priv(indio_dev);
|
||||
|
|
|
@ -648,7 +648,6 @@ static int stm32_lptim_cnt_probe(struct platform_device *pdev)
|
|||
|
||||
/* Initialize IIO device */
|
||||
indio_dev->name = dev_name(&pdev->dev);
|
||||
indio_dev->dev.parent = &pdev->dev;
|
||||
indio_dev->dev.of_node = pdev->dev.of_node;
|
||||
indio_dev->info = &stm32_lptim_cnt_iio_info;
|
||||
if (ddata->has_encoder)
|
||||
|
|
|
@ -116,18 +116,24 @@ config BMA400
|
|||
tristate "Bosch BMA400 3-Axis Accelerometer Driver"
|
||||
select REGMAP
|
||||
select BMA400_I2C if I2C
|
||||
select BMA400_SPI if SPI
|
||||
help
|
||||
Say Y here if you want to build a driver for the Bosch BMA400
|
||||
triaxial acceleration sensor.
|
||||
|
||||
To compile this driver as a module, choose M here: the
|
||||
module will be called bma400_core and you will also get
|
||||
bma400_i2c if I2C is enabled.
|
||||
bma400_i2c if I2C is enabled and bma400_spi if SPI is
|
||||
enabled.
|
||||
|
||||
config BMA400_I2C
|
||||
tristate
|
||||
depends on BMA400
|
||||
|
||||
config BMA400_SPI
|
||||
tristate
|
||||
depends on BMA400
|
||||
|
||||
config BMC150_ACCEL
|
||||
tristate "Bosch BMC150 Accelerometer Driver"
|
||||
select IIO_BUFFER
|
||||
|
|
|
@ -16,6 +16,7 @@ obj-$(CONFIG_BMA180) += bma180.o
|
|||
obj-$(CONFIG_BMA220) += bma220_spi.o
|
||||
obj-$(CONFIG_BMA400) += bma400_core.o
|
||||
obj-$(CONFIG_BMA400_I2C) += bma400_i2c.o
|
||||
obj-$(CONFIG_BMA400_SPI) += bma400_spi.o
|
||||
obj-$(CONFIG_BMC150_ACCEL) += bmc150-accel-core.o
|
||||
obj-$(CONFIG_BMC150_ACCEL_I2C) += bmc150-accel-i2c.o
|
||||
obj-$(CONFIG_BMC150_ACCEL_SPI) += bmc150-accel-spi.o
|
||||
|
|
|
@ -271,7 +271,6 @@ static int adis16201_probe(struct spi_device *spi)
|
|||
spi_set_drvdata(spi, indio_dev);
|
||||
|
||||
indio_dev->name = spi->dev.driver->name;
|
||||
indio_dev->dev.parent = &spi->dev;
|
||||
indio_dev->info = &adis16201_info;
|
||||
|
||||
indio_dev->channels = adis16201_channels;
|
||||
|
|
|
@ -282,7 +282,6 @@ static int adis16209_probe(struct spi_device *spi)
|
|||
spi_set_drvdata(spi, indio_dev);
|
||||
|
||||
indio_dev->name = spi->dev.driver->name;
|
||||
indio_dev->dev.parent = &spi->dev;
|
||||
indio_dev->info = &adis16209_info;
|
||||
indio_dev->channels = adis16209_channels;
|
||||
indio_dev->num_channels = ARRAY_SIZE(adis16209_channels);
|
||||
|
|
|
@ -4,7 +4,7 @@
|
|||
*
|
||||
* Copyright (c) 2017 Eva Rachel Retuya <eraretuya@gmail.com>
|
||||
*
|
||||
* Datasheet: http://www.analog.com/media/en/technical-documentation/data-sheets/ADXL345.pdf
|
||||
* Datasheet: https://www.analog.com/media/en/technical-documentation/data-sheets/ADXL345.pdf
|
||||
*/
|
||||
|
||||
#include <linux/module.h>
|
||||
|
@ -246,7 +246,6 @@ int adxl345_core_probe(struct device *dev, struct regmap *regmap,
|
|||
return ret;
|
||||
}
|
||||
|
||||
indio_dev->dev.parent = dev;
|
||||
indio_dev->name = name;
|
||||
indio_dev->info = &adxl345_info;
|
||||
indio_dev->modes = INDIO_DIRECT_MODE;
|
||||
|
|
|
@ -795,13 +795,9 @@ static int adxl372_buffer_postenable(struct iio_dev *indio_dev)
|
|||
unsigned int mask;
|
||||
int i, ret;
|
||||
|
||||
ret = iio_triggered_buffer_postenable(indio_dev);
|
||||
if (ret < 0)
|
||||
return ret;
|
||||
|
||||
ret = adxl372_set_interrupts(st, ADXL372_INT1_MAP_FIFO_FULL_MSK, 0);
|
||||
if (ret < 0)
|
||||
goto err;
|
||||
return ret;
|
||||
|
||||
mask = *indio_dev->active_scan_mask;
|
||||
|
||||
|
@ -810,10 +806,8 @@ static int adxl372_buffer_postenable(struct iio_dev *indio_dev)
|
|||
break;
|
||||
}
|
||||
|
||||
if (i == ARRAY_SIZE(adxl372_axis_lookup_table)) {
|
||||
ret = -EINVAL;
|
||||
goto err;
|
||||
}
|
||||
if (i == ARRAY_SIZE(adxl372_axis_lookup_table))
|
||||
return -EINVAL;
|
||||
|
||||
st->fifo_format = adxl372_axis_lookup_table[i].fifo_format;
|
||||
st->fifo_set_size = bitmap_weight(indio_dev->active_scan_mask,
|
||||
|
@ -833,14 +827,10 @@ static int adxl372_buffer_postenable(struct iio_dev *indio_dev)
|
|||
if (ret < 0) {
|
||||
st->fifo_mode = ADXL372_FIFO_BYPASSED;
|
||||
adxl372_set_interrupts(st, 0, 0);
|
||||
goto err;
|
||||
return ret;
|
||||
}
|
||||
|
||||
return 0;
|
||||
|
||||
err:
|
||||
iio_triggered_buffer_predisable(indio_dev);
|
||||
return ret;
|
||||
}
|
||||
|
||||
static int adxl372_buffer_predisable(struct iio_dev *indio_dev)
|
||||
|
@ -851,7 +841,7 @@ static int adxl372_buffer_predisable(struct iio_dev *indio_dev)
|
|||
st->fifo_mode = ADXL372_FIFO_BYPASSED;
|
||||
adxl372_configure_fifo(st);
|
||||
|
||||
return iio_triggered_buffer_predisable(indio_dev);
|
||||
return 0;
|
||||
}
|
||||
|
||||
static const struct iio_buffer_setup_ops adxl372_buffer_ops = {
|
||||
|
@ -938,7 +928,6 @@ int adxl372_probe(struct device *dev, struct regmap *regmap,
|
|||
indio_dev->channels = adxl372_channels;
|
||||
indio_dev->num_channels = ARRAY_SIZE(adxl372_channels);
|
||||
indio_dev->available_scan_masks = adxl372_channel_masks;
|
||||
indio_dev->dev.parent = dev;
|
||||
indio_dev->name = name;
|
||||
indio_dev->info = &adxl372_info;
|
||||
indio_dev->modes = INDIO_DIRECT_MODE | INDIO_BUFFER_SOFTWARE;
|
||||
|
|
|
@ -1038,7 +1038,6 @@ static int bma180_probe(struct i2c_client *client,
|
|||
goto err_chip_disable;
|
||||
|
||||
mutex_init(&data->mutex);
|
||||
indio_dev->dev.parent = dev;
|
||||
indio_dev->channels = data->part_info->channels;
|
||||
indio_dev->num_channels = data->part_info->num_channels;
|
||||
indio_dev->name = id->name;
|
||||
|
|
|
@ -237,7 +237,6 @@ static int bma220_probe(struct spi_device *spi)
|
|||
spi_set_drvdata(spi, indio_dev);
|
||||
mutex_init(&data->lock);
|
||||
|
||||
indio_dev->dev.parent = &spi->dev;
|
||||
indio_dev->info = &bma220_info;
|
||||
indio_dev->name = BMA220_DEVICE_NAME;
|
||||
indio_dev->modes = INDIO_DIRECT_MODE;
|
||||
|
|
|
@ -816,7 +816,6 @@ int bma400_probe(struct device *dev, struct regmap *regmap, const char *name)
|
|||
return ret;
|
||||
|
||||
mutex_init(&data->mutex);
|
||||
indio_dev->dev.parent = dev;
|
||||
indio_dev->name = name;
|
||||
indio_dev->info = &bma400_info;
|
||||
indio_dev->channels = bma400_channels;
|
||||
|
|
120
drivers/iio/accel/bma400_spi.c
Normal file
120
drivers/iio/accel/bma400_spi.c
Normal file
|
@ -0,0 +1,120 @@
|
|||
// SPDX-License-Identifier: GPL-2.0-only
|
||||
/*
|
||||
* SPI IIO driver for Bosch BMA400 triaxial acceleration sensor.
|
||||
*
|
||||
* Copyright 2020 Dan Robertson <dan@dlrobertson.com>
|
||||
*
|
||||
*/
|
||||
#include <linux/bits.h>
|
||||
#include <linux/init.h>
|
||||
#include <linux/mod_devicetable.h>
|
||||
#include <linux/module.h>
|
||||
#include <linux/regmap.h>
|
||||
#include <linux/spi/spi.h>
|
||||
|
||||
#include "bma400.h"
|
||||
|
||||
#define BMA400_MAX_SPI_READ 2
|
||||
#define BMA400_SPI_READ_BUFFER_SIZE (BMA400_MAX_SPI_READ + 1)
|
||||
|
||||
static int bma400_regmap_spi_read(void *context,
|
||||
const void *reg, size_t reg_size,
|
||||
void *val, size_t val_size)
|
||||
{
|
||||
struct device *dev = context;
|
||||
struct spi_device *spi = to_spi_device(dev);
|
||||
u8 result[BMA400_SPI_READ_BUFFER_SIZE];
|
||||
ssize_t status;
|
||||
|
||||
if (val_size > BMA400_MAX_SPI_READ)
|
||||
return -EINVAL;
|
||||
|
||||
status = spi_write_then_read(spi, reg, 1, result, val_size + 1);
|
||||
if (status)
|
||||
return status;
|
||||
|
||||
/*
|
||||
* From the BMA400 datasheet:
|
||||
*
|
||||
* > For a basic read operation two bytes have to be read and the first
|
||||
* > has to be dropped and the second byte must be interpreted.
|
||||
*/
|
||||
memcpy(val, result + 1, val_size);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int bma400_regmap_spi_write(void *context, const void *data,
|
||||
size_t count)
|
||||
{
|
||||
struct device *dev = context;
|
||||
struct spi_device *spi = to_spi_device(dev);
|
||||
|
||||
return spi_write(spi, data, count);
|
||||
}
|
||||
|
||||
static struct regmap_bus bma400_regmap_bus = {
|
||||
.read = bma400_regmap_spi_read,
|
||||
.write = bma400_regmap_spi_write,
|
||||
.read_flag_mask = BIT(7),
|
||||
.max_raw_read = BMA400_MAX_SPI_READ,
|
||||
};
|
||||
|
||||
static int bma400_spi_probe(struct spi_device *spi)
|
||||
{
|
||||
const struct spi_device_id *id = spi_get_device_id(spi);
|
||||
struct regmap *regmap;
|
||||
unsigned int val;
|
||||
int ret;
|
||||
|
||||
regmap = devm_regmap_init(&spi->dev, &bma400_regmap_bus,
|
||||
&spi->dev, &bma400_regmap_config);
|
||||
if (IS_ERR(regmap)) {
|
||||
dev_err(&spi->dev, "failed to create regmap\n");
|
||||
return PTR_ERR(regmap);
|
||||
}
|
||||
|
||||
/*
|
||||
* Per the bma400 datasheet, the first SPI read may
|
||||
* return garbage. As the datasheet recommends, the
|
||||
* chip ID register will be read here and checked
|
||||
* again in the following probe.
|
||||
*/
|
||||
ret = regmap_read(regmap, BMA400_CHIP_ID_REG, &val);
|
||||
if (ret)
|
||||
dev_err(&spi->dev, "Failed to read chip id register\n");
|
||||
|
||||
return bma400_probe(&spi->dev, regmap, id->name);
|
||||
}
|
||||
|
||||
static int bma400_spi_remove(struct spi_device *spi)
|
||||
{
|
||||
return bma400_remove(&spi->dev);
|
||||
}
|
||||
|
||||
static const struct spi_device_id bma400_spi_ids[] = {
|
||||
{ "bma400", 0 },
|
||||
{ }
|
||||
};
|
||||
MODULE_DEVICE_TABLE(spi, bma400_spi_ids);
|
||||
|
||||
static const struct of_device_id bma400_of_spi_match[] = {
|
||||
{ .compatible = "bosch,bma400" },
|
||||
{ }
|
||||
};
|
||||
MODULE_DEVICE_TABLE(of, bma400_of_spi_match);
|
||||
|
||||
static struct spi_driver bma400_spi_driver = {
|
||||
.driver = {
|
||||
.name = "bma400",
|
||||
.of_match_table = bma400_of_spi_match,
|
||||
},
|
||||
.probe = bma400_spi_probe,
|
||||
.remove = bma400_spi_remove,
|
||||
.id_table = bma400_spi_ids,
|
||||
};
|
||||
|
||||
module_spi_driver(bma400_spi_driver);
|
||||
MODULE_AUTHOR("Dan Robertson <dan@dlrobertson.com>");
|
||||
MODULE_DESCRIPTION("Bosch BMA400 triaxial acceleration sensor (SPI)");
|
||||
MODULE_LICENSE("GPL");
|
|
@ -1411,7 +1411,7 @@ static int bmc150_accel_buffer_postenable(struct iio_dev *indio_dev)
|
|||
int ret = 0;
|
||||
|
||||
if (indio_dev->currentmode == INDIO_BUFFER_TRIGGERED)
|
||||
return iio_triggered_buffer_postenable(indio_dev);
|
||||
return 0;
|
||||
|
||||
mutex_lock(&data->mutex);
|
||||
|
||||
|
@ -1443,7 +1443,7 @@ static int bmc150_accel_buffer_predisable(struct iio_dev *indio_dev)
|
|||
struct bmc150_accel_data *data = iio_priv(indio_dev);
|
||||
|
||||
if (indio_dev->currentmode == INDIO_BUFFER_TRIGGERED)
|
||||
return iio_triggered_buffer_predisable(indio_dev);
|
||||
return 0;
|
||||
|
||||
mutex_lock(&data->mutex);
|
||||
|
||||
|
@ -1574,7 +1574,6 @@ int bmc150_accel_core_probe(struct device *dev, struct regmap *regmap, int irq,
|
|||
|
||||
mutex_init(&data->mutex);
|
||||
|
||||
indio_dev->dev.parent = dev;
|
||||
indio_dev->channels = data->chip_info->channels;
|
||||
indio_dev->num_channels = data->chip_info->num_channels;
|
||||
indio_dev->name = name ? name : data->chip_info->name;
|
||||
|
|
|
@ -33,6 +33,11 @@
|
|||
*/
|
||||
#define ACCEL_LEGACY_NSCALE 9586168
|
||||
|
||||
/*
|
||||
* Sensor frequency is hard-coded to 10Hz.
|
||||
*/
|
||||
static const int cros_ec_legacy_sample_freq[] = { 10, 0 };
|
||||
|
||||
static int cros_ec_accel_legacy_read_cmd(struct iio_dev *indio_dev,
|
||||
unsigned long scan_mask, s16 *data)
|
||||
{
|
||||
|
@ -96,6 +101,11 @@ static int cros_ec_accel_legacy_read(struct iio_dev *indio_dev,
|
|||
*val = 0;
|
||||
ret = IIO_VAL_INT;
|
||||
break;
|
||||
case IIO_CHAN_INFO_SAMP_FREQ:
|
||||
*val = cros_ec_legacy_sample_freq[0];
|
||||
*val2 = cros_ec_legacy_sample_freq[1];
|
||||
ret = IIO_VAL_INT_PLUS_MICRO;
|
||||
break;
|
||||
default:
|
||||
ret = cros_ec_sensors_core_read(st, chan, val, val2,
|
||||
mask);
|
||||
|
@ -120,9 +130,39 @@ static int cros_ec_accel_legacy_write(struct iio_dev *indio_dev,
|
|||
return -EINVAL;
|
||||
}
|
||||
|
||||
/**
|
||||
* cros_ec_accel_legacy_read_avail() - get available values
|
||||
* @indio_dev: pointer to state information for device
|
||||
* @chan: channel specification structure table
|
||||
* @vals: list of available values
|
||||
* @type: type of data returned
|
||||
* @length: number of data returned in the array
|
||||
* @mask: specifies which values to be requested
|
||||
*
|
||||
* Return: an error code or IIO_AVAIL_LIST
|
||||
*/
|
||||
static int cros_ec_accel_legacy_read_avail(struct iio_dev *indio_dev,
|
||||
struct iio_chan_spec const *chan,
|
||||
const int **vals,
|
||||
int *type,
|
||||
int *length,
|
||||
long mask)
|
||||
{
|
||||
switch (mask) {
|
||||
case IIO_CHAN_INFO_SAMP_FREQ:
|
||||
*length = ARRAY_SIZE(cros_ec_legacy_sample_freq);
|
||||
*vals = cros_ec_legacy_sample_freq;
|
||||
*type = IIO_VAL_INT_PLUS_MICRO;
|
||||
return IIO_AVAIL_LIST;
|
||||
}
|
||||
|
||||
return -EINVAL;
|
||||
}
|
||||
|
||||
static const struct iio_info cros_ec_accel_legacy_info = {
|
||||
.read_raw = &cros_ec_accel_legacy_read,
|
||||
.write_raw = &cros_ec_accel_legacy_write,
|
||||
.read_avail = &cros_ec_accel_legacy_read_avail,
|
||||
};
|
||||
|
||||
/*
|
||||
|
@ -142,7 +182,11 @@ static const struct iio_info cros_ec_accel_legacy_info = {
|
|||
.info_mask_separate = \
|
||||
BIT(IIO_CHAN_INFO_RAW) | \
|
||||
BIT(IIO_CHAN_INFO_CALIBBIAS), \
|
||||
.info_mask_shared_by_all = BIT(IIO_CHAN_INFO_SCALE), \
|
||||
.info_mask_shared_by_all = \
|
||||
BIT(IIO_CHAN_INFO_SCALE) | \
|
||||
BIT(IIO_CHAN_INFO_SAMP_FREQ), \
|
||||
.info_mask_shared_by_all_available = \
|
||||
BIT(IIO_CHAN_INFO_SAMP_FREQ), \
|
||||
.ext_info = cros_ec_sensors_ext_info, \
|
||||
.scan_type = { \
|
||||
.sign = 's', \
|
||||
|
|
|
@ -120,7 +120,6 @@ static int da280_probe(struct i2c_client *client,
|
|||
data->client = client;
|
||||
i2c_set_clientdata(client, indio_dev);
|
||||
|
||||
indio_dev->dev.parent = &client->dev;
|
||||
indio_dev->info = &da280_info;
|
||||
indio_dev->modes = INDIO_DIRECT_MODE;
|
||||
indio_dev->channels = da280_channels;
|
||||
|
|
|
@ -231,7 +231,6 @@ static int da311_probe(struct i2c_client *client,
|
|||
data->client = client;
|
||||
i2c_set_clientdata(client, indio_dev);
|
||||
|
||||
indio_dev->dev.parent = &client->dev;
|
||||
indio_dev->info = &da311_info;
|
||||
indio_dev->name = "da311";
|
||||
indio_dev->modes = INDIO_DIRECT_MODE;
|
||||
|
|
|
@ -161,7 +161,6 @@ static int dmard06_probe(struct i2c_client *client,
|
|||
dmard06->chip_id = ret;
|
||||
|
||||
i2c_set_clientdata(client, indio_dev);
|
||||
indio_dev->dev.parent = &client->dev;
|
||||
indio_dev->name = DMARD06_DRV_NAME;
|
||||
indio_dev->modes = INDIO_DIRECT_MODE;
|
||||
indio_dev->channels = dmard06_channels;
|
||||
|
|
|
@ -116,7 +116,6 @@ static int dmard09_probe(struct i2c_client *client,
|
|||
}
|
||||
|
||||
i2c_set_clientdata(client, indio_dev);
|
||||
indio_dev->dev.parent = &client->dev;
|
||||
indio_dev->name = DMARD09_DRV_NAME;
|
||||
indio_dev->modes = INDIO_DIRECT_MODE;
|
||||
indio_dev->channels = dmard09_channels;
|
||||
|
|
|
@ -196,7 +196,6 @@ static int dmard10_probe(struct i2c_client *client,
|
|||
data->client = client;
|
||||
i2c_set_clientdata(client, indio_dev);
|
||||
|
||||
indio_dev->dev.parent = &client->dev;
|
||||
indio_dev->info = &dmard10_info;
|
||||
indio_dev->name = "dmard10";
|
||||
indio_dev->modes = INDIO_DIRECT_MODE;
|
||||
|
|
|
@ -384,7 +384,6 @@ static int hid_accel_3d_probe(struct platform_device *pdev)
|
|||
goto error_free_dev_mem;
|
||||
}
|
||||
|
||||
indio_dev->dev.parent = &pdev->dev;
|
||||
indio_dev->info = &accel_3d_info;
|
||||
indio_dev->name = name;
|
||||
indio_dev->modes = INDIO_DIRECT_MODE;
|
||||
|
|
|
@ -1027,9 +1027,7 @@ static const struct iio_chan_spec kxcjk1013_channels[] = {
|
|||
|
||||
static const struct iio_buffer_setup_ops kxcjk1013_buffer_setup_ops = {
|
||||
.preenable = kxcjk1013_buffer_preenable,
|
||||
.postenable = iio_triggered_buffer_postenable,
|
||||
.postdisable = kxcjk1013_buffer_postdisable,
|
||||
.predisable = iio_triggered_buffer_predisable,
|
||||
};
|
||||
|
||||
static const struct iio_info kxcjk1013_info = {
|
||||
|
@ -1311,7 +1309,6 @@ static int kxcjk1013_probe(struct i2c_client *client,
|
|||
|
||||
mutex_init(&data->mutex);
|
||||
|
||||
indio_dev->dev.parent = &client->dev;
|
||||
indio_dev->channels = kxcjk1013_channels;
|
||||
indio_dev->num_channels = ARRAY_SIZE(kxcjk1013_channels);
|
||||
indio_dev->available_scan_masks = kxcjk1013_scan_masks;
|
||||
|
|
|
@ -252,8 +252,6 @@ static int kxsd9_buffer_postdisable(struct iio_dev *indio_dev)
|
|||
|
||||
static const struct iio_buffer_setup_ops kxsd9_buffer_setup_ops = {
|
||||
.preenable = kxsd9_buffer_preenable,
|
||||
.postenable = iio_triggered_buffer_postenable,
|
||||
.predisable = iio_triggered_buffer_predisable,
|
||||
.postdisable = kxsd9_buffer_postdisable,
|
||||
};
|
||||
|
||||
|
@ -411,7 +409,6 @@ int kxsd9_common_probe(struct device *dev,
|
|||
indio_dev->channels = kxsd9_channels;
|
||||
indio_dev->num_channels = ARRAY_SIZE(kxsd9_channels);
|
||||
indio_dev->name = name;
|
||||
indio_dev->dev.parent = dev;
|
||||
indio_dev->info = &kxsd9_info;
|
||||
indio_dev->modes = INDIO_DIRECT_MODE;
|
||||
indio_dev->available_scan_masks = kxsd9_scan_masks;
|
||||
|
|
|
@ -132,7 +132,6 @@ static int mc3230_probe(struct i2c_client *client,
|
|||
data->client = client;
|
||||
i2c_set_clientdata(client, indio_dev);
|
||||
|
||||
indio_dev->dev.parent = &client->dev;
|
||||
indio_dev->info = &mc3230_info;
|
||||
indio_dev->name = "mc3230";
|
||||
indio_dev->modes = INDIO_DIRECT_MODE;
|
||||
|
|
|
@ -260,7 +260,6 @@ int mma7455_core_probe(struct device *dev, struct regmap *regmap,
|
|||
|
||||
indio_dev->info = &mma7455_info;
|
||||
indio_dev->name = name;
|
||||
indio_dev->dev.parent = dev;
|
||||
indio_dev->modes = INDIO_DIRECT_MODE;
|
||||
indio_dev->channels = mma7455_channels;
|
||||
indio_dev->num_channels = ARRAY_SIZE(mma7455_channels);
|
||||
|
|
|
@ -188,7 +188,6 @@ static int mma7660_probe(struct i2c_client *client,
|
|||
mutex_init(&data->lock);
|
||||
data->mode = MMA7660_MODE_STANDBY;
|
||||
|
||||
indio_dev->dev.parent = &client->dev;
|
||||
indio_dev->info = &mma7660_info;
|
||||
indio_dev->name = MMA7660_DRIVER_NAME;
|
||||
indio_dev->modes = INDIO_DIRECT_MODE;
|
||||
|
|
|
@ -1592,7 +1592,6 @@ static int mma8452_probe(struct i2c_client *client,
|
|||
i2c_set_clientdata(client, indio_dev);
|
||||
indio_dev->info = &mma8452_info;
|
||||
indio_dev->name = id->name;
|
||||
indio_dev->dev.parent = &client->dev;
|
||||
indio_dev->modes = INDIO_DIRECT_MODE;
|
||||
indio_dev->channels = data->chip_info->channels;
|
||||
indio_dev->num_channels = data->chip_info->num_channels;
|
||||
|
|
|
@ -473,7 +473,6 @@ static int mma9551_probe(struct i2c_client *client,
|
|||
|
||||
mutex_init(&data->mutex);
|
||||
|
||||
indio_dev->dev.parent = &client->dev;
|
||||
indio_dev->channels = mma9551_channels;
|
||||
indio_dev->num_channels = ARRAY_SIZE(mma9551_channels);
|
||||
indio_dev->name = name;
|
||||
|
|
|
@ -1103,7 +1103,6 @@ static int mma9553_probe(struct i2c_client *client,
|
|||
if (ret < 0)
|
||||
return ret;
|
||||
|
||||
indio_dev->dev.parent = &client->dev;
|
||||
indio_dev->channels = mma9553_channels;
|
||||
indio_dev->num_channels = ARRAY_SIZE(mma9553_channels);
|
||||
indio_dev->name = name;
|
||||
|
|
|
@ -416,7 +416,6 @@ static int mxc4005_probe(struct i2c_client *client,
|
|||
|
||||
mutex_init(&data->mutex);
|
||||
|
||||
indio_dev->dev.parent = &client->dev;
|
||||
indio_dev->channels = mxc4005_channels;
|
||||
indio_dev->num_channels = ARRAY_SIZE(mxc4005_channels);
|
||||
indio_dev->available_scan_masks = mxc4005_scan_masks;
|
||||
|
@ -474,12 +473,14 @@ static int mxc4005_probe(struct i2c_client *client,
|
|||
|
||||
static const struct acpi_device_id mxc4005_acpi_match[] = {
|
||||
{"MXC4005", 0},
|
||||
{"MXC6655", 0},
|
||||
{ },
|
||||
};
|
||||
MODULE_DEVICE_TABLE(acpi, mxc4005_acpi_match);
|
||||
|
||||
static const struct i2c_device_id mxc4005_id[] = {
|
||||
{"mxc4005", 0},
|
||||
{"mxc6655", 0},
|
||||
{ },
|
||||
};
|
||||
MODULE_DEVICE_TABLE(i2c, mxc4005_id);
|
||||
|
|
|
@ -138,7 +138,6 @@ static int mxc6255_probe(struct i2c_client *client,
|
|||
data->regmap = regmap;
|
||||
|
||||
indio_dev->name = MXC6255_DRV_NAME;
|
||||
indio_dev->dev.parent = &client->dev;
|
||||
indio_dev->channels = mxc6255_channels;
|
||||
indio_dev->num_channels = ARRAY_SIZE(mxc6255_channels);
|
||||
indio_dev->modes = INDIO_DIRECT_MODE;
|
||||
|
|
|
@ -1467,7 +1467,6 @@ static int sca3000_probe(struct spi_device *spi)
|
|||
st->info = &sca3000_spi_chip_info_tbl[spi_get_device_id(spi)
|
||||
->driver_data];
|
||||
|
||||
indio_dev->dev.parent = &spi->dev;
|
||||
indio_dev->name = spi_get_device_id(spi)->name;
|
||||
indio_dev->info = &sca3000_info;
|
||||
if (st->info->temp_output) {
|
||||
|
|
|
@ -108,8 +108,6 @@ static int ssp_accel_probe(struct platform_device *pdev)
|
|||
spd->type = SSP_ACCELEROMETER_SENSOR;
|
||||
|
||||
indio_dev->name = ssp_accel_device_name;
|
||||
indio_dev->dev.parent = &pdev->dev;
|
||||
indio_dev->dev.of_node = pdev->dev.of_node;
|
||||
indio_dev->info = &ssp_accel_iio_info;
|
||||
indio_dev->modes = INDIO_BUFFER_SOFTWARE;
|
||||
indio_dev->channels = ssp_acc_channels;
|
||||
|
|
|
@ -33,13 +33,9 @@ static int st_accel_buffer_postenable(struct iio_dev *indio_dev)
|
|||
{
|
||||
int err;
|
||||
|
||||
err = iio_triggered_buffer_postenable(indio_dev);
|
||||
if (err < 0)
|
||||
return err;
|
||||
|
||||
err = st_sensors_set_axis_enable(indio_dev, indio_dev->active_scan_mask[0]);
|
||||
if (err < 0)
|
||||
goto st_accel_buffer_predisable;
|
||||
return err;
|
||||
|
||||
err = st_sensors_set_enable(indio_dev, true);
|
||||
if (err < 0)
|
||||
|
@ -49,27 +45,19 @@ static int st_accel_buffer_postenable(struct iio_dev *indio_dev)
|
|||
|
||||
st_accel_buffer_enable_all_axis:
|
||||
st_sensors_set_axis_enable(indio_dev, ST_SENSORS_ENABLE_ALL_AXIS);
|
||||
st_accel_buffer_predisable:
|
||||
iio_triggered_buffer_predisable(indio_dev);
|
||||
return err;
|
||||
}
|
||||
|
||||
static int st_accel_buffer_predisable(struct iio_dev *indio_dev)
|
||||
{
|
||||
int err, err2;
|
||||
int err;
|
||||
|
||||
err = st_sensors_set_enable(indio_dev, false);
|
||||
if (err < 0)
|
||||
goto st_accel_buffer_predisable;
|
||||
return err;
|
||||
|
||||
err = st_sensors_set_axis_enable(indio_dev, ST_SENSORS_ENABLE_ALL_AXIS);
|
||||
|
||||
st_accel_buffer_predisable:
|
||||
err2 = iio_triggered_buffer_predisable(indio_dev);
|
||||
if (!err)
|
||||
err = err2;
|
||||
|
||||
return err;
|
||||
return st_sensors_set_axis_enable(indio_dev,
|
||||
ST_SENSORS_ENABLE_ALL_AXIS);
|
||||
}
|
||||
|
||||
static const struct iio_buffer_setup_ops st_accel_buffer_setup_ops = {
|
||||
|
|
|
@ -492,8 +492,6 @@ static int stk8312_buffer_postdisable(struct iio_dev *indio_dev)
|
|||
|
||||
static const struct iio_buffer_setup_ops stk8312_buffer_setup_ops = {
|
||||
.preenable = stk8312_buffer_preenable,
|
||||
.postenable = iio_triggered_buffer_postenable,
|
||||
.predisable = iio_triggered_buffer_predisable,
|
||||
.postdisable = stk8312_buffer_postdisable,
|
||||
};
|
||||
|
||||
|
@ -515,7 +513,6 @@ static int stk8312_probe(struct i2c_client *client,
|
|||
i2c_set_clientdata(client, indio_dev);
|
||||
mutex_init(&data->lock);
|
||||
|
||||
indio_dev->dev.parent = &client->dev;
|
||||
indio_dev->info = &stk8312_info;
|
||||
indio_dev->name = STK8312_DRIVER_NAME;
|
||||
indio_dev->modes = INDIO_DIRECT_MODE;
|
||||
|
|
|
@ -376,8 +376,6 @@ static int stk8ba50_buffer_postdisable(struct iio_dev *indio_dev)
|
|||
|
||||
static const struct iio_buffer_setup_ops stk8ba50_buffer_setup_ops = {
|
||||
.preenable = stk8ba50_buffer_preenable,
|
||||
.postenable = iio_triggered_buffer_postenable,
|
||||
.predisable = iio_triggered_buffer_predisable,
|
||||
.postdisable = stk8ba50_buffer_postdisable,
|
||||
};
|
||||
|
||||
|
@ -399,7 +397,6 @@ static int stk8ba50_probe(struct i2c_client *client,
|
|||
i2c_set_clientdata(client, indio_dev);
|
||||
mutex_init(&data->lock);
|
||||
|
||||
indio_dev->dev.parent = &client->dev;
|
||||
indio_dev->info = &stk8ba50_info;
|
||||
indio_dev->name = STK8BA50_DRIVER_NAME;
|
||||
indio_dev->modes = INDIO_DIRECT_MODE;
|
||||
|
|
|
@ -294,7 +294,7 @@ config ASPEED_ADC
|
|||
|
||||
config AT91_ADC
|
||||
tristate "Atmel AT91 ADC"
|
||||
depends on ARCH_AT91
|
||||
depends on ARCH_AT91 || COMPILE_TEST
|
||||
depends on INPUT && SYSFS
|
||||
select IIO_BUFFER
|
||||
select IIO_TRIGGERED_BUFFER
|
||||
|
|
|
@ -1163,8 +1163,6 @@ static int ab8500_gpadc_probe(struct platform_device *pdev)
|
|||
|
||||
pm_runtime_put(dev);
|
||||
|
||||
indio_dev->dev.parent = dev;
|
||||
indio_dev->dev.of_node = np;
|
||||
indio_dev->name = "ab8500-gpadc";
|
||||
indio_dev->modes = INDIO_DIRECT_MODE;
|
||||
indio_dev->info = &ab8500_gpadc_info;
|
||||
|
|
|
@ -224,7 +224,6 @@ int ad7091r_probe(struct device *dev, const char *name,
|
|||
st->chip_info = chip_info;
|
||||
st->map = map;
|
||||
|
||||
iio_dev->dev.parent = dev;
|
||||
iio_dev->name = name;
|
||||
iio_dev->info = &ad7091r_info;
|
||||
iio_dev->modes = INDIO_DIRECT_MODE;
|
||||
|
|
|
@ -683,7 +683,6 @@ static int ad7124_probe(struct spi_device *spi)
|
|||
|
||||
spi_set_drvdata(spi, indio_dev);
|
||||
|
||||
indio_dev->dev.parent = &spi->dev;
|
||||
indio_dev->name = spi_get_device_id(spi)->name;
|
||||
indio_dev->modes = INDIO_DIRECT_MODE;
|
||||
indio_dev->info = &ad7124_info;
|
||||
|
|
|
@ -970,7 +970,6 @@ static int ad7192_probe(struct spi_device *spi)
|
|||
|
||||
spi_set_drvdata(spi, indio_dev);
|
||||
st->chip_info = of_device_get_match_data(&spi->dev);
|
||||
indio_dev->dev.parent = &spi->dev;
|
||||
indio_dev->name = st->chip_info->name;
|
||||
indio_dev->modes = INDIO_DIRECT_MODE;
|
||||
|
||||
|
|
|
@ -74,8 +74,6 @@ static int ad7266_postdisable(struct iio_dev *indio_dev)
|
|||
|
||||
static const struct iio_buffer_setup_ops iio_triggered_buffer_setup_ops = {
|
||||
.preenable = &ad7266_preenable,
|
||||
.postenable = &iio_triggered_buffer_postenable,
|
||||
.predisable = &iio_triggered_buffer_predisable,
|
||||
.postdisable = &ad7266_postdisable,
|
||||
};
|
||||
|
||||
|
@ -437,8 +435,6 @@ static int ad7266_probe(struct spi_device *spi)
|
|||
spi_set_drvdata(spi, indio_dev);
|
||||
st->spi = spi;
|
||||
|
||||
indio_dev->dev.parent = &spi->dev;
|
||||
indio_dev->dev.of_node = spi->dev.of_node;
|
||||
indio_dev->name = spi_get_device_id(spi)->name;
|
||||
indio_dev->modes = INDIO_DIRECT_MODE;
|
||||
indio_dev->info = &ad7266_info;
|
||||
|
|
|
@ -502,8 +502,6 @@ static int ad7291_probe(struct i2c_client *client,
|
|||
indio_dev->channels = ad7291_channels;
|
||||
indio_dev->num_channels = ARRAY_SIZE(ad7291_channels);
|
||||
|
||||
indio_dev->dev.parent = &client->dev;
|
||||
indio_dev->dev.of_node = client->dev.of_node;
|
||||
indio_dev->info = &ad7291_info;
|
||||
indio_dev->modes = INDIO_DIRECT_MODE;
|
||||
|
||||
|
|
|
@ -304,7 +304,6 @@ static int ad7292_probe(struct spi_device *spi)
|
|||
st->vref_mv = 1250;
|
||||
}
|
||||
|
||||
indio_dev->dev.parent = &spi->dev;
|
||||
indio_dev->name = spi_get_device_id(spi)->name;
|
||||
indio_dev->modes = INDIO_DIRECT_MODE;
|
||||
indio_dev->info = &ad7292_info;
|
||||
|
|
|
@ -312,8 +312,6 @@ static int ad7298_probe(struct spi_device *spi)
|
|||
st->spi = spi;
|
||||
|
||||
indio_dev->name = spi_get_device_id(spi)->name;
|
||||
indio_dev->dev.parent = &spi->dev;
|
||||
indio_dev->dev.of_node = spi->dev.of_node;
|
||||
indio_dev->modes = INDIO_DIRECT_MODE;
|
||||
indio_dev->channels = ad7298_channels;
|
||||
indio_dev->num_channels = ARRAY_SIZE(ad7298_channels);
|
||||
|
|
|
@ -300,9 +300,6 @@ static int ad7476_probe(struct spi_device *spi)
|
|||
|
||||
st->spi = spi;
|
||||
|
||||
/* Establish that the iio_dev is a child of the spi device */
|
||||
indio_dev->dev.parent = &spi->dev;
|
||||
indio_dev->dev.of_node = spi->dev.of_node;
|
||||
indio_dev->name = spi_get_device_id(spi)->name;
|
||||
indio_dev->modes = INDIO_DIRECT_MODE;
|
||||
indio_dev->channels = st->chip_info->channel;
|
||||
|
|
|
@ -499,7 +499,6 @@ static int ad7606_buffer_postenable(struct iio_dev *indio_dev)
|
|||
{
|
||||
struct ad7606_state *st = iio_priv(indio_dev);
|
||||
|
||||
iio_triggered_buffer_postenable(indio_dev);
|
||||
gpiod_set_value(st->gpio_convst, 1);
|
||||
|
||||
return 0;
|
||||
|
@ -511,7 +510,7 @@ static int ad7606_buffer_predisable(struct iio_dev *indio_dev)
|
|||
|
||||
gpiod_set_value(st->gpio_convst, 0);
|
||||
|
||||
return iio_triggered_buffer_predisable(indio_dev);
|
||||
return 0;
|
||||
}
|
||||
|
||||
static const struct iio_buffer_setup_ops ad7606_buffer_ops = {
|
||||
|
@ -614,7 +613,6 @@ int ad7606_probe(struct device *dev, int irq, void __iomem *base_address,
|
|||
if (ret)
|
||||
return ret;
|
||||
|
||||
indio_dev->dev.parent = dev;
|
||||
if (st->gpio_os) {
|
||||
if (st->gpio_range)
|
||||
indio_dev->info = &ad7606_info_os_and_range;
|
||||
|
|
|
@ -178,8 +178,6 @@ static const struct ad7766_chip_info ad7766_chip_info[] = {
|
|||
|
||||
static const struct iio_buffer_setup_ops ad7766_buffer_setup_ops = {
|
||||
.preenable = &ad7766_preenable,
|
||||
.postenable = &iio_triggered_buffer_postenable,
|
||||
.predisable = &iio_triggered_buffer_predisable,
|
||||
.postdisable = &ad7766_postdisable,
|
||||
};
|
||||
|
||||
|
@ -242,7 +240,6 @@ static int ad7766_probe(struct spi_device *spi)
|
|||
if (IS_ERR(ad7766->pd_gpio))
|
||||
return PTR_ERR(ad7766->pd_gpio);
|
||||
|
||||
indio_dev->dev.parent = &spi->dev;
|
||||
indio_dev->name = spi_get_device_id(spi)->name;
|
||||
indio_dev->modes = INDIO_DIRECT_MODE;
|
||||
indio_dev->channels = ad7766_channels;
|
||||
|
|
|
@ -490,7 +490,6 @@ static int ad7768_buffer_postenable(struct iio_dev *indio_dev)
|
|||
{
|
||||
struct ad7768_state *st = iio_priv(indio_dev);
|
||||
|
||||
iio_triggered_buffer_postenable(indio_dev);
|
||||
/*
|
||||
* Write a 1 to the LSB of the INTERFACE_FORMAT register to enter
|
||||
* continuous read mode. Subsequent data reads do not require an
|
||||
|
@ -502,17 +501,12 @@ static int ad7768_buffer_postenable(struct iio_dev *indio_dev)
|
|||
static int ad7768_buffer_predisable(struct iio_dev *indio_dev)
|
||||
{
|
||||
struct ad7768_state *st = iio_priv(indio_dev);
|
||||
int ret;
|
||||
|
||||
/*
|
||||
* To exit continuous read mode, perform a single read of the ADC_DATA
|
||||
* reg (0x2C), which allows further configuration of the device.
|
||||
*/
|
||||
ret = ad7768_spi_reg_read(st, AD7768_REG_ADC_DATA, 3);
|
||||
if (ret < 0)
|
||||
return ret;
|
||||
|
||||
return iio_triggered_buffer_predisable(indio_dev);
|
||||
return ad7768_spi_reg_read(st, AD7768_REG_ADC_DATA, 3);
|
||||
}
|
||||
|
||||
static const struct iio_buffer_setup_ops ad7768_buffer_ops = {
|
||||
|
@ -584,7 +578,6 @@ static int ad7768_probe(struct spi_device *spi)
|
|||
|
||||
indio_dev->channels = ad7768_channels;
|
||||
indio_dev->num_channels = ARRAY_SIZE(ad7768_channels);
|
||||
indio_dev->dev.parent = &spi->dev;
|
||||
indio_dev->name = spi_get_device_id(spi)->name;
|
||||
indio_dev->info = &ad7768_info;
|
||||
indio_dev->modes = INDIO_DIRECT_MODE | INDIO_BUFFER_TRIGGERED;
|
||||
|
|
|
@ -320,7 +320,6 @@ static int ad7780_probe(struct spi_device *spi)
|
|||
|
||||
spi_set_drvdata(spi, indio_dev);
|
||||
|
||||
indio_dev->dev.parent = &spi->dev;
|
||||
indio_dev->name = spi_get_device_id(spi)->name;
|
||||
indio_dev->modes = INDIO_DIRECT_MODE;
|
||||
indio_dev->channels = &st->chip_info->channel;
|
||||
|
|
|
@ -425,8 +425,6 @@ static int ad7791_probe(struct spi_device *spi)
|
|||
|
||||
spi_set_drvdata(spi, indio_dev);
|
||||
|
||||
indio_dev->dev.parent = &spi->dev;
|
||||
indio_dev->dev.of_node = spi->dev.of_node;
|
||||
indio_dev->name = spi_get_device_id(spi)->name;
|
||||
indio_dev->modes = INDIO_DIRECT_MODE;
|
||||
indio_dev->channels = st->info->channels;
|
||||
|
|
|
@ -818,8 +818,6 @@ static int ad7793_probe(struct spi_device *spi)
|
|||
|
||||
spi_set_drvdata(spi, indio_dev);
|
||||
|
||||
indio_dev->dev.parent = &spi->dev;
|
||||
indio_dev->dev.of_node = spi->dev.of_node;
|
||||
indio_dev->name = spi_get_device_id(spi)->name;
|
||||
indio_dev->modes = INDIO_DIRECT_MODE;
|
||||
indio_dev->channels = st->chip_info->channels;
|
||||
|
|
|
@ -136,8 +136,6 @@ static irqreturn_t ad7887_trigger_handler(int irq, void *p)
|
|||
|
||||
static const struct iio_buffer_setup_ops ad7887_ring_setup_ops = {
|
||||
.preenable = &ad7887_ring_preenable,
|
||||
.postenable = &iio_triggered_buffer_postenable,
|
||||
.predisable = &iio_triggered_buffer_predisable,
|
||||
.postdisable = &ad7887_ring_postdisable,
|
||||
};
|
||||
|
||||
|
@ -264,9 +262,6 @@ static int ad7887_probe(struct spi_device *spi)
|
|||
spi_set_drvdata(spi, indio_dev);
|
||||
st->spi = spi;
|
||||
|
||||
/* Estabilish that the iio_dev is a child of the spi device */
|
||||
indio_dev->dev.parent = &spi->dev;
|
||||
indio_dev->dev.of_node = spi->dev.of_node;
|
||||
indio_dev->name = spi_get_device_id(spi)->name;
|
||||
indio_dev->info = &ad7887_info;
|
||||
indio_dev->modes = INDIO_DIRECT_MODE;
|
||||
|
|
|
@ -315,8 +315,6 @@ static int ad7923_probe(struct spi_device *spi)
|
|||
info = &ad7923_chip_info[spi_get_device_id(spi)->driver_data];
|
||||
|
||||
indio_dev->name = spi_get_device_id(spi)->name;
|
||||
indio_dev->dev.parent = &spi->dev;
|
||||
indio_dev->dev.of_node = spi->dev.of_node;
|
||||
indio_dev->modes = INDIO_DIRECT_MODE;
|
||||
indio_dev->channels = info->channels;
|
||||
indio_dev->num_channels = info->num_channels;
|
||||
|
|
|
@ -3,7 +3,7 @@
|
|||
*
|
||||
* Copyright (C) 2018 CMC NV
|
||||
*
|
||||
* http://www.analog.com/media/en/technical-documentation/data-sheets/AD7949.pdf
|
||||
* https://www.analog.com/media/en/technical-documentation/data-sheets/AD7949.pdf
|
||||
*/
|
||||
|
||||
#include <linux/delay.h>
|
||||
|
@ -243,8 +243,6 @@ static int ad7949_spi_probe(struct spi_device *spi)
|
|||
return -ENOMEM;
|
||||
}
|
||||
|
||||
indio_dev->dev.parent = dev;
|
||||
indio_dev->dev.of_node = dev->of_node;
|
||||
indio_dev->info = &ad7949_spi_info;
|
||||
indio_dev->name = spi_get_device_id(spi)->name;
|
||||
indio_dev->modes = INDIO_DIRECT_MODE;
|
||||
|
|
|
@ -814,8 +814,6 @@ static int ad799x_probe(struct i2c_client *client,
|
|||
|
||||
st->client = client;
|
||||
|
||||
indio_dev->dev.parent = &client->dev;
|
||||
indio_dev->dev.of_node = client->dev.of_node;
|
||||
indio_dev->name = id->name;
|
||||
indio_dev->info = st->chip_config->info;
|
||||
|
||||
|
|
|
@ -345,10 +345,6 @@ static int ad_sd_buffer_postenable(struct iio_dev *indio_dev)
|
|||
unsigned int channel;
|
||||
int ret;
|
||||
|
||||
ret = iio_triggered_buffer_postenable(indio_dev);
|
||||
if (ret < 0)
|
||||
return ret;
|
||||
|
||||
channel = find_first_bit(indio_dev->active_scan_mask,
|
||||
indio_dev->masklength);
|
||||
ret = ad_sigma_delta_set_channel(sigma_delta,
|
||||
|
@ -441,7 +437,6 @@ static irqreturn_t ad_sd_trigger_handler(int irq, void *p)
|
|||
|
||||
static const struct iio_buffer_setup_ops ad_sd_buffer_setup_ops = {
|
||||
.postenable = &ad_sd_buffer_postenable,
|
||||
.predisable = &iio_triggered_buffer_predisable,
|
||||
.postdisable = &ad_sd_buffer_postdisable,
|
||||
.validate_scan_mask = &iio_validate_scan_mask_onehot,
|
||||
};
|
||||
|
|
|
@ -435,7 +435,6 @@ static int adi_axi_adc_probe(struct platform_device *pdev)
|
|||
}
|
||||
|
||||
indio_dev->info = &adi_axi_adc_info;
|
||||
indio_dev->dev.parent = &pdev->dev;
|
||||
indio_dev->name = "adi-axi-adc";
|
||||
indio_dev->modes = INDIO_DIRECT_MODE;
|
||||
indio_dev->num_channels = conv->chip_info->num_channels;
|
||||
|
|
|
@ -252,7 +252,6 @@ static int aspeed_adc_probe(struct platform_device *pdev)
|
|||
|
||||
model_data = of_device_get_match_data(&pdev->dev);
|
||||
indio_dev->name = model_data->model_name;
|
||||
indio_dev->dev.parent = &pdev->dev;
|
||||
indio_dev->info = &aspeed_adc_iio_info;
|
||||
indio_dev->modes = INDIO_DIRECT_MODE;
|
||||
indio_dev->channels = aspeed_adc_iio_channels;
|
||||
|
|
|
@ -402,6 +402,7 @@ struct at91_adc_state {
|
|||
wait_queue_head_t wq_data_available;
|
||||
struct at91_adc_dma dma_st;
|
||||
struct at91_adc_touch touch_st;
|
||||
struct iio_dev *indio_dev;
|
||||
u16 buffer[AT91_BUFFER_MAX_HWORDS];
|
||||
/*
|
||||
* lock to prevent concurrent 'single conversion' requests through
|
||||
|
@ -642,13 +643,13 @@ static u16 at91_adc_touch_pos(struct at91_adc_state *st, int reg)
|
|||
/* first half of register is the x or y, second half is the scale */
|
||||
val = at91_adc_readl(st, reg);
|
||||
if (!val)
|
||||
dev_dbg(&iio_priv_to_dev(st)->dev, "pos is 0\n");
|
||||
dev_dbg(&st->indio_dev->dev, "pos is 0\n");
|
||||
|
||||
pos = val & AT91_SAMA5D2_XYZ_MASK;
|
||||
result = (pos << AT91_SAMA5D2_MAX_POS_BITS) - pos;
|
||||
scale = (val >> 16) & AT91_SAMA5D2_XYZ_MASK;
|
||||
if (scale == 0) {
|
||||
dev_err(&iio_priv_to_dev(st)->dev, "scale is 0\n");
|
||||
dev_err(&st->indio_dev->dev, "scale is 0\n");
|
||||
return 0;
|
||||
}
|
||||
result /= scale;
|
||||
|
@ -937,14 +938,6 @@ static int at91_adc_buffer_preenable(struct iio_dev *indio_dev)
|
|||
return 0;
|
||||
}
|
||||
|
||||
static int at91_adc_buffer_postenable(struct iio_dev *indio_dev)
|
||||
{
|
||||
if (at91_adc_current_chan_is_touch(indio_dev))
|
||||
return 0;
|
||||
|
||||
return iio_triggered_buffer_postenable(indio_dev);
|
||||
}
|
||||
|
||||
static int at91_adc_buffer_postdisable(struct iio_dev *indio_dev)
|
||||
{
|
||||
struct at91_adc_state *st = iio_priv(indio_dev);
|
||||
|
@ -995,19 +988,9 @@ static int at91_adc_buffer_postdisable(struct iio_dev *indio_dev)
|
|||
return 0;
|
||||
}
|
||||
|
||||
static int at91_adc_buffer_predisable(struct iio_dev *indio_dev)
|
||||
{
|
||||
if (at91_adc_current_chan_is_touch(indio_dev))
|
||||
return 0;
|
||||
|
||||
return iio_triggered_buffer_predisable(indio_dev);
|
||||
}
|
||||
|
||||
static const struct iio_buffer_setup_ops at91_buffer_setup_ops = {
|
||||
.preenable = &at91_adc_buffer_preenable,
|
||||
.postdisable = &at91_adc_buffer_postdisable,
|
||||
.postenable = &at91_adc_buffer_postenable,
|
||||
.predisable = &at91_adc_buffer_predisable,
|
||||
};
|
||||
|
||||
static struct iio_trigger *at91_adc_allocate_trigger(struct iio_dev *indio,
|
||||
|
@ -1204,9 +1187,9 @@ static unsigned at91_adc_startup_time(unsigned startup_time_min,
|
|||
return i;
|
||||
}
|
||||
|
||||
static void at91_adc_setup_samp_freq(struct at91_adc_state *st, unsigned freq)
|
||||
static void at91_adc_setup_samp_freq(struct iio_dev *indio_dev, unsigned freq)
|
||||
{
|
||||
struct iio_dev *indio_dev = iio_priv_to_dev(st);
|
||||
struct at91_adc_state *st = iio_priv(indio_dev);
|
||||
unsigned f_per, prescal, startup, mr;
|
||||
|
||||
f_per = clk_get_rate(st->per_clk);
|
||||
|
@ -1275,9 +1258,9 @@ static void at91_adc_pen_detect_interrupt(struct at91_adc_state *st)
|
|||
st->touch_st.touching = true;
|
||||
}
|
||||
|
||||
static void at91_adc_no_pen_detect_interrupt(struct at91_adc_state *st)
|
||||
static void at91_adc_no_pen_detect_interrupt(struct iio_dev *indio_dev)
|
||||
{
|
||||
struct iio_dev *indio_dev = iio_priv_to_dev(st);
|
||||
struct at91_adc_state *st = iio_priv(indio_dev);
|
||||
|
||||
at91_adc_writel(st, AT91_SAMA5D2_TRGR,
|
||||
AT91_SAMA5D2_TRGR_TRGMOD_NO_TRIGGER);
|
||||
|
@ -1297,7 +1280,7 @@ static void at91_adc_workq_handler(struct work_struct *workq)
|
|||
struct at91_adc_touch, workq);
|
||||
struct at91_adc_state *st = container_of(touch_st,
|
||||
struct at91_adc_state, touch_st);
|
||||
struct iio_dev *indio_dev = iio_priv_to_dev(st);
|
||||
struct iio_dev *indio_dev = st->indio_dev;
|
||||
|
||||
iio_push_to_buffers(indio_dev, st->buffer);
|
||||
}
|
||||
|
@ -1318,7 +1301,7 @@ static irqreturn_t at91_adc_interrupt(int irq, void *private)
|
|||
at91_adc_pen_detect_interrupt(st);
|
||||
} else if ((status & AT91_SAMA5D2_IER_NOPEN)) {
|
||||
/* nopen detected IRQ */
|
||||
at91_adc_no_pen_detect_interrupt(st);
|
||||
at91_adc_no_pen_detect_interrupt(indio);
|
||||
} else if ((status & AT91_SAMA5D2_ISR_PENS) &&
|
||||
((status & rdy_mask) == rdy_mask)) {
|
||||
/* periodic trigger IRQ - during pen sense */
|
||||
|
@ -1486,7 +1469,7 @@ static int at91_adc_write_raw(struct iio_dev *indio_dev,
|
|||
val > st->soc_info.max_sample_rate)
|
||||
return -EINVAL;
|
||||
|
||||
at91_adc_setup_samp_freq(st, val);
|
||||
at91_adc_setup_samp_freq(indio_dev, val);
|
||||
return 0;
|
||||
default:
|
||||
return -EINVAL;
|
||||
|
@ -1624,8 +1607,10 @@ static int at91_adc_update_scan_mode(struct iio_dev *indio_dev,
|
|||
return 0;
|
||||
}
|
||||
|
||||
static void at91_adc_hw_init(struct at91_adc_state *st)
|
||||
static void at91_adc_hw_init(struct iio_dev *indio_dev)
|
||||
{
|
||||
struct at91_adc_state *st = iio_priv(indio_dev);
|
||||
|
||||
at91_adc_writel(st, AT91_SAMA5D2_CR, AT91_SAMA5D2_CR_SWRST);
|
||||
at91_adc_writel(st, AT91_SAMA5D2_IDR, 0xffffffff);
|
||||
/*
|
||||
|
@ -1635,7 +1620,7 @@ static void at91_adc_hw_init(struct at91_adc_state *st)
|
|||
at91_adc_writel(st, AT91_SAMA5D2_MR,
|
||||
AT91_SAMA5D2_MR_TRANSFER(2) | AT91_SAMA5D2_MR_ANACH);
|
||||
|
||||
at91_adc_setup_samp_freq(st, st->soc_info.min_sample_rate);
|
||||
at91_adc_setup_samp_freq(indio_dev, st->soc_info.min_sample_rate);
|
||||
|
||||
/* configure extended mode register */
|
||||
at91_adc_config_emr(st);
|
||||
|
@ -1710,7 +1695,6 @@ static int at91_adc_probe(struct platform_device *pdev)
|
|||
if (!indio_dev)
|
||||
return -ENOMEM;
|
||||
|
||||
indio_dev->dev.parent = &pdev->dev;
|
||||
indio_dev->name = dev_name(&pdev->dev);
|
||||
indio_dev->modes = INDIO_DIRECT_MODE | INDIO_BUFFER_SOFTWARE;
|
||||
indio_dev->info = &at91_adc_info;
|
||||
|
@ -1718,6 +1702,7 @@ static int at91_adc_probe(struct platform_device *pdev)
|
|||
indio_dev->num_channels = ARRAY_SIZE(at91_adc_channels);
|
||||
|
||||
st = iio_priv(indio_dev);
|
||||
st->indio_dev = indio_dev;
|
||||
|
||||
bitmap_set(&st->touch_st.channels_bitmask,
|
||||
AT91_SAMA5D2_TOUCH_X_CHAN_IDX, 1);
|
||||
|
@ -1829,7 +1814,7 @@ static int at91_adc_probe(struct platform_device *pdev)
|
|||
goto vref_disable;
|
||||
}
|
||||
|
||||
at91_adc_hw_init(st);
|
||||
at91_adc_hw_init(indio_dev);
|
||||
|
||||
ret = clk_prepare_enable(st->per_clk);
|
||||
if (ret)
|
||||
|
@ -1945,7 +1930,7 @@ static __maybe_unused int at91_adc_resume(struct device *dev)
|
|||
if (ret)
|
||||
goto vref_disable_resume;
|
||||
|
||||
at91_adc_hw_init(st);
|
||||
at91_adc_hw_init(indio_dev);
|
||||
|
||||
/* reconfiguring trigger hardware state */
|
||||
if (!iio_buffer_enabled(indio_dev))
|
||||
|
|
|
@ -287,13 +287,13 @@ static void handle_adc_eoc_trigger(int irq, struct iio_dev *idev)
|
|||
}
|
||||
}
|
||||
|
||||
static int at91_ts_sample(struct at91_adc_state *st)
|
||||
static int at91_ts_sample(struct iio_dev *idev)
|
||||
{
|
||||
struct at91_adc_state *st = iio_priv(idev);
|
||||
unsigned int xscale, yscale, reg, z1, z2;
|
||||
unsigned int x, y, pres, xpos, ypos;
|
||||
unsigned int rxp = 1;
|
||||
unsigned int factor = 1000;
|
||||
struct iio_dev *idev = iio_priv_to_dev(st);
|
||||
|
||||
unsigned int xyz_mask_bits = st->res;
|
||||
unsigned int xyz_mask = (1 << xyz_mask_bits) - 1;
|
||||
|
@ -449,7 +449,7 @@ static irqreturn_t at91_adc_9x5_interrupt(int irq, void *private)
|
|||
|
||||
if (status & AT91_ADC_ISR_PENS) {
|
||||
/* validate data by pen contact */
|
||||
at91_ts_sample(st);
|
||||
at91_ts_sample(idev);
|
||||
} else {
|
||||
/* triggered by event that is no pen contact, just read
|
||||
* them to clean the interrupt and discard all.
|
||||
|
@ -737,10 +737,10 @@ static int at91_adc_read_raw(struct iio_dev *idev,
|
|||
return -EINVAL;
|
||||
}
|
||||
|
||||
static int at91_adc_of_get_resolution(struct at91_adc_state *st,
|
||||
static int at91_adc_of_get_resolution(struct iio_dev *idev,
|
||||
struct platform_device *pdev)
|
||||
{
|
||||
struct iio_dev *idev = iio_priv_to_dev(st);
|
||||
struct at91_adc_state *st = iio_priv(idev);
|
||||
struct device_node *np = pdev->dev.of_node;
|
||||
int count, i, ret = 0;
|
||||
char *res_name, *s;
|
||||
|
@ -866,10 +866,10 @@ static int at91_adc_probe_dt_ts(struct device_node *node,
|
|||
}
|
||||
}
|
||||
|
||||
static int at91_adc_probe_dt(struct at91_adc_state *st,
|
||||
static int at91_adc_probe_dt(struct iio_dev *idev,
|
||||
struct platform_device *pdev)
|
||||
{
|
||||
struct iio_dev *idev = iio_priv_to_dev(st);
|
||||
struct at91_adc_state *st = iio_priv(idev);
|
||||
struct device_node *node = pdev->dev.of_node;
|
||||
struct device_node *trig_node;
|
||||
int i = 0, ret;
|
||||
|
@ -910,7 +910,7 @@ static int at91_adc_probe_dt(struct at91_adc_state *st,
|
|||
}
|
||||
st->vref_mv = prop;
|
||||
|
||||
ret = at91_adc_of_get_resolution(st, pdev);
|
||||
ret = at91_adc_of_get_resolution(idev, pdev);
|
||||
if (ret)
|
||||
goto error_ret;
|
||||
|
||||
|
@ -1010,9 +1010,9 @@ static void atmel_ts_close(struct input_dev *dev)
|
|||
at91_adc_writel(st, AT91_ADC_IDR, AT91RL_ADC_IER_PEN);
|
||||
}
|
||||
|
||||
static int at91_ts_hw_init(struct at91_adc_state *st, u32 adc_clk_khz)
|
||||
static int at91_ts_hw_init(struct iio_dev *idev, u32 adc_clk_khz)
|
||||
{
|
||||
struct iio_dev *idev = iio_priv_to_dev(st);
|
||||
struct at91_adc_state *st = iio_priv(idev);
|
||||
u32 reg = 0;
|
||||
u32 tssctim = 0;
|
||||
int i = 0;
|
||||
|
@ -1085,11 +1085,11 @@ static int at91_ts_hw_init(struct at91_adc_state *st, u32 adc_clk_khz)
|
|||
return 0;
|
||||
}
|
||||
|
||||
static int at91_ts_register(struct at91_adc_state *st,
|
||||
static int at91_ts_register(struct iio_dev *idev,
|
||||
struct platform_device *pdev)
|
||||
{
|
||||
struct at91_adc_state *st = iio_priv(idev);
|
||||
struct input_dev *input;
|
||||
struct iio_dev *idev = iio_priv_to_dev(st);
|
||||
int ret;
|
||||
|
||||
input = input_allocate_device();
|
||||
|
@ -1161,7 +1161,7 @@ static int at91_adc_probe(struct platform_device *pdev)
|
|||
st = iio_priv(idev);
|
||||
|
||||
if (pdev->dev.of_node)
|
||||
ret = at91_adc_probe_dt(st, pdev);
|
||||
ret = at91_adc_probe_dt(idev, pdev);
|
||||
else
|
||||
ret = at91_adc_probe_pdata(st, pdev);
|
||||
|
||||
|
@ -1172,7 +1172,6 @@ static int at91_adc_probe(struct platform_device *pdev)
|
|||
|
||||
platform_set_drvdata(pdev, idev);
|
||||
|
||||
idev->dev.parent = &pdev->dev;
|
||||
idev->name = dev_name(&pdev->dev);
|
||||
idev->modes = INDIO_DIRECT_MODE;
|
||||
idev->info = &at91_adc_info;
|
||||
|
@ -1301,11 +1300,11 @@ static int at91_adc_probe(struct platform_device *pdev)
|
|||
goto error_disable_adc_clk;
|
||||
}
|
||||
} else {
|
||||
ret = at91_ts_register(st, pdev);
|
||||
ret = at91_ts_register(idev, pdev);
|
||||
if (ret)
|
||||
goto error_disable_adc_clk;
|
||||
|
||||
at91_ts_hw_init(st, adc_clk_khz);
|
||||
at91_ts_hw_init(idev, adc_clk_khz);
|
||||
}
|
||||
|
||||
ret = iio_device_register(idev);
|
||||
|
|
|
@ -668,8 +668,6 @@ static int axp20x_probe(struct platform_device *pdev)
|
|||
platform_set_drvdata(pdev, indio_dev);
|
||||
|
||||
info->regmap = axp20x_dev->regmap;
|
||||
indio_dev->dev.parent = &pdev->dev;
|
||||
indio_dev->dev.of_node = pdev->dev.of_node;
|
||||
indio_dev->modes = INDIO_DIRECT_MODE;
|
||||
|
||||
if (!pdev->dev.of_node) {
|
||||
|
|
|
@ -271,7 +271,6 @@ static int axp288_adc_probe(struct platform_device *pdev)
|
|||
return ret;
|
||||
}
|
||||
|
||||
indio_dev->dev.parent = &pdev->dev;
|
||||
indio_dev->name = pdev->name;
|
||||
indio_dev->channels = axp288_adc_channels;
|
||||
indio_dev->num_channels = ARRAY_SIZE(axp288_adc_channels);
|
||||
|
|
|
@ -573,8 +573,6 @@ static int iproc_adc_probe(struct platform_device *pdev)
|
|||
}
|
||||
|
||||
indio_dev->name = "iproc-static-adc";
|
||||
indio_dev->dev.parent = &pdev->dev;
|
||||
indio_dev->dev.of_node = pdev->dev.of_node;
|
||||
indio_dev->info = &iproc_adc_iio_info;
|
||||
indio_dev->modes = INDIO_DIRECT_MODE;
|
||||
indio_dev->channels = iproc_adc_iio_channels;
|
||||
|
|
|
@ -321,7 +321,6 @@ static int berlin2_adc_probe(struct platform_device *pdev)
|
|||
init_waitqueue_head(&priv->wq);
|
||||
mutex_init(&priv->lock);
|
||||
|
||||
indio_dev->dev.parent = &pdev->dev;
|
||||
indio_dev->name = dev_name(&pdev->dev);
|
||||
indio_dev->modes = INDIO_DIRECT_MODE;
|
||||
indio_dev->info = &berlin2_adc_info;
|
||||
|
|
|
@ -334,7 +334,6 @@ static int cc10001_adc_probe(struct platform_device *pdev)
|
|||
if (ret)
|
||||
return ret;
|
||||
|
||||
indio_dev->dev.parent = &pdev->dev;
|
||||
indio_dev->name = dev_name(&pdev->dev);
|
||||
indio_dev->info = &cc10001_adc_info;
|
||||
indio_dev->modes = INDIO_DIRECT_MODE;
|
||||
|
|
|
@ -15,9 +15,9 @@
|
|||
#include <linux/interrupt.h>
|
||||
#include <linux/kernel.h>
|
||||
#include <linux/module.h>
|
||||
#include <linux/of.h>
|
||||
#include <linux/of_platform.h>
|
||||
#include <linux/mod_devicetable.h>
|
||||
#include <linux/platform_device.h>
|
||||
#include <linux/property.h>
|
||||
#include <linux/regmap.h>
|
||||
|
||||
#include <linux/iio/buffer.h>
|
||||
|
@ -955,22 +955,10 @@ MODULE_DEVICE_TABLE(of, cpcap_adc_id_table);
|
|||
|
||||
static int cpcap_adc_probe(struct platform_device *pdev)
|
||||
{
|
||||
const struct of_device_id *match;
|
||||
struct cpcap_adc *ddata;
|
||||
struct iio_dev *indio_dev;
|
||||
int error;
|
||||
|
||||
match = of_match_device(of_match_ptr(cpcap_adc_id_table),
|
||||
&pdev->dev);
|
||||
if (!match)
|
||||
return -EINVAL;
|
||||
|
||||
if (!match->data) {
|
||||
dev_err(&pdev->dev, "no configuration data found\n");
|
||||
|
||||
return -ENODEV;
|
||||
}
|
||||
|
||||
indio_dev = devm_iio_device_alloc(&pdev->dev, sizeof(*ddata));
|
||||
if (!indio_dev) {
|
||||
dev_err(&pdev->dev, "failed to allocate iio device\n");
|
||||
|
@ -978,15 +966,15 @@ static int cpcap_adc_probe(struct platform_device *pdev)
|
|||
return -ENOMEM;
|
||||
}
|
||||
ddata = iio_priv(indio_dev);
|
||||
ddata->ato = match->data;
|
||||
ddata->ato = device_get_match_data(&pdev->dev);
|
||||
if (!ddata->ato)
|
||||
return -ENODEV;
|
||||
ddata->dev = &pdev->dev;
|
||||
|
||||
mutex_init(&ddata->lock);
|
||||
init_waitqueue_head(&ddata->wq_data_avail);
|
||||
|
||||
indio_dev->modes = INDIO_DIRECT_MODE | INDIO_BUFFER_SOFTWARE;
|
||||
indio_dev->dev.parent = &pdev->dev;
|
||||
indio_dev->dev.of_node = pdev->dev.of_node;
|
||||
indio_dev->channels = cpcap_adc_channels;
|
||||
indio_dev->num_channels = ARRAY_SIZE(cpcap_adc_channels);
|
||||
indio_dev->name = dev_name(&pdev->dev);
|
||||
|
@ -1029,7 +1017,7 @@ static int cpcap_adc_probe(struct platform_device *pdev)
|
|||
static struct platform_driver cpcap_adc_driver = {
|
||||
.driver = {
|
||||
.name = "cpcap_adc",
|
||||
.of_match_table = of_match_ptr(cpcap_adc_id_table),
|
||||
.of_match_table = cpcap_adc_id_table,
|
||||
},
|
||||
.probe = cpcap_adc_probe,
|
||||
};
|
||||
|
|
|
@ -354,8 +354,6 @@ static int da9150_gpadc_probe(struct platform_device *pdev)
|
|||
}
|
||||
|
||||
indio_dev->name = dev_name(dev);
|
||||
indio_dev->dev.parent = dev;
|
||||
indio_dev->dev.of_node = pdev->dev.of_node;
|
||||
indio_dev->info = &da9150_gpadc_info;
|
||||
indio_dev->modes = INDIO_DIRECT_MODE;
|
||||
indio_dev->channels = da9150_gpadc_channels;
|
||||
|
|
|
@ -524,10 +524,6 @@ static int dln2_adc_triggered_buffer_postenable(struct iio_dev *indio_dev)
|
|||
u16 conflict;
|
||||
unsigned int trigger_chan;
|
||||
|
||||
ret = iio_triggered_buffer_postenable(indio_dev);
|
||||
if (ret)
|
||||
return ret;
|
||||
|
||||
mutex_lock(&dln2->mutex);
|
||||
|
||||
/* Enable ADC */
|
||||
|
@ -541,7 +537,6 @@ static int dln2_adc_triggered_buffer_postenable(struct iio_dev *indio_dev)
|
|||
(int)conflict);
|
||||
ret = -EBUSY;
|
||||
}
|
||||
iio_triggered_buffer_predisable(indio_dev);
|
||||
return ret;
|
||||
}
|
||||
|
||||
|
@ -555,7 +550,6 @@ static int dln2_adc_triggered_buffer_postenable(struct iio_dev *indio_dev)
|
|||
mutex_unlock(&dln2->mutex);
|
||||
if (ret < 0) {
|
||||
dev_dbg(&dln2->pdev->dev, "Problem in %s\n", __func__);
|
||||
iio_triggered_buffer_predisable(indio_dev);
|
||||
return ret;
|
||||
}
|
||||
} else {
|
||||
|
@ -568,7 +562,7 @@ static int dln2_adc_triggered_buffer_postenable(struct iio_dev *indio_dev)
|
|||
|
||||
static int dln2_adc_triggered_buffer_predisable(struct iio_dev *indio_dev)
|
||||
{
|
||||
int ret, ret2;
|
||||
int ret;
|
||||
struct dln2_adc *dln2 = iio_priv(indio_dev);
|
||||
|
||||
mutex_lock(&dln2->mutex);
|
||||
|
@ -586,10 +580,6 @@ static int dln2_adc_triggered_buffer_predisable(struct iio_dev *indio_dev)
|
|||
if (ret < 0)
|
||||
dev_dbg(&dln2->pdev->dev, "Problem in %s\n", __func__);
|
||||
|
||||
ret2 = iio_triggered_buffer_predisable(indio_dev);
|
||||
if (ret == 0)
|
||||
ret = ret2;
|
||||
|
||||
return ret;
|
||||
}
|
||||
|
||||
|
@ -652,7 +642,6 @@ static int dln2_adc_probe(struct platform_device *pdev)
|
|||
IIO_CHAN_SOFT_TIMESTAMP_ASSIGN(dln2->iio_channels[i], i);
|
||||
|
||||
indio_dev->name = DLN2_ADC_MOD_NAME;
|
||||
indio_dev->dev.parent = dev;
|
||||
indio_dev->info = &dln2_adc_info;
|
||||
indio_dev->modes = INDIO_DIRECT_MODE;
|
||||
indio_dev->channels = dln2->iio_channels;
|
||||
|
|
|
@ -343,8 +343,6 @@ static int envelope_detector_probe(struct platform_device *pdev)
|
|||
INIT_DELAYED_WORK(&env->comp_timeout, envelope_detector_timeout);
|
||||
|
||||
indio_dev->name = dev_name(dev);
|
||||
indio_dev->dev.parent = dev;
|
||||
indio_dev->dev.of_node = dev->of_node;
|
||||
indio_dev->info = &envelope_detector_info;
|
||||
indio_dev->channels = &envelope_detector_iio_channel;
|
||||
indio_dev->num_channels = 1;
|
||||
|
|
|
@ -170,7 +170,6 @@ static int ep93xx_adc_probe(struct platform_device *pdev)
|
|||
return PTR_ERR(priv->base);
|
||||
}
|
||||
|
||||
iiodev->dev.parent = &pdev->dev;
|
||||
iiodev->name = dev_name(&pdev->dev);
|
||||
iiodev->modes = INDIO_DIRECT_MODE;
|
||||
iiodev->info = &ep93xx_adc_info;
|
||||
|
|
|
@ -867,8 +867,6 @@ static int exynos_adc_probe(struct platform_device *pdev)
|
|||
platform_set_drvdata(pdev, indio_dev);
|
||||
|
||||
indio_dev->name = dev_name(&pdev->dev);
|
||||
indio_dev->dev.parent = &pdev->dev;
|
||||
indio_dev->dev.of_node = pdev->dev.of_node;
|
||||
indio_dev->info = &exynos_adc_iio_info;
|
||||
indio_dev->modes = INDIO_DIRECT_MODE;
|
||||
indio_dev->channels = exynos_adc_iio_channels;
|
||||
|
|
|
@ -350,7 +350,6 @@ static int mx25_gcq_probe(struct platform_device *pdev)
|
|||
goto err_clk_unprepare;
|
||||
}
|
||||
|
||||
indio_dev->dev.parent = &pdev->dev;
|
||||
indio_dev->channels = mx25_gcq_channels;
|
||||
indio_dev->num_channels = ARRAY_SIZE(mx25_gcq_channels);
|
||||
indio_dev->info = &mx25_gcq_iio_info;
|
||||
|
|
|
@ -15,9 +15,7 @@
|
|||
#include <linux/iio/triggered_event.h>
|
||||
#include <linux/interrupt.h>
|
||||
#include <linux/module.h>
|
||||
#include <linux/of.h>
|
||||
#include <linux/of_device.h>
|
||||
#include <linux/of_gpio.h>
|
||||
#include <linux/mod_devicetable.h>
|
||||
#include <linux/spi/spi.h>
|
||||
#include <linux/gpio/consumer.h>
|
||||
|
||||
|
@ -488,8 +486,6 @@ static int hi8435_probe(struct spi_device *spi)
|
|||
spi_set_drvdata(spi, idev);
|
||||
mutex_init(&priv->lock);
|
||||
|
||||
idev->dev.parent = &spi->dev;
|
||||
idev->dev.of_node = spi->dev.of_node;
|
||||
idev->name = spi_get_device_id(spi)->name;
|
||||
idev->modes = INDIO_DIRECT_MODE;
|
||||
idev->info = &hi8435_info;
|
||||
|
@ -542,7 +538,7 @@ MODULE_DEVICE_TABLE(spi, hi8435_id);
|
|||
static struct spi_driver hi8435_driver = {
|
||||
.driver = {
|
||||
.name = DRV_NAME,
|
||||
.of_match_table = of_match_ptr(hi8435_dt_ids),
|
||||
.of_match_table = hi8435_dt_ids,
|
||||
},
|
||||
.probe = hi8435_probe,
|
||||
.id_table = hi8435_id,
|
||||
|
|
Some files were not shown because too many files have changed in this diff Show more
Loading…
Reference in a new issue