mirrors
/
linux-stable
mirror of https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git
1
0
Fork 0
Code Issues Releases Wiki Activity

spi: cadence: switch to use modern name 

Change legacy name master/slave to modern name host/target or controller.

No functional changed.

Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20230728093221.3312026-13-yangyingliang@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This commit is contained in:
Yang Yingliang 2023-07-28 17:32:12 +08:00 committed by Mark Brown
parent ec7cfadff2
commit f75c04a991
No known key found for this signature in database
GPG Key ID: 24D68B725D5487D0
1 changed files with 35 additions and 35 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

70
drivers/spi/spi-cadence.c
View File

@ -1,6 +1,6 @@
// SPDX-License-Identifier: GPL-2.0-or-later
/*
* Cadence SPI controller driver (master and slave mode)
* Cadence SPI controller driver (host and target mode)
*
* Copyright (C) 2008 - 2014 Xilinx, Inc.
*
@ -59,10 +59,10 @@
CDNS_SPI_CR_BAUD_DIV_4)
/*
* SPI Configuration Register - Baud rate and slave select
* SPI Configuration Register - Baud rate and target select
*
* These are the values used in the calculation of baud rate divisor and
* setting the slave select.
* setting the target select.
*/
#define CDNS_SPI_BAUD_DIV_MAX 7 /* Baud rate divisor maximum */
@ -141,20 +141,20 @@ static inline void cdns_spi_write(struct cdns_spi *xspi, u32 offset, u32 val)
/**
* cdns_spi_init_hw - Initialize the hardware and configure the SPI controller
* @xspi: Pointer to the cdns_spi structure
* @is_slave: Flag to indicate slave or master mode
* * On reset the SPI controller is configured to slave or master mode.
* In master mode baud rate divisor is set to 4, threshold value for TX FIFO
* @is_target: Flag to indicate target or host mode
* * On reset the SPI controller is configured to target or host mode.
* In host mode baud rate divisor is set to 4, threshold value for TX FIFO
* not full interrupt is set to 1 and size of the word to be transferred as 8 bit.
*
* This function initializes the SPI controller to disable and clear all the
* interrupts, enable manual slave select and manual start, deselect all the
* interrupts, enable manual target select and manual start, deselect all the
* chip select lines, and enable the SPI controller.
*/
static void cdns_spi_init_hw(struct cdns_spi *xspi, bool is_slave)
static void cdns_spi_init_hw(struct cdns_spi *xspi, bool is_target)
{
u32 ctrl_reg = 0;
if (!is_slave)
if (!is_target)
ctrl_reg |= CDNS_SPI_CR_DEFAULT;
if (xspi->is_decoded_cs)
@ -185,10 +185,10 @@ static void cdns_spi_chipselect(struct spi_device *spi, bool is_high)
ctrl_reg = cdns_spi_read(xspi, CDNS_SPI_CR);
if (is_high) {
/* Deselect the slave */
/* Deselect the target */
ctrl_reg |= CDNS_SPI_CR_SSCTRL;
} else {
/* Select the slave */
/* Select the target */
ctrl_reg &= ~CDNS_SPI_CR_SSCTRL;
if (!(xspi->is_decoded_cs))
ctrl_reg |= ((~(CDNS_SPI_SS0 << spi_get_chipselect(spi, 0))) <<
@ -227,7 +227,7 @@ static void cdns_spi_config_clock_mode(struct spi_device *spi)
/*
* Just writing the CR register does not seem to apply the clock
* setting changes. This is problematic when changing the clock
* polarity as it will cause the SPI slave to see spurious clock
* polarity as it will cause the SPI target to see spurious clock
* transitions. To workaround the issue toggle the ER register.
*/
cdns_spi_write(xspi, CDNS_SPI_ER, CDNS_SPI_ER_DISABLE);
@ -406,7 +406,7 @@ static irqreturn_t cdns_spi_irq(int irq, void *dev_id)
static int cdns_prepare_message(struct spi_controller *ctlr,
struct spi_message *msg)
{
if (!spi_controller_is_slave(ctlr))
if (!spi_controller_is_target(ctlr))
cdns_spi_config_clock_mode(msg->spi);
return 0;
}
@ -418,9 +418,9 @@ static int cdns_prepare_message(struct spi_controller *ctlr,
* @transfer: Pointer to the spi_transfer structure which provides
* information about next transfer parameters
*
* This function in master mode fills the TX FIFO, starts the SPI transfer and
* This function in host mode fills the TX FIFO, starts the SPI transfer and
* returns a positive transfer count so that core will wait for completion.
* This function in slave mode fills the TX FIFO and wait for transfer trigger.
* This function in target mode fills the TX FIFO and wait for transfer trigger.
*
* Return: Number of bytes transferred in the last transfer
*/
@ -435,7 +435,7 @@ static int cdns_transfer_one(struct spi_controller *ctlr,
xspi->tx_bytes = transfer->len;
xspi->rx_bytes = transfer->len;
if (!spi_controller_is_slave(ctlr)) {
if (!spi_controller_is_target(ctlr)) {
cdns_spi_setup_transfer(spi, transfer);
} else {
/* Set TX empty threshold to half of FIFO depth
@ -457,7 +457,7 @@ static int cdns_transfer_one(struct spi_controller *ctlr,
* @ctlr: Pointer to the spi_controller structure which provides
* information about the controller.
*
* This function enables SPI master controller.
* This function enables SPI host controller.
*
* Return: 0 always
*/
@ -475,7 +475,7 @@ static int cdns_prepare_transfer_hardware(struct spi_controller *ctlr)
* @ctlr: Pointer to the spi_controller structure which provides
* information about the controller.
*
* This function disables the SPI master controller when no slave selected.
* This function disables the SPI host controller when no target selected.
* This function flush out if any pending data in FIFO.
*
* Return: 0 always
@ -486,15 +486,15 @@ static int cdns_unprepare_transfer_hardware(struct spi_controller *ctlr)
u32 ctrl_reg;
unsigned int cnt = xspi->tx_fifo_depth;
if (spi_controller_is_slave(ctlr)) {
if (spi_controller_is_target(ctlr)) {
while (cnt--)
cdns_spi_read(xspi, CDNS_SPI_RXD);
}
/* Disable the SPI if slave is deselected */
/* Disable the SPI if target is deselected */
ctrl_reg = cdns_spi_read(xspi, CDNS_SPI_CR);
ctrl_reg = (ctrl_reg & CDNS_SPI_CR_SSCTRL) >> CDNS_SPI_SS_SHIFT;
if (ctrl_reg == CDNS_SPI_NOSS || spi_controller_is_slave(ctlr))
if (ctrl_reg == CDNS_SPI_NOSS || spi_controller_is_target(ctlr))
cdns_spi_write(xspi, CDNS_SPI_ER, CDNS_SPI_ER_DISABLE);
/* Reset to default */
@ -521,14 +521,14 @@ static void cdns_spi_detect_fifo_depth(struct cdns_spi *xspi)
}
/**
* cdns_slave_abort - Abort slave transfer
* cdns_target_abort - Abort target transfer
* @ctlr: Pointer to the spi_controller structure
*
* This function abort slave transfer if there any transfer timeout.
* This function abort target transfer if there any transfer timeout.
*
* Return: 0 always
*/
static int cdns_slave_abort(struct spi_controller *ctlr)
static int cdns_target_abort(struct spi_controller *ctlr)
{
struct cdns_spi *xspi = spi_controller_get_devdata(ctlr);
u32 intr_status;
@ -555,13 +555,13 @@ static int cdns_spi_probe(struct platform_device *pdev)
struct spi_controller *ctlr;
struct cdns_spi *xspi;
u32 num_cs;
bool slave;
bool target;
slave = of_property_read_bool(pdev->dev.of_node, "spi-slave");
if (slave)
ctlr = spi_alloc_slave(&pdev->dev, sizeof(*xspi));
target = of_property_read_bool(pdev->dev.of_node, "spi-slave");
if (target)
ctlr = spi_alloc_target(&pdev->dev, sizeof(*xspi));
else
ctlr = spi_alloc_master(&pdev->dev, sizeof(*xspi));
ctlr = spi_alloc_host(&pdev->dev, sizeof(*xspi));
if (!ctlr)
return -ENOMEM;
@ -589,7 +589,7 @@ static int cdns_spi_probe(struct platform_device *pdev)
goto remove_ctlr;
}
if (!spi_controller_is_slave(ctlr)) {
if (!spi_controller_is_target(ctlr)) {
xspi->ref_clk = devm_clk_get(&pdev->dev, "ref_clk");
if (IS_ERR(xspi->ref_clk)) {
dev_err(&pdev->dev, "ref_clk clock not found.\n");
@ -624,7 +624,7 @@ static int cdns_spi_probe(struct platform_device *pdev)
cdns_spi_detect_fifo_depth(xspi);
/* SPI controller initializations */
cdns_spi_init_hw(xspi, spi_controller_is_slave(ctlr));
cdns_spi_init_hw(xspi, spi_controller_is_target(ctlr));
irq = platform_get_irq(pdev, 0);
if (irq <= 0) {
@ -648,7 +648,7 @@ static int cdns_spi_probe(struct platform_device *pdev)
ctlr->mode_bits = SPI_CPOL | SPI_CPHA;
ctlr->bits_per_word_mask = SPI_BPW_MASK(8);
if (!spi_controller_is_slave(ctlr)) {
if (!spi_controller_is_target(ctlr)) {
ctlr->mode_bits |= SPI_CS_HIGH;
ctlr->set_cs = cdns_spi_chipselect;
ctlr->auto_runtime_pm = true;
@ -660,7 +660,7 @@ static int cdns_spi_probe(struct platform_device *pdev)
pm_runtime_put_autosuspend(&pdev->dev);
} else {
ctlr->mode_bits |= SPI_NO_CS;
ctlr->slave_abort = cdns_slave_abort;
ctlr->target_abort = cdns_target_abort;
}
ret = spi_register_controller(ctlr);
if (ret) {
@ -671,7 +671,7 @@ static int cdns_spi_probe(struct platform_device *pdev)
return ret;
clk_dis_all:
if (!spi_controller_is_slave(ctlr)) {
if (!spi_controller_is_target(ctlr)) {
pm_runtime_set_suspended(&pdev->dev);
pm_runtime_disable(&pdev->dev);
clk_disable_unprepare(xspi->ref_clk);
@ -735,7 +735,7 @@ static int __maybe_unused cdns_spi_resume(struct device *dev)
struct spi_controller *ctlr = dev_get_drvdata(dev);
struct cdns_spi *xspi = spi_controller_get_devdata(ctlr);
cdns_spi_init_hw(xspi, spi_controller_is_slave(ctlr));
cdns_spi_init_hw(xspi, spi_controller_is_target(ctlr));
return spi_controller_resume(ctlr);
}