mirrors
/
linux-stable
mirror of https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git
1
0
Fork 0
Code Issues Releases Wiki Activity

ARM: DT updates for v4.7 

These are all the updates to device tree files for 32-bit platforms,
 which as usual makes up the bulk of the ARM SoC changes: 462 non-merge
 changesets, 450 files changed, 23340 insertions, 5216 deletions.
 
 The three platforms that are added with the "soc" branch are here as well,
 and we add some related machine files:
 
 - For Aspeed AST2400/AST2500, we get the evaluation platform and
   the Tyan Palmetto POWER8 mainboard that uses the AST2400 BMC
 - For Oxnas 810SE, the Western Digital "My Book World Edition"
   is added as the only platform at the moment.
 - For ARM MPS2, the AN385 (Cortex-M3) and AN399 (Cortex-M7)
   are supported
 
 On the ARM Realview development platform, we now support all machines
 with device tree, previously only the board files were supported, which
 in turn will likely be removed soon.
 
 Qualcomm IPQ4019 is the second generation ARM based "Internet Processor",
 following the IPQ806x that is used in many high-end WiFi routers. This one
 integrates two ath10k wifi radios that were previously on separate chips.
 
 Other boards that got added for existing chips are:
 
 - On Ti OMAP family:
   - Amazon Kindle Fire, first generation, tablet and ebook reader
   - OnRISC Baltos iR 2110 and 3220 embedded industrial PCs
   - TI AM5728 IDK, TI AM3359 ICE-V2, and TI DRA722 Rev C EVM
     development systems
 
 - On Samsung EXYNOS platform:
   - Samsung ARTIK5 evaluation board, see
     https://www.artik.io/modules/overview/artik-5/
 
 - On NXP i.MX platforms:
   - Ka-Ro electronics TX6S-8034, TX6S-8035, TX6U-8033, TX6U-81xx,
     TX6Q-1036, TX6Q-1110/-1130, TXUL-0010 and TXUL-0011 industrial
     SoM modules
   - Embest MarS Board i.MX6Dual DIY platform
   - Boundary Devices i.MX6 Quad Plus Nitrogen6_MAX and
     SoloX Nitrogen6sx embedded boards
   - Technexion Pico i.MX6UL compute module
   - ZII VF610 Development Board
 
 - On Marvell embedded (mvebu, orion, kirkwood) platforms:
   - Linksys Viper (E4200v2 / EA4500) WiFi router
   - Buffalo Kurobox Pro NAS
 
 - On Qualcomm Snapdragon:
   - Arrow DragonBoard 600c (96boards) with APQ8064 Snapdragon 600
 
 - On Rockchips platform:
   - mqmaker MiQi single-board computer
 
 - On Altera SoCFPGA:
   - samtec VIN|ING 1000 vehicle communication interface
 
 - On Allwinner Sunxi platforms:
   - Dserve DSRV9703C tablet
   - Difrnce DIT4350 tablet
   - Colorfly E708 Q1 tablet
   - Polaroid MID2809PXE04 tablet
   - Olimex A20 OLinuXino LIME2 single board computer
   - Xunlong Orange Pi 2, Orange Pi One, and Orange Pi PC
     single board computers
 
 Across many platforms, bug fixes went in to address warnings that
 dtc now emits with 'make dtbs W=1'. Further changes for device enablement
 went into Ti OMAP, bcm283x (Raspberry Pi), bcm47xx (wifi router),
 Ti Davinci, Samsung EXYNOS, Marvell mvebu/kirkwood/orion, NXP i.MX/Vybrid
 NXP LPC18xx, NXP LPC32xx, Renesas shmobile/r-mobile/r-car, Rockchips
 rk3xxx, ST Ux500, ST STi, Atmel AT91/SAMA5, Altera SoCFPGA, Allwinner
 Sunxi, Sigma Designs Tango, NVIDIA Tegra, Socionext Uniphier and ARM
 Versatile Express.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIVAwUAVzuXhGCrR//JCVInAQJXjhAA1bV0fbREflRQrlXdMb4rNesygH8ikaja
 gOYHE1yO+tSitHZ5g4w2yAFIEK7DzFdO5rz53BEINZfLCj4LO4495/z9ipqZQEjC
 rw5IL89jAn8x4wF791SHjLpmmNRbHN2vjLcsX3ShJIHckip/jIbiU2aFJuohA0TU
 jxpPAZzhaKsu/rDaVzHMS/im4LbZQ2qI3DxUUn6Kt8c468i4Ns22sowqSjh2xO/X
 YiwHD0eAvDrySfMGiNT82wMMTfMF2KfXZGB885isMP4hK8OIDrOnI5nM9rxyRFfu
 N14o0+tN1S2JzBHnqOOpib6JxYyCVr+QTjsKGAyR5X1mGINIhX8f1gy0EvFFxXKT
 rIATc5VTeo4gc1quij8RVtDEp/4iJ8GspH4WGMh1F8tjTe+WUxeSMkxdf6/QY1+Q
 vZKT0KKihoJQu1xI62NjnaRbfbhwx2BSWehwgXVd72lD19dG5LPw+Nj6/8+Bgouc
 YxJahgkB9MMtHoNp8huMg33Gr9a07/yVxc4CztXtf7N9phd0nEXov2iM1aBgazLU
 8IVd3Z9lZA+4iGVcj3oBJ6K1IkiCmg2qoNyF6tcInR5vPjKLECuxyuZw8VKuUuHD
 k/s/rymSGRlDN5i4F0h0r4MvQ9gkYfwk8xiL3ofmwYHwo103Q7b7Cw55XRk88EoB
 appd5QA+pko=
 =Nx46
 -----END PGP SIGNATURE-----

Merge tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM DT updates from Arnd Bergmann:
 "These are all the updates to device tree files for 32-bit platforms,
  which as usual makes up the bulk of the ARM SoC changes: 462 non-merge
  changesets, 450 files changed, 23340 insertions, 5216 deletions.

  The three platforms that are added with the "soc" branch are here as
  well, and we add some related machine files:

   - For Aspeed AST2400/AST2500, we get the evaluation platform and the
     Tyan Palmetto POWER8 mainboard that uses the AST2400 BMC
   - For Oxnas 810SE, the Western Digital "My Book World Edition" is
     added as the only platform at the moment.
   - For ARM MPS2, the AN385 (Cortex-M3) and AN399 (Cortex-M7) are
     supported

  On the ARM Realview development platform, we now support all machines
  with device tree, previously only the board files were supported,
  which in turn will likely be removed soon.

  Qualcomm IPQ4019 is the second generation ARM based "Internet
  Processor", following the IPQ806x that is used in many high-end WiFi
  routers.  This one integrates two ath10k wifi radios that were
  previously on separate chips.

  Other boards that got added for existing chips are:

  Ti OMAP family:
     - Amazon Kindle Fire, first generation, tablet and ebook reader
     - OnRISC Baltos iR 2110 and 3220 embedded industrial PCs
     - TI AM5728 IDK, TI AM3359 ICE-V2, and TI DRA722 Rev C EVM
       development systems

  Samsung EXYNOS platform:
     - Samsung ARTIK5 evaluation board, see

        https://www.artik.io/modules/overview/artik-5/

  NXP i.MX platforms:
     - Ka-Ro electronics TX6S-8034, TX6S-8035, TX6U-8033, TX6U-81xx,
       TX6Q-1036, TX6Q-1110/-1130, TXUL-0010 and TXUL-0011 industrial
       SoM modules
     - Embest MarS Board i.MX6Dual DIY platform
     - Boundary Devices i.MX6 Quad Plus Nitrogen6_MAX and SoloX
       Nitrogen6sx embedded boards
     - Technexion Pico i.MX6UL compute module
     - ZII VF610 Development Board

  Marvell embedded (mvebu, orion, kirkwood) platforms:
     - Linksys Viper (E4200v2 / EA4500) WiFi router
     - Buffalo Kurobox Pro NAS

  Qualcomm Snapdragon:
     - Arrow DragonBoard 600c (96boards) with APQ8064 Snapdragon 600

  Rockchips platform:
     - mqmaker MiQi single-board computer

  Altera SoCFPGA:
     - samtec VIN|ING 1000 vehicle communication interface

  Allwinner Sunxi platforms:
     - Dserve DSRV9703C tablet
     - Difrnce DIT4350 tablet
     - Colorfly E708 Q1 tablet
     - Polaroid MID2809PXE04 tablet
     - Olimex A20 OLinuXino LIME2 single board computer
     - Xunlong Orange Pi 2, Orange Pi One, and Orange Pi PC single board
       computers

  Across many platforms, bug fixes went in to address warnings that dtc
  now emits with 'make dtbs W=1'.  Further changes for device enablement
  went into Ti OMAP, bcm283x (Raspberry Pi), bcm47xx (wifi router), Ti
  Davinci, Samsung EXYNOS, Marvell mvebu/kirkwood/orion, NXP i.MX/Vybrid
  NXP LPC18xx, NXP LPC32xx, Renesas shmobile/r-mobile/r-car, Rockchips
  rk3xxx, ST Ux500, ST STi, Atmel AT91/SAMA5, Altera SoCFPGA, Allwinner
  Sunxi, Sigma Designs Tango, NVIDIA Tegra, Socionext Uniphier and ARM
  Versatile Express"

* tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (458 commits)
  ARM: dts: tango4: Import watchdog node
  ARM: dts: tango4: Update cpus node for cpufreq
  ARM: dts: tango4: Update DT to match clk driver
  ARM: dts: tango4: Initial thermal support
  arm/dst: Add Aspeed ast2500 device tree
  arm/dts: Add Aspeed ast2400 device tree
  ARM: sun7i: dt: Add pll3 and pll7 clocks
  ARM: dts: sunxi: Add a olinuxino-lime2-emmc
  ARM: dts: at91: sama5d4: add trng node
  ARM: dts: at91: sama5d3: add trng node
  ARM: dts: at91: sama5d2: add trng node
  ARM: dts: at91: at91sam9g45 family: reduce the trng register map size
  ARM: sun4i: dt: Add pll3 and pll7 clocks
  ARM: sun5i: chip: Enable the TV Encoder
  ARM: sun5i: r8: Add display blocks to the DTSI
  ARM: sun5i: a13: Add display and TCON clocks
  ARM: dts: ux500: configure the accelerometers open drain
  ARM: mx5: dts: Enable USB OTG on M53EVK
  ARM: dts: imx6ul-14x14-evk: Add audio support
  ARM: dts: imx6qdl: Remove unneeded unit-addresses
  ...
This commit is contained in:
Linus Torvalds 2016-05-18 12:48:46 -07:00
parent 9f8f202278 ec42083b98
commit f7df9be067
448 changed files with 23100 additions and 5163 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

8
Documentation/devicetree/bindings/arm/arm-boards
View File

@ -93,6 +93,14 @@ Required nodes:
a core-module with regs and the compatible strings
"arm,core-module-versatile", "syscon"
Optional nodes:
- arm,versatile-ib2-syscon : if the Versatile has an IB2 interface
board mounted, this has a separate system controller that is
defined in this node.
Required properties:
compatible = "arm,versatile-ib2-syscon", "syscon"
ARM RealView Boards
-------------------
The RealView boards cover tailored evaluation boards that are used to explore

2
Documentation/devicetree/bindings/arm/atmel-at91.txt
View File

@ -159,7 +159,7 @@ elsewhere.
required properties:
- compatible: Should be "atmel,<chip>-sfr", "syscon".
<chip> can be "sama5d3" or "sama5d4".
<chip> can be "sama5d3", "sama5d4" or "sama5d2".
- reg: Should contain registers location and length
sfr@f0038000 {

6
Documentation/devicetree/bindings/arm/omap/omap.txt
View File

@ -133,6 +133,9 @@ Boards:
- AM335X Bone : Low cost community board
compatible = "ti,am335x-bone", "ti,am33xx", "ti,omap3"
- AM3359 ICEv2 : Low cost Industrial Communication Engine EVM.
compatible = "ti,am3359-icev2", "ti,am33xx", "ti,omap3"
- AM335X OrionLXm : Substation Automation Platform
compatible = "novatech,am335x-lxm", "ti,am33xx"
@ -169,6 +172,9 @@ Boards:
- AM57XX SBC-AM57x
compatible = "compulab,sbc-am57x", "compulab,cl-som-am57x", "ti,am5728", "ti,dra742", "ti,dra74", "ti,dra7"
- AM5728 IDK
compatible = "ti,am5728-idk", "ti,am5728", "ti,dra742", "ti,dra74", "ti,dra7"
- DRA742 EVM: Software Development Board for DRA742
compatible = "ti,dra7-evm", "ti,dra742", "ti,dra74", "ti,dra7"

9
Documentation/devicetree/bindings/arm/oxnas.txt Normal file
View File

@ -0,0 +1,9 @@
Oxford Semiconductor OXNAS SoCs Family device tree bindings
-------------------------------------------
Boards with the OX810SE SoC shall have the following properties:
Required root node property:
compatible: "oxsemi,ox810se"
Board compatible values:
- "wd,mbwe" (OX810SE)

4
Documentation/devicetree/bindings/arm/rockchip.txt
View File

@ -87,6 +87,10 @@ Rockchip platforms device tree bindings
"google,veyron-speedy-rev3", "google,veyron-speedy-rev2",
"google,veyron-speedy", "google,veyron", "rockchip,rk3288";
- mqmaker MiQi:
Required root node properties:
- compatible = "mqmaker,miqi", "rockchip,rk3288";
- Rockchip RK3368 evb:
Required root node properties:
- compatible = "rockchip,rk3368-evb-act8846", "rockchip,rk3368";

2
Documentation/devicetree/bindings/arm/samsung/samsung-boards.txt
View File

@ -2,6 +2,8 @@
Required root node properties:
- compatible = should be one or more of the following.
- "samsung,artik5" - for Exynos3250-based Samsung ARTIK5 module.
- "samsung,artik5-eval" - for Exynos3250-based Samsung ARTIK5 eval board.
- "samsung,monk" - for Exynos3250-based Samsung Simband board.
- "samsung,rinato" - for Exynos3250-based Samsung Gear2 board.
- "samsung,smdkv310" - for Exynos4210-based Samsung SMDKV310 eval board.

27
Documentation/devicetree/bindings/dma/fsl-imx-sdma.txt
View File

@ -58,6 +58,15 @@ The third cell specifies the transfer priority as below.
1 Medium
2 Low
Optional properties:
- gpr : The phandle to the General Purpose Register (GPR) node.
- fsl,sdma-event-remap : Register bits of sdma event remap, the format is
<reg shift val>.
reg is the GPR register offset.
shift is the bit position inside the GPR register.
val is the value of the bit (0 or 1).
Examples:
sdma@83fb0000 {
@ -83,3 +92,21 @@ ssi2: ssi@70014000 {
dma-names = "rx", "tx";
fsl,fifo-depth = <15>;
};
Using the fsl,sdma-event-remap property:
If we want to use SDMA on the SAI1 port on a MX6SX:
&sdma {
gpr = <&gpr>;
/* SDMA events remap for SAI1_RX and SAI1_TX */
fsl,sdma-event-remap = <0 15 1>, <0 16 1>;
};
The fsl,sdma-event-remap property in this case has two values:
- <0 15 1> means that the offset is 0, so GPR0 is the register of the
SDMA remap. Bit 15 of GPR0 selects between UART4_RX and SAI1_RX.
Setting bit 15 to 1 selects SAI1_RX.
- <0 16 1> means that the offset is 0, so GPR0 is the register of the
SDMA remap. Bit 16 of GPR0 selects between UART4_TX and SAI1_TX.
Setting bit 16 to 1 selects SAI1_TX.

2
Documentation/devicetree/bindings/interrupt-controller/arm,versatile-fpga-irq.txt
View File

@ -6,7 +6,7 @@ controllers are OR:ed together and fed to the CPU tile's IRQ input. Each
instance can handle up to 32 interrupts.
Required properties:
- compatible: "arm,versatile-fpga-irq"
- compatible: "arm,versatile-fpga-irq" or "oxsemi,ox810se-rps-irq"
- interrupt-controller: Identifies the node as an interrupt controller
- #interrupt-cells: The number of cells to define the interrupts. Must be 1
as the FPGA IRQ controller has no configuration options for interrupt

4
Documentation/devicetree/bindings/interrupt-controller/brcm,bcm2835-armctrl-ic.txt
View File

@ -71,8 +71,8 @@ Bank 1:
24: DMA8
25: DMA9
26: DMA10
27: DMA11
28: DMA12
27: DMA11-14 - shared interrupt for DMA 11 to 14
28: DMAALL - triggers on all dma interrupts (including chanel 15)
29: AUX
30: ARM
31: VPUDMA

70
Documentation/devicetree/bindings/interrupt-controller/nxp,lpc3220-mic.txt
View File

@ -1,38 +1,60 @@
* NXP LPC32xx Main Interrupt Controller
(MIC, including SIC1 and SIC2 secondary controllers)
* NXP LPC32xx MIC, SIC1 and SIC2 Interrupt Controllers
Required properties:
- compatible: Should be "nxp,lpc3220-mic"
- interrupt-controller: Identifies the node as an interrupt controller.
- interrupt-parent: Empty for the interrupt controller itself
- #interrupt-cells: The number of cells to define the interrupts. Should be 2.
The first cell is the IRQ number
The second cell is used to specify mode:
1 = low-to-high edge triggered
2 = high-to-low edge triggered
4 = active high level-sensitive
8 = active low level-sensitive
Default for internal sources should be set to 4 (active high).
- reg: Should contain MIC registers location and length
- compatible: "nxp,lpc3220-mic" or "nxp,lpc3220-sic".
- reg: should contain IC registers location and length.
- interrupt-controller: identifies the node as an interrupt controller.
- #interrupt-cells: the number of cells to define an interrupt, should be 2.
The first cell is the IRQ number, the second cell is used to specify
one of the supported IRQ types:
IRQ_TYPE_EDGE_RISING = low-to-high edge triggered,
IRQ_TYPE_EDGE_FALLING = high-to-low edge triggered,
IRQ_TYPE_LEVEL_HIGH = active high level-sensitive,
IRQ_TYPE_LEVEL_LOW = active low level-sensitive.
Reset value is IRQ_TYPE_LEVEL_LOW.
Optional properties:
- interrupt-parent: empty for MIC interrupt controller, link to parent
MIC interrupt controller for SIC1 and SIC2
- interrupts: empty for MIC interrupt controller, cascaded MIC
hardware interrupts for SIC1 and SIC2
Examples:
/*
* MIC
*/
/* LPC32xx MIC, SIC1 and SIC2 interrupt controllers */
mic: interrupt-controller@40008000 {
compatible = "nxp,lpc3220-mic";
reg = <0x40008000 0x4000>;
interrupt-controller;
interrupt-parent;
#interrupt-cells = <2>;
reg = <0x40008000 0xC000>;
};
/*
* ADC
*/
sic1: interrupt-controller@4000c000 {
compatible = "nxp,lpc3220-sic";
reg = <0x4000c000 0x4000>;
interrupt-controller;
#interrupt-cells = <2>;
interrupt-parent = <&mic>;
interrupts = <0 IRQ_TYPE_LEVEL_LOW>,
<30 IRQ_TYPE_LEVEL_LOW>;
};
sic2: interrupt-controller@40010000 {
compatible = "nxp,lpc3220-sic";
reg = <0x40010000 0x4000>;
interrupt-controller;
#interrupt-cells = <2>;
interrupt-parent = <&mic>;
interrupts = <1 IRQ_TYPE_LEVEL_LOW>,
<31 IRQ_TYPE_LEVEL_LOW>;
};
/* ADC */
adc@40048000 {
compatible = "nxp,lpc3220-adc";
reg = <0x40048000 0x1000>;
interrupt-parent = <&mic>;
interrupts = <39 4>;
interrupt-parent = <&sic1>;
interrupts = <7 IRQ_TYPE_LEVEL_HIGH>;
};

2
Documentation/devicetree/bindings/phy/phy-lpc18xx-usb-otg.txt
View File

@ -18,7 +18,7 @@ creg: syscon@40043000 {
compatible = "nxp,lpc1850-creg", "syscon", "simple-mfd";
reg = <0x40043000 0x1000>;
usb0_otg_phy: phy@004 {
usb0_otg_phy: phy {
compatible = "nxp,lpc1850-usb-otg-phy";
clocks = <&ccu1 CLK_USB0>;
#phy-cells = <0>;

48
Documentation/devicetree/bindings/power/renesas,rcar-sysc.txt Normal file
View File

@ -0,0 +1,48 @@
DT bindings for the Renesas R-Car System Controller
== System Controller Node ==
The R-Car System Controller provides power management for the CPU cores and
various coprocessors.
Required properties:
- compatible: Must contain exactly one of the following:
- "renesas,r8a7779-sysc" (R-Car H1)
- "renesas,r8a7790-sysc" (R-Car H2)
- "renesas,r8a7791-sysc" (R-Car M2-W)
- "renesas,r8a7792-sysc" (R-Car V2H)
- "renesas,r8a7793-sysc" (R-Car M2-N)
- "renesas,r8a7794-sysc" (R-Car E2)
- "renesas,r8a7795-sysc" (R-Car H3)
- reg: Address start and address range for the device.
- #power-domain-cells: Must be 1.
Example:
sysc: system-controller@e6180000 {
compatible = "renesas,r8a7791-sysc";
reg = <0 0xe6180000 0 0x0200>;
#power-domain-cells = <1>;
};
== PM Domain Consumers ==
Devices residing in a power area must refer to that power area, as documented
by the generic PM domain bindings in
Documentation/devicetree/bindings/power/power_domain.txt.
Required properties:
- power-domains: A phandle and symbolic PM domain specifier, as defined in
<dt-bindings/power/r8a77*-sysc.h>.
Example:
L2_CA15: cache-controller@0 {
compatible = "cache";
power-domains = <&sysc R8A7791_PD_CA15_SCU>;
cache-unified;
cache-level = <2>;
};

21
Documentation/devicetree/bindings/soc/mediatek/auxadc.txt Normal file
View File

@ -0,0 +1,21 @@
MediaTek AUXADC
===============
The Auxiliary Analog/Digital Converter (AUXADC) is an ADC found
in some Mediatek SoCs which among other things measures the temperatures
in the SoC. It can be used directly with register accesses, but it is also
used by thermal controller which reads the temperatures from the AUXADC
directly via its own bus interface. See
Documentation/devicetree/bindings/thermal/mediatek-thermal.txt
for the Thermal Controller which holds a phandle to the AUXADC.
Required properties:
- compatible: Must be "mediatek,mt8173-auxadc"
- reg: Address range of the AUXADC unit
Example:
auxadc: auxadc@11001000 {
compatible = "mediatek,mt8173-auxadc";
reg = <0 0x11001000 0 0x1000>;
};

1
Documentation/devicetree/bindings/soc/mediatek/pwrap.txt
View File

@ -18,6 +18,7 @@ IP Pairing
Required properties in pwrap device node.
- compatible:
"mediatek,mt2701-pwrap" for MT2701/7623 SoCs
"mediatek,mt8135-pwrap" for MT8135 SoCs
"mediatek,mt8173-pwrap" for MT8173 SoCs
- interrupts: IRQ for pwrap in SOC

35
Documentation/devicetree/bindings/soc/rockchip/grf.txt Normal file
View File

@ -0,0 +1,35 @@
* Rockchip General Register Files (GRF)
The general register file will be used to do static set by software, which
is composed of many registers for system control.
From RK3368 SoCs, the GRF is divided into two sections,
- GRF, used for general non-secure system,
- PMUGRF, used for always on system
Required Properties:
- compatible: GRF should be one of the followings
- "rockchip,rk3066-grf", "syscon": for rk3066
- "rockchip,rk3188-grf", "syscon": for rk3188
- "rockchip,rk3228-grf", "syscon": for rk3228
- "rockchip,rk3288-grf", "syscon": for rk3288
- "rockchip,rk3368-grf", "syscon": for rk3368
- "rockchip,rk3399-grf", "syscon": for rk3399
- compatible: PMUGRF should be one of the followings
- "rockchip,rk3368-pmugrf", "syscon": for rk3368
- "rockchip,rk3399-pmugrf", "syscon": for rk3399
- reg: physical base address of the controller and length of memory mapped
region.
Example: GRF and PMUGRF of RK3399 SoCs
pmugrf: syscon@ff320000 {
compatible = "rockchip,rk3399-pmugrf", "syscon";
reg = <0x0 0xff320000 0x0 0x1000>;
};
grf: syscon@ff770000 {
compatible = "rockchip,rk3399-grf", "syscon";
reg = <0x0 0xff770000 0x0 0x10000>;
};

7
Documentation/devicetree/bindings/spi/ti_qspi.txt
View File

@ -19,6 +19,13 @@ Optional properties:
- syscon-chipselects: Handle to system control region contains QSPI
chipselect register and offset of that register.
NOTE: TI QSPI controller requires different pinmux and IODelay
paramaters for Mode-0 and Mode-3 operations, which needs to be set up by
the bootloader (U-Boot). Default configuration only supports Mode-0
operation. Hence, "spi-cpol" and "spi-cpha" DT properties cannot be
specified in the slave nodes of TI QSPI controller without appropriate
modification to bootloader.
Example:
For am4372:

6
Documentation/devicetree/bindings/vendor-prefixes.txt
View File

@ -16,6 +16,7 @@ al Annapurna Labs
allwinner Allwinner Technology Co., Ltd.
alphascale AlphaScale Integrated Circuits Systems, Inc.
altr Altera Corp.
amazon Amazon.com, Inc.
amcc Applied Micro Circuits Corporation (APM, formally AMCC)
amd Advanced Micro Devices (AMD), Inc.
amlogic Amlogic, Inc.
@ -29,6 +30,7 @@ arm ARM Ltd.
armadeus ARMadeus Systems SARL
artesyn Artesyn Embedded Technologies Inc.
asahi-kasei Asahi Kasei Corp.
aspeed ASPEED Technology Inc.
atlas Atlas Scientific LLC
atmel Atmel Corporation
auo AU Optronics Corporation
@ -152,6 +154,7 @@ mitsubishi Mitsubishi Electric Corporation
mosaixtech Mosaix Technologies, Inc.
moxa Moxa
mpl MPL AG
mqmaker mqmaker Inc.
msi Micro-Star International Co. Ltd.
mti Imagination Technologies Ltd. (formerly MIPS Technologies Inc.)
mundoreader Mundo Reader S.L.
@ -177,6 +180,7 @@ option Option NV
ortustech Ortus Technology Co., Ltd.
ovti OmniVision Technologies
ORCL Oracle Corporation
oxsemi Oxford Semiconductor, Ltd.
panasonic Panasonic Corporation
parade Parade Technologies Inc.
pericom Pericom Technology Inc.
@ -250,6 +254,7 @@ tplink TP-LINK Technologies Co., Ltd.
tronfy Tronfy
tronsmart Tronsmart
truly Truly Semiconductors Limited
tyan Tyan Computer Corporation
upisemi uPI Semiconductor Corp.
urt United Radiant Technology Corporation
usi Universal Scientific Industrial Co., Ltd.
@ -259,6 +264,7 @@ via VIA Technologies, Inc.
virtio Virtual I/O Device Specification, developed by the OASIS consortium
vivante Vivante Corporation
voipac Voipac Technologies s.r.o.
wd Western Digital Corp.
wexler Wexler
winbond Winbond Electronics corp.
wlf Wolfson Microelectronics

2
MAINTAINERS
View File

@ -1271,7 +1271,7 @@ M: Santosh Shilimkar <ssantosh@kernel.org>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
S: Maintained
F: arch/arm/mach-keystone/
F: arch/arm/boot/dts/k2*
F: arch/arm/boot/dts/keystone-*
T: git git://git.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux-keystone.git
ARM/TEXAS INSTRUMENT KEYSTONE CLOCK FRAMEWORK

67
arch/arm/boot/dts/Makefile
View File

@ -112,6 +112,7 @@ dtb-$(CONFIG_ARCH_DIGICOLOR) += \
dtb-$(CONFIG_ARCH_EFM32) += \
efm32gg-dk3750.dtb
dtb-$(CONFIG_ARCH_EXYNOS3) += \
exynos3250-artik5-eval.dtb \
exynos3250-monk.dtb \
exynos3250-rinato.dtb
dtb-$(CONFIG_ARCH_EXYNOS4) += \
@ -158,9 +159,9 @@ dtb-$(CONFIG_ARCH_INTEGRATOR) += \
integratorap.dtb \
integratorcp.dtb
dtb-$(CONFIG_ARCH_KEYSTONE) += \
k2hk-evm.dtb \
k2l-evm.dtb \
k2e-evm.dtb \
keystone-k2hk-evm.dtb \
keystone-k2l-evm.dtb \
keystone-k2e-evm.dtb \
keystone-k2g-evm.dtb
dtb-$(CONFIG_MACH_KIRKWOOD) += \
kirkwood-b3.dtb \
@ -177,6 +178,7 @@ dtb-$(CONFIG_MACH_KIRKWOOD) += \
kirkwood-ds109.dtb \
kirkwood-ds110jv10.dtb \
kirkwood-ds111.dtb \
kirkwood-ds112.dtb \
kirkwood-ds209.dtb \
kirkwood-ds210.dtb \
kirkwood-ds212.dtb \
@ -199,6 +201,7 @@ dtb-$(CONFIG_MACH_KIRKWOOD) += \
kirkwood-linkstation-lswsxl.dtb \
kirkwood-linkstation-lswvl.dtb \
kirkwood-linkstation-lswxl.dtb \
kirkwood-linksys-viper.dtb \
kirkwood-lschlv2.dtb \
kirkwood-lsxhl.dtb \
kirkwood-mplcec4.dtb \
@ -214,6 +217,7 @@ dtb-$(CONFIG_MACH_KIRKWOOD) += \
kirkwood-ns2mini.dtb \
kirkwood-nsa310.dtb \
kirkwood-nsa310a.dtb \
kirkwood-nsa320.dtb \
kirkwood-nsa325.dtb \
kirkwood-openblocks_a6.dtb \
kirkwood-openblocks_a7.dtb \
@ -241,7 +245,8 @@ dtb-$(CONFIG_ARCH_LPC18XX) += \
lpc4350-hitex-eval.dtb \
lpc4357-ea4357-devkit.dtb
dtb-$(CONFIG_ARCH_LPC32XX) += \
ea3250.dtb phy3250.dtb
lpc3250-ea3250.dtb \
lpc3250-phy3250.dtb
dtb-$(CONFIG_MACH_MESON6) += \
meson6-atv1200.dtb
dtb-$(CONFIG_MACH_MESON8) += \
@ -253,6 +258,9 @@ dtb-$(CONFIG_ARCH_MMP) += \
dtb-$(CONFIG_MACH_MESON8B) += \
meson8b-mxq.dtb \
meson8b-odroidc1.dtb
dtb-$(CONFIG_ARCH_MPS2) += \
mps2-an385.dtb \
mps2-an399.dtb
dtb-$(CONFIG_ARCH_MOXART) += \
moxart-uc7112lx.dtb
dtb-$(CONFIG_SOC_IMX1) += \
@ -320,8 +328,12 @@ dtb-$(CONFIG_SOC_IMX6Q) += \
imx6dl-sabrelite.dtb \
imx6dl-sabresd.dtb \
imx6dl-tx6dl-comtft.dtb \
imx6dl-tx6s-8034.dtb \
imx6dl-tx6s-8035.dtb \
imx6dl-tx6u-801x.dtb \
imx6dl-tx6u-8033.dtb \
imx6dl-tx6u-811x.dtb \
imx6dl-tx6u-81xx-mb7.dtb \
imx6dl-udoo.dtb \
imx6dl-wandboard.dtb \
imx6dl-wandboard-revb1.dtb \
@ -346,6 +358,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \
imx6q-gw552x.dtb \
imx6q-hummingboard.dtb \
imx6q-icore-rqs.dtb \
imx6q-marsboard.dtb \
imx6q-nitrogen6x.dtb \
imx6q-nitrogen6_max.dtb \
imx6q-novena.dtb \
@ -360,21 +373,30 @@ dtb-$(CONFIG_SOC_IMX6Q) += \
imx6q-tx6q-1010-comtft.dtb \
imx6q-tx6q-1020.dtb \
imx6q-tx6q-1020-comtft.dtb \
imx6q-tx6q-1036.dtb \
imx6q-tx6q-1110.dtb \
imx6q-tx6q-11x0-mb7.dtb \
imx6q-udoo.dtb \
imx6q-wandboard.dtb \
imx6q-wandboard-revb1.dtb \
imx6qp-nitrogen6_max.dtb \
imx6qp-sabreauto.dtb \
imx6qp-sabresd.dtb
dtb-$(CONFIG_SOC_IMX6SL) += \
imx6sl-evk.dtb \
imx6sl-warp.dtb
dtb-$(CONFIG_SOC_IMX6SX) += \
imx6sx-nitrogen6sx.dtb \
imx6sx-sabreauto.dtb \
imx6sx-sdb-reva.dtb \
imx6sx-sdb-sai.dtb \
imx6sx-sdb.dtb
dtb-$(CONFIG_SOC_IMX6UL) += \
imx6ul-14x14-evk.dtb
imx6ul-14x14-evk.dtb \
imx6ul-pico-hobbit.dtb \
imx6ul-tx6ul-0010.dtb \
imx6ul-tx6ul-0011.dtb \
imx6ul-tx6ul-mainboard.dtb
dtb-$(CONFIG_SOC_IMX7D) += \
imx7d-cl-som-imx7.dtb \
imx7d-sbc-imx7.dtb \
@ -388,7 +410,8 @@ dtb-$(CONFIG_SOC_VF610) += \
vf610m4-colibri.dtb \
vf610-cosmic.dtb \
vf610m4-cosmic.dtb \
vf610-twr.dtb
vf610-twr.dtb \
vf610-zii-dev-rev-b.dtb
dtb-$(CONFIG_ARCH_MXS) += \
imx23-evk.dtb \
imx23-olinuxino.dtb \
@ -485,6 +508,8 @@ dtb-$(CONFIG_SOC_TI81XX) += \
dm8168-evm.dtb \
dra62x-j5eco-evm.dtb
dtb-$(CONFIG_SOC_AM33XX) += \
am335x-baltos-ir2110.dtb \
am335x-baltos-ir3220.dtb \
am335x-baltos-ir5221.dtb \
am335x-base0033.dtb \
am335x-bone.dtb \
@ -494,6 +519,7 @@ dtb-$(CONFIG_SOC_AM33XX) += \
am335x-cm-t335.dtb \
am335x-evm.dtb \
am335x-evmsk.dtb \
am335x-icev2.dtb \
am335x-lxm.dtb \
am335x-nano.dtb \
am335x-pepper.dtb \
@ -503,6 +529,7 @@ dtb-$(CONFIG_SOC_AM33XX) += \
am335x-wega-rdk.dtb
dtb-$(CONFIG_ARCH_OMAP4) += \
omap4-duovero-parlor.dtb \
omap4-kc1.dtb \
omap4-panda.dtb \
omap4-panda-a4.dtb \
omap4-panda-es.dtb \
@ -526,9 +553,12 @@ dtb-$(CONFIG_SOC_DRA7XX) += \
am57xx-beagle-x15.dtb \
am57xx-cl-som-am57x.dtb \
am57xx-sbc-am57x.dtb \
am572x-idk.dtb \
dra7-evm.dtb \
dra72-evm.dtb
dra72-evm.dtb \
dra72-evm-revc.dtb
dtb-$(CONFIG_ARCH_ORION5X) += \
orion5x-kuroboxpro.dtb \
orion5x-lacie-d2-network.dtb \
orion5x-lacie-ethernet-disk-mini-v2.dtb \
orion5x-linkstation-lsgl.dtb \
@ -538,7 +568,10 @@ dtb-$(CONFIG_ARCH_ORION5X) += \
orion5x-rd88f5182-nas.dtb
dtb-$(CONFIG_ARCH_PRIMA2) += \
prima2-evb.dtb
dtb-$(CONFIG_ARCH_OXNAS) += \
wd-mbwe.dtb
dtb-$(CONFIG_ARCH_QCOM) += \
qcom-apq8064-arrow-db600c.dtb \
qcom-apq8064-cm-qs600.dtb \
qcom-apq8064-ifc6410.dtb \
qcom-apq8064-sony-xperia-yuga.dtb \
@ -546,13 +579,20 @@ dtb-$(CONFIG_ARCH_QCOM) += \
qcom-apq8074-dragonboard.dtb \
qcom-apq8084-ifc6540.dtb \
qcom-apq8084-mtp.dtb \
qcom-ipq4019-ap.dk01.1-c1.dtb \
qcom-ipq8064-ap148.dtb \
qcom-msm8660-surf.dtb \
qcom-msm8960-cdp.dtb \
qcom-msm8974-sony-xperia-honami.dtb
dtb-$(CONFIG_ARCH_REALVIEW) += \
arm-realview-pb1176.dtb \
arm-realview-pb11mp.dtb
arm-realview-pb11mp.dtb \
arm-realview-eb.dtb \
arm-realview-eb-11mp.dtb \
arm-realview-eb-11mp-revb.dtb \
arm-realview-eb-a9mp.dtb \
arm-realview-pba8.dtb \
arm-realview-pbx-a9.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += \
rk3036-evb.dtb \
rk3036-kylin.dtb \
@ -565,6 +605,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += \
rk3288-evb-rk808.dtb \
rk3288-firefly-beta.dtb \
rk3288-firefly.dtb \
rk3288-miqi.dtb \
rk3288-popmetal.dtb \
rk3288-r89.dtb \
rk3288-rock2-square.dtb \
@ -608,6 +649,7 @@ dtb-$(CONFIG_ARCH_SOCFPGA) += \
socfpga_cyclone5_de0_sockit.dtb \
socfpga_cyclone5_sockit.dtb \
socfpga_cyclone5_socrates.dtb \
socfpga_cyclone5_vining_fpga.dtb \
socfpga_vt.dtb
dtb-$(CONFIG_ARCH_SPEAR13XX) += \
spear1310-evb.dtb \
@ -637,6 +679,7 @@ dtb-$(CONFIG_MACH_SUN4I) += \
sun4i-a10-ba10-tvbox.dtb \
sun4i-a10-chuwi-v7-cw0825.dtb \
sun4i-a10-cubieboard.dtb \
sun4i-a10-dserve-dsrv9703c.dtb \
sun4i-a10-gemei-g9.dtb \
sun4i-a10-hackberry.dtb \
sun4i-a10-hyundai-a7hd.dtb \
@ -660,6 +703,7 @@ dtb-$(CONFIG_MACH_SUN5I) += \
sun5i-a10s-olinuxino-micro.dtb \
sun5i-a10s-r7-tv-dongle.dtb \
sun5i-a10s-wobo-i5.dtb \
sun5i-a13-difrnce-dit4350.dtb \
sun5i-a13-empire-electronix-d709.dtb \
sun5i-a13-hsg-h702.dtb \
sun5i-a13-inet-98v-rev2.dtb \
@ -675,6 +719,7 @@ dtb-$(CONFIG_MACH_SUN6I) += \
sun6i-a31-i7.dtb \
sun6i-a31-m9.dtb \
sun6i-a31-mele-a1000g-quad.dtb \
sun6i-a31s-colorfly-e708-q1.dtb \
sun6i-a31s-cs908.dtb \
sun6i-a31s-primo81.dtb \
sun6i-a31s-sina31s.dtb \
@ -707,6 +752,7 @@ dtb-$(CONFIG_MACH_SUN8I) += \
sun8i-a23-gt90h-v4.dtb \
sun8i-a23-ippo-q8h-v5.dtb \
sun8i-a23-ippo-q8h-v1.2.dtb \
sun8i-a23-polaroid-mid2809pxe04.dtb \
sun8i-a23-q8-tablet.dtb \
sun8i-a33-et-q8-v1.6.dtb \
sun8i-a33-ga10h-v1.1.dtb \
@ -715,6 +761,9 @@ dtb-$(CONFIG_MACH_SUN8I) += \
sun8i-a33-sinlinx-sina33.dtb \
sun8i-a83t-allwinner-h8homlet-v2.dtb \
sun8i-a83t-cubietruck-plus.dtb \
sun8i-h3-orangepi-2.dtb \
sun8i-h3-orangepi-one.dtb \
sun8i-h3-orangepi-pc.dtb \
sun8i-h3-orangepi-plus.dtb
dtb-$(CONFIG_MACH_SUN9I) += \
sun9i-a80-optimus.dtb \
@ -839,6 +888,8 @@ dtb-$(CONFIG_ARCH_MEDIATEK) += \
mt8127-moose.dtb \
mt8135-evbp1.dtb
dtb-$(CONFIG_ARCH_ZX) += zx296702-ad1.dtb
dtb-$(CONFIG_ARCH_ASPEED) += aspeed-bmc-opp-palmetto.dtb \
aspeed-ast2500-evb.dtb
endif
dtstree := $(srctree)/$(src)

71
arch/arm/boot/dts/am335x-baltos-ir2110.dts Normal file
View File

@ -0,0 +1,71 @@
/*
* Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
/*
* VScom OnRISC
* http://www.vscom.de
*/
/dts-v1/;
#include "am335x-baltos.dtsi"
/ {
model = "OnRISC Baltos iR 2110";
};
&am33xx_pinmux {
uart1_pins: pinmux_uart1_pins {
pinctrl-single,pins = <
AM33XX_IOPAD(0x980, PIN_INPUT | MUX_MODE0) /* uart1_rxd */
AM33XX_IOPAD(0x984, PIN_INPUT | MUX_MODE0) /* uart1_txd */
AM33XX_IOPAD(0x978, PIN_INPUT_PULLDOWN | MUX_MODE0) /* uart1_ctsn */
AM33XX_IOPAD(0x97c, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart1_rtsn */
AM33XX_IOPAD(0x8e0, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* lcd_vsync.gpio2[22] DTR */
AM33XX_IOPAD(0x8e4, PIN_INPUT_PULLDOWN | MUX_MODE7) /* lcd_hsync.gpio2[23] DSR */
AM33XX_IOPAD(0x8e8, PIN_INPUT_PULLDOWN | MUX_MODE7) /* lcd_pclk.gpio2[24] DCD */
AM33XX_IOPAD(0x8ec, PIN_INPUT_PULLDOWN | MUX_MODE7) /* lcd_ac_bias_en.gpio2[25] RI */
>;
};
};
&uart1 {
pinctrl-names = "default";
pinctrl-0 = <&uart1_pins>;
dtr-gpios = <&gpio2 22 GPIO_ACTIVE_LOW>;
dsr-gpios = <&gpio2 23 GPIO_ACTIVE_LOW>;
dcd-gpios = <&gpio2 24 GPIO_ACTIVE_LOW>;
rng-gpios = <&gpio2 25 GPIO_ACTIVE_LOW>;
status = "okay";
};
&usb0_phy {
status = "okay";
};
&usb0 {
status = "okay";
dr_mode = "host";
};
&cpsw_emac0 {
phy_id = <&davinci_mdio>, <1>;
phy-mode = "rmii";
dual_emac_res_vlan = <1>;
};
&cpsw_emac1 {
phy_id = <&davinci_mdio>, <7>;
phy-mode = "rgmii-txid";
dual_emac_res_vlan = <2>;
};
&phy_sel {
rmii-clock-ext = <1>;
};

119
arch/arm/boot/dts/am335x-baltos-ir3220.dts Normal file
View File

@ -0,0 +1,119 @@
/*
* Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
/*
* VScom OnRISC
* http://www.vscom.de
*/
/dts-v1/;
#include "am335x-baltos.dtsi"
/ {
model = "OnRISC Baltos iR 3220";
};
&am33xx_pinmux {
tca6416_pins: pinmux_tca6416_pins {
pinctrl-single,pins = <
AM33XX_IOPAD(0x9b4, PIN_INPUT_PULLUP | MUX_MODE7) /* xdma_event_intr1.gpio0[20] tca6416 stuff */
>;
};
uart1_pins: pinmux_uart1_pins {
pinctrl-single,pins = <
AM33XX_IOPAD(0x980, PIN_INPUT | MUX_MODE0) /* uart1_rxd */
AM33XX_IOPAD(0x984, PIN_INPUT | MUX_MODE0) /* uart1_txd */
AM33XX_IOPAD(0x978, PIN_INPUT_PULLDOWN | MUX_MODE0) /* uart1_ctsn */
AM33XX_IOPAD(0x97c, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart1_rtsn */
AM33XX_IOPAD(0x8e0, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* lcd_vsync.gpio2[22] DTR */
AM33XX_IOPAD(0x8e4, PIN_INPUT_PULLDOWN | MUX_MODE7) /* lcd_hsync.gpio2[23] DSR */
AM33XX_IOPAD(0x8e8, PIN_INPUT_PULLDOWN | MUX_MODE7) /* lcd_pclk.gpio2[24] DCD */
AM33XX_IOPAD(0x8ec, PIN_INPUT_PULLDOWN | MUX_MODE7) /* lcd_ac_bias_en.gpio2[25] RI */
>;
};
uart2_pins: pinmux_uart2_pins {
pinctrl-single,pins = <
AM33XX_IOPAD(0x950, PIN_INPUT | MUX_MODE1) /* spi0_sclk.uart2_rxd_mux3 */
AM33XX_IOPAD(0x954, PIN_OUTPUT | MUX_MODE1) /* spi0_d0.uart2_txd_mux3 */
AM33XX_IOPAD(0x988, PIN_INPUT_PULLDOWN | MUX_MODE2) /* i2c0_sda.uart2_ctsn_mux0 */
AM33XX_IOPAD(0x98c, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* i2c0_scl.uart2_rtsn_mux0 */
AM33XX_IOPAD(0x830, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad12.gpio1[12] DTR */
AM33XX_IOPAD(0x834, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad13.gpio1[13] DSR */
AM33XX_IOPAD(0x838, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad14.gpio1[14] DCD */
AM33XX_IOPAD(0x83c, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad15.gpio1[15] RI */
AM33XX_IOPAD(0x9a0, PIN_INPUT_PULLUP | MUX_MODE7) /* mcasp0_aclkr.gpio3[18], INPUT_PULLDOWN | MODE7 */
>;
};
};
&uart1 {
pinctrl-names = "default";
pinctrl-0 = <&uart1_pins>;
dtr-gpios = <&gpio2 22 GPIO_ACTIVE_LOW>;
dsr-gpios = <&gpio2 23 GPIO_ACTIVE_LOW>;
dcd-gpios = <&gpio2 24 GPIO_ACTIVE_LOW>;
rng-gpios = <&gpio2 25 GPIO_ACTIVE_LOW>;
status = "okay";
};
&uart2 {
pinctrl-names = "default";
pinctrl-0 = <&uart2_pins>;
dtr-gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
dsr-gpios = <&gpio1 13 GPIO_ACTIVE_LOW>;
dcd-gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
rng-gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
status = "okay";
};
&i2c1 {
tca6416: gpio@20 {
compatible = "ti,tca6416";
reg = <0x20>;
gpio-controller;
#gpio-cells = <2>;
interrupt-parent = <&gpio0>;
interrupts = <20 GPIO_ACTIVE_LOW>;
pinctrl-names = "default";
pinctrl-0 = <&tca6416_pins>;
};
};
&usb0_phy {
status = "okay";
};
&usb0 {
status = "okay";
dr_mode = "host";
};
&cpsw_emac0 {
phy-mode = "rmii";
dual_emac_res_vlan = <1>;
fixed-link {
speed = <100>;
full-duplex;
};
};
&cpsw_emac1 {
phy_id = <&davinci_mdio>, <7>;
phy-mode = "rgmii-txid";
dual_emac_res_vlan = <2>;
};
&phy_sel {
rmii-clock-ext = <1>;
};

398
arch/arm/boot/dts/am335x-baltos-ir5221.dts
View File

@ -13,83 +13,19 @@
/dts-v1/;
#include "am33xx.dtsi"
#include <dt-bindings/pwm/pwm.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include "am335x-baltos.dtsi"
/ {
model = "OnRISC Baltos iR 5221";
compatible = "vscom,onrisc", "ti,am33xx";
cpus {
cpu@0 {
cpu0-supply = <&vdd1_reg>;
};
};
memory {
device_type = "memory";
reg = <0x80000000 0x10000000>; /* 256 MB */
};
vbat: fixedregulator@0 {
compatible = "regulator-fixed";
regulator-name = "vbat";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
regulator-boot-on;
};
wl12xx_vmmc: fixedregulator@2 {
pinctrl-names = "default";
pinctrl-0 = <&wl12xx_gpio>;
compatible = "regulator-fixed";
regulator-name = "vwl1271";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
gpio = <&gpio3 8 0>;
startup-delay-us = <70000>;
enable-active-high;
};
};
&am33xx_pinmux {
mmc2_pins: pinmux_mmc2_pins {
pinctrl-single,pins = <
AM33XX_IOPAD(0x820, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_ad8.mmc1_dat0_mux0 */
AM33XX_IOPAD(0x824, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_ad9.mmc1_dat1_mux0 */
AM33XX_IOPAD(0x828, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_ad10.mmc1_dat2_mux0 */
AM33XX_IOPAD(0x82c, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_ad11.mmc1_dat3_mux0 */
AM33XX_IOPAD(0x880, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn1.mmc1_clk_mux0 */
AM33XX_IOPAD(0x884, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn2.mmc1_cmd_mux0 */
AM33XX_IOPAD(0x9e4, PIN_INPUT_PULLUP | MUX_MODE7) /* emu0.gpio3[7] */
>;
};
wl12xx_gpio: pinmux_wl12xx_gpio {
pinctrl-single,pins = <
AM33XX_IOPAD(0x9e8, PIN_OUTPUT_PULLUP | MUX_MODE7) /* emu1.gpio3[8] */
>;
};
tps65910_pins: pinmux_tps65910_pins {
pinctrl-single,pins = <
AM33XX_IOPAD(0x878, PIN_INPUT_PULLUP | MUX_MODE7) /* gpmc_ben1.gpio1[28] */
>;
};
tca6416_pins: pinmux_tca6416_pins {
pinctrl-single,pins = <
AM33XX_IOPAD(0x9b4, PIN_INPUT_PULLUP | MUX_MODE7) /* xdma_event_intr1.gpio0[20] tca6416 stuff */
>;
};
i2c1_pins: pinmux_i2c1_pins {
pinctrl-single,pins = <
AM33XX_IOPAD(0x958, PIN_INPUT | MUX_MODE2) /* spi0_d1.i2c1_sda_mux3 */
AM33XX_IOPAD(0x95c, PIN_INPUT | MUX_MODE2) /* spi0_cs0.i2c1_scl_mux3 */
>;
};
dcan1_pins: pinmux_dcan1_pins {
pinctrl-single,pins = <
@ -98,19 +34,12 @@
>;
};
uart0_pins: pinmux_uart0_pins {
pinctrl-single,pins = <
AM33XX_IOPAD(0x970, PIN_INPUT_PULLUP | MUX_MODE0) /* uart0_rxd.uart0_rxd */
AM33XX_IOPAD(0x974, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart0_txd.uart0_txd */
>;
};
uart1_pins: pinmux_uart1_pins {
pinctrl-single,pins = <
AM33XX_IOPAD(0x980, PIN_INPUT | MUX_MODE0) /* uart1_rxd */
AM33XX_IOPAD(0x984, PIN_INPUT | MUX_MODE0) /* uart1_txd */
AM33XX_IOPAD(0x978, PIN_INPUT_PULLDOWN | MUX_MODE7) /* uart1_ctsn, INPUT | MODE0 */
AM33XX_IOPAD(0x97c, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* uart1_rtsn, OUTPUT | MODE0 */
AM33XX_IOPAD(0x978, PIN_INPUT_PULLDOWN | MUX_MODE0) /* uart1_ctsn */
AM33XX_IOPAD(0x97c, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart1_rtsn */
AM33XX_IOPAD(0x8e0, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* lcd_vsync.gpio2[22] DTR */
AM33XX_IOPAD(0x8e4, PIN_INPUT_PULLDOWN | MUX_MODE7) /* lcd_hsync.gpio2[23] DSR */
AM33XX_IOPAD(0x8e8, PIN_INPUT_PULLDOWN | MUX_MODE7) /* lcd_pclk.gpio2[24] DCD */
@ -122,8 +51,8 @@
pinctrl-single,pins = <
AM33XX_IOPAD(0x950, PIN_INPUT | MUX_MODE1) /* spi0_sclk.uart2_rxd_mux3 */
AM33XX_IOPAD(0x954, PIN_OUTPUT | MUX_MODE1) /* spi0_d0.uart2_txd_mux3 */
AM33XX_IOPAD(0x988, PIN_INPUT_PULLDOWN | MUX_MODE7) /* i2c0_sda.uart2_ctsn_mux0 */
AM33XX_IOPAD(0x98c, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* i2c0_scl.uart2_rtsn_mux0 */
AM33XX_IOPAD(0x988, PIN_INPUT_PULLDOWN | MUX_MODE2) /* i2c0_sda.uart2_ctsn_mux0 */
AM33XX_IOPAD(0x98c, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* i2c0_scl.uart2_rtsn_mux0 */
AM33XX_IOPAD(0x830, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad12.gpio1[12] DTR */
AM33XX_IOPAD(0x834, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad13.gpio1[13] DSR */
AM33XX_IOPAD(0x838, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad14.gpio1[14] DCD */
@ -133,151 +62,6 @@
>;
};
cpsw_default: cpsw_default {
pinctrl-single,pins = <
/* Slave 1 */
AM33XX_IOPAD(0x90c, PIN_INPUT_PULLDOWN | MUX_MODE1) /* mii1_crs.rmii1_crs_dv */
AM33XX_IOPAD(0x914, PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* mii1_tx_en.rmii1_txen */
AM33XX_IOPAD(0x924, PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* mii1_txd1.rmii1_txd1 */
AM33XX_IOPAD(0x928, PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* mii1_txd0.rmii1_txd0 */
AM33XX_IOPAD(0x93c, PIN_INPUT_PULLDOWN | MUX_MODE1) /* mii1_rxd1.rmii1_rxd1 */
AM33XX_IOPAD(0x940, PIN_INPUT_PULLDOWN | MUX_MODE1) /* mii1_rxd0.rmii1_rxd0 */
AM33XX_IOPAD(0x944, PIN_INPUT_PULLDOWN | MUX_MODE0) /* rmii1_ref_clk.rmii1_refclk */
/* Slave 2 */
AM33XX_IOPAD(0x840, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* gpmc_a0.rgmii2_tctl */
AM33XX_IOPAD(0x844, PIN_INPUT_PULLDOWN | MUX_MODE2) /* gpmc_a1.rgmii2_rctl */
AM33XX_IOPAD(0x848, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* gpmc_a2.rgmii2_td3 */
AM33XX_IOPAD(0x84c, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* gpmc_a3.rgmii2_td2 */
AM33XX_IOPAD(0x850, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* gpmc_a4.rgmii2_td1 */
AM33XX_IOPAD(0x854, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* gpmc_a5.rgmii2_td0 */
AM33XX_IOPAD(0x858, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* gpmc_a6.rgmii2_tclk */
AM33XX_IOPAD(0x85c, PIN_INPUT_PULLDOWN | MUX_MODE2) /* gpmc_a7.rgmii2_rclk */
AM33XX_IOPAD(0x860, PIN_INPUT_PULLDOWN | MUX_MODE2) /* gpmc_a8.rgmii2_rd3 */
AM33XX_IOPAD(0x864, PIN_INPUT_PULLDOWN | MUX_MODE2) /* gpmc_a9.rgmii2_rd2 */
AM33XX_IOPAD(0x868, PIN_INPUT_PULLDOWN | MUX_MODE2) /* gpmc_a10.rgmii2_rd1 */
AM33XX_IOPAD(0x86c, PIN_INPUT_PULLDOWN | MUX_MODE2) /* gpmc_a11.rgmii2_rd0 */
>;
};
cpsw_sleep: cpsw_sleep {
pinctrl-single,pins = <
/* Slave 1 reset value */
AM33XX_IOPAD(0x90c, PIN_INPUT_PULLDOWN | MUX_MODE7)
AM33XX_IOPAD(0x914, PIN_INPUT_PULLDOWN | MUX_MODE7)
AM33XX_IOPAD(0x924, PIN_INPUT_PULLDOWN | MUX_MODE7)
AM33XX_IOPAD(0x928, PIN_INPUT_PULLDOWN | MUX_MODE7)
AM33XX_IOPAD(0x93c, PIN_INPUT_PULLDOWN | MUX_MODE7)
AM33XX_IOPAD(0x940, PIN_INPUT_PULLDOWN | MUX_MODE7)
AM33XX_IOPAD(0x944, PIN_INPUT_PULLDOWN | MUX_MODE7)
/* Slave 2 reset value*/
AM33XX_IOPAD(0x840, PIN_INPUT_PULLDOWN | MUX_MODE7)
AM33XX_IOPAD(0x844, PIN_INPUT_PULLDOWN | MUX_MODE7)
AM33XX_IOPAD(0x848, PIN_INPUT_PULLDOWN | MUX_MODE7)
AM33XX_IOPAD(0x84c, PIN_INPUT_PULLDOWN | MUX_MODE7)
AM33XX_IOPAD(0x850, PIN_INPUT_PULLDOWN | MUX_MODE7)
AM33XX_IOPAD(0x854, PIN_INPUT_PULLDOWN | MUX_MODE7)
AM33XX_IOPAD(0x858, PIN_INPUT_PULLDOWN | MUX_MODE7)
AM33XX_IOPAD(0x85c, PIN_INPUT_PULLDOWN | MUX_MODE7)
AM33XX_IOPAD(0x860, PIN_INPUT_PULLDOWN | MUX_MODE7)
AM33XX_IOPAD(0x864, PIN_INPUT_PULLDOWN | MUX_MODE7)
AM33XX_IOPAD(0x868, PIN_INPUT_PULLDOWN | MUX_MODE7)
AM33XX_IOPAD(0x86c, PIN_INPUT_PULLDOWN | MUX_MODE7)
>;
};
davinci_mdio_default: davinci_mdio_default {
pinctrl-single,pins = <
/* MDIO */
AM33XX_IOPAD(0x948, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* mdio_data.mdio_data */
AM33XX_IOPAD(0x94c, PIN_OUTPUT_PULLUP | MUX_MODE0) /* mdio_clk.mdio_clk */
>;
};
davinci_mdio_sleep: davinci_mdio_sleep {
pinctrl-single,pins = <
/* MDIO reset value */
AM33XX_IOPAD(0x948, PIN_INPUT_PULLDOWN | MUX_MODE7)
AM33XX_IOPAD(0x94c, PIN_INPUT_PULLDOWN | MUX_MODE7)
>;
};
nandflash_pins_s0: nandflash_pins_s0 {
pinctrl-single,pins = <
AM33XX_IOPAD(0x800, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad0.gpmc_ad0 */
AM33XX_IOPAD(0x804, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad1.gpmc_ad1 */
AM33XX_IOPAD(0x808, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad2.gpmc_ad2 */
AM33XX_IOPAD(0x80c, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad3.gpmc_ad3 */
AM33XX_IOPAD(0x810, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad4.gpmc_ad4 */
AM33XX_IOPAD(0x814, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad5.gpmc_ad5 */
AM33XX_IOPAD(0x818, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad6.gpmc_ad6 */
AM33XX_IOPAD(0x81c, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad7.gpmc_ad7 */
AM33XX_IOPAD(0x870, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_wait0.gpmc_wait0 */
AM33XX_IOPAD(0x874, PIN_INPUT_PULLUP | MUX_MODE7) /* gpmc_wpn.gpio0_30 */
AM33XX_IOPAD(0x87c, PIN_OUTPUT | MUX_MODE0) /* gpmc_csn0.gpmc_csn0 */
AM33XX_IOPAD(0x890, PIN_OUTPUT | MUX_MODE0) /* gpmc_advn_ale.gpmc_advn_ale */
AM33XX_IOPAD(0x894, PIN_OUTPUT | MUX_MODE0) /* gpmc_oen_ren.gpmc_oen_ren */
AM33XX_IOPAD(0x898, PIN_OUTPUT | MUX_MODE0) /* gpmc_wen.gpmc_wen */
AM33XX_IOPAD(0x89c, PIN_OUTPUT | MUX_MODE0) /* gpmc_be0n_cle.gpmc_be0n_cle */
>;
};
};
&elm {
status = "okay";
};
&gpmc {
pinctrl-names = "default";
pinctrl-0 = <&nandflash_pins_s0>;
ranges = <0 0 0x08000000 0x10000000>; /* CS0: NAND */
status = "okay";
nand@0,0 {
compatible = "ti,omap2-nand";
reg = <0 0 4>; /* CS0, offset 0, IO size 4 */
interrupt-parent = <&gpmc>;
interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
<1 IRQ_TYPE_NONE>; /* termcount */
nand-bus-width = <8>;
ti,nand-ecc-opt = "bch8";
ti,nand-xfer-type = "polled";
gpmc,device-nand = "true";
gpmc,device-width = <1>;
gpmc,sync-clk-ps = <0>;
gpmc,cs-on-ns = <0>;
gpmc,cs-rd-off-ns = <44>;
gpmc,cs-wr-off-ns = <44>;
gpmc,adv-on-ns = <6>;
gpmc,adv-rd-off-ns = <34>;
gpmc,adv-wr-off-ns = <44>;
gpmc,we-on-ns = <0>;
gpmc,we-off-ns = <40>;
gpmc,oe-on-ns = <0>;
gpmc,oe-off-ns = <54>;
gpmc,access-ns = <64>;
gpmc,rd-cycle-ns = <82>;
gpmc,wr-cycle-ns = <82>;
gpmc,bus-turnaround-ns = <0>;
gpmc,cycle2cycle-delay-ns = <0>;
gpmc,clk-activation-ns = <0>;
gpmc,wr-access-ns = <40>;
gpmc,wr-data-mux-bus-ns = <0>;
#address-cells = <1>;
#size-cells = <1>;
elm_id = <&elm>;
};
};
&uart0 {
pinctrl-names = "default";
pinctrl-0 = <&uart0_pins>;
status = "okay";
};
&uart1 {
@ -287,8 +71,6 @@
dsr-gpios = <&gpio2 23 GPIO_ACTIVE_LOW>;
dcd-gpios = <&gpio2 24 GPIO_ACTIVE_LOW>;
rng-gpios = <&gpio2 25 GPIO_ACTIVE_LOW>;
cts-gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
rts-gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
status = "okay";
};
@ -300,35 +82,11 @@
dsr-gpios = <&gpio1 13 GPIO_ACTIVE_LOW>;
dcd-gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
rng-gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
cts-gpios = <&gpio3 5 GPIO_ACTIVE_LOW>;
rts-gpios = <&gpio3 6 GPIO_ACTIVE_LOW>;
status = "okay";
};
&i2c1 {
pinctrl-names = "default";
pinctrl-0 = <&i2c1_pins>;
status = "okay";
clock-frequency = <400000>;
tps: tps@2d {
reg = <0x2d>;
gpio-controller;
#gpio-cells = <2>;
interrupt-parent = <&gpio1>;
interrupts = <28 GPIO_ACTIVE_LOW>;
pinctrl-names = "default";
pinctrl-0 = <&tps65910_pins>;
};
at24@50 {
compatible = "at24,24c02";
pagesize = <8>;
reg = <0x50>;
};
tca6416: gpio@20 {
compatible = "ti,tca6416";
reg = <0x20>;
@ -341,14 +99,6 @@
};
};
&usb {
status = "okay";
};
&usb_ctrl_mod {
status = "okay";
};
&usb0_phy {
status = "okay";
};
@ -367,108 +117,6 @@
dr_mode = "otg";
};
&cppi41dma {
status = "okay";
};
#include "tps65910.dtsi"
&tps {
vcc1-supply = <&vbat>;
vcc2-supply = <&vbat>;
vcc3-supply = <&vbat>;
vcc4-supply = <&vbat>;
vcc5-supply = <&vbat>;
vcc6-supply = <&vbat>;
vcc7-supply = <&vbat>;
vccio-supply = <&vbat>;
ti,en-ck32k-xtal = <1>;
regulators {
vrtc_reg: regulator@0 {
regulator-always-on;
};
vio_reg: regulator@1 {
regulator-always-on;
};
vdd1_reg: regulator@2 {
/* VDD_MPU voltage limits 0.95V - 1.26V with +/-4% tolerance */
regulator-name = "vdd_mpu";
regulator-min-microvolt = <912500>;
regulator-max-microvolt = <1312500>;
regulator-boot-on;
regulator-always-on;
};
vdd2_reg: regulator@3 {
/* VDD_CORE voltage limits 0.95V - 1.1V with +/-4% tolerance */
regulator-name = "vdd_core";
regulator-min-microvolt = <912500>;
regulator-max-microvolt = <1150000>;
regulator-boot-on;
regulator-always-on;
};
vdd3_reg: regulator@4 {
regulator-always-on;
};
vdig1_reg: regulator@5 {
regulator-always-on;
};
vdig2_reg: regulator@6 {
regulator-always-on;
};
vpll_reg: regulator@7 {
regulator-always-on;
};
vdac_reg: regulator@8 {
regulator-always-on;
};
vaux1_reg: regulator@9 {
regulator-always-on;
};
vaux2_reg: regulator@10 {
regulator-always-on;
};
vaux33_reg: regulator@11 {
regulator-always-on;
};
vmmc_reg: regulator@12 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
};
};
};
&mac {
pinctrl-names = "default", "sleep";
pinctrl-0 = <&cpsw_default>;
pinctrl-1 = <&cpsw_sleep>;
dual_emac = <1>;
status = "okay";
};
&davinci_mdio {
pinctrl-names = "default", "sleep";
pinctrl-0 = <&davinci_mdio_default>;
pinctrl-1 = <&davinci_mdio_sleep>;
status = "okay";
};
&cpsw_emac0 {
phy-mode = "rmii";
dual_emac_res_vlan = <1>;
@ -488,42 +136,6 @@
rmii-clock-ext = <1>;
};
&mmc1 {
vmmc-supply = <&vmmc_reg>;
status = "okay";
};
&mmc2 {
status = "okay";
vmmc-supply = <&wl12xx_vmmc>;
ti,non-removable;
bus-width = <4>;
cap-power-off-card;
pinctrl-names = "default";
pinctrl-0 = <&mmc2_pins>;
#address-cells = <1>;
#size-cells = <0>;
wlcore: wlcore@2 {
compatible = "ti,wl1835";
reg = <2>;
interrupt-parent = <&gpio3>;
interrupts = <7 IRQ_TYPE_LEVEL_HIGH>;
};
};
&sham {
status = "okay";
};
&aes {
status = "okay";
};
&gpio0 {
ti,no-reset-on-init;
};
&dcan1 {
pinctrl-names = "default";
pinctrl-0 = <&dcan1_pins>;

408
arch/arm/boot/dts/am335x-baltos.dtsi Normal file
View File

@ -0,0 +1,408 @@
/*
* Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
/*
* VScom OnRISC
* http://www.vscom.de
*/
#include "am33xx.dtsi"
#include <dt-bindings/pwm/pwm.h>
#include <dt-bindings/interrupt-controller/irq.h>
/ {
compatible = "vscom,onrisc", "ti,am33xx";
cpus {
cpu@0 {
cpu0-supply = <&vdd1_reg>;
};
};
memory {
device_type = "memory";
reg = <0x80000000 0x10000000>; /* 256 MB */
};
vbat: fixedregulator@0 {
compatible = "regulator-fixed";
regulator-name = "vbat";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
regulator-boot-on;
};
wl12xx_vmmc: fixedregulator@2 {
pinctrl-names = "default";
pinctrl-0 = <&wl12xx_gpio>;
compatible = "regulator-fixed";
regulator-name = "vwl1271";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
gpio = <&gpio3 8 0>;
startup-delay-us = <70000>;
enable-active-high;
};
};
&am33xx_pinmux {
mmc2_pins: pinmux_mmc2_pins {
pinctrl-single,pins = <
AM33XX_IOPAD(0x820, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_ad8.mmc1_dat0_mux0 */
AM33XX_IOPAD(0x824, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_ad9.mmc1_dat1_mux0 */
AM33XX_IOPAD(0x828, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_ad10.mmc1_dat2_mux0 */
AM33XX_IOPAD(0x82c, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_ad11.mmc1_dat3_mux0 */
AM33XX_IOPAD(0x880, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn1.mmc1_clk_mux0 */
AM33XX_IOPAD(0x884, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn2.mmc1_cmd_mux0 */
AM33XX_IOPAD(0x9e4, PIN_INPUT_PULLUP | MUX_MODE7) /* emu0.gpio3[7] */
>;
};
wl12xx_gpio: pinmux_wl12xx_gpio {
pinctrl-single,pins = <
AM33XX_IOPAD(0x9e8, PIN_OUTPUT_PULLUP | MUX_MODE7) /* emu1.gpio3[8] */
>;
};
tps65910_pins: pinmux_tps65910_pins {
pinctrl-single,pins = <
AM33XX_IOPAD(0x878, PIN_INPUT_PULLUP | MUX_MODE7) /* gpmc_ben1.gpio1[28] */
>;
};
i2c1_pins: pinmux_i2c1_pins {
pinctrl-single,pins = <
AM33XX_IOPAD(0x958, PIN_INPUT | MUX_MODE2) /* spi0_d1.i2c1_sda_mux3 */
AM33XX_IOPAD(0x95c, PIN_INPUT | MUX_MODE2) /* spi0_cs0.i2c1_scl_mux3 */
>;
};
uart0_pins: pinmux_uart0_pins {
pinctrl-single,pins = <
AM33XX_IOPAD(0x970, PIN_INPUT_PULLUP | MUX_MODE0) /* uart0_rxd.uart0_rxd */
AM33XX_IOPAD(0x974, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart0_txd.uart0_txd */
>;
};
cpsw_default: cpsw_default {
pinctrl-single,pins = <
/* Slave 1 */
AM33XX_IOPAD(0x90c, PIN_INPUT_PULLDOWN | MUX_MODE1) /* mii1_crs.rmii1_crs_dv */
AM33XX_IOPAD(0x914, PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* mii1_tx_en.rmii1_txen */
AM33XX_IOPAD(0x924, PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* mii1_txd1.rmii1_txd1 */
AM33XX_IOPAD(0x928, PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* mii1_txd0.rmii1_txd0 */
AM33XX_IOPAD(0x93c, PIN_INPUT_PULLDOWN | MUX_MODE1) /* mii1_rxd1.rmii1_rxd1 */
AM33XX_IOPAD(0x940, PIN_INPUT_PULLDOWN | MUX_MODE1) /* mii1_rxd0.rmii1_rxd0 */
AM33XX_IOPAD(0x944, PIN_INPUT_PULLDOWN | MUX_MODE0) /* rmii1_ref_clk.rmii1_refclk */
/* Slave 2 */
AM33XX_IOPAD(0x840, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* gpmc_a0.rgmii2_tctl */
AM33XX_IOPAD(0x844, PIN_INPUT_PULLDOWN | MUX_MODE2) /* gpmc_a1.rgmii2_rctl */
AM33XX_IOPAD(0x848, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* gpmc_a2.rgmii2_td3 */
AM33XX_IOPAD(0x84c, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* gpmc_a3.rgmii2_td2 */
AM33XX_IOPAD(0x850, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* gpmc_a4.rgmii2_td1 */
AM33XX_IOPAD(0x854, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* gpmc_a5.rgmii2_td0 */
AM33XX_IOPAD(0x858, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* gpmc_a6.rgmii2_tclk */
AM33XX_IOPAD(0x85c, PIN_INPUT_PULLDOWN | MUX_MODE2) /* gpmc_a7.rgmii2_rclk */
AM33XX_IOPAD(0x860, PIN_INPUT_PULLDOWN | MUX_MODE2) /* gpmc_a8.rgmii2_rd3 */
AM33XX_IOPAD(0x864, PIN_INPUT_PULLDOWN | MUX_MODE2) /* gpmc_a9.rgmii2_rd2 */
AM33XX_IOPAD(0x868, PIN_INPUT_PULLDOWN | MUX_MODE2) /* gpmc_a10.rgmii2_rd1 */
AM33XX_IOPAD(0x86c, PIN_INPUT_PULLDOWN | MUX_MODE2) /* gpmc_a11.rgmii2_rd0 */
>;
};
cpsw_sleep: cpsw_sleep {
pinctrl-single,pins = <
/* Slave 1 reset value */
AM33XX_IOPAD(0x90c, PIN_INPUT_PULLDOWN | MUX_MODE7)
AM33XX_IOPAD(0x914, PIN_INPUT_PULLDOWN | MUX_MODE7)
AM33XX_IOPAD(0x924, PIN_INPUT_PULLDOWN | MUX_MODE7)
AM33XX_IOPAD(0x928, PIN_INPUT_PULLDOWN | MUX_MODE7)
AM33XX_IOPAD(0x93c, PIN_INPUT_PULLDOWN | MUX_MODE7)
AM33XX_IOPAD(0x940, PIN_INPUT_PULLDOWN | MUX_MODE7)
AM33XX_IOPAD(0x944, PIN_INPUT_PULLDOWN | MUX_MODE7)
/* Slave 2 reset value*/
AM33XX_IOPAD(0x840, PIN_INPUT_PULLDOWN | MUX_MODE7)
AM33XX_IOPAD(0x844, PIN_INPUT_PULLDOWN | MUX_MODE7)
AM33XX_IOPAD(0x848, PIN_INPUT_PULLDOWN | MUX_MODE7)
AM33XX_IOPAD(0x84c, PIN_INPUT_PULLDOWN | MUX_MODE7)
AM33XX_IOPAD(0x850, PIN_INPUT_PULLDOWN | MUX_MODE7)
AM33XX_IOPAD(0x854, PIN_INPUT_PULLDOWN | MUX_MODE7)
AM33XX_IOPAD(0x858, PIN_INPUT_PULLDOWN | MUX_MODE7)
AM33XX_IOPAD(0x85c, PIN_INPUT_PULLDOWN | MUX_MODE7)
AM33XX_IOPAD(0x860, PIN_INPUT_PULLDOWN | MUX_MODE7)
AM33XX_IOPAD(0x864, PIN_INPUT_PULLDOWN | MUX_MODE7)
AM33XX_IOPAD(0x868, PIN_INPUT_PULLDOWN | MUX_MODE7)
AM33XX_IOPAD(0x86c, PIN_INPUT_PULLDOWN | MUX_MODE7)
>;
};
davinci_mdio_default: davinci_mdio_default {
pinctrl-single,pins = <
/* MDIO */
AM33XX_IOPAD(0x948, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* mdio_data.mdio_data */
AM33XX_IOPAD(0x94c, PIN_OUTPUT_PULLUP | MUX_MODE0) /* mdio_clk.mdio_clk */
>;
};
davinci_mdio_sleep: davinci_mdio_sleep {
pinctrl-single,pins = <
/* MDIO reset value */
AM33XX_IOPAD(0x948, PIN_INPUT_PULLDOWN | MUX_MODE7)
AM33XX_IOPAD(0x94c, PIN_INPUT_PULLDOWN | MUX_MODE7)
>;
};
nandflash_pins_s0: nandflash_pins_s0 {
pinctrl-single,pins = <
AM33XX_IOPAD(0x800, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad0.gpmc_ad0 */
AM33XX_IOPAD(0x804, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad1.gpmc_ad1 */
AM33XX_IOPAD(0x808, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad2.gpmc_ad2 */
AM33XX_IOPAD(0x80c, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad3.gpmc_ad3 */
AM33XX_IOPAD(0x810, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad4.gpmc_ad4 */
AM33XX_IOPAD(0x814, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad5.gpmc_ad5 */
AM33XX_IOPAD(0x818, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad6.gpmc_ad6 */
AM33XX_IOPAD(0x81c, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad7.gpmc_ad7 */
AM33XX_IOPAD(0x870, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_wait0.gpmc_wait0 */
AM33XX_IOPAD(0x874, PIN_INPUT_PULLUP | MUX_MODE7) /* gpmc_wpn.gpio0_30 */
AM33XX_IOPAD(0x87c, PIN_OUTPUT | MUX_MODE0) /* gpmc_csn0.gpmc_csn0 */
AM33XX_IOPAD(0x890, PIN_OUTPUT | MUX_MODE0) /* gpmc_advn_ale.gpmc_advn_ale */
AM33XX_IOPAD(0x894, PIN_OUTPUT | MUX_MODE0) /* gpmc_oen_ren.gpmc_oen_ren */
AM33XX_IOPAD(0x898, PIN_OUTPUT | MUX_MODE0) /* gpmc_wen.gpmc_wen */
AM33XX_IOPAD(0x89c, PIN_OUTPUT | MUX_MODE0) /* gpmc_be0n_cle.gpmc_be0n_cle */
>;
};
};
&elm {
status = "okay";
};
&gpmc {
pinctrl-names = "default";
pinctrl-0 = <&nandflash_pins_s0>;
ranges = <0 0 0x08000000 0x10000000>; /* CS0: NAND */
status = "okay";
nand@0,0 {
compatible = "ti,omap2-nand";
reg = <0 0 4>; /* CS0, offset 0, IO size 4 */
interrupt-parent = <&gpmc>;
interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
<1 IRQ_TYPE_NONE>; /* termcount */
rb-gpios = <&gpmc 0 GPIO_ACTIVE_HIGH>; /* gpmc_wait0 */
nand-bus-width = <8>;
ti,nand-ecc-opt = "bch8";
ti,nand-xfer-type = "polled";
gpmc,device-nand = "true";
gpmc,device-width = <1>;
gpmc,sync-clk-ps = <0>;
gpmc,cs-on-ns = <0>;
gpmc,cs-rd-off-ns = <44>;
gpmc,cs-wr-off-ns = <44>;
gpmc,adv-on-ns = <6>;
gpmc,adv-rd-off-ns = <34>;
gpmc,adv-wr-off-ns = <44>;
gpmc,we-on-ns = <0>;
gpmc,we-off-ns = <40>;
gpmc,oe-on-ns = <0>;
gpmc,oe-off-ns = <54>;
gpmc,access-ns = <64>;
gpmc,rd-cycle-ns = <82>;
gpmc,wr-cycle-ns = <82>;
gpmc,bus-turnaround-ns = <0>;
gpmc,cycle2cycle-delay-ns = <0>;
gpmc,clk-activation-ns = <0>;
gpmc,wr-access-ns = <40>;
gpmc,wr-data-mux-bus-ns = <0>;
#address-cells = <1>;
#size-cells = <1>;
elm_id = <&elm>;
};
};
&uart0 {
pinctrl-names = "default";
pinctrl-0 = <&uart0_pins>;
status = "okay";
};
&i2c1 {
pinctrl-names = "default";
pinctrl-0 = <&i2c1_pins>;
status = "okay";
clock-frequency = <400000>;
tps: tps@2d {
reg = <0x2d>;
gpio-controller;
#gpio-cells = <2>;
interrupt-parent = <&gpio1>;
interrupts = <28 GPIO_ACTIVE_LOW>;
pinctrl-names = "default";
pinctrl-0 = <&tps65910_pins>;
};
at24@50 {
compatible = "at24,24c02";
pagesize = <8>;
reg = <0x50>;
};
};
&usb {
status = "okay";
};
&usb_ctrl_mod {
status = "okay";
};
&cppi41dma {
status = "okay";
};
#include "tps65910.dtsi"
&tps {
vcc1-supply = <&vbat>;
vcc2-supply = <&vbat>;
vcc3-supply = <&vbat>;
vcc4-supply = <&vbat>;
vcc5-supply = <&vbat>;
vcc6-supply = <&vbat>;
vcc7-supply = <&vbat>;
vccio-supply = <&vbat>;
ti,en-ck32k-xtal = <1>;
regulators {
vrtc_reg: regulator@0 {
regulator-always-on;
};
vio_reg: regulator@1 {
regulator-always-on;
};
vdd1_reg: regulator@2 {
/* VDD_MPU voltage limits 0.95V - 1.26V with +/-4% tolerance */
regulator-name = "vdd_mpu";
regulator-min-microvolt = <912500>;
regulator-max-microvolt = <1312500>;
regulator-boot-on;
regulator-always-on;
};
vdd2_reg: regulator@3 {
/* VDD_CORE voltage limits 0.95V - 1.1V with +/-4% tolerance */
regulator-name = "vdd_core";
regulator-min-microvolt = <912500>;
regulator-max-microvolt = <1150000>;
regulator-boot-on;
regulator-always-on;
};
vdd3_reg: regulator@4 {
regulator-always-on;
};
vdig1_reg: regulator@5 {
regulator-always-on;
};
vdig2_reg: regulator@6 {
regulator-always-on;
};
vpll_reg: regulator@7 {
regulator-always-on;
};
vdac_reg: regulator@8 {
regulator-always-on;
};
vaux1_reg: regulator@9 {
regulator-always-on;
};
vaux2_reg: regulator@10 {
regulator-always-on;
};
vaux33_reg: regulator@11 {
regulator-always-on;
};
vmmc_reg: regulator@12 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
};
};
};
&mac {
pinctrl-names = "default", "sleep";
pinctrl-0 = <&cpsw_default>;
pinctrl-1 = <&cpsw_sleep>;
dual_emac = <1>;
status = "okay";
};
&davinci_mdio {
pinctrl-names = "default", "sleep";
pinctrl-0 = <&davinci_mdio_default>;
pinctrl-1 = <&davinci_mdio_sleep>;
status = "okay";
};
&mmc1 {
vmmc-supply = <&vmmc_reg>;
status = "okay";
};
&mmc2 {
status = "okay";
vmmc-supply = <&wl12xx_vmmc>;
ti,non-removable;
bus-width = <4>;
cap-power-off-card;
pinctrl-names = "default";
pinctrl-0 = <&mmc2_pins>;
#address-cells = <1>;
#size-cells = <0>;
wlcore: wlcore@2 {
compatible = "ti,wl1835";
reg = <2>;
interrupt-parent = <&gpio3>;
interrupts = <7 IRQ_TYPE_LEVEL_HIGH>;
};
};
&sham {
status = "okay";
};
&aes {
status = "okay";
};
&gpio0 {
ti,no-reset-on-init;
};

75
arch/arm/boot/dts/am335x-chiliboard.dts
View File

@ -35,6 +35,59 @@
};
&am33xx_pinmux {
uart0_pins: pinmux_uart0_pins {
pinctrl-single,pins = <
AM33XX_IOPAD(0x970, PIN_INPUT_PULLUP | MUX_MODE0) /* uart0_rxd.uart0_rxd */
AM33XX_IOPAD(0x974, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart0_txd.uart0_txd */
>;
};
cpsw_default: cpsw_default {
pinctrl-single,pins = <
/* Slave 1 */
AM33XX_IOPAD(0x90c, PIN_INPUT_PULLDOWN | MUX_MODE1) /* mii1_crs.rmii1_crs */
AM33XX_IOPAD(0x910, PIN_INPUT_PULLUP | MUX_MODE1) /* mii1_rxerr.rmii1_rxerr */
AM33XX_IOPAD(0x914, PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* mii1_txen.rmii1_txen */
AM33XX_IOPAD(0x924, PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* mii1_txd1.rmii1_txd1 */
AM33XX_IOPAD(0x928, PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* mii1_txd0.rmii1_txd0 */
AM33XX_IOPAD(0x93c, PIN_INPUT_PULLUP | MUX_MODE1) /* mii1_rxd1.rmii1_rxd1 */
AM33XX_IOPAD(0x940, PIN_INPUT_PULLUP | MUX_MODE1) /* mii1_rxd0.rmii1_rxd0 */
AM33XX_IOPAD(0x944, PIN_INPUT_PULLDOWN | MUX_MODE0) /* rmii1_ref_clk.rmii_ref_clk */
>;
};
cpsw_sleep: cpsw_sleep {
pinctrl-single,pins = <
/* Slave 1 reset value */
AM33XX_IOPAD(0x90c, PIN_INPUT_PULLDOWN | MUX_MODE7)
AM33XX_IOPAD(0x910, PIN_INPUT_PULLDOWN | MUX_MODE7)
AM33XX_IOPAD(0x914, PIN_INPUT_PULLDOWN | MUX_MODE7)
AM33XX_IOPAD(0x918, PIN_INPUT_PULLDOWN | MUX_MODE7)
AM33XX_IOPAD(0x924, PIN_INPUT_PULLDOWN | MUX_MODE7)
AM33XX_IOPAD(0x928, PIN_INPUT_PULLDOWN | MUX_MODE7)
AM33XX_IOPAD(0x93c, PIN_INPUT_PULLDOWN | MUX_MODE7)
AM33XX_IOPAD(0x940, PIN_INPUT_PULLDOWN | MUX_MODE7)
AM33XX_IOPAD(0x944, PIN_INPUT_PULLDOWN | MUX_MODE7)
>;
};
davinci_mdio_default: davinci_mdio_default {
pinctrl-single,pins = <
/* mdio_data.mdio_data */
AM33XX_IOPAD(0x948, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)
/* mdio_clk.mdio_clk */
AM33XX_IOPAD(0x94c, PIN_OUTPUT_PULLUP | MUX_MODE0)
>;
};
davinci_mdio_sleep: davinci_mdio_sleep {
pinctrl-single,pins = <
/* MDIO reset value */
AM33XX_IOPAD(0x948, PIN_INPUT_PULLDOWN | MUX_MODE7)
AM33XX_IOPAD(0x94c, PIN_INPUT_PULLDOWN | MUX_MODE7)
>;
};
usb1_drvvbus: usb1_drvvbus {
pinctrl-single,pins = <
AM33XX_IOPAD(0xa34, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* usb1_drvvbus.usb1_drvvbus */
@ -61,12 +114,34 @@
};
};
&uart0 {
pinctrl-names = "default";
pinctrl-0 = <&uart0_pins>;
status = "okay";
};
&ldo4_reg {
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
};
/* Ethernet */
&mac {
slaves = <1>;
pinctrl-names = "default", "sleep";
pinctrl-0 = <&cpsw_default>;
pinctrl-1 = <&cpsw_sleep>;
status = "okay";
};
&davinci_mdio {
pinctrl-names = "default", "sleep";
pinctrl-0 = <&davinci_mdio_default>;
pinctrl-1 = <&davinci_mdio_sleep>;
status = "okay";
};
&cpsw_emac0 {
phy_id = <&davinci_mdio>, <0>;
phy-mode = "rmii";

77
arch/arm/boot/dts/am335x-chilisom.dtsi
View File

@ -35,59 +35,6 @@
>;
};
uart0_pins: pinmux_uart0_pins {
pinctrl-single,pins = <
AM33XX_IOPAD(0x970, PIN_INPUT_PULLUP | MUX_MODE0) /* uart0_rxd.uart0_rxd */
AM33XX_IOPAD(0x974, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart0_txd.uart0_txd */
>;
};
cpsw_default: cpsw_default {
pinctrl-single,pins = <
/* Slave 1 */
AM33XX_IOPAD(0x90c, PIN_INPUT_PULLDOWN | MUX_MODE1) /* mii1_crs.rmii1_crs */
AM33XX_IOPAD(0x910, PIN_INPUT_PULLUP | MUX_MODE1) /* mii1_rxerr.rmii1_rxerr */
AM33XX_IOPAD(0x914, PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* mii1_txen.rmii1_txen */
AM33XX_IOPAD(0x924, PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* mii1_txd1.rmii1_txd1 */
AM33XX_IOPAD(0x928, PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* mii1_txd0.rmii1_txd0 */
AM33XX_IOPAD(0x93c, PIN_INPUT_PULLUP | MUX_MODE1) /* mii1_rxd1.rmii1_rxd1 */
AM33XX_IOPAD(0x940, PIN_INPUT_PULLUP | MUX_MODE1) /* mii1_rxd0.rmii1_rxd0 */
AM33XX_IOPAD(0x944, PIN_INPUT_PULLDOWN | MUX_MODE0) /* rmii1_ref_clk.rmii_ref_clk */
>;
};
cpsw_sleep: cpsw_sleep {
pinctrl-single,pins = <
/* Slave 1 reset value */
AM33XX_IOPAD(0x90c, PIN_INPUT_PULLDOWN | MUX_MODE7)
AM33XX_IOPAD(0x910, PIN_INPUT_PULLDOWN | MUX_MODE7)
AM33XX_IOPAD(0x914, PIN_INPUT_PULLDOWN | MUX_MODE7)
AM33XX_IOPAD(0x918, PIN_INPUT_PULLDOWN | MUX_MODE7)
AM33XX_IOPAD(0x924, PIN_INPUT_PULLDOWN | MUX_MODE7)
AM33XX_IOPAD(0x928, PIN_INPUT_PULLDOWN | MUX_MODE7)
AM33XX_IOPAD(0x93c, PIN_INPUT_PULLDOWN | MUX_MODE7)
AM33XX_IOPAD(0x940, PIN_INPUT_PULLDOWN | MUX_MODE7)
AM33XX_IOPAD(0x944, PIN_INPUT_PULLDOWN | MUX_MODE7)
>;
};
davinci_mdio_default: davinci_mdio_default {
pinctrl-single,pins = <
/* mdio_data.mdio_data */
AM33XX_IOPAD(0x948, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)
/* mdio_clk.mdio_clk */
AM33XX_IOPAD(0x94c, PIN_OUTPUT_PULLUP | MUX_MODE0)
>;
};
davinci_mdio_sleep: davinci_mdio_sleep {
pinctrl-single,pins = <
/* MDIO reset value */
AM33XX_IOPAD(0x948, PIN_INPUT_PULLDOWN | MUX_MODE7)
AM33XX_IOPAD(0x94c, PIN_INPUT_PULLDOWN | MUX_MODE7)
>;
};
nandflash_pins: nandflash_pins {
pinctrl-single,pins = <
AM33XX_IOPAD(0x800, PIN_INPUT_PULLDOWN | MUX_MODE0) /* gpmc_ad0.gpmc_ad0 */
@ -109,13 +56,6 @@
};
};
&uart0 {
pinctrl-names = "default";
pinctrl-0 = <&uart0_pins>;
status = "okay";
};
&i2c0 {
pinctrl-names = "default";
pinctrl-0 = <&i2c0_pins>;
@ -182,20 +122,8 @@
};
};
/* Ethernet MAC */
&mac {
slaves = <1>;
pinctrl-names = "default", "sleep";
pinctrl-0 = <&cpsw_default>;
pinctrl-1 = <&cpsw_sleep>;
status = "okay";
};
&davinci_mdio {
pinctrl-names = "default", "sleep";
pinctrl-0 = <&davinci_mdio_default>;
pinctrl-1 = <&davinci_mdio_sleep>;
status = "okay";
&rtc {
system-power-controller;
};
/* NAND Flash */
@ -214,6 +142,7 @@
interrupt-parent = <&gpmc>;
interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
<1 IRQ_TYPE_NONE>; /* termcount */
rb-gpios = <&gpmc 0 GPIO_ACTIVE_HIGH>; /* gpmc_wait0 */
ti,nand-ecc-opt = "bch8";
ti,elm-id = <&elm>;
nand-bus-width = <8>;

1
arch/arm/boot/dts/am335x-cm-t335.dts
View File

@ -411,6 +411,7 @@ status = "okay";
interrupt-parent = <&gpmc>;
interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
<1 IRQ_TYPE_NONE>; /* termcount */
rb-gpios = <&gpmc 0 GPIO_ACTIVE_HIGH>; /* gpmc_wait0 */
ti,nand-ecc-opt = "bch8";
ti,elm-id = <&elm>;
nand-bus-width = <8>;

1
arch/arm/boot/dts/am335x-evm.dts
View File

@ -524,6 +524,7 @@
interrupt-parent = <&gpmc>;
interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
<1 IRQ_TYPE_NONE>; /* termcount */
rb-gpios = <&gpmc 0 GPIO_ACTIVE_HIGH>; /* gpmc_wait0 */
ti,nand-ecc-opt = "bch8";
ti,elm-id = <&elm>;
nand-bus-width = <8>;

306
arch/arm/boot/dts/am335x-icev2.dts Normal file
View File

@ -0,0 +1,306 @@
/*
* Copyright (C) 2016 Texas Instruments Incorporated - http://www.ti.com/
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
/*
* AM335x ICE V2 board
* http://www.ti.com/tool/tmdsice3359
*/
/dts-v1/;
#include "am33xx.dtsi"
/ {
model = "TI AM3359 ICE-V2";
compatible = "ti,am3359-icev2", "ti,am33xx";
memory {
device_type = "memory";
reg = <0x80000000 0x10000000>; /* 256 MB */
};
vbat: fixedregulator@0 {
compatible = "regulator-fixed";
regulator-name = "vbat";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
regulator-boot-on;
};
vtt_fixed: fixedregulator@1 {
compatible = "regulator-fixed";
regulator-name = "vtt";
regulator-min-microvolt = <1500000>;
regulator-max-microvolt = <1500000>;
gpio = <&gpio0 18 GPIO_ACTIVE_HIGH>;
regulator-always-on;
regulator-boot-on;
enable-active-high;
};
leds@0 {
compatible = "gpio-leds";
led@0 {
label = "out0";
gpios = <&tpic2810 0 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
led@1 {
label = "out1";
gpios = <&tpic2810 1 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
led@2 {
label = "out2";
gpios = <&tpic2810 2 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
led@3 {
label = "out3";
gpios = <&tpic2810 3 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
led@4 {
label = "out4";
gpios = <&tpic2810 4 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
led@5 {
label = "out5";
gpios = <&tpic2810 5 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
led@6 {
label = "out6";
gpios = <&tpic2810 6 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
led@7 {
label = "out7";
gpios = <&tpic2810 7 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
};
/* Tricolor status LEDs */
leds@1 {
compatible = "gpio-leds";
pinctrl-names = "default";
pinctrl-0 = <&user_leds>;
led@0 {
label = "status0:red:cpu0";
gpios = <&gpio0 17 GPIO_ACTIVE_HIGH>;
default-state = "off";
linux,default-trigger = "cpu0";
};
led@1 {
label = "status0:green:usr";
gpios = <&gpio0 16 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
led@2 {
label = "status0:yellow:usr";
gpios = <&gpio3 9 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
led@3 {
label = "status1:red:mmc0";
gpios = <&gpio1 30 GPIO_ACTIVE_HIGH>;
default-state = "off";
linux,default-trigger = "mmc0";
};
led@4 {
label = "status1:green:usr";
gpios = <&gpio0 20 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
led@5 {
label = "status1:yellow:usr";
gpios = <&gpio0 19 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
};
};
&am33xx_pinmux {
user_leds: user_leds {
pinctrl-single,pins = <
AM33XX_IOPAD(0x91c, PIN_OUTPUT | MUX_MODE7) /* (J18) gmii1_txd3.gpio0[16] */
AM33XX_IOPAD(0x920, PIN_OUTPUT | MUX_MODE7) /* (K15) gmii1_txd2.gpio0[17] */
AM33XX_IOPAD(0x9b0, PIN_OUTPUT | MUX_MODE7) /* (A15) xdma_event_intr0.gpio0[19] */
AM33XX_IOPAD(0x9b4, PIN_OUTPUT | MUX_MODE7) /* (D14) xdma_event_intr1.gpio0[20] */
AM33XX_IOPAD(0x880, PIN_OUTPUT | MUX_MODE7) /* (U9) gpmc_csn1.gpio1[30] */
AM33XX_IOPAD(0x92c, PIN_OUTPUT | MUX_MODE7) /* (K18) gmii1_txclk.gpio3[9] */
>;
};
mmc0_pins_default: mmc0_pins_default {
pinctrl-single,pins = <
AM33XX_IOPAD(0x8f0, PIN_INPUT_PULLUP | MUX_MODE0) /* (F17) mmc0_dat3.mmc0_dat3 */
AM33XX_IOPAD(0x8f4, PIN_INPUT_PULLUP | MUX_MODE0) /* (F18) mmc0_dat2.mmc0_dat2 */
AM33XX_IOPAD(0x8f8, PIN_INPUT_PULLUP | MUX_MODE0) /* (G15) mmc0_dat1.mmc0_dat1 */
AM33XX_IOPAD(0x8fc, PIN_INPUT_PULLUP | MUX_MODE0) /* (G16) mmc0_dat0.mmc0_dat0 */
AM33XX_IOPAD(0x900, PIN_INPUT_PULLUP | MUX_MODE0) /* (G17) mmc0_clk.mmc0_clk */
AM33XX_IOPAD(0x904, PIN_INPUT_PULLUP | MUX_MODE0) /* (G18) mmc0_cmd.mmc0_cmd */
AM33XX_IOPAD(0x960, PIN_INPUT_PULLUP | MUX_MODE5) /* (C15) spi0_cs1.mmc0_sdcd */
>;
};
i2c0_pins_default: i2c0_pins_default {
pinctrl-single,pins = <
AM33XX_IOPAD(0x988, PIN_INPUT | MUX_MODE0) /* (C17) I2C0_SDA.I2C0_SDA */
AM33XX_IOPAD(0x98c, PIN_INPUT | MUX_MODE0) /* (C16) I2C0_SCL.I2C0_SCL */
>;
};
spi0_pins_default: spi0_pins_default {
pinctrl-single,pins = <
AM33XX_IOPAD(0x950, PIN_INPUT_PULLUP | MUX_MODE0) /* (A17) spi0_sclk.spi0_sclk */
AM33XX_IOPAD(0x954, PIN_INPUT_PULLUP | MUX_MODE0) /* (B17) spi0_d0.spi0_d0 */
AM33XX_IOPAD(0x958, PIN_INPUT_PULLUP | MUX_MODE0) /* (B16) spi0_d1.spi0_d1 */
AM33XX_IOPAD(0x95c, PIN_INPUT_PULLUP | MUX_MODE0) /* (A16) spi0_cs0.spi0_cs0 */
>;
};
uart3_pins_default: uart3_pins_default {
pinctrl-single,pins = <
AM33XX_IOPAD(0x934, PIN_INPUT_PULLUP | MUX_MODE1) /* (L17) gmii1_rxd3.uart3_rxd */
AM33XX_IOPAD(0x938, PIN_OUTPUT_PULLUP | MUX_MODE1) /* (L16) gmii1_rxd2.uart3_txd */
>;
};
};
&i2c0 {
pinctrl-names = "default";
pinctrl-0 = <&i2c0_pins_default>;
status = "okay";
clock-frequency = <400000>;
tps: power-controller@2d {
reg = <0x2d>;
};
tpic2810: gpio@60 {
compatible = "ti,tpic2810";
reg = <0x60>;
gpio-controller;
#gpio-cells = <2>;
};
};
#include "tps65910.dtsi"
&tps {
vcc1-supply = <&vbat>;
vcc2-supply = <&vbat>;
vcc3-supply = <&vbat>;
vcc4-supply = <&vbat>;
vcc5-supply = <&vbat>;
vcc6-supply = <&vbat>;
vcc7-supply = <&vbat>;
vccio-supply = <&vbat>;
regulators {
vrtc_reg: regulator@0 {
regulator-always-on;
};
vio_reg: regulator@1 {
regulator-always-on;
};
vdd1_reg: regulator@2 {
regulator-name = "vdd_mpu";
regulator-min-microvolt = <912500>;
regulator-max-microvolt = <1326000>;
regulator-boot-on;
regulator-always-on;
};
vdd2_reg: regulator@3 {
regulator-name = "vdd_core";
regulator-min-microvolt = <912500>;
regulator-max-microvolt = <1144000>;
regulator-boot-on;
regulator-always-on;
};
vdd3_reg: regulator@4 {
regulator-always-on;
};
vdig1_reg: regulator@5 {
regulator-always-on;
};
vdig2_reg: regulator@6 {
regulator-always-on;
};
vpll_reg: regulator@7 {
regulator-always-on;
};
vdac_reg: regulator@8 {
regulator-always-on;
};
vaux1_reg: regulator@9 {
regulator-always-on;
};
vaux2_reg: regulator@10 {
regulator-always-on;
};
vaux33_reg: regulator@11 {
regulator-always-on;
};
vmmc_reg: regulator@12 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
};
};
};
&mmc1 {
status = "okay";
vmmc-supply = <&vmmc_reg>;
bus-width = <4>;
pinctrl-names = "default";
pinctrl-0 = <&mmc0_pins_default>;
};
&gpio0 {
/* Do not idle the GPIO used for holding the VTT regulator */
ti,no-reset-on-init;
ti,no-idle-on-init;
};
&uart3 {
pinctrl-names = "default";
pinctrl-0 = <&uart3_pins_default>;
status = "okay";
};

1
arch/arm/boot/dts/am335x-igep0033.dtsi
View File

@ -135,6 +135,7 @@
interrupt-parent = <&gpmc>;
interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
<1 IRQ_TYPE_NONE>; /* termcount */
rb-gpios = <&gpmc 0 GPIO_ACTIVE_HIGH>; /* gpmc_wait0 */
nand-bus-width = <8>;
ti,nand-ecc-opt = "bch8";
gpmc,device-width = <1>;

1
arch/arm/boot/dts/am335x-phycore-som.dtsi
View File

@ -171,6 +171,7 @@
interrupt-parent = <&gpmc>;
interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
<1 IRQ_TYPE_NONE>; /* termcount */
rb-gpios = <&gpmc 0 GPIO_ACTIVE_HIGH>; /* gpmc_wait0 */
nand-bus-width = <8>;
ti,nand-ecc-opt = "bch8";
gpmc,device-nand = "true";

2
arch/arm/boot/dts/am335x-shc.dts
View File

@ -138,7 +138,7 @@
&epwmss1 {
status = "okay";
ehrpwm1: ehrpwm@48302200 {
ehrpwm1: pwm@48302200 {
pinctrl-names = "default";
pinctrl-0 = <&ehrpwm1_pins>;
status = "okay";

90
arch/arm/boot/dts/am33xx-clocks.dtsi
View File

@ -8,7 +8,7 @@
* published by the Free Software Foundation.
*/
&scm_clocks {
sys_clkin_ck: sys_clkin_ck {
sys_clkin_ck: sys_clkin_ck@40 {
#clock-cells = <0>;
compatible = "ti,mux-clock";
clocks = <&virt_19200000_ck>, <&virt_24000000_ck>, <&virt_25000000_ck>, <&virt_26000000_ck>;
@ -163,7 +163,7 @@
clock-frequency = <12000000>;
};
dpll_core_ck: dpll_core_ck {
dpll_core_ck: dpll_core_ck@490 {
#clock-cells = <0>;
compatible = "ti,am3-dpll-core-clock";
clocks = <&sys_clkin_ck>, <&sys_clkin_ck>;
@ -176,7 +176,7 @@
clocks = <&dpll_core_ck>;
};
dpll_core_m4_ck: dpll_core_m4_ck {
dpll_core_m4_ck: dpll_core_m4_ck@480 {
#clock-cells = <0>;
compatible = "ti,divider-clock";
clocks = <&dpll_core_x2_ck>;
@ -185,7 +185,7 @@
ti,index-starts-at-one;
};
dpll_core_m5_ck: dpll_core_m5_ck {
dpll_core_m5_ck: dpll_core_m5_ck@484 {
#clock-cells = <0>;
compatible = "ti,divider-clock";
clocks = <&dpll_core_x2_ck>;
@ -194,7 +194,7 @@
ti,index-starts-at-one;
};
dpll_core_m6_ck: dpll_core_m6_ck {
dpll_core_m6_ck: dpll_core_m6_ck@4d8 {
#clock-cells = <0>;
compatible = "ti,divider-clock";
clocks = <&dpll_core_x2_ck>;
@ -203,14 +203,14 @@
ti,index-starts-at-one;
};
dpll_mpu_ck: dpll_mpu_ck {
dpll_mpu_ck: dpll_mpu_ck@488 {
#clock-cells = <0>;
compatible = "ti,am3-dpll-clock";
clocks = <&sys_clkin_ck>, <&sys_clkin_ck>;
reg = <0x0488>, <0x0420>, <0x042c>;
};
dpll_mpu_m2_ck: dpll_mpu_m2_ck {
dpll_mpu_m2_ck: dpll_mpu_m2_ck@4a8 {
#clock-cells = <0>;
compatible = "ti,divider-clock";
clocks = <&dpll_mpu_ck>;
@ -219,14 +219,14 @@
ti,index-starts-at-one;
};
dpll_ddr_ck: dpll_ddr_ck {
dpll_ddr_ck: dpll_ddr_ck@494 {
#clock-cells = <0>;
compatible = "ti,am3-dpll-no-gate-clock";
clocks = <&sys_clkin_ck>, <&sys_clkin_ck>;
reg = <0x0494>, <0x0434>, <0x0440>;
};
dpll_ddr_m2_ck: dpll_ddr_m2_ck {
dpll_ddr_m2_ck: dpll_ddr_m2_ck@4a0 {
#clock-cells = <0>;
compatible = "ti,divider-clock";
clocks = <&dpll_ddr_ck>;
@ -243,14 +243,14 @@
clock-div = <2>;
};
dpll_disp_ck: dpll_disp_ck {
dpll_disp_ck: dpll_disp_ck@498 {
#clock-cells = <0>;
compatible = "ti,am3-dpll-no-gate-clock";
clocks = <&sys_clkin_ck>, <&sys_clkin_ck>;
reg = <0x0498>, <0x0448>, <0x0454>;
};
dpll_disp_m2_ck: dpll_disp_m2_ck {
dpll_disp_m2_ck: dpll_disp_m2_ck@4a4 {
#clock-cells = <0>;
compatible = "ti,divider-clock";
clocks = <&dpll_disp_ck>;
@ -260,14 +260,14 @@
ti,set-rate-parent;
};
dpll_per_ck: dpll_per_ck {
dpll_per_ck: dpll_per_ck@48c {
#clock-cells = <0>;
compatible = "ti,am3-dpll-no-gate-j-type-clock";
clocks = <&sys_clkin_ck>, <&sys_clkin_ck>;
reg = <0x048c>, <0x0470>, <0x049c>;
};
dpll_per_m2_ck: dpll_per_m2_ck {
dpll_per_m2_ck: dpll_per_m2_ck@4ac {
#clock-cells = <0>;
compatible = "ti,divider-clock";
clocks = <&dpll_per_ck>;
@ -292,7 +292,7 @@
clock-div = <4>;
};
cefuse_fck: cefuse_fck {
cefuse_fck: cefuse_fck@a20 {
#clock-cells = <0>;
compatible = "ti,gate-clock";
clocks = <&sys_clkin_ck>;
@ -316,7 +316,7 @@
clock-div = <732>;
};
clkdiv32k_ick: clkdiv32k_ick {
clkdiv32k_ick: clkdiv32k_ick@14c {
#clock-cells = <0>;
compatible = "ti,gate-clock";
clocks = <&clkdiv32k_ck>;
@ -332,14 +332,14 @@
clock-div = <1>;
};
pruss_ocp_gclk: pruss_ocp_gclk {
pruss_ocp_gclk: pruss_ocp_gclk@530 {
#clock-cells = <0>;
compatible = "ti,mux-clock";
clocks = <&l3_gclk>, <&dpll_disp_m2_ck>;
reg = <0x0530>;
};
mmu_fck: mmu_fck {
mmu_fck: mmu_fck@914 {
#clock-cells = <0>;
compatible = "ti,gate-clock";
clocks = <&dpll_core_m4_ck>;
@ -347,56 +347,56 @@
reg = <0x0914>;
};
timer1_fck: timer1_fck {
timer1_fck: timer1_fck@528 {
#clock-cells = <0>;
compatible = "ti,mux-clock";
clocks = <&sys_clkin_ck>, <&clkdiv32k_ick>, <&tclkin_ck>, <&clk_rc32k_ck>, <&clk_32768_ck>;
reg = <0x0528>;
};
timer2_fck: timer2_fck {
timer2_fck: timer2_fck@508 {
#clock-cells = <0>;
compatible = "ti,mux-clock";
clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>;
reg = <0x0508>;
};
timer3_fck: timer3_fck {
timer3_fck: timer3_fck@50c {
#clock-cells = <0>;
compatible = "ti,mux-clock";
clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>;
reg = <0x050c>;
};
timer4_fck: timer4_fck {
timer4_fck: timer4_fck@510 {
#clock-cells = <0>;
compatible = "ti,mux-clock";
clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>;
reg = <0x0510>;
};
timer5_fck: timer5_fck {
timer5_fck: timer5_fck@518 {
#clock-cells = <0>;
compatible = "ti,mux-clock";
clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>;
reg = <0x0518>;
};
timer6_fck: timer6_fck {
timer6_fck: timer6_fck@51c {
#clock-cells = <0>;
compatible = "ti,mux-clock";
clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>;
reg = <0x051c>;
};
timer7_fck: timer7_fck {
timer7_fck: timer7_fck@504 {
#clock-cells = <0>;
compatible = "ti,mux-clock";
clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>;
reg = <0x0504>;
};
usbotg_fck: usbotg_fck {
usbotg_fck: usbotg_fck@47c {
#clock-cells = <0>;
compatible = "ti,gate-clock";
clocks = <&dpll_per_ck>;
@ -412,7 +412,7 @@
clock-div = <2>;
};
ieee5000_fck: ieee5000_fck {
ieee5000_fck: ieee5000_fck@e4 {
#clock-cells = <0>;
compatible = "ti,gate-clock";
clocks = <&dpll_core_m4_div2_ck>;
@ -420,7 +420,7 @@
reg = <0x00e4>;
};
wdt1_fck: wdt1_fck {
wdt1_fck: wdt1_fck@538 {
#clock-cells = <0>;
compatible = "ti,mux-clock";
clocks = <&clk_rc32k_ck>, <&clkdiv32k_ick>;
@ -483,21 +483,21 @@
clock-div = <2>;
};
cpsw_cpts_rft_clk: cpsw_cpts_rft_clk {
cpsw_cpts_rft_clk: cpsw_cpts_rft_clk@520 {
#clock-cells = <0>;
compatible = "ti,mux-clock";
clocks = <&dpll_core_m5_ck>, <&dpll_core_m4_ck>;
reg = <0x0520>;
};
gpio0_dbclk_mux_ck: gpio0_dbclk_mux_ck {
gpio0_dbclk_mux_ck: gpio0_dbclk_mux_ck@53c {
#clock-cells = <0>;
compatible = "ti,mux-clock";
clocks = <&clk_rc32k_ck>, <&clk_32768_ck>, <&clkdiv32k_ick>;
reg = <0x053c>;
};
gpio0_dbclk: gpio0_dbclk {
gpio0_dbclk: gpio0_dbclk@408 {
#clock-cells = <0>;
compatible = "ti,gate-clock";
clocks = <&gpio0_dbclk_mux_ck>;
@ -505,7 +505,7 @@
reg = <0x0408>;
};
gpio1_dbclk: gpio1_dbclk {
gpio1_dbclk: gpio1_dbclk@ac {
#clock-cells = <0>;
compatible = "ti,gate-clock";
clocks = <&clkdiv32k_ick>;
@ -513,7 +513,7 @@
reg = <0x00ac>;
};
gpio2_dbclk: gpio2_dbclk {
gpio2_dbclk: gpio2_dbclk@b0 {
#clock-cells = <0>;
compatible = "ti,gate-clock";
clocks = <&clkdiv32k_ick>;
@ -521,7 +521,7 @@
reg = <0x00b0>;
};
gpio3_dbclk: gpio3_dbclk {
gpio3_dbclk: gpio3_dbclk@b4 {
#clock-cells = <0>;
compatible = "ti,gate-clock";
clocks = <&clkdiv32k_ick>;
@ -529,7 +529,7 @@
reg = <0x00b4>;
};
lcd_gclk: lcd_gclk {
lcd_gclk: lcd_gclk@534 {
#clock-cells = <0>;
compatible = "ti,mux-clock";
clocks = <&dpll_disp_m2_ck>, <&dpll_core_m5_ck>, <&dpll_per_m2_ck>;
@ -545,7 +545,7 @@
clock-div = <2>;
};
gfx_fclk_clksel_ck: gfx_fclk_clksel_ck {
gfx_fclk_clksel_ck: gfx_fclk_clksel_ck@52c {
#clock-cells = <0>;
compatible = "ti,mux-clock";
clocks = <&dpll_core_m4_ck>, <&dpll_per_m2_ck>;
@ -553,7 +553,7 @@
reg = <0x052c>;
};
gfx_fck_div_ck: gfx_fck_div_ck {
gfx_fck_div_ck: gfx_fck_div_ck@52c {
#clock-cells = <0>;
compatible = "ti,divider-clock";
clocks = <&gfx_fclk_clksel_ck>;
@ -561,14 +561,14 @@
ti,max-div = <2>;
};
sysclkout_pre_ck: sysclkout_pre_ck {
sysclkout_pre_ck: sysclkout_pre_ck@700 {
#clock-cells = <0>;
compatible = "ti,mux-clock";
clocks = <&clk_32768_ck>, <&l3_gclk>, <&dpll_ddr_m2_ck>, <&dpll_per_m2_ck>, <&lcd_gclk>;
reg = <0x0700>;
};
clkout2_div_ck: clkout2_div_ck {
clkout2_div_ck: clkout2_div_ck@700 {
#clock-cells = <0>;
compatible = "ti,divider-clock";
clocks = <&sysclkout_pre_ck>;
@ -577,7 +577,7 @@
reg = <0x0700>;
};
dbg_sysclk_ck: dbg_sysclk_ck {
dbg_sysclk_ck: dbg_sysclk_ck@414 {
#clock-cells = <0>;
compatible = "ti,gate-clock";
clocks = <&sys_clkin_ck>;
@ -585,7 +585,7 @@
reg = <0x0414>;
};
dbg_clka_ck: dbg_clka_ck {
dbg_clka_ck: dbg_clka_ck@414 {
#clock-cells = <0>;
compatible = "ti,gate-clock";
clocks = <&dpll_core_m4_ck>;
@ -593,7 +593,7 @@
reg = <0x0414>;
};
stm_pmd_clock_mux_ck: stm_pmd_clock_mux_ck {
stm_pmd_clock_mux_ck: stm_pmd_clock_mux_ck@414 {
#clock-cells = <0>;
compatible = "ti,mux-clock";
clocks = <&dbg_sysclk_ck>, <&dbg_clka_ck>;
@ -601,7 +601,7 @@
reg = <0x0414>;
};
trace_pmd_clk_mux_ck: trace_pmd_clk_mux_ck {
trace_pmd_clk_mux_ck: trace_pmd_clk_mux_ck@414 {
#clock-cells = <0>;
compatible = "ti,mux-clock";
clocks = <&dbg_sysclk_ck>, <&dbg_clka_ck>;
@ -609,7 +609,7 @@
reg = <0x0414>;
};
stm_clk_div_ck: stm_clk_div_ck {
stm_clk_div_ck: stm_clk_div_ck@414 {
#clock-cells = <0>;
compatible = "ti,divider-clock";
clocks = <&stm_pmd_clock_mux_ck>;
@ -619,7 +619,7 @@
ti,index-power-of-two;
};
trace_clk_div_ck: trace_clk_div_ck {
trace_clk_div_ck: trace_clk_div_ck@414 {
#clock-cells = <0>;
compatible = "ti,divider-clock";
clocks = <&trace_pmd_clk_mux_ck>;
@ -629,7 +629,7 @@
ti,index-power-of-two;
};
clkout2_ck: clkout2_ck {
clkout2_ck: clkout2_ck@700 {
#clock-cells = <0>;
compatible = "ti,gate-clock";
clocks = <&clkout2_div_ck>;

8
arch/arm/boot/dts/am33xx.dtsi
View File

@ -688,7 +688,7 @@
status = "disabled";
};
ehrpwm0: ehrpwm@48300200 {
ehrpwm0: pwm@48300200 {
compatible = "ti,am33xx-ehrpwm";
#pwm-cells = <3>;
reg = <0x48300200 0x80>;
@ -718,7 +718,7 @@
status = "disabled";
};
ehrpwm1: ehrpwm@48302200 {
ehrpwm1: pwm@48302200 {
compatible = "ti,am33xx-ehrpwm";
#pwm-cells = <3>;
reg = <0x48302200 0x80>;
@ -748,7 +748,7 @@
status = "disabled";
};
ehrpwm2: ehrpwm@48304200 {
ehrpwm2: pwm@48304200 {
compatible = "ti,am33xx-ehrpwm";
#pwm-cells = <3>;
reg = <0x48304200 0x80>;
@ -868,6 +868,8 @@
#size-cells = <1>;
interrupt-controller;
#interrupt-cells = <2>;
gpio-controller;
#gpio-cells = <2>;
status = "disabled";
};

20
arch/arm/boot/dts/am35xx-clocks.dtsi
View File

@ -8,7 +8,7 @@
* published by the Free Software Foundation.
*/
&scm_clocks {
emac_ick: emac_ick {
emac_ick: emac_ick@32c {
#clock-cells = <0>;
compatible = "ti,am35xx-gate-clock";
clocks = <&ipss_ick>;
@ -16,7 +16,7 @@
ti,bit-shift = <1>;
};
emac_fck: emac_fck {
emac_fck: emac_fck@32c {
#clock-cells = <0>;
compatible = "ti,gate-clock";
clocks = <&rmii_ck>;
@ -24,7 +24,7 @@
ti,bit-shift = <9>;
};
vpfe_ick: vpfe_ick {
vpfe_ick: vpfe_ick@32c {
#clock-cells = <0>;
compatible = "ti,am35xx-gate-clock";
clocks = <&ipss_ick>;
@ -32,7 +32,7 @@
ti,bit-shift = <2>;
};
vpfe_fck: vpfe_fck {
vpfe_fck: vpfe_fck@32c {
#clock-cells = <0>;
compatible = "ti,gate-clock";
clocks = <&pclk_ck>;
@ -40,7 +40,7 @@
ti,bit-shift = <10>;
};
hsotgusb_ick_am35xx: hsotgusb_ick_am35xx {
hsotgusb_ick_am35xx: hsotgusb_ick_am35xx@32c {
#clock-cells = <0>;
compatible = "ti,am35xx-gate-clock";
clocks = <&ipss_ick>;
@ -48,7 +48,7 @@
ti,bit-shift = <0>;
};
hsotgusb_fck_am35xx: hsotgusb_fck_am35xx {
hsotgusb_fck_am35xx: hsotgusb_fck_am35xx@32c {
#clock-cells = <0>;
compatible = "ti,gate-clock";
clocks = <&sys_ck>;
@ -56,7 +56,7 @@
ti,bit-shift = <8>;
};
hecc_ck: hecc_ck {
hecc_ck: hecc_ck@32c {
#clock-cells = <0>;
compatible = "ti,am35xx-gate-clock";
clocks = <&sys_ck>;
@ -65,7 +65,7 @@
};
};
&cm_clocks {
ipss_ick: ipss_ick {
ipss_ick: ipss_ick@a10 {
#clock-cells = <0>;
compatible = "ti,am35xx-interface-clock";
clocks = <&core_l3_ick>;
@ -85,7 +85,7 @@
clock-frequency = <27000000>;
};
uart4_ick_am35xx: uart4_ick_am35xx {
uart4_ick_am35xx: uart4_ick_am35xx@a10 {
#clock-cells = <0>;
compatible = "ti,omap3-interface-clock";
clocks = <&core_l4_ick>;
@ -93,7 +93,7 @@
ti,bit-shift = <23>;
};
uart4_fck_am35xx: uart4_fck_am35xx {
uart4_fck_am35xx: uart4_fck_am35xx@a00 {
#clock-cells = <0>;
compatible = "ti,wait-gate-clock";
clocks = <&core_48m_fck>;

14
arch/arm/boot/dts/am4372.dtsi
View File

@ -679,7 +679,7 @@
status = "disabled";
};
ehrpwm0: ehrpwm@48300200 {
ehrpwm0: pwm@48300200 {
compatible = "ti,am4372-ehrpwm","ti,am33xx-ehrpwm";
#pwm-cells = <3>;
reg = <0x48300200 0x80>;
@ -705,7 +705,7 @@
status = "disabled";
};
ehrpwm1: ehrpwm@48302200 {
ehrpwm1: pwm@48302200 {
compatible = "ti,am4372-ehrpwm","ti,am33xx-ehrpwm";
#pwm-cells = <3>;
reg = <0x48302200 0x80>;
@ -731,7 +731,7 @@
status = "disabled";
};
ehrpwm2: ehrpwm@48304200 {
ehrpwm2: pwm@48304200 {
compatible = "ti,am4372-ehrpwm","ti,am33xx-ehrpwm";
#pwm-cells = <3>;
reg = <0x48304200 0x80>;
@ -749,7 +749,7 @@
ti,hwmods = "epwmss3";
status = "disabled";
ehrpwm3: ehrpwm@48306200 {
ehrpwm3: pwm@48306200 {
compatible = "ti,am4372-ehrpwm","ti,am33xx-ehrpwm";
#pwm-cells = <3>;
reg = <0x48306200 0x80>;
@ -767,7 +767,7 @@
ti,hwmods = "epwmss4";
status = "disabled";
ehrpwm4: ehrpwm@48308200 {
ehrpwm4: pwm@48308200 {
compatible = "ti,am4372-ehrpwm","ti,am33xx-ehrpwm";
#pwm-cells = <3>;
reg = <0x48308200 0x80>;
@ -785,7 +785,7 @@
ti,hwmods = "epwmss5";
status = "disabled";
ehrpwm5: ehrpwm@4830a200 {
ehrpwm5: pwm@4830a200 {
compatible = "ti,am4372-ehrpwm","ti,am33xx-ehrpwm";
#pwm-cells = <3>;
reg = <0x4830a200 0x80>;
@ -896,6 +896,8 @@
#size-cells = <1>;
interrupt-controller;
#interrupt-cells = <2>;
gpio-controller;
#gpio-cells = <2>;
status = "disabled";
};

3
arch/arm/boot/dts/am437x-gp-evm.dts
View File

@ -119,7 +119,7 @@
clock-frequency = <32768>;
};
sound0: sound@0 {
sound0: sound0 {
compatible = "simple-audio-card";
simple-audio-card,name = "AM437x-GP-EVM";
simple-audio-card,widgets =
@ -817,6 +817,7 @@
interrupt-parent = <&gpmc>;
interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
<1 IRQ_TYPE_NONE>; /* termcount */
rb-gpios = <&gpmc 0 GPIO_ACTIVE_HIGH>; /* gpmc_wait0 */
ti,nand-ecc-opt = "bch16";
ti,elm-id = <&elm>;
nand-bus-width = <8>;

3
arch/arm/boot/dts/am43x-epos-evm.dts
View File

@ -107,7 +107,7 @@
default-brightness-level = <8>;
};
sound0: sound@0 {
sound0: sound0 {
compatible = "simple-audio-card";
simple-audio-card,name = "AM43-EPOS-EVM";
simple-audio-card,widgets =
@ -568,6 +568,7 @@
interrupt-parent = <&gpmc>;
interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
<1 IRQ_TYPE_NONE>; /* termcount */
rb-gpios = <&gpmc 0 GPIO_ACTIVE_HIGH>; /* gpmc_wait0 */
ti,nand-ecc-opt = "bch16";
ti,elm-id = <&elm>;
nand-bus-width = <8>;

170
arch/arm/boot/dts/am43xx-clocks.dtsi
View File

@ -8,7 +8,7 @@
* published by the Free Software Foundation.
*/
&scm_clocks {
sys_clkin_ck: sys_clkin_ck {
sys_clkin_ck: sys_clkin_ck@40 {
#clock-cells = <0>;
compatible = "ti,mux-clock";
clocks = <&sysboot_freq_sel_ck>, <&crystal_freq_sel_ck>;
@ -16,7 +16,7 @@
reg = <0x0040>;
};
crystal_freq_sel_ck: crystal_freq_sel_ck {
crystal_freq_sel_ck: crystal_freq_sel_ck@40 {
#clock-cells = <0>;
compatible = "ti,mux-clock";
clocks = <&virt_19200000_ck>, <&virt_24000000_ck>, <&virt_25000000_ck>, <&virt_26000000_ck>;
@ -104,7 +104,7 @@
clock-div = <1>;
};
ehrpwm0_tbclk: ehrpwm0_tbclk {
ehrpwm0_tbclk: ehrpwm0_tbclk@664 {
#clock-cells = <0>;
compatible = "ti,gate-clock";
clocks = <&l4ls_gclk>;
@ -112,7 +112,7 @@
reg = <0x0664>;
};
ehrpwm1_tbclk: ehrpwm1_tbclk {
ehrpwm1_tbclk: ehrpwm1_tbclk@664 {
#clock-cells = <0>;
compatible = "ti,gate-clock";
clocks = <&l4ls_gclk>;
@ -120,7 +120,7 @@
reg = <0x0664>;
};
ehrpwm2_tbclk: ehrpwm2_tbclk {
ehrpwm2_tbclk: ehrpwm2_tbclk@664 {
#clock-cells = <0>;
compatible = "ti,gate-clock";
clocks = <&l4ls_gclk>;
@ -128,7 +128,7 @@
reg = <0x0664>;
};
ehrpwm3_tbclk: ehrpwm3_tbclk {
ehrpwm3_tbclk: ehrpwm3_tbclk@664 {
#clock-cells = <0>;
compatible = "ti,gate-clock";
clocks = <&l4ls_gclk>;
@ -136,7 +136,7 @@
reg = <0x0664>;
};
ehrpwm4_tbclk: ehrpwm4_tbclk {
ehrpwm4_tbclk: ehrpwm4_tbclk@664 {
#clock-cells = <0>;
compatible = "ti,gate-clock";
clocks = <&l4ls_gclk>;
@ -144,7 +144,7 @@
reg = <0x0664>;
};
ehrpwm5_tbclk: ehrpwm5_tbclk {
ehrpwm5_tbclk: ehrpwm5_tbclk@664 {
#clock-cells = <0>;
compatible = "ti,gate-clock";
clocks = <&l4ls_gclk>;
@ -195,7 +195,7 @@
clock-frequency = <26000000>;
};
dpll_core_ck: dpll_core_ck {
dpll_core_ck: dpll_core_ck@2d20 {
#clock-cells = <0>;
compatible = "ti,am3-dpll-core-clock";
clocks = <&sys_clkin_ck>, <&sys_clkin_ck>;
@ -208,7 +208,7 @@
clocks = <&dpll_core_ck>;
};
dpll_core_m4_ck: dpll_core_m4_ck {
dpll_core_m4_ck: dpll_core_m4_ck@2d38 {
#clock-cells = <0>;
compatible = "ti,divider-clock";
clocks = <&dpll_core_x2_ck>;
@ -219,7 +219,7 @@
ti,invert-autoidle-bit;
};
dpll_core_m5_ck: dpll_core_m5_ck {
dpll_core_m5_ck: dpll_core_m5_ck@2d3c {
#clock-cells = <0>;
compatible = "ti,divider-clock";
clocks = <&dpll_core_x2_ck>;
@ -230,7 +230,7 @@
ti,invert-autoidle-bit;
};
dpll_core_m6_ck: dpll_core_m6_ck {
dpll_core_m6_ck: dpll_core_m6_ck@2d40 {
#clock-cells = <0>;
compatible = "ti,divider-clock";
clocks = <&dpll_core_x2_ck>;
@ -241,14 +241,14 @@
ti,invert-autoidle-bit;
};
dpll_mpu_ck: dpll_mpu_ck {
dpll_mpu_ck: dpll_mpu_ck@2d60 {
#clock-cells = <0>;
compatible = "ti,am3-dpll-clock";
clocks = <&sys_clkin_ck>, <&sys_clkin_ck>;
reg = <0x2d60>, <0x2d64>, <0x2d6c>;
};
dpll_mpu_m2_ck: dpll_mpu_m2_ck {
dpll_mpu_m2_ck: dpll_mpu_m2_ck@2d70 {
#clock-cells = <0>;
compatible = "ti,divider-clock";
clocks = <&dpll_mpu_ck>;
@ -267,14 +267,14 @@
clock-div = <2>;
};
dpll_ddr_ck: dpll_ddr_ck {
dpll_ddr_ck: dpll_ddr_ck@2da0 {
#clock-cells = <0>;
compatible = "ti,am3-dpll-clock";
clocks = <&sys_clkin_ck>, <&sys_clkin_ck>;
reg = <0x2da0>, <0x2da4>, <0x2dac>;
};
dpll_ddr_m2_ck: dpll_ddr_m2_ck {
dpll_ddr_m2_ck: dpll_ddr_m2_ck@2db0 {
#clock-cells = <0>;
compatible = "ti,divider-clock";
clocks = <&dpll_ddr_ck>;
@ -285,14 +285,14 @@
ti,invert-autoidle-bit;
};
dpll_disp_ck: dpll_disp_ck {
dpll_disp_ck: dpll_disp_ck@2e20 {
#clock-cells = <0>;
compatible = "ti,am3-dpll-clock";
clocks = <&sys_clkin_ck>, <&sys_clkin_ck>;
reg = <0x2e20>, <0x2e24>, <0x2e2c>;
};
dpll_disp_m2_ck: dpll_disp_m2_ck {
dpll_disp_m2_ck: dpll_disp_m2_ck@2e30 {
#clock-cells = <0>;
compatible = "ti,divider-clock";
clocks = <&dpll_disp_ck>;
@ -304,14 +304,14 @@
ti,set-rate-parent;
};
dpll_per_ck: dpll_per_ck {
dpll_per_ck: dpll_per_ck@2de0 {
#clock-cells = <0>;
compatible = "ti,am3-dpll-j-type-clock";
clocks = <&sys_clkin_ck>, <&sys_clkin_ck>;
reg = <0x2de0>, <0x2de4>, <0x2dec>;
};
dpll_per_m2_ck: dpll_per_m2_ck {
dpll_per_m2_ck: dpll_per_m2_ck@2df0 {
#clock-cells = <0>;
compatible = "ti,divider-clock";
clocks = <&dpll_per_ck>;
@ -354,7 +354,7 @@
clock-div = <732>;
};
clkdiv32k_ick: clkdiv32k_ick {
clkdiv32k_ick: clkdiv32k_ick@2a38 {
#clock-cells = <0>;
compatible = "ti,gate-clock";
clocks = <&clkdiv32k_ck>;
@ -370,7 +370,7 @@
clock-div = <1>;
};
pruss_ocp_gclk: pruss_ocp_gclk {
pruss_ocp_gclk: pruss_ocp_gclk@4248 {
#clock-cells = <0>;
compatible = "ti,mux-clock";
clocks = <&sysclk_div>, <&dpll_disp_m2_ck>;
@ -383,56 +383,56 @@
clock-frequency = <32768>;
};
timer1_fck: timer1_fck {
timer1_fck: timer1_fck@4200 {
#clock-cells = <0>;
compatible = "ti,mux-clock";
clocks = <&sys_clkin_ck>, <&clkdiv32k_ick>, <&tclkin_ck>, <&clk_rc32k_ck>, <&clk_32768_ck>, <&clk_32k_tpm_ck>;
reg = <0x4200>;
};
timer2_fck: timer2_fck {
timer2_fck: timer2_fck@4204 {
#clock-cells = <0>;
compatible = "ti,mux-clock";
clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>;
reg = <0x4204>;
};
timer3_fck: timer3_fck {
timer3_fck: timer3_fck@4208 {
#clock-cells = <0>;
compatible = "ti,mux-clock";
clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>;
reg = <0x4208>;
};
timer4_fck: timer4_fck {
timer4_fck: timer4_fck@420c {
#clock-cells = <0>;
compatible = "ti,mux-clock";
clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>;
reg = <0x420c>;
};
timer5_fck: timer5_fck {
timer5_fck: timer5_fck@4210 {
#clock-cells = <0>;
compatible = "ti,mux-clock";
clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>;
reg = <0x4210>;
};
timer6_fck: timer6_fck {
timer6_fck: timer6_fck@4214 {
#clock-cells = <0>;
compatible = "ti,mux-clock";
clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>;
reg = <0x4214>;
};
timer7_fck: timer7_fck {
timer7_fck: timer7_fck@4218 {
#clock-cells = <0>;
compatible = "ti,mux-clock";
clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>;
reg = <0x4218>;
};
wdt1_fck: wdt1_fck {
wdt1_fck: wdt1_fck@422c {
#clock-cells = <0>;
compatible = "ti,mux-clock";
clocks = <&clk_rc32k_ck>, <&clkdiv32k_ick>;
@ -487,14 +487,14 @@
clock-div = <2>;
};
cpsw_cpts_rft_clk: cpsw_cpts_rft_clk {
cpsw_cpts_rft_clk: cpsw_cpts_rft_clk@4238 {
#clock-cells = <0>;
compatible = "ti,mux-clock";
clocks = <&sysclk_div>, <&dpll_core_m5_ck>, <&dpll_disp_m2_ck>;
reg = <0x4238>;
};
dpll_clksel_mac_clk: dpll_clksel_mac_clk {
dpll_clksel_mac_clk: dpll_clksel_mac_clk@4234 {
#clock-cells = <0>;
compatible = "ti,divider-clock";
clocks = <&dpll_core_m5_ck>;
@ -509,14 +509,14 @@
clock-frequency = <32768>;
};
gpio0_dbclk_mux_ck: gpio0_dbclk_mux_ck {
gpio0_dbclk_mux_ck: gpio0_dbclk_mux_ck@4240 {
#clock-cells = <0>;
compatible = "ti,mux-clock";
clocks = <&clk_rc32k_ck>, <&clk_32768_ck>, <&clkdiv32k_ick>, <&clk_32k_mosc_ck>, <&clk_32k_tpm_ck>;
reg = <0x4240>;
};
gpio0_dbclk: gpio0_dbclk {
gpio0_dbclk: gpio0_dbclk@2b68 {
#clock-cells = <0>;
compatible = "ti,gate-clock";
clocks = <&gpio0_dbclk_mux_ck>;
@ -524,7 +524,7 @@
reg = <0x2b68>;
};
gpio1_dbclk: gpio1_dbclk {
gpio1_dbclk: gpio1_dbclk@8c78 {
#clock-cells = <0>;
compatible = "ti,gate-clock";
clocks = <&clkdiv32k_ick>;
@ -532,7 +532,7 @@
reg = <0x8c78>;
};
gpio2_dbclk: gpio2_dbclk {
gpio2_dbclk: gpio2_dbclk@8c80 {
#clock-cells = <0>;
compatible = "ti,gate-clock";
clocks = <&clkdiv32k_ick>;
@ -540,7 +540,7 @@
reg = <0x8c80>;
};
gpio3_dbclk: gpio3_dbclk {
gpio3_dbclk: gpio3_dbclk@8c88 {
#clock-cells = <0>;
compatible = "ti,gate-clock";
clocks = <&clkdiv32k_ick>;
@ -548,7 +548,7 @@
reg = <0x8c88>;
};
gpio4_dbclk: gpio4_dbclk {
gpio4_dbclk: gpio4_dbclk@8c90 {
#clock-cells = <0>;
compatible = "ti,gate-clock";
clocks = <&clkdiv32k_ick>;
@ -556,7 +556,7 @@
reg = <0x8c90>;
};
gpio5_dbclk: gpio5_dbclk {
gpio5_dbclk: gpio5_dbclk@8c98 {
#clock-cells = <0>;
compatible = "ti,gate-clock";
clocks = <&clkdiv32k_ick>;
@ -572,7 +572,7 @@
clock-div = <2>;
};
gfx_fclk_clksel_ck: gfx_fclk_clksel_ck {
gfx_fclk_clksel_ck: gfx_fclk_clksel_ck@423c {
#clock-cells = <0>;
compatible = "ti,mux-clock";
clocks = <&sysclk_div>, <&dpll_per_m2_ck>;
@ -580,7 +580,7 @@
reg = <0x423c>;
};
gfx_fck_div_ck: gfx_fck_div_ck {
gfx_fck_div_ck: gfx_fck_div_ck@423c {
#clock-cells = <0>;
compatible = "ti,divider-clock";
clocks = <&gfx_fclk_clksel_ck>;
@ -588,7 +588,7 @@
ti,max-div = <2>;
};
disp_clk: disp_clk {
disp_clk: disp_clk@4244 {
#clock-cells = <0>;
compatible = "ti,mux-clock";
clocks = <&dpll_disp_m2_ck>, <&dpll_core_m5_ck>, <&dpll_per_m2_ck>;
@ -596,14 +596,14 @@
ti,set-rate-parent;
};
dpll_extdev_ck: dpll_extdev_ck {
dpll_extdev_ck: dpll_extdev_ck@2e60 {
#clock-cells = <0>;
compatible = "ti,am3-dpll-clock";
clocks = <&sys_clkin_ck>, <&sys_clkin_ck>;
reg = <0x2e60>, <0x2e64>, <0x2e6c>;
};
dpll_extdev_m2_ck: dpll_extdev_m2_ck {
dpll_extdev_m2_ck: dpll_extdev_m2_ck@2e70 {
#clock-cells = <0>;
compatible = "ti,divider-clock";
clocks = <&dpll_extdev_ck>;
@ -614,14 +614,14 @@
ti,invert-autoidle-bit;
};
mux_synctimer32k_ck: mux_synctimer32k_ck {
mux_synctimer32k_ck: mux_synctimer32k_ck@4230 {
#clock-cells = <0>;
compatible = "ti,mux-clock";
clocks = <&clk_32768_ck>, <&clk_32k_tpm_ck>, <&clkdiv32k_ick>;
reg = <0x4230>;
};
synctimer_32kclk: synctimer_32kclk {
synctimer_32kclk: synctimer_32kclk@2a30 {
#clock-cells = <0>;
compatible = "ti,gate-clock";
clocks = <&mux_synctimer32k_ck>;
@ -629,28 +629,28 @@
reg = <0x2a30>;
};
timer8_fck: timer8_fck {
timer8_fck: timer8_fck@421c {
#clock-cells = <0>;
compatible = "ti,mux-clock";
clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>, <&clk_32k_tpm_ck>;
reg = <0x421c>;
};
timer9_fck: timer9_fck {
timer9_fck: timer9_fck@4220 {
#clock-cells = <0>;
compatible = "ti,mux-clock";
clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>, <&clk_32k_tpm_ck>;
reg = <0x4220>;
};
timer10_fck: timer10_fck {
timer10_fck: timer10_fck@4224 {
#clock-cells = <0>;
compatible = "ti,mux-clock";
clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>, <&clk_32k_tpm_ck>;
reg = <0x4224>;
};
timer11_fck: timer11_fck {
timer11_fck: timer11_fck@4228 {
#clock-cells = <0>;
compatible = "ti,mux-clock";
clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>, <&clk_32k_tpm_ck>;
@ -679,7 +679,7 @@
clocks = <&dpll_ddr_ck>;
};
dpll_ddr_m4_ck: dpll_ddr_m4_ck {
dpll_ddr_m4_ck: dpll_ddr_m4_ck@2db8 {
#clock-cells = <0>;
compatible = "ti,divider-clock";
clocks = <&dpll_ddr_x2_ck>;
@ -690,7 +690,7 @@
ti,invert-autoidle-bit;
};
dpll_per_clkdcoldo: dpll_per_clkdcoldo {
dpll_per_clkdcoldo: dpll_per_clkdcoldo@2e14 {
#clock-cells = <0>;
compatible = "ti,fixed-factor-clock";
clocks = <&dpll_per_ck>;
@ -701,7 +701,7 @@
ti,invert-autoidle-bit;
};
dll_aging_clk_div: dll_aging_clk_div {
dll_aging_clk_div: dll_aging_clk_div@4250 {
#clock-cells = <0>;
compatible = "ti,divider-clock";
clocks = <&sys_clkin_ck>;
@ -733,14 +733,14 @@
clock-div = <2>;
};
usbphy_32khz_clkmux: usbphy_32khz_clkmux {
usbphy_32khz_clkmux: usbphy_32khz_clkmux@4260 {
#clock-cells = <0>;
compatible = "ti,mux-clock";
clocks = <&clk_32768_ck>, <&clk_32k_tpm_ck>;
reg = <0x4260>;
};
usb_phy0_always_on_clk32k: usb_phy0_always_on_clk32k {
usb_phy0_always_on_clk32k: usb_phy0_always_on_clk32k@2a40 {
#clock-cells = <0>;
compatible = "ti,gate-clock";
clocks = <&usbphy_32khz_clkmux>;
@ -748,7 +748,7 @@
reg = <0x2a40>;
};
usb_phy1_always_on_clk32k: usb_phy1_always_on_clk32k {
usb_phy1_always_on_clk32k: usb_phy1_always_on_clk32k@2a48 {
#clock-cells = <0>;
compatible = "ti,gate-clock";
clocks = <&usbphy_32khz_clkmux>;
@ -756,7 +756,7 @@
reg = <0x2a48>;
};
usb_otg_ss0_refclk960m: usb_otg_ss0_refclk960m {
usb_otg_ss0_refclk960m: usb_otg_ss0_refclk960m@8a60 {
#clock-cells = <0>;
compatible = "ti,gate-clock";
clocks = <&dpll_per_clkdcoldo>;
@ -764,11 +764,65 @@
reg = <0x8a60>;
};
usb_otg_ss1_refclk960m: usb_otg_ss1_refclk960m {
usb_otg_ss1_refclk960m: usb_otg_ss1_refclk960m@8a68 {
#clock-cells = <0>;
compatible = "ti,gate-clock";
clocks = <&dpll_per_clkdcoldo>;
ti,bit-shift = <8>;
reg = <0x8a68>;
};
clkout1_osc_div_ck: clkout1_osc_div_ck {
#clock-cells = <0>;
compatible = "ti,divider-clock";
clocks = <&sys_clkin_ck>;
ti,bit-shift = <20>;
ti,max-div = <4>;
reg = <0x4100>;
};
clkout1_src2_mux_ck: clkout1_src2_mux_ck {
#clock-cells = <0>;
compatible = "ti,mux-clock";
clocks = <&clk_rc32k_ck>, <&sysclk_div>, <&dpll_ddr_m2_ck>,
<&dpll_per_m2_ck>, <&dpll_disp_m2_ck>,
<&dpll_mpu_m2_ck>;
reg = <0x4100>;
};
clkout1_src2_pre_div_ck: clkout1_src2_pre_div_ck {
#clock-cells = <0>;
compatible = "ti,divider-clock";
clocks = <&clkout1_src2_mux_ck>;
ti,bit-shift = <4>;
ti,max-div = <8>;
reg = <0x4100>;
};
clkout1_src2_post_div_ck: clkout1_src2_post_div_ck {
#clock-cells = <0>;
compatible = "ti,divider-clock";
clocks = <&clkout1_src2_pre_div_ck>;
ti,bit-shift = <8>;
ti,max-div = <32>;
ti,index-power-of-two;
reg = <0x4100>;
};
clkout1_mux_ck: clkout1_mux_ck {
#clock-cells = <0>;
compatible = "ti,mux-clock";
clocks = <&clkout1_osc_div_ck>, <&clk_rc32k_ck>,
<&clkout1_src2_post_div_ck>, <&dpll_extdev_m2_ck>;
ti,bit-shift = <16>;
reg = <0x4100>;
};
clkout1_ck: clkout1_ck {
#clock-cells = <0>;
compatible = "ti,gate-clock";
clocks = <&clkout1_mux_ck>;
ti,bit-shift = <23>;
reg = <0x4100>;
};
};

85
arch/arm/boot/dts/am572x-idk.dts Normal file
View File

@ -0,0 +1,85 @@
/*
* Copyright (C) 2015-2016 Texas Instruments Incorporated - http://www.ti.com/
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
/dts-v1/;
#include "dra74x.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include "am57xx-idk-common.dtsi"
/ {
model = "TI AM5728 IDK";
compatible = "ti,am5728-idk", "ti,am5728", "ti,dra742", "ti,dra74",
"ti,dra7";
memory {
device_type = "memory";
reg = <0x0 0x80000000 0x0 0x80000000>;
};
extcon_usb2: extcon_usb2 {
compatible = "linux,extcon-usb-gpio";
id-gpio = <&gpio3 16 GPIO_ACTIVE_HIGH>;
};
status-leds {
compatible = "gpio-leds";
cpu0-led {
label = "status0:red:cpu0";
gpios = <&gpio4 0 GPIO_ACTIVE_HIGH>;
default-state = "off";
linux,default-trigger = "cpu0";
};
usr0-led {
label = "status0:green:usr";
gpios = <&gpio3 11 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
heartbeat-led {
label = "status0:blue:heartbeat";
gpios = <&gpio3 12 GPIO_ACTIVE_HIGH>;
default-state = "off";
linux,default-trigger = "heartbeat";
};
cpu1-led {
label = "status1:red:cpu1";
gpios = <&gpio3 10 GPIO_ACTIVE_HIGH>;
default-state = "off";
linux,default-trigger = "cpu1";
};
usr1-led {
label = "status1:green:usr";
gpios = <&gpio7 23 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
mmc0-led {
label = "status1:blue:mmc0";
gpios = <&gpio7 22 GPIO_ACTIVE_HIGH>;
default-state = "off";
linux,default-trigger = "mmc0";
};
};
};
&omap_dwc3_2 {
extcon = <&extcon_usb2>;
};
&mmc1 {
status = "okay";
vmmc-supply = <&v3_3d>;
vmmc_aux-supply = <&ldo1_reg>;
bus-width = <4>;
cd-gpios = <&gpio6 27 0>; /* gpio 219 */
};

14
arch/arm/boot/dts/am57xx-beagle-x15.dts
View File

@ -8,6 +8,7 @@
/dts-v1/;
#include "dra74x.dtsi"
#include "am57xx-commercial-grade.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/interrupt-controller/irq.h>
@ -144,7 +145,7 @@
};
};
sound0: sound@0 {
sound0: sound0 {
compatible = "simple-audio-card";
simple-audio-card,name = "BeagleBoard-X15";
simple-audio-card,widgets =
@ -166,8 +167,6 @@
sound0_master: simple-audio-card,codec {
sound-dai = <&tlv320aic3104>;
assigned-clocks = <&clkoutmux2_clk_mux>;
assigned-clock-parents = <&sys_clk2_dclk_div>;
clocks = <&clkout2_clk>;
};
};
@ -427,7 +426,7 @@
/* VDD_DSPEVE, VDD_IVA, VDD_GPU */
regulator-name = "smps45";
regulator-min-microvolt = < 850000>;
regulator-max-microvolt = <1150000>;
regulator-max-microvolt = <1250000>;
regulator-always-on;
regulator-boot-on;
};
@ -436,7 +435,7 @@
/* VDD_CORE */
regulator-name = "smps6";
regulator-min-microvolt = <850000>;
regulator-max-microvolt = <1030000>;
regulator-max-microvolt = <1150000>;
regulator-always-on;
regulator-boot-on;
};
@ -571,6 +570,9 @@
pinctrl-names = "default", "sleep";
pinctrl-0 = <&clkout2_pins_default>;
pinctrl-1 = <&clkout2_pins_sleep>;
assigned-clocks = <&clkoutmux2_clk_mux>;
assigned-clock-parents = <&sys_clk2_dclk_div>;
status = "okay";
adc-settle-ms = <40>;
@ -795,6 +797,8 @@
serial-dir = < /* 0: INACTIVE, 1: TX, 2: RX */
1 2 0 0
>;
tx-num-evt = <32>;
rx-num-evt = <32>;
};
&mailbox5 {

2
arch/arm/boot/dts/am57xx-cl-som-am57x.dts
View File

@ -51,7 +51,7 @@
regulator-max-microvolt = <3300000>;
};
sound0: sound@0 {
sound0: sound0 {
compatible = "simple-audio-card";
simple-audio-card,name = "CL-SOM-AM57x-Sound-Card";
simple-audio-card,format = "i2s";

23
arch/arm/boot/dts/am57xx-commercial-grade.dtsi Normal file
View File

@ -0,0 +1,23 @@
&cpu_alert0 {
temperature = <80000>; /* milliCelsius */
};
&cpu_crit {
temperature = <90000>; /* milliCelsius */
};
&gpu_crit {
temperature = <90000>; /* milliCelsius */
};
&core_crit {
temperature = <90000>; /* milliCelsius */
};
&dspeve_crit {
temperature = <90000>; /* milliCelsius */
};
&iva_crit {
temperature = <90000>; /* milliCelsius */
};

304
arch/arm/boot/dts/am57xx-idk-common.dtsi Normal file
View File

@ -0,0 +1,304 @@
/*
* Copyright (C) 2015-2016 Texas Instruments Incorporated - http://www.ti.com/
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include "am57xx-industrial-grade.dtsi"
/ {
aliases {
rtc0 = &tps659038_rtc;
rtc1 = &rtc;
};
vmain: fixedregulator-vmain {
compatible = "regulator-fixed";
regulator-name = "VMAIN";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
regulator-always-on;
regulator-boot-on;
};
v3_3d: fixedregulator-v3_3d {
compatible = "regulator-fixed";
regulator-name = "V3_3D";
vin-supply = <&smps9_reg>;
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
regulator-boot-on;
};
vtt_fixed: fixedregulator-vtt {
/* TPS51200 */
compatible = "regulator-fixed";
regulator-name = "vtt_fixed";
vin-supply = <&v3_3d>;
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
regulator-boot-on;
};
};
&i2c1 {
status = "okay";
clock-frequency = <400000>;
tps659038: tps659038@58 {
compatible = "ti,tps659038";
reg = <0x58>;
interrupts-extended = <&gpio6 16 IRQ_TYPE_LEVEL_HIGH
&dra7_pmx_core 0x418>;
#interrupt-cells = <2>;
interrupt-controller;
ti,system-power-controller;
tps659038_pmic {
compatible = "ti,tps659038-pmic";
regulators {
smps12_reg: smps12 {
/* VDD_MPU */
vin-supply = <&vmain>;
regulator-name = "smps12";
regulator-min-microvolt = <850000>;
regulator-max-microvolt = <1250000>;
regulator-always-on;
regulator-boot-on;
};
smps3_reg: smps3 {
/* VDD_DDR EMIF1 EMIF2 */
vin-supply = <&vmain>;
regulator-name = "smps3";
regulator-min-microvolt = <1350000>;
regulator-max-microvolt = <1350000>;
regulator-always-on;
regulator-boot-on;
};
smps45_reg: smps45 {
/* VDD_DSPEVE on AM572 */
/* VDD_IVA + VDD_DSP on AM571 */
vin-supply = <&vmain>;
regulator-name = "smps45";
regulator-min-microvolt = <850000>;
regulator-max-microvolt = <1250000>;
regulator-always-on;
regulator-boot-on;
};
smps6_reg: smps6 {
/* VDD_GPU */
vin-supply = <&vmain>;
regulator-name = "smps6";
regulator-min-microvolt = <850000>;
regulator-max-microvolt = <1250000>;
regulator-always-on;
regulator-boot-on;
};
smps7_reg: smps7 {
/* VDD_CORE */
vin-supply = <&vmain>;
regulator-name = "smps7";
regulator-min-microvolt = <850000>;
regulator-max-microvolt = <1150000>;
regulator-always-on;
regulator-boot-on;
};
smps8_reg: smps8 {
/* 5728 - VDD_IVAHD */
/* 5718 - N.C. test point */
vin-supply = <&vmain>;
regulator-name = "smps8";
};
smps9_reg: smps9 {
/* VDD_3_3D */
vin-supply = <&vmain>;
regulator-name = "smps9";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
regulator-boot-on;
};
ldo1_reg: ldo1 {
/* VDDSHV8 - VSDMMC */
/* NOTE: on rev 1.3a, data supply */
vin-supply = <&vmain>;
regulator-name = "ldo1";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3300000>;
regulator-boot-on;
regulator-always-on;
};
ldo2_reg: ldo2 {
/* VDDSH18V */
vin-supply = <&vmain>;
regulator-name = "ldo2";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
regulator-boot-on;
};
ldo3_reg: ldo3 {
/* R1.3a 572x V1_8PHY_LDO3: USB, SATA */
vin-supply = <&vmain>;
regulator-name = "ldo3";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
regulator-boot-on;
};
ldo4_reg: ldo4 {
/* R1.3a 572x V1_8PHY_LDO4: PCIE, HDMI*/
vin-supply = <&vmain>;
regulator-name = "ldo4";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
regulator-boot-on;
};
/* LDO5-8 unused */
ldo9_reg: ldo9 {
/* VDD_RTC */
vin-supply = <&vmain>;
regulator-name = "ldo9";
regulator-min-microvolt = <840000>;
regulator-max-microvolt = <1160000>;
regulator-always-on;
regulator-boot-on;
};
ldoln_reg: ldoln {
/* VDDA_1V8_PLL */
vin-supply = <&vmain>;
regulator-name = "ldoln";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
regulator-boot-on;
};
ldousb_reg: ldousb {
/* VDDA_3V_USB: VDDA_USBHS33 */
vin-supply = <&vmain>;
regulator-name = "ldousb";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
regulator-boot-on;
};
ldortc_reg: ldortc {
/* VDDA_RTC */
vin-supply = <&vmain>;
regulator-name = "ldortc";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
regulator-boot-on;
};
regen1: regen1 {
/* VDD_3V3_ON */
regulator-name = "regen1";
regulator-boot-on;
regulator-always-on;
};
regen2: regen2 {
/* Needed for PMIC internal resource */
regulator-name = "regen2";
regulator-boot-on;
regulator-always-on;
};
};
};
tps659038_rtc: tps659038_rtc {
compatible = "ti,palmas-rtc";
interrupt-parent = <&tps659038>;
interrupts = <8 IRQ_TYPE_EDGE_FALLING>;
wakeup-source;
};
tps659038_pwr_button: tps659038_pwr_button {
compatible = "ti,palmas-pwrbutton";
interrupt-parent = <&tps659038>;
interrupts = <1 IRQ_TYPE_EDGE_FALLING>;
wakeup-source;
ti,palmas-long-press-seconds = <12>;
};
tps659038_gpio: tps659038_gpio {
compatible = "ti,palmas-gpio";
gpio-controller;
#gpio-cells = <2>;
};
};
};
&uart3 {
status = "okay";
interrupts-extended = <&crossbar_mpu GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH
&dra7_pmx_core 0x248>;
};
&rtc {
status = "okay";
ext-clk-src;
};
&mac {
status = "okay";
dual_emac;
};
&cpsw_emac0 {
phy_id = <&davinci_mdio>, <0>;
phy-mode = "rgmii";
dual_emac_res_vlan = <1>;
};
&cpsw_emac1 {
phy_id = <&davinci_mdio>, <1>;
phy-mode = "rgmii";
dual_emac_res_vlan = <2>;
};
&usb2_phy1 {
phy-supply = <&ldousb_reg>;
};
&usb2_phy2 {
phy-supply = <&ldousb_reg>;
};
&usb1 {
dr_mode = "host";
};
&usb2 {
dr_mode = "otg";
};
&mmc2 {
status = "okay";
vmmc-supply = <&v3_3d>;
bus-width = <8>;
ti,non-removable;
max-frequency = <96000000>;
};

23
arch/arm/boot/dts/am57xx-industrial-grade.dtsi Normal file
View File

@ -0,0 +1,23 @@
&cpu_alert0 {
temperature = <90000>; /* milliCelsius */
};
&cpu_crit {
temperature = <105000>; /* milliCelsius */
};
&gpu_crit {
temperature = <105000>; /* milliCelsius */
};
&core_crit {
temperature = <105000>; /* milliCelsius */
};
&dspeve_crit {
temperature = <105000>; /* milliCelsius */
};
&iva_crit {
temperature = <105000>; /* milliCelsius */
};

93
arch/arm/boot/dts/arm-realview-eb-11mp-revb.dts Normal file
View File

@ -0,0 +1,93 @@
/*
* Copyright 2016 Linaro Ltd
*
* Permission is hereby granted, free of charge, to any person obtaining a copy
* of this software and associated documentation files (the "Software"), to deal
* in the Software without restriction, including without limitation the rights
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
* copies of the Software, and to permit persons to whom the Software is
* furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in
* all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
* THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
* THE SOFTWARE.
*/
#include "arm-realview-eb-11mp.dts"
/ {
model = "ARM RealView Emulation Baseboard with ARM11MPCore Rev B";
};
/*
* The revision B has a distinctly different layout of the syscon, so
* append a specific compatible-string.
*/
&syscon {
compatible = "arm,realview-eb11mp-revb-syscon", "arm,realview-eb-syscon", "syscon", "simple-mfd";
};
&intc {
reg = <0x10101000 0x1000>,
<0x10100100 0x100>;
};
&L2 {
reg = <0x10102000 0x1000>;
};
&scu {
reg = <0x10100000 0x100>;
};
&twd_timer {
reg = <0x10100600 0x20>;
};
&twd_wdog {
reg = <0x10100620 0x20>;
};
/*
* On revision B, we cannot reach the secondary interrupt
* controller, as a result, some peripherals that are dependent
* on their IRQ cannot be reached, so disable them.
*/
&intc_second {
status = "disabled";
};
&gpio0 {
status = "disabled";
};
&gpio1 {
status = "disabled";
};
&gpio2 {
status = "disabled";
};
&serial2 {
status = "disabled";
};
&serial3 {
status = "disabled";
};
&ssp {
status = "disabled";
};
&wdog {
status = "disabled";
};

74
arch/arm/boot/dts/arm-realview-eb-11mp.dts Normal file
View File

@ -0,0 +1,74 @@
/*
* Copyright 2016 Linaro Ltd
*
* Permission is hereby granted, free of charge, to any person obtaining a copy
* of this software and associated documentation files (the "Software"), to deal
* in the Software without restriction, including without limitation the rights
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
* copies of the Software, and to permit persons to whom the Software is
* furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in
* all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
* THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
* THE SOFTWARE.
*/
/dts-v1/;
#include "arm-realview-eb-mp.dtsi"
/ {
model = "ARM RealView Emulation Baseboard with ARM11MPCore Rev C";
arm,hbi = <0x146>;
/*
* This is the ARM11 MPCore tile (HBI-0146) used with the RealView EB.
* Reference: ARM DUI 0318F
*
* To run this machine with QEMU, specify the following:
* qemu-system-arm -M realview-eb-mpcore -smp cpus=4
*/
cpus {
#address-cells = <1>;
#size-cells = <0>;
enable-method = "arm,realview-smp";
MP11_0: cpu@0 {
device_type = "cpu";
compatible = "arm,arm11mpcore";
reg = <0>;
next-level-cache = <&L2>;
};
MP11_1: cpu@1 {
device_type = "cpu";
compatible = "arm,arm11mpcore";
reg = <1>;
next-level-cache = <&L2>;
};
MP11_2: cpu@2 {
device_type = "cpu";
compatible = "arm,arm11mpcore";
reg = <2>;
next-level-cache = <&L2>;
};
MP11_3: cpu@3 {
device_type = "cpu";
compatible = "arm,arm11mpcore";
reg = <3>;
next-level-cache = <&L2>;
};
};
};
&pmu {
interrupt-affinity = <&MP11_0>, <&MP11_1>, <&MP11_2>, <&MP11_3>;
};

70
arch/arm/boot/dts/arm-realview-eb-a9mp.dts Normal file
View File

@ -0,0 +1,70 @@
/*
* Copyright 2016 Linaro Ltd
*
* Permission is hereby granted, free of charge, to any person obtaining a copy
* of this software and associated documentation files (the "Software"), to deal
* in the Software without restriction, including without limitation the rights
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
* copies of the Software, and to permit persons to whom the Software is
* furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in
* all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
* THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
* THE SOFTWARE.
*/
/dts-v1/;
#include "arm-realview-eb-mp.dtsi"
/ {
model = "ARM RealView EB Cortex A9 MPCore";
/*
* This is the Cortex A9 MPCore tile used with the
* RealView EB.
*/
cpus {
#address-cells = <1>;
#size-cells = <0>;
enable-method = "arm,realview-smp";
A9_0: cpu@0 {
device_type = "cpu";
compatible = "arm,cortex-a9";
reg = <0>;
next-level-cache = <&L2>;
};
A9_1: cpu@1 {
device_type = "cpu";
compatible = "arm,cortex-a9";
reg = <1>;
next-level-cache = <&L2>;
};
A9_2: cpu@2 {
device_type = "cpu";
compatible = "arm,cortex-a9";
reg = <2>;
next-level-cache = <&L2>;
};
A9_3: cpu@3 {
device_type = "cpu";
compatible = "arm,cortex-a9";
reg = <3>;
next-level-cache = <&L2>;
};
};
};
&pmu {
interrupt-affinity = <&A9_0>, <&A9_1>, <&A9_2>, <&A9_3>;
};

225
arch/arm/boot/dts/arm-realview-eb-mp.dtsi Normal file
View File

@ -0,0 +1,225 @@
/*
* Copyright 2016 Linaro Ltd
*
* Permission is hereby granted, free of charge, to any person obtaining a copy
* of this software and associated documentation files (the "Software"), to deal
* in the Software without restriction, including without limitation the rights
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
* copies of the Software, and to permit persons to whom the Software is
* furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in
* all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
* THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
* THE SOFTWARE.
*/
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/gpio/gpio.h>
#include "arm-realview-eb.dtsi"
/*
* This is the common include file for all MPCore variants of the
* Evaluation Baseboard, i.e. ARM11MPCore, ARM11MPCore Revision B
* and Cortex-A9 MPCore.
*/
/ {
soc {
#address-cells = <1>;
#size-cells = <1>;
compatible = "arm,realview-eb-soc", "simple-bus";
regmap = <&syscon>;
ranges;
/* Primary interrupt controller in the test chip */
intc: interrupt-controller@1f000100 {
compatible = "arm,eb11mp-gic";
#interrupt-cells = <3>;
#address-cells = <1>;
interrupt-controller;
reg = <0x1f001000 0x1000>,
<0x1f000100 0x100>;
};
/* Secondary interrupt controller on the FPGA */
intc_second: interrupt-controller@10040000 {
compatible = "arm,pl390";
#interrupt-cells = <3>;
#address-cells = <1>;
interrupt-controller;
reg = <0x10041000 0x1000>,
<0x10040000 0x100>;
interrupt-parent = <&intc>;
interrupts = <0 10 IRQ_TYPE_LEVEL_HIGH>;
};
L2: l2-cache {
compatible = "arm,l220-cache";
reg = <0x1f002000 0x1000>;
interrupt-parent = <&intc>;
interrupts = <0 29 IRQ_TYPE_LEVEL_HIGH>,
<0 30 IRQ_TYPE_LEVEL_HIGH>,
<0 31 IRQ_TYPE_LEVEL_HIGH>;
cache-unified;
cache-level = <2>;
/*
* Override default cache size, sets and
* associativity as these may be erroneously set
* up by boot loader(s), probably for safety
* since th outer sync operation can cause the
* cache to hang unless disabled.
*/
cache-size = <1048576>; // 1MB
cache-sets = <4096>;
cache-line-size = <32>;
arm,shared-override;
arm,parity-enable;
arm,outer-sync-disable;
};
scu: scu@1f000000 {
compatible = "arm,arm11mp-scu";
reg = <0x1f000000 0x100>;
};
twd_timer: timer@1f000600 {
compatible = "arm,arm11mp-twd-timer";
reg = <0x1f000600 0x20>;
interrupt-parent = <&intc>;
interrupts = <1 13 0xf04>;
};
twd_wdog: watchdog@1f000620 {
compatible = "arm,arm11mp-twd-wdt";
reg = <0x1f000620 0x20>;
interrupt-parent = <&intc>;
interrupts = <1 14 0xf04>;
};
/* PMU with one IRQ line per core */
pmu: pmu@0 {
compatible = "arm,arm11mpcore-pmu";
interrupt-parent = <&intc>;
interrupts = <0 17 IRQ_TYPE_LEVEL_HIGH>,
<0 18 IRQ_TYPE_LEVEL_HIGH>,
<0 19 IRQ_TYPE_LEVEL_HIGH>,
<0 20 IRQ_TYPE_LEVEL_HIGH>;
};
};
};
/*
* This adapts all the peripherals to the interrupt routing
* to the GIC on the core tile.
*/
&ethernet {
interrupt-parent = <&intc>;
interrupts = <0 9 IRQ_TYPE_LEVEL_HIGH>;
};
&usb {
interrupt-parent = <&intc>;
interrupts = <0 3 IRQ_TYPE_LEVEL_HIGH>;
};
&aaci {
interrupt-parent = <&intc>;
interrupts = <0 0 IRQ_TYPE_LEVEL_HIGH>;
};
&mmc {
interrupt-parent = <&intc>;
interrupts = <0 14 IRQ_TYPE_LEVEL_HIGH>,
<0 15 IRQ_TYPE_LEVEL_HIGH>;
};
&kmi0 {
interrupt-parent = <&intc>;
interrupts = <0 7 IRQ_TYPE_LEVEL_HIGH>;
};
&kmi1 {
interrupt-parent = <&intc>;
interrupts = <0 8 IRQ_TYPE_LEVEL_HIGH>;
};
&charlcd {
interrupt-parent = <&intc>;
interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
};
&serial0 {
interrupt-parent = <&intc>;
interrupts = <0 4 IRQ_TYPE_LEVEL_HIGH>;
};
&serial1 {
interrupt-parent = <&intc>;
interrupts = <0 5 IRQ_TYPE_LEVEL_HIGH>;
};
&timer01 {
interrupt-parent = <&intc>;
interrupts = <0 1 IRQ_TYPE_LEVEL_HIGH>;
};
&timer23 {
interrupt-parent = <&intc>;
interrupts = <0 2 IRQ_TYPE_LEVEL_HIGH>;
};
&rtc {
interrupt-parent = <&intc>;
interrupts = <0 6 IRQ_TYPE_LEVEL_HIGH>;
};
/*
* On revision A, these peripherals does not have their IRQ lines
* routed to the core tile, but they can be reached on the secondary
* GIC.
*/
&gpio0 {
interrupt-parent = <&intc_second>;
interrupts = <0 6 IRQ_TYPE_LEVEL_HIGH>;
};
&gpio1 {
interrupt-parent = <&intc_second>;
interrupts = <0 7 IRQ_TYPE_LEVEL_HIGH>;
};
&gpio2 {
interrupt-parent = <&intc_second>;
interrupts = <0 8 IRQ_TYPE_LEVEL_HIGH>;
};
&serial2 {
interrupt-parent = <&intc_second>;
interrupts = <0 14 IRQ_TYPE_LEVEL_HIGH>;
status = "okay";
};
&serial3 {
interrupt-parent = <&intc_second>;
interrupts = <0 15 IRQ_TYPE_LEVEL_HIGH>;
status = "okay";
};
&ssp {
interrupt-parent = <&intc_second>;
interrupts = <0 11 IRQ_TYPE_LEVEL_HIGH>;
status = "okay";
};
&wdog {
interrupt-parent = <&intc_second>;
interrupts = <0 0 IRQ_TYPE_LEVEL_HIGH>;
status = "okay";
};

166
arch/arm/boot/dts/arm-realview-eb.dts Normal file
View File

@ -0,0 +1,166 @@
/*
* Copyright 2016 Linaro Ltd
*
* Permission is hereby granted, free of charge, to any person obtaining a copy
* of this software and associated documentation files (the "Software"), to deal
* in the Software without restriction, including without limitation the rights
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
* copies of the Software, and to permit persons to whom the Software is
* furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in
* all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
* THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
* THE SOFTWARE.
*/
/dts-v1/;
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/gpio/gpio.h>
#include "arm-realview-eb.dtsi"
/ {
model = "ARM RealView Emulation Baseboard";
compatible = "arm,realview-eb";
arm,hbi = <0x140>;
/*
* This is the core tile with the CPU and GIC etc for the
* ARM926EJ-S, ARM1136, ARM1176 that does not have L2 cache
* or PMU.
*
* To run this machine with QEMU, specify the following:
* qemu-system-arm -M realview-eb
* Unless specified, QEMU will emulate an ARM926EJ-S core tile.
* Switches -cpu arm1136 or -cpu arm1176 emulates the other
* core tiles.
*/
soc {
#address-cells = <1>;
#size-cells = <1>;
compatible = "arm,realview-eb-soc", "simple-bus";
regmap = <&syscon>;
ranges;
intc: interrupt-controller@10040000 {
compatible = "arm,pl390";
#interrupt-cells = <3>;
#address-cells = <1>;
interrupt-controller;
reg = <0x10041000 0x1000>,
<0x10040000 0x100>;
};
};
};
/*
* This adapts all the peripherals to the interrupt routing
* to the GIC on the core tile.
*/
&ethernet {
interrupt-parent = <&intc>;
interrupts = <0 28 IRQ_TYPE_LEVEL_HIGH>;
};
&usb {
interrupt-parent = <&intc>;
interrupts = <0 29 IRQ_TYPE_LEVEL_HIGH>;
};
&aaci {
interrupt-parent = <&intc>;
interrupts = <0 19 IRQ_TYPE_LEVEL_HIGH>;
};
&mmc {
interrupt-parent = <&intc>;
interrupts = <0 17 IRQ_TYPE_LEVEL_HIGH>,
<0 18 IRQ_TYPE_LEVEL_HIGH>;
};
&kmi0 {
interrupt-parent = <&intc>;
interrupts = <0 20 IRQ_TYPE_LEVEL_HIGH>;
};
&kmi1 {
interrupt-parent = <&intc>;
interrupts = <0 21 IRQ_TYPE_LEVEL_HIGH>;
};
&charlcd {
interrupt-parent = <&intc>;
interrupts = <0 22 IRQ_TYPE_LEVEL_HIGH>;
};
&serial0 {
interrupt-parent = <&intc>;
interrupts = <0 12 IRQ_TYPE_LEVEL_HIGH>;
};
&serial1 {
interrupt-parent = <&intc>;
interrupts = <0 13 IRQ_TYPE_LEVEL_HIGH>;
};
&serial2 {
interrupt-parent = <&intc>;
interrupts = <0 14 IRQ_TYPE_LEVEL_HIGH>;
};
&serial3 {
interrupt-parent = <&intc>;
interrupts = <0 15 IRQ_TYPE_LEVEL_HIGH>;
};
&ssp {
interrupt-parent = <&intc>;
interrupts = <0 11 IRQ_TYPE_LEVEL_HIGH>;
};
&wdog {
interrupt-parent = <&intc>;
interrupts = <0 0 IRQ_TYPE_LEVEL_HIGH>;
};
&timer01 {
interrupt-parent = <&intc>;
interrupts = <0 4 IRQ_TYPE_LEVEL_HIGH>;
};
&timer23 {
interrupt-parent = <&intc>;
interrupts = <0 5 IRQ_TYPE_LEVEL_HIGH>;
};
&gpio0 {
interrupt-parent = <&intc>;
interrupts = <0 6 IRQ_TYPE_LEVEL_HIGH>;
};
&gpio1 {
interrupt-parent = <&intc>;
interrupts = <0 7 IRQ_TYPE_LEVEL_HIGH>;
};
&gpio2 {
interrupt-parent = <&intc>;
interrupts = <0 8 IRQ_TYPE_LEVEL_HIGH>;
};
&rtc {
interrupt-parent = <&intc>;
interrupts = <0 10 IRQ_TYPE_LEVEL_HIGH>;
};
&clcd {
interrupt-parent = <&intc>;
interrupts = <0 23 IRQ_TYPE_LEVEL_HIGH>;
};

453
arch/arm/boot/dts/arm-realview-eb.dtsi Normal file
View File

@ -0,0 +1,453 @@
/*
* Copyright 2016 Linaro Ltd
*
* Permission is hereby granted, free of charge, to any person obtaining a copy
* of this software and associated documentation files (the "Software"), to deal
* in the Software without restriction, including without limitation the rights
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
* copies of the Software, and to permit persons to whom the Software is
* furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in
* all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
* THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
* THE SOFTWARE.
*/
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/gpio/gpio.h>
#include "skeleton.dtsi"
/ {
compatible = "arm,realview-eb";
chosen { };
aliases {
serial0 = &serial0;
serial1 = &serial1;
serial2 = &serial2;
serial3 = &serial3;
i2c0 = &i2c;
};
memory {
/* 128 MiB memory @ 0x0 */
reg = <0x00000000 0x08000000>;
};
/* The voltage to the MMC card is hardwired at 3.3V */
vmmc: fixedregulator@0 {
compatible = "regulator-fixed";
regulator-name = "vmmc";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-boot-on;
};
veth: fixedregulator@0 {
compatible = "regulator-fixed";
regulator-name = "veth";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-boot-on;
};
xtal24mhz: xtal24mhz@24M {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <24000000>;
};
timclk: timclk@1M {
#clock-cells = <0>;
compatible = "fixed-factor-clock";
clock-div = <24>;
clock-mult = <1>;
clocks = <&xtal24mhz>;
};
mclk: mclk@24M {
#clock-cells = <0>;
compatible = "fixed-factor-clock";
clock-div = <1>;
clock-mult = <1>;
clocks = <&xtal24mhz>;
};
kmiclk: kmiclk@24M {
#clock-cells = <0>;
compatible = "fixed-factor-clock";
clock-div = <1>;
clock-mult = <1>;
clocks = <&xtal24mhz>;
};
sspclk: sspclk@24M {
#clock-cells = <0>;
compatible = "fixed-factor-clock";
clock-div = <1>;
clock-mult = <1>;
clocks = <&xtal24mhz>;
};
uartclk: uartclk@24M {
#clock-cells = <0>;
compatible = "fixed-factor-clock";
clock-div = <1>;
clock-mult = <1>;
clocks = <&xtal24mhz>;
};
wdogclk: wdogclk@24M {
#clock-cells = <0>;
compatible = "fixed-factor-clock";
clock-div = <1>;
clock-mult = <1>;
clocks = <&xtal24mhz>;
};
/* FIXME: this actually hangs off the PLL clocks */
pclk: pclk@0 {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <0>;
};
flash0@40000000 {
/* 2 * 32MiB NOR Flash memory */
compatible = "arm,versatile-flash", "cfi-flash";
reg = <0x40000000 0x04000000>;
bank-width = <4>;
};
flash1@44000000 {
/* 2 * 32MiB NOR Flash memory */
compatible = "arm,versatile-flash", "cfi-flash";
reg = <0x44000000 0x04000000>;
bank-width = <4>;
};
/* SMSC 9118 ethernet with PHY and EEPROM */
ethernet: ethernet@4e000000 {
compatible = "smsc,lan9118", "smsc,lan9115";
reg = <0x4e000000 0x10000>;
phy-mode = "mii";
reg-io-width = <4>;
smsc,irq-active-high;
smsc,irq-push-pull;
vdd33a-supply = <&veth>;
vddvario-supply = <&veth>;
};
usb: usb@4f000000 {
compatible = "nxp,usb-isp1761";
reg = <0x4f000000 0x20000>;
port1-otg;
};
/* These peripherals are inside the FPGA */
fpga {
#address-cells = <1>;
#size-cells = <1>;
compatible = "simple-bus";
ranges;
syscon: syscon@10000000 {
compatible = "arm,realview-eb-syscon", "syscon", "simple-mfd";
reg = <0x10000000 0x1000>;
led@08.0 {
compatible = "register-bit-led";
offset = <0x08>;
mask = <0x01>;
label = "versatile:0";
linux,default-trigger = "heartbeat";
default-state = "on";
};
led@08.1 {
compatible = "register-bit-led";
offset = <0x08>;
mask = <0x02>;
label = "versatile:1";
linux,default-trigger = "mmc0";
default-state = "off";
};
led@08.2 {
compatible = "register-bit-led";
offset = <0x08>;
mask = <0x04>;
label = "versatile:2";
linux,default-trigger = "cpu0";
default-state = "off";
};
led@08.3 {
compatible = "register-bit-led";
offset = <0x08>;
mask = <0x08>;
label = "versatile:3";
default-state = "off";
};
led@08.4 {
compatible = "register-bit-led";
offset = <0x08>;
mask = <0x10>;
label = "versatile:4";
default-state = "off";
};
led@08.5 {
compatible = "register-bit-led";
offset = <0x08>;
mask = <0x20>;
label = "versatile:5";
default-state = "off";
};
led@08.6 {
compatible = "register-bit-led";
offset = <0x08>;
mask = <0x40>;
label = "versatile:6";
default-state = "off";
};
led@08.7 {
compatible = "register-bit-led";
offset = <0x08>;
mask = <0x80>;
label = "versatile:7";
default-state = "off";
};
oscclk0: osc0@0c {
compatible = "arm,syscon-icst307";
#clock-cells = <0>;
lock-offset = <0x20>;
vco-offset = <0x0C>;
clocks = <&xtal24mhz>;
};
oscclk1: osc1@10 {
compatible = "arm,syscon-icst307";
#clock-cells = <0>;
lock-offset = <0x20>;
vco-offset = <0x10>;
clocks = <&xtal24mhz>;
};
oscclk2: osc2@14 {
compatible = "arm,syscon-icst307";
#clock-cells = <0>;
lock-offset = <0x20>;
vco-offset = <0x14>;
clocks = <&xtal24mhz>;
};
oscclk3: osc3@18 {
compatible = "arm,syscon-icst307";
#clock-cells = <0>;
lock-offset = <0x20>;
vco-offset = <0x18>;
clocks = <&xtal24mhz>;
};
oscclk4: osc4@1c {
compatible = "arm,syscon-icst307";
#clock-cells = <0>;
lock-offset = <0x20>;
vco-offset = <0x1c>;
clocks = <&xtal24mhz>;
};
};
i2c: i2c@10002000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "arm,versatile-i2c";
reg = <0x10002000 0x1000>;
rtc@68 {
compatible = "dallas,ds1338";
reg = <0x68>;
};
};
aaci: aaci@10004000 {
compatible = "arm,pl041", "arm,primecell";
reg = <0x10004000 0x1000>;
clocks = <&pclk>;
clock-names = "apb_pclk";
};
mmc: mmcsd@10005000 {
compatible = "arm,pl18x", "arm,primecell";
reg = <0x10005000 0x1000>;
/* Due to frequent FIFO overruns, use just 500 kHz */
max-frequency = <500000>;
bus-width = <4>;
cap-sd-highspeed;
cap-mmc-highspeed;
clocks = <&mclk>, <&pclk>;
clock-names = "mclk", "apb_pclk";
vmmc-supply = <&vmmc>;
cd-gpios = <&gpio1 0 GPIO_ACTIVE_LOW>;
wp-gpios = <&gpio1 1 GPIO_ACTIVE_HIGH>;
};
kmi0: kmi@10006000 {
compatible = "arm,pl050", "arm,primecell";
reg = <0x10006000 0x1000>;
clocks = <&kmiclk>, <&pclk>;
clock-names = "KMIREFCLK", "apb_pclk";
};
kmi1: kmi@10007000 {
compatible = "arm,pl050", "arm,primecell";
reg = <0x10007000 0x1000>;
clocks = <&kmiclk>, <&pclk>;
clock-names = "KMIREFCLK", "apb_pclk";
};
charlcd: fpga_charlcd: charlcd@10008000 {
compatible = "arm,versatile-lcd";
reg = <0x10008000 0x1000>;
clocks = <&pclk>;
clock-names = "apb_pclk";
};
serial0: serial@10009000 {
compatible = "arm,pl011", "arm,primecell";
reg = <0x10009000 0x1000>;
clocks = <&uartclk>, <&pclk>;
clock-names = "uartclk", "apb_pclk";
};
serial1: serial@1000a000 {
compatible = "arm,pl011", "arm,primecell";
reg = <0x1000a000 0x1000>;
clocks = <&uartclk>, <&pclk>;
clock-names = "uartclk", "apb_pclk";
};
serial2: serial@1000b000 {
compatible = "arm,pl011", "arm,primecell";
reg = <0x1000b000 0x1000>;
clocks = <&uartclk>, <&pclk>;
clock-names = "uartclk", "apb_pclk";
};
serial3: serial@1000c000 {
compatible = "arm,pl011", "arm,primecell";
reg = <0x1000c000 0x1000>;
clocks = <&uartclk>, <&pclk>;
clock-names = "uartclk", "apb_pclk";
};
ssp: ssp@1000d000 {
compatible = "arm,pl022", "arm,primecell";
reg = <0x1000d000 0x1000>;
clocks = <&sspclk>, <&pclk>;
clock-names = "SSPCLK", "apb_pclk";
};
wdog: watchdog@10010000 {
compatible = "arm,sp805", "arm,primecell";
reg = <0x10010000 0x1000>;
clocks = <&wdogclk>, <&pclk>;
clock-names = "wdogclk", "apb_pclk";
status = "disabled";
};
timer01: timer@10011000 {
compatible = "arm,sp804", "arm,primecell";
reg = <0x10011000 0x1000>;
clocks = <&timclk>, <&timclk>, <&pclk>;
clock-names = "timer1", "timer2", "apb_pclk";
};
timer23: timer@10012000 {
compatible = "arm,sp804", "arm,primecell";
reg = <0x10012000 0x1000>;
clocks = <&timclk>, <&timclk>, <&pclk>;
clock-names = "timer1", "timer2", "apb_pclk";
};
gpio0: gpio@10013000 {
compatible = "arm,pl061", "arm,primecell";
reg = <0x10013000 0x1000>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
clocks = <&pclk>;
clock-names = "apb_pclk";
};
gpio1: gpio@10014000 {
compatible = "arm,pl061", "arm,primecell";
reg = <0x10014000 0x1000>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
clocks = <&pclk>;
clock-names = "apb_pclk";
};
gpio2: gpio@10015000 {
compatible = "arm,pl061", "arm,primecell";
reg = <0x10015000 0x1000>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
clocks = <&pclk>;
clock-names = "apb_pclk";
};
rtc: rtc@10017000 {
compatible = "arm,pl031", "arm,primecell";
reg = <0x10017000 0x1000>;
clocks = <&pclk>;
clock-names = "apb_pclk";
};
clcd: clcd@10020000 {
compatible = "arm,pl111", "arm,primecell";
reg = <0x10020000 0x1000>;
interrupt-names = "combined";
clocks = <&oscclk0>, <&pclk>;
clock-names = "clcdclk", "apb_pclk";
port {
clcd_pads: endpoint {
remote-endpoint = <&clcd_panel>;
arm,pl11x,tft-r0g0b0-pads = <0 8 16>;
};
};
panel {
compatible = "panel-dpi";
port {
clcd_panel: endpoint {
remote-endpoint = <&clcd_pads>;
};
};
/* Standard 640x480 VGA timings */
panel-timing {
clock-frequency = <25175000>;
hactive = <640>;
hback-porch = <48>;
hfront-porch = <16>;
hsync-len = <96>;
vactive = <480>;
vback-porch = <33>;
vfront-porch = <10>;
vsync-len = <2>;
};
};
};
};
};

40
arch/arm/boot/dts/arm-realview-pb1176.dts
View File

@ -394,6 +394,46 @@
reg = <0x10200000 0x4000>;
bank-width = <1>;
};
clcd@10112000 {
compatible = "arm,pl111", "arm,primecell";
reg = <0x10112000 0x1000>;
interrupt-parent = <&intc_dc1176>;
interrupt-names = "combined";
interrupts = <0 47 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&oscclk0>, <&pclk>;
clock-names = "clcdclk", "apb_pclk";
port {
clcd_pads: endpoint {
remote-endpoint = <&clcd_panel>;
arm,pl11x,tft-r0g0b0-pads = <0 8 16>;
};
};
panel {
compatible = "panel-dpi";
port {
clcd_panel: endpoint {
remote-endpoint = <&clcd_pads>;
};
};
/* Standard 640x480 VGA timings */
panel-timing {
clock-frequency = <25175000>;
hactive = <640>;
hback-porch = <48>;
hfront-porch = <16>;
hsync-len = <96>;
vactive = <480>;
vback-porch = <33>;
vfront-porch = <10>;
vsync-len = <2>;
};
};
};
};
/* These peripherals are inside the FPGA rather than the DevChip */

19
arch/arm/boot/dts/arm-realview-pb11mp.dts
View File

@ -627,16 +627,17 @@
};
};
/* Standard 640x480 VGA timings */
panel-timing {
clock-frequency = <63500127>;
hactive = <1024>;
hback-porch = <152>;
hfront-porch = <48>;
hsync-len = <104>;
vactive = <768>;
vback-porch = <23>;
vfront-porch = <3>;
vsync-len = <4>;
clock-frequency = <25175000>;
hactive = <640>;
hback-porch = <48>;
hfront-porch = <16>;
hsync-len = <96>;
vactive = <480>;
vback-porch = <33>;
vfront-porch = <10>;
vsync-len = <2>;
};
};
};

178
arch/arm/boot/dts/arm-realview-pba8.dts Normal file
View File

@ -0,0 +1,178 @@
/*
* Copyright 2016 Linaro Ltd
*
* Permission is hereby granted, free of charge, to any person obtaining a copy
* of this software and associated documentation files (the "Software"), to deal
* in the Software without restriction, including without limitation the rights
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
* copies of the Software, and to permit persons to whom the Software is
* furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in
* all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
* THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
* THE SOFTWARE.
*/
/dts-v1/;
#include "arm-realview-pbx.dtsi"
/ {
model = "ARM RealView Platform Baseboard for Cortex-A8";
compatible = "arm,realview-pba8";
arm,hbi = <0x178>;
cpus {
#address-cells = <1>;
#size-cells = <0>;
enable-method = "arm,realview-smp";
cpu0: cpu@0 {
device_type = "cpu";
compatible = "arm,cortex-a8";
reg = <0>;
};
};
pmu: pmu@0 {
compatible = "arm,cortex-a8-pmu";
interrupt-parent = <&intc>;
interrupts = <0 47 IRQ_TYPE_LEVEL_HIGH>;
interrupt-affinity = <&cpu0>;
};
/* Primary GIC PL390 interrupt controller in the test chip */
intc: interrupt-controller@1e000000 {
compatible = "arm,pl390";
#interrupt-cells = <3>;
#address-cells = <1>;
interrupt-controller;
reg = <0x1e001000 0x1000>,
<0x1e000000 0x100>;
};
};
&ethernet {
interrupt-parent = <&intc>;
interrupts = <0 28 IRQ_TYPE_LEVEL_HIGH>;
};
&usb {
interrupt-parent = <&intc>;
interrupts = <0 29 IRQ_TYPE_LEVEL_HIGH>;
};
&soc {
compatible = "arm,realview-pba8-soc", "simple-bus";
};
&syscon {
compatible = "arm,realview-pba8-syscon", "syscon", "simple-mfd";
};
&serial0 {
interrupt-parent = <&intc>;
interrupts = <0 12 IRQ_TYPE_LEVEL_HIGH>;
};
&serial1 {
interrupt-parent = <&intc>;
interrupts = <0 13 IRQ_TYPE_LEVEL_HIGH>;
};
&serial2 {
interrupt-parent = <&intc>;
interrupts = <0 14 IRQ_TYPE_LEVEL_HIGH>;
};
&serial3 {
interrupt-parent = <&intc>;
interrupts = <0 15 IRQ_TYPE_LEVEL_HIGH>;
};
&ssp {
interrupt-parent = <&intc>;
interrupts = <0 11 IRQ_TYPE_LEVEL_HIGH>;
};
&wdog0 {
interrupt-parent = <&intc>;
interrupts = <0 0 IRQ_TYPE_LEVEL_HIGH>;
};
&wdog1 {
interrupt-parent = <&intc>;
interrupts = <0 40 IRQ_TYPE_LEVEL_HIGH>;
};
&timer01 {
interrupt-parent = <&intc>;
interrupts = <0 4 IRQ_TYPE_LEVEL_HIGH>;
};
&timer23 {
interrupt-parent = <&intc>;
interrupts = <0 5 IRQ_TYPE_LEVEL_HIGH>;
};
&gpio0 {
interrupt-parent = <&intc>;
interrupts = <0 6 IRQ_TYPE_LEVEL_HIGH>;
};
&gpio1 {
interrupt-parent = <&intc>;
interrupts = <0 7 IRQ_TYPE_LEVEL_HIGH>;
};
&gpio2 {
interrupt-parent = <&intc>;
interrupts = <0 8 IRQ_TYPE_LEVEL_HIGH>;
};
&rtc {
interrupt-parent = <&intc>;
interrupts = <0 10 IRQ_TYPE_LEVEL_HIGH>;
};
&timer45 {
interrupt-parent = <&intc>;
interrupts = <0 41 IRQ_TYPE_LEVEL_HIGH>;
};
&timer67 {
interrupt-parent = <&intc>;
interrupts = <0 42 IRQ_TYPE_LEVEL_HIGH>;
};
&aaci {
interrupt-parent = <&intc>;
interrupts = <0 19 IRQ_TYPE_LEVEL_HIGH>;
};
&mmc {
interrupt-parent = <&intc>;
interrupts = <0 17 IRQ_TYPE_LEVEL_HIGH>,
<0 18 IRQ_TYPE_LEVEL_HIGH>;
};
&kmi0 {
interrupt-parent = <&intc>;
interrupts = <0 20 IRQ_TYPE_LEVEL_HIGH>;
};
&kmi1 {
interrupt-parent = <&intc>;
interrupts = <0 21 IRQ_TYPE_LEVEL_HIGH>;
};
&clcd {
interrupt-parent = <&intc>;
interrupts = <0 23 IRQ_TYPE_LEVEL_HIGH>;
};

229
arch/arm/boot/dts/arm-realview-pbx-a9.dts Normal file
View File

@ -0,0 +1,229 @@
/*
* Copyright 2016 Linaro Ltd
*
* Permission is hereby granted, free of charge, to any person obtaining a copy
* of this software and associated documentation files (the "Software"), to deal
* in the Software without restriction, including without limitation the rights
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
* copies of the Software, and to permit persons to whom the Software is
* furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in
* all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
* THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
* THE SOFTWARE.
*/
/dts-v1/;
#include "arm-realview-pbx.dtsi"
/ {
/*
* This is the RealView Platform Baseboard Explore for Cortex-A9
* (HBI0182 + HBI0183) as described in ARM DUI 0440B
*/
model = "ARM RealView Platform Baseboard Explore for Cortex-A9";
arm,hbi = <0x182>;
cpus {
#address-cells = <1>;
#size-cells = <0>;
enable-method = "arm,realview-smp";
cpu-map {
cluster0 {
core0 {
cpu = <&CPU0>;
};
core1 {
cpu = <&CPU1>;
};
};
};
CPU0: cpu@0 {
device_type = "cpu";
compatible = "arm,cortex-a9";
reg = <0x0>;
next-level-cache = <&L2>;
};
CPU1: cpu@1 {
device_type = "cpu";
compatible = "arm,cortex-a9";
reg = <0x1>;
next-level-cache = <&L2>;
};
};
L2: l2-cache {
compatible = "arm,pl310-cache";
reg = <0x1f002000 0x1000>;
cache-unified;
cache-level = <2>;
/*
* Override default cache size, sets and
* associativity as these may be erroneously set
* up by boot loader(s).
*/
cache-size = <1048576>; // 1MB
cache-sets = <4096>;
cache-line-size = <32>;
arm,parity-disable;
arm,tag-latency = <1>;
arm,data-latency = <1 1>;
arm,dirty-latency = <1>;
};
scu: scu@1f000000 {
compatible = "arm,cortex-a9-scu";
reg = <0x1f000000 0x100>;
};
twd_timer: timer@1f000600 {
compatible = "arm,cortex-a9-twd-timer";
reg = <0x1f000600 0x20>;
interrupt-parent = <&intc>;
interrupts = <1 13 0xf04>;
};
twd_wdog: watchdog@1f000620 {
compatible = "arm,cortex-a9-twd-wdt";
reg = <0x1f000620 0x20>;
interrupt-parent = <&intc>;
interrupts = <1 14 0xf04>;
};
pmu: pmu@0 {
compatible = "arm,cortex-a9-pmu";
interrupt-parent = <&intc>;
interrupts = <0 44 IRQ_TYPE_LEVEL_HIGH>,
<0 45 IRQ_TYPE_LEVEL_HIGH>;
interrupt-affinity = <&CPU0>, <&CPU1>;
};
/* Primary GIC PL390 interrupt controller in the test chip */
intc: interrupt-controller@1f000000 {
compatible = "arm,cortex-a9-gic";
#interrupt-cells = <3>;
#address-cells = <1>;
interrupt-controller;
reg = <0x1f001000 0x1000>,
<0x1f000100 0x100>;
};
};
&ethernet {
interrupt-parent = <&intc>;
interrupts = <0 28 IRQ_TYPE_LEVEL_HIGH>;
};
&usb {
interrupt-parent = <&intc>;
interrupts = <0 29 IRQ_TYPE_LEVEL_HIGH>;
};
&serial0 {
interrupt-parent = <&intc>;
interrupts = <0 12 IRQ_TYPE_LEVEL_HIGH>;
};
&serial1 {
interrupt-parent = <&intc>;
interrupts = <0 13 IRQ_TYPE_LEVEL_HIGH>;
};
&serial2 {
interrupt-parent = <&intc>;
interrupts = <0 14 IRQ_TYPE_LEVEL_HIGH>;
};
&serial3 {
interrupt-parent = <&intc>;
interrupts = <0 15 IRQ_TYPE_LEVEL_HIGH>;
};
&ssp {
interrupt-parent = <&intc>;
interrupts = <0 11 IRQ_TYPE_LEVEL_HIGH>;
};
&wdog0 {
interrupt-parent = <&intc>;
interrupts = <0 0 IRQ_TYPE_LEVEL_HIGH>;
};
&wdog1 {
interrupt-parent = <&intc>;
interrupts = <0 40 IRQ_TYPE_LEVEL_HIGH>;
};
&timer01 {
interrupt-parent = <&intc>;
interrupts = <0 4 IRQ_TYPE_LEVEL_HIGH>;
};
&timer23 {
interrupt-parent = <&intc>;
interrupts = <0 5 IRQ_TYPE_LEVEL_HIGH>;
};
&gpio0 {
interrupt-parent = <&intc>;
interrupts = <0 6 IRQ_TYPE_LEVEL_HIGH>;
};
&gpio1 {
interrupt-parent = <&intc>;
interrupts = <0 7 IRQ_TYPE_LEVEL_HIGH>;
};
&gpio2 {
interrupt-parent = <&intc>;
interrupts = <0 8 IRQ_TYPE_LEVEL_HIGH>;
};
&rtc {
interrupt-parent = <&intc>;
interrupts = <0 10 IRQ_TYPE_LEVEL_HIGH>;
};
&timer45 {
interrupt-parent = <&intc>;
interrupts = <0 41 IRQ_TYPE_LEVEL_HIGH>;
};
&timer67 {
interrupt-parent = <&intc>;
interrupts = <0 42 IRQ_TYPE_LEVEL_HIGH>;
};
&aaci {
interrupt-parent = <&intc>;
interrupts = <0 19 IRQ_TYPE_LEVEL_HIGH>;
};
&mmc {
interrupt-parent = <&intc>;
interrupts = <0 17 IRQ_TYPE_LEVEL_HIGH>,
<0 18 IRQ_TYPE_LEVEL_HIGH>;
};
&kmi0 {
interrupt-parent = <&intc>;
interrupts = <0 20 IRQ_TYPE_LEVEL_HIGH>;
};
&kmi1 {
interrupt-parent = <&intc>;
interrupts = <0 21 IRQ_TYPE_LEVEL_HIGH>;
};
&clcd {
interrupt-parent = <&intc>;
interrupts = <0 23 IRQ_TYPE_LEVEL_HIGH>;
};

542
arch/arm/boot/dts/arm-realview-pbx.dtsi Normal file
View File

@ -0,0 +1,542 @@
/*
* Copyright 2016 Linaro Ltd
*
* Permission is hereby granted, free of charge, to any person obtaining a copy
* of this software and associated documentation files (the "Software"), to deal
* in the Software without restriction, including without limitation the rights
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
* copies of the Software, and to permit persons to whom the Software is
* furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in
* all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
* THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
* THE SOFTWARE.
*/
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/gpio/gpio.h>
#include "skeleton.dtsi"
/ {
compatible = "arm,realview-pbx";
chosen { };
aliases {
serial0 = &serial0;
serial1 = &serial1;
serial2 = &serial2;
serial3 = &serial3;
i2c0 = &i2c;
};
memory {
/* 128 MiB memory @ 0x0 */
reg = <0x00000000 0x08000000>;
};
/* The voltage to the MMC card is hardwired at 3.3V */
vmmc: fixedregulator@0 {
compatible = "regulator-fixed";
regulator-name = "vmmc";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-boot-on;
};
veth: fixedregulator@0 {
compatible = "regulator-fixed";
regulator-name = "veth";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-boot-on;
};
xtal24mhz: xtal24mhz@24M {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <24000000>;
};
refclk32khz: refclk32khz {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <32768>;
};
timclk: timclk@1M {
#clock-cells = <0>;
compatible = "fixed-factor-clock";
clock-div = <24>;
clock-mult = <1>;
clocks = <&xtal24mhz>;
};
mclk: mclk@24M {
#clock-cells = <0>;
compatible = "fixed-factor-clock";
clock-div = <1>;
clock-mult = <1>;
clocks = <&xtal24mhz>;
};
kmiclk: kmiclk@24M {
#clock-cells = <0>;
compatible = "fixed-factor-clock";
clock-div = <1>;
clock-mult = <1>;
clocks = <&xtal24mhz>;
};
sspclk: sspclk@24M {
#clock-cells = <0>;
compatible = "fixed-factor-clock";
clock-div = <1>;
clock-mult = <1>;
clocks = <&xtal24mhz>;
};
uartclk: uartclk@24M {
#clock-cells = <0>;
compatible = "fixed-factor-clock";
clock-div = <1>;
clock-mult = <1>;
clocks = <&xtal24mhz>;
};
wdogclk: wdogclk@24M {
#clock-cells = <0>;
compatible = "fixed-factor-clock";
clock-div = <1>;
clock-mult = <1>;
clocks = <&xtal24mhz>;
};
/* FIXME: this actually hangs off the PLL clocks */
pclk: pclk@0 {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <0>;
};
flash0@40000000 {
/* 2 * 32MiB NOR Flash memory */
compatible = "arm,versatile-flash", "cfi-flash";
reg = <0x40000000 0x04000000>;
bank-width = <4>;
};
flash1@44000000 {
/* 2 * 32MiB NOR Flash memory */
compatible = "arm,versatile-flash", "cfi-flash";
reg = <0x44000000 0x04000000>;
bank-width = <4>;
};
/* SMSC 9118 ethernet with PHY and EEPROM */
ethernet: ethernet@4e000000 {
compatible = "smsc,lan9118", "smsc,lan9115";
reg = <0x4e000000 0x10000>;
phy-mode = "mii";
reg-io-width = <4>;
smsc,irq-active-high;
smsc,irq-push-pull;
vdd33a-supply = <&veth>;
vddvario-supply = <&veth>;
};
usb: usb@4f000000 {
compatible = "nxp,usb-isp1761";
reg = <0x4f000000 0x20000>;
port1-otg;
};
soc: soc@0 {
compatible = "arm,realview-pbx-soc", "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
regmap = <&syscon>;
ranges;
syscon: syscon@10000000 {
compatible = "arm,realview-pbx-syscon", "syscon", "simple-mfd";
reg = <0x10000000 0x1000>;
led@08.0 {
compatible = "register-bit-led";
offset = <0x08>;
mask = <0x01>;
label = "versatile:0";
linux,default-trigger = "heartbeat";
default-state = "on";
};
led@08.1 {
compatible = "register-bit-led";
offset = <0x08>;
mask = <0x02>;
label = "versatile:1";
linux,default-trigger = "mmc0";
default-state = "off";
};
led@08.2 {
compatible = "register-bit-led";
offset = <0x08>;
mask = <0x04>;
label = "versatile:2";
linux,default-trigger = "cpu0";
default-state = "off";
};
led@08.3 {
compatible = "register-bit-led";
offset = <0x08>;
mask = <0x08>;
label = "versatile:3";
default-state = "off";
};
led@08.4 {
compatible = "register-bit-led";
offset = <0x08>;
mask = <0x10>;
label = "versatile:4";
default-state = "off";
};
led@08.5 {
compatible = "register-bit-led";
offset = <0x08>;
mask = <0x20>;
label = "versatile:5";
default-state = "off";
};
led@08.6 {
compatible = "register-bit-led";
offset = <0x08>;
mask = <0x40>;
label = "versatile:6";
default-state = "off";
};
led@08.7 {
compatible = "register-bit-led";
offset = <0x08>;
mask = <0x80>;
label = "versatile:7";
default-state = "off";
};
oscclk0: osc0@0c {
compatible = "arm,syscon-icst307";
#clock-cells = <0>;
lock-offset = <0x20>;
vco-offset = <0x0C>;
clocks = <&xtal24mhz>;
};
oscclk1: osc1@10 {
compatible = "arm,syscon-icst307";
#clock-cells = <0>;
lock-offset = <0x20>;
vco-offset = <0x10>;
clocks = <&xtal24mhz>;
};
oscclk2: osc2@14 {
compatible = "arm,syscon-icst307";
#clock-cells = <0>;
lock-offset = <0x20>;
vco-offset = <0x14>;
clocks = <&xtal24mhz>;
};
oscclk3: osc3@18 {
compatible = "arm,syscon-icst307";
#clock-cells = <0>;
lock-offset = <0x20>;
vco-offset = <0x18>;
clocks = <&xtal24mhz>;
};
oscclk4: osc4@1c {
compatible = "arm,syscon-icst307";
#clock-cells = <0>;
lock-offset = <0x20>;
vco-offset = <0x1c>;
clocks = <&xtal24mhz>;
};
};
sp810_syscon0: sysctl@10001000 {
compatible = "arm,sp810", "arm,primecell";
reg = <0x10001000 0x1000>;
clocks = <&refclk32khz>, <&timclk>, <&xtal24mhz>;
clock-names = "refclk", "timclk", "apb_pclk";
#clock-cells = <1>;
clock-output-names = "timerclk0",
"timerclk1",
"timerclk2",
"timerclk3";
assigned-clocks = <&sp810_syscon0 0>,
<&sp810_syscon0 1>,
<&sp810_syscon0 2>,
<&sp810_syscon0 3>;
assigned-clock-parents = <&timclk>,
<&timclk>,
<&timclk>,
<&timclk>;
};
i2c: i2c@10002000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "arm,versatile-i2c";
reg = <0x10002000 0x1000>;
rtc@68 {
compatible = "dallas,ds1338";
reg = <0x68>;
};
};
serial0: serial@10009000 {
compatible = "arm,pl011", "arm,primecell";
reg = <0x10009000 0x1000>;
clocks = <&uartclk>, <&pclk>;
clock-names = "uartclk", "apb_pclk";
};
serial1: serial@1000a000 {
compatible = "arm,pl011", "arm,primecell";
reg = <0x1000a000 0x1000>;
clocks = <&uartclk>, <&pclk>;
clock-names = "uartclk", "apb_pclk";
};
serial2: serial@1000b000 {
compatible = "arm,pl011", "arm,primecell";
reg = <0x1000b000 0x1000>;
clocks = <&uartclk>, <&pclk>;
clock-names = "uartclk", "apb_pclk";
};
ssp: ssp@1000d000 {
compatible = "arm,pl022", "arm,primecell";
reg = <0x1000d000 0x1000>;
clocks = <&sspclk>, <&pclk>;
clock-names = "SSPCLK", "apb_pclk";
};
wdog0: watchdog@1000f000 {
compatible = "arm,sp805", "arm,primecell";
reg = <0x1000f000 0x1000>;
clocks = <&wdogclk>, <&pclk>;
clock-names = "wdogclk", "apb_pclk";
status = "disabled";
};
wdog1: watchdog@10010000 {
compatible = "arm,sp805", "arm,primecell";
reg = <0x10010000 0x1000>;
clocks = <&wdogclk>, <&pclk>;
clock-names = "wdogclk", "apb_pclk";
status = "disabled";
};
timer01: timer@10011000 {
compatible = "arm,sp804", "arm,primecell";
reg = <0x10011000 0x1000>;
clocks = <&sp810_syscon0 0>,
<&sp810_syscon0 1>,
<&pclk>;
clock-names = "timerclk0",
"timerclk1",
"apb_pclk";
};
timer23: timer@10012000 {
compatible = "arm,sp804", "arm,primecell";
reg = <0x10012000 0x1000>;
clocks = <&sp810_syscon0 2>,
<&sp810_syscon0 3>,
<&pclk>;
clock-names = "timerclk2",
"timerclk3",
"apb_pclk";
};
gpio0: gpio@10013000 {
compatible = "arm,pl061", "arm,primecell";
reg = <0x10013000 0x1000>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
clocks = <&pclk>;
clock-names = "apb_pclk";
};
gpio1: gpio@10014000 {
compatible = "arm,pl061", "arm,primecell";
reg = <0x10014000 0x1000>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
clocks = <&pclk>;
clock-names = "apb_pclk";
};
gpio2: gpio@10015000 {
compatible = "arm,pl061", "arm,primecell";
reg = <0x10015000 0x1000>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
clocks = <&pclk>;
clock-names = "apb_pclk";
};
/* DVI serial bus control is at 10016000 */
rtc: rtc@10017000 {
compatible = "arm,pl031", "arm,primecell";
reg = <0x10017000 0x1000>;
clocks = <&pclk>;
clock-names = "apb_pclk";
};
timer45: timer@10018000 {
compatible = "arm,sp804", "arm,primecell";
reg = <0x10018000 0x1000>;
clocks = <&timclk>, <&timclk>, <&pclk>;
clock-names = "timerclk4", "timerclk5", "apb_pclk";
};
timer67: timer@10019000 {
compatible = "arm,sp804", "arm,primecell";
reg = <0x10019000 0x1000>;
clocks = <&timclk>, <&timclk>, <&pclk>;
clock-names = "timerclk6", "timerclk7", "apb_pclk";
};
sp810_syscon1: sysctl@1001a000 {
compatible = "arm,sp810", "arm,primecell";
reg = <0x1001a000 0x1000>;
clocks = <&refclk32khz>, <&timclk>, <&xtal24mhz>;
clock-names = "refclk", "timclk", "apb_pclk";
#clock-cells = <1>;
clock-output-names = "timerclk4",
"timerclk5",
"timerclk6",
"timerclk7";
assigned-clocks = <&sp810_syscon1 0>,
<&sp810_syscon1 1>,
<&sp810_syscon1 2>,
<&sp810_syscon1 3>;
assigned-clock-parents = <&timclk>,
<&timclk>,
<&timclk>,
<&timclk>;
};
};
/* These peripherals are inside the FPGA */
fpga {
#address-cells = <1>;
#size-cells = <1>;
compatible = "simple-bus";
ranges;
aaci: aaci@10004000 {
compatible = "arm,pl041", "arm,primecell";
reg = <0x10004000 0x1000>;
clocks = <&pclk>;
clock-names = "apb_pclk";
};
mmc: mmcsd@10005000 {
compatible = "arm,pl18x", "arm,primecell";
reg = <0x10005000 0x1000>;
/* Due to frequent FIFO overruns, use just 500 kHz */
max-frequency = <500000>;
bus-width = <4>;
cap-sd-highspeed;
cap-mmc-highspeed;
clocks = <&mclk>, <&pclk>;
clock-names = "mclk", "apb_pclk";
vmmc-supply = <&vmmc>;
cd-gpios = <&gpio2 0 GPIO_ACTIVE_LOW>;
wp-gpios = <&gpio2 1 GPIO_ACTIVE_HIGH>;
};
kmi0: kmi@10006000 {
compatible = "arm,pl050", "arm,primecell";
reg = <0x10006000 0x1000>;
clocks = <&kmiclk>, <&pclk>;
clock-names = "KMIREFCLK", "apb_pclk";
};
kmi1: kmi@10007000 {
compatible = "arm,pl050", "arm,primecell";
reg = <0x10007000 0x1000>;
clocks = <&kmiclk>, <&pclk>;
clock-names = "KMIREFCLK", "apb_pclk";
};
serial3: serial@1000c000 {
compatible = "arm,pl011", "arm,primecell";
reg = <0x1000c000 0x1000>;
clocks = <&uartclk>, <&pclk>;
clock-names = "uartclk", "apb_pclk";
};
};
/* These peripherals are inside the NEC ISSP */
issp {
#address-cells = <1>;
#size-cells = <1>;
compatible = "simple-bus";
ranges;
clcd: clcd@10020000 {
compatible = "arm,pl111", "arm,primecell";
reg = <0x10020000 0x1000>;
interrupt-names = "combined";
clocks = <&oscclk4>, <&pclk>;
clock-names = "clcdclk", "apb_pclk";
port {
clcd_pads: endpoint {
remote-endpoint = <&clcd_panel>;
arm,pl11x,tft-r0g0b0-pads = <0 8 16>;
};
};
panel {
compatible = "panel-dpi";
port {
clcd_panel: endpoint {
remote-endpoint = <&clcd_pads>;
};
};
/* Standard 640x480 VGA timings */
panel-timing {
clock-frequency = <25175000>;
hactive = <640>;
hback-porch = <48>;
hfront-porch = <16>;
hsync-len = <96>;
vactive = <480>;
vback-porch = <33>;
vfront-porch = <10>;
vsync-len = <2>;
};
};
};
};
};

6
arch/arm/boot/dts/armada-385-linksys.dtsi
View File

@ -245,7 +245,7 @@
button@2 {
label = "Factory Reset Button";
linux,code = <KEY_RESTART>;
gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
gpios = <&gpio0 29 GPIO_ACTIVE_LOW>;
};
};
@ -260,7 +260,7 @@
};
sata {
gpios = <&gpio1 22 GPIO_ACTIVE_HIGH>;
gpios = <&gpio1 22 GPIO_ACTIVE_LOW>;
default-state = "off";
};
};
@ -313,7 +313,7 @@
&pinctrl {
keys_pin: keys-pin {
marvell,pins = "mpp24", "mpp47";
marvell,pins = "mpp24", "mpp29";
marvell,function = "gpio";
};

4
arch/arm/boot/dts/armada-xp-linksys-mamba.dts
View File

@ -304,13 +304,13 @@
button@1 {
label = "WPS";
linux,code = <KEY_WPS_BUTTON>;
gpios = <&gpio1 0 GPIO_ACTIVE_HIGH>;
gpios = <&gpio1 0 GPIO_ACTIVE_LOW>;
};
button@2 {
label = "Factory Reset Button";
linux,code = <KEY_RESTART>;
gpios = <&gpio1 1 GPIO_ACTIVE_HIGH>;
gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
};
};

2
arch/arm/boot/dts/armv7-m.dtsi
View File

@ -1,7 +1,7 @@
#include "skeleton.dtsi"
/ {
nvic: nv-interrupt-controller {
nvic: interrupt-controller@e000e100 {
compatible = "arm,armv7m-nvic";
interrupt-controller;
#interrupt-cells = <1>;

103
arch/arm/boot/dts/artpec6.dtsi
View File

@ -91,96 +91,32 @@
clock-frequency = <50000000>;
};
/* PLL1 is used by CPU and some peripherals */
pll1_clk: pll1_clk@f8000000 {
eth_phy_ref_clk: eth_phy_ref_clk {
#clock-cells = <0>;
compatible = "axis,artpec6-pll1-clock";
reg = <0xf8000000 4>;
compatible = "fixed-clock";
clock-frequency = <125000000>;
};
clkctrl: clkctrl@0xf8000000 {
#clock-cells = <1>;
compatible = "axis,artpec6-clkctrl";
reg = <0xf8000000 0x48>;
clocks = <&ext_clk>;
clock-names = "sys_refclk";
};
cpu_clk: cpu_clk {
#clock-cells = <0>;
compatible = "fixed-factor-clock";
clock-div = <1>;
clock-mult = <1>;
clocks = <&pll1_clk>;
clock-output-names = "cpu_clk";
};
cpu_clkdiv2: cpu_clkdiv2 {
#clock-cells = <0>;
compatible = "fixed-factor-clock";
clock-div = <2>;
clock-mult = <1>;
clocks = <&cpu_clk>;
};
cpu_clkdiv4: cpu_clkdiv4 {
#clock-cells = <0>;
compatible = "fixed-factor-clock";
clock-div = <4>;
clock-mult = <1>;
clocks = <&cpu_clk>;
};
apb_pclk: apb_pclk {
#clock-cells = <0>;
compatible = "fixed-factor-clock";
clock-div = <8>;
clock-mult = <1>;
clocks = <&cpu_clk>;
clock-output-names = "apb_pclk";
};
/* PLL2 is used by a number of peripherals, including UDL */
pll2: pll2 {
#clock-cells = <0>;
compatible = "fixed-factor-clock";
clock-div = <1>;
clock-mult = <24>;
clocks = <&ext_clk>;
};
/* PLL2DIV2 is used by the Fractional Clock Divider, for i2s */
pll2div2: pll2div2 {
#clock-cells = <0>;
compatible = "fixed-factor-clock";
clock-div = <2>;
clock-mult = <1>;
clocks = <&pll2>;
};
pll2div12: pll2div12 {
#clock-cells = <0>;
compatible = "fixed-factor-clock";
clock-div = <12>;
clock-mult = <1>;
clocks = <&pll2>;
};
pll2div24: pll2div24 {
#clock-cells = <0>;
compatible = "fixed-factor-clock";
clock-div = <24>;
clock-mult = <1>;
clocks = <&pll2>;
clock-output-names = "uart_clk";
};
gtimer@faf00200 {
compatible = "arm,cortex-a9-global-timer";
reg = <0xfaf00200 0x20>;
interrupts = <GIC_PPI 11 0xf01>;
clocks = <&cpu_clkdiv2>;
clocks = <&clkctrl 1>;
};
timer@faf00600 {
compatible = "arm,cortex-a9-twd-timer";
reg = <0xfaf00600 0x20>;
interrupts = <GIC_PPI 13 0xf04>;
clocks = <&cpu_clkdiv2>;
clocks = <&clkctrl 1>;
status = "disabled";
};
@ -220,7 +156,8 @@
ethernet: ethernet@f8010000 {
clock-names = "phy_ref_clk", "apb_pclk";
clocks = <&ext_clk>, <&apb_pclk>;
clocks = <&eth_phy_ref_clk>,
<&clkctrl 4>;
compatible = "snps,dwc-qos-ethernet-4.10";
interrupt-parent = <&intc>;
interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
@ -238,7 +175,8 @@
compatible = "arm,pl011", "arm,primecell";
reg = <0xf8036000 0x1000>;
interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&pll2div24>, <&apb_pclk>;
clocks = <&clkctrl 13>,
<&clkctrl 12>;
clock-names = "uart_clk", "apb_pclk";
status = "disabled";
};
@ -246,7 +184,8 @@
compatible = "arm,pl011", "arm,primecell";
reg = <0xf8037000 0x1000>;
interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&pll2div24>, <&apb_pclk>;
clocks = <&clkctrl 13>,
<&clkctrl 12>;
clock-names = "uart_clk", "apb_pclk";
status = "disabled";
};
@ -254,7 +193,8 @@
compatible = "arm,pl011", "arm,primecell";
reg = <0xf8038000 0x1000>;
interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&pll2div24>, <&apb_pclk>;
clocks = <&clkctrl 13>,
<&clkctrl 12>;
clock-names = "uart_clk", "apb_pclk";
status = "disabled";
};
@ -262,7 +202,8 @@
compatible = "arm,pl011", "arm,primecell";
reg = <0xf8039000 0x1000>;
interrupts = <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&pll2div24>, <&apb_pclk>;
clocks = <&clkctrl 13>,
<&clkctrl 12>;
clock-names = "uart_clk", "apb_pclk";
status = "disabled";
};

25
arch/arm/boot/dts/aspeed-ast2500-evb.dts Normal file
View File

@ -0,0 +1,25 @@
/dts-v1/;
#include "aspeed-g5.dtsi"
/ {
model = "AST2500 EVB";
compatible = "aspeed,ast2500";
aliases {
serial4 = &uart5;
};
chosen {
stdout-path = &uart5;
bootargs = "console=ttyS4,115200 earlyprintk";
};
memory {
reg = <0x80000000 0x20000000>;
};
};
&uart5 {
status = "okay";
};

25
arch/arm/boot/dts/aspeed-bmc-opp-palmetto.dts Normal file
View File

@ -0,0 +1,25 @@
/dts-v1/;
#include "aspeed-g4.dtsi"
/ {
model = "Palmetto BMC";
compatible = "tyan,palmetto-bmc", "aspeed,ast2400";
aliases {
serial4 = &uart5;
};
chosen {
stdout-path = &uart5;
bootargs = "console=ttyS4,38400 earlyprintk";
};
memory {
reg = <0x40000000 0x10000000>;
};
};
&uart5 {
status = "okay";
};

161
arch/arm/boot/dts/aspeed-g4.dtsi Normal file
View File

@ -0,0 +1,161 @@
#include "skeleton.dtsi"
/ {
model = "Aspeed BMC";
compatible = "aspeed,ast2400";
#address-cells = <1>;
#size-cells = <1>;
interrupt-parent = <&vic>;
cpus {
#address-cells = <1>;
#size-cells = <0>;
cpu@0 {
compatible = "arm,arm926ej-s";
device_type = "cpu";
reg = <0>;
};
};
clocks {
clk_clkin: clk_clkin {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <48000000>;
};
};
ahb {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges;
vic: interrupt-controller@1e6c0080 {
compatible = "aspeed,ast2400-vic";
interrupt-controller;
#interrupt-cells = <1>;
valid-sources = <0xffffffff 0x0007ffff>;
reg = <0x1e6c0080 0x80>;
};
apb {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges;
clk_hpll: clk_hpll@1e6e2070 {
#clock-cells = <0>;
compatible = "aspeed,g4-hpll-clock";
reg = <0x1e6e2070 0x4>;
clocks = <&clk_clkin>;
};
clk_apb: clk_apb@1e6e2008 {
#clock-cells = <0>;
compatible = "aspeed,g4-apb-clock";
reg = <0x1e6e2008 0x4>;
clocks = <&clk_hpll>;
};
clk_uart: clk_uart@1e6e2008 {
#clock-cells = <0>;
compatible = "aspeed,uart-clock";
reg = <0x1e6e202c 0x4>;
};
sram@1e720000 {
compatible = "mmio-sram";
reg = <0x1e720000 0x8000>; // 32K
};
timer: timer@1e782000 {
compatible = "aspeed,ast2400-timer";
reg = <0x1e782000 0x90>;
// The moxart_timer driver registers only one
// interrupt and assumes it's for timer 1
//interrupts = <16 17 18 35 36 37 38 39>;
interrupts = <16>;
clocks = <&clk_apb>;
};
wdt1: wdt@1e785000 {
compatible = "aspeed,wdt";
reg = <0x1e785000 0x1c>;
interrupts = <27>;
};
wdt2: wdt@1e785020 {
compatible = "aspeed,wdt";
reg = <0x1e785020 0x1c>;
interrupts = <27>;
clocks = <&clk_apb>;
status = "disabled";
};
uart1: serial@1e783000 {
compatible = "ns16550a";
reg = <0x1e783000 0x1000>;
reg-shift = <2>;
interrupts = <9>;
clocks = <&clk_uart>;
no-loopback-test;
status = "disabled";
};
uart2: serial@1e78d000 {
compatible = "ns16550a";
reg = <0x1e78d000 0x1000>;
reg-shift = <2>;
interrupts = <32>;
clocks = <&clk_uart>;
no-loopback-test;
status = "disabled";
};
uart3: serial@1e78e000 {
compatible = "ns16550a";
reg = <0x1e78e000 0x1000>;
reg-shift = <2>;
interrupts = <33>;
clocks = <&clk_uart>;
no-loopback-test;
status = "disabled";
};
uart4: serial@1e78f000 {
compatible = "ns16550a";
reg = <0x1e78f000 0x1000>;
reg-shift = <2>;
interrupts = <34>;
clocks = <&clk_uart>;
no-loopback-test;
status = "disabled";
};
uart5: serial@1e784000 {
compatible = "ns16550a";
reg = <0x1e784000 0x1000>;
reg-shift = <2>;
interrupts = <10>;
clocks = <&clk_uart>;
current-speed = <38400>;
no-loopback-test;
status = "disabled";
};
uart6: serial@1e787000 {
compatible = "ns16550a";
reg = <0x1e787000 0x1000>;
reg-shift = <2>;
interrupts = <10>;
clocks = <&clk_uart>;
no-loopback-test;
status = "disabled";
};
};
};
};

170
arch/arm/boot/dts/aspeed-g5.dtsi Normal file
View File

@ -0,0 +1,170 @@
#include "skeleton.dtsi"
/ {
model = "Aspeed BMC";
compatible = "aspeed,ast2500";
#address-cells = <1>;
#size-cells = <1>;
interrupt-parent = <&vic>;
cpus {
#address-cells = <1>;
#size-cells = <0>;
cpu@0 {
compatible = "arm,arm1176jzf-s";
device_type = "cpu";
reg = <0>;
};
};
ahb {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges;
vic: interrupt-controller@1e6c0080 {
compatible = "aspeed,ast2400-vic";
interrupt-controller;
#interrupt-cells = <1>;
valid-sources = <0xfefff7ff 0x0807ffff>;
reg = <0x1e6c0080 0x80>;
};
apb {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges;
clk_clkin: clk_clkin@1e6e2070 {
#clock-cells = <0>;
compatible = "aspeed,g5-clkin-clock";
reg = <0x1e6e2070 0x04>;
};
clk_hpll: clk_hpll@1e6e2024 {
#clock-cells = <0>;
compatible = "aspeed,g5-hpll-clock";
reg = <0x1e6e2024 0x4>;
clocks = <&clk_clkin>;
};
clk_ahb: clk_ahb@1e6e2070 {
#clock-cells = <0>;
compatible = "aspeed,g5-ahb-clock";
reg = <0x1e6e2070 0x4>;
clocks = <&clk_hpll>;
};
clk_apb: clk_apb@1e6e2008 {
#clock-cells = <0>;
compatible = "aspeed,g5-apb-clock";
reg = <0x1e6e2008 0x4>;
clocks = <&clk_hpll>;
};
clk_uart: clk_uart@1e6e2008 {
#clock-cells = <0>;
compatible = "aspeed,uart-clock";
reg = <0x1e6e202c 0x4>;
};
sram@1e720000 {
compatible = "mmio-sram";
reg = <0x1e720000 0x9000>; // 36K
};
timer: timer@1e782000 {
compatible = "aspeed,ast2400-timer";
reg = <0x1e782000 0x90>;
// The moxart_timer driver registers only one
// interrupt and assumes it's for timer 1
//interrupts = <16 17 18 35 36 37 38 39>;
interrupts = <16>;
clocks = <&clk_apb>;
};
wdt1: wdt@1e785000 {
compatible = "aspeed,wdt";
reg = <0x1e785000 0x1c>;
interrupts = <27>;
};
wdt2: wdt@1e785020 {
compatible = "aspeed,wdt";
reg = <0x1e785020 0x1c>;
interrupts = <27>;
status = "disabled";
};
wdt3: wdt@1e785040 {
compatible = "aspeed,wdt";
reg = <0x1e785074 0x1c>;
status = "disabled";
};
uart1: serial@1e783000 {
compatible = "ns16550a";
reg = <0x1e783000 0x1000>;
reg-shift = <2>;
interrupts = <9>;
clocks = <&clk_uart>;
no-loopback-test;
status = "disabled";
};
uart2: serial@1e78d000 {
compatible = "ns16550a";
reg = <0x1e78d000 0x1000>;
reg-shift = <2>;
interrupts = <32>;
clocks = <&clk_uart>;
no-loopback-test;
status = "disabled";
};
uart3: serial@1e78e000 {
compatible = "ns16550a";
reg = <0x1e78e000 0x1000>;
reg-shift = <2>;
interrupts = <33>;
clocks = <&clk_uart>;
no-loopback-test;
status = "disabled";
};
uart4: serial@1e78f000 {
compatible = "ns16550a";
reg = <0x1e78f000 0x1000>;
reg-shift = <2>;
interrupts = <34>;
clocks = <&clk_uart>;
no-loopback-test;
status = "disabled";
};
uart5: serial@1e784000 {
compatible = "ns16550a";
reg = <0x1e784000 0x1000>;
reg-shift = <2>;
interrupts = <10>;
clocks = <&clk_uart>;
current-speed = <38400>;
no-loopback-test;
status = "disabled";
};
uart6: serial@1e787000 {
compatible = "ns16550a";
reg = <0x1e787000 0x1000>;
reg-shift = <2>;
interrupts = <10>;
clocks = <&clk_uart>;
no-loopback-test;
status = "disabled";
};
};
};
};

9
arch/arm/boot/dts/at91-sama5d2_xplained.dts
View File

@ -234,6 +234,15 @@
};
};
shdwc@f8048010 {
atmel,shdwc-debouncer = <976>;
input@0 {
reg = <0>;
atmel,wakeup-type = "low";
};
};
watchdog@f8048040 {
status = "okay";
};

4
arch/arm/boot/dts/at91-vinco.dts
View File

@ -118,7 +118,7 @@
ethernet-phy@1 {
reg = <0x1>;
reset-gpios = <&pioE 8 GPIO_ACTIVE_HIGH>;
reset-gpios = <&pioE 8 GPIO_ACTIVE_LOW>;
interrupt-parent = <&pioB>;
interrupts = <15 IRQ_TYPE_EDGE_FALLING>;
};
@ -162,7 +162,7 @@
reg = <0x1>;
interrupt-parent = <&pioB>;
interrupts = <31 IRQ_TYPE_EDGE_FALLING>;
reset-gpios = <&pioE 6 GPIO_ACTIVE_HIGH>;
reset-gpios = <&pioE 6 GPIO_ACTIVE_LOW>;
};
};

2
arch/arm/boot/dts/at91sam9g45.dtsi
View File

@ -978,7 +978,7 @@
trng@fffcc000 {
compatible = "atmel,at91sam9g45-trng";
reg = <0xfffcc000 0x4000>;
reg = <0xfffcc000 0x100>;
interrupts = <6 IRQ_TYPE_LEVEL_HIGH 0>;
clocks = <&trng_clk>;
};

4
arch/arm/boot/dts/bcm2835-rpi-a-plus.dts
View File

@ -29,3 +29,7 @@
brcm,function = <BCM2835_FSEL_ALT0>;
};
};
&hdmi {
hpd-gpios = <&gpio 46 GPIO_ACTIVE_LOW>;
};

4
arch/arm/boot/dts/bcm2835-rpi-a.dts
View File

@ -22,3 +22,7 @@
brcm,function = <BCM2835_FSEL_ALT2>;
};
};
&hdmi {
hpd-gpios = <&gpio 46 GPIO_ACTIVE_HIGH>;
};

4
arch/arm/boot/dts/bcm2835-rpi-b-plus.dts
View File

@ -29,3 +29,7 @@
brcm,function = <BCM2835_FSEL_ALT0>;
};
};
&hdmi {
hpd-gpios = <&gpio 46 GPIO_ACTIVE_LOW>;
};

4
arch/arm/boot/dts/bcm2835-rpi-b-rev2.dts
View File

@ -22,3 +22,7 @@
brcm,function = <BCM2835_FSEL_ALT2>;
};
};
&hdmi {
hpd-gpios = <&gpio 46 GPIO_ACTIVE_LOW>;
};

4
arch/arm/boot/dts/bcm2835-rpi-b.dts
View File

@ -16,3 +16,7 @@
&gpio {
pinctrl-0 = <&gpioout &alt0 &alt3>;
};
&hdmi {
hpd-gpios = <&gpio 46 GPIO_ACTIVE_HIGH>;
};

9
arch/arm/boot/dts/bcm2835-rpi.dtsi
View File

@ -74,3 +74,12 @@
&usb {
power-domains = <&power RPI_POWER_DOMAIN_USB>;
};
&v3d {
power-domains = <&power RPI_POWER_DOMAIN_V3D>;
};
&hdmi {
power-domains = <&power RPI_POWER_DOMAIN_HDMI>;
status = "okay";
};

11
arch/arm/boot/dts/bcm2835.dtsi
View File

@ -3,6 +3,17 @@
/ {
compatible = "brcm,bcm2835";
cpus {
#address-cells = <1>;
#size-cells = <0>;
cpu@0 {
device_type = "cpu";
compatible = "arm,arm1176jzf-s";
reg = <0x0>;
};
};
soc {
ranges = <0x7e000000 0x20000000 0x02000000>;
dma-ranges = <0x40000000 0x00000000 0x20000000>;

4
arch/arm/boot/dts/bcm2836-rpi-2-b.dts
View File

@ -33,3 +33,7 @@
brcm,function = <BCM2835_FSEL_ALT0>;
};
};
&hdmi {
hpd-gpios = <&gpio 46 GPIO_ACTIVE_LOW>;
};

47
arch/arm/boot/dts/bcm283x.dtsi
View File

@ -1,6 +1,7 @@
#include <dt-bindings/pinctrl/bcm2835.h>
#include <dt-bindings/clock/bcm2835.h>
#include <dt-bindings/clock/bcm2835-aux.h>
#include <dt-bindings/gpio/gpio.h>
#include "skeleton.dtsi"
/* This include file covers the common peripherals and configuration between
@ -153,6 +154,18 @@
status = "disabled";
};
pixelvalve@7e206000 {
compatible = "brcm,bcm2835-pixelvalve0";
reg = <0x7e206000 0x100>;
interrupts = <2 13>; /* pwa0 */
};
pixelvalve@7e207000 {
compatible = "brcm,bcm2835-pixelvalve1";
reg = <0x7e207000 0x100>;
interrupts = <2 14>; /* pwa1 */
};
aux: aux@0x7e215000 {
compatible = "brcm,bcm2835-aux";
#clock-cells = <1>;
@ -206,6 +219,12 @@
status = "disabled";
};
hvs@7e400000 {
compatible = "brcm,bcm2835-hvs";
reg = <0x7e400000 0x6000>;
interrupts = <2 1>;
};
i2c1: i2c@7e804000 {
compatible = "brcm,bcm2835-i2c";
reg = <0x7e804000 0x1000>;
@ -226,11 +245,39 @@
status = "disabled";
};
pixelvalve@7e807000 {
compatible = "brcm,bcm2835-pixelvalve2";
reg = <0x7e807000 0x100>;
interrupts = <2 10>; /* pixelvalve */
};
hdmi: hdmi@7e902000 {
compatible = "brcm,bcm2835-hdmi";
reg = <0x7e902000 0x600>,
<0x7e808000 0x100>;
interrupts = <2 8>, <2 9>;
ddc = <&i2c2>;
clocks = <&clocks BCM2835_PLLH_PIX>,
<&clocks BCM2835_CLOCK_HSM>;
clock-names = "pixel", "hdmi";
status = "disabled";
};
usb: usb@7e980000 {
compatible = "brcm,bcm2835-usb";
reg = <0x7e980000 0x10000>;
interrupts = <1 9>;
};
v3d: v3d@7ec00000 {
compatible = "brcm,bcm2835-v3d";
reg = <0x7ec00000 0x1000>;
interrupts = <1 10>;
};
vc4: gpu {
compatible = "brcm,bcm2835-vc4";
};
};
clocks {

10
arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts
View File

@ -17,7 +17,7 @@
model = "Buffalo WZR-1750DHP (BCM4708)";
chosen {
bootargs = "console=ttyS0,115200";
bootargs = "console=ttyS0,115200 earlycon";
};
memory {
@ -139,3 +139,11 @@
&uart0 {
status = "okay";
};
&usb2 {
vcc-gpio = <&chipcommon 9 GPIO_ACTIVE_HIGH>;
};
&usb3 {
vcc-gpio = <&chipcommon 10 GPIO_ACTIVE_LOW>;
};

6
arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts
View File

@ -17,7 +17,7 @@
model = "Luxul XWC-1000 (BCM4708)";
chosen {
bootargs = "console=ttyS0,115200";
bootargs = "console=ttyS0,115200 earlycon";
};
memory {
@ -59,3 +59,7 @@
&uart0 {
status = "okay";
};
&spi_nor {
status = "okay";
};

17
arch/arm/boot/dts/bcm4708-netgear-r6250.dts
View File

@ -17,24 +17,13 @@
model = "Netgear R6250 V1 (BCM4708)";
chosen {
bootargs = "console=ttyS0,115200";
bootargs = "console=ttyS0,115200 earlycon";
};
memory {
reg = <0x00000000 0x08000000>;
};
axi@18000000 {
usb3@23000 {
reg = <0x00023000 0x1000>;
#address-cells = <1>;
#size-cells = <1>;
vcc-gpio = <&chipcommon 0 GPIO_ACTIVE_HIGH>;
};
};
leds {
compatible = "gpio-leds";
@ -97,3 +86,7 @@
&uart0 {
status = "okay";
};
&usb3 {
vcc-gpio = <&chipcommon 0 GPIO_ACTIVE_HIGH>;
};

6
arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts
View File

@ -17,7 +17,7 @@
model = "SmartRG SR400ac";
chosen {
bootargs = "console=ttyS0,115200";
bootargs = "console=ttyS0,115200 earlycon";
};
memory {
@ -122,3 +122,7 @@
&uart0 {
status = "okay";
};
&spi_nor {
status = "okay";
};

2
arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts
View File

@ -17,7 +17,7 @@
model = "Buffalo WZR-600DHP2 (BCM47081)";
chosen {
bootargs = "console=ttyS0,115200";
bootargs = "console=ttyS0,115200 earlycon";
};
memory {

5
arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts
View File

@ -126,3 +126,8 @@
};
};
};
&usb2 {
vcc-gpio = <&chipcommon 13 GPIO_ACTIVE_HIGH>;
};

8
arch/arm/boot/dts/bcm4709-netgear-r8000.dts
View File

@ -106,3 +106,11 @@
};
};
};
&usb2 {
vcc-gpio = <&chipcommon 0 GPIO_ACTIVE_HIGH>;
};
&usb3 {
vcc-gpio = <&chipcommon 0 GPIO_ACTIVE_HIGH>;
};

6
arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts
View File

@ -17,7 +17,7 @@
model = "D-Link DIR-885L";
chosen {
bootargs = "console=ttyS0,115200";
bootargs = "console=ttyS0,115200 earlycon";
};
memory {
@ -109,3 +109,7 @@
status = "okay";
clock-frequency = <125000000>;
};
&usb3 {
vcc-gpio = <&chipcommon 18 GPIO_ACTIVE_HIGH>;
};

32
arch/arm/boot/dts/bcm5301x.dtsi
View File

@ -18,6 +18,10 @@
/ {
interrupt-parent = <&gic>;
chosen {
stdout-path = &uart0;
};
chipcommonA {
compatible = "simple-bus";
ranges = <0x00000000 0x18000000 0x00001000>;
@ -207,6 +211,34 @@
gpio-controller;
#gpio-cells = <2>;
};
usb2: usb2@21000 {
reg = <0x00021000 0x1000>;
#address-cells = <1>;
#size-cells = <1>;
};
usb3: usb3@23000 {
reg = <0x00023000 0x1000>;
#address-cells = <1>;
#size-cells = <1>;
};
spi@29000 {
reg = <0x00029000 0x1000>;
#address-cells = <1>;
#size-cells = <0>;
spi_nor: spi-nor@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <20000000>;
linux,part-probe = "ofpart", "bcm47xxpart";
status = "disabled";
};
};
};
lcpll0: lcpll0@1800c100 {

8
arch/arm/boot/dts/cros-adc-thermistors.dtsi
View File

@ -13,28 +13,28 @@
*/
&adc {
ncp15wb473@3 {
thermistor3 {
compatible = "murata,ncp15wb473";
pullup-uv = <1800000>;
pullup-ohm = <47000>;
pulldown-ohm = <0>;
io-channels = <&adc 3>;
};
ncp15wb473@4 {
thermistor4 {
compatible = "murata,ncp15wb473";
pullup-uv = <1800000>;
pullup-ohm = <47000>;
pulldown-ohm = <0>;
io-channels = <&adc 4>;
};
ncp15wb473@5 {
thermistor5 {
compatible = "murata,ncp15wb473";
pullup-uv = <1800000>;
pullup-ohm = <47000>;
pulldown-ohm = <0>;
io-channels = <&adc 5>;
};
ncp15wb473@6 {
thermistor6 {
compatible = "murata,ncp15wb473";
pullup-uv = <1800000>;
pullup-ohm = <47000>;

14
arch/arm/boot/dts/da850-enbw-cmc.dts
View File

@ -16,14 +16,20 @@
compatible = "enbw,cmc", "ti,da850";
model = "EnBW CMC";
soc {
serial0: serial@1c42000 {
soc@1c00000 {
serial0: serial@42000 {
status = "okay";
};
serial1: serial@1d0c000 {
serial1: serial@10c000 {
status = "okay";
};
serial2: serial@1d0d000 {
serial2: serial@10d000 {
status = "okay";
};
mdio: mdio@224000 {
status = "okay";
};
eth0: ethernet@220000 {
status = "okay";
};
};

26
arch/arm/boot/dts/da850-evm.dts
View File

@ -14,8 +14,8 @@
compatible = "ti,da850-evm", "ti,da850";
model = "DA850/AM1808/OMAP-L138 EVM";
soc {
pmx_core: pinmux@1c14120 {
soc@1c00000 {
pmx_core: pinmux@14120 {
status = "okay";
mcasp0_pins: pinmux_mcasp0_pins {
@ -30,19 +30,19 @@
>;
};
};
serial0: serial@1c42000 {
serial0: serial@42000 {
status = "okay";
};
serial1: serial@1d0c000 {
serial1: serial@10c000 {
status = "okay";
};
serial2: serial@1d0d000 {
serial2: serial@10d000 {
status = "okay";
};
rtc0: rtc@1c23000 {
rtc0: rtc@23000 {
status = "okay";
};
i2c0: i2c@1c22000 {
i2c0: i2c@22000 {
status = "okay";
clock-frequency = <100000>;
pinctrl-names = "default";
@ -66,17 +66,17 @@
};
};
wdt: wdt@1c21000 {
wdt: wdt@21000 {
status = "okay";
};
mmc0: mmc@1c40000 {
mmc0: mmc@40000 {
max-frequency = <50000000>;
bus-width = <4>;
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&mmc0_pins>;
};
spi1: spi@1f0e000 {
spi1: spi@30e000 {
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&spi1_pins &spi1_cs0_pin>;
@ -116,18 +116,18 @@
};
};
};
mdio: mdio@1e24000 {
mdio: mdio@224000 {
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&mdio_pins>;
bus_freq = <2200000>;
};
eth0: ethernet@1e20000 {
eth0: ethernet@220000 {
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&mii_pins>;
};
gpio: gpio@1e26000 {
gpio: gpio@226000 {
status = "okay";
};
};

95
arch/arm/boot/dts/da850.dtsi
View File

@ -15,15 +15,15 @@
#address-cells = <1>;
#size-cells = <1>;
ranges;
intc: interrupt-controller {
intc: interrupt-controller@fffee000 {
compatible = "ti,cp-intc";
interrupt-controller;
#interrupt-cells = <1>;
ti,intc-size = <100>;
ti,intc-size = <101>;
reg = <0xfffee000 0x2000>;
};
};
soc {
soc@1c00000 {
compatible = "simple-bus";
model = "da850";
#address-cells = <1>;
@ -31,7 +31,7 @@
ranges = <0x0 0x01c00000 0x400000>;
interrupt-parent = <&intc>;
pmx_core: pinmux@1c14120 {
pmx_core: pinmux@14120 {
compatible = "pinctrl-single";
reg = <0x14120 0x50>;
#address-cells = <1>;
@ -63,6 +63,12 @@
0x10 0x00002200 0x0000ff00
>;
};
i2c1_pins: pinmux_i2c1_pins {
pinctrl-single,bits = <
/* I2C1_SDA, I2C1_SCL */
0x10 0x00440000 0x00ff0000
>;
};
mmc0_pins: pinmux_mmc_pins {
pinctrl-single,bits = <
/* MMCSD0_DAT[3] MMCSD0_DAT[2]
@ -114,7 +120,19 @@
0x4 0x00000004 0x0000000f
>;
};
spi1_pins: pinmux_spi_pins {
spi0_pins: pinmux_spi0_pins {
pinctrl-single,bits = <
/* SIMO, SOMI, CLK */
0xc 0x00001101 0x0000ff0f
>;
};
spi0_cs0_pin: pinmux_spi0_cs0 {
pinctrl-single,bits = <
/* CS0 */
0x10 0x00000010 0x000000f0
>;
};
spi1_pins: pinmux_spi1_pins {
pinctrl-single,bits = <
/* SIMO, SOMI, CLK */
0x14 0x00110100 0x00ff0f00
@ -150,7 +168,7 @@
};
};
edma0: edma@01c00000 {
edma0: edma@0 {
compatible = "ti,edma3-tpcc";
/* eDMA3 CC0: 0x01c0 0000 - 0x01c0 7fff */
reg = <0x0 0x8000>;
@ -161,19 +179,19 @@
ti,tptcs = <&edma0_tptc0 7>, <&edma0_tptc1 0>;
};
edma0_tptc0: tptc@01c08000 {
edma0_tptc0: tptc@8000 {
compatible = "ti,edma3-tptc";
reg = <0x8000 0x400>;
interrupts = <13>;
interrupt-names = "edm3_tcerrint";
};
edma0_tptc1: tptc@01c08400 {
edma0_tptc1: tptc@8400 {
compatible = "ti,edma3-tptc";
reg = <0x8400 0x400>;
interrupts = <32>;
interrupt-names = "edm3_tcerrint";
};
edma1: edma@01e30000 {
edma1: edma@230000 {
compatible = "ti,edma3-tpcc";
/* eDMA3 CC1: 0x01e3 0000 - 0x01e3 7fff */
reg = <0x230000 0x8000>;
@ -184,41 +202,41 @@
ti,tptcs = <&edma1_tptc0 7>;
};
edma1_tptc0: tptc@01e38000 {
edma1_tptc0: tptc@238000 {
compatible = "ti,edma3-tptc";
reg = <0x238000 0x400>;
interrupts = <95>;
interrupt-names = "edm3_tcerrint";
};
serial0: serial@1c42000 {
serial0: serial@42000 {
compatible = "ns16550a";
reg = <0x42000 0x100>;
reg-shift = <2>;
interrupts = <25>;
status = "disabled";
};
serial1: serial@1d0c000 {
serial1: serial@10c000 {
compatible = "ns16550a";
reg = <0x10c000 0x100>;
reg-shift = <2>;
interrupts = <53>;
status = "disabled";
};
serial2: serial@1d0d000 {
serial2: serial@10d000 {
compatible = "ns16550a";
reg = <0x10d000 0x100>;
reg-shift = <2>;
interrupts = <61>;
status = "disabled";
};
rtc0: rtc@1c23000 {
rtc0: rtc@23000 {
compatible = "ti,da830-rtc";
reg = <0x23000 0x1000>;
interrupts = <19
19>;
status = "disabled";
};
i2c0: i2c@1c22000 {
i2c0: i2c@22000 {
compatible = "ti,davinci-i2c";
reg = <0x22000 0x1000>;
interrupts = <15>;
@ -226,12 +244,20 @@
#size-cells = <0>;
status = "disabled";
};
wdt: wdt@1c21000 {
i2c1: i2c@228000 {
compatible = "ti,davinci-i2c";
reg = <0x228000 0x1000>;
interrupts = <51>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
wdt: wdt@21000 {
compatible = "ti,davinci-wdt";
reg = <0x21000 0x1000>;
status = "disabled";
};
mmc0: mmc@1c40000 {
mmc0: mmc@40000 {
compatible = "ti,da830-mmc";
reg = <0x40000 0x1000>;
interrupts = <16>;
@ -239,7 +265,7 @@
dma-names = "rx", "tx";
status = "disabled";
};
mmc1: mmc@1e1b000 {
mmc1: mmc@21b000 {
compatible = "ti,da830-mmc";
reg = <0x21b000 0x1000>;
interrupts = <72>;
@ -247,37 +273,47 @@
dma-names = "rx", "tx";
status = "disabled";
};
ehrpwm0: ehrpwm@01f00000 {
ehrpwm0: pwm@300000 {
compatible = "ti,da850-ehrpwm", "ti,am33xx-ehrpwm";
#pwm-cells = <3>;
reg = <0x300000 0x2000>;
status = "disabled";
};
ehrpwm1: ehrpwm@01f02000 {
ehrpwm1: pwm@302000 {
compatible = "ti,da850-ehrpwm", "ti,am33xx-ehrpwm";
#pwm-cells = <3>;
reg = <0x302000 0x2000>;
status = "disabled";
};
ecap0: ecap@01f06000 {
ecap0: ecap@306000 {
compatible = "ti,da850-ecap", "ti,am33xx-ecap";
#pwm-cells = <3>;
reg = <0x306000 0x80>;
status = "disabled";
};
ecap1: ecap@01f07000 {
ecap1: ecap@307000 {
compatible = "ti,da850-ecap", "ti,am33xx-ecap";
#pwm-cells = <3>;
reg = <0x307000 0x80>;
status = "disabled";
};
ecap2: ecap@01f08000 {
ecap2: ecap@308000 {
compatible = "ti,da850-ecap", "ti,am33xx-ecap";
#pwm-cells = <3>;
reg = <0x308000 0x80>;
status = "disabled";
};
spi1: spi@1f0e000 {
spi0: spi@41000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "ti,da830-spi";
reg = <0x41000 0x1000>;
num-cs = <6>;
ti,davinci-spi-intr-line = <1>;
interrupts = <20>;
status = "disabled";
};
spi1: spi@30e000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "ti,da830-spi";
@ -289,13 +325,14 @@
dma-names = "rx", "tx";
status = "disabled";
};
mdio: mdio@1e24000 {
mdio: mdio@224000 {
compatible = "ti,davinci_mdio";
#address-cells = <1>;
#size-cells = <0>;
reg = <0x224000 0x1000>;
status = "disabled";
};
eth0: ethernet@1e20000 {
eth0: ethernet@220000 {
compatible = "ti,davinci-dm6467-emac";
reg = <0x220000 0x4000>;
ti,davinci-ctrl-reg-offset = <0x3000>;
@ -308,10 +345,12 @@
35
36
>;
status = "disabled";
};
gpio: gpio@1e26000 {
gpio: gpio@226000 {
compatible = "ti,dm6441-gpio";
gpio-controller;
#gpio-cells = <2>;
reg = <0x226000 0x1000>;
interrupts = <42 IRQ_TYPE_EDGE_BOTH
43 IRQ_TYPE_EDGE_BOTH 44 IRQ_TYPE_EDGE_BOTH
@ -323,7 +362,7 @@
status = "disabled";
};
mcasp0: mcasp@01d00000 {
mcasp0: mcasp@100000 {
compatible = "ti,da830-mcasp-audio";
reg = <0x100000 0x2000>,
<0x102000 0x400000>;

10
arch/arm/boot/dts/dm814x-clocks.dtsi
View File

@ -156,7 +156,7 @@
};
&pllss_clocks {
timer1_fck: timer1_fck {
timer1_fck: timer1_fck@2e0 {
#clock-cells = <0>;
compatible = "ti,mux-clock";
clocks = <&sysclk18_ck &aud_clkin0_ck &aud_clkin1_ck
@ -165,7 +165,7 @@
reg = <0x2e0>;
};
timer2_fck: timer2_fck {
timer2_fck: timer2_fck@2e0 {
#clock-cells = <0>;
compatible = "ti,mux-clock";
clocks = <&sysclk18_ck &aud_clkin0_ck &aud_clkin1_ck
@ -192,7 +192,7 @@
clock-frequency = <125000000>;
};
sysclk18_ck: sysclk18_ck {
sysclk18_ck: sysclk18_ck@2f0 {
#clock-cells = <0>;
compatible = "ti,mux-clock";
clocks = <&rtcosc_ck>, <&rtcdivider_ck>;
@ -202,7 +202,7 @@
};
&scm_clocks {
devosc_ck: devosc_ck {
devosc_ck: devosc_ck@40 {
#clock-cells = <0>;
compatible = "ti,mux-clock";
clocks = <&virt_20000000_ck>, <&virt_19200000_ck>;
@ -259,7 +259,7 @@
clock-div = <1>;
};
mpu_clksrc_ck: mpu_clksrc_ck {
mpu_clksrc_ck: mpu_clksrc_ck@40 {
#clock-cells = <0>;
compatible = "ti,mux-clock";
clocks = <&devosc_ck>, <&rtcdivider_ck>;

2
arch/arm/boot/dts/dm814x.dtsi
View File

@ -568,6 +568,8 @@
#size-cells = <1>;
interrupt-controller;
#interrupt-cells = <2>;
gpio-controller;
#gpio-cells = <2>;
};
};
};

42
arch/arm/boot/dts/dm816x-clocks.dtsi
View File

@ -86,7 +86,7 @@
/* 0x48180000 */
&prcm_clocks {
clkout_pre_ck: clkout_pre_ck {
clkout_pre_ck: clkout_pre_ck@100 {
#clock-cells = <0>;
compatible = "ti,mux-clock";
clocks = <&main_fapll 5 &ddr_fapll 1 &video_fapll 1
@ -94,7 +94,7 @@
reg = <0x100>;
};
clkout_div_ck: clkout_div_ck {
clkout_div_ck: clkout_div_ck@100 {
#clock-cells = <0>;
compatible = "ti,divider-clock";
clocks = <&clkout_pre_ck>;
@ -103,7 +103,7 @@
reg = <0x100>;
};
clkout_ck: clkout_ck {
clkout_ck: clkout_ck@100 {
#clock-cells = <0>;
compatible = "ti,gate-clock";
clocks = <&clkout_div_ck>;
@ -112,7 +112,7 @@
};
/* CM_DPLL clocks p1795 */
sysclk1_ck: sysclk1_ck {
sysclk1_ck: sysclk1_ck@300 {
#clock-cells = <0>;
compatible = "ti,divider-clock";
clocks = <&main_fapll 1>;
@ -120,7 +120,7 @@
reg = <0x0300>;
};
sysclk2_ck: sysclk2_ck {
sysclk2_ck: sysclk2_ck@304 {
#clock-cells = <0>;
compatible = "ti,divider-clock";
clocks = <&main_fapll 2>;
@ -128,7 +128,7 @@
reg = <0x0304>;
};
sysclk3_ck: sysclk3_ck {
sysclk3_ck: sysclk3_ck@308 {
#clock-cells = <0>;
compatible = "ti,divider-clock";
clocks = <&main_fapll 3>;
@ -136,7 +136,7 @@
reg = <0x0308>;
};
sysclk4_ck: sysclk4_ck {
sysclk4_ck: sysclk4_ck@30c {
#clock-cells = <0>;
compatible = "ti,divider-clock";
clocks = <&main_fapll 4>;
@ -144,7 +144,7 @@
reg = <0x030c>;
};
sysclk5_ck: sysclk5_ck {
sysclk5_ck: sysclk5_ck@310 {
#clock-cells = <0>;
compatible = "ti,divider-clock";
clocks = <&sysclk4_ck>;
@ -152,7 +152,7 @@
reg = <0x0310>;
};
sysclk6_ck: sysclk6_ck {
sysclk6_ck: sysclk6_ck@314 {
#clock-cells = <0>;
compatible = "ti,divider-clock";
clocks = <&main_fapll 4>;
@ -160,7 +160,7 @@
reg = <0x0314>;
};
sysclk10_ck: sysclk10_ck {
sysclk10_ck: sysclk10_ck@324 {
#clock-cells = <0>;
compatible = "ti,divider-clock";
clocks = <&ddr_fapll 2>;
@ -168,7 +168,7 @@
reg = <0x0324>;
};
sysclk24_ck: sysclk24_ck {
sysclk24_ck: sysclk24_ck@3b4 {
#clock-cells = <0>;
compatible = "ti,divider-clock";
clocks = <&main_fapll 5>;
@ -176,7 +176,7 @@
reg = <0x03b4>;
};
mpu_ck: mpu_ck {
mpu_ck: mpu_ck@15dc {
#clock-cells = <0>;
compatible = "ti,gate-clock";
clocks = <&sysclk2_ck>;
@ -184,7 +184,7 @@
reg = <0x15dc>;
};
audio_pll_a_ck: audio_pll_a_ck {
audio_pll_a_ck: audio_pll_a_ck@35c {
#clock-cells = <0>;
compatible = "ti,divider-clock";
clocks = <&audio_fapll 1>;
@ -192,56 +192,56 @@
reg = <0x035c>;
};
sysclk18_ck: sysclk18_ck {
sysclk18_ck: sysclk18_ck@378 {
#clock-cells = <0>;
compatible = "ti,mux-clock";
clocks = <&sys_32k_ck>, <&audio_pll_a_ck>;
reg = <0x0378>;
};
timer1_fck: timer1_fck {
timer1_fck: timer1_fck@390 {
#clock-cells = <0>;
compatible = "ti,mux-clock";
clocks = <&tclkin_ck>, <&sysclk18_ck>, <&sys_clkin_ck>;
reg = <0x0390>;
};
timer2_fck: timer2_fck {
timer2_fck: timer2_fck@394 {
#clock-cells = <0>;
compatible = "ti,mux-clock";
clocks = <&tclkin_ck>, <&sysclk18_ck>, <&sys_clkin_ck>;
reg = <0x0394>;
};
timer3_fck: timer3_fck {
timer3_fck: timer3_fck@398 {
#clock-cells = <0>;
compatible = "ti,mux-clock";
clocks = <&tclkin_ck>, <&sysclk18_ck>, <&sys_clkin_ck>;
reg = <0x0398>;
};
timer4_fck: timer4_fck {
timer4_fck: timer4_fck@39c {
#clock-cells = <0>;
compatible = "ti,mux-clock";
clocks = <&tclkin_ck>, <&sysclk18_ck>, <&sys_clkin_ck>;
reg = <0x039c>;
};
timer5_fck: timer5_fck {
timer5_fck: timer5_fck@3a0 {
#clock-cells = <0>;
compatible = "ti,mux-clock";
clocks = <&tclkin_ck>, <&sysclk18_ck>, <&sys_clkin_ck>;
reg = <0x03a0>;
};
timer6_fck: timer6_fck {
timer6_fck: timer6_fck@3a4 {
#clock-cells = <0>;
compatible = "ti,mux-clock";
clocks = <&tclkin_ck>, <&sysclk18_ck>, <&sys_clkin_ck>;
reg = <0x03a4>;
};
timer7_fck: timer7_fck {
timer7_fck: timer7_fck@3a8 {
#clock-cells = <0>;
compatible = "ti,mux-clock";
clocks = <&tclkin_ck>, <&sysclk18_ck>, <&sys_clkin_ck>;

2
arch/arm/boot/dts/dm816x.dtsi
View File

@ -185,6 +185,8 @@
gpmc,num-waitpins = <2>;
interrupt-controller;
#interrupt-cells = <2>;
gpio-controller;
#gpio-cells = <2>;
};
i2c1: i2c@48028000 {

70
arch/arm/boot/dts/dra7-evm.dts
View File

@ -33,6 +33,7 @@
evm_3v3_sw: fixedregulator-evm_3v3_sw {
compatible = "regulator-fixed";
regulator-name = "evm_3v3_sw";
vin-supply = <&sysen1>;
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
};
@ -64,10 +65,11 @@
regulator-always-on;
regulator-boot-on;
enable-active-high;
vin-supply = <&sysen2>;
gpio = <&gpio7 11 GPIO_ACTIVE_HIGH>;
};
sound0: sound@0 {
sound0: sound0 {
compatible = "simple-audio-card";
simple-audio-card,name = "DRA7xx-EVM";
simple-audio-card,widgets =
@ -224,21 +226,6 @@
>;
};
qspi1_pins: pinmux_qspi1_pins {
pinctrl-single,pins = <
DRA7XX_CORE_IOPAD(0x344c, PIN_INPUT | MUX_MODE1) /* gpmc_a3.qspi1_cs2 */
DRA7XX_CORE_IOPAD(0x3450, PIN_INPUT | MUX_MODE1) /* gpmc_a4.qspi1_cs3 */
DRA7XX_CORE_IOPAD(0x3474, PIN_INPUT | MUX_MODE1) /* gpmc_a13.qspi1_rtclk */
DRA7XX_CORE_IOPAD(0x3478, PIN_INPUT | MUX_MODE1) /* gpmc_a14.qspi1_d3 */
DRA7XX_CORE_IOPAD(0x347c, PIN_INPUT | MUX_MODE1) /* gpmc_a15.qspi1_d2 */
DRA7XX_CORE_IOPAD(0x3480, PIN_INPUT | MUX_MODE1) /* gpmc_a16.qspi1_d1 */
DRA7XX_CORE_IOPAD(0x3484, PIN_INPUT | MUX_MODE1) /* gpmc_a17.qspi1_d0 */
DRA7XX_CORE_IOPAD(0x3488, PIN_INPUT | MUX_MODE1) /* qpmc_a18.qspi1_sclk */
DRA7XX_CORE_IOPAD(0x34b8, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_cs2.qspi1_cs0 */
DRA7XX_CORE_IOPAD(0x34bc, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_cs3.qspi1_cs1 */
>;
};
usb1_pins: pinmux_usb1_pins {
pinctrl-single,pins = <
DRA7XX_CORE_IOPAD(0x3680, PIN_INPUT_SLEW | MUX_MODE0) /* usb1_drvvbus */
@ -254,8 +241,9 @@
nand_flash_x16: nand_flash_x16 {
/* On DRA7 EVM, GPMC_WPN and NAND_BOOTn comes from DIP switch
* So NAND flash requires following switch settings:
* SW5.9 (GPMC_WPN) = LOW
* SW5.1 (NAND_BOOTn) = HIGH */
* SW5.1 (NAND_BOOTn) = ON (LOW)
* SW5.9 (GPMC_WPN) = OFF (HIGH)
*/
pinctrl-single,pins = <
DRA7XX_CORE_IOPAD(0x3400, PIN_INPUT | MUX_MODE0) /* gpmc_ad0 */
DRA7XX_CORE_IOPAD(0x3404, PIN_INPUT | MUX_MODE0) /* gpmc_ad1 */
@ -428,7 +416,7 @@
/* VDD_DSPEVE */
regulator-name = "smps45";
regulator-min-microvolt = < 850000>;
regulator-max-microvolt = <1150000>;
regulator-max-microvolt = <1250000>;
regulator-always-on;
regulator-boot-on;
};
@ -446,7 +434,7 @@
/* CORE_VDD */
regulator-name = "smps7";
regulator-min-microvolt = <850000>;
regulator-max-microvolt = <1060000>;
regulator-max-microvolt = <1150000>;
regulator-always-on;
regulator-boot-on;
};
@ -523,12 +511,37 @@
regulator-max-microvolt = <3300000>;
regulator-boot-on;
};
/* REGEN1 is unused */
regen2: regen2 {
/* Needed for PMIC internal resources */
regulator-name = "regen2";
regulator-boot-on;
regulator-always-on;
};
/* REGEN3 is unused */
sysen1: sysen1 {
/* PMIC_REGEN_3V3 */
regulator-name = "sysen1";
regulator-boot-on;
regulator-always-on;
};
sysen2: sysen2 {
/* PMIC_REGEN_DDR */
regulator-name = "sysen2";
regulator-boot-on;
regulator-always-on;
};
};
};
};
pcf_lcd: gpio@20 {
compatible = "nxp,pcf8575";
compatible = "ti,pcf8575", "nxp,pcf8575";
reg = <0x20>;
gpio-controller;
#gpio-cells = <2>;
@ -539,7 +552,7 @@
};
pcf_gpio_21: gpio@21 {
compatible = "ti,pcf8575";
compatible = "ti,pcf8575", "nxp,pcf8575";
reg = <0x21>;
lines-initial-states = <0x1408>;
gpio-controller;
@ -573,7 +586,7 @@
clock-frequency = <400000>;
pcf_hdmi: gpio@26 {
compatible = "nxp,pcf8575";
compatible = "ti,pcf8575", "nxp,pcf8575";
reg = <0x26>;
gpio-controller;
#gpio-cells = <2>;
@ -650,18 +663,14 @@
&qspi {
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&qspi1_pins>;
spi-max-frequency = <48000000>;
spi-max-frequency = <64000000>;
m25p80@0 {
compatible = "s25fl256s1";
spi-max-frequency = <48000000>;
spi-max-frequency = <64000000>;
reg = <0>;
spi-tx-bus-width = <1>;
spi-rx-bus-width = <4>;
spi-cpol;
spi-cpha;
#address-cells = <1>;
#size-cells = <1>;
@ -748,6 +757,7 @@
interrupt-parent = <&gpmc>;
interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
<1 IRQ_TYPE_NONE>; /* termcount */
rb-gpios = <&gpmc 0 GPIO_ACTIVE_HIGH>; /* gpmc_wait0 pin */
ti,nand-ecc-opt = "bch8";
ti,elm-id = <&elm>;
nand-bus-width = <16>;
@ -904,6 +914,8 @@
serial-dir = < /* 0: INACTIVE, 1: TX, 2: RX */
1 2 0 0
>;
tx-num-evt = <32>;
rx-num-evt = <32>;
};
&mailbox5 {

200
arch/arm/boot/dts/dra7.dtsi
View File

@ -123,7 +123,7 @@
#size-cells = <1>;
ranges = <0 0x0 0x1400>;
pbias_regulator: pbias_regulator {
pbias_regulator: pbias_regulator@e00 {
compatible = "ti,pbias-dra7", "ti,pbias-omap";
reg = <0xe00 0x4>;
syscon = <&scm_conf>;
@ -161,6 +161,24 @@
compatible = "syscon";
reg = <0x1c24 0x0024>;
};
sdma_xbar: dma-router@b78 {
compatible = "ti,dra7-dma-crossbar";
reg = <0xb78 0xfc>;
#dma-cells = <1>;
dma-requests = <205>;
ti,dma-safe-map = <0>;
dma-masters = <&sdma>;
};
edma_xbar: dma-router@c78 {
compatible = "ti,dra7-dma-crossbar";
reg = <0xc78 0x7c>;
#dma-cells = <2>;
dma-requests = <204>;
ti,dma-safe-map = <0>;
dma-masters = <&edma>;
};
};
cm_core_aon: cm_core_aon@5000 {
@ -315,13 +333,43 @@
dma-requests = <127>;
};
sdma_xbar: dma-router@4a002b78 {
compatible = "ti,dra7-dma-crossbar";
reg = <0x4a002b78 0xfc>;
#dma-cells = <1>;
dma-requests = <205>;
ti,dma-safe-map = <0>;
dma-masters = <&sdma>;
edma: edma@43300000 {
compatible = "ti,edma3-tpcc";
ti,hwmods = "tpcc";
reg = <0x43300000 0x100000>;
reg-names = "edma3_cc";
interrupts = <GIC_SPI 361 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "edma3_ccint", "emda3_mperr",
"edma3_ccerrint";
dma-requests = <64>;
#dma-cells = <2>;
ti,tptcs = <&edma_tptc0 7>, <&edma_tptc1 0>;
/*
* memcpy is disabled, can be enabled with:
* ti,edma-memcpy-channels = <20 21>;
* for example. Note that these channels need to be
* masked in the xbar as well.
*/
};
edma_tptc0: tptc@43400000 {
compatible = "ti,edma3-tptc";
ti,hwmods = "tptc0";
reg = <0x43400000 0x100000>;
interrupts = <GIC_SPI 370 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "edma3_tcerrint";
};
edma_tptc1: tptc@43500000 {
compatible = "ti,edma3-tptc";
ti,hwmods = "tptc1";
reg = <0x43500000 0x100000>;
interrupts = <GIC_SPI 371 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "edma3_tcerrint";
};
gpio1: gpio@4ae10000 {
@ -773,12 +821,20 @@
ti,hwmods = "timer11";
};
timer12: timer@4ae20000 {
compatible = "ti,omap5430-timer";
reg = <0x4ae20000 0x80>;
interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "timer12";
ti,timer-alwon;
ti,timer-secure;
};
timer13: timer@48828000 {
compatible = "ti,omap5430-timer";
reg = <0x48828000 0x80>;
interrupts = <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "timer13";
status = "disabled";
};
timer14: timer@4882a000 {
@ -786,7 +842,6 @@
reg = <0x4882a000 0x80>;
interrupts = <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "timer14";
status = "disabled";
};
timer15: timer@4882c000 {
@ -794,7 +849,6 @@
reg = <0x4882c000 0x80>;
interrupts = <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "timer15";
status = "disabled";
};
timer16: timer@4882e000 {
@ -802,7 +856,6 @@
reg = <0x4882e000 0x80>;
interrupts = <GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "timer16";
status = "disabled";
};
wdt2: wdt@4ae14000 {
@ -1404,6 +1457,8 @@
#size-cells = <1>;
interrupt-controller;
#interrupt-cells = <2>;
gpio-controller;
#gpio-cells = <2>;
status = "disabled";
};
@ -1418,21 +1473,136 @@
status = "disabled";
};
mcasp1: mcasp@48460000 {
compatible = "ti,dra7-mcasp-audio";
ti,hwmods = "mcasp1";
reg = <0x48460000 0x2000>,
<0x45800000 0x1000>;
reg-names = "mpu","dat";
interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "tx", "rx";
dmas = <&edma_xbar 129 1>, <&edma_xbar 128 1>;
dma-names = "tx", "rx";
clocks = <&mcasp1_aux_gfclk_mux>, <&mcasp1_ahclkx_mux>,
<&mcasp1_ahclkr_mux>;
clock-names = "fck", "ahclkx", "ahclkr";
status = "disabled";
};
mcasp2: mcasp@48464000 {
compatible = "ti,dra7-mcasp-audio";
ti,hwmods = "mcasp2";
reg = <0x48464000 0x2000>,
<0x45c00000 0x1000>;
reg-names = "mpu","dat";
interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "tx", "rx";
dmas = <&edma_xbar 131 1>, <&edma_xbar 130 1>;
dma-names = "tx", "rx";
clocks = <&mcasp2_aux_gfclk_mux>, <&mcasp2_ahclkx_mux>,
<&mcasp2_ahclkr_mux>;
clock-names = "fck", "ahclkx", "ahclkr";
status = "disabled";
};
mcasp3: mcasp@48468000 {
compatible = "ti,dra7-mcasp-audio";
ti,hwmods = "mcasp3";
reg = <0x48468000 0x2000>;
reg-names = "mpu";
reg = <0x48468000 0x2000>,
<0x46000000 0x1000>;
reg-names = "mpu","dat";
interrupts = <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "tx", "rx";
dmas = <&sdma_xbar 133>, <&sdma_xbar 132>;
dmas = <&edma_xbar 133 1>, <&edma_xbar 132 1>;
dma-names = "tx", "rx";
clocks = <&mcasp3_aux_gfclk_mux>, <&mcasp3_ahclkx_mux>;
clock-names = "fck", "ahclkx";
status = "disabled";
};
mcasp4: mcasp@4846c000 {
compatible = "ti,dra7-mcasp-audio";
ti,hwmods = "mcasp4";
reg = <0x4846c000 0x2000>,
<0x48436000 0x1000>;
reg-names = "mpu","dat";
interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "tx", "rx";
dmas = <&edma_xbar 135 1>, <&edma_xbar 134 1>;
dma-names = "tx", "rx";
clocks = <&mcasp4_aux_gfclk_mux>, <&mcasp4_ahclkx_mux>;
clock-names = "fck", "ahclkx";
status = "disabled";
};
mcasp5: mcasp@48470000 {
compatible = "ti,dra7-mcasp-audio";
ti,hwmods = "mcasp5";
reg = <0x48470000 0x2000>,
<0x4843a000 0x1000>;
reg-names = "mpu","dat";
interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "tx", "rx";
dmas = <&edma_xbar 137 1>, <&edma_xbar 136 1>;
dma-names = "tx", "rx";
clocks = <&mcasp5_aux_gfclk_mux>, <&mcasp5_ahclkx_mux>;
clock-names = "fck", "ahclkx";
status = "disabled";
};
mcasp6: mcasp@48474000 {
compatible = "ti,dra7-mcasp-audio";
ti,hwmods = "mcasp6";
reg = <0x48474000 0x2000>,
<0x4844c000 0x1000>;
reg-names = "mpu","dat";
interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "tx", "rx";
dmas = <&edma_xbar 139 1>, <&edma_xbar 138 1>;
dma-names = "tx", "rx";
clocks = <&mcasp6_aux_gfclk_mux>, <&mcasp6_ahclkx_mux>;
clock-names = "fck", "ahclkx";
status = "disabled";
};
mcasp7: mcasp@48478000 {
compatible = "ti,dra7-mcasp-audio";
ti,hwmods = "mcasp7";
reg = <0x48478000 0x2000>,
<0x48450000 0x1000>;
reg-names = "mpu","dat";
interrupts = <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "tx", "rx";
dmas = <&edma_xbar 141 1>, <&edma_xbar 140 1>;
dma-names = "tx", "rx";
clocks = <&mcasp7_aux_gfclk_mux>, <&mcasp7_ahclkx_mux>;
clock-names = "fck", "ahclkx";
status = "disabled";
};
mcasp8: mcasp@4847c000 {
compatible = "ti,dra7-mcasp-audio";
ti,hwmods = "mcasp8";
reg = <0x4847c000 0x2000>,
<0x48454000 0x1000>;
reg-names = "mpu","dat";
interrupts = <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "tx", "rx";
dmas = <&edma_xbar 143 1>, <&edma_xbar 142 1>;
dma-names = "tx", "rx";
clocks = <&mcasp8_aux_gfclk_mux>, <&mcasp8_ahclkx_mux>;
clock-names = "fck", "ahclkx";
status = "disabled";
};
crossbar_mpu: crossbar@4a002a48 {
compatible = "ti,irq-crossbar";
reg = <0x4a002a48 0x130>;

817
arch/arm/boot/dts/dra72-evm-common.dtsi Normal file
View File

@ -0,0 +1,817 @@
/*
* Copyright (C) 2014-2016 Texas Instruments Incorporated - http://www.ti.com/
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
/dts-v1/;
#include "dra72x.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/clk/ti-dra7-atl.h>
/ {
compatible = "ti,dra72-evm", "ti,dra722", "ti,dra72", "ti,dra7";
aliases {
display0 = &hdmi0;
};
evm_3v3: fixedregulator-evm_3v3 {
compatible = "regulator-fixed";
regulator-name = "evm_3v3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
};
aic_dvdd: fixedregulator-aic_dvdd {
/* TPS77018DBVT */
compatible = "regulator-fixed";
regulator-name = "aic_dvdd";
vin-supply = <&evm_3v3>;
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
evm_3v3_sd: fixedregulator-sd {
compatible = "regulator-fixed";
regulator-name = "evm_3v3_sd";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
enable-active-high;
gpio = <&pcf_gpio_21 5 GPIO_ACTIVE_HIGH>;
};
extcon_usb1: extcon_usb1 {
compatible = "linux,extcon-usb-gpio";
id-gpio = <&pcf_gpio_21 1 GPIO_ACTIVE_HIGH>;
};
extcon_usb2: extcon_usb2 {
compatible = "linux,extcon-usb-gpio";
id-gpio = <&pcf_gpio_21 2 GPIO_ACTIVE_HIGH>;
};
hdmi0: connector {
compatible = "hdmi-connector";
label = "hdmi";
type = "a";
port {
hdmi_connector_in: endpoint {
remote-endpoint = <&tpd12s015_out>;
};
};
};
tpd12s015: encoder {
compatible = "ti,tpd12s015";
pinctrl-names = "default";
pinctrl-0 = <&tpd12s015_pins>;
gpios = <&pcf_hdmi 4 GPIO_ACTIVE_HIGH>, /* P4, CT CP HPD */
<&pcf_hdmi 5 GPIO_ACTIVE_HIGH>, /* P5, LS OE */
<&gpio7 12 GPIO_ACTIVE_HIGH>; /* gpio7_12/sp1_cs2, HPD */
ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
tpd12s015_in: endpoint {
remote-endpoint = <&hdmi_out>;
};
};
port@1 {
reg = <1>;
tpd12s015_out: endpoint {
remote-endpoint = <&hdmi_connector_in>;
};
};
};
};
sound0: sound0 {
compatible = "simple-audio-card";
simple-audio-card,name = "DRA7xx-EVM";
simple-audio-card,widgets =
"Headphone", "Headphone Jack",
"Line", "Line Out",
"Microphone", "Mic Jack",
"Line", "Line In";
simple-audio-card,routing =
"Headphone Jack", "HPLOUT",
"Headphone Jack", "HPROUT",
"Line Out", "LLOUT",
"Line Out", "RLOUT",
"MIC3L", "Mic Jack",
"MIC3R", "Mic Jack",
"Mic Jack", "Mic Bias",
"LINE1L", "Line In",
"LINE1R", "Line In";
simple-audio-card,format = "dsp_b";
simple-audio-card,bitclock-master = <&sound0_master>;
simple-audio-card,frame-master = <&sound0_master>;
simple-audio-card,bitclock-inversion;
sound0_master: simple-audio-card,cpu {
sound-dai = <&mcasp3>;
system-clock-frequency = <5644800>;
};
simple-audio-card,codec {
sound-dai = <&tlv320aic3106>;
clocks = <&atl_clkin2_ck>;
};
};
};
&dra7_pmx_core {
i2c1_pins: pinmux_i2c1_pins {
pinctrl-single,pins = <
DRA7XX_CORE_IOPAD(0x3800, PIN_INPUT | MUX_MODE0) /* i2c1_sda.i2c1_sda */
DRA7XX_CORE_IOPAD(0x3804, PIN_INPUT | MUX_MODE0) /* i2c1_scl.i2c1_scl */
>;
};
i2c5_pins: pinmux_i2c5_pins {
pinctrl-single,pins = <
DRA7XX_CORE_IOPAD(0x36b4, PIN_INPUT | MUX_MODE10) /* mcasp1_axr0.i2c5_sda */
DRA7XX_CORE_IOPAD(0x36b8, PIN_INPUT | MUX_MODE10) /* mcasp1_axr1.i2c5_scl */
>;
};
i2c5_pins: pinmux_i2c5_pins {
pinctrl-single,pins = <
DRA7XX_CORE_IOPAD(0x36b4, PIN_INPUT | MUX_MODE10) /* mcasp1_axr0.i2c5_sda */
DRA7XX_CORE_IOPAD(0x36b8, PIN_INPUT | MUX_MODE10) /* mcasp1_axr1.i2c5_scl */
>;
};
nand_default: nand_default {
pinctrl-single,pins = <
DRA7XX_CORE_IOPAD(0x3400, PIN_INPUT | MUX_MODE0) /* gpmc_ad0 */
DRA7XX_CORE_IOPAD(0x3404, PIN_INPUT | MUX_MODE0) /* gpmc_ad1 */
DRA7XX_CORE_IOPAD(0x3408, PIN_INPUT | MUX_MODE0) /* gpmc_ad2 */
DRA7XX_CORE_IOPAD(0x340c, PIN_INPUT | MUX_MODE0) /* gpmc_ad3 */
DRA7XX_CORE_IOPAD(0x3410, PIN_INPUT | MUX_MODE0) /* gpmc_ad4 */
DRA7XX_CORE_IOPAD(0x3414, PIN_INPUT | MUX_MODE0) /* gpmc_ad5 */
DRA7XX_CORE_IOPAD(0x3418, PIN_INPUT | MUX_MODE0) /* gpmc_ad6 */
DRA7XX_CORE_IOPAD(0x341c, PIN_INPUT | MUX_MODE0) /* gpmc_ad7 */
DRA7XX_CORE_IOPAD(0x3420, PIN_INPUT | MUX_MODE0) /* gpmc_ad8 */
DRA7XX_CORE_IOPAD(0x3424, PIN_INPUT | MUX_MODE0) /* gpmc_ad9 */
DRA7XX_CORE_IOPAD(0x3428, PIN_INPUT | MUX_MODE0) /* gpmc_ad10 */
DRA7XX_CORE_IOPAD(0x342c, PIN_INPUT | MUX_MODE0) /* gpmc_ad11 */
DRA7XX_CORE_IOPAD(0x3430, PIN_INPUT | MUX_MODE0) /* gpmc_ad12 */
DRA7XX_CORE_IOPAD(0x3434, PIN_INPUT | MUX_MODE0) /* gpmc_ad13 */
DRA7XX_CORE_IOPAD(0x3438, PIN_INPUT | MUX_MODE0) /* gpmc_ad14 */
DRA7XX_CORE_IOPAD(0x343c, PIN_INPUT | MUX_MODE0) /* gpmc_ad15 */
DRA7XX_CORE_IOPAD(0x34b4, PIN_OUTPUT | MUX_MODE0) /* gpmc_cs0 */
DRA7XX_CORE_IOPAD(0x34c4, PIN_OUTPUT | MUX_MODE0) /* gpmc_advn_ale */
DRA7XX_CORE_IOPAD(0x34cc, PIN_OUTPUT | MUX_MODE0) /* gpmc_wen */
DRA7XX_CORE_IOPAD(0x34c8, PIN_OUTPUT | MUX_MODE0) /* gpmc_oen_ren */
DRA7XX_CORE_IOPAD(0x34d0, PIN_OUTPUT | MUX_MODE0) /* gpmc_ben0 */
DRA7XX_CORE_IOPAD(0x34d8, PIN_INPUT | MUX_MODE0) /* gpmc_wait0 */
>;
};
usb1_pins: pinmux_usb1_pins {
pinctrl-single,pins = <
DRA7XX_CORE_IOPAD(0x3680, PIN_INPUT_SLEW | MUX_MODE0) /* usb1_drvvbus */
>;
};
usb2_pins: pinmux_usb2_pins {
pinctrl-single,pins = <
DRA7XX_CORE_IOPAD(0x3684, PIN_INPUT_SLEW | MUX_MODE0) /* usb2_drvvbus */
>;
};
tps65917_pins_default: tps65917_pins_default {
pinctrl-single,pins = <
DRA7XX_CORE_IOPAD(0x3824, PIN_INPUT_PULLUP | MUX_MODE1) /* wakeup3.sys_nirq1 */
>;
};
mmc1_pins_default: mmc1_pins_default {
pinctrl-single,pins = <
DRA7XX_CORE_IOPAD(0x376c, PIN_INPUT | MUX_MODE14) /* mmc1sdcd.gpio219 */
DRA7XX_CORE_IOPAD(0x3754, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_clk.clk */
DRA7XX_CORE_IOPAD(0x3758, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_cmd.cmd */
DRA7XX_CORE_IOPAD(0x375c, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat0.dat0 */
DRA7XX_CORE_IOPAD(0x3760, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat1.dat1 */
DRA7XX_CORE_IOPAD(0x3764, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat2.dat2 */
DRA7XX_CORE_IOPAD(0x3768, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat3.dat3 */
>;
};
mmc2_pins_default: mmc2_pins_default {
pinctrl-single,pins = <
DRA7XX_CORE_IOPAD(0x349c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a23.mmc2_clk */
DRA7XX_CORE_IOPAD(0x34b0, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_cs1.mmc2_cmd */
DRA7XX_CORE_IOPAD(0x34a0, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a24.mmc2_dat0 */
DRA7XX_CORE_IOPAD(0x34a4, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a25.mmc2_dat1 */
DRA7XX_CORE_IOPAD(0x34a8, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a26.mmc2_dat2 */
DRA7XX_CORE_IOPAD(0x34ac, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a27.mmc2_dat3 */
DRA7XX_CORE_IOPAD(0x348c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a19.mmc2_dat4 */
DRA7XX_CORE_IOPAD(0x3490, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a20.mmc2_dat5 */
DRA7XX_CORE_IOPAD(0x3494, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a21.mmc2_dat6 */
DRA7XX_CORE_IOPAD(0x3498, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a22.mmc2_dat7 */
>;
};
dcan1_pins_default: dcan1_pins_default {
pinctrl-single,pins = <
DRA7XX_CORE_IOPAD(0x37d0, PIN_OUTPUT_PULLUP | MUX_MODE0) /* dcan1_tx */
DRA7XX_CORE_IOPAD(0x3818, PULL_UP | MUX_MODE1) /* wakeup0.dcan1_rx */
>;
};
dcan1_pins_sleep: dcan1_pins_sleep {
pinctrl-single,pins = <
DRA7XX_CORE_IOPAD(0x37d0, MUX_MODE15 | PULL_UP) /* dcan1_tx.off */
DRA7XX_CORE_IOPAD(0x3818, MUX_MODE15 | PULL_UP) /* wakeup0.off */
>;
};
hdmi_pins: pinmux_hdmi_pins {
pinctrl-single,pins = <
DRA7XX_CORE_IOPAD(0x3808, PIN_INPUT | MUX_MODE1) /* i2c2_sda.hdmi1_ddc_scl */
DRA7XX_CORE_IOPAD(0x380c, PIN_INPUT | MUX_MODE1) /* i2c2_scl.hdmi1_ddc_sda */
>;
};
tpd12s015_pins: pinmux_tpd12s015_pins {
pinctrl-single,pins = <
DRA7XX_CORE_IOPAD(0x37b8, PIN_INPUT_PULLDOWN | MUX_MODE14) /* gpio7_12 HPD */
>;
};
atl_pins: pinmux_atl_pins {
pinctrl-single,pins = <
DRA7XX_CORE_IOPAD(0x3698, PIN_OUTPUT | MUX_MODE5) /* xref_clk1.atl_clk1 */
DRA7XX_CORE_IOPAD(0x369c, PIN_OUTPUT | MUX_MODE5) /* xref_clk2.atl_clk2 */
>;
};
mcasp3_pins: pinmux_mcasp3_pins {
pinctrl-single,pins = <
DRA7XX_CORE_IOPAD(0x3724, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mcasp3_aclkx */
DRA7XX_CORE_IOPAD(0x3728, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mcasp3_fsx */
DRA7XX_CORE_IOPAD(0x372c, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mcasp3_axr0 */
DRA7XX_CORE_IOPAD(0x3730, PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcasp3_axr1 */
>;
};
mcasp3_sleep_pins: pinmux_mcasp3_sleep_pins {
pinctrl-single,pins = <
DRA7XX_CORE_IOPAD(0x3724, PIN_INPUT_PULLDOWN | MUX_MODE15)
DRA7XX_CORE_IOPAD(0x3728, PIN_INPUT_PULLDOWN | MUX_MODE15)
DRA7XX_CORE_IOPAD(0x372c, PIN_INPUT_PULLDOWN | MUX_MODE15)
DRA7XX_CORE_IOPAD(0x3730, PIN_INPUT_PULLDOWN | MUX_MODE15)
>;
};
};
&i2c1 {
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&i2c1_pins>;
clock-frequency = <400000>;
tps65917: tps65917@58 {
compatible = "ti,tps65917";
reg = <0x58>;
pinctrl-names = "default";
pinctrl-0 = <&tps65917_pins_default>;
interrupts = <GIC_SPI 2 IRQ_TYPE_NONE>; /* IRQ_SYS_1N */
interrupt-controller;
#interrupt-cells = <2>;
ti,system-power-controller;
tps65917_pmic {
compatible = "ti,tps65917-pmic";
tps65917_regulators: regulators {
smps1_reg: smps1 {
/* VDD_MPU */
regulator-name = "smps1";
regulator-min-microvolt = <850000>;
regulator-max-microvolt = <1250000>;
regulator-always-on;
regulator-boot-on;
};
smps2_reg: smps2 {
/* VDD_CORE */
regulator-name = "smps2";
regulator-min-microvolt = <850000>;
regulator-max-microvolt = <1150000>;
regulator-boot-on;
regulator-always-on;
};
smps3_reg: smps3 {
/* VDD_GPU IVA DSPEVE */
regulator-name = "smps3";
regulator-min-microvolt = <850000>;
regulator-max-microvolt = <1250000>;
regulator-boot-on;
regulator-always-on;
};
smps4_reg: smps4 {
/* VDDS1V8 */
regulator-name = "smps4";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
regulator-boot-on;
};
smps5_reg: smps5 {
/* VDD_DDR */
regulator-name = "smps5";
regulator-min-microvolt = <1350000>;
regulator-max-microvolt = <1350000>;
regulator-boot-on;
regulator-always-on;
};
ldo1_reg: ldo1 {
/* LDO1_OUT --> SDIO */
regulator-name = "ldo1";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
regulator-boot-on;
regulator-allow-bypass;
};
ldo3_reg: ldo3 {
/* VDDA_1V8_PHY */
regulator-name = "ldo3";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-boot-on;
regulator-always-on;
};
ldo5_reg: ldo5 {
/* VDDA_1V8_PLL */
regulator-name = "ldo5";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
regulator-boot-on;
};
ldo4_reg: ldo4 {
/* VDDA_3V_USB: VDDA_USBHS33 */
regulator-name = "ldo4";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-boot-on;
};
};
};
tps65917_power_button {
compatible = "ti,palmas-pwrbutton";
interrupt-parent = <&tps65917>;
interrupts = <1 IRQ_TYPE_NONE>;
wakeup-source;
ti,palmas-long-press-seconds = <6>;
};
};
pcf_gpio_21: gpio@21 {
compatible = "ti,pcf8575", "nxp,pcf8575";
reg = <0x21>;
lines-initial-states = <0x1408>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
tlv320aic3106: tlv320aic3106@19 {
#sound-dai-cells = <0>;
compatible = "ti,tlv320aic3106";
reg = <0x19>;
adc-settle-ms = <40>;
ai3x-micbias-vg = <1>; /* 2.0V */
status = "okay";
/* Regulators */
AVDD-supply = <&evm_3v3>;
IOVDD-supply = <&evm_3v3>;
DRVDD-supply = <&evm_3v3>;
DVDD-supply = <&aic_dvdd>;
};
};
&i2c5 {
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&i2c5_pins>;
clock-frequency = <400000>;
pcf_hdmi: pcf8575@26 {
compatible = "ti,pcf8575", "nxp,pcf8575";
reg = <0x26>;
gpio-controller;
#gpio-cells = <2>;
/*
* initial state is used here to keep the mdio interface
* selected on RU89 through SEL_VIN4_MUX_S0, VIN2_S1 and
* VIN2_S0 driven high otherwise Ethernet stops working
* VIN6_SEL_S0 is low, thus selecting McASP3 over VIN6
*/
lines-initial-states = <0x0f2b>;
p1 {
/* vin6_sel_s0: high: VIN6, low: audio */
gpio-hog;
gpios = <1 GPIO_ACTIVE_HIGH>;
output-low;
line-name = "vin6_sel_s0";
};
};
};
&uart1 {
status = "okay";
interrupts-extended = <&crossbar_mpu GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>,
<&dra7_pmx_core 0x3e0>;
};
&elm {
status = "okay";
};
&gpmc {
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&nand_default>;
ranges = <0 0 0x08000000 0x01000000>; /* minimum GPMC partition = 16MB */
nand@0,0 {
/* To use NAND, DIP switch SW5 must be set like so:
* SW5.1 (NAND_SELn) = ON (LOW)
* SW5.9 (GPMC_WPN) = OFF (HIGH)
*/
compatible = "ti,omap2-nand";
reg = <0 0 4>; /* device IO registers */
interrupt-parent = <&gpmc>;
interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
<1 IRQ_TYPE_NONE>; /* termcount */
rb-gpios = <&gpmc 0 GPIO_ACTIVE_HIGH>; /* gpmc_wait0 pin */
ti,nand-ecc-opt = "bch8";
ti,elm-id = <&elm>;
nand-bus-width = <16>;
gpmc,device-width = <2>;
gpmc,sync-clk-ps = <0>;
gpmc,cs-on-ns = <0>;
gpmc,cs-rd-off-ns = <80>;
gpmc,cs-wr-off-ns = <80>;
gpmc,adv-on-ns = <0>;
gpmc,adv-rd-off-ns = <60>;
gpmc,adv-wr-off-ns = <60>;
gpmc,we-on-ns = <10>;
gpmc,we-off-ns = <50>;
gpmc,oe-on-ns = <4>;
gpmc,oe-off-ns = <40>;
gpmc,access-ns = <40>;
gpmc,wr-access-ns = <80>;
gpmc,rd-cycle-ns = <80>;
gpmc,wr-cycle-ns = <80>;
gpmc,bus-turnaround-ns = <0>;
gpmc,cycle2cycle-delay-ns = <0>;
gpmc,clk-activation-ns = <0>;
gpmc,wr-data-mux-bus-ns = <0>;
/* MTD partition table */
/* All SPL-* partitions are sized to minimal length
* which can be independently programmable. For
* NAND flash this is equal to size of erase-block */
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "NAND.SPL";
reg = <0x00000000 0x000020000>;
};
partition@1 {
label = "NAND.SPL.backup1";
reg = <0x00020000 0x00020000>;
};
partition@2 {
label = "NAND.SPL.backup2";
reg = <0x00040000 0x00020000>;
};
partition@3 {
label = "NAND.SPL.backup3";
reg = <0x00060000 0x00020000>;
};
partition@4 {
label = "NAND.u-boot-spl-os";
reg = <0x00080000 0x00040000>;
};
partition@5 {
label = "NAND.u-boot";
reg = <0x000c0000 0x00100000>;
};
partition@6 {
label = "NAND.u-boot-env";
reg = <0x001c0000 0x00020000>;
};
partition@7 {
label = "NAND.u-boot-env.backup1";
reg = <0x001e0000 0x00020000>;
};
partition@8 {
label = "NAND.kernel";
reg = <0x00200000 0x00800000>;
};
partition@9 {
label = "NAND.file-system";
reg = <0x00a00000 0x0f600000>;
};
};
};
&usb2_phy1 {
phy-supply = <&ldo4_reg>;
};
&usb2_phy2 {
phy-supply = <&ldo4_reg>;
};
&omap_dwc3_1 {
extcon = <&extcon_usb1>;
};
&omap_dwc3_2 {
extcon = <&extcon_usb2>;
};
&usb1 {
dr_mode = "peripheral";
pinctrl-names = "default";
pinctrl-0 = <&usb1_pins>;
};
&usb2 {
dr_mode = "host";
pinctrl-names = "default";
pinctrl-0 = <&usb2_pins>;
};
&mmc1 {
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&mmc1_pins_default>;
vmmc-supply = <&evm_3v3_sd>;
vmmc_aux-supply = <&ldo1_reg>;
bus-width = <4>;
/*
* SDCD signal is not being used here - using the fact that GPIO mode
* is a viable alternative
*/
cd-gpios = <&gpio6 27 GPIO_ACTIVE_LOW>;
max-frequency = <192000000>;
};
&mmc2 {
/* SW5-3 in ON position */
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&mmc2_pins_default>;
vmmc-supply = <&evm_3v3>;
bus-width = <8>;
ti,non-removable;
max-frequency = <192000000>;
};
&dra7_pmx_core {
cpsw_default: cpsw_default {
pinctrl-single,pins = <
/* Slave 2 */
DRA7XX_CORE_IOPAD(0x3598, PIN_OUTPUT | MUX_MODE3) /* vin2a_d12.rgmii1_txc */
DRA7XX_CORE_IOPAD(0x359c, PIN_OUTPUT | MUX_MODE3) /* vin2a_d13.rgmii1_tctl */
DRA7XX_CORE_IOPAD(0x35a0, PIN_OUTPUT | MUX_MODE3) /* vin2a_d14.rgmii1_td3 */
DRA7XX_CORE_IOPAD(0x35a4, PIN_OUTPUT | MUX_MODE3) /* vin2a_d15.rgmii1_td2 */
DRA7XX_CORE_IOPAD(0x35a8, PIN_OUTPUT | MUX_MODE3) /* vin2a_d16.rgmii1_td1 */
DRA7XX_CORE_IOPAD(0x35ac, PIN_OUTPUT | MUX_MODE3) /* vin2a_d17.rgmii1_td0 */
DRA7XX_CORE_IOPAD(0x35b0, PIN_INPUT | MUX_MODE3) /* vin2a_d18.rgmii1_rclk */
DRA7XX_CORE_IOPAD(0x35b4, PIN_INPUT | MUX_MODE3) /* vin2a_d19.rgmii1_rctl */
DRA7XX_CORE_IOPAD(0x35b8, PIN_INPUT | MUX_MODE3) /* vin2a_d20.rgmii1_rd3 */
DRA7XX_CORE_IOPAD(0x35bc, PIN_INPUT | MUX_MODE3) /* vin2a_d21.rgmii1_rd2 */
DRA7XX_CORE_IOPAD(0x35c0, PIN_INPUT | MUX_MODE3) /* vin2a_d22.rgmii1_rd1 */
DRA7XX_CORE_IOPAD(0x35c4, PIN_INPUT | MUX_MODE3) /* vin2a_d23.rgmii1_rd0 */
>;
};
cpsw_sleep: cpsw_sleep {
pinctrl-single,pins = <
/* Slave 2 */
DRA7XX_CORE_IOPAD(0x3598, MUX_MODE15)
DRA7XX_CORE_IOPAD(0x359c, MUX_MODE15)
DRA7XX_CORE_IOPAD(0x35a0, MUX_MODE15)
DRA7XX_CORE_IOPAD(0x35a4, MUX_MODE15)
DRA7XX_CORE_IOPAD(0x35a8, MUX_MODE15)
DRA7XX_CORE_IOPAD(0x35ac, MUX_MODE15)
DRA7XX_CORE_IOPAD(0x35b0, MUX_MODE15)
DRA7XX_CORE_IOPAD(0x35b4, MUX_MODE15)
DRA7XX_CORE_IOPAD(0x35b8, MUX_MODE15)
DRA7XX_CORE_IOPAD(0x35bc, MUX_MODE15)
DRA7XX_CORE_IOPAD(0x35c0, MUX_MODE15)
DRA7XX_CORE_IOPAD(0x35c4, MUX_MODE15)
>;
};
davinci_mdio_default: davinci_mdio_default {
pinctrl-single,pins = <
/* MDIO */
DRA7XX_CORE_IOPAD(0x363c, PIN_OUTPUT_PULLUP | MUX_MODE0) /* mdio_d.mdio_d */
DRA7XX_CORE_IOPAD(0x3640, PIN_INPUT_PULLUP | MUX_MODE0) /* mdio_clk.mdio_clk */
>;
};
davinci_mdio_sleep: davinci_mdio_sleep {
pinctrl-single,pins = <
DRA7XX_CORE_IOPAD(0x363c, MUX_MODE15)
DRA7XX_CORE_IOPAD(0x3640, MUX_MODE15)
>;
};
};
&mac {
status = "okay";
pinctrl-names = "default", "sleep";
pinctrl-0 = <&cpsw_default>;
pinctrl-1 = <&cpsw_sleep>;
};
&davinci_mdio {
pinctrl-names = "default", "sleep";
pinctrl-0 = <&davinci_mdio_default>;
pinctrl-1 = <&davinci_mdio_sleep>;
};
&dcan1 {
status = "ok";
pinctrl-names = "default", "sleep", "active";
pinctrl-0 = <&dcan1_pins_sleep>;
pinctrl-1 = <&dcan1_pins_sleep>;
pinctrl-2 = <&dcan1_pins_default>;
};
&qspi {
status = "okay";
spi-max-frequency = <64000000>;
m25p80@0 {
compatible = "s25fl256s1";
spi-max-frequency = <64000000>;
reg = <0>;
spi-tx-bus-width = <1>;
spi-rx-bus-width = <4>;
#address-cells = <1>;
#size-cells = <1>;
/* MTD partition table.
* The ROM checks the first four physical blocks
* for a valid file to boot and the flash here is
* 64KiB block size.
*/
partition@0 {
label = "QSPI.SPL";
reg = <0x00000000 0x000010000>;
};
partition@1 {
label = "QSPI.SPL.backup1";
reg = <0x00010000 0x00010000>;
};
partition@2 {
label = "QSPI.SPL.backup2";
reg = <0x00020000 0x00010000>;
};
partition@3 {
label = "QSPI.SPL.backup3";
reg = <0x00030000 0x00010000>;
};
partition@4 {
label = "QSPI.u-boot";
reg = <0x00040000 0x00100000>;
};
partition@5 {
label = "QSPI.u-boot-spl-os";
reg = <0x00140000 0x00080000>;
};
partition@6 {
label = "QSPI.u-boot-env";
reg = <0x001c0000 0x00010000>;
};
partition@7 {
label = "QSPI.u-boot-env.backup1";
reg = <0x001d0000 0x0010000>;
};
partition@8 {
label = "QSPI.kernel";
reg = <0x001e0000 0x0800000>;
};
partition@9 {
label = "QSPI.file-system";
reg = <0x009e0000 0x01620000>;
};
};
};
&dss {
status = "ok";
vdda_video-supply = <&ldo5_reg>;
};
&hdmi {
status = "ok";
pinctrl-names = "default";
pinctrl-0 = <&hdmi_pins>;
port {
hdmi_out: endpoint {
remote-endpoint = <&tpd12s015_in>;
};
};
};
&atl {
pinctrl-names = "default";
pinctrl-0 = <&atl_pins>;
assigned-clocks = <&abe_dpll_sys_clk_mux>,
<&atl_gfclk_mux>,
<&dpll_abe_ck>,
<&dpll_abe_m2x2_ck>,
<&atl_clkin2_ck>;
assigned-clock-parents = <&sys_clkin2>, <&dpll_abe_m2_ck>;
assigned-clock-rates = <0>, <0>, <180633600>, <361267200>, <5644800>;
status = "okay";
atl2 {
bws = <DRA7_ATL_WS_MCASP2_FSX>;
aws = <DRA7_ATL_WS_MCASP3_FSX>;
};
};
&mcasp3 {
#sound-dai-cells = <0>;
pinctrl-names = "default", "sleep";
pinctrl-0 = <&mcasp3_pins>;
pinctrl-1 = <&mcasp3_sleep_pins>;
assigned-clocks = <&mcasp3_ahclkx_mux>;
assigned-clock-parents = <&atl_clkin2_ck>;
status = "okay";
op-mode = <0>; /* MCASP_IIS_MODE */
tdm-slots = <2>;
/* 4 serializer */
serial-dir = < /* 0: INACTIVE, 1: TX, 2: RX */
1 2 0 0
>;
tx-num-evt = <32>;
rx-num-evt = <32>;
};
&mailbox5 {
status = "okay";
mbox_ipu1_ipc3x: mbox_ipu1_ipc3x {
status = "okay";
};
mbox_dsp1_ipc3x: mbox_dsp1_ipc3x {
status = "okay";
};
};
&mailbox6 {
status = "okay";
mbox_ipu2_ipc3x: mbox_ipu2_ipc3x {
status = "okay";
};
};

73
arch/arm/boot/dts/dra72-evm-revc.dts Normal file
View File

@ -0,0 +1,73 @@
/*
* Copyright (C) 2016 Texas Instruments Incorporated - http://www.ti.com/
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include "dra72-evm-common.dtsi"
#include <dt-bindings/net/ti-dp83867.h>
/ {
model = "TI DRA722 Rev C EVM";
memory {
device_type = "memory";
reg = <0x0 0x80000000 0x0 0x80000000>; /* 2GB */
};
};
&tps65917_regulators {
ldo2_reg: ldo2 {
/* LDO2_OUT --> VDDA_1V8_PHY2 */
regulator-name = "ldo2";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
regulator-boot-on;
};
};
&hdmi {
vdda-supply = <&ldo2_reg>;
};
&pcf_gpio_21 {
interrupt-parent = <&gpio3>;
interrupts = <30 IRQ_TYPE_EDGE_FALLING>;
};
&mac {
mode-gpios = <&pcf_gpio_21 4 GPIO_ACTIVE_LOW>,
<&pcf_hdmi 9 GPIO_ACTIVE_LOW>, /* P11 */
<&pcf_hdmi 10 GPIO_ACTIVE_LOW>; /* P12 */
dual_emac;
};
&cpsw_emac0 {
phy_id = <&davinci_mdio>, <2>;
phy-mode = "rgmii-id";
dual_emac_res_vlan = <1>;
};
&cpsw_emac1 {
phy_id = <&davinci_mdio>, <3>;
phy-mode = "rgmii-id";
dual_emac_res_vlan = <2>;
};
&davinci_mdio {
dp83867_0: ethernet-phy@2 {
reg = <2>;
ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
ti,tx-internal-delay = <DP83867_RGMIIDCTL_1_NS>;
ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_8_B_NIB>;
};
dp83867_1: ethernet-phy@3 {
reg = <3>;
ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
ti,tx-internal-delay = <DP83867_RGMIIDCTL_1_NS>;
ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_8_B_NIB>;
};
};

835
arch/arm/boot/dts/dra72-evm.dts
View File

@ -1,694 +1,40 @@
/*
* Copyright (C) 2014 Texas Instruments Incorporated - http://www.ti.com/
* Copyright (C) 2014-2016 Texas Instruments Incorporated - http://www.ti.com/
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
/dts-v1/;
#include "dra72x.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/clk/ti-dra7-atl.h>
#include "dra72-evm-common.dtsi"
/ {
model = "TI DRA722";
compatible = "ti,dra72-evm", "ti,dra722", "ti,dra72", "ti,dra7";
memory {
device_type = "memory";
reg = <0x0 0x80000000 0x0 0x40000000>; /* 1024 MB */
};
};
aliases {
display0 = &hdmi0;
};
evm_3v3: fixedregulator-evm_3v3 {
compatible = "regulator-fixed";
regulator-name = "evm_3v3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
};
aic_dvdd: fixedregulator-aic_dvdd {
/* TPS77018DBVT */
compatible = "regulator-fixed";
regulator-name = "aic_dvdd";
vin-supply = <&evm_3v3>;
&tps65917_regulators {
ldo2_reg: ldo2 {
/* LDO2_OUT --> TP1017 (UNUSED) */
regulator-name = "ldo2";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
evm_3v3_sd: fixedregulator-sd {
compatible = "regulator-fixed";
regulator-name = "evm_3v3_sd";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
enable-active-high;
gpio = <&pcf_gpio_21 5 GPIO_ACTIVE_HIGH>;
};
extcon_usb1: extcon_usb1 {
compatible = "linux,extcon-usb-gpio";
id-gpio = <&pcf_gpio_21 1 GPIO_ACTIVE_HIGH>;
};
extcon_usb2: extcon_usb2 {
compatible = "linux,extcon-usb-gpio";
id-gpio = <&pcf_gpio_21 2 GPIO_ACTIVE_HIGH>;
};
hdmi0: connector {
compatible = "hdmi-connector";
label = "hdmi";
type = "a";
port {
hdmi_connector_in: endpoint {
remote-endpoint = <&tpd12s015_out>;
};
};
};
tpd12s015: encoder {
compatible = "ti,tpd12s015";
pinctrl-names = "default";
pinctrl-0 = <&tpd12s015_pins>;
gpios = <&pcf_hdmi 4 GPIO_ACTIVE_HIGH>, /* P4, CT CP HPD */
<&pcf_hdmi 5 GPIO_ACTIVE_HIGH>, /* P5, LS OE */
<&gpio7 12 GPIO_ACTIVE_HIGH>; /* gpio7_12/sp1_cs2, HPD */
ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
tpd12s015_in: endpoint {
remote-endpoint = <&hdmi_out>;
};
};
port@1 {
reg = <1>;
tpd12s015_out: endpoint {
remote-endpoint = <&hdmi_connector_in>;
};
};
};
};
sound0: sound@0 {
compatible = "simple-audio-card";
simple-audio-card,name = "DRA7xx-EVM";
simple-audio-card,widgets =
"Headphone", "Headphone Jack",
"Line", "Line Out",
"Microphone", "Mic Jack",
"Line", "Line In";
simple-audio-card,routing =
"Headphone Jack", "HPLOUT",
"Headphone Jack", "HPROUT",
"Line Out", "LLOUT",
"Line Out", "RLOUT",
"MIC3L", "Mic Jack",
"MIC3R", "Mic Jack",
"Mic Jack", "Mic Bias",
"LINE1L", "Line In",
"LINE1R", "Line In";
simple-audio-card,format = "dsp_b";
simple-audio-card,bitclock-master = <&sound0_master>;
simple-audio-card,frame-master = <&sound0_master>;
simple-audio-card,bitclock-inversion;
sound0_master: simple-audio-card,cpu {
sound-dai = <&mcasp3>;
system-clock-frequency = <5644800>;
};
simple-audio-card,codec {
sound-dai = <&tlv320aic3106>;
clocks = <&atl_clkin2_ck>;
};
regulator-allow-bypass;
};
};
&dra7_pmx_core {
i2c1_pins: pinmux_i2c1_pins {
pinctrl-single,pins = <
DRA7XX_CORE_IOPAD(0x3800, PIN_INPUT | MUX_MODE0) /* i2c1_sda.i2c1_sda */
DRA7XX_CORE_IOPAD(0x3804, PIN_INPUT | MUX_MODE0) /* i2c1_scl.i2c1_scl */
>;
};
i2c5_pins: pinmux_i2c5_pins {
pinctrl-single,pins = <
DRA7XX_CORE_IOPAD(0x36b4, PIN_INPUT | MUX_MODE10) /* mcasp1_axr0.i2c5_sda */
DRA7XX_CORE_IOPAD(0x36b8, PIN_INPUT | MUX_MODE10) /* mcasp1_axr1.i2c5_scl */
>;
};
i2c5_pins: pinmux_i2c5_pins {
pinctrl-single,pins = <
DRA7XX_CORE_IOPAD(0x36b4, PIN_INPUT | MUX_MODE10) /* mcasp1_axr0.i2c5_sda */
DRA7XX_CORE_IOPAD(0x36b8, PIN_INPUT | MUX_MODE10) /* mcasp1_axr1.i2c5_scl */
>;
};
nand_default: nand_default {
pinctrl-single,pins = <
DRA7XX_CORE_IOPAD(0x3400, PIN_INPUT | MUX_MODE0) /* gpmc_ad0 */
DRA7XX_CORE_IOPAD(0x3404, PIN_INPUT | MUX_MODE0) /* gpmc_ad1 */
DRA7XX_CORE_IOPAD(0x3408, PIN_INPUT | MUX_MODE0) /* gpmc_ad2 */
DRA7XX_CORE_IOPAD(0x340c, PIN_INPUT | MUX_MODE0) /* gpmc_ad3 */
DRA7XX_CORE_IOPAD(0x3410, PIN_INPUT | MUX_MODE0) /* gpmc_ad4 */
DRA7XX_CORE_IOPAD(0x3414, PIN_INPUT | MUX_MODE0) /* gpmc_ad5 */
DRA7XX_CORE_IOPAD(0x3418, PIN_INPUT | MUX_MODE0) /* gpmc_ad6 */
DRA7XX_CORE_IOPAD(0x341c, PIN_INPUT | MUX_MODE0) /* gpmc_ad7 */
DRA7XX_CORE_IOPAD(0x3420, PIN_INPUT | MUX_MODE0) /* gpmc_ad8 */
DRA7XX_CORE_IOPAD(0x3424, PIN_INPUT | MUX_MODE0) /* gpmc_ad9 */
DRA7XX_CORE_IOPAD(0x3428, PIN_INPUT | MUX_MODE0) /* gpmc_ad10 */
DRA7XX_CORE_IOPAD(0x342c, PIN_INPUT | MUX_MODE0) /* gpmc_ad11 */
DRA7XX_CORE_IOPAD(0x3430, PIN_INPUT | MUX_MODE0) /* gpmc_ad12 */
DRA7XX_CORE_IOPAD(0x3434, PIN_INPUT | MUX_MODE0) /* gpmc_ad13 */
DRA7XX_CORE_IOPAD(0x3438, PIN_INPUT | MUX_MODE0) /* gpmc_ad14 */
DRA7XX_CORE_IOPAD(0x343c, PIN_INPUT | MUX_MODE0) /* gpmc_ad15 */
DRA7XX_CORE_IOPAD(0x34b4, PIN_OUTPUT | MUX_MODE0) /* gpmc_cs0 */
DRA7XX_CORE_IOPAD(0x34c4, PIN_OUTPUT | MUX_MODE0) /* gpmc_advn_ale */
DRA7XX_CORE_IOPAD(0x34cc, PIN_OUTPUT | MUX_MODE0) /* gpmc_wen */
DRA7XX_CORE_IOPAD(0x34c8, PIN_OUTPUT | MUX_MODE0) /* gpmc_oen_ren */
DRA7XX_CORE_IOPAD(0x34d0, PIN_OUTPUT | MUX_MODE0) /* gpmc_ben0 */
DRA7XX_CORE_IOPAD(0x34d8, PIN_INPUT | MUX_MODE0) /* gpmc_wait0 */
>;
};
usb1_pins: pinmux_usb1_pins {
pinctrl-single,pins = <
DRA7XX_CORE_IOPAD(0x3680, PIN_INPUT_SLEW | MUX_MODE0) /* usb1_drvvbus */
>;
};
usb2_pins: pinmux_usb2_pins {
pinctrl-single,pins = <
DRA7XX_CORE_IOPAD(0x3684, PIN_INPUT_SLEW | MUX_MODE0) /* usb2_drvvbus */
>;
};
tps65917_pins_default: tps65917_pins_default {
pinctrl-single,pins = <
DRA7XX_CORE_IOPAD(0x3824, PIN_INPUT_PULLUP | MUX_MODE1) /* wakeup3.sys_nirq1 */
>;
};
mmc1_pins_default: mmc1_pins_default {
pinctrl-single,pins = <
DRA7XX_CORE_IOPAD(0x376c, PIN_INPUT | MUX_MODE14) /* mmc1sdcd.gpio219 */
DRA7XX_CORE_IOPAD(0x3754, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_clk.clk */
DRA7XX_CORE_IOPAD(0x3758, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_cmd.cmd */
DRA7XX_CORE_IOPAD(0x375c, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat0.dat0 */
DRA7XX_CORE_IOPAD(0x3760, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat1.dat1 */
DRA7XX_CORE_IOPAD(0x3764, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat2.dat2 */
DRA7XX_CORE_IOPAD(0x3768, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat3.dat3 */
>;
};
mmc2_pins_default: mmc2_pins_default {
pinctrl-single,pins = <
DRA7XX_CORE_IOPAD(0x349c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a23.mmc2_clk */
DRA7XX_CORE_IOPAD(0x34b0, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_cs1.mmc2_cmd */
DRA7XX_CORE_IOPAD(0x34a0, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a24.mmc2_dat0 */
DRA7XX_CORE_IOPAD(0x34a4, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a25.mmc2_dat1 */
DRA7XX_CORE_IOPAD(0x34a8, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a26.mmc2_dat2 */
DRA7XX_CORE_IOPAD(0x34ac, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a27.mmc2_dat3 */
DRA7XX_CORE_IOPAD(0x348c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a19.mmc2_dat4 */
DRA7XX_CORE_IOPAD(0x3490, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a20.mmc2_dat5 */
DRA7XX_CORE_IOPAD(0x3494, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a21.mmc2_dat6 */
DRA7XX_CORE_IOPAD(0x3498, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a22.mmc2_dat7 */
>;
};
dcan1_pins_default: dcan1_pins_default {
pinctrl-single,pins = <
DRA7XX_CORE_IOPAD(0x37d0, PIN_OUTPUT_PULLUP | MUX_MODE0) /* dcan1_tx */
DRA7XX_CORE_IOPAD(0x3818, PULL_UP | MUX_MODE1) /* wakeup0.dcan1_rx */
>;
};
dcan1_pins_sleep: dcan1_pins_sleep {
pinctrl-single,pins = <
DRA7XX_CORE_IOPAD(0x37d0, MUX_MODE15 | PULL_UP) /* dcan1_tx.off */
DRA7XX_CORE_IOPAD(0x3818, MUX_MODE15 | PULL_UP) /* wakeup0.off */
>;
};
qspi1_pins: pinmux_qspi1_pins {
pinctrl-single,pins = <
DRA7XX_CORE_IOPAD(0x3474, PIN_OUTPUT | MUX_MODE1) /* gpmc_a13.qspi1_rtclk */
DRA7XX_CORE_IOPAD(0x3478, PIN_INPUT | MUX_MODE1) /* gpmc_a14.qspi1_d3 */
DRA7XX_CORE_IOPAD(0x347c, PIN_INPUT | MUX_MODE1) /* gpmc_a15.qspi1_d2 */
DRA7XX_CORE_IOPAD(0x3480, PIN_INPUT | MUX_MODE1) /* gpmc_a16.qspi1_d1 */
DRA7XX_CORE_IOPAD(0x3484, PIN_INPUT | MUX_MODE1) /* gpmc_a17.qspi1_d0 */
DRA7XX_CORE_IOPAD(0x3488, PIN_OUTPUT | MUX_MODE1) /* qpmc_a18.qspi1_sclk */
DRA7XX_CORE_IOPAD(0x34b8, PIN_OUTPUT | MUX_MODE1) /* gpmc_cs2.qspi1_cs0 */
>;
};
hdmi_pins: pinmux_hdmi_pins {
pinctrl-single,pins = <
DRA7XX_CORE_IOPAD(0x3808, PIN_INPUT | MUX_MODE1) /* i2c2_sda.hdmi1_ddc_scl */
DRA7XX_CORE_IOPAD(0x380c, PIN_INPUT | MUX_MODE1) /* i2c2_scl.hdmi1_ddc_sda */
>;
};
tpd12s015_pins: pinmux_tpd12s015_pins {
pinctrl-single,pins = <
DRA7XX_CORE_IOPAD(0x37b8, PIN_INPUT_PULLDOWN | MUX_MODE14) /* gpio7_12 HPD */
>;
};
atl_pins: pinmux_atl_pins {
pinctrl-single,pins = <
DRA7XX_CORE_IOPAD(0x3698, PIN_OUTPUT | MUX_MODE5) /* xref_clk1.atl_clk1 */
DRA7XX_CORE_IOPAD(0x369c, PIN_OUTPUT | MUX_MODE5) /* xref_clk2.atl_clk2 */
>;
};
mcasp3_pins: pinmux_mcasp3_pins {
pinctrl-single,pins = <
DRA7XX_CORE_IOPAD(0x3724, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mcasp3_aclkx */
DRA7XX_CORE_IOPAD(0x3728, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mcasp3_fsx */
DRA7XX_CORE_IOPAD(0x372c, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mcasp3_axr0 */
DRA7XX_CORE_IOPAD(0x3730, PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcasp3_axr1 */
>;
};
mcasp3_sleep_pins: pinmux_mcasp3_sleep_pins {
pinctrl-single,pins = <
DRA7XX_CORE_IOPAD(0x3724, PIN_INPUT_PULLDOWN | MUX_MODE15)
DRA7XX_CORE_IOPAD(0x3728, PIN_INPUT_PULLDOWN | MUX_MODE15)
DRA7XX_CORE_IOPAD(0x372c, PIN_INPUT_PULLDOWN | MUX_MODE15)
DRA7XX_CORE_IOPAD(0x3730, PIN_INPUT_PULLDOWN | MUX_MODE15)
>;
};
&hdmi {
vdda-supply = <&ldo3_reg>;
};
&i2c1 {
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&i2c1_pins>;
clock-frequency = <400000>;
tps65917: tps65917@58 {
compatible = "ti,tps65917";
reg = <0x58>;
pinctrl-names = "default";
pinctrl-0 = <&tps65917_pins_default>;
interrupts = <GIC_SPI 2 IRQ_TYPE_NONE>; /* IRQ_SYS_1N */
interrupt-controller;
#interrupt-cells = <2>;
ti,system-power-controller;
tps65917_pmic {
compatible = "ti,tps65917-pmic";
regulators {
smps1_reg: smps1 {
/* VDD_MPU */
regulator-name = "smps1";
regulator-min-microvolt = <850000>;
regulator-max-microvolt = <1250000>;
regulator-always-on;
regulator-boot-on;
};
smps2_reg: smps2 {
/* VDD_CORE */
regulator-name = "smps2";
regulator-min-microvolt = <850000>;
regulator-max-microvolt = <1060000>;
regulator-boot-on;
regulator-always-on;
};
smps3_reg: smps3 {
/* VDD_GPU IVA DSPEVE */
regulator-name = "smps3";
regulator-min-microvolt = <850000>;
regulator-max-microvolt = <1250000>;
regulator-boot-on;
regulator-always-on;
};
smps4_reg: smps4 {
/* VDDS1V8 */
regulator-name = "smps4";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
regulator-boot-on;
};
smps5_reg: smps5 {
/* VDD_DDR */
regulator-name = "smps5";
regulator-min-microvolt = <1350000>;
regulator-max-microvolt = <1350000>;
regulator-boot-on;
regulator-always-on;
};
ldo1_reg: ldo1 {
/* LDO1_OUT --> SDIO */
regulator-name = "ldo1";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
regulator-boot-on;
regulator-allow-bypass;
};
ldo2_reg: ldo2 {
/* LDO2_OUT --> TP1017 (UNUSED) */
regulator-name = "ldo2";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3300000>;
regulator-allow-bypass;
};
ldo3_reg: ldo3 {
/* VDDA_1V8_PHY */
regulator-name = "ldo3";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-boot-on;
regulator-always-on;
};
ldo5_reg: ldo5 {
/* VDDA_1V8_PLL */
regulator-name = "ldo5";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
regulator-boot-on;
};
ldo4_reg: ldo4 {
/* VDDA_3V_USB: VDDA_USBHS33 */
regulator-name = "ldo4";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-boot-on;
};
};
};
tps65917_power_button {
compatible = "ti,palmas-pwrbutton";
interrupt-parent = <&tps65917>;
interrupts = <1 IRQ_TYPE_NONE>;
wakeup-source;
ti,palmas-long-press-seconds = <6>;
};
};
pcf_gpio_21: gpio@21 {
compatible = "ti,pcf8575";
reg = <0x21>;
lines-initial-states = <0x1408>;
gpio-controller;
#gpio-cells = <2>;
interrupt-parent = <&gpio6>;
interrupts = <11 IRQ_TYPE_EDGE_FALLING>;
interrupt-controller;
#interrupt-cells = <2>;
};
tlv320aic3106: tlv320aic3106@19 {
#sound-dai-cells = <0>;
compatible = "ti,tlv320aic3106";
reg = <0x19>;
adc-settle-ms = <40>;
ai3x-micbias-vg = <1>; /* 2.0V */
status = "okay";
/* Regulators */
AVDD-supply = <&evm_3v3>;
IOVDD-supply = <&evm_3v3>;
DRVDD-supply = <&evm_3v3>;
DVDD-supply = <&aic_dvdd>;
};
};
&i2c5 {
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&i2c5_pins>;
clock-frequency = <400000>;
pcf_hdmi: pcf8575@26 {
compatible = "nxp,pcf8575";
reg = <0x26>;
gpio-controller;
#gpio-cells = <2>;
/*
* initial state is used here to keep the mdio interface
* selected on RU89 through SEL_VIN4_MUX_S0, VIN2_S1 and
* VIN2_S0 driven high otherwise Ethernet stops working
* VIN6_SEL_S0 is low, thus selecting McASP3 over VIN6
*/
lines-initial-states = <0x0f2b>;
p1 {
/* vin6_sel_s0: high: VIN6, low: audio */
gpio-hog;
gpios = <1 GPIO_ACTIVE_HIGH>;
output-low;
line-name = "vin6_sel_s0";
};
};
};
&uart1 {
status = "okay";
interrupts-extended = <&crossbar_mpu GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>,
<&dra7_pmx_core 0x3e0>;
};
&elm {
status = "okay";
};
&gpmc {
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&nand_default>;
ranges = <0 0 0x08000000 0x01000000>; /* minimum GPMC partition = 16MB */
nand@0,0 {
/* To use NAND, DIP switch SW5 must be set like so:
* SW5.1 (NAND_SELn) = ON (LOW)
* SW5.9 (GPMC_WPN) = OFF (HIGH)
*/
compatible = "ti,omap2-nand";
reg = <0 0 4>; /* device IO registers */
interrupt-parent = <&gpmc>;
interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
<1 IRQ_TYPE_NONE>; /* termcount */
ti,nand-ecc-opt = "bch8";
ti,elm-id = <&elm>;
nand-bus-width = <16>;
gpmc,device-width = <2>;
gpmc,sync-clk-ps = <0>;
gpmc,cs-on-ns = <0>;
gpmc,cs-rd-off-ns = <80>;
gpmc,cs-wr-off-ns = <80>;
gpmc,adv-on-ns = <0>;
gpmc,adv-rd-off-ns = <60>;
gpmc,adv-wr-off-ns = <60>;
gpmc,we-on-ns = <10>;
gpmc,we-off-ns = <50>;
gpmc,oe-on-ns = <4>;
gpmc,oe-off-ns = <40>;
gpmc,access-ns = <40>;
gpmc,wr-access-ns = <80>;
gpmc,rd-cycle-ns = <80>;
gpmc,wr-cycle-ns = <80>;
gpmc,bus-turnaround-ns = <0>;
gpmc,cycle2cycle-delay-ns = <0>;
gpmc,clk-activation-ns = <0>;
gpmc,wr-data-mux-bus-ns = <0>;
/* MTD partition table */
/* All SPL-* partitions are sized to minimal length
* which can be independently programmable. For
* NAND flash this is equal to size of erase-block */
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "NAND.SPL";
reg = <0x00000000 0x000020000>;
};
partition@1 {
label = "NAND.SPL.backup1";
reg = <0x00020000 0x00020000>;
};
partition@2 {
label = "NAND.SPL.backup2";
reg = <0x00040000 0x00020000>;
};
partition@3 {
label = "NAND.SPL.backup3";
reg = <0x00060000 0x00020000>;
};
partition@4 {
label = "NAND.u-boot-spl-os";
reg = <0x00080000 0x00040000>;
};
partition@5 {
label = "NAND.u-boot";
reg = <0x000c0000 0x00100000>;
};
partition@6 {
label = "NAND.u-boot-env";
reg = <0x001c0000 0x00020000>;
};
partition@7 {
label = "NAND.u-boot-env.backup1";
reg = <0x001e0000 0x00020000>;
};
partition@8 {
label = "NAND.kernel";
reg = <0x00200000 0x00800000>;
};
partition@9 {
label = "NAND.file-system";
reg = <0x00a00000 0x0f600000>;
};
};
};
&usb2_phy1 {
phy-supply = <&ldo4_reg>;
};
&usb2_phy2 {
phy-supply = <&ldo4_reg>;
};
&omap_dwc3_1 {
extcon = <&extcon_usb1>;
};
&omap_dwc3_2 {
extcon = <&extcon_usb2>;
};
&usb1 {
dr_mode = "peripheral";
pinctrl-names = "default";
pinctrl-0 = <&usb1_pins>;
};
&usb2 {
dr_mode = "host";
pinctrl-names = "default";
pinctrl-0 = <&usb2_pins>;
};
&mmc1 {
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&mmc1_pins_default>;
vmmc-supply = <&evm_3v3_sd>;
vmmc_aux-supply = <&ldo1_reg>;
bus-width = <4>;
/*
* SDCD signal is not being used here - using the fact that GPIO mode
* is a viable alternative
*/
cd-gpios = <&gpio6 27 GPIO_ACTIVE_LOW>;
max-frequency = <192000000>;
};
&mmc2 {
/* SW5-3 in ON position */
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&mmc2_pins_default>;
vmmc-supply = <&evm_3v3>;
bus-width = <8>;
ti,non-removable;
max-frequency = <192000000>;
};
&dra7_pmx_core {
cpsw_default: cpsw_default {
pinctrl-single,pins = <
/* Slave 2 */
DRA7XX_CORE_IOPAD(0x3598, PIN_OUTPUT | MUX_MODE3) /* vin2a_d12.rgmii1_txc */
DRA7XX_CORE_IOPAD(0x359c, PIN_OUTPUT | MUX_MODE3) /* vin2a_d13.rgmii1_tctl */
DRA7XX_CORE_IOPAD(0x35a0, PIN_OUTPUT | MUX_MODE3) /* vin2a_d14.rgmii1_td3 */
DRA7XX_CORE_IOPAD(0x35a4, PIN_OUTPUT | MUX_MODE3) /* vin2a_d15.rgmii1_td2 */
DRA7XX_CORE_IOPAD(0x35a8, PIN_OUTPUT | MUX_MODE3) /* vin2a_d16.rgmii1_td1 */
DRA7XX_CORE_IOPAD(0x35ac, PIN_OUTPUT | MUX_MODE3) /* vin2a_d17.rgmii1_td0 */
DRA7XX_CORE_IOPAD(0x35b0, PIN_INPUT | MUX_MODE3) /* vin2a_d18.rgmii1_rclk */
DRA7XX_CORE_IOPAD(0x35b4, PIN_INPUT | MUX_MODE3) /* vin2a_d19.rgmii1_rctl */
DRA7XX_CORE_IOPAD(0x35b8, PIN_INPUT | MUX_MODE3) /* vin2a_d20.rgmii1_rd3 */
DRA7XX_CORE_IOPAD(0x35bc, PIN_INPUT | MUX_MODE3) /* vin2a_d21.rgmii1_rd2 */
DRA7XX_CORE_IOPAD(0x35c0, PIN_INPUT | MUX_MODE3) /* vin2a_d22.rgmii1_rd1 */
DRA7XX_CORE_IOPAD(0x35c4, PIN_INPUT | MUX_MODE3) /* vin2a_d23.rgmii1_rd0 */
>;
};
cpsw_sleep: cpsw_sleep {
pinctrl-single,pins = <
/* Slave 2 */
DRA7XX_CORE_IOPAD(0x3598, MUX_MODE15)
DRA7XX_CORE_IOPAD(0x359c, MUX_MODE15)
DRA7XX_CORE_IOPAD(0x35a0, MUX_MODE15)
DRA7XX_CORE_IOPAD(0x35a4, MUX_MODE15)
DRA7XX_CORE_IOPAD(0x35a8, MUX_MODE15)
DRA7XX_CORE_IOPAD(0x35ac, MUX_MODE15)
DRA7XX_CORE_IOPAD(0x35b0, MUX_MODE15)
DRA7XX_CORE_IOPAD(0x35b4, MUX_MODE15)
DRA7XX_CORE_IOPAD(0x35b8, MUX_MODE15)
DRA7XX_CORE_IOPAD(0x35bc, MUX_MODE15)
DRA7XX_CORE_IOPAD(0x35c0, MUX_MODE15)
DRA7XX_CORE_IOPAD(0x35c4, MUX_MODE15)
>;
};
davinci_mdio_default: davinci_mdio_default {
pinctrl-single,pins = <
/* MDIO */
DRA7XX_CORE_IOPAD(0x363c, PIN_OUTPUT_PULLUP | MUX_MODE0) /* mdio_d.mdio_d */
DRA7XX_CORE_IOPAD(0x3640, PIN_INPUT_PULLUP | MUX_MODE0) /* mdio_clk.mdio_clk */
>;
};
davinci_mdio_sleep: davinci_mdio_sleep {
pinctrl-single,pins = <
DRA7XX_CORE_IOPAD(0x363c, MUX_MODE15)
DRA7XX_CORE_IOPAD(0x3640, MUX_MODE15)
>;
};
&pcf_gpio_21 {
interrupt-parent = <&gpio6>;
interrupts = <11 IRQ_TYPE_EDGE_FALLING>;
};
&mac {
status = "okay";
pinctrl-names = "default", "sleep";
pinctrl-0 = <&cpsw_default>;
pinctrl-1 = <&cpsw_sleep>;
slaves = <1>;
mode-gpios = <&pcf_gpio_21 4 GPIO_ACTIVE_HIGH>;
};
@ -697,158 +43,3 @@
phy_id = <&davinci_mdio>, <3>;
phy-mode = "rgmii";
};
&davinci_mdio {
pinctrl-names = "default", "sleep";
pinctrl-0 = <&davinci_mdio_default>;
pinctrl-1 = <&davinci_mdio_sleep>;
};
&dcan1 {
status = "ok";
pinctrl-names = "default", "sleep", "active";
pinctrl-0 = <&dcan1_pins_sleep>;
pinctrl-1 = <&dcan1_pins_sleep>;
pinctrl-2 = <&dcan1_pins_default>;
};
&qspi {
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&qspi1_pins>;
spi-max-frequency = <48000000>;
m25p80@0 {
compatible = "s25fl256s1";
spi-max-frequency = <48000000>;
reg = <0>;
spi-tx-bus-width = <1>;
spi-rx-bus-width = <4>;
spi-cpol;
spi-cpha;
#address-cells = <1>;
#size-cells = <1>;
/* MTD partition table.
* The ROM checks the first four physical blocks
* for a valid file to boot and the flash here is
* 64KiB block size.
*/
partition@0 {
label = "QSPI.SPL";
reg = <0x00000000 0x000010000>;
};
partition@1 {
label = "QSPI.SPL.backup1";
reg = <0x00010000 0x00010000>;
};
partition@2 {
label = "QSPI.SPL.backup2";
reg = <0x00020000 0x00010000>;
};
partition@3 {
label = "QSPI.SPL.backup3";
reg = <0x00030000 0x00010000>;
};
partition@4 {
label = "QSPI.u-boot";
reg = <0x00040000 0x00100000>;
};
partition@5 {
label = "QSPI.u-boot-spl-os";
reg = <0x00140000 0x00080000>;
};
partition@6 {
label = "QSPI.u-boot-env";
reg = <0x001c0000 0x00010000>;
};
partition@7 {
label = "QSPI.u-boot-env.backup1";
reg = <0x001d0000 0x0010000>;
};
partition@8 {
label = "QSPI.kernel";
reg = <0x001e0000 0x0800000>;
};
partition@9 {
label = "QSPI.file-system";
reg = <0x009e0000 0x01620000>;
};
};
};
&dss {
status = "ok";
vdda_video-supply = <&ldo5_reg>;
};
&hdmi {
status = "ok";
vdda-supply = <&ldo3_reg>;
pinctrl-names = "default";
pinctrl-0 = <&hdmi_pins>;
port {
hdmi_out: endpoint {
remote-endpoint = <&tpd12s015_in>;
};
};
};
&atl {
pinctrl-names = "default";
pinctrl-0 = <&atl_pins>;
assigned-clocks = <&abe_dpll_sys_clk_mux>,
<&atl_gfclk_mux>,
<&dpll_abe_ck>,
<&dpll_abe_m2x2_ck>,
<&atl_clkin2_ck>;
assigned-clock-parents = <&sys_clkin2>, <&dpll_abe_m2_ck>;
assigned-clock-rates = <0>, <0>, <180633600>, <361267200>, <5644800>;
status = "okay";
atl2 {
bws = <DRA7_ATL_WS_MCASP2_FSX>;
aws = <DRA7_ATL_WS_MCASP3_FSX>;
};
};
&mcasp3 {
#sound-dai-cells = <0>;
pinctrl-names = "default", "sleep";
pinctrl-0 = <&mcasp3_pins>;
pinctrl-1 = <&mcasp3_sleep_pins>;
assigned-clocks = <&mcasp3_ahclkx_mux>;
assigned-clock-parents = <&atl_clkin2_ck>;
status = "okay";
op-mode = <0>; /* MCASP_IIS_MODE */
tdm-slots = <2>;
/* 4 serializer */
serial-dir = < /* 0: INACTIVE, 1: TX, 2: RX */
1 2 0 0
>;
};
&mailbox5 {
status = "okay";
mbox_ipu1_ipc3x: mbox_ipu1_ipc3x {
status = "okay";
};
mbox_dsp1_ipc3x: mbox_dsp1_ipc3x {
status = "okay";
};
};
&mailbox6 {
status = "okay";
mbox_ipu2_ipc3x: mbox_ipu2_ipc3x {
status = "okay";
};
};

376
arch/arm/boot/dts/dra7xx-clocks.dtsi
View File

File diff suppressed because it is too large Load Diff

4
arch/arm/boot/dts/emev2-kzm9d.dts
View File

@ -105,8 +105,8 @@
&pfc {
uart1_pins: serial@e1030000 {
renesas,groups = "uart1_ctrl", "uart1_data";
renesas,function = "uart1";
groups = "uart1_ctrl", "uart1_data";
function = "uart1";
};
};

43
arch/arm/boot/dts/exynos3250-artik5-eval.dts Normal file
View File

@ -0,0 +1,43 @@
/*
* Samsung's Exynos3250 based ARTIK5 evaluation board device tree source
*
* Copyright (c) 2016 Samsung Electronics Co., Ltd.
* http://www.samsung.com
*
* Device tree source file for Samsung's ARTIK5 evaluation board
* which is based on Samsung Exynos3250 SoC.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
/dts-v1/;
#include "exynos3250-artik5.dtsi"
/ {
model = "Samsung ARTIK5 evaluation board";
compatible = "samsung,artik5-eval", "samsung,artik5",
"samsung,exynos3250", "samsung,exynos3";
};
&mshc_2 {
num-slots = <1>;
cap-sd-highspeed;
disable-wp;
vqmmc-supply = <&ldo3_reg>;
card-detect-delay = <200>;
clock-frequency = <100000000>;
clock-freq-min-max = <400000 100000000>;
samsung,dw-mshc-ciu-div = <1>;
samsung,dw-mshc-sdr-timing = <0 1>;
samsung,dw-mshc-ddr-timing = <1 2>;
pinctrl-names = "default";
pinctrl-0 = <&sd2_cmd &sd2_clk &sd2_cd &sd2_bus1 &sd2_bus4>;
bus-width = <4>;
status = "okay";
};
&serial_2 {
status = "okay";
};

Some files were not shown because too many files have changed in this diff Show More