drm/hisilicon: Add designware dsi encoder driver

Add DesignWare MIPI DSI Host Controller v1.02 encoder driver
for hi6220 SoC.

v9: Fix module compile error.
v8: None.
v7:
- A few regs define clean up.
v6:
- Change "pclk_dsi" to "pclk".
v5: None.
v4: None.
v3:
- Rename file name to dw_drm_dsi.c
- Make encoder type as DRM_MODE_ENCODER_DSI.
- A few cleanup.
v2:
- Remove abtraction layer.

Signed-off-by: Xinliang Liu <xinliang.liu@linaro.org>
Signed-off-by: Xinwei Kong <kong.kongxinwei@hisilicon.com>
Signed-off-by: Andy Green <andy.green@linaro.org>
This commit is contained in:
Xinliang Liu 2015-11-23 09:32:26 +08:00
parent 6b7a596548
commit f819b0d4a9
4 changed files with 869 additions and 0 deletions

View file

@ -7,3 +7,12 @@ config DRM_HISI_KIRIN
help
Choose this option if you have a hisilicon Kirin chipsets(hi6220).
If M is selected the module will be called kirin-drm.
config HISI_KIRIN_DW_DSI
tristate "HiSilicon Kirin specific extensions for Synopsys DW MIPI DSI"
depends on DRM_HISI_KIRIN
select DRM_MIPI_DSI
help
This selects support for HiSilicon Kirin SoC specific extensions for
the Synopsys DesignWare DSI driver. If you want to enable MIPI DSI on
hi6220 based SoC, you should selet this option.

View file

@ -2,3 +2,5 @@ kirin-drm-y := kirin_drm_drv.o \
kirin_drm_ade.o
obj-$(CONFIG_DRM_HISI_KIRIN) += kirin-drm.o
obj-$(CONFIG_HISI_KIRIN_DW_DSI) += dw_drm_dsi.o

View file

@ -0,0 +1,755 @@
/*
* DesignWare MIPI DSI Host Controller v1.02 driver
*
* Copyright (c) 2016 Linaro Limited.
* Copyright (c) 2014-2016 Hisilicon Limited.
*
* Author:
* Xinliang Liu <z.liuxinliang@hisilicon.com>
* Xinliang Liu <xinliang.liu@linaro.org>
* Xinwei Kong <kong.kongxinwei@hisilicon.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
*/
#include <linux/clk.h>
#include <linux/component.h>
#include <linux/of_graph.h>
#include <drm/drm_of.h>
#include <drm/drm_crtc_helper.h>
#include <drm/drm_mipi_dsi.h>
#include <drm/drm_encoder_slave.h>
#include <drm/drm_atomic_helper.h>
#include "dw_dsi_reg.h"
#define MAX_TX_ESC_CLK 10
#define ROUND(x, y) ((x) / (y) + \
((x) % (y) * 10 / (y) >= 5 ? 1 : 0))
#define PHY_REF_CLK_RATE 19200000
#define PHY_REF_CLK_PERIOD_PS (1000000000 / (PHY_REF_CLK_RATE / 1000))
#define encoder_to_dsi(encoder) \
container_of(encoder, struct dw_dsi, encoder)
#define host_to_dsi(host) \
container_of(host, struct dw_dsi, host)
struct mipi_phy_params {
u32 clk_t_lpx;
u32 clk_t_hs_prepare;
u32 clk_t_hs_zero;
u32 clk_t_hs_trial;
u32 clk_t_wakeup;
u32 data_t_lpx;
u32 data_t_hs_prepare;
u32 data_t_hs_zero;
u32 data_t_hs_trial;
u32 data_t_ta_go;
u32 data_t_ta_get;
u32 data_t_wakeup;
u32 hstx_ckg_sel;
u32 pll_fbd_div5f;
u32 pll_fbd_div1f;
u32 pll_fbd_2p;
u32 pll_enbwt;
u32 pll_fbd_p;
u32 pll_fbd_s;
u32 pll_pre_div1p;
u32 pll_pre_p;
u32 pll_vco_750M;
u32 pll_lpf_rs;
u32 pll_lpf_cs;
u32 clklp2hs_time;
u32 clkhs2lp_time;
u32 lp2hs_time;
u32 hs2lp_time;
u32 clk_to_data_delay;
u32 data_to_clk_delay;
u32 lane_byte_clk_kHz;
u32 clk_division;
};
struct dsi_hw_ctx {
void __iomem *base;
struct clk *pclk;
};
struct dw_dsi {
struct drm_encoder encoder;
struct drm_display_mode cur_mode;
struct dsi_hw_ctx *ctx;
struct mipi_phy_params phy;
u32 lanes;
enum mipi_dsi_pixel_format format;
unsigned long mode_flags;
bool enable;
};
struct dsi_data {
struct dw_dsi dsi;
struct dsi_hw_ctx ctx;
};
struct dsi_phy_range {
u32 min_range_kHz;
u32 max_range_kHz;
u32 pll_vco_750M;
u32 hstx_ckg_sel;
};
static const struct dsi_phy_range dphy_range_info[] = {
{ 46875, 62500, 1, 7 },
{ 62500, 93750, 0, 7 },
{ 93750, 125000, 1, 6 },
{ 125000, 187500, 0, 6 },
{ 187500, 250000, 1, 5 },
{ 250000, 375000, 0, 5 },
{ 375000, 500000, 1, 4 },
{ 500000, 750000, 0, 4 },
{ 750000, 1000000, 1, 0 },
{ 1000000, 1500000, 0, 0 }
};
static u32 dsi_calc_phy_rate(u32 req_kHz, struct mipi_phy_params *phy)
{
u32 ref_clk_ps = PHY_REF_CLK_PERIOD_PS;
u32 tmp_kHz = req_kHz;
u32 i = 0;
u32 q_pll = 1;
u32 m_pll = 0;
u32 n_pll = 0;
u32 r_pll = 1;
u32 m_n = 0;
u32 m_n_int = 0;
u32 f_kHz = 0;
u64 temp;
/*
* Find a rate >= req_kHz.
*/
do {
f_kHz = tmp_kHz;
for (i = 0; i < ARRAY_SIZE(dphy_range_info); i++)
if (f_kHz >= dphy_range_info[i].min_range_kHz &&
f_kHz <= dphy_range_info[i].max_range_kHz)
break;
if (i == ARRAY_SIZE(dphy_range_info)) {
DRM_ERROR("%dkHz out of range\n", f_kHz);
return 0;
}
phy->pll_vco_750M = dphy_range_info[i].pll_vco_750M;
phy->hstx_ckg_sel = dphy_range_info[i].hstx_ckg_sel;
if (phy->hstx_ckg_sel <= 7 &&
phy->hstx_ckg_sel >= 4)
q_pll = 0x10 >> (7 - phy->hstx_ckg_sel);
temp = f_kHz * (u64)q_pll * (u64)ref_clk_ps;
m_n_int = temp / (u64)1000000000;
m_n = (temp % (u64)1000000000) / (u64)100000000;
if (m_n_int % 2 == 0) {
if (m_n * 6 >= 50) {
n_pll = 2;
m_pll = (m_n_int + 1) * n_pll;
} else if (m_n * 6 >= 30) {
n_pll = 3;
m_pll = m_n_int * n_pll + 2;
} else {
n_pll = 1;
m_pll = m_n_int * n_pll;
}
} else {
if (m_n * 6 >= 50) {
n_pll = 1;
m_pll = (m_n_int + 1) * n_pll;
} else if (m_n * 6 >= 30) {
n_pll = 1;
m_pll = (m_n_int + 1) * n_pll;
} else if (m_n * 6 >= 10) {
n_pll = 3;
m_pll = m_n_int * n_pll + 1;
} else {
n_pll = 2;
m_pll = m_n_int * n_pll;
}
}
if (n_pll == 1) {
phy->pll_fbd_p = 0;
phy->pll_pre_div1p = 1;
} else {
phy->pll_fbd_p = n_pll;
phy->pll_pre_div1p = 0;
}
if (phy->pll_fbd_2p <= 7 && phy->pll_fbd_2p >= 4)
r_pll = 0x10 >> (7 - phy->pll_fbd_2p);
if (m_pll == 2) {
phy->pll_pre_p = 0;
phy->pll_fbd_s = 0;
phy->pll_fbd_div1f = 0;
phy->pll_fbd_div5f = 1;
} else if (m_pll >= 2 * 2 * r_pll && m_pll <= 2 * 4 * r_pll) {
phy->pll_pre_p = m_pll / (2 * r_pll);
phy->pll_fbd_s = 0;
phy->pll_fbd_div1f = 1;
phy->pll_fbd_div5f = 0;
} else if (m_pll >= 2 * 5 * r_pll && m_pll <= 2 * 150 * r_pll) {
if (((m_pll / (2 * r_pll)) % 2) == 0) {
phy->pll_pre_p =
(m_pll / (2 * r_pll)) / 2 - 1;
phy->pll_fbd_s =
(m_pll / (2 * r_pll)) % 2 + 2;
} else {
phy->pll_pre_p =
(m_pll / (2 * r_pll)) / 2;
phy->pll_fbd_s =
(m_pll / (2 * r_pll)) % 2;
}
phy->pll_fbd_div1f = 0;
phy->pll_fbd_div5f = 0;
} else {
phy->pll_pre_p = 0;
phy->pll_fbd_s = 0;
phy->pll_fbd_div1f = 0;
phy->pll_fbd_div5f = 1;
}
f_kHz = (u64)1000000000 * (u64)m_pll /
((u64)ref_clk_ps * (u64)n_pll * (u64)q_pll);
if (f_kHz >= req_kHz)
break;
tmp_kHz += 10;
} while (true);
return f_kHz;
}
static void dsi_get_phy_params(u32 phy_req_kHz,
struct mipi_phy_params *phy)
{
u32 ref_clk_ps = PHY_REF_CLK_PERIOD_PS;
u32 phy_rate_kHz;
u32 ui;
memset(phy, 0, sizeof(*phy));
phy_rate_kHz = dsi_calc_phy_rate(phy_req_kHz, phy);
if (!phy_rate_kHz)
return;
ui = 1000000 / phy_rate_kHz;
phy->clk_t_lpx = ROUND(50, 8 * ui);
phy->clk_t_hs_prepare = ROUND(133, 16 * ui) - 1;
phy->clk_t_hs_zero = ROUND(262, 8 * ui);
phy->clk_t_hs_trial = 2 * (ROUND(60, 8 * ui) - 1);
phy->clk_t_wakeup = ROUND(1000000, (ref_clk_ps / 1000) - 1);
if (phy->clk_t_wakeup > 0xff)
phy->clk_t_wakeup = 0xff;
phy->data_t_wakeup = phy->clk_t_wakeup;
phy->data_t_lpx = phy->clk_t_lpx;
phy->data_t_hs_prepare = ROUND(125 + 10 * ui, 16 * ui) - 1;
phy->data_t_hs_zero = ROUND(105 + 6 * ui, 8 * ui);
phy->data_t_hs_trial = 2 * (ROUND(60 + 4 * ui, 8 * ui) - 1);
phy->data_t_ta_go = 3;
phy->data_t_ta_get = 4;
phy->pll_enbwt = 1;
phy->clklp2hs_time = ROUND(407, 8 * ui) + 12;
phy->clkhs2lp_time = ROUND(105 + 12 * ui, 8 * ui);
phy->lp2hs_time = ROUND(240 + 12 * ui, 8 * ui) + 1;
phy->hs2lp_time = phy->clkhs2lp_time;
phy->clk_to_data_delay = 1 + phy->clklp2hs_time;
phy->data_to_clk_delay = ROUND(60 + 52 * ui, 8 * ui) +
phy->clkhs2lp_time;
phy->lane_byte_clk_kHz = phy_rate_kHz / 8;
phy->clk_division =
DIV_ROUND_UP(phy->lane_byte_clk_kHz, MAX_TX_ESC_CLK);
}
static u32 dsi_get_dpi_color_coding(enum mipi_dsi_pixel_format format)
{
u32 val;
/*
* TODO: only support RGB888 now, to support more
*/
switch (format) {
case MIPI_DSI_FMT_RGB888:
val = DSI_24BITS_1;
break;
default:
val = DSI_24BITS_1;
break;
}
return val;
}
/*
* dsi phy reg write function
*/
static void dsi_phy_tst_set(void __iomem *base, u32 reg, u32 val)
{
u32 reg_write = 0x10000 + reg;
/*
* latch reg first
*/
writel(reg_write, base + PHY_TST_CTRL1);
writel(0x02, base + PHY_TST_CTRL0);
writel(0x00, base + PHY_TST_CTRL0);
/*
* then latch value
*/
writel(val, base + PHY_TST_CTRL1);
writel(0x02, base + PHY_TST_CTRL0);
writel(0x00, base + PHY_TST_CTRL0);
}
static void dsi_set_phy_timer(void __iomem *base,
struct mipi_phy_params *phy,
u32 lanes)
{
u32 val;
/*
* Set lane value and phy stop wait time.
*/
val = (lanes - 1) | (PHY_STOP_WAIT_TIME << 8);
writel(val, base + PHY_IF_CFG);
/*
* Set phy clk division.
*/
val = readl(base + CLKMGR_CFG) | phy->clk_division;
writel(val, base + CLKMGR_CFG);
/*
* Set lp and hs switching params.
*/
dw_update_bits(base + PHY_TMR_CFG, 24, MASK(8), phy->hs2lp_time);
dw_update_bits(base + PHY_TMR_CFG, 16, MASK(8), phy->lp2hs_time);
dw_update_bits(base + PHY_TMR_LPCLK_CFG, 16, MASK(10),
phy->clkhs2lp_time);
dw_update_bits(base + PHY_TMR_LPCLK_CFG, 0, MASK(10),
phy->clklp2hs_time);
dw_update_bits(base + CLK_DATA_TMR_CFG, 8, MASK(8),
phy->data_to_clk_delay);
dw_update_bits(base + CLK_DATA_TMR_CFG, 0, MASK(8),
phy->clk_to_data_delay);
}
static void dsi_set_mipi_phy(void __iomem *base,
struct mipi_phy_params *phy,
u32 lanes)
{
u32 delay_count;
u32 val;
u32 i;
/* phy timer setting */
dsi_set_phy_timer(base, phy, lanes);
/*
* Reset to clean up phy tst params.
*/
writel(0, base + PHY_RSTZ);
writel(0, base + PHY_TST_CTRL0);
writel(1, base + PHY_TST_CTRL0);
writel(0, base + PHY_TST_CTRL0);
/*
* Clock lane timing control setting: TLPX, THS-PREPARE,
* THS-ZERO, THS-TRAIL, TWAKEUP.
*/
dsi_phy_tst_set(base, CLK_TLPX, phy->clk_t_lpx);
dsi_phy_tst_set(base, CLK_THS_PREPARE, phy->clk_t_hs_prepare);
dsi_phy_tst_set(base, CLK_THS_ZERO, phy->clk_t_hs_zero);
dsi_phy_tst_set(base, CLK_THS_TRAIL, phy->clk_t_hs_trial);
dsi_phy_tst_set(base, CLK_TWAKEUP, phy->clk_t_wakeup);
/*
* Data lane timing control setting: TLPX, THS-PREPARE,
* THS-ZERO, THS-TRAIL, TTA-GO, TTA-GET, TWAKEUP.
*/
for (i = 0; i < lanes; i++) {
dsi_phy_tst_set(base, DATA_TLPX(i), phy->data_t_lpx);
dsi_phy_tst_set(base, DATA_THS_PREPARE(i),
phy->data_t_hs_prepare);
dsi_phy_tst_set(base, DATA_THS_ZERO(i), phy->data_t_hs_zero);
dsi_phy_tst_set(base, DATA_THS_TRAIL(i), phy->data_t_hs_trial);
dsi_phy_tst_set(base, DATA_TTA_GO(i), phy->data_t_ta_go);
dsi_phy_tst_set(base, DATA_TTA_GET(i), phy->data_t_ta_get);
dsi_phy_tst_set(base, DATA_TWAKEUP(i), phy->data_t_wakeup);
}
/*
* physical configuration: I, pll I, pll II, pll III,
* pll IV, pll V.
*/
dsi_phy_tst_set(base, PHY_CFG_I, phy->hstx_ckg_sel);
val = (phy->pll_fbd_div5f << 5) + (phy->pll_fbd_div1f << 4) +
(phy->pll_fbd_2p << 1) + phy->pll_enbwt;
dsi_phy_tst_set(base, PHY_CFG_PLL_I, val);
dsi_phy_tst_set(base, PHY_CFG_PLL_II, phy->pll_fbd_p);
dsi_phy_tst_set(base, PHY_CFG_PLL_III, phy->pll_fbd_s);
val = (phy->pll_pre_div1p << 7) + phy->pll_pre_p;
dsi_phy_tst_set(base, PHY_CFG_PLL_IV, val);
val = (5 << 5) + (phy->pll_vco_750M << 4) + (phy->pll_lpf_rs << 2) +
phy->pll_lpf_cs;
dsi_phy_tst_set(base, PHY_CFG_PLL_V, val);
writel(PHY_ENABLECLK, base + PHY_RSTZ);
udelay(1);
writel(PHY_ENABLECLK | PHY_UNSHUTDOWNZ, base + PHY_RSTZ);
udelay(1);
writel(PHY_ENABLECLK | PHY_UNRSTZ | PHY_UNSHUTDOWNZ, base + PHY_RSTZ);
usleep_range(1000, 1500);
/*
* wait for phy's clock ready
*/
delay_count = 100;
while (delay_count--) {
val = readl(base + PHY_STATUS);
if ((BIT(0) | BIT(2)) & val)
break;
udelay(1);
}
if (!delay_count)
DRM_INFO("phylock and phystopstateclklane is not ready.\n");
}
static void dsi_set_mode_timing(void __iomem *base,
u32 lane_byte_clk_kHz,
struct drm_display_mode *mode,
enum mipi_dsi_pixel_format format)
{
u32 hfp, hbp, hsw, vfp, vbp, vsw;
u32 hline_time;
u32 hsa_time;
u32 hbp_time;
u32 pixel_clk_kHz;
int htot, vtot;
u32 val;
u64 tmp;
val = dsi_get_dpi_color_coding(format);
writel(val, base + DPI_COLOR_CODING);
val = (mode->flags & DRM_MODE_FLAG_NHSYNC ? 1 : 0) << 2;
val |= (mode->flags & DRM_MODE_FLAG_NVSYNC ? 1 : 0) << 1;
writel(val, base + DPI_CFG_POL);
/*
* The DSI IP accepts vertical timing using lines as normal,
* but horizontal timing is a mixture of pixel-clocks for the
* active region and byte-lane clocks for the blanking-related
* timings. hfp is specified as the total hline_time in byte-
* lane clocks minus hsa, hbp and active.
*/
pixel_clk_kHz = mode->clock;
htot = mode->htotal;
vtot = mode->vtotal;
hfp = mode->hsync_start - mode->hdisplay;
hbp = mode->htotal - mode->hsync_end;
hsw = mode->hsync_end - mode->hsync_start;
vfp = mode->vsync_start - mode->vdisplay;
vbp = mode->vtotal - mode->vsync_end;
vsw = mode->vsync_end - mode->vsync_start;
if (vsw > 15) {
DRM_DEBUG_DRIVER("vsw exceeded 15\n");
vsw = 15;
}
hsa_time = (hsw * lane_byte_clk_kHz) / pixel_clk_kHz;
hbp_time = (hbp * lane_byte_clk_kHz) / pixel_clk_kHz;
tmp = (u64)htot * (u64)lane_byte_clk_kHz;
hline_time = DIV_ROUND_UP(tmp, pixel_clk_kHz);
/* all specified in byte-lane clocks */
writel(hsa_time, base + VID_HSA_TIME);
writel(hbp_time, base + VID_HBP_TIME);
writel(hline_time, base + VID_HLINE_TIME);
writel(vsw, base + VID_VSA_LINES);
writel(vbp, base + VID_VBP_LINES);
writel(vfp, base + VID_VFP_LINES);
writel(mode->vdisplay, base + VID_VACTIVE_LINES);
writel(mode->hdisplay, base + VID_PKT_SIZE);
DRM_DEBUG_DRIVER("htot=%d, hfp=%d, hbp=%d, hsw=%d\n",
htot, hfp, hbp, hsw);
DRM_DEBUG_DRIVER("vtol=%d, vfp=%d, vbp=%d, vsw=%d\n",
vtot, vfp, vbp, vsw);
DRM_DEBUG_DRIVER("hsa_time=%d, hbp_time=%d, hline_time=%d\n",
hsa_time, hbp_time, hline_time);
}
static void dsi_set_video_mode(void __iomem *base, unsigned long flags)
{
u32 val;
u32 mode_mask = MIPI_DSI_MODE_VIDEO | MIPI_DSI_MODE_VIDEO_BURST |
MIPI_DSI_MODE_VIDEO_SYNC_PULSE;
u32 non_burst_sync_pulse = MIPI_DSI_MODE_VIDEO |
MIPI_DSI_MODE_VIDEO_SYNC_PULSE;
u32 non_burst_sync_event = MIPI_DSI_MODE_VIDEO;
/*
* choose video mode type
*/
if ((flags & mode_mask) == non_burst_sync_pulse)
val = DSI_NON_BURST_SYNC_PULSES;
else if ((flags & mode_mask) == non_burst_sync_event)
val = DSI_NON_BURST_SYNC_EVENTS;
else
val = DSI_BURST_SYNC_PULSES_1;
writel(val, base + VID_MODE_CFG);
writel(PHY_TXREQUESTCLKHS, base + LPCLK_CTRL);
writel(DSI_VIDEO_MODE, base + MODE_CFG);
}
static void dsi_mipi_init(struct dw_dsi *dsi)
{
struct dsi_hw_ctx *ctx = dsi->ctx;
struct mipi_phy_params *phy = &dsi->phy;
struct drm_display_mode *mode = &dsi->cur_mode;
u32 bpp = mipi_dsi_pixel_format_to_bpp(dsi->format);
void __iomem *base = ctx->base;
u32 dphy_req_kHz;
/*
* count phy params
*/
dphy_req_kHz = mode->clock * bpp / dsi->lanes;
dsi_get_phy_params(dphy_req_kHz, phy);
/* reset Core */
writel(RESET, base + PWR_UP);
/* set dsi phy params */
dsi_set_mipi_phy(base, phy, dsi->lanes);
/* set dsi mode timing */
dsi_set_mode_timing(base, phy->lane_byte_clk_kHz, mode, dsi->format);
/* set dsi video mode */
dsi_set_video_mode(base, dsi->mode_flags);
/* dsi wake up */
writel(POWERUP, base + PWR_UP);
DRM_DEBUG_DRIVER("lanes=%d, pixel_clk=%d kHz, bytes_freq=%d kHz\n",
dsi->lanes, mode->clock, phy->lane_byte_clk_kHz);
}
static void dsi_encoder_disable(struct drm_encoder *encoder)
{
struct dw_dsi *dsi = encoder_to_dsi(encoder);
struct dsi_hw_ctx *ctx = dsi->ctx;
void __iomem *base = ctx->base;
if (!dsi->enable)
return;
writel(0, base + PWR_UP);
writel(0, base + LPCLK_CTRL);
writel(0, base + PHY_RSTZ);
clk_disable_unprepare(ctx->pclk);
dsi->enable = false;
}
static void dsi_encoder_enable(struct drm_encoder *encoder)
{
struct dw_dsi *dsi = encoder_to_dsi(encoder);
struct dsi_hw_ctx *ctx = dsi->ctx;
int ret;
if (dsi->enable)
return;
ret = clk_prepare_enable(ctx->pclk);
if (ret) {
DRM_ERROR("fail to enable pclk: %d\n", ret);
return;
}
dsi_mipi_init(dsi);
dsi->enable = true;
}
static void dsi_encoder_mode_set(struct drm_encoder *encoder,
struct drm_display_mode *mode,
struct drm_display_mode *adj_mode)
{
struct dw_dsi *dsi = encoder_to_dsi(encoder);
drm_mode_copy(&dsi->cur_mode, adj_mode);
}
static int dsi_encoder_atomic_check(struct drm_encoder *encoder,
struct drm_crtc_state *crtc_state,
struct drm_connector_state *conn_state)
{
/* do nothing */
return 0;
}
static const struct drm_encoder_helper_funcs dw_encoder_helper_funcs = {
.atomic_check = dsi_encoder_atomic_check,
.mode_set = dsi_encoder_mode_set,
.enable = dsi_encoder_enable,
.disable = dsi_encoder_disable
};
static const struct drm_encoder_funcs dw_encoder_funcs = {
.destroy = drm_encoder_cleanup,
};
static int dw_drm_encoder_init(struct device *dev,
struct drm_device *drm_dev,
struct drm_encoder *encoder)
{
int ret;
u32 crtc_mask = drm_of_find_possible_crtcs(drm_dev, dev->of_node);
if (!crtc_mask) {
DRM_ERROR("failed to find crtc mask\n");
return -EINVAL;
}
encoder->possible_crtcs = crtc_mask;
ret = drm_encoder_init(drm_dev, encoder, &dw_encoder_funcs,
DRM_MODE_ENCODER_DSI, NULL);
if (ret) {
DRM_ERROR("failed to init dsi encoder\n");
return ret;
}
drm_encoder_helper_add(encoder, &dw_encoder_helper_funcs);
return 0;
}
static int dsi_bind(struct device *dev, struct device *master, void *data)
{
struct dsi_data *ddata = dev_get_drvdata(dev);
struct dw_dsi *dsi = &ddata->dsi;
struct drm_device *drm_dev = data;
int ret;
ret = dw_drm_encoder_init(dev, drm_dev, &dsi->encoder);
if (ret)
return ret;
return 0;
}
static void dsi_unbind(struct device *dev, struct device *master, void *data)
{
/* do nothing */
}
static const struct component_ops dsi_ops = {
.bind = dsi_bind,
.unbind = dsi_unbind,
};
static int dsi_parse_dt(struct platform_device *pdev, struct dw_dsi *dsi)
{
struct dsi_hw_ctx *ctx = dsi->ctx;
struct resource *res;
ctx->pclk = devm_clk_get(&pdev->dev, "pclk");
if (IS_ERR(ctx->pclk)) {
DRM_ERROR("failed to get pclk clock\n");
return PTR_ERR(ctx->pclk);
}
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
ctx->base = devm_ioremap_resource(&pdev->dev, res);
if (IS_ERR(ctx->base)) {
DRM_ERROR("failed to remap dsi io region\n");
return PTR_ERR(ctx->base);
}
return 0;
}
static int dsi_probe(struct platform_device *pdev)
{
struct dsi_data *data;
struct dw_dsi *dsi;
struct dsi_hw_ctx *ctx;
int ret;
data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL);
if (!data) {
DRM_ERROR("failed to allocate dsi data.\n");
return -ENOMEM;
}
dsi = &data->dsi;
ctx = &data->ctx;
dsi->ctx = ctx;
ret = dsi_parse_dt(pdev, dsi);
if (ret)
return ret;
platform_set_drvdata(pdev, data);
return component_add(&pdev->dev, &dsi_ops);
}
static int dsi_remove(struct platform_device *pdev)
{
component_del(&pdev->dev, &dsi_ops);
return 0;
}
static const struct of_device_id dsi_of_match[] = {
{.compatible = "hisilicon,hi6220-dsi"},
{ }
};
MODULE_DEVICE_TABLE(of, dsi_of_match);
static struct platform_driver dsi_driver = {
.probe = dsi_probe,
.remove = dsi_remove,
.driver = {
.name = "dw-dsi",
.of_match_table = dsi_of_match,
},
};
module_platform_driver(dsi_driver);
MODULE_AUTHOR("Xinliang Liu <xinliang.liu@linaro.org>");
MODULE_AUTHOR("Xinliang Liu <z.liuxinliang@hisilicon.com>");
MODULE_AUTHOR("Xinwei Kong <kong.kongxinwei@hisilicon.com>");
MODULE_DESCRIPTION("DesignWare MIPI DSI Host Controller v1.02 driver");
MODULE_LICENSE("GPL v2");

View file

@ -0,0 +1,103 @@
/*
* Copyright (c) 2016 Linaro Limited.
* Copyright (c) 2014-2016 Hisilicon Limited.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
*/
#ifndef __DW_DSI_REG_H__
#define __DW_DSI_REG_H__
#define MASK(x) (BIT(x) - 1)
/*
* regs
*/
#define PWR_UP 0x04 /* Core power-up */
#define RESET 0
#define POWERUP BIT(0)
#define PHY_IF_CFG 0xA4 /* D-PHY interface configuration */
#define CLKMGR_CFG 0x08 /* the internal clock dividers */
#define PHY_RSTZ 0xA0 /* D-PHY reset control */
#define PHY_ENABLECLK BIT(2)
#define PHY_UNRSTZ BIT(1)
#define PHY_UNSHUTDOWNZ BIT(0)
#define PHY_TST_CTRL0 0xB4 /* D-PHY test interface control 0 */
#define PHY_TST_CTRL1 0xB8 /* D-PHY test interface control 1 */
#define CLK_TLPX 0x10
#define CLK_THS_PREPARE 0x11
#define CLK_THS_ZERO 0x12
#define CLK_THS_TRAIL 0x13
#define CLK_TWAKEUP 0x14
#define DATA_TLPX(x) (0x20 + ((x) << 4))
#define DATA_THS_PREPARE(x) (0x21 + ((x) << 4))
#define DATA_THS_ZERO(x) (0x22 + ((x) << 4))
#define DATA_THS_TRAIL(x) (0x23 + ((x) << 4))
#define DATA_TTA_GO(x) (0x24 + ((x) << 4))
#define DATA_TTA_GET(x) (0x25 + ((x) << 4))
#define DATA_TWAKEUP(x) (0x26 + ((x) << 4))
#define PHY_CFG_I 0x60
#define PHY_CFG_PLL_I 0x63
#define PHY_CFG_PLL_II 0x64
#define PHY_CFG_PLL_III 0x65
#define PHY_CFG_PLL_IV 0x66
#define PHY_CFG_PLL_V 0x67
#define DPI_COLOR_CODING 0x10 /* DPI color coding */
#define DPI_CFG_POL 0x14 /* DPI polarity configuration */
#define VID_HSA_TIME 0x48 /* Horizontal Sync Active time */
#define VID_HBP_TIME 0x4C /* Horizontal Back Porch time */
#define VID_HLINE_TIME 0x50 /* Line time */
#define VID_VSA_LINES 0x54 /* Vertical Sync Active period */
#define VID_VBP_LINES 0x58 /* Vertical Back Porch period */
#define VID_VFP_LINES 0x5C /* Vertical Front Porch period */
#define VID_VACTIVE_LINES 0x60 /* Vertical resolution */
#define VID_PKT_SIZE 0x3C /* Video packet size */
#define VID_MODE_CFG 0x38 /* Video mode configuration */
#define PHY_TMR_CFG 0x9C /* Data lanes timing configuration */
#define BTA_TO_CNT 0x8C /* Response timeout definition */
#define PHY_TMR_LPCLK_CFG 0x98 /* clock lane timing configuration */
#define CLK_DATA_TMR_CFG 0xCC
#define LPCLK_CTRL 0x94 /* Low-power in clock lane */
#define PHY_TXREQUESTCLKHS BIT(0)
#define MODE_CFG 0x34 /* Video or Command mode selection */
#define PHY_STATUS 0xB0 /* D-PHY PPI status interface */
#define PHY_STOP_WAIT_TIME 0x30
/*
* regs relevant enum
*/
enum dpi_color_coding {
DSI_24BITS_1 = 5,
};
enum dsi_video_mode_type {
DSI_NON_BURST_SYNC_PULSES = 0,
DSI_NON_BURST_SYNC_EVENTS,
DSI_BURST_SYNC_PULSES_1,
DSI_BURST_SYNC_PULSES_2
};
enum dsi_work_mode {
DSI_VIDEO_MODE = 0,
DSI_COMMAND_MODE
};
/*
* Register Write/Read Helper functions
*/
static inline void dw_update_bits(void __iomem *addr, u32 bit_start,
u32 mask, u32 val)
{
u32 tmp, orig;
orig = readl(addr);
tmp = orig & ~(mask << bit_start);
tmp |= (val & mask) << bit_start;
writel(tmp, addr);
}
#endif /* __DW_DRM_DSI_H__ */