powerpc/85xx: add DOZE/NAP support for e500 core

The e500 core enter DOZE/NAP power-saving modes when the core go to
cpu_idle routine.

The power management default running mode is DOZE, If the user

echo 1 > /proc/sys/kernel/powersave-nap

the system will change to NAP running mode.

Signed-off-by: Dave Liu <daveliu@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
This commit is contained in:
Kumar Gala 2008-06-18 16:26:52 -05:00
parent 3dfa877367
commit fc4033b2f8
11 changed files with 152 additions and 14 deletions

View file

@ -38,6 +38,7 @@ obj-$(CONFIG_IBMVIO) += vio.o
obj-$(CONFIG_IBMEBUS) += ibmebus.o
obj-$(CONFIG_GENERIC_TBSYNC) += smp-tbsync.o
obj-$(CONFIG_CRASH_DUMP) += crash_dump.o
obj-$(CONFIG_E500) += idle_e500.o
obj-$(CONFIG_6xx) += idle_6xx.o l2cr_6xx.o cpu_setup_6xx.o
obj-$(CONFIG_TAU) += tau_6xx.o
obj-$(CONFIG_HIBERNATION) += swsusp.o suspend.o \

View file

@ -1491,7 +1491,6 @@ static struct cpu_spec __initdata cpu_specs[] = {
.pvr_mask = 0xffff0000,
.pvr_value = 0x80200000,
.cpu_name = "e500",
/* xxx - galak: add CPU_FTR_MAYBE_CAN_DOZE */
.cpu_features = CPU_FTRS_E500,
.cpu_user_features = COMMON_USER_BOOKE |
PPC_FEATURE_HAS_SPE_COMP |
@ -1508,7 +1507,6 @@ static struct cpu_spec __initdata cpu_specs[] = {
.pvr_mask = 0xffff0000,
.pvr_value = 0x80210000,
.cpu_name = "e500v2",
/* xxx - galak: add CPU_FTR_MAYBE_CAN_DOZE */
.cpu_features = CPU_FTRS_E500_2,
.cpu_user_features = COMMON_USER_BOOKE |
PPC_FEATURE_HAS_SPE_COMP |
@ -1526,7 +1524,6 @@ static struct cpu_spec __initdata cpu_specs[] = {
.pvr_mask = 0xffff0000,
.pvr_value = 0x80230000,
.cpu_name = "e500mc",
/* xxx - galak: add CPU_FTR_MAYBE_CAN_DOZE */
.cpu_features = CPU_FTRS_E500MC,
.cpu_user_features = COMMON_USER_BOOKE | PPC_FEATURE_HAS_FPU,
.icache_bsize = 64,

View file

@ -176,14 +176,14 @@ transfer_to_handler:
cmplw r1,r9 /* if r1 <= ksp_limit */
ble- stack_ovf /* then the kernel stack overflowed */
5:
#ifdef CONFIG_6xx
#if defined(CONFIG_6xx) || defined(CONFIG_E500)
rlwinm r9,r1,0,0,31-THREAD_SHIFT
tophys(r9,r9) /* check local flags */
lwz r12,TI_LOCAL_FLAGS(r9)
mtcrf 0x01,r12
bt- 31-TLF_NAPPING,4f
bt- 31-TLF_SLEEPING,7f
#endif /* CONFIG_6xx */
#endif /* CONFIG_6xx || CONFIG_E500 */
.globl transfer_to_handler_cont
transfer_to_handler_cont:
3:
@ -196,10 +196,10 @@ transfer_to_handler_cont:
SYNC
RFI /* jump to handler, enable MMU */
#ifdef CONFIG_6xx
#if defined (CONFIG_6xx) || defined(CONFIG_E500)
4: rlwinm r12,r12,0,~_TLF_NAPPING
stw r12,TI_LOCAL_FLAGS(r9)
b power_save_6xx_restore
b power_save_ppc32_restore
7: rlwinm r12,r12,0,~_TLF_SLEEPING
stw r12,TI_LOCAL_FLAGS(r9)

View file

@ -39,6 +39,7 @@
#include <asm/thread_info.h>
#include <asm/ppc_asm.h>
#include <asm/asm-offsets.h>
#include <asm/cache.h>
#include "head_booke.h"
/* As with the other PowerPC ports, it is expected that when code
@ -1071,6 +1072,52 @@ _GLOBAL(set_context)
isync /* Force context change */
blr
_GLOBAL(flush_dcache_L1)
mfspr r3,SPRN_L1CFG0
rlwinm r5,r3,9,3 /* Extract cache block size */
twlgti r5,1 /* Only 32 and 64 byte cache blocks
* are currently defined.
*/
li r4,32
subfic r6,r5,2 /* r6 = log2(1KiB / cache block size) -
* log2(number of ways)
*/
slw r5,r4,r5 /* r5 = cache block size */
rlwinm r7,r3,0,0xff /* Extract number of KiB in the cache */
mulli r7,r7,13 /* An 8-way cache will require 13
* loads per set.
*/
slw r7,r7,r6
/* save off HID0 and set DCFA */
mfspr r8,SPRN_HID0
ori r9,r8,HID0_DCFA@l
mtspr SPRN_HID0,r9
isync
lis r4,KERNELBASE@h
mtctr r7
1: lwz r3,0(r4) /* Load... */
add r4,r4,r5
bdnz 1b
msync
lis r4,KERNELBASE@h
mtctr r7
1: dcbf 0,r4 /* ...and flush. */
add r4,r4,r5
bdnz 1b
/* restore HID0 */
mtspr SPRN_HID0,r8
isync
blr
/*
* We put a few things here that have to be page-aligned. This stuff
* goes at the beginning of the data segment, which is page-aligned.

View file

@ -153,7 +153,7 @@ END_FTR_SECTION_IFSET(CPU_FTR_ALTIVEC)
* address of current. R11 points to the exception frame (physical
* address). We have to preserve r10.
*/
_GLOBAL(power_save_6xx_restore)
_GLOBAL(power_save_ppc32_restore)
lwz r9,_LINK(r11) /* interrupted in ppc6xx_idle: */
stw r9,_NIP(r11) /* make it do a blr */

View file

@ -0,0 +1,84 @@
/*
* Copyright (C) 2008 Freescale Semiconductor, Inc. All rights reserved.
* Dave Liu <daveliu@freescale.com>
* copy from idle_6xx.S and modify for e500 based processor,
* implement the power_save function in idle.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version
* 2 of the License, or (at your option) any later version.
*/
#include <linux/threads.h>
#include <asm/reg.h>
#include <asm/page.h>
#include <asm/cputable.h>
#include <asm/thread_info.h>
#include <asm/ppc_asm.h>
#include <asm/asm-offsets.h>
.text
_GLOBAL(e500_idle)
rlwinm r3,r1,0,0,31-THREAD_SHIFT /* current thread_info */
lwz r4,TI_LOCAL_FLAGS(r3) /* set napping bit */
ori r4,r4,_TLF_NAPPING /* so when we take an exception */
stw r4,TI_LOCAL_FLAGS(r3) /* it will return to our caller */
/* Check if we can nap or doze, put HID0 mask in r3 */
lis r3,0
BEGIN_FTR_SECTION
lis r3,HID0_DOZE@h
END_FTR_SECTION_IFSET(CPU_FTR_CAN_DOZE)
BEGIN_FTR_SECTION
/* Now check if user enabled NAP mode */
lis r4,powersave_nap@ha
lwz r4,powersave_nap@l(r4)
cmpwi 0,r4,0
beq 1f
stwu r1,-16(r1)
mflr r0
stw r0,20(r1)
bl flush_dcache_L1
lwz r0,20(r1)
addi r1,r1,16
mtlr r0
lis r3,HID0_NAP@h
END_FTR_SECTION_IFSET(CPU_FTR_CAN_NAP)
1:
/* Go to NAP or DOZE now */
mfspr r4,SPRN_HID0
rlwinm r4,r4,0,~(HID0_DOZE|HID0_NAP|HID0_SLEEP)
or r4,r4,r3
isync
mtspr SPRN_HID0,r4
isync
mfmsr r7
oris r7,r7,MSR_WE@h
ori r7,r7,MSR_EE
msync
mtmsr r7
isync
2: b 2b
/*
* Return from NAP/DOZE mode, restore some CPU specific registers,
* r2 containing physical address of current.
* r11 points to the exception frame (physical address).
* We have to preserve r10.
*/
_GLOBAL(power_save_ppc32_restore)
lwz r9,_LINK(r11) /* interrupted in e500_idle */
stw r9,_NIP(r11) /* make it do a blr */
#ifdef CONFIG_SMP
mfspr r12,SPRN_SPRG3
lwz r11,TI_CPU(r12) /* get cpu number * 4 */
slwi r11,r11,2
#else
li r11,0
#endif
b transfer_to_handler_cont

View file

@ -127,6 +127,11 @@ void __init machine_init(unsigned long dt_ptr, unsigned long phys)
ppc_md.power_save = ppc6xx_idle;
#endif
#ifdef CONFIG_E500
if (cpu_has_feature(CPU_FTR_CAN_DOZE) ||
cpu_has_feature(CPU_FTR_CAN_NAP))
ppc_md.power_save = e500_idle;
#endif
if (ppc_md.progress)
ppc_md.progress("id mach(): done", 0x200);
}

View file

@ -347,12 +347,13 @@ extern void do_feature_fixups(unsigned long value, void *fixup_start,
#define CPU_FTRS_E200 (CPU_FTR_USE_TB | CPU_FTR_SPE_COMP | \
CPU_FTR_NODSISRALIGN | CPU_FTR_COHERENT_ICACHE | \
CPU_FTR_UNIFIED_ID_CACHE)
#define CPU_FTRS_E500 (CPU_FTR_USE_TB | CPU_FTR_SPE_COMP | \
CPU_FTR_NODSISRALIGN)
#define CPU_FTRS_E500_2 (CPU_FTR_USE_TB | CPU_FTR_SPE_COMP | \
CPU_FTR_BIG_PHYS | CPU_FTR_NODSISRALIGN)
#define CPU_FTRS_E500MC (CPU_FTR_USE_TB | CPU_FTR_BIG_PHYS | \
#define CPU_FTRS_E500 (CPU_FTR_MAYBE_CAN_DOZE | CPU_FTR_USE_TB | \
CPU_FTR_SPE_COMP | CPU_FTR_MAYBE_CAN_NAP | CPU_FTR_NODSISRALIGN)
#define CPU_FTRS_E500_2 (CPU_FTR_MAYBE_CAN_DOZE | CPU_FTR_USE_TB | \
CPU_FTR_SPE_COMP | CPU_FTR_MAYBE_CAN_NAP | CPU_FTR_BIG_PHYS | \
CPU_FTR_NODSISRALIGN)
#define CPU_FTRS_E500MC (CPU_FTR_MAYBE_CAN_DOZE | CPU_FTR_USE_TB | \
CPU_FTR_MAYBE_CAN_NAP | CPU_FTR_BIG_PHYS | CPU_FTR_NODSISRALIGN)
#define CPU_FTRS_GENERIC_32 (CPU_FTR_COMMON | CPU_FTR_NODSISRALIGN)
/* 64-bit CPUs */

View file

@ -262,6 +262,7 @@ struct machdep_calls {
#endif
};
extern void e500_idle(void);
extern void power4_idle(void);
extern void power4_cpu_offline_powersave(void);
extern void ppc6xx_idle(void);

View file

@ -240,7 +240,7 @@
#define HID0_DAPUEN (1<<8) /* Debug APU enable */
#define HID0_SGE (1<<7) /* Store Gathering Enable */
#define HID0_SIED (1<<7) /* Serial Instr. Execution [Disable] */
#define HID0_DFCA (1<<6) /* Data Cache Flush Assist */
#define HID0_DCFA (1<<6) /* Data Cache Flush Assist */
#define HID0_LRSTK (1<<4) /* Link register stack - 745x */
#define HID0_BTIC (1<<5) /* Branch Target Instr Cache Enable */
#define HID0_ABE (1<<3) /* Address Broadcast Enable */

View file

@ -61,6 +61,8 @@
#define SPRN_SPEFSCR 0x200 /* SPE & Embedded FP Status & Control */
#define SPRN_BBEAR 0x201 /* Branch Buffer Entry Address Register */
#define SPRN_BBTAR 0x202 /* Branch Buffer Target Address Register */
#define SPRN_L1CFG0 0x203 /* L1 Cache Configure Register 0 */
#define SPRN_L1CFG1 0x204 /* L1 Cache Configure Register 1 */
#define SPRN_ATB 0x20E /* Alternate Time Base */
#define SPRN_ATBL 0x20E /* Alternate Time Base Lower */
#define SPRN_ATBU 0x20F /* Alternate Time Base Upper */