mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git
synced 2024-09-12 05:48:40 +00:00
arm64: dts: marvell: Add support for Marvell CN9131-DB
Extend the support of the CN9130 by adding an external CP115. The last number indicates how many external CP115 are used. New available interfaces: * CP1 CRYPTO-0 (disabled) * CP1 ETH-0 (SFI, problem with the SFP cage, disabled) * CP1 GPIO-1 * CP1 GPIO-2 * CP1 I2C-0 * CP1 PCIe-0 x2 * CP1 SPI-1 * CP1 SATA-0-1 * CP1 USB3-1 Signed-off-by: Grzegorz Jaszczyk <jaz@semihalf.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
This commit is contained in:
parent
8aeca97bd4
commit
fe5e610f16
2 changed files with 203 additions and 0 deletions
|
@ -11,3 +11,4 @@ dtb-$(CONFIG_ARCH_MVEBU) += armada-8040-mcbin.dtb
|
|||
dtb-$(CONFIG_ARCH_MVEBU) += armada-8040-mcbin-singleshot.dtb
|
||||
dtb-$(CONFIG_ARCH_MVEBU) += armada-8080-db.dtb
|
||||
dtb-$(CONFIG_ARCH_MVEBU) += cn9130-db.dtb
|
||||
dtb-$(CONFIG_ARCH_MVEBU) += cn9131-db.dtb
|
||||
|
|
202
arch/arm64/boot/dts/marvell/cn9131-db.dts
Normal file
202
arch/arm64/boot/dts/marvell/cn9131-db.dts
Normal file
|
@ -0,0 +1,202 @@
|
|||
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
||||
/*
|
||||
* Copyright (C) 2019 Marvell International Ltd.
|
||||
*
|
||||
* Device tree for the CN9131-DB board.
|
||||
*/
|
||||
|
||||
#include "cn9130-db.dts"
|
||||
|
||||
/ {
|
||||
model = "Marvell Armada CN9131-DB";
|
||||
compatible = "marvell,cn9131", "marvell,cn9130",
|
||||
"marvell,armada-ap807-quad", "marvell,armada-ap807";
|
||||
|
||||
aliases {
|
||||
gpio3 = &cp1_gpio1;
|
||||
gpio4 = &cp1_gpio2;
|
||||
ethernet3 = &cp1_eth0;
|
||||
ethernet4 = &cp1_eth1;
|
||||
};
|
||||
|
||||
cp1_reg_usb3_vbus0: cp1_usb3_vbus@0 {
|
||||
compatible = "regulator-fixed";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&cp1_xhci0_vbus_pins>;
|
||||
regulator-name = "cp1-xhci0-vbus";
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
enable-active-high;
|
||||
gpio = <&cp1_gpio1 3 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
cp1_usb3_0_phy0: cp1_usb3_phy0 {
|
||||
compatible = "usb-nop-xceiv";
|
||||
vcc-supply = <&cp1_reg_usb3_vbus0>;
|
||||
};
|
||||
|
||||
cp1_sfp_eth1: sfp-eth1 {
|
||||
compatible = "sff,sfp";
|
||||
i2c-bus = <&cp1_i2c0>;
|
||||
los-gpio = <&cp1_gpio1 11 GPIO_ACTIVE_HIGH>;
|
||||
mod-def0-gpio = <&cp1_gpio1 10 GPIO_ACTIVE_LOW>;
|
||||
tx-disable-gpio = <&cp1_gpio1 9 GPIO_ACTIVE_HIGH>;
|
||||
tx-fault-gpio = <&cp1_gpio1 8 GPIO_ACTIVE_HIGH>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&cp1_sfp_pins>;
|
||||
/*
|
||||
* SFP cages are unconnected on early PCBs because of an the I2C
|
||||
* lanes not being connected. Prevent the port for being
|
||||
* unusable by disabling the SFP node.
|
||||
*/
|
||||
status = "disabled";
|
||||
};
|
||||
};
|
||||
|
||||
/*
|
||||
* Instantiate the first slave CP115
|
||||
*/
|
||||
|
||||
#define CP11X_NAME cp1
|
||||
#define CP11X_BASE f4000000
|
||||
#define CP11X_PCIEx_MEM_BASE(iface) (0xe2000000 + (iface * 0x1000000))
|
||||
#define CP11X_PCIEx_MEM_SIZE(iface) 0xf00000
|
||||
#define CP11X_PCIE0_BASE f4600000
|
||||
#define CP11X_PCIE1_BASE f4620000
|
||||
#define CP11X_PCIE2_BASE f4640000
|
||||
|
||||
#include "armada-cp115.dtsi"
|
||||
|
||||
#undef CP11X_NAME
|
||||
#undef CP11X_BASE
|
||||
#undef CP11X_PCIEx_MEM_BASE
|
||||
#undef CP11X_PCIEx_MEM_SIZE
|
||||
#undef CP11X_PCIE0_BASE
|
||||
#undef CP11X_PCIE1_BASE
|
||||
#undef CP11X_PCIE2_BASE
|
||||
|
||||
&cp1_crypto {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
&cp1_ethernet {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
/* CON50 */
|
||||
&cp1_eth0 {
|
||||
status = "disabled";
|
||||
phy-mode = "10gbase-kr";
|
||||
/* Generic PHY, providing serdes lanes */
|
||||
phys = <&cp1_comphy4 0>;
|
||||
managed = "in-band-status";
|
||||
sfp = <&cp1_sfp_eth1>;
|
||||
};
|
||||
|
||||
&cp1_gpio1 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&cp1_gpio2 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&cp1_i2c0 {
|
||||
status = "okay";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&cp1_i2c0_pins>;
|
||||
clock-frequency = <100000>;
|
||||
};
|
||||
|
||||
/* CON40 */
|
||||
&cp1_pcie0 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&cp1_pcie_reset_pins>;
|
||||
num-lanes = <2>;
|
||||
num-viewport = <8>;
|
||||
marvell,reset-gpio = <&cp1_gpio1 0 GPIO_ACTIVE_HIGH>;
|
||||
status = "okay";
|
||||
/* Generic PHY, providing serdes lanes */
|
||||
phys = <&cp1_comphy0 0
|
||||
&cp1_comphy1 0>;
|
||||
};
|
||||
|
||||
&cp1_sata0 {
|
||||
status = "okay";
|
||||
|
||||
/* CON32 */
|
||||
sata-port@1 {
|
||||
/* Generic PHY, providing serdes lanes */
|
||||
phys = <&cp1_comphy5 1>;
|
||||
};
|
||||
};
|
||||
|
||||
/* U24 */
|
||||
&cp1_spi1 {
|
||||
status = "okay";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&cp1_spi0_pins>;
|
||||
reg = <0x700680 0x50>;
|
||||
|
||||
spi-flash@0 {
|
||||
#address-cells = <0x1>;
|
||||
#size-cells = <0x1>;
|
||||
compatible = "jedec,spi-nor";
|
||||
reg = <0x0>;
|
||||
/* On-board MUX does not allow higher frequencies */
|
||||
spi-max-frequency = <40000000>;
|
||||
|
||||
partitions {
|
||||
compatible = "fixed-partitions";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
partition@0 {
|
||||
label = "U-Boot-1";
|
||||
reg = <0x0 0x200000>;
|
||||
};
|
||||
|
||||
partition@400000 {
|
||||
label = "Filesystem-1";
|
||||
reg = <0x200000 0xe00000>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
};
|
||||
|
||||
&cp1_syscon0 {
|
||||
cp1_pinctrl: pinctrl {
|
||||
compatible = "marvell,cp115-standalone-pinctrl";
|
||||
|
||||
cp1_i2c0_pins: cp1-i2c-pins-0 {
|
||||
marvell,pins = "mpp37", "mpp38";
|
||||
marvell,function = "i2c0";
|
||||
};
|
||||
cp1_spi0_pins: cp1-spi-pins-0 {
|
||||
marvell,pins = "mpp13", "mpp14", "mpp15", "mpp16";
|
||||
marvell,function = "spi1";
|
||||
};
|
||||
cp1_xhci0_vbus_pins: cp1-xhci0-vbus-pins {
|
||||
marvell,pins = "mpp3";
|
||||
marvell,function = "gpio";
|
||||
};
|
||||
cp1_sfp_pins: sfp-pins {
|
||||
marvell,pins = "mpp8", "mpp9", "mpp10", "mpp11";
|
||||
marvell,function = "gpio";
|
||||
};
|
||||
cp1_pcie_reset_pins: cp1-pcie-reset-pins {
|
||||
marvell,pins = "mpp0";
|
||||
marvell,function = "gpio";
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
/* CON58 */
|
||||
&cp1_usb3_1 {
|
||||
status = "okay";
|
||||
usb-phy = <&cp1_usb3_0_phy0>;
|
||||
/* Generic PHY, providing serdes lanes */
|
||||
phys = <&cp1_comphy3 1>;
|
||||
phy-names = "usb";
|
||||
};
|
Loading…
Reference in a new issue