iio: accel: bma400: Add triggered buffer support
Added trigger buffer support to read continuous acceleration and temperature data from device with data ready interrupt which is mapped to INT1 pin. Signed-off-by: Jagath Jog J <jagathjog1996@gmail.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Link: https://lore.kernel.org/r/20220505133021.22362-5-jagathjog1996@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
This commit is contained in:
Jagath Jog J
Jonathan Cameron
parent
12c99f859f
commit
ffe0ab6a96
|
|
@ -204,6 +204,8 @@ config BMA220
|
|||
config BMA400
|
||||
tristate "Bosch BMA400 3-Axis Accelerometer Driver"
|
||||
select REGMAP
|
||||
select IIO_BUFFER
|
||||
select IIO_TRIGGERED_BUFFER
|
||||
select BMA400_I2C if I2C
|
||||
select BMA400_SPI if SPI
|
||||
help
|
||||
|
|
|
|||
|
|
@ -62,6 +62,13 @@
|
|||
#define BMA400_ACC_CONFIG2_REG 0x1b
|
||||
#define BMA400_CMD_REG 0x7e
|
||||
|
||||
/* Interrupt registers */
|
||||
#define BMA400_INT_CONFIG0_REG 0x1f
|
||||
#define BMA400_INT_CONFIG1_REG 0x20
|
||||
#define BMA400_INT1_MAP_REG 0x21
|
||||
#define BMA400_INT_IO_CTRL_REG 0x24
|
||||
#define BMA400_INT_DRDY_MSK BIT(7)
|
||||
|
||||
/* Chip ID of BMA 400 devices found in the chip ID register. */
|
||||
#define BMA400_ID_REG_VAL 0x90
|
||||
|
||||
|
|
@ -111,6 +118,7 @@
|
|||
|
||||
extern const struct regmap_config bma400_regmap_config;
|
||||
|
||||
int bma400_probe(struct device *dev, struct regmap *regmap, const char *name);
|
||||
int bma400_probe(struct device *dev, struct regmap *regmap, int irq,
|
||||
const char *name);
|
||||
|
||||
#endif
|
||||
|
|
|
|||
|
|
@ -11,6 +11,7 @@
|
|||
* - Create channel for sensor time
|
||||
*/
|
||||
|
||||
#include <linux/bitfield.h>
|
||||
#include <linux/bitops.h>
|
||||
#include <linux/device.h>
|
||||
#include <linux/kernel.h>
|
||||
|
|
@ -20,6 +21,10 @@
|
|||
#include <linux/regulator/consumer.h>
|
||||
|
||||
#include <linux/iio/iio.h>
|
||||
#include <linux/iio/buffer.h>
|
||||
#include <linux/iio/trigger.h>
|
||||
#include <linux/iio/trigger_consumer.h>
|
||||
#include <linux/iio/triggered_buffer.h>
|
||||
|
||||
#include "bma400.h"
|
||||
|
||||
|
|
@ -46,6 +51,13 @@ enum bma400_power_mode {
|
|||
POWER_MODE_INVALID = 0x03,
|
||||
};
|
||||
|
||||
enum bma400_scan {
|
||||
BMA400_ACCL_X,
|
||||
BMA400_ACCL_Y,
|
||||
BMA400_ACCL_Z,
|
||||
BMA400_TEMP,
|
||||
};
|
||||
|
||||
struct bma400_sample_freq {
|
||||
int hz;
|
||||
int uhz;
|
||||
|
|
@ -61,6 +73,14 @@ struct bma400_data {
|
|||
struct bma400_sample_freq sample_freq;
|
||||
int oversampling_ratio;
|
||||
int scale;
|
||||
struct iio_trigger *trig;
|
||||
/* Correct time stamp alignment */
|
||||
struct {
|
||||
__le16 buff[3];
|
||||
u8 temperature;
|
||||
s64 ts __aligned(8);
|
||||
} buffer __aligned(IIO_ALIGN);
|
||||
__le16 status;
|
||||
};
|
||||
|
||||
static bool bma400_is_writable_reg(struct device *dev, unsigned int reg)
|
||||
|
|
@ -152,7 +172,7 @@ static const struct iio_chan_spec_ext_info bma400_ext_info[] = {
|
|||
{ }
|
||||
};
|
||||
|
||||
#define BMA400_ACC_CHANNEL(_axis) { \
|
||||
#define BMA400_ACC_CHANNEL(_index, _axis) { \
|
||||
.type = IIO_ACCEL, \
|
||||
.modified = 1, \
|
||||
.channel2 = IIO_MOD_##_axis, \
|
||||
|
|
@ -164,17 +184,32 @@ static const struct iio_chan_spec_ext_info bma400_ext_info[] = {
|
|||
BIT(IIO_CHAN_INFO_SCALE) | \
|
||||
BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO), \
|
||||
.ext_info = bma400_ext_info, \
|
||||
.scan_index = _index, \
|
||||
.scan_type = { \
|
||||
.sign = 's', \
|
||||
.realbits = 12, \
|
||||
.storagebits = 16, \
|
||||
.endianness = IIO_LE, \
|
||||
}, \
|
||||
}
|
||||
|
||||
static const struct iio_chan_spec bma400_channels[] = {
|
||||
BMA400_ACC_CHANNEL(X),
|
||||
BMA400_ACC_CHANNEL(Y),
|
||||
BMA400_ACC_CHANNEL(Z),
|
||||
BMA400_ACC_CHANNEL(0, X),
|
||||
BMA400_ACC_CHANNEL(1, Y),
|
||||
BMA400_ACC_CHANNEL(2, Z),
|
||||
{
|
||||
.type = IIO_TEMP,
|
||||
.info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED),
|
||||
.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SAMP_FREQ),
|
||||
.scan_index = 3,
|
||||
.scan_type = {
|
||||
.sign = 's',
|
||||
.realbits = 8,
|
||||
.storagebits = 8,
|
||||
.endianness = IIO_LE,
|
||||
},
|
||||
},
|
||||
IIO_CHAN_SOFT_TIMESTAMP(4),
|
||||
};
|
||||
|
||||
static int bma400_get_temp_reg(struct bma400_data *data, int *val, int *val2)
|
||||
|
|
@ -659,6 +694,10 @@ static int bma400_init(struct bma400_data *data)
|
|||
if (ret)
|
||||
return ret;
|
||||
|
||||
/* Configure INT1 pin to open drain */
|
||||
ret = regmap_write(data->regmap, BMA400_INT_IO_CTRL_REG, 0x06);
|
||||
if (ret)
|
||||
return ret;
|
||||
/*
|
||||
* Once the interrupt engine is supported we might use the
|
||||
* data_src_reg, but for now ensure this is set to the
|
||||
|
|
@ -807,6 +846,31 @@ static int bma400_write_raw_get_fmt(struct iio_dev *indio_dev,
|
|||
}
|
||||
}
|
||||
|
||||
static int bma400_data_rdy_trigger_set_state(struct iio_trigger *trig,
|
||||
bool state)
|
||||
{
|
||||
struct iio_dev *indio_dev = iio_trigger_get_drvdata(trig);
|
||||
struct bma400_data *data = iio_priv(indio_dev);
|
||||
int ret;
|
||||
|
||||
ret = regmap_update_bits(data->regmap, BMA400_INT_CONFIG0_REG,
|
||||
BMA400_INT_DRDY_MSK,
|
||||
FIELD_PREP(BMA400_INT_DRDY_MSK, state));
|
||||
if (ret)
|
||||
return ret;
|
||||
|
||||
return regmap_update_bits(data->regmap, BMA400_INT1_MAP_REG,
|
||||
BMA400_INT_DRDY_MSK,
|
||||
FIELD_PREP(BMA400_INT_DRDY_MSK, state));
|
||||
}
|
||||
|
||||
static const unsigned long bma400_avail_scan_masks[] = {
|
||||
BIT(BMA400_ACCL_X) | BIT(BMA400_ACCL_Y) | BIT(BMA400_ACCL_Z),
|
||||
BIT(BMA400_ACCL_X) | BIT(BMA400_ACCL_Y) | BIT(BMA400_ACCL_Z)
|
||||
| BIT(BMA400_TEMP),
|
||||
0
|
||||
};
|
||||
|
||||
static const struct iio_info bma400_info = {
|
||||
.read_raw = bma400_read_raw,
|
||||
.read_avail = bma400_read_avail,
|
||||
|
|
@ -814,7 +878,78 @@ static const struct iio_info bma400_info = {
|
|||
.write_raw_get_fmt = bma400_write_raw_get_fmt,
|
||||
};
|
||||
|
||||
int bma400_probe(struct device *dev, struct regmap *regmap, const char *name)
|
||||
static const struct iio_trigger_ops bma400_trigger_ops = {
|
||||
.set_trigger_state = &bma400_data_rdy_trigger_set_state,
|
||||
.validate_device = &iio_trigger_validate_own_device,
|
||||
};
|
||||
|
||||
static irqreturn_t bma400_trigger_handler(int irq, void *p)
|
||||
{
|
||||
struct iio_poll_func *pf = p;
|
||||
struct iio_dev *indio_dev = pf->indio_dev;
|
||||
struct bma400_data *data = iio_priv(indio_dev);
|
||||
int ret, temp;
|
||||
|
||||
/* Lock to protect the data->buffer */
|
||||
mutex_lock(&data->mutex);
|
||||
|
||||
/* bulk read six registers, with the base being the LSB register */
|
||||
ret = regmap_bulk_read(data->regmap, BMA400_X_AXIS_LSB_REG,
|
||||
&data->buffer.buff, sizeof(data->buffer.buff));
|
||||
if (ret)
|
||||
goto unlock_err;
|
||||
|
||||
if (test_bit(BMA400_TEMP, indio_dev->active_scan_mask)) {
|
||||
ret = regmap_read(data->regmap, BMA400_TEMP_DATA_REG, &temp);
|
||||
if (ret)
|
||||
goto unlock_err;
|
||||
|
||||
data->buffer.temperature = temp;
|
||||
}
|
||||
|
||||
iio_push_to_buffers_with_timestamp(indio_dev, &data->buffer,
|
||||
iio_get_time_ns(indio_dev));
|
||||
|
||||
mutex_unlock(&data->mutex);
|
||||
iio_trigger_notify_done(indio_dev->trig);
|
||||
return IRQ_HANDLED;
|
||||
|
||||
unlock_err:
|
||||
mutex_unlock(&data->mutex);
|
||||
return IRQ_NONE;
|
||||
}
|
||||
|
||||
static irqreturn_t bma400_interrupt(int irq, void *private)
|
||||
{
|
||||
struct iio_dev *indio_dev = private;
|
||||
struct bma400_data *data = iio_priv(indio_dev);
|
||||
int ret;
|
||||
|
||||
/* Lock to protect the data->status */
|
||||
mutex_lock(&data->mutex);
|
||||
ret = regmap_bulk_read(data->regmap, BMA400_INT_STAT0_REG,
|
||||
&data->status,
|
||||
sizeof(data->status));
|
||||
/*
|
||||
* if none of the bit is set in the status register then it is
|
||||
* spurious interrupt.
|
||||
*/
|
||||
if (ret || !data->status)
|
||||
goto unlock_err;
|
||||
|
||||
if (FIELD_GET(BMA400_INT_DRDY_MSK, le16_to_cpu(data->status))) {
|
||||
mutex_unlock(&data->mutex);
|
||||
iio_trigger_poll_chained(data->trig);
|
||||
return IRQ_HANDLED;
|
||||
}
|
||||
|
||||
unlock_err:
|
||||
mutex_unlock(&data->mutex);
|
||||
return IRQ_NONE;
|
||||
}
|
||||
|
||||
int bma400_probe(struct device *dev, struct regmap *regmap, int irq,
|
||||
const char *name)
|
||||
{
|
||||
struct iio_dev *indio_dev;
|
||||
struct bma400_data *data;
|
||||
|
|
@ -841,8 +976,40 @@ int bma400_probe(struct device *dev, struct regmap *regmap, const char *name)
|
|||
indio_dev->info = &bma400_info;
|
||||
indio_dev->channels = bma400_channels;
|
||||
indio_dev->num_channels = ARRAY_SIZE(bma400_channels);
|
||||
indio_dev->available_scan_masks = bma400_avail_scan_masks;
|
||||
indio_dev->modes = INDIO_DIRECT_MODE;
|
||||
|
||||
if (irq > 0) {
|
||||
data->trig = devm_iio_trigger_alloc(dev, "%s-dev%d",
|
||||
indio_dev->name,
|
||||
iio_device_id(indio_dev));
|
||||
if (!data->trig)
|
||||
return -ENOMEM;
|
||||
|
||||
data->trig->ops = &bma400_trigger_ops;
|
||||
iio_trigger_set_drvdata(data->trig, indio_dev);
|
||||
|
||||
ret = devm_iio_trigger_register(data->dev, data->trig);
|
||||
if (ret)
|
||||
return dev_err_probe(data->dev, ret,
|
||||
"iio trigger register fail\n");
|
||||
|
||||
indio_dev->trig = iio_trigger_get(data->trig);
|
||||
ret = devm_request_threaded_irq(dev, irq, NULL,
|
||||
&bma400_interrupt,
|
||||
IRQF_TRIGGER_RISING | IRQF_ONESHOT,
|
||||
indio_dev->name, indio_dev);
|
||||
if (ret)
|
||||
return dev_err_probe(data->dev, ret,
|
||||
"request irq %d failed\n", irq);
|
||||
}
|
||||
|
||||
ret = devm_iio_triggered_buffer_setup(dev, indio_dev, NULL,
|
||||
&bma400_trigger_handler, NULL);
|
||||
if (ret)
|
||||
return dev_err_probe(data->dev, ret,
|
||||
"iio triggered buffer setup failed\n");
|
||||
|
||||
return devm_iio_device_register(dev, indio_dev);
|
||||
}
|
||||
EXPORT_SYMBOL_NS(bma400_probe, IIO_BMA400);
|
||||
|
|
|
|||
|
|
@ -24,7 +24,7 @@ static int bma400_i2c_probe(struct i2c_client *client,
|
|||
return PTR_ERR(regmap);
|
||||
}
|
||||
|
||||
return bma400_probe(&client->dev, regmap, id->name);
|
||||
return bma400_probe(&client->dev, regmap, client->irq, id->name);
|
||||
}
|
||||
|
||||
static const struct i2c_device_id bma400_i2c_ids[] = {
|
||||
|
|
|
|||
|
|
@ -84,7 +84,7 @@ static int bma400_spi_probe(struct spi_device *spi)
|
|||
if (ret)
|
||||
dev_err(&spi->dev, "Failed to read chip id register\n");
|
||||
|
||||
return bma400_probe(&spi->dev, regmap, id->name);
|
||||
return bma400_probe(&spi->dev, regmap, spi->irq, id->name);
|
||||
}
|
||||
|
||||
static const struct spi_device_id bma400_spi_ids[] = {
|
||||
|
|
|
|||
Loading…
Reference in New Issue