[ Upstream commit 64933ab7b0 ]
Both db_maxag and db_agpref are used as the index of the
db_agfree array, but there is currently no validity check for
db_maxag and db_agpref, which can lead to errors.
The following is related bug reported by Syzbot:
UBSAN: array-index-out-of-bounds in fs/jfs/jfs_dmap.c:639:20
index 7936 is out of range for type 'atomic_t[128]'
Add checking that the values of db_maxag and db_agpref are valid
indexes for the db_agfree array.
Reported-by: syzbot+38e876a8aa44b7115c76@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=38e876a8aa44b7115c76
Signed-off-by: Juntong Deng <juntong.deng@outlook.com>
Signed-off-by: Dave Kleikamp <dave.kleikamp@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 525b861a00 ]
l2nbperpage is log2(number of blks per page), and the minimum legal
value should be 0, not negative.
In the case of l2nbperpage being negative, an error will occur
when subsequently used as shift exponent.
Syzbot reported this bug:
UBSAN: shift-out-of-bounds in fs/jfs/jfs_dmap.c:799:12
shift exponent -16777216 is negative
Reported-by: syzbot+debee9ab7ae2b34b0307@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=debee9ab7ae2b34b0307
Signed-off-by: Juntong Deng <juntong.deng@outlook.com>
Signed-off-by: Dave Kleikamp <dave.kleikamp@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8bf7187d97 ]
Use FIELD_GET() to extract PCIe Negotiated Link Width field instead of
custom masking and shifting, and remove extract_width() which only
wraps that FIELD_GET().
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20230919125648.1920-2-ilpo.jarvinen@linux.intel.com
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Dean Luick <dean.luick@cornelisnetworks.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8f4f68e788 ]
We found a hungtask bug in test_aead_vec_cfg as follows:
INFO: task cryptomgr_test:391009 blocked for more than 120 seconds.
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
Call trace:
__switch_to+0x98/0xe0
__schedule+0x6c4/0xf40
schedule+0xd8/0x1b4
schedule_timeout+0x474/0x560
wait_for_common+0x368/0x4e0
wait_for_completion+0x20/0x30
wait_for_completion+0x20/0x30
test_aead_vec_cfg+0xab4/0xd50
test_aead+0x144/0x1f0
alg_test_aead+0xd8/0x1e0
alg_test+0x634/0x890
cryptomgr_test+0x40/0x70
kthread+0x1e0/0x220
ret_from_fork+0x10/0x18
Kernel panic - not syncing: hung_task: blocked tasks
For padata_do_parallel, when the return err is 0 or -EBUSY, it will call
wait_for_completion(&wait->completion) in test_aead_vec_cfg. In normal
case, aead_request_complete() will be called in pcrypt_aead_serial and the
return err is 0 for padata_do_parallel. But, when pinst->flags is
PADATA_RESET, the return err is -EBUSY for padata_do_parallel, and it
won't call aead_request_complete(). Therefore, test_aead_vec_cfg will
hung at wait_for_completion(&wait->completion), which will cause
hungtask.
The problem comes as following:
(padata_do_parallel) |
rcu_read_lock_bh(); |
err = -EINVAL; | (padata_replace)
| pinst->flags |= PADATA_RESET;
err = -EBUSY |
if (pinst->flags & PADATA_RESET) |
rcu_read_unlock_bh() |
return err
In order to resolve the problem, we replace the return err -EBUSY with
-EAGAIN, which means parallel_data is changing, and the caller should call
it again.
v3:
remove retry and just change the return err.
v2:
introduce padata_try_do_parallel() in pcrypt_aead_encrypt and
pcrypt_aead_decrypt to solve the hungtask.
Signed-off-by: Lu Jialin <lujialin4@huawei.com>
Signed-off-by: Guo Zihua <guozihua@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3f6f8a8c5e ]
The opened file should be closed in main(), otherwise resource
leak will occur that this problem was discovered by code reading
Signed-off-by: zhujun2 <zhujun2@cmss.chinamobile.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0f0e59075b ]
For pptable structs that use flexible array sizes, use flexible arrays.
Link: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/2036742
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 760efbca74 ]
For pptable structs that use flexible array sizes, use flexible arrays.
Suggested-by: Felix Held <felix.held@amd.com>
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2874
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit eb44ad4e63 ]
This field can be read or written without socket lock being held.
Add annotations to avoid load-store tearing.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cb4c132ebf ]
When compiling with clang 16.0.6 and CONFIG_FORTIFY_SOURCE=y, I've
noticed the following (somewhat confusing due to absence of an actual
source code location):
In file included from drivers/net/wireless/ath/ath10k/debug.c:8:
In file included from ./include/linux/module.h:13:
In file included from ./include/linux/stat.h:19:
In file included from ./include/linux/time.h:60:
In file included from ./include/linux/time32.h:13:
In file included from ./include/linux/timex.h:67:
In file included from ./arch/x86/include/asm/timex.h:5:
In file included from ./arch/x86/include/asm/processor.h:23:
In file included from ./arch/x86/include/asm/msr.h:11:
In file included from ./arch/x86/include/asm/cpumask.h:5:
In file included from ./include/linux/cpumask.h:12:
In file included from ./include/linux/bitmap.h:11:
In file included from ./include/linux/string.h:254:
./include/linux/fortify-string.h:592:4: warning: call to '__read_overflow2_field'
declared with 'warning' attribute: detected read beyond size of field (2nd
parameter); maybe use struct_group()? [-Wattribute-warning]
__read_overflow2_field(q_size_field, size);
The compiler actually complains on 'ath10k_debug_get_et_strings()' where
fortification logic inteprets call to 'memcpy()' as an attempt to copy
the whole 'ath10k_gstrings_stats' array from it's first member and so
issues an overread warning. This warning may be silenced by passing
an address of the whole array and not the first member to 'memcpy()'.
Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru>
Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20230829093652.234537-1-dmantipov@yandex.ru
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 95f97fe0ac ]
When compiling with clang 16.0.6 and CONFIG_FORTIFY_SOURCE=y, I've
noticed the following (somewhat confusing due to absence of an actual
source code location):
In file included from drivers/net/wireless/ath/ath9k/debug.c:17:
In file included from ./include/linux/slab.h:16:
In file included from ./include/linux/gfp.h:7:
In file included from ./include/linux/mmzone.h:8:
In file included from ./include/linux/spinlock.h:56:
In file included from ./include/linux/preempt.h:79:
In file included from ./arch/x86/include/asm/preempt.h:9:
In file included from ./include/linux/thread_info.h:60:
In file included from ./arch/x86/include/asm/thread_info.h:53:
In file included from ./arch/x86/include/asm/cpufeature.h:5:
In file included from ./arch/x86/include/asm/processor.h:23:
In file included from ./arch/x86/include/asm/msr.h:11:
In file included from ./arch/x86/include/asm/cpumask.h:5:
In file included from ./include/linux/cpumask.h:12:
In file included from ./include/linux/bitmap.h:11:
In file included from ./include/linux/string.h:254:
./include/linux/fortify-string.h:592:4: warning: call to '__read_overflow2_field'
declared with 'warning' attribute: detected read beyond size of field (2nd
parameter); maybe use struct_group()? [-Wattribute-warning]
__read_overflow2_field(q_size_field, size);
In file included from drivers/net/wireless/ath/ath9k/htc_drv_debug.c:17:
In file included from drivers/net/wireless/ath/ath9k/htc.h:20:
In file included from ./include/linux/module.h:13:
In file included from ./include/linux/stat.h:19:
In file included from ./include/linux/time.h:60:
In file included from ./include/linux/time32.h:13:
In file included from ./include/linux/timex.h:67:
In file included from ./arch/x86/include/asm/timex.h:5:
In file included from ./arch/x86/include/asm/processor.h:23:
In file included from ./arch/x86/include/asm/msr.h:11:
In file included from ./arch/x86/include/asm/cpumask.h:5:
In file included from ./include/linux/cpumask.h:12:
In file included from ./include/linux/bitmap.h:11:
In file included from ./include/linux/string.h:254:
./include/linux/fortify-string.h:592:4: warning: call to '__read_overflow2_field'
declared with 'warning' attribute: detected read beyond size of field (2nd
parameter); maybe use struct_group()? [-Wattribute-warning]
__read_overflow2_field(q_size_field, size);
The compiler actually complains on 'ath9k_get_et_strings()' and
'ath9k_htc_get_et_strings()' due to the same reason: fortification logic
inteprets call to 'memcpy()' as an attempt to copy the whole array from
it's first member and so issues an overread warning. These warnings may
be silenced by passing an address of the whole array and not the first
member to 'memcpy()'.
Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru>
Acked-by: Toke Høiland-Jørgensen <toke@toke.dk>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20230829093856.234584-1-dmantipov@yandex.ru
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e160ab8516 ]
We can get a UBSAN warning if ieee80211_get_tx_power() returns the
INT_MIN value mac80211 internally uses for "unset power level".
UBSAN: signed-integer-overflow in net/wireless/nl80211.c:3816:5
-2147483648 * 100 cannot be represented in type 'int'
CPU: 0 PID: 20433 Comm: insmod Tainted: G WC OE
Call Trace:
dump_stack+0x74/0x92
ubsan_epilogue+0x9/0x50
handle_overflow+0x8d/0xd0
__ubsan_handle_mul_overflow+0xe/0x10
nl80211_send_iface+0x688/0x6b0 [cfg80211]
[...]
cfg80211_register_wdev+0x78/0xb0 [cfg80211]
cfg80211_netdev_notifier_call+0x200/0x620 [cfg80211]
[...]
ieee80211_if_add+0x60e/0x8f0 [mac80211]
ieee80211_register_hw+0xda5/0x1170 [mac80211]
In this case, simply return an error instead, to indicate
that no data is available.
Cc: Zong-Zhe Yang <kevin_yang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://lore.kernel.org/r/20230203023636.4418-1-pkshih@realtek.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a1e2b8b368 ]
Qi Zheng reported crashes in a production environment and provided a
simplified example as a reproducer:
| For example, if we use Qemu to start a two NUMA node kernel,
| one of the nodes has 2M memory (less than NODE_MIN_SIZE),
| and the other node has 2G, then we will encounter the
| following panic:
|
| BUG: kernel NULL pointer dereference, address: 0000000000000000
| <...>
| RIP: 0010:_raw_spin_lock_irqsave+0x22/0x40
| <...>
| Call Trace:
| <TASK>
| deactivate_slab()
| bootstrap()
| kmem_cache_init()
| start_kernel()
| secondary_startup_64_no_verify()
The crashes happen because of inconsistency between the nodemask that
has nodes with less than 4MB as memoryless, and the actual memory fed
into the core mm.
The commit:
9391a3f9c7 ("[PATCH] x86_64: Clear more state when ignoring empty node in SRAT parsing")
... that introduced minimal size of a NUMA node does not explain why
a node size cannot be less than 4MB and what boot failures this
restriction might fix.
Fixes have been submitted to the core MM code to tighten up the
memory topologies it accepts and to not crash on weird input:
mm: page_alloc: skip memoryless nodes entirely
mm: memory_hotplug: drop memoryless node from fallback lists
Andrew has accepted them into the -mm tree, but there are no
stable SHA1's yet.
This patch drops the limitation for minimal node size on x86:
- which works around the crash without the fixes to the core MM.
- makes x86 topologies less weird,
- removes an arbitrary and undocumented limitation on NUMA topologies.
[ mingo: Improved changelog clarity. ]
Reported-by: Qi Zheng <zhengqi.arch@bytedance.com>
Tested-by: Mario Casquero <mcasquer@redhat.com>
Signed-off-by: Mike Rapoport (IBM) <rppt@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: David Hildenbrand <david@redhat.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Rik van Riel <riel@surriel.com>
Link: https://lore.kernel.org/r/ZS+2qqjEO5/867br@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6d3bc4c02d ]
On SAM9 hardware two cascaded 16 bit timers are used to form a 32 bit
high resolution timer that is used as scheduler clock when the kernel
has been configured that way (CONFIG_ATMEL_CLOCKSOURCE_TCB).
The driver initially triggers a reset-to-zero of the two timers but this
reset is only performed on the next rising clock. For the first timer
this is ok - it will be in the next 60ns (16MHz clock). For the chained
second timer this will only happen after the first timer overflows, i.e.
after 2^16 clocks (~4ms with a 16MHz clock). So with other words the
scheduler clock resets to 0 after the first 2^16 clock cycles.
It looks like that the scheduler does not like this and behaves wrongly
over its lifetime, e.g. some tasks are scheduled with a long delay. Why
that is and if there are additional requirements for this behaviour has
not been further analysed.
There is a simple fix for resetting the second timer as well when the
first timer is reset and this is to set the ATMEL_TC_ASWTRG_SET bit in
the Channel Mode register (CMR) of the first timer. This will also rise
the TIOA line (clock input of the second timer) when a software trigger
respective SYNC is issued.
Signed-off-by: Ronald Wahl <ronald.wahl@raritan.com>
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20231007161803.31342-1-rwahl@gmx.de
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bccdd80890 ]
In some cases running with the test-ww_mutex code, I was seeing
odd behavior where sometimes it seemed flush_workqueue was
returning before all the work threads were finished.
Often this would cause strange crashes as the mutexes would be
freed while they were being used.
Looking at the code, there is a lifetime problem as the
controlling thread that spawns the work allocates the
"struct stress" structures that are passed to the workqueue
threads. Then when the workqueue threads are finished,
they free the stress struct that was passed to them.
Unfortunately the workqueue work_struct node is in the stress
struct. Which means the work_struct is freed before the work
thread returns and while flush_workqueue is waiting.
It seems like a better idea to have the controlling thread
both allocate and free the stress structures, so that we can
be sure we don't corrupt the workqueue by freeing the structure
prematurely.
So this patch reworks the test to do so, and with this change
I no longer see the early flush_workqueue returns.
Signed-off-by: John Stultz <jstultz@google.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20230922043616.19282-3-jstultz@google.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit dec96fc2dc ]
In the tree search v2 ioctl we use the type size_t, which is an unsigned
long, to track the buffer size in the local variable 'buf_size'. An
unsigned long is 32 bits wide on a 32 bits architecture. The buffer size
defined in struct btrfs_ioctl_search_args_v2 is a u64, so when we later
try to copy the local variable 'buf_size' to the argument struct, when
the search returns -EOVERFLOW, we copy only 32 bits which will be a
problem on big endian systems.
Fix this by using a u64 type for the buffer sizes, not only at
btrfs_ioctl_tree_search_v2(), but also everywhere down the call chain
so that we can use the u64 at btrfs_ioctl_tree_search_v2().
Fixes: cc68a8a5a4 ("btrfs: new ioctl TREE_SEARCH_V2")
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://lore.kernel.org/linux-btrfs/ce6f4bd6-9453-4ffe-ba00-cee35495e10f@moroto.mountain/
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a5035c8184 ]
wr_reg_wa() is not an appropriate name for a global function, and doesn't need
to be global anyway, so mark it static and avoid the warning:
drivers/video/fbdev/fsl-diu-fb.c:493:6: error: no previous prototype for 'wr_reg_wa' [-Werror=missing-prototypes]
Fixes: 0d9dab39fb ("powerpc/5121: fsl-diu-fb: fix issue with re-enabling DIU area descriptor")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9fc3bc7643 ]
Dell R650xs servers hangs on reboot if tg3 driver calls
tg3_power_down.
This happens only if network adapters (BCM5720 for R650xs) were
initialized using SNP (e.g. by booting ipxe.efi).
The actual problem is on Dell side, but this fix allows servers
to come back alive after reboot.
Signed-off-by: George Shuklin <george.shuklin@gmail.com>
Fixes: 2ca1c94ce0 ("tg3: Disable tg3 device on system reboot to avoid triggering AER")
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Reviewed-by: Michael Chan <michael.chan@broadcom.com>
Link: https://lore.kernel.org/r/20231103115029.83273-1-george.shuklin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 23be1e0e2a ]
Initially, commit 4237c75c0a ("[MLSXFRM]: Auto-labeling of child
sockets") introduced security_inet_conn_request() in some functions
where reqsk is allocated. The hook is added just after the allocation,
so reqsk's IPv6 remote address was not initialised then.
However, SELinux/Smack started to read it in netlbl_req_setattr()
after commit e1adea9270 ("calipso: Allow request sockets to be
relabelled by the lsm.").
Commit 284904aa79 ("lsm: Relocate the IPv4 security_inet_conn_request()
hooks") fixed that kind of issue only in TCPv4 because IPv6 labeling was
not supported at that time. Finally, the same issue was introduced again
in IPv6.
Let's apply the same fix on DCCPv6 and TCPv6.
Fixes: e1adea9270 ("calipso: Allow request sockets to be relabelled by the lsm.")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Acked-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fa2df45af1 ]
Initially, commit 4237c75c0a ("[MLSXFRM]: Auto-labeling of child
sockets") introduced security_inet_conn_request() in some functions
where reqsk is allocated. The hook is added just after the allocation,
so reqsk's IPv4 remote address was not initialised then.
However, SELinux/Smack started to read it in netlbl_req_setattr()
after the cited commits.
This bug was partially fixed by commit 284904aa79 ("lsm: Relocate
the IPv4 security_inet_conn_request() hooks").
This patch fixes the last bug in DCCPv4.
Fixes: 389fb800ac ("netlabel: Label incoming TCP connections correctly in SELinux")
Fixes: 07feee8f81 ("netlabel: Cleanup the Smack/NetLabel code to fix incoming TCP connections")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Acked-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 19b3f72a41 ]
syzbot reported the following uninit-value access issue [1]:
=====================================================
BUG: KMSAN: uninit-value in strlen lib/string.c:418 [inline]
BUG: KMSAN: uninit-value in strstr+0xb8/0x2f0 lib/string.c:756
strlen lib/string.c:418 [inline]
strstr+0xb8/0x2f0 lib/string.c:756
tipc_nl_node_reset_link_stats+0x3ea/0xb50 net/tipc/node.c:2595
genl_family_rcv_msg_doit net/netlink/genetlink.c:971 [inline]
genl_family_rcv_msg net/netlink/genetlink.c:1051 [inline]
genl_rcv_msg+0x11ec/0x1290 net/netlink/genetlink.c:1066
netlink_rcv_skb+0x371/0x650 net/netlink/af_netlink.c:2545
genl_rcv+0x40/0x60 net/netlink/genetlink.c:1075
netlink_unicast_kernel net/netlink/af_netlink.c:1342 [inline]
netlink_unicast+0xf47/0x1250 net/netlink/af_netlink.c:1368
netlink_sendmsg+0x1238/0x13d0 net/netlink/af_netlink.c:1910
sock_sendmsg_nosec net/socket.c:730 [inline]
sock_sendmsg net/socket.c:753 [inline]
____sys_sendmsg+0x9c2/0xd60 net/socket.c:2541
___sys_sendmsg+0x28d/0x3c0 net/socket.c:2595
__sys_sendmsg net/socket.c:2624 [inline]
__do_sys_sendmsg net/socket.c:2633 [inline]
__se_sys_sendmsg net/socket.c:2631 [inline]
__x64_sys_sendmsg+0x307/0x490 net/socket.c:2631
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
Uninit was created at:
slab_post_alloc_hook+0x12f/0xb70 mm/slab.h:767
slab_alloc_node mm/slub.c:3478 [inline]
kmem_cache_alloc_node+0x577/0xa80 mm/slub.c:3523
kmalloc_reserve+0x13d/0x4a0 net/core/skbuff.c:559
__alloc_skb+0x318/0x740 net/core/skbuff.c:650
alloc_skb include/linux/skbuff.h:1286 [inline]
netlink_alloc_large_skb net/netlink/af_netlink.c:1214 [inline]
netlink_sendmsg+0xb34/0x13d0 net/netlink/af_netlink.c:1885
sock_sendmsg_nosec net/socket.c:730 [inline]
sock_sendmsg net/socket.c:753 [inline]
____sys_sendmsg+0x9c2/0xd60 net/socket.c:2541
___sys_sendmsg+0x28d/0x3c0 net/socket.c:2595
__sys_sendmsg net/socket.c:2624 [inline]
__do_sys_sendmsg net/socket.c:2633 [inline]
__se_sys_sendmsg net/socket.c:2631 [inline]
__x64_sys_sendmsg+0x307/0x490 net/socket.c:2631
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
TIPC bearer-related names including link names must be null-terminated
strings. If a link name which is not null-terminated is passed through
netlink, strstr() and similar functions can cause buffer overrun. This
causes the above issue.
This patch changes the nla_policy for bearer-related names from NLA_STRING
to NLA_NUL_STRING. This resolves the issue by ensuring that only
null-terminated strings are accepted as bearer-related names.
syzbot reported similar uninit-value issue related to bearer names [2]. The
root cause of this issue is that a non-null-terminated bearer name was
passed. This patch also resolved this issue.
Fixes: 7be57fc691 ("tipc: add link get/dump to new netlink api")
Fixes: 0655f6a863 ("tipc: add bearer disable/enable to new netlink api")
Reported-and-tested-by: syzbot+5138ca807af9d2b42574@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=5138ca807af9d2b42574 [1]
Reported-and-tested-by: syzbot+9425c47dccbcb4c17d51@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=9425c47dccbcb4c17d51 [2]
Signed-off-by: Shigeru Yoshida <syoshida@redhat.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/20231030075540.3784537-1-syoshida@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7b3ba18703 ]
LLC reads the mac header with eth_hdr without verifying that the skb
has an Ethernet header.
Syzbot was able to enter llc_rcv on a tun device. Tun can insert
packets without mac len and with user configurable skb->protocol
(passing a tun_pi header when not configuring IFF_NO_PI).
BUG: KMSAN: uninit-value in llc_station_ac_send_test_r net/llc/llc_station.c:81 [inline]
BUG: KMSAN: uninit-value in llc_station_rcv+0x6fb/0x1290 net/llc/llc_station.c:111
llc_station_ac_send_test_r net/llc/llc_station.c:81 [inline]
llc_station_rcv+0x6fb/0x1290 net/llc/llc_station.c:111
llc_rcv+0xc5d/0x14a0 net/llc/llc_input.c:218
__netif_receive_skb_one_core net/core/dev.c:5523 [inline]
__netif_receive_skb+0x1a6/0x5a0 net/core/dev.c:5637
netif_receive_skb_internal net/core/dev.c:5723 [inline]
netif_receive_skb+0x58/0x660 net/core/dev.c:5782
tun_rx_batched+0x3ee/0x980 drivers/net/tun.c:1555
tun_get_user+0x54c5/0x69c0 drivers/net/tun.c:2002
Add a mac_len test before all three eth_hdr(skb) calls under net/llc.
There are further uses in include/net/llc_pdu.h. All these are
protected by a test skb->protocol == ETH_P_802_2. Which does not
protect against this tun scenario.
But the mac_len test added in this patch in llc_fixup_skb will
indirectly protect those too. That is called from llc_rcv before any
other LLC code.
It is tempting to just add a blanket mac_len check in llc_rcv, but
not sure whether that could break valid LLC paths that do not assume
an Ethernet header. 802.2 LLC may be used on top of non-802.3
protocols in principle. The below referenced commit shows that used
to, on top of Token Ring.
At least one of the three eth_hdr uses goes back to before the start
of git history. But the one that syzbot exercises is introduced in
this commit. That commit is old enough (2008), that effectively all
stable kernels should receive this.
Fixes: f83f1768f8 ("[LLC]: skb allocation size for responses")
Reported-by: syzbot+a8c7be6dee0de1b669cc@syzkaller.appspotmail.com
Signed-off-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/r/20231025234251.3796495-1-willemdebruijn.kernel@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e9bc441154 ]
The suspend/resume functions currently utilize
clk_disable()/clk_enable() respectively which may be no-ops with certain
clock providers such as SCMI. Fix this to use clk_disable_unprepare()
and clk_prepare_enable() respectively as we should.
Fixes: 3a9f595702 ("pwm: Add Broadcom BCM7038 PWM controller support")
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f31b2cb85f ]
Instead of returning an error, goto the mutex unlock at
the end of the function.
Fixes smatch warning:
drivers/media/usb/dvb-usb-v2/af9035.c:467 af9035_i2c_master_xfer() warn: inconsistent returns '&d->i2c_mutex'.
Locked on : 326,387
Unlocked on: 465,467
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Fixes: 7bf744f2de ("media: dvb-usb-v2: af9035: Fix null-ptr-deref in af9035_i2c_master_xfer")
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 61334819ac ]
s3c_camif_register_video_node() works with video_device structure stored
as a field of camif_vp, so it should not be kfreed.
But there is video_device_release() on error path that do it.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: babde1c243 ("[media] V4L: Add driver for S3C24XX/S3C64XX SoC series camera interface")
Signed-off-by: Katya Orlova <e.orlova@ispras.ru>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 99e1241049 ]
Afer commit 1fa5ae857b ("driver core: get rid of struct device's
bus_id string array"), the name of device is allocated dynamically.
Therefore, it needs to be freed, which is done by the driver core for
us once all references to the device are gone. Therefore, move the
dev_set_name() call immediately before the call device_register(), which
either succeeds (then the freeing will be done upon subsequent remvoal),
or puts the reference in the error call. Also, it is not unusual that the
return value of dev_set_name is not checked.
Fixes: 1fa5ae857b ("driver core: get rid of struct device's bus_id string array")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
[linux@dominikbrodowski.net: simplification, commit message modified]
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 402ab979b2 ]
As the comment of device_register() says, it should use put_device()
to give up the reference in the error path. Then, insofar resources
will be freed in pcmcia_release_dev(), the error path is no longer
needed. In particular, this means that the (previously missing) dropping
of the reference to &p_dev->function_config->ref is now handled by
pcmcia_release_dev().
Fixes: 360b65b95b ("[PATCH] pcmcia: make config_t independent, add reference counting")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
[linux@dominikbrodowski.net: simplification, commit message rewrite]
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e3ea1b4847 ]
If device_register() returns error in pccardd(), it leads two issues:
1. The socket_released has never been completed, it will block
pcmcia_unregister_socket(), because of waiting for completion
of socket_released.
2. The device name allocated by dev_set_name() is leaked.
Fix this two issues by calling put_device() when device_register() fails.
socket_released can be completed in pcmcia_release_socket(), the name can
be freed in kobject_cleanup().
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 83c761f568 ]
If pxad_alloc_desc() fails on the first dma_pool_alloc() call, then
sw_desc->nb_desc is zero.
In such a case pxad_free_desc() is called and it will BUG_ON().
Remove this erroneous BUG_ON().
It is also useless, because if "sw_desc->nb_desc == 0", then, on the first
iteration of the for loop, i is -1 and the loop will not be executed.
(both i and sw_desc->nb_desc are 'int')
Fixes: a57e16cf03 ("dmaengine: pxa: add pxa dmaengine driver")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/c8fc5563c9593c914fde41f0f7d1489a21b45a9a.1696676782.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9747576348 ]
If a hub is disconnected that has device(s) that's attached to the usbip layer
the disconnect function might fail because it tries to release the port
on an already disconnected hub.
Fixes: 6080cd0e92 ("staging: usbip: claim ports used by shared devices")
Signed-off-by: Jonas Blixt <jonas.blixt@actia.se>
Acked-by: Shuah Khan <skhan@linuxfoundation.org>
Link: https://lore.kernel.org/r/20230615092810.1215490-1-jonas.blixt@actia.se
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4d08c3d12b ]
It is not allowed to call kfree_skb() from hardware interrupt
context or with hardware interrupts being disabled.
So replace kfree_skb() with dev_kfree_skb_irq() under
spin_lock_irqsave(). Compile tested only.
Fixes: 53618cc1e5 ("Staging: sources for ST core")
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Link: https://lore.kernel.org/r/20230823035020.1281892-1-ruanjinjie@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 14f6d31791 ]
Zero is not a valid IRQ for in-kernel code and the irq_of_parse_and_map()
function returns zero on error. So this check for valid IRQs should only
accept values > 0.
Fixes: 2b6b3b7420 ("ARM/dmaengine: edma: Merge the two drivers under drivers/dma/")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Acked-by: Peter Ujfalusi <peter.ujfalusi@gmail.com>
Link: https://lore.kernel.org/r/f15cb6a7-8449-4f79-98b6-34072f04edbc@moroto.mountain
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ef307bc6ef ]
In _dwc2_hcd_urb_enqueue(), "urb->hcpriv = NULL" is executed without
holding the lock "hsotg->lock". In _dwc2_hcd_urb_dequeue():
spin_lock_irqsave(&hsotg->lock, flags);
...
if (!urb->hcpriv) {
dev_dbg(hsotg->dev, "## urb->hcpriv is NULL ##\n");
goto out;
}
rc = dwc2_hcd_urb_dequeue(hsotg, urb->hcpriv); // Use urb->hcpriv
...
out:
spin_unlock_irqrestore(&hsotg->lock, flags);
When _dwc2_hcd_urb_enqueue() and _dwc2_hcd_urb_dequeue() are
concurrently executed, the NULL check of "urb->hcpriv" can be executed
before "urb->hcpriv = NULL". After urb->hcpriv is NULL, it can be used
in the function call to dwc2_hcd_urb_dequeue(), which can cause a NULL
pointer dereference.
This possible bug is found by an experimental static analysis tool
developed by myself. This tool analyzes the locking APIs to extract
function pairs that can be concurrently executed, and then analyzes the
instructions in the paired functions to identify possible concurrency
bugs including data races and atomicity violations. The above possible
bug is reported, when my tool analyzes the source code of Linux 6.5.
To fix this possible bug, "urb->hcpriv = NULL" should be executed with
holding the lock "hsotg->lock". After using this patch, my tool never
reports the possible bug, with the kernelconfiguration allyesconfig for
x86_64. Because I have no associated hardware, I cannot test the patch
in runtime testing, and just verify it according to the code logic.
Fixes: 33ad261aa6 ("usb: dwc2: host: spinlock urb_enqueue")
Signed-off-by: Jia-Ju Bai <baijiaju@buaa.edu.cn>
Link: https://lore.kernel.org/r/20230926024404.832096-1-baijiaju@buaa.edu.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 11e7f27b79 ]
There is a pid leakage:
------------------------------
unreferenced object 0xffff88810c181940 (size 224):
comm "sshd", pid 8191, jiffies 4294946950 (age 524.570s)
hex dump (first 32 bytes):
01 00 00 00 00 00 00 00 00 00 00 00 ad 4e ad de .............N..
ff ff ff ff 6b 6b 6b 6b ff ff ff ff ff ff ff ff ....kkkk........
backtrace:
[<ffffffff814774e6>] kmem_cache_alloc+0x5c6/0x9b0
[<ffffffff81177342>] alloc_pid+0x72/0x570
[<ffffffff81140ac4>] copy_process+0x1374/0x2470
[<ffffffff81141d77>] kernel_clone+0xb7/0x900
[<ffffffff81142645>] __se_sys_clone+0x85/0xb0
[<ffffffff8114269b>] __x64_sys_clone+0x2b/0x30
[<ffffffff83965a72>] do_syscall_64+0x32/0x80
[<ffffffff83a00085>] entry_SYSCALL_64_after_hwframe+0x61/0xc6
It turns out that there is a race condition between disassociate_ctty() and
tty_signal_session_leader(), which caused this leakage.
The pid memleak is triggered by the following race:
task[sshd] task[bash]
----------------------- -----------------------
disassociate_ctty();
spin_lock_irq(¤t->sighand->siglock);
put_pid(current->signal->tty_old_pgrp);
current->signal->tty_old_pgrp = NULL;
tty = tty_kref_get(current->signal->tty);
spin_unlock_irq(¤t->sighand->siglock);
tty_vhangup();
tty_lock(tty);
...
tty_signal_session_leader();
spin_lock_irq(&p->sighand->siglock);
...
if (tty->ctrl.pgrp) //tty->ctrl.pgrp is not NULL
p->signal->tty_old_pgrp = get_pid(tty->ctrl.pgrp); //An extra get
spin_unlock_irq(&p->sighand->siglock);
...
tty_unlock(tty);
if (tty) {
tty_lock(tty);
...
put_pid(tty->ctrl.pgrp);
tty->ctrl.pgrp = NULL; //It's too late
...
tty_unlock(tty);
}
The issue is believed to be introduced by commit c8bcd9c5be ("tty:
Fix ->session locking") who moves the unlock of siglock in
disassociate_ctty() above "if (tty)", making a small window allowing
tty_signal_session_leader() to kick in. It can be easily reproduced by
adding a delay before "if (tty)" and at the entrance of
tty_signal_session_leader().
To fix this issue, we move "put_pid(current->signal->tty_old_pgrp)" after
"tty->ctrl.pgrp = NULL".
Fixes: c8bcd9c5be ("tty: Fix ->session locking")
Signed-off-by: Yi Yang <yiyang13@huawei.com>
Co-developed-by: GUO Zihua <guozihua@huawei.com>
Signed-off-by: GUO Zihua <guozihua@huawei.com>
Link: https://lore.kernel.org/r/20230831023329.165737-1-yiyang13@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 759c409bc5 ]
The dln2_free() already contains usb_put_dev(). Therefore,
the redundant usb_put_dev() before dln2_free() may lead to
a double free.
Fixes: 96da8f1483 ("mfd: dln2: Fix memory leak in dln2_probe()")
Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn>
Link: https://lore.kernel.org/r/20230925024134.9683-1-dinghao.liu@zju.edu.cn
Signed-off-by: Lee Jones <lee@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 553f7ac78f ]
The SuperH BIOS earlyprintk code is protected by CONFIG_EARLY_PRINTK.
However, when this protection was added, it was missed that SuperH no
longer defines an EARLY_PRINTK config symbol since commit
e76fe57447 ("sh: Remove old early serial console code V2"), so
BIOS earlyprintk can no longer be used.
Fix this by reviving the EARLY_PRINTK config symbol.
Fixes: d0380e6c3c ("early_printk: consolidate random copies of identical code")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Link: https://lore.kernel.org/r/c40972dfec3dcc6719808d5df388857360262878.1697708489.git.geert+renesas@glider.be
Signed-off-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d4b2d16571 ]
Increase name array to be large enough to overcome the following
compilation error.
drivers/infiniband/hw/hfi1/efivar.c: In function ‘read_hfi1_efi_var’:
drivers/infiniband/hw/hfi1/efivar.c:124:44: error: ‘snprintf’ output may be truncated before the last format character [-Werror=format-truncation=]
124 | snprintf(name, sizeof(name), "%s-%s", prefix_name, kind);
| ^
drivers/infiniband/hw/hfi1/efivar.c:124:9: note: ‘snprintf’ output 2 or more bytes (assuming 65) into a destination of size 64
124 | snprintf(name, sizeof(name), "%s-%s", prefix_name, kind);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/infiniband/hw/hfi1/efivar.c:133:52: error: ‘snprintf’ output may be truncated before the last format character [-Werror=format-truncation=]
133 | snprintf(name, sizeof(name), "%s-%s", prefix_name, kind);
| ^
drivers/infiniband/hw/hfi1/efivar.c:133:17: note: ‘snprintf’ output 2 or more bytes (assuming 65) into a destination of size 64
133 | snprintf(name, sizeof(name), "%s-%s", prefix_name, kind);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
cc1: all warnings being treated as errors
make[6]: *** [scripts/Makefile.build:243: drivers/infiniband/hw/hfi1/efivar.o] Error 1
Fixes: c03c08d50b ("IB/hfi1: Check upper-case EFI variables")
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Link: https://lore.kernel.org/r/238fa39a8fd60e87a5ad7e1ca6584fcdf32e9519.1698159993.git.leonro@nvidia.com
Acked-by: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c0e824661f ]
memset() description in ISO/IEC 9899:1999 (and elsewhere) says:
The memset function copies the value of c (converted to an
unsigned char) into each of the first n characters of the
object pointed to by s.
The kernel's arm32 memset does not cast c to unsigned char. This results
in the following code to produce erroneous output:
char a[128];
memset(a, -128, sizeof(a));
This is because gcc will generally emit the following code before
it calls memset() :
mov r0, r7
mvn r1, #127 ; 0x7f
bl 00000000 <memset>
r1 ends up with 0xffffff80 before being used by memset() and the
'a' array will have -128 once in every four bytes while the other
bytes will be set incorrectly to -1 like this (printing the first
8 bytes) :
test_module: -128 -1 -1 -1
test_module: -1 -1 -1 -128
The change here is to 'and' r1 with 255 before it is used.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Kursad Oney <kursad.oney@broadcom.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 464bd8ec2f ]
When the membase and pci_dev pointer were moved to a new struct in priv,
the actual membase users were left untouched, and they started reading
out arbitrary memory behind the struct instead of registers. This
unfortunately turned the RNG into a constant number generator, depending
on the content of what was at that offset.
To fix this, update geode_rng_data_{read,present}() to also get the
membase via amd_geode_priv, and properly read from the right addresses
again.
Fixes: 9f6ec8dc57 ("hwrng: geode - Fix PCI device refcount leak")
Reported-by: Timur I. Davletshin <timur.davletshin@gmail.com>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=217882
Tested-by: Timur I. Davletshin <timur.davletshin@gmail.com>
Suggested-by: Jo-Philipp Wich <jo@mein.io>
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7b7a224b1b ]
The TI-SCI message protocol provides a way to communicate between
various compute processors with a central system controller entity. It
provides the fundamental device management capability and clock control
in the SOCs that it's used in.
The remove function failed to do all the necessary cleanup if
there are registered users. Some things are freed however which
likely results in an oops later on.
Ensure that the driver isn't unbound by suppressing its bind and unbind
sysfs attributes. As the driver is built-in there is no way to remove
device once bound.
We can also remove the ti_sci_remove call along with the
ti_sci_debugfs_destroy as there are no callers for it any longer.
Fixes: aa276781a6 ("firmware: Add basic support for TI System Control Interface (TI-SCI) protocol")
Reported-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Closes: https://lore.kernel.org/linux-arm-kernel/20230216083908.mvmydic5lpi3ogo7@pengutronix.de/
Suggested-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Dhruva Gole <d-gole@ti.com>
Link: https://lore.kernel.org/r/20230921091025.133130-1-d-gole@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 09f8ee81b6 ]
Fixed regulator put under "regulators" node will not be populated,
unless simple-bus or something similar is used. Drop the "regulators"
wrapper node to fix this.
Fixes: 2c5e596524 ("ARM: dts: Add MDM9615 dtsi")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20230924183914.51414-3-krzysztof.kozlowski@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 44b968d0d0 ]
cdn_dp_audio_codec_init() can fail. So add some error handling.
If component_add() fails, the previous cdn_dp_audio_codec_init() call
should be undone, as already done in the remove function.
Fixes: 88582f5646 ("drm/rockchip: cdn-dp: Don't unregister audio dev when unbinding")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/8494a41602fadb7439630921a9779640698f2f9f.1693676045.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit dd05484f99 ]
Buffer 'afmt_status' of size 6 could overflow, since index 'afmt_idx' is
checked after access.
Fixes: 5cc4e5fc29 ("drm/radeon: Cleanup HDMI audio interrupt handling for evergreen")
Co-developed-by: Ivanov Mikhail <ivanov.mikhail1@huawei-partners.com>
Signed-off-by: Konstantin Meskhidze <konstantin.meskhidze@huawei.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 13fc28804b ]
struct rockchip_crtc_state members such as output_type, output_bpc and
enable_afbc is always reset to zero in the atomic_duplicate_state crtc
funcs.
Fix this by using kmemdup on the subclass rockchip_crtc_state struct.
Fixes: 4e257d9eee ("drm/rockchip: get rid of rockchip_drm_crtc_mode_config")
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20230621223311.2239547-2-jonas@kwiboo.se
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ed85891a27 ]
When a WMI device besides the first one somehow fails to register,
retval is returned while still containing a negative error code. This
causes the ACPI device fail to probe, leaving behind zombie WMI devices
leading to various errors later.
Handle the single error path separately and return 0 unconditionally
after trying to register all WMI devices to solve the issue. Also
continue to register WMI devices even if some fail to allocate memory.
Fixes: 6ee50aaa9a ("platform/x86: wmi: Instantiate all devices before adding them")
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/20231020211005.38216-4-W_Armin@gmx.de
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Juntong Deng