[ Upstream commit 074cffb502 ]
Conversion of target_freq to HZ in scmi_cpufreq_fast_switch()
can lead to overflow if the multiplied result is greater than
UINT_MAX, since type of target_freq is unsigned int. Avoid this
overflow by assigning target_freq to unsigned long variable for
converting it to HZ.
Signed-off-by: Jagadeesh Kona <quic_jkona@quicinc.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cf7de25878 ]
cppc_cpufreq_get_rate() and hisi_cppc_cpufreq_get_rate() can be called from
different places with various parameters. So cpufreq_cpu_get() can return
null as 'policy' in some circumstances.
Fix this bug by adding null return check.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: a28b2bfc09 ("cppc_cpufreq: replace per-cpu data array with a list")
Signed-off-by: Aleksandr Mishin <amishin@t-argos.ru>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b8f85833c0 ]
The exit() callback is optional and shouldn't be called without checking
a valid pointer first.
Also, we must clear freq_table pointer even if the exit() callback isn't
present.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Fixes: 91a12e91dc ("cpufreq: Allow light-weight tear down and bring up of CPUs")
Fixes: f339f35417 ("cpufreq: Rearrange locking in cpufreq_remove_dev()")
Reported-by: Lizhe <sensor1010@163.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f339f35417 ]
Currently, cpufreq_remove_dev() invokes the ->exit() driver callback
without holding the policy rwsem which is inconsistent with what
happens if ->exit() is invoked directly from cpufreq_offline().
It also manipulates the real_cpus mask and removes the CPU device
symlink without holding the policy rwsem, but cpufreq_offline() holds
the rwsem around the modifications thereof.
For consistency, modify cpufreq_remove_dev() to hold the policy rwsem
until the ->exit() callback has been called (or it has been determined
that it is not necessary to call it).
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Stable-dep-of: b8f85833c0 ("cpufreq: exit() callback is optional")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fddd8f86df ]
Split the "core" part running under the policy rwsem out of
cpufreq_offline() to allow the locking in cpufreq_remove_dev() to be
rearranged more easily.
As a side-effect this eliminates the unlock label that's not needed
any more.
No expected functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Stable-dep-of: b8f85833c0 ("cpufreq: exit() callback is optional")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e1e962c5b9 ]
Notice that cpufreq_offline() only needs to check policy_is_inactive()
once and rearrange the code in there to make that happen.
No expected functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Stable-dep-of: b8f85833c0 ("cpufreq: exit() callback is optional")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d2399501c2 ]
Commit 0499a78369 ("ARM64: Dynamically allocate cpumasks and increase
supported CPUs to 512") changed the handling of cpumasks on ARM 64bit,
what resulted in the strange issues and warnings during cpufreq-dt
initialization on some big.LITTLE platforms.
This was caused by mixing OPPs between big and LITTLE cores, because
OPP-sharing information between big and LITTLE cores is computed on
cpumask, which in turn was not zeroed on allocation. Fix this by
switching to zalloc_cpumask_var() call.
Fixes: dc279ac6e5 ("cpufreq: dt: Refactor initialization to handle probe deferral properly")
CC: stable@vger.kernel.org # v5.10+
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Christoph Lameter (Ampere) <cl@linux.com>
Reviewed-by: Dhruva Gole <d-gole@ti.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit eaffb10b51 ]
devm_regulator_get_optional() returns -ENODEV if no supply can be found.
By introducing its usage, commit 788715b5f2 ("cpufreq: mediatek-hw:
Wait for CPU supplies before probing") caused the driver to fail probe
if no supply was present in any of the CPU DT nodes.
Use devm_regulator_get() instead since the CPUs do require supplies
even if not described in the DT. It will gracefully return a dummy
regulator if none is found in the DT node, allowing probe to succeed.
Fixes: 788715b5f2 ("cpufreq: mediatek-hw: Wait for CPU supplies before probing")
Reported-by: kernelci.org bot <bot@kernelci.org>
Closes: https://linux.kernelci.org/test/case/id/65b0b169710edea22852a3fa/
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 788715b5f2 ]
Before proceeding with the probe and enabling frequency scaling for the
CPUs, make sure that all supplies feeding the CPUs have probed.
This fixes an issue observed on MT8195-Tomato where if the
mediatek-cpufreq-hw driver enabled the hardware (by writing to
REG_FREQ_ENABLE) before the SPMI controller driver (spmi-mtk-pmif),
behind which lies the big CPU supply, probed the platform would hang
shortly after with "rcu: INFO: rcu_preempt detected stalls on
CPUs/tasks" being printed in the log.
Fixes: 4855e26bcf ("cpufreq: mediatek-hw: Add support for CPUFREQ HW")
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a70eb93a24 ]
The DT of_device.h and of_platform.h date back to the separate
of_platform_bus_type before it as merged into the regular platform bus.
As part of that merge prepping Arm DT support 13 years ago, they
"temporarily" include each other. They also include platform_device.h
and of.h. As a result, there's a pretty much random mix of those include
files used throughout the tree. In order to detangle these headers and
replace the implicit includes with struct declarations, users need to
explicitly include the correct includes.
Signed-off-by: Rob Herring <robh@kernel.org>
Acked-by: Rafael J. Wysocki <rafael@kernel.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Stable-dep-of: 788715b5f2 ("cpufreq: mediatek-hw: Wait for CPU supplies before probing")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f661017e6d ]
cpufreq_cpu_get may return NULL. To avoid NULL-dereference check it
and return 0 in case of error.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: de322e0859 ("cpufreq: brcmstb-avs-cpufreq: AVS CPUfreq driver for Broadcom STB SoCs")
Signed-off-by: Anastasia Belova <abelova@astralinux.ru>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f0a0fc10ab ]
There is a loophole in pstate limit clamping for the intel_cpufreq CPU
frequency scaling driver (intel_pstate in passive mode), schedutil CPU
frequency scaling governor, HWP (HardWare Pstate) control enabled, when
the adjust_perf call back path is used.
Fix it.
Fixes: a365ab6b9d cpufreq: intel_pstate: Implement the ->adjust_perf() callback
Signed-off-by: Doug Smythies <dsmythies@telus.net>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 192cdb1c90 ]
On systems using HWP, if a given frequency is equal to the maximum turbo
frequency or the maximum non-turbo frequency, the HWP performance level
corresponding to it is already known and can be used directly without
any computation.
Accordingly, adjust the code to use the known HWP performance levels in
the cases mentioned above.
This also helps to avoid limiting CPU capacity artificially in some
cases when the BIOS produces the HWP_CAP numbers using a different
E-core-to-P-core performance scaling factor than expected by the kernel.
Fixes: f5c8cf2a49 ("cpufreq: intel_pstate: hybrid: Use known scaling factor for P-cores")
Cc: 6.1+ <stable@vger.kernel.org> # 6.1+
Tested-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 458b03f81a ]
It is not necessary to call intel_pstate_get_hwp_cap() from
intel_pstate_update_perf_limits(), because it gets called from
intel_pstate_verify_cpu_policy() which is either invoked directly
right before intel_pstate_update_perf_limits(), in
intel_cpufreq_verify_policy() in the passive mode, or called
from driver callbacks in a sequence that causes it to be followed
by an immediate intel_pstate_update_perf_limits().
Namely, in the active mode intel_cpufreq_verify_policy() is called
by intel_pstate_verify_policy() which is the ->verify() callback
routine of intel_pstate and gets called by the cpufreq core right
before intel_pstate_set_policy(), which is the driver's ->setoplicy()
callback routine, where intel_pstate_update_perf_limits() is called.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Stable-dep-of: 192cdb1c90 ("cpufreq: intel_pstate: Refine computation of P-state for given frequency")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c4a5118a3a ]
devm_of_clk_add_hw_provider() may return an errno, so
add a return value check
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: 8410e7f3b3 ("cpufreq: scmi: Fix OPP addition failure with a dummy clock provider")
Signed-off-by: Alexandra Diupina <adiupina@astralinux.ru>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b8f3a396a7 ]
It is preferred to use typed property access functions (i.e.
of_property_read_<type> functions) rather than low-level
of_get_property/of_find_property functions for reading properties. As
part of this, convert of_get_property/of_find_property calls to the
recently added of_property_present() helper when we just want to test
for presence of a property and nothing more.
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Stable-dep-of: c4a5118a3a ("cpufreq: scmi: process the result of devm_of_clk_add_hw_provider()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2e4e0984c7 ]
For a 900MHz i.MX6ULL CPU the 792MHz OPP is disabled. There is no
convincing reason to disable this OPP. If a CPU can run at 900MHz,
it should also be able to cope with 792MHz. Looking at the voltage
level of 792MHz in [1] (page 24, table 10. "Operating Ranges") the
current defined OPP is above the minimum. So the voltage level
shouldn't be a problem. However in [2] (page 24, table 10.
"Operating Ranges"), it is not mentioned that 792MHz OPP isn't
allowed. Change it to only disable 792MHz OPP for i.MX6ULL types
below 792 MHz.
[1] https://www.nxp.com/docs/en/data-sheet/IMX6ULLIEC.pdf
[2] https://www.nxp.com/docs/en/data-sheet/IMX6ULLCEC.pdf
Fixes: 0aa9abd4c2 ("cpufreq: imx6q: check speed grades for i.MX6ULL")
Signed-off-by: Christoph Niedermaier <cniedermaier@dh-electronics.com>
Reviewed-by: Marek Vasut <marex@denx.de>
Reviewed-by: Fabio Estevam <festevam@denx.de>
[ Viresh: Edited subject ]
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 11a3b0ac33 ]
It is confusing if a warning is given for disabling a non-existent
frequency of the operating performance points (OPP). In this case
the function dev_pm_opp_disable() returns -ENODEV. Check the return
value and avoid the output of a warning in this case. Avoid code
duplication by using a separate function.
Signed-off-by: Christoph Niedermaier <cniedermaier@dh-electronics.com>
[ Viresh : Updated commit subject ]
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Stable-dep-of: 2e4e0984c7 ("cpufreq: imx6q: Don't disable 792 Mhz OPP unnecessarily")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ea167a7fc2 ]
Commit 3c0897c180 ("cpufreq: Use scnprintf() for avoiding potential
buffer overflow") switched from snprintf to the more secure scnprintf
but never updated the exit condition for PAGE_SIZE.
As the commit say and as scnprintf document, what scnprintf returns what
is actually written not counting the '\0' end char. This results in the
case of len exceeding the size, len set to PAGE_SIZE - 1, as it can be
written at max PAGE_SIZE - 1 (as '\0' is not counted)
Because of len is never set to PAGE_SIZE, the function never break early,
never prints the warning and never return -EFBIG.
Fix this by changing the condition to PAGE_SIZE - 1 to correctly trigger
the error.
Cc: 5.10+ <stable@vger.kernel.org> # 5.10+
Fixes: 3c0897c180 ("cpufreq: Use scnprintf() for avoiding potential buffer overflow")
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
[ rjw: Subject and changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit e520d0b6be upstream.
Allocate extra space for terminating element at:
drivers/cpufreq/brcmstb-avs-cpufreq.c:
449 table[i].frequency = CPUFREQ_TABLE_END;
and add code comment to make this clear.
This fixes the following -Warray-bounds warning seen after building
ARM with multi_v7_defconfig (GCC 13):
In function 'brcm_avs_get_freq_table',
inlined from 'brcm_avs_cpufreq_init' at drivers/cpufreq/brcmstb-avs-cpufreq.c:623:15:
drivers/cpufreq/brcmstb-avs-cpufreq.c:449:28: warning: array subscript 5 is outside array bounds of 'void[60]' [-Warray-bounds=]
449 | table[i].frequency = CPUFREQ_TABLE_END;
In file included from include/linux/node.h:18,
from include/linux/cpu.h:17,
from include/linux/cpufreq.h:12,
from drivers/cpufreq/brcmstb-avs-cpufreq.c:44:
In function 'devm_kmalloc_array',
inlined from 'devm_kcalloc' at include/linux/device.h:328:9,
inlined from 'brcm_avs_get_freq_table' at drivers/cpufreq/brcmstb-avs-cpufreq.c:437:10,
inlined from 'brcm_avs_cpufreq_init' at drivers/cpufreq/brcmstb-avs-cpufreq.c:623:15:
include/linux/device.h:323:16: note: at offset 60 into object of size 60 allocated by 'devm_kmalloc'
323 | return devm_kmalloc(dev, bytes, flags);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
This helps with the ongoing efforts to tighten the FORTIFY_SOURCE
routines on memcpy() and help us make progress towards globally
enabling -Warray-bounds.
Link: https://github.com/KSPP/linux/issues/324
Fixes: de322e0859 ("cpufreq: brcmstb-avs-cpufreq: AVS CPUfreq driver for Broadcom STB SoCs")
Cc: stable@vger.kernel.org
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 61bfbf7951 ]
The field 'transition_task' of policy structure is used to track the
task which is performing the frequency transition. Using this field to
print a warning once detect a case where the same task is calling
_begin() again before completing the preivous frequency transition via
the _end().
However, there is a potential race condition in _end() and _begin() APIs
while updating the field 'transition_task' of policy, the scenario is
depicted below:
Task A Task B
/* 1st freq transition */
Invoke _begin() {
...
...
}
/* 2nd freq transition */
Invoke _begin() {
... //waiting for A to
... //clear
... //transition_ongoing
... //in _end() for
... //the 1st transition
|
Change the frequency |
|
Invoke _end() { |
... |
... |
transition_ongoing = false; V
transition_ongoing = true;
transition_task = current;
transition_task = NULL;
... //A overwrites the task
... //performing the transition
... //result in error warning.
}
To fix this race condition, the transition_lock of policy structure is
now acquired before updating policy structure in _end() API. Which ensure
that only one task can update the 'transition_task' field at a time.
Link: https://lore.kernel.org/all/b3c61d8a-d52d-3136-fbf0-d1de9f1ba411@huawei.com/
Fixes: ca654dc3a9 ("cpufreq: Catch double invocations of cpufreq_freq_transition_begin/end")
Signed-off-by: Liao Chang <liaochang1@huawei.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 03997da042 ]
Since the 'cpus' field of policy structure will become empty in the
cpufreq core API, it is better to use 'related_cpus' in the exit()
callback of driver.
Fixes: c3274763bf ("cpufreq: powernow-k8: Initialize per-cpu data-structures properly")
Signed-off-by: Liao Chang <liaochang1@huawei.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit e8a0e30b74 upstream.
After making acpi_processor_get_platform_limit() use the "no limit"
value for its frequency QoS request when _PPC returns 0, it is not
necessary to replace the frequency corresponding to the first _PSS
return package entry with the maximum turbo frequency of the given
CPU in intel_pstate_init_acpi_perf_limits() any more, so drop the
code doing that along with the comment explaining it.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Tested-by: Hagar Hemdan <hagarhem@amazon.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 03f44ffb3d ]
If the intel_pstate driver is set to passive mode, then writing the
same value to the energy_performance_preference sysfs twice will fail.
This is caused by the wrong return value used (index of the matched
energy_perf_string), instead of the length of the passed in parameter.
Fix by forcing the internal return value to zero when the same
preference is passed in by user. This same issue is not present when
active mode is used for the driver.
Fixes: f6ebbcf08f ("cpufreq: intel_pstate: Implement passive mode with HWP enabled")
Reported-by: Niklas Neronin <niklas.neronin@intel.com>
Signed-off-by: Tero Kristo <tero.kristo@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 44295af501 ]
cpufreq_verify_current_freq checks() if the frequency returned by
the hardware has a slight delta with the valid frequency value
last set and returns "policy->cur" if the delta is within "1 MHz".
In the comparison, "policy->cur" is in "kHz" but it's compared
against HZ_PER_MHZ. So, the comparison range becomes "1 GHz".
Fix this by comparing against KHZ_PER_MHZ instead of HZ_PER_MHZ.
Fixes: f55ae08c89 ("cpufreq: Avoid unnecessary frequency updates due to mismatch")
Signed-off-by: Sanjay Chandrashekara <sanjayc@nvidia.com>
[ sumit gupta: Commit message update ]
Signed-off-by: Sumit Gupta <sumitg@nvidia.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit a85ee6401a upstream.
The struct dbs_data embeds a struct gov_attr_set and
the struct gov_attr_set embeds a kobject. Since every kobject must have
a release() method and we can't use kfree() to free it directly,
so introduce cpufreq_dbs_data_release() to release the dbs_data via
the kobject::release() method. This fixes the calltrace like below:
ODEBUG: free active (active state 0) object type: timer_list hint: delayed_work_timer_fn+0x0/0x34
WARNING: CPU: 12 PID: 810 at lib/debugobjects.c:505 debug_print_object+0xb8/0x100
Modules linked in:
CPU: 12 PID: 810 Comm: sh Not tainted 5.16.0-next-20220120-yocto-standard+ #536
Hardware name: Marvell OcteonTX CN96XX board (DT)
pstate: 60400009 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : debug_print_object+0xb8/0x100
lr : debug_print_object+0xb8/0x100
sp : ffff80001dfcf9a0
x29: ffff80001dfcf9a0 x28: 0000000000000001 x27: ffff0001464f0000
x26: 0000000000000000 x25: ffff8000090e3f00 x24: ffff80000af60210
x23: ffff8000094dfb78 x22: ffff8000090e3f00 x21: ffff0001080b7118
x20: ffff80000aeb2430 x19: ffff800009e8f5e0 x18: 0000000000000000
x17: 0000000000000002 x16: 00004d62e58be040 x15: 013590470523aff8
x14: ffff8000090e1828 x13: 0000000001359047 x12: 00000000f5257d14
x11: 0000000000040591 x10: 0000000066c1ffea x9 : ffff8000080d15e0
x8 : ffff80000a1765a8 x7 : 0000000000000000 x6 : 0000000000000001
x5 : ffff800009e8c000 x4 : ffff800009e8c760 x3 : 0000000000000000
x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffff0001474ed040
Call trace:
debug_print_object+0xb8/0x100
__debug_check_no_obj_freed+0x1d0/0x25c
debug_check_no_obj_freed+0x24/0xa0
kfree+0x11c/0x440
cpufreq_dbs_governor_exit+0xa8/0xac
cpufreq_exit_governor+0x44/0x90
cpufreq_set_policy+0x29c/0x570
store_scaling_governor+0x110/0x154
store+0xb0/0xe0
sysfs_kf_write+0x58/0x84
kernfs_fop_write_iter+0x12c/0x1c0
new_sync_write+0xf0/0x18c
vfs_write+0x1cc/0x220
ksys_write+0x74/0x100
__arm64_sys_write+0x28/0x3c
invoke_syscall.constprop.0+0x58/0xf0
do_el0_svc+0x70/0x170
el0_svc+0x54/0x190
el0t_64_sync_handler+0xa4/0x130
el0t_64_sync+0x1a0/0x1a4
irq event stamp: 189006
hardirqs last enabled at (189005): [<ffff8000080849d0>] finish_task_switch.isra.0+0xe0/0x2c0
hardirqs last disabled at (189006): [<ffff8000090667a4>] el1_dbg+0x24/0xa0
softirqs last enabled at (188966): [<ffff8000080106d0>] __do_softirq+0x4b0/0x6a0
softirqs last disabled at (188957): [<ffff80000804a618>] __irq_exit_rcu+0x108/0x1a4
[ rjw: Because can be freed by the gov_attr_set_put() in
cpufreq_dbs_governor_exit() now, it is also necessary to put the
invocation of the governor ->exit() callback into the new
cpufreq_dbs_data_release() function. ]
Fixes: c443563036 ("cpufreq: governor: New sysfs show/store callbacks for governor tunables")
Signed-off-by: Kevin Hao <haokexin@gmail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ae26508651 upstream.
So it can be reused by other codes.
Signed-off-by: Kevin Hao <haokexin@gmail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 08f0adb193 ]
Use NULL for NULL pointer to fix the following sparse warning:
drivers/cpufreq/armada-37xx-cpufreq.c:448:32: sparse: warning: Using plain integer as NULL pointer
Signed-off-by: Miles Chen <miles.chen@mediatek.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit faf28e240d ]
The Qualcomm SM6375 platform uses the qcom-cpufreq-hw driver, so add
it to the cpufreq-dt-platdev driver's blocklist.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 01c5bb0cc2 ]
Tegra234 platform uses the tegra194-cpufreq driver, so add it
to the blocklist in cpufreq-dt-platdev driver to avoid the cpufreq
driver registration from there.
Signed-off-by: Sumit Gupta <sumitg@nvidia.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 5c51054896 upstream.
In cpufreq_policy_alloc(), it will call uninitialed completion in
cpufreq_sysfs_release() when kobject_init_and_add() fails. And
that will cause a crash such as the following page fault in complete:
BUG: unable to handle page fault for address: fffffffffffffff8
[..]
RIP: 0010:complete+0x98/0x1f0
[..]
Call Trace:
kobject_put+0x1be/0x4c0
cpufreq_online.cold+0xee/0x1fd
cpufreq_add_dev+0x183/0x1e0
subsys_interface_register+0x3f5/0x4e0
cpufreq_register_driver+0x3b7/0x670
acpi_cpufreq_init+0x56c/0x1000 [acpi_cpufreq]
do_one_initcall+0x13d/0x780
do_init_module+0x1c3/0x630
load_module+0x6e67/0x73b0
__do_sys_finit_module+0x181/0x240
do_syscall_64+0x35/0x80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
Fixes: 4ebe36c94a ("cpufreq: Fix kobject memleak")
Signed-off-by: Yongqiang Liu <liuyongqiang13@huawei.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Cc: 5.2+ <stable@vger.kernel.org> # 5.2+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 91fda1f88c ]
pci_get_device() will increase the reference count for the returned
pci_dev. We need to use pci_dev_put() to decrease the reference count
after using pci_get_device(). Let's add it.
Fixes: 59a3b3a8db ("cpufreq: AMD: Ignore the check for ProcFeedback in ST/CZ")
Signed-off-by: Xiongfeng Wang <wangxiongfeng2@huawei.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9901c21bca ]
If "cpu_dev" fails to get opp table in qcom_cpufreq_hw_read_lut(),
the program will return, resulting in "table" resource is not released.
Fixes: 51c843cf77 ("cpufreq: qcom: Update the bandwidth levels on frequency change")
Signed-off-by: Chen Hui <judy.chenhui@huawei.com>
Reviewed-by: Sibi Sankar <quic_sibis@quicinc.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit f5c8cf2a49 upstream.
Commit 46573fd636 ("cpufreq: intel_pstate: hybrid: Rework HWP
calibration") attempted to use the information from CPPC (the nominal
performance in particular) to obtain the scaling factor allowing the
frequency to be computed if the HWP performance level of the given CPU
is known or vice versa.
However, it turns out that on some platforms this doesn't work, because
the CPPC information on them does not align with the contents of the
MSR_HWP_CAPABILITIES registers.
This basically means that the only way to make intel_pstate work on all
of the hybrid platforms to date is to use the observation that on all
of them the scaling factor between the HWP performance levels and
frequency for P-cores is 78741 (approximately 100000/1.27). For
E-cores it is 100000, which is the same as for all of the non-hybrid
"core" platforms and does not require any changes.
Accordingly, make intel_pstate use 78741 as the scaling factor between
HWP performance levels and frequency for P-cores on all hybrid platforms
and drop the dependency of the HWP calibration code on CPPC.
Fixes: 46573fd636 ("cpufreq: intel_pstate: hybrid: Rework HWP calibration")
Reported-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Tested-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Cc: 5.15+ <stable@vger.kernel.org> # 5.15+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8dbab94d45 upstream.
Some of the MSR accesses in intel_pstate are carried out on the CPU
that is running the code, but the values coming from them are used
for the performance scaling of the other CPUs.
This is problematic, for example, on hybrid platforms where
MSR_TURBO_RATIO_LIMIT for P-cores and E-cores is different, so the
values read from it on a P-core are generally not applicable to E-cores
and the other way around.
For this reason, make the driver access all MSRs on the target CPU on
platforms using the "core" pstate_funcs callbacks which is the case for
all of the hybrid platforms released to date. For this purpose, pass
a CPU argument to the ->get_max(), ->get_max_physical(), ->get_min()
and ->get_turbo() pstate_funcs callbacks and from there pass it to
rdmsrl_on_cpu() or rdmsrl_safe_on_cpu() to access the MSR on the target
CPU.
Fixes: 46573fd636 ("cpufreq: intel_pstate: hybrid: Rework HWP calibration")
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Tested-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Cc: 5.15+ <stable@vger.kernel.org> # 5.15+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 9f42cf5440 upstream.
If for some reason the speedbin length is incorrect, then there is a
memory leak in the error path because we never free the speedbin buffer.
This commit fixes the error path to always free the speedbin buffer.
Cc: v5.7+ <stable@vger.kernel.org> # v5.7+
Fixes: a8811ec764 ("cpufreq: qcom: Add support for krait based socs")
Signed-off-by: Fabien Parent <fabien.parent@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 01039fb8e9 upstream.
This commit fixes a kernel oops because of a write in some read-only memory:
[ 9.068287] Unable to handle kernel write to read-only memory at virtual address ffff800009240ad8
..snip..
[ 9.138790] Internal error: Oops: 9600004f [#1] PREEMPT SMP
..snip..
[ 9.269161] Call trace:
[ 9.276271] __memcpy+0x5c/0x230
[ 9.278531] snprintf+0x58/0x80
[ 9.282002] qcom_cpufreq_msm8939_name_version+0xb4/0x190
[ 9.284869] qcom_cpufreq_probe+0xc8/0x39c
..snip..
The following line defines a pointer that point to a char buffer stored
in read-only memory:
char *pvs_name = "speedXX-pvsXX-vXX";
This pointer is meant to hold a template "speedXX-pvsXX-vXX" where the
XX values get overridden by the qcom_cpufreq_krait_name_version function. Since
the template is actually stored in read-only memory, when the function
executes the following call we get an oops:
snprintf(*pvs_name, sizeof("speedXX-pvsXX-vXX"), "speed%d-pvs%d-v%d",
speed, pvs, pvs_ver);
To fix this issue, we instead store the template name onto the stack by
using the following syntax:
char pvs_name_buffer[] = "speedXX-pvsXX-vXX";
Because the `pvs_name` needs to be able to be assigned to NULL, the
template buffer is stored in the pvs_name_buffer and not under the
pvs_name variable.
Cc: v5.7+ <stable@vger.kernel.org> # v5.7+
Fixes: a8811ec764 ("cpufreq: qcom: Add support for krait based socs")
Signed-off-by: Fabien Parent <fabien.parent@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 71bb5c82aa ]
Users may disable HWP in firmware, in which case intel_pstate wouldn't load
unless the CPU model is explicitly supported.
Add TIGERLAKE to the list of CPUs that can register intel_pstate while not
advertising the HWP capability. Without this change, an TIGERLAKE in no-HWP
mode could only use the acpi_cpufreq frequency scaling driver.
See also commits:
d8de7a44e1: cpufreq: intel_pstate: Add Skylake servers support
fbdc21e9b0: cpufreq: intel_pstate: Add Icelake servers support in no-HWP mode
706c532885: cpufreq: intel_pstate: Add Cometlake support in no-HWP mode
Reported by: M. Cargi Ari <cagriari@pm.me>
Signed-off-by: Doug Smythies <dsmythies@telus.net>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6ca7076fbf ]
There is no need to check if the cpufreq driver implements callback
cpufreq_driver::target_index. The logic in the __resolve_freq uses
the frequency table available in the policy. It doesn't matter if the
driver provides 'target_index' or 'target' callback. It just has to
populate the 'policy->freq_table'.
Thus, check only frequency table during the frequency resolving call.
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Lukasz Luba <lukasz.luba@arm.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ccd7567d4b ]
In pmac_cpufreq_init_MacRISC3(), we need to add corresponding
of_node_put() for the three node pointers whose refcount have
been incremented by of_find_node_by_name().
Signed-off-by: Liang He <windhl@126.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4ff5a9b6d9 ]
In qoriq_cpufreq_probe(), of_find_matching_node() will return a
node pointer with refcount incremented. We should use of_node_put()
when it is not used anymore.
Fixes: 157f527639 ("cpufreq: qoriq: convert to a platform driver")
[ Viresh: Fixed Author's name in commit log ]
Signed-off-by: Liang He <windhl@126.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f126fbadce ]
We register the platform device when driver inits. However, we do not
unregister it when driver exits.
To resolve this, we declare the platform data to be a global static
variable and rename it to be "cpufreq_pdev". With this global variable,
we can do platform_device_unregister() when driver exits.
Fixes: 501c574f4e ("cpufreq: mediatek: Add support of cpufreq to MT2701/MT7623 SoC")
Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com>
[ Viresh: Commit log and Subject ]
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b7070187c8 ]
- Use module_init instead of device_initcall.
- Add a function for module_exit to unregister driver.
Signed-off-by: Jia-Wei Chang <jia-wei.chang@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 85f0e42bd6 ]
This reverts commit f346e96267.
The commit tried to fix a possible real bug but it made it even worse.
The fix was simply buggy as now an error out to out_offline_policy or
out_exit_policy will try to release a semaphore which was never taken in
the first place. This works fine only if we failed late, i.e. via
out_destroy_policy.
Fixes: f346e96267 ("cpufreq: Fix possible race in cpufreq online error path")
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f346e96267 ]
When cpufreq online fails, the policy->cpus mask is not cleared and
policy->rwsem is released too early, so the driver can be invoked
via the cpuinfo_cur_freq sysfs attribute while its ->offline() or
->exit() callbacks are being run.
Take policy->clk as an example:
static int cpufreq_online(unsigned int cpu)
{
...
// policy->cpus != 0 at this time
down_write(&policy->rwsem);
ret = cpufreq_add_dev_interface(policy);
up_write(&policy->rwsem);
return 0;
out_destroy_policy:
for_each_cpu(j, policy->real_cpus)
remove_cpu_dev_symlink(policy, get_cpu_device(j));
up_write(&policy->rwsem);
...
out_exit_policy:
if (cpufreq_driver->exit)
cpufreq_driver->exit(policy);
clk_put(policy->clk);
// policy->clk is a wild pointer
...
^
|
Another process access
__cpufreq_get
cpufreq_verify_current_freq
cpufreq_generic_get
// acces wild pointer of policy->clk;
|
|
out_offline_policy: |
cpufreq_policy_free(policy); |
// deleted here, and will wait for no body reference
cpufreq_policy_put_kobj(policy);
}
Address this by modifying cpufreq_online() to release policy->rwsem
in the error path after the driver callbacks have run and to clear
policy->cpus before releasing the semaphore.
Fixes: 7106e02bae ("cpufreq: release policy->rwsem on error")
Signed-off-by: Schspa Shi <schspa@gmail.com>
[ rjw: Subject and changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f55ae08c89 ]
For some platforms, the frequency returned by hardware may be slightly
different from what is provided in the frequency table. For example,
hardware may return 499 MHz instead of 500 MHz. In such cases it is
better to avoid getting into unnecessary frequency updates, as we may
end up switching policy->cur between the two and sending unnecessary
pre/post update notifications, etc.
This patch has chosen allows the hardware frequency and table frequency
to deviate by 1 MHz for now, we may want to increase it a bit later on
if someone still complains.
Reported-by: Rex-BC Chen <rex-bc.chen@mediatek.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Tested-by: Jia-wei Chang <jia-wei.chang@mediatek.com>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e4e6448638 ]
It's noted that dcvs interrupts are not self-clearing, thus an interrupt
handler runs constantly, which leads to a severe regression in runtime.
To fix the problem an explicit write to clear interrupt register is
required, note that on OSM platforms the register may not be present.
Fixes: 275157b367 ("cpufreq: qcom-cpufreq-hw: Add dcvs interrupt support")
Signed-off-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f84ccad5f5 ]
On QCOM platforms with EPSS flavour of cpufreq IP a throttled frequency is
obtained from another register REG_DOMAIN_STATE, thus the helper function
qcom_lmh_get_throttle_freq() should be modified accordingly, as for now
it returns gibberish since .reg_current_vote is unset for EPSS hardware.
To exclude a hardcoded magic number 19200 it is replaced by "xo" clock rate
in KHz.
Fixes: 275157b367 ("cpufreq: qcom-cpufreq-hw: Add dcvs interrupt support")
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
