[ Upstream commit bf52d7f9b2 ]
I didn't pay close enough attention the last time I tried to fix this
problem - while we currently do correctly take care to make sure we don't
probe a connected eDP port more then once, we don't do the same thing for
eDP ports we found to be disconnected.
So, fix this and make sure we only ever probe eDP ports once and then leave
them at that connector state forever (since without HPD, it's not going to
change on its own anyway). This should get rid of the last few GSP errors
getting spit out during runtime suspend and resume on some machines, as we
tried to reprobe eDP ports in response to ACPI hotplug probe events.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240404233736.7946-3-lyude@redhat.com
(cherry picked from commit fe6660b661)
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6f63af7511 ]
We don't need to hold the prepare_lock when dropping a ref on a struct
clk_core. The release function is only freeing memory and any code with
a pointer reference has already unlinked anything pointing to the
clk_core. This reduces the holding area of the prepare_lock a bit.
Note that we also don't call free_clk() with the prepare_lock held.
There isn't any reason to do that.
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Link: https://lore.kernel.org/r/20240325184204.745706-3-sboyd@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ace0ebe5c9 ]
The GPIO library expects the drivers to return -ENOTSUPP in some
cases and not using analogue POSIX code. Make the driver to follow
this.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0c3b532ad3 ]
The GPIO library expects the drivers to return -ENOTSUPP in some
cases and not using analogue POSIX code. Make the driver to follow
this.
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7a84602297 ]
9p is a remote network protocol, and it doesn't support asynchronous
notifications from the server. Ensure that we don't hand out any leases
since we can't guarantee they'll be broken when a file's contents
change.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Eric Van Hensbergen <ericvh@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 87de39e705 ]
This one hits both 9P2000 and .u as it appears v9fs has never translated
the O_TRUNC flag.
Signed-off-by: Joakim Sindholt <opensource@zhasha.com>
Signed-off-by: Eric Van Hensbergen <ericvh@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cd25e15e57 ]
Garbage in plain 9P2000's perm bits is allowed through, which causes it
to be able to set (among others) the suid bit. This was presumably not
the intent since the unix extended bits are handled explicitly and
conditionally on .u.
Signed-off-by: Joakim Sindholt <opensource@zhasha.com>
Signed-off-by: Eric Van Hensbergen <ericvh@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7537e31df8 ]
Add MODULE_DEVICE_TABLE(), so modules could be properly autoloaded
based on the alias from of_device_id table.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20240410164109.233308-1-krzk@kernel.org
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0763613621 ]
The struct adjtimex freq field takes a signed value who's units are in
shifted (<<16) parts-per-million.
Unfortunately for negative adjustments, the straightforward use of:
freq = ppm << 16 trips undefined behavior warnings with clang:
valid-adjtimex.c:66:6: warning: shifting a negative signed value is undefined [-Wshift-negative-value]
-499<<16,
~~~~^
valid-adjtimex.c:67:6: warning: shifting a negative signed value is undefined [-Wshift-negative-value]
-450<<16,
~~~~^
..
Fix it by using a multiply by (1 << 16) instead of shifting negative values
in the valid-adjtimex test case. Align the values for better readability.
Reported-by: Lee Jones <joneslee@google.com>
Reported-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Signed-off-by: John Stultz <jstultz@google.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Link: https://lore.kernel.org/r/20240409202222.2830476-1-jstultz@google.com
Link: https://lore.kernel.org/lkml/0c6d4f0d-2064-4444-986b-1d1ed782135f@collabora.com/
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4370b673cc ]
thread_info.syscall is used by syscall_get_nr to supply syscall nr
over a thread stack frame.
Previously, thread_info.syscall is only saved at syscall_trace_enter
when syscall tracing is enabled. However rest of the kernel code do
expect syscall_get_nr to be available without syscall tracing. The
previous design breaks collect_syscall.
Move saving process to syscall entry to fix it.
Reported-by: Xi Ruoyao <xry111@xry111.site>
Link: https://github.com/util-linux/util-linux/issues/2867
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8ab58f6841 ]
The host1x devices are virtual compound devices and do not perform DMA
accesses themselves, so they do not need to be set up for DMA.
Ideally we would also not need to set up DMA masks for the virtual
devices, but we currently still need those for legacy support on old
hardware.
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Acked-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240314154943.2487549-1-thierry.reding@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit beaa51b360 ]
UBSAN catches undefined behavior in blk-iocost, where sometimes
iocg->delay is shifted right by a number that is too large,
resulting in undefined behavior on some architectures.
[ 186.556576] ------------[ cut here ]------------
UBSAN: shift-out-of-bounds in block/blk-iocost.c:1366:23
shift exponent 64 is too large for 64-bit type 'u64' (aka 'unsigned long long')
CPU: 16 PID: 0 Comm: swapper/16 Tainted: G S E N 6.9.0-0_fbk700_debug_rc2_kbuilder_0_gc85af715cac0 #1
Hardware name: Quanta Twin Lakes MP/Twin Lakes Passive MP, BIOS F09_3A23 12/08/2020
Call Trace:
<IRQ>
dump_stack_lvl+0x8f/0xe0
__ubsan_handle_shift_out_of_bounds+0x22c/0x280
iocg_kick_delay+0x30b/0x310
ioc_timer_fn+0x2fb/0x1f80
__run_timer_base+0x1b6/0x250
...
Avoid that undefined behavior by simply taking the
"delay = 0" branch if the shift is too large.
I am not sure what the symptoms of an undefined value
delay will be, but I suspect it could be more than a
little annoying to debug.
Signed-off-by: Rik van Riel <riel@surriel.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Josef Bacik <josef@toxicpanda.com>
Cc: Jens Axboe <axboe@kernel.dk>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20240404123253.0f58010f@imladris.surriel.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 97a54ef596 ]
If the systemd-modules service loads the target module, the credentials of
that userspace process will be used to validate the access to the target db
directory. SELinux will prevent it, reporting an error like the following:
kernel: audit: type=1400 audit(1676301082.205:4): avc: denied { read }
for pid=1020 comm="systemd-modules" name="target" dev="dm-3"
ino=4657583 scontext=system_u:system_r:systemd_modules_load_t:s0
tcontext=system_u:object_r:targetd_etc_rw_t:s0 tclass=dir permissive=0
Fix the error by using the kernel credentials to access the db directory
Signed-off-by: Maurizio Lombardi <mlombard@redhat.com>
Link: https://lore.kernel.org/r/20240215143944.847184-2-mlombard@redhat.com
Reviewed-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6e68de0bb0 ]
It is possible to clear a root's IN_TRANS tag from the radix tree, but
not clear its PERTRANS, if there is some error in between. Eliminate
that possibility by moving the free up to where we clear the tag.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Boris Burkov <boris@bur.io>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3c6f0c5ecc ]
Currently, this call site in btrfs_clear_delalloc_extent() only converts
the reservation. We are marking it not delalloc, so I don't think it
makes sense to keep the rsv around. This is a path where we are not
sure to join a transaction, so it leads to incorrect free-ing during
umount.
Helps with the pass rate of generic/269 and generic/475.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Boris Burkov <boris@bur.io>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0b13410b52 ]
The code calculates Bzy_MHz by multiplying TSC_delta * APERF_delta/MPERF_delta
The man page erroneously showed that TSC_delta was divided.
Signed-off-by: Peng Liu <liupeng17@lenovo.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 752e3c53de ]
In the FireWire OHCI interrupt handler, if a bus reset interrupt has
occurred, mask bus reset interrupts until bus_reset_work has serviced and
cleared the interrupt.
Normally, we always leave bus reset interrupts masked. We infer the bus
reset from the self-ID interrupt that happens shortly thereafter. A
scenario where we unmask bus reset interrupts was introduced in 2008 in
a007bb857e0b26f5d8b73c2ff90782d9c0972620: If
OHCI_PARAM_DEBUG_BUSRESETS (8) is set in the debug parameter bitmask, we
will unmask bus reset interrupts so we can log them.
irq_handler logs the bus reset interrupt. However, we can't clear the bus
reset event flag in irq_handler, because we won't service the event until
later. irq_handler exits with the event flag still set. If the
corresponding interrupt is still unmasked, the first bus reset will
usually freeze the system due to irq_handler being called again each
time it exits. This freeze can be reproduced by loading firewire_ohci
with "modprobe firewire_ohci debug=-1" (to enable all debugging output).
Apparently there are also some cases where bus_reset_work will get called
soon enough to clear the event, and operation will continue normally.
This freeze was first reported a few months after a007bb85 was committed,
but until now it was never fixed. The debug level could safely be set
to -1 through sysfs after the module was loaded, but this would be
ineffectual in logging bus reset interrupts since they were only
unmasked during initialization.
irq_handler will now leave the event flag set but mask bus reset
interrupts, so irq_handler won't be called again and there will be no
freeze. If OHCI_PARAM_DEBUG_BUSRESETS is enabled, bus_reset_work will
unmask the interrupt after servicing the event, so future interrupts
will be caught as desired.
As a side effect to this change, OHCI_PARAM_DEBUG_BUSRESETS can now be
enabled through sysfs in addition to during initial module loading.
However, when enabled through sysfs, logging of bus reset interrupts will
be effective only starting with the second bus reset, after
bus_reset_work has executed.
Signed-off-by: Adam Goldman <adamg@pobox.com>
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e85006ae74 ]
The call to clk_enable() in gemini_sata_start_bridge() can fail.
Add a check to detect such failure.
Signed-off-by: Chen Ni <nichen@iscas.ac.cn>
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0a6380cb4c ]
If the RBUF logic is not reset when the kernel starts then there
may be some data left over from any network boot loader. If the
64-byte packet headers are enabled then this can be fatal.
Extend bcmgenet_dma_disable to do perform the reset, but not when
called from bcmgenet_resume in order to preserve a wake packet.
N.B. This different handling of resume is just based on a hunch -
why else wouldn't one reset the RBUF as well as the TBUF? If this
isn't the case then it's easy to change the patch to make the RBUF
reset unconditional.
See: https://github.com/raspberrypi/linux/issues/3850
See: https://github.com/raspberrypi/firmware/issues/1882
Signed-off-by: Phil Elwell <phil@raspberrypi.com>
Signed-off-by: Maarten Vanraes <maarten@rmail.be>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c4e51e424e ]
For shutting up spurious KMSAN uninit-value warnings, just replace
kmalloc() calls with kzalloc() for the buffers used for
communications. There should be no real issue with the original code,
but it's still better to cover.
Reported-by: syzbot+7fb05ccf7b3d2f9617b3@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/r/00000000000084b18706150bcca5@google.com
Message-ID: <20240402063628.26609-1-tiwai@suse.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 54babdc034 ]
When KCSAN and CONSTRUCTORS are enabled, one can trigger the
"Unpatched return thunk in use. This should not happen!"
catch-all warning.
Usually, when objtool runs on the .o objects, it does generate a section
.return_sites which contains all offsets in the objects to the return
thunks of the functions present there. Those return thunks then get
patched at runtime by the alternatives.
KCSAN and CONSTRUCTORS add this to the object file's .text.startup
section:
-------------------
Disassembly of section .text.startup:
...
0000000000000010 <_sub_I_00099_0>:
10: f3 0f 1e fa endbr64
14: e8 00 00 00 00 call 19 <_sub_I_00099_0+0x9>
15: R_X86_64_PLT32 __tsan_init-0x4
19: e9 00 00 00 00 jmp 1e <__UNIQUE_ID___addressable_cryptd_alloc_aead349+0x6>
1a: R_X86_64_PLT32 __x86_return_thunk-0x4
-------------------
which, if it is built as a module goes through the intermediary stage of
creating a <module>.mod.c file which, when translated, receives a second
constructor:
-------------------
Disassembly of section .text.startup:
0000000000000010 <_sub_I_00099_0>:
10: f3 0f 1e fa endbr64
14: e8 00 00 00 00 call 19 <_sub_I_00099_0+0x9>
15: R_X86_64_PLT32 __tsan_init-0x4
19: e9 00 00 00 00 jmp 1e <_sub_I_00099_0+0xe>
1a: R_X86_64_PLT32 __x86_return_thunk-0x4
...
0000000000000030 <_sub_I_00099_0>:
30: f3 0f 1e fa endbr64
34: e8 00 00 00 00 call 39 <_sub_I_00099_0+0x9>
35: R_X86_64_PLT32 __tsan_init-0x4
39: e9 00 00 00 00 jmp 3e <__ksymtab_cryptd_alloc_ahash+0x2>
3a: R_X86_64_PLT32 __x86_return_thunk-0x4
-------------------
in the .ko file.
Objtool has run already so that second constructor's return thunk cannot
be added to the .return_sites section and thus the return thunk remains
unpatched and the warning rightfully fires.
Drop KCSAN flags from the mod.c generation stage as those constructors
do not contain data races one would be interested about.
Debugged together with David Kaplan <David.Kaplan@amd.com> and Nikolay
Borisov <nik.borisov@suse.com>.
Reported-by: Paul Menzel <pmenzel@molgen.mpg.de>
Closes: https://lore.kernel.org/r/0851a207-7143-417e-be31-8bf2b3afb57d@molgen.mpg.de
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Tested-by: Paul Menzel <pmenzel@molgen.mpg.de> # Dell XPS 13
Reviewed-by: Nikolay Borisov <nik.borisov@suse.com>
Reviewed-by: Marco Elver <elver@google.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2f1aeab9fc ]
When attempting to exclusive open a device which has no exclusive open
permission, such as a physical device associated with the flakey dm
device, the open operation will fail, resulting in a mount failure.
In this particular scenario, we erroneously return -EINVAL instead of the
correct error code provided by the bdev_open_by_path() function, which is
-EBUSY.
Fix this, by returning error code from the bdev_open_by_path() function.
With this correction, the mount error message will align with that of
ext4 and xfs.
Reviewed-by: Boris Burkov <boris@bur.io>
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c2deb2e971 ]
sk->sk_rcvbuf in __sock_queue_rcv_skb() and __sk_receive_skb() can be
changed by other threads. Mark this as benign using READ_ONCE().
This patch is aimed at reducing the number of benign races reported by
KCSAN in order to focus future debugging effort on harmful races.
Signed-off-by: linke li <lilinke99@qq.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ec50f3114e ]
Fix the order of arguments in the TP_ARGS macro
for the rdev_dump_mpp tracepoint event.
Found by Linux Verification Center (linuxtesting.org).
Signed-off-by: Igor Artemiev <Igor.A.Artemiev@mcst.ru>
Link: https://msgid.link/20240311164519.118398-1-Igor.A.Artemiev@mcst.ru
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 774f8841f5 ]
Running kernel-doc on ieee80211_i.h flagged the following:
net/mac80211/ieee80211_i.h:145: warning: expecting prototype for enum ieee80211_corrupt_data_flags. Prototype was for enum ieee80211_bss_corrupt_data_flags instead
net/mac80211/ieee80211_i.h:162: warning: expecting prototype for enum ieee80211_valid_data_flags. Prototype was for enum ieee80211_bss_valid_data_flags instead
Fix these warnings.
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://msgid.link/20240314-kdoc-ieee80211_i-v1-1-72b91b55b257@quicinc.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c95346ac91 ]
In punch_hole(), when the offset lies in the final block for a given
height, there is no hole to punch, but the maximum size check fails to
detect that. Consequently, punch_hole() will try to punch a hole beyond
the end of the metadata and fail. Fix the maximum size check.
Signed-off-by: Andrew Price <anprice@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d11272be49 ]
The ndlp object update in lpfc_nvme_unregister_port() should be protected
by the ndlp lock rather than hbalock.
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Link: https://lore.kernel.org/r/20240305200503.57317-6-justintee8345@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bb01163143 ]
Typically when an out of resource CQE status is detected, the
lpfc_ramp_down_queue_handler() logic is called to help reduce I/O load by
reducing an sdev's queue_depth.
However, the current lpfc_rampdown_queue_depth() logic does not help reduce
queue_depth. num_cmd_success is never updated and is always zero, which
means new_queue_depth will always be set to sdev->queue_depth. So,
new_queue_depth = sdev->queue_depth - new_queue_depth always sets
new_queue_depth to zero. And, scsi_change_queue_depth(sdev, 0) is
essentially a no-op.
Change the lpfc_ramp_down_queue_handler() logic to set new_queue_depth
equal to sdev->queue_depth subtracted from number of times num_rsrc_err was
incremented. If num_rsrc_err is >= sdev->queue_depth, then set
new_queue_depth equal to 1. Eventually, the frequency of Good_Status
frames will signal SCSI upper layer to auto increase the queue_depth back
to the driver default of 64 via scsi_handle_queue_ramp_up().
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Link: https://lore.kernel.org/r/20240305200503.57317-5-justintee8345@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4ddf01f2f1 ]
There are cases after NPIV deletion where the fabric switch still believes
the NPIV is logged into the fabric. This occurs when a vport is
unregistered before the Remove All DA_ID CT and LOGO ELS are sent to the
fabric.
Currently fc_remove_host(), which calls dev_loss_tmo for all D_IDs including
the fabric D_ID, removes the last ndlp reference and frees the ndlp rport
object. This sometimes causes the race condition where the final DA_ID and
LOGO are skipped from being sent to the fabric switch.
Fix by moving the fc_remove_host() and scsi_remove_host() calls after DA_ID
and LOGO are sent.
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Link: https://lore.kernel.org/r/20240305200503.57317-3-justintee8345@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6ddb4f372f ]
vgic_v2_parse_attr() is responsible for finding the vCPU that matches
the user-provided CPUID, which (of course) may not be valid. If the ID
is invalid, kvm_get_vcpu_by_id() returns NULL, which isn't handled
gracefully.
Similar to the GICv3 uaccess flow, check that kvm_get_vcpu_by_id()
actually returns something and fail the ioctl if not.
Cc: stable@vger.kernel.org
Fixes: 7d450e2821 ("KVM: arm/arm64: vgic-new: Add userland access to VGIC dist registers")
Reported-by: Alexander Potapenko <glider@google.com>
Tested-by: Alexander Potapenko <glider@google.com>
Reviewed-by: Alexander Potapenko <glider@google.com>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20240424173959.3776798-2-oliver.upton@linux.dev
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4e7728c81a ]
When parsing a GICv2 attribute that contains a cpuid, handle this
as the vcpu_id, not a vcpu_idx, as userspace cannot really know
the mapping between the two. For this, use kvm_get_vcpu_by_id()
instead of kvm_get_vcpu().
Take this opportunity to get rid of the pointless check against
online_vcpus, which doesn't make much sense either, and switch
to FIELD_GET as a way to extract the vcpu_id.
Reviewed-by: Zenghui Yu <yuzenghui@huawei.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230927090911.3355209-5-maz@kernel.org
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Stable-dep-of: 6ddb4f372f ("KVM: arm64: vgic-v2: Check for non-NULL vCPU in vgic_v2_parse_attr()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7e91ed763d ]
While PLL CPUX clock rate change when CPU is running from it works in
vast majority of cases, now and then it causes instability. This leads
to system crashes and other undefined behaviour. After a lot of testing
(30+ hours) while also doing a lot of frequency switches, we can't
observe any instability issues anymore when doing reparenting to stable
clock like 24 MHz oscillator.
Fixes: 524353ea48 ("clk: sunxi-ng: add support for the Allwinner H6 CCU")
Reported-by: Chad Wagner <wagnerch42@gmail.com>
Link: https://forum.libreelec.tv/thread/27295-orange-pi-3-lts-freezes/
Tested-by: Chad Wagner <wagnerch42@gmail.com>
Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Link: https://lore.kernel.org/r/20231013181712.2128037-1-jernej.skrabec@gmail.com
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5babae777c ]
GRO-GSO path is supposed to be transparent and as such L3 flush checks are
relevant to all UDP flows merging in GRO. This patch uses the same logic
and code from tcp_gro_receive, terminating merge if flush is non zero.
Fixes: e20cf8d3f1 ("udp: implement GRO for plain UDP sockets.")
Signed-off-by: Richard Gobert <richardbgobert@gmail.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit da85f0aaa9 ]
In one case the -1 is returned which is quite confusing code for
the wrong device ID, in another the ret is returning instead of
plain 0 that also confusing as readed may ask the possible meaning
of positive codes, which are never the case there. Convert both
to use explicit predefined error codes to make it clear what's going
on there.
Fixes: 5a04227326 ("drm/panel: Add ilitek ili9341 panel driver")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Sui Jingfeng <sui.jingfeng@linux.dev>
Link: https://lore.kernel.org/r/20240425142706.2440113-4-andriy.shevchenko@linux.intel.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240425142706.2440113-4-andriy.shevchenko@linux.intel.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 740fc1e050 ]
GPIO controller might not be available when driver is being probed.
There are plenty of reasons why, one of which is deferred probe.
Since GPIOs are optional, return any error code we got to the upper
layer, including deferred probe. With that in mind, use dev_err_probe()
in order to avoid spamming the logs.
Fixes: 5a04227326 ("drm/panel: Add ilitek ili9341 panel driver")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Sui Jingfeng <sui.jingfeng@linux.dev>
Link: https://lore.kernel.org/r/20240425142706.2440113-3-andriy.shevchenko@linux.intel.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240425142706.2440113-3-andriy.shevchenko@linux.intel.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8a2e4d37af ]
Symptom:
When the hsuid attribute is set for the first time on an IQD Layer3
device while the corresponding network interface is already UP,
the kernel will try to execute a napi function pointer that is NULL.
Example:
---------------------------------------------------------------------------
[ 2057.572696] illegal operation: 0001 ilc:1 [#1] SMP
[ 2057.572702] Modules linked in: af_iucv qeth_l3 zfcp scsi_transport_fc sunrpc nft_fib_inet nft_fib_ipv4 nft_fib_ipv6 nft_fib nft_reject_inet nf_reject_ipv4 nf_reject_ipv6
nft_reject nft_ct nf_tables_set nft_chain_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 ip_set nf_tables libcrc32c nfnetlink ghash_s390 prng xts aes_s390 des_s390 de
s_generic sha3_512_s390 sha3_256_s390 sha512_s390 vfio_ccw vfio_mdev mdev vfio_iommu_type1 eadm_sch vfio ext4 mbcache jbd2 qeth_l2 bridge stp llc dasd_eckd_mod qeth dasd_mod
qdio ccwgroup pkey zcrypt
[ 2057.572739] CPU: 6 PID: 60182 Comm: stress_client Kdump: loaded Not tainted 4.18.0-541.el8.s390x #1
[ 2057.572742] Hardware name: IBM 3931 A01 704 (LPAR)
[ 2057.572744] Krnl PSW : 0704f00180000000 0000000000000002 (0x2)
[ 2057.572748] R:0 T:1 IO:1 EX:1 Key:0 M:1 W:0 P:0 AS:3 CC:3 PM:0 RI:0 EA:3
[ 2057.572751] Krnl GPRS: 0000000000000004 0000000000000000 00000000a3b008d8 0000000000000000
[ 2057.572754] 00000000a3b008d8 cb923a29c779abc5 0000000000000000 00000000814cfd80
[ 2057.572756] 000000000000012c 0000000000000000 00000000a3b008d8 00000000a3b008d8
[ 2057.572758] 00000000bab6d500 00000000814cfd80 0000000091317e46 00000000814cfc68
[ 2057.572762] Krnl Code:#0000000000000000: 0000 illegal
>0000000000000002: 0000 illegal
0000000000000004: 0000 illegal
0000000000000006: 0000 illegal
0000000000000008: 0000 illegal
000000000000000a: 0000 illegal
000000000000000c: 0000 illegal
000000000000000e: 0000 illegal
[ 2057.572800] Call Trace:
[ 2057.572801] ([<00000000ec639700>] 0xec639700)
[ 2057.572803] [<00000000913183e2>] net_rx_action+0x2ba/0x398
[ 2057.572809] [<0000000091515f76>] __do_softirq+0x11e/0x3a0
[ 2057.572813] [<0000000090ce160c>] do_softirq_own_stack+0x3c/0x58
[ 2057.572817] ([<0000000090d2cbd6>] do_softirq.part.1+0x56/0x60)
[ 2057.572822] [<0000000090d2cc60>] __local_bh_enable_ip+0x80/0x98
[ 2057.572825] [<0000000091314706>] __dev_queue_xmit+0x2be/0xd70
[ 2057.572827] [<000003ff803dd6d6>] afiucv_hs_send+0x24e/0x300 [af_iucv]
[ 2057.572830] [<000003ff803dd88a>] iucv_send_ctrl+0x102/0x138 [af_iucv]
[ 2057.572833] [<000003ff803de72a>] iucv_sock_connect+0x37a/0x468 [af_iucv]
[ 2057.572835] [<00000000912e7e90>] __sys_connect+0xa0/0xd8
[ 2057.572839] [<00000000912e9580>] sys_socketcall+0x228/0x348
[ 2057.572841] [<0000000091514e1a>] system_call+0x2a6/0x2c8
[ 2057.572843] Last Breaking-Event-Address:
[ 2057.572844] [<0000000091317e44>] __napi_poll+0x4c/0x1d8
[ 2057.572846]
[ 2057.572847] Kernel panic - not syncing: Fatal exception in interrupt
-------------------------------------------------------------------------------------------
Analysis:
There is one napi structure per out_q: card->qdio.out_qs[i].napi
The napi.poll functions are set during qeth_open().
Since
commit 1cfef80d4c ("s390/qeth: Don't call dev_close/dev_open (DOWN/UP)")
qeth_set_offline()/qeth_set_online() no longer call dev_close()/
dev_open(). So if qeth_free_qdio_queues() cleared
card->qdio.out_qs[i].napi.poll while the network interface was UP and the
card was offline, they are not set again.
Reproduction:
chzdev -e $devno layer2=0
ip link set dev $network_interface up
echo 0 > /sys/bus/ccwgroup/devices/0.0.$devno/online
echo foo > /sys/bus/ccwgroup/devices/0.0.$devno/hsuid
echo 1 > /sys/bus/ccwgroup/devices/0.0.$devno/online
-> Crash (can be enforced e.g. by af_iucv connect(), ip link down/up, ...)
Note that a Completion Queue (CQ) is only enabled or disabled, when hsuid
is set for the first time or when it is removed.
Workarounds:
- Set hsuid before setting the device online for the first time
or
- Use chzdev -d $devno; chzdev $devno hsuid=xxx; chzdev -e $devno;
to set hsuid on an existing device. (this will remove and recreate the
network interface)
Fix:
There is no need to free the output queues when a completion queue is
added or removed.
card->qdio.state now indicates whether the inbound buffer pool and the
outbound queues are allocated.
card->qdio.c_q indicates whether a CQ is allocated.
Fixes: 1cfef80d4c ("s390/qeth: Don't call dev_close/dev_open (DOWN/UP)")
Signed-off-by: Alexandra Winter <wintera@linux.ibm.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240430091004.2265683-1-wintera@linux.ibm.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit dc15012bb0 ]
The only actual user of qdio.no_input_queues is qeth_qdio_establish(),
and there we already have full awareness of the current Input Queue
configuration (1 RX queue, plus potentially 1 TX Completion queue).
So avoid this state tracking, and the ambiguity it brings with it.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Stable-dep-of: 8a2e4d37af ("s390/qeth: Fix kernel panic after setting hsuid")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 97bf6f81b2 ]
__skb_linearize() doesn't free the skb when it fails, so move
'*buf = NULL' after __skb_linearize(), so that the skb can be
freed on the err path.
Fixes: b7df21cf1b ("tipc: skb_linearize the head skb when reassembling msgs")
Reported-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Tung Nguyen <tung.q.nguyen@dektech.com.au>
Link: https://lore.kernel.org/r/90710748c29a1521efac4f75ea01b3b7e61414cf.1714485818.git.lucien.xin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d091e579b8 ]
SKB_GSO_FRAGLIST skbs must not be linearized, otherwise they become
invalid. Return NULL if such an skb is passed to skb_copy or
skb_copy_expand, in order to prevent a crash on a potential later
call to skb_gso_segment.
Fixes: 3a1296a38d ("net: Support GRO/GSO fraglist chaining.")
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 59c878cbcd ]
Calling skb_copy on a SKB_GSO_FRAGLIST skb is not valid, since it returns
an invalid linearized skb. This code only needs to change the ethernet
header, so pskb_copy is the right function to call here.
Fixes: 6db6f0eae6 ("bridge: multicast to unicast")
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b9a61c2017 ]
The Topaz family (88E6141 and 88E6341) only support 256 Forwarding
Information Tables.
Fixes: a75961d0eb ("net: dsa: mv88e6xxx: Add support for ethernet switch 88E6341")
Fixes: 1558727a1c ("net: dsa: mv88e6xxx: Add support for ethernet switch 88E6141")
Signed-off-by: Marek Behún <kabel@kernel.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://lore.kernel.org/r/20240429133832.9547-1-kabel@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9067eccdd7 ]
The selftest for the driver sends a dummy packet and checks if the
packet will be received properly as it should be. The regular TX path
and the selftest can use the same network queue so locking is required
and was missing in the selftest path. This was addressed in the commit
cited below.
Unfortunately locking the TX queue requires BH to be disabled which is
not the case in selftest path which is invoked in process context.
Lockdep should be complaining about this.
Use __netif_tx_lock_bh() for TX queue locking.
Fixes: c650e04898 ("cxgb4: Fix race between loopback and normal Tx path")
Reported-by: "John B. Wyatt IV" <jwyatt@redhat.com>
Closes: https://lore.kernel.org/all/Zic0ot5aGgR-V4Ks@thinkpad2021/
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Link: https://lore.kernel.org/r/20240429091147.YWAaal4v@linutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit da7c622cdd ]
Currently, we allocate a lbuf-sized kernel buffer and copy lbuf from
userspace to that buffer. Later, we use scanf on this buffer but we don't
ensure that the string is terminated inside the buffer, this can lead to
OOB read when using scanf. Fix this issue by using memdup_user_nul instead.
Fixes: a4f17cc726 ("s390/cio: add CRW inject functionality")
Signed-off-by: Bui Quang Minh <minhquangbui99@gmail.com>
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Link: https://lore.kernel.org/r/20240424-fix-oob-read-v2-5-f1f1b53a10f4@gmail.com
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c158cf9147 ]
The documentation for device_get_named_child_node() mentions this
important point:
"
The caller is responsible for calling fwnode_handle_put() on the
returned fwnode pointer.
"
Add fwnode_handle_put() to avoid a leaked reference.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Fixes: 08c2a4bc9f ("ALSA: hda: move Intel SoundWire ACPI scan to dedicated module")
Message-ID: <20240426152731.38420-1-pierre-louis.bossart@linux.intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6db26f9ea4 ]
Amlogic sound cards do create a lot of pcm interfaces, possibly more than
8. Some pcm interfaces are internal (like DPCM backends and c2c) and not
exposed to userspace.
Those interfaces still increase the number passed to snd_find_free_minor(),
which eventually exceeds 8 causing -EBUSY error on card registration if
CONFIG_SND_DYNAMIC_MINORS=n and the interface is exposed to userspace.
select CONFIG_SND_DYNAMIC_MINORS for Amlogic cards to avoid the problem.
Fixes: 7864a79f37 ("ASoC: meson: add axg sound card support")
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Link: https://lore.kernel.org/r/20240426134150.3053741-1-jbrunet@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bf5e4887ee ]
So far, the formatters have been reset/enabled using the .prepare()
callback. This was done in this callback because walking the formatters use
a mutex so it could not be done in .trigger(), which is atomic by default.
It turns out there is a problem on capture path of the AXG series.
The FIFO may get out of sync with the TDM decoder if the IP are not enabled
in a specific order. The FIFO must be enabled before the formatter starts
producing data. IOW, we must deal with FE before the BE. The .prepare()
callback is called on the BEs before the FE so it is not OK for the AXG.
The .trigger() callback order can be configured, and it deals with the FE
before the BEs by default. To solve our problem, we just need to start and
stop the formatters from the .trigger() callback. It is OK do so now that
the links have been made 'nonatomic' in the card driver.
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Link: https://lore.kernel.org/r/20211020114217.133153-3-jbrunet@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e138233e56 ]
Non atomic operations need to be performed in the trigger callback
of the TDM interfaces. Those are BEs but what matters is the nonatomic
flag of the FE in the DPCM context. Just set nonatomic for everything so,
at least, it is clear.
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Link: https://lore.kernel.org/r/20211020114217.133153-2-jbrunet@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Lyude Paul