Here are the USB-serial updates for 5.11-rc1, including:
- keyspan_pda write-implementation fixes
- digi_acceleport write-wakeup fix
- mos7720 parport-restore fix
- mos7720 parport-tasklet removal
- cp210x termios-handling cleanups
- option device-flag fix
- ftdi_sio GPIO CBUS-configuration improvements
- removal of in_interrupt() uses
Included are also various clean ups.
All have been in linux-next with no reported issues.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQHbPq+cpGvN/peuzMLxc3C7H1lCAUCX9OIiQAKCRALxc3C7H1l
CA1OAQCZVi5abi2R/+Rr3V9/iYOA/VJXJ6Mxg8xDbt3GWmp0lQD9G4z0Ws4f1RY1
ACEcOBNQedpoxXa/o3eb8tlAjObwAwg=
=udri
-----END PGP SIGNATURE-----
Merge tag 'usb-serial-5.11-rc1' of https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-next
Johan writes:
USB-serial updates for 5.11-rc1
Here are the USB-serial updates for 5.11-rc1, including:
- keyspan_pda write-implementation fixes
- digi_acceleport write-wakeup fix
- mos7720 parport-restore fix
- mos7720 parport-tasklet removal
- cp210x termios-handling cleanups
- option device-flag fix
- ftdi_sio GPIO CBUS-configuration improvements
- removal of in_interrupt() uses
Included are also various clean ups.
All have been in linux-next with no reported issues.
* tag 'usb-serial-5.11-rc1' of https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial: (30 commits)
USB: serial: ftdi_sio: log the CBUS GPIO validity
USB: serial: ftdi_sio: drop GPIO line checking dead code
USB: serial: ftdi_sio: report the valid GPIO lines to gpiolib
USB: serial: option: add interface-number sanity check to flag handling
USB: serial: cp210x: clean up dtr_rts()
USB: serial: cp210x: refactor flow-control handling
USB: serial: cp210x: drop flow-control debugging
USB: serial: cp210x: set terminal settings on open
USB: serial: cp210x: clean up line-control handling
USB: serial: cp210x: return early on unchanged termios
USB: serial: mos7720: defer state restore to a workqueue
USB: serial: mos7720: fix parallel-port state restore
USB: serial: remove write wait queue
USB: serial: digi_acceleport: fix write-wakeup deadlocks
USB: serial: keyspan_pda: drop redundant usb-serial pointer
USB: serial: keyspan_pda: use BIT() macro
USB: serial: keyspan_pda: clean up comments and whitespace
USB: serial: keyspan_pda: clean up xircom/entrega support
USB: serial: keyspan_pda: add write-fifo support
USB: serial: keyspan_pda: increase transmitter threshold
...
Commit 7ecdea4a02 ("backlight: generic_bl: Remove this driver as it is
unused") removed geenric_bl driver from the tree, together with
corresponding config option.
Remove BACKLIGHT_GENERIC config item from all ARM configurations.
Fixes: 7ecdea4a02 ("backlight: generic_bl: Remove this driver as it is unused")
Signed-off-by: Andrey Zhizhikin <andrey.zhizhikin@leica-geosystems.com>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Acked-by: Daniel Thompson <daniel.thompson@linaro.org>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Link: https://lore.kernel.org/r/20201201222922.3183-2-andrey.zhizhikin@leica-geosystems.com'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
please pull the following:
- Florian enables the ARM SCMI protocol, and the common clock, HWMON and
CPU frequency scaling drivers since those are used by ARCH_BRCMSTB
platforms
-----BEGIN PGP SIGNATURE-----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=k8ev
-----END PGP SIGNATURE-----
Merge tag 'arm-soc/for-5.11/defconfig' of https://github.com/Broadcom/stblinux into arm/defconfig
This pull request contains ARM multi_v7_defconfig changes for 5.11,
please pull the following:
- Florian enables the ARM SCMI protocol, and the common clock, HWMON and
CPU frequency scaling drivers since those are used by ARCH_BRCMSTB
platforms
* tag 'arm-soc/for-5.11/defconfig' of https://github.com/Broadcom/stblinux:
ARM: multi_v7_defconfig: Enable ARM SCMI protocol and drivers
Link: https://lore.kernel.org/r/20201128163410.1691529-1-f.fainelli@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQRcEzekXsqa64kGDp7j7w1vZxhRxQUCX8IzEwAKCRDj7w1vZxhR
xVV7AQDpi1at4B5ETX/Nk562XUN60Ddt2OmYeH+mBoWUkecDEAEA+/HtJT7/5Sx1
ew24utZ15sZiEQIndYx/UJrTSoZ29ws=
=EVMX
-----END PGP SIGNATURE-----
Merge tag 'sunxi-config-for-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into arm/defconfig
One patch to add the Realtek PHY driver to sunxi_defconfig
* tag 'sunxi-config-for-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
ARM: configs: sunxi: enable Realtek PHY
Link: https://lore.kernel.org/r/dffb8a7e-27ea-4025-868a-caa5868eb1ef.lettre@localhost
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
GTA04 uses that for controlling the td028ttec1 panel. So
for easier testing/bisecting it is useful to have it
enabled in the defconfig.
Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
Signed-off-by: Tony Lindgren <tony@atomide.com>
While I was doing zram testing, I found sometimes decompression failed
since the compression buffer was corrupted. With investigation, I found
below commit calls cond_resched unconditionally so it could make a
problem in atomic context if the task is reschedule.
BUG: sleeping function called from invalid context at mm/vmalloc.c:108
in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 946, name: memhog
3 locks held by memhog/946:
#0: ffff9d01d4b193e8 (&mm->mmap_lock#2){++++}-{4:4}, at: __mm_populate+0x103/0x160
#1: ffffffffa3d53de0 (fs_reclaim){+.+.}-{0:0}, at: __alloc_pages_slowpath.constprop.0+0xa98/0x1160
#2: ffff9d01d56b8110 (&zspage->lock){.+.+}-{3:3}, at: zs_map_object+0x8e/0x1f0
CPU: 0 PID: 946 Comm: memhog Not tainted 5.9.3-00011-gc5bfc0287345-dirty #316
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1 04/01/2014
Call Trace:
unmap_kernel_range_noflush+0x2eb/0x350
unmap_kernel_range+0x14/0x30
zs_unmap_object+0xd5/0xe0
zram_bvec_rw.isra.0+0x38c/0x8e0
zram_rw_page+0x90/0x101
bdev_write_page+0x92/0xe0
__swap_writepage+0x94/0x4a0
pageout+0xe3/0x3a0
shrink_page_list+0xb94/0xd60
shrink_inactive_list+0x158/0x460
We can fix this by removing the ZSMALLOC_PGTABLE_MAPPING feature (which
contains the offending calling code) from zsmalloc.
Even though this option showed some amount improvement(e.g., 30%) in
some arm32 platforms, it has been headache to maintain since it have
abused APIs[1](e.g., unmap_kernel_range in atomic context).
Since we are approaching to deprecate 32bit machines and already made
the config option available for only builtin build since v5.8, lastly it
has been not default option in zsmalloc, it's time to drop the option
for better maintenance.
[1] http://lore.kernel.org/linux-mm/20201105170249.387069-1-minchan@kernel.org
Fixes: e47110e905 ("mm/vunmap: add cond_resched() in vunmap_pmd_range")
Signed-off-by: Minchan Kim <minchan@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Tony Lindgren <tony@atomide.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Harish Sriram <harish@linux.ibm.com>
Cc: Uladzislau Rezki <urezki@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://lkml.kernel.org/r/20201117202916.GA3856507@google.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Commit 785b5bb41b ("PM: AVS: Drop the avs directory and the
corresponding Kconfig") moved AVS code to SOC-specific folders, and
removed corresponding Kconfig from drivers/power, leaving original
POWER_AVS config option enabled in omap2plus_defconfig file.
Remove the option, which has no references in the tree anymore.
Fixes: 785b5bb41b ("PM: AVS: Drop the avs directory and the corresponding Kconfig")
Signed-off-by: Andrey Zhizhikin <andrey.zhizhikin@leica-geosystems.com>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Nishanth Menon <nm@ti.com>
Cc: Nishanth Menon <nm@ti.com>
Cc: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Enable the ARM SCMI protocol and the common clock, cpufreq and sensors
drivers. Broadcom STB platforms (ARCH_BRCMSTB) implement SCMI to provide
support for CPU frequency scaling, clock configuration and temperature
and current sensors.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
- Enable thermal support for omap3 now that the driver changes have
been merged
- Enable magnetometer and accelerometer support as loadable modules
for Motorola mapphone devices
- Enable eQEP counter for beaglebone blue as loadable modules
-----BEGIN PGP SIGNATURE-----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=7JiH
-----END PGP SIGNATURE-----
Merge tag 'omap-for-v5.11/defconfig-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/defconfig
Defconfig changes for omaps for v5.11 merge window
- Enable thermal support for omap3 now that the driver changes have
been merged
- Enable magnetometer and accelerometer support as loadable modules
for Motorola mapphone devices
- Enable eQEP counter for beaglebone blue as loadable modules
* tag 'omap-for-v5.11/defconfig-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: omap2plus_defconfig: Enable TI eQEP counter driver
ARM: omap2plus_defconfig: add CONFIG_AK8975=m and CONFIG_KXCJK1013=m
ARM: omap2plus_defconfig: Enable OMAP3_THERMAL
Link: https://lore.kernel.org/r/pull-1606462656-588116@atomide.com-3
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Enable support for the STMicroelectronics STUSB160X USB Type-C port
controller driver by turning on CONFIG_TYPEC and CONFIG_TYPEC_STUSB160X as
modules.
Signed-off-by: Amelie Delaunay <amelie.delaunay@st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
This enables the counter subsystem and drivers for the stm32 timer and LP
timer.
Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
Exynos EHCI driver is compiled as kernel built-in, but it requires Samsung
USB2 Generic PHY driver to operate properly, which is compiled as module.
Make the Exynos EHCI driver also a module, because having it built-in
makes no sense. Exynos OHCI, which also uses that PHY driver, is already
compiled as a module.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/20201124083312.12356-1-m.szyprowski@samsung.com
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
This enables the TI eQEP counter driver that is used by BeagleBone Blue.
Signed-off-by: David Lechner <david@lechnology.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Enable networking options required for NFS boot on TI platforms, which is
widely for automated test systems.
- enable new TI CPSW switch driver and related NET_SWITCHDEV config
- enable TI DP83867 phy
- explicitly enable PTP clock support to ensure dependent networking
drivers will stay built-in.
vmlinux size changes:
- before:
text data bss dec hex filename
14703736 8024602 444976 23173314 16198c2 ./omap-arm/vmlinux
- after:
text data bss dec hex filename
14727271 8029150 444528 23200949 16204b5 ./omap-arm/vmlinux
diff: 27635 (dec)
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Reviewed-by: Nishanth Menon <nm@ti.com>
Cc: Tony Lindgren <tony@atomide.com>
Link: https://lore.kernel.org/r/20201030124650.20349-1-grygorii.strashko@ti.com'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This updates the defconfig for the U8500 platform with
some of the changes from the v5.9 and v5.10 kernel
cycles:
- No need to select the schedutil cpufreq governor
because it is the default now.
- Enable the CY8CTMA140 touchscreen as used on the
Samsung Skomer GT-S7710.
- Enable the Samsung S6E63M0 DSI panel as used on
the Samsung Golden GT-I8810.
- Enable the KTD253 backlight as used on the Samsung
Skomer GT-S7710.
- Drop CONFIG_USB as we only use the gadget mode of
the MUSB driver.
- Add selection of the CONFIG_LEDS_LP55XX_COMMON
lest the LP5521 LEDs will not work.
- Move the config entry for CONFIG_DEBUG_FS.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Cc: Stephan Gerhold <stephan@gerhold.net>
Link: https://lore.kernel.org/r/20201105134510.1417639-1-linus.walleij@linaro.org'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- Enable support for the new R-Car V3U SoC in the arm64 defconfig,
- Refresh shmobile_defconfig for v5.10-rc1.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQ9qaHoIs/1I4cXmEiKwlD9ZEnxcAUCX66RqgAKCRCKwlD9ZEnx
cLC5AP493HI4gYGzpdkwikaOR6sMM5iwI0v3n1AYcuw79Ep11gEAyEg0DpLMAOG8
aHDYqSv6Zo10pYjbHBJRwYRrOJMarw4=
=eio1
-----END PGP SIGNATURE-----
Merge tag 'renesas-arm-defconfig-for-v5.11-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into arm/defconfig
Renesas ARM defconfig updates for v5.11
- Enable support for the new R-Car V3U SoC in the arm64 defconfig,
- Refresh shmobile_defconfig for v5.10-rc1.
* tag 'renesas-arm-defconfig-for-v5.11-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel:
arm64: defconfig: Enable R8A779A0 SoC
ARM: shmobile: defconfig: Refresh for v5.10-rc1
Link: https://lore.kernel.org/r/20201113150854.3923885-2-geert+renesas@glider.be
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The DLCI driver (dlci.c) implements the Frame Relay protocol. However,
we already have another newer and better implementation of Frame Relay
provided by the HDLC_FR driver (hdlc_fr.c).
The DLCI driver's implementation of Frame Relay is used by only one
hardware driver in the kernel - the SDLA driver (sdla.c).
The SDLA driver provides Frame Relay support for the Sangoma S50x devices.
However, the vendor provides their own driver (along with their own
multi-WAN-protocol implementations including Frame Relay), called WANPIPE.
I believe most users of the hardware would use the vendor-provided WANPIPE
driver instead.
(The WANPIPE driver was even once in the kernel, but was deleted in
commit 8db60bcf30 ("[WAN]: Remove broken and unmaintained Sangoma
drivers.") because the vendor no longer updated the in-kernel WANPIPE
driver.)
Cc: Mike McLagan <mike.mclagan@linux.org>
Signed-off-by: Xie He <xie.he.0141@gmail.com>
Link: https://lore.kernel.org/r/20201114150921.685594-1-xie.he.0141@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The Atmel MXT touchscreen can load firmware and settings from the
/lib/firmware directory, it makes sense to have it as a module to have
more control over the loading process.
Signed-off-by: Martin Jücker <martin.juecker@gmail.com>
Link: https://lore.kernel.org/r/20201113212525.13455-5-martin.juecker@gmail.com
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Lot of sunxi boards has a Realtek PHY, so let's enable it.
Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Acked-by: Jernej Skrabec <jernej.skrabec@siol.net>
Link: https://lore.kernel.org/r/20201112202652.27676-1-clabbe@baylibre.com
ARM: omap2plus_defconfig: add CONFIG_AK8975=m and CONFIG_KXCJK1013=m to
support motorola xt894's magnetometer and motorola xt875's
accelerometer respectivly
Signed-off-by: Carl Philipp Klemm <philipp@uvos.xyz>
[tony@atomide.com: shortened subject a bit]
Signed-off-by: Tony Lindgren <tony@atomide.com>
With the additional power management options enabled,
this patch enables OMAP3_THERMAL by default.
Signed-off-by: Adam Ford <aford173@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Enable ax88796c driver for the Ethernet chip on Exynos3250-based
ARTIK5 boards in exynos and multi_v7 defconfigs.
Signed-off-by: Łukasz Stelmach <l.stelmach@samsung.com>
Link: https://lore.kernel.org/r/20201103151536.26472-6-l.stelmach@samsung.com
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Drop the separate Kconfig symbol for Xircom / Entrega and always include
support in the keyspan_pda driver.
Note that all configs that enabled CONFIG_USB_SERIAL_XIRCOM also enable
CONFIG_USB_SERIAL_KEYSPAN_PDA.
Acked-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Russell said that he is no longer using this machine, and it seems that
nobody else has in a long time, so it's time to say goodbye to it.
As this is the last platform using CONFIG_ARCH_USES_GETTIMEOFFSET,
there are some follow-up patches to remove that as well.
Acked-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The media tree Kconfig has changed recently, and a lot of modules were
built unintentionally, like the dvb frontends and encoders.
Resync the defconfig to build the ISI drivers and tested sensors.
Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20201029121223.871531-1-eugen.hristev@microchip.com
The media tree Kconfig has changed recently, and a lot of modules were
built unintentionally, like the dvb frontends and encoders.
Resync the defconfig to build the sama5 drivers and tested sensors.
Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20201016075109.287506-1-eugen.hristev@microchip.com
Since commit 12d16b397c ("gpio: mxc: Support module build") the
CONFIG_GPIO_MXC option needs to be explicitly selected.
Select it to avoid boot issues on imx25/imx27 due to the lack of the
GPIO driver.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Since commit 12d16b397c ("gpio: mxc: Support module build") the
CONFIG_GPIO_MXC option needs to be explicitly selected.
Select it to avoid boot issues on imx25/imx27 due to the lack of the
GPIO driver.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Sound driver for Midas platform (Exnyos4412 SoC based) has been recently
merged, so enable it for tests like other sound drivers for Exynos based
boards.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/20201009134907.4578-1-m.szyprowski@samsung.com
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Sound driver for Midas platform (Exnyos4412 SoC based) has been recently
merged, so enable it for tests like other sound drivers for Exynos based
boards.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/20201009134855.4520-1-m.szyprowski@samsung.com
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
i.MX SoC GPIO driver provides the basic functions of GPIO pin operations
and IRQ operations, it is now changed from "def_bool y" to "tristate", so
it should be explicitly enabled to make sure all consumers work normally.
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
i.MX SoC GPIO driver provides the basic functions of GPIO pin operations
and IRQ operations, it is now changed from "def_bool y" to "tristate", so
it should be explicitly enabled to make sure all consumers work normally.
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
We keep this in a separate branch to avoid cross-branch conflicts, but
most of the material here is fairly boring -- some new drivers turned on
for hardware since they were merged, and some refreshed files due to
time having moved a lot of entries around.
-----BEGIN PGP SIGNATURE-----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=T9BC
-----END PGP SIGNATURE-----
Merge tag 'armsoc-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC defconfig updates from Olof Johansson:
"We keep this in a separate branch to avoid cross-branch conflicts, but
most of the material here is fairly boring -- some new drivers turned
on for hardware since they were merged, and some refreshed files due
to time having moved a lot of entries around"
* tag 'armsoc-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (33 commits)
ARM: multi_v7_defconfig: add FMC2 EBI controller support
arm64: defconfig: enable Qualcomm ASoC modules
arm64: defconfig: qcom: enable GPU clock controller for SM8[12]50
arm64: defconfig: enable INTERCONNECT for Qualcomm chipsets
arm64: defconfig: enable the sl28cpld board management controller
arm64: defconfig: Enable the eLCDIF and Raydium RM67191 drivers
arm64: defconfig: Enable Qcom SNPS Femto PHY
ARM: configs: Update Realview defconfig
ARM: configs: Update Versatile defconfig
ARM: config: aspeed_g5: Enable IBM OP Panel driver
ARM: config: aspeed-g5: Enable I2C GPIO mux driver
ARM: config: aspeed: Fix selection of media drivers
arm64: defconfig: Enable Samsung S3FWRN5 NFC driver
ARM: omap2plus_defconfig: enable generic net options
ARM: omap2plus_defconfig: enable twl4030_madc as a loadable module
arm64: defconfig: Enable clock driver for ROHM BD718x7 PMIC
arm64: defconfig: Build ADMA and ACONNECT driver
arm64: defconfig: Build AHUB component drivers
arm64: defconfig: Enable Lontium LT9611 driver
arm64: defcondfig: Enable USB ACM and FTDI drivers
...
SoC changes, a substantial part of this is cleanup of some of the older
platforms that used to have a bunch of board files. In particular:
- Removal of non-DT i.MX platforms that haven't seen activity in years,
it's time to remove them.
- A bunch of cleanup and removal of platform data for TI/OMAP platforms,
moving over to genpd for power/reset control (yay!)
- Major cleanup of Samsung S3C24xx and S3C64xx platforms, moving them
closer to multiplatform support (not quite there yet, but getting
close).
THere are a few other changes too, smaller fixlets, etc. For new
platform support, the primary ones re:
- New SoC: Hisilicon SD5203, ARM926EJ-S platform.
- Cpufreq support for i.MX7ULP
-----BEGIN PGP SIGNATURE-----
iQJDBAABCgAtFiEElf+HevZ4QCAJmMQ+jBrnPN6EHHcFAl+TT4gPHG9sb2ZAbGl4
b20ubmV0AAoJEIwa5zzehBx322MP/1mI56SyOFx30AqtWBPSjHJp+DzhOObyb4vD
ndYuicBIn9tJwvVRBBZkfsbIU8EENVwrN3hOpesaj9L7xiqOqKakcnyC1REYmpIs
8XBDfdZzy5PrMHIu3fF1ZDCQyO7KndGf5DfLVxJtcf1tSPQyQCuIA3FtS6d8Bxnz
r491+om67ucnlFD5X0Spm3RdZH+ECmXx2iXwoS0Zi7P+X+S+ovG8wBV/X0ggeoBc
Zgi4W01SiRupmSVZ6PA7FvWaLGQErQAALQOcFtMcFgjeWzc1v2QzcURELH8JW7ro
72AH9st1Kvi3hoN2HNNzUnNUdQvZ+AdH8skMIpN/e1cBYqYStAF3gm/R9h+iVHbG
GMmgzXHAFErfAW2UcF8tq1CzvQ5ChcTLNXdeoa8CeQbcDfocF3EyuKSPuDH+ve0H
kk4tPesTAc6XCEVwLaGnoC75sdum5mSi8h9vqhln2KCdeTY7jxzH9YGHjm71Supb
kV9vqo5Q5U/c5l2nU4r5q/DZdIahKsk3HIQZ0iG7BifAzamaTh4uyLVjtM6HSwNz
tdHZaxoHd/PLI5IoeggFelx6qgvK5qVRLP0evgOdTLRFLj/ZbrOf0Q7DjdTy2BjZ
Lgq461QqNapOzxq43G2IDT2+P62Q1+d+YLCKBgaGQaJicyU5m9STCNo3UBb1qH1h
W6UwGF5z
=0+Ee
-----END PGP SIGNATURE-----
Merge tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC platform updates from Olof Johansson:
"SoC changes, a substantial part of this is cleanup of some of the
older platforms that used to have a bunch of board files.
In particular:
- Remove non-DT i.MX platforms that haven't seen activity in years,
it's time to remove them.
- A bunch of cleanup and removal of platform data for TI/OMAP
platforms, moving over to genpd for power/reset control (yay!)
- Major cleanup of Samsung S3C24xx and S3C64xx platforms, moving them
closer to multiplatform support (not quite there yet, but getting
close).
There are a few other changes too, smaller fixlets, etc. For new
platform support, the primary ones are:
- New SoC: Hisilicon SD5203, ARM926EJ-S platform.
- Cpufreq support for i.MX7ULP"
* tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (121 commits)
ARM: mstar: Select MStar intc
ARM: stm32: Replace HTTP links with HTTPS ones
ARM: debug: add UART early console support for SD5203
ARM: hisi: add support for SD5203 SoC
ARM: omap3: enable off mode automatically
clk: imx: imx35: Remove mx35_clocks_init()
clk: imx: imx31: Remove mx31_clocks_init()
clk: imx: imx27: Remove mx27_clocks_init()
ARM: imx: Remove unused definitions
ARM: imx35: Retrieve the IIM base address from devicetree
ARM: imx3: Retrieve the AVIC base address from devicetree
ARM: imx3: Retrieve the CCM base address from devicetree
ARM: imx31: Retrieve the IIM base address from devicetree
ARM: imx27: Retrieve the CCM base address from devicetree
ARM: imx27: Retrieve the SYSCTRL base address from devicetree
ARM: s3c64xx: bring back notes from removed debug-macro.S
ARM: s3c24xx: fix Wunused-variable warning on !MMU
ARM: samsung: fix PM debug build with DEBUG_LL but !MMU
MAINTAINERS: mark linux-samsung-soc list non-moderated
ARM: imx: Remove remnant board file support pieces
...
- Enable i.MX6SLL, i.MX7ULP SoC and CAAM crypto driver support in
multi_v7_defconfig.
- Enable the eLCDIF and Raydium RM67191 driver in arm64 defconfig to
support MIPI DSI on imx8mq-evk.
- Enable NWL DSI host controller, dphy and SITRONIX ST7703 panel driver
in arm64 defconfig to support display on imx8mq-librem5-devkit.
- Enable sl28cpld board management controller driver support in arm64
defconfig.
- Enable i.MX8M SoCs support in imx_v6_v7_defconfig as they can run in
AArch32 mode.
-----BEGIN PGP SIGNATURE-----
iQFIBAABCgAyFiEEFmJXigPl4LoGSz08UFdYWoewfM4FAl9q9hYUHHNoYXduZ3Vv
QGtlcm5lbC5vcmcACgkQUFdYWoewfM5O3Af/cYifoTK2/oL+IC9tirmHj+1h4Yqa
F+owysiOlMoqdxhHRYlhiowE5euTEMAQFjKyUxSLoBUnemP0W/t556zcyCvCJgFL
R1ZUm8clACxXYJVlasT7qRhR/T0hVz2BMgIAjWtoY8hTXfxyVr+WurdxLbdUn8cC
6p28DV26xdZeRH/Jrk/4frSWxjCYPNcVmstP8eHcPOOBw7SdrfquOrjMsaZsiAfF
4CzdjhfCBDH0XznTQ5KY9J+Z8Da8fcikM1+VvVb64WlZI9WPHYYmQQclpJomnOHG
L5dJiLFTjQcWXt/TkYaZozyiW8pG8g7gawpom5JJ1SbW3GR7OFP+RTv8RQ==
=qHiE
-----END PGP SIGNATURE-----
Merge tag 'imx-defconfig-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/defconfig
i.MX defconfig update for 5.10:
- Enable i.MX6SLL, i.MX7ULP SoC and CAAM crypto driver support in
multi_v7_defconfig.
- Enable the eLCDIF and Raydium RM67191 driver in arm64 defconfig to
support MIPI DSI on imx8mq-evk.
- Enable NWL DSI host controller, dphy and SITRONIX ST7703 panel driver
in arm64 defconfig to support display on imx8mq-librem5-devkit.
- Enable sl28cpld board management controller driver support in arm64
defconfig.
- Enable i.MX8M SoCs support in imx_v6_v7_defconfig as they can run in
AArch32 mode.
* tag 'imx-defconfig-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
arm64: defconfig: enable the sl28cpld board management controller
arm64: defconfig: Enable the eLCDIF and Raydium RM67191 drivers
arm64: defconfig: Enable imx8mq-librem5-devkit display stack
arm64: defconfig: re-sync DRM related defconfig bits
ARM: imx_v6_v7_defconfig: Support i.MX8MN/P/Q
ARM: multi_v7_defconfig: Enable i.MX7ULP SoC
ARM: multi_v7_defconfig: Enable i.MX6SLL SoC
ARM: multi_v7_defconfig: enable caam crypto module
Link: https://lore.kernel.org/r/20200923073009.23678-6-shawnguo@kernel.org
Signed-off-by: Olof Johansson <olof@lixom.net>
Enable twl4030_madc as a loadable module as the ADC is used
on some devices by the battery charger. And enable more widely
used networking options as loadable modules where possible.
-----BEGIN PGP SIGNATURE-----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=5No6
-----END PGP SIGNATURE-----
Merge tag 'omap-for-v5.10/defconfig-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/defconfig
Defconfig changes for omaps for v5.10 merge window
Enable twl4030_madc as a loadable module as the ADC is used
on some devices by the battery charger. And enable more widely
used networking options as loadable modules where possible.
* tag 'omap-for-v5.10/defconfig-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: omap2plus_defconfig: enable generic net options
ARM: omap2plus_defconfig: enable twl4030_madc as a loadable module
Link: https://lore.kernel.org/r/pull-1601445968-476435@atomide.com-3
Signed-off-by: Olof Johansson <olof@lixom.net>
This patch adds FMC2 EBI controller support used by STM32MP SOCs.
Link: https://lore.kernel.org/r/20200924101342.4707-1-alexandre.torgue@st.com
Signed-off-by: Christophe Kerello <christophe.kerello@st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
1. Re-enable platform media drivers as new dependency on
MEDIA_PLATFORM_SUPPORT appeared.
2. Enable ROHM BD718x7 PMIC present on some of boards with i.MX 8 SoCs.
3. Enable Samsung S3FWRN5 NFC driver present on TM2/TM2E boards.
-----BEGIN PGP SIGNATURE-----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=oMmC
-----END PGP SIGNATURE-----
Merge tag 'samsung-defconfig-5.10' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into arm/defconfig
Samsung defconfig changes for v5.10
1. Re-enable platform media drivers as new dependency on
MEDIA_PLATFORM_SUPPORT appeared.
2. Enable ROHM BD718x7 PMIC present on some of boards with i.MX 8 SoCs.
3. Enable Samsung S3FWRN5 NFC driver present on TM2/TM2E boards.
* tag 'samsung-defconfig-5.10' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
arm64: defconfig: Enable Samsung S3FWRN5 NFC driver
arm64: defconfig: Enable clock driver for ROHM BD718x7 PMIC
ARM: exynos_defconfig: enable platform media drivers
Link: https://lore.kernel.org/r/20200920160705.9651-2-krzk@kernel.org
Signed-off-by: Olof Johansson <olof@lixom.net>
- Fix an issue with unwanted media drivers being enabled
- New driver: IBM OP Panel, used on ast2600 systems. This requires
enabling I2C slave mode
- Enable I2C MUX GPIO driver
-----BEGIN PGP SIGNATURE-----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=GvTE
-----END PGP SIGNATURE-----
Merge tag 'aspeed-5.10-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/aspeed into arm/defconfig
ASPEED defconfig updates for 5.10
- Fix an issue with unwanted media drivers being enabled
- New driver: IBM OP Panel, used on ast2600 systems. This requires
enabling I2C slave mode
- Enable I2C MUX GPIO driver
* tag 'aspeed-5.10-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/aspeed:
ARM: config: aspeed_g5: Enable IBM OP Panel driver
ARM: config: aspeed-g5: Enable I2C GPIO mux driver
ARM: config: aspeed: Fix selection of media drivers
Link: https://lore.kernel.org/r/CACPK8XdFE2K1_cyrg=uaD6CaOm_p0RCRmjAsu6uyFKD4rnDggQ@mail.gmail.com
Signed-off-by: Olof Johansson <olof@lixom.net>
- Enable touchscreen support on the iWave RZ/G1E platform,
- Update for PCIE_RCAR => CONFIG_PCIE_RCAR_{HOST,EP} split, including
enabling the latter,
- Enable FLASH support on various R-Car Gen3 boards,
- Refresh shmobile_defconfig for v5.9-rc1.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQ9qaHoIs/1I4cXmEiKwlD9ZEnxcAUCX1ICbQAKCRCKwlD9ZEnx
cAL7AP9b6m9TZdbWJEiypip4edwJi085EUS1SykJyw2/esW/6gEAhA7Z5/LoTe0j
sMlIXvfSHLzhEZ3TYH5GFIohlZK9wgw=
=/JQk
-----END PGP SIGNATURE-----
Merge tag 'renesas-arm-defconfig-for-v5.10-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into arm/defconfig
Renesas ARM defconfig updates for v5.10
- Enable touchscreen support on the iWave RZ/G1E platform,
- Update for PCIE_RCAR => CONFIG_PCIE_RCAR_{HOST,EP} split, including
enabling the latter,
- Enable FLASH support on various R-Car Gen3 boards,
- Refresh shmobile_defconfig for v5.9-rc1.
* tag 'renesas-arm-defconfig-for-v5.10-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel:
ARM: shmobile: defconfig: Enable CONFIG_PCIE_RCAR_HOST
ARM: multi_v7_defconfig: Enable CONFIG_PCIE_RCAR_HOST
arm64: defconfig: Enable RPC-IF support
ARM: shmobile: defconfig: Refresh for v5.9-rc1
arm64: defconfig: Enable R-Car PCIe endpoint driver
ARM: shmobile: defconfig: Enable TOUCHSCREEN_STMPE
Link: https://lore.kernel.org/r/20200904114819.30254-2-geert+renesas@glider.be
Signed-off-by: Olof Johansson <olof@lixom.net>
Update the Integrator defconfig to the changes from the recent
kernel cycles and especially the v5.9-rc1 changes.
- Move options around as a result of Kconfig changes.
- Drop the ZBOOT_ROM* stuff that doesn't exist anymore.
- Add the syscon LEDs as used on the board for heartbeat
and MMC traffic indication.
- Add fixed voltage regulator support, this is used by the
MMC controller for card voltage.
- Select CONFIG_DRM_DISPLAY_CONNECTOR=y, the
CONFIG_DRM_SIMPLE_BRIDGE was renamed when renaming the
driver, but the simple bridge requires another bridge,
the display connector bridge, in order to work, so this
is required to have graphics working properly in kernel
v5.9-rc1+
Link: https://lore.kernel.org/r/20200901082558.80388-1-linus.walleij@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Olof Johansson <olof@lixom.net>
Update the Integrator defconfig to the changes from the recent
kernel cycles and especially the v5.9-rc1 changes.
- Move options around as a result of Kconfig changes.
- Drop the ZBOOT_ROM* stuff that doesn't exist anymore.
- Select CONFIG_DRM_DISPLAY_CONNECTOR=y, the
CONFIG_DRM_SIMPLE_BRIDGE was renamed when renaming the
driver, but the simple bridge requires another bridge,
the display connector bridge, in order to work, so this
is required to have graphics working properly in kernel
v5.9-rc1+
Link: https://lore.kernel.org/r/20200901073930.31548-1-linus.walleij@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Olof Johansson <olof@lixom.net>
In the 5.7 merge window the media kconfig was restructued. For most
platforms these changes set CONFIG_MEDIA_SUPPORT_FILTER=y which keeps
unwanted drivers disabled.
The exception is if a config sets EMBEDDED or EXPERT (see b0cd4fb276).
In that case the filter is set to =n, causing a bunch of DVB tuner drivers
(MEDIA_TUNER_*) to be accidentally enabled. This was noticed as it blew
out the build time for the Aspeed defconfigs.
Enabling the filter means the Aspeed config also needs to set
CONFIG_MEDIA_PLATFORM_SUPPORT=y in order to have the CONFIG_VIDEO_ASPEED
driver enabled.
Fixes: 06b93644f4 ("media: Kconfig: add an option to filter in/out platform drivers")
Fixes: b0cd4fb276 ("media: Kconfig: on !EMBEDDED && !EXPERT, enable driver filtering")
Signed-off-by: Joel Stanley <joel@jms.id.au>
Cc: stable@vger.kernel.org
CC: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Enable set of generic, widely used, networking options:
- basic QoS, filter and actions
- VLAN support
- Bridge support
Use "M" build option where possible.
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
The ADC is used by twl4030_charger to read voltages. If a dtb contains
the ADC but the module is not build, probing twl4030_charger will be
endlessly deferred, so just enable CONFIG_TWL4030_MADC in the config.
Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
Signed-off-by: Tony Lindgren <tony@atomide.com>
i.MX35 has basic device tree support.
To achieve the goal of converting all i.MX SoCs to a
devicetree-only platform, remove imx35 board files.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
i.MX31 has basic device tree support.
To achieve the goal of converting all i.MX SoCs to a
devicetree-only platform, remove imx31 board files.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
i.MX27 has basic device tree support.
To achieve the goal of converting all i.MX SoCs to a
devicetree-only platform, remove imx27 board files.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
config option PCIE_RCAR internally selects PCIE_RCAR_HOST which builds the
same driver. So this patch renames CONFIG_PCIE_RCAR to
CONFIG_PCIE_RCAR_HOST so that PCIE_RCAR can be safely dropped from Kconfig
file.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Link: https://lore.kernel.org/r/20200826093220.10266-3-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
config option PCIE_RCAR internally selects PCIE_RCAR_HOST which builds the
same driver. So this patch renames CONFIG_PCIE_RCAR to
CONFIG_PCIE_RCAR_HOST so that PCIE_RCAR can be safely dropped from Kconfig
file.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Link: https://lore.kernel.org/r/20200826093220.10266-2-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Update the Integrator defconfig to the changes from the recent
kernel cycles and especially the v5.9-rc1 changes.
- Move options around as a result of Kconfig changes.
- Drop the ZBOOT_ROM* stuff that doesn't exist anymore.
- Select GPIO input and evdev as used by the pushbuttons
on the machine.
- Select CONFIG_DRM_DISPLAY_CONNECTOR=y, the
CONFIG_DRM_SIMPLE_BRIDGE was renamed when renaming the
driver, but the simple bridge requires another bridge,
the display connector bridge, in order to work, so this
is required to have graphics working properly in kernel
v5.9-rc1+
Link: https://lore.kernel.org/r/20200820085752.42994-1-linus.walleij@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Olof Johansson <olof@lixom.net>
i.MX8MN/P/Q is built with AArch64 hardware, this is to support
it could run in AArch32 mode with clock and pinctrl driver enabled.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
caam crypto module is included in several ARMv7-based SoCs from
i.MX, Layerscape, Vybrid families.
Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Commit 06b93644f4 ("media: Kconfig: add an option to filter in/out
platform drivers") introduced a dependency of all platform media drivers
on the new CONFIG_MEDIA_PLATFORM_SUPPORT symbol, so add it also to
exynos_defconfig. While touching this part, update the media related
configs to the current layout.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Since commit 61a47c1ad3 ("sysctl: Remove the sysctl system call"),
sys_sysctl is actually unavailable: any input can only return an error.
We have been warning about people using the sysctl system call for years
and believe there are no more users. Even if there are users of this
interface if they have not complained or fixed their code by now they
probably are not going to, so there is no point in warning them any
longer.
So completely remove sys_sysctl on all architectures.
[nixiaoming@huawei.com: s390: fix build error for sys_call_table_emu]
Link: http://lkml.kernel.org/r/20200618141426.16884-1-nixiaoming@huawei.com
Signed-off-by: Xiaoming Ni <nixiaoming@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Will Deacon <will@kernel.org> [arm/arm64]
Acked-by: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Aleksa Sarai <cyphar@cyphar.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Bin Meng <bin.meng@windriver.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: chenzefeng <chenzefeng2@huawei.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Christian Brauner <christian@brauner.io>
Cc: Chris Zankel <chris@zankel.net>
Cc: David Howells <dhowells@redhat.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Diego Elio Pettenò <flameeyes@flameeyes.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Dominik Brodowski <linux@dominikbrodowski.net>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Helge Deller <deller@gmx.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Iurii Zaikin <yzaikin@google.com>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kars de Jong <jongk@linux-m68k.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: Krzysztof Kozlowski <krzk@kernel.org>
Cc: Luis Chamberlain <mcgrof@kernel.org>
Cc: Marco Elver <elver@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Martin K. Petersen <martin.petersen@oracle.com>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Miklos Szeredi <mszeredi@redhat.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Cc: Nick Piggin <npiggin@gmail.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Olof Johansson <olof@lixom.net>
Cc: Paul Burton <paulburton@kernel.org>
Cc: "Paul E. McKenney" <paulmck@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Rich Felker <dalias@libc.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Sami Tolvanen <samitolvanen@google.com>
Cc: Sargun Dhillon <sargun@sargun.me>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Sudeep Holla <sudeep.holla@arm.com>
Cc: Sven Schnelle <svens@stackframe.org>
Cc: Thiago Jung Bauermann <bauerman@linux.ibm.com>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: Zhou Yanjie <zhouyanjie@wanyeetech.com>
Link: http://lkml.kernel.org/r/20200616030734.87257-1-nixiaoming@huawei.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-----BEGIN PGP SIGNATURE-----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=SYqr
-----END PGP SIGNATURE-----
Merge tag 'media/v5.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media updates from Mauro Carvalho Chehab:
- Legacy soc_camera driver was removed from staging
- New I2C sensor related drivers: dw9768, ch7322, max9271, rdacm20
- TI vpe driver code was re-organized and had new features added
- Added Xilinx MIPI CSI-2 Rx Subsystem driver
- Added support for Infrared Toy and IR Droid devices
- Lots of random driver fixes, new features and cleanups
* tag 'media/v5.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (318 commits)
media: camss: fix memory leaks on error handling paths in probe
media: davinci: vpif_capture: fix potential double free
media: radio: remove redundant assignment to variable retval
media: allegro: fix potential null dereference on header
media: mtk-mdp: Fix a refcounting bug on error in init
media: allegro: fix an error pointer vs NULL check
media: meye: fix missing pm_mchip_mode field
media: cafe-driver: use generic power management
media: saa7164: use generic power management
media: v4l2-dev/ioctl: Fix document for VIDIOC_QUERYCAP
media: v4l2: Correct kernel-doc inconsistency
media: v4l2: Correct kernel-doc inconsistency
media: dvbdev.h: keep * together with the type
media: v4l2-subdev.h: keep * together with the type
media: videobuf2: Print videobuf2 buffer state by name
media: colorspaces-details.rst: fix V4L2_COLORSPACE_JPEG description
media: tw68: use generic power management
media: meye: use generic power management
media: cx88: use generic power management
media: cx25821: use generic power management
...
CAN_M_CAN_PLATFORM is needed to probe the driver on sama5 platforms
after the driver was split into multiple files.
Signed-off-by: Cristian Birsan <cristian.birsan@microchip.com>
Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@microchip.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20200723162434.1983643-3-codrin.ciubotariu@microchip.com
These modules are needed to configure bridges in Linux, to take full
advantage of the KSZ switch capabilities.
Signed-off-by: Razvan Stefanescu <razvan.stefanescu@microchip.com>
Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@microchip.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20200723162434.1983643-2-codrin.ciubotariu@microchip.com
Enable DSA and KSZ9477 support as modules. Ethernet switches are used by
the SAMA5D2-ICP board.
Signed-off-by: Razvan Stefanescu <razvan.stefanescu@microchip.com>
Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@microchip.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20200723162434.1983643-1-codrin.ciubotariu@microchip.com
- Enable PCA9450 regulator driver in arm64 defconfig.
- Enable RV8803 RTC and FSL_SAI audio support in arm64 defconfig to make
it useful for Kontron sl28 boards.
- Enable i.MX8MM clock and pinctrl driver in imx_v6_v7_defconfig to get
AARCH32 mode kernel work on AARCH64 hardware.
-----BEGIN PGP SIGNATURE-----
iQFIBAABCgAyFiEEFmJXigPl4LoGSz08UFdYWoewfM4FAl8VWPcUHHNoYXduZ3Vv
QGtlcm5lbC5vcmcACgkQUFdYWoewfM77HQgAshj+pVP6bsje1ToHm1qdeYTiNYEw
rvmEZ+5+S6Qmj8wj7z0pSwAGsUe7ZqkfcOJqRUBOHQHxNKSpTvccg75QX3SQBFPE
1vojpN+XP2cDRyWFe4cbNjoAJV9hudix+AZAJNbhth92Z7YEz/KHu2oIuni6Xqqn
V+qFqqsuTCRUp+4C1rJphGaCnS5ux4E1gDz3Ae1e6LKprk4sPtpo4ViuNLRZDigK
O1RSiQJYcNTWEKdmrKQiMLPcO4elHnsf+kvi5hHXRc3a5h44yQ3qdMmysw/X6n/9
ElbmI9PCeKOaLqmkzsQYBl2M6v24KXjijmjQgA+tf2kZJB+zlSR8RwkqeQ==
=J5lQ
-----END PGP SIGNATURE-----
Merge tag 'imx-defconfig-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/defconfig
i.MX defconfig update for 5.9:
- Enable PCA9450 regulator driver in arm64 defconfig.
- Enable RV8803 RTC and FSL_SAI audio support in arm64 defconfig to make
it useful for Kontron sl28 boards.
- Enable i.MX8MM clock and pinctrl driver in imx_v6_v7_defconfig to get
AARCH32 mode kernel work on AARCH64 hardware.
* tag 'imx-defconfig-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
ARM: imx_v6_v7_defconfig: Support i.MX8MM
arm64: defconfig: enable RTC and audio support on Kontron sl28 boards
arm64: defconfig: add pca9450 pmic driver
Link: https://lore.kernel.org/r/20200720085536.24138-5-shawnguo@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
add all the new drivers merged recently.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQRcEzekXsqa64kGDp7j7w1vZxhRxQUCXxWlogAKCRDj7w1vZxhR
xZRpAP9zz41nKML2Dtb08tYExiCpYTPpKxZLditIVb++2m+MmAEAzC4DAKZ+8TeR
q64W64aLxbulbLsWw24pPRyMUKPZswM=
=JhPS
-----END PGP SIGNATURE-----
Merge tag 'sunxi-config-for-5.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into arm/defconfig
A bunch of patches to generally make sunxi_defconfig more helpful and
add all the new drivers merged recently.
* tag 'sunxi-config-for-5.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
ARM: configs: sunxi: Enable crypto related options
ARM: sunxi: configs: Enable the Mailbox driver
ARM: configs: sunxi: Enable the PS/2 controller
ARM: configs: sunxi: Enable Lima
ARM: configs: sunxi: Add DRM output-related options
ARM: configs: sunxi: Enable ASoC options
ARM: configs: sunxi: Enable Cedrus
ARM: configs: sunxi: Enable the deinterlace and rotation engines
ARM: configs: sunxi: Enable the CSI drivers
ARM: configs: sunxi: Run savedefconfig
Link: https://lore.kernel.org/r/c74e64c9-f1f2-40ee-b4cd-c1430d32cf8d.lettre@localhost
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Enables a few new configuration options that are useful on the new Nexus
7 and Acer A500 devices, as well as the userspace CPU frequency governor
that's mainly used for testing.
-----BEGIN PGP SIGNATURE-----
iQJHBAABCAAxFiEEiOrDCAFJzPfAjcif3SOs138+s6EFAl8RzOsTHHRyZWRpbmdA
bnZpZGlhLmNvbQAKCRDdI6zXfz6zoZz+EACSWbN0LCgn5qhF3nlG0VmLjhnpKQse
78UQnXZj+ekw5L+WJBObGAp/1Tn/MYWtknoA6abXUkFlinIkFvOasnc7hVMdHEBP
p4+UQxy73pHHcz4FmERiAD0KFasqriclHvABB5+hUjz6Qid6/ZsjAMz1S2LxZZqC
4eNTRBgVf1/eA5R9GLIXceszvsofGOKt0ApZNB2R7kNA3r3ww4PXzEinaTlfqajI
qYWUQCC4WMdtKS0lhND/Z7eqpk9uCGJVxn8d2Tv0BaHDAq+zc+AO9ovoVPwgJ/Pp
/SXwvtBsNz/XM+Klyj3WEH0sUDBc5OR5uu7hg+4YMZImyA3NpiNJHSI7yHNOBRR9
oiMfVYRW94BPOlgVjQ8K/QXEGTctkCTSOyRNmrK56ou4dKmvM9k5HWNsQzmN6Hly
DYVWeHsEKURFRAR/VIAxpFQIlSJcZe0kl8TSgcG8Lv6sqRiY6/hMFcT5jVXL72QL
KiMXGEKk0Kc3s6JxTJgf//V/rZ/0GIN1y4aeBWBzNIgvNE9TloVhvGwi2tLZ74Nb
fmeNbbwDVjVxf7NfhKzZJEAUSFU8/giD3F4dfgFPHQafuQajhTddN0pmJ8Qn01XB
ZJ/fcLGlf+4YJsNhxvb7ZqxM3LzsbaRwWpfEytVd5vVNh8AZnLM0yxfLZt1V62ry
OL0p8ork6MAn0g==
=x+zU
-----END PGP SIGNATURE-----
Merge tag 'tegra-for-5.9-arm-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/defconfig
ARM: tegra: Default configuration changes for v5.9-rc1
Enables a few new configuration options that are useful on the new Nexus
7 and Acer A500 devices, as well as the userspace CPU frequency governor
that's mainly used for testing.
* tag 'tegra-for-5.9-arm-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
ARM: tegra_defconfig: Enable options useful for Nexus 7 and Acer A500
ARM: tegra: Enable CPUFREQ userspace governor
Link: https://lore.kernel.org/r/20200717161300.1661002-6-thierry.reding@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
We refactored the CrOS EC drivers moving part of the code from the MFD
subsystem to the platform chrome subsystem. During this change we needed
to rename some config options, so, update the defconfigs accordingly.
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Gwendal Grignou <gwendal@chromium.org>
Tested-by: Gwendal Grignou <gwendal@chromium.org>
Acked-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Enable several very useful options and drivers for hardware that is found
on Nexus 7 and Acer A500 tablet devices. Please note that some drivers may
require firmware files extracted from original Android image.
Link: https://github.com/grate-driver/linux-firmware
Link: https://github.com/grate-driver/alsa-ucm-conf
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Enable the CPUFREQ userspace governor in the tegra_defconfig so that
we can test CPUFREQ with the userspace governor with this configuration
on 32-bit Tegra devices.
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
i.MX8MM is built with AArch64 hardware, this is to support
it could run in Aarch32 mode with clock and pinctrl driver enabled.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The mailbox found on the A31 and later SoCs have recently gained some
support in Linux. Since it's going to be useful for crust, let's enable it
in our defconfig.
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Acked-by: Chen-Yu Tsai <wens@csie.org>
Link: https://lore.kernel.org/r/20200706132323.147562-2-maxime@cerno.tech
We're missing a bunch of options related to the DRM driver options (panels,
HDMI, CEC) that seems useful. Let's add them in the defconfig.
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20200705091904.42795-5-maxime@cerno.tech
Acked-by: Chen-Yu Tsai <wens@csie.org>
We've had drivers for the deinterlace and rotation engines for a while now,
let's enable them in the defconfig.
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20200705091904.42795-3-maxime@cerno.tech
Acked-by: Chen-Yu Tsai <wens@csie.org>
We've had CSI drivers for the older and newer SoCs for a while now, let's
enable them in the defconfig.
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20200705091904.42795-2-maxime@cerno.tech
Acked-by: Chen-Yu Tsai <wens@csie.org>
We haven't run savedefconfig for a while and some options have moved
around. In order to ease the patch application / conflict resolution, let's
run it.
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Acked-by: Chen-Yu Tsai <wens@csie.org>
Link: https://lore.kernel.org/r/20200705091904.42795-1-maxime@cerno.tech
Drop all configs with the CONFIG_SOC_CAMERA prefix since those
have been removed.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Increase build and test coverage by enabling support for more hardware
present on Renesas SoCs and boards:
- Dialog DA9063 PMIC "ONKEY", as used on the Stout and Silk boards,
- Renesas RZ/A watchdog timer, as used on RZ/A1H and RZ/A2M boards,
- Renesas RZ/A1H Capture Engine Unit, as used on the GR-Peach
audiocamera shield expansion board,
- Analog Devices ADV7612 HDMI receiver (incl. CEC), as used on the
Koelsch and Lager boards,
- Renesas RZ/A1H Realtime Clock, as used on the Genmai and RSK+RZA1
boards.
All of the above are modular (CEC support is an optional feature of the
modular ADV7604 driver).
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Link: https://lore.kernel.org/r/20200630171237.11077-1-geert+renesas@glider.be
Refresh the defconfig for Renesas ARM boards:
- Drop CONFIG_ZBOOT_ROM_TEXT=0x0 CONFIG_ZBOOT_ROM_BSS=0x0 (no longer
needed since commit 39c3e30456 ("ARM: 8984/1: Kconfig: set
default ZBOOT_ROM_TEXT/BSS value to 0x0")),
- Move CONFIG_MEDIA_SUBDRV_AUTOSELECT (moved in commit
1b80d36aeb ("media: Kconfig: move the position of sub-driver
autoselection")),
- Drop CONFIG_MEDIA_CONTROLLER=y and CONFIG_VIDEO_V4L2_SUBDEV_API=y
(auto-enabled since commit 32a363d0b0 ("media: Kconfig files:
use select for V4L2 subdevs and MC")),
- Enable CONFIG_MEDIA_PLATFORM_SUPPORT (needed since commit
06b93644f4 ("media: Kconfig: add an option to filter in/out
platform drivers")).
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20200624131931.3686-2-geert+renesas@glider.be
One new platform gets added, the Realtek RTD1195, which is an older
Cortex-a7 based relative of the RTD12xx chips that are already supported
in arch/arm64. The platform may also be extended to support running
32-bit kernels on those 64-bit chips for memory-constrained machines.
In the Renesas shmobile platform, we gain support for "RZ/G1H" or R8A7742,
an eight-core chip based on Cortex-A15 and Cortex-A7 cores, originally
released in 2016 as one of the last high-end 32-bit designs.
There is ongoing cleanup for the integrator, tegra, imx, and omap2
platforms, with integrator getting very close to the goal of having
zero code in arch/arm/, and omap2 moving more of the chip specifics
from old board code into device tree files.
The Versatile Express platform is made more modular, with built-in
drivers now becoming loadable modules. This is part of a greater effort
for the Android OS to have a common kernel binary for all platforms and
any platform specific code in loadable modules.
The PXA platform drops support for Compulab's pxa2xx boards that had
rather unusual flash and PCI drivers but no known users remaining.
All device drivers specific to those boards can now get removed as
well.
Across platforms, there is ongoing cleanup, with Geert and Rob
revisiting some a lot of Kconfig options.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-----BEGIN PGP SIGNATURE-----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=gzCp
-----END PGP SIGNATURE-----
Merge tag 'arm-soc-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC updates from Arnd Bergmann:
"One new platform gets added, the Realtek RTD1195, which is an older
Cortex-a7 based relative of the RTD12xx chips that are already
supported in arch/arm64. The platform may also be extended to support
running 32-bit kernels on those 64-bit chips for memory-constrained
machines.
In the Renesas shmobile platform, we gain support for "RZ/G1H" or
R8A7742, an eight-core chip based on Cortex-A15 and Cortex-A7 cores,
originally released in 2016 as one of the last high-end 32-bit
designs.
There is ongoing cleanup for the integrator, tegra, imx, and omap2
platforms, with integrator getting very close to the goal of having
zero code in arch/arm/, and omap2 moving more of the chip specifics
from old board code into device tree files.
The Versatile Express platform is made more modular, with built-in
drivers now becoming loadable modules. This is part of a greater
effort for the Android OS to have a common kernel binary for all
platforms and any platform specific code in loadable modules.
The PXA platform drops support for Compulab's pxa2xx boards that had
rather unusual flash and PCI drivers but no known users remaining. All
device drivers specific to those boards can now get removed as well.
Across platforms, there is ongoing cleanup, with Geert and Rob
revisiting some a lot of Kconfig options"
* tag 'arm-soc-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (94 commits)
ARM: omap2: fix omap5_realtime_timer_init definition
ARM: zynq: Don't select CONFIG_ICST
ARM: OMAP2+: Fix regression for using local timer on non-SMP SoCs
clk: versatile: Fix kconfig dependency on COMMON_CLK_VERSATILE
ARM: davinci: fix build failure without I2C
power: reset: vexpress: fix build issue
power: vexpress: cleanup: use builtin_platform_driver
power: vexpress: add suppress_bind_attrs to true
Revert "ARM: vexpress: Don't select VEXPRESS_CONFIG"
MAINTAINERS: pxa: remove Compulab arm/pxa support
ARM: pxa: remove Compulab pxa2xx boards
bus: arm-integrator-lm: Fix return value check in integrator_ap_lm_probe()
soc: imx: move cpu code to drivers/soc/imx
ARM: imx: move cpu definitions into a header
ARM: imx: use device_initcall for imx_soc_device_init
ARM: imx: pcm037: make pcm970_sja1000_platform_data static
bus: ti-sysc: Timers no longer need legacy quirk handling
ARM: OMAP2+: Drop old timer code for dmtimer and 32k counter
ARM: dts: Configure system timers for omap2
ARM: dts: Configure system timers for ti81xx
...
-----BEGIN PGP SIGNATURE-----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=KNAo
-----END PGP SIGNATURE-----
Merge tag 'media/v5.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media updates from Mauro Carvalho Chehab:
- Media documentation is now split into admin-guide, driver-api and
userspace-api books (a longstanding request from Jon);
- The media Kconfig was reorganized, in order to make easier to select
drivers and their dependencies;
- The testing drivers now has a separate directory;
- added a new driver for Rockchip Video Decoder IP;
- The atomisp staging driver was resurrected. It is meant to work with
4 generations of cameras on Atom-based laptops, tablets and cell
phones. So, it seems worth investing time to cleanup this driver and
making it in good shape.
- Added some V4L2 core ancillary routines to help with h264 codecs;
- Added an ov2740 image sensor driver;
- The si2157 gained support for Analog TV, which, in turn, added
support for some cx231xx and cx23885 boards to also support analog
standards;
- Added some V4L2 controls (V4L2_CID_CAMERA_ORIENTATION and
V4L2_CID_CAMERA_SENSOR_ROTATION) to help identifying where the camera
is located at the device;
- VIDIOC_ENUM_FMT was extended to support MC-centric devices;
- Lots of drivers improvements and cleanups.
* tag 'media/v5.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (503 commits)
media: Documentation: media: Refer to mbus format documentation from CSI-2 docs
media: s5k5baf: Replace zero-length array with flexible-array
media: i2c: imx219: Drop <linux/clk-provider.h> and <linux/clkdev.h>
media: i2c: Add ov2740 image sensor driver
media: ov8856: Implement sensor module revision identification
media: ov8856: Add devicetree support
media: dt-bindings: ov8856: Document YAML bindings
media: dvb-usb: Add Cinergy S2 PCIe Dual Port support
media: dvbdev: Fix tuner->demod media controller link
media: dt-bindings: phy: phy-rockchip-dphy-rx0: move rockchip dphy rx0 bindings out of staging
media: staging: dt-bindings: phy-rockchip-dphy-rx0: remove non-used reg property
media: atomisp: unify the version for isp2401 a0 and b0 versions
media: atomisp: update TODO with the current data
media: atomisp: adjust some code at sh_css that could be broken
media: atomisp: don't produce errs for ignored IRQs
media: atomisp: print IRQ when debugging
media: atomisp: isp_mmu: don't use kmem_cache
media: atomisp: add a notice about possible leak resources
media: atomisp: disable the dynamic and reserved pools
media: atomisp: turn on camera before setting it
...
- Enable RTC and ADC support of RN5T618 PMIC in imx_v6_v7_defconfig.
- Enable i.MX8DXL pinctrl driver support in arm64 defconfig.
-----BEGIN PGP SIGNATURE-----
iQFIBAABCgAyFiEEFmJXigPl4LoGSz08UFdYWoewfM4FAl7Ij6IUHHNoYXduZ3Vv
QGtlcm5lbC5vcmcACgkQUFdYWoewfM5peQf+N9PmhSdT/xgWUsudpYBTFGxZ7CP2
mkt86Qxdw5MboaR0Z+L1fsNRYglWU14Hn9GTvPmcoN7VTx6nDJnC55F5xWmP7r1C
ZgI9hH1jZG/jEWJAJmp0sZIBuaZJegUmbD1Pk3dOIMwv/9hEGtj2nI05QuUaTKof
qa8KxSwvYZSd8SKZHDoEl/E6yZZjNIlfMsv6BKTbRfqMHrixZ1y54muNNLKuca3v
hoI4I+AYPy3XhhACjYR3mhSVUF2pCVOpUcFktKdH+ZTLXX/dShMec5vyLwws+CEi
Oldg3J98qkDMnmMXV/1RLvYI/CIR6v7GbsashfinSAeeut6uPz4kgVyhpA==
=kqAi
-----END PGP SIGNATURE-----
Merge tag 'imx-defconfig-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/defconfig
i.MX defconfig update for 5.8:
- Enable RTC and ADC support of RN5T618 PMIC in imx_v6_v7_defconfig.
- Enable i.MX8DXL pinctrl driver support in arm64 defconfig.
* tag 'imx-defconfig-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
ARM: imx_v6_v7_defconfig: extend RN5T618 PMIC family support
arm64: defconfig: Enable CONFIG_PINCTRL_IMX8DXL by default
Link: https://lore.kernel.org/r/20200523032516.11016-6-shawnguo@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
As these boards have no more users nor testers, and patching them has
become a burden, be that because of the PCI part or the MTD NAND
support, let's remove them.
The cm-x300 will for now remain and represent Compulab boards at its
best in the PXA department.
Link: https://lore.kernel.org/r/20200521185140.27276-1-robert.jarzmik@free.fr
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Acked-by: Mike Rapoport <rppt@kernel.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
defconfig to enable the audio codec in sunxi_defconfig.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQRcEzekXsqa64kGDp7j7w1vZxhRxQUCXr7MmQAKCRDj7w1vZxhR
xYFJAQC7OE0ip7aQrJY24AXQgeA1abiQ1+P1oHbHW6E7qnXiGgD9Exd18pO1N1JH
URcmEMjg8plFQn9+gGcHy7VFhE5V8w8=
=ut84
-----END PGP SIGNATURE-----
Merge tag 'sunxi-config-for-5.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into arm/defconfig
Two patches to enable the new cpufreq support on the H6 for the arm64
defconfig to enable the audio codec in sunxi_defconfig.
* tag 'sunxi-config-for-5.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
arm64: configs: Enable sun50i cpufreq nvmem
ARM: configs: sunxi: Add sun8i analog codec
Link: https://lore.kernel.org/r/9fd4d403-f6c8-420d-8b03-62e8485a0b3d.lettre@localhost
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- Enable support for the new RZ/G1H SoC in the shmobile and multi_v7
defconfigs.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQ9qaHoIs/1I4cXmEiKwlD9ZEnxcAUCXr5fqAAKCRCKwlD9ZEnx
cLL+AP4qfjbDM073NG9nuiSssmswLezSrHqssSCabZ2Gx9ubegD9ERfeW4jX+6+o
VVSMvqH2paZNiuSUs2lJI/rSjJ23KA8=
=pMSS
-----END PGP SIGNATURE-----
Merge tag 'renesas-arm-defconfig-for-v5.8-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into arm/defconfig
Renesas ARM defconfig updates for v5.8 (take two)
- Enable support for the new RZ/G1H SoC in the shmobile and multi_v7
defconfigs.
* tag 'renesas-arm-defconfig-for-v5.8-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel:
ARM: multi_v7_defconfig: Enable r8a7742 SoC
ARM: shmobile: defconfig: Enable r8a7742 SoC
Link: https://lore.kernel.org/r/20200515100547.14671-2-geert+renesas@glider.be
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
1. Enable drivers for Exynos3250 Rinato Bluetooth,
2. Build WiFi mac80211 framework as module so it will get loaded the
same time as regulatory data.
-----BEGIN PGP SIGNATURE-----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=aCxj
-----END PGP SIGNATURE-----
Merge tag 'samsung-defconfig-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into arm/defconfig
Samsung defconfig changes for v5.8
1. Enable drivers for Exynos3250 Rinato Bluetooth,
2. Build WiFi mac80211 framework as module so it will get loaded the
same time as regulatory data.
* tag 'samsung-defconfig-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
ARM: exynos_defconfig: Compile MAC80211/CFG80211 as modules
ARM: exynos_defconfig: Enable serial bus and BCM HCIUART drivers
Link: https://lore.kernel.org/r/20200512122922.5700-1-krzk@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
updates for v5.8, please pull the following:
- Nicolas enables the fixed-regulator in bcm2835_defconfig which is need
to control the Raspberry Pi 4 SD car power supply
-----BEGIN PGP SIGNATURE-----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=LMD6
-----END PGP SIGNATURE-----
Merge tag 'arm-soc/for-5.8/defconfig' of https://github.com/Broadcom/stblinux into arm/defconfig
This pull request contains Broadcom ARM-based SoCs defconfig file
updates for v5.8, please pull the following:
- Nicolas enables the fixed-regulator in bcm2835_defconfig which is need
to control the Raspberry Pi 4 SD car power supply
* tag 'arm-soc/for-5.8/defconfig' of https://github.com/Broadcom/stblinux:
ARM: bcm2835_defconfig: Enable fixed-regulator
Link: https://lore.kernel.org/r/20200511210522.28243-1-f.fainelli@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- Refresh shmobile_defconfig for v5.7-rc1.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQ9qaHoIs/1I4cXmEiKwlD9ZEnxcAUCXqqEUgAKCRCKwlD9ZEnx
cGICAQDav5TgQ510pgY+N73kKI5QvVn1jDdpM22pIS45V9m8KQD9EtFAilc4s1yI
kYryOSflL9tjubS+SxjwAs4fCMdPtgc=
=dHzW
-----END PGP SIGNATURE-----
Merge tag 'renesas-arm-defconfig-for-v5.8-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into arm/defconfig
Renesas ARM defconfig updates for v5.8
- Refresh shmobile_defconfig for v5.7-rc1.
* tag 'renesas-arm-defconfig-for-v5.8-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel:
ARM: shmobile: defconfig: Refresh for v5.7-rc1
Link: https://lore.kernel.org/r/20200430084849.1457-2-geert+renesas@glider.be
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
v5.7 merge window:
- Enable drivers for the Golden and Skomer mobile phones.
- Enable drivers for the HREF520 reference design.
-----BEGIN PGP SIGNATURE-----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=mEUB
-----END PGP SIGNATURE-----
Merge tag 'ux500-defconfig-v5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson into arm/defconfig
Ux500 defconfig changes for functionality merged in the
v5.7 merge window:
- Enable drivers for the Golden and Skomer mobile phones.
- Enable drivers for the HREF520 reference design.
* tag 'ux500-defconfig-v5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson:
ARM: defconfig: u8500: Enable new drivers for ux500
ARM: defconfig: u8500: Enable new drivers for samsung-golden
Link: https://lore.kernel.org/r/CACRpkdaxT8dc=mhAd51+KtQ0K4Uj5tttt36bYJLqP_hNfWXP8w@mail.gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
There are new drivers for functionality of that family
(RTC and ADC), so enable them, since they are used by
various i.MX6 boards.
Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
Reviewed-by: Dong Aisheng <aisheng.dong@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
My recent commit b6d49cab44 ("net: Make PTP-specific drivers depend on
PTP_1588_CLOCK") exposes a missing dependency in defconfigs that select
TI_CPTS without selecting PTP_1588_CLOCK, leading to linker errors of the
form:
drivers/net/ethernet/ti/cpsw.o: in function `cpsw_ndo_stop':
cpsw.c:(.text+0x680): undefined reference to `cpts_unregister'
...
That's because TI_CPTS_MOD (which is the symbol gating the _compilation_ of
cpts.c) now depends on PTP_1588_CLOCK, and so is not enabled in these
configurations, but TI_CPTS (which is the symbol gating _calls_ to the cpts
functions) _is_ enabled. So we end up compiling calls to functions that
don't exist, resulting in the linker errors.
This patch fixes build errors and restores previous behavior by:
- ensure PTP_1588_CLOCK=y in TI specific configs and CPTS will be built
- remove TI_CPTS_MOD and, instead, add dependencies from CPTS in
TI_CPSW/TI_KEYSTONE_NETCP/TI_CPSW_SWITCHDEV as below:
config TI_CPSW_SWITCHDEV
...
depends on TI_CPTS || !TI_CPTS
which will ensure proper dependencies PTP_1588_CLOCK -> TI_CPTS ->
TI_CPSW/TI_KEYSTONE_NETCP/TI_CPSW_SWITCHDEV and build type selection.
Note. For NFS boot + CPTS all of above configs have to be built-in.
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Dan Murphy <dmurphy@ti.com>
Cc: Tony Lindgren <tony@atomide.com>
Fixes: b6d49cab44 ("net: Make PTP-specific drivers depend on PTP_1588_CLOCK")
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Clay McClure <clay@daemons.net>
[grygorii.strashko@ti.com: rewording, add deps cpsw/netcp from cpts, drop IS_REACHABLE]
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Tested-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The new device tree for samsung-skomer and the HREF520
devicetree enables some additional drivers that are not yet
selected in the u8500_defconfig:
- The GPIO-based I2C bus master driver for some peripherals
that do not use the I2C hardware master.
- The Novatek NT35510 driver for the Skomer panel.
- The Sony ACX424AKP driver for the HREF520 panel.
- The GPIO-based backlight driver for Skomer.
- The BMA180 driver for the BMA254 accelerometer found in the
Skomer.
- The new GP2AP002 driver for the GP2AP002S00F proximimty sensor
found in the Skomer and Golden devices.
Cc: Stephan Gerhold <stephan@gerhold.net>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Update the defconfig for Renesas ARM boards:
- Enable CONFIG_DRM_DISPLAY_CONNECTOR (for HDMI, VGA, and composite
display connectors on various R-Car H1, Gen2, and RZ/G1 boards,
since commit 0c275c3017 ("drm/bridge: Add bridge driver for
display connectors")).
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20200415124923.2510-1-geert+renesas@glider.be
Most CEC platform drivers are using VIDEO_*_CEC pattern, some with
an _HDMI extension too.
Well, they're not related to V4L2 support, and we don't really
need those big config names. So drop VIDEO_* from them, remove
_HDMI (if present) and move CEC to the start.
This way, all platform driver options are now CEC_<driver>.
Acked-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The new device tree for samsung-golden depends on some additional
drivers that are not selected in the u8500 defconfig yet:
- Bluetooth: hci_bcm
- WiFi: brcmfmac
- Touchscreen: atmel_mxt_ts
- Vibrator: gpio-vibra
- Sensors: inv_mpu6050 (IMU)
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Link: https://lore.kernel.org/r/20191219202052.19039-10-stephan@gerhold.net
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
On my orange pi PC, I got lot of "sun4i-codec 1c22c00.codec: Failed to register our card".
This was due to a missing component: the sun8i analog codec.
Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
MAC80211/CFG80211 framework requires loading regulatory.db from
/lib/firmware directory, so it makes very little sense to have it
built-in. Change it to be built as modules to let it properly load the
needed firmware/db files. As a side effect of this change, the size of
the compressed modules on SquashFS increased significantly from 27MiB
to 38MiB, so increase the size of BLK_DEV_RAM to allow the modules to
fit into it.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Enable serial bus and BCM HCIUART Bluetooth drivers available on the
Exynos3250-based Rinato board.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
As usual, tons of new drivers and other options got merged and
are now enabled in the defconfig files, usually as loadable modules.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-----BEGIN PGP SIGNATURE-----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=NkVs
-----END PGP SIGNATURE-----
Merge tag 'arm-defconfig-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM defconfig updates from Arnd Bergmann:
"As usual, tons of new drivers and other options got merged and are now
enabled in the defconfig files, usually as loadable modules"
* tag 'arm-defconfig-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (45 commits)
ARM: omap2plus_defconfig: Update for moved and dropped options
ARM: omap2plus_defconfig: Enable ina2xx_adc as a loadable module
ARM: omap2plus_defconfig: Enable McPDM optional PMIC clock as modules
ARM: omap2plus_defconfig: Enable more droid4 devices as loadable modules
ARM: omap2plus_defconfig: Enable zram as loadable modules
ARM: omap2plus_defconfig: Enable simple-pm-bus
arm64: defconfig: Enable Qualcomm SDM845 audio configs
arm64: defconfig: Enable e1000 device
arm64: defconfig: Enable PHY devices used on QorIQ boards
arm64: defconfig: Enable RTC devices for QorIQ boards
arm64: defconfig: Enable flash device drivers for QorIQ boards
arm64: defconfig: Enable ARM Mali display driver
arm64: defconfig: Enable QorIQ GPIO driver
arm64: defconfig: Enable QorIQ IFC NAND controller driver
arm64: defconfig: Enable ARM SBSA watchdog driver
arm64: defconfig: Enable QorIQ cpufreq driver
arm64: defconfig: Enable NXP/FSL SPI controller drivers
arm64: defconfig: Enable ENETC Ethernet controller and FELIX switch
arm64: defconfig: Enable QorIQ DPAA2 drivers
arm64: defconfig: Enable QorIQ DPAA1 drivers
...
The code changes are mostly for 32-bit platforms and include:
- Lots of updates for the Nvidia Tegra platform, including
cpuidle, pmc, and dt-binding changes
- Microchip at91 power management updates for the recently added
sam9x60 SoC
- Treewide setup_irq deprecation by afzal mohammed
- STMicroelectronics stm32 gains earlycon support
- Renesas platforms with Cortex-A9 can now use the global timer
- Some TI OMAP2+ platforms gain cpuidle support
- Various cleanups for the i.MX6 and Orion platforms, as well as
Kconfig files across all platforms
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-----BEGIN PGP SIGNATURE-----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=UTk1
-----END PGP SIGNATURE-----
Merge tag 'arm-soc-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC updates from Arnd Bergmann:
"The code changes are mostly for 32-bit platforms and include:
- Lots of updates for the Nvidia Tegra platform, including cpuidle,
pmc, and dt-binding changes
- Microchip at91 power management updates for the recently added
sam9x60 SoC
- Treewide setup_irq deprecation by afzal mohammed
- STMicroelectronics stm32 gains earlycon support
- Renesas platforms with Cortex-A9 can now use the global timer
- Some TI OMAP2+ platforms gain cpuidle support
- Various cleanups for the i.MX6 and Orion platforms, as well as
Kconfig files across all platforms"
* tag 'arm-soc-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (75 commits)
ARM: qcom: Add support for IPQ40xx
ARM: mmp: replace setup_irq() by request_irq()
ARM: cns3xxx: replace setup_irq() by request_irq()
ARM: spear: replace setup_irq() by request_irq()
ARM: ep93xx: Replace setup_irq() by request_irq()
ARM: iop32x: replace setup_irq() by request_irq()
arm: mach-dove: Mark dove_io_desc as __maybe_unused
ARM: orion: replace setup_irq() by request_irq()
ARM: debug: stm32: add UART early console support for STM32MP1
ARM: debug: stm32: add UART early console support for STM32H7
ARM: debug: stm32: add UART early console configuration for STM32F7
ARM: debug: stm32: add UART early console configuration for STM32F4
cpuidle: tegra: Disable CC6 state if LP2 unavailable
cpuidle: tegra: Squash Tegra114 driver into the common driver
cpuidle: tegra: Squash Tegra30 driver into the common driver
cpuidle: Refactor and move out NVIDIA Tegra20 driver into drivers/cpuidle
ARM: tegra: cpuidle: Remove unnecessary memory barrier
ARM: tegra: cpuidle: Make abort_flag atomic
ARM: tegra: cpuidle: Handle case where secondary CPU hangs on entering LP2
ARM: tegra: Make outer_disable() open-coded
...
update changing all our txt files to rst ones. Excluding that, we
have the usual driver updates (qla2xxx, ufs, lpfc, zfcp, ibmvfc,
pm80xx, aacraid), a treewide update for scnprintf and some other minor
updates. The major core update is Hannes moving functions out of the
aacraid driver and into the core.
Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com>
-----BEGIN PGP SIGNATURE-----
iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCXoYKiyYcamFtZXMuYm90
dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishSasAP4iGwSB
Y8tFaZgWadu76+wj5MdqTBoXdhnIuFF0rZG3pQEAiIKdsfQlbSFdm75+gUtx5hG/
GOilX/pJczTRJDCGNis=
=g7Sk
-----END PGP SIGNATURE-----
Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI updates from James Bottomley:
"This series has a huge amount of churn because it pulls in Mauro's doc
update changing all our txt files to rst ones.
Excluding that, we have the usual driver updates (qla2xxx, ufs, lpfc,
zfcp, ibmvfc, pm80xx, aacraid), a treewide update for scnprintf and
some other minor updates.
The major core change is Hannes moving functions out of the aacraid
driver and into the core"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (223 commits)
scsi: aic7xxx: aic97xx: Remove FreeBSD-specific code
scsi: ufs: Do not rely on prefetched data
scsi: dc395x: remove dc395x_bios_param
scsi: libiscsi: Fix error count for active session
scsi: hpsa: correct race condition in offload enabled
scsi: message: fusion: Replace zero-length array with flexible-array member
scsi: qedi: Add PCI shutdown handler support
scsi: qedi: Add MFW error recovery process
scsi: ufs: Enable block layer runtime PM for well-known logical units
scsi: ufs-qcom: Override devfreq parameters
scsi: ufshcd: Let vendor override devfreq parameters
scsi: ufshcd: Update the set frequency to devfreq
scsi: ufs: Resume ufs host before accessing ufs device
scsi: ufs-mediatek: customize the delay for enabling host
scsi: ufs: make HCE polling more compact to improve initialization latency
scsi: ufs: allow custom delay prior to host enabling
scsi: ufs-mediatek: use common delay function
scsi: ufs: introduce common and flexible delay function
scsi: ufs: use an enum for host capabilities
scsi: ufs: fix uninitialized tx_lanes in ufshcd_disable_tx_lcc()
...
* GICv4.1 support
* 32bit host removal
PPC:
* secure (encrypted) using under the Protected Execution Framework
ultravisor
s390:
* allow disabling GISA (hardware interrupt injection) and protected
VMs/ultravisor support.
x86:
* New dirty bitmap flag that sets all bits in the bitmap when dirty
page logging is enabled; this is faster because it doesn't require bulk
modification of the page tables.
* Initial work on making nested SVM event injection more similar to VMX,
and less buggy.
* Various cleanups to MMU code (though the big ones and related
optimizations were delayed to 5.8). Instead of using cr3 in function
names which occasionally means eptp, KVM too has standardized on "pgd".
* A large refactoring of CPUID features, which now use an array that
parallels the core x86_features.
* Some removal of pointer chasing from kvm_x86_ops, which will also be
switched to static calls as soon as they are available.
* New Tigerlake CPUID features.
* More bugfixes, optimizations and cleanups.
Generic:
* selftests: cleanups, new MMU notifier stress test, steal-time test
* CSV output for kvm_stat.
KVM/MIPS has been broken since 5.5, it does not compile due to a patch committed
by MIPS maintainers. I had already prepared a fix, but the MIPS maintainers
prefer to fix it in generic code rather than KVM so they are taking care of it.
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAl6GOnIUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroMfxwf/ZKLZiRoaovXCOG71M/eHtQb8ZIqU
3MPy+On3eC5Sk/aBxWUL9EFZsbYG6kYdbZ1VOvG9XPBoLlnkDSm/IR0kaELHtnjj
oGVda/tvGn46Ne39y8xBptmb91WDcWH0vFthT/CwlMxAw3xjr+gG7Qyo+8F2CW6m
SSSuLiHSBnyO1cQKruBTHZ8qnR8LlnfXEqtd6Y4LFLic0LbLIoIdRcT3wjQrcZrm
Djd7wbTEYZjUfoqZ72ekwEDUsONcDLDSKcguDO9pSMSCGhpxCVT5Vy68KRpoIMs2
nzNWDKjvqQo5zb2+GWxJgkd12Hv+n7PCXZMbVrWBu1pQsewUns9m4mkpGw==
=6fGt
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm updates from Paolo Bonzini:
"ARM:
- GICv4.1 support
- 32bit host removal
PPC:
- secure (encrypted) using under the Protected Execution Framework
ultravisor
s390:
- allow disabling GISA (hardware interrupt injection) and protected
VMs/ultravisor support.
x86:
- New dirty bitmap flag that sets all bits in the bitmap when dirty
page logging is enabled; this is faster because it doesn't require
bulk modification of the page tables.
- Initial work on making nested SVM event injection more similar to
VMX, and less buggy.
- Various cleanups to MMU code (though the big ones and related
optimizations were delayed to 5.8). Instead of using cr3 in
function names which occasionally means eptp, KVM too has
standardized on "pgd".
- A large refactoring of CPUID features, which now use an array that
parallels the core x86_features.
- Some removal of pointer chasing from kvm_x86_ops, which will also
be switched to static calls as soon as they are available.
- New Tigerlake CPUID features.
- More bugfixes, optimizations and cleanups.
Generic:
- selftests: cleanups, new MMU notifier stress test, steal-time test
- CSV output for kvm_stat"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (277 commits)
x86/kvm: fix a missing-prototypes "vmread_error"
KVM: x86: Fix BUILD_BUG() in __cpuid_entry_get_reg() w/ CONFIG_UBSAN=y
KVM: VMX: Add a trampoline to fix VMREAD error handling
KVM: SVM: Annotate svm_x86_ops as __initdata
KVM: VMX: Annotate vmx_x86_ops as __initdata
KVM: x86: Drop __exit from kvm_x86_ops' hardware_unsetup()
KVM: x86: Copy kvm_x86_ops by value to eliminate layer of indirection
KVM: x86: Set kvm_x86_ops only after ->hardware_setup() completes
KVM: VMX: Configure runtime hooks using vmx_x86_ops
KVM: VMX: Move hardware_setup() definition below vmx_x86_ops
KVM: x86: Move init-only kvm_x86_ops to separate struct
KVM: Pass kvm_init()'s opaque param to additional arch funcs
s390/gmap: return proper error code on ksm unsharing
KVM: selftests: Fix cosmetic copy-paste error in vm_mem_region_move()
KVM: Fix out of range accesses to memslots
KVM: X86: Micro-optimize IPI fastpath delay
KVM: X86: Delay read msr data iff writes ICR MSR
KVM: PPC: Book3S HV: Add a capability for enabling secure guests
KVM: arm64: GICv4.1: Expose HW-based SGIs in debugfs
KVM: arm64: GICv4.1: Allow non-trapping WFI when using HW SGIs
...
A series of changes from Dave Gerlach to enable basic cpuidle support
for am335x and am437x based on generic cpuidle-arm driver.
-----BEGIN PGP SIGNATURE-----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=nQLE
-----END PGP SIGNATURE-----
Merge tag 'omap-for-v5.7/pm33xx-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/soc
PM changes for am335x and am437x for v5.7 merge window
A series of changes from Dave Gerlach to enable basic cpuidle support
for am335x and am437x based on generic cpuidle-arm driver.
* tag 'omap-for-v5.7/pm33xx-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: omap2plus_defconfig: Add CONFIG_ARM_CPUIDLE
soc: ti: pm33xx: Add base cpuidle support
ARM: OMAP2+: pm33xx-core: Extend platform_data ops for cpuidle
ARM: OMAP2+: pm33xx-core: Add cpuidle_ops for am335x/am437x
dt-bindings: arm: cpu: Add TI AM335x and AM437x enable method
Link: https://lore.kernel.org/r/pull-1583511417-919838@atomide.com-2
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- Add sama5d4 watchdog to at91_dt_defconfig as it is present on sam9x60
-----BEGIN PGP SIGNATURE-----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=27k/
-----END PGP SIGNATURE-----
Merge tag 'at91-5.7-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux into arm/config
AT91 defconfig for 5.7
- Add sama5d4 watchdog to at91_dt_defconfig as it is present on sam9x60
* tag 'at91-5.7-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux:
ARM: configs: at91: enable sama5d4 compatible watchdog
Link: https://lore.kernel.org/r/20200322085711.GA208700@piout.net
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
We want to enable some more features for omap2plus_defconfig to make it
more usable:
- Enable scururity for ext4 so setcap works
- Enable simple-pm-bus so it can be later on be configured in the dts
files as needed
- Enable zram as loadable modules as we do have devices using it
- Enable more devices for droid4 for 1-wire battery eeprom and isl29028
proximity sensor
- Enable mcpdm clocks from the PMIC as loadable modules
- Enable ina2xx_adc as loadable module
- And finally let's also omap2plus_deconfig for moved and dropped options
-----BEGIN PGP SIGNATURE-----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=Icp5
-----END PGP SIGNATURE-----
Merge tag 'omap-for-v5.7/defconfig-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/config
Defconfig changes for omaps for v5.7 merge window
We want to enable some more features for omap2plus_defconfig to make it
more usable:
- Enable scururity for ext4 so setcap works
- Enable simple-pm-bus so it can be later on be configured in the dts
files as needed
- Enable zram as loadable modules as we do have devices using it
- Enable more devices for droid4 for 1-wire battery eeprom and isl29028
proximity sensor
- Enable mcpdm clocks from the PMIC as loadable modules
- Enable ina2xx_adc as loadable module
- And finally let's also omap2plus_deconfig for moved and dropped options
* tag 'omap-for-v5.7/defconfig-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: omap2plus_defconfig: Update for moved and dropped options
ARM: omap2plus_defconfig: Enable ina2xx_adc as a loadable module
ARM: omap2plus_defconfig: Enable McPDM optional PMIC clock as modules
ARM: omap2plus_defconfig: Enable more droid4 devices as loadable modules
ARM: omap2plus_defconfig: Enable zram as loadable modules
ARM: omap2plus_defconfig: Enable simple-pm-bus
ARM: omap2plus_defconfig: Enable ext4 security for setcap
Link: https://lore.kernel.org/r/pull-1584575344-983293@atomide.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- A seris from Li Yang to make defconfig useful for NXP LS family SoCs.
Most drivers are built as module there, but those helping boot system
with NFS are enabled built-in.
- Enable i.MX8MP pinctrl and i.MX8MM thermal driver support in
defconfig.
- Enable i.MX DRM driver support for multi_v7_defconfig.
- Enable ATMEL_MXT and AD7879 touch support for imx_v6_v7_defconfig.
-----BEGIN PGP SIGNATURE-----
iQFIBAABCgAyFiEEFmJXigPl4LoGSz08UFdYWoewfM4FAl5xnT0UHHNoYXduZ3Vv
QGtlcm5lbC5vcmcACgkQUFdYWoewfM7/cwf/W3mjSLA4MhY8brUydqYYlPTPDhZT
ZNvQLG8/dfeCnfuTF9Z8kXTkEXI+CgyzzLwWvRSxPDIvCcxFV38yjWEWodMWSMPc
gTPMHkRRCu63VuE0suwDSDsaPn4/g3s5E51kFzSoEnSSy0n+fVmXJosVoB9bEDNF
o15R3qT7leFwoR+bAB+h7X8EloPCC7QzZKpKZfNlIFfDd6aMObo1++HY+FqeNy7S
88lD+JdW2yyoj9r9Qkx3k/c3Hh+1uMysIM8FsVqeYSPGSrN8eK+wA5CqtHQ3TF8/
jcB7LdH0US8qL3oSnweCuT3Pb6zRtQwrsnpMZVR7Urue6Thq9i08jVuvUw==
=5yPc
-----END PGP SIGNATURE-----
Merge tag 'imx-defconfig-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/config
i.MX defconfig changes for 5.7:
- A seris from Li Yang to make defconfig useful for NXP LS family SoCs.
Most drivers are built as module there, but those helping boot system
with NFS are enabled built-in.
- Enable i.MX8MP pinctrl and i.MX8MM thermal driver support in
defconfig.
- Enable i.MX DRM driver support for multi_v7_defconfig.
- Enable ATMEL_MXT and AD7879 touch support for imx_v6_v7_defconfig.
* tag 'imx-defconfig-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (22 commits)
arm64: defconfig: Enable e1000 device
arm64: defconfig: Enable PHY devices used on QorIQ boards
arm64: defconfig: Enable RTC devices for QorIQ boards
arm64: defconfig: Enable flash device drivers for QorIQ boards
arm64: defconfig: Enable ARM Mali display driver
arm64: defconfig: Enable QorIQ GPIO driver
arm64: defconfig: Enable QorIQ IFC NAND controller driver
arm64: defconfig: Enable ARM SBSA watchdog driver
arm64: defconfig: Enable QorIQ cpufreq driver
arm64: defconfig: Enable NXP/FSL SPI controller drivers
arm64: defconfig: Enable ENETC Ethernet controller and FELIX switch
arm64: defconfig: Enable QorIQ DPAA2 drivers
arm64: defconfig: Enable QorIQ DPAA1 drivers
arm64: defconfig: Enable NXP flexcan driver
arm64: defconfig: run through savedefconfig for ordering
arm64: defconfig: Enable CONFIG_IMX8MM_THERMAL as module
arm64: defconfig: add i.MX system controller thermal support
ARM: multi_v7_defconfig: enable drm imx support
arm64: defconfig: Enable CONFIG_PCIE_LAYERSCAPE_GEN4
ARM: imx_v6_v7_defconfig: Enable TOUCHSCREEN_AD7879
...
Link: https://lore.kernel.org/r/20200318051918.32579-6-shawnguo@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Enable QRTR and the Broadcomm bluetooth driver in the qcom_defconfig,
for usage on the 8974 devices.
-----BEGIN PGP SIGNATURE-----
iQJPBAABCAA5FiEEBd4DzF816k8JZtUlCx85Pw2ZrcUFAl5xpIMbHGJqb3JuLmFu
ZGVyc3NvbkBsaW5hcm8ub3JnAAoJEAsfOT8Nma3FPfEP/1LAgxraodf3d+V/Qb5i
LiMj9JVFrx1r8xeH9hMEvoJzjvaj9aCHVkRyO4eZaqPvSDnHqGKUajhzJBldxQzc
RXGOhCwuw+ZkMi9ilCoVDUIFXbysvOPWZiJvzhvux4DT1r+L1uOyFwze3VQDr24g
QJQkXyzg0bbTx1I5O4hi0mBZ/A6wj0CxhIDZAF3dzKOhZsobuZ7ZqFeTIDqRuG73
/vH4pWBSg3TELL65GbOQyK1YvD4K27CRmILi0M8OX9v67NppAIElSZfqg7H0j6Ec
2I/ueWqQ6E4d96E3x984EgGIQcDPk9n2J17GfEEn2RTfhUfq711IQJUG/tnzLT9g
F7LbK/M83SU3ejZ3nH/nbDhEUaz60drwFZQOZ5X971kr6bvFhsaCbKd0FA1FmzrO
LvoJU9pxagil5fO9FKNWcoCoCrXyfA4hR6oT9jQVj09PvRQ/A9TrGj+Vi7kSssuC
i5Q9hZ9VzwE0fSNPw9F6qwCsR+qOHkOIV95R+ghJOj+x5jOrOrfEPf5BcbOG6iiu
l3QIrwRPvA0g5u5fcQcv8nHNd97XCpRSUaYLgX+0uzw//IeLUYopWa3yLncZfGVl
Hwn6P3OfW2dZYUXOLwrtKmLFi8yUmpFbqkJaNpNBWDXqrdZVhHDHtb3dl3+dZyyA
dAFF8AYncYisnUA1m0+qFOlj
=RP0d
-----END PGP SIGNATURE-----
Merge tag 'qcom-defconfig-for-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/config
Qualcomm ARM defconfig updates for v5.7
Enable QRTR and the Broadcomm bluetooth driver in the qcom_defconfig,
for usage on the 8974 devices.
* tag 'qcom-defconfig-for-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
ARM: qcom_defconfig: Enable QRTR
ARM: qcom_defconfig: add Broadcom bluetooth options
Link: https://lore.kernel.org/r/20200318043931.GC470201@yoga
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
1. Enable Energy Model and Multi-core scheduler because they fit common
use of Exynos SoCs - mobile devices,
2. Enable more drivers for GalaxyS3/Trats2.
-----BEGIN PGP SIGNATURE-----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=KSB7
-----END PGP SIGNATURE-----
Merge tag 'samsung-defconfig-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into arm/config
Samsung defconfig changes for v5.7
1. Enable Energy Model and Multi-core scheduler because they fit common
use of Exynos SoCs - mobile devices,
2. Enable more drivers for GalaxyS3/Trats2.
* tag 'samsung-defconfig-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
ARM: exynos_defconfig: Add more drivers for GalaxyS3/Trats2
ARM: exynos_defconfig: Enable SCHED_MC and ENERGY_MODEL
ARM: exynos_defconfig: Enable SquashFS and increase RAM block device size
Link: https://lore.kernel.org/r/20200316175652.5604-2-krzk@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
v5.7, please pull the following:
- Marek enables the Raspberry Pi 4 specific drivers: GENET, thermal, and
GPIO regulator support in bcm2835_defconfig
-----BEGIN PGP SIGNATURE-----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=XFZP
-----END PGP SIGNATURE-----
Merge tag 'arm-soc/for-5.7/defconfig' of https://github.com/Broadcom/stblinux into arm/config
This pull request contains Broadcom ARM-based SoCs defconfig changes for
v5.7, please pull the following:
- Marek enables the Raspberry Pi 4 specific drivers: GENET, thermal, and
GPIO regulator support in bcm2835_defconfig
* tag 'arm-soc/for-5.7/defconfig' of https://github.com/Broadcom/stblinux:
ARM: bcm2835_defconfig: add support for Raspberry Pi4
Link: https://lore.kernel.org/r/20200311212012.9418-1-f.fainelli@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Only one platform is building KVM by default. How crazy! Remove
it whilst nobody is watching.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Acked-by: Olof Johansson <olof@lixom.net>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Will Deacon <will@kernel.org>
Acked-by: Vladimir Murzin <vladimir.murzin@arm.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Christoffer Dall <christoffer.dall@arm.com>
Looks like CONFIG_MTD_M25P80 no longer exists and the others just
move around the existing options. This makes it easier to create
patches against omap2plus_defconfig.
Signed-off-by: Tony Lindgren <tony@atomide.com>
Some devices have ina2xx_adc on i2c for measuring power consumption
and can nowadays just read the output via IIO.
Signed-off-by: Tony Lindgren <tony@atomide.com>
The McPDM module is only usable on hardware where it's module clock
is wired to the PMIC. Let's enable the optional PMIC module clocks
for this so boards can use McPDM.
Signed-off-by: Tony Lindgren <tony@atomide.com>
Enable more droid4 devices as loadable modules:
- We have an isl29028 proximity sensor
- Battery has an EEPROM that can be read with w1_ds250x
Signed-off-by: Tony Lindgren <tony@atomide.com>
Enable zram as loadable modules. This allows mounting some part of
memory as swap on low memory devices.
Signed-off-by: Tony Lindgren <tony@atomide.com>
We can use simple-pm-bus instead of simple-bus, let's enable it to allow
configuring it in dts files for using things like genpd.
Signed-off-by: Tony Lindgren <tony@atomide.com>
The Tegra CPU Idle driver was moved out into driver/cpuidle/ directory and
it is now a proper platform driver.
Acked-by: Peter De Schrijver <pdeschrijver@nvidia.com>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
The Tegra CPU Idle driver was moved out into driver/cpuidle/ directory and
it is now a proper platform driver.
Acked-by: Peter De Schrijver <pdeschrijver@nvidia.com>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAl5lkYceHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGpHQH/RJrzcaZHo4lw88m
Jf7vBZ9DYUlRgqE0pxTHWmodNObKRqpwOUGflUcWbb/7GD2LQUfeqhSECVQyTID9
N9y7FcPvx321Qhc3EkZ24DBYk0+DQ0K2FVUrSa/PxO0n7czxxXWaLRDmlSULEd3R
D4pVs3zEWOBXJHUAvUQ5R+lKfkeWKNeeepeh+rezuhpdWFBRNz4Jjr5QUJ8od5xI
sIwobYmESJqTRVBHqW8g2T2/yIsFJ78GCXs8DZLe1wxh40UbxdYDTA0NDDTHKzK6
lxzBgcmKzuge+1OVmzxLouNWMnPcjFlVgXWVerpSy3/SIFFkzzUWeMbqm6hKuhOn
wAlcIgI=
=VQUc
-----END PGP SIGNATURE-----
Merge v5.6-rc5 into drm-next
Requested my mripard for some misc patches that need this as a base.
Signed-off-by: Dave Airlie <airlied@redhat.com>
It will be useful to have it enabled for KernelCI boot and runtime
testing.
Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
- Add back DEBUG_FS for socfpga_defconfig
-----BEGIN PGP SIGNATURE-----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=TP3N
-----END PGP SIGNATURE-----
Merge tag 'socfpga_defconfig_fix_for_v5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux into arm/fixes
ARM: socfpga_defconfig: add back DEBUGFS
- Add back DEBUG_FS for socfpga_defconfig
* tag 'socfpga_defconfig_fix_for_v5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux:
ARM: socfpga_defconfig: Add back DEBUG_FS
Link: https://lore.kernel.org/r/20200304101917.1243-1-dinguyen@kernel.org
Signed-off-by: Olof Johansson <olof@lixom.net>
Commit 0e4a459f56 ("tracing: Remove unnecessary DEBUG_FS dependency")
removed select for DEBUG_FS but we still need it for development purposes.
Fixes: 0e4a459f56 ("tracing: Remove unnecessary DEBUG_FS dependency")
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
fixes for v5.6, please pull the following:
- Stefan restores CONFIG_DEBUG_FS from the bcm2835_defconfig which was
accidentally removed
-----BEGIN PGP SIGNATURE-----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=lqKv
-----END PGP SIGNATURE-----
Merge tag 'arm-soc/for-5.6/defconfig-fixes' of https://github.com/Broadcom/stblinux into arm/fixes
This pull request contains Broadcom ARM-based SoCs defconfig file(s)
fixes for v5.6, please pull the following:
- Stefan restores CONFIG_DEBUG_FS from the bcm2835_defconfig which was
accidentally removed
* tag 'arm-soc/for-5.6/defconfig-fixes' of https://github.com/Broadcom/stblinux:
ARM: bcm2835_defconfig: Explicitly restore CONFIG_DEBUG_FS
Link: https://lore.kernel.org/r/20200302195043.14513-1-f.fainelli@gmail.com
Signed-off-by: Olof Johansson <olof@lixom.net>
The commit 0e4a459f56 ("tracing: Remove unnecessary DEBUG_FS dependency")
accidentally dropped the DEBUG FS support in bcm2835_defconfig. So
restore the config as before the commit.
Reported-by: Marek Szyprowski <m.szyprowski@samsung.com>
Fixes: 0e4a459f56 ("tracing: Remove unnecessary DEBUG_FS dependency")
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Enable drivers for S5K6A3 and S5C73M3 camera sensors, AAT1290 flash LED,
Midas-TouchKey and BRCMFMAC SDIO-WIFI modules used on Samsung Galaxy S3
and Trats2 boards.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Add CONFIG_ARM_CPUIDLE and supporting CONFIG_DT_IDLE_STATES as am335x
and am437x will make use of these drivers.
Acked-by: Santosh Shilimkar <ssantosh@kernel.org>
Signed-off-by: Dave Gerlach <d-gerlach@ti.com>
Acked-by: Santosh Shilimkar <ssantosh@kernel.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
The TPD12S015, OPA362 and analog and HDMI connectors are now supported
by DRM bridge drivers, and the omapdrm HDMI and VENC outputs can be
handled through the drm_bridge API. Switch the outputs to drm_bridge by
making the next bridge mandatory and removing the related
omapdrm-specific display drivers.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Tested-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200226112514.12455-40-laurent.pinchart@ideasonboard.com
The dumb-vga-dac driver can support simple DRM bridges without being
limited to VGA DACs. Rename it to simple-bridge.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Acked-by: Maxime Ripard <mripard@kernel.org>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Tested-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200226112514.12455-12-laurent.pinchart@ideasonboard.com
This kernel configuration is basically enabling/disabling sr driver quirks
detection. While these quirks are for fairly rare devices (very old CD
burners, and a glucometer), the additional detection of these models is a
very minimal amount of code.
The logic behind the quirks is always built into the sr driver.
This also removes the config from all the defconfig files that are enabling
this already.
Link: https://lore.kernel.org/r/20200223191144.726-1-flameeyes@flameeyes.com
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Diego Elio Pettenò <flameeyes@flameeyes.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
There was a bit of an integration glitch with the LED backlight series.
The LED related parts got merged into v5.6-rc1, but the actual backlight
driver got left out.
This caused an issue on at least droid4 where the LCD backlight can not
yet be enabled automatically. And the LCD backlight can no longer be
enabled manually either via sysfs.
The integration glitch happened because some pending comments from me.
There was some confusion on which device tree property we should use for
the default brightness property.
After discussing how to fix this on the mailing lists, we came to the
conclusion that it's best to fix this issue properly by adding the
missing driver.
The other solutions would mean backpedaling and try to come up with some
temporary solution that really does not solve the issue for users. The
patch for led_bl.c has been around for quite a while and tested by many
users and was assumed to be merged as part of the LED backlight series.
For the brightness property to use, we ended up using the more common
"default-brightness-level" rather than "default-brightness" used by
some backlight drivers.
-----BEGIN PGP SIGNATURE-----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=Pox9
-----END PGP SIGNATURE-----
Merge tag 'omap-for-v5.6/droid4-lcd-fix-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/fixes
Fix LCD backlight issue for droid4
There was a bit of an integration glitch with the LED backlight series.
The LED related parts got merged into v5.6-rc1, but the actual backlight
driver got left out.
This caused an issue on at least droid4 where the LCD backlight can not
yet be enabled automatically. And the LCD backlight can no longer be
enabled manually either via sysfs.
The integration glitch happened because some pending comments from me.
There was some confusion on which device tree property we should use for
the default brightness property.
After discussing how to fix this on the mailing lists, we came to the
conclusion that it's best to fix this issue properly by adding the
missing driver.
The other solutions would mean backpedaling and try to come up with some
temporary solution that really does not solve the issue for users. The
patch for led_bl.c has been around for quite a while and tested by many
users and was assumed to be merged as part of the LED backlight series.
For the brightness property to use, we ended up using the more common
"default-brightness-level" rather than "default-brightness" used by
some backlight drivers.
* tag 'omap-for-v5.6/droid4-lcd-fix-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: dts: droid4: Configure LED backlight for lm3532
backlight: add led-backlight driver
Link: https://lore.kernel.org/r/pull-1582303901-96693@atomide.com
Signed-off-by: Olof Johansson <olof@lixom.net>
The Energy Model (EM) is needed to run Energy Aware Scheduler (EAS).
Enable ENERGY_MODEL to make that happen. This will increase energy
efficiency of the big.LITTLE platforms (e.g. Exynos5422) by smarter
decisions in scheduling tasks in non-heavy workloads.
Add SCHED_MC in order to create another level in scheduling domains: 'MC'.
This improves scheduler's decisions on platforms with CPU clusters, such
as big.LITTLE.
Signed-off-by: Lukasz Luba <lukasz.luba@arm.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
With the LED backlight changes merged, we still need the dts configured
to have backlight working for droid4. Based on an earlier patch from
Pavel Machek <pavel@ucw.cz>, let's configure the backlight but update
the value range to be more usable.
We have a range of 256 register values split into 8 steps, so we can
generate the brightness levels backwards with:
$ for i in 0 1 2 3 4 5 6 7; do echo "255 - ${i} * (256 / 8)" | bc; done
To avoid more confusion why the LCD backlight is still not on, let's
also enable LED backlight as a loadable module for omap2plus_defconfig.
Cc: Merlijn Wajer <merlijn@wizzup.org>
Cc: Pavel Machek <pavel@ucw.cz>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Tony Lindgren <tony@atomide.com>
All modules built from exynos_defconfig occupy about 55M, so enable
squashfs filesystem support and increase default ram block device size
to 32M to enable deploying them on initrd. Such initrd, using squashfs
requires at least 24M.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
The Computer on module Colibri iMX7S/iMX7D has
an AD7879 touchscreen controller.
This patch enables the TOUCHSCREEN_AD7879 and TOUCHSCREEN_AD7879_I2C
which support the mentioned controller in i2c mode.
Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Toradex iMX6/iMX7-based modules and boards support LCDs
with an MicroChip ATMXT1066T2 touchscreen controller.
This patch enables the TOUCHSCREEN_ATMEL_MXT which supports
MXT-series controllers, including the ATMXT1066T2.
Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Add Broadcom bluetooth options and serial bus in order to support
Bluetooth on the Nexus 5 phone.
Signed-off-by: Brian Masney <masneyb@onstation.org>
Link: https://lore.kernel.org/r/20200129232031.34538-2-masneyb@onstation.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Many sunxi based board needs CONFIG_SUN8I_THERMAL for thermal support.
Signed-off-by: Yangtao Li <tiny.windzz@gmail.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
CONFIG_MMC_BLOCK_BOUNCE is gone since commit c3dccb74be ("mmc: core:
Delete bounce buffer Kconfig option").
CONFIG_LBDAF is gone since commit 72deb455b5 ("block: remove
CONFIG_LBDAF").
CONFIG_IOSCHED_DEADLINE and CONFIG_IOSCHED_CFQ are gone since
commit f382fb0bce ("block: remove legacy IO schedulers").
The IOSCHED_DEADLINE was replaced by MQ_IOSCHED_DEADLINE and it will be
now enabled by default (along with MQ_IOSCHED_KYBER).
The IOSCHED_BFQ seems to replace IOSCHED_CFQ so select it in configs
previously choosing the latter.
CONFIG_CROSS_COMPILE is gone since commit f1089c92da ("kbuild: remove
CONFIG_CROSS_COMPILE support").
Link: https://lore.kernel.org/r/20200130195525.4525-2-krzk@kernel.org
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Olof Johansson <olof@lixom.net>
We keep this in a separate branch to avoid cross-branch conflicts, but
most of the material here is fairly boring -- some new drivers turned on
for hardware since they were merged, and some refreshed files due to
time having moved a lot of entries around.
-----BEGIN PGP SIGNATURE-----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=8F5r
-----END PGP SIGNATURE-----
Merge tag 'armsoc-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC defconfig updates from Olof Johansson:
"We keep this in a separate branch to avoid cross-branch conflicts, but
most of the material here is fairly boring -- some new drivers turned
on for hardware since they were merged, and some refreshed files due
to time having moved a lot of entries around"
* tag 'armsoc-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (38 commits)
ARM: configs: at91: enable MMC_SDHCI_OF_AT91 and MICROCHIP_PIT64B
arm64: defconfig: Enable Broadcom's GENET Ethernet controller
ARM: multi_v7_defconfig: Enable devfreq thermal integration
ARM: exynos_defconfig: Enable devfreq thermal integration
ARM: multi_v7_defconfig: Enable NFS v4.1 and v4.2
ARM: exynos_defconfig: Enable NFS v4.1 and v4.2
arm64: defconfig: Enable Actions Semi specific drivers
arm64: defconfig: Enable Broadcom's STB PCIe controller
arm64: defconfig: Enable CONFIG_CLK_IMX8MP by default
ARM: configs: at91: enable config flags for sam9x60 SoC
ARM: configs: at91: use savedefconfig
arm64: defconfig: Enable tegra XUDC support
ARM: defconfig: gemini: Update defconfig
arm64: defconfig: enable CONFIG_ARM_QCOM_CPUFREQ_NVMEM
arm64: defconfig: enable CONFIG_QCOM_CPR
arm64: defconfig: Enable HFPLL
arm64: defconfig: Enable CRYPTO_DEV_FSL_CAAM
ARM: imx_v6_v7_defconfig: Select the TFP410 driver
ARM: imx_v6_v7_defconfig: Enable NFS_V4_1 and NFS_V4_2 support
arm64: defconfig: Enable ATH10K_SNOC
...
This builds the BCM2711 thermal driver as module for the Raspberry Pi 4.
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Tested-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/1578941778-23321-5-git-send-email-stefan.wahren@i2se.com
1. Bring back explicitly wanted options which were removed through
`make savedefconfig`. savedefconfig removes options selected by
other symbol, however developers of this other symbol can remove
anytime 'select' statement.
2. Enable NFS v4.1 and v4.2, useful in testing/CI systems.
3. Enable thermal throttling through devfreq framework.
-----BEGIN PGP SIGNATURE-----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=d+tH
-----END PGP SIGNATURE-----
Merge tag 'samsung-defconfig-5.6' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into arm/defconfig
Samsung defconfig changes for v5.6
1. Bring back explicitly wanted options which were removed through
`make savedefconfig`. savedefconfig removes options selected by
other symbol, however developers of this other symbol can remove
anytime 'select' statement.
2. Enable NFS v4.1 and v4.2, useful in testing/CI systems.
3. Enable thermal throttling through devfreq framework.
* tag 'samsung-defconfig-5.6' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
ARM: multi_v7_defconfig: Enable devfreq thermal integration
ARM: exynos_defconfig: Enable devfreq thermal integration
ARM: multi_v7_defconfig: Enable NFS v4.1 and v4.2
ARM: exynos_defconfig: Enable NFS v4.1 and v4.2
ARM: exynos_defconfig: Bring back explicitly wanted options
Link: https://lore.kernel.org/r/20200120180227.9061-1-krzk@kernel.org
Signed-off-by: Olof Johansson <olof@lixom.net>
- Add pit64 and sdhci support for at91_dt
-----BEGIN PGP SIGNATURE-----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=wXIy
-----END PGP SIGNATURE-----
Merge tag 'at91-5.6-defconfig-2' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux into arm/defconfig
AT91 defconfig for 5.6 #2
- Add pit64 and sdhci support for at91_dt
* tag 'at91-5.6-defconfig-2' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux:
ARM: configs: at91: enable MMC_SDHCI_OF_AT91 and MICROCHIP_PIT64B
Link: https://lore.kernel.org/r/20200119235223.GA92283@piout.net
Signed-off-by: Olof Johansson <olof@lixom.net>
Panfrost driver provides a devfreq driver for the Mali GPU and allows to
scale GPU core frequency. Enable support for devfreq thermal integration
to enable cooling of GPU thermal zone by reducing GPU core frequency.
This fixes following warning during boot on Exynos5422-based Odroid XU4:
panfrost 11800000.gpu: [drm:panfrost_devfreq_init] Failed to register cooling device
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Panfrost driver provides a devfreq driver for the Mali GPU and allows to
scale GPU core frequency. Enable support for devfreq thermal integration
to enable cooling of GPU thermal zone by reducing GPU core frequency.
This fixes following warning during boot on Exynos5422-based Odroid XU4:
panfrost 11800000.gpu: [drm:panfrost_devfreq_init] Failed to register cooling device
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
NFS is widely used in debugging and Continuous Integration systems, so
enable the newest versions of protocol: v4.1 and v4.2.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
NFS is widely used in debugging and Continuous Integration systems, so
enable the newest versions of protocol: v4.1 and v4.2.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
- Enable i.MX8MP clock driver in arm64 defconfig.
- Enable Crypto CAAM driver support as module in arm64 defconfig.
- Enable ILI210X touch driver, USB CDC ACM function, NFS_V4 support and
TFP410 DVI bridge driver support in arm32 imx_v6_v7_defconfig.
-----BEGIN PGP SIGNATURE-----
iQFIBAABCgAyFiEEFmJXigPl4LoGSz08UFdYWoewfM4FAl4b4oUUHHNoYXduZ3Vv
QGtlcm5lbC5vcmcACgkQUFdYWoewfM7iqQgAm/j9aO61exErck4aI9+krqrLnF3w
eWgrrovPEwSARQo69bTAGK5GYjaZ4yGlDiH3Qk6TS5pvcRsEjaxsu/Ym/KVDtOBM
iiLD9MbI7w8Nd5pe4jBkCHF6ZOEWbMvzwc8zStM/RwTVvwajdkW/p1If4RQGEqmM
ZcMgXLcQneqWAbCsFDziAwsf6kfOhOghW3CNQ63GuGZc4UFRv8j056mBlG8PDeLL
4UbT+rI1xwwatNg9a2/E0HfA3Z4eJg1YbjMTrEx4NDkDel2Sz9GuVxJIY1+/lDKs
DCw4n1Fzfn4nxR8Eak7foQPY27VLgDqa6zM06QYhQXE3wWt2HumxJNQkmQ==
=H+6R
-----END PGP SIGNATURE-----
Merge tag 'imx-defconfig-5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/defconfig
i.MX defconfig update for 5.6:
- Enable i.MX8MP clock driver in arm64 defconfig.
- Enable Crypto CAAM driver support as module in arm64 defconfig.
- Enable ILI210X touch driver, USB CDC ACM function, NFS_V4 support and
TFP410 DVI bridge driver support in arm32 imx_v6_v7_defconfig.
* tag 'imx-defconfig-5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
arm64: defconfig: Enable CONFIG_CLK_IMX8MP by default
arm64: defconfig: Enable CRYPTO_DEV_FSL_CAAM
ARM: imx_v6_v7_defconfig: Select the TFP410 driver
ARM: imx_v6_v7_defconfig: Enable NFS_V4_1 and NFS_V4_2 support
ARM: configs: imx_v6_v7_defconfig: enable USB ACM
ARM: imx_v6_v7_defconfig: Enable TOUCHSCREEN_ILI210X
Link: https://lore.kernel.org/r/20200113034006.17430-6-shawnguo@kernel.org
Signed-off-by: Olof Johansson <olof@lixom.net>
This enables the driver for STM32 PWR regulators found on stm32mp1.
Link: https://lore.kernel.org/r/20200109125531.13610-1-alexandre.torgue@st.com
Signed-off-by: Amelie Delaunay <amelie.delaunay@st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
- Enable support for the display panel on the iwg20d board.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQ9qaHoIs/1I4cXmEiKwlD9ZEnxcAUCXhMDegAKCRCKwlD9ZEnx
cIIvAQCfEELGg/5vz7r3iemrUfIHxWq8YkfWsg5UnnMQ0f11QgD9HMfJSO4XebkY
JLsr3JV3XzkrIAGgssxpRwO2EV0BNAo=
=xQC4
-----END PGP SIGNATURE-----
Merge tag 'renesas-arm-defconfig-for-v5.6-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into arm/defconfig
Renesas ARM defconfig updates for v5.6
- Enable support for the display panel on the iwg20d board.
* tag 'renesas-arm-defconfig-for-v5.6-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel:
ARM: shmobile: defconfig: Enable support for panels from EDT
ARM: shmobile: defconfig: Restore debugfs support
Link: https://lore.kernel.org/r/20200106104857.8361-2-geert+renesas@glider.be
Signed-off-by: Olof Johansson <olof@lixom.net>
This updates the gemini defconfig with Kconfig shuffling and
some of the features activated in new upstream drivers and newly
supported devices:
- Move some symbols around due to Kconfig alterations,
this affects CONFIG_PREEMPT, CONFIG_PCI, CONFIG_CMA,
CONFIG_BINFMT_MISC, CONFIG_PARTITION_ADVANCED.
- Add RedBoot partition parsing, as all the Gemini
devices use some RedBoot derivative and store their
flash partition tables in this format.
- Enable bridge and VLAN filtering: a majority of the
Gemini devices have some kind of DSA chip for ethernet
bridging/routing.
- Enable CONFIG_NET_DSA_REALTEK_SMI as this DSA router
chip is found in the Gemini-based products. This makes
explicit selection of CONFIG_REALTEK_PHY unnecessary
so that goes away.
- Enable CONFIG_TUN since Gemini userspace often make
use of the TUN interface for network services.
- Enable MARVELL_PHY as Marvell PHY connectors are often
found in Gemini systems.
- Enable basic 802.11 libraries as many Gemini systems
have wireless PCI cards.
Link: https://lore.kernel.org/r/20200101143520.14218-1-linus.walleij@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Olof Johansson <olof@lixom.net>
Some boards like imx51-babbage, imx53-cx9020 and imx6q-utilite-pro
have a TFP410 DVI bridge chip.
Select its driver by default.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Enable NFS_V4_1 and NFS_V4_2 to support NFS servers providing that
protocol.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
This activates the device tree-based cpufreq driver that
Ux500 is using and enables the schedutil and ondemand
governors with schedutil as default. This works fine in
the setups I have tested.
Link: https://lore.kernel.org/r/20191217202648.23206-1-linus.walleij@linaro.org
Cc: Stephan Gerhold <stephan@gerhold.net>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Olof Johansson <olof@lixom.net>
1. Restore debugfs support in exynos_defconfig (as now it is not
selected as dependency of tracing). Debugfs is required by systemd
and several tests.
2. Maintainers updates.
-----BEGIN PGP SIGNATURE-----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=xoio
-----END PGP SIGNATURE-----
Merge tag 'samsung-fixes-5.5' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into arm/fixes
Samsung fixes for v5.5
1. Restore debugfs support in exynos_defconfig (as now it is not
selected as dependency of tracing). Debugfs is required by systemd
and several tests.
2. Maintainers updates.
* tag 'samsung-fixes-5.5' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
ARM: exynos_defconfig: Restore debugfs support
MAINTAINERS: Include Samsung SoC serial driver in Samsung SoC entry
MAINTAINERS: Update Lukasz Luba's email address
Link: https://lore.kernel.org/r/20191215121316.32091-1-krzk@kernel.org
Signed-off-by: Olof Johansson <olof@lixom.net>
- Restore debugfs support
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQ9qaHoIs/1I4cXmEiKwlD9ZEnxcAUCXfObQQAKCRCKwlD9ZEnx
cGLCAP9uIY5rCoFPD6KdQMfM/Gk5Q9Li4UHlJrjVWe927W3dMAEA66yIbVCjWFUo
h8aqYuTK5ZUOzrlGESFuSDlWBqWhjww=
=bN4i
-----END PGP SIGNATURE-----
Merge tag 'renesas-fixes-for-v5.5-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into arm/fixes
Renesas fixes for v5.5
- Restore debugfs support
* tag 'renesas-fixes-for-v5.5-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel:
ARM: shmobile: defconfig: Restore debugfs support
Link: https://lore.kernel.org/r/20191213213719.18122-1-geert+renesas@glider.be
Signed-off-by: Olof Johansson <olof@lixom.net>
This series of changes contains fixes for issues recently noticed:
- The ti-sysc interconnect target module driver needs fixes for
mstandby quirk handling and reset delay
- We need to configure am335x-sancloud-bbe to use rgmii-id mode because of
the phy changes done earlier
- NET_SWITCHDEV is no longer selected in Kconfig but a dependency and we
must enable CONFIG_NET_SWITCHDEV to have TI_CPSW_SWITCHDEV
- We are still relying on DEBUG_FS at least for PM configuration, let's
add it back
- We need to update compatible for am437x-gp/epos-evm because of the
recent changes to use generic panels
-----BEGIN PGP SIGNATURE-----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=3muQ
-----END PGP SIGNATURE-----
Merge tag 'omap-for-v5.5/fixes-rc1-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/fixes
Fixes for omap variants for v5.5-rc1 cycle
This series of changes contains fixes for issues recently noticed:
- The ti-sysc interconnect target module driver needs fixes for
mstandby quirk handling and reset delay
- We need to configure am335x-sancloud-bbe to use rgmii-id mode because of
the phy changes done earlier
- NET_SWITCHDEV is no longer selected in Kconfig but a dependency and we
must enable CONFIG_NET_SWITCHDEV to have TI_CPSW_SWITCHDEV
- We are still relying on DEBUG_FS at least for PM configuration, let's
add it back
- We need to update compatible for am437x-gp/epos-evm because of the
recent changes to use generic panels
* tag 'omap-for-v5.5/fixes-rc1-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
bus: ti-sysc: Fix missing reset delay handling
ARM: dts: am437x-gp/epos-evm: fix panel compatible
ARM: omap2plus_defconfig: Add back DEBUG_FS
ARM: omap2plus_defconfig: enable NET_SWITCHDEV
ARM: dts: am335x-sancloud-bbe: fix phy mode
bus: ti-sysc: Fix missing force mstandby quirk handling
Link: https://lore.kernel.org/r/pull-1576254925-709310@atomide.com
Signed-off-by: Olof Johansson <olof@lixom.net>
The iwg20d comes with an LCD panel from Emerging Display
Technologies Corporation (EDT), therefore enable what's
required to support it.
Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://lore.kernel.org/r/1573660292-10629-12-git-send-email-fabrizio.castro@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Since commit 0e4a459f56 ("tracing: Remove unnecessary DEBUG_FS
dependency"), CONFIG_DEBUG_FS is no longer auto-enabled. This breaks
booting Debian 9, as systemd needs debugfs:
[FAILED] Failed to mount /sys/kernel/debug.
See 'systemctl status sys-kernel-debug.mount' for details.
[DEPEND] Dependency failed for Local File Systems.
...
You are in emergGive root password for maintenance
(or press Control-D to continue):
Fix this by enabling CONFIG_DEBUG_FS explicitly.
See also commit 18977008f4 ("ARM: multi_v7_defconfig: Restore
debugfs support").
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Link: https://lore.kernel.org/r/20191209101327.26571-1-geert+renesas@glider.be
This is currently off and that's not desirable: default imx config is
meant to be generally useful for development and debugging.
Running git bisect between v5.4 and v5.5-rc1 finds this started from
commit 0e4a459f56 ("tracing: Remove unnecessary DEBUG_FS dependency")
Explicit CONFIG_DEBUG_FS=y was earlier removed by
commit c29d541f59 ("ARM: imx_v6_v7_defconfig: Remove unneeded options")
A very similar fix was required before:
commit 7e9eb62688 ("ARM: imx_v6_v7_defconfig: Explicitly restore CONFIG_DEBUG_FS")
Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Few options KALLSYMS_ALL, SCSI, PM_DEVFREQ and mutex/spinlock debugging
were removed with savedefconfig because they were selected by other
options. However these are user-visible options and they might not be
selected in the future. Exactly this happened with commit 0e4a459f56
("tracing: Remove unnecessary DEBUG_FS dependency") removing the
dependency between DEBUG_FS and TRACING.
To avoid losing these options in the future, explicitly mention them in
defconfig.
Reported-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
It is used for USB CDC ACM function.
Reviewed-by: Leonard Crestez <leonard.crestez@nxp.com>
Signed-off-by: Peter Chen <peter.chen@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Add the Analogix anx78xx driver so that the external display over HDMI
can be used on Nexus 5 phones.
Reviewed-by: Georgi Djakov <georgi.djakov@linaro.org>
Signed-off-by: Brian Masney <masneyb@onstation.org>
Link: https://lore.kernel.org/r/20191024103140.10077-3-masneyb@onstation.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Add interconnect support for msm8974-based SoCs in order to support the
GPU on this platform.
Reviewed-by: Georgi Djakov <georgi.djakov@linaro.org>
Signed-off-by: Brian Masney <masneyb@onstation.org>
Link: https://lore.kernel.org/r/20191024103140.10077-2-masneyb@onstation.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Commit 0e4a459f56 ("tracing: Remove unnecessary DEBUG_FS dependency")
removed select for DEBUG_FS but we still need it at least for enabling
deeper idle states for the SoCs.
Signed-off-by: Tony Lindgren <tony@atomide.com>
The TI_CPSW_SWITCHDEV definition in Kconfig was changed from "select
NET_SWITCHDEV" to "depends on NET_SWITCHDEV", and therefore it is required
to explicitelly enable NET_SWITCHDEV config option in omap2plus_defconfig.
Fixes: 3727d259dd ("arm: omap2plus_defconfig: enable new cpsw switchdev driver")
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Commit 9f532d26c7 ("ARM: exynos_defconfig: Trim and reorganize with
savedefconfig") removed explicit enable line for CONFIG_DEBUG_FS, because
that feature has been selected by other enabled options: CONFIG_TRACING,
which in turn had been selected by CONFIG_PERF_EVENTS and
CONFIG_PROVE_LOCKING.
In meantime, commit 0e4a459f56 ("tracing: Remove unnecessary DEBUG_FS
dependency") removed the dependency between CONFIG_DEBUG_FS and
CONFIG_TRACING, so CONFIG_DEBUG_FS is no longer enabled in default builds.
Enable it again explicitly, as debugfs support is essential for various
automated testing tools.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
The imx6q-logicpd board supports an LCD with an ili2117
touchscreen controller.
This patch enables the TOUCHSCREEN_ILI210X which will support
the ili2117.
Signed-off-by: Adam Ford <aford173@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Commit fd7d58f0db ("ARM: multi_v7_defconfig: renormalize based on recent
additions") removed explicit enable line for CONFIG_DEBUG_FS, because
that feature has been selected by other enabled options: CONFIG_TRACING,
which were enabled by CONFIG_PERF_EVENTS.
In meantime, commit 0e4a459f56 ("tracing: Remove unnecessary DEBUG_FS
dependency") removed the dependency between CONFIG_DEBUG_FS and
CONFIG_TRACING, so CONFIG_DEBUG_FS is no longer enabled in default builds.
Enable it again explicitly, as debugfs support is essential for various
automated testing tools.
Link: https://lore.kernel.org/r/20191206125112.11006-1-m.szyprowski@samsung.com
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
This is mostly to reorder the entries as they've moved in the Kconfig
hierarchies. Doing this periodically (but not very often) simplifies
conflict resolution for new options, etc.
Link: https://lore.kernel.org/r/20191205211438.27552-2-olof@lixom.net
Signed-off-by: Olof Johansson <olof@lixom.net>
We keep this in a separate branch to avoid cross-branch conflicts, but
most of the material here is fairly boring -- some new drivers turned on
for hardware since they were merged, and some refreshed files due to
time having moved a lot of entries around.
-----BEGIN PGP SIGNATURE-----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=rTWJ
-----END PGP SIGNATURE-----
Merge tag 'armsoc-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC defconfig updates from Olof Johansson:
"We keep this in a separate branch to avoid cross-branch conflicts, but
most of the material here is fairly boring -- some new drivers turned
on for hardware since they were merged, and some refreshed files due
to time having moved a lot of entries around"
* tag 'armsoc-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (36 commits)
ARM: config: multi_v5: ASPEED SDHCI, SGPIO
ARM: configs: multi_v7: ASPEED network, gpio, FSI
ARM: config: aspeed-g4: Add MMC, and cleanup
ARM: config: aspeed-g5: Add SGPIO and FSI drivers
ARM: config: aspeed-g5: Enable 8250_DW quirks
arm64: defconfig: Change CONFIG_AT803X_PHY from m to y
ARM: shmobile: defconfig: Refresh for v5.4-rc1
arm64: defconfig: Enable R8A77961 SoC
ARM: configs: sunxi: Enable MICREL_PHY
arm64: defconfig: add new Allwinner crypto options
ARM: configs: sunxi: add new Allwinner crypto options
ARM: tegra: Enable Tegra VDE driver in tegra_defconfig
ARM: imx_v6_v7_defconfig: Enable CONFIG_TOUCHSCREEN_DA9052
arm64: defconfig: Enable configs for S32V234
arm64: defconfig: Enable CONFIG_KEYBOARD_IMX_SC_KEY as module
arm64: defconfig: Enable SMMU v3 PMCG
arm64: defconfig: Enable HiSilicon ZIP controller
arm64: defconfig: enable Altera GPIO controller
ARM: multi_v7_defconfig: Enable audio support for stm32mp157
arm64: defconfig: enable rsu driver
...
Pull sysctl system call removal from Eric Biederman:
"As far as I can tell we have reached the point where no one enables
the sysctl system call anymore. It still is enabled in a few
defconfigs but they are mostly the rarely used one and in asking
people about that it was more cut & paste enabled than anything else.
This is single commit that just deletes code. Leaving just enough code
so that the deprecated sysctl warning continues to be printed. If my
analysis turns out to be wrong and someone actually cares it will be
easy to revert this commit and have the system call again.
There was one new xtensa defconfig in linux-next that enabled the
system call this cycle and when asked about it the maintainer of the
code replied that it was not enabled on purpose. As of today's
linux-next tree that defconfig no longer enables the system call.
What we saw in the review discussion was that if we go a step farther
than my patch and mess with uapi headers there are pieces of code that
won't compile, but nothing minds the system call actually disappearing
from the kernel"
Link: https://lore.kernel.org/lkml/201910011140.EA0181F13@keescook/
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace:
sysctl: Remove the sysctl system call
This system call has been deprecated almost since it was introduced, and
in a survey of the linux distributions I can no longer find any of them
that enable CONFIG_SYSCTL_SYSCALL. The only indication that I can find
that anyone might care is that a few of the defconfigs in the kernel
enable CONFIG_SYSCTL_SYSCALL. However this appears in only 31 of 414
defconfigs in the kernel, so I suspect this symbols presence is simply
because it is harmless to include rather than because it is necessary.
As there appear to be no users of the sysctl system call, remove the
code. As this removes one of the few uses of the internal kernel mount
of proc I hope this allows for even more simplifications of the proc
filesystem.
Cc: Alex Smith <alex.smith@imgtec.com>
Cc: Anders Berg <anders.berg@lsi.com>
Cc: Apelete Seketeli <apelete@seketeli.net>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Chee Nouk Phoon <cnphoon@altera.com>
Cc: Chris Zankel <chris@zankel.net>
Cc: Christian Ruppert <christian.ruppert@abilis.com>
Cc: Greg Ungerer <gerg@uclinux.org>
Cc: Harvey Hunt <harvey.hunt@imgtec.com>
Cc: Helge Deller <deller@gmx.de>
Cc: Hongliang Tao <taohl@lemote.com>
Cc: Hua Yan <yanh@lemote.com>
Cc: Huacai Chen <chenhc@lemote.com>
Cc: John Crispin <blogic@openwrt.org>
Cc: Jonas Jensen <jonas.jensen@gmail.com>
Cc: Josh Boyer <jwboyer@gmail.com>
Cc: Jun Nie <jun.nie@linaro.org>
Cc: Kevin Hilman <khilman@linaro.org>
Cc: Kevin Wells <kevin.wells@nxp.com>
Cc: Kumar Gala <galak@codeaurora.org>
Cc: Lars-Peter Clausen <lars@metafoo.de>
Cc: Ley Foon Tan <lftan@altera.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Markos Chandras <markos.chandras@imgtec.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Noam Camus <noamc@ezchip.com>
Cc: Olof Johansson <olof@lixom.net>
Cc: Paul Burton <paul.burton@mips.com>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: Phil Edworthy <phil.edworthy@renesas.com>
Cc: Pierrick Hascoet <pierrick.hascoet@abilis.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Roland Stigge <stigge@antcom.de>
Cc: Santosh Shilimkar <santosh.shilimkar@ti.com>
Cc: Scott Telford <stelford@cadence.com>
Cc: Stephen Boyd <sboyd@codeaurora.org>
Cc: Steven J. Hill <Steven.Hill@imgtec.com>
Cc: Tanmay Inamdar <tinamdar@apm.com>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Wolfram Sang <w.sang@pengutronix.de>
Acked-by: Andi Kleen <ak@linux.intel.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Add CONFIG_TI_CPSW_SWITCHDEV option to enable new cpsw switchdev driver
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This adds recently merged drivers to the aspeed g4 and g5 defconfigs,
and to the multi v5 and v7 shared defconfigs.
-----BEGIN PGP SIGNATURE-----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=/4iy
-----END PGP SIGNATURE-----
Merge tag 'aspeed-5.5-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/aspeed into arm/defconfig
ASPEED device tree updates for 5.5
This adds recently merged drivers to the aspeed g4 and g5 defconfigs,
and to the multi v5 and v7 shared defconfigs.
* tag 'aspeed-5.5-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/aspeed:
ARM: config: multi_v5: ASPEED SDHCI, SGPIO
ARM: configs: multi_v7: ASPEED network, gpio, FSI
ARM: config: aspeed-g4: Add MMC, and cleanup
ARM: config: aspeed-g5: Add SGPIO and FSI drivers
ARM: config: aspeed-g5: Enable 8250_DW quirks
Link: https://lore.kernel.org/r/CACPK8Xc3a=6irkTSfwyPrr=nWv_fa9nMxthtC2AyqFJEWvuMwg@mail.gmail.com
Signed-off-by: Olof Johansson <olof@lixom.net>
Enable drivers used by the ASPEED AST2400 SoC so the multi v5 defconfig
can run on those boards.
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Enable drivers used by the ASPEED SoCs so the multi v7 defconfig can run
on those boards.
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Joel Stanley <joel@jms.id.au>
The PCA muxes now depend on I2C_MUX. SPI si now required by SPI-NOR.
Add the eMMC driver, and remove the FSI SBEFIFO which is not used on AST2400
systems.
The remaining changes are cleanups from regenerating the defconfig.
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Joel Stanley <joel@jms.id.au>
These are recently merged drivers for ASPEED systems.
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Joel Stanley <joel@jms.id.au>
This driver option is used by the AST2600 A0 boards to work around a
hardware issue.
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Joel Stanley <joel@jms.id.au>
- Unselect PIT now that the TCBs can be used at boot time
-----BEGIN PGP SIGNATURE-----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=IDSp
-----END PGP SIGNATURE-----
Merge tag 'at91-5.5-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux into arm/defconfig
AT91 defconfig for 5.5
- Unselect PIT now that the TCBs can be used at boot time
* tag 'at91-5.5-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux:
ARM: configs: at91: unselect PIT
Link: https://lore.kernel.org/r/20191107222445.GA202433@piout.net
Signed-off-by: Olof Johansson <olof@lixom.net>
* Enable OCMEM support
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=2pjn
-----END PGP SIGNATURE-----
Merge tag 'qcom-defconfig-for-5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/defconfig
Qualcomm ARM Based defconfig Updates for v5.5
* Enable OCMEM support
* tag 'qcom-defconfig-for-5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
ARM: qcom_defconfig: add ocmem support
Link: https://lore.kernel.org/r/1573068840-13098-3-git-send-email-agross@kernel.org
Signed-off-by: Olof Johansson <olof@lixom.net>
- Enable i.MX7ULP watchdog, DA9052 touch and USB configfs support
in imx_v6_v7_defconfig.
- Enable newly added S32V234 SoC and its UART driver support in arm64
defconfig.
- Built i.MX8QXP SCU key driver as module in arm64 defconfig.
- Change AT803X Ethernet PHY driver from module to built-in, so that
we can boot i.MX8MM EVK board with rootfs on NFS.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJdwYuhAAoJEFBXWFqHsHzO+tcH/RmEkt5uueRqM++I56F7Kmc9
80I2pMUbCXln2rjWXEP29OE1h4pKtimfwtEoQvtRX8DOhCFT+CCxsj9JqMZAEnxp
WrCC6GbNAYG+Geje6HAVy7mr2mFD4KXwcc/TLjV2fk3MpuEcsYLuEL/t+wqnKw/W
IabyG0v/CZfp1fkX5FIkpmI770WzOs5kzfIGTnJ9GEJtj/omZYPXK605GSDSWovJ
XX2iI2wFmLy8/KO9enhGQjSzZQyOZce/cyqCG4YGdWSHQzJE9zBP207EHZqEB21b
g+5VzYbM75WmAt0TL+2K3ZzuOKVKZeDpY6KQTz02rTfIRZ4sieY6l9+i/ECtAgY=
=w4CK
-----END PGP SIGNATURE-----
Merge tag 'imx-defconfig-5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/defconfig
i.MX defconfig update for 5.5:
- Enable i.MX7ULP watchdog, DA9052 touch and USB configfs support
in imx_v6_v7_defconfig.
- Enable newly added S32V234 SoC and its UART driver support in arm64
defconfig.
- Built i.MX8QXP SCU key driver as module in arm64 defconfig.
- Change AT803X Ethernet PHY driver from module to built-in, so that
we can boot i.MX8MM EVK board with rootfs on NFS.
* tag 'imx-defconfig-5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
arm64: defconfig: Change CONFIG_AT803X_PHY from m to y
ARM: imx_v6_v7_defconfig: Enable CONFIG_TOUCHSCREEN_DA9052
arm64: defconfig: Enable configs for S32V234
arm64: defconfig: Enable CONFIG_KEYBOARD_IMX_SC_KEY as module
ARM: imx_v6_v7_defconfig: Build USB_CONFIGFS into kernel
ARM: imx_v6_v7_defconfig: Enable CONFIG_IMX7ULP_WDT by default
Link: https://lore.kernel.org/r/20191105150315.15477-7-shawnguo@kernel.org
Signed-off-by: Olof Johansson <olof@lixom.net>
Enables the Tegra VDE driver by default. This is currently in staging
but can be used with existing userspace to do hardware-accelerated video
decoding of H.264 streams.
-----BEGIN PGP SIGNATURE-----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=ziJD
-----END PGP SIGNATURE-----
Merge tag 'tegra-for-5.5-arm-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/defconfig
ARM: tegra: Default configuration changes for v5.5-rc1
Enables the Tegra VDE driver by default. This is currently in staging
but can be used with existing userspace to do hardware-accelerated video
decoding of H.264 streams.
* tag 'tegra-for-5.5-arm-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
ARM: tegra: Enable Tegra VDE driver in tegra_defconfig
Link: https://lore.kernel.org/r/20191102144521.3863321-7-thierry.reding@gmail.com
Signed-off-by: Olof Johansson <olof@lixom.net>
multiple boards, one for the new crypto driver.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQRcEzekXsqa64kGDp7j7w1vZxhRxQUCXb2ovAAKCRDj7w1vZxhR
xfeOAP9peTfpsETYjozV4ZmKKzoMS/+KtKtPw16i+W+cgMezDQEA3e7JtpL1oC/P
qYgJVeOB2m6dHXuZj3xZEabglbP5pA4=
=MhwW
-----END PGP SIGNATURE-----
Merge tag 'sunxi-config-for-5.5-2' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into arm/defconfig
Two new drivers enabled in sunxi_defconfig: one for the PHY found on
multiple boards, one for the new crypto driver.
* tag 'sunxi-config-for-5.5-2' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
ARM: configs: sunxi: Enable MICREL_PHY
ARM: configs: sunxi: add new Allwinner crypto options
Link: https://lore.kernel.org/r/27125172-7ce8-427e-83f9-8e9bd69d50a4.lettre@localhost
Signed-off-by: Olof Johansson <olof@lixom.net>
- Refresh shmobile_defconfig for v5.4-rc1.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQ9qaHoIs/1I4cXmEiKwlD9ZEnxcAUCXbxCFgAKCRCKwlD9ZEnx
cJ0/AQCLLQVNK2ZIO0uOJV1KuFNVBbLbOorFi8YRkRY2GPIkiwEAiwSARu7Daz//
M24hs05l3DkfDwhKBj9z1I2EM/DVyAk=
=hEYM
-----END PGP SIGNATURE-----
Merge tag 'renesas-arm-defconfig-for-v5.5-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into arm/defconfig
Renesas ARM defconfig updates for v5.5
- Refresh shmobile_defconfig for v5.4-rc1.
* tag 'renesas-arm-defconfig-for-v5.5-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel:
ARM: shmobile: defconfig: Refresh for v5.4-rc1
Link: https://lore.kernel.org/r/20191101155842.31467-2-geert+renesas@glider.be
Signed-off-by: Olof Johansson <olof@lixom.net>
Update the defconfig for Renesas ARM boards:
- Drop CONFIG_ARM_ERRATA_754322=y (auto-enabled since commit
2eced4607a ("soc: renesas: Enable ARM_ERRATA_754322 for
affected Cortex-A9")),
- Drop CONFIG_MTD_M25P80=y (removed in commit b35b9a1036 ("mtd:
spi-nor: Move m25p80 code in spi-nor.c")),
- Drop CONFIG_LCD_CLASS_DEVICE=n (no longer auto-enabled since commit
bcd69da98e ("video: backlight: Drop default m for
{LCD,BACKLIGHT_CLASS_DEVICE}")).
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20191025135325.32242-1-geert+renesas@glider.be
Include support for Micrel KSZ9031 PHY driver in sunxi_defconfig,
which fixes issues of link not coming up at boot time with
certain link partners.
Micrel KSZ9031 PHY chip is used on Olimex A20-OLinuXino-LIME2
boards.
The errata fix itself has been implemented in commit
"3aed3e2a143c96: net: phy: micrel: add Asym Pause workaround"
Signed-off-by: Priit Laes <plaes@plaes.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
This patch adds the new Allwinner crypto configs to sunxi_defconfig
Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
The video decoder driver was tested by time and works absolutely fine.
The reason why it is in staging is because it doesn't provide common V4L
interface yet, this shouldn't stop driver enabling in the defconfig since
our userspace (libvdpau-tegra) provides combined acceleration of decoding
and displaying without use of V4L.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Enable the CONFIG_TOUCHSCREEN_DA9052 option, so that touchscreen
can be functional by default on imx53-qsb.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
A slightly larger set of fixes have accrued in the last two weeks.
Mostly a collection of the usual smaller fixes:
- Marvell Armada: USB phy setup issues on Turris Mox
- Broadcom: GPIO/pinmux DT mapping corrections for Stingray, MMC bus
width fix for RPi Zero W, GPIO LED removal for RPI CM3. Also some
maintainer updates.
- OMAP: Fixlets for display config, interrupt settings for wifi, some
clock/PM pieces. Also IOMMU regression fix and a ti-sysc no-watchdog
regression fix.
- i.MX: A few fixes around PM/settings, some devicetree fixlets and
catching up with config option changes in DRM
- Rockchip: RockRro64 misc DT fixups, Hugsun X99 USB-C, Kevin display
panel settings
... and some smaller fixes for Davinci (backlight, McBSP DMA), Allwinner
(phy regulators, PMU removal on A64, etc).
-----BEGIN PGP SIGNATURE-----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=Jy/6
-----END PGP SIGNATURE-----
Merge tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC fixes from Olof Johansson:
"A slightly larger set of fixes have accrued in the last two weeks.
Mostly a collection of the usual smaller fixes:
- Marvell Armada: USB phy setup issues on Turris Mox
- Broadcom: GPIO/pinmux DT mapping corrections for Stingray, MMC bus
width fix for RPi Zero W, GPIO LED removal for RPI CM3. Also some
maintainer updates.
- OMAP: Fixlets for display config, interrupt settings for wifi, some
clock/PM pieces. Also IOMMU regression fix and a ti-sysc
no-watchdog regression fix.
- i.MX: A few fixes around PM/settings, some devicetree fixlets and
catching up with config option changes in DRM
- Rockchip: RockRro64 misc DT fixups, Hugsun X99 USB-C, Kevin display
panel settings
... and some smaller fixes for Davinci (backlight, McBSP DMA),
Allwinner (phy regulators, PMU removal on A64, etc)"
* tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (42 commits)
ARM: dts: stm32: relax qspi pins slew-rate for stm32mp157
MAINTAINERS: Update the Spreadtrum SoC maintainer
MAINTAINERS: Remove Gregory and Brian for ARCH_BRCMSTB
ARM: dts: bcm2837-rpi-cm3: Avoid leds-gpio probing issue
bus: ti-sysc: Fix watchdog quirk handling
ARM: OMAP2+: Add pdata for OMAP3 ISP IOMMU
ARM: OMAP2+: Plug in device_enable/idle ops for IOMMUs
ARM: davinci_all_defconfig: enable GPIO backlight
ARM: davinci: dm365: Fix McBSP dma_slave_map entry
ARM: dts: bcm2835-rpi-zero-w: Fix bus-width of sdhci
ARM: imx_v6_v7_defconfig: Enable CONFIG_DRM_MSM
arm64: dts: imx8mn: Use correct clock for usdhc's ipg clk
arm64: dts: imx8mm: Use correct clock for usdhc's ipg clk
arm64: dts: imx8mq: Use correct clock for usdhc's ipg clk
ARM: dts: imx7s: Correct GPT's ipg clock source
ARM: dts: vf610-zii-scu4-aib: Specify 'i2c-mux-idle-disconnect'
ARM: dts: imx6q-logicpd: Re-Enable SNVS power key
arm64: dts: lx2160a: Correct CPU core idle state name
mailmap: Add Simon Arlott (replacement for expired email address)
arm64: dts: rockchip: Fix override mode for rk3399-kevin panel
...
This commits enable (as module):
- STM32 SAI and I2S configs used on stm32mp157.
- Cirrus CS42L51 audio codec for stm32mp157a-dk1 board.
- Audio graph card support for stm32mp157a-dk1 board.
Link: https://lore.kernel.org/r/20191025125632.11057-1-alexandre.torgue@st.com
Signed-off-by: Olivier Moysan <olivier.moysan@st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
A series of changes from Adam Ford to update for removed and moved items,
and then enable crypto devices and MT9P031 video as loadable modules.
Looks like I missed unifying the subject line for one commit, but I did
not want to mess with the commit after pushing it out.
-----BEGIN PGP SIGNATURE-----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=f4PV
-----END PGP SIGNATURE-----
Merge tag 'omap-for-v5.5/defconfig-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/defconfig
Defconfig changes for omap2plus_defconfig for v5.5
A series of changes from Adam Ford to update for removed and moved items,
and then enable crypto devices and MT9P031 video as loadable modules.
Looks like I missed unifying the subject line for one commit, but I did
not want to mess with the commit after pushing it out.
* tag 'omap-for-v5.5/defconfig-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
configs: omap2plus: Enable VIDEO_MT9P031 module
ARM: omap2plus_defconfig: Enable HW Crypto engine modules
ARM: omap2plus_defconfig: Update for moved item
ARM: omap2plus_defconfig: Update for removed items
Link: https://lore.kernel.org/r/pull-1571853258-16998@atomide.com
Signed-off-by: Olof Johansson <olof@lixom.net>
More fixes for omap variants:
- Update more panel options in omap2plus_defconfig that got changed
as we moved to use generic LCD panels
- Remove unused twl_keypad for logicpd-torpedo-som to avoid boot
time warnings. This is only a cosmetic fix, but at least dmesg output
is now getting more readable after all the fixes to remove pointless
warnings
- Fix gpu_cm node name as we still have a non-standard node name
dependency for clocks. This should eventually get fixed by use
of domain specific compatible property
- Fix use of i2c-mux-idle-disconnect for m3874-iceboard
- Use level interrupt for omap4 & 5 wlcore to avoid lost edge
interrupts
-----BEGIN PGP SIGNATURE-----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=n/vc
-----END PGP SIGNATURE-----
Merge tag 'omap-for-v5.4/fixes-rc3-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/fixes
Fixes for omaps for v5.4-rc cycle
More fixes for omap variants:
- Update more panel options in omap2plus_defconfig that got changed
as we moved to use generic LCD panels
- Remove unused twl_keypad for logicpd-torpedo-som to avoid boot
time warnings. This is only a cosmetic fix, but at least dmesg output
is now getting more readable after all the fixes to remove pointless
warnings
- Fix gpu_cm node name as we still have a non-standard node name
dependency for clocks. This should eventually get fixed by use
of domain specific compatible property
- Fix use of i2c-mux-idle-disconnect for m3874-iceboard
- Use level interrupt for omap4 & 5 wlcore to avoid lost edge
interrupts
* tag 'omap-for-v5.4/fixes-rc3-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: dts: Use level interrupt for omap4 & 5 wlcore
ARM: dts: am3874-iceboard: Fix 'i2c-mux-idle-disconnect' usage
ARM: dts: omap5: fix gpu_cm clock provider name
ARM: dts: logicpd-torpedo-som: Remove twl_keypad
ARM: omap2plus_defconfig: Fix selected panels after generic panel changes
Link: https://lore.kernel.org/r/pull-1571242890-118432@atomide.com
Signed-off-by: Olof Johansson <olof@lixom.net>
The Logic PD Torpedo Development Kit supports a Leopard Imaging
camera based on the Aptina MT9P031 sensor.
This patch enables this to be built as a module.
Signed-off-by: Adam Ford <aford173@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Marvell MMP/PXA/MMP2 platforms seem to be excluded from the defconfig
for no good reasons. Enable the DT-based boards along with modules for
their peripherals.
Link: https://lore.kernel.org/r/20191017145705.2867950-1-lkundrak@v3.sk
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Signed-off-by: Olof Johansson <olof@lixom.net>
======================
* fix GPIO backlight support on DA850 by enabling the needed config
in davinci_all_defconfig. This is a fix because the driver and board
support got converted to use BACKLIGHT_GPIO driver, but defconfig update
is still missing in v5.4.
* fix for McBSP DMA on DM365
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQIcBAABAgAGBQJdrcF+AAoJEGFBu2jqvgRNEssP/Ru98C/Q2mvnnoU4guY4gscK
fJWP6YTcwnpKGPSyZKPxrf23nD7A7vEZQioiDSaYrx3Brmq4dkJBX86zE5dwPlkw
G1Cm9uFVx1YxBV6ddWOoTGZJjKfFeaJl6lRu7zJl8pQyS5mlmo7vWbOaDBx3a8Bg
gHIUz4D27kVvp4Xjq6xkP39KCQjl4ASK0nACPHfyqV1GoHZ7PVPgEGTF3NmaJWCd
YYjJhFmzuxz9rL+GxjwLVM+prDpldiG3767sEQG9KO03BCbCrYt1udywYH+rbODq
jO9bKaQJ42ademVJvgK78NniOmC5maNusyJ2ILS+k30fwWzaLskIPZQp6FaaU4Cq
3J6a9UoIBJhpIbB2+qO+KFbSfm7HT6BUiTwLj7XzOTJcXd38huZrJyQLSNcBt77m
t1jn2SPfAPv6oAE27dDAgxufphM1GZ3uNlL9MvL+Ej5wZPsW/olEMzHcqcnRDw2B
zZkeGKKBcgg5YtPBCnMONnsQi4NOQ4FtxKVP/cI3p7lTgGHsjsQEeN66kELsH0fi
0lumiLp/FA9VLri87WvM+wkIMXK59KhKVF38UzW86bl470peSAPUooMEkUUgwkpQ
4u7msV6xIk3V2BXj52zll/19jxfncDhA4bUvjz6nj3jII47Un+pWMz+x0B5rfinM
KQ04hfUF3wfivEEc2VX/
=Swww
-----END PGP SIGNATURE-----
Merge tag 'davinci-fixes-for-v5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci into arm/fixes
DaVinci fixes for v5.4
======================
* fix GPIO backlight support on DA850 by enabling the needed config
in davinci_all_defconfig. This is a fix because the driver and board
support got converted to use BACKLIGHT_GPIO driver, but defconfig update
is still missing in v5.4.
* fix for McBSP DMA on DM365
* tag 'davinci-fixes-for-v5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci:
ARM: davinci_all_defconfig: enable GPIO backlight
ARM: davinci: dm365: Fix McBSP dma_slave_map entry
Link: https://lore.kernel.org/r/7f3393f9-59be-a2d4-c1e1-ba6e407681d1@ti.com
Signed-off-by: Olof Johansson <olof@lixom.net>
- Re-enable SNVS power key for imx6q-logicpd board which was accidentally
disabled by a SoC level change.
- Fix I2C switches on vf610-zii-scu4-aib board by specifying property
i2c-mux-idle-disconnect.
- A fix on imx-scu API that reads UID from firmware to avoid kernel NULL
pointer dump.
- A series from Anson to correct i.MX7 GPT and i.MX8 USDHC IPG clock.
- A fix on DRM_MSM Kconfig regression on i.MX5 by adding the option
explicitly into imx_v6_v7_defconfig.
- Fix ARM regulator states issue for zii-ultra board, which is impacting
stability of the board.
- A correction on CPU core idle state name for LayerScape LX2160A SoC.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJdqHcmAAoJEFBXWFqHsHzOIqAIAJXqhCpbQkP5orCfXdFQxlvb
KpBiK0VEatMwPYAEm19Ij7/raFv+lRGIDo9ZyD9YGyDDIvOvRrSyeqDJCJSTEkol
QwTYl0KSNp2I4D7a0urcO4xMvcJt2QD2k3oe1Pe5mMDn5jbiMHAguUqrH96j/7zv
/9BE4n8aL9YBk6RE86YX0WMoDSfxToVQO+RQJ+7Yg66M83/9oUY3XqGv3svvZMD2
jsYtuHw8ounthr1OJSqcjUPTPLOCoEF+cG9HSkNmMCcShKNZ2wXIzvjeuBOdblKZ
MXnImEse4p7+81rsarGZLfj10tsfam4OibsgFqDIkgsT/aOdsOvXpjfp4/aO46Y=
=DFFA
-----END PGP SIGNATURE-----
Merge tag 'imx-fixes-5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/fixes
i.MX fixes for 5.4:
- Re-enable SNVS power key for imx6q-logicpd board which was accidentally
disabled by a SoC level change.
- Fix I2C switches on vf610-zii-scu4-aib board by specifying property
i2c-mux-idle-disconnect.
- A fix on imx-scu API that reads UID from firmware to avoid kernel NULL
pointer dump.
- A series from Anson to correct i.MX7 GPT and i.MX8 USDHC IPG clock.
- A fix on DRM_MSM Kconfig regression on i.MX5 by adding the option
explicitly into imx_v6_v7_defconfig.
- Fix ARM regulator states issue for zii-ultra board, which is impacting
stability of the board.
- A correction on CPU core idle state name for LayerScape LX2160A SoC.
* tag 'imx-fixes-5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
ARM: imx_v6_v7_defconfig: Enable CONFIG_DRM_MSM
arm64: dts: imx8mn: Use correct clock for usdhc's ipg clk
arm64: dts: imx8mm: Use correct clock for usdhc's ipg clk
arm64: dts: imx8mq: Use correct clock for usdhc's ipg clk
ARM: dts: imx7s: Correct GPT's ipg clock source
ARM: dts: vf610-zii-scu4-aib: Specify 'i2c-mux-idle-disconnect'
ARM: dts: imx6q-logicpd: Re-Enable SNVS power key
arm64: dts: lx2160a: Correct CPU core idle state name
arm64: dts: zii-ultra: fix ARM regulator states
soc: imx: imx-scu: Getting UID from SCU should have response
Link: https://lore.kernel.org/r/20191017141851.GA22506@dragon
Signed-off-by: Olof Johansson <olof@lixom.net>
More fixes for omap variants:
- Update more panel options in omap2plus_defconfig that got changed
as we moved to use generic LCD panels
- Remove unused twl_keypad for logicpd-torpedo-som to avoid boot
time warnings. This is only a cosmetic fix, but at least dmesg output
is now getting more readable after all the fixes to remove pointless
warnings
- Fix gpu_cm node name as we still have a non-standard node name
dependency for clocks. This should eventually get fixed by use
of domain specific compatible property
- Fix use of i2c-mux-idle-disconnect for m3874-iceboard
- Use level interrupt for omap4 & 5 wlcore to avoid lost edge
interrupts
-----BEGIN PGP SIGNATURE-----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=n/vc
-----END PGP SIGNATURE-----
Merge tag 'omap-for-v5.4/fixes-rc3-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/fixes
Fixes for omaps for v5.4-rc cycle
More fixes for omap variants:
- Update more panel options in omap2plus_defconfig that got changed
as we moved to use generic LCD panels
- Remove unused twl_keypad for logicpd-torpedo-som to avoid boot
time warnings. This is only a cosmetic fix, but at least dmesg output
is now getting more readable after all the fixes to remove pointless
warnings
- Fix gpu_cm node name as we still have a non-standard node name
dependency for clocks. This should eventually get fixed by use
of domain specific compatible property
- Fix use of i2c-mux-idle-disconnect for m3874-iceboard
- Use level interrupt for omap4 & 5 wlcore to avoid lost edge
interrupts
* tag 'omap-for-v5.4/fixes-rc3-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: dts: Use level interrupt for omap4 & 5 wlcore
ARM: dts: am3874-iceboard: Fix 'i2c-mux-idle-disconnect' usage
ARM: dts: omap5: fix gpu_cm clock provider name
ARM: dts: logicpd-torpedo-som: Remove twl_keypad
ARM: omap2plus_defconfig: Fix selected panels after generic panel changes
Link: https://lore.kernel.org/r/pull-1571242890-118432@atomide.com
Signed-off-by: Olof Johansson <olof@lixom.net>
DA850 EVM has been converted to use GPIO backlight device
for display backlight GPIO control.
Enable the GPIO backlight module in davinci_all_defconfig
to keep backlight support working.
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
[nsekhar@ti.com: edits to commit message for context]
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
The PIT is not required anymore to successfully boot and may actually harm
in case preempt-rt is used because the PIT interrupt is shared.
Disable it so the TCB clocksource is used.
Link: https://lore.kernel.org/r/20191009194814.15034-1-alexandre.belloni@bootlin.com
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Acked-by: Alexander Dahl <ada@thorsis.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Since commit 2eba69071b ("drm/msm: Remove Kconfig default") the
CONFIG_DRM_MSM option is no longer selected by default on i.MX5.
Explicitly select CONFIG_DRM_MSM so that we can get GPU support
by default on i.MX51 and i.MX53.
Fixes: 2eba69071b ("drm/msm: Remove Kconfig default")
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Some imx chips (6sll, 6ulz, 7ulp) don't have ethernet support and only a
limited number of USB controllers. For such cases NXP suggests
configuring the USB controller as an ethernet gadget for network boot
testing.
Set USB_CONFIGFS to be built into the kernel so that we can configure
the ethernet gadget without needing modules.
Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>
Reviewed-by: Peter Chen <peter.chen@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
