Commit Graph

103 Commits

Author SHA1 Message Date
Yang Yang ed8f3f999e mm: workingset: update description of the source file
The calculation of workingset size is the core logic of handling refault,
it had been updated several times[1][2] after workingset.c was created[3].
But the description hadn't been updated accordingly, this mismatch may
confuse the readers.  So we update the description to make it consistent
to the code.

[1] commit 34e58cac6d ("mm: workingset: let cache workingset challenge anon")
[2] commit aae466b005 ("mm/swap: implement workingset detection for anonymous LRU")
[3] commit a528910e12 ("mm: thrash detection-based file cache sizing")

Link: https://lkml.kernel.org/r/202304131634494948454@zte.com.cn
Signed-off-by: Yang Yang <yang.yang29@zte.com.cn>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-04-18 16:30:11 -07:00
Yosry Ahmed 4009b2f188 workingset: memcg: sleep when flushing stats in workingset_refault()
In workingset_refault(), we call
mem_cgroup_flush_stats_atomic_ratelimited() to read accurate stats within
an RCU read section and with sleeping disallowed.  Move the call above the
RCU read section to make it non-atomic.

Flushing is an expensive operation that scales with the number of cpus and
the number of cgroups in the system, so avoid doing it atomically where
possible.

Since workingset_refault() is the only caller of
mem_cgroup_flush_stats_atomic_ratelimited(), just make it non-atomic, and
rename it to mem_cgroup_flush_stats_ratelimited().

Link: https://lkml.kernel.org/r/20230330191801.1967435-7-yosryahmed@google.com
Signed-off-by: Yosry Ahmed <yosryahmed@google.com>
Acked-by: Shakeel Butt <shakeelb@google.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Josef Bacik <josef@toxicpanda.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Michal Koutný <mkoutny@suse.com>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Tejun Heo <tj@kernel.org>
Cc: Vasily Averin <vasily.averin@linux.dev>
Cc: Zefan Li <lizefan.x@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-04-18 16:29:50 -07:00
Yosry Ahmed 9fad9aee1f memcg: sleep during flushing stats in safe contexts
Currently, all contexts that flush memcg stats do so with sleeping not
allowed.  Some of these contexts are perfectly safe to sleep in, such as
reading cgroup files from userspace or the background periodic flusher. 
Flushing is an expensive operation that scales with the number of cpus and
the number of cgroups in the system, so avoid doing it atomically where
possible.

Refactor the code to make mem_cgroup_flush_stats() non-atomic (aka
sleepable), and provide a separate atomic version.  The atomic version is
used in reclaim, refault, writeback, and in mem_cgroup_usage().  All other
code paths are left to use the non-atomic version.  This includes
callbacks for userspace reads and the periodic flusher.

Since refault is the only caller of mem_cgroup_flush_stats_ratelimited(),
change it to mem_cgroup_flush_stats_atomic_ratelimited().  Reclaim and
refault code paths are modified to do non-atomic flushing in separate
later patches -- so it will eventually be changed back to
mem_cgroup_flush_stats_ratelimited().

Link: https://lkml.kernel.org/r/20230330191801.1967435-6-yosryahmed@google.com
Signed-off-by: Yosry Ahmed <yosryahmed@google.com>
Acked-by: Shakeel Butt <shakeelb@google.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Josef Bacik <josef@toxicpanda.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Michal Koutný <mkoutny@suse.com>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Tejun Heo <tj@kernel.org>
Cc: Vasily Averin <vasily.averin@linux.dev>
Cc: Zefan Li <lizefan.x@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-04-18 16:29:50 -07:00
Yosry Ahmed 92fbbc7202 memcg: rename mem_cgroup_flush_stats_"delayed" to "ratelimited"
mem_cgroup_flush_stats_delayed() suggests his is using a delayed_work, but
this is actually sometimes flushing directly from the callsite.

What it's doing is ratelimited calls.  A better name would be
mem_cgroup_flush_stats_ratelimited().

Link: https://lkml.kernel.org/r/20230330191801.1967435-3-yosryahmed@google.com
Signed-off-by: Yosry Ahmed <yosryahmed@google.com>
Suggested-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Shakeel Butt <shakeelb@google.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Josef Bacik <josef@toxicpanda.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Michal Koutný <mkoutny@suse.com>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Tejun Heo <tj@kernel.org>
Cc: Vasily Averin <vasily.averin@linux.dev>
Cc: Zefan Li <lizefan.x@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-04-18 16:29:49 -07:00
Yang Yang 5649d113ff swap_state: update shadow_nodes for anonymous page
Shadow_nodes is for shadow nodes reclaiming of workingset handling, it is
updated when page cache add or delete since long time ago workingset only
supported page cache.  But when workingset supports anonymous page
detection, we missied updating shadow nodes for it.  This caused that
shadow nodes of anonymous page will never be reclaimd by
scan_shadow_nodes() even they use much memory and system memory is tense.

So update shadow_nodes of anonymous page when swap cache is add or delete
by calling xas_set_update(..workingset_update_node).

Link: https://lkml.kernel.org/r/202301182013032211005@zte.com.cn
Fixes: aae466b005 ("mm/swap: implement workingset detection for anonymous LRU")
Signed-off-by: Yang Yang <yang.yang29@zte.com.cn>
Reviewed-by: Ran Xiaokai <ran.xiaokai@zte.com.cn>
Cc: Bagas Sanjaya <bagasdotme@gmail.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-02-02 22:33:24 -08:00
Johannes Weiner f78dfc7b77 workingset: fix confusion around eviction vs refault container
Refault decisions are made based on the lruvec where the page was evicted,
as that determined its LRU order while it was alive.  Stats and workingset
aging must then occur on the lruvec of the new page, as that's the node
and cgroup that experience the refault and that's the lruvec whose
nonresident info ages out by a new resident page.  Those lruvecs could be
different when a page is shared between cgroups, or the refaulting page is
allocated on a different node.

There are currently two mix-ups:

1. When swap is available, the resident anon set must be considered
   when comparing the refault distance. The comparison is made against
   the right anon set, but the check for swap is not. When pages get
   evicted from a cgroup with swap, and refault in one without, this
   can incorrectly consider a hot refault as cold - and vice
   versa. Fix that by using the eviction cgroup for the swap check.

2. The stats and workingset age are updated against the wrong lruvec
   altogether: the right cgroup but the wrong NUMA node. When a page
   refaults on a different NUMA node, this will have confusing stats
   and distort the workingset age on a different lruvec - again
   possibly resulting in hot/cold misclassifications down the line.

Fix the swap check and the refault pgdat to address both concerns.

This was found during code review.  It hasn't caused notable issues in
production, suggesting that those refault-migrations are relatively rare
in practice.

Link: https://lkml.kernel.org/r/20230104222944.2380117-1-nphamcs@gmail.com
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Co-developed-by: Nhat Pham <nphamcs@gmail.com>
Signed-off-by: Nhat Pham <nphamcs@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-01-18 17:12:53 -08:00
Yu Zhao 391655fe08 mm: multi-gen LRU: rename lru_gen_struct to lru_gen_folio
Patch series "mm: multi-gen LRU: memcg LRU", v3.

Overview
========

An memcg LRU is a per-node LRU of memcgs.  It is also an LRU of LRUs,
since each node and memcg combination has an LRU of folios (see
mem_cgroup_lruvec()).

Its goal is to improve the scalability of global reclaim, which is
critical to system-wide memory overcommit in data centers.  Note that
memcg reclaim is currently out of scope.

Its memory bloat is a pointer to each lruvec and negligible to each
pglist_data.  In terms of traversing memcgs during global reclaim, it
improves the best-case complexity from O(n) to O(1) and does not affect
the worst-case complexity O(n).  Therefore, on average, it has a sublinear
complexity in contrast to the current linear complexity.

The basic structure of an memcg LRU can be understood by an analogy to
the active/inactive LRU (of folios):
1. It has the young and the old (generations), i.e., the counterparts
   to the active and the inactive;
2. The increment of max_seq triggers promotion, i.e., the counterpart
   to activation;
3. Other events trigger similar operations, e.g., offlining an memcg
   triggers demotion, i.e., the counterpart to deactivation.

In terms of global reclaim, it has two distinct features:
1. Sharding, which allows each thread to start at a random memcg (in
   the old generation) and improves parallelism;
2. Eventual fairness, which allows direct reclaim to bail out at will
   and reduces latency without affecting fairness over some time.

The commit message in patch 6 details the workflow:
https://lore.kernel.org/r/20221222041905.2431096-7-yuzhao@google.com/

The following is a simple test to quickly verify its effectiveness.

  Test design:
  1. Create multiple memcgs.
  2. Each memcg contains a job (fio).
  3. All jobs access the same amount of memory randomly.
  4. The system does not experience global memory pressure.
  5. Periodically write to the root memory.reclaim.

  Desired outcome:
  1. All memcgs have similar pgsteal counts, i.e., stddev(pgsteal)
     over mean(pgsteal) is close to 0%.
  2. The total pgsteal is close to the total requested through
     memory.reclaim, i.e., sum(pgsteal) over sum(requested) is close
     to 100%.

  Actual outcome [1]:
                                     MGLRU off    MGLRU on
  stddev(pgsteal) / mean(pgsteal)    75%          20%
  sum(pgsteal) / sum(requested)      425%         95%

  ####################################################################
  MEMCGS=128

  for ((memcg = 0; memcg < $MEMCGS; memcg++)); do
      mkdir /sys/fs/cgroup/memcg$memcg
  done

  start() {
      echo $BASHPID > /sys/fs/cgroup/memcg$memcg/cgroup.procs

      fio -name=memcg$memcg --numjobs=1 --ioengine=mmap \
          --filename=/dev/zero --size=1920M --rw=randrw \
          --rate=64m,64m --random_distribution=random \
          --fadvise_hint=0 --time_based --runtime=10h \
          --group_reporting --minimal
  }

  for ((memcg = 0; memcg < $MEMCGS; memcg++)); do
      start &
  done

  sleep 600

  for ((i = 0; i < 600; i++)); do
      echo 256m >/sys/fs/cgroup/memory.reclaim
      sleep 6
  done

  for ((memcg = 0; memcg < $MEMCGS; memcg++)); do
      grep "pgsteal " /sys/fs/cgroup/memcg$memcg/memory.stat
  done
  ####################################################################

[1]: This was obtained from running the above script (touches less
     than 256GB memory) on an EPYC 7B13 with 512GB DRAM for over an
     hour.


This patch (of 8):

The new name lru_gen_folio will be more distinct from the coming
lru_gen_memcg.

Link: https://lkml.kernel.org/r/20221222041905.2431096-1-yuzhao@google.com
Link: https://lkml.kernel.org/r/20221222041905.2431096-2-yuzhao@google.com
Signed-off-by: Yu Zhao <yuzhao@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Michael Larabel <Michael@MichaelLarabel.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Suren Baghdasaryan <surenb@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-01-18 17:12:48 -08:00
Vishal Moola (Oracle) 6e1ca48d06 folio-compat: remove lru_cache_add()
There are no longer any callers of lru_cache_add(), so remove it.  This
saves 79 bytes of kernel text.  Also cleanup some comments such that
they reference the new folio_add_lru() instead.

Link: https://lkml.kernel.org/r/20221101175326.13265-6-vishal.moola@gmail.com
Signed-off-by: Vishal Moola (Oracle) <vishal.moola@gmail.com>
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-12-11 18:12:13 -08:00
Johannes Weiner 0538a82c39 mm: vmscan: make rotations a secondary factor in balancing anon vs file
We noticed a 2% webserver throughput regression after upgrading from 5.6. 
This could be tracked down to a shift in the anon/file reclaim balance
(confirmed with swappiness) that resulted in worse reclaim efficiency and
thus more kswapd activity for the same outcome.

The change that exposed the problem is aae466b005 ("mm/swap: implement
workingset detection for anonymous LRU").  By qualifying swapins based on
their refault distance, it lowered the cost of anon reclaim in this
workload, in turn causing (much) more anon scanning than before.  Scanning
the anon list is more expensive due to the higher ratio of mmapped pages
that may rotate during reclaim, and so the result was an increase in %sys
time.

Right now, rotations aren't considered a cost when balancing scan pressure
between LRUs.  We can end up with very few file refaults putting all the
scan pressure on hot anon pages that are rotated en masse, don't get
reclaimed, and never push back on the file LRU again.  We still only
reclaim file cache in that case, but we burn a lot CPU rotating anon
pages.  It's "fair" from an LRU age POV, but doesn't reflect the real cost
it imposes on the system.

Consider rotations as a secondary factor in balancing the LRUs.  This
doesn't attempt to make a precise comparison between IO cost and CPU cost,
it just says: if reloads are about comparable between the lists, or
rotations are overwhelmingly different, adjust for CPU work.

This fixed the regression on our webservers.  It has since been deployed
to the entire Meta fleet and hasn't caused any problems.

Link: https://lkml.kernel.org/r/20221013193113.726425-1-hannes@cmpxchg.org
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Rik van Riel <riel@surriel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-11-08 17:37:11 -08:00
Yu Zhao ac35a49023 mm: multi-gen LRU: minimal implementation
To avoid confusion, the terms "promotion" and "demotion" will be applied
to the multi-gen LRU, as a new convention; the terms "activation" and
"deactivation" will be applied to the active/inactive LRU, as usual.

The aging produces young generations.  Given an lruvec, it increments
max_seq when max_seq-min_seq+1 approaches MIN_NR_GENS.  The aging promotes
hot pages to the youngest generation when it finds them accessed through
page tables; the demotion of cold pages happens consequently when it
increments max_seq.  Promotion in the aging path does not involve any LRU
list operations, only the updates of the gen counter and
lrugen->nr_pages[]; demotion, unless as the result of the increment of
max_seq, requires LRU list operations, e.g., lru_deactivate_fn().  The
aging has the complexity O(nr_hot_pages), since it is only interested in
hot pages.

The eviction consumes old generations.  Given an lruvec, it increments
min_seq when lrugen->lists[] indexed by min_seq%MAX_NR_GENS becomes empty.
A feedback loop modeled after the PID controller monitors refaults over
anon and file types and decides which type to evict when both types are
available from the same generation.

The protection of pages accessed multiple times through file descriptors
takes place in the eviction path.  Each generation is divided into
multiple tiers.  A page accessed N times through file descriptors is in
tier order_base_2(N).  Tiers do not have dedicated lrugen->lists[], only
bits in folio->flags.  The aforementioned feedback loop also monitors
refaults over all tiers and decides when to protect pages in which tiers
(N>1), using the first tier (N=0,1) as a baseline.  The first tier
contains single-use unmapped clean pages, which are most likely the best
choices.  In contrast to promotion in the aging path, the protection of a
page in the eviction path is achieved by moving this page to the next
generation, i.e., min_seq+1, if the feedback loop decides so.  This
approach has the following advantages:

1. It removes the cost of activation in the buffered access path by
   inferring whether pages accessed multiple times through file
   descriptors are statistically hot and thus worth protecting in the
   eviction path.
2. It takes pages accessed through page tables into account and avoids
   overprotecting pages accessed multiple times through file
   descriptors. (Pages accessed through page tables are in the first
   tier, since N=0.)
3. More tiers provide better protection for pages accessed more than
   twice through file descriptors, when under heavy buffered I/O
   workloads.

Server benchmark results:
  Single workload:
    fio (buffered I/O): +[30, 32]%
                IOPS         BW
      5.19-rc1: 2673k        10.2GiB/s
      patch1-6: 3491k        13.3GiB/s

  Single workload:
    memcached (anon): -[4, 6]%
                Ops/sec      KB/sec
      5.19-rc1: 1161501.04   45177.25
      patch1-6: 1106168.46   43025.04

  Configurations:
    CPU: two Xeon 6154
    Mem: total 256G

    Node 1 was only used as a ram disk to reduce the variance in the
    results.

    patch drivers/block/brd.c <<EOF
    99,100c99,100
    < 	gfp_flags = GFP_NOIO | __GFP_ZERO | __GFP_HIGHMEM;
    < 	page = alloc_page(gfp_flags);
    ---
    > 	gfp_flags = GFP_NOIO | __GFP_ZERO | __GFP_HIGHMEM | __GFP_THISNODE;
    > 	page = alloc_pages_node(1, gfp_flags, 0);
    EOF

    cat >>/etc/systemd/system.conf <<EOF
    CPUAffinity=numa
    NUMAPolicy=bind
    NUMAMask=0
    EOF

    cat >>/etc/memcached.conf <<EOF
    -m 184320
    -s /var/run/memcached/memcached.sock
    -a 0766
    -t 36
    -B binary
    EOF

    cat fio.sh
    modprobe brd rd_nr=1 rd_size=113246208
    swapoff -a
    mkfs.ext4 /dev/ram0
    mount -t ext4 /dev/ram0 /mnt

    mkdir /sys/fs/cgroup/user.slice/test
    echo 38654705664 >/sys/fs/cgroup/user.slice/test/memory.max
    echo $$ >/sys/fs/cgroup/user.slice/test/cgroup.procs
    fio -name=mglru --numjobs=72 --directory=/mnt --size=1408m \
      --buffered=1 --ioengine=io_uring --iodepth=128 \
      --iodepth_batch_submit=32 --iodepth_batch_complete=32 \
      --rw=randread --random_distribution=random --norandommap \
      --time_based --ramp_time=10m --runtime=5m --group_reporting

    cat memcached.sh
    modprobe brd rd_nr=1 rd_size=113246208
    swapoff -a
    mkswap /dev/ram0
    swapon /dev/ram0

    memtier_benchmark -S /var/run/memcached/memcached.sock \
      -P memcache_binary -n allkeys --key-minimum=1 \
      --key-maximum=65000000 --key-pattern=P:P -c 1 -t 36 \
      --ratio 1:0 --pipeline 8 -d 2000

    memtier_benchmark -S /var/run/memcached/memcached.sock \
      -P memcache_binary -n allkeys --key-minimum=1 \
      --key-maximum=65000000 --key-pattern=R:R -c 1 -t 36 \
      --ratio 0:1 --pipeline 8 --randomize --distinct-client-seed

Client benchmark results:
  kswapd profiles:
    5.19-rc1
      40.33%  page_vma_mapped_walk (overhead)
      21.80%  lzo1x_1_do_compress (real work)
       7.53%  do_raw_spin_lock
       3.95%  _raw_spin_unlock_irq
       2.52%  vma_interval_tree_iter_next
       2.37%  folio_referenced_one
       2.28%  vma_interval_tree_subtree_search
       1.97%  anon_vma_interval_tree_iter_first
       1.60%  ptep_clear_flush
       1.06%  __zram_bvec_write

    patch1-6
      39.03%  lzo1x_1_do_compress (real work)
      18.47%  page_vma_mapped_walk (overhead)
       6.74%  _raw_spin_unlock_irq
       3.97%  do_raw_spin_lock
       2.49%  ptep_clear_flush
       2.48%  anon_vma_interval_tree_iter_first
       1.92%  folio_referenced_one
       1.88%  __zram_bvec_write
       1.48%  memmove
       1.31%  vma_interval_tree_iter_next

  Configurations:
    CPU: single Snapdragon 7c
    Mem: total 4G

    ChromeOS MemoryPressure [1]

[1] https://chromium.googlesource.com/chromiumos/platform/tast-tests/

Link: https://lkml.kernel.org/r/20220918080010.2920238-7-yuzhao@google.com
Signed-off-by: Yu Zhao <yuzhao@google.com>
Acked-by: Brian Geffon <bgeffon@google.com>
Acked-by: Jan Alexander Steffens (heftig) <heftig@archlinux.org>
Acked-by: Oleksandr Natalenko <oleksandr@natalenko.name>
Acked-by: Steven Barrett <steven@liquorix.net>
Acked-by: Suleiman Souhlal <suleiman@google.com>
Tested-by: Daniel Byrne <djbyrne@mtu.edu>
Tested-by: Donald Carr <d@chaos-reins.com>
Tested-by: Holger Hoffstätte <holger@applied-asynchrony.com>
Tested-by: Konstantin Kharlamov <Hi-Angel@yandex.ru>
Tested-by: Shuang Zhai <szhai2@cs.rochester.edu>
Tested-by: Sofia Trinh <sofia.trinh@edi.works>
Tested-by: Vaibhav Jain <vaibhav@linux.ibm.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Cc: Barry Song <baohua@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Hillf Danton <hdanton@sina.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Michael Larabel <Michael@MichaelLarabel.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Qi Zheng <zhengqi.arch@bytedance.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-09-26 19:46:09 -07:00
Roman Gushchin e33c267ab7 mm: shrinkers: provide shrinkers with names
Currently shrinkers are anonymous objects.  For debugging purposes they
can be identified by count/scan function names, but it's not always
useful: e.g.  for superblock's shrinkers it's nice to have at least an
idea of to which superblock the shrinker belongs.

This commit adds names to shrinkers.  register_shrinker() and
prealloc_shrinker() functions are extended to take a format and arguments
to master a name.

In some cases it's not possible to determine a good name at the time when
a shrinker is allocated.  For such cases shrinker_debugfs_rename() is
provided.

The expected format is:
    <subsystem>-<shrinker_type>[:<instance>]-<id>
For some shrinkers an instance can be encoded as (MAJOR:MINOR) pair.

After this change the shrinker debugfs directory looks like:
  $ cd /sys/kernel/debug/shrinker/
  $ ls
    dquota-cache-16     sb-devpts-28     sb-proc-47       sb-tmpfs-42
    mm-shadow-18        sb-devtmpfs-5    sb-proc-48       sb-tmpfs-43
    mm-zspool:zram0-34  sb-hugetlbfs-17  sb-pstore-31     sb-tmpfs-44
    rcu-kfree-0         sb-hugetlbfs-33  sb-rootfs-2      sb-tmpfs-49
    sb-aio-20           sb-iomem-12      sb-securityfs-6  sb-tracefs-13
    sb-anon_inodefs-15  sb-mqueue-21     sb-selinuxfs-22  sb-xfs:vda1-36
    sb-bdev-3           sb-nsfs-4        sb-sockfs-8      sb-zsmalloc-19
    sb-bpf-32           sb-pipefs-14     sb-sysfs-26      thp-deferred_split-10
    sb-btrfs:vda2-24    sb-proc-25       sb-tmpfs-1       thp-zero-9
    sb-cgroup2-30       sb-proc-39       sb-tmpfs-27      xfs-buf:vda1-37
    sb-configfs-23      sb-proc-41       sb-tmpfs-29      xfs-inodegc:vda1-38
    sb-dax-11           sb-proc-45       sb-tmpfs-35
    sb-debugfs-7        sb-proc-46       sb-tmpfs-40

[roman.gushchin@linux.dev: fix build warnings]
  Link: https://lkml.kernel.org/r/Yr+ZTnLb9lJk6fJO@castle
  Reported-by: kernel test robot <lkp@intel.com>
Link: https://lkml.kernel.org/r/20220601032227.4076670-4-roman.gushchin@linux.dev
Signed-off-by: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Cc: Dave Chinner <dchinner@redhat.com>
Cc: Hillf Danton <hdanton@sina.com>
Cc: Kent Overstreet <kent.overstreet@gmail.com>
Cc: Muchun Song <songmuchun@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-07-03 18:08:40 -07:00
Shakeel Butt 9b3016154c memcg: sync flush only if periodic flush is delayed
Daniel Dao has reported [1] a regression on workloads that may trigger a
lot of refaults (anon and file).  The underlying issue is that flushing
rstat is expensive.  Although rstat flush are batched with (nr_cpus *
MEMCG_BATCH) stat updates, it seems like there are workloads which
genuinely do stat updates larger than batch value within short amount of
time.  Since the rstat flush can happen in the performance critical
codepaths like page faults, such workload can suffer greatly.

This patch fixes this regression by making the rstat flushing
conditional in the performance critical codepaths.  More specifically,
the kernel relies on the async periodic rstat flusher to flush the stats
and only if the periodic flusher is delayed by more than twice the
amount of its normal time window then the kernel allows rstat flushing
from the performance critical codepaths.

Now the question: what are the side-effects of this change? The worst
that can happen is the refault codepath will see 4sec old lruvec stats
and may cause false (or missed) activations of the refaulted page which
may under-or-overestimate the workingset size.  Though that is not very
concerning as the kernel can already miss or do false activations.

There are two more codepaths whose flushing behavior is not changed by
this patch and we may need to come to them in future.  One is the
writeback stats used by dirty throttling and second is the deactivation
heuristic in the reclaim.  For now keeping an eye on them and if there
is report of regression due to these codepaths, we will reevaluate then.

Link: https://lore.kernel.org/all/CA+wXwBSyO87ZX5PVwdHm-=dBjZYECGmfnydUicUyrQqndgX2MQ@mail.gmail.com [1]
Link: https://lkml.kernel.org/r/20220304184040.1304781-1-shakeelb@google.com
Fixes: 1f828223b7 ("memcg: flush lruvec stats in the refault")
Signed-off-by: Shakeel Butt <shakeelb@google.com>
Reported-by: Daniel Dao <dqminh@cloudflare.com>
Tested-by: Ivan Babrou <ivan@cloudflare.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Koutný <mkoutny@suse.com>
Cc: Frank Hofmann <fhofmann@cloudflare.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-04-21 20:01:09 -07:00
Linus Torvalds 9030fb0bb9 Folio changes for 5.18
- Rewrite how munlock works to massively reduce the contention
    on i_mmap_rwsem (Hugh Dickins):
    https://lore.kernel.org/linux-mm/8e4356d-9622-a7f0-b2c-f116b5f2efea@google.com/
  - Sort out the page refcount mess for ZONE_DEVICE pages (Christoph Hellwig):
    https://lore.kernel.org/linux-mm/20220210072828.2930359-1-hch@lst.de/
  - Convert GUP to use folios and make pincount available for order-1
    pages. (Matthew Wilcox)
  - Convert a few more truncation functions to use folios (Matthew Wilcox)
  - Convert page_vma_mapped_walk to use PFNs instead of pages (Matthew Wilcox)
  - Convert rmap_walk to use folios (Matthew Wilcox)
  - Convert most of shrink_page_list() to use a folio (Matthew Wilcox)
  - Add support for creating large folios in readahead (Matthew Wilcox)
 -----BEGIN PGP SIGNATURE-----
 
 iQEzBAABCgAdFiEEejHryeLBw/spnjHrDpNsjXcpgj4FAmI4ucgACgkQDpNsjXcp
 gj69Wgf6AwqwmO5Tmy+fLScDPqWxmXJofbocae1kyoGHf7Ui91OK4U2j6IpvAr+g
 P/vLIK+JAAcTQcrSCjymuEkf4HkGZOR03QQn7maPIEe4eLrZRQDEsmHC1L9gpeJp
 s/GMvDWiGE0Tnxu0EOzfVi/yT+qjIl/S8VvqtCoJv1HdzxitZ7+1RDuqImaMC5MM
 Qi3uHag78vLmCltLXpIOdpgZhdZexCdL2Y/1npf+b6FVkAJRRNUnA0gRbS7YpoVp
 CbxEJcmAl9cpJLuj5i5kIfS9trr+/QcvbUlzRxh4ggC58iqnmF2V09l2MJ7YU3XL
 v1O/Elq4lRhXninZFQEm9zjrri7LDQ==
 =n9Ad
 -----END PGP SIGNATURE-----

Merge tag 'folio-5.18c' of git://git.infradead.org/users/willy/pagecache

Pull folio updates from Matthew Wilcox:

 - Rewrite how munlock works to massively reduce the contention on
   i_mmap_rwsem (Hugh Dickins):

     https://lore.kernel.org/linux-mm/8e4356d-9622-a7f0-b2c-f116b5f2efea@google.com/

 - Sort out the page refcount mess for ZONE_DEVICE pages (Christoph
   Hellwig):

     https://lore.kernel.org/linux-mm/20220210072828.2930359-1-hch@lst.de/

 - Convert GUP to use folios and make pincount available for order-1
   pages. (Matthew Wilcox)

 - Convert a few more truncation functions to use folios (Matthew
   Wilcox)

 - Convert page_vma_mapped_walk to use PFNs instead of pages (Matthew
   Wilcox)

 - Convert rmap_walk to use folios (Matthew Wilcox)

 - Convert most of shrink_page_list() to use a folio (Matthew Wilcox)

 - Add support for creating large folios in readahead (Matthew Wilcox)

* tag 'folio-5.18c' of git://git.infradead.org/users/willy/pagecache: (114 commits)
  mm/damon: minor cleanup for damon_pa_young
  selftests/vm/transhuge-stress: Support file-backed PMD folios
  mm/filemap: Support VM_HUGEPAGE for file mappings
  mm/readahead: Switch to page_cache_ra_order
  mm/readahead: Align file mappings for non-DAX
  mm/readahead: Add large folio readahead
  mm: Support arbitrary THP sizes
  mm: Make large folios depend on THP
  mm: Fix READ_ONLY_THP warning
  mm/filemap: Allow large folios to be added to the page cache
  mm: Turn can_split_huge_page() into can_split_folio()
  mm/vmscan: Convert pageout() to take a folio
  mm/vmscan: Turn page_check_references() into folio_check_references()
  mm/vmscan: Account large folios correctly
  mm/vmscan: Optimise shrink_page_list for non-PMD-sized folios
  mm/vmscan: Free non-shmem folios without splitting them
  mm/rmap: Constify the rmap_walk_control argument
  mm/rmap: Convert rmap_walk() to take a folio
  mm: Turn page_anon_vma() into folio_anon_vma()
  mm/rmap: Turn page_lock_anon_vma_read() into folio_lock_anon_vma_read()
  ...
2022-03-22 17:03:12 -07:00
Sebastian Andrzej Siewior 2386eef214 mm: workingset: replace IRQ-off check with a lockdep assert.
Commit 68d48e6a2d ("mm: workingset: add vmstat counter for shadow
nodes") introduced an IRQ-off check to ensure that a lock is held which
also disabled interrupts.  This does not work the same way on PREEMPT_RT
because none of the locks, that are held, disable interrupts.

Replace this check with a lockdep assert which ensures that the lock is
held.

Link: https://lkml.kernel.org/r/20220301122143.1521823-3-bigeasy@linutronix.de
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Zefan Li <lizefan.x@bytedance.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-03-22 15:57:08 -07:00
Muchun Song 9bbdc0f324 xarray: use kmem_cache_alloc_lru to allocate xa_node
The workingset will add the xa_node to the shadow_nodes list.  So the
allocation of xa_node should be done by kmem_cache_alloc_lru().  Using
xas_set_lru() to pass the list_lru which we want to insert xa_node into to
set up the xa_node reclaim context correctly.

Link: https://lkml.kernel.org/r/20220228122126.37293-9-songmuchun@bytedance.com
Signed-off-by: Muchun Song <songmuchun@bytedance.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Alex Shi <alexs@kernel.org>
Cc: Anna Schumaker <Anna.Schumaker@Netapp.com>
Cc: Chao Yu <chao@kernel.org>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Fam Zheng <fam.zheng@bytedance.com>
Cc: Jaegeuk Kim <jaegeuk@kernel.org>
Cc: Kari Argillander <kari.argillander@gmail.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Qi Zheng <zhengqi.arch@bytedance.com>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Theodore Ts'o <tytso@mit.edu>
Cc: Trond Myklebust <trond.myklebust@hammerspace.com>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Wei Yang <richard.weiyang@gmail.com>
Cc: Xiongchun Duan <duanxiongchun@bytedance.com>
Cc: Yang Shi <shy828301@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-03-22 15:57:03 -07:00
Matthew Wilcox (Oracle) 8927f6473e mm/workingset: Convert workingset_eviction() to take a folio
This removes an assumption that THPs are the only kind of compound
pages and removes a few hidden calls to compound_head().

Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
2022-03-21 12:59:01 -04:00
Linus Torvalds 59a2ceeef6 Merge branch 'akpm' (patches from Andrew)
Merge more updates from Andrew Morton:
 "87 patches.

  Subsystems affected by this patch series: mm (pagecache and hugetlb),
  procfs, misc, MAINTAINERS, lib, checkpatch, binfmt, kallsyms, ramfs,
  init, codafs, nilfs2, hfs, crash_dump, signals, seq_file, fork,
  sysvfs, kcov, gdb, resource, selftests, and ipc"

* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (87 commits)
  ipc/ipc_sysctl.c: remove fallback for !CONFIG_PROC_SYSCTL
  ipc: check checkpoint_restore_ns_capable() to modify C/R proc files
  selftests/kselftest/runner/run_one(): allow running non-executable files
  virtio-mem: disallow mapping virtio-mem memory via /dev/mem
  kernel/resource: disallow access to exclusive system RAM regions
  kernel/resource: clean up and optimize iomem_is_exclusive()
  scripts/gdb: handle split debug for vmlinux
  kcov: replace local_irq_save() with a local_lock_t
  kcov: avoid enable+disable interrupts if !in_task()
  kcov: allocate per-CPU memory on the relevant node
  Documentation/kcov: define `ip' in the example
  Documentation/kcov: include types.h in the example
  sysv: use BUILD_BUG_ON instead of runtime check
  kernel/fork.c: unshare(): use swap() to make code cleaner
  seq_file: fix passing wrong private data
  seq_file: move seq_escape() to a header
  signal: remove duplicate include in signal.h
  crash_dump: remove duplicate include in crash_dump.h
  crash_dump: fix boolreturn.cocci warning
  hfs/hfsplus: use WARN_ON for sanity check
  ...
2021-11-09 10:11:53 -08:00
Johannes Weiner 51b8c1fe25 vfs: keep inodes with page cache off the inode shrinker LRU
Historically (pre-2.5), the inode shrinker used to reclaim only empty
inodes and skip over those that still contained page cache.  This caused
problems on highmem hosts: struct inode could put fill lowmem zones
before the cache was getting reclaimed in the highmem zones.

To address this, the inode shrinker started to strip page cache to
facilitate reclaiming lowmem.  However, this comes with its own set of
problems: the shrinkers may drop actively used page cache just because
the inodes are not currently open or dirty - think working with a large
git tree.  It further doesn't respect cgroup memory protection settings
and can cause priority inversions between containers.

Nowadays, the page cache also holds non-resident info for evicted cache
pages in order to detect refaults.  We've come to rely heavily on this
data inside reclaim for protecting the cache workingset and driving swap
behavior.  We also use it to quantify and report workload health through
psi.  The latter in turn is used for fleet health monitoring, as well as
driving automated memory sizing of workloads and containers, proactive
reclaim and memory offloading schemes.

The consequences of dropping page cache prematurely is that we're seeing
subtle and not-so-subtle failures in all of the above-mentioned
scenarios, with the workload generally entering unexpected thrashing
states while losing the ability to reliably detect it.

To fix this on non-highmem systems at least, going back to rotating
inodes on the LRU isn't feasible.  We've tried (commit a76cf1a474
("mm: don't reclaim inodes with many attached pages")) and failed
(commit 69056ee6a8 ("Revert "mm: don't reclaim inodes with many
attached pages"")).

The issue is mostly that shrinker pools attract pressure based on their
size, and when objects get skipped the shrinkers remember this as
deferred reclaim work.  This accumulates excessive pressure on the
remaining inodes, and we can quickly eat into heavily used ones, or
dirty ones that require IO to reclaim, when there potentially is plenty
of cold, clean cache around still.

Instead, this patch keeps populated inodes off the inode LRU in the
first place - just like an open file or dirty state would.  An otherwise
clean and unused inode then gets queued when the last cache entry
disappears.  This solves the problem without reintroducing the reclaim
issues, and generally is a bit more scalable than having to wade through
potentially hundreds of thousands of busy inodes.

Locking is a bit tricky because the locks protecting the inode state
(i_lock) and the inode LRU (lru_list.lock) don't nest inside the
irq-safe page cache lock (i_pages.xa_lock).  Page cache deletions are
serialized through i_lock, taken before the i_pages lock, to make sure
depopulated inodes are queued reliably.  Additions may race with
deletions, but we'll check again in the shrinker.  If additions race
with the shrinker itself, we're protected by the i_lock: if find_inode()
or iput() win, the shrinker will bail on the elevated i_count or
I_REFERENCED; if the shrinker wins and goes ahead with the inode, it
will set I_FREEING and inhibit further igets(), which will cause the
other side to create a new instance of the inode instead.

Link: https://lkml.kernel.org/r/20210614211904.14420-4-hannes@cmpxchg.org
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Roman Gushchin <guro@fb.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Dave Chinner <david@fromorbit.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-11-09 10:02:48 -08:00
Matthew Wilcox (Oracle) 0995d7e568 mm/workingset: Convert workingset_refault() to take a folio
This nets us 178 bytes of savings from removing calls to compound_head.
The three callers all grow a little, but each of them will be converted
to use folios soon, so that's fine.

Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Howells <dhowells@redhat.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
2021-10-18 07:49:40 -04:00
Matthew Wilcox (Oracle) c5ce619a77 mm/workingset: Convert workingset_activation to take a folio
This function already assumed it was being passed a head page.  No real
change here, except that thp_nr_pages() compiles away on kernels with
THP compiled out while folio_nr_pages() is always present.  Also convert
page_memcg_rcu() to folio_memcg_rcu().

Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Howells <dhowells@redhat.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
2021-09-27 09:27:32 -04:00
Matthew Wilcox (Oracle) b1baabd995 mm/memcg: Add folio_lruvec()
This replaces mem_cgroup_page_lruvec().  All callers converted.

Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Acked-by: Mike Rapoport <rppt@linux.ibm.com>
Reviewed-by: David Howells <dhowells@redhat.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
2021-09-27 09:27:31 -04:00
Shakeel Butt 1f828223b7 memcg: flush lruvec stats in the refault
Prior to the commit 7e1c0d6f58 ("memcg: switch lruvec stats to rstat")
and the commit aa48e47e39 ("memcg: infrastructure to flush memcg
stats"), each lruvec memcg stats can be off by (nr_cgroups * nr_cpus *
32) at worst and for unbounded amount of time.  The commit aa48e47e39
moved the lruvec stats to rstat infrastructure and the commit
7e1c0d6f58 bounded the error for all the lruvec stats to (nr_cpus *
32) at worst for at most 2 seconds.  More specifically it decoupled the
number of stats and the number of cgroups from the error rate.

However this reduction in error comes with the cost of triggering the
slowpath of stats update more frequently.  Previously in the slowpath
the kernel adds the stats up the memcg tree.  After aa48e47e39, the
kernel triggers the asyn lruvec stats flush through queue_work().  This
causes regression reports from 0day kernel bot [1] as well as from
phoronix test suite [2].

We tried two options to fix the regression:

 1) Increase the threshold to trigger the slowpath in lruvec stats
    update codepath from 32 to 512.

 2) Remove the slowpath from lruvec stats update codepath and instead
    flush the stats in the page refault codepath. The assumption is that
    the kernel timely flush the stats, so, the update tree would be
    small in the refault codepath to not cause the preformance impact.

Following are the results of will-it-scale/page_fault[1|2|3] benchmark
on four settings i.e.  (1) 5.15-rc1 as baseline (2) 5.15-rc1 with
aa48e47e39 and 7e1c0d6f58 reverted (3) 5.15-rc1 with option-1
(4) 5.15-rc1 with option-2.

  test       (1)      (2)               (3)               (4)
  pg_f1   368563   406277 (10.23%)   399693  (8.44%)   416398 (12.97%)
  pg_f2   338399   372133  (9.96%)   369180  (9.09%)   381024 (12.59%)
  pg_f3   500853   575399 (14.88%)   570388 (13.88%)   576083 (15.02%)

From the above result, it seems like the option-2 not only solves the
regression but also improves the performance for at least these
benchmarks.

Feng Tang (intel) ran the aim7 benchmark with these two options and
confirms that option-1 reduces the regression but option-2 removes the
regression.

Michael Larabel (phoronix) ran multiple benchmarks with these options
and reported the results at [3] and it shows for most benchmarks
option-2 removes the regression introduced by the commit aa48e47e39
("memcg: infrastructure to flush memcg stats").

Based on the experiment results, this patch proposed the option-2 as the
solution to resolve the regression.

Link: https://lore.kernel.org/all/20210726022421.GB21872@xsang-OptiPlex-9020 [1]
Link: https://www.phoronix.com/scan.php?page=article&item=linux515-compile-regress [2]
Link: https://openbenchmarking.org/result/2109226-DEBU-LINUX5104 [3]
Fixes: aa48e47e39 ("memcg: infrastructure to flush memcg stats")
Signed-off-by: Shakeel Butt <shakeelb@google.com>
Tested-by: Michael Larabel <Michael@phoronix.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Roman Gushchin <guro@fb.com>
Cc: Feng Tang <feng.tang@intel.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Hillf Danton <hdanton@sina.com>,
Cc: Michal Koutný <mkoutny@suse.com>
Cc: Andrew Morton <akpm@linux-foundation.org>,
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-09-23 10:09:13 -07:00
Randy Dunlap 560a870570 mm/workingset: correct kernel-doc notations
Use the documented kernel-doc format to prevent kernel-doc warnings.

mm/workingset.c:256: warning: No description found for return value of 'workingset_eviction'
mm/workingset.c:285: warning: Function parameter or member 'folio' not described in 'workingset_refault'
mm/workingset.c:285: warning: Excess function parameter 'page' description in 'workingset_refault'

Link: https://lkml.kernel.org/r/20210808203153.10678-1-rdunlap@infradead.org
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-09-08 11:50:28 -07:00
Miaohe Lin 3ebc57f403 mm: workingset: define macro WORKINGSET_SHIFT
The magic number 1 is used in several places in workingset.c.  Define a
macro WORKINGSET_SHIFT for it to improve code readability.

Link: https://lkml.kernel.org/r/20210624122307.1759342-1-linmiaohe@huawei.com
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-06-30 20:47:28 -07:00
Muchun Song a984226f45 mm: memcontrol: remove the pgdata parameter of mem_cgroup_page_lruvec
All the callers of mem_cgroup_page_lruvec() just pass page_pgdat(page) as
the 2nd parameter to it (except isolate_migratepages_block()).  But for
isolate_migratepages_block(), the page_pgdat(page) is also equal to the
local variable of @pgdat.  So mem_cgroup_page_lruvec() do not need the
pgdat parameter.  Just remove it to simplify the code.

Link: https://lkml.kernel.org/r/20210417043538.9793-4-songmuchun@bytedance.com
Signed-off-by: Muchun Song <songmuchun@bytedance.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Acked-by: Roman Gushchin <guro@fb.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Cc: Xiongchun Duan <duanxiongchun@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-06-29 10:53:50 -07:00
Matthew Wilcox (Oracle) 46be67b424 mm: stop accounting shadow entries
We no longer need to keep track of how many shadow entries are present in
a mapping.  This saves a few writes to the inode and memory barriers.

Link: https://lkml.kernel.org/r/20201026151849.24232-3-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Tested-by: Vishal Verma <vishal.l.verma@intel.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-05-05 11:27:19 -07:00
Oscar Salvador aeddcee6c1 mm: workingset: clarify eviction order and distance calculation
The premise of the refault distance is that it can be seen as a deficit of
the inactive list space, so that if the inactive list would have had (R -
E) more slots, the page would not have been evicted but promoted to the
active list instead.

However, the way the code is ordered right now set us to be off by one, so
the real number of slots would be (R - E) + 1.  I stumbled upon this when
trying to understand the code and it puzzled me that the comments did not
match what the code did.

This it not an issue at all since evictions and refaults tend to happen in
a number large enough that being off-by-one does not have any impact - and
since the compiler and CPUs are free to rearrange the execution sequence
anyway.

But as Johannes says, it is better to re-arrange the code in the proper
order since otherwise would be misleading to somebody who is actively
reading and trying to understand the logic of the code - like it happened
to me.

Link: https://lkml.kernel.org/r/20210201060651.3781-1-osalvador@suse.de
Signed-off-by: Oscar Salvador <osalvador@suse.de>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-02-24 13:38:34 -08:00
Miaohe Lin 725cac1c7e mm/workingset.c: avoid unnecessary max_nodes estimation in count_shadow_nodes()
If list_lru_shrink_count is 0, we always return SHRINK_EMPTY regardless of
the value of max_nodes.  So we can return early if nodes == 0 to save some
cpu cycles of approximating a reasonable limit for the nodes.

Link: https://lkml.kernel.org/r/20210123073825.46709-1-linmiaohe@huawei.com
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-02-24 13:38:33 -08:00
Linus Torvalds 5b200f5789 Merge branch 'akpm' (patches from Andrew)
Merge more updates from Andrew Morton:
 "More MM work: a memcg scalability improvememt"

* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
  mm/lru: revise the comments of lru_lock
  mm/lru: introduce relock_page_lruvec()
  mm/lru: replace pgdat lru_lock with lruvec lock
  mm/swap.c: serialize memcg changes in pagevec_lru_move_fn
  mm/compaction: do page isolation first in compaction
  mm/lru: introduce TestClearPageLRU()
  mm/mlock: remove __munlock_isolate_lru_page()
  mm/mlock: remove lru_lock on TestClearPageMlocked
  mm/vmscan: remove lruvec reget in move_pages_to_lru
  mm/lru: move lock into lru_note_cost
  mm/swap.c: fold vm event PGROTATED into pagevec_move_tail_fn
  mm/memcg: add debug checking in lock_page_memcg
  mm: page_idle_get_page() does not need lru_lock
  mm/rmap: stop store reordering issue on page->mapping
  mm/vmscan: remove unnecessary lruvec adding
  mm/thp: narrow lru locking
  mm/thp: simplify lru_add_page_tail()
  mm/thp: use head for head page in lru_add_page_tail()
  mm/thp: move lru_add_page_tail() to huge_memory.c
2020-12-15 14:55:10 -08:00
Alex Shi 75cc3c9161 mm/lru: move lock into lru_note_cost
We have to move lru_lock into lru_note_cost, since it cycle up on memcg
tree, for future per lruvec lru_lock replace.  It's a bit ugly and may
cost a bit more locking, but benefit from multiple memcg locking could
cover the lost.

Link: https://lkml.kernel.org/r/1604566549-62481-11-git-send-email-alex.shi@linux.alibaba.com
Signed-off-by: Alex Shi <alex.shi@linux.alibaba.com>
Acked-by: Hugh Dickins <hughd@google.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Alexander Duyck <alexander.duyck@gmail.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: "Chen, Rong A" <rong.a.chen@intel.com>
Cc: Daniel Jordan <daniel.m.jordan@oracle.com>
Cc: "Huang, Ying" <ying.huang@intel.com>
Cc: Jann Horn <jannh@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Kirill A. Shutemov <kirill@shutemov.name>
Cc: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mika Penttilä <mika.penttila@nextfour.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Wei Yang <richard.weiyang@gmail.com>
Cc: Yang Shi <yang.shi@linux.alibaba.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-12-15 14:48:03 -08:00
Linus Torvalds d635a69dd4 Networking updates for 5.11
Core:
 
  - support "prefer busy polling" NAPI operation mode, where we defer softirq
    for some time expecting applications to periodically busy poll
 
  - AF_XDP: improve efficiency by more batching and hindering
            the adjacency cache prefetcher
 
  - af_packet: make packet_fanout.arr size configurable up to 64K
 
  - tcp: optimize TCP zero copy receive in presence of partial or unaligned
         reads making zero copy a performance win for much smaller messages
 
  - XDP: add bulk APIs for returning / freeing frames
 
  - sched: support fragmenting IP packets as they come out of conntrack
 
  - net: allow virtual netdevs to forward UDP L4 and fraglist GSO skbs
 
 BPF:
 
  - BPF switch from crude rlimit-based to memcg-based memory accounting
 
  - BPF type format information for kernel modules and related tracing
    enhancements
 
  - BPF implement task local storage for BPF LSM
 
  - allow the FENTRY/FEXIT/RAW_TP tracing programs to use bpf_sk_storage
 
 Protocols:
 
  - mptcp: improve multiple xmit streams support, memory accounting and
           many smaller improvements
 
  - TLS: support CHACHA20-POLY1305 cipher
 
  - seg6: add support for SRv6 End.DT4/DT6 behavior
 
  - sctp: Implement RFC 6951: UDP Encapsulation of SCTP
 
  - ppp_generic: add ability to bridge channels directly
 
  - bridge: Connectivity Fault Management (CFM) support as is defined in
            IEEE 802.1Q section 12.14.
 
 Drivers:
 
  - mlx5: make use of the new auxiliary bus to organize the driver internals
 
  - mlx5: more accurate port TX timestamping support
 
  - mlxsw:
    - improve the efficiency of offloaded next hop updates by using
      the new nexthop object API
    - support blackhole nexthops
    - support IEEE 802.1ad (Q-in-Q) bridging
 
  - rtw88: major bluetooth co-existance improvements
 
  - iwlwifi: support new 6 GHz frequency band
 
  - ath11k: Fast Initial Link Setup (FILS)
 
  - mt7915: dual band concurrent (DBDC) support
 
  - net: ipa: add basic support for IPA v4.5
 
 Refactor:
 
  - a few pieces of in_interrupt() cleanup work from Sebastian Andrzej Siewior
 
  - phy: add support for shared interrupts; get rid of multiple driver
         APIs and have the drivers write a full IRQ handler, slight growth
 	of driver code should be compensated by the simpler API which
 	also allows shared IRQs
 
  - add common code for handling netdev per-cpu counters
 
  - move TX packet re-allocation from Ethernet switch tag drivers to
    a central place
 
  - improve efficiency and rename nla_strlcpy
 
  - number of W=1 warning cleanups as we now catch those in a patchwork
    build bot
 
 Old code removal:
 
  - wan: delete the DLCI / SDLA drivers
 
  - wimax: move to staging
 
  - wifi: remove old WDS wifi bridging support
 
 Signed-off-by: Jakub Kicinski <kuba@kernel.org>
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEE6jPA+I1ugmIBA4hXMUZtbf5SIrsFAl/YXmUACgkQMUZtbf5S
 IrvSQBAAgOrt4EFopEvVqlTHZbqI45IEqgtXS+YWmlgnjZCgshyMj8q1yK1zzane
 qYxr/NNJ9kV3FdtaynmmHPgEEEfR5kJ/D3B2BsxYDkaDDrD0vbNsBGw+L+/Gbhxl
 N/5l/9FjLyLY1D+EErknuwR5XGuQ6BSDVaKQMhYOiK2hgdnAAI4hszo8Chf6wdD0
 XDBslQ7vpD/05r+eMj0IkS5dSAoGOIFXUxhJ5dqrDbRHiKsIyWqA3PLbYemfAhxI
 s2XckjfmSgGE3FKL8PSFu+EcfHbJQQjLcULJUnqgVcdwEEtRuE9ggEi52nZRXMWM
 4e8sQJAR9Fx7pZy0G1xfS149j6iPU5LjRlU9TNSpVABz14Vvvo3gEL6gyIdsz+xh
 hMN7UBdp0FEaP028CXoIYpaBesvQqj0BSndmee8qsYAtN6j+QKcM2AOSr7JN1uMH
 C/86EDoGAATiEQIVWJvnX5MPmlAoblyLA+RuVhmxkIBx2InGXkFmWqRkXT5l4jtk
 LVl8/TArR4alSQqLXictXCjYlCm9j5N4zFFtEVasSYi7/ZoPfgRNWT+lJ2R8Y+Zv
 +htzGaFuyj6RJTVeFQMrkl3whAtBamo2a0kwg45NnxmmXcspN6kJX1WOIy82+MhD
 Yht7uplSs7MGKA78q/CDU0XBeGjpABUvmplUQBIfrR/jKLW2730=
 =GXs1
 -----END PGP SIGNATURE-----

Merge tag 'net-next-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Pull networking updates from Jakub Kicinski:
 "Core:

   - support "prefer busy polling" NAPI operation mode, where we defer
     softirq for some time expecting applications to periodically busy
     poll

   - AF_XDP: improve efficiency by more batching and hindering the
     adjacency cache prefetcher

   - af_packet: make packet_fanout.arr size configurable up to 64K

   - tcp: optimize TCP zero copy receive in presence of partial or
     unaligned reads making zero copy a performance win for much smaller
     messages

   - XDP: add bulk APIs for returning / freeing frames

   - sched: support fragmenting IP packets as they come out of conntrack

   - net: allow virtual netdevs to forward UDP L4 and fraglist GSO skbs

  BPF:

   - BPF switch from crude rlimit-based to memcg-based memory accounting

   - BPF type format information for kernel modules and related tracing
     enhancements

   - BPF implement task local storage for BPF LSM

   - allow the FENTRY/FEXIT/RAW_TP tracing programs to use
     bpf_sk_storage

  Protocols:

   - mptcp: improve multiple xmit streams support, memory accounting and
     many smaller improvements

   - TLS: support CHACHA20-POLY1305 cipher

   - seg6: add support for SRv6 End.DT4/DT6 behavior

   - sctp: Implement RFC 6951: UDP Encapsulation of SCTP

   - ppp_generic: add ability to bridge channels directly

   - bridge: Connectivity Fault Management (CFM) support as is defined
     in IEEE 802.1Q section 12.14.

  Drivers:

   - mlx5: make use of the new auxiliary bus to organize the driver
     internals

   - mlx5: more accurate port TX timestamping support

   - mlxsw:
      - improve the efficiency of offloaded next hop updates by using
        the new nexthop object API
      - support blackhole nexthops
      - support IEEE 802.1ad (Q-in-Q) bridging

   - rtw88: major bluetooth co-existance improvements

   - iwlwifi: support new 6 GHz frequency band

   - ath11k: Fast Initial Link Setup (FILS)

   - mt7915: dual band concurrent (DBDC) support

   - net: ipa: add basic support for IPA v4.5

  Refactor:

   - a few pieces of in_interrupt() cleanup work from Sebastian Andrzej
     Siewior

   - phy: add support for shared interrupts; get rid of multiple driver
     APIs and have the drivers write a full IRQ handler, slight growth
     of driver code should be compensated by the simpler API which also
     allows shared IRQs

   - add common code for handling netdev per-cpu counters

   - move TX packet re-allocation from Ethernet switch tag drivers to a
     central place

   - improve efficiency and rename nla_strlcpy

   - number of W=1 warning cleanups as we now catch those in a patchwork
     build bot

  Old code removal:

   - wan: delete the DLCI / SDLA drivers

   - wimax: move to staging

   - wifi: remove old WDS wifi bridging support"

* tag 'net-next-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1922 commits)
  net: hns3: fix expression that is currently always true
  net: fix proc_fs init handling in af_packet and tls
  nfc: pn533: convert comma to semicolon
  af_vsock: Assign the vsock transport considering the vsock address flags
  af_vsock: Set VMADDR_FLAG_TO_HOST flag on the receive path
  vsock_addr: Check for supported flag values
  vm_sockets: Add VMADDR_FLAG_TO_HOST vsock flag
  vm_sockets: Add flags field in the vsock address data structure
  net: Disable NETIF_F_HW_TLS_TX when HW_CSUM is disabled
  tcp: Add logic to check for SYN w/ data in tcp_simple_retransmit
  net: mscc: ocelot: install MAC addresses in .ndo_set_rx_mode from process context
  nfc: s3fwrn5: Release the nfc firmware
  net: vxget: clean up sparse warnings
  mlxsw: spectrum_router: Use eXtended mezzanine to offload IPv4 router
  mlxsw: spectrum: Set KVH XLT cache mode for Spectrum2/3
  mlxsw: spectrum_router_xm: Introduce basic XM cache flushing
  mlxsw: reg: Add Router LPM Cache Enable Register
  mlxsw: reg: Add Router LPM Cache ML Delete Register
  mlxsw: spectrum_router_xm: Implement L-value tracking for M-index
  mlxsw: reg: Add XM Router M Table Register
  ...
2020-12-15 13:22:29 -08:00
Muchun Song da3ceeff92 mm: memcg/slab: rename *_lruvec_slab_state to *_lruvec_kmem_state
The *_lruvec_slab_state is also suitable for pages allocated from buddy,
not just for the slab objects.  But the function name seems to tell us
that only slab object is applicable.  So we can rename the keyword of slab
to kmem.

Link: https://lkml.kernel.org/r/20201117085249.24319-1-songmuchun@bytedance.com
Signed-off-by: Muchun Song <songmuchun@bytedance.com>
Acked-by: Roman Gushchin <guro@fb.com>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-12-15 12:13:40 -08:00
Roman Gushchin bcfe06bf26 mm: memcontrol: Use helpers to read page's memcg data
Patch series "mm: allow mapping accounted kernel pages to userspace", v6.

Currently a non-slab kernel page which has been charged to a memory cgroup
can't be mapped to userspace.  The underlying reason is simple: PageKmemcg
flag is defined as a page type (like buddy, offline, etc), so it takes a
bit from a page->mapped counter.  Pages with a type set can't be mapped to
userspace.

But in general the kmemcg flag has nothing to do with mapping to
userspace.  It only means that the page has been accounted by the page
allocator, so it has to be properly uncharged on release.

Some bpf maps are mapping the vmalloc-based memory to userspace, and their
memory can't be accounted because of this implementation detail.

This patchset removes this limitation by moving the PageKmemcg flag into
one of the free bits of the page->mem_cgroup pointer.  Also it formalizes
accesses to the page->mem_cgroup and page->obj_cgroups using new helpers,
adds several checks and removes a couple of obsolete functions.  As the
result the code became more robust with fewer open-coded bit tricks.

This patch (of 4):

Currently there are many open-coded reads of the page->mem_cgroup pointer,
as well as a couple of read helpers, which are barely used.

It creates an obstacle on a way to reuse some bits of the pointer for
storing additional bits of information.  In fact, we already do this for
slab pages, where the last bit indicates that a pointer has an attached
vector of objcg pointers instead of a regular memcg pointer.

This commits uses 2 existing helpers and introduces a new helper to
converts all read sides to calls of these helpers:
  struct mem_cgroup *page_memcg(struct page *page);
  struct mem_cgroup *page_memcg_rcu(struct page *page);
  struct mem_cgroup *page_memcg_check(struct page *page);

page_memcg_check() is intended to be used in cases when the page can be a
slab page and have a memcg pointer pointing at objcg vector.  It does
check the lowest bit, and if set, returns NULL.  page_memcg() contains a
VM_BUG_ON_PAGE() check for the page not being a slab page.

To make sure nobody uses a direct access, struct page's
mem_cgroup/obj_cgroups is converted to unsigned long memcg_data.

Signed-off-by: Roman Gushchin <guro@fb.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Michal Hocko <mhocko@suse.com>
Link: https://lkml.kernel.org/r/20201027001657.3398190-1-guro@fb.com
Link: https://lkml.kernel.org/r/20201027001657.3398190-2-guro@fb.com
Link: https://lore.kernel.org/bpf/20201201215900.3569844-2-guro@fb.com
2020-12-02 18:28:05 -08:00
Linus Torvalds c4d6fe7311 XArray updates for 5.9
- Fix the test suite after introduction of the local_lock
  - Fix a bug in the IDA spotted by Coverity
  - Change the API that allows the workingset code to delete a node
  - Fix xas_reload() when dealing with entries that occupy multiple indices
  - Add a few more tests to the test suite
  - Fix an unsigned int being shifted into an unsigned long
 -----BEGIN PGP SIGNATURE-----
 
 iQEzBAABCgAdFiEEejHryeLBw/spnjHrDpNsjXcpgj4FAl+OzzAACgkQDpNsjXcp
 gj5YFgf/cV99dyPaal7AfMwhVwFcuVjIRH4S/VeOHkjS2QT1lpu3ffqfKALVR8vU
 3IObM3oDCmLk0mYz9O+V/udVJoBYWiduI0LZhR6+V5ZrDjbw/d4VdCbwOplpeF5x
 rntyI9r8f5d4LxBJ/moLjsosc1KfCzyVnV389eZRvZ8Muxuyc73WdAwZZZfD79nY
 66gScEXQokU99zqJJ1nWfh05XTcTsKF25fVBGMLZTUBAytoFyPuC/kO2z8Uq9lEi
 Ug6gDClskSB7A2W5gvprMcoUAVYcHfTb0wqJD5/MhkHyoTdcWdW8Re0kssXvD86V
 KwlBdYQ/JuskgY/hbynZ/FP3p8+t1Q==
 =12E/
 -----END PGP SIGNATURE-----

Merge tag 'xarray-5.9' of git://git.infradead.org/users/willy/xarray

Pull XArray updates from Matthew Wilcox:

 - Fix the test suite after introduction of the local_lock

 - Fix a bug in the IDA spotted by Coverity

 - Change the API that allows the workingset code to delete a node

 - Fix xas_reload() when dealing with entries that occupy multiple
   indices

 - Add a few more tests to the test suite

 - Fix an unsigned int being shifted into an unsigned long

* tag 'xarray-5.9' of git://git.infradead.org/users/willy/xarray:
  XArray: Fix xas_create_range for ranges above 4 billion
  radix-tree: fix the comment of radix_tree_next_slot()
  XArray: Fix xas_reload for multi-index entries
  XArray: Add private interface for workingset node deletion
  XArray: Fix xas_for_each_conflict documentation
  XArray: Test marked multiorder iterations
  XArray: Test two more things about xa_cmpxchg
  ida: Free allocated bitmap in error path
  radix tree test suite: Fix compilation
2020-10-20 14:39:37 -07:00
Xiaofei Tan e755f4af08 mm/workingset.c: fix some doc warnings
Fix following warnings caused by mismatch bewteen function parameters and
comments.

mm/workingset.c:228: warning: Function parameter or member 'lruvec' not described in 'workingset_age_nonresident'
mm/workingset.c:228: warning: Excess function parameter 'memcg' description in 'workingset_age_nonresident'

Signed-off-by: Xiaofei Tan <tanxiaofei@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Link: https://lkml.kernel.org/r/1600485913-11192-1-git-send-email-tanxiaofei@huawei.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-10-16 11:11:19 -07:00
Matthew Wilcox (Oracle) f82cd2f0b5 XArray: Add private interface for workingset node deletion
Move the tricky bits of dealing with the XArray from the workingset
code to the XArray.  Make it clear in the documentation that this is a
private interface, and only export it for the benefit of the test suite.

Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
2020-10-13 08:41:26 -04:00
Matthew Wilcox (Oracle) 6c357848b4 mm: replace hpage_nr_pages with thp_nr_pages
The thp prefix is more frequently used than hpage and we should be
consistent between the various functions.

[akpm@linux-foundation.org: fix mm/migrate.c]

Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: William Kucharski <william.kucharski@oracle.com>
Reviewed-by: Zi Yan <ziy@nvidia.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Link: http://lkml.kernel.org/r/20200629151959.15779-6-willy@infradead.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-08-14 19:56:56 -07:00
Joonsoo Kim aae466b005 mm/swap: implement workingset detection for anonymous LRU
This patch implements workingset detection for anonymous LRU.  All the
infrastructure is implemented by the previous patches so this patch just
activates the workingset detection by installing/retrieving the shadow
entry and adding refault calculation.

Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Hugh Dickins <hughd@google.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Minchan Kim <minchan@kernel.org>
Link: http://lkml.kernel.org/r/1595490560-15117-6-git-send-email-iamjoonsoo.kim@lge.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-08-12 10:57:56 -07:00
Joonsoo Kim 170b04b7ae mm/workingset: prepare the workingset detection infrastructure for anon LRU
To prepare the workingset detection for anon LRU, this patch splits
workingset event counters for refault, activate and restore into anon and
file variants, as well as the refaults counter in struct lruvec.

Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Hugh Dickins <hughd@google.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Minchan Kim <minchan@kernel.org>
Link: http://lkml.kernel.org/r/1595490560-15117-4-git-send-email-iamjoonsoo.kim@lge.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-08-12 10:57:55 -07:00
Roman Gushchin d42f3245c7 mm: memcg: convert vmstat slab counters to bytes
In order to prepare for per-object slab memory accounting, convert
NR_SLAB_RECLAIMABLE and NR_SLAB_UNRECLAIMABLE vmstat items to bytes.

To make it obvious, rename them to NR_SLAB_RECLAIMABLE_B and
NR_SLAB_UNRECLAIMABLE_B (similar to NR_KERNEL_STACK_KB).

Internally global and per-node counters are stored in pages, however memcg
and lruvec counters are stored in bytes.  This scheme may look weird, but
only for now.  As soon as slab pages will be shared between multiple
cgroups, global and node counters will reflect the total number of slab
pages.  However memcg and lruvec counters will be used for per-memcg slab
memory tracking, which will take separate kernel objects in the account.
Keeping global and node counters in pages helps to avoid additional
overhead.

The size of slab memory shouldn't exceed 4Gb on 32-bit machines, so it
will fit into atomic_long_t we use for vmstats.

Signed-off-by: Roman Gushchin <guro@fb.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Christoph Lameter <cl@linux.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Tejun Heo <tj@kernel.org>
Link: http://lkml.kernel.org/r/20200623174037.3951353-4-guro@fb.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-08-07 11:33:24 -07:00
Johannes Weiner 31d8fcac00 mm: workingset: age nonresident information alongside anonymous pages
Patch series "fix for "mm: balance LRU lists based on relative
thrashing" patchset"

This patchset fixes some problems of the patchset, "mm: balance LRU
lists based on relative thrashing", which is now merged on the mainline.

Patch "mm: workingset: let cache workingset challenge anon fix" is the
result of discussion with Johannes.  See following link.

  http://lkml.kernel.org/r/20200520232525.798933-6-hannes@cmpxchg.org

And, the other two are minor things which are found when I try to rebase
my patchset.

This patch (of 3):

After ("mm: workingset: let cache workingset challenge anon fix"), we
compare refault distances to active_file + anon.  But age of the
non-resident information is only driven by the file LRU.  As a result,
we may overestimate the recency of any incoming refaults and activate
them too eagerly, causing unnecessary LRU churn in certain situations.

Make anon aging drive nonresident age as well to address that.

Link: http://lkml.kernel.org/r/1592288204-27734-1-git-send-email-iamjoonsoo.kim@lge.com
Link: http://lkml.kernel.org/r/1592288204-27734-2-git-send-email-iamjoonsoo.kim@lge.com
Fixes: 34e58cac6d ("mm: workingset: let cache workingset challenge anon")
Reported-by: Joonsoo Kim <js1304@gmail.com>
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Rik van Riel <riel@surriel.com>
Cc: Minchan Kim <minchan.kim@gmail.com>
Cc: Michal Hocko <mhocko@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-26 00:27:37 -07:00
Johannes Weiner 96f8bf4fb1 mm: vmscan: reclaim writepage is IO cost
The VM tries to balance reclaim pressure between anon and file so as to
reduce the amount of IO incurred due to the memory shortage.  It already
counts refaults and swapins, but in addition it should also count
writepage calls during reclaim.

For swap, this is obvious: it's IO that wouldn't have occurred if the
anonymous memory hadn't been under memory pressure.  From a relative
balancing point of view this makes sense as well: even if anon is cold and
reclaimable, a cache that isn't thrashing may have equally cold pages that
don't require IO to reclaim.

For file writeback, it's trickier: some of the reclaim writepage IO would
have likely occurred anyway due to dirty expiration.  But not all of it -
premature writeback reduces batching and generates additional writes.
Since the flushers are already woken up by the time the VM starts writing
cache pages one by one, let's assume that we'e likely causing writes that
wouldn't have happened without memory pressure.  In addition, the per-page
cost of IO would have probably been much cheaper if written in larger
batches from the flusher thread rather than the single-page-writes from
kswapd.

For our purposes - getting the trend right to accelerate convergence on a
stable state that doesn't require paging at all - this is sufficiently
accurate.  If we later wanted to optimize for sustained thrashing, we can
still refine the measurements.

Count all writepage calls from kswapd as IO cost toward the LRU that the
page belongs to.

Why do this dynamically?  Don't we know in advance that anon pages require
IO to reclaim, and so could build in a static bias?

First, scanning is not the same as reclaiming.  If all the anon pages are
referenced, we may not swap for a while just because we're scanning the
anon list.  During this time, however, it's important that we age
anonymous memory and the page cache at the same rate so that their
hot-cold gradients are comparable.  Everything else being equal, we still
want to reclaim the coldest memory overall.

Second, we keep copies in swap unless the page changes.  If there is
swap-backed data that's mostly read (tmpfs file) and has been swapped out
before, we can reclaim it without incurring additional IO.

Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Rik van Riel <riel@surriel.com>
Link: http://lkml.kernel.org/r/20200520232525.798933-14-hannes@cmpxchg.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-03 20:09:49 -07:00
Johannes Weiner 314b57fb04 mm: balance LRU lists based on relative thrashing
Since the LRUs were split into anon and file lists, the VM has been
balancing between page cache and anonymous pages based on per-list ratios
of scanned vs.  rotated pages.  In most cases that tips page reclaim
towards the list that is easier to reclaim and has the fewest actively
used pages, but there are a few problems with it:

1. Refaults and LRU rotations are weighted the same way, even though
   one costs IO and the other costs a bit of CPU.

2. The less we scan an LRU list based on already observed rotations,
   the more we increase the sampling interval for new references, and
   rotations become even more likely on that list. This can enter a
   death spiral in which we stop looking at one list completely until
   the other one is all but annihilated by page reclaim.

Since commit a528910e12 ("mm: thrash detection-based file cache sizing")
we have refault detection for the page cache.  Along with swapin events,
they are good indicators of when the file or anon list, respectively, is
too small for its workingset and needs to grow.

For example, if the page cache is thrashing, the cache pages need more
time in memory, while there may be colder pages on the anonymous list.
Likewise, if swapped pages are faulting back in, it indicates that we
reclaim anonymous pages too aggressively and should back off.

Replace LRU rotations with refaults and swapins as the basis for relative
reclaim cost of the two LRUs.  This will have the VM target list balances
that incur the least amount of IO on aggregate.

Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Rik van Riel <riel@surriel.com>
Link: http://lkml.kernel.org/r/20200520232525.798933-12-hannes@cmpxchg.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-03 20:09:49 -07:00
Johannes Weiner 34e58cac6d mm: workingset: let cache workingset challenge anon
We activate cache refaults with reuse distances in pages smaller than the
size of the total cache.  This allows new pages with competitive access
frequencies to establish themselves, as well as challenge and potentially
displace pages on the active list that have gone cold.

However, that assumes that active cache can only replace other active
cache in a competition for the hottest memory.  This is not a great
default assumption.  The page cache might be thrashing while there are
enough completely cold and unused anonymous pages sitting around that we'd
only have to write to swap once to stop all IO from the cache.

Activate cache refaults when their reuse distance in pages is smaller than
the total userspace workingset, including anonymous pages.

Reclaim can still decide how to balance pressure among the two LRUs
depending on the IO situation.  Rotational drives will prefer avoiding
random IO from swap and go harder after cache.  But fundamentally, hot
cache should be able to compete with anon pages for a place in RAM.

Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Rik van Riel <riel@surriel.com>
Link: http://lkml.kernel.org/r/20200520232525.798933-6-hannes@cmpxchg.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-03 20:09:48 -07:00
Johannes Weiner b910718a94 mm: vmscan: detect file thrashing at the reclaim root
We use refault information to determine whether the cache workingset is
stable or transitioning, and dynamically adjust the inactive:active file
LRU ratio so as to maximize protection from one-off cache during stable
periods, and minimize IO during transitions.

With cgroups and their nested LRU lists, we currently don't do this
correctly.  While recursive cgroup reclaim establishes a relative LRU
order among the pages of all involved cgroups, refaults only affect the
local LRU order in the cgroup in which they are occuring.  As a result,
cache transitions can take longer in a cgrouped system as the active pages
of sibling cgroups aren't challenged when they should be.

[ Right now, this is somewhat theoretical, because the siblings, under
  continued regular reclaim pressure, should eventually run out of
  inactive pages - and since inactive:active *size* balancing is also
  done on a cgroup-local level, we will challenge the active pages
  eventually in most cases. But the next patch will move that relative
  size enforcement to the reclaim root as well, and then this patch
  here will be necessary to propagate refault pressure to siblings. ]

This patch moves refault detection to the root of reclaim.  Instead of
remembering the cgroup owner of an evicted page, remember the cgroup that
caused the reclaim to happen.  When refaults later occur, they'll
correctly influence the cross-cgroup LRU order that reclaim follows.

I.e.  if global reclaim kicked out pages in some subgroup A/B/C, the
refault of those pages will challenge the global LRU order, and not just
the local order down inside C.

[hannes@cmpxchg.org:  use page_memcg() instead of another lookup]
  Link: http://lkml.kernel.org/r/20191115160722.GA309754@cmpxchg.org
Link: http://lkml.kernel.org/r/20191107205334.158354-3-hannes@cmpxchg.org
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: Suren Baghdasaryan <surenb@google.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Rik van Riel <riel@surriel.com>
Cc: Shakeel Butt <shakeelb@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-12-01 12:59:07 -08:00
Johannes Weiner 867e5e1de1 mm: clean up and clarify lruvec lookup procedure
There is a per-memcg lruvec and a NUMA node lruvec.  Which one is being
used is somewhat confusing right now, and it's easy to make mistakes -
especially when it comes to global reclaim.

How it works: when memory cgroups are enabled, we always use the
root_mem_cgroup's per-node lruvecs.  When memory cgroups are not compiled
in or disabled at runtime, we use pgdat->lruvec.

Document that in a comment.

Due to the way the reclaim code is generalized, all lookups use the
mem_cgroup_lruvec() helper function, and nobody should have to find the
right lruvec manually right now.  But to avoid future mistakes, rename the
pgdat->lruvec member to pgdat->__lruvec and delete the convenience wrapper
that suggests it's a commonly accessed member.

While in this area, swap the mem_cgroup_lruvec() argument order.  The name
suggests a memcg operation, yet it takes a pgdat first and a memcg second.
I have to double take every time I call this.  Fix that.

Link: http://lkml.kernel.org/r/20191022144803.302233-3-hannes@cmpxchg.org
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Michal Hocko <mhocko@suse.com>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Cc: Roman Gushchin <guro@fb.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-12-01 12:59:06 -08:00
Roman Gushchin ec9f02384f mm: workingset: fix vmstat counters for shadow nodes
Memcg counters for shadow nodes are broken because the memcg pointer is
obtained in a wrong way. The following approach is used:
        virt_to_page(xa_node)->mem_cgroup

Since commit 4d96ba3530 ("mm: memcg/slab: stop setting
page->mem_cgroup pointer for slab pages") page->mem_cgroup pointer isn't
set for slab pages, so memcg_from_slab_page() should be used instead.

Also I doubt that it ever worked correctly: virt_to_head_page() should
be used instead of virt_to_page().  Otherwise objects residing on tail
pages are not accounted, because only the head page contains a valid
mem_cgroup pointer.  That was a case since the introduction of these
counters by the commit 68d48e6a2d ("mm: workingset: add vmstat counter
for shadow nodes").

Link: http://lkml.kernel.org/r/20190801233532.138743-1-guro@fb.com
Fixes: 4d96ba3530 ("mm: memcg/slab: stop setting page->mem_cgroup pointer for slab pages")
Signed-off-by: Roman Gushchin <guro@fb.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Michal Hocko <mhocko@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-08-13 16:06:52 -07:00
Johannes Weiner 205b20cc5a mm: memcontrol: make cgroup stats and events query API explicitly local
Patch series "mm: memcontrol: memory.stat cost & correctness".

The cgroup memory.stat file holds recursive statistics for the entire
subtree.  The current implementation does this tree walk on-demand
whenever the file is read.  This is giving us problems in production.

1. The cost of aggregating the statistics on-demand is high.  A lot of
   system service cgroups are mostly idle and their stats don't change
   between reads, yet we always have to check them.  There are also always
   some lazily-dying cgroups sitting around that are pinned by a handful
   of remaining page cache; the same applies to them.

   In an application that periodically monitors memory.stat in our
   fleet, we have seen the aggregation consume up to 5% CPU time.

2. When cgroups die and disappear from the cgroup tree, so do their
   accumulated vm events.  The result is that the event counters at
   higher-level cgroups can go backwards and confuse some of our
   automation, let alone people looking at the graphs over time.

To address both issues, this patch series changes the stat
implementation to spill counts upwards when the counters change.

The upward spilling is batched using the existing per-cpu cache.  In a
sparse file stress test with 5 level cgroup nesting, the additional cost
of the flushing was negligible (a little under 1% of CPU at 100% CPU
utilization, compared to the 5% of reading memory.stat during regular
operation).

This patch (of 4):

memcg_page_state(), lruvec_page_state(), memcg_sum_events() are
currently returning the state of the local memcg or lruvec, not the
recursive state.

In practice there is a demand for both versions, although the callers
that want the recursive counts currently sum them up by hand.

Per default, cgroups are considered recursive entities and generally we
expect more users of the recursive counters, with the local counts being
special cases.  To reflect that in the name, add a _local suffix to the
current implementations.

The following patch will re-incarnate these functions with recursive
semantics, but with an O(1) implementation.

[hannes@cmpxchg.org: fix bisection hole]
  Link: http://lkml.kernel.org/r/20190417160347.GC23013@cmpxchg.org
Link: http://lkml.kernel.org/r/20190412151507.2769-2-hannes@cmpxchg.org
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Reviewed-by: Roman Gushchin <guro@fb.com>
Cc: Michal Hocko <mhocko@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-05-14 19:52:53 -07:00
Johannes Weiner 2b487e59f0 mm: memcontrol: push down mem_cgroup_node_nr_lru_pages()
mem_cgroup_node_nr_lru_pages() is just a convenience wrapper around
lruvec_page_state() that takes bitmasks of lru indexes and aggregates the
counts for those.

Replace callsites where the bitmask is simple enough with direct
lruvec_page_state() calls.

This removes the last extern user of mem_cgroup_node_nr_lru_pages(), so
make that function private again, too.

Link: http://lkml.kernel.org/r/20190228163020.24100-5-hannes@cmpxchg.org
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: Roman Gushchin <guro@fb.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-05-14 09:47:46 -07:00
Andrey Ryabinin a7ca12f9d9 mm/workingset: remove unused @mapping argument in workingset_eviction()
workingset_eviction() doesn't use and never did use the @mapping
argument.  Remove it.

Link: http://lkml.kernel.org/r/20190228083329.31892-1-aryabinin@virtuozzo.com
Signed-off-by: Andrey Ryabinin <aryabinin@virtuozzo.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Rik van Riel <riel@surriel.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Mel Gorman <mgorman@techsingularity.net>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: William Kucharski <william.kucharski@oracle.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-05 21:07:21 -08:00