[ Upstream commit 202e14222f ]
Given the difficulty of auditing all of userspace to figure out whether
every memfd_create() user has switched to passing MFD_EXEC and
MFD_NOEXEC_SEAL flags, it seems far less distruptive to make it possible
for older programs that don't make use of executable memfds to run under
vm.memfd_noexec=2. Otherwise, a small dependency change can result in
spurious errors. For programs that don't use executable memfds, passing
MFD_NOEXEC_SEAL is functionally a no-op and thus having the same
In addition, every failure under vm.memfd_noexec=2 needs to print to the
kernel log so that userspace can figure out where the error came from.
The concerns about pr_warn_ratelimited() spam that caused the switch to
pr_warn_once()[1,2] do not apply to the vm.memfd_noexec=2 case.
This is a user-visible API change, but as it allows programs to do
something that would be blocked before, and the sysctl itself was broken
and recently released, it seems unlikely this will cause any issues.
[1]: https://lore.kernel.org/Y5yS8wCnuYGLHMj4@x1n/
[2]: https://lore.kernel.org/202212161233.85C9783FB@keescook/
Link: https://lkml.kernel.org/r/20230814-memfd-vm-noexec-uapi-fixes-v2-2-7ff9e3e10ba6@cyphar.com
Fixes: 105ff5339f ("mm/memfd: add MFD_NOEXEC_SEAL and MFD_EXEC")
Signed-off-by: Aleksa Sarai <cyphar@cyphar.com>
Cc: Dominique Martinet <asmadeus@codewreck.org>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Daniel Verkamp <dverkamp@chromium.org>
Cc: Jeff Xu <jeffxu@google.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Shuah Khan <shuah@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit cbc0285433 upstream.
It is possible for xa_load() to observe a sibling entry pointing to
another sibling entry. An example:
Thread A: Thread B:
xa_store_range(xa, entry, 188, 191, gfp);
xa_load(xa, 191);
entry = xa_entry(xa, node, 63);
[entry is a sibling of 188]
xa_store_range(xa, entry, 184, 191, gfp);
if (xa_is_sibling(entry))
offset = xa_to_sibling(entry);
entry = xa_entry(xas->xa, node, offset);
[entry is now a sibling of 184]
It is sufficient to go around this loop until we hit a non-sibling entry.
Sibling entries always point earlier in the node, so we are guaranteed
to terminate this search.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Fixes: 6b24ca4a1a ("mm: Use multi-index entries in the page cache")
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 99f34659e7 ]
Patch series "memfd: cleanups for vm.memfd_noexec", v2.
The most critical issue with vm.memfd_noexec=2 (the fact that passing
MFD_EXEC would bypass it entirely[1]) has been fixed in Andrew's
tree[2], but there are still some outstanding issues that need to be
addressed:
* vm.memfd_noexec=2 shouldn't reject old-style memfd_create(2) syscalls
because it will make it far to difficult to ever migrate. Instead it
should imply MFD_EXEC.
* The dmesg warnings are pr_warn_once(), which on most systems means
that they will be used up by systemd or some other boot process and
userspace developers will never see it.
- For the !(flags & (MFD_EXEC | MFD_NOEXEC_SEAL)) case, outputting a
rate-limited message to the kernel log is necessary to tell
userspace that they should add the new flags.
Arguably the most ideal way to deal with the spam concern[3,4]
while still prompting userspace to switch to the new flags would be
to only log the warning once per task or something similar.
However, adding something to task_struct for tracking this would be
needless bloat for a single pr_warn_ratelimited().
So just switch to pr_info_ratelimited() to avoid spamming the log
with something that isn't a real warning. There's lots of
info-level stuff in dmesg, it seems really unlikely that this
should be an actual problem. Most programs are already switching to
the new flags anyway.
- For the vm.memfd_noexec=2 case, we need to log a warning for every
failure because otherwise userspace will have no idea why their
previously working program started returning -EACCES (previously
-EINVAL) from memfd_create(2). pr_warn_once() is simply wrong here.
* The racheting mechanism for vm.memfd_noexec makes it incredibly
unappealing for most users to enable the sysctl because enabling it
on &init_pid_ns means you need a system reboot to unset it. Given the
actual security threat being protected against, CAP_SYS_ADMIN users
being restricted in this way makes little sense.
The argument for this ratcheting by the original author was that it
allows you to have a hierarchical setting that cannot be unset by
child pidnses, but this is not accurate -- changing the parent
pidns's vm.memfd_noexec setting to be more restrictive didn't affect
children.
Instead, switch the vm.memfd_noexec sysctl to be properly
hierarchical and allow CAP_SYS_ADMIN users (in the pidns's owning
userns) to lower the setting as long as it is not lower than the
parent's effective setting. This change also makes it so that
changing a parent pidns's vm.memfd_noexec will affect all
descendants, providing a properly hierarchical setting. The
performance impact of this is incredibly minimal since the maximum
depth of pidns is 32 and it is only checked during memfd_create(2)
and unshare(CLONE_NEWPID).
* The memfd selftests would not exit with a non-zero error code when
certain tests that ran in a forked process (specifically the ones
related to MFD_EXEC and MFD_NOEXEC_SEAL) failed.
[1]: https://lore.kernel.org/all/ZJwcsU0vI-nzgOB_@codewreck.org/
[2]: https://lore.kernel.org/all/20230705063315.3680666-1-jeffxu@google.com/
[3]: https://lore.kernel.org/Y5yS8wCnuYGLHMj4@x1n/
[4]: https://lore.kernel.org/f185bb42-b29c-977e-312e-3349eea15383@linuxfoundation.org/
This patch (of 5):
Before this change, a test runner using this self test would see a return
code of 0 when the tests using a child process (namely the MFD_NOEXEC_SEAL
and MFD_EXEC tests) failed, masking test failures.
Link: https://lkml.kernel.org/r/20230814-memfd-vm-noexec-uapi-fixes-v2-0-7ff9e3e10ba6@cyphar.com
Link: https://lkml.kernel.org/r/20230814-memfd-vm-noexec-uapi-fixes-v2-1-7ff9e3e10ba6@cyphar.com
Fixes: 11f75a0144 ("selftests/memfd: add tests for MFD_NOEXEC_SEAL MFD_EXEC")
Signed-off-by: Aleksa Sarai <cyphar@cyphar.com>
Reviewed-by: Jeff Xu <jeffxu@google.com>
Cc: "Christian Brauner (Microsoft)" <brauner@kernel.org>
Cc: Daniel Verkamp <dverkamp@chromium.org>
Cc: Dominique Martinet <asmadeus@codewreck.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 83a89c4b6a ]
Running the bench_rename test script, the following error occurs:
# ./benchs/run_bench_rename.sh
base : 0.819 ± 0.012M/s
kprobe : 0.538 ± 0.009M/s
kretprobe : 0.503 ± 0.004M/s
rawtp : 0.779 ± 0.020M/s
fentry : 0.726 ± 0.007M/s
fexit : 0.691 ± 0.007M/s
benchmark 'rename-fmodret' not found
The bench_rename_fmodret has been removed in commit b000def2e0
("selftests: Remove fmod_ret from test_overhead"), thus remove it
from the runners in the test script.
Fixes: b000def2e0 ("selftests: Remove fmod_ret from test_overhead")
Signed-off-by: Yipeng Zou <zouyipeng@huawei.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20230814030727.3010390-1-zouyipeng@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 811915db67 ]
There is no way where topts.repeat can be set to 1 when tc_test fails.
Fix the typo where the break statement slipped by one line.
Fixes: fb66223a24 ("selftests/bpf: add test for accessing ctx from syscall program type")
Signed-off-by: Yipeng Zou <zouyipeng@huawei.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Li Zetao <lizetao1@huawei.com>
Link: https://lore.kernel.org/bpf/20230814031434.3077944-1-zouyipeng@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 416c6d0124 ]
commit bdeeed3498 ("libbpf: fix offsetof() and container_of() to work with CO-RE")
...was backported to stable trees such as 5.15. The problem is that with older
LLVM/clang (14/15) - which is often used for older kernels - we see compilation
failures in BPF selftests now:
In file included from progs/test_cls_redirect_subprogs.c:2:
progs/test_cls_redirect.c:90:2: error: static assertion expression is not an integral constant expression
sizeof(flow_ports_t) !=
^~~~~~~~~~~~~~~~~~~~~~~
progs/test_cls_redirect.c:91:3: note: cast that performs the conversions of a reinterpret_cast is not allowed in a constant expression
offsetofend(struct bpf_sock_tuple, ipv4.dport) -
^
progs/test_cls_redirect.c:32:3: note: expanded from macro 'offsetofend'
(offsetof(TYPE, MEMBER) + sizeof((((TYPE *)0)->MEMBER)))
^
tools/testing/selftests/bpf/tools/include/bpf/bpf_helpers.h:86:33: note: expanded from macro 'offsetof'
^
In file included from progs/test_cls_redirect_subprogs.c:2:
progs/test_cls_redirect.c:95:2: error: static assertion expression is not an integral constant expression
sizeof(flow_ports_t) !=
^~~~~~~~~~~~~~~~~~~~~~~
progs/test_cls_redirect.c:96:3: note: cast that performs the conversions of a reinterpret_cast is not allowed in a constant expression
offsetofend(struct bpf_sock_tuple, ipv6.dport) -
^
progs/test_cls_redirect.c:32:3: note: expanded from macro 'offsetofend'
(offsetof(TYPE, MEMBER) + sizeof((((TYPE *)0)->MEMBER)))
^
tools/testing/selftests/bpf/tools/include/bpf/bpf_helpers.h:86:33: note: expanded from macro 'offsetof'
^
2 errors generated.
make: *** [Makefile:594: tools/testing/selftests/bpf/test_cls_redirect_subprogs.bpf.o] Error 1
The problem is the new offsetof() does not play nice with static asserts.
Given that the context is a static assert (and CO-RE relocation is not
needed at compile time), offsetof() usage can be replaced by restoring
the original offsetof() definition as __builtin_offsetof().
Fixes: bdeeed3498 ("libbpf: fix offsetof() and container_of() to work with CO-RE")
Reported-by: Colm Harrington <colm.harrington@oracle.com>
Signed-off-by: Alan Maguire <alan.maguire@oracle.com>
Tested-by: Yipeng Zou <zouyipeng@huawei.com>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20230802073906.3197480-1-alan.maguire@oracle.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8a0260dbf6 ]
realloc() and reallocarray() can either return NULL or a special
non-NULL pointer, if their size argument is zero. This requires a bit
more care to handle NULL-as-valid-result situation differently from
NULL-as-error case. This has caused real issues before ([0]), and just
recently bit again in production when performing bpf_program__attach_usdt().
This patch fixes 4 places that do or potentially could suffer from this
mishandling of NULL, including the reported USDT-related one.
There are many other places where realloc()/reallocarray() is used and
NULL is always treated as an error value, but all those have guarantees
that their size is always non-zero, so those spot don't need any extra
handling.
[0] d08ab82f59 ("libbpf: Fix double-free when linker processes empty sections")
Fixes: 999783c8bb ("libbpf: Wire up spec management and other arch-independent USDT logic")
Fixes: b63b3c490e ("libbpf: Add bpf_program__set_insns function")
Fixes: 697f104db8 ("libbpf: Support custom SEC() handlers")
Fixes: b126882672 ("libbpf: Change the order of data and text relocations.")
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20230711024150.1566433-1-andrii@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 658ac06801 ]
Fix the following error when building bpftool:
CLANG profiler.bpf.o
CLANG pid_iter.bpf.o
skeleton/profiler.bpf.c:18:21: error: invalid application of 'sizeof' to an incomplete type 'struct bpf_perf_event_value'
__uint(value_size, sizeof(struct bpf_perf_event_value));
^ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
tools/bpf/bpftool/bootstrap/libbpf/include/bpf/bpf_helpers.h:13:39: note: expanded from macro '__uint'
tools/bpf/bpftool/bootstrap/libbpf/include/bpf/bpf_helper_defs.h:7:8: note: forward declaration of 'struct bpf_perf_event_value'
struct bpf_perf_event_value;
^
struct bpf_perf_event_value is being used in the kernel only when
CONFIG_BPF_EVENTS is enabled, so it misses a BTF entry then.
Define struct bpf_perf_event_value___local with the
`preserve_access_index` attribute inside the pid_iter BPF prog to
allow compiling on any configs. It is a full mirror of a UAPI
structure, so is compatible both with and w/o CO-RE.
bpf_perf_event_read_value() requires a pointer of the original type,
so a cast is needed.
Fixes: 47c09d6a9f ("bpftool: Introduce "prog profile" command")
Suggested-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexander Lobakin <alobakin@pm.me>
Signed-off-by: Quentin Monnet <quentin@isovalent.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20230707095425.168126-5-quentin@isovalent.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 44ba7b30e8 ]
In order to allow the BPF program in bpftool's pid_iter.bpf.c to compile
correctly on hosts where vmlinux.h does not define
BPF_LINK_TYPE_PERF_EVENT (running kernel versions lower than 5.15, for
example), define and use a local copy of the enum value. This requires
LLVM 12 or newer to build the BPF program.
Fixes: cbdaf71f7e ("bpftool: Add bpf_cookie to link output")
Signed-off-by: Quentin Monnet <quentin@isovalent.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20230707095425.168126-4-quentin@isovalent.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 67a43462ee ]
When building bpftool with !CONFIG_PERF_EVENTS:
skeleton/pid_iter.bpf.c:47:14: error: incomplete definition of type 'struct bpf_perf_link'
perf_link = container_of(link, struct bpf_perf_link, link);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
tools/bpf/bpftool/bootstrap/libbpf/include/bpf/bpf_helpers.h:74:22: note: expanded from macro 'container_of'
((type *)(__mptr - offsetof(type, member))); \
^~~~~~~~~~~~~~~~~~~~~~
tools/bpf/bpftool/bootstrap/libbpf/include/bpf/bpf_helpers.h:68:60: note: expanded from macro 'offsetof'
#define offsetof(TYPE, MEMBER) ((unsigned long)&((TYPE *)0)->MEMBER)
~~~~~~~~~~~^
skeleton/pid_iter.bpf.c:44:9: note: forward declaration of 'struct bpf_perf_link'
struct bpf_perf_link *perf_link;
^
&bpf_perf_link is being defined and used only under the ifdef.
Define struct bpf_perf_link___local with the `preserve_access_index`
attribute inside the pid_iter BPF prog to allow compiling on any
configs. CO-RE will substitute it with the real struct bpf_perf_link
accesses later on.
container_of() uses offsetof(), which does the necessary CO-RE
relocation if the field is specified with `preserve_access_index` - as
is the case for struct bpf_perf_link___local.
Fixes: cbdaf71f7e ("bpftool: Add bpf_cookie to link output")
Suggested-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexander Lobakin <alobakin@pm.me>
Signed-off-by: Quentin Monnet <quentin@isovalent.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20230707095425.168126-3-quentin@isovalent.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4cbeeb0dc0 ]
When CONFIG_PERF_EVENTS is not set, struct perf_event remains empty.
However, the structure is being used by bpftool indirectly via BTF.
This leads to:
skeleton/pid_iter.bpf.c:49:30: error: no member named 'bpf_cookie' in 'struct perf_event'
return BPF_CORE_READ(event, bpf_cookie);
~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~
...
skeleton/pid_iter.bpf.c:49:9: error: returning 'void' from a function with incompatible result type '__u64' (aka 'unsigned long long')
return BPF_CORE_READ(event, bpf_cookie);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Tools and samples can't use any CONFIG_ definitions, so the fields
used there should always be present.
Define struct perf_event___local with the `preserve_access_index`
attribute inside the pid_iter BPF prog to allow compiling on any
configs. CO-RE will substitute it with the real struct perf_event
accesses later on.
Fixes: cbdaf71f7e ("bpftool: Add bpf_cookie to link output")
Suggested-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexander Lobakin <alobakin@pm.me>
Signed-off-by: Quentin Monnet <quentin@isovalent.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20230707095425.168126-2-quentin@isovalent.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c628747cc8 ]
Don't reset recorded sec_def handler unconditionally on
bpf_program__set_type(). There are two situations where this is wrong.
First, if the program type didn't actually change. In that case original
SEC handler should work just fine.
Second, catch-all custom SEC handler is supposed to work with any BPF
program type and SEC() annotation, so it also doesn't make sense to
reset that.
This patch fixes both issues. This was reported recently in the context
of breaking perf tool, which uses custom catch-all handler for fancy BPF
prologue generation logic. This patch should fix the issue.
[0] https://lore.kernel.org/linux-perf-users/ab865e6d-06c5-078e-e404-7f90686db50d@amd.com/
Fixes: d6e6286a12 ("libbpf: disassociate section handler on explicit bpf_program__set_type() call")
Reported-by: Ravi Bangoria <ravi.bangoria@amd.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Stanislav Fomichev <sdf@google.com>
Link: https://lore.kernel.org/r/20230707231156.1711948-1-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 17e8e5d6e0 ]
Alexei reported:
After fast forwarding bpf-next today bpf_nf test started to fail when
run twice:
$ ./test_progs -t bpf_nf
#17 bpf_nf:OK
Summary: 1/10 PASSED, 0 SKIPPED, 0 FAILED
$ ./test_progs -t bpf_nf
All error logs:
test_bpf_nf_ct:PASS:test_bpf_nf__open_and_load 0 nsec
test_bpf_nf_ct:PASS:iptables-legacy -t raw -A PREROUTING -j CONNMARK
--set-mark 42/0 0 nsec
(network_helpers.c:102: errno: Address already in use) Failed to bind socket
test_bpf_nf_ct:FAIL:start_server unexpected start_server: actual -1 < expected 0
#17/1 bpf_nf/xdp-ct:FAIL
test_bpf_nf_ct:PASS:test_bpf_nf__open_and_load 0 nsec
test_bpf_nf_ct:PASS:iptables-legacy -t raw -A PREROUTING -j CONNMARK
--set-mark 42/0 0 nsec
(network_helpers.c:102: errno: Address already in use) Failed to bind socket
test_bpf_nf_ct:FAIL:start_server unexpected start_server: actual -1 < expected 0
#17/2 bpf_nf/tc-bpf-ct:FAIL
#17 bpf_nf:FAIL
Summary: 0/8 PASSED, 0 SKIPPED, 1 FAILED
I was able to locally reproduce as well. Rearrange the connection teardown
so that the client closes its connection first so that we don't need to
linger in TCP time-wait.
Fixes: e81fbd4c1b ("selftests/bpf: Add existing connection bpf_*_ct_lookup() test")
Reported-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/CAADnVQ+0dnDq_v_vH1EfkacbfGnHANaon7zsw10pMb-D9FS0Pw@mail.gmail.com
Link: https://lore.kernel.org/bpf/20230626131942.5100-1-daniel@iogearbox.net
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fbf4dec702 ]
Observed occassional failures in the futex_wait_timeout test:
ok 1 futex_wait relative succeeds
ok 2 futex_wait_bitset realtime succeeds
ok 3 futex_wait_bitset monotonic succeeds
ok 4 futex_wait_requeue_pi realtime succeeds
ok 5 futex_wait_requeue_pi monotonic succeeds
not ok 6 futex_lock_pi realtime returned 0
......
The test expects the child thread to complete some steps before
the parent thread gets to run. There is an implicit expectation
of the order of invocation of futex_lock_pi between the child thread
and the parent thread. Make this order explicit. If the order is
not met, the futex_lock_pi call in the parent thread succeeds and
will not timeout.
Fixes: f4addd54b1 ("selftests: futex: Expand timeout test")
Signed-off-by: Nysal Jan K.A <nysal@linux.ibm.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 51a0c3b7f0 ]
Perf event fd (fd_lm) is not closed when run_fill_buf() returns error.
Close fd_lm only in cat_val() to make it easier to track it is always
closed.
Fixes: 790bf585b0 ("selftests/resctrl: Add Cache Allocation Technology (CAT) selftest")
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Tested-by: Shaopeng Tan (Fujitsu) <tan.shaopeng@fujitsu.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f99e413eb5 ]
A child calls PARENT_EXIT() when it fails to run a benchmark to kill
the parent process. PARENT_EXIT() lacks unmount for the resctrl FS and
the parent won't be there to unmount it either after it gets killed.
Add the resctrl FS unmount also to PARENT_EXIT().
Fixes: 591a6e8588 ("selftests/resctrl: Add basic resctrl file system operations and data")
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Tested-by: Shaopeng Tan (Fujitsu) <tan.shaopeng@fujitsu.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2d320b1029 ]
The error path in fill_cache() does return before the allocated buffer
is freed leaking the buffer.
The leak was introduced when fill_cache_read() started to return errors
in commit c7b607fa93 ("selftests/resctrl: Fix null pointer
dereference on open failed"), before that both fill functions always
returned 0.
Move free() earlier to prevent the mem leak.
Fixes: c7b607fa93 ("selftests/resctrl: Fix null pointer dereference on open failed")
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Tested-by: Shaopeng Tan (Fujitsu) <tan.shaopeng@fujitsu.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b3d46e11fe ]
Tests that were expecting a signal were not correctly checking for a
SKIP condition. Move the check before the signal checking when
processing test result.
Cc: Shuah Khan <shuah@kernel.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Will Drewry <wad@chromium.org>
Cc: linux-kselftest@vger.kernel.org
Fixes: 9847d24af9 ("selftests/harness: Refactor XFAIL into SKIP")
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ed0cf84e9c ]
It is incorrect in python to compare integer values using the "is" keyword.
The "is" keyword in python is used to compare references to two objects,
not their values. Newer version of python3 (version 3.8) throws a warning
when such incorrect comparison is made. For value comparison, "==" should
be used.
Fix this in the code and suppress the following warning:
/usr/sbin/vmbus_testing:167: SyntaxWarning: "is" with a literal. Did you mean "=="?
Signed-off-by: Ani Sinha <anisinha@redhat.com>
Link: https://lore.kernel.org/r/20230705134408.6302-1-anisinha@redhat.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 1738b94962 upstream.
After commit 2c2241081f ("mm/gup: move private gup FOLL_ flags to
internal.h") FOLL_LONGTERM flag value got updated from 0x10000 to 0x100 at
include/linux/mm_types.h.
As hmm.hmm_device_private.hmm_gup_test uses FOLL_LONGTERM Updating same
here as well.
Before this change test goes in an infinite assert loop in
hmm.hmm_device_private.hmm_gup_test
==========================================================
RUN hmm.hmm_device_private.hmm_gup_test ...
hmm-tests.c:1962:hmm_gup_test:Expected HMM_DMIRROR_PROT_WRITE..
..(2) == m[2] (34)
hmm-tests.c:157:hmm_gup_test:Expected ret (-1) == 0 (0)
hmm-tests.c:157:hmm_gup_test:Expected ret (-1) == 0 (0)
...
==========================================================
Call Trace:
<TASK>
? sched_clock+0xd/0x20
? __lock_acquire.constprop.0+0x120/0x6c0
? ktime_get+0x2c/0xd0
? sched_clock+0xd/0x20
? local_clock+0x12/0xd0
? lock_release+0x26e/0x3b0
pin_user_pages_fast+0x4c/0x70
gup_test_ioctl+0x4ff/0xbb0
? gup_test_ioctl+0x68c/0xbb0
__x64_sys_ioctl+0x99/0xd0
do_syscall_64+0x60/0x90
? syscall_exit_to_user_mode+0x2a/0x50
? do_syscall_64+0x6d/0x90
? syscall_exit_to_user_mode+0x2a/0x50
? do_syscall_64+0x6d/0x90
? irqentry_exit_to_user_mode+0xd/0x20
? irqentry_exit+0x3f/0x50
? exc_page_fault+0x96/0x200
entry_SYSCALL_64_after_hwframe+0x72/0xdc
RIP: 0033:0x7f6aaa31aaff
After this change test is able to pass successfully.
Link: https://lkml.kernel.org/r/20230808124347.79163-1-ayush.jain3@amd.com
Fixes: 2c2241081f ("mm/gup: move private gup FOLL_ flags to internal.h")
Signed-off-by: Ayush Jain <ayush.jain3@amd.com>
Reviewed-by: Raghavendra K T <raghavendra.kt@amd.com>
Reviewed-by: John Hubbard <jhubbard@nvidia.com>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit be80942465 ]
Before adding a port to bond, it need to be set down first. In the
lacpdu test the author set the port down specifically. But commit
a4abfa627c ("net: rtnetlink: Enslave device before bringing it up")
changed the operation order, the kernel will set the port down _after_
adding to bond. So all the ports will be down at last and the test failed.
In fact, the veth interfaces are already inactive when added. This
means there's no need to set them down again before adding to the bond.
Let's just remove the link down operation.
Fixes: a4abfa627c ("net: rtnetlink: Enslave device before bringing it up")
Reported-by: Zhengchao Shao <shaozhengchao@huawei.com>
Closes: https://lore.kernel.org/netdev/a0ef07c7-91b0-94bd-240d-944a330fcabd@huawei.com/
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Link: https://lore.kernel.org/r/20230817082459.1685972-1-liuhangbin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f520489e99 ]
Remove assumptions about shared buffer cell size and instead query the
cell size from devlink. Adjust the test to send small packets that fit
inside a single cell.
Tested on Spectrum-{1,2,3,4}.
Fixes: 4735402173 ("mlxsw: spectrum: Extend to support Spectrum-4 ASIC")
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/f7dfbf3c4d1cb23838d9eb99bab09afaa320c4ca.1692268427.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit c0b067588a upstream.
This reverts commit 46d21ec067.
The tests were made with a specific workload, further tests on a
recently updated fedora 38 system with a system wide perf.data file
shows 'perf report' taking excessive time resolving inlines in vmlinux,
so lets revert this until a full investigation and improvement on the
addr2line support code is made.
Reported-by: Jesper Dangaard Brouer <hawk@kernel.org>
Acked-by: Artem Savkov <asavkov@redhat.com>
Tested-by: Jesper Dangaard Brouer <hawk@kernel.org>
Cc: Andrii Nakryiko <andrii.nakryiko@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Milian Wolff <milian.wolff@kdab.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/ZMl8VyhdwhClTM5g@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 855067defa ]
This test verifies whether the encapsulated packets have the correct
configured TTL. It does so by sending ICMP packets through the test
topology and mirroring them to a gretap netdevice. On a busy host
however, more than just the test ICMP packets may end up flowing
through the topology, get mirrored, and counted. This leads to
potential spurious failures as the test observes much more mirrored
packets than the sent test packets, and assumes a bug.
Fix this by tightening up the mirror action match. Change it from
matchall to a flower classifier matching on ICMP packets specifically.
Fixes: 45315673e0 ("selftests: forwarding: Test changes in mirror-to-gretap")
Signed-off-by: Petr Machata <petrm@nvidia.com>
Tested-by: Mirsad Todorovac <mirsad.todorovac@alu.unizg.hr>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 833fd800bf upstream.
The kprobes optimization check can_optimize() calls
insn_is_indirect_jump() to detect indirect jump instructions in
a target function. If any is found, creating an optprobe is disallowed
in the function because the jump could be from a jump table and could
potentially land in the middle of the target optprobe.
With retpolines, insn_is_indirect_jump() additionally looks for calls to
indirect thunks which the compiler potentially used to replace original
jumps. This extra check is however unnecessary because jump tables are
disabled when the kernel is built with retpolines. The same is currently
the case with IBT.
Based on this observation, remove the logic to look for calls to
indirect thunks and skip the check for indirect jumps altogether if the
kernel is built with retpolines or IBT. Remove subsequently the symbols
__indirect_thunk_start and __indirect_thunk_end which are no longer
needed.
Dropping this logic indirectly fixes a problem where the range
[__indirect_thunk_start, __indirect_thunk_end] wrongly included also the
return thunk. It caused that machines which used the return thunk as
a mitigation and didn't have it patched by any alternative ended up not
being able to use optprobes in any regular function.
Fixes: 0b53c374b9 ("x86/retpoline: Use -mfunction-return")
Suggested-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Suggested-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Petr Pavlu <petr.pavlu@suse.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Link: https://lore.kernel.org/r/20230711091952.27944-3-petr.pavlu@suse.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 79cd2a1122 upstream.
The linker script arch/x86/kernel/vmlinux.lds.S matches the thunk
sections ".text.__x86.*" from arch/x86/lib/retpoline.S as follows:
.text {
[...]
TEXT_TEXT
[...]
__indirect_thunk_start = .;
*(.text.__x86.*)
__indirect_thunk_end = .;
[...]
}
Macro TEXT_TEXT references TEXT_MAIN which normally expands to only
".text". However, with CONFIG_LTO_CLANG, TEXT_MAIN becomes
".text .text.[0-9a-zA-Z_]*" which wrongly matches also the thunk
sections. The output layout is then different than expected. For
instance, the currently defined range [__indirect_thunk_start,
__indirect_thunk_end] becomes empty.
Prevent the problem by using ".." as the first separator, for example,
".text..__x86.indirect_thunk". This pattern is utilized by other
explicit section names which start with one of the standard prefixes,
such as ".text" or ".data", and that need to be individually selected in
the linker script.
[ nathan: Fix conflicts with SRSO and fold in fix issue brought up by
Andrew Cooper in post-review:
https://lore.kernel.org/20230803230323.1478869-1-andrew.cooper3@citrix.com ]
Fixes: dc5723b02e ("kbuild: add support for Clang LTO")
Signed-off-by: Petr Pavlu <petr.pavlu@suse.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20230711091952.27944-2-petr.pavlu@suse.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit dbf4600877 upstream.
For stack-validation of a frame-pointer build, objtool validates that
every CALL instruction is preceded by a frame-setup. The new SRSO
return thunks violate this with their RSB stuffing trickery.
Extend the __fentry__ exception to also cover the embedded_insn case
used for this. This cures:
vmlinux.o: warning: objtool: srso_untrain_ret+0xd: call without frame pointer save/setup
Fixes: 4ae68b26c3 ("objtool/x86: Fix SRSO mess")
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Acked-by: Josh Poimboeuf <jpoimboe@kernel.org>
Link: https://lore.kernel.org/r/20230816115921.GH980931@hirez.programming.kicks-ass.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d43490d0ab upstream.
Use the existing configurable return thunk. There is absolute no
justification for having created this __x86_return_thunk alternative.
To clarify, the whole thing looks like:
Zen3/4 does:
srso_alias_untrain_ret:
nop2
lfence
jmp srso_alias_return_thunk
int3
srso_alias_safe_ret: // aliasses srso_alias_untrain_ret just so
add $8, %rsp
ret
int3
srso_alias_return_thunk:
call srso_alias_safe_ret
ud2
While Zen1/2 does:
srso_untrain_ret:
movabs $foo, %rax
lfence
call srso_safe_ret (jmp srso_return_thunk ?)
int3
srso_safe_ret: // embedded in movabs instruction
add $8,%rsp
ret
int3
srso_return_thunk:
call srso_safe_ret
ud2
While retbleed does:
zen_untrain_ret:
test $0xcc, %bl
lfence
jmp zen_return_thunk
int3
zen_return_thunk: // embedded in the test instruction
ret
int3
Where Zen1/2 flush the BTB entry using the instruction decoder trick
(test,movabs) Zen3/4 use BTB aliasing. SRSO adds a return sequence
(srso_safe_ret()) which forces the function return instruction to
speculate into a trap (UD2). This RET will then mispredict and
execution will continue at the return site read from the top of the
stack.
Pick one of three options at boot (evey function can only ever return
once).
[ bp: Fixup commit message uarch details and add them in a comment in
the code too. Add a comment about the srso_select_mitigation()
dependency on retbleed_select_mitigation(). Add moar ifdeffery for
32-bit builds. Add a dummy srso_untrain_ret_alias() definition for
32-bit alternatives needing the symbol. ]
Fixes: fb3bd914b3 ("x86/srso: Add a Speculative RAS Overflow mitigation")
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20230814121148.842775684@infradead.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 4ae68b26c3 upstream.
Objtool --rethunk does two things:
- it collects all (tail) call's of __x86_return_thunk and places them
into .return_sites. These are typically compiler generated, but
RET also emits this same.
- it fudges the validation of the __x86_return_thunk symbol; because
this symbol is inside another instruction, it can't actually find
the instruction pointed to by the symbol offset and gets upset.
Because these two things pertained to the same symbol, there was no
pressing need to separate these two separate things.
However, alas, along comes SRSO and more crazy things to deal with
appeared.
The SRSO patch itself added the following symbol names to identify as
rethunk:
'srso_untrain_ret', 'srso_safe_ret' and '__ret'
Where '__ret' is the old retbleed return thunk, 'srso_safe_ret' is a
new similarly embedded return thunk, and 'srso_untrain_ret' is
completely unrelated to anything the above does (and was only included
because of that INT3 vs UD2 issue fixed previous).
Clear things up by adding a second category for the embedded instruction
thing.
Fixes: fb3bd914b3 ("x86/srso: Add a Speculative RAS Overflow mitigation")
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20230814121148.704502245@infradead.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8743aeff5b upstream.
A netlink dump callback can return a positive number to signal that more
information needs to be dumped or zero to signal that the dump is
complete. In the second case, the core netlink code will append the
NLMSG_DONE message to the skb in order to indicate to user space that
the dump is complete.
The nexthop bucket dump callback always returns a positive number if
nexthop buckets were filled in the provided skb, even if the dump is
complete. This means that a dump will span at least two recvmsg() calls
as long as nexthop buckets are present. In the last recvmsg() call the
dump callback will not fill in any nexthop buckets because the previous
call indicated that the dump should restart from the last dumped nexthop
ID plus one.
# ip link add name dummy1 up type dummy
# ip nexthop add id 1 dev dummy1
# ip nexthop add id 10 group 1 type resilient buckets 2
# strace -e sendto,recvmsg -s 5 ip nexthop bucket
sendto(3, [[{nlmsg_len=24, nlmsg_type=RTM_GETNEXTHOPBUCKET, nlmsg_flags=NLM_F_REQUEST|NLM_F_DUMP, nlmsg_seq=1691396980, nlmsg_pid=0}, {family=AF_UNSPEC, data="\x00\x00\x00\x00\x00"...}], {nlmsg_len=0, nlmsg_type=0 /* NLMSG_??? */, nlmsg_flags=0, nlmsg_seq=0, nlmsg_pid=0}], 152, 0, NULL, 0) = 152
recvmsg(3, {msg_name={sa_family=AF_NETLINK, nl_pid=0, nl_groups=00000000}, msg_namelen=12, msg_iov=[{iov_base=NULL, iov_len=0}], msg_iovlen=1, msg_controllen=0, msg_flags=MSG_TRUNC}, MSG_PEEK|MSG_TRUNC) = 128
recvmsg(3, {msg_name={sa_family=AF_NETLINK, nl_pid=0, nl_groups=00000000}, msg_namelen=12, msg_iov=[{iov_base=[[{nlmsg_len=64, nlmsg_type=RTM_NEWNEXTHOPBUCKET, nlmsg_flags=NLM_F_MULTI, nlmsg_seq=1691396980, nlmsg_pid=347}, {family=AF_UNSPEC, data="\x00\x00\x00\x00\x00"...}], [{nlmsg_len=64, nlmsg_type=RTM_NEWNEXTHOPBUCKET, nlmsg_flags=NLM_F_MULTI, nlmsg_seq=1691396980, nlmsg_pid=347}, {family=AF_UNSPEC, data="\x00\x00\x00\x00\x00"...}]], iov_len=32768}], msg_iovlen=1, msg_controllen=0, msg_flags=0}, 0) = 128
id 10 index 0 idle_time 6.66 nhid 1
id 10 index 1 idle_time 6.66 nhid 1
recvmsg(3, {msg_name={sa_family=AF_NETLINK, nl_pid=0, nl_groups=00000000}, msg_namelen=12, msg_iov=[{iov_base=NULL, iov_len=0}], msg_iovlen=1, msg_controllen=0, msg_flags=MSG_TRUNC}, MSG_PEEK|MSG_TRUNC) = 20
recvmsg(3, {msg_name={sa_family=AF_NETLINK, nl_pid=0, nl_groups=00000000}, msg_namelen=12, msg_iov=[{iov_base=[{nlmsg_len=20, nlmsg_type=NLMSG_DONE, nlmsg_flags=NLM_F_MULTI, nlmsg_seq=1691396980, nlmsg_pid=347}, 0], iov_len=32768}], msg_iovlen=1, msg_controllen=0, msg_flags=0}, 0) = 20
+++ exited with 0 +++
This behavior is both inefficient and buggy. If the last nexthop to be
dumped had the maximum ID of 0xffffffff, then the dump will restart from
0 (0xffffffff + 1) and never end:
# ip link add name dummy1 up type dummy
# ip nexthop add id 1 dev dummy1
# ip nexthop add id $((2**32-1)) group 1 type resilient buckets 2
# ip nexthop bucket
id 4294967295 index 0 idle_time 5.55 nhid 1
id 4294967295 index 1 idle_time 5.55 nhid 1
id 4294967295 index 0 idle_time 5.55 nhid 1
id 4294967295 index 1 idle_time 5.55 nhid 1
[...]
Fix by adjusting the dump callback to return zero when the dump is
complete. After the fix only one recvmsg() call is made and the
NLMSG_DONE message is appended to the RTM_NEWNEXTHOPBUCKET responses:
# ip link add name dummy1 up type dummy
# ip nexthop add id 1 dev dummy1
# ip nexthop add id $((2**32-1)) group 1 type resilient buckets 2
# strace -e sendto,recvmsg -s 5 ip nexthop bucket
sendto(3, [[{nlmsg_len=24, nlmsg_type=RTM_GETNEXTHOPBUCKET, nlmsg_flags=NLM_F_REQUEST|NLM_F_DUMP, nlmsg_seq=1691396737, nlmsg_pid=0}, {family=AF_UNSPEC, data="\x00\x00\x00\x00\x00"...}], {nlmsg_len=0, nlmsg_type=0 /* NLMSG_??? */, nlmsg_flags=0, nlmsg_seq=0, nlmsg_pid=0}], 152, 0, NULL, 0) = 152
recvmsg(3, {msg_name={sa_family=AF_NETLINK, nl_pid=0, nl_groups=00000000}, msg_namelen=12, msg_iov=[{iov_base=NULL, iov_len=0}], msg_iovlen=1, msg_controllen=0, msg_flags=MSG_TRUNC}, MSG_PEEK|MSG_TRUNC) = 148
recvmsg(3, {msg_name={sa_family=AF_NETLINK, nl_pid=0, nl_groups=00000000}, msg_namelen=12, msg_iov=[{iov_base=[[{nlmsg_len=64, nlmsg_type=RTM_NEWNEXTHOPBUCKET, nlmsg_flags=NLM_F_MULTI, nlmsg_seq=1691396737, nlmsg_pid=350}, {family=AF_UNSPEC, data="\x00\x00\x00\x00\x00"...}], [{nlmsg_len=64, nlmsg_type=RTM_NEWNEXTHOPBUCKET, nlmsg_flags=NLM_F_MULTI, nlmsg_seq=1691396737, nlmsg_pid=350}, {family=AF_UNSPEC, data="\x00\x00\x00\x00\x00"...}], [{nlmsg_len=20, nlmsg_type=NLMSG_DONE, nlmsg_flags=NLM_F_MULTI, nlmsg_seq=1691396737, nlmsg_pid=350}, 0]], iov_len=32768}], msg_iovlen=1, msg_controllen=0, msg_flags=0}, 0) = 148
id 4294967295 index 0 idle_time 6.61 nhid 1
id 4294967295 index 1 idle_time 6.61 nhid 1
+++ exited with 0 +++
Note that if the NLMSG_DONE message cannot be appended because of size
limitations, then another recvmsg() will be needed, but the core netlink
code will not invoke the dump callback and simply reply with a
NLMSG_DONE message since it knows that the callback previously returned
zero.
Add a test that fails before the fix:
# ./fib_nexthops.sh -t basic_res
[...]
TEST: Maximum nexthop ID dump [FAIL]
[...]
And passes after it:
# ./fib_nexthops.sh -t basic_res
[...]
TEST: Maximum nexthop ID dump [ OK ]
[...]
Fixes: 8a1bbabb03 ("nexthop: Add netlink handlers for bucket dump")
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20230808075233.3337922-4-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 913f60cacd upstream.
A netlink dump callback can return a positive number to signal that more
information needs to be dumped or zero to signal that the dump is
complete. In the second case, the core netlink code will append the
NLMSG_DONE message to the skb in order to indicate to user space that
the dump is complete.
The nexthop dump callback always returns a positive number if nexthops
were filled in the provided skb, even if the dump is complete. This
means that a dump will span at least two recvmsg() calls as long as
nexthops are present. In the last recvmsg() call the dump callback will
not fill in any nexthops because the previous call indicated that the
dump should restart from the last dumped nexthop ID plus one.
# ip nexthop add id 1 blackhole
# strace -e sendto,recvmsg -s 5 ip nexthop
sendto(3, [[{nlmsg_len=24, nlmsg_type=RTM_GETNEXTHOP, nlmsg_flags=NLM_F_REQUEST|NLM_F_DUMP, nlmsg_seq=1691394315, nlmsg_pid=0}, {nh_family=AF_UNSPEC, nh_scope=RT_SCOPE_UNIVERSE, nh_protocol=RTPROT_UNSPEC, nh_flags=0}], {nlmsg_len=0, nlmsg_type=0 /* NLMSG_??? */, nlmsg_flags=0, nlmsg_seq=0, nlmsg_pid=0}], 152, 0, NULL, 0) = 152
recvmsg(3, {msg_name={sa_family=AF_NETLINK, nl_pid=0, nl_groups=00000000}, msg_namelen=12, msg_iov=[{iov_base=NULL, iov_len=0}], msg_iovlen=1, msg_controllen=0, msg_flags=MSG_TRUNC}, MSG_PEEK|MSG_TRUNC) = 36
recvmsg(3, {msg_name={sa_family=AF_NETLINK, nl_pid=0, nl_groups=00000000}, msg_namelen=12, msg_iov=[{iov_base=[{nlmsg_len=36, nlmsg_type=RTM_NEWNEXTHOP, nlmsg_flags=NLM_F_MULTI, nlmsg_seq=1691394315, nlmsg_pid=343}, {nh_family=AF_INET, nh_scope=RT_SCOPE_UNIVERSE, nh_protocol=RTPROT_UNSPEC, nh_flags=0}, [[{nla_len=8, nla_type=NHA_ID}, 1], {nla_len=4, nla_type=NHA_BLACKHOLE}]], iov_len=32768}], msg_iovlen=1, msg_controllen=0, msg_flags=0}, 0) = 36
id 1 blackhole
recvmsg(3, {msg_name={sa_family=AF_NETLINK, nl_pid=0, nl_groups=00000000}, msg_namelen=12, msg_iov=[{iov_base=NULL, iov_len=0}], msg_iovlen=1, msg_controllen=0, msg_flags=MSG_TRUNC}, MSG_PEEK|MSG_TRUNC) = 20
recvmsg(3, {msg_name={sa_family=AF_NETLINK, nl_pid=0, nl_groups=00000000}, msg_namelen=12, msg_iov=[{iov_base=[{nlmsg_len=20, nlmsg_type=NLMSG_DONE, nlmsg_flags=NLM_F_MULTI, nlmsg_seq=1691394315, nlmsg_pid=343}, 0], iov_len=32768}], msg_iovlen=1, msg_controllen=0, msg_flags=0}, 0) = 20
+++ exited with 0 +++
This behavior is both inefficient and buggy. If the last nexthop to be
dumped had the maximum ID of 0xffffffff, then the dump will restart from
0 (0xffffffff + 1) and never end:
# ip nexthop add id $((2**32-1)) blackhole
# ip nexthop
id 4294967295 blackhole
id 4294967295 blackhole
[...]
Fix by adjusting the dump callback to return zero when the dump is
complete. After the fix only one recvmsg() call is made and the
NLMSG_DONE message is appended to the RTM_NEWNEXTHOP response:
# ip nexthop add id $((2**32-1)) blackhole
# strace -e sendto,recvmsg -s 5 ip nexthop
sendto(3, [[{nlmsg_len=24, nlmsg_type=RTM_GETNEXTHOP, nlmsg_flags=NLM_F_REQUEST|NLM_F_DUMP, nlmsg_seq=1691394080, nlmsg_pid=0}, {nh_family=AF_UNSPEC, nh_scope=RT_SCOPE_UNIVERSE, nh_protocol=RTPROT_UNSPEC, nh_flags=0}], {nlmsg_len=0, nlmsg_type=0 /* NLMSG_??? */, nlmsg_flags=0, nlmsg_seq=0, nlmsg_pid=0}], 152, 0, NULL, 0) = 152
recvmsg(3, {msg_name={sa_family=AF_NETLINK, nl_pid=0, nl_groups=00000000}, msg_namelen=12, msg_iov=[{iov_base=NULL, iov_len=0}], msg_iovlen=1, msg_controllen=0, msg_flags=MSG_TRUNC}, MSG_PEEK|MSG_TRUNC) = 56
recvmsg(3, {msg_name={sa_family=AF_NETLINK, nl_pid=0, nl_groups=00000000}, msg_namelen=12, msg_iov=[{iov_base=[[{nlmsg_len=36, nlmsg_type=RTM_NEWNEXTHOP, nlmsg_flags=NLM_F_MULTI, nlmsg_seq=1691394080, nlmsg_pid=342}, {nh_family=AF_INET, nh_scope=RT_SCOPE_UNIVERSE, nh_protocol=RTPROT_UNSPEC, nh_flags=0}, [[{nla_len=8, nla_type=NHA_ID}, 4294967295], {nla_len=4, nla_type=NHA_BLACKHOLE}]], [{nlmsg_len=20, nlmsg_type=NLMSG_DONE, nlmsg_flags=NLM_F_MULTI, nlmsg_seq=1691394080, nlmsg_pid=342}, 0]], iov_len=32768}], msg_iovlen=1, msg_controllen=0, msg_flags=0}, 0) = 56
id 4294967295 blackhole
+++ exited with 0 +++
Note that if the NLMSG_DONE message cannot be appended because of size
limitations, then another recvmsg() will be needed, but the core netlink
code will not invoke the dump callback and simply reply with a
NLMSG_DONE message since it knows that the callback previously returned
zero.
Add a test that fails before the fix:
# ./fib_nexthops.sh -t basic
[...]
TEST: Maximum nexthop ID dump [FAIL]
[...]
And passes after it:
# ./fib_nexthops.sh -t basic
[...]
TEST: Maximum nexthop ID dump [ OK ]
[...]
Fixes: ab84be7e54 ("net: Initial nexthop code")
Reported-by: Petr Machata <petrm@nvidia.com>
Closes: https://lore.kernel.org/netdev/87sf91enuf.fsf@nvidia.com/
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20230808075233.3337922-2-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8b5ff37097 upstream.
Some test cases check that the group timer is (or isn't) 0. Instead of
grepping for "0.00" grep for " 0.00" as the former can also match
"260.00" which is the default group membership interval.
Fixes: b6d00da086 ("selftests: forwarding: Add bridge MDB test")
Reported-by: Mirsad Todorovac <mirsad.todorovac@alu.unizg.hr>
Closes: https://lore.kernel.org/netdev/adc5e40d-d040-a65e-eb26-edf47dac5b02@alu.unizg.hr/
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Tested-by: Mirsad Todorovac <mirsad.todorovac@alu.unizg.hr>
Reviewed-by: Hangbin Liu <liuhangbin@gmail.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://lore.kernel.org/r/20230808141503.4060661-18-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e98e195d90 upstream.
As explained in commit 8bcfb4ae4d ("selftests: forwarding: Fix failing
tests with old libnet"), old versions of libnet (used by mausezahn) do
not use the "SO_BINDTODEVICE" socket option. For IP unicast packets,
this can be solved by prefixing mausezahn invocations with "ip vrf
exec". However, IP multicast packets do not perform routing and simply
egress the bound device, which does not exist in this case.
Fix by specifying the source and destination MAC of the packet which
will cause mausezahn to use a packet socket instead of an IP socket.
Fixes: b6d00da086 ("selftests: forwarding: Add bridge MDB test")
Reported-by: Mirsad Todorovac <mirsad.todorovac@alu.unizg.hr>
Closes: https://lore.kernel.org/netdev/adc5e40d-d040-a65e-eb26-edf47dac5b02@alu.unizg.hr/
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Tested-by: Mirsad Todorovac <mirsad.todorovac@alu.unizg.hr>
Reviewed-by: Hangbin Liu <liuhangbin@gmail.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://lore.kernel.org/r/20230808141503.4060661-16-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit cb034948ac upstream.
As explained in commit 8bcfb4ae4d ("selftests: forwarding: Fix failing
tests with old libnet"), old versions of libnet (used by mausezahn) do
not use the "SO_BINDTODEVICE" socket option. For IP unicast packets,
this can be solved by prefixing mausezahn invocations with "ip vrf
exec". However, IP multicast packets do not perform routing and simply
egress the bound device, which does not exist in this case.
Fix by specifying the source and destination MAC of the packet which
will cause mausezahn to use a packet socket instead of an IP socket.
Fixes: 3446dcd7df ("selftests: forwarding: bridge_mdb_max: Add a new selftest")
Reported-by: Mirsad Todorovac <mirsad.todorovac@alu.unizg.hr>
Closes: https://lore.kernel.org/netdev/adc5e40d-d040-a65e-eb26-edf47dac5b02@alu.unizg.hr/
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Tested-by: Mirsad Todorovac <mirsad.todorovac@alu.unizg.hr>
Reviewed-by: Hangbin Liu <liuhangbin@gmail.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://lore.kernel.org/r/20230808141503.4060661-17-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 9ee37e53e7 upstream.
The test checks that filters that match on source or destination MAC
were only hit once. A host can send more than one packet with a given
source or destination MAC, resulting in failures.
Fix by relaxing the success criterion and instead check that the filters
were not hit zero times. Using tc_check_at_least_x_packets() is also an
option, but it is not available in older kernels.
Fixes: 07e5c75184 ("selftests: forwarding: Introduce tc flower matching tests")
Reported-by: Mirsad Todorovac <mirsad.todorovac@alu.unizg.hr>
Closes: https://lore.kernel.org/netdev/adc5e40d-d040-a65e-eb26-edf47dac5b02@alu.unizg.hr/
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Tested-by: Mirsad Todorovac <mirsad.todorovac@alu.unizg.hr>
Reviewed-by: Hangbin Liu <liuhangbin@gmail.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://lore.kernel.org/r/20230808141503.4060661-13-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5e8670610b upstream.
The test relies on 'nc' being the netcat version from the nmap project.
While this seems to be the case on Fedora, it is not the case on Ubuntu,
resulting in failures such as [1].
Fix by explicitly using the 'ncat' utility from the nmap project and the
skip the test in case it is not installed.
[1]
# timeout set to 0
# selftests: net/forwarding: tc_actions.sh
# TEST: gact drop and ok (skip_hw) [ OK ]
# TEST: mirred egress flower redirect (skip_hw) [ OK ]
# TEST: mirred egress flower mirror (skip_hw) [ OK ]
# TEST: mirred egress matchall mirror (skip_hw) [ OK ]
# TEST: mirred_egress_to_ingress (skip_hw) [ OK ]
# nc: invalid option -- '-'
# usage: nc [-46CDdFhklNnrStUuvZz] [-I length] [-i interval] [-M ttl]
# [-m minttl] [-O length] [-P proxy_username] [-p source_port]
# [-q seconds] [-s sourceaddr] [-T keyword] [-V rtable] [-W recvlimit]
# [-w timeout] [-X proxy_protocol] [-x proxy_address[:port]]
# [destination] [port]
# nc: invalid option -- '-'
# usage: nc [-46CDdFhklNnrStUuvZz] [-I length] [-i interval] [-M ttl]
# [-m minttl] [-O length] [-P proxy_username] [-p source_port]
# [-q seconds] [-s sourceaddr] [-T keyword] [-V rtable] [-W recvlimit]
# [-w timeout] [-X proxy_protocol] [-x proxy_address[:port]]
# [destination] [port]
# TEST: mirred_egress_to_ingress_tcp (skip_hw) [FAIL]
# server output check failed
# INFO: Could not test offloaded functionality
not ok 80 selftests: net/forwarding: tc_actions.sh # exit=1
Fixes: ca22da2fbd ("act_mirred: use the backlog for nested calls to mirred ingress")
Reported-by: Mirsad Todorovac <mirsad.todorovac@alu.unizg.hr>
Closes: https://lore.kernel.org/netdev/adc5e40d-d040-a65e-eb26-edf47dac5b02@alu.unizg.hr/
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Tested-by: Mirsad Todorovac <mirsad.todorovac@alu.unizg.hr>
Reviewed-by: Hangbin Liu <liuhangbin@gmail.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://lore.kernel.org/r/20230808141503.4060661-12-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 0529883ad1 upstream.
The default timeout for selftests is 45 seconds, but it is not enough
for forwarding selftests which can takes minutes to finish depending on
the number of tests cases:
# make -C tools/testing/selftests TARGETS=net/forwarding run_tests
TAP version 13
1..102
# timeout set to 45
# selftests: net/forwarding: bridge_igmp.sh
# TEST: IGMPv2 report 239.10.10.10 [ OK ]
# TEST: IGMPv2 leave 239.10.10.10 [ OK ]
# TEST: IGMPv3 report 239.10.10.10 is_include [ OK ]
# TEST: IGMPv3 report 239.10.10.10 include -> allow [ OK ]
#
not ok 1 selftests: net/forwarding: bridge_igmp.sh # TIMEOUT 45 seconds
Fix by switching off the timeout and setting it to 0. A similar change
was done for BPF selftests in commit 6fc5916cc2 ("selftests: bpf:
Switch off timeout").
Fixes: 81573b18f2 ("selftests/net/forwarding: add Makefile to install tests")
Reported-by: Mirsad Todorovac <mirsad.todorovac@alu.unizg.hr>
Closes: https://lore.kernel.org/netdev/8d149f8c-818e-d141-a0ce-a6bae606bc22@alu.unizg.hr/
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Tested-by: Mirsad Todorovac <mirsad.todorovac@alu.unizg.hr>
Reviewed-by: Hangbin Liu <liuhangbin@gmail.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://lore.kernel.org/r/20230808141503.4060661-3-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d72c83b1e4 upstream.
As explained in [1], the forwarding selftests are meant to be run with
either physical loopbacks or veth pairs. The interfaces are expected to
be specified in a user-provided forwarding.config file or as command
line arguments. By default, this file is not present and the tests fail:
# make -C tools/testing/selftests TARGETS=net/forwarding run_tests
[...]
TAP version 13
1..102
# timeout set to 45
# selftests: net/forwarding: bridge_igmp.sh
# Command line is not complete. Try option "help"
# Failed to create netif
not ok 1 selftests: net/forwarding: bridge_igmp.sh # exit=1
[...]
Fix by skipping a test if interfaces are not provided either via the
configuration file or command line arguments.
# make -C tools/testing/selftests TARGETS=net/forwarding run_tests
[...]
TAP version 13
1..102
# timeout set to 45
# selftests: net/forwarding: bridge_igmp.sh
# SKIP: Cannot create interface. Name not specified
ok 1 selftests: net/forwarding: bridge_igmp.sh # SKIP
[1] tools/testing/selftests/net/forwarding/README
Fixes: 81573b18f2 ("selftests/net/forwarding: add Makefile to install tests")
Reported-by: Mirsad Todorovac <mirsad.todorovac@alu.unizg.hr>
Closes: https://lore.kernel.org/netdev/856d454e-f83c-20cf-e166-6dc06cbc1543@alu.unizg.hr/
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Tested-by: Mirsad Todorovac <mirsad.todorovac@alu.unizg.hr>
Reviewed-by: Hangbin Liu <liuhangbin@gmail.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://lore.kernel.org/r/20230808141503.4060661-2-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 9a711cde07 upstream.
Layer 3 hardware stats cannot be used when the underlying interfaces are
veth pairs, resulting in failures:
# ./hw_stats_l3_gre.sh
TEST: ping gre flat [ OK ]
TEST: Test rx packets: [FAIL]
Traffic not reflected in the counter: 0 -> 0
TEST: Test tx packets: [FAIL]
Traffic not reflected in the counter: 0 -> 0
Fix by skipping the test when used with veth pairs.
Fixes: 813f97a268 ("selftests: forwarding: Add a tunnel-based test for L3 HW stats")
Reported-by: Mirsad Todorovac <mirsad.todorovac@alu.unizg.hr>
Closes: https://lore.kernel.org/netdev/adc5e40d-d040-a65e-eb26-edf47dac5b02@alu.unizg.hr/
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Tested-by: Mirsad Todorovac <mirsad.todorovac@alu.unizg.hr>
Reviewed-by: Hangbin Liu <liuhangbin@gmail.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://lore.kernel.org/r/20230808141503.4060661-10-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 60a36e2191 upstream.
Auto-negotiation cannot be tested with veth pairs, resulting in
failures:
# ./ethtool.sh
TEST: force of same speed autoneg off [FAIL]
error in configuration. swp1 speed Not autoneg off
[...]
Fix by skipping the test when used with veth pairs.
Fixes: 64916b57c0 ("selftests: forwarding: Add speed and auto-negotiation test")
Reported-by: Mirsad Todorovac <mirsad.todorovac@alu.unizg.hr>
Closes: https://lore.kernel.org/netdev/adc5e40d-d040-a65e-eb26-edf47dac5b02@alu.unizg.hr/
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Tested-by: Mirsad Todorovac <mirsad.todorovac@alu.unizg.hr>
Reviewed-by: Hangbin Liu <liuhangbin@gmail.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://lore.kernel.org/r/20230808141503.4060661-8-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 66e131861a upstream.
A handful of tests require physical loopbacks to be used instead of veth
pairs. Add a helper that these tests will invoke in order to be skipped
when executed with veth pairs.
Fixes: 64916b57c0 ("selftests: forwarding: Add speed and auto-negotiation test")
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Tested-by: Mirsad Todorovac <mirsad.todorovac@alu.unizg.hr>
Reviewed-by: Hangbin Liu <liuhangbin@gmail.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://lore.kernel.org/r/20230808141503.4060661-7-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d5ad9aae13 upstream.
Commit 3bcbc20942 ("selftests/rseq: Play nice with binaries statically
linked against glibc 2.35+") which is now in Linus' tree introduced uses
of __weak but did nothing to ensure that a definition is provided for it
resulting in build failures for the rseq tests:
rseq.c:41:1: error: unknown type name '__weak'
__weak ptrdiff_t __rseq_offset;
^
rseq.c:41:17: error: expected ';' after top level declarator
__weak ptrdiff_t __rseq_offset;
^
;
rseq.c:42:1: error: unknown type name '__weak'
__weak unsigned int __rseq_size;
^
rseq.c:43:1: error: unknown type name '__weak'
__weak unsigned int __rseq_flags;
Fix this by using the definition from tools/include compiler.h.
Fixes: 3bcbc20942 ("selftests/rseq: Play nice with binaries statically linked against glibc 2.35+")
Signed-off-by: Mark Brown <broonie@kernel.org>
Message-Id: <20230804-kselftest-rseq-build-v1-1-015830b66aa9@kernel.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 90f0074cd9 upstream.
BPF CI has reported the following failure:
Error: #200/79 sockmap_listen/sockmap VSOCK test_vsock_redir
Error: #200/79 sockmap_listen/sockmap VSOCK test_vsock_redir
./test_progs:vsock_unix_redir_connectible:1506: egress: write: Transport endpoint is not connected
vsock_unix_redir_connectible:FAIL:1506
./test_progs:vsock_unix_redir_connectible:1506: ingress: write: Transport endpoint is not connected
vsock_unix_redir_connectible:FAIL:1506
./test_progs:vsock_unix_redir_connectible:1506: egress: write: Transport endpoint is not connected
vsock_unix_redir_connectible:FAIL:1506
./test_progs:vsock_unix_redir_connectible:1514: ingress: recv() err, errno=11
vsock_unix_redir_connectible:FAIL:1514
./test_progs:vsock_unix_redir_connectible:1518: ingress: vsock socket map failed, a != b
vsock_unix_redir_connectible:FAIL:1518
./test_progs:vsock_unix_redir_connectible:1525: ingress: want pass count 1, have 0
It’s because the recv(... MSG_DONTWAIT) syscall in the test case is
called before the queued work sk_psock_backlog() in the kernel finishes
executing. So the data to be read is still queued in psock->ingress_skb
and cannot be read by the user program. Therefore, the non-blocking
recv() reads nothing and reports an EAGAIN error.
So replace recv(... MSG_DONTWAIT) with xrecv_nonblock(), which calls
select() to wait for data to be readable or timeout before calls recv().
Fixes: d61bd8c1fd ("selftests/bpf: add a test case for vsock sockmap")
Signed-off-by: Xu Kuohai <xukuohai@huawei.com>
Link: https://lore.kernel.org/r/20230804073740.194770-4-xukuohai@huaweicloud.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ab2eda04e2 upstream.
The selftest relies on iproute2 changes present in version 6.3, but the
test does not check for it, resulting in error:
# ./bridge_mdb.sh
INFO: # Host entries configuration tests
TEST: Common host entries configuration tests (IPv4) [FAIL]
Managed to add IPv4 host entry with a filter mode
TEST: Common host entries configuration tests (IPv6) [FAIL]
Managed to add IPv6 host entry with a filter mode
TEST: Common host entries configuration tests (L2) [FAIL]
Managed to add L2 host entry with a filter mode
INFO: # Port group entries configuration tests - (*, G)
Command "replace" is unknown, try "bridge mdb help".
[...]
Fix by skipping the test if iproute2 is too old.
Fixes: b6d00da086 ("selftests: forwarding: Add bridge MDB test")
Reported-by: Mirsad Todorovac <mirsad.todorovac@alu.unizg.hr>
Closes: https://lore.kernel.org/netdev/6b04b2ba-2372-6f6b-3ac8-b7cba1cfae83@alu.unizg.hr/
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Tested-by: Mirsad Todorovac <mirsad.todorovac@alu.unizg.hr>
Reviewed-by: Hangbin Liu <liuhangbin@gmail.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://lore.kernel.org/r/20230808141503.4060661-4-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6bdf3d9765 upstream.
The selftest relies on iproute2 changes present in version 6.3, but the
test does not check for it, resulting in errors:
# ./bridge_mdb_max.sh
INFO: 802.1d tests
TEST: cfg4: port: ngroups reporting [FAIL]
Number of groups was null, now is null, but 5 expected
TEST: ctl4: port: ngroups reporting [FAIL]
Number of groups was null, now is null, but 5 expected
TEST: cfg6: port: ngroups reporting [FAIL]
Number of groups was null, now is null, but 5 expected
[...]
Fix by skipping the test if iproute2 is too old.
Fixes: 3446dcd7df ("selftests: forwarding: bridge_mdb_max: Add a new selftest")
Reported-by: Mirsad Todorovac <mirsad.todorovac@alu.unizg.hr>
Closes: https://lore.kernel.org/netdev/6b04b2ba-2372-6f6b-3ac8-b7cba1cfae83@alu.unizg.hr/
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Tested-by: Mirsad Todorovac <mirsad.todorovac@alu.unizg.hr>
Reviewed-by: Hangbin Liu <liuhangbin@gmail.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://lore.kernel.org/r/20230808141503.4060661-5-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 23fb886a1c upstream.
MAC Merge cannot be tested with veth pairs, resulting in failures:
# ./ethtool_mm.sh
[...]
TEST: Manual configuration with verification: swp1 to swp2 [FAIL]
Verification did not succeed
Fix by skipping the test when the interfaces do not support MAC Merge.
Fixes: e6991384ac ("selftests: forwarding: add a test for MAC Merge layer")
Reported-by: Mirsad Todorovac <mirsad.todorovac@alu.unizg.hr>
Closes: https://lore.kernel.org/netdev/adc5e40d-d040-a65e-eb26-edf47dac5b02@alu.unizg.hr/
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Hangbin Liu <liuhangbin@gmail.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://lore.kernel.org/r/20230808141503.4060661-11-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Aleksa Sarai