commit ccf61486fe upstream.
Due to an oversight in commit 1b3044e39a ("procfs: fix pthread
cross-thread naming if !PR_DUMPABLE") in switching from REG to NOD,
chmod operations on /proc/thread-self/comm were no longer blocked as
they are on almost all other procfs files.
A very similar situation with /proc/self/environ was used to as a root
exploit a long time ago, but procfs has SB_I_NOEXEC so this is simply a
correctness issue.
Ref: https://lwn.net/Articles/191954/
Ref: 6d76fa58b0 ("Don't allow chmod() on the /proc/<pid>/ files")
Fixes: 1b3044e39a ("procfs: fix pthread cross-thread naming if !PR_DUMPABLE")
Cc: stable@vger.kernel.org # v4.7+
Signed-off-by: Aleksa Sarai <cyphar@cyphar.com>
Message-Id: <20230713141001.27046-1-cyphar@cyphar.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 1a721de848 upstream.
Commit a33df75c63 ("block: use an xarray for disk->part_tbl") remove
disk_expand_part_tbl() in add_partition(), which means all kinds of
devices will support extended dynamic `dev_t`.
However, some devices with GENHD_FL_NO_PART are not expected to add or
resize partition.
Fix this by adding check of GENHD_FL_NO_PART before add or resize
partition.
Fixes: a33df75c63 ("block: use an xarray for disk->part_tbl")
Signed-off-by: Li Lingfeng <lilingfeng3@huawei.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20230831075900.1725842-1-lilingfeng@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5260bd6d36 upstream.
This reverts commit d5af729dc2.
d5af729dc2 ("PCI: Mark NVIDIA T4 GPUs to avoid bus reset") avoided
Secondary Bus Reset on the T4 because the reset seemed to not work when the
T4 was directly attached to a Root Port.
But NVIDIA thinks the issue is probably related to some issue with the Root
Port, not with the T4. The T4 provides neither PM nor FLR reset, so
masking bus reset compromises this device for assignment scenarios.
Revert d5af729dc2 as requested by Wu Zongyong. This will leave SBR
broken in the specific configuration Wu tested, as it was in v6.5, so Wu
will debug that further.
Link: https://lore.kernel.org/r/ZPqMCDWvITlOLHgJ@wuzongyong-alibaba
Link: https://lore.kernel.org/r/20230908201104.GA305023@bhelgaas
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5a7693e6bb upstream.
ntb_transport_tx_free_entry() never returns 0 with the current
calculation. If head == tail, then it would return qp->tx_max_entry.
Change compare to tail >= head and when they are equal, a 0 would be
returned.
Fixes: e74bfeedad ("NTB: Add flow control to the ntb_netdev")
Reviewed-by: Logan Gunthorpe <logang@deltatee.com>
Signed-off-by: renlonglong <ren.longlong@h3c.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Jon Mason <jdmason@kudzu.us>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit cc79bd2738 upstream.
The tx tail index is not reset when the link goes down. This causes the
tail index to go out of sync when the link goes down and comes back up.
Refactor the ntb_qp_link_down_reset() and reset the tail index as well.
Fixes: 2849b5d706 ("NTB: Reset transport QP link stats on down")
Reported-by: Yuan Y Lu <yuan.y.lu@intel.com>
Tested-by: Yuan Y Lu <yuan.y.lu@intel.com>
Reviewed-by: Logan Gunthorpe <logang@deltatee.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Jon Mason <jdmason@kudzu.us>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f195a1a6fe upstream.
Currently when the transport receive packets after netdev has closed the
transport returns error and triggers tx errors to be incremented and
carrier to be stopped. There is no reason to return error if the device is
already closed. Drop the packet and return 0.
Fixes: e26a5843f7 ("NTB: Split ntb_hw_intel and ntb_transport drivers")
Reported-by: Yuan Y Lu <yuan.y.lu@intel.com>
Tested-by: Yuan Y Lu <yuan.y.lu@intel.com>
Reviewed-by: Logan Gunthorpe <logang@deltatee.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Jon Mason <jdmason@kudzu.us>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5694ba13b0 upstream.
For a device with no Power Management Capability, pci_power_up() previously
returned 0 (success) if the platform was able to put the device in D0,
which led to pci_set_full_power_state() trying to read PCI_PM_CTRL, even
though it doesn't exist.
Since dev->pm_cap == 0 in this case, pci_set_full_power_state() actually
read the wrong register, interpreted it as PCI_PM_CTRL, and corrupted
dev->current_state. This led to messages like this in some cases:
pci 0000:01:00.0: Refused to change power state from D3hot to D0
To prevent this, make pci_power_up() always return a negative failure code
if the device lacks a Power Management Capability, even if non-PCI platform
power management has been able to put the device in D0. The failure will
prevent pci_set_full_power_state() from trying to access PCI_PM_CTRL.
Fixes: e200904b27 ("PCI/PM: Split pci_power_up()")
Link: https://lore.kernel.org/r/20230824013738.1894965-1-chenfeiyang@loongson.cn
Signed-off-by: Feiyang Chen <chenfeiyang@loongson.cn>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: "Rafael J. Wysocki" <rafael@kernel.org>
Cc: stable@vger.kernel.org # v5.19+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 04bbe86324 upstream.
When a Linux VM with an assigned PCI device runs on Hyper-V, if the PCI
device driver is not loaded yet (i.e. MSI-X/MSI is not enabled on the
device yet), doing a VM hibernation triggers a panic in
hv_pci_restore_msi_msg() -> msi_lock_descs(&pdev->dev), because
pdev->dev.msi.data is still NULL.
Avoid the panic by checking if MSI-X/MSI is enabled.
Link: https://lore.kernel.org/r/20230816175939.21566-1-decui@microsoft.com
Fixes: dc2b453290 ("PCI: hv: Rework MSI handling")
Signed-off-by: Dexuan Cui <decui@microsoft.com>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Reviewed-by: sathyanarayanan.kuppuswamy@linux.intel.com
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 4ca10f3e31 upstream.
The driver retries certain register reads 3 times if the returned value is
0. This was done because the controller could return 0 for certain
registers if other registers were being accessed concurrently by the BMC.
In certain systems with increased BMC interactions, the register values
returned can be 0 for longer than 3 retries. Change the retry count from 3
to 30 for the affected registers to prevent problems with out-of-band
management.
Fixes: b899202901 ("scsi: mpt3sas: Add separate function for aero doorbell reads")
Cc: stable@vger.kernel.org
Signed-off-by: Ranjan Kumar <ranjan.kumar@broadcom.com>
Link: https://lore.kernel.org/r/20230829090020.5417-2-ranjan.kumar@broadcom.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d74e481609 upstream.
The startup procedure shouldn't be started with interrupts masked, as that
may entail silent failures.
Kick off initialization only after the interrupts are unmasked.
Cc: stable@vger.kernel.org # v4.12+
Fixes: d96d3f30c0 ("[media] media: venus: hfi: add Venus HFI files")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Stanimir Varbanov <stanimir.k.varbanov@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 86495af117 upstream.
In commit 9011e49d54 ("modules: only allow symbol_get of
EXPORT_SYMBOL_GPL modules") the use of symbol_get is properly restricted
to GPL-only marked symbols. This interacts oddly with the DVB logic
which only uses dvb_attach() to load the dvb driver which then uses
symbol_get().
Fix this up by properly marking all of the dvb_attach attach symbols as
EXPORT_SYMBOL_GPL().
Fixes: 9011e49d54 ("modules: only allow symbol_get of EXPORT_SYMBOL_GPL modules")
Cc: stable <stable@kernel.org>
Reported-by: Stefan Lippers-Hollmann <s.l-h@gmx.de>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: Christoph Hellwig <hch@lst.de>
Cc: linux-media@vger.kernel.org
Cc: linux-modules@vger.kernel.org
Acked-by: Luis Chamberlain <mcgrof@kernel.org>
Acked-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Link: https://lore.kernel.org/r/20230908092035.3815268-2-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 99bf5b0baa upstream.
Recently in v6.3-rc1 there was a change affecting behaviour of hrtimers
(commit 0c52310f26) and causing
few issues on platforms with two CS42L42 codecs. Canonical/Dell
has reported an issue with Vostro-3910.
We need to increase this value by 15ms.
Link: https://bugs.launchpad.net/somerville/+bug/2031060
Fixes: 9fb9fa18fb ("ALSA: hda/cirrus: Add extra 10 ms delay to allow PLL settle and lock.")
Signed-off-by: Vitaly Rodionov <vitalyr@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230904160033.908135-1-vitalyr@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6e13d6528b upstream.
I3C masters are expected to support hot-join. This means at initialization
time we might not yet discover any device and this should not be treated
as a fatal error.
During the DAA procedure which happens at probe time, if no device has
joined, all CCC will be NACKed (from a bus perspective). This leads to an
early return with an error code which fails the probe of the master.
Let's avoid this by just telling the core through an I3C_ERROR_M2
return command code that no device was discovered, which is a valid
situation. This way the master will no longer bail out and fail to probe
for a wrong reason.
Cc: stable@vger.kernel.org
Fixes: dd3c52846d ("i3c: master: svc: Add Silvaco I3C master driver")
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Acked-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/r/20230831141324.2841525-1-Frank.Li@nxp.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f6834c8c59 upstream.
The minimum level of gcc supported for building the kernel is v5.1.
v5.x releases of gcc emitted a three instruction sequence for
-mprofile-kernel:
mflr r0
std r0, 16(r1)
bl _mcount
It is only with the v6.x releases that gcc started emitting the two
instruction sequence for -mprofile-kernel, omitting the second store
instruction.
With the older three instruction sequence, the actual ftrace location
can be the 5th instruction into a function. Update the allowed offset
for ftrace location from 12 to 16 to accommodate the same.
Cc: stable@vger.kernel.org
Fixes: 7af82ff90a ("powerpc/ftrace: Ignore weak functions")
Signed-off-by: Naveen N Rao <naveen@kernel.org>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/7b265908a9461e38fc756ef9b569703860a80621.1687166935.git.naveen@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 303be4b335 upstream.
When I do LTP test, LTP test case ksm06 caused panic at
break_ksm_pmd_entry
-> pmd_leaf (Huge page table but False)
-> pte_present (panic)
The reason is pmd_leaf() is not defined, So like commit 501b810467
("mips: mm: add p?d_leaf() definitions") add p?d_leaf() definition for
LoongArch.
Fixes: 09cfefb7fa ("LoongArch: Add memory management")
Cc: stable@vger.kernel.org
Acked-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Hongchen Zhang <zhanghongchen@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 687eb3c42f upstream.
With introduction of ERI access control in RG.0 base address of the PMU
unit registers has changed. Add support for the new PMU configuration.
Cc: stable@vger.kernel.org
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 1611917f39 upstream.
As made mention of in commit 099303e9a9 ("drm/amd/display: eDP
intermittent black screen during PnP"), we need to turn off the
display's backlight before powering off an eDP display. Not doing so
will result in undefined behaviour according to the eDP spec. So, set
DCN301's edp_backlight_control() function pointer to
dce110_edp_backlight_control().
Cc: stable@vger.kernel.org
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2765
Fixes: 9c75891fee ("drm/amd/display: rework recent update PHY state commit")
Suggested-by: Swapnil Patel <swapnil.patel@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 1ca8819320 upstream.
Struct lv5207lp_platform_data refers to a platform device within
the Linux device hierarchy. The test in lv5207lp_backlight_check_fb()
compares it against the fbdev device in struct fb_info.dev, which
is different. Fix the test by comparing to struct fb_info.device.
Fixes a bug in the backlight driver and prepares fbdev for making
struct fb_info.dev optional.
v2:
* move renames into separate patch (Javier, Sam, Michael)
Fixes: 82e5c40d88 ("backlight: Add Sanyo LV5207LP backlight driver")
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: Rich Felker <dalias@libc.org>
Cc: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Cc: Lee Jones <lee@kernel.org>
Cc: Daniel Thompson <daniel.thompson@linaro.org>
Cc: Jingoo Han <jingoohan1@gmail.com>
Cc: linux-sh@vger.kernel.org
Cc: dri-devel@lists.freedesktop.org
Cc: <stable@vger.kernel.org> # v3.12+
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230613110953.24176-6-tzimmermann@suse.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 992bdddaab upstream.
Struct bd6107_platform_data refers to a platform device within
the Linux device hierarchy. The test in bd6107_backlight_check_fb()
compares it against the fbdev device in struct fb_info.dev, which
is different. Fix the test by comparing to struct fb_info.device.
Fixes a bug in the backlight driver and prepares fbdev for making
struct fb_info.dev optional.
v2:
* move renames into separate patch (Javier, Sam, Michael)
Fixes: 67b43e5904 ("backlight: Add ROHM BD6107 backlight driver")
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Cc: Lee Jones <lee@kernel.org>
Cc: Daniel Thompson <daniel.thompson@linaro.org>
Cc: Jingoo Han <jingoohan1@gmail.com>
Cc: dri-devel@lists.freedesktop.org
Cc: <stable@vger.kernel.org> # v3.12+
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230613110953.24176-2-tzimmermann@suse.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7b91d017f7 upstream.
Struct gpio_backlight_platform_data refers to a platform device within
the Linux device hierarchy. The test in gpio_backlight_check_fb()
compares it against the fbdev device in struct fb_info.dev, which
is different. Fix the test by comparing to struct fb_info.device.
Fixes a bug in the backlight driver and prepares fbdev for making
struct fb_info.dev optional.
v2:
* move renames into separate patch (Javier, Sam, Michael)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Fixes: 8b770e3c98 ("backlight: Add GPIO-based backlight driver")
Cc: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Cc: Rich Felker <dalias@libc.org>
Cc: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Cc: Lee Jones <lee@kernel.org>
Cc: Daniel Thompson <daniel.thompson@linaro.org>
Cc: Jingoo Han <jingoohan1@gmail.com>
Cc: linux-sh@vger.kernel.org
Cc: dri-devel@lists.freedesktop.org
Cc: <stable@vger.kernel.org> # v3.12+
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230613110953.24176-4-tzimmermann@suse.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 45500dc4e0 upstream.
io-wq will retry iopoll even when it failed with -EAGAIN. If that
races with task exit, which sets TIF_NOTIFY_SIGNAL for all its workers,
such workers might potentially infinitely spin retrying iopoll again and
again and each time failing on some allocation / waiting / etc. Don't
keep spinning if io-wq is dying.
Fixes: 561fb04a6a ("io_uring: replace workqueue usage with io-wq")
Cc: stable@vger.kernel.org
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ebdfefc09c upstream.
If we setup the ring with SQPOLL, then that polling thread has its
own io-wq setup. This means that if the application uses
IORING_REGISTER_IOWQ_AFF to set the io-wq affinity, we should not be
setting it for the invoking task, but rather the sqpoll task.
Add an sqpoll helper that parks the thread and updates the affinity,
and use that one if we're using SQPOLL.
Fixes: fe76421d1d ("io_uring: allow user configurable IO thread CPU affinity")
Cc: stable@vger.kernel.org # 5.10+
Link: https://github.com/axboe/liburing/discussions/884
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 569f5308e5 upstream.
io_req_local_work_add() peeks into the work list, which can be executed
in the meanwhile. It's completely fine without KASAN as we're in an RCU
read section and it's SLAB_TYPESAFE_BY_RCU. With KASAN though it may
trigger a false positive warning because internal io_uring caches are
sanitised.
Remove sanitisation from the io_uring request cache for now.
Cc: stable@vger.kernel.org
Fixes: 8751d15426 ("io_uring: reduce scheduling due to tw")
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/c6fbf7a82a341e66a0007c76eefd9d57f2d3ba51.1691541473.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit cbc0285433 upstream.
It is possible for xa_load() to observe a sibling entry pointing to
another sibling entry. An example:
Thread A: Thread B:
xa_store_range(xa, entry, 188, 191, gfp);
xa_load(xa, 191);
entry = xa_entry(xa, node, 63);
[entry is a sibling of 188]
xa_store_range(xa, entry, 184, 191, gfp);
if (xa_is_sibling(entry))
offset = xa_to_sibling(entry);
entry = xa_entry(xas->xa, node, offset);
[entry is now a sibling of 184]
It is sufficient to go around this loop until we hit a non-sibling entry.
Sibling entries always point earlier in the node, so we are guaranteed
to terminate this search.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Fixes: 6b24ca4a1a ("mm: Use multi-index entries in the page cache")
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 847fb80cc0 upstream.
If function pwrdm_read_prev_pwrst() returns -EINVAL, we will end
up accessing array pwrdm->state_counter through negative index
-22. This is wrong and the compiler is legitimately warning us
about this potential problem.
Fix this by sanity checking the value stored in variable _prev_
before accessing array pwrdm->state_counter.
Address the following -Warray-bounds warning:
arch/arm/mach-omap2/powerdomain.c:178:45: warning: array subscript -22 is below array bounds of 'unsigned int[4]' [-Warray-bounds]
Link: https://github.com/KSPP/linux/issues/307
Fixes: ba20bb1269 ("OMAP: PM counter infrastructure.")
Cc: stable@vger.kernel.org
Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/lkml/20230607050639.LzbPn%25lkp@intel.com/
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Message-ID: <ZIFVGwImU3kpaGeH@work>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6cf1a126de upstream.
Kmemleak reported the following leak info in try_smi_init():
unreferenced object 0xffff00018ecf9400 (size 1024):
comm "modprobe", pid 2707763, jiffies 4300851415 (age 773.308s)
backtrace:
[<000000004ca5b312>] __kmalloc+0x4b8/0x7b0
[<00000000953b1072>] try_smi_init+0x148/0x5dc [ipmi_si]
[<000000006460d325>] 0xffff800081b10148
[<0000000039206ea5>] do_one_initcall+0x64/0x2a4
[<00000000601399ce>] do_init_module+0x50/0x300
[<000000003c12ba3c>] load_module+0x7a8/0x9e0
[<00000000c246fffe>] __se_sys_init_module+0x104/0x180
[<00000000eea99093>] __arm64_sys_init_module+0x24/0x30
[<0000000021b1ef87>] el0_svc_common.constprop.0+0x94/0x250
[<0000000070f4f8b7>] do_el0_svc+0x48/0xe0
[<000000005a05337f>] el0_svc+0x24/0x3c
[<000000005eb248d6>] el0_sync_handler+0x160/0x164
[<0000000030a59039>] el0_sync+0x160/0x180
The problem was that when an error occurred before handlers registration
and after allocating `new_smi->si_sm`, the variable wouldn't be freed in
the error handling afterwards since `shutdown_smi()` hadn't been
registered yet. Fix it by adding a `kfree()` in the error handling path
in `try_smi_init()`.
Cc: stable@vger.kernel.org # 4.19+
Fixes: 7960f18a56 ("ipmi_si: Convert over to a shutdown handler")
Signed-off-by: Yi Yang <yiyang13@huawei.com>
Co-developed-by: GONG, Ruiqi <gongruiqi@huaweicloud.com>
Signed-off-by: GONG, Ruiqi <gongruiqi@huaweicloud.com>
Message-Id: <20230629123328.2402075-1-gongruiqi@huaweicloud.com>
Signed-off-by: Corey Minyard <minyard@acm.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit cdb50033dd upstream.
A 32-bit mask was used on the 64-bit PCI address used for mapping MSIs.
This would result in the upper 32 bits being unintentionally zeroed and
MSIs getting mapped to incorrect PCI addresses if the address had any
of the upper bits set.
Replace 32-bit mask by appropriate 64-bit mask.
[kwilczynski: use GENMASK_ULL() over GENMASK() for 32-bit compatibility]
Fixes: dc73ed0f1b ("PCI: rockchip: Fix window mapping and address translation for endpoint")
Closes: https://lore.kernel.org/linux-pci/8d19e5b7-8fa0-44a4-90e2-9bb06f5eb694@moroto.mountain
Link: https://lore.kernel.org/linux-pci/20230703085845.2052008-1-rick.wertenbroek@gmail.com
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Rick Wertenbroek <rick.wertenbroek@gmail.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7d3c7d2a29 upstream.
Select V4L2_FWNODE and VIDEO_V4L2_SUBDEV_API for all sensor drivers. This
also adds the options to drivers that don't specifically need them, these
are still seldom used drivers using old APIs. The upside is that these
should now all compile --- many drivers have had missing dependencies.
The "menu" is replaced by selectable "menuconfig" to select the needed
V4L2_FWNODE and VIDEO_V4L2_SUBDEV_API options.
Also select MEDIA_CONTROLLER which VIDEO_V4L2_SUBDEV_API effectively
depends on, and add the I2C dependency to the menu.
Reported-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: stable@vger.kernel.org # for >= 6.1
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 607bcc4213 upstream.
Fix the following smatch warning:
drivers/media/i2c/ccs/ccs-data.c:524 ccs_data_parse_rules() warn: address
of NULL pointer 'rules'
The CCS static data rule parser does not check an if rule has been
obtained before checking for other rule types (which depend on the if
rule). In practice this means parsing invalid CCS static data could lead
to dereferencing a NULL pointer.
Reported-by: Hans Verkuil <hverkuil@xs4all.nl>
Fixes: a6b396f410 ("media: ccs: Add CCS static data parser library")
Cc: stable@vger.kernel.org # for 5.11 and up
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 2b8272ff4a upstream.
Xiongfeng reported and debugged a self deadlock of the task which initiates
and controls a CPU hot-unplug operation vs. the CFS bandwidth timer.
CPU1 CPU2
T1 sets cfs_quota
starts hrtimer cfs_bandwidth 'period_timer'
T1 is migrated to CPU2
T1 initiates offlining of CPU1
Hotplug operation starts
...
'period_timer' expires and is re-enqueued on CPU1
...
take_cpu_down()
CPU1 shuts down and does not handle timers
anymore. They have to be migrated in the
post dead hotplug steps by the control task.
T1 runs the post dead offline operation
T1 is scheduled out
T1 waits for 'period_timer' to expire
T1 waits there forever if it is scheduled out before it can execute the hrtimer
offline callback hrtimers_dead_cpu().
Cure this by delegating the hotplug control operation to a worker thread on
an online CPU. This takes the initiating user space task, which might be
affected by the bandwidth timer, completely out of the picture.
Reported-by: Xiongfeng Wang <wangxiongfeng2@huawei.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Yu Liao <liaoyu15@huawei.com>
Acked-by: Vincent Guittot <vincent.guittot@linaro.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/lkml/8e785777-03aa-99e1-d20e-e956f5685be6@huawei.com
Link: https://lore.kernel.org/r/87h6oqdq0i.ffs@tglx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 0818e739b5 upstream.
It is unsafe to dump vmalloc area information when trying to do so from
some contexts. Add a safer trylock version of the same function to do a
best-effort VMA finding and use it from vmalloc_dump_obj().
[applied test robot feedback on unused function fix.]
[applied Uladzislau feedback on locking.]
Link: https://lkml.kernel.org/r/20230904180806.1002832-1-joel@joelfernandes.org
Fixes: 98f180837a ("mm: Make mem_dump_obj() handle vmalloc() memory")
Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Reviewed-by: Uladzislau Rezki (Sony) <urezki@gmail.com>
Reported-by: Zhen Lei <thunder.leizhen@huaweicloud.com>
Cc: Paul E. McKenney <paulmck@kernel.org>
Cc: Zqiang <qiang.zhang1211@gmail.com>
Cc: <stable@vger.kernel.org>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f669b8a683 upstream.
Because scsi_finish_command() subtracts the residual from the buffer
length, residual overflows must not be reported. Reflect this in the SCSI
documentation. See also commit 9237f04e12 ("scsi: core: Fix
scsi_get/set_resid() interface")
Cc: Damien Le Moal <dlemoal@kernel.org>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Douglas Gilbert <dgilbert@interlog.com>
Cc: stable@vger.kernel.org
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20230721160154.874010-2-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 53e9e33ede upstream.
If an output buffer size exceeded U16_MAX, the min_t(u16, ...) cast in
copy_data() was causing writes to truncate. This manifested as output
bytes being skipped, seen as %NUL bytes in pstore dumps when the available
record size was larger than 65536. Fix the cast to no longer truncate
the calculation.
Cc: Petr Mladek <pmladek@suse.com>
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: John Ogness <john.ogness@linutronix.de>
Reported-by: Vijay Balakrishna <vijayb@linux.microsoft.com>
Link: https://lore.kernel.org/lkml/d8bb1ec7-a4c5-43a2-9de0-9643a70b899f@linux.microsoft.com/
Fixes: b6cf8b3f33 ("printk: add lockless ringbuffer")
Cc: stable@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Tested-by: Vijay Balakrishna <vijayb@linux.microsoft.com>
Tested-by: Guilherme G. Piccoli <gpiccoli@igalia.com> # Steam Deck
Reviewed-by: Tyler Hicks (Microsoft) <code@tyhicks.com>
Tested-by: Tyler Hicks (Microsoft) <code@tyhicks.com>
Reviewed-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20230811054528.never.165-kees@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c83ad36a18 upstream.
Currently, for double invoke call_rcu(), will dump rcu_head objects memory
info, if the objects is not allocated from the slab allocator, the
vmalloc_dump_obj() will be invoke and the vmap_area_lock spinlock need to
be held, since the call_rcu() can be invoked in interrupt context,
therefore, there is a possibility of spinlock deadlock scenarios.
And in Preempt-RT kernel, the rcutorture test also trigger the following
lockdep warning:
BUG: sleeping function called from invalid context at kernel/locking/spinlock_rt.c:48
in_atomic(): 1, irqs_disabled(): 1, non_block: 0, pid: 1, name: swapper/0
preempt_count: 1, expected: 0
RCU nest depth: 1, expected: 1
3 locks held by swapper/0/1:
#0: ffffffffb534ee80 (fullstop_mutex){+.+.}-{4:4}, at: torture_init_begin+0x24/0xa0
#1: ffffffffb5307940 (rcu_read_lock){....}-{1:3}, at: rcu_torture_init+0x1ec7/0x2370
#2: ffffffffb536af40 (vmap_area_lock){+.+.}-{3:3}, at: find_vmap_area+0x1f/0x70
irq event stamp: 565512
hardirqs last enabled at (565511): [<ffffffffb379b138>] __call_rcu_common+0x218/0x940
hardirqs last disabled at (565512): [<ffffffffb5804262>] rcu_torture_init+0x20b2/0x2370
softirqs last enabled at (399112): [<ffffffffb36b2586>] __local_bh_enable_ip+0x126/0x170
softirqs last disabled at (399106): [<ffffffffb43fef59>] inet_register_protosw+0x9/0x1d0
Preemption disabled at:
[<ffffffffb58040c3>] rcu_torture_init+0x1f13/0x2370
CPU: 0 PID: 1 Comm: swapper/0 Tainted: G W 6.5.0-rc4-rt2-yocto-preempt-rt+ #15
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.16.2-0-gea1b7a073390-prebuilt.qemu.org 04/01/2014
Call Trace:
<TASK>
dump_stack_lvl+0x68/0xb0
dump_stack+0x14/0x20
__might_resched+0x1aa/0x280
? __pfx_rcu_torture_err_cb+0x10/0x10
rt_spin_lock+0x53/0x130
? find_vmap_area+0x1f/0x70
find_vmap_area+0x1f/0x70
vmalloc_dump_obj+0x20/0x60
mem_dump_obj+0x22/0x90
__call_rcu_common+0x5bf/0x940
? debug_smp_processor_id+0x1b/0x30
call_rcu_hurry+0x14/0x20
rcu_torture_init+0x1f82/0x2370
? __pfx_rcu_torture_leak_cb+0x10/0x10
? __pfx_rcu_torture_leak_cb+0x10/0x10
? __pfx_rcu_torture_init+0x10/0x10
do_one_initcall+0x6c/0x300
? debug_smp_processor_id+0x1b/0x30
kernel_init_freeable+0x2b9/0x540
? __pfx_kernel_init+0x10/0x10
kernel_init+0x1f/0x150
ret_from_fork+0x40/0x50
? __pfx_kernel_init+0x10/0x10
ret_from_fork_asm+0x1b/0x30
</TASK>
The previous patch fixes this by using the deadlock-safe best-effort
version of find_vm_area. However, in case of failure print the fact that
the pointer was a vmalloc pointer so that we print at least something.
Link: https://lkml.kernel.org/r/20230904180806.1002832-2-joel@joelfernandes.org
Fixes: 98f180837a ("mm: Make mem_dump_obj() handle vmalloc() memory")
Signed-off-by: Zqiang <qiang.zhang1211@gmail.com>
Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Reported-by: Zhen Lei <thunder.leizhen@huaweicloud.com>
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Paul E. McKenney <paulmck@kernel.org>
Cc: Uladzislau Rezki (Sony) <urezki@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c1dbd8a849 upstream.
When doing mkfs.xfs on a pmem device, the following warning was
reported:
------------[ cut here ]------------
WARNING: CPU: 2 PID: 384 at block/blk-core.c:751 submit_bio_noacct
Modules linked in:
CPU: 2 PID: 384 Comm: mkfs.xfs Not tainted 6.4.0-rc7+ #154
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996)
RIP: 0010:submit_bio_noacct+0x340/0x520
......
Call Trace:
<TASK>
? submit_bio_noacct+0xd5/0x520
submit_bio+0x37/0x60
async_pmem_flush+0x79/0xa0
nvdimm_flush+0x17/0x40
pmem_submit_bio+0x370/0x390
__submit_bio+0xbc/0x190
submit_bio_noacct_nocheck+0x14d/0x370
submit_bio_noacct+0x1ef/0x520
submit_bio+0x55/0x60
submit_bio_wait+0x5a/0xc0
blkdev_issue_flush+0x44/0x60
The root cause is that submit_bio_noacct() needs bio_op() is either
WRITE or ZONE_APPEND for flush bio and async_pmem_flush() doesn't assign
REQ_OP_WRITE when allocating flush bio, so submit_bio_noacct just fail
the flush bio.
Simply fix it by adding the missing REQ_OP_WRITE for flush bio. And we
could fix the flush order issue and do flush optimization later.
Cc: stable@vger.kernel.org # 6.3+
Fixes: b4a6bb3a67 ("block: add a sanity check for non-write flush/fua bios")
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Pankaj Gupta <pankaj.gupta@amd.com>
Tested-by: Pankaj Gupta <pankaj.gupta@amd.com>
Signed-off-by: Hou Tao <houtao1@huawei.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 358040e380 upstream.
The update of rate_num/den and msbits were factored out to
fixup_unreferenced_params() function to be called explicitly after the
hw_refine or hw_params procedure. It's called from
snd_pcm_hw_refine_user(), but it's forgotten in the PCM compat ioctl.
This ended up with the incomplete rate_num/den and msbits parameters
when 32bit compat ioctl is used.
This patch adds the missing call in snd_pcm_ioctl_hw_params_compat().
Reported-by: Meng_Cai@novatek.com.cn
Fixes: f9a076bff0 ("ALSA: pcm: calculate non-mask/non-interval parameters always when possible")
Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20230829134344.31588-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 669281ee7e upstream.
MGLRU has a LRU list for each zone for each type (anon/file) in each
generation:
long nr_pages[MAX_NR_GENS][ANON_AND_FILE][MAX_NR_ZONES];
The min_seq (oldest generation) can progress independently for each
type but the max_seq (youngest generation) is shared for both anon and
file. This is to maintain a common frame of reference.
In order for eviction to advance the min_seq of a type, all the per-zone
lists in the oldest generation of that type must be empty.
The eviction logic only considers pages from eligible zones for
eviction or promotion.
scan_folios() {
...
for (zone = sc->reclaim_idx; zone >= 0; zone--) {
...
sort_folio(); // Promote
...
isolate_folio(); // Evict
}
...
}
Consider the system has the movable zone configured and default 4
generations. The current state of the system is as shown below
(only illustrating one type for simplicity):
Type: ANON
Zone DMA32 Normal Movable Device
Gen 0 0 0 4GB 0
Gen 1 0 1GB 1MB 0
Gen 2 1MB 4GB 1MB 0
Gen 3 1MB 1MB 1MB 0
Now consider there is a GFP_KERNEL allocation request (eligible zone
index <= Normal), evict_folios() will return without doing any work
since there are no pages to scan in the eligible zones of the oldest
generation. Reclaim won't make progress until triggered from a ZONE_MOVABLE
allocation request; which may not happen soon if there is a lot of free
memory in the movable zone. This can lead to OOM kills, although there
is 1GB pages in the Normal zone of Gen 1 that we have not yet tried to
reclaim.
This issue is not seen in the conventional active/inactive LRU since
there are no per-zone lists.
If there are no (not enough) folios to scan in the eligible zones, move
folios from ineligible zone (zone_index > reclaim_index) to the next
generation. This allows for the progression of min_seq and reclaiming
from the next generation (Gen 1).
Qualcomm, Mediatek and raspberrypi [1] discovered this issue independently.
[1] https://github.com/raspberrypi/linux/issues/5395
Link: https://lkml.kernel.org/r/20230802025606.346758-1-kaleshsingh@google.com
Fixes: ac35a49023 ("mm: multi-gen LRU: minimal implementation")
Signed-off-by: Kalesh Singh <kaleshsingh@google.com>
Reported-by: Charan Teja Kalla <quic_charante@quicinc.com>
Reported-by: Lecopzer Chen <lecopzer.chen@mediatek.com>
Tested-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> [mediatek]
Tested-by: Charan Teja Kalla <quic_charante@quicinc.com>
Cc: Yu Zhao <yuzhao@google.com>
Cc: Barry Song <baohua@kernel.org>
Cc: Brian Geffon <bgeffon@google.com>
Cc: Jan Alexander Steffens (heftig) <heftig@archlinux.org>
Cc: Matthias Brugger <matthias.bgg@gmail.com>
Cc: Oleksandr Natalenko <oleksandr@natalenko.name>
Cc: Qi Zheng <zhengqi.arch@bytedance.com>
Cc: Steven Barrett <steven@liquorix.net>
Cc: Suleiman Souhlal <suleiman@google.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Aneesh Kumar K V <aneesh.kumar@linux.ibm.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5693d07759 upstream.
srcu_init_notifier_head() allocates resources that need to be released
with a srcu_cleanup_notifier_head() call.
Reported by kmemleak.
Fixes: 0fe3a66410 ("PM / devfreq: Add new DEVFREQ_TRANSITION_NOTIFIER notifier")
Cc: <stable@vger.kernel.org>
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Dhruva Gole <d-gole@ti.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit bb5ed01cd2 upstream.
Increase the RX buffer size to 3K when the SBP bit is on. The size of
the RX buffer determines the number of pages allocated which may not
be sufficient for receive frames larger than the set MTU size.
Cc: stable@vger.kernel.org
Fixes: 89eaefb61d ("igb: Support RX-ALL feature flag.")
Reported-by: Manfred Rudigier <manfred.rudigier@omicronenergy.com>
Signed-off-by: Radoslaw Tyl <radoslawx.tyl@intel.com>
Tested-by: Arpana Arland <arpanax.arland@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 2ea35288c8 upstream.
Commit bf5c25d608 ("skbuff: in skb_segment, call zerocopy functions
once per nskb") added the call to zero copy functions in skb_segment().
The change introduced a bug in skb_segment() because skb_orphan_frags()
may possibly change the number of fragments or allocate new fragments
altogether leaving nrfrags and frag to point to the old values. This can
cause a panic with stacktrace like the one below.
[ 193.894380] BUG: kernel NULL pointer dereference, address: 00000000000000bc
[ 193.895273] CPU: 13 PID: 18164 Comm: vh-net-17428 Kdump: loaded Tainted: G O 5.15.123+ #26
[ 193.903919] RIP: 0010:skb_segment+0xb0e/0x12f0
[ 194.021892] Call Trace:
[ 194.027422] <TASK>
[ 194.072861] tcp_gso_segment+0x107/0x540
[ 194.082031] inet_gso_segment+0x15c/0x3d0
[ 194.090783] skb_mac_gso_segment+0x9f/0x110
[ 194.095016] __skb_gso_segment+0xc1/0x190
[ 194.103131] netem_enqueue+0x290/0xb10 [sch_netem]
[ 194.107071] dev_qdisc_enqueue+0x16/0x70
[ 194.110884] __dev_queue_xmit+0x63b/0xb30
[ 194.121670] bond_start_xmit+0x159/0x380 [bonding]
[ 194.128506] dev_hard_start_xmit+0xc3/0x1e0
[ 194.131787] __dev_queue_xmit+0x8a0/0xb30
[ 194.138225] macvlan_start_xmit+0x4f/0x100 [macvlan]
[ 194.141477] dev_hard_start_xmit+0xc3/0x1e0
[ 194.144622] sch_direct_xmit+0xe3/0x280
[ 194.147748] __dev_queue_xmit+0x54a/0xb30
[ 194.154131] tap_get_user+0x2a8/0x9c0 [tap]
[ 194.157358] tap_sendmsg+0x52/0x8e0 [tap]
[ 194.167049] handle_tx_zerocopy+0x14e/0x4c0 [vhost_net]
[ 194.173631] handle_tx+0xcd/0xe0 [vhost_net]
[ 194.176959] vhost_worker+0x76/0xb0 [vhost]
[ 194.183667] kthread+0x118/0x140
[ 194.190358] ret_from_fork+0x1f/0x30
[ 194.193670] </TASK>
In this case calling skb_orphan_frags() updated nr_frags leaving nrfrags
local variable in skb_segment() stale. This resulted in the code hitting
i >= nrfrags prematurely and trying to move to next frag_skb using
list_skb pointer, which was NULL, and caused kernel panic. Move the call
to zero copy functions before using frags and nr_frags.
Fixes: bf5c25d608 ("skbuff: in skb_segment, call zerocopy functions once per nskb")
Signed-off-by: Mohamed Khalfella <mkhalfella@purestorage.com>
Reported-by: Amit Goyal <agoyal@purestorage.com>
Cc: stable@vger.kernel.org
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e994764976 upstream.
sctp_mt_check doesn't validate the flag_count field. An attacker can
take advantage of that to trigger a OOB read and leak memory
information.
Add the field validation in the checkentry function.
Fixes: 2e4e6a17af ("[NETFILTER] x_tables: Abstraction layer for {ip,ip6,arp}_tables")
Cc: stable@vger.kernel.org
Reported-by: Lucas Leong <wmliang@infosec.exchange>
Signed-off-by: Wander Lairson Costa <wander@redhat.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 69c5d284f6 upstream.
The xt_u32 module doesn't validate the fields in the xt_u32 structure.
An attacker may take advantage of this to trigger an OOB read by setting
the size fields with a value beyond the arrays boundaries.
Add a checkentry function to validate the structure.
This was originally reported by the ZDI project (ZDI-CAN-18408).
Fixes: 1b50b8a371 ("[NETFILTER]: Add u32 match")
Cc: stable@vger.kernel.org
Signed-off-by: Wander Lairson Costa <wander@redhat.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Aleksa Sarai