[ Upstream commit 3c5d0dce8c ]
Fix the calculation of the utrd pointer. This patch addresses the following
Coverity complaint:
CID 1538170: (#1 of 1): Extra sizeof expression (SIZEOF_MISMATCH)
suspicious_pointer_arithmetic: Adding sq_head_slot * 32UL /* sizeof (struct
utp_transfer_req_desc) */ to pointer hwq->sqe_base_addr of type struct
utp_transfer_req_desc * is suspicious because adding an integral value to
this pointer automatically scales that value by the size, 32 bytes, of the
pointed-to type, struct utp_transfer_req_desc. Most likely, the
multiplication by sizeof (struct utp_transfer_req_desc) in this expression
is extraneous and should be eliminated.
Cc: Bao D. Nguyen <quic_nguyenb@quicinc.com>
Cc: Stanley Chu <stanley.chu@mediatek.com>
Cc: Can Guo <quic_cang@quicinc.com>
Fixes: 8d72903489 ("scsi: ufs: mcq: Add supporting functions for MCQ abort")
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20240410000751.1047758-1-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4bf3855497 ]
Currently, the UIC_COMMAND_COMPL interrupt is disabled and a wmb() is used
to complete the register write before any following writes.
wmb() ensures the writes complete in that order, but completion doesn't
mean that it isn't stored in a buffer somewhere. The recommendation for
ensuring this bit has taken effect on the device is to perform a read back
to force it to make it all the way to the device. This is documented in
device-io.rst and a talk by Will Deacon on this can be seen over here:
https://youtu.be/i6DayghhA8Q?si=MiyxB5cKJXSaoc01&t=1678
Let's do that to ensure the bit hits the device. Because the wmb()'s
purpose wasn't to add extra ordering (on top of the ordering guaranteed by
writel()/readl()), it can safely be removed.
Fixes: d75f7fe495 ("scsi: ufs: reduce the interrupts for power mode change requests")
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Can Guo <quic_cang@quicinc.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Andrew Halaney <ahalaney@redhat.com>
Link: https://lore.kernel.org/r/20240329-ufs-reset-ensure-effect-before-delay-v5-9-181252004586@redhat.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e4a6288771 ]
Currently, interrupts are cleared and disabled prior to registering the
interrupt. An mb() is used to complete the clear/disable writes before the
interrupt is registered.
mb() ensures that the write completes, but completion doesn't mean that it
isn't stored in a buffer somewhere. The recommendation for ensuring these
bits have taken effect on the device is to perform a read back to force it
to make it all the way to the device. This is documented in device-io.rst
and a talk by Will Deacon on this can be seen over here:
https://youtu.be/i6DayghhA8Q?si=MiyxB5cKJXSaoc01&t=1678
Let's do that to ensure these bits hit the device. Because the mb()'s
purpose wasn't to add extra ordering (on top of the ordering guaranteed by
writel()/readl()), it can safely be removed.
Fixes: 199ef13cac ("scsi: ufs: avoid spurious UFS host controller interrupts")
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Can Guo <quic_cang@quicinc.com>
Signed-off-by: Andrew Halaney <ahalaney@redhat.com>
Link: https://lore.kernel.org/r/20240329-ufs-reset-ensure-effect-before-delay-v5-8-181252004586@redhat.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 408e28086f ]
Currently, the UTP_TASK_REQ_LIST_BASE_L/UTP_TASK_REQ_LIST_BASE_H regs are
written to and then completed with an mb().
mb() ensures that the write completes, but completion doesn't mean that it
isn't stored in a buffer somewhere. The recommendation for ensuring these
bits have taken effect on the device is to perform a read back to force it
to make it all the way to the device. This is documented in device-io.rst
and a talk by Will Deacon on this can be seen over here:
https://youtu.be/i6DayghhA8Q?si=MiyxB5cKJXSaoc01&t=1678
Let's do that to ensure the bits hit the device. Because the mb()'s purpose
wasn't to add extra ordering (on top of the ordering guaranteed by
writel()/readl()), it can safely be removed.
Fixes: 88441a8d35 ("scsi: ufs: core: Add hibernation callbacks")
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Can Guo <quic_cang@quicinc.com>
Signed-off-by: Andrew Halaney <ahalaney@redhat.com>
Link: https://lore.kernel.org/r/20240329-ufs-reset-ensure-effect-before-delay-v5-7-181252004586@redhat.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b715c55daf ]
Currently, HCLKDIV is written to and then completed with an mb().
mb() ensures that the write completes, but completion doesn't mean that it
isn't stored in a buffer somewhere. The recommendation for ensuring this
bit has taken effect on the device is to perform a read back to force it to
make it all the way to the device. This is documented in device-io.rst and
a talk by Will Deacon on this can be seen over here:
https://youtu.be/i6DayghhA8Q?si=MiyxB5cKJXSaoc01&t=1678
Let's do that to ensure the bit hits the device. Because the mb()'s purpose
wasn't to add extra ordering (on top of the ordering guaranteed by
writel()/readl()), it can safely be removed.
Fixes: d90996dae8 ("scsi: ufs: Add UFS platform driver for Cadence UFS")
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Andrew Halaney <ahalaney@redhat.com>
Link: https://lore.kernel.org/r/20240329-ufs-reset-ensure-effect-before-delay-v5-6-181252004586@redhat.com
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d9488511b3 ]
Currently, the CGC enable bit is written and then an mb() is used to ensure
that completes before continuing.
mb() ensures that the write completes, but completion doesn't mean that it
isn't stored in a buffer somewhere. The recommendation for ensuring this
bit has taken effect on the device is to perform a read back to force it to
make it all the way to the device. This is documented in device-io.rst and
a talk by Will Deacon on this can be seen over here:
https://youtu.be/i6DayghhA8Q?si=MiyxB5cKJXSaoc01&t=1678
Let's do that to ensure the bit hits the device. Because the mb()'s purpose
wasn't to add extra ordering (on top of the ordering guaranteed by
writel()/readl()), it can safely be removed.
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Can Guo <quic_cang@quicinc.com>
Fixes: 81c0fc51b7 ("ufs-qcom: add support for Qualcomm Technologies Inc platforms")
Signed-off-by: Andrew Halaney <ahalaney@redhat.com>
Link: https://lore.kernel.org/r/20240329-ufs-reset-ensure-effect-before-delay-v5-5-181252004586@redhat.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 823150ecf0 ]
Currently, the QUNIPRO_SEL bit is written to and then an mb() is used to
ensure that completes before continuing.
mb() ensures that the write completes, but completion doesn't mean that it
isn't stored in a buffer somewhere. The recommendation for ensuring this
bit has taken effect on the device is to perform a read back to force it to
make it all the way to the device. This is documented in device-io.rst and
a talk by Will Deacon on this can be seen over here:
https://youtu.be/i6DayghhA8Q?si=MiyxB5cKJXSaoc01&t=1678
But, there's really no reason to even ensure completion before
continuing. The only requirement here is that this write is ordered to this
endpoint (which readl()/writel() guarantees already). For that reason the
mb() can be dropped altogether without anything forcing completion.
Fixes: f06fcc7155 ("scsi: ufs-qcom: add QUniPro hardware support and power optimizations")
Signed-off-by: Andrew Halaney <ahalaney@redhat.com>
Link: https://lore.kernel.org/r/20240329-ufs-reset-ensure-effect-before-delay-v5-4-181252004586@redhat.com
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a862fafa26 ]
Currently after writing to REG_UFS_SYS1CLK_1US a mb() is used to ensure
that write has gone through to the device.
mb() ensures that the write completes, but completion doesn't mean that it
isn't stored in a buffer somewhere. The recommendation for ensuring this
bit has taken effect on the device is to perform a read back to force it to
make it all the way to the device. This is documented in device-io.rst and
a talk by Will Deacon on this can be seen over here:
https://youtu.be/i6DayghhA8Q?si=MiyxB5cKJXSaoc01&t=1678
Let's do that to ensure the bit hits the device. Because the mb()'s purpose
wasn't to add extra ordering (on top of the ordering guaranteed by
writel()/readl()), it can safely be removed.
Fixes: f06fcc7155 ("scsi: ufs-qcom: add QUniPro hardware support and power optimizations")
Reviewed-by: Can Guo <quic_cang@quicinc.com>
Signed-off-by: Andrew Halaney <ahalaney@redhat.com>
Link: https://lore.kernel.org/r/20240329-ufs-reset-ensure-effect-before-delay-v5-2-181252004586@redhat.com
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c4d28e06b0 ]
Currently, the reset bit for the UFS provided reset controller (used by its
phy) is written to, and then a mb() happens to try and ensure that hit the
device. Immediately afterwards a usleep_range() occurs.
mb() ensures that the write completes, but completion doesn't mean that it
isn't stored in a buffer somewhere. The recommendation for ensuring this
bit has taken effect on the device is to perform a read back to force it to
make it all the way to the device. This is documented in device-io.rst and
a talk by Will Deacon on this can be seen over here:
https://youtu.be/i6DayghhA8Q?si=MiyxB5cKJXSaoc01&t=1678
Let's do that to ensure the bit hits the device. By doing so and
guaranteeing the ordering against the immediately following usleep_range(),
the mb() can safely be removed.
Fixes: 81c0fc51b7 ("ufs-qcom: add support for Qualcomm Technologies Inc platforms")
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Can Guo <quic_cang@quicinc.com>
Signed-off-by: Andrew Halaney <ahalaney@redhat.com>
Link: https://lore.kernel.org/r/20240329-ufs-reset-ensure-effect-before-delay-v5-1-181252004586@redhat.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2a26a11e9c ]
When a dev command times out in MCQ mode, a successfully cleared command
should cause a retry. However, because we currently return 0, the caller
considers the command a success which causes the following error to be
logged: "Invalid offset 0x0 in descriptor IDN 0x9, length 0x0".
Retry if clearing the command was successful.
Signed-off-by: Peter Wang <peter.wang@mediatek.com>
Link: https://lore.kernel.org/r/20240328111244.3599-1-peter.wang@mediatek.com
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6bc5e70b1c ]
When wl suspend error occurs, for example BKOP or SSU timeout, the host
triggers an error handler and returns -EBUSY to break the wl suspend
process. However, it is possible for the runtime PM to enter wl suspend
again before the error handler has finished, and return -EINVAL because the
device is in an error state. To address this, ensure that the rumtime PM
waits for the error handler to finish, or trigger the error handler in such
cases, because returning -EINVAL can cause the I/O to hang.
Signed-off-by: Peter Wang <peter.wang@mediatek.com>
Link: https://lore.kernel.org/r/20240329015036.15707-1-peter.wang@mediatek.com
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 767712f91d ]
As per JEDEC Standard No. 223E Section 5.9.2, the max # active commands
value programmed by the host sw in MCQConfig.MAC should be one less than
the actual value.
Signed-off-by: Rohit Ner <rohitner@google.com>
Link: https://lore.kernel.org/r/20240220095637.2900067-1-rohitner@google.com
Reviewed-by: Peter Wang <peter.wang@mediatek.com>
Reviewed-by: Can Guo <quic_cang@quicinc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8db8f6ce55 ]
These entries are necessary to scale the interconnect bandwidth while
operating in Gear 5.
Cc: Amit Pundir <amit.pundir@linaro.org>
Fixes: 03ce80a1bb ("scsi: ufs: qcom: Add support for scaling interconnects")
Tested-by: Amit Pundir <amit.pundir@linaro.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20240403-ufs-icc-fix-v2-1-958412a5eb45@linaro.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 10a39667a1 ]
On sa8775p-ride, probing the HBA will go through the
UFSHCD_QUIRK_REINIT_AFTER_MAX_GEAR_SWITCH path although the power info is
the same during the second init.
The REINIT quirk only applies starting with controller v4. For these,
ufs_qcom_get_hs_gear() reads the highest supported gear when setting the
host_params. After the negotiation, if the host and device are on the same
gear, it is the highest gear supported between the two. Skip REINIT to save
some time.
Signed-off-by: Eric Chanudet <echanude@redhat.com>
Link: https://lore.kernel.org/r/20240123192854.1724905-4-echanude@redhat.com
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Tested-by: Andrew Halaney <ahalaney@redhat.com> # sa8775p-ride
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 81e2c1a0f8 upstream.
The MSM8996 DT doesn't provide frequency limits for the core_clk_unipro
clock, which results in miscalculation of the cycles_in_1us value. Provide
the backwards-compatible default to support existing MSM8996 DT files.
Fixes: b4e13e1ae9 ("scsi: ufs: qcom: Add multiple frequency support for MAX_CORE_CLK_1US_CYCLES")
Cc: Nitin Rawat <quic_nitirawa@quicinc.com>
Cc: stable@vger.kernel.org # 6.7.x
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240218-msm8996-fix-ufs-v3-1-40aab49899a3@linaro.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There is one goto where "sched_clk_scaling_suspend_work" is true but
"scale_up" is uninitialized. It leads to a Smatch uninitialized variable
warning:
drivers/ufs/core/ufshcd.c:1589 ufshcd_devfreq_target() error: uninitialized symbol 'scale_up'.
Fixes: 1d969731b8 ("scsi: ufs: core: Only suspend clock scaling if scaling down")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://lore.kernel.org/r/c787d37f-1107-4512-8991-bccf80e74a35@moroto.mountain
Reviewed-by: Peter Wang <peter.wang@mediatek.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
If ufshcd_err_handler() is called in a suspend/resume situation,
ufs_release() can be called twice and active_reqs end up going negative.
This is because ufshcd_err_handling_prepare() and
ufshcd_err_handling_unprepare() both call ufshcd_release().
Remove superfluous call to ufshcd_release().
Signed-off-by: SEO HOYOUNG <hy50.seo@samsung.com>
Link: https://lore.kernel.org/r/20240122083324.11797-1-hy50.seo@samsung.com
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Can Guo <quic_cang@quicinc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Final round of fixes that came in too late to send in the first
request. It's 9 bug fixes and one version update (because of a bug
fix) and one set of PCI ID additions. There's one bug fix in the core
which is really a one liner (except that an additional sdev pointer
was added for convenience) and the rest are in drivers.
Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com>
-----BEGIN PGP SIGNATURE-----
iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCZavlICYcamFtZXMuYm90
dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishSIpAP9Ynm64
sxlwxmaRv9uzf6+Nbadesve0UWCPHHYjIxtNBwD/SV6wgn/WdJqO1rONR8w3RknL
ZFShKw5QmiKXVDmDJTg=
=WSYQ
-----END PGP SIGNATURE-----
Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI updates from James Bottomley:
"Final round of fixes that came in too late to send in the first
request.
It's nine bug fixes and one version update (because of a bug fix) and
one set of PCI ID additions. There's one bug fix in the core which is
really a one liner (except that an additional sdev pointer was added
for convenience) and the rest are in drivers"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: target: core: Add TMF to tmr_list handling
scsi: core: Kick the requeue list after inserting when flushing
scsi: fnic: unlock on error path in fnic_queuecommand()
scsi: fcoe: Fix unsigned comparison with zero in store_ctlr_mode()
scsi: mpi3mr: Fix mpi3mr_fw.c kernel-doc warnings
scsi: smartpqi: Bump driver version to 2.1.26-030
scsi: smartpqi: Fix logical volume rescan race condition
scsi: smartpqi: Add new controller PCI IDs
scsi: ufs: qcom: Remove unnecessary goto statement from ufs_qcom_config_esi()
scsi: ufs: core: Remove the ufshcd_hba_exit() call from ufshcd_async_scan()
scsi: ufs: core: Simplify power management during async scan
Updates to the usual drivers (ufs, mpi3mr, mpt3sas, lpfc, fnic,
hisi_sas, arcmsr, ) plus the usual assorted minor fixes and updates.
This time around there's only a single line update to the core, so
nothing major and barely anything minor.
Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com>
-----BEGIN PGP SIGNATURE-----
iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCZZ7roSYcamFtZXMuYm90
dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pisha3lAQC5BAGM
7OKk39iOtsKdq8uxYAhYx871sNtwBp8+BSk1FgEAhy1hg7fgCnOvl7chbSNDR6p/
mW11fYi4j2UvxECT2tg=
=/tvT
-----END PGP SIGNATURE-----
Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI updates from James Bottomley:
"Updates to the usual drivers (ufs, mpi3mr, mpt3sas, lpfc, fnic,
hisi_sas, arcmsr, ) plus the usual assorted minor fixes and updates.
This time around there's only a single line update to the core, so
nothing major and barely anything minor"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (135 commits)
scsi: ufs: core: Simplify ufshcd_auto_hibern8_update()
scsi: ufs: core: Rename ufshcd_auto_hibern8_enable() and make it static
scsi: ufs: qcom: Fix ESI vector mask
scsi: ufs: host: Fix kernel-doc warning
scsi: hisi_sas: Correct the number of global debugfs registers
scsi: hisi_sas: Rollback some operations if FLR failed
scsi: hisi_sas: Check before using pointer variables
scsi: hisi_sas: Replace with standard error code return value
scsi: hisi_sas: Set .phy_attached before notifing phyup event HISI_PHYE_PHY_UP_PM
scsi: ufs: core: Add sysfs node for UFS RTC update
scsi: ufs: core: Add UFS RTC support
scsi: ufs: core: Add ufshcd_is_ufs_dev_busy()
scsi: ufs: qcom: Remove unused definitions
scsi: ufs: qcom: Use ufshcd_rmwl() where applicable
scsi: ufs: qcom: Remove support for host controllers older than v2.0
scsi: ufs: qcom: Simplify ufs_qcom_{assert/deassert}_reset
scsi: ufs: qcom: Initialize cycles_in_1us variable in ufs_qcom_set_core_clk_ctrl()
scsi: ufs: qcom: Sort includes alphabetically
scsi: ufs: qcom: Remove unused ufs_qcom_hosts struct array
scsi: ufs: qcom: Use dev_err_probe() to simplify error handling of devm_gpiod_get_optional()
...
There is only one place where goto is used, and it is unnecessary to check
the ret value through 'goto out' because the ret value is already true.
Therefore, remove the goto statement and integrate the '!ret' condition
into the existing code.
Signed-off-by: ChanWoo Lee <cw9316.lee@samsung.com>
Link: https://lore.kernel.org/r/20231219082740.27644-1-cw9316.lee@samsung.com
Reviewed-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Calling ufshcd_hba_exit() from a function that is called asynchronously
from ufshcd_init() is wrong because this triggers multiple race
conditions. Instead of calling ufshcd_hba_exit(), log an error message.
Reported-by: Daniel Mentz <danielmentz@google.com>
Fixes: 1d337ec2f3 ("ufs: improve init sequence")
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20231218225229.2542156-3-bvanassche@acm.org
Reviewed-by: Can Guo <quic_cang@quicinc.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
ufshcd_init() calls pm_runtime_get_sync() before it calls
async_schedule(). ufshcd_async_scan() calls pm_runtime_put_sync() directly
or indirectly from ufshcd_add_lus(). Simplify ufshcd_async_scan() by always
calling pm_runtime_put_sync() from ufshcd_async_scan().
Cc: <stable@vger.kernel.org>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20231218225229.2542156-2-bvanassche@acm.org
Reviewed-by: Can Guo <quic_cang@quicinc.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
When accessing sq_tail_slot without protection from sq_lock, a race
condition can cause multiple SQEs to be copied to duplicate SQE slots. This
can lead to multiple stability issues. Fix this by moving the *dest
initialization in ufshcd_send_command() back under protection from the
sq_lock.
Fixes: 3c85f087fa ("scsi: ufs: mcq: Use pointer arithmetic in ufshcd_send_command()")
Signed-off-by: Can Guo <quic_cang@quicinc.com>
Link: https://lore.kernel.org/r/1702913550-20631-1-git-send-email-quic_cang@quicinc.com
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
In commit 031312dbc6 ("scsi: ufs: ufs-qcom: Remove unnecessary goto
statements") the error handling was accidentally changed, resulting in the
error of ufs_qcom_clk_scale_*() calls not being returned.
This is the case I checked:
ufs_qcom_clk_scale_notify ->
'ufs_qcom_clk_scale_up_/down_pre_change' error ->
return 0;
Make sure those errors are properly returned.
Fixes: 031312dbc6 ("scsi: ufs: ufs-qcom: Remove unnecessary goto statements")
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: ChanWoo Lee <cw9316.lee@samsung.com>
Link: https://lore.kernel.org/r/20231215003812.29650-1-cw9316.lee@samsung.com
Reviewed-by: Andrew Halaney <ahalaney@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Calls to ufshcd_auto_hibern8_update() are already serialized: this function
is either called if user space software is not running (preparing to
suspend) or from a single sysfs store callback function. Kernfs serializes
sysfs .store() callbacks. No functionality is changed.
Reviewed-by: Bao D. Nguyen <quic_nguyenb@quicinc.com>
Reviewed-by: Can Guo <quic_cang@quicinc.com>
Cc: Avri Altman <avri.altman@wdc.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20231214192416.3638077-3-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Rename ufshcd_auto_hibern8_enable() into ufshcd_configure_auto_hibern8()
since this function can enable or disable auto-hibernation. Since
ufshcd_auto_hibern8_enable() is only used inside the UFSHCI driver core,
declare it static. Additionally, move the definition of this function to
just before its first caller.
Suggested-by: Bao D. Nguyen <quic_nguyenb@quicinc.com>
Reviewed-by: Bao D. Nguyen <quic_nguyenb@quicinc.com>
Reviewed-by: Can Guo <quic_cang@quicinc.com>
Cc: Avri Altman <avri.altman@wdc.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20231214192416.3638077-2-bvanassche@acm.org
Reviewed-by: Peter Wang <peter.wang@mediatek.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
While cleaning up the code to use ufshcd_rmwl() helper, the ESI vector mask
was changed incorrectly. Fix it and also define a proper macro for the
value together with FIELD_PREP().
Reported-by: Andrew Halaney <ahalaney@redhat.com>
Fixes: 0e9f4375db ("scsi: ufs: qcom: Use ufshcd_rmwl() where applicable")
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20231214125532.55109-1-manivannan.sadhasivam@linaro.org
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Commit fa3dca8251 ("scsi: ufs: host: Rename structure ufs_dev_params
to ufs_host_params") inadvertently introduced a comment line without
'*' prefix. Format the comment section correctly.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202312171915.YhlTLvLL-lkp@intel.com/
Fixes: fa3dca8251 ("scsi: ufs: host: Rename structure ufs_dev_params to ufs_host_params")
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Bean Huo <beanhuo@iokpp.de> says:
Adding RTC support for embedded storage device UFS in its driver, it
is important for a few key reasons:
1. Helps with Regular Maintenance:
The RTC provides a basic way to keep track of time, making it useful for
scheduling routine maintenance tasks in the storage device. This includes
things like making sure data is spread
evenly across the storage to extend its life.
2. Figuring Out How Old Data Is:
The RTC helps the device estimate how long ago certain parts of the storage
were last used. This is handy for deciding when to do maintenance tasks to
keep the storage working well over time.
3. Making Devices Last Longer:
By using the RTC for regular upkeep, we can make sure the storage device lasts
longer and stays reliable. This is especially important for devices that need
to work well for a long time.
4.Fitting In with Other Devices:
The inclusion of RTC support aligns with existing UFS specifications (starting
from UFS Spec 2.0) and is consistent with the prevalent industry practice. Many
UFS devices currently on the market utilize RTC for internal timekeeping. By
ensuring compatibility with this widely adopted standard, the embedded storage
device becomes seamlessly integrable with existing hardware and software
ecosystems, reducing the risk of compatibility issues.
In short, adding RTC support to embedded storage device UFS helps with regular
upkeep, extends the device's life, ensures compatibility, and keeps everything
running smoothly with the rest of the system.
Link: https://lore.kernel.org/r/20231212220825.85255-1-beanhuo@iokpp.de
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Introduce a sysfs node named 'rtc_update_ms' within the kernel, enabling
user to adjust the RTC periodic update frequency to suit the specific
requirements of the system and UFS. Also, this patch allows the user to
disable/enable periodic update RTC in the UFS idle time.
Signed-off-by: Bean Huo <beanhuo@micron.com>
Link: https://lore.kernel.org/r/20231212220825.85255-4-beanhuo@iokpp.de
Acked-by: Avri Altman <avri.altman@wdc.com>
Reviewed-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Add Real Time Clock (RTC) support for UFS device. This enhancement is
crucial for the internal maintenance operations of the UFS device. The
patch enables the device to handle both absolute and relative time
information. Furthermore, it includes periodic task to update the RTC in
accordance with the UFS Spec, ensuring the accuracy of RTC information for
the device's internal processes.
RTC and qTimestamp serve distinct purposes. The RTC provides a coarse level
of granularity with, at best, approximate single-second resolution. This
makes the RTC well-suited for the device to determine the approximate age
of programmed blocks after being updated by the host. On the other hand,
qTimestamp offers nanosecond granularity and is specifically designed for
synchronizing Device Error Log entries with corresponding host-side logs.
Given that the RTC has been a standard feature since UFS Spec 2.0, and
qTimestamp was introduced in UFS Spec 4.0, the majority of UFS devices
currently on the market rely on RTC. Therefore, it is advisable to continue
supporting RTC in the Linux kernel. This ensures compatibility with the
prevailing UFS device implementations and facilitates seamless integration
with existing hardware. By maintaining support for RTC, we ensure broad
compatibility and avoid potential issues arising from deviations in device
specifications across different UFS versions.
Signed-off-by: Bean Huo <beanhuo@micron.com>
Signed-off-by: Mike Bi <mikebi@micron.com>
Signed-off-by: Luca Porzio <lporzio@micron.com>
Link: https://lore.kernel.org/r/20231212220825.85255-3-beanhuo@iokpp.de
Acked-by: Avri Altman <avri.altman@wdc.com>
Reviewed-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Add helper inline for retrieving whether UFS device is busy or not.
Signed-off-by: Bean Huo <beanhuo@micron.com>
Link: https://lore.kernel.org/r/20231212220825.85255-2-beanhuo@iokpp.de
Reviewed-by: Avri Altman <avri.altman@wdc.com>
Reviewed-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> says:
Hello,
This series has code some cleanups to the Qcom UFS driver. No
functional change. In this version, I've removed code supporting
legacy controllers ver < 2.0, as the respective platforms were never
supported in upstream.
Tested on: RB5 development board based on Qcom SM8250 SoC.
Link: https://lore.kernel.org/r/20231208065902.11006-1-manivannan.sadhasivam@linaro.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Instead of using both ufshcd_readl() and ufshcd_writel() to read/modify/
write a register, let's make use of the existing helper.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20231208065902.11006-17-manivannan.sadhasivam@linaro.org
Tested-by: Andrew Halaney <ahalaney@redhat.com> # sa8775p-ride
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The legacy platforms making use of host controllers older than version 2.0
are not supported in upstream. So there is no need to carry code to support
them.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20231208065902.11006-16-manivannan.sadhasivam@linaro.org
Tested-by: Andrew Halaney <ahalaney@redhat.com> # sa8775p-ride
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
In both the functions, UFS_PHY_SOFT_RESET contains the mask of the reset
bit. So this can be passed directly as the value to be written for
asserting the reset. For deasserting, 0 can be passed.
This gets rid of the FIELD_PREP() inside these functions and also
UFS_PHY_RESET_{ENABLE/DISABLE} definitions.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20231208065902.11006-15-manivannan.sadhasivam@linaro.org
Reviewed-by: Andrew Halaney <ahalaney@redhat.com>
Tested-by: Andrew Halaney <ahalaney@redhat.com> # sa8775p-ride
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
In case the "core_clk_unipro" clock is not provided, "cycles_in_1us"
variable will be used as uninitialized. So initialize it with 0.
Issue reported by Smatch tool:
drivers/ufs/host/ufs-qcom.c:1336 ufs_qcom_set_core_clk_ctrl() error: uninitialized symbol 'cycles_in_1us'.
drivers/ufs/host/ufs-qcom.c:1341 ufs_qcom_set_core_clk_ctrl() error: uninitialized symbol 'cycles_in_1us'.
Reviewed-by: Nitin Rawat <quic_nitirawa@quicinc.com>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20231208065902.11006-14-manivannan.sadhasivam@linaro.org
Tested-by: Andrew Halaney <ahalaney@redhat.com> # sa8775p-ride
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
ufs_qcom_hosts array is assigned, but not used anywhere. So let's remove
it.
Reviewed-by: Andrew Halaney <ahalaney@redhat.com>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20231208065902.11006-12-manivannan.sadhasivam@linaro.org
Tested-by: Andrew Halaney <ahalaney@redhat.com> # sa8775p-ride
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
As done in other places, let's use dev_err_probe() to simplify the error
handling while acquiring the device reset gpio using
devm_gpiod_get_optional().
While at it, let's reword the error message to make it clear that the
failure is due to acquiring "device reset gpio".
Reviewed-by: Andrew Halaney <ahalaney@redhat.com>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20231208065902.11006-11-manivannan.sadhasivam@linaro.org
Tested-by: Andrew Halaney <ahalaney@redhat.com> # sa8775p-ride
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
devm_kzalloc() will itself print the error message on failure. So let's get
rid of the redundant error message in ufs_qcom_init().
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20231208065902.11006-10-manivannan.sadhasivam@linaro.org
Reviewed-by: Nitin Rawat <quic_nitirawa@quicinc.com>
Tested-by: Andrew Halaney <ahalaney@redhat.com> # sa8775p-ride
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
If ufs_qcom_power_up_sequence() fails, then it makes no sense to enable the
lane clocks and continue ufshcd_hba_enable(). So let's check the return
value of ufs_qcom_power_up_sequence().
Reviewed-by: Andrew Halaney <ahalaney@redhat.com>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20231208065902.11006-9-manivannan.sadhasivam@linaro.org
Tested-by: Andrew Halaney <ahalaney@redhat.com> # sa8775p-ride
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Even though core_reset is optional, a failure during assert/deassert should
be considered fatal, if core_reset is available. So fail
ufs_qcom_power_up_sequence() if an error happens during reset and also get
rid of the redundant warning as the ufs_qcom_host_reset() function itself
prints error messages.
Reviewed-by: Andrew Halaney <ahalaney@redhat.com>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20231208065902.11006-8-manivannan.sadhasivam@linaro.org
Tested-by: Andrew Halaney <ahalaney@redhat.com> # sa8775p-ride
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Instead of duplicating the enable/disable IRQ part, let's export the
helpers available in ufshcd driver and make use of them. This also fixes
the possible redundant IRQ disable before asserting reset (when IRQ was
already disabled).
Fixes: 4a791574a0 ("scsi: ufs: ufs-qcom: Disable interrupt in reset path")
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20231208065902.11006-7-manivannan.sadhasivam@linaro.org
Tested-by: Andrew Halaney <ahalaney@redhat.com> # sa8775p-ride
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
core_reset is optional, so there is no need to warn the user if it is not
available.
Reviewed-by: Andrew Halaney <ahalaney@redhat.com>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20231208065902.11006-6-manivannan.sadhasivam@linaro.org
Tested-by: Andrew Halaney <ahalaney@redhat.com> # sa8775p-ride
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
There are many instances where the variable assignments are not needed.
Remove them.
Reviewed-by: Andrew Halaney <ahalaney@redhat.com>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20231208065902.11006-5-manivannan.sadhasivam@linaro.org
Tested-by: Andrew Halaney <ahalaney@redhat.com> # sa8775p-ride
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The return value should be -ENODEV indicating that the resource is not
provided in DT, not -ENOMEM. Fix it!
Fixes: c263b4ef73 ("scsi: ufs: core: mcq: Configure resource regions")
Reviewed-by: Andrew Halaney <ahalaney@redhat.com>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20231208065902.11006-4-manivannan.sadhasivam@linaro.org
Tested-by: Andrew Halaney <ahalaney@redhat.com> # sa8775p-ride
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Currently, the function returns -EINVAL if algorithm other than AES-256-XTS
is requested. But the correct error code is -EOPNOTSUPP. Fix it!
Cc: Abel Vesa <abel.vesa@linaro.org>
Fixes: 56541c7c44 ("scsi: ufs: ufs-qcom: Switch to the new ICE API")
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20231208065902.11006-3-manivannan.sadhasivam@linaro.org
Tested-by: Andrew Halaney <ahalaney@redhat.com> # sa8775p-ride
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Bart Van Assche