commit e8c276d4dc upstream.
smatch warning:
drivers/misc/fastrpc.c:1926 fastrpc_req_mmap() error: double free of 'buf'
In fastrpc_req_mmap() error path, the fastrpc buffer is freed in
fastrpc_req_munmap_impl() if unmap is successful.
But in the end, there is an unconditional call to fastrpc_buf_free().
So the above case triggers the double free of fastrpc buf.
Fixes: 72fa6f7820 ("misc: fastrpc: Rework fastrpc_req_munmap")
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Reviewed-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Sukrut Bellary <sukrut.bellary@linux.com>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Cc: stable <stable@kernel.org>
Link: https://lore.kernel.org/r/20240902141409.70371-2-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit de3d7969f6 upstream.
The Partner PD Revision field in GET_CONNECTOR_CAPABILITY
data structure was introduced in UCSI v2.1. In
ucsi_check_connector_capability() the version was assumed to
be 2.0, and in ucsi_register_partner() the field is accessed
completely unconditionally.
Fixing the version in ucsi_check_connector_capability(), and
replacing the unconditional pd_revision assignment with a
direct call to ucsi_check_connector_capability() in
ucsi_register_port(). After this the revision is also
checked only if there is a PD contract.
Fixes: b9fccfdb4e ("usb: typec: ucsi: Get PD revision for partner")
Cc: stable@vger.kernel.org
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20240830111645.2134301-1-heikki.krogerus@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 00dcf2fa44 upstream.
When operating in High-Speed, it is observed that DSTS[USBLNKST] doesn't
update link state immediately after receiving the wakeup interrupt. Since
wakeup event handler calls the resume callbacks, there is a chance that
function drivers can perform an ep queue, which in turn tries to perform
remote wakeup from send_gadget_ep_cmd(STARTXFER). This happens because
DSTS[[21:18] wasn't updated to U0 yet, it's observed that the latency of
DSTS can be in order of milli-seconds. Hence avoid calling gadget_wakeup
during startxfer to prevent unnecessarily issuing remote wakeup to host.
Fixes: c36d8e947a ("usb: dwc3: gadget: put link to U0 before Start Transfer")
Cc: stable@vger.kernel.org
Suggested-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Signed-off-by: Prashanth K <quic_prashk@quicinc.com>
Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://lore.kernel.org/r/20240828064302.3796315-1-quic_prashk@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 9149c9b0c7 upstream.
This fix addresses STAR 9001285599, which only affects DWC_usb3 version
3.20a. The timer value for PM_LC_TIMER in DWC_usb3 3.20a for the Link
ECN changes is incorrect. If the PM TIMER ECN is enabled via GUCTL2[19],
the link compliance test (TD7.21) may fail. If the ECN is not enabled
(GUCTL2[19] = 0), the controller will use the old timer value (5us),
which is still acceptable for the link compliance test. Therefore, clear
GUCTL2[19] to pass the USB link compliance test: TD 7.21.
Cc: stable@vger.kernel.org
Signed-off-by: Faisal Hassan <quic_faisalh@quicinc.com>
Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://lore.kernel.org/r/20240829094502.26502-1-quic_faisalh@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 61cbfb5368 upstream.
The cfg pointer is set before reading the channel number that the
configuration should point to. This causes configurations to be shifted
by one channel.
For example setting bipolar to the first channel defined in the DT will
cause bipolar mode to be active on the second defined channel.
Fix by moving the cfg pointer setting after reading the channel number.
Fixes: 7b8d045e49 ("iio: adc: ad7124: allow more than 8 channels")
Signed-off-by: Dumitru Ceclan <dumitru.ceclan@analog.com>
Reviewed-by: Nuno Sa <nuno.sa@analog.com>
Link: https://patch.msgid.link/20240806085133.114547-1-dumitru.ceclan@analog.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 96f9ab0d59 upstream.
The ad7124_soft_reset() function has the assumption that the chip will
assert the "power-on reset" bit in the STATUS register after a software
reset without any delay. The POR bit =0 is used to check if the chip
initialization is done.
A chip ID mismatch probe error appears intermittently when the probe
continues too soon and the ID register does not contain the expected
value.
Fix by adding a 200us delay after the software reset command is issued.
Fixes: b3af341bbd ("iio: adc: Add ad7124 support")
Signed-off-by: Dumitru Ceclan <dumitru.ceclan@analog.com>
Reviewed-by: Nuno Sa <nuno.sa@analog.com>
Link: https://patch.msgid.link/20240731-ad7124-fix-v1-1-46a76aa4b9be@analog.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e81bb580ec upstream.
With commit 7b0c9f8fa3 ("iio: adc: ad_sigma_delta: Add optional irq
selection"), we can get the irq line from struct ad_sigma_delta_info
instead of the spi device. However, in devm_ad_sd_probe_trigger(), when
getting the irq_flags with irq_get_trigger_type() we are still using
the spi device irq instead of the one used for devm_request_irq().
Fixes: 7b0c9f8fa3 ("iio: adc: ad_sigma_delta: Add optional irq selection")
Signed-off-by: Nuno Sa <nuno.sa@analog.com>
Link: https://patch.msgid.link/20240806-dev-fix-ad-sigma-delta-v1-1-aa25b173c063@analog.com
Cc: <stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 90826e0846 upstream.
The current implementation attempts to recover from an eventual glitch
in the clock by checking frstdata state after reading the first
channel's sample: If frstdata is low, it will reset the chip and
return -EIO.
This will only work in parallel mode, where frstdata pin is set low
after the 2nd sample read starts.
For the serial mode, according to the datasheet, "The FRSTDATA output
returns to a logic low following the 16th SCLK falling edge.", thus
after the Xth pulse, X being the number of bits in a sample, the check
will always be true, and the driver will not work at all in serial
mode if frstdata(optional) is defined in the devicetree as it will
reset the chip, and return -EIO every time read_sample is called.
Hence, this check must be removed for serial mode.
Fixes: b9618c0cac ("staging: IIO: ADC: New driver for AD7606/AD7606-6/AD7606-4")
Signed-off-by: Guillaume Stols <gstols@baylibre.com>
Reviewed-by: Nuno Sa <nuno.sa@analog.com>
Link: https://patch.msgid.link/20240702-cleanup-ad7606-v3-1-18d5ea18770e@baylibre.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 2f6b92d0f6 upstream.
The ad7124_find_similar_live_cfg() computes the compare size by
substracting the address of the cfg struct from the address of the live
field. Because the live field is the first field in the struct, the
result is 0.
Also, the memcmp() call is made from the start of the cfg struct, which
includes the live and cfg_slot fields, which are not relevant for the
comparison.
Fix by grouping the relevant fields with struct_group() and use the
size of the group to compute the compare size; make the memcmp() call
from the address of the group.
Fixes: 7b8d045e49 ("iio: adc: ad7124: allow more than 8 channels")
Signed-off-by: Dumitru Ceclan <dumitru.ceclan@analog.com>
Reviewed-by: Nuno Sa <nuno.sa@analog.com>
Link: https://patch.msgid.link/20240731-ad7124-fix-v1-2-46a76aa4b9be@analog.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 0a3b517c80 upstream.
Interrupt status read seems to be broken on some old MPU-6050 like
chips. Fix by reverting to previous driver behavior bypassing interrupt
status read. This is working because these chips are not supporting
WoM and data ready is the only interrupt source.
Fixes: 5537f653d9 ("iio: imu: inv_mpu6050: add new interrupt handler for WoM events")
Cc: stable@vger.kernel.org
Signed-off-by: Jean-Baptiste Maneyrol <jean-baptiste.maneyrol@tdk.com>
Tested-by: Svyatoslav Ryhel <clamor95@gmail.com> # LG P895
Tested-by: Andreas Westman Dorcsak <hedmoo@yahoo.com> # LG P880
Link: https://patch.msgid.link/20240814143735.327302-1-inv.git-commit@tdk.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8a3dcc970d upstream.
When the scale_type is IIO_VAL_INT_PLUS_MICRO or IIO_VAL_INT_PLUS_NANO
the scale passed as argument is only applied to the fractional part of
the value. Fix it by also multiplying the integer part by the scale
provided.
Fixes: 48e44ce0f8 ("iio:inkern: Add function to read the processed value")
Signed-off-by: Matteo Martelli <matteomartelli3@gmail.com>
Link: https://patch.msgid.link/20240730-iio-fix-scale-v1-1-6246638c8daa@gmail.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 84c65d8008 upstream.
If dma_get_slave_caps() fails, we need to release the dma channel before
returning an error to avoid leaking the channel.
Fixes: 2d6ca60f32 ("iio: Add a DMAengine framework based buffer")
Signed-off-by: David Lechner <dlechner@baylibre.com>
Link: https://patch.msgid.link/20240723-iio-fix-dmaengine-free-on-error-v1-1-2c7cbc9b92ff@baylibre.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b48aa99175 upstream.
In ad9834_write_frequency() clk_get_rate() can return 0. In such case
ad9834_calc_freqreg() call will lead to division by zero. Checking
'if (fout > (clk_freq / 2))' doesn't protect in case of 'fout' is 0.
ad9834_write_frequency() is called from ad9834_write(), where fout is
taken from text buffer, which can contain any value.
Modify parameters checking.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: 12b9d5bf76 ("Staging: IIO: DDS: AD9833 / AD9834 driver")
Suggested-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Aleksandr Mishin <amishin@t-argos.ru>
Reviewed-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://patch.msgid.link/20240703154506.25584-1-amishin@t-argos.ru
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c166829268 upstream.
The 'Fixes' commit recently changed the behaviour of TCP by skipping the
processing of the 3rd ACK when a sk->sk_socket is set. The goal was to
skip tcp_ack_snd_check() in tcp_rcv_state_process() not to send an
unnecessary ACK in case of simultaneous connect(). Unfortunately, that
had an impact on TFO and MPTCP.
I started to look at the impact on MPTCP, because the MPTCP CI found
some issues with the MPTCP Packetdrill tests [1]. Then Paolo Abeni
suggested me to look at the impact on TFO with "plain" TCP.
For MPTCP, when receiving the 3rd ACK of a request adding a new path
(MP_JOIN), sk->sk_socket will be set, and point to the MPTCP sock that
has been created when the MPTCP connection got established before with
the first path. The newly added 'goto' will then skip the processing of
the segment text (step 7) and not go through tcp_data_queue() where the
MPTCP options are validated, and some actions are triggered, e.g.
sending the MPJ 4th ACK [2] as demonstrated by the new errors when
running a packetdrill test [3] establishing a second subflow.
This doesn't fully break MPTCP, mainly the 4th MPJ ACK that will be
delayed. Still, we don't want to have this behaviour as it delays the
switch to the fully established mode, and invalid MPTCP options in this
3rd ACK will not be caught any more. This modification also affects the
MPTCP + TFO feature as well, and being the reason why the selftests
started to be unstable the last few days [4].
For TFO, the existing 'basic-cookie-not-reqd' test [5] was no longer
passing: if the 3rd ACK contains data, and the connection is accept()ed
before receiving them, these data would no longer be processed, and thus
not ACKed.
One last thing about MPTCP, in case of simultaneous connect(), a
fallback to TCP will be done, which seems fine:
`../common/defaults.sh`
0 socket(..., SOCK_STREAM|SOCK_NONBLOCK, IPPROTO_MPTCP) = 3
+0 connect(3, ..., ...) = -1 EINPROGRESS (Operation now in progress)
+0 > S 0:0(0) <mss 1460, sackOK, TS val 100 ecr 0, nop, wscale 8, mpcapable v1 flags[flag_h] nokey>
+0 < S 0:0(0) win 1000 <mss 1460, sackOK, TS val 407 ecr 0, nop, wscale 8, mpcapable v1 flags[flag_h] nokey>
+0 > S. 0:0(0) ack 1 <mss 1460, sackOK, TS val 330 ecr 0, nop, wscale 8, mpcapable v1 flags[flag_h] nokey>
+0 < S. 0:0(0) ack 1 win 65535 <mss 1460, sackOK, TS val 700 ecr 100, nop, wscale 8, mpcapable v1 flags[flag_h] key[skey=2]>
+0 > . 1:1(0) ack 1 <nop, nop, TS val 845707014 ecr 700, nop, nop, sack 0:1>
Simultaneous SYN-data crossing is also not supported by TFO, see [6].
Kuniyuki Iwashima suggested to restrict the processing to SYN+ACK only:
that's a more generic solution than the one initially proposed, and
also enough to fix the issues described above.
Later on, Eric Dumazet mentioned that an ACK should still be sent in
reaction to the second SYN+ACK that is received: not sending a DUPACK
here seems wrong and could hurt:
0 socket(..., SOCK_STREAM|SOCK_NONBLOCK, IPPROTO_TCP) = 3
+0 connect(3, ..., ...) = -1 EINPROGRESS (Operation now in progress)
+0 > S 0:0(0) <mss 1460, sackOK, TS val 1000 ecr 0,nop,wscale 8>
+0 < S 0:0(0) win 1000 <mss 1000, sackOK, nop, nop>
+0 > S. 0:0(0) ack 1 <mss 1460, sackOK, TS val 3308134035 ecr 0,nop,wscale 8>
+0 < S. 0:0(0) ack 1 win 1000 <mss 1000, sackOK, nop, nop>
+0 > . 1:1(0) ack 1 <nop, nop, sack 0:1> // <== Here
So in this version, the 'goto consume' is dropped, to always send an ACK
when switching from TCP_SYN_RECV to TCP_ESTABLISHED. This ACK will be
seen as a DUPACK -- with DSACK if SACK has been negotiated -- in case of
simultaneous SYN crossing: that's what is expected here.
Link: https://github.com/multipath-tcp/mptcp_net-next/actions/runs/9936227696 [1]
Link: https://datatracker.ietf.org/doc/html/rfc8684#fig_tokens [2]
Link: https://github.com/multipath-tcp/packetdrill/blob/mptcp-net-next/gtests/net/mptcp/syscalls/accept.pkt#L28 [3]
Link: https://netdev.bots.linux.dev/contest.html?executor=vmksft-mptcp-dbg&test=mptcp-connect-sh [4]
Link: https://github.com/google/packetdrill/blob/master/gtests/net/tcp/fastopen/server/basic-cookie-not-reqd.pkt#L21 [5]
Link: https://github.com/google/packetdrill/blob/master/gtests/net/tcp/fastopen/client/simultaneous-fast-open.pkt [6]
Fixes: 23e89e8ee7 ("tcp: Don't drop SYN+ACK for simultaneous connect().")
Suggested-by: Paolo Abeni <pabeni@redhat.com>
Suggested-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Suggested-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20240724-upstream-net-next-20240716-tcp-3rd-ack-consume-sk_socket-v3-1-d48339764ce9@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8d42877ad6 upstream.
Avoid copying when we failed to, or didn't have any mounts to list.
Fixes: cb54ef4f05 ("fs: don't copy to userspace under namespace semaphore") # mainline only
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 6e4aa08fa9 ]
The retry loop for SRIOV reset have refcount and memory leak issue.
Depending on which function call fails it can potentially call
amdgpu_amdkfd_pre/post_reset different number of times and causes
kfd_locked count to be wrong. This will block all future attempts at
opening /dev/kfd. The retry loop also leakes resources by calling
amdgpu_virt_init_data_exchange multiple times without calling the
corresponding fini function.
Align with the bare-metal reset path which doesn't have these issues.
This means taking the amdgpu_amdkfd_pre/post_reset functions out of the
reset loop and calling amdgpu_device_pre_asic_reset each retry which
properly free the resources from previous try by calling
amdgpu_virt_fini_data_exchange.
Signed-off-by: Yunxiang Li <Yunxiang.Li@amd.com>
Reviewed-by: Emily Deng <Emily.Deng@amd.com>
Reviewed-by: Zhigang Luo <zhigang.luo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 25c01191c2 ]
There are other reset sources that pass NULL as the job pointer, such as
amdgpu_amdkfd_reset_work. Therefore, using the job pointer to check if
the FLR comes from the host does not work.
Add a flag in reset_context to explicitly mark host triggered reset, and
set this flag when we receive host reset notification.
Signed-off-by: Yunxiang Li <Yunxiang.Li@amd.com>
Reviewed-by: Emily Deng <Emily.Deng@amd.com>
Reviewed-by: Zhigang Luo <zhigang.luo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Stable-dep-of: 6e4aa08fa9 ("drm/amdgpu: Fix amdgpu_device_reset_sriov retry logic")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f4322b9f8a ]
Some times a hang GPU causes multiple reset sources to schedule resets.
The second source will be able to trigger an unnecessary reset if they
schedule after we call amdgpu_device_stop_pending_resets.
Move amdgpu_device_stop_pending_resets to after the reset is done. Since
at this point the GPU is supposedly in a good state, any reset scheduled
after this point would be a legitimate reset.
Remove unnecessary and incorrect checks for amdgpu_in_reset that was
kinda serving this purpose.
Signed-off-by: Yunxiang Li <Yunxiang.Li@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Stable-dep-of: 6e4aa08fa9 ("drm/amdgpu: Fix amdgpu_device_reset_sriov retry logic")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4e8771a366 ]
null-ptr-deref will occur when (req_op_level == SMB2_OPLOCK_LEVEL_LEASE)
and parse_lease_state() return NULL.
Fix this by check if 'lease_ctx_info' is NULL.
Additionally, remove the redundant parentheses in
parse_durable_handle_context().
Signed-off-by: ChenXiaoSong <chenxiaosong@kylinos.cn>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d4bc0a264f ]
The overflow/underflow conditions in pata_macio_qc_prep() should never
happen. But if they do there's no need to kill the system entirely, a
WARN and failing the IO request should be sufficient and might allow the
system to keep running.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 783bf5d09f ]
Referring to the errata ERR051608 of I.MX93, LPSPI TCR[PRESCALE]
can only be configured to be 0 or 1, other values are not valid
and will cause LPSPI to not work.
Add the prescale limitation for LPSPI in I.MX93. Other platforms
are not affected.
Signed-off-by: Carlos Song <carlos.song@nxp.com>
Link: https://patch.msgid.link/20240820070658.672127-1-carlos.song@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 50f2b98dc8 ]
This avoids warning:
[ 0.118053] BUG: sleeping function called from invalid context at kernel/locking/mutex.c:283
Caused by get_c0_compare_int on secondary CPU.
We also skipped saving IRQ number to struct clock_event_device *cd as
it's never used by clockevent core, as per comments it's only meant
for "non CPU local devices".
Reported-by: Serge Semin <fancer.lancer@gmail.com>
Closes: https://lore.kernel.org/linux-mips/6szkkqxpsw26zajwysdrwplpjvhl5abpnmxgu2xuj3dkzjnvsf@4daqrz4mf44k/
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Serge Semin <fancer.lancer@gmail.com>
Tested-by: Serge Semin <fancer.lancer@gmail.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 92e9bac181 ]
The 'device_name' array doesn't exist out of the
'overflow_allocation_test' function scope. However, it is being used as
a driver name when calling 'kunit_driver_create' from
'kunit_device_register'. It produces the kernel panic with KASAN
enabled.
Since this variable is used in one place only, remove it and pass the
device name into kunit_device_register directly as an ascii string.
Signed-off-by: Ivan Orlov <ivan.orlov0322@gmail.com>
Reviewed-by: David Gow <davidgow@google.com>
Link: https://lore.kernel.org/r/20240815000431.401869-1-ivan.orlov0322@gmail.com
Signed-off-by: Kees Cook <kees@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 86db7bfb06 ]
When query reg inf of SSU, it loops tnl_num times. However, tnl_num comes
from hardware and the length of array is a fixed value. To void array out
of bound, make sure the loop time is not greater than the length of array
Signed-off-by: Peiyang Wang <wangpeiyang1@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b2f11c6f3e ]
If we need to increase the tree depth, allocate a new node, and then
race with another thread that increased the tree depth before us, we'll
still have a preallocated node that might be used later.
If we then use that node for a new non-root node, it'll still have a
pointer to the old root instead of being zeroed - fix this by zeroing it
in the cmpxchg failure path.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b739dffa5d ]
When of_irq_parse_raw() is invoked with a device address smaller than
the interrupt parent node (from #address-cells property), KASAN detects
the following out-of-bounds read when populating the initial match table
(dyndbg="func of_irq_parse_* +p"):
OF: of_irq_parse_one: dev=/soc@0/picasso/watchdog, index=0
OF: parent=/soc@0/pci@878000000000/gpio0@17,0, intsize=2
OF: intspec=4
OF: of_irq_parse_raw: ipar=/soc@0/pci@878000000000/gpio0@17,0, size=2
OF: -> addrsize=3
==================================================================
BUG: KASAN: slab-out-of-bounds in of_irq_parse_raw+0x2b8/0x8d0
Read of size 4 at addr ffffff81beca5608 by task bash/764
CPU: 1 PID: 764 Comm: bash Tainted: G O 6.1.67-484c613561-nokia_sm_arm64 #1
Hardware name: Unknown Unknown Product/Unknown Product, BIOS 2023.01-12.24.03-dirty 01/01/2023
Call trace:
dump_backtrace+0xdc/0x130
show_stack+0x1c/0x30
dump_stack_lvl+0x6c/0x84
print_report+0x150/0x448
kasan_report+0x98/0x140
__asan_load4+0x78/0xa0
of_irq_parse_raw+0x2b8/0x8d0
of_irq_parse_one+0x24c/0x270
parse_interrupts+0xc0/0x120
of_fwnode_add_links+0x100/0x2d0
fw_devlink_parse_fwtree+0x64/0xc0
device_add+0xb38/0xc30
of_device_add+0x64/0x90
of_platform_device_create_pdata+0xd0/0x170
of_platform_bus_create+0x244/0x600
of_platform_notify+0x1b0/0x254
blocking_notifier_call_chain+0x9c/0xd0
__of_changeset_entry_notify+0x1b8/0x230
__of_changeset_apply_notify+0x54/0xe4
of_overlay_fdt_apply+0xc04/0xd94
...
The buggy address belongs to the object at ffffff81beca5600
which belongs to the cache kmalloc-128 of size 128
The buggy address is located 8 bytes inside of
128-byte region [ffffff81beca5600, ffffff81beca5680)
The buggy address belongs to the physical page:
page:00000000230d3d03 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x1beca4
head:00000000230d3d03 order:1 compound_mapcount:0 compound_pincount:0
flags: 0x8000000000010200(slab|head|zone=2)
raw: 8000000000010200 0000000000000000 dead000000000122 ffffff810000c300
raw: 0000000000000000 0000000000200020 00000001ffffffff 0000000000000000
page dumped because: kasan: bad access detected
Memory state around the buggy address:
ffffff81beca5500: 04 fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
ffffff81beca5580: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
>ffffff81beca5600: 00 fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
^
ffffff81beca5680: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
ffffff81beca5700: 00 00 00 00 00 00 fc fc fc fc fc fc fc fc fc fc
==================================================================
OF: -> got it !
Prevent the out-of-bounds read by copying the device address into a
buffer of sufficient size.
Signed-off-by: Stefan Wiehler <stefan.wiehler@nokia.com>
Link: https://lore.kernel.org/r/20240812100652.3800963-1-stefan.wiehler@nokia.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 810ee43d9c ]
Syzkiller reports a "KMSAN: uninit-value in pick_link" bug.
This is caused by an uninitialised page, which is ultimately caused
by a corrupted symbolic link size read from disk.
The reason why the corrupted symlink size causes an uninitialised
page is due to the following sequence of events:
1. squashfs_read_inode() is called to read the symbolic
link from disk. This assigns the corrupted value
3875536935 to inode->i_size.
2. Later squashfs_symlink_read_folio() is called, which assigns
this corrupted value to the length variable, which being a
signed int, overflows producing a negative number.
3. The following loop that fills in the page contents checks that
the copied bytes is less than length, which being negative means
the loop is skipped, producing an uninitialised page.
This patch adds a sanity check which checks that the symbolic
link size is not larger than expected.
--
Signed-off-by: Phillip Lougher <phillip@squashfs.org.uk>
Link: https://lore.kernel.org/r/20240811232821.13903-1-phillip@squashfs.org.uk
Reported-by: Lizhi Xu <lizhi.xu@windriver.com>
Reported-by: syzbot+24ac24ff58dc5b0d26b9@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/all/000000000000a90e8c061e86a76b@google.com/
V2: fix spelling mistake.
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e5876b088b ]
ipheth_sndbulk_callback() can submit carrier_work
as a part of its error handling. That means that
the driver must make sure that the work is cancelled
after it has made sure that no more URB can terminate
with an error condition.
Hence the order of actions in ipheth_close() needs
to be inverted.
Signed-off-by: Oliver Neukum <oneukum@suse.com>
Signed-off-by: Foster Snowhill <forst@pen.gy>
Tested-by: Georgi Valkov <gvalkov@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 206f533a0a ]
From: Dmitry Torokhov <dmitry.torokhov@gmail.com>
When exercising uinput interface syzkaller may try setting up device
with a really large number of slots, which causes memory allocation
failure in input_mt_init_slots(). While this allocation failure is
handled properly and request is rejected, it results in syzkaller
reports. Additionally, such request may put undue burden on the
system which will try to free a lot of memory for a bogus request.
Fix it by limiting allowed number of slots to 100. This can easily
be extended if we see devices that can track more than 100 contacts.
Reported-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Reported-by: syzbot <syzbot+0122fa359a69694395d5@syzkaller.appspotmail.com>
Closes: https://syzkaller.appspot.com/bug?extid=0122fa359a69694395d5
Link: https://lore.kernel.org/r/Zqgi7NYEbpRsJfa2@google.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a6e9c391d4 ]
report_fixup for the Cougar 500k Gaming Keyboard was not verifying
that the report descriptor size was correct before accessing it
Reported-by: syzbot+24c0361074799d02c452@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=24c0361074799d02c452
Signed-off-by: Camila Alvarez <cam.alvarez.i@gmail.com>
Reviewed-by: Silvan Jegen <s.jegen@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b8e947e9f6 ]
Some arch + compiler combinations report a potentially unused variable
location in btrfs_lookup_dentry(). This is a false alert as the variable
is passed by value and always valid or there's an error. The compilers
cannot probably reason about that although btrfs_inode_by_name() is in
the same file.
> + /kisskb/src/fs/btrfs/inode.c: error: 'location.objectid' may be used
+uninitialized in this function [-Werror=maybe-uninitialized]: => 5603:9
> + /kisskb/src/fs/btrfs/inode.c: error: 'location.type' may be used
+uninitialized in this function [-Werror=maybe-uninitialized]: => 5674:5
m68k-gcc8/m68k-allmodconfig
mips-gcc8/mips-allmodconfig
powerpc-gcc5/powerpc-all{mod,yes}config
powerpc-gcc5/ppc64_defconfig
Initialize it to zero, this should fix the warnings and won't change the
behaviour as btrfs_inode_by_name() accepts only a root or inode item
types, otherwise returns an error.
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Tested-by: Geert Uytterhoeven <geert@linux-m68k.org>
Link: https://lore.kernel.org/linux-btrfs/bd4e9928-17b3-9257-8ba7-6b7f9bbb639a@linux-m68k.org/
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5127c42c77 ]
If the value of max_speed_hz is 0, it may cause a division by zero
error in hisi_calc_effective_speed().
The value of max_speed_hz is provided by firmware.
Firmware is generally considered as a trusted domain. However, as
division by zero errors can cause system failure, for defense measure,
the value of max_speed is validated here. So 0 is regarded as invalid
and an error code is returned.
Signed-off-by: Devyn Liu <liudingyuan@huawei.com>
Reviewed-by: Jay Fang <f.fangjian@huawei.com>
Link: https://patch.msgid.link/20240730032040.3156393-3-liudingyuan@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 291e4baf70 ]
Even if a vgem device is configured in, we will skip the import_vgem_fd()
test almost every time.
TAP version 13
1..11
# Testing heap: system
# =======================================
# Testing allocation and importing:
ok 1 # SKIP Could not open vgem -1
The problem is that we use the DRM_IOCTL_VERSION ioctl to query the driver
version information but leave the name field a non-null-terminated string.
Terminate it properly to actually test against the vgem device.
While at it, let's check the length of the driver name is exactly 4 bytes
and return early otherwise (in case there is a name like "vgemfoo" that
gets converted to "vgem\0" unexpectedly).
Signed-off-by: Zenghui Yu <yuzenghui@huawei.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20240729024604.2046-1-yuzenghui@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8a2be2f1db ]
Definitely condition dma_get_cache_alignment * defined value > 256
during driver initialization is not reason to BUG_ON(). Turn that to
graceful error out with -EINVAL.
Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Link: https://lore.kernel.org/r/20240628131559.502822-3-jarkko.nikula@linux.intel.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9bc7501b0b ]
According to I3C Spec 1.1.1, 11-Jun-2021, section: 5.1.2.2.3:
If the Controller chooses to start an I3C Message with an I3C Dynamic
Address, then special provisions shall be made because that same I3C Target
may be initiating an IBI or a Controller Role Request. So, one of three
things may happen: (skip 1, 2)
3. The Addresses match and the RnW bits also match, and so neither
Controller nor Target will ACK since both are expecting the other side to
provide ACK. As a result, each side might think it had "won" arbitration,
but neither side would continue, as each would subsequently see that the
other did not provide ACK.
...
For either value of RnW: Due to the NACK, the Controller shall defer the
Private Write or Private Read, and should typically transmit the Target
^^^^^^^^^^^^^^^^^^^
Address again after a Repeated START (i.e., the next one or any one prior
^^^^^^^^^^^^^
to a STOP in the Frame). Since the Address Header following a Repeated
START is not arbitrated, the Controller will always win (see Section
5.1.2.2.4).
Resend target address again if address is not 7E and controller get NACK.
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c3a5e3e872 ]
When using cachefiles, lockdep may emit something similar to the circular
locking dependency notice below. The problem appears to stem from the
following:
(1) Cachefiles manipulates xattrs on the files in its cache when called
from ->writepages().
(2) The setxattr() and removexattr() system call handlers get the name
(and value) from userspace after taking the sb_writers lock, putting
accesses of the vma->vm_lock and mm->mmap_lock inside of that.
(3) The afs filesystem uses a per-inode lock to prevent multiple
revalidation RPCs and in writeback vs truncate to prevent parallel
operations from deadlocking against the server on one side and local
page locks on the other.
Fix this by moving the getting of the name and value in {get,remove}xattr()
outside of the sb_writers lock. This also has the minor benefits that we
don't need to reget these in the event of a retry and we never try to take
the sb_writers lock in the event we can't pull the name and value into the
kernel.
Alternative approaches that might fix this include moving the dispatch of a
write to the cache off to a workqueue or trying to do without the
validation lock in afs. Note that this might also affect other filesystems
that use netfslib and/or cachefiles.
======================================================
WARNING: possible circular locking dependency detected
6.10.0-build2+ #956 Not tainted
------------------------------------------------------
fsstress/6050 is trying to acquire lock:
ffff888138fd82f0 (mapping.invalidate_lock#3){++++}-{3:3}, at: filemap_fault+0x26e/0x8b0
but task is already holding lock:
ffff888113f26d18 (&vma->vm_lock->lock){++++}-{3:3}, at: lock_vma_under_rcu+0x165/0x250
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
-> #4 (&vma->vm_lock->lock){++++}-{3:3}:
__lock_acquire+0xaf0/0xd80
lock_acquire.part.0+0x103/0x280
down_write+0x3b/0x50
vma_start_write+0x6b/0xa0
vma_link+0xcc/0x140
insert_vm_struct+0xb7/0xf0
alloc_bprm+0x2c1/0x390
kernel_execve+0x65/0x1a0
call_usermodehelper_exec_async+0x14d/0x190
ret_from_fork+0x24/0x40
ret_from_fork_asm+0x1a/0x30
-> #3 (&mm->mmap_lock){++++}-{3:3}:
__lock_acquire+0xaf0/0xd80
lock_acquire.part.0+0x103/0x280
__might_fault+0x7c/0xb0
strncpy_from_user+0x25/0x160
removexattr+0x7f/0x100
__do_sys_fremovexattr+0x7e/0xb0
do_syscall_64+0x9f/0x100
entry_SYSCALL_64_after_hwframe+0x76/0x7e
-> #2 (sb_writers#14){.+.+}-{0:0}:
__lock_acquire+0xaf0/0xd80
lock_acquire.part.0+0x103/0x280
percpu_down_read+0x3c/0x90
vfs_iocb_iter_write+0xe9/0x1d0
__cachefiles_write+0x367/0x430
cachefiles_issue_write+0x299/0x2f0
netfs_advance_write+0x117/0x140
netfs_write_folio.isra.0+0x5ca/0x6e0
netfs_writepages+0x230/0x2f0
afs_writepages+0x4d/0x70
do_writepages+0x1e8/0x3e0
filemap_fdatawrite_wbc+0x84/0xa0
__filemap_fdatawrite_range+0xa8/0xf0
file_write_and_wait_range+0x59/0x90
afs_release+0x10f/0x270
__fput+0x25f/0x3d0
__do_sys_close+0x43/0x70
do_syscall_64+0x9f/0x100
entry_SYSCALL_64_after_hwframe+0x76/0x7e
-> #1 (&vnode->validate_lock){++++}-{3:3}:
__lock_acquire+0xaf0/0xd80
lock_acquire.part.0+0x103/0x280
down_read+0x95/0x200
afs_writepages+0x37/0x70
do_writepages+0x1e8/0x3e0
filemap_fdatawrite_wbc+0x84/0xa0
filemap_invalidate_inode+0x167/0x1e0
netfs_unbuffered_write_iter+0x1bd/0x2d0
vfs_write+0x22e/0x320
ksys_write+0xbc/0x130
do_syscall_64+0x9f/0x100
entry_SYSCALL_64_after_hwframe+0x76/0x7e
-> #0 (mapping.invalidate_lock#3){++++}-{3:3}:
check_noncircular+0x119/0x160
check_prev_add+0x195/0x430
__lock_acquire+0xaf0/0xd80
lock_acquire.part.0+0x103/0x280
down_read+0x95/0x200
filemap_fault+0x26e/0x8b0
__do_fault+0x57/0xd0
do_pte_missing+0x23b/0x320
__handle_mm_fault+0x2d4/0x320
handle_mm_fault+0x14f/0x260
do_user_addr_fault+0x2a2/0x500
exc_page_fault+0x71/0x90
asm_exc_page_fault+0x22/0x30
other info that might help us debug this:
Chain exists of:
mapping.invalidate_lock#3 --> &mm->mmap_lock --> &vma->vm_lock->lock
Possible unsafe locking scenario:
CPU0 CPU1
---- ----
rlock(&vma->vm_lock->lock);
lock(&mm->mmap_lock);
lock(&vma->vm_lock->lock);
rlock(mapping.invalidate_lock#3);
*** DEADLOCK ***
1 lock held by fsstress/6050:
#0: ffff888113f26d18 (&vma->vm_lock->lock){++++}-{3:3}, at: lock_vma_under_rcu+0x165/0x250
stack backtrace:
CPU: 0 PID: 6050 Comm: fsstress Not tainted 6.10.0-build2+ #956
Hardware name: ASUS All Series/H97-PLUS, BIOS 2306 10/09/2014
Call Trace:
<TASK>
dump_stack_lvl+0x57/0x80
check_noncircular+0x119/0x160
? queued_spin_lock_slowpath+0x4be/0x510
? __pfx_check_noncircular+0x10/0x10
? __pfx_queued_spin_lock_slowpath+0x10/0x10
? mark_lock+0x47/0x160
? init_chain_block+0x9c/0xc0
? add_chain_block+0x84/0xf0
check_prev_add+0x195/0x430
__lock_acquire+0xaf0/0xd80
? __pfx___lock_acquire+0x10/0x10
? __lock_release.isra.0+0x13b/0x230
lock_acquire.part.0+0x103/0x280
? filemap_fault+0x26e/0x8b0
? __pfx_lock_acquire.part.0+0x10/0x10
? rcu_is_watching+0x34/0x60
? lock_acquire+0xd7/0x120
down_read+0x95/0x200
? filemap_fault+0x26e/0x8b0
? __pfx_down_read+0x10/0x10
? __filemap_get_folio+0x25/0x1a0
filemap_fault+0x26e/0x8b0
? __pfx_filemap_fault+0x10/0x10
? find_held_lock+0x7c/0x90
? __pfx___lock_release.isra.0+0x10/0x10
? __pte_offset_map+0x99/0x110
__do_fault+0x57/0xd0
do_pte_missing+0x23b/0x320
__handle_mm_fault+0x2d4/0x320
? __pfx___handle_mm_fault+0x10/0x10
handle_mm_fault+0x14f/0x260
do_user_addr_fault+0x2a2/0x500
exc_page_fault+0x71/0x90
asm_exc_page_fault+0x22/0x30
Signed-off-by: David Howells <dhowells@redhat.com>
Link: https://lore.kernel.org/r/2136178.1721725194@warthog.procyon.org.uk
cc: Alexander Viro <viro@zeniv.linux.org.uk>
cc: Christian Brauner <brauner@kernel.org>
cc: Jan Kara <jack@suse.cz>
cc: Jeff Layton <jlayton@kernel.org>
cc: Gao Xiang <xiang@kernel.org>
cc: Matthew Wilcox <willy@infradead.org>
cc: netfs@lists.linux.dev
cc: linux-erofs@lists.ozlabs.org
cc: linux-fsdevel@vger.kernel.org
[brauner: fix minor issues]
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 51d37982bb ]
Set the maximum size of a subrequest that writes to cachefiles to be
MAX_RW_COUNT so that we don't overrun the maximum write we can make to the
backing filesystem.
Signed-off-by: David Howells <dhowells@redhat.com>
Link: https://lore.kernel.org/r/1599005.1721398742@warthog.procyon.org.uk
cc: Jeff Layton <jlayton@kernel.org>
cc: netfs@lists.linux.dev
cc: linux-fsdevel@vger.kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b798b685b4 ]
When allocating a random memory range for .amode31 sections
the minimal randomization address is 0. That does not lead
to a possible overlap with the decompressor image (which also
starts from 0) since by that time the image range is already
reserved.
Do not assume the decompressor range is reserved and always
provide the minimal randomization address for .amode31
sections beyond the decompressor. That is a prerequisite
for moving the lowcore memory address from NULL elsewhere.
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 542440fd7b ]
With gcc-14.1, there is a false-postive -Wuninitialized warning in
regcache_maple_drop:
drivers/base/regmap/regcache-maple.c: In function 'regcache_maple_drop':
drivers/base/regmap/regcache-maple.c:113:23: error: 'lower_index' is used uninitialized [-Werror=uninitialized]
113 | unsigned long lower_index, lower_last;
| ^~~~~~~~~~~
drivers/base/regmap/regcache-maple.c:113:36: error: 'lower_last' is used uninitialized [-Werror=uninitialized]
113 | unsigned long lower_index, lower_last;
| ^~~~~~~~~~
I've created a reduced test case to see if this needs to be reported
as a gcc, but it appears that the gcc-14.x branch already has a change
that turns this into a more sensible -Wmaybe-uninitialized warning, so
I ended up not reporting it so far.
The reduced test case also produces a warning for gcc-13 and gcc-12
but I don't see that with the version in the kernel.
Link: https://godbolt.org/z/oKbohKqd3
Link: https://lore.kernel.org/all/CAMuHMdWj=FLmkazPbYKPevDrcym2_HDb_U7Mb9YE9ovrP0jJfA@mail.gmail.com/
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://patch.msgid.link/20240719104030.1382465-1-arnd@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0124fbb4c6 ]
fw_arg1 is in memory space rather than I/O space, so we should use
early_memremap_ro() instead of early_ioremap() to map the cmdline.
Moreover, we should unmap it after using.
Suggested-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 555a05d84c ]
The dpaa-eth driver is written for PowerPC and Arm SoCs which have 1-24
CPUs. It depends on CONFIG_NR_CPUS having a reasonably small value in
Kconfig. Otherwise, there are 2 functions which allocate on-stack arrays
of NR_CPUS elements, and these can quickly explode in size, leading to
warnings such as:
drivers/net/ethernet/freescale/dpaa/dpaa_eth.c:3280:12: warning:
stack frame size (16664) exceeds limit (2048) in 'dpaa_eth_probe' [-Wframe-larger-than]
The problem is twofold:
- Reducing the array size to the boot-time num_possible_cpus() (rather
than the compile-time NR_CPUS) creates a variable-length array,
which should be avoided in the Linux kernel.
- Using NR_CPUS as an array size makes the driver blow up in stack
consumption with generic, as opposed to hand-crafted, .config files.
A simple solution is to use dynamic allocation for num_possible_cpus()
elements (aka a small number determined at runtime).
Link: https://lore.kernel.org/all/202406261920.l5pzM1rj-lkp@intel.com/
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Breno Leitao <leitao@debian.org>
Acked-by: Madalin Bucur <madalin.bucur@oss.nxp.com>
Link: https://patch.msgid.link/20240713225336.1746343-2-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 23e89e8ee7 ]
RFC 9293 states that in the case of simultaneous connect(), the connection
gets established when SYN+ACK is received. [0]
TCP Peer A TCP Peer B
1. CLOSED CLOSED
2. SYN-SENT --> <SEQ=100><CTL=SYN> ...
3. SYN-RECEIVED <-- <SEQ=300><CTL=SYN> <-- SYN-SENT
4. ... <SEQ=100><CTL=SYN> --> SYN-RECEIVED
5. SYN-RECEIVED --> <SEQ=100><ACK=301><CTL=SYN,ACK> ...
6. ESTABLISHED <-- <SEQ=300><ACK=101><CTL=SYN,ACK> <-- SYN-RECEIVED
7. ... <SEQ=100><ACK=301><CTL=SYN,ACK> --> ESTABLISHED
However, since commit 0c24604b68 ("tcp: implement RFC 5961 4.2"), such a
SYN+ACK is dropped in tcp_validate_incoming() and responded with Challenge
ACK.
For example, the write() syscall in the following packetdrill script fails
with -EAGAIN, and wrong SNMP stats get incremented.
0 socket(..., SOCK_STREAM|SOCK_NONBLOCK, IPPROTO_TCP) = 3
+0 connect(3, ..., ...) = -1 EINPROGRESS (Operation now in progress)
+0 > S 0:0(0) <mss 1460,sackOK,TS val 1000 ecr 0,nop,wscale 8>
+0 < S 0:0(0) win 1000 <mss 1000>
+0 > S. 0:0(0) ack 1 <mss 1460,sackOK,TS val 3308134035 ecr 0,nop,wscale 8>
+0 < S. 0:0(0) ack 1 win 1000
+0 write(3, ..., 100) = 100
+0 > P. 1:101(100) ack 1
--
# packetdrill cross-synack.pkt
cross-synack.pkt:13: runtime error in write call: Expected result 100 but got -1 with errno 11 (Resource temporarily unavailable)
# nstat
...
TcpExtTCPChallengeACK 1 0.0
TcpExtTCPSYNChallenge 1 0.0
The problem is that bpf_skops_established() is triggered by the Challenge
ACK instead of SYN+ACK. This causes the bpf prog to miss the chance to
check if the peer supports a TCP option that is expected to be exchanged
in SYN and SYN+ACK.
Let's accept a bare SYN+ACK for active-open TCP_SYN_RECV sockets to avoid
such a situation.
Note that tcp_ack_snd_check() in tcp_rcv_state_process() is skipped not to
send an unnecessary ACK, but this could be a bit risky for net.git, so this
targets for net-next.
Link: https://www.rfc-editor.org/rfc/rfc9293.html#section-3.5-7 [0]
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20240710171246.87533-2-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a4e772898f ]
One of the true positives that the cfg_access_lock lockdep effort
identified is this sequence:
WARNING: CPU: 14 PID: 1 at drivers/pci/pci.c:4886 pci_bridge_secondary_bus_reset+0x5d/0x70
RIP: 0010:pci_bridge_secondary_bus_reset+0x5d/0x70
Call Trace:
<TASK>
? __warn+0x8c/0x190
? pci_bridge_secondary_bus_reset+0x5d/0x70
? report_bug+0x1f8/0x200
? handle_bug+0x3c/0x70
? exc_invalid_op+0x18/0x70
? asm_exc_invalid_op+0x1a/0x20
? pci_bridge_secondary_bus_reset+0x5d/0x70
pci_reset_bus+0x1d8/0x270
vmd_probe+0x778/0xa10
pci_device_probe+0x95/0x120
Where pci_reset_bus() users are triggering unlocked secondary bus resets.
Ironically pci_bus_reset(), several calls down from pci_reset_bus(), uses
pci_bus_lock() before issuing the reset which locks everything *but* the
bridge itself.
For the same motivation as adding:
bridge = pci_upstream_bridge(dev);
if (bridge)
pci_dev_lock(bridge);
to pci_reset_function() for the "bus" and "cxl_bus" reset cases, add
pci_dev_lock() for @bus->self to pci_bus_lock().
Link: https://lore.kernel.org/r/171711747501.1628941.15217746952476635316.stgit@dwillia2-xfh.jf.intel.com
Reported-by: Imre Deak <imre.deak@intel.com>
Closes: http://lore.kernel.org/r/6657833b3b5ae_14984b29437@dwillia2-xfh.jf.intel.com.notmuch
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
[bhelgaas: squash in recursive locking deadlock fix from Keith Busch:
https://lore.kernel.org/r/20240711193650.701834-1-kbusch@meta.com]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Hans de Goede <hdegoede@redhat.com>
Tested-by: Kalle Valo <kvalo@kernel.org>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6ad8735994 ]
The exception vector of the booting hart is not set before enabling
the mmu and then still points to the value of the previous firmware,
typically _start. That makes it hard to debug setup_vm() when bad
things happen. So fix that by setting the exception vector earlier.
Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Signed-off-by: yang.zhang <yang.zhang@hexintek.com>
Link: https://lore.kernel.org/r/20240508022445.6131-1-gaoshanliukou@163.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
