Most readers are probably going to figure out that the config is actually
all upper-case letters, as all Kconfig symbols are this way.
Properly capitalizing makes the script ./scripts/checkkconfigsymbols.py
happy, which otherwise would report this as a reference to a non-existing
Kconfig symbol.
So, use the right capitalization for the MAGIC_SYSRQ config in the kgdb
documentation.
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Link: https://lore.kernel.org/r/20211230172423.30430-1-lukas.bulwahn@gmail.com
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
We now have dedicated pages on running tests. Therefore refocus the
usage page on writing tests and add content from tips page and
information on other architectures.
Signed-off-by: Harinder Singh <sharinder@google.com>
Reviewed-by: Tim Bird <tim.bird@sony.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Link: https://lore.kernel.org/r/20211217044911.798817-6-sharinder@google.com
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Consolidate documentation running tests into two pages: "run tests with
kunit_tool" and "run tests without kunit_tool".
Signed-off-by: Harinder Singh <sharinder@google.com>
Reviewed-by: Tim Bird <tim.bird@sony.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Link: https://lore.kernel.org/r/20211217044911.798817-5-sharinder@google.com
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Describe the components of KUnit and how the kernel mode parts
interact with kunit_tool.
Signed-off-by: Harinder Singh <sharinder@google.com>
Co-developed-by: Marco Elver <elver@google.com>
Signed-off-by: Marco Elver <elver@google.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Link: https://lore.kernel.org/r/20211217044911.798817-4-sharinder@google.com
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Add a section on advantages of unit testing, how to write unit tests,
KUnit features and Prerequisites.
Signed-off-by: Harinder Singh <sharinder@google.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Link: https://lore.kernel.org/r/20211217044911.798817-2-sharinder@google.com
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Problem: currently, if you remove something from your kunitconfig,
kunit.py will not regenerate the .config file.
The same thing happens if you did --kunitconfig_add=CONFIG_KASAN=y [1]
and then ran again without it. Your new run will still have KASAN.
The reason is that kunit.py won't regenerate the .config file if it's a
superset of the kunitconfig. This speeds it up a bit for iterating.
This patch adds an additional check that forces kunit.py to regenerate
the .config file if the current kunitconfig doesn't match the previous
one.
What this means:
* deleting entries from .kunitconfig works as one would expect
* dropping a --kunitconfig_add also triggers a rebuild
* you can still edit .config directly to turn on new options
We implement this by creating a `last_used_kunitconfig` file in the
build directory (so .kunit, by default) after we generate the .config.
When comparing the kconfigs, we compare python sets, so duplicates and
permutations don't trip us up.
The majority of this patch is adding unit tests for the existing logic
and for the new case where `last_used_kunitconfig` differs.
[1] https://lore.kernel.org/linux-kselftest/20211106013058.2621799-2-dlatypov@google.com/
Signed-off-by: Daniel Latypov <dlatypov@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
KUnit does not have any first party support for "mocking".
The original RFC had some, but the code got dropped.
However, the documentation patches never got updated. This fixes that.
https://kunit.dev/mocking.html has a current writeup on the status quo
and will hopefully be eventually folded into the in-kernel
Documentation.
Signed-off-by: Daniel Latypov <dlatypov@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
It does not make any significant additions or changes other than those
already in use in the kernel: additional features can be added as they
become necessary and used.
[1]: https://testanything.org/tap-version-13-specification.html
Signed-off-by: Rae Moar <rmoar@google.com>
Co-developed-by: David Gow <davidgow@google.com>
Signed-off-by: David Gow <davidgow@google.com>
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20211207190251.18426-1-davidgow@google.com
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Document how KCSAN models a subset of weak memory and the subset of
missing memory barriers it can detect as a result.
Signed-off-by: Marco Elver <elver@google.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Merge more updates from Andrew Morton:
"87 patches.
Subsystems affected by this patch series: mm (pagecache and hugetlb),
procfs, misc, MAINTAINERS, lib, checkpatch, binfmt, kallsyms, ramfs,
init, codafs, nilfs2, hfs, crash_dump, signals, seq_file, fork,
sysvfs, kcov, gdb, resource, selftests, and ipc"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (87 commits)
ipc/ipc_sysctl.c: remove fallback for !CONFIG_PROC_SYSCTL
ipc: check checkpoint_restore_ns_capable() to modify C/R proc files
selftests/kselftest/runner/run_one(): allow running non-executable files
virtio-mem: disallow mapping virtio-mem memory via /dev/mem
kernel/resource: disallow access to exclusive system RAM regions
kernel/resource: clean up and optimize iomem_is_exclusive()
scripts/gdb: handle split debug for vmlinux
kcov: replace local_irq_save() with a local_lock_t
kcov: avoid enable+disable interrupts if !in_task()
kcov: allocate per-CPU memory on the relevant node
Documentation/kcov: define `ip' in the example
Documentation/kcov: include types.h in the example
sysv: use BUILD_BUG_ON instead of runtime check
kernel/fork.c: unshare(): use swap() to make code cleaner
seq_file: fix passing wrong private data
seq_file: move seq_escape() to a header
signal: remove duplicate include in signal.h
crash_dump: remove duplicate include in crash_dump.h
crash_dump: fix boolreturn.cocci warning
hfs/hfsplus: use WARN_ON for sanity check
...
The example code uses the variable `ip' but never declares it.
Declare `ip' as a 64bit variable which is the same type as the array
from which it loads its value.
Link: https://lkml.kernel.org/r/20210923164741.1859522-3-bigeasy@linutronix.de
Link: https://lore.kernel.org/r/20210830172627.267989-3-bigeasy@linutronix.de
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Acked-by: Dmitry Vyukov <dvyukov@google.com>
Acked-by: Marco Elver <elver@google.com>
Tested-by: Marco Elver <elver@google.com>
Reviewed-by: Andrey Konovalov <andreyknvl@gmail.com>
Cc: Clark Williams <williams@redhat.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Patch series "kcov: PREEMPT_RT fixup + misc", v2.
The last patch in series is follow-up to address the PREEMPT_RT issue
within in kcov reported by Clark [1]. Patches 1-3 are smaller things that
I noticed while staring at it. Patch 4 is small change which makes
replacement in #5 simpler / more obvious.
[1] https://lkml.kernel.org/r/20210809155909.333073de@theseus.lan
This patch (of 5):
The first example code has includes at the top, the following two
example share that part. The last example (remote coverage collection)
requires the linux/types.h header file due its __aligned_u64 usage.
Add the linux/types.h to the top most example and a comment that the
header files from above are required as it is done in the second
example.
Link: https://lkml.kernel.org/r/20210923164741.1859522-1-bigeasy@linutronix.de
Link: https://lore.kernel.org/r/20210830172627.267989-2-bigeasy@linutronix.de
Link: https://lkml.kernel.org/r/20210923164741.1859522-2-bigeasy@linutronix.de
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Acked-by: Dmitry Vyukov <dvyukov@google.com>
Acked-by: Marco Elver <elver@google.com>
Tested-by: Marco Elver <elver@google.com>
Reviewed-by: Andrey Konovalov <andreyknvl@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Clark Williams <williams@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Merge misc updates from Andrew Morton:
"257 patches.
Subsystems affected by this patch series: scripts, ocfs2, vfs, and
mm (slab-generic, slab, slub, kconfig, dax, kasan, debug, pagecache,
gup, swap, memcg, pagemap, mprotect, mremap, iomap, tracing, vmalloc,
pagealloc, memory-failure, hugetlb, userfaultfd, vmscan, tools,
memblock, oom-kill, hugetlbfs, migration, thp, readahead, nommu, ksm,
vmstat, madvise, memory-hotplug, rmap, zsmalloc, highmem, zram,
cleanups, kfence, and damon)"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (257 commits)
mm/damon: remove return value from before_terminate callback
mm/damon: fix a few spelling mistakes in comments and a pr_debug message
mm/damon: simplify stop mechanism
Docs/admin-guide/mm/pagemap: wordsmith page flags descriptions
Docs/admin-guide/mm/damon/start: simplify the content
Docs/admin-guide/mm/damon/start: fix a wrong link
Docs/admin-guide/mm/damon/start: fix wrong example commands
mm/damon/dbgfs: add adaptive_targets list check before enable monitor_on
mm/damon: remove unnecessary variable initialization
Documentation/admin-guide/mm/damon: add a document for DAMON_RECLAIM
mm/damon: introduce DAMON-based Reclamation (DAMON_RECLAIM)
selftests/damon: support watermarks
mm/damon/dbgfs: support watermarks
mm/damon/schemes: activate schemes based on a watermarks mechanism
tools/selftests/damon: update for regions prioritization of schemes
mm/damon/dbgfs: support prioritization weights
mm/damon/vaddr,paddr: support pageout prioritization
mm/damon/schemes: prioritize regions within the quotas
mm/damon/selftests: support schemes quotas
mm/damon/dbgfs: support quotas of schemes
...
We have observed that on very large machines with newer CPUs, the static
key/branch switching delay is on the order of milliseconds. This is due
to the required broadcast IPIs, which simply does not scale well to
hundreds of CPUs (cores). If done too frequently, this can adversely
affect tail latencies of various workloads.
One workaround is to increase the sample interval to several seconds,
while decreasing sampled allocation coverage, but the problem still
exists and could still increase tail latencies.
As already noted in the Kconfig help text, there are trade-offs: at
lower sample intervals the dynamic branch results in better performance;
however, at very large sample intervals, the static keys mode can result
in better performance -- careful benchmarking is recommended.
Our initial benchmarking showed that with large enough sample intervals
and workloads stressing the allocator, the static keys mode was slightly
better. Evaluating and observing the possible system-wide side-effects
of the static-key-switching induced broadcast IPIs, however, was a blind
spot (in particular on large machines with 100s of cores).
Therefore, a major downside of the static keys mode is, unfortunately,
that it is hard to predict performance on new system architectures and
topologies, but also making conclusions about performance of new
workloads based on a limited set of benchmarks.
Most distributions will simply select the defaults, while targeting a
large variety of different workloads and system architectures. As such,
the better default is CONFIG_KFENCE_STATIC_KEYS=n, and re-enabling it is
only recommended after careful evaluation.
For reference, on x86-64 the condition in kfence_alloc() generates
exactly
2 instructions in the kmem_cache_alloc() fast-path:
| ...
| cmpl $0x0,0x1a8021c(%rip) # ffffffff82d560d0 <kfence_allocation_gate>
| je ffffffff812d6003 <kmem_cache_alloc+0x243>
| ...
which, given kfence_allocation_gate is infrequently modified, should be
well predicted by most CPUs.
Link: https://lkml.kernel.org/r/20211019102524.2807208-2-elver@google.com
Signed-off-by: Marco Elver <elver@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Jann Horn <jannh@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Add a note briefly mentioning the new policy about "skipping currently
covered allocations if pool close to full." Since this has a notable
impact on KFENCE's bug-detection ability on systems with large uptimes,
it is worth pointing out the feature.
Link: https://lkml.kernel.org/r/20210923104803.2620285-5-elver@google.com
Signed-off-by: Marco Elver <elver@google.com>
Reviewed-by: Dmitry Vyukov <dvyukov@google.com>
Acked-by: Alexander Potapenko <glider@google.com>
Cc: Aleksandr Nogikh <nogikh@google.com>
Cc: Jann Horn <jannh@google.com>
Cc: Taras Madan <tarasmadan@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
- Some small scripts/kerneldoc fixes
- More Chinese translation work, but at a much reduced rate.
- The tip-tree maintainer's handbook
...plus the usual array of build fixes, typo fixes, etc.
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEIw+MvkEiF49krdp9F0NaE2wMflgFAmGBqbYPHGNvcmJldEBs
d24ubmV0AAoJEBdDWhNsDH5YzMoH+wQwUbILvf4FB9h6l0qhbPnvcLMJtDiuIGSu
Ivfc1t+Vh7/waehaYfn9erCNps6oE13Arsy0DDFZcr6vbjXFO5clFoh5jvSJsk+G
zTXzZNB99SoJcZw9r8F7aJDbQNJfSXoyTTOg1mSeXNo+nkBFTSWO7QwCx5M2obaT
76+r8HQpnEYmrGePsOXriV4aOP+yJxuGgkPb+VPlPtQhA7v6dzo5hmoh5tPIzCLd
Fz8ek4aAm9sPEtu1UUoA+7MALZHTFwPv6aSAuyVeNfF/UBL6M4iAwusQyLdPFfoj
JPO7f+1h6a8jKTfTWGjPI3o33DtU/8nc6DgnuBaXBTKW8Dl5Exk=
=q37Q
-----END PGP SIGNATURE-----
Merge tag 'docs-5.16' of git://git.lwn.net/linux
Pull documentation updates from Jonathan Corbet:
"This is a relatively unexciting cycle for documentation.
- Some small scripts/kerneldoc fixes
- More Chinese translation work, but at a much reduced rate.
- The tip-tree maintainer's handbook
...plus the usual array of build fixes, typo fixes, etc"
* tag 'docs-5.16' of git://git.lwn.net/linux: (53 commits)
kernel-doc: support DECLARE_PHY_INTERFACE_MASK()
docs/zh_CN: add core-api xarray translation
docs/zh_CN: add core-api assoc_array translation
speakup: Fix typo in documentation "boo" -> "boot"
docs: submitting-patches: make section about the Link: tag more explicit
docs: deprecated.rst: Clarify open-coded arithmetic with literals
scripts: documentation-file-ref-check: fix bpf selftests path
scripts: documentation-file-ref-check: ignore hidden files
coding-style.rst: trivial: fix location of driver model macros
docs: f2fs: fix text alignment
docs/zh_CN add PCI pci.rst translation
docs/zh_CN add PCI index.rst translation
docs: translations: zh_CN: memory-hotplug.rst: fix a typo
docs: translations: zn_CN: irq-affinity.rst: add a missing extension
block: add documentation for inflight
scripts: kernel-doc: Ignore __alloc_size() attribute
docs: pdfdocs: Adjust \headheight for fancyhdr
docs: UML: user_mode_linux_howto_v2 edits
docs: use the lore redirector everywhere
docs: proc.rst: mountinfo: align columns
...
This KUnit update for Linux 5.16-rc1 consist of several enhancements
and fixes:
- ability to run each test suite and test separately
- support for timing test run
- several fixes and improvements
-----BEGIN PGP SIGNATURE-----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=UpDf
-----END PGP SIGNATURE-----
Merge tag 'linux-kselftest-kunit-5.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull KUnit updates from Shuah Khan:
"Several enhancements and fixes:
- ability to run each test suite and test separately
- support for timing test run
- several fixes and improvements"
* tag 'linux-kselftest-kunit-5.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
kunit: tool: fix typecheck errors about loading qemu configs
kunit: tool: continue past invalid utf-8 output
kunit: Reset suite count after running tests
kunit: tool: improve compatibility of kunit_parser with KTAP specification
kunit: tool: yield output from run_kernel in real time
kunit: tool: support running each suite/test separately
kunit: tool: actually track how long it took to run tests
kunit: tool: factor exec + parse steps into a function
kunit: add 'kunit.action' param to allow listing out tests
kunit: tool: show list of valid --arch options when invalid
kunit: tool: misc fixes (unused vars, imports, leaked files)
kunit: fix too small allocation when using suite-only kunit.filter_glob
kunit: tool: allow filtering test cases via glob
kunit: drop assumption in kunit-log-test about current suite
Commit 1d71307a6f ("kunit: add unit test for filtering suites by
names") introduced the ability to filter which suites we run via glob.
This change extends it so we can also filter individual test cases
inside of suites as well.
This is quite useful when, e.g.
* trying to run just the tests cases you've just added or are working on
* trying to debug issues with test hermeticity
Examples:
$ ./tools/testing/kunit/kunit.py run --kunitconfig=lib/kunit '*exec*.parse*'
...
============================================================
======== [PASSED] kunit_executor_test ========
[PASSED] parse_filter_test
============================================================
Testing complete. 1 tests run. 0 failed. 0 crashed.
$ ./tools/testing/kunit/kunit.py run --kunitconfig=lib/kunit '*.no_matching_tests'
...
[ERROR] no tests run!
Signed-off-by: Daniel Latypov <dlatypov@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Architectures supported by KASAN_HW_TAGS can provide an asymmetric mode
of execution. On an MTE enabled arm64 hw for example this can be
identified with the asymmetric tagging mode of execution. In particular,
when such a mode is present, the CPU triggers a fault on a tag mismatch
during a load operation and asynchronously updates a register when a tag
mismatch is detected during a store operation.
Extend the KASAN HW execution mode kernel command line parameter to
support asymmetric mode.
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Konovalov <andreyknvl@gmail.com>
Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Andrey Konovalov <andreyknvl@gmail.com>
Link: https://lore.kernel.org/r/20211006154751.4463-6-vincenzo.frascino@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
Add a new message type SYMBOLIC_PERMS under the 'Permissions'
subsection. Octal permission bits are easier to read and understand
instead of their symbolic macro names.
Suggested-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Signed-off-by: Utkarsh Verma <utkarshverma294@gmail.com>
Reviewed-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Acked-by: Dwaipayan Ray <dwaipayanray1@gmail.com>
Link: https://lore.kernel.org/r/20210904082330.14864-1-utkarshverma294@gmail.com
[jc: Tweaked wording as suggested by Dwaipayan Ray]
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Add a new message type TRAILING_SEMICOLON for the macro definitions
that conclude with a semicolon.
Suggested-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Signed-off-by: Utkarsh Verma <utkarshverma294@gmail.com>
Link: https://lore.kernel.org/r/20210904074201.13532-1-utkarshverma294@gmail.com
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Add a new message type SPLIT_STRING under the 'Indentation and Line
Breaks' subsection. Checkpatch documentation for the splitting of
quoted strings that appear in userspace, across multiple lines.
Suggested-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Signed-off-by: Utkarsh Verma <utkarshverma294@gmail.com>
Link: https://lore.kernel.org/r/20210904073621.12987-1-utkarshverma294@gmail.com
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Merge more updates from Andrew Morton:
"147 patches, based on 7d2a07b769.
Subsystems affected by this patch series: mm (memory-hotplug, rmap,
ioremap, highmem, cleanups, secretmem, kfence, damon, and vmscan),
alpha, percpu, procfs, misc, core-kernel, MAINTAINERS, lib,
checkpatch, epoll, init, nilfs2, coredump, fork, pids, criu, kconfig,
selftests, ipc, and scripts"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (94 commits)
scripts: check_extable: fix typo in user error message
mm/workingset: correct kernel-doc notations
ipc: replace costly bailout check in sysvipc_find_ipc()
selftests/memfd: remove unused variable
Kconfig.debug: drop selecting non-existing HARDLOCKUP_DETECTOR_ARCH
configs: remove the obsolete CONFIG_INPUT_POLLDEV
prctl: allow to setup brk for et_dyn executables
pid: cleanup the stale comment mentioning pidmap_init().
kernel/fork.c: unexport get_{mm,task}_exe_file
coredump: fix memleak in dump_vma_snapshot()
fs/coredump.c: log if a core dump is aborted due to changed file permissions
nilfs2: use refcount_dec_and_lock() to fix potential UAF
nilfs2: fix memory leak in nilfs_sysfs_delete_snapshot_group
nilfs2: fix memory leak in nilfs_sysfs_create_snapshot_group
nilfs2: fix memory leak in nilfs_sysfs_delete_##name##_group
nilfs2: fix memory leak in nilfs_sysfs_create_##name##_group
nilfs2: fix NULL pointer in nilfs_##name##_attr_release
nilfs2: fix memory leak in nilfs_sysfs_create_device_group
trap: cleanup trap_init()
init: move usermodehelper_enable() to populate_rootfs()
...
Record cpu and timestamp on allocations and frees, and show them in
reports. Upon an error, this can help correlate earlier messages in the
kernel log via allocation and free timestamps.
Link: https://lkml.kernel.org/r/20210714175312.2947941-1-elver@google.com
Suggested-by: Joern Engel <joern@purestorage.com>
Signed-off-by: Marco Elver <elver@google.com>
Acked-by: Alexander Potapenko <glider@google.com>
Acked-by: Joern Engel <joern@purestorage.com>
Cc: Yuanyuan Zhong <yzhong@purestorage.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Merge misc updates from Andrew Morton:
"173 patches.
Subsystems affected by this series: ia64, ocfs2, block, and mm (debug,
pagecache, gup, swap, shmem, memcg, selftests, pagemap, mremap,
bootmem, sparsemem, vmalloc, kasan, pagealloc, memory-failure,
hugetlb, userfaultfd, vmscan, compaction, mempolicy, memblock,
oom-kill, migration, ksm, percpu, vmstat, and madvise)"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (173 commits)
mm/madvise: add MADV_WILLNEED to process_madvise()
mm/vmstat: remove unneeded return value
mm/vmstat: simplify the array size calculation
mm/vmstat: correct some wrong comments
mm/percpu,c: remove obsolete comments of pcpu_chunk_populated()
selftests: vm: add COW time test for KSM pages
selftests: vm: add KSM merging time test
mm: KSM: fix data type
selftests: vm: add KSM merging across nodes test
selftests: vm: add KSM zero page merging test
selftests: vm: add KSM unmerge test
selftests: vm: add KSM merge test
mm/migrate: correct kernel-doc notation
mm: wire up syscall process_mrelease
mm: introduce process_mrelease system call
memblock: make memblock_find_in_range method private
mm/mempolicy.c: use in_task() in mempolicy_slab_node()
mm/mempolicy: unify the create() func for bind/interleave/prefer-many policies
mm/mempolicy: advertise new MPOL_PREFERRED_MANY
mm/hugetlb: add support for mempolicy MPOL_PREFERRED_MANY
...
Move the boot parameter 'kasan.fault' from hw_tags.c to report.c, so it
can support all KASAN modes - generic, and both tag-based.
Link: https://lkml.kernel.org/r/20210713010536.3161822-1-woodylin@google.com
Signed-off-by: Woody Lin <woodylin@google.com>
Reviewed-by: Marco Elver <elver@google.com>
Reviewed-by: Andrey Konovalov <andreyknvl@gmail.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
- Update documentation and code example
KCSAN updates:
- Introduce CONFIG_KCSAN_STRICT (which RCU uses)
- Optimize use of get_ctx() by kcsan_found_watchpoint()
- Rework atomic.h into permissive.h
- Add the ability to ignore writes that change only one bit of a given data-racy variable.
- Improve comments
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=99fO
-----END PGP SIGNATURE-----
Merge tag 'locking-debug-2021-09-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull memory model updates from Ingo Molnar:
"LKMM updates:
- Update documentation and code example
KCSAN updates:
- Introduce CONFIG_KCSAN_STRICT (which RCU uses)
- Optimize use of get_ctx() by kcsan_found_watchpoint()
- Rework atomic.h into permissive.h
- Add the ability to ignore writes that change only one bit of a
given data-racy variable.
- Improve comments"
* tag 'locking-debug-2021-09-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
tools/memory-model: Document data_race(READ_ONCE())
tools/memory-model: Heuristics using data_race() must handle all values
tools/memory-model: Add example for heuristic lockless reads
tools/memory-model: Make read_foo_diagnostic() more clearly diagnostic
kcsan: Make strict mode imply interruptible watchers
kcsan: permissive: Ignore data-racy 1-bit value changes
kcsan: Print if strict or non-strict during init
kcsan: Rework atomic.h into permissive.h
kcsan: Reduce get_ctx() uses in kcsan_found_watchpoint()
kcsan: Introduce CONFIG_KCSAN_STRICT
kcsan: Remove CONFIG_KCSAN_DEBUG
kcsan: Improve some Kconfig comments
--raw_output is nice, but it would be nicer if could show only output
after KUnit tests have started.
So change the flag to allow specifying a string ('kunit').
Make it so `--raw_output` alone will default to `--raw_output=all` and
have the same original behavior.
Drop the small kunit_parser.raw_output() function since it feels wrong
to put it in "kunit_parser.py" when the point of it is to not parse
anything.
E.g.
$ ./tools/testing/kunit/kunit.py run --raw_output=kunit
...
[15:24:07] Starting KUnit Kernel ...
TAP version 14
1..1
# Subtest: example
1..3
# example_simple_test: initializing
ok 1 - example_simple_test
# example_skip_test: initializing
# example_skip_test: You should not see a line below.
ok 2 - example_skip_test # SKIP this test should be skipped
# example_mark_skipped_test: initializing
# example_mark_skipped_test: You should see a line below.
# example_mark_skipped_test: You should see this line.
ok 3 - example_mark_skipped_test # SKIP this test should be skipped
ok 1 - example
[15:24:10] Elapsed time: 6.487s total, 0.001s configuring, 3.510s building, 0.000s running
Signed-off-by: Daniel Latypov <dlatypov@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
kunit.py currently does not make it possible for users to specify module
parameters (/kernel arguments more generally) unless one directly tweaks
the kunit.py code itself.
This hasn't mattered much so far, but this would make it easier to port
existing tests that expose module parameters over to KUnit and/or let
current KUnit tests take advantage of them.
Tested using an kunit internal parameter:
$ ./tools/testing/kunit/kunit.py run --kunitconfig=lib/kunit \
--kernel_args=kunit.filter_glob=kunit_status
...
Testing complete. 2 tests run. 0 failed. 0 crashed. 0 skipped.
Signed-off-by: Daniel Latypov <dlatypov@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Rework atomic.h into permissive.h to better reflect its purpose, and
introduce kcsan_ignore_address() and kcsan_ignore_data_race().
Introduce CONFIG_KCSAN_PERMISSIVE and update the stub functions in
preparation for subsequent changes.
As before, developers who choose to use KCSAN in "strict" mode will see
all data races and are not affected. Furthermore, by relying on the
value-change filter logic for kcsan_ignore_data_race(), even if the
permissive rules are enabled, the opt-outs in report.c:skip_report()
override them (such as for RCU-related functions by default).
The option CONFIG_KCSAN_PERMISSIVE is disabled by default, so that the
documented default behaviour of KCSAN does not change. Instead, like
CONFIG_KCSAN_IGNORE_ATOMICS, the option needs to be explicitly opted in.
Signed-off-by: Marco Elver <elver@google.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Add a simpler Kconfig variable to configure KCSAN's "strict" mode. This
makes it simpler in documentation or messages to suggest just a single
configuration option to select the strictest checking mode (vs.
currently having to list several options).
Signed-off-by: Marco Elver <elver@google.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Commit b6d5799b0b ("kunit: Add 'kunit_shutdown' option") changes KUnit
to call kernel_halt() by default when done testing.
This fixes the issue with not having .gcda files due to not calling
atexit() handlers, and therefore we can stop recommending people
manually tweak UML code.
The need to use older versions of GCC (<=6) remains however, due to
linktime issues, same as before. Note: There also might still be issues
with .gcda files as well in newer versions.
Signed-off-by: Daniel Latypov <dlatypov@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
This KUnit update for Linux 5.14-rc1 consists of fixes and features:
-- add support for skipped tests
-- introduce kunit_kmalloc_array/kunit_kcalloc() helpers
-- add gnu_printf specifiers
-- add kunit_shutdown
-- add unit test for filtering suites by names
-- convert lib/test_list_sort.c to use KUnit
-- code organization moving default config to tools/testing/kunit
-- refactor of internal parser input handling
-- cleanups and updates to documentation
-- code cleanup related to casts
-----BEGIN PGP SIGNATURE-----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=5QAv
-----END PGP SIGNATURE-----
Merge tag 'linux-kselftest-kunit-fixes-5.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull KUnit update from Shuah Khan:
"Fixes and features:
- add support for skipped tests
- introduce kunit_kmalloc_array/kunit_kcalloc() helpers
- add gnu_printf specifiers
- add kunit_shutdown
- add unit test for filtering suites by names
- convert lib/test_list_sort.c to use KUnit
- code organization moving default config to tools/testing/kunit
- refactor of internal parser input handling
- cleanups and updates to documentation
- code cleanup related to casts"
* tag 'linux-kselftest-kunit-fixes-5.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: (29 commits)
kunit: add unit test for filtering suites by names
kasan: test: make use of kunit_skip()
kunit: test: Add example tests which are always skipped
kunit: tool: Support skipped tests in kunit_tool
kunit: Support skipped tests
thunderbolt: test: Reinstate a few casts of bitfields
kunit: tool: internal refactor of parser input handling
lib/test: convert lib/test_list_sort.c to use KUnit
kunit: introduce kunit_kmalloc_array/kunit_kcalloc() helpers
kunit: Remove the unused all_tests.config
kunit: Move default config from arch/um -> tools/testing/kunit
kunit: arch/um/configs: Enable KUNIT_ALL_TESTS by default
kunit: Add gnu_printf specifiers
lib/cmdline_kunit: Remove a cast which are no-longer required
kernel/sysctl-test: Remove some casts which are no-longer required
thunderbolt: test: Remove some casts which are no longer required
mmc: sdhci-of-aspeed: Remove some unnecessary casts from KUnit tests
iio: Remove a cast in iio-test-format which is no longer required
device property: Remove some casts in property-entry-test
Documentation: kunit: Clean up some string casts in examples
...
Merge misc updates from Andrew Morton:
"191 patches.
Subsystems affected by this patch series: kthread, ia64, scripts,
ntfs, squashfs, ocfs2, kernel/watchdog, and mm (gup, pagealloc, slab,
slub, kmemleak, dax, debug, pagecache, gup, swap, memcg, pagemap,
mprotect, bootmem, dma, tracing, vmalloc, kasan, initialization,
pagealloc, and memory-failure)"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (191 commits)
mm,hwpoison: make get_hwpoison_page() call get_any_page()
mm,hwpoison: send SIGBUS with error virutal address
mm/page_alloc: split pcp->high across all online CPUs for cpuless nodes
mm/page_alloc: allow high-order pages to be stored on the per-cpu lists
mm: replace CONFIG_FLAT_NODE_MEM_MAP with CONFIG_FLATMEM
mm: replace CONFIG_NEED_MULTIPLE_NODES with CONFIG_NUMA
docs: remove description of DISCONTIGMEM
arch, mm: remove stale mentions of DISCONIGMEM
mm: remove CONFIG_DISCONTIGMEM
m68k: remove support for DISCONTIGMEM
arc: remove support for DISCONTIGMEM
arc: update comment about HIGHMEM implementation
alpha: remove DISCONTIGMEM and NUMA
mm/page_alloc: move free_the_page
mm/page_alloc: fix counting of managed_pages
mm/page_alloc: improve memmap_pages dbg msg
mm: drop SECTION_SHIFT in code comments
mm/page_alloc: introduce vm.percpu_pagelist_high_fraction
mm/page_alloc: limit the number of pages on PCP lists when reclaim is active
mm/page_alloc: scale the number of pages that are batch freed
...
The KUNIT_EXPECT_KASAN_FAIL() macro currently uses KUNIT_EXPECT_EQ() to
compare fail_data.report_expected and fail_data.report_found. This always
gave a somewhat useless error message on failure, but the addition of
extra compile-time checking with READ_ONCE() has caused it to get much
longer, and be truncated before anything useful is displayed.
Instead, just check fail_data.report_found by hand (we've just set
report_expected to 'true'), and print a better failure message with
KUNIT_FAIL(). Because of this, report_expected is no longer used
anywhere, and can be removed.
Beforehand, a failure in:
KUNIT_EXPECT_KASAN_FAIL(test, ((volatile char *)area)[3100]);
would have looked like:
[22:00:34] [FAILED] vmalloc_oob
[22:00:34] # vmalloc_oob: EXPECTATION FAILED at lib/test_kasan.c:991
[22:00:34] Expected ({ do { extern void __compiletime_assert_705(void) __attribute__((__error__("Unsupported access size for {READ,WRITE}_ONCE()."))); if (!((sizeof(fail_data.report_expected) == sizeof(char) || sizeof(fail_data.repp
[22:00:34] not ok 45 - vmalloc_oob
With this change, it instead looks like:
[22:04:04] [FAILED] vmalloc_oob
[22:04:04] # vmalloc_oob: EXPECTATION FAILED at lib/test_kasan.c:993
[22:04:04] KASAN failure expected in "((volatile char *)area)[3100]", but none occurred
[22:04:04] not ok 45 - vmalloc_oob
Also update the example failure in the documentation to reflect this.
Link: https://lkml.kernel.org/r/20210606005531.165954-1-davidgow@google.com
Signed-off-by: David Gow <davidgow@google.com>
Reviewed-by: Andrey Konovalov <andreyknvl@gmail.com>
Reviewed-by: Marco Elver <elver@google.com>
Acked-by: Brendan Higgins <brendanhiggins@google.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Daniel Axtens <dja@axtens.net>
Cc: David Gow <davidgow@google.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The default .kunitconfig file is currently kept in
arch/um/configs/kunit_defconfig, but -- with the impending QEMU patch
-- will no-longer be exclusively used for UML-based kernels.
Move it alongside the other KUnit configs in
tools/testing/kunit/configs, and give it a name which matches the
existing all_tests.config and broken_on_uml.config files.
Also update the Getting Started documentation to point to the new file.
Signed-off-by: David Gow <davidgow@google.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
As the type checking is no longer excessively strict, get rid of the
unsightly (char*) casts -- and comment discussing them -- from the KUnit
usage page.
Signed-off-by: David Gow <davidgow@google.com>
Reviewed-by: Daniel Latypov <dlatypov@google.com>
Acked-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
We'll be replacing :doc:`foo` references to
Documentation/foo.rst. Yet, here it happens inside a table.
Doing a search-and-replace would break it.
Yet, as there's no good reason to use a table there,
let's just convert it into a list.
Reviewed-by: David Gow <davidgow@google.com>
Acked-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
The :doc:`foo` tag is auto-generated via automarkup.py.
So, use the filename at the sources, instead of :doc:`foo`.
Reviewed-by: David Gow <davidgow@google.com>
Acked-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Link: https://lore.kernel.org/r/6fde409079959a95b62b9b2692503608d7ff0dbd.1623824363.git.mchehab+huawei@kernel.org
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
We'll be replacing :doc:`foo` references to
Documentation/foo.rst. Yet, here it happens inside a table.
Doing a search-and-replace would break it.
Yet, as there's no good reason to use a table there,
let's just convert it into a list.
Reviewed-by: David Gow <davidgow@google.com>
Acked-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Link: https://lore.kernel.org/r/07d3a8ccafbb6345d6e78fb090290859e84361a1.1623824363.git.mchehab+huawei@kernel.org
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Add and document more checkpatch message types. About 50% of all
message types are documented now.
In addition to this:
- Create a new subsection 'Indentation and Line Breaks'.
- Rename subsection 'Comment style' to simply 'Comments'.
- Refactor some of the existing types to appropriate subsections.
Reviewed-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Tested-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Signed-off-by: Dwaipayan Ray <dwaipayanray1@gmail.com>
Link: https://lore.kernel.org/r/20210614141132.6881-1-dwaipayanray1@gmail.com
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Document QEMU support, what it does, and how to use it in kunit_tool.
Signed-off-by: Brendan Higgins <brendanhiggins@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
The kunit_tool documentation page was pretty minimal, and a bit
outdated. Update it and flesh it out a bit.
In particular,
- Mention that .kunitconfig is now in the build directory
- Describe the use of --kunitconfig to specify a different config
framgent
- Mention the split functionality (i.e., commands other than 'run')
- Describe --raw_output and kunit.py parse
- Mention the globbing support
- Provide a quick overview of other options, including --build_dir and
--alltests
Note that this does overlap a little with the new running_tips page. I
don't think it's a problem having both: this page is supposed to be a
bit more of a reference, rather than a list of useful tips, so the fact
that they both describe the same features isn't a problem.
Signed-off-by: David Gow <davidgow@google.com>
Reviewed-by: Daniel Latypov <dlatypov@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
This is long overdue.
There are several things that aren't nailed down (in-tree
.kunitconfig's), or partially broken (GCOV on UML), but having them
documented, warts and all, is better than having nothing.
This covers a bunch of the more recent features
* kunit_filter_glob
* kunit.py run --kunitconfig
* slightly more detail on building tests as modules
* CONFIG_KUNIT_DEBUGFS
By my count, the only headline features now not mentioned are the KASAN
integration and KernelCI json output support (kunit.py run --json).
And then it also discusses how to get code coverage reports under UML
and non-UML since this is a question people have repeatedly asked.
Non-UML coverage collection is no different from normal, but we should
probably explicitly call this out.
As for UML, I was able to get it working again with two small hacks.*
E.g. with CONFIG_KUNIT=y && CONFIG_KUNIT_ALL_TESTS=y
Overall coverage rate:
lines......: 15.1% (18294 of 120776 lines)
functions..: 16.8% (1860 of 11050 functions)
Note: this doesn't document --alltests since this is not stable yet.
Hopefully being run more frequently as part of KernelCI will help...
*Using gcc/gcov-6 and not using uml_abort() in os_dump_core().
I've documented these hacks in "Notes" but left TODOs for
brendanhiggins@google.com who tracked down the runtime issue in GCC.
To be clear: these are not issues specific to KUnit, but rather to UML.
Signed-off-by: Daniel Latypov <dlatypov@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
While include/linux/bitops.h brings in the BIT() macro, it was moved to
include/linux/bits.h in commit 8bd9cb51da ("locking/atomics, asm-generic:
Move some macros from <linux/bitops.h> to a new <linux/bits.h> file").
Since that commit BIT() has moved again into include/vdso/bits.h via
commit 3945ff37d2 ("linux/bits.h: Extract common header for vDSO").
I think the move to the vDSO header can be considered an implementation
detail, so for now update the checkpatch documentation to recommend use
of include/linux/bits.h.
Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
Acked-by: Jiri Slaby <jirislaby@kernel.org>
Acked-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Acked-by: Dwaipayan Ray <dwaipayanray1@gmail.com>
Cc: Jiri Slaby <jirislaby@kernel.org>
Link: https://lore.kernel.org/r/20210520093949.511471-1-andrew@aj.id.au
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
- Document a couple of more checkpatch message types.
- Add a blank line before all `See:` lines to improve the
rst output.
- Create a new subsection `Permissions` and move a few types
to it.
Signed-off-by: Dwaipayan Ray <dwaipayanray1@gmail.com>
Acked-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Link: https://lore.kernel.org/r/20210515132348.19082-1-dwaipayanray1@gmail.com
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
For consistency within kcsan.rst, use a URL link as the same as in
section "Data Races".
Acked-by: Marco Elver <elver@google.com>
Signed-off-by: Akira Yokosawa <akiyks@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Update the example reports based on the latest reports generated by
kcsan_test module, which now include the "value changed" line. Add a
brief description of the "value changed" line.
Signed-off-by: Marco Elver <elver@google.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
This commit references tools/memory-model/Documentation/access-marking.txt
in the bullet introducing data_race(). The access-marking.txt file
gives advice on when data_race() should and should not be used.
Suggested-by: Akira Yokosawa <akiyks@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
arm64 uses SP_EL0 to save the current task_struct address. While running
in EL0, SP_EL0 is clobbered by userspace. So if the upper bit is not 1
(not TTBR1), the current address is invalid. This patch checks the upper
bit of SP_EL0, if the upper bit is 1, lx_current() of arm64 will return
the derefrence of current task. Otherwise, lx_current() will tell users
they are running in userspace(EL0).
While arm64 is running in EL0, it is actually pointless to print current
task as the memory of kernel space is not accessible in EL0.
Link: https://lkml.kernel.org/r/20210314203444.15188-3-song.bao.hua@hisilicon.com
Signed-off-by: Barry Song <song.bao.hua@hisilicon.com>
Cc: Jan Kiszka <jan.kiszka@siemens.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Kieran Bingham <kbingham@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Patch series "scripts/gdb: clarify the platforms supporting lx_current and add arm64 support", v2.
lx_current depends on per_cpu current_task variable which exists on x86
only. so it actually works on x86 only. the 1st patch documents this
clearly; the 2nd patch adds support for arm64.
This patch (of 2):
x86 is the only architecture which has per_cpu current_task:
arch$ git grep current_task | grep -i per_cpu
x86/include/asm/current.h:DECLARE_PER_CPU(struct task_struct *, current_task);
x86/kernel/cpu/common.c:DEFINE_PER_CPU(struct task_struct *, current_task) ____cacheline_aligned =
x86/kernel/cpu/common.c:EXPORT_PER_CPU_SYMBOL(current_task);
x86/kernel/cpu/common.c:DEFINE_PER_CPU(struct task_struct *, current_task) = &init_task;
x86/kernel/cpu/common.c:EXPORT_PER_CPU_SYMBOL(current_task);
x86/kernel/smpboot.c: per_cpu(current_task, cpu) = idle;
On other architectures, lx_current() will lead to a python exception:
(gdb) p $lx_current().pid
Python Exception <class 'gdb.error'> No symbol "current_task" in current context.:
Error occurred in Python: No symbol "current_task" in current context.
To avoid more people struggling and wasting time in other architectures,
document it.
Link: https://lkml.kernel.org/r/20210314203444.15188-1-song.bao.hua@hisilicon.com
Link: https://lkml.kernel.org/r/20210314203444.15188-2-song.bao.hua@hisilicon.com
Signed-off-by: Barry Song <song.bao.hua@hisilicon.com>
Cc: Jan Kiszka <jan.kiszka@siemens.com>
Cc: Kieran Bingham <kbingham@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Update the "Tests" section in KASAN documentation:
- Add an introductory sentence.
- Add proper indentation for the list of ways to run KUnit tests.
- Punctuation, readability, and other minor clean-ups.
Link: https://lkml.kernel.org/r/fb08845e25c8847ffda271fa19cda2621c04a65b.1615559068.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Reviewed-by: Marco Elver <elver@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Update the "Shadow memory" section in KASAN documentation:
- Rearrange the introduction paragraph do it doesn't give a
"KASAN has an issue" impression.
- Update the list of architectures with vmalloc support.
- Punctuation, readability, and other minor clean-ups.
Link: https://lkml.kernel.org/r/00f8c38b0fd5290a3f4dced04eaba41383e67e14.1615559068.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Reviewed-by: Marco Elver <elver@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Update the "Implementation details" section for generic KASAN:
- Don't mention kmemcheck, it's not present in the kernel anymore.
- Don't mention GCC as the only supported compiler.
- Update kasan_mem_to_shadow() definition to match actual code.
- Punctuation, readability, and other minor clean-ups.
Link: https://lkml.kernel.org/r/f2f35fdab701f8c709f63d328f98aec2982c8acc.1615559068.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Reviewed-by: Marco Elver <elver@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Update the "Error reports" section in KASAN documentation:
- Mention that bug titles are best-effort.
- Move and reword the part about auxiliary stacks from "Implementation
details".
- Punctuation, readability, and other minor clean-ups.
Link: https://lkml.kernel.org/r/3531e8fe6972cf39d1954e3643237b19eb21227e.1615559068.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Reviewed-by: Marco Elver <elver@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Update the "Overview" section in KASAN documentation:
- Outline main use cases for each mode.
- Mention that HW_TAGS mode need compiler support too.
- Move the part about SLUB/SLAB support from "Usage" to "Overview".
- Punctuation, readability, and other minor clean-ups.
Link: https://lkml.kernel.org/r/1486fba8514de3d7db2f47df2192db59228b0a7b.1615559068.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Reviewed-by: Marco Elver <elver@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
- rtmutex cleanup & spring cleaning pass that removes ~400 lines of code
- Futex simplifications & cleanups
- Add debugging to the CSD code, to help track down a tenacious race (or hw problem)
- Add lockdep_assert_not_held(), to allow code to require a lock to not be held,
and propagate this into the ath10k driver
- Misc LKMM documentation updates
- Misc KCSAN updates: cleanups & documentation updates
- Misc fixes and cleanups
- Fix locktorture bugs with ww_mutexes
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=cOOk
-----END PGP SIGNATURE-----
Merge tag 'locking-core-2021-04-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull locking updates from Ingo Molnar:
- rtmutex cleanup & spring cleaning pass that removes ~400 lines of
code
- Futex simplifications & cleanups
- Add debugging to the CSD code, to help track down a tenacious race
(or hw problem)
- Add lockdep_assert_not_held(), to allow code to require a lock to not
be held, and propagate this into the ath10k driver
- Misc LKMM documentation updates
- Misc KCSAN updates: cleanups & documentation updates
- Misc fixes and cleanups
- Fix locktorture bugs with ww_mutexes
* tag 'locking-core-2021-04-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (44 commits)
kcsan: Fix printk format string
static_call: Relax static_call_update() function argument type
static_call: Fix unused variable warn w/o MODULE
locking/rtmutex: Clean up signal handling in __rt_mutex_slowlock()
locking/rtmutex: Restrict the trylock WARN_ON() to debug
locking/rtmutex: Fix misleading comment in rt_mutex_postunlock()
locking/rtmutex: Consolidate the fast/slowpath invocation
locking/rtmutex: Make text section and inlining consistent
locking/rtmutex: Move debug functions as inlines into common header
locking/rtmutex: Decrapify __rt_mutex_init()
locking/rtmutex: Remove pointless CONFIG_RT_MUTEXES=n stubs
locking/rtmutex: Inline chainwalk depth check
locking/rtmutex: Move rt_mutex_debug_task_free() to rtmutex.c
locking/rtmutex: Remove empty and unused debug stubs
locking/rtmutex: Consolidate rt_mutex_init()
locking/rtmutex: Remove output from deadlock detector
locking/rtmutex: Remove rtmutex deadlock tester leftovers
locking/rtmutex: Remove rt_mutex_timed_lock()
MAINTAINERS: Add myself as futex reviewer
locking/mutex: Remove repeated declaration
...
This KUnit update for Linux 5.13-rc1 consists of several fixes and
new feature to support failure from dynamic analysis tools such as
UBSAN and fake ops for testing.
- a fake ops struct for testing a "free" function to complain if it
was called with an invalid argument, or caught a double-free. Most
return void and have no normal means of signalling failure
(e.g. super_operations, iommu_ops, etc.).
-----BEGIN PGP SIGNATURE-----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=aP5e
-----END PGP SIGNATURE-----
Merge tag 'linux-kselftest-kunit-5.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull KUnit updates from Shuah Khan:
"Several fixes and a new feature to support failure from dynamic
analysis tools such as UBSAN and fake ops for testing.
- a fake ops struct for testing a "free" function to complain if it
was called with an invalid argument, or caught a double-free. Most
return void and have no normal means of signalling failure (e.g.
super_operations, iommu_ops, etc.)"
* tag 'linux-kselftest-kunit-5.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
Documentation: kunit: add tips for using current->kunit_test
kunit: fix -Wunused-function warning for __kunit_fail_current_test
kunit: support failure from dynamic analysis tools
kunit: tool: make --kunitconfig accept dirs, add lib/kunit fragment
kunit: make KUNIT_EXPECT_STREQ() quote values, don't print literals
kunit: Match parenthesis alignment to improve code readability
This Kselftest update for Linux 5.13-rc1 consists of:
- fixes and updates to resctrl test from Fenghua Yu and Reinette Chatre
- fixes to Kselftest documentation, framework
- minor spelling correction in timers test
-----BEGIN PGP SIGNATURE-----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=0VC+
-----END PGP SIGNATURE-----
Merge tag 'linux-kselftest-next-5.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull Kselftest updates from Shuah Khan:
- fixes and updates to resctrl test from Fenghua Yu and Reinette Chatre
- fixes to Kselftest documentation, framework
- minor spelling correction in timers test
* tag 'linux-kselftest-next-5.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: (25 commits)
selftests/resctrl: Change a few printed messages
Documentation: kselftest: fix path to test module files
selftests/resctrl: Create .gitignore to include resctrl_tests
selftests/resctrl: Fix checking for < 0 for unsigned values
selftests/resctrl: Fix incorrect parsing of iMC counters
selftests/resctrl: Fix unmount resctrl FS
selftests/resctrl: Skip the test if requested resctrl feature is not supported
selftests/resctrl: Modularize resctrl test suite main() function
selftests/resctrl: Don't hard code value of "no_of_bits" variable
selftests/resctrl: Fix MBA/MBM results reporting format
selftests/resctrl: Use resctrl/info for feature detection
selftests/resctrl: Check for resctrl mount point only if resctrl FS is supported
selftests/resctrl: Add config dependencies
selftests/resctrl: Fix a printed message
selftests/resctrl: Share show_cache_info() by CAT and CMT tests
selftests/resctrl: Call kselftest APIs to log test results
selftests/resctrl: Rename CQM test as CMT test
selftests/resctrl: Fix missing options "-n" and "-p"
selftests/resctrl: Ensure sibling CPU is not same as original CPU
selftests/resctrl: Clean up resctrl features check
...
well contained to Documentation/ itself. Highlights include:
- The Chinese translators have been busy and show no signs of stopping
anytime soon. Italian has also caught up.
- Aditya Srivastava has been working on improvements to the kernel-doc
script.
- Thorsten continues his work on reporting-issues.rst and related
documentation around regression reporting.
- Lots of documentation updates, typo fixes, etc. as usual
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEIw+MvkEiF49krdp9F0NaE2wMflgFAmCG5moPHGNvcmJldEBs
d24ubmV0AAoJEBdDWhNsDH5YCoUH/1q/O+IvS+JNkxneDxbB6OC799BQpabZHi7/
HbYfgfX0nKrV3NAwIhigsIj6WHRE+5p2rKiHOuQxL3daJyfZSqQl0/yI0Ag7Of4g
7y1FKBQrfqS6tJcyNckdtBfxYUQP9yCJY0xfIexkTNiujbmkMKDSJD7lKXd0AaTM
styCvTbgTPTzadL5bIHj/GxJ9s8DsxO3y9LGdRc+GrNzPFliMYWlJgbR28zjEKBm
UQzy7JGNBX3qTJwgjvv/myqRDy6MligvGrP+wG0KTnAHXKkvDFl3p46kPwzdk1JE
+F5sbboUWh20GLYy9t4MZOcq38FUcEPlRPXkxsGNyA8co5ij8+g=
=7db3
-----END PGP SIGNATURE-----
Merge tag 'docs-5.13' of git://git.lwn.net/linux
Pull documentation updates from Jonathan Corbet:
"It's been a relatively busy cycle in docsland, though more than
usually well contained to Documentation/ itself. Highlights include:
- The Chinese translators have been busy and show no signs of
stopping anytime soon. Italian has also caught up.
- Aditya Srivastava has been working on improvements to the
kernel-doc script.
- Thorsten continues his work on reporting-issues.rst and related
documentation around regression reporting.
- Lots of documentation updates, typo fixes, etc. as usual"
* tag 'docs-5.13' of git://git.lwn.net/linux: (139 commits)
docs/zh_CN: add openrisc translation to zh_CN index
docs/zh_CN: add openrisc index.rst translation
docs/zh_CN: add openrisc todo.rst translation
docs/zh_CN: add openrisc openrisc_port.rst translation
docs/zh_CN: add core api translation to zh_CN index
docs/zh_CN: add core-api index.rst translation
docs/zh_CN: add core-api irq index.rst translation
docs/zh_CN: add core-api irq irqflags-tracing.rst translation
docs/zh_CN: add core-api irq irq-domain.rst translation
docs/zh_CN: add core-api irq irq-affinity.rst translation
docs/zh_CN: add core-api irq concepts.rst translation
docs: sphinx-pre-install: don't barf on beta Sphinx releases
scripts: kernel-doc: improve parsing for kernel-doc comments syntax
docs/zh_CN: two minor fixes in zh_CN/doc-guide/
Documentation: dev-tools: Add Testing Overview
docs/zh_CN: add translations in zh_CN/dev-tools/gcov
docs: reporting-issues: make people CC the regressions list
MAINTAINERS: add regressions mailing list
doc:it_IT: align Italian documentation
docs/zh_CN: sync reporting-issues.rst
...
The kernel now has a number of testing and debugging tools, and we've
seen a bit of confusion about what the differences between them are.
Add a basic documentation outlining the testing tools, when to use each,
and how they interact.
This is a pretty quick overview rather than the idealised "kernel
testing guide" that'd probably be optimal, but given the number of times
questions like "When do you use KUnit and when do you use Kselftest?"
are being asked, it seemed worth at least having something. Hopefully
this can form the basis for more detailed documentation later.
Signed-off-by: David Gow <davidgow@google.com>
Reviewed-by: Marco Elver <elver@google.com>
Reviewed-by: Daniel Latypov <dlatypov@google.com>
Link: https://lore.kernel.org/r/20210415054036.581117-1-davidgow@google.com
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Architectures supported by KASAN_HW_TAGS can provide a sync or async mode
of execution. On an MTE enabled arm64 hw for example this can be identified
with the synchronous or asynchronous tagging mode of execution.
In synchronous mode, an exception is triggered if a tag check fault occurs.
In asynchronous mode, if a tag check fault occurs, the TFSR_EL1 register is
updated asynchronously. The kernel checks the corresponding bits
periodically.
KASAN requires a specific kernel command line parameter to make use of this
hw features.
Add KASAN HW execution mode kernel command line parameter.
Note: This patch adds the kasan.mode kernel parameter and the
sync/async kernel command line options to enable the described features.
[ Add a new var instead of exposing kasan_arg_mode to be consistent with
flags for other command line arguments. ]
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Konovalov <andreyknvl@google.com>
Reviewed-by: Andrey Konovalov <andreyknvl@google.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Andrey Konovalov <andreyknvl@google.com>
Tested-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Link: https://lore.kernel.org/r/20210315132019.33202-3-vincenzo.frascino@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Htmldocs does not display the chapter number, convert the two manual
chapter number tags to ref tags.
Signed-off-by: Wu XiangCheng <bobwxc@email.cn>
Acked-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Link: https://lore.kernel.org/r/20210403113752.GA32236@mipc
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
As of commit 359a376081 ("kunit: support failure from dynamic analysis
tools"), we can use current->kunit_test to find the current kunit test.
Mention this in tips.rst and give an example of how this can be used in
conjunction with `test->priv` to pass around state and specifically
implement something like mocking.
There's a lot more we could go into on that topic, but given that
example is already longer than every other "tip" on this page, we just
point to the API docs and leave filling in the blanks as an exercise to
the reader.
Also give an example of kunit_fail_current_test().
Signed-off-by: Daniel Latypov <dlatypov@google.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
The top-level kselftest directory is not called kselftest, but
selftests.
Signed-off-by: Antonio Terceiro <antonio.terceiro@linaro.org>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
All the error message types now have a verbose description.
Also there are two new groups of message types:
- Macros, Attributes and Symbols
- Functions and Variables
Rearrange the message types to fit these new groups as needed.
Signed-off-by: Dwaipayan Ray <dwaipayanray1@gmail.com>
Reviewed-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Link: https://lore.kernel.org/r/20210322082139.33822-1-dwaipayanray1@gmail.com
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Adds missing license and/or copyright headers for KCSAN source files.
Signed-off-by: Marco Elver <elver@google.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Add documentation for kernel script checkpatch.pl.
This documentation is also parsed by checkpatch to
enable a verbose mode.
The checkpatch message types are grouped by usage. Under
each group the types are described briefly. 34 of such
types are documented.
Signed-off-by: Dwaipayan Ray <dwaipayanray1@gmail.com>
Link: https://lore.kernel.org/r/20210226093827.12700-2-dwaipayanray1@gmail.com
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Hwardware tag-based KASAN only reports the first found bug. After that MTE
tag checking gets disabled. Clarify this in comments and documentation.
Link: https://lkml.kernel.org/r/00383ba88a47c3f8342d12263c24bdf95527b07d.1612546384.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Reviewed-by: Marco Elver <elver@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Branislav Rankov <Branislav.Rankov@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Evgenii Stepanov <eugenis@google.com>
Cc: Kevin Brodsky <kevin.brodsky@arm.com>
Cc: Peter Collingbourne <pcc@google.com>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
We cannot rely on CONFIG_DEBUG_KERNEL to decide if we're running a "debug
kernel" where we can safely show potentially sensitive information in the
kernel log.
Instead, simply rely on the newly introduced "no_hash_pointers" to print
unhashed kernel pointers, as well as decide if our reports can include
other potentially sensitive information such as registers and corrupted
bytes.
Link: https://lkml.kernel.org/r/20210223082043.1972742-1-elver@google.com
Signed-off-by: Marco Elver <elver@google.com>
Cc: Timur Tabi <timur@kernel.org>
Cc: Alexander Potapenko <glider@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Andrey Konovalov <andreyknvl@google.com>
Cc: Jann Horn <jannh@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Add KFENCE test suite, testing various error detection scenarios. Makes
use of KUnit for test organization. Since KFENCE's interface to obtain
error reports is via the console, the test verifies that KFENCE outputs
expected reports to the console.
[elver@google.com: fix typo in test]
Link: https://lkml.kernel.org/r/X9lHQExmHGvETxY4@elver.google.com
[elver@google.com: show access type in report]
Link: https://lkml.kernel.org/r/20210111091544.3287013-2-elver@google.com
Link: https://lkml.kernel.org/r/20201103175841.3495947-9-elver@google.com
Signed-off-by: Alexander Potapenko <glider@google.com>
Signed-off-by: Marco Elver <elver@google.com>
Reviewed-by: Dmitry Vyukov <dvyukov@google.com>
Co-developed-by: Alexander Potapenko <glider@google.com>
Reviewed-by: Jann Horn <jannh@google.com>
Cc: Andrey Konovalov <andreyknvl@google.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christopher Lameter <cl@linux.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Hillf Danton <hdanton@sina.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Joern Engel <joern@purestorage.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Paul E. McKenney <paulmck@kernel.org>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: SeongJae Park <sjpark@amazon.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This KUnit update for Linux 5.12-rc1 consists of consists of:
-- support for filtering test suites using glob from Daniel Latypov.
"kunit_filter.glob" command line option is passed to the UML
kernel, which currently only supports filtering by suite name.
This support allows running different subsets of tests, e.g.
$ ./tools/testing/kunit/kunit.py build
$ ./tools/testing/kunit/kunit.py exec 'list*'
$ ./tools/testing/kunit/kunit.py exec 'kunit*'
-- several fixes and cleanups also from Daniel Latypov.
-----BEGIN PGP SIGNATURE-----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=zdch
-----END PGP SIGNATURE-----
Merge tag 'linux-kselftest-kunit-5.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull KUnit updates from Shuah Khan
- support for filtering test suites using glob from Daniel Latypov.
"kunit_filter.glob" command line option is passed to the UML
kernel, which currently only supports filtering by suite name.
This support allows running different subsets of tests, e.g.
$ ./tools/testing/kunit/kunit.py build
$ ./tools/testing/kunit/kunit.py exec 'list*'
$ ./tools/testing/kunit/kunit.py exec 'kunit*'
- several fixes and cleanups also from Daniel Latypov.
* tag 'linux-kselftest-kunit-5.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
kunit: tool: fix unintentional statefulness in run_kernel()
kunit: tool: add support for filtering suites by glob
kunit: add kunit.filter_glob cmdline option to filter suites
kunit: don't show `1 == 1` in failed assertion messages
kunit: make kunit_tool accept optional path to .kunitconfig fragment
Documentation: kunit: add tips.rst for small examples
KUnit: Docs: make start.rst example Kconfig follow style.rst
kunit: tool: simplify kconfig is_subset_of() logic
minor: kunit: tool: fix unit test so it can run from non-root dir
kunit: tool: use `with open()` in unit test
kunit: tool: stop using bare asserts in unit test
kunit: tool: fix unit test cleanup handling
Currently, whether the alloc/free stack traces collection is enabled by
default for hardware tag-based KASAN depends on CONFIG_DEBUG_KERNEL.
The intention for this dependency was to only enable collection on slow
debug kernels due to a significant perf and memory impact.
As it turns out, CONFIG_DEBUG_KERNEL is not considered a debug option
and is enabled on many productions kernels including Android and Ubuntu.
As the result, this dependency is pointless and only complicates the
code and documentation.
Having stack traces collection disabled by default would make the
hardware mode work differently to to the software ones, which is
confusing.
This change removes the dependency and enables stack traces collection
by default.
Looking into the future, this default might makes sense for production
kernels, assuming we implement a fast stack trace collection approach.
Link: https://lkml.kernel.org/r/6678d77ceffb71f1cff2cf61560e2ffe7bb6bfe9.1612808820.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Reviewed-by: Marco Elver <elver@google.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Peter Collingbourne <pcc@google.com>
Cc: Evgenii Stepanov <eugenis@google.com>
Cc: Branislav Rankov <Branislav.Rankov@arm.com>
Cc: Kevin Brodsky <kevin.brodsky@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
./usage.rst contains fairly long examples and explanations of things
like how to fake a class and how to use parameterized tests (and how you
could do table-driven tests yourself).
It's not exactly necessary information, so we add a new page with more
digestible tips like "use kunit_kzalloc() instead of kzalloc() so you
don't have to worry about calling kfree() yourself" and the like.
Change start.rst to point users to this new page first and let them know
that usage.rst is more of optional further reading.
Signed-off-by: Daniel Latypov <dlatypov@google.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
The primary change is that we want to encourage people to respect
KUNIT_ALL_TESTS to make it easy to run all the relevant tests for a
given config.
Signed-off-by: Daniel Latypov <dlatypov@google.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
The initially proposed KASAN command line parameters are redundant.
This change drops the complex "kasan.mode=off/prod/full" parameter and
adds a simpler kill switch "kasan=off/on" instead. The new parameter
together with the already existing ones provides a cleaner way to
express the same set of features.
The full set of parameters with this change:
kasan=off/on - whether KASAN is enabled
kasan.fault=report/panic - whether to only print a report or also panic
kasan.stacktrace=off/on - whether to collect alloc/free stack traces
Default values:
kasan=on
kasan.fault=report
kasan.stacktrace=on (if CONFIG_DEBUG_KERNEL=y)
kasan.stacktrace=off (otherwise)
Link: https://linux-review.googlesource.com/id/Ib3694ed90b1e8ccac6cf77dfd301847af4aba7b8
Link: https://lkml.kernel.org/r/4e9c4a4bdcadc168317deb2419144582a9be6e61.1610736745.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Reviewed-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Reviewed-by: Marco Elver <elver@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Peter Collingbourne <pcc@google.com>
Cc: Evgenii Stepanov <eugenis@google.com>
Cc: Branislav Rankov <Branislav.Rankov@arm.com>
Cc: Kevin Brodsky <kevin.brodsky@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Commit fadb08e7c7 ("kunit: Support for Parameterized Testing")
introduced support but lacks documentation for how to use it.
This patch builds on commit 1f0e943df6 ("Documentation: kunit: provide
guidance for testing many inputs") to show a minimal example of the new
feature.
Signed-off-by: Daniel Latypov <dlatypov@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Tested-by: Brendan Higgins <brendanhiggins@google.com>
Acked-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Merge KASAN updates from Andrew Morton.
This adds a new hardware tag-based mode to KASAN. The new mode is
similar to the existing software tag-based KASAN, but relies on arm64
Memory Tagging Extension (MTE) to perform memory and pointer tagging
(instead of shadow memory and compiler instrumentation).
By Andrey Konovalov and Vincenzo Frascino.
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (60 commits)
kasan: update documentation
kasan, mm: allow cache merging with no metadata
kasan: sanitize objects when metadata doesn't fit
kasan: clarify comment in __kasan_kfree_large
kasan: simplify assign_tag and set_tag calls
kasan: don't round_up too much
kasan, mm: rename kasan_poison_kfree
kasan, mm: check kasan_enabled in annotations
kasan: add and integrate kasan boot parameters
kasan: inline (un)poison_range and check_invalid_free
kasan: open-code kasan_unpoison_slab
kasan: inline random_tag for HW_TAGS
kasan: inline kasan_reset_tag for tag-based modes
kasan: remove __kasan_unpoison_stack
kasan: allow VMAP_STACK for HW_TAGS mode
kasan, arm64: unpoison stack only with CONFIG_KASAN_STACK
kasan: introduce set_alloc_info
kasan: rename get_alloc/free_info
kasan: simplify quarantine_put call site
kselftest/arm64: check GCR_EL1 after context switch
...
- Rework phys/virt translation
- Add KASan support
- Move DT out of linear map region
- Use more PC-relative addressing in assembly
- Remove FP emulation handling while in kernel mode
- Link with '-z norelro'
- remove old check for GCC <= 4.2 in ARM unwinder code
- disable big endian if using clang's linker
-----BEGIN PGP SIGNATURE-----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=fZGX
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux
Pull ARM updates from Russell King:
- Rework phys/virt translation
- Add KASan support
- Move DT out of linear map region
- Use more PC-relative addressing in assembly
- Remove FP emulation handling while in kernel mode
- Link with '-z norelro'
- remove old check for GCC <= 4.2 in ARM unwinder code
- disable big endian if using clang's linker
* tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm: (46 commits)
ARM: 9027/1: head.S: explicitly map DT even if it lives in the first physical section
ARM: 9038/1: Link with '-z norelro'
ARM: 9037/1: uncompress: Add OF_DT_MAGIC macro
ARM: 9036/1: uncompress: Fix dbgadtb size parameter name
ARM: 9035/1: uncompress: Add be32tocpu macro
ARM: 9033/1: arm/smp: Drop the macro S(x,s)
ARM: 9032/1: arm/mm: Convert PUD level pgtable helper macros into functions
ARM: 9031/1: hyp-stub: remove unused .L__boot_cpu_mode_offset symbol
ARM: 9044/1: vfp: use undef hook for VFP support detection
ARM: 9034/1: __div64_32(): straighten up inline asm constraints
ARM: 9030/1: entry: omit FP emulation for UND exceptions taken in kernel mode
ARM: 9029/1: Make iwmmxt.S support Clang's integrated assembler
ARM: 9028/1: disable KASAN in call stack capturing routines
ARM: 9026/1: unwind: remove old check for GCC <= 4.2
ARM: 9025/1: Kconfig: CPU_BIG_ENDIAN depends on !LD_IS_LLD
ARM: 9024/1: Drop useless cast of "u64" to "long long"
ARM: 9023/1: Spelling s/mmeory/memory/
ARM: 9022/1: Change arch/arm/lib/mem*.S to use WEAK instead of .weak
ARM: kvm: replace open coded VA->PA calculations with adr_l call
ARM: head.S: use PC relative insn sequence to calculate PHYS_OFFSET
...
This change updates KASAN documentation to reflect the addition of boot
parameters and also reworks and clarifies some of the existing sections,
in particular: defines what a memory granule is, mentions quarantine,
makes Kunit section more readable.
Link: https://lkml.kernel.org/r/748daf013e17d925b0fe00c1c3b5dce726dd2430.1606162397.git.andreyknvl@google.com
Link: https://linux-review.googlesource.com/id/Ib1f83e91be273264b25f42b04448ac96b858849f
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Reviewed-by: Dmitry Vyukov <dvyukov@google.com>
Reviewed-by: Marco Elver <elver@google.com>
Tested-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Branislav Rankov <Branislav.Rankov@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Evgenii Stepanov <eugenis@google.com>
Cc: Kevin Brodsky <kevin.brodsky@arm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This is a preparatory commit for the upcoming addition of a new hardware
tag-based (MTE-based) KASAN mode.
The new mode won't be using shadow memory, but will still use the concept
of memory granules. Each memory granule maps to a single metadata entry:
8 bytes per one shadow byte for generic mode, 16 bytes per one shadow byte
for software tag-based mode, and 16 bytes per one allocation tag for
hardware tag-based mode.
Rename KASAN_SHADOW_SCALE_SIZE to KASAN_GRANULE_SIZE, and
KASAN_SHADOW_MASK to KASAN_GRANULE_MASK.
Also use MASK when used as a mask, otherwise use SIZE.
No functional changes.
Link: https://lkml.kernel.org/r/939b5754e47f528a6e6a6f28ffc5815d8d128033.1606161801.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Reviewed-by: Marco Elver <elver@google.com>
Reviewed-by: Alexander Potapenko <glider@google.com>
Tested-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Branislav Rankov <Branislav.Rankov@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Evgenii Stepanov <eugenis@google.com>
Cc: Kevin Brodsky <kevin.brodsky@arm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This kunit update for Linux 5.11-rc1 consists of:
-- documentation update and fix to kunit_tool to parse diagnostic
messages correctly from David Gow
-- Support for Parameterized Testing and fs/ext4 test updates to use
KUnit parameterized testing feature from Arpitha Raghunandan
-- Helper to derive file names depending on --build_dir argument
from Andy Shevchenko
-----BEGIN PGP SIGNATURE-----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=jqjK
-----END PGP SIGNATURE-----
Merge tag 'linux-kselftest-kunit-5.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull Kunit updates from Shuah Khan:
- documentation update and fix to kunit_tool to parse diagnostic
messages correctly from David Gow
- Support for Parameterized Testing and fs/ext4 test updates to use
KUnit parameterized testing feature from Arpitha Raghunandan
- Helper to derive file names depending on --build_dir argument from
Andy Shevchenko
* tag 'linux-kselftest-kunit-5.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
fs: ext4: Modify inode-test.c to use KUnit parameterized testing feature
kunit: Support for Parameterized Testing
kunit: kunit_tool: Correctly parse diagnostic messages
Documentation: kunit: provide guidance for testing many inputs
kunit: Introduce get_file_path() helper
Make each UBSAN option individually selectable and remove UBSAN_MISC which
no longer has any purpose. Add help text for each Kconfig, and include a
reference to the Clang sanitizer documentation. Disable unsigned overflow
by default (not available with GCC and makes x86 unbootable with Clang).
Disable unreachable when objtool is in use (redundant and confuses things:
instrumentation appears at unreachable locations).
Link: https://lkml.kernel.org/r/20201203004437.389959-7-keescook@chromium.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: George Popescu <georgepope@android.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Marco Elver <elver@google.com>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Michal Marek <michal.lkml@markovi.net>
Cc: Nathan Chancellor <natechancellor@gmail.com>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Peter Oberparleiter <oberpar@linux.ibm.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Merge misc updates from Andrew Morton:
- a few random little subsystems
- almost all of the MM patches which are staged ahead of linux-next
material. I'll trickle to post-linux-next work in as the dependents
get merged up.
Subsystems affected by this patch series: kthread, kbuild, ide, ntfs,
ocfs2, arch, and mm (slab-generic, slab, slub, dax, debug, pagecache,
gup, swap, shmem, memcg, pagemap, mremap, hmm, vmalloc, documentation,
kasan, pagealloc, memory-failure, hugetlb, vmscan, z3fold, compaction,
oom-kill, migration, cma, page-poison, userfaultfd, zswap, zsmalloc,
uaccess, zram, and cleanups).
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (200 commits)
mm: cleanup kstrto*() usage
mm: fix fall-through warnings for Clang
mm: slub: convert sysfs sprintf family to sysfs_emit/sysfs_emit_at
mm: shmem: convert shmem_enabled_show to use sysfs_emit_at
mm:backing-dev: use sysfs_emit in macro defining functions
mm: huge_memory: convert remaining use of sprintf to sysfs_emit and neatening
mm: use sysfs_emit for struct kobject * uses
mm: fix kernel-doc markups
zram: break the strict dependency from lzo
zram: add stat to gather incompressible pages since zram set up
zram: support page writeback
mm/process_vm_access: remove redundant initialization of iov_r
mm/zsmalloc.c: rework the list_add code in insert_zspage()
mm/zswap: move to use crypto_acomp API for hardware acceleration
mm/zswap: fix passing zero to 'PTR_ERR' warning
mm/zswap: make struct kernel_param_ops definitions const
userfaultfd/selftests: hint the test runner on required privilege
userfaultfd/selftests: fix retval check for userfaultfd_open()
userfaultfd/selftests: always dump something in modes
userfaultfd: selftests: make __{s,u}64 format specifiers portable
...
Generic KASAN also supports to record the last two workqueue stacks and
print them in KASAN report. So that need to update documentation.
Link: https://lkml.kernel.org/r/20201203023037.30792-1-walter-zh.wu@mediatek.com
Signed-off-by: Walter Wu <walter-zh.wu@mediatek.com>
Suggested-by: Marco Elver <elver@google.com>
Acked-by: Marco Elver <elver@google.com>
Reviewed-by: Dmitry Vyukov <dvyukov@google.com>
Reviewed-by: Andrey Konovalov <andreyknvl@google.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Lai Jiangshan <jiangshanlai@gmail.com>
Cc: Matthias Brugger <matthias.bgg@gmail.com>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
of the churn behind us. Significant stuff in this pull includes:
- A set of new Chinese translations
- Italian translation updates
- A mechanism from Mauro to automatically format Documentation/features
for the built docs
- Automatic cross references without explicit :ref: markup
- A new reset-controller document
- An extensive new document on reporting problems from Thorsten
That last patch also adds the CC-BY-4.0 license to LICENSES/dual; there was
some discussion on this, but we seem to have consensus and an ack from Greg
for that addition.
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEIw+MvkEiF49krdp9F0NaE2wMflgFAl/XyewPHGNvcmJldEBs
d24ubmV0AAoJEBdDWhNsDH5YUeYH/AiNNlVIF/80T45TAkm+1kpy2Fb+d/5wbtGK
PB7OTXPyDmmqwZNldlF9IsRhp5W+wYC3PNlulYMG44hT7/Jqf2CMFw8SOZqGLmBV
LhWwoS+TAWLB19IOOMrVXbhAlNsX01NwBDY/dwONjW1Jcu+tuAsBR47T9lKjw4kJ
qGFGMQTvZG9Ig1x7E6X38mAd7W3SD1viNuUePS2YcoB15GAocWfVVHvu1r+RHUTS
27ET8tWzMMuiaCAD6toVY9L4T7iCI7YSPXQm8BOkf/f4LXDnpo8Fo11LE5ozTAh3
+avnNt8vnrRXc06MnzwsvNHm2TqN97B4shkeDiPAV3ySXI8Zu/w=
=HScX
-----END PGP SIGNATURE-----
Merge tag 'docs-5.11' of git://git.lwn.net/linux
Pull documentation updates from Jonathan Corbet:
"A much quieter cycle for documentation (happily), with, one hopes, the
bulk of the churn behind us. Significant stuff in this pull includes:
- A set of new Chinese translations
- Italian translation updates
- A mechanism from Mauro to automatically format
Documentation/features for the built docs
- Automatic cross references without explicit :ref: markup
- A new reset-controller document
- An extensive new document on reporting problems from Thorsten
That last patch also adds the CC-BY-4.0 license to LICENSES/dual;
there was some discussion on this, but we seem to have consensus and
an ack from Greg for that addition"
* tag 'docs-5.11' of git://git.lwn.net/linux: (50 commits)
docs: fix broken cross reference in translations/zh_CN
docs: Note that sphinx 1.7 will be required soon
docs: update requirements to install six module
docs: reporting-issues: move 'outdated, need help' note to proper place
docs: Update documentation to reflect what TAINT_CPU_OUT_OF_SPEC means
docs: add a reset controller chapter to the driver API docs
docs: make reporting-bugs.rst obsolete
docs: Add a new text describing how to report bugs
LICENSES: Add the CC-BY-4.0 license
Documentation: fix multiple typos found in the admin-guide subdirectory
Documentation: fix typos found in admin-guide subdirectory
kernel-doc: Fix example in Nested structs/unions
docs: clean up sysctl/kernel: titles, version
docs: trace: fix event state structure name
docs: nios2: add missing ReST file
scripts: get_feat.pl: reduce table width for all features output
scripts: get_feat.pl: change the group by order
scripts: get_feat.pl: make complete table more coincise
scripts: kernel-doc: fix parsing function-like typedefs
Documentation: fix typos found in process, dev-tools, and doc-guide subdirectories
...
Fix four typos in kcov.rst, sphinx.rst, clang-format.rst, and embargoed-hardware-issues.rst
Signed-off-by: Andrew Klychkov <andrew.a.klychkov@gmail.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Miguel Ojeda <ojeda@kernel.org>
Link: https://lore.kernel.org/r/20201202075438.GA35516@spblnx124.lan
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Modify Coccinelle documentation to clarify usage of make command to
run coccicheck on a folder.
Changes in v2:
- Give example of folder instead of file
- Add note
Signed-off-by: Sumera Priyadarsini <sylphrenadin@gmail.com>
Link: https://lore.kernel.org/r/20201126075730.w6brpeuviefmsxhl@adolin
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
usage.rst goes into a detailed section about faking out classes, but
currently lacks wording about how one might idiomatically test a range
of inputs.
Add a new chapter for "Common Patterns" and group "Isolating behvaior"
and this new section under there.
Give an example of how one might test a hash function via macros/helper
funcs and a table-driven test and very briefly discuss pros and cons.
Also highlight the KUNIT_EXPECT_*_MSG() variants (that aren't mentioned
elsewhere [1]) which are particularly useful in these situations.
It is also criminally underused at the moment, only appearing in 2
tests (both written by people involved in KUnit).
[1] not even on
https://www.kernel.org/doc/html/latest/dev-tools/kunit/api/test.html
Signed-off-by: Daniel Latypov <dlatypov@google.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
This Kunit update for Linux 5.10-rc5 consists of several fixes Kunit
documentation, tool, compile time fixes not pollute source directory,
and fix to remove tools/testing/kunit/.gitattributes file.
-----BEGIN PGP SIGNATURE-----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=mGWU
-----END PGP SIGNATURE-----
Merge tag 'linux-kselftest-kunit-fixes-5.10-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull Kunit fixes from Shuah Khan:
"Several fixes to Kunit documentation and tools, and to not pollute
the source directory.
Also remove the incorrect kunit .gitattributes file"
* tag 'linux-kselftest-kunit-fixes-5.10-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
kunit: fix display of failed expectations for strings
kunit: tool: fix extra trailing \n in raw + parsed test output
kunit: tool: print out stderr from make (like build warnings)
KUnit: Docs: usage: wording fixes
KUnit: Docs: style: fix some Kconfig example issues
KUnit: Docs: fix a wording typo
kunit: Do not pollute source directory with generated files (test.log)
kunit: Do not pollute source directory with generated files (.kunitconfig)
kunit: tool: fix pre-existing python type annotation errors
kunit: Fix kunit.py parse subcommand (use null build_dir)
kunit: tool: unmark test_data as binary blobs
Fix the Kconfig example to be closer to Kconfig coding style.
Also add punctuation and a trailing slash ('/') to a sub-directory
name -- this is how the text mostly appears in other Kconfig files.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: David Gow <davidgow@google.com>
Cc: linux-kselftest@vger.kernel.org
Cc: kunit-dev@googlegroups.com
Cc: Shuah Khan <shuah@kernel.org>
Cc: Shuah Khan <skhan@linuxfoundation.org>
Cc: Brendan Higgins <brendanhiggins@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
This Kunit update for Linux 5.10-rc3 consists of several kunit_tool
and documentation fixes.
-----BEGIN PGP SIGNATURE-----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=2gLZ
-----END PGP SIGNATURE-----
Merge tag 'linux-kselftest-kunit-fixes-5.10-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull Kunit fixes from Shuah Khan:
"Several kunit_tool and documentation fixes"
* tag 'linux-kselftest-kunit-fixes-5.10-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
kunit: tools: fix kunit_tool tests for parsing test plans
Documentation: kunit: Update Kconfig parts for KUNIT's module support
kunit: test: fix remaining kernel-doc warnings
kunit: Don't fail test suites if one of them is empty
kunit: Fix kunit.py --raw_output option
literal blocks should start and end with a blank line,
as otherwise the parser complains and may do the wrong
thing, as warned by Sphinx:
Documentation/dev-tools/kasan.rst:298: WARNING: Literal block ends without a blank line; unexpected unindent.
Documentation/dev-tools/kasan.rst:303: WARNING: Literal block ends without a blank line; unexpected unindent.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Reviewed-by: Andrey Konovalov <andreyknvl@google.com>
Link: https://lore.kernel.org/r/cd6c4280fe26b07f2c5e5ed2918e17e88bb03419.1603791716.git.mchehab+huawei@kernel.org
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
If 'CONFIG_KUNIT=m', letting kunit tests that do not support loadable
module build depends on 'KUNIT' instead of 'KUNIT=y' result in compile
errors. This commit updates the document for this.
Fixes: 9fe124bf1b ("kunit: allow kunit to be loaded as a module")
Signed-off-by: SeongJae Park <sjpark@amazon.de>
Reviewed-by: David Gow <davidgow@google.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
This Kunit update for Linux 5.10-rc1 consists of:
- add Kunit to kernel_init() and remove KUnit from init calls entirely.
This addresses the concern Kunit would not work correctly during
late init phase.
- add a linker section where KUnit can put references to its test suites.
This patch is the first step in transitioning to dispatching all KUnit
tests from a centralized executor rather than having each as its own
separate late_initcall.
- add a centralized executor to dispatch tests rather than relying on
late_initcall to schedule each test suite separately. Centralized
execution is for built-in tests only; modules will execute tests when
loaded.
- convert bitfield test to use KUnit framework
- Documentation updates for naming guidelines and how kunit_test_suite()
works.
- add test plan to KUnit TAP format
-----BEGIN PGP SIGNATURE-----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=0Sco
-----END PGP SIGNATURE-----
Merge tag 'linux-kselftest-kunit-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull more Kunit updates from Shuah Khan:
- add Kunit to kernel_init() and remove KUnit from init calls entirely.
This addresses the concern that Kunit would not work correctly during
late init phase.
- add a linker section where KUnit can put references to its test
suites.
This is the first step in transitioning to dispatching all KUnit
tests from a centralized executor rather than having each as its own
separate late_initcall.
- add a centralized executor to dispatch tests rather than relying on
late_initcall to schedule each test suite separately. Centralized
execution is for built-in tests only; modules will execute tests when
loaded.
- convert bitfield test to use KUnit framework
- Documentation updates for naming guidelines and how
kunit_test_suite() works.
- add test plan to KUnit TAP format
* tag 'linux-kselftest-kunit-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
lib: kunit: Fix compilation test when using TEST_BIT_FIELD_COMPILE
lib: kunit: add bitfield test conversion to KUnit
Documentation: kunit: add a brief blurb about kunit_test_suite
kunit: test: add test plan to KUnit TAP format
init: main: add KUnit to kernel init
kunit: test: create a single centralized executor for all tests
vmlinux.lds.h: add linker section for KUnit test suites
Documentation: kunit: Add naming guidelines
-----BEGIN PGP SIGNATURE-----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=26wi
-----END PGP SIGNATURE-----
Merge tag 'docs/v5.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull documentation updates from Mauro Carvalho Chehab:
"A series of patches addressing warnings produced by make htmldocs.
This includes:
- kernel-doc markup fixes
- ReST fixes
- Updates at the build system in order to support newer versions of
the docs build toolchain (Sphinx)
After this series, the number of html build warnings should reduce
significantly, and building with Sphinx 3.1 or later should now be
supported (although it is still recommended to use Sphinx 2.4.4).
As agreed with Jon, I should be sending you a late pull request by the
end of the merge window addressing remaining issues with docs build,
as there are a number of warning fixes that depends on pull requests
that should be happening along the merge window.
The end goal is to have a clean htmldocs build on Kernel 5.10.
PS. It should be noticed that Sphinx 3.0 is not currently supported,
as it lacks support for C domain namespaces. Such feature, needed in
order to document uAPI system calls with Sphinx 3.x, was added only on
Sphinx 3.1"
* tag 'docs/v5.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (75 commits)
PM / devfreq: remove a duplicated kernel-doc markup
mm/doc: fix a literal block markup
workqueue: fix a kernel-doc warning
docs: virt: user_mode_linux_howto_v2.rst: fix a literal block markup
Input: sparse-keymap: add a description for @sw
rcu/tree: docs: document bkvcache new members at struct kfree_rcu_cpu
nl80211: docs: add a description for s1g_cap parameter
usb: docs: document altmode register/unregister functions
kunit: test.h: fix a bad kernel-doc markup
drivers: core: fix kernel-doc markup for dev_err_probe()
docs: bio: fix a kerneldoc markup
kunit: test.h: solve kernel-doc warnings
block: bio: fix a warning at the kernel-doc markups
docs: powerpc: syscall64-abi.rst: fix a malformed table
drivers: net: hamradio: fix document location
net: appletalk: Kconfig: Fix docs location
dt-bindings: fix references to files converted to yaml
memblock: get rid of a :c:type leftover
math64.h: kernel-docs: Convert some markups into normal comments
media: uAPI: buffer.rst: remove a left-over documentation
...
This kselftest update for Linux 5.10-rc1 consists of enhancements to
-- speed up headers_install done during selftest build
-- add generic make nesting support
-- add support to select individual tests:
- Selftests build/install generates run_kselftest.sh script to run
selftests on a target system. Currently the script doesn't have
support for selecting individual tests. Add support for it.
With this enhancement, user can select test collections (or tests)
individually. e.g:
run_kselftest.sh -c seccomp -t timers:posix_timers -t timers:nanosleep
Additionally adds a way to list all known tests with "-l", usage
with "-h", and perform a dry run without running tests with "-n".
-----BEGIN PGP SIGNATURE-----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=pf0+
-----END PGP SIGNATURE-----
Merge tag 'linux-kselftest-next-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull kselftest updates from Shuah Khan:
- speed up headers_install done during selftest build
- add generic make nesting support
- add support to select individual tests:
Selftests build/install generates run_kselftest.sh script to run
selftests on a target system. Currently the script doesn't have
support for selecting individual tests. Add support for it.
With this enhancement, user can select test collections (or tests)
individually. e.g:
run_kselftest.sh -c seccomp -t timers:posix_timers -t timers:nanosleep
Additionally adds a way to list all known tests with "-l", usage with
"-h", and perform a dry run without running tests with "-n".
* tag 'linux-kselftest-next-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
doc: dev-tools: kselftest.rst: Update examples and paths
selftests/run_kselftest.sh: Make each test individually selectable
selftests: Extract run_kselftest.sh and generate stand-alone test list
selftests: Add missing gitignore entries
selftests: more general make nesting support
selftests: use "$(MAKE)" instead of "make" for headers_install
Which Sphinx 3, :c:type: can't be used anymore for structs,
as this should be used only for typedefs.
Rely on automarkup.py for struct references.
This file has an special case, though: it uses the tag also
to point to an array. Let's use, instead, :c:expr: for such
purpose, as it should do the right thing.
This should fix this warning:
./Documentation/dev-tools/kgdb.rst:875: WARNING: Unparseable C cross-reference: 'kdb_poll_funcs[]'
Invalid C declaration: Expected end of definition. [error at 14]
kdb_poll_funcs[]
--------------^
Acked-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
kmemleak-test.c is just a kmemleak test module, which also can not be used
as a built-in kernel module. Thus, i think it may should not be in mm
dir, and move the kmemleak-test.c to samples/kmemleak/kmemleak-test.c.
Fix the spelling of built-in by the way.
Signed-off-by: Hui Su <sh_def@163.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Cc: David S. Miller <davem@davemloft.net>
Cc: Rob Herring <robh@kernel.org>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
Cc: Divya Indi <divya.indi@oracle.com>
Cc: Tomas Winkler <tomas.winkler@intel.com>
Cc: David Howells <dhowells@redhat.com>
Link: https://lkml.kernel.org/r/20200925183729.GA172837@rlk
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Since the kernel now requires at least Clang 10.0.1, remove any mention of
old Clang versions and simplify the documentation.
Signed-off-by: Marco Elver <elver@google.com>
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Andrey Konovalov <andreyknvl@google.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Nathan Chancellor <natechancellor@gmail.com>
Cc: Fangrui Song <maskray@google.com>
Cc: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
Cc: Sedat Dilek <sedat.dilek@gmail.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Will Deacon <will@kernel.org>
Link: https://lkml.kernel.org/r/20200902225911.209899-7-ndesaulniers@google.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Add a brief blurb saying how and when the kunit_test_suite() macro
works to the usage documentation.
Signed-off-by: Brendan Higgins <brendanhiggins@google.com>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
As discussed in [1], KUnit tests have hitherto not had a particularly
consistent naming scheme. This adds documentation outlining how tests
and test suites should be named, including how those names should be
used in Kconfig entries and filenames.
[1]:
https://lore.kernel.org/linux-kselftest/202006141005.BA19A9D3@keescook/t/#u
Signed-off-by: David Gow <davidgow@google.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Reviewed-by: Marco Elver <elver@google.com>
Reviewed-by: Tim Bird <tim.bird@sony.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Update the installation commands and path details, detail the new
options available in the run_kselftests.sh script.
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEIw+MvkEiF49krdp9F0NaE2wMflgFAl81p3sPHGNvcmJldEBs
d24ubmV0AAoJEBdDWhNsDH5YTDAH/i+boeUlQsiobPcnfF7jxjQWd2wy9GVT6y7k
RQsifOIIsJZB8DN/ChYbeFemtnn495HaIrwN4QvQss82A2NpaGYCRR8D4vncqLHL
1K36JLHE/5dOFvaKUvAVIquEcwuyvmRNU0Bbyz/3kzNUf8KkovDzoJ7xZ/2n/fev
hksn3RChj1osJNViSGBkHEjF6NJ46gzNtbt4mW88/jDZNCENK7rZQWbwUvrvZ4ze
B1LfMFYuZhm6s4sooBxO6y2njuzmKLoykM9MQFr5PXLuexHTcMlS5mpHVqvQsJ8l
70G2zXZiGUwxboC1YW7aRUEhkASVsXTb077zOVYXWY6duUqWVFs=
=tuId
-----END PGP SIGNATURE-----
Merge tag 'docs-5.9-2' of git://git.lwn.net/linux
Pull documentation fixes from Jonathan Corbet:
"A handful of obvious fixes that wandered in during the merge window"
* tag 'docs-5.9-2' of git://git.lwn.net/linux:
Documentation/locking/locktypes: fix the typo
doc/zh_CN: resolve undefined label warning in admin-guide index
doc/zh_CN: fix title heading markup in admin-guide cpu-load
docs: remove the 2.6 "Upgrading I2C Drivers" guide
docs: Correct the release date of 5.2 stable
mailmap: Update comments for with format and more detalis
docs: cdrom: Fix a typo and rst markup
Doc: admin-guide: use correct legends in kernel-parameters.txt
Documentation/features: refresh RISC-V arch support files
documentation: coccinelle: Improve command example for make C={1,2}
Core-api: Documentation: Replace deprecated :c:func: Usage
Dev-tools: Documentation: Replace deprecated :c:func: Usage
Filesystems: Documentation: Replace deprecated :c:func: Usage
docs: trace: fix a typo
Modify coccinelle documentation to further clarify
the usage of the makefile C variable by coccicheck.
Signed-off-by: Sumera Priyadarsini <sylphrenadin@gmail.com>
Acked-by: Julia Lawall <julia.lawall@inria.fr>
Link: https://lore.kernel.org/r/20200811002350.5553-1-sylphrenadin@gmail.com
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Generic KASAN will support to record the last two call_rcu() call stacks
and print them in KASAN report. So that need to update documentation.
Signed-off-by: Walter Wu <walter-zh.wu@mediatek.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Tested-by: Dmitry Vyukov <dvyukov@google.com>
Reviewed-by: Dmitry Vyukov <dvyukov@google.com>
Reviewed-by: Andrey Konovalov <andreyknvl@google.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Matthias Brugger <matthias.bgg@gmail.com>
Cc: "Paul E . McKenney" <paulmck@kernel.org>
Cc: Josh Triplett <josh@joshtriplett.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Lai Jiangshan <jiangshanlai@gmail.com>
Cc: Joel Fernandes <joel@joelfernandes.org>
Link: http://lkml.kernel.org/r/20200601051111.1359-1-walter-zh.wu@mediatek.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This Kunit update for Linux 5.9-rc1 consists of:
- Adds a generic kunit_resource API extending it to support
resources that are passed in to kunit in addition kunit
allocated resources. In addition, KUnit resources are now
refcounted to avoid passed in resources being released while
in use by kunit.
- Add support for named resources.
- Important bug fixes from Brendan Higgins and Will Chen
-----BEGIN PGP SIGNATURE-----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=kIIk
-----END PGP SIGNATURE-----
Merge tag 'linux-kselftest-kunit-5.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull kunit updates from Shuah Khan:
- Add a generic kunit_resource API extending it to support resources
that are passed in to kunit in addition kunit allocated resources. In
addition, KUnit resources are now refcounted to avoid passed in
resources being released while in use by kunit.
- Add support for named resources.
- Important bug fixes from Brendan Higgins and Will Chen
* tag 'linux-kselftest-kunit-5.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
kunit: tool: fix improper treatment of file location
kunit: tool: fix broken default args in unit tests
kunit: capture stderr on all make subprocess calls
Documentation: kunit: Remove references to --defconfig
kunit: add support for named resources
kunit: generalize kunit_resource API beyond allocated resources
while to come. Changes include:
- Some new Chinese translations
- Progress on the battle against double words words and non-HTTPS URLs
- Some block-mq documentation
- More RST conversions from Mauro. At this point, that task is
essentially complete, so we shouldn't see this kind of churn again for a
while. Unless we decide to switch to asciidoc or something...:)
- Lots of typo fixes, warning fixes, and more.
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEIw+MvkEiF49krdp9F0NaE2wMflgFAl8oVkwPHGNvcmJldEBs
d24ubmV0AAoJEBdDWhNsDH5YoW8H/jJ/xnXFn7tkgVPQAlL3k5HCnK7A5nDP9RVR
cg1pTx1cEFdjzxPlJyExU6/v+AImOvtweHXC+JDK7YcJ6XFUNYXJI3LxL5KwUXbY
BL/xRFszDSXH2C7SJF5GECcFYp01e/FWSLN3yWAh+g+XwsKiTJ8q9+CoIDkHfPGO
7oQsHKFu6s36Af0LfSgxk4sVB7EJbo8e4psuPsP5SUrl+oXRO43Put0rXkR4yJoH
9oOaB51Do5fZp8I4JVAqGXvpXoExyLMO4yw0mASm6YSZ3KyjR8Fae+HD9Cq4ZuwY
0uzb9K+9NEhqbfwtyBsi99S64/6Zo/MonwKwevZuhtsDTK4l4iU=
=JQLZ
-----END PGP SIGNATURE-----
Merge tag 'docs-5.9' of git://git.lwn.net/linux
Pull documentation updates from Jonathan Corbet:
"It's been a busy cycle for documentation - hopefully the busiest for a
while to come. Changes include:
- Some new Chinese translations
- Progress on the battle against double words words and non-HTTPS
URLs
- Some block-mq documentation
- More RST conversions from Mauro. At this point, that task is
essentially complete, so we shouldn't see this kind of churn again
for a while. Unless we decide to switch to asciidoc or
something...:)
- Lots of typo fixes, warning fixes, and more"
* tag 'docs-5.9' of git://git.lwn.net/linux: (195 commits)
scripts/kernel-doc: optionally treat warnings as errors
docs: ia64: correct typo
mailmap: add entry for <alobakin@marvell.com>
doc/zh_CN: add cpu-load Chinese version
Documentation/admin-guide: tainted-kernels: fix spelling mistake
MAINTAINERS: adjust kprobes.rst entry to new location
devices.txt: document rfkill allocation
PCI: correct flag name
docs: filesystems: vfs: correct flag name
docs: filesystems: vfs: correct sync_mode flag names
docs: path-lookup: markup fixes for emphasis
docs: path-lookup: more markup fixes
docs: path-lookup: fix HTML entity mojibake
CREDITS: Replace HTTP links with HTTPS ones
docs: process: Add an example for creating a fixes tag
doc/zh_CN: add Chinese translation prefer section
doc/zh_CN: add clearing-warn-once Chinese version
doc/zh_CN: add admin-guide index
doc:it_IT: process: coding-style.rst: Correct __maybe_unused compiler label
futex: MAINTAINERS: Re-add selftests directory
...
Pull v5.9 KCSAN bits from Paul E. McKenney.
Perhaps the most important change is that GCC 11 now has all fixes in place
to support KCSAN, so GCC support can be enabled again.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Rationale:
Reduces attack surface on kernel devs opening the links for MITM
as HTTPS traffic is much harder to manipulate.
Deterministic algorithm:
For each file:
If not .svg:
For each line:
If doesn't contain `\bxmlns\b`:
For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`:
If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`:
If both the HTTP and HTTPS versions
return 200 OK and serve the same content:
Replace HTTP with HTTPS.
Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de>
Link: https://lore.kernel.org/r/20200708161839.15170-1-grandmaster@al2klimov.de
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Drop the doubled word "driver".
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Acked-by: Daniel Thompson <daniel.thompson@linaro.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: linux-doc@vger.kernel.org
Cc: Jason Wessel <jason.wessel@windriver.com>
Cc: Daniel Thompson <daniel.thompson@linaro.org>
Cc: Douglas Anderson <dianders@chromium.org>
Cc: kgdb-bugreport@lists.sourceforge.net
Link: https://lore.kernel.org/r/20200707180414.10467-5-rdunlap@infradead.org
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Sparse's home page used to be a wiki (sparse.wiki.kernel.org)
but this wiki only contained a short intro and the release notes.
But nowadays, sparse's main page is sparse.docs.kernel.org,
which contains all what was in the wiki but also other documentation,
mainly oriented about sparse's internals.
So, add a link to this in the kernel documentation.
Signed-off-by: Luc Van Oostenryck <luc.vanoostenryck@gmail.com>
Acked-by: Mike Rapoport <rppt@linux.ibm.com>
Link: https://lore.kernel.org/r/20200629161310.89783-1-luc.vanoostenryck@gmail.com
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Replace the manually curated list for supported archs in
Documentation/dev-tools/kmemleak.rst by a Documentation/features entry.
Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Link: https://lore.kernel.org/r/20200627091510.28210-1-tklauser@distanz.ch
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Fix various typos etc. in dev-tools/coccinelle.rst:
- punctuation, grammar, wording
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Julia Lawall <julia.lawall@inria.fr>
Link: https://lore.kernel.org/r/def28907-18b9-5b7a-e743-79b0418c946c@infradead.org
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
This kunit fixes update for Linux 5.8-rc4 consists of fixes to build
and run-times failures. Also includes troubleshooting tips updates
to kunit user documentation.
-----BEGIN PGP SIGNATURE-----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=XeG4
-----END PGP SIGNATURE-----
Merge tag 'linux-kselftest-kunit-fixes-5.8-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull kunit fixes from Shuah Khan
"Fixes for build and run-times failures.
Also includes troubleshooting tips updates to kunit user
documentation"
* tag 'linux-kselftest-kunit-fixes-5.8-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
Documentation: kunit: Add some troubleshooting tips to the FAQ
kunit: kunit_tool: Fix invalid result when build fails
kunit: show error if kunit results are not present
kunit: kunit_config: Fix parsing of CONFIG options with space
The URL given to get sparse's tarballs is sparse.wiki.kernel.org
but the wiki will is deprecated in favor of sparse.docs.kernel.org.
So, update this URL to the one where the tarballs can directly
be found.
Signed-off-by: Luc Van Oostenryck <luc.vanoostenryck@gmail.com>
Link: https://lore.kernel.org/r/20200621153330.54480-1-luc.vanoostenryck@gmail.com
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
There are no more user of this function attribute, also, with us now
actively supporting '__no_kcsan inline' it doesn't make sense to have
in any case.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Document change in required compiler version for KCSAN, and remove the
now redundant note about __no_kcsan and inlining problems with older
compilers.
Signed-off-by: Marco Elver <elver@google.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Will Deacon <will@kernel.org>
Link: https://lkml.kernel.org/r/20200521142047.169334-8-elver@google.com
Merge the state of the locking kcsan branch before the read/write_once()
and the atomics modifications got merged.
Squash the fallout of the rebase on top of the read/write once and atomic
fallback work into the merge. The history of the original branch is
preserved in tag locking-kcsan-2020-06-02.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
HTTP links to HTTPS that had to be yanked and redone before the first
pull.
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEIw+MvkEiF49krdp9F0NaE2wMflgFAl7hRs0PHGNvcmJldEBs
d24ubmV0AAoJEBdDWhNsDH5YEE0H/jlTBzV3kkf09nzngka07kUlXTsd5kkQjXNr
sr0zV4q7o70Hc9mv8r5m5suBFuQ+2rx9Oy2BB4ywOAFIXMkhycCzj/v+tkBLav2s
+oJ6ytSAnFIoyfChq+ynX2ub0VEE86zxafGaL1xt0SwRt/hSAQWXmfN3m8DorqF3
bXn2WzKhBxPhjxrRUhzgQVyXnEUbONshFzng7E0OtKMbOw7ftEdh18JdZ2M/KQwH
DPD+wtmzns/uUUarkC/fmaj8JLD1Bq5X9VTpkz0YU151GX1P4mbMZcWSA8/QHnoS
B21LMa58itBsQxchN7LvdnkbDj3GIUzDiXsLt9VXMOd+TK4TyhE=
=mp4N
-----END PGP SIGNATURE-----
Merge tag 'docs-5.8-2' of git://git.lwn.net/linux
Pull more documentation updates from Jonathan Corbet:
"A handful of late-arriving docs fixes, along with a patch changing a
lot of HTTP links to HTTPS that had to be yanked and redone before the
first pull"
* tag 'docs-5.8-2' of git://git.lwn.net/linux:
docs/memory-barriers.txt/kokr: smp_mb__{before,after}_atomic(): update Documentation
Documentation: devres: add missing entry for devm_platform_get_and_ioremap_resource()
Replace HTTP links with HTTPS ones: documentation
docs: it_IT: address invalid reference warnings
doc: zh_CN: use doc reference to resolve undefined label warning
docs: Update the location of the LF NDA program
docs: dev-tools: coccinelle: underlines
This Kunit update for Linux 5.8-rc1 consists of:
- Several config fragment fixes from Anders Roxell to improve
test coverage.
- Improvements to kunit run script to use defconfig as default and
restructure the code for config/build/exec/parse from Vitor Massaru Iha
and David Gow.
- Miscellaneous documentation warn fix.
-----BEGIN PGP SIGNATURE-----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=S+HY
-----END PGP SIGNATURE-----
Merge tag 'linux-kselftest-kunit-5.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull Kunit updates from Shuah Khan:
"This consists of:
- Several config fragment fixes from Anders Roxell to improve test
coverage.
- Improvements to kunit run script to use defconfig as default and
restructure the code for config/build/exec/parse from Vitor Massaru
Iha and David Gow.
- Miscellaneous documentation warn fix"
* tag 'linux-kselftest-kunit-5.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
security: apparmor: default KUNIT_* fragments to KUNIT_ALL_TESTS
fs: ext4: default KUNIT_* fragments to KUNIT_ALL_TESTS
drivers: base: default KUNIT_* fragments to KUNIT_ALL_TESTS
lib: Kconfig.debug: default KUNIT_* fragments to KUNIT_ALL_TESTS
kunit: default KUNIT_* fragments to KUNIT_ALL_TESTS
kunit: Kconfig: enable a KUNIT_ALL_TESTS fragment
kunit: Fix TabError, remove defconfig code and handle when there is no kunitconfig
kunit: use KUnit defconfig by default
kunit: use --build_dir=.kunit as default
Documentation: test.h - fix warnings
kunit: kunit_tool: Separate out config/build/exec/parse
This Kselftest update for Linux 5.8-rc1 consists of:
- Several fixes from Masami Hiramatsu to improve coverage for
lib and sysctl tests.
- Clean up to vdso test and a new test for getcpu() from Mark Brown.
- Add new gen_tar selftests Makefile target generate selftest package
running "make gen_tar" in selftests directory from Veronika Kabatova.
- Other miscellaneous fixes to timens, exec, tpm2 tests.
-----BEGIN PGP SIGNATURE-----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=IB5c
-----END PGP SIGNATURE-----
Merge tag 'linux-kselftest-5.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull kselftest updates from Shuah Khan:
"This consists of:
- Several fixes from Masami Hiramatsu to improve coverage for lib and
sysctl tests.
- Clean up to vdso test and a new test for getcpu() from Mark Brown.
- Add new gen_tar selftests Makefile target generate selftest package
running "make gen_tar" in selftests directory from Veronika
Kabatova.
- Other miscellaneous fixes to timens, exec, tpm2 tests"
* tag 'linux-kselftest-5.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
selftests/sysctl: Make sysctl test driver as a module
selftests/sysctl: Fix to load test_sysctl module
lib: Make test_sysctl initialized as module
lib: Make prime number generator independently selectable
selftests/ftrace: Return unsupported if no error_log file
selftests/ftrace: Use printf for backslash included command
selftests/timens: handle a case when alarm clocks are not supported
Kernel selftests: Add check if TPM devices are supported
selftests: vdso: Add a selftest for vDSO getcpu()
selftests: vdso: Use a header file to prototype parse_vdso API
selftests: vdso: Rename vdso_test to vdso_test_gettimeofday
selftests/exec: Verify execve of non-regular files fail
selftests: introduce gen_tar Makefile target
Rationale:
Reduces attack surface on kernel devs opening the links for MITM
as HTTPS traffic is much harder to manipulate.
Deterministic algorithm:
For each file:
For each line:
If doesn't contain `\bxmlns\b`:
For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`:
If both the HTTP and HTTPS versions
return 200 OK and serve the same content:
Replace HTTP with HTTPS.
Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de>
Link: https://lore.kernel.org/r/20200526060544.25127-1-grandmaster@al2klimov.de
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Underline lengths should match the lengths of headings to avoid build
warnings with Sphinx.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Acked-by: Julia Lawall <julia.lawall@inria.fr>
Link: https://lore.kernel.org/r/20200605030405.6479-1-xypron.glpk@gmx.de
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
This change extends kcov remote coverage support to allow collecting
coverage from soft interrupts in addition to kernel background threads.
To collect coverage from code that is executed in softirq context, a part
of that code has to be annotated with kcov_remote_start/stop() in a
similar way as how it is done for global kernel background threads. Then
the handle used for the annotations has to be passed to the
KCOV_REMOTE_ENABLE ioctl.
Internally this patch adjusts the __sanitizer_cov_trace_pc() compiler
inserted callback to not bail out when called from softirq context.
kcov_remote_start/stop() are updated to save/restore the current per task
kcov state in a per-cpu area (in case the softirq came when the kernel was
already collecting coverage in task context). Coverage from softirqs is
collected into pre-allocated per-cpu areas, whose size is controlled by
the new CONFIG_KCOV_IRQ_AREA_SIZE.
[andreyknvl@google.com: turn current->kcov_softirq into unsigned int to fix objtool warning]
Link: http://lkml.kernel.org/r/841c778aa3849c5cb8c3761f56b87ce653a88671.1585233617.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Dmitry Vyukov <dvyukov@google.com>
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Konovalov <andreyknvl@gmail.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Marco Elver <elver@google.com>
Link: http://lkml.kernel.org/r/469bd385c431d050bc38a593296eff4baae50666.1584655448.git.andreyknvl@google.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull networking updates from David Miller:
1) Allow setting bluetooth L2CAP modes via socket option, from Luiz
Augusto von Dentz.
2) Add GSO partial support to igc, from Sasha Neftin.
3) Several cleanups and improvements to r8169 from Heiner Kallweit.
4) Add IF_OPER_TESTING link state and use it when ethtool triggers a
device self-test. From Andrew Lunn.
5) Start moving away from custom driver versions, use the globally
defined kernel version instead, from Leon Romanovsky.
6) Support GRO vis gro_cells in DSA layer, from Alexander Lobakin.
7) Allow hard IRQ deferral during NAPI, from Eric Dumazet.
8) Add sriov and vf support to hinic, from Luo bin.
9) Support Media Redundancy Protocol (MRP) in the bridging code, from
Horatiu Vultur.
10) Support netmap in the nft_nat code, from Pablo Neira Ayuso.
11) Allow UDPv6 encapsulation of ESP in the ipsec code, from Sabrina
Dubroca. Also add ipv6 support for espintcp.
12) Lots of ReST conversions of the networking documentation, from Mauro
Carvalho Chehab.
13) Support configuration of ethtool rxnfc flows in bcmgenet driver,
from Doug Berger.
14) Allow to dump cgroup id and filter by it in inet_diag code, from
Dmitry Yakunin.
15) Add infrastructure to export netlink attribute policies to
userspace, from Johannes Berg.
16) Several optimizations to sch_fq scheduler, from Eric Dumazet.
17) Fallback to the default qdisc if qdisc init fails because otherwise
a packet scheduler init failure will make a device inoperative. From
Jesper Dangaard Brouer.
18) Several RISCV bpf jit optimizations, from Luke Nelson.
19) Correct the return type of the ->ndo_start_xmit() method in several
drivers, it's netdev_tx_t but many drivers were using
'int'. From Yunjian Wang.
20) Add an ethtool interface for PHY master/slave config, from Oleksij
Rempel.
21) Add BPF iterators, from Yonghang Song.
22) Add cable test infrastructure, including ethool interfaces, from
Andrew Lunn. Marvell PHY driver is the first to support this
facility.
23) Remove zero-length arrays all over, from Gustavo A. R. Silva.
24) Calculate and maintain an explicit frame size in XDP, from Jesper
Dangaard Brouer.
25) Add CAP_BPF, from Alexei Starovoitov.
26) Support terse dumps in the packet scheduler, from Vlad Buslov.
27) Support XDP_TX bulking in dpaa2 driver, from Ioana Ciornei.
28) Add devm_register_netdev(), from Bartosz Golaszewski.
29) Minimize qdisc resets, from Cong Wang.
30) Get rid of kernel_getsockopt and kernel_setsockopt in order to
eliminate set_fs/get_fs calls. From Christoph Hellwig.
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2517 commits)
selftests: net: ip_defrag: ignore EPERM
net_failover: fixed rollback in net_failover_open()
Revert "tipc: Fix potential tipc_aead refcnt leak in tipc_crypto_rcv"
Revert "tipc: Fix potential tipc_node refcnt leak in tipc_rcv"
vmxnet3: allow rx flow hash ops only when rss is enabled
hinic: add set_channels ethtool_ops support
selftests/bpf: Add a default $(CXX) value
tools/bpf: Don't use $(COMPILE.c)
bpf, selftests: Use bpf_probe_read_kernel
s390/bpf: Use bcr 0,%0 as tail call nop filler
s390/bpf: Maintain 8-byte stack alignment
selftests/bpf: Fix verifier test
selftests/bpf: Fix sample_cnt shared between two threads
bpf, selftests: Adapt cls_redirect to call csum_level helper
bpf: Add csum_level helper for fixing up csum levels
bpf: Fix up bpf_skb_adjust_room helper's skb csum setting
sfc: add missing annotation for efx_ef10_try_update_nic_stats_vf()
crypto/chtls: IPv6 support for inline TLS
Crypto/chcr: Fixes a coccinile check error
Crypto/chcr: Fixes compilations warnings
...
The recent patch ("kgdboc: Add kgdboc_earlycon to support early kgdb
using boot consoles") adds a new kernel command line parameter.
Document it.
Note that the patch adding the feature does some comparing/contrasting
of "kgdboc_earlycon" vs. the existing "ekgdboc". See that patch for
more details, but briefly "ekgdboc" can be used _instead_ of "kgdboc"
and just makes "kgdboc" do its normal initialization early (only works
if your tty driver is already ready). The new "kgdboc_earlycon" works
in combination with "kgdboc" and is backed by boot consoles.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Link: https://lore.kernel.org/r/20200507130644.v4.9.I7d5eb42c6180c831d47aef1af44d0b8be3fac559@changeid
Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
Fix warnings at 'make htmldocs', and formatting issues in the resulting
documentation.
- test.h: Fix annotation in kernel-doc parameter description.
- Documentation/*.rst: Fixing formatting issues, and a duplicate label
issue due to usage of sphinx.ext.autosectionlabel and identical labels
within one document (sphinx warning)
Signed-off-by: Lothar Rubusch <l.rubusch@gmail.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
The gen_kselftest_tar.sh always packages *all* selftests and doesn't
pass along any variables to `make install` to influence what should be
built. This can result in an early error on the command line ("Unknown
tarball format TARGETS=XXX"), or unexpected test failures as the
tarball contains tests people wanted to skip on purpose.
Since the makefile already contains all the logic, we can add a target
for packaging. Keep the default .gz target the script uses, and actually
extend the supported formats by using tar's autodetection.
To not break current workflows, keep the gen_kselftest_tar.sh script as
it is, with an added suggestion to use the makefile target instead.
Signed-off-by: Veronika Kabatova <vkabatov@redhat.com>
Reviewed-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Allow users to build parameterized variants of fixtures.
If fixtures want variants, they call FIXTURE_VARIANT() to declare
the structure to fill for each variant. Each fixture will be re-run
for each of the variants defined by calling FIXTURE_VARIANT_ADD()
with the differing parameters initializing the structure.
Since tests are being re-run, additional initialization (steps,
no_print) is also added.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Acked-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Introduce ASSERT_EXCLUSIVE_*_SCOPED(), which provide an intuitive
interface to use the scoped-access feature, without having to explicitly
mark the start and end of the desired scope. Basing duration of the
checks on scope avoids accidental misuse and resulting false positives,
which may be hard to debug. See added comments for usage.
The macros are implemented using __attribute__((__cleanup__(func))),
which is supported by all compilers that currently support KCSAN.
Suggested-by: Boqun Feng <boqun.feng@gmail.com>
Suggested-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Marco Elver <elver@google.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAl6TbaUeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGhgkH/iWpiKvosA20HJjC
rBqYeJPxQsgZTuBieWJ+MeVxbpcF7RlM4c+glyvg3QJhHwIEG58dl6LBrQbAyBAR
aFHNojr1iAYOruVCGnU3pA008YZiwUIDv/ZQ4DF8fmIU2vI2mJ6qHBv3XDl4G2uR
Nwz8Eu9AgIwZM5coomVOSmoWyFy7Vxmb7W+3t5VmKsvOWx4ib9kyQtOIkvQDEl7j
XCbWfI0xDQr6LFOm4jnCi5R/LhJ2LIqqIvHHrunbpszM8IwK797jCXz4im+dmd5Y
+km46N7a8pDqri36xXz1gdBAU3eG7Pt1NyvfjwRVTdX4GquQ2MT0GoojxbLxUP3y
3pEsQuE=
=whbL
-----END PGP SIGNATURE-----
Merge tag 'v5.7-rc1' into locking/kcsan, to resolve conflicts and refresh
Resolve these conflicts:
arch/x86/Kconfig
arch/x86/kernel/Makefile
Do a minor "evil merge" to move the KCSAN entry up a bit by a few lines
in the Kconfig to reduce the probability of future conflicts.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
This kunit update for Linux-5.7-rc1 consists of:
- debugfs support for displaying kunit test suite results; this is
especially useful for module-loaded tests to allow disentangling of
test result display from other dmesg events. CONFIG_KUNIT_DEBUGFS
enables/disables the debugfs support.
- Several fixes and improvements to kunit framework and tool.
-----BEGIN PGP SIGNATURE-----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=5w9O
-----END PGP SIGNATURE-----
Merge tag 'linux-kselftest-kunit-5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull kunit updates from Shuah Khan:
"This kunit update consists of:
- debugfs support for displaying kunit test suite results.
This is especially useful for module-loaded tests to allow
disentangling of test result display from other dmesg events.
CONFIG_KUNIT_DEBUGFS enables/disables the debugfs support.
- Several fixes and improvements to kunit framework and tool"
* tag 'linux-kselftest-kunit-5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
kunit: tool: add missing test data file content
kunit: update documentation to describe debugfs representation
kunit: subtests should be indented 4 spaces according to TAP
kunit: add log test
kunit: add debugfs /sys/kernel/debug/kunit/<suite>/results display
Documentation: kunit: Make the KUnit documentation less UML-specific
Fix linked-list KUnit test when run multiple times
kunit: kunit_tool: Allow .kunitconfig to disable config items
kunit: Always print actual pointer values in asserts
kunit: add --make_options
kunit: Run all KUnit tests through allyesconfig
kunit: kunit_parser: make parser more robust
- Lots of RST conversion work by Mauro, Daniel ALmeida, and others.
Maybe someday we'll get to the end of this stuff...maybe...
- Some organizational work to bring some order to the core-api manual.
- Various new docs and additions to the existing documentation.
- Typo fixes, warning fixes, ...
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEIw+MvkEiF49krdp9F0NaE2wMflgFAl6BLf4PHGNvcmJldEBs
d24ubmV0AAoJEBdDWhNsDH5YLhkIAIhcg6gxp0oZZ3KDfQyhvej0EWQGVDNkmloQ
O1VOSV3RJsZL9HwN9xSNnNfN5+hw5RUYVbn1s201uj6kovZY9qcTpHP2LCizUeGb
eFkSTmzkyAuAbJjuVLgMPDerJPEew0HnudiToeSpQeoIL1WB6YGd4/5H/cN1KLex
8ggjllcY0wOgbiFffmK6+tavDv7vT0lKTdwKRYh2nxu7zrPVVd1ZnW+RtntdTVQt
i+xwV6/YdWtg5C53IwBPpeyubX40vqaIjU8rzpLq5SCVbsZN14sSR709m1AYCOK0
i4VDWEhfA2XBi6Nycl5U0czuGziwoHrTgSCkS1mmSDujnpgfKM8=
=6YOS
-----END PGP SIGNATURE-----
Merge tag 'docs-5.7' of git://git.lwn.net/linux
Pull documentation updates from Jonathan Corbet:
"This has been a busy cycle for documentation work.
Highlights include:
- Lots of RST conversion work by Mauro, Daniel ALmeida, and others.
Maybe someday we'll get to the end of this stuff...maybe...
- Some organizational work to bring some order to the core-api
manual.
- Various new docs and additions to the existing documentation.
- Typo fixes, warning fixes, ..."
* tag 'docs-5.7' of git://git.lwn.net/linux: (123 commits)
Documentation: x86: exception-tables: document CONFIG_BUILDTIME_TABLE_SORT
MAINTAINERS: adjust to filesystem doc ReST conversion
docs: deprecated.rst: Add BUG()-family
doc: zh_CN: add translation for virtiofs
doc: zh_CN: index files in filesystems subdirectory
docs: locking: Drop :c:func: throughout
docs: locking: Add 'need' to hardirq section
docs: conf.py: avoid thousands of duplicate label warning on Sphinx
docs: prevent warnings due to autosectionlabel
docs: fix reference to core-api/namespaces.rst
docs: fix pointers to io-mapping.rst and io_ordering.rst files
Documentation: Better document the softlockup_panic sysctl
docs: hw-vuln: tsx_async_abort.rst: get rid of an unused ref
docs: perf: imx-ddr.rst: get rid of a warning
docs: filesystems: fuse.rst: supress a Sphinx warning
docs: translations: it: avoid duplicate refs at programming-language.rst
docs: driver.rst: supress two ReSt warnings
docs: trace: events.rst: convert some new stuff to ReST format
Documentation: Add io_ordering.rst to driver-api manual
Documentation: Add io-mapping.rst to driver-api manual
...
Remove some of the outmoded "Why KUnit" rationale, and move some
UML-specific information to the kunit_tool page. Also update the Getting
Started guide to mention running tests without the kunit_tool wrapper.
Signed-off-by: David Gow <davidgow@google.com>
Reviewed-by: Frank Rowand <frank.rowand@sony.com>
Acked-by: Shuah Khan <skhan@linuxfoundation.org>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Extend and improve based on recent changes, and summarize important
bits that have been missing. Tested with "make htmldocs".
Signed-off-by: Marco Elver <elver@google.com>
Cc: Qian Cai <cai@lca.pw>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
* Don't list powerpc twice (once as ppc)
* Drop tile, which has been removed from the source tree
* Mention arm64, nds32, arc, and xtensa
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Link: https://lore.kernel.org/r/20200303194215.23756-1-j.neuschaefer@gmx.net
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Fix a missing newline in a code block that was causing a warning:
Documentation/dev-tools/kunit/usage.rst:553: WARNING: Error in "code-block" directive:
maximum 1 argument(s) allowed, 3 supplied.
.. code-block:: bash
modprobe example-test
Signed-off-by: Brendan Higgins <brendanhiggins@google.com>
Reviewed-by: Alan Maguire <alan.maguire@oracle.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
This tag contains a handful of patches that I'd like to target for this merge
window:
* Support for kasan.
* 32-bit physical addresses on rv32i-based systems.
* Support for CONFIG_DEBUG_VIRTUAL
* DT entry for the FU540 GPIO controller, which has recently had a device
driver merged.
These boot a buildroot-based system on QEMU's virt board for me.
-----BEGIN PGP SIGNATURE-----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=W7f7
-----END PGP SIGNATURE-----
Merge tag 'riscv-for-linus-5.6-mw0' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V updates from Palmer Dabbelt:
"This contains a handful of patches for this merge window:
- Support for kasan
- 32-bit physical addresses on rv32i-based systems
- Support for CONFIG_DEBUG_VIRTUAL
- DT entry for the FU540 GPIO controller, which has recently had a
device driver merged
These boot a buildroot-based system on QEMU's virt board for me"
* tag 'riscv-for-linus-5.6-mw0' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
riscv: dts: Add DT support for SiFive FU540 GPIO driver
riscv: mm: add support for CONFIG_DEBUG_VIRTUAL
riscv: keep 32-bit kernel to 32-bit phys_addr_t
kasan: Add riscv to KASAN documentation.
riscv: Add KASAN support
kasan: No KASAN's memmove check if archs don't have it.
Add riscv to the KASAN documentation to mention that riscv
is supporting generic kasan now.
Signed-off-by: Nick Hu <nickhu@andestech.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
Documentation should describe how to build kunit and tests as
modules.
Co-developed-by: Knut Omang <knut.omang@oracle.com>
Signed-off-by: Knut Omang <knut.omang@oracle.com>
Signed-off-by: Alan Maguire <alan.maguire@oracle.com>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Updates the section on "Selective analysis", listing all available
options to blacklist reporting data races for: specific accesses,
functions, compilation units, and entire directories.
These options should provide adequate control for maintainers to opt out
of KCSAN analysis at varying levels of granularity. It is hoped to
provide the required control to reflect preferences for handling data
races across the kernel.
Signed-off-by: Marco Elver <elver@google.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Make the layout of kcov_remote_arg the same for 32-bit and 64-bit code.
This makes it more convenient to write userspace apps that can be
compiled into 32-bit or 64-bit binaries and still work with the same
64-bit kernel.
Also use proper __u32 types in uapi headers instead of unsigned ints.
Link: http://lkml.kernel.org/r/9e91020876029cfefc9211ff747685eba9536426.1575638983.git.andreyknvl@google.com
Fixes: eec028c938 ("kcov: remote coverage support")
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Acked-by: Marco Elver <elver@google.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: Felipe Balbi <balbi@kernel.org>
Cc: Chunfeng Yun <chunfeng.yun@mediatek.com>
Cc: "Jacky . Cao @ sony . com" <Jacky.Cao@sony.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Marco Elver <elver@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This commit renames 'kunitconfig' to '.kunitconfig' so that it can be
automatically ignored by git and do not disturb people who want to type
'kernel/' by pressing only the 'k' and then 'tab' key.
Signed-off-by: SeongJae Park <sjpark@amazon.de>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Tested-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
The kunit doc suggests users to get the default `kunitconfig` from an
external git tree. However, the file is already located under the
`arch/um/configs/` of the kernel tree. Because the local file is easier
to access and maintain, this commit updates the doc to use it.
Signed-off-by: SeongJae Park <sjpark@amazon.de>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Tested-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Commit c78fd76f2b ("selftests: Move kselftest_module.sh into
kselftest/") moved kselftest_module.sh but missed updating a few
references to the path in documentation.
Fixes: c78fd76f2b ("selftests: Move kselftest_module.sh into kselftest/")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Acked-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Add documentation for the Python script used to build, run, and collect
results from the kernel known as kunit_tool. kunit_tool
(tools/testing/kunit/kunit.py) was already added in previous commits.
Signed-off-by: Brendan Higgins <brendanhiggins@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Fix typos and gramatical errors in the Getting Started and Usage guide
for KUnit.
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://patchwork.kernel.org/patch/11156481/
Reported-by: Rinat Ibragimov <ibragimovrinat@mail.ru>
Link: https://github.com/google/kunit-docs/issues/1
Signed-off-by: Brendan Higgins <brendanhiggins@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Patch series " kcov: collect coverage from usb and vhost", v3.
This patchset extends kcov to allow collecting coverage from backgound
kernel threads. This extension requires custom annotations for each of
the places where coverage collection is desired. This patchset
implements this for hub events in the USB subsystem and for vhost
workers. See the first patch description for details about the kcov
extension. The other two patches apply this kcov extension to USB and
vhost.
Examples of other subsystems that might potentially benefit from this
when custom annotations are added (the list is based on
process_one_work() callers for bugs recently reported by syzbot):
1. fs: writeback wb_workfn() worker,
2. net: addrconf_dad_work()/addrconf_verify_work() workers,
3. net: neigh_periodic_work() worker,
4. net/p9: p9_write_work()/p9_read_work() workers,
5. block: blk_mq_run_work_fn() worker.
These patches have been used to enable coverage-guided USB fuzzing with
syzkaller for the last few years, see the details here:
https://github.com/google/syzkaller/blob/master/docs/linux/external_fuzzing_usb.md
This patchset has been pushed to the public Linux kernel Gerrit
instance:
https://linux-review.googlesource.com/c/linux/kernel/git/torvalds/linux/+/1524
This patch (of 3):
Add background thread coverage collection ability to kcov.
With KCOV_ENABLE coverage is collected only for syscalls that are issued
from the current process. With KCOV_REMOTE_ENABLE it's possible to
collect coverage for arbitrary parts of the kernel code, provided that
those parts are annotated with kcov_remote_start()/kcov_remote_stop().
This allows to collect coverage from two types of kernel background
threads: the global ones, that are spawned during kernel boot in a
limited number of instances (e.g. one USB hub_event() worker thread is
spawned per USB HCD); and the local ones, that are spawned when a user
interacts with some kernel interface (e.g. vhost workers).
To enable collecting coverage from a global background thread, a unique
global handle must be assigned and passed to the corresponding
kcov_remote_start() call. Then a userspace process can pass a list of
such handles to the KCOV_REMOTE_ENABLE ioctl in the handles array field
of the kcov_remote_arg struct. This will attach the used kcov device to
the code sections, that are referenced by those handles.
Since there might be many local background threads spawned from
different userspace processes, we can't use a single global handle per
annotation. Instead, the userspace process passes a non-zero handle
through the common_handle field of the kcov_remote_arg struct. This
common handle gets saved to the kcov_handle field in the current
task_struct and needs to be passed to the newly spawned threads via
custom annotations. Those threads should in turn be annotated with
kcov_remote_start()/kcov_remote_stop().
Internally kcov stores handles as u64 integers. The top byte of a
handle is used to denote the id of a subsystem that this handle belongs
to, and the lower 4 bytes are used to denote the id of a thread instance
within that subsystem. A reserved value 0 is used as a subsystem id for
common handles as they don't belong to a particular subsystem. The
bytes 4-7 are currently reserved and must be zero. In the future the
number of bytes used for the subsystem or handle ids might be increased.
When a particular userspace process collects coverage by via a common
handle, kcov will collect coverage for each code section that is
annotated to use the common handle obtained as kcov_handle from the
current task_struct. However non common handles allow to collect
coverage selectively from different subsystems.
Link: http://lkml.kernel.org/r/e90e315426a384207edbec1d6aa89e43008e4caf.1572366574.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: David Windsor <dwindsor@gmail.com>
Cc: Elena Reshetova <elena.reshetova@intel.com>
Cc: Anders Roxell <anders.roxell@linaro.org>
Cc: Alexander Potapenko <glider@google.com>
Cc: Marco Elver <elver@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
- Various kerneldoc script enhancements.
- More RST conversions; those are slowing down as we run out of things to
convert, but we're a ways from done still.
- Dan's "maintainer profile entry" work landed at last. Now we just need
to get maintainers to fill in the profiles...
- A reworking of the parallel build setup to work better with a variety of
systems (and to not take over huge systems entirely in particular).
- The MAINTAINERS file is now converted to RST during the build.
Hopefully nobody ever tries to print this thing, or they will need to
load a lot of paper.
- A script and documentation making it easy for maintainers to add Link:
tags at commit time.
Also included is the removal of a bunch of spurious CR characters.
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEIw+MvkEiF49krdp9F0NaE2wMflgFAl3j5B0PHGNvcmJldEBs
d24ubmV0AAoJEBdDWhNsDH5YtBcH/jIN2cO8/0YW2rjVT+1G6ytSdFUKx5WJ/lpf
5uBeCvuCeYhtCB6+BgnXvjykJ7jDW11/NJNjWqz/gsvD5l5FJK1rXarI/oz2Klyi
kcPtDmBF/ki4wz9qXzEpa0vg8LXdjeys50S1vE75qCzxZoPP7YjuRbPnLrlIJukv
JbDVi4p9kxgeHfRB4+BHOe5rFwA3mMmaxKNIX34Y+UUO2KZ0g/yUi1bAaQwQAdt+
PsORmkVQ8Puh3K9xRIr7dYlcWBlBiPqzYdvDgTVxSjrxdK6wjYjSgVk2VjC5MBUN
mTSTWgyfsIcD/76/s8tq7ZRl2fw+SkCSkFo79Rb/hJwDTb7Vnng=
=LPBr
-----END PGP SIGNATURE-----
Merge tag 'docs-5.5a' of git://git.lwn.net/linux
Pull Documentation updates from Jonathan Corbet:
"Here are the main documentation changes for 5.5:
- Various kerneldoc script enhancements.
- More RST conversions; those are slowing down as we run out of
things to convert, but we're a ways from done still.
- Dan's "maintainer profile entry" work landed at last. Now we just
need to get maintainers to fill in the profiles...
- A reworking of the parallel build setup to work better with a
variety of systems (and to not take over huge systems entirely in
particular).
- The MAINTAINERS file is now converted to RST during the build.
Hopefully nobody ever tries to print this thing, or they will need
to load a lot of paper.
- A script and documentation making it easy for maintainers to add
Link: tags at commit time.
Also included is the removal of a bunch of spurious CR characters"
* tag 'docs-5.5a' of git://git.lwn.net/linux: (91 commits)
docs: remove a bunch of stray CRs
docs: fix up the maintainer profile document
libnvdimm, MAINTAINERS: Maintainer Entry Profile
Maintainer Handbook: Maintainer Entry Profile
MAINTAINERS: Reclaim the P: tag for Maintainer Entry Profile
docs, parallelism: Rearrange how jobserver reservations are made
docs, parallelism: Do not leak blocking mode to other readers
docs, parallelism: Fix failure path and add comment
Documentation: Remove bootmem_debug from kernel-parameters.txt
Documentation: security: core.rst: fix warnings
Documentation/process/howto/kokr: Update for 4.x -> 5.x versioning
Documentation/translation: Use Korean for Korean translation title
docs/memory-barriers.txt: Remove remaining references to mmiowb()
docs/memory-barriers.txt/kokr: Update I/O section to be clearer about CPU vs thread
docs/memory-barriers.txt/kokr: Fix style, spacing and grammar in I/O section
Documentation/kokr: Kill all references to mmiowb()
docs/memory-barriers.txt/kokr: Rewrite "KERNEL I/O BARRIER EFFECTS" section
docs: Add initial documentation for devfreq
Documentation: Document how to get links with git am
docs: Add request_irq() documentation
...
Patch series "kasan: support backing vmalloc space with real shadow
memory", v11.
Currently, vmalloc space is backed by the early shadow page. This means
that kasan is incompatible with VMAP_STACK.
This series provides a mechanism to back vmalloc space with real,
dynamically allocated memory. I have only wired up x86, because that's
the only currently supported arch I can work with easily, but it's very
easy to wire up other architectures, and it appears that there is some
work-in-progress code to do this on arm64 and s390.
This has been discussed before in the context of VMAP_STACK:
- https://bugzilla.kernel.org/show_bug.cgi?id=202009
- https://lkml.org/lkml/2018/7/22/198
- https://lkml.org/lkml/2019/7/19/822
In terms of implementation details:
Most mappings in vmalloc space are small, requiring less than a full
page of shadow space. Allocating a full shadow page per mapping would
therefore be wasteful. Furthermore, to ensure that different mappings
use different shadow pages, mappings would have to be aligned to
KASAN_SHADOW_SCALE_SIZE * PAGE_SIZE.
Instead, share backing space across multiple mappings. Allocate a
backing page when a mapping in vmalloc space uses a particular page of
the shadow region. This page can be shared by other vmalloc mappings
later on.
We hook in to the vmap infrastructure to lazily clean up unused shadow
memory.
Testing with test_vmalloc.sh on an x86 VM with 2 vCPUs shows that:
- Turning on KASAN, inline instrumentation, without vmalloc, introuduces
a 4.1x-4.2x slowdown in vmalloc operations.
- Turning this on introduces the following slowdowns over KASAN:
* ~1.76x slower single-threaded (test_vmalloc.sh performance)
* ~2.18x slower when both cpus are performing operations
simultaneously (test_vmalloc.sh sequential_test_order=1)
This is unfortunate but given that this is a debug feature only, not the
end of the world. The benchmarks are also a stress-test for the vmalloc
subsystem: they're not indicative of an overall 2x slowdown!
This patch (of 4):
Hook into vmalloc and vmap, and dynamically allocate real shadow memory
to back the mappings.
Most mappings in vmalloc space are small, requiring less than a full
page of shadow space. Allocating a full shadow page per mapping would
therefore be wasteful. Furthermore, to ensure that different mappings
use different shadow pages, mappings would have to be aligned to
KASAN_SHADOW_SCALE_SIZE * PAGE_SIZE.
Instead, share backing space across multiple mappings. Allocate a
backing page when a mapping in vmalloc space uses a particular page of
the shadow region. This page can be shared by other vmalloc mappings
later on.
We hook in to the vmap infrastructure to lazily clean up unused shadow
memory.
To avoid the difficulties around swapping mappings around, this code
expects that the part of the shadow region that covers the vmalloc space
will not be covered by the early shadow page, but will be left unmapped.
This will require changes in arch-specific code.
This allows KASAN with VMAP_STACK, and may be helpful for architectures
that do not have a separate module space (e.g. powerpc64, which I am
currently working on). It also allows relaxing the module alignment
back to PAGE_SIZE.
Testing with test_vmalloc.sh on an x86 VM with 2 vCPUs shows that:
- Turning on KASAN, inline instrumentation, without vmalloc, introuduces
a 4.1x-4.2x slowdown in vmalloc operations.
- Turning this on introduces the following slowdowns over KASAN:
* ~1.76x slower single-threaded (test_vmalloc.sh performance)
* ~2.18x slower when both cpus are performing operations
simultaneously (test_vmalloc.sh sequential_test_order=3D1)
This is unfortunate but given that this is a debug feature only, not the
end of the world.
The full benchmark results are:
Performance
No KASAN KASAN original x baseline KASAN vmalloc x baseline x KASAN
fix_size_alloc_test 662004 11404956 17.23 19144610 28.92 1.68
full_fit_alloc_test 710950 12029752 16.92 13184651 18.55 1.10
long_busy_list_alloc_test 9431875 43990172 4.66 82970178 8.80 1.89
random_size_alloc_test 5033626 23061762 4.58 47158834 9.37 2.04
fix_align_alloc_test 1252514 15276910 12.20 31266116 24.96 2.05
random_size_align_alloc_te 1648501 14578321 8.84 25560052 15.51 1.75
align_shift_alloc_test 147 830 5.65 5692 38.72 6.86
pcpu_alloc_test 80732 125520 1.55 140864 1.74 1.12
Total Cycles 119240774314 763211341128 6.40 1390338696894 11.66 1.82
Sequential, 2 cpus
No KASAN KASAN original x baseline KASAN vmalloc x baseline x KASAN
fix_size_alloc_test 1423150 14276550 10.03 27733022 19.49 1.94
full_fit_alloc_test 1754219 14722640 8.39 15030786 8.57 1.02
long_busy_list_alloc_test 11451858 52154973 4.55 107016027 9.34 2.05
random_size_alloc_test 5989020 26735276 4.46 68885923 11.50 2.58
fix_align_alloc_test 2050976 20166900 9.83 50491675 24.62 2.50
random_size_align_alloc_te 2858229 17971700 6.29 38730225 13.55 2.16
align_shift_alloc_test 405 6428 15.87 26253 64.82 4.08
pcpu_alloc_test 127183 151464 1.19 216263 1.70 1.43
Total Cycles 54181269392 308723699764 5.70 650772566394 12.01 2.11
fix_size_alloc_test 1420404 14289308 10.06 27790035 19.56 1.94
full_fit_alloc_test 1736145 14806234 8.53 15274301 8.80 1.03
long_busy_list_alloc_test 11404638 52270785 4.58 107550254 9.43 2.06
random_size_alloc_test 6017006 26650625 4.43 68696127 11.42 2.58
fix_align_alloc_test 2045504 20280985 9.91 50414862 24.65 2.49
random_size_align_alloc_te 2845338 17931018 6.30 38510276 13.53 2.15
align_shift_alloc_test 472 3760 7.97 9656 20.46 2.57
pcpu_alloc_test 118643 132732 1.12 146504 1.23 1.10
Total Cycles 54040011688 309102805492 5.72 651325675652 12.05 2.11
[dja@axtens.net: fixups]
Link: http://lkml.kernel.org/r/20191120052719.7201-1-dja@axtens.net
Link: https://bugzilla.kernel.org/show_bug.cgi?id=3D202009
Link: http://lkml.kernel.org/r/20191031093909.9228-2-dja@axtens.net
Signed-off-by: Mark Rutland <mark.rutland@arm.com> [shadow rework]
Signed-off-by: Daniel Axtens <dja@axtens.net>
Co-developed-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Vasily Gorbik <gor@linux.ibm.com>
Reviewed-by: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Christophe Leroy <christophe.leroy@c-s.fr>
Cc: Qian Cai <cai@lca.pw>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This kselftest update for Linux 5.5-rc1 adds KUnit, a lightweight unit
testing and mocking framework for the Linux kernel from Brendan Higgins.
KUnit is not an end-to-end testing framework. It is currently supported
on UML and sub-systems can write unit tests and run them in UML env.
KUnit documentation is included in this update.
In addition, this Kunit update adds 3 new kunit tests:
- kunit test for proc sysctl from Iurii Zaikin
- kunit test for the 'list' doubly linked list from David Gow
- ext4 kunit test for decoding extended timestamps from Iurii Zaikin
In the future KUnit will be linked to Kselftest framework to provide
a way to trigger KUnit tests from user-space.
-----BEGIN PGP SIGNATURE-----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=0zEe
-----END PGP SIGNATURE-----
Merge tag 'linux-kselftest-5.5-rc1-kunit' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull kselftest KUnit support gtom Shuah Khan:
"This adds KUnit, a lightweight unit testing and mocking framework for
the Linux kernel from Brendan Higgins.
KUnit is not an end-to-end testing framework. It is currently
supported on UML and sub-systems can write unit tests and run them in
UML env. KUnit documentation is included in this update.
In addition, this Kunit update adds 3 new kunit tests:
- proc sysctl test from Iurii Zaikin
- the 'list' doubly linked list test from David Gow
- ext4 tests for decoding extended timestamps from Iurii Zaikin
In the future KUnit will be linked to Kselftest framework to provide a
way to trigger KUnit tests from user-space"
* tag 'linux-kselftest-5.5-rc1-kunit' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: (23 commits)
lib/list-test: add a test for the 'list' doubly linked list
ext4: add kunit test for decoding extended timestamps
Documentation: kunit: Fix verification command
kunit: Fix '--build_dir' option
kunit: fix failure to build without printk
MAINTAINERS: add proc sysctl KUnit test to PROC SYSCTL section
kernel/sysctl-test: Add null pointer test for sysctl.c:proc_dointvec()
MAINTAINERS: add entry for KUnit the unit testing framework
Documentation: kunit: add documentation for KUnit
kunit: defconfig: add defconfigs for building KUnit tests
kunit: tool: add Python wrappers for running KUnit tests
kunit: test: add tests for KUnit managed resources
kunit: test: add the concept of assertions
kunit: test: add tests for kunit test abort
kunit: test: add support for test abort
objtool: add kunit_try_catch_throw to the noreturn list
kunit: test: add initial tests
lib: enable building KUnit in lib/
kunit: test: add the concept of expectations
kunit: test: add assertion printing library
...
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAl2su/AeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGvm4H/1jkheCrvB/GJS69
wd18vizAg+eFmNCzxlGVhpQTKGymNRy+g6clnoli3cNJ3pSVKcYgVyB3oXaONIhp
g/ANudnBjTdjqYgJzfLij5AGecrGwDpF3YL0kuKrCB63s2I/HwQGYy/aPrYY8emy
gAYdaf1DGRu5/DIIB6soTo/TnpKoAyTE+XY5MaPSug++t/Flov19tlU40IZxXW94
bjTXbm0yklrsIx+LL5mYYGGnygSTCF66JjFg1qhDCBQaS2MZ21h1ZgaOtGZTwZcc
WgEiqLC5S1Iyj96zir1t78RcVQ4RzgvDbhUOgIqUFsYAO2wOicvxyFE3Hj8rPOKd
uGgVPRM=
=xgZa
-----END PGP SIGNATURE-----
Merge tag 'v5.4-rc4' into docs-next
I need to pick up the independent changes made to
Documentation/core-api/memory-allocation.rst to be able to merge further
work without creating a total mess.
Commit 8974558f49 ("mm, page_owner, debug_pagealloc: save and dump
freeing stack trace") enhanced page_owner to also store freeing stack
trace, when debug_pagealloc is also enabled. KASAN would also like to
do this [1] to improve error reports to debug e.g. UAF issues.
Kirill has suggested that the freeing stack trace saving should be also
possible to be enabled separately from KASAN or debug_pagealloc, i.e.
with an extra boot option. Qian argued that we have enough options
already, and avoiding the extra overhead is not worth the complications
in the case of a debugging option. Kirill noted that the extra stack
handle in struct page_owner requires 0.1% of memory.
This patch therefore enables free stack saving whenever page_owner is
enabled, regardless of whether debug_pagealloc or KASAN is also enabled.
KASAN kernels booted with page_owner=on will thus benefit from the
improved error reports.
[1] https://bugzilla.kernel.org/show_bug.cgi?id=203967
[vbabka@suse.cz: v3]
Link: http://lkml.kernel.org/r/20191007091808.7096-3-vbabka@suse.cz
Link: http://lkml.kernel.org/r/20190930122916.14969-3-vbabka@suse.cz
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Qian Cai <cai@lca.pw>
Suggested-by: Dmitry Vyukov <dvyukov@google.com>
Suggested-by: Walter Wu <walter-zh.wu@mediatek.com>
Suggested-by: Andrey Ryabinin <aryabinin@virtuozzo.com>
Suggested-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Suggested-by: Qian Cai <cai@lca.pw>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
kunit wrapper script ('kunit.py') receives a sub-command (only 'run' for
now) as its argument. If no sub-command is given, it prints help
message and just quit. However, an example command in the kunit
documentation for a verification of kunit is missing the sub-command.
This commit fixes the example.
Signed-off-by: SeongJae Park <sj38.park@gmail.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Let the user specify an optional TARGETS skiplist through the new optional
SKIP_TARGETS Makefile variable.
It is easier to skip at will using a reduced and well defined list of
possibly problematic targets with SKIP_TARGETS than to provide a partially
stripped down list of good targets using the usual TARGETS variable.
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Commit c566586818 ("mm: kmemleak: use the memory pool for early
allocations") renamed CONFIG_DEBUG_KMEMLEAK_EARLY_LOG_SIZE to
CONFIG_DEBUG_KMEMLEAK_MEM_POOL_SIZE. Update the documentation reference
to reflect that.
Fixes: c566586818 ("mm: kmemleak: use the memory pool for early allocations")
Signed-off-by: Jeremy Cline <jcline@redhat.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Add documentation for KUnit, the Linux kernel unit testing framework.
- Add intro and usage guide for KUnit
- Add API reference
Signed-off-by: Felix Guo <felixguoxiuping@gmail.com>
Signed-off-by: Brendan Higgins <brendanhiggins@google.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Logan Gunthorpe <logang@deltatee.com>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
This fell into disrepair a while ago, and the majority of hits to the
snapshots were from bots, so it's more trouble to keep running than it's worth.
Signed-off-by: Dave Jones <davej@codemonkey.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Now that the latex_documents are handled automatically, we can
remove those extra conf.py files.
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Wikipedia now has a main article to "tracing garbage collector" topic.
Change the URL and use the reStructuredText syntax for hyperlinks and add
more details about the use of the tool. Add a section about how to use
the kmemleak-test module to test the memory leak scanning.
Link: http://lkml.kernel.org/r/20190612155231.19448-2-andrealmeid@collabora.com
Signed-off-by: André Almeida <andrealmeid@collabora.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
