This concludes a long journey towards replacing the old
board files with devictree description on the Cirrus Logic
EP93xx platform.
Nikita Shubin has been working on this for a long time,
for details see the last post on
https://lore.kernel.org/lkml/20240909-ep93xx-v12-0-e86ab2423d4b@maquefel.me/
-----BEGIN PGP SIGNATURE-----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=Y3Cd
-----END PGP SIGNATURE-----
Merge tag 'soc-ep93xx-dt-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC update from Arnd Bergmann:
"Convert ep93xx to devicetree
This concludes a long journey towards replacing the old board files
with devictree description on the Cirrus Logic EP93xx platform.
Nikita Shubin has been working on this for a long time, for details
see the last post on
https://lore.kernel.org/lkml/20240909-ep93xx-v12-0-e86ab2423d4b@maquefel.me/"
* tag 'soc-ep93xx-dt-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (47 commits)
dt-bindings: gpio: ep9301: Add missing "#interrupt-cells" to examples
MAINTAINERS: Update EP93XX ARM ARCHITECTURE maintainer
soc: ep93xx: drop reference to removed EP93XX_SOC_COMMON config
net: cirrus: use u8 for addr to calm down sparse
dmaengine: cirrus: use snprintf() to calm down gcc 13.3.0
dmaengine: ep93xx: Fix a NULL vs IS_ERR() check in probe()
pinctrl: ep93xx: Fix raster pins typo
spi: ep93xx: update kerneldoc comments for ep93xx_spi
clk: ep93xx: Fix off by one in ep93xx_div_recalc_rate()
clk: ep93xx: add module license
dmaengine: cirrus: remove platform code
ASoC: cirrus: edb93xx: Delete driver
ARM: ep93xx: soc: drop defines
ARM: ep93xx: delete all boardfiles
ata: pata_ep93xx: remove legacy pinctrl use
pwm: ep93xx: drop legacy pinctrl
ARM: ep93xx: DT for the Cirrus ep93xx SoC platforms
ARM: dts: ep93xx: Add EDB9302 DT
ARM: dts: ep93xx: add ts7250 board
ARM: dts: add Cirrus EP93XX SoC .dtsi
...
DT Bindings:
- Drop duplicate devices in trivial-devices.yaml
- Add a common serial peripheral device schema and reference it in
serial device schemas.
- Convert nxp,lpc1850-wdt, zii,rave-wdt, ti,davinci-wdt,
snps,archs-pct, fsl,bcsr, fsl,fpga-qixis-i2c, fsl,fpga-qixis,
fsl,cpm-enet, fsl,cpm-mdio, fsl,ucc-hdlc, maxim,ds26522,
aspeed,ast2400-cvic, aspeed,ast2400-vic, fsl,ftm-timer,
ti,davinci-timer, fsl,rcpm, and qcom,ebi2 to DT schema
- Add support for rockchip,rk3576-wdt, qcom,apss-wdt-sa8255p,
fsl,imx8qm-irqsteer, qcom,pm6150-vib, qcom,sa8255p-pdc, isil,isl69260,
ti,tps546d24, and lpc32xx DMA mux
- Drop duplicate nvidia,tegra186-ccplex-cluster.yaml and
mediatek,mt6795-sys-clock.yaml
- Add arm,gic ESPI and EPPI interrupt type specifiers
- Add another batch of legacy compatible strings which we have no
intention of documenting
- Add dmas/dma-names properties to FSL lcdif
- Fix wakeup-source reference to m8921-keypad.yaml
- Treewide fixes of typos in bindings
DT Core:
- Update dtc/libfdt to upstream version v1.7.0-95-gbcd02b523429
- More conversions to scoped iterators and __free() initializer
- Handle overflows in address resources on 32-bit systems
- Extend extracting compatible strings in sources from function
parameters
- Use of_property_present() in DT unittest
- Clean-up of_irq_to_resource() to use helpers
- Support #msi-cells=<0> in of_msi_get_domain()
- Improve the kerneldoc for of_property_match_string()
- kselftest: Ignore nodes that have ancestors disabled
-----BEGIN PGP SIGNATURE-----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=a3qP
-----END PGP SIGNATURE-----
Merge tag 'devicetree-for-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree updates from Rob Herring:
"DT Bindings:
- Drop duplicate devices in trivial-devices.yaml
- Add a common serial peripheral device schema and reference it in
serial device schemas.
- Convert nxp,lpc1850-wdt, zii,rave-wdt, ti,davinci-wdt,
snps,archs-pct, fsl,bcsr, fsl,fpga-qixis-i2c, fsl,fpga-qixis,
fsl,cpm-enet, fsl,cpm-mdio, fsl,ucc-hdlc, maxim,ds26522,
aspeed,ast2400-cvic, aspeed,ast2400-vic, fsl,ftm-timer,
ti,davinci-timer, fsl,rcpm, and qcom,ebi2 to DT schema
- Add support for rockchip,rk3576-wdt, qcom,apss-wdt-sa8255p,
fsl,imx8qm-irqsteer, qcom,pm6150-vib, qcom,sa8255p-pdc,
isil,isl69260, ti,tps546d24, and lpc32xx DMA mux
- Drop duplicate nvidia,tegra186-ccplex-cluster.yaml and
mediatek,mt6795-sys-clock.yaml
- Add arm,gic ESPI and EPPI interrupt type specifiers
- Add another batch of legacy compatible strings which we have no
intention of documenting
- Add dmas/dma-names properties to FSL lcdif
- Fix wakeup-source reference to m8921-keypad.yaml
- Treewide fixes of typos in bindings
DT Core:
- Update dtc/libfdt to upstream version v1.7.0-95-gbcd02b523429
- More conversions to scoped iterators and __free() initializer
- Handle overflows in address resources on 32-bit systems
- Extend extracting compatible strings in sources from function
parameters
- Use of_property_present() in DT unittest
- Clean-up of_irq_to_resource() to use helpers
- Support #msi-cells=<0> in of_msi_get_domain()
- Improve the kerneldoc for of_property_match_string()
- kselftest: Ignore nodes that have ancestors disabled"
* tag 'devicetree-for-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (59 commits)
dt-bindings: watchdog: Add rockchip,rk3576-wdt compatible
dt-bindings: cpu: Drop duplicate nvidia,tegra186-ccplex-cluster.yaml
dt-bindings: clock: mediatek: Drop duplicate mediatek,mt6795-sys-clock.yaml
of/irq: Use helper to define resources
of/irq: Make use of irq_get_trigger_type()
dt-bindings: clk: vc5: Make SD/OE pin configuration properties not required
drivers/of: Improve documentation for match_string
of: property: Do some clean up with use of __free()
dt-bindings: watchdog: qcom-wdt: document support on SA8255p
dt-bindings: interrupt-controller: fsl,irqsteer: Document fsl,imx8qm-irqsteer
dt-bindings: interrupt-controller: arm,gic: add ESPI and EPPI specifiers
dt-bindings: dma: Add lpc32xx DMA mux binding
dt-bindings: trivial-devices: Drop duplicate "maxim,max1237"
dt-bindings: trivial-devices: Drop duplicate LM75 compatible devices
dt-bindings: trivial-devices: Deprecate "ad,ad7414"
dt-bindings: trivial-devices: Drop incorrect and duplicate at24 compatibles
dt-bindings: wakeup-source: update reference to m8921-keypad.yaml
dt-bindings: interrupt-controller: qcom-pdc: document support for SA8255p
dt-bindings: Fix various typos
of: address: Unify resource bounds overflow checking
...
Corrected several typos in Documentation/devicetree/bindings files.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Kuan-Wei Chiu <visitorckw@gmail.com>
Reviewed-by: Matti Vaittinen <mazziesaccount@gmail.com>
Signed-off-by: Yu-Chun Lin <eleanor15x@gmail.com>
Link: https://lore.kernel.org/r/20240905151943.2792056-1-eleanor15x@gmail.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Update the spdifrx yaml file to reference the dai-common.yaml schema,
enabling the use of the 'sound-name-prefix' property
Signed-off-by: Andrei Simion <andrei.simion@microchip.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20240910082202.45972-1-andrei.simion@microchip.com
Signed-off-by: Mark Brown <broonie@kernel.org>
At least if rsnd is using DPCM connection on Audio-Graph-Card2,
fw_devlink might doesn't have enough information to break the cycle
(Same problem might occur with Multi-CPU/Codec or Codec2Codec).
In such case, rsnd driver will not be probed.
Add post-init-providers support to break the link cycle.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/87wmjkifob.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Heiko Stuebner <heiko@sntech.de>:
The Nanopc-T6 board does contain some devicetree errors, that came to
light with recent changes to the board.
Add soundcard bindings for the MT8365 SoC with the MT6357 audio codec.
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Alexandre Mergnat <amergnat@baylibre.com>
Link: https://patch.msgid.link/20240226-audio-i350-v7-2-6518d953a141@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add MT8365 audio front-end bindings
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Alexandre Mergnat <amergnat@baylibre.com>
Link: https://patch.msgid.link/20240226-audio-i350-v7-1-6518d953a141@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The codec can be used in conjunction with an audio-graph-card to provide
an endpoint for binding with the other side of the audio link.
Document the 'port' property that is used for this to prevent
dtbscheck errors like:
rockchip/rk3588-nanopc-t6-lts.dtb: codec@1b: Unevaluated properties are not allowed ('port' was unexpected)
from schema $id: http://devicetree.org/schemas/sound/realtek,rt5616.yaml#
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20240830203819.1972536-3-heiko@sntech.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Both devicetrees and driver implementation already use the specified mclk
in the field, so at least document the clock too, similarly to other
Realtek codec.
This has the nice additional effect of getting rid of dtbscheck warning.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20240830203819.1972536-2-heiko@sntech.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Neil Armstrong <neil.armstrong@linaro.org>:
Following an off-list discution with Jerome about fixing the following
DTBs check errors:
sound: Unevaluated properties are not allowed ('assigned-clock-parents', 'assigned-clock-rates', 'assigned-clocks' were unexpected)
from schema $id: http://devicetree.org/schemas/sound/amlogic,axg-sound-card.yaml#
sound: Unevaluated properties are not allowed ('assigned-clock-parents', 'assigned-clock-rates', 'assigned-clocks' were unexpected)
from schema $id: http://devicetree.org/schemas/sound/amlogic,gx-sound-card.yaml#
sound: 'anyOf' conditional failed, one must be fixed:
'clocks' is a required property
'#clock-cells' is a required property
from schema $id: http://devicetree.org/schemas/clock/clock.yaml#
It has been agreed documenting the clock in the sound card is a better solution
than moving them to a random clock controller or consumer node which is not
related to the actual meaning of those root frequencies.
The patchset adds the clocks proprty to the bindings and finally adds the
properties to the DT files.
Convert the Cirrus Logic CS4271 audio CODEC bindings to DT schema.
Add missing spi-cpha, spi-cpol, '#sound-dai-cells' and port, as they
are already being used in the DTS and the driver for this device.
Switch to 'reset-gpios' and drop legacy 'reset-gpio' used in original
bindings.
Based on Animesh Agarwal cs42xx8 conversion patch.
Cc: Alexander Sverdlin <alexander.sverdlin@gmail.com>
Link: https://lore.kernel.org/all/20240715-ep93xx-v11-0-4e924efda795@maquefel.me
Signed-off-by: Nikita Shubin <nikita.shubin@maquefel.me>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20240829-cs4271-yaml-v3-1-f1624cc838f6@maquefel.me
Signed-off-by: Mark Brown <broonie@kernel.org>
The 'fsl,imx28-saif' compatible has already the mxs-saif.txt description.
This patch converts (and removes it) this file to fsl,saif.yaml (to follow
current fsl convention).
Changes for the mxs-saif.txt:
- Adds 'clocks', '#clock-cells' and '#sound-dai-cells' properties
- Provide device description
Signed-off-by: Lukasz Majewski <lukma@denx.de>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20240828092709.2626359-1-lukma@denx.de
Signed-off-by: Mark Brown <broonie@kernel.org>
The sound card design is based on reference PLL frequencies that
are the root of all clock rates calculations.
Today, those frequencies are currently specified in DT via assigned-clocks,
because they correspond to the basic audio use-case.
It makes no sense to setup clock rates for a sound card without
referencing the clocks for the sound card, mainly because at
some point more complex audio use cases will be supported
and those root rates would need to change.
To solve this situation, let's legitimize the presence of assigned-clocks
in the sound card by documenting those clocks, as it describes a true
dependency of the sound card and paths the way of more complex
audio uses-cases involving those root frequencies.
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://patch.msgid.link/20240828-topic-amlogic-upstream-bindings-fixes-audio-snd-card-v2-2-58159abf0779@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The sound card design is based on reference PLL frequencies that
are the root of all clock rates calculations.
Today, those frequencies are currently specified in DT via assigned-clocks,
because they correspond to the basic audio use-case.
It makes no sense to setup clock rates for a sound card without
referencing the clocks for the sound card, mainly because at
some point more complex audio use cases will be supported
and those root rates would need to change.
To solve this situation, let's legitimize the presence of assigned-clocks
in the sound card by documenting those clocks, as it describes a true
dependency of the sound card and paths the way of more complex
audio uses-cases involving those root frequencies.
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://patch.msgid.link/20240828-topic-amlogic-upstream-bindings-fixes-audio-snd-card-v2-1-58159abf0779@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Convert binding doc tpa6130a2.txt to yaml format.
Additional change:
- add ref to dai-common.yaml
- add i2c node in example
Fix below warning:
arch/arm64/boot/dts/freescale/imx8mq-zii-ultra-rmb3.dtb: /soc@0/bus@30800000/i2c@30a20000/amp@60:
failed to match any schema with compatible: ['ti,tpa6130a2']
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20240820184604.499017-1-Frank.Li@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Clocks property was present only to allow usage of assigned-clocks in
the sound card node, however in upstream DTS the assigned-clocks were
moved in commit 4afb06afd7 ("ARM: dts: exynos: move assigned-clock*
properties to i2s0 node in Odroid XU4") to respective I2S nodes. Linux
drivers never parsed "clocks" so it can be safely dropped.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20240818173037.122152-1-krzysztof.kozlowski@linaro.org
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Reference common serial properties schema (for children of UART
controllers) to bring common definition of "current-speed" and
"max-speed" properties.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20240811-dt-bindings-serial-peripheral-props-v1-6-1dba258b7492@linaro.org
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Merge series from Cezary Rojewski <cezary.rojewski@intel.com>:
A spiritual successor to haswell/baytrail removal series [1].
The avs-driver found in sound/soc/intel/avs is a direct replacement to
the existing skylake-driver. It covers all features supported by it and
more and aligns with the recommended flows and requirements based on
Windows driver equivalent.
The skylake-driver related UAPI has been removed with "ASoC: Drop
soc-topology ABI v4 support" [2].
For the official kernel tree the deprecation begun with v6.0. Most
skylake-drivers users moved to avs- or SOF-driver when AudioDSP
capabilities are available on the platform or to snd-hda-intel
(sound/pci/hda) when such capabilities are not.
For the supported trees the deprecation begun with v5.4 with v5.15 being
the first where the skylake-driver is disabled entirely.
All machine board drivers that consume this DSP driver have their
replacements present within sound/soc/intel/avs/boards/ directory.
[1]: https://lore.kernel.org/alsa-devel/20201006064907.16277-1-cezary.rojewski@intel.com/
[2]: https://lore.kernel.org/alsa-devel/20240403091629.647267-1-cezary.rojewski@intel.com/
Convert binding doc tlv320aic31xx.txt to yaml format.
Additional change:
- add i2c node in example.
- replace MICBIAS_OFF with MICBIAS_2_0v in example because MICBIAS_OFF have
been defined in header file.
- add ref to dai-common.yaml.
- add #sound-dai-cells.
Fix below warning:
arch/arm64/boot/dts/freescale/imx8mq-zii-ultra-rmb3.dtb: /soc@0/bus@30800000/i2c@30a30000/codec@18:
failed to match any schema with compatible: ['ti,tlv320dac3100']
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20240814174422.4026100-1-Frank.Li@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
we seems to have ended up with duplicate clocks for frame-sync on sm8250,
it has both va and fsgen which are exactly same things. Remove the redundant
va clock and make it align with other SoCs.
Codec driver does not even handle va clock, so remove this from the
bindings and examples to avoid any confusion.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20240815165320.18836-1-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The reset GPIO of WCD9390/WCD9395 is active low and that's how it is
routed on typical boards, so correct the example DTS to use expected
polarity, instead of IRQ flag (which is a logical mistake on its own).
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20240806114931.40090-4-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The reset GPIO of WCD9380/WCD9385 is active low and that's how it is
routed on typical boards, so correct the example DTS to use expected
polarity.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20240806114931.40090-3-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The reset GPIO of WCD9340/WCD9341 is active low and that's how it is
routed on typical boards, so correct the example DTS to use expected
polarity.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20240806114931.40090-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The reset GPIO of WCD9370/WCD9375 is active low and that's how it is
routed on typical boards, so correct the example DTS to use expected
polarity.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20240806114931.40090-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Convert the Dialog Semiconductor DA7212/DA7213 Audio Codec Device Tree
binding documentation to json-schema.
Add missing properties.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/7645c9024a1762d281f4067504bc32a7a3d27caa.1721649741.git.geert+renesas@glider.be
Signed-off-by: Mark Brown <broonie@kernel.org>
The APQ8016 SBC and MSM8916 QDSP6 sound cards are a bit different from
others: they have additional IO muxing address space and pin control.
Move them to separate schema, so the original qcom,sm8250.yaml will be
easier to manage. New schema is going to grow for other platforms
having more of IO muxing address spaces.
Cc: Adam Skladowski <a39.skl@gmail.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20240723083300.35605-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Convert the Freescale i.MX audio complex with ES8328 codec bindings to
DT schema format.
Cc: Daniel Baluta <daniel.baluta@nxp.com>
Signed-off-by: Animesh Agarwal <animeshagarwal28@gmail.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20240722063657.23018-1-animeshagarwal28@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Convert the PCM512x and TAS575x audio CODECs/amplifiers bindings to DT
schema format. Add missing sound-dai-cells property.
Cc: Daniel Baluta <daniel.baluta@nxp.com>
Signed-off-by: Animesh Agarwal <animeshagarwal28@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20240717134729.51661-1-animeshagarwal28@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Convert the Cirrus Logic CS42448/CS42888 audio CODEC bindings to DT
schema format. Set power supply properties to required only for CS42888.
Cc: Daniel Baluta <daniel.baluta@nxp.com>
Signed-off-by: Animesh Agarwal <animeshagarwal28@gmail.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20240710072756.99765-1-animeshagarwal28@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Rayyan Ansari <rayyan.ansari@linaro.org>:
These patches convert the remaining plain text bindings for Qualcomm
sound drivers to dt schema, so device trees can be validated against
them.
Convert the Cirrus Logic CS4270 audio CODEC bindings to DT schema. Add
missing va-supply, vd-supply and vlc-supply properties, because they
are already being used in the DTS and the driver for this device.
Cc: Daniel Baluta <daniel.baluta@nxp.com>
Signed-off-by: Animesh Agarwal <animeshagarwal28@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240709184231.125207-1-animeshagarwal28@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Remove old txt bindings and add apq8096 soundcard entry to existing
dt schema.
Signed-off-by: Rayyan Ansari <rayyan.ansari@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240710113833.39859-4-rayyan.ansari@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Convert the Qualcomm MSM8916 WCD Digital Audio Codec bindings from text
to yaml dt schema format.
Make bindings complete by adding #sound-dai-cells.
Signed-off-by: Rayyan Ansari <rayyan.ansari@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240710113833.39859-2-rayyan.ansari@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The S/PDIF audio card support with compatible "fsl,imx-audio-spdif"
was merged from imx-spdif into the fsl-asoc-card driver.
It makes possible to use an S/PDIF with an ASRC.
This merge introduces new DT bindings to use with compatible
"fsl,imx-audio-spdif" to follow the way fsl-asoc-card works:
* the "spdif-controller" property from imx-spdif is named "audio-cpu"
in fsl-asoc-card.
* fsl-asoc-card uses codecs explicitly declared in DT
with "audio-codec".
With an SPDIF, codec drivers spdif_transmitter and
spdif_receiver should be used.
Driver imx-spdif used instead the dummy codec and a pair of
boolean properties, "spdif-in" and "spdif-out".
In an upcoming commit, in-tree DTs will be modified to follow these new
properties:
* Property "spdif-controller" will be renamed "audio-cpu".
* spdif_transmitter and spdif_receiver nodes will be declared
and linked to the fsl-asoc-card node with the property "audio-codec".
To keep backward compatibility with other DTs, support for
"spdif-controller", "spdif-in" and "spdif-out" properties is kept.
However, it is recommended to use the new properties if possible.
It is better to declare transmitter and/or receiver
in DT than using the dummy codec.
DTs using compatible "fsl,imx-audio-spdif" are still supported, and
fsl-asoc-card will behave the same as imx-spdif for these DTs.
Signed-off-by: Elinor Montmasson <elinor.montmasson@savoirfairelinux.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20240627083104.123357-6-elinor.montmasson@savoirfairelinux.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The QMC audio uses one QMC channel per DAI and uses this QMC channel to
transmit interleaved audio channel samples.
In order to work in non-interleave mode, a QMC audio DAI needs to use
multiple QMC channels. In that case, the DAI maps each QMC channel to
exactly one audio channel.
Allow QMC audio DAIs with multiple QMC channels attached.
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20240701113038.55144-10-herve.codina@bootlin.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Convert the RT5650/RT5645 audio CODEC bindings to DT schema.
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Animesh Agarwal <animeshagarwal28@gmail.com>
Cc: Daniel Baluta <daniel.baluta@nxp.com>
Link: https://patch.msgid.link/20240702120106.17100-1-animeshagarwal28@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Use master clock "mclk" if provided through device tree.
Signed-off-by: Maxim Kochetkov <fido_max@inbox.ru>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20240701211631.92384-2-fido_max@inbox.ru
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>:
simple-audio-mux is designed to be used generally, thus "Input 1" or
"Input 2" are used to selecting MUX input. This numbered inputs would work,
but might be not user friendly in some case, for example in case of system
hardware design has some clear labels.
Adds new "state-labels" property and enable to select MUX by own state names.
Original
> amixer set "MUX" "Input 1"
> amixer set "MUX" "Input 2"
Use mux-names
sound_mux: mux {
compatible = "simple-audio-mux";
mux-gpios = <...>;
=> state-labels = "Label_A", "Label_B";
};
> amixer set "MUX" "Label_A"
> amixer set "MUX" "Label_B"
Merge series from srinivas.kandagatla@linaro.org:
Existing way of allocating soundwire master ports on Qualcommm platforms is
dynamic, and in linear order starting from 1 to MAX_PORTS.
This will work as long as soundwire device ports are 1:1 mapped
linearly. However on most Qcom SoCs like SM8550, SM8650, x1e80100, these
are NOT mapped in that order.
The result of this is that only one speaker among the pair of speakers
is always silent, With recent changes for WSA codec to support codec
versions and along with these patches we are able to get all speakers
working on these SoCs.
Convert the RT5677 audio CODEC bindings to DT schema.
Signed-off-by: Animesh Agarwal <animeshagarwal28@gmail.com>
Cc: Daniel Baluta <daniel.baluta@nxp.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20240627105030.14360-1-animeshagarwal28@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Document port mapping property for wsa884x. Port mapping is required
to be able map correct master ports.
All the device ports are not mapped in same order as master ports, so
there is a need for having static port mapping for WSA codecs.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8650-HDK
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://patch.msgid.link/20240626-port-map-v2-3-6cc1c5608cdd@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Document port mapping property for wsa883x. Port mapping is required
to be able map correct master ports for VI feedback.
All the device ports are not mapped in same order as master ports, so
there is a need for having static port mapping for WSA codecs.
Signed-off-by: Manikantan R <quic_manrav@quicinc.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8650-HDK
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://patch.msgid.link/20240626-port-map-v2-1-6cc1c5608cdd@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
simple-audio-mux is designed to be used generally, thus "Input 1" or
"Input 2" are used to selecting MUX input. This numbered inputs would
work, but might be not user friendly in some case, for example in case
of system hardware design has some clear labels.
Adds new "state-labels" property and enable to select MUX by own state
names.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/87le2m7xp8.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Convert the RT5659/RT5658 audio CODEC bindings to DT schema.
Signed-off-by: Animesh Agarwal <animeshagarwal28@gmail.com>
Cc: Daniel Baluta <daniel.baluta@nxp.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20240624132949.124228-1-animeshagarwal28@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
