Add new xdp-rx-metadata-features member to netdev netlink
which exports a bitmask of supported kfuncs. Most of the patch
is autogenerated (headers), the only relevant part is netdev.yaml
and the changes in netdev-genl.c to marshal into netlink.
Example output on veth:
$ ip link add veth0 type veth peer name veth1 # ifndex == 12
$ ./tools/net/ynl/samples/netdev 12
Select ifc ($ifindex; or 0 = dump; or -2 ntf check): 12
veth1[12] xdp-features (23): basic redirect rx-sg xdp-rx-metadata-features (3): timestamp hash xdp-zc-max-segs=0
Cc: netdev@vger.kernel.org
Cc: Willem de Bruijn <willemb@google.com>
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Link: https://lore.kernel.org/r/20230913171350.369987-3-sdf@google.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Add support for SRIOV: send the requested number of VFs
to the device Control Plane, via the virtchnl message
and then enable the VFs using 'pci_enable_sriov'.
Add other ndo ops supported by the driver such as features_check,
set_rx_mode, validate_addr, set_mac_address, change_mtu, get_stats64,
set_features, and tx_timeout. Initialize the statistics task which
requests the queue related statistics to the CP. Add loopback
and promiscuous mode support and the respective virtchnl messages.
Finally, add documentation and build support for the driver.
Signed-off-by: Joshua Hay <joshua.a.hay@intel.com>
Co-developed-by: Alan Brady <alan.brady@intel.com>
Signed-off-by: Alan Brady <alan.brady@intel.com>
Co-developed-by: Madhu Chittim <madhu.chittim@intel.com>
Signed-off-by: Madhu Chittim <madhu.chittim@intel.com>
Co-developed-by: Phani Burra <phani.r.burra@intel.com>
Signed-off-by: Phani Burra <phani.r.burra@intel.com>
Reviewed-by: Sridhar Samudrala <sridhar.samudrala@intel.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Co-developed-by: Pavan Kumar Linga <pavan.kumar.linga@intel.com>
Signed-off-by: Pavan Kumar Linga <pavan.kumar.linga@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
This idea came after a particular workload requested
the quickack attribute set on routes, and a performance
drop was noticed for large bulk transfers.
For high throughput flows, it is best to use one cpu
running the user thread issuing socket system calls,
and a separate cpu to process incoming packets from BH context.
(With TSO/GRO, bottleneck is usually the 'user' cpu)
Problem is the user thread can spend a lot of time while holding
the socket lock, forcing BH handler to queue most of incoming
packets in the socket backlog.
Whenever the user thread releases the socket lock, it must first
process all accumulated packets in the backlog, potentially
adding latency spikes. Due to flood mitigation, having too many
packets in the backlog increases chance of unexpected drops.
Backlog processing unfortunately shifts a fair amount of cpu cycles
from the BH cpu to the 'user' cpu, thus reducing max throughput.
This patch takes advantage of the backlog processing,
and the fact that ACK are mostly cumulative.
The idea is to detect we are in the backlog processing
and defer all eligible ACK into a single one,
sent from tcp_release_cb().
This saves cpu cycles on both sides, and network resources.
Performance of a single TCP flow on a 200Gbit NIC:
- Throughput is increased by 20% (100Gbit -> 120Gbit).
- Number of generated ACK per second shrinks from 240,000 to 40,000.
- Number of backlog drops per second shrinks from 230 to 0.
Benchmark context:
- Regular netperf TCP_STREAM (no zerocopy)
- Intel(R) Xeon(R) Platinum 8481C (Saphire Rapids)
- MAX_SKB_FRAGS = 17 (~60KB per GRO packet)
This feature is guarded by a new sysctl, and enabled by default:
/proc/sys/net/ipv4/tcp_backlog_ack_defer
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Yuchung Cheng <ycheng@google.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Acked-by: Dave Taht <dave.taht@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
- VFIO direct character device (cdev) interface support. This extracts
the vfio device fd from the container and group model, and is intended
to be the native uAPI for use with IOMMUFD. (Yi Liu)
- Enhancements to the PCI hot reset interface in support of cdev usage.
(Yi Liu)
- Fix a potential race between registering and unregistering vfio files
in the kvm-vfio interface and extend use of a lock to avoid extra
drop and acquires. (Dmitry Torokhov)
- A new vfio-pci variant driver for the AMD/Pensando Distributed Services
Card (PDS) Ethernet device, supporting live migration. (Brett Creeley)
- Cleanups to remove redundant owner setup in cdx and fsl bus drivers,
and simplify driver init/exit in fsl code. (Li Zetao)
- Fix uninitialized hole in data structure and pad capability structures
for alignment. (Stefan Hajnoczi)
-----BEGIN PGP SIGNATURE-----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=eKSR
-----END PGP SIGNATURE-----
Merge tag 'vfio-v6.6-rc1' of https://github.com/awilliam/linux-vfio
Pull VFIO updates from Alex Williamson:
- VFIO direct character device (cdev) interface support. This extracts
the vfio device fd from the container and group model, and is
intended to be the native uAPI for use with IOMMUFD (Yi Liu)
- Enhancements to the PCI hot reset interface in support of cdev usage
(Yi Liu)
- Fix a potential race between registering and unregistering vfio files
in the kvm-vfio interface and extend use of a lock to avoid extra
drop and acquires (Dmitry Torokhov)
- A new vfio-pci variant driver for the AMD/Pensando Distributed
Services Card (PDS) Ethernet device, supporting live migration (Brett
Creeley)
- Cleanups to remove redundant owner setup in cdx and fsl bus drivers,
and simplify driver init/exit in fsl code (Li Zetao)
- Fix uninitialized hole in data structure and pad capability
structures for alignment (Stefan Hajnoczi)
* tag 'vfio-v6.6-rc1' of https://github.com/awilliam/linux-vfio: (53 commits)
vfio/pds: Send type for SUSPEND_STATUS command
vfio/pds: fix return value in pds_vfio_get_lm_file()
pds_core: Fix function header descriptions
vfio: align capability structures
vfio/type1: fix cap_migration information leak
vfio/fsl-mc: Use module_fsl_mc_driver macro to simplify the code
vfio/cdx: Remove redundant initialization owner in vfio_cdx_driver
vfio/pds: Add Kconfig and documentation
vfio/pds: Add support for firmware recovery
vfio/pds: Add support for dirty page tracking
vfio/pds: Add VFIO live migration support
vfio/pds: register with the pds_core PF
pds_core: Require callers of register/unregister to pass PF drvdata
vfio/pds: Initial support for pds VFIO driver
vfio: Commonize combine_ranges for use in other VFIO drivers
kvm/vfio: avoid bouncing the mutex when adding and deleting groups
kvm/vfio: ensure kvg instance stays around in kvm_vfio_group_add()
docs: vfio: Add vfio device cdev description
vfio: Compile vfio_group infrastructure optionally
vfio: Move the IOMMU_CAP_CACHE_COHERENCY check in __vfio_register_dev()
...
- Work from Carlos Bilbao to integrate rustdoc output into the generated
HTML documentation. This took some work to figure out how to do it
without slowing the docs build and without creating people who don't have
Rust installed, but Carlos got there.
- Move the loongarch and mips architecture documentation under
Documentation/arch/.
- Some more maintainer documentation from Jakub
...plus the usual assortment of updates, translations, and fixes.
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEIw+MvkEiF49krdp9F0NaE2wMflgFAmTvqNkPHGNvcmJldEBs
d24ubmV0AAoJEBdDWhNsDH5YgIgH/3drfLtlFtzLqDOzrzDXS8yGnE3pPdxw796b
/ZFzAK16wYKaKevYoIz8bVGGKaE1sEUW0mhlq4KGdfZuxLG8YnWS8URyCW4FDU2E
6qNL+8oJ8LZfID46f9Q8ZgfEz7yF/mhCqPk7MEswYtwbscs2ZTGCTGYB/5BHlBuT
LR+M89uLmHgr8S1o24v30OgiX+VvQFyu0xoxIhbiqUZvBd/XdfX2pgYd9BGzMj5q
C2ZP+V14g36c5pV0EO9TwhCXOF/WVrp7DbjbfWAsqBSLxvpXPydH2q1DUzGeQtP1
exujrBD1O8q3pPdaNA5R+h6cWlHmUZug9mE4BRLp9ErGrozwJsQ=
=C3Uv
-----END PGP SIGNATURE-----
Merge tag 'docs-6.6' of git://git.lwn.net/linux
Pull documentation updates from Jonathan Corbet:
"Documentation work keeps chugging along; this includes:
- Work from Carlos Bilbao to integrate rustdoc output into the
generated HTML documentation. This took some work to figure out how
to do it without slowing the docs build and without creating people
who don't have Rust installed, but Carlos got there
- Move the loongarch and mips architecture documentation under
Documentation/arch/
- Some more maintainer documentation from Jakub
... plus the usual assortment of updates, translations, and fixes"
* tag 'docs-6.6' of git://git.lwn.net/linux: (56 commits)
Docu: genericirq.rst: fix irq-example
input: docs: pxrc: remove reference to phoenix-sim
Documentation: serial-console: Fix literal block marker
docs/mm: remove references to hmm_mirror ops and clean typos
docs/zh_CN: correct regi_chg(),regi_add() to region_chg(),region_add()
Documentation: Fix typos
Documentation/ABI: Fix typos
scripts: kernel-doc: fix macro handling in enums
scripts: kernel-doc: parse DEFINE_DMA_UNMAP_[ADDR|LEN]
Documentation: riscv: Update boot image header since EFI stub is supported
Documentation: riscv: Add early boot document
Documentation: arm: Add bootargs to the table of added DT parameters
docs: kernel-parameters: Refer to the correct bitmap function
doc: update params of memhp_default_state=
docs: Add book to process/kernel-docs.rst
docs: sparse: fix invalid link addresses
docs: vfs: clean up after the iterate() removal
docs: Add a section on surveys to the researcher guidelines
docs: move mips under arch
docs: move loongarch under arch
...
Implement devlink port function commands to enable / disable IPsec
packet offloads. This is used to control the IPsec capability of the
device.
When ipsec_offload is enabled for a VF, it prevents adding IPsec packet
offloads on the PF, because the two cannot be active simultaneously due
to HW constraints. Conversely, if there are any active IPsec packet
offloads on the PF, it's not allowed to enable ipsec_packet on a VF,
until PF IPsec offloads are cleared.
Signed-off-by: Dima Chumak <dchumak@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Link: https://lore.kernel.org/r/20230825062836.103744-9-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Implement devlink port function commands to enable / disable IPsec
crypto offloads. This is used to control the IPsec capability of the
device.
When ipsec_crypto is enabled for a VF, it prevents adding IPsec crypto
offloads on the PF, because the two cannot be active simultaneously due
to HW constraints. Conversely, if there are any active IPsec crypto
offloads on the PF, it's not allowed to enable ipsec_crypto on a VF,
until PF IPsec offloads are cleared.
Signed-off-by: Dima Chumak <dchumak@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Link: https://lore.kernel.org/r/20230825062836.103744-8-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Expose port function commands to enable / disable IPsec packet offloads,
this is used to control the port IPsec capabilities.
When IPsec packet is disabled for a function of the port (default),
function cannot offload IPsec packet operations (encapsulation and XFRM
policy offload). When enabled, IPsec packet operations can be offloaded
by the function of the port, which includes crypto operation
(Encrypt/Decrypt), IPsec encapsulation and XFRM state and policy
offload.
Example of a PCI VF port which supports IPsec packet offloads:
$ devlink port show pci/0000:06:00.0/1
pci/0000:06:00.0/1: type eth netdev enp6s0pf0vf0 flavour pcivf pfnum 0 vfnum 0
function:
hw_addr 00:00:00:00:00:00 roce enable ipsec_packet disable
$ devlink port function set pci/0000:06:00.0/1 ipsec_packet enable
$ devlink port show pci/0000:06:00.0/1
pci/0000:06:00.0/1: type eth netdev enp6s0pf0vf0 flavour pcivf pfnum 0 vfnum 0
function:
hw_addr 00:00:00:00:00:00 roce enable ipsec_packet enable
Signed-off-by: Dima Chumak <dchumak@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/20230825062836.103744-3-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Expose port function commands to enable / disable IPsec crypto offloads,
this is used to control the port IPsec capabilities.
When IPsec crypto is disabled for a function of the port (default),
function cannot offload any IPsec crypto operations (Encrypt/Decrypt and
XFRM state offloading). When enabled, IPsec crypto operations can be
offloaded by the function of the port.
Example of a PCI VF port which supports IPsec crypto offloads:
$ devlink port show pci/0000:06:00.0/1
pci/0000:06:00.0/1: type eth netdev enp6s0pf0vf0 flavour pcivf pfnum 0 vfnum 0
function:
hw_addr 00:00:00:00:00:00 roce enable ipsec_crypto disable
$ devlink port function set pci/0000:06:00.0/1 ipsec_crypto enable
$ devlink port show pci/0000:06:00.0/1
pci/0000:06:00.0/1: type eth netdev enp6s0pf0vf0 flavour pcivf pfnum 0 vfnum 0
function:
hw_addr 00:00:00:00:00:00 roce enable ipsec_crypto enable
Signed-off-by: Dima Chumak <dchumak@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/20230825062836.103744-2-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This patch adds a new sysctl, named scheduler, to support for selection
of different schedulers. Export mptcp_get_scheduler helper to get this
sysctl.
Acked-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Mat Martineau <martineau@kernel.org>
Link: https://lore.kernel.org/r/20230821-upstream-net-next-20230818-v1-4-0c860fb256a8@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Point to NVIDIA documentation for device specific information now that the
Mellanox documentation site is deprecated. Refer to kernel documentation
sources for generic information not specific to mlx5 devices.
Signed-off-by: Rahul Rameshbabu <rrameshbabu@nvidia.com>
Reviewed-by: Gal Pressman <gal@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Improve aRFS observability by adding new set of counters. Each Rx
ring will have this set of counters listed below.
These counters are exposed through ethtool -S.
1) arfs_add: number of times a new rule has been created.
2) arfs_request_in: number of times a rule was requested to move from
its current Rx ring to a new Rx ring (incremented on the destination
Rx ring).
3) arfs_request_out: number of times a rule was requested to move out
from its current Rx ring (incremented on source/current Rx ring).
4) arfs_expired: number of times a rule has been expired by the
kernel and removed from HW.
5) arfs_err: number of times a rule creation or modification has
failed.
This patch removes rx[i]_xsk_arfs_err counter and its documentation in
mlx5/counters.rst since aRFS activity does not occur in XSK RQ's.
Signed-off-by: Adham Faris <afaris@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Reviewed-by: Shay Drory <shayd@nvidia.com>
Cross-merge networking fixes after downstream PR.
Conflicts:
drivers/net/ethernet/sfc/tc.c
fa165e1949 ("sfc: don't unregister flow_indr if it was never registered")
3bf969e88a ("sfc: add MAE table machinery for conntrack table")
https://lore.kernel.org/all/20230818112159.7430e9b4@canb.auug.org.au/
No adjacent changes.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add Kconfig entries and pds-vfio-pci.rst. Also, add an entry in the
MAINTAINERS file for this new driver.
It's not clear where documentation for vendor specific VFIO
drivers should live, so just re-use the current amd
ethernet location.
Signed-off-by: Brett Creeley <brett.creeley@amd.com>
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20230807205755.29579-9-brett.creeley@amd.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
In SCTP protocol, it is using the same timer (T2 timer) for SHUTDOWN and
SHUTDOWN_ACK retransmission. However in sctp conntrack the default timeout
value for SCTP_CONNTRACK_SHUTDOWN_ACK_SENT state is 3 secs while it's 300
msecs for SCTP_CONNTRACK_SHUTDOWN_SEND/RECV state.
As Paolo Valerio noticed, this might cause unwanted expiration of the ct
entry. In my test, with 1s tc netem delay set on the NAT path, after the
SHUTDOWN is sent, the sctp ct entry enters SCTP_CONNTRACK_SHUTDOWN_SEND
state. However, due to 300ms (too short) delay, when the SHUTDOWN_ACK is
sent back from the peer, the sctp ct entry has expired and been deleted,
and then the SHUTDOWN_ACK has to be dropped.
Also, it is confusing these two sysctl options always show 0 due to all
timeout values using sec as unit:
net.netfilter.nf_conntrack_sctp_timeout_shutdown_recd = 0
net.netfilter.nf_conntrack_sctp_timeout_shutdown_sent = 0
This patch fixes it by also using 3 secs for sctp shutdown send and recv
state in sctp conntrack, which is also RTO.initial value in SCTP protocol.
Note that the very short time value for SCTP_CONNTRACK_SHUTDOWN_SEND/RECV
was probably used for a rare scenario where SHUTDOWN is sent on 1st path
but SHUTDOWN_ACK is replied on 2nd path, then a new connection started
immediately on 1st path. So this patch also moves from SHUTDOWN_SEND/RECV
to CLOSE when receiving INIT in the ORIGINAL direction.
Fixes: 9fb9cbb108 ("[NETFILTER]: Add nf_conntrack subsystem.")
Reported-by: Paolo Valerio <pvalerio@redhat.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Florian Westphal <fw@strlen.de>
A new check for the tx devlink health reporter is introduced for
determining when the PTP port timestamping SQ is considered unhealthy. If
there are enough CQEs considered never to be delivered, the space that can
be utilized on the SQ decreases significantly, impacting performance and
usability of the SQ. The health reporter is triggered when the number of
likely never delivered port timestamping CQEs that utilize the space of the
PTP SQ is greater than 93.75% of the total capacity of the SQ. A devlink
health reporter recover method is also provided for this specific TX error
context that restarts the PTP SQ.
Signed-off-by: Rahul Rameshbabu <rrameshbabu@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Use a map structure for associating CQEs containing port timestamping
information with the appropriate skb. Track order of WQEs submitted using a
FIFO. Check if the corresponding port timestamping CQEs from the lookup
values in the FIFO are considered dropped due to time elapsed. Return the
lookup value to a freelist after consuming the skb. Reuse the freed lookup
in future WQE submission iterations.
The map structure uses an integer identifier for the key and returns an skb
corresponding to that identifier. Embed the integer identifier in the WQE
submitted to the WQ for the transmit path when the SQ is a PTP (port
timestamping) SQ. The embedded identifier can then be queried using a field
in the CQE of the corresponding port timestamping CQ. In the port
timestamping napi_poll context, the identifier is queried from the CQE
polled from CQ and used to lookup the corresponding skb from the WQE submit
path. The skb reference is removed from map and then embedded with the port
HW timestamp information from the CQE and eventually consumed.
The metadata freelist FIFO is an array containing integer identifiers that
can be pushed and popped in the FIFO. The purpose of this structure is
bookkeeping what identifier values can safely be used in a subsequent WQE
submission and should not contain identifiers that have still not been
reaped by processing a corresponding CQE completion on the port
timestamping CQ.
The ts_cqe_pending_list structure is a combination of an array and linked
list. The array is pre-populated with the nodes that will be added and
removed from the head of the linked list. Each node contains the unique
identifier value associated with the values submitted in the WQEs and
retrieved in the port timestamping CQEs. When a WQE is submitted, the node
in the array corresponding to the identifier popped from the metadata
freelist is added to the end of the CQE pending list and is marked as
"in-use". The node is removed from the linked list under two conditions.
The first condition is that the corresponding port timestamping CQE is
polled in the PTP napi_poll context. The second condition is that more than
a second has elapsed since the DMA timestamp value corresponding to the WQE
submission. When the first condition occurs, the "in-use" bit in the linked
list node is cleared, and the resources corresponding to the WQE submission
are then released. The second condition, however, indicates that the port
timestamping CQE will likely never be delivered. It's not impossible for
the device to post a CQE after an infinite amount of time though highly
improbable. In order to be resilient to this improbable case, resources
related to the corresponding WQE submission are still kept, the identifier
value is not returned to the freelist, and the "in-use" bit is cleared on
the node to indicate that it's no longer part of the linked list of "likely
to be delivered" port timestamping CQE identifiers. A count for the number
of port timestamping CQEs considered highly likely to never be delivered by
the device is maintained. This count gets decremented in the unlikely event
a port timestamping CQE considered unlikely to ever be delivered is polled
in the PTP napi_poll context.
Signed-off-by: Rahul Rameshbabu <rrameshbabu@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
De-duplicate documentation by removing mellanox/mlx5/devlink.rst. Instead,
only use the generic devlink documentation directory to document mlx5
devlink parameters. Avoid providing general devlink tool usage information
in mlx5-specific documentation.
Signed-off-by: Rahul Rameshbabu <rrameshbabu@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Gal Pressman <gal@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
The PSGMII interface is similar to QSGMII. The main difference
is that the PSGMII interface combines five SGMII lines into a
single link while in QSGMII only four lines are combined.
Similarly to the QSGMII, this interface mode might also needs
special handling within the MAC driver.
It is commonly used by Qualcomm with their QCA807x PHY series and
modern WiSoC-s.
Add definitions for the PHY layer to allow to express this type
of connection between the MAC and PHY.
Signed-off-by: Gabor Juhos <j4g8y7@gmail.com>
Signed-off-by: Robert Marko <robert.marko@sartura.hr>
Signed-off-by: David S. Miller <davem@davemloft.net>
In commit 82e896d992 ("docs: net: page_pool: use kdoc to avoid
duplicating the information") I shied away from using the DOC:
comments when moving to kdoc for documenting page_pool API,
because I wasn't sure how familiar people are with it.
Turns out there is already a DOC: comment for the intro, which
is the same in both places, modulo what looks like minor rewording.
Use the version from Documentation/ but keep the contents with
the code.
Acked-by: Jesper Dangaard Brouer <hawk@kernel.org>
Link: https://lore.kernel.org/r/20230807210051.1014580-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Split types and pure function declarations from page_pool.h
and add them in page_page/types.h, so that C sources can
include page_pool.h and headers should generally only include
page_pool/types.h as suggested by jakub.
Rename page_pool.h to page_pool/helpers.h to have both in
one place.
Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com>
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Reviewed-by: Alexander Duyck <alexanderduyck@fb.com>
Link: https://lore.kernel.org/r/20230804180529.2483231-2-aleksander.lobakin@intel.com
[Jakub: change microsoft/mana, fix kdoc paths in Documentation]
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add a note about QPL and RDA mode
Signed-off-by: Rushil Gupta <rushilg@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Praveen Kaligineedi <pkaligineedi@google.com>
Signed-off-by: Bailey Forrest <bcf@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
All struct members of the driver-facing APIs are documented twice,
in the code and under Documentation. This is a bit tedious.
I also get the feeling that a lot of developers will read the header
when coding, rather than the doc. Bring the two a little closer
together by using kdoc for structs and functions.
Using kdoc also gives us links (mentioning a function or struct
in the text gets replaced by a link to its doc).
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Jesper Dangaard Brouer <hawk@kernel.org>
Link: https://lore.kernel.org/r/20230802161821.3621985-3-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Using PP_FLAG_DMA_SYNC_DEV is a bit confusing. It was perhaps
more obvious when it was introduced but the page pool use
has grown beyond XDP and beyond packet-per-page so now
making the heads and tails out of this feature is not
trivial.
Obviously making the API more user friendly would be
a better fix, but until someone steps up to do that
let's at least document what the parameters are.
Relevant discussion in the first Link.
Link: https://lore.kernel.org/all/20230731114427.0da1f73b@kernel.org/
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Michael Chan <michael.chan@broadcom.com>
Acked-by: Jesper Dangaard Brouer <hawk@kernel.org>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Link: https://lore.kernel.org/r/20230802161821.3621985-2-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
accept_ra_min_rtr_lft only considered the lifetime of the default route
and discarded entire RAs accordingly.
This change renames accept_ra_min_rtr_lft to accept_ra_min_lft, and
applies the value to individual RA sections; in particular, router
lifetime, PIO preferred lifetime, and RIO lifetime. If any of those
lifetimes are lower than the configured value, the specific RA section
is ignored.
In order for the sysctl to be useful to Android, it should really apply
to all lifetimes in the RA, since that is what determines the minimum
frequency at which RAs must be processed by the kernel. Android uses
hardware offloads to drop RAs for a fraction of the minimum of all
lifetimes present in the RA (some networks have very frequent RAs (5s)
with high lifetimes (2h)). Despite this, we have encountered networks
that set the router lifetime to 30s which results in very frequent CPU
wakeups. Instead of disabling IPv6 (and dropping IPv6 ethertype in the
WiFi firmware) entirely on such networks, it seems better to ignore the
misconfigured routers while still processing RAs from other IPv6 routers
on the same network (i.e. to support IoT applications).
The previous implementation dropped the entire RA based on router
lifetime. This turned out to be hard to expand to the other lifetimes
present in the RA in a consistent manner; dropping the entire RA based
on RIO/PIO lifetimes would essentially require parsing the whole thing
twice.
Fixes: 1671bcfd76 ("net: add sysctl accept_ra_min_rtr_lft")
Cc: Lorenzo Colitti <lorenzo@google.com>
Signed-off-by: Patrick Rohr <prohr@google.com>
Reviewed-by: Maciej Żenczykowski <maze@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20230726230701.919212-1-prohr@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This change adds a new sysctl accept_ra_min_rtr_lft to specify the
minimum acceptable router lifetime in an RA. If the received RA router
lifetime is less than the configured value (and not 0), the RA is
ignored.
This is useful for mobile devices, whose battery life can be impacted
by networks that configure RAs with a short lifetime. On such networks,
the device should never gain IPv6 provisioning and should attempt to
drop RAs via hardware offload, if available.
Signed-off-by: Patrick Rohr <prohr@google.com>
Cc: Maciej Żenczykowski <maze@google.com>
Cc: Lorenzo Colitti <lorenzo@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
There seems to be no user calling page_pool_release_page()
for legit reasons, all the users simply haven't been converted
to skb-based recycling, yet. Previous changes converted them.
Update the docs, and unexport the function.
Link: https://lore.kernel.org/r/20230720010409.1967072-4-kuba@kernel.org
Reviewed-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add example tc-htb commands for Round robin scheduling
Signed-off-by: Hariprasad Kelam <hkelam@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
-----BEGIN PGP SIGNATURE-----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=VRCb
-----END PGP SIGNATURE-----
Merge tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Alexei Starovoitov says:
====================
pull-request: bpf-next 2023-07-19
We've added 45 non-merge commits during the last 3 day(s) which contain
a total of 71 files changed, 7808 insertions(+), 592 deletions(-).
The main changes are:
1) multi-buffer support in AF_XDP, from Maciej Fijalkowski,
Magnus Karlsson, Tirthendu Sarkar.
2) BPF link support for tc BPF programs, from Daniel Borkmann.
3) Enable bpf_map_sum_elem_count kfunc for all program types,
from Anton Protopopov.
4) Add 'owner' field to bpf_rb_node to fix races in shared ownership,
Dave Marchevsky.
5) Prevent potential skb_header_pointer() misuse, from Alexei Starovoitov.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (45 commits)
bpf, net: Introduce skb_pointer_if_linear().
bpf: sync tools/ uapi header with
selftests/bpf: Add mprog API tests for BPF tcx links
selftests/bpf: Add mprog API tests for BPF tcx opts
bpftool: Extend net dump with tcx progs
libbpf: Add helper macro to clear opts structs
libbpf: Add link-based API for tcx
libbpf: Add opts-based attach/detach/query API for tcx
bpf: Add fd-based tcx multi-prog infra with link support
bpf: Add generic attach/detach/query API for multi-progs
selftests/xsk: reset NIC settings to default after running test suite
selftests/xsk: add test for too many frags
selftests/xsk: add metadata copy test for multi-buff
selftests/xsk: add invalid descriptor test for multi-buffer
selftests/xsk: add unaligned mode test for multi-buffer
selftests/xsk: add basic multi-buffer test
selftests/xsk: transmit and receive multi-buffer packets
xsk: add multi-buffer documentation
i40e: xsk: add TX multi-buffer support
ice: xsk: Tx multi-buffer support
...
====================
Link: https://lore.kernel.org/r/20230719175424.75717-1-alexei.starovoitov@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
With modern NIC drivers shifting to full page allocations per
received frame, we face the following issue:
TCP has one per-netns sysctl used to tweak how to translate
a memory use into an expected payload (RWIN), in RX path.
tcp_win_from_space() implementation is limited to few cases.
For hosts dealing with various MSS, we either under estimate
or over estimate the RWIN we send to the remote peers.
For instance with the default sysctl_tcp_adv_win_scale value,
we expect to store 50% of payload per allocated chunk of memory.
For the typical use of MTU=1500 traffic, and order-0 pages allocations
by NIC drivers, we are sending too big RWIN, leading to potential
tcp collapse operations, which are extremely expensive and source
of latency spikes.
This patch makes sysctl_tcp_adv_win_scale obsolete, and instead
uses a per socket scaling factor, so that we can precisely
adjust the RWIN based on effective skb->len/skb->truesize ratio.
This patch alone can double TCP receive performance when receivers
are too slow to drain their receive queue, or by allowing
a bigger RWIN when MSS is close to PAGE_SIZE.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Link: https://lore.kernel.org/r/20230717152917.751987-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Create a new netconsole runtime option that prepends the kernel version in
the netconsole message. This is useful to map kernel messages to kernel
version in a simple way, i.e., without checking somewhere which kernel
version the host that sent the message is using.
If this option is selected, then the "<release>," is prepended before the
netconsole message. This is an example of a netconsole output, with
release feature enabled:
6.4.0-01762-ga1ba2ffe946e;12,426,112883998,-;this is a test
Cc: Dave Jones <davej@codemonkey.org.uk>
Signed-off-by: Breno Leitao <leitao@debian.org>
Link: https://lore.kernel.org/r/20230714111330.3069605-1-leitao@debian.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Current release - regressions:
- nvme-tcp: fix comma-related oops after sendpage changes
Current release - new code bugs:
- ptp: make max_phase_adjustment sysfs device attribute invisible
when not supported
Previous releases - regressions:
- sctp: fix potential deadlock on &net->sctp.addr_wq_lock
- mptcp:
- ensure subflow is unhashed before cleaning the backlog
- do not rely on implicit state check in mptcp_listen()
Previous releases - always broken:
- net: fix net_dev_start_xmit trace event vs skb_transport_offset()
- Bluetooth:
- fix use-bdaddr-property quirk
- L2CAP: fix multiple UaFs
- ISO: use hci_sync for setting CIG parameters
- hci_event: fix Set CIG Parameters error status handling
- hci_event: fix parsing of CIS Established Event
- MGMT: fix marking SCAN_RSP as not connectable
- wireguard: queuing: use saner cpu selection wrapping
- sched: act_ipt: various bug fixes for iptables <> TC interactions
- sched: act_pedit: add size check for TCA_PEDIT_PARMS_EX
- dsa: fixes for receiving PTP packets with 8021q and sja1105 tagging
- eth: sfc: fix null-deref in devlink port without MAE access
- eth: ibmvnic: do not reset dql stats on NON_FATAL err
Misc:
- xsk: honor SO_BINDTODEVICE on bind
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=9yzk
-----END PGP SIGNATURE-----
Merge tag 'net-6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from bluetooth, bpf and wireguard.
Current release - regressions:
- nvme-tcp: fix comma-related oops after sendpage changes
Current release - new code bugs:
- ptp: make max_phase_adjustment sysfs device attribute invisible
when not supported
Previous releases - regressions:
- sctp: fix potential deadlock on &net->sctp.addr_wq_lock
- mptcp:
- ensure subflow is unhashed before cleaning the backlog
- do not rely on implicit state check in mptcp_listen()
Previous releases - always broken:
- net: fix net_dev_start_xmit trace event vs skb_transport_offset()
- Bluetooth:
- fix use-bdaddr-property quirk
- L2CAP: fix multiple UaFs
- ISO: use hci_sync for setting CIG parameters
- hci_event: fix Set CIG Parameters error status handling
- hci_event: fix parsing of CIS Established Event
- MGMT: fix marking SCAN_RSP as not connectable
- wireguard: queuing: use saner cpu selection wrapping
- sched: act_ipt: various bug fixes for iptables <> TC interactions
- sched: act_pedit: add size check for TCA_PEDIT_PARMS_EX
- dsa: fixes for receiving PTP packets with 8021q and sja1105 tagging
- eth: sfc: fix null-deref in devlink port without MAE access
- eth: ibmvnic: do not reset dql stats on NON_FATAL err
Misc:
- xsk: honor SO_BINDTODEVICE on bind"
* tag 'net-6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (70 commits)
nfp: clean mc addresses in application firmware when closing port
selftests: mptcp: pm_nl_ctl: fix 32-bit support
selftests: mptcp: depend on SYN_COOKIES
selftests: mptcp: userspace_pm: report errors with 'remove' tests
selftests: mptcp: userspace_pm: use correct server port
selftests: mptcp: sockopt: return error if wrong mark
selftests: mptcp: sockopt: use 'iptables-legacy' if available
selftests: mptcp: connect: fail if nft supposed to work
mptcp: do not rely on implicit state check in mptcp_listen()
mptcp: ensure subflow is unhashed before cleaning the backlog
s390/qeth: Fix vipa deletion
octeontx-af: fix hardware timestamp configuration
net: dsa: sja1105: always enable the send_meta options
net: dsa: tag_sja1105: fix MAC DA patching from meta frames
net: Replace strlcpy with strscpy
pptp: Fix fib lookup calls.
mlxsw: spectrum_router: Fix an IS_ERR() vs NULL check
net/sched: act_pedit: Add size check for TCA_PEDIT_PARMS_EX
xsk: Honor SO_BINDTODEVICE on bind
ptp: Make max_phase_adjustment sysfs device attribute invisible when not supported
...
Initial creation of an AF_XDP socket requires CAP_NET_RAW capability. A
privileged process might create the socket and pass it to a non-privileged
process for later use. However, that process will be able to bind the socket
to any network interface. Even though it will not be able to receive any
traffic without modification of the BPF map, the situation is not ideal.
Sockets already have a mechanism that can be used to restrict what interface
they can be attached to. That is SO_BINDTODEVICE.
To change the SO_BINDTODEVICE binding the process will need CAP_NET_RAW.
Make xsk_bind() honor the SO_BINDTODEVICE in order to allow safer workflow
when non-privileged process is using AF_XDP.
The intended workflow is following:
1. First process creates a bare socket with socket(AF_XDP, ...).
2. First process loads the XSK program to the interface.
3. First process adds the socket fd to a BPF map.
4. First process ties socket fd to a particular interface using
SO_BINDTODEVICE.
5. First process sends socket fd to a second process.
6. Second process allocates UMEM.
7. Second process binds socket to the interface with bind(...).
8. Second process sends/receives the traffic.
All the steps above are possible today if the first process is privileged
and the second one has sufficient RLIMIT_MEMLOCK and no capabilities.
However, the second process will be able to bind the socket to any interface
it wants on step 7 and send traffic from it. With the proposed change, the
second process will be able to bind the socket only to a specific interface
chosen by the first process at step 4.
Fixes: 965a990984 ("xsk: add support for bind for Rx")
Signed-off-by: Ilya Maximets <i.maximets@ovn.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Magnus Karlsson <magnus.karlsson@intel.com>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Link: https://lore.kernel.org/bpf/20230703175329.3259672-1-i.maximets@ovn.org
resume support in vdpa/solidrun
structure size optimizations in virtio_pci
new pds_vdpa driver
immediate initialization mechanism for vdpa/ifcvf
interrupt bypass for vdpa/mlx5
multiple worker support for vhost
viirtio net in Intel F2000X-PL support for vdpa/ifcvf
fixes, cleanups all over the place
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmSi95cPHG1zdEByZWRo
YXQuY29tAAoJECgfDbjSjVRpJ58H/A++mwjLsoiJ/3xgf2S2Fn0p0lkgxg61LrjD
Q9p8zstG/BndRvv018XcJKoklaHpb4WcmNctKRNZJ6BjPj+ZwdADuSzoaUNurPD4
M3s/nXVWvg7/2FifGDpCzQpyw0MR0Ip6/yqtdTl4vuLZGxI1nNGDfYbDgc3vZeCp
pYTLsl/XUPzix4iJouEQqy5rmlUia3IE751aECrdk58z17lDo/Znar4hsXF0acQY
+G6C/MNZQgf1rtJIl901h54W8rAoubxeda80uXSQk9fDyPG/wZYh2wFBGPi9qYa+
9E+tOgHprMZ7G5GEopDdd19UctuW7M+YXPWZa1ijp8EZXmMpzuo=
=5tdF
-----END PGP SIGNATURE-----
Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost
Pull virtio updates from Michael Tsirkin:
- resume support in vdpa/solidrun
- structure size optimizations in virtio_pci
- new pds_vdpa driver
- immediate initialization mechanism for vdpa/ifcvf
- interrupt bypass for vdpa/mlx5
- multiple worker support for vhost
- viirtio net in Intel F2000X-PL support for vdpa/ifcvf
- fixes, cleanups all over the place
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: (48 commits)
vhost: Make parameter name match of vhost_get_vq_desc()
vduse: fix NULL pointer dereference
vhost: Allow worker switching while work is queueing
vhost_scsi: add support for worker ioctls
vhost: allow userspace to create workers
vhost: replace single worker pointer with xarray
vhost: add helper to parse userspace vring state/file
vhost: remove vhost_work_queue
vhost_scsi: flush IO vqs then send TMF rsp
vhost_scsi: convert to vhost_vq_work_queue
vhost_scsi: make SCSI cmd completion per vq
vhost_sock: convert to vhost_vq_work_queue
vhost: convert poll work to be vq based
vhost: take worker or vq for flushing
vhost: take worker or vq instead of dev for queueing
vhost, vhost_net: add helper to check if vq has work
vhost: add vhost_worker pointer to vhost_virtqueue
vhost: dynamically allocate vhost_worker
vhost: create worker at end of vhost_dev_set_owner
virtio_bt: call scheduler when we free unused buffs
...
source.codeaurora.org is no longer accessible and so the reference link
in the documentation is not useful. Use iproute2 instead as it has a
rmnet module for configuration.
Fixes: ceed73a2cf ("drivers: net: ethernet: qualcomm: rmnet: Initial implementation")
Signed-off-by: Sean Tranchetti <quic_stranche@quicinc.com>
Signed-off-by: Subash Abhinov Kasiviswanathan <quic_subashab@quicinc.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add the documentation and Kconfig entry for pds_vdpa driver.
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20230519215632.12343-12-shannon.nelson@amd.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
1) Added a new event handler to firmware sync reset, which is used to
support firmware sync reset flow on smart NIC. Adding this new stage to
the flow enables the firmware to ensure host PFs unload before ECPFs
unload, to avoid race of PFs recovery.
2) Debugfs for mlx5 eswitch bridge offloads
3) Added two new counters for vport stats
4) Minor Fixups and cleanups for net-next branch
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEGhZs6bAKwk/OTgTpSD+KveBX+j4FAmSMsbEACgkQSD+KveBX
+j6BAwgAyiZWqA8VEabjJtJNh30Ghfi5OkheAvJmPkd9UlM04EPw4x1dZ/z/jBnU
piBixrs0ou92ZF//Ph1vlf0Jae/YdfKdNcm/FEydspHZC0C2QqeNpDDWl0z3STqB
leBiFPjjBgqYWZWGwgaVlGOyzglTTu5DilkKVy1Ohf7j50P0FppViOsvQle3pAqO
UUXITN8si2AK/03JBJQNIulyyVP+EN9/+d8ZVZagKgurB9Qim9lUbZCerXacEUGV
M/XxYd+pwSAMh3TYlt2x1jv1aSpVwPzIolidJTjUd4gaImi40dw36kNP5BcoSMfr
QEaB1NMv4zfAwiZ7XaXY6/l5wqTjOg==
=vYKY
-----END PGP SIGNATURE-----
Merge tag 'mlx5-updates-2023-06-16' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux
mlx5-updates-2023-06-16
1) Added a new event handler to firmware sync reset, which is used to
support firmware sync reset flow on smart NIC. Adding this new stage to
the flow enables the firmware to ensure host PFs unload before ECPFs
unload, to avoid race of PFs recovery.
2) Debugfs for mlx5 eswitch bridge offloads
3) Added two new counters for vport stats
4) Minor Fixups and cleanups for net-next branch
Signed-off-by: David S. Miller <davem@davemloft.net>
Under certain circumstances, the tcp receive buffer memory limit
set by autotuning (sk_rcvbuf) is increased due to incoming data
packets as a result of the window not closing when it should be.
This can result in the receive buffer growing all the way up to
tcp_rmem[2], even for tcp sessions with a low BDP.
To reproduce: Connect a TCP session with the receiver doing
nothing and the sender sending small packets (an infinite loop
of socket send() with 4 bytes of payload with a sleep of 1 ms
in between each send()). This will cause the tcp receive buffer
to grow all the way up to tcp_rmem[2].
As a result, a host can have individual tcp sessions with receive
buffers of size tcp_rmem[2], and the host itself can reach tcp_mem
limits, causing the host to go into tcp memory pressure mode.
The fundamental issue is the relationship between the granularity
of the window scaling factor and the number of byte ACKed back
to the sender. This problem has previously been identified in
RFC 7323, appendix F [1].
The Linux kernel currently adheres to never shrinking the window.
In addition to the overallocation of memory mentioned above, the
current behavior is functionally incorrect, because once tcp_rmem[2]
is reached when no remediations remain (i.e. tcp collapse fails to
free up any more memory and there are no packets to prune from the
out-of-order queue), the receiver will drop in-window packets
resulting in retransmissions and an eventual timeout of the tcp
session. A receive buffer full condition should instead result
in a zero window and an indefinite wait.
In practice, this problem is largely hidden for most flows. It
is not applicable to mice flows. Elephant flows can send data
fast enough to "overrun" the sk_rcvbuf limit (in a single ACK),
triggering a zero window.
But this problem does show up for other types of flows. Examples
are websockets and other type of flows that send small amounts of
data spaced apart slightly in time. In these cases, we directly
encounter the problem described in [1].
RFC 7323, section 2.4 [2], says there are instances when a retracted
window can be offered, and that TCP implementations MUST ensure
that they handle a shrinking window, as specified in RFC 1122,
section 4.2.2.16 [3]. All prior RFCs on the topic of tcp window
management have made clear that sender must accept a shrunk window
from the receiver, including RFC 793 [4] and RFC 1323 [5].
This patch implements the functionality to shrink the tcp window
when necessary to keep the right edge within the memory limit by
autotuning (sk_rcvbuf). This new functionality is enabled with
the new sysctl: net.ipv4.tcp_shrink_window
Additional information can be found at:
https://blog.cloudflare.com/unbounded-memory-usage-by-tcp-for-receive-buffers-and-how-we-fixed-it/
[1] https://www.rfc-editor.org/rfc/rfc7323#appendix-F
[2] https://www.rfc-editor.org/rfc/rfc7323#section-2.4
[3] https://www.rfc-editor.org/rfc/rfc1122#page-91
[4] https://www.rfc-editor.org/rfc/rfc793
[5] https://www.rfc-editor.org/rfc/rfc1323
Signed-off-by: Mike Freemon <mfreemon@cloudflare.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add counter for number of unicast, multicast and broadcast packets/
octets that were loopback.
Signed-off-by: Or Har-Toov <ohartoov@nvidia.com>
Reviewed-by: Avihai Horon <avihaih@nvidia.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
The current implementation allocates page-sized rx buffers.
As traffic may consist of different types and sizes of packets,
in various cases, buffers are not fully used.
This change (Dynamic RX Buffers - DRB) uses part of the allocated rx
page needed for the incoming packet, and returns the rest of the
unused page to be used again as an rx buffer for future packets.
A threshold of 2K for unused space has been set in order to declare
whether the remainder of the page can be reused again as an rx buffer.
As a page may be reused, dma_sync_single_for_cpu() is added in order
to sync the memory to the CPU side after it was owned by the HW.
In addition, when the rx page can no longer be reused, it is being
unmapped using dma_page_unmap(), which implicitly syncs and then
unmaps the entire page. In case the kernel still handles the skbs
pointing to the previous buffers from that rx page, it may access
garbage pointers, caused by the implicit sync overwriting them.
The implicit dma sync is removed by replacing dma_page_unmap() with
dma_unmap_page_attrs() with DMA_ATTR_SKIP_CPU_SYNC flag.
The functionality is disabled for XDP traffic to avoid handling
several descriptors per packet.
Signed-off-by: Arthur Kiyanovski <akiyano@amazon.com>
Signed-off-by: Shay Agroskin <shayagr@amazon.com>
Signed-off-by: David Arinzon <darinzon@amazon.com>
Link: https://lore.kernel.org/r/20230612121448.28829-1-darinzon@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In case user wants to configure the SFs, for example: to use only vdpa
functionality, he needs to fully probe a SF, configure what he wants,
and afterward reload the SF.
In order to save the time of the reload, local SFs will probe without
any auxiliary sub-device, so that the SFs can be configured prior to
its full probe.
The defaults of the enable_* devlink params of these SFs are set to
false.
Usage example:
Create SF:
$ devlink port add pci/0000:08:00.0 flavour pcisf pfnum 0 sfnum 11
$ devlink port function set pci/0000:08:00.0/32768 \
hw_addr 00:00:00:00:00:11 state active
Enable ETH auxiliary device:
$ devlink dev param set auxiliary/mlx5_core.sf.1 \
name enable_eth value true cmode driverinit
Now, in order to fully probe the SF, use devlink reload:
$ devlink dev reload auxiliary/mlx5_core.sf.1
At this point the user have SF devlink instance with auxiliary device
for the Ethernet functionality only.
Signed-off-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
1) Support 4 ports VF LAG, part 2/2
2) Few extra trivial cleanup patches
Shay Drory Says:
================
Support 4 ports VF LAG, part 2/2
This series continues the series[1] "Support 4 ports VF LAG, part1/2".
This series adds support for 4 ports VF LAG (single FDB E-Switch).
This series of patches refactoring LAG code that make assumptions
about VF LAG supporting only two ports and then enable 4 ports VF LAG.
Patch 1:
- Fix for ib rep code
Patches 2-5:
- Refactors LAG layer.
Patches 6-7:
- Block LAG types which doesn't support 4 ports.
Patch 8:
- Enable 4 ports VF LAG.
This series specifically allows HCAs with 4 ports to create a VF LAG
with only 4 ports. It is not possible to create a VF LAG with 2 or 3
ports using HCAs that have 4 ports.
Currently, the Merged E-Switch feature only supports HCAs with 2 ports.
However, upcoming patches will introduce support for HCAs with 4 ports.
In order to activate VF LAG a user can execute:
devlink dev eswitch set pci/0000:08:00.0 mode switchdev
devlink dev eswitch set pci/0000:08:00.1 mode switchdev
devlink dev eswitch set pci/0000:08:00.2 mode switchdev
devlink dev eswitch set pci/0000:08:00.3 mode switchdev
ip link add name bond0 type bond
ip link set dev bond0 type bond mode 802.3ad
ip link set dev eth2 master bond0
ip link set dev eth3 master bond0
ip link set dev eth4 master bond0
ip link set dev eth5 master bond0
Where eth2, eth3, eth4 and eth5 are net-interfaces of pci/0000:08:00.0
pci/0000:08:00.1 pci/0000:08:00.2 pci/0000:08:00.3 respectively.
User can verify LAG state and type via debugfs:
/sys/kernel/debug/mlx5/0000\:08\:00.0/lag/state
/sys/kernel/debug/mlx5/0000\:08\:00.0/lag/type
[1]
https://lore.kernel.org/netdev/20230601060118.154015-1-saeed@kernel.org/T/#mf1d2083780970ba277bfe721554d4925f03f36d1
================
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEGhZs6bAKwk/OTgTpSD+KveBX+j4FAmSA7/0ACgkQSD+KveBX
+j4faQgApm14Id8QTB0rSj9tO1tJFtSgCcpDN9DtyYWuq3B0rGW9CPC1rPdaFOlt
xst7PtEaCiJu7a7dwlH/kFLSAlXpZHdUZA+VG8JF0aYV8qOV/0R0xQKZgP68kwkn
vFZqZCzA1vR6egK3AweAjKAVaqDKSSKVlFGXJGzyNpGMWpGEEKodlZKCH7Jd580F
UFhCqbyY8vccMUa3cvrLVjePUjdM1xxsLKHWmYXTaN2NkoLvOYXnXThElu7skm96
Uqv8B9t2FoojZPBxgiJtoGKZ516+1dozORq7ioQug3oG9P/vpTY5QnTMKSZpJUTH
5cdSCdqii4UDPqfe0PtdEdE1O2aWig==
=A44p
-----END PGP SIGNATURE-----
Merge tag 'mlx5-updates-2023-06-06' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux
Saeed Mahameed says:
====================
mlx5-updates-2023-06-06
1) Support 4 ports VF LAG, part 2/2
2) Few extra trivial cleanup patches
Shay Drory Says:
================
Support 4 ports VF LAG, part 2/2
This series continues the series[1] "Support 4 ports VF LAG, part1/2".
This series adds support for 4 ports VF LAG (single FDB E-Switch).
This series of patches refactoring LAG code that make assumptions
about VF LAG supporting only two ports and then enable 4 ports VF LAG.
Patch 1:
- Fix for ib rep code
Patches 2-5:
- Refactors LAG layer.
Patches 6-7:
- Block LAG types which doesn't support 4 ports.
Patch 8:
- Enable 4 ports VF LAG.
This series specifically allows HCAs with 4 ports to create a VF LAG
with only 4 ports. It is not possible to create a VF LAG with 2 or 3
ports using HCAs that have 4 ports.
Currently, the Merged E-Switch feature only supports HCAs with 2 ports.
However, upcoming patches will introduce support for HCAs with 4 ports.
In order to activate VF LAG a user can execute:
devlink dev eswitch set pci/0000:08:00.0 mode switchdev
devlink dev eswitch set pci/0000:08:00.1 mode switchdev
devlink dev eswitch set pci/0000:08:00.2 mode switchdev
devlink dev eswitch set pci/0000:08:00.3 mode switchdev
ip link add name bond0 type bond
ip link set dev bond0 type bond mode 802.3ad
ip link set dev eth2 master bond0
ip link set dev eth3 master bond0
ip link set dev eth4 master bond0
ip link set dev eth5 master bond0
Where eth2, eth3, eth4 and eth5 are net-interfaces of pci/0000:08:00.0
pci/0000:08:00.1 pci/0000:08:00.2 pci/0000:08:00.3 respectively.
User can verify LAG state and type via debugfs:
/sys/kernel/debug/mlx5/0000\:08\:00.0/lag/state
/sys/kernel/debug/mlx5/0000\:08\:00.0/lag/type
[1]
https://lore.kernel.org/netdev/20230601060118.154015-1-saeed@kernel.org/T/#mf1d2083780970ba277bfe721554d4925f03f36d1
================
* tag 'mlx5-updates-2023-06-06' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux:
net/mlx5e: simplify condition after napi budget handling change
mlx5/core: E-Switch, Allocate ECPF vport if it's an eswitch manager
net/mlx5: Skip inline mode check after mlx5_eswitch_enable_locked() failure
net/mlx5e: TC, refactor access to hash key
net/mlx5e: Remove RX page cache leftovers
net/mlx5e: Expose catastrophic steering error counters
net/mlx5: Enable 4 ports VF LAG
net/mlx5: LAG, block multiport eswitch LAG in case ldev have more than 2 ports
net/mlx5: LAG, block multipath LAG in case ldev have more than 2 ports
net/mlx5: LAG, change mlx5_shared_fdb_supported() to static
net/mlx5: LAG, generalize handling of shared FDB
net/mlx5: LAG, check if all eswitches are paired for shared FDB
{net/RDMA}/mlx5: introduce lag_for_each_peer
RDMA/mlx5: Free second uplink ib port
====================
Link: https://lore.kernel.org/r/20230607210410.88209-1-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Cross-merge networking fixes after downstream PR.
Conflicts:
net/sched/sch_taprio.c
d636fc5dd6 ("net: sched: add rcu annotations around qdisc->qdisc_sleeping")
dced11ef84 ("net/sched: taprio: don't overwrite "sch" variable in taprio_dump_class_stats()")
net/ipv4/sysctl_net_ipv4.c
e209fee411 ("net/ipv4: ping_group_range: allow GID from 2147483648 to 4294967294")
ccce324dab ("tcp: make the first N SYN RTO backoffs linear")
https://lore.kernel.org/all/20230605100816.08d41a7b@canb.auug.org.au/
No adjacent changes.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add generated_pkt_steering_fail and handled_pkt_steering_fail to devlink
heatlth reporter.
generated_pkt_steering_fail indicates the number of packets dropped due to
illegal steering operation within the vport steering domain.
handled_pkt_steering_fail indicates the number of packets dropped due to
illegal steering operation, originated by the vport.
Also, update devlink reporter functionality documentation with the newly
exposed counters.
Signed-off-by: Lama Kayal <lkayal@nvidia.com>
Reviewed-by: Rahul Rameshbabu <rrameshbabu@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
With this commit, all the GIDs ("0 4294967294") can be written to the
"net.ipv4.ping_group_range" sysctl.
Note that 4294967295 (0xffffffff) is an invalid GID (see gid_valid() in
include/linux/uidgid.h), and an attempt to register this number will cause
-EINVAL.
Prior to this commit, only up to GID 2147483647 could be covered.
Documentation/networking/ip-sysctl.rst had "0 4294967295" as an example
value, but this example was wrong and causing -EINVAL.
Fixes: c319b4d76b ("net: ipv4: add IPPROTO_ICMP socket kind")
Co-developed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Akihiro Suda <akihiro.suda.cz@hco.ntt.co.jp>
Signed-off-by: David S. Miller <davem@davemloft.net>
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEGhZs6bAKwk/OTgTpSD+KveBX+j4FAmRu2ZQACgkQSD+KveBX
+j4sQAgAtCLJfYADpU7yWPZ3SMAnTelc65PfawdjEyBlRjE2CxsQ/bnRiWUXuR5i
twsGvAJxQfpDBV0z/TxcdYznpLxHSIhosg0pRH+Tc4Lk6PjdFK7Sviqyw9JTrCJX
rVaLJ5N877Pu5gH++OqFs8C+2gkrppQKWJtrmUaAPPdXixkr2q2pwlJiCOLpGYTN
9yGKBO29wtvD0AJsssS8VJgy6uHMaOsTTACR4fYuV/huTKa5QfYBdJY1HqEs7Fe2
LhGyLjVx6nHD8kt+fL9J2LJ6CLnG9a50reKuZnCOBa42obahUBCAQ5mr1mQlzNr5
cTOmAZM+OWOa7bXJAY9AbRorlr1A4w==
=DRJZ
-----END PGP SIGNATURE-----
Merge tag 'mlx5-fixes-2023-05-24' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux
Saeed Mahameed says:
====================
mlx5 fixes 2023-05-24
This series includes bug fixes for the mlx5 driver.
* tag 'mlx5-fixes-2023-05-24' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux:
Documentation: net/mlx5: Wrap notes in admonition blocks
Documentation: net/mlx5: Add blank line separator before numbered lists
Documentation: net/mlx5: Use bullet and definition lists for vnic counters description
Documentation: net/mlx5: Wrap vnic reporter devlink commands in code blocks
net/mlx5: Fix check for allocation failure in comp_irqs_request_pci()
net/mlx5: DR, Add missing mutex init/destroy in pattern manager
net/mlx5e: Move Ethernet driver debugfs to profile init callback
net/mlx5e: Don't attach netdev profile while handling internal error
net/mlx5: Fix post parse infra to only parse every action once
net/mlx5e: Use query_special_contexts cmd only once per mdev
net/mlx5: fw_tracer, Fix event handling
net/mlx5: SF, Drain health before removing device
net/mlx5: Drain health before unregistering devlink
net/mlx5e: Do not update SBCM when prio2buffer command is invalid
net/mlx5e: Consider internal buffers size in port buffer calculations
net/mlx5e: Prevent encap offload when neigh update is running
net/mlx5e: Extract remaining tunnel encap code to dedicated file
====================
Link: https://lore.kernel.org/r/20230525034847.99268-1-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Enable the upper layer protocol to specify the SNI peername. This
avoids the need for tlshd to use a DNS lookup, which can return a
hostname that doesn't match the incoming certificate's SubjectName.
Fixes: 2fd5532044 ("net/handshake: Add a kernel API for requesting a TLSv1.3 handshake")
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Wrap note paragraphs in note:: directive as it better fit for the
purpose of noting devlink commands.
Fixes: f2d51e5793 ("net/mlx5: Separate mlx5 driver documentation into multiple pages")
Fixes: cf14af140a ("net/mlx5e: Add vnic devlink health reporter to representors")
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
The doc forgets to add separator before numbered lists, which causes the
lists to be appended to previous paragraph inline instead.
Add the missing separator.
Fixes: f2d51e5793 ("net/mlx5: Separate mlx5 driver documentation into multiple pages")
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
"vnic reporter" section contains unformatted description for vnic
counters, which is rendered as one long paragraph instead of list.
Use bullet and definition lists to match other lists.
Fixes: b0bc615df4 ("net/mlx5: Add vnic devlink health reporter to PFs/VFs")
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: Daniel Machon <daniel.machon@microchip.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
There was a change previously to stop SR-IOV and LAG from existing on the
same interface. This was to prevent the violation of LACP (Link
Aggregation Control Protocol). The method to achieve this was to add a
no-op Rx handler onto the netdev when SR-IOV VFs were present, thus
blocking bonding, bridging, etc from claiming the interface by adding
its own Rx handler. Also, when an interface was added into a aggregate,
then the SR-IOV capability was set to false.
There are some users that have in house solutions using both SR-IOV and
bridging/bonding that this method interferes with (e.g. creating duplicate
VFs on the bonded interfaces and failing between them when the interface
fails over).
It makes more sense to provide the most functionality
possible, the restriction on co-existence of these features will be
removed. No additional functionality is currently being provided beyond
what existed before the co-existence restriction was put into place. It is
up to the end user to not implement a solution that would interfere with
existing network protocols.
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Signed-off-by: Dave Ertman <david.m.ertman@intel.com>
Signed-off-by: Wojciech Drewek <wojciech.drewek@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Add QOS example configuration along with tc-htb commands
Signed-off-by: Hariprasad Kelam <hkelam@marvell.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
As low_thresh has no work in fragment reassembles,del it.
And Mark it deprecated in sysctl Document.
Signed-off-by: Angus Chen <angus.chen@jaguarmicro.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Enable the upper layer protocol to specify the SNI peername. This
avoids the need for tlshd to use a DNS lookup, which can return a
hostname that doesn't match the incoming certificate's SubjectName.
Fixes: 2fd5532044 ("net/handshake: Add a kernel API for requesting a TLSv1.3 handshake")
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently the SYN RTO schedule follows an exponential backoff
scheme, which can be unnecessarily conservative in cases where
there are link failures. In such cases, it's better to
aggressively try to retransmit packets, so it takes routers
less time to find a repath with a working link.
We chose a default value for this sysctl of 4, to follow
the macOS and IOS backoff scheme of 1,1,1,1,1,2,4,8, ...
MacOS and IOS have used this backoff schedule for over
a decade, since before this 2009 IETF presentation
discussed the behavior:
https://www.ietf.org/proceedings/75/slides/tcpm-1.pdf
This commit makes the SYN RTO schedule start with a number of
linear backoffs given by the following sysctl:
* tcp_syn_linear_timeouts
This changes the SYN RTO scheme to be: init_rto_val for
tcp_syn_linear_timeouts, exp backoff starting at init_rto_val
For example if init_rto_val = 1 and tcp_syn_linear_timeouts = 2, our
backoff scheme would be: 1, 1, 1, 2, 4, 8, 16, ...
Signed-off-by: David Morley <morleyd@google.com>
Signed-off-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Tested-by: David Morley <morleyd@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20230509180558.2541885-1-morleyd.kernel@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Fix the chapter heading for "X.25 Device Driver Interface" so that it
does not contain a trailing '-' character, which makes Sphinx
omit this heading from the contents.
Reverse the order of the x25.rst and x25-iface.rst files in the index
so that the project introduction (x25.rst) comes first.
Fixes: 883780af72 ("docs: networking: convert x25-iface.txt to ReST")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: linux-doc@vger.kernel.org
Cc: Martin Schiller <ms@dev.tdt.de>
Cc: linux-x25@vger.kernel.org
Reviewed-by: Bagas Sanjaya <bagasdotme@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Bonding only supports setting peer_notif_delay with miimon set.
Fixes: 0307d589c4 ("bonding: add documentation for peer_notif_delay")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
SET_COALESCE may change operation mode and parameters in one call.
Changing operation mode may cause the driver to reset the parameter
values to what is a reasonable default for new operation mode.
Since driver does not know which parameters come from user and which
are echoed back from ->get, driver may ignore the parameters when
switching operation modes.
This used to be inevitable for ioctl() but in netlink we know which
parameters are actually specified by the user.
We could inform which parameters were set by the user but this would
lead to a lot of code duplication in the drivers. Instead try to call
the drivers twice if both mode and params are changed. The set method
already checks if any params need updating so in case the driver did
the right thing the first time around - there will be no second call
to it's ->set method (only an extra call to ->get()).
For mlx5 for example before this patch we'd see:
# ethtool -C eth0 adaptive-rx on adaptive-tx on
# ethtool -C eth0 adaptive-rx off adaptive-tx off \
tx-usecs 123 rx-usecs 123
Adaptive RX: off TX: off
rx-usecs: 3
rx-frames: 32
tx-usecs: 16
tx-frames: 32
[...]
After the change:
# ethtool -C eth0 adaptive-rx on adaptive-tx on
# ethtool -C eth0 adaptive-rx off adaptive-tx off \
tx-usecs 123 rx-usecs 123
Adaptive RX: off TX: off
rx-usecs: 123
rx-frames: 32
tx-usecs: 123
tx-frames: 32
[...]
This only works for netlink, so it's a small discrepancy between
netlink and ioctl(). Since we anticipate most users to move to
netlink I believe it's worth making their lives easier.
Link: https://lore.kernel.org/r/20230420233302.944382-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
If the rxrpc call set up by afs_make_call() receives an error whilst it is
transmitting the request, there's the possibility that it may get to the
point the rxrpc call is ended (after the error_kill_call label) just as the
call is queued for async processing.
This could manifest itself as call->rxcall being seen as NULL in
afs_deliver_to_call() when it tries to lock the call.
Fix this by splitting rxrpc_kernel_end_call() into a function to shut down
an rxrpc call and a function to release the caller's reference and calling
the latter only when we get to afs_put_call().
Reported-by: Jeffrey Altman <jaltman@auristor.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Tested-by: kafs-testing+fedora36_64checkkafs-build-306@auristor.com
cc: Marc Dionne <marc.dionne@auristor.com>
cc: "David S. Miller" <davem@davemloft.net>
cc: Eric Dumazet <edumazet@google.com>
cc: Jakub Kicinski <kuba@kernel.org>
cc: Paolo Abeni <pabeni@redhat.com>
cc: linux-afs@lists.infradead.org
cc: netdev@vger.kernel.org
Signed-off-by: David S. Miller <davem@davemloft.net>
1) Dragos Improves RX page pool, and provides some fixes to his previous series:
1.1) Fix releasing page_pool for striding RQ and legacy RQ nonlinear case
1.2) Hook NAPIs to page pools to gain more performance.
2) From Roi, Some cleanups to TC and eswitch modules.
3) Maher migrates vnic diagnostic counters reporting from debugfs to a
dedicated devlink health reporter
Maher Says:
===========
net/mlx5: Expose vnic diagnostic counters using devlink
Currently, vnic diagnostic counters are exposed through the following
debugfs:
$ ls /sys/kernel/debug/mlx5/0000:08:00.0/esw/vf_0/vnic_diag/
cq_overrun
quota_exceeded_command
total_q_under_processor_handle
invalid_command
send_queue_priority_update_flow
nic_receive_steering_discard
The current design does not allow the hypervisor to view the diagnostic
counters of its VFs, in case the VFs get bound to a VM. In other words,
the counters are not exposed for representor interfaces.
Furthermore, the debugfs design is inconvenient future-wise, in case more
counters need to be reported by the driver in the future.
As these counters pertain to vNIC health, it is more appropriate to
utilize the devlink health reporter to expose them.
Thus, this patchest includes the following changes:
* Drop the current vnic diagnostic counters debugfs interface.
* Add a vnic devlink health reporter for PFs/VFs core devices, which
when diagnosed will dump vnic diagnostic counter values that are
queried from FW.
* Add a vnic devlink health reporter for the representor interface, which
serves the same purpose listed in the previous point, in addition to
allowing the hypervisor to view its VFs diagnostic counters, even when
the VFs are bounded to external VMs.
Example of devlink health reporter usage is:
$devlink health diagnose pci/0000:08:00.0 reporter vnic
vNIC env counters:
total_error_queues: 0 send_queue_priority_update_flow: 0
comp_eq_overrun: 0 async_eq_overrun: 0 cq_overrun: 0
invalid_command: 0 quota_exceeded_command: 0
nic_receive_steering_discard: 0
===========
4) SW steering fixes and improvements
Yevgeny Kliteynik Says:
=======================
These short patch series are just small fixes / improvements for
SW steering:
- Patch 1: Fix dumping of legacy modify_hdr in debug dump to
align to what is expected by parser
- Patch 2: Have separate threshold for ICM sync per ICM type
- Patch 3: Add more info to the steering debug dump - Linux
version and device name
- Patch 4: Keep track of number of buddies that are currently
in use per domain per buddy type
=======================
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEGhZs6bAKwk/OTgTpSD+KveBX+j4FAmRB6HcACgkQSD+KveBX
+j4+nAf/cCJ7poDQQOp/Oug6H3xn/COYPv3Iasl0dhT8yu+LlNMQTF0bRrU4UpAQ
aIKcja2biOBAnD96EhA1nJoo9bJUTtKLokUDDyK/xRHS+wIyr8Lia6vxTz1yjj3C
jDqX3+ZP4rFuhAvh+92AT1I0JvS0g+ocokPVKmm+Pwf4y7sG69CZ7phVGSc0iFfT
y+gnP4C6cdIr7kNLByeeX6alDHL/q83vfNFWrugRPna2uXjcSR5Gtp03pJ0OVkI5
qHxG7Bz0BE/hcMYwNcNVTu/5e02+5PS6B8kN/ho5DkhVFhp+h17XWWvOMZxC3jfI
k0ijRSWocG1jIgRgkioBRgzXmc6nNw==
=jUe8
-----END PGP SIGNATURE-----
Merge tag 'mlx5-updates-2023-04-20' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux
Saeed Mahameed says:
====================
mlx5-updates-2023-04-20
1) Dragos Improves RX page pool, and provides some fixes to his previous
series:
1.1) Fix releasing page_pool for striding RQ and legacy RQ nonlinear case
1.2) Hook NAPIs to page pools to gain more performance.
2) From Roi, Some cleanups to TC and eswitch modules.
3) Maher migrates vnic diagnostic counters reporting from debugfs to a
dedicated devlink health reporter
Maher Says:
===========
net/mlx5: Expose vnic diagnostic counters using devlink
Currently, vnic diagnostic counters are exposed through the following
debugfs:
$ ls /sys/kernel/debug/mlx5/0000:08:00.0/esw/vf_0/vnic_diag/
cq_overrun
quota_exceeded_command
total_q_under_processor_handle
invalid_command
send_queue_priority_update_flow
nic_receive_steering_discard
The current design does not allow the hypervisor to view the diagnostic
counters of its VFs, in case the VFs get bound to a VM. In other words,
the counters are not exposed for representor interfaces.
Furthermore, the debugfs design is inconvenient future-wise, in case more
counters need to be reported by the driver in the future.
As these counters pertain to vNIC health, it is more appropriate to
utilize the devlink health reporter to expose them.
Thus, this patchest includes the following changes:
* Drop the current vnic diagnostic counters debugfs interface.
* Add a vnic devlink health reporter for PFs/VFs core devices, which
when diagnosed will dump vnic diagnostic counter values that are
queried from FW.
* Add a vnic devlink health reporter for the representor interface, which
serves the same purpose listed in the previous point, in addition to
allowing the hypervisor to view its VFs diagnostic counters, even when
the VFs are bounded to external VMs.
Example of devlink health reporter usage is:
$devlink health diagnose pci/0000:08:00.0 reporter vnic
vNIC env counters:
total_error_queues: 0 send_queue_priority_update_flow: 0
comp_eq_overrun: 0 async_eq_overrun: 0 cq_overrun: 0
invalid_command: 0 quota_exceeded_command: 0
nic_receive_steering_discard: 0
===========
4) SW steering fixes and improvements
Yevgeny Kliteynik Says:
=======================
These short patch series are just small fixes / improvements for
SW steering:
- Patch 1: Fix dumping of legacy modify_hdr in debug dump to
align to what is expected by parser
- Patch 2: Have separate threshold for ICM sync per ICM type
- Patch 3: Add more info to the steering debug dump - Linux
version and device name
- Patch 4: Keep track of number of buddies that are currently
in use per domain per buddy type
=======================
* tag 'mlx5-updates-2023-04-20' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux:
net/mlx5: Update op_mode to op_mod for port selection
net/mlx5: E-Switch, Remove unused mlx5_esw_offloads_vport_metadata_set()
net/mlx5: E-Switch, Remove redundant dev arg from mlx5_esw_vport_alloc()
net/mlx5: Include linux/pci.h for pci_msix_can_alloc_dyn()
net/mlx5e: RX, Hook NAPIs to page pools
net/mlx5e: RX, Fix XDP_TX page release for legacy rq nonlinear case
net/mlx5e: RX, Fix releasing page_pool pages twice for striding RQ
net/mlx5e: Add vnic devlink health reporter to representors
net/mlx5: Add vnic devlink health reporter to PFs/VFs
Revert "net/mlx5: Expose vnic diagnostic counters for eswitch managed vports"
Revert "net/mlx5: Expose steering dropped packets counter"
net/mlx5: DR, Add memory statistics for domain object
net/mlx5: DR, Add more info in domain dbg dump
net/mlx5: DR, Calculate sync threshold of each pool according to its type
net/mlx5: DR, Fix dumping of legacy modify_hdr in debug dump
====================
Link: https://lore.kernel.org/r/20230421013850.349646-1-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Remaining documentation and Kconfig hook for building the driver.
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add the devlink parameter switches so the user can enable
the features supported by the VFs. The only feature supported
at the moment is vDPA.
Example:
devlink dev param set pci/0000:2b:00.0 \
name enable_vnet cmode runtime value true
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add in the support for doing firmware updates. Of the two
main banks available, a and b, this updates the one not in
use and then selects it for the next boot.
Example:
devlink dev flash pci/0000:b2:00.0 \
file pensando/dsc_fw_1.63.0-22.tar
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Set up the basic adminq and notifyq queue structures. These are
used mostly by the client drivers for feature configuration.
These are essentially the same adminq and notifyq as in the
ionic driver.
Part of this includes querying for device identity and FW
information, so we can make that available to devlink dev info.
$ devlink dev info pci/0000:b5:00.0
pci/0000:b5:00.0:
driver pds_core
serial_number FLM18420073
versions:
fixed:
asic.id 0x0
asic.rev 0x0
running:
fw 1.51.0-73
stored:
fw.goldfw 1.15.9-C-22
fw.mainfwa 1.60.0-73
fw.mainfwb 1.60.0-57
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add devlink health reporting on top of our fw watchdog.
Example:
# devlink health show pci/0000:2b:00.0 reporter fw
pci/0000:2b:00.0:
reporter fw
state healthy error 0 recover 0
# devlink health diagnose pci/0000:2b:00.0 reporter fw
Status: healthy State: 1 Generation: 0 Recoveries: 0
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
This is the initial PCI driver framework for the new pds_core device
driver and its family of devices. This does the very basics of
registering for the new PF PCI device 1dd8:100c, setting up debugfs
entries, and registering with devlink.
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
ICMPv6 error packets are not sent to the anycast destinations and this
prevents things like traceroute from working. So create a setting similar
to ECHO when dealing with Anycast sources (icmpv6_echo_ignore_anycast).
Signed-off-by: Mahesh Bandewar <maheshb@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Reviewed-by: Maciej Żenczykowski <maze@google.com>
Link: https://lore.kernel.org/r/20230419013238.2691167-1-maheshb@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Create a new devlink health reporter for representor interface, which
reports the values of representor vnic diagnostic counters when diagnosed.
This patch will allow admins to monitor VF diagnostic counters through
the representor-interface vnic reporter.
Example of usage:
$ devlink health diagnose pci/0000:08:00.0/65537 reporter vnic
vNIC env counters:
total_error_queues: 0 send_queue_priority_update_flow: 0
comp_eq_overrun: 0 async_eq_overrun: 0 cq_overrun: 0
invalid_command: 0 quota_exceeded_command: 0
nic_receive_steering_discard: 0
Signed-off-by: Maher Sanalla <msanalla@nvidia.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Create a vnic devlink health reporter for PFs/VFs interfaces.
The reporter's diagnose callback displays the values of vNIC/vport
transport debug counters of PFs/VFs, as follows:
$ devlink health diagnose pci/0000:08:00.0 reporter vnic
vNIC env counters:
total_error_queues: 0 send_queue_priority_update_flow: 0
comp_eq_overrun: 0 async_eq_overrun: 0 cq_overrun: 0
invalid_command: 0 quota_exceeded_command: 0
nic_receive_steering_discard: 0
Moreover, add documentation on the reporter functionality and the
counters description.
While at it, expose the vNIC counters diagnose function to be used by
the downstream patch, which will reveal the counters for representor
interfaces.
Signed-off-by: Maher Sanalla <msanalla@nvidia.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
To enable kernel consumers of TLS to request a TLS handshake, add
support to net/handshake/ to request a handshake upcall.
This patch also acts as a template for adding handshake upcall
support for other kernel transport layer security providers.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Commit e523af4ee5 ("net/ice: Add support for enable_iwarp and enable_roce
devlink param") added support for the enable_roce and enable_iwarp
parameters in the ice driver. It didn't document these parameters in the
ice devlink documentation file. Add this documentation, including a note
about the mutual exclusion between the two modes.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Acked-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://lore.kernel.org/r/20230414162614.571861-1-jacob.e.keller@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Recent patches to mlx5 mentioned a regression when moving from
driver local page pool to only using the generic page pool code.
Page pool has two recycling paths (1) direct one, which runs in
safe NAPI context (basically consumer context, so producing
can be lockless); and (2) via a ptr_ring, which takes a spin
lock because the freeing can happen from any CPU; producer
and consumer may run concurrently.
Since the page pool code was added, Eric introduced a revised version
of deferred skb freeing. TCP skbs are now usually returned to the CPU
which allocated them, and freed in softirq context. This places the
freeing (producing of pages back to the pool) enticingly close to
the allocation (consumer).
If we can prove that we're freeing in the same softirq context in which
the consumer NAPI will run - lockless use of the cache is perfectly fine,
no need for the lock.
Let drivers link the page pool to a NAPI instance. If the NAPI instance
is scheduled on the same CPU on which we're freeing - place the pages
in the direct cache.
With that and patched bnxt (XDP enabled to engage the page pool, sigh,
bnxt really needs page pool work :() I see a 2.6% perf boost with
a TCP stream test (app on a different physical core than softirq).
The CPU use of relevant functions decreases as expected:
page_pool_refill_alloc_cache 1.17% -> 0%
_raw_spin_lock 2.41% -> 0.98%
Only consider lockless path to be safe when NAPI is scheduled
- in practice this should cover majority if not all of steady state
workloads. It's usually the NAPI kicking in that causes the skb flush.
The main case we'll miss out on is when application runs on the same
CPU as NAPI. In that case we don't use the deferred skb free path.
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>
Tested-by: Dragos Tatulea <dtatulea@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The sample code talks about single-queue devices and uses locks.
Update it to something resembling more modern code.
Make sure we mention use of READ_ONCE() / WRITE_ONCE().
Change the comment which talked about consumer on the xmit side.
AFAIU xmit is the producer and completions are a consumer.
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
A lot of drivers follow the same scheme to stop / start queues
without introducing locks between xmit and NAPI tx completions.
I'm guessing they all copy'n'paste each other's code.
The original code dates back all the way to e1000 and Linux 2.6.19.
Smaller drivers shy away from the scheme and introduce a lock
which may cause deadlocks in netpoll.
Provide macros which encapsulate the necessary logic.
The macros do not prevent false wake ups, the extra barrier
required to close that race is not worth it. See discussion in:
https://lore.kernel.org/all/c39312a2-4537-14b4-270c-9fe1fbb91e89@gmail.com/
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Somehow it feels more right to start from the probe then open,
then tx... Much like the lifetime of the driver itself.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
driver.rst had a historical form of list of common problems.
In the age os Sphinx and rendered documentation it's better
to use the more usual title + text format.
This will allow us to render kdoc into the output more naturally.
No changes to the actual text.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
UBSAN: shift-out-of-bounds in net/ipv4/tcp_input.c:555:23
shift exponent 255 is too large for 32-bit type 'int'
CPU: 1 PID: 7907 Comm: ssh Not tainted 6.3.0-rc4-00161-g62bad54b26db-dirty #206
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014
Call Trace:
<TASK>
dump_stack_lvl+0x136/0x150
__ubsan_handle_shift_out_of_bounds+0x21f/0x5a0
tcp_init_transfer.cold+0x3a/0xb9
tcp_finish_connect+0x1d0/0x620
tcp_rcv_state_process+0xd78/0x4d60
tcp_v4_do_rcv+0x33d/0x9d0
__release_sock+0x133/0x3b0
release_sock+0x58/0x1b0
'maxwin' is int, shifting int for 32 or more bits is undefined behaviour.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The out-of-tree driver is hosted on SourceForge, as this does not apply
to the kernel driver remove references to it. Also do some minor
formatting changes around this section.
Suggested-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Update the email address for support to use Intel Wired LAN, the mailing
list used for kernel development.
Suggested-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
The recycle parameter used during page release is no longer
necessary: the page pool can detect when the page cannot be
recycled to the cache or ring without any outside hint.
The page pool will also take care of cleaning up after itself
once all the inflight pages have been released. So no need to
explicitly release pages to the system.
Remove the internal page_cache stats as the mlx5e_page_cache
struct no longer exists.
Delete the documentation entries along with the stats.
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
This attribute, which is part of ethtool's ring param configuration
allows the user to specify the maximum number of the packet's payload
that can be written directly to the device.
Example usage:
# ethtool -G [interface] tx-push-buf-len [number of bytes]
Co-developed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Shay Agroskin <shayagr@amazon.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add basic documentation about NAPI. We can stop linking to the ancient
doc on the LF wiki.
Link: https://lore.kernel.org/all/20230315223044.471002-1-kuba@kernel.org/
Reviewed-by: Bagas Sanjaya <bagasdotme@gmail.com>
Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com>
Acked-by: Pavel Pisa <pisa@cmp.felk.cvut.cz> # for ctucanfd-driver.rst
Reviewed-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Stephen Hemminger <stephen@networkplumber.org>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://lore.kernel.org/r/20230322053848.198452-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When driver doesn't implement a bpf_xdp_metadata kfunc the fallback
implementation returns EOPNOTSUPP, which indicate device driver doesn't
implement this kfunc.
Currently many drivers also return EOPNOTSUPP when the hint isn't
available, which is ambiguous from an API point of view. Instead
change drivers to return ENODATA in these cases.
There can be natural cases why a driver doesn't provide any hardware
info for a specific hint, even on a frame to frame basis (e.g. PTP).
Lets keep these cases as separate return codes.
When describing the return values, adjust the function kernel-doc layout
to get proper rendering for the return values.
Fixes: ab46182d0d ("net/mlx4_en: Support RX XDP metadata")
Fixes: bc8d405b1b ("net/mlx5e: Support RX XDP metadata")
Fixes: 306531f024 ("veth: Support RX XDP metadata")
Fixes: 3d76a4d3d4 ("bpf: XDP metadata RX kfuncs")
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Acked-by: Stanislav Fomichev <sdf@google.com>
Acked-by: Toke Høiland-Jørgensen <toke@redhat.com>
Acked-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://lore.kernel.org/r/167940675120.2718408.8176058626864184420.stgit@firesoul
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
There are likely no users of this driver as the hardware has been
discontinued since 2010. Remove the driver and all references to it
in documentation.
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Acked-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
We refer to a TC NIC rule that involves forwarding as "hairpin".
Hairpin queues are mlx5 hardware specific implementation for hardware
forwarding of such packets.
Per the discussion in [1], move the hairpin queues control (number and
size) from debugfs to devlink.
Expose two devlink params:
- hairpin_num_queues: control the number of hairpin queues
- hairpin_queue_size: control the size (in packets) of the hairpin queues
[1] https://lore.kernel.org/all/20230111194608.7f15b9a1@kernel.org/
Signed-off-by: Gal Pressman <gal@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Link: https://lore.kernel.org/r/20230314054234.267365-12-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Current release - regressions:
- phy: multiple fixes for EEE rework
- wifi: wext: warn about usage only once
- wifi: ath11k: allow system suspend to survive ath11k
Current release - new code bugs:
- mlx5: Fix memory leak in IPsec RoCE creation
- ibmvnic: assign XPS map to correct queue index
Previous releases - regressions:
- netfilter: ip6t_rpfilter: Fix regression with VRF interfaces
- netfilter: ctnetlink: make event listener tracking global
- nf_tables: allow to fetch set elements when table has an owner
- mlx5:
- fix skb leak while fifo resync and push
- fix possible ptp queue fifo use-after-free
Previous releases - always broken:
- sched: fix action bind logic
- ptp: vclock: use mutex to fix "sleep on atomic" bug if driver
also uses a mutex
- netfilter: conntrack: fix rmmod double-free race
- netfilter: xt_length: use skb len to match in length_mt6,
avoid issues with BIG TCP
Misc:
- ice: remove unnecessary CONFIG_ICE_GNSS
- mlx5e: remove hairpin write debugfs files
- sched: act_api: move TCA_EXT_WARN_MSG to the correct hierarchy
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=Ko4p
-----END PGP SIGNATURE-----
Merge tag 'net-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from wireless and netfilter.
The notable fixes here are the EEE fix which restores boot for many
embedded platforms (real and QEMU); WiFi warning suppression and the
ICE Kconfig cleanup.
Current release - regressions:
- phy: multiple fixes for EEE rework
- wifi: wext: warn about usage only once
- wifi: ath11k: allow system suspend to survive ath11k
Current release - new code bugs:
- mlx5: Fix memory leak in IPsec RoCE creation
- ibmvnic: assign XPS map to correct queue index
Previous releases - regressions:
- netfilter: ip6t_rpfilter: Fix regression with VRF interfaces
- netfilter: ctnetlink: make event listener tracking global
- nf_tables: allow to fetch set elements when table has an owner
- mlx5:
- fix skb leak while fifo resync and push
- fix possible ptp queue fifo use-after-free
Previous releases - always broken:
- sched: fix action bind logic
- ptp: vclock: use mutex to fix "sleep on atomic" bug if driver also
uses a mutex
- netfilter: conntrack: fix rmmod double-free race
- netfilter: xt_length: use skb len to match in length_mt6, avoid
issues with BIG TCP
Misc:
- ice: remove unnecessary CONFIG_ICE_GNSS
- mlx5e: remove hairpin write debugfs files
- sched: act_api: move TCA_EXT_WARN_MSG to the correct hierarchy"
* tag 'net-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (53 commits)
tcp: tcp_check_req() can be called from process context
net: phy: c45: fix network interface initialization failures on xtensa, arm:cubieboard
xen-netback: remove unused variables pending_idx and index
net/sched: act_api: move TCA_EXT_WARN_MSG to the correct hierarchy
net: dsa: ocelot_ext: remove unnecessary phylink.h include
net: mscc: ocelot: fix duplicate driver name error
net: dsa: felix: fix internal MDIO controller resource length
net: dsa: seville: ignore mscc-miim read errors from Lynx PCS
net/sched: act_sample: fix action bind logic
net/sched: act_mpls: fix action bind logic
net/sched: act_pedit: fix action bind logic
wifi: wext: warn about usage only once
wifi: mt76: usb: fix use-after-free in mt76u_free_rx_queue
qede: avoid uninitialized entries in coal_entry array
nfc: fix memory leak of se_io context in nfc_genl_se_io
ice: remove unnecessary CONFIG_ICE_GNSS
net/sched: cls_api: Move call to tcf_exts_miss_cookie_base_destroy()
ibmvnic: Assign XPS map to correct queue index
docs: net: fix inaccuracies in msg_zerocopy.rst
tools: net: add __pycache__ to gitignore
...
Replace "sendpage" with "sendfile". Remove comment about
ENOBUFS when the sockopt hasn't been set; experimentation
indicates that this is not true.
Signed-off-by: nick black <dankamongmen@gmail.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/r/Y/gg/EhIIjugLdd3@schwarzgerat.orthanc
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
changes include:
- Some significant additions to the memory-management documentation
- Some improvements to navigation in the HTML-rendered docs
- More Spanish and Chinese translations
...and the usual set of typo fixes and such.
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEIw+MvkEiF49krdp9F0NaE2wMflgFAmPzkQUPHGNvcmJldEBs
d24ubmV0AAoJEBdDWhNsDH5YC0QH/09u10xV3N+RuveNE/tArVxKcQi7JZd/xugQ
toSXygh64WY10lzwi7Ms1bHZzpPYB0fOrqTGNqNQuhrVTjQzaZB0BBJqm8lwt2w/
S/Z5wj+IicJTmQ7+0C2Hc/dcK5SCPfY3CgwqOUVdr3dEm1oU+4QaBy31fuIJJ0Hx
NdbXBco8BZqJX9P67jwp9vbrFrSGBjPI0U4HNHVjrWlcBy8JT0aAnf0fyWFy3orA
T86EzmEw8drA1mXsHa5pmVwuHDx2X+D+eRurG9llCBrlIG9EDSmnalY4BeGqR4LS
oDrEH6M91I5+9iWoJ0rBheD8rPclXO2HpjXLApXzTjrORgEYZsM=
=MCdX
-----END PGP SIGNATURE-----
Merge tag 'docs-6.3' of git://git.lwn.net/linux
Pull documentation updates from Jonathan Corbet:
"It has been a moderately calm cycle for documentation; the significant
changes include:
- Some significant additions to the memory-management documentation
- Some improvements to navigation in the HTML-rendered docs
- More Spanish and Chinese translations
... and the usual set of typo fixes and such"
* tag 'docs-6.3' of git://git.lwn.net/linux: (68 commits)
Documentation/watchdog/hpwdt: Fix Format
Documentation/watchdog/hpwdt: Fix Reference
Documentation: core-api: padata: correct spelling
docs/mm: Physical Memory: correct spelling in reference to CONFIG_PAGE_EXTENSION
docs: Use HTML comments for the kernel-toc SPDX line
docs: Add more information to the HTML sidebar
Documentation: KVM: Update AMD memory encryption link
printk: Document that CONFIG_BOOT_PRINTK_DELAY required for boot_delay=
Documentation: userspace-api: correct spelling
Documentation: sparc: correct spelling
Documentation: driver-api: correct spelling
Documentation: admin-guide: correct spelling
docs: add workload-tracing document to admin-guide
docs/admin-guide/mm: remove useless markup
docs/mm: remove useless markup
docs/mm: Physical Memory: remove useless markup
docs/sp_SP: Add process magic-number translation
docs: ftrace: always use canonical ftrace path
Doc/damon: fix the data path error
dma-buf: Add "dma-buf" to title of documentation
...
Add devlink info support for ef100. The information reported is obtained
through the MCDI interface with the specific meaning defined in new
documentation file.
Signed-off-by: Alejandro Lucero <alejandro.lucero-palau@amd.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Acked-by: Martin Habets <habetsm.xilinx@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
1) From Roi and Mark: MultiPort eswitch support
MultiPort E-Switch builds on newer hardware's capabilities and introduces
a mode where a single E-Switch is used and all the vports and physical
ports on the NIC are connected to it.
The new mode will allow in the future a decrease in the memory used by the
driver and advanced features that aren't possible today.
This represents a big change in the current E-Switch implantation in mlx5.
Currently, by default, each E-Switch manager manages its E-Switch.
Steering rules in each E-Switch can only forward traffic to the native
physical port associated with that E-Switch. While there are ways to target
non-native physical ports, for example using a bond or via special TC
rules. None of the ways allows a user to configure the driver
to operate by default in such a mode nor can the driver decide
to move to this mode by default as it's user configuration-driven right now.
While MultiPort E-Switch single FDB mode is the preferred mode, older
generations of ConnectX hardware couldn't support this mode so it was never
implemented. Now that there is capable hardware present, start the
transition to having this mode by default.
Introduce a devlink parameter to control MultiPort Eswitch single FDB mode.
This will allow users to select this mode on their system right now
and in the future will allow the driver to move to this mode by default.
2) From Jiri: Improvements and fixes for mlx5 netdev's devlink logic
2.1) Cleanups related to mlx5's devlink port logic
2.2) Move devlink port registration to be done before netdev alloc
2.3) Create auxdev devlink instance in the same ns as parent devlink
2.4) Suspend auxiliary devices only in case of PCI device suspend
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEGhZs6bAKwk/OTgTpSD+KveBX+j4FAmPsBlsACgkQSD+KveBX
+j6izAgAtvzimjzOqI8J0FKPW3piRH3VtNWUrlGAf4HHPI0lZMbEV5GIaSI15JeH
wrIpNXKzaA+6+NZ7TzTwqVO+zyKCQVpRw7xPANIJ2A5dId36jU2AgW06zgzFuYWa
mXKG8rAUls6E5a5DHTaY/SueWMO9KMOfLzHFXHNsLAKTAw+FoDdlGso5vgvsy44g
2/N/kDBdzC5n8og934sM7JymthnTVyuGe/Au2w1UUR1MMZ46OQgmhStDwqS5MrzI
pIi+tWFG9YFM5/J8d13y7X/xMCq26Aw6SZSUhsRfTk0goy0uKaU6yYm8vSbO0mci
+e0c8bpWL/MzAhMzWj8CwBPeO6knOw==
=tYc2
-----END PGP SIGNATURE-----
Merge tag 'mlx5-updates-2023-02-10' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux
Saeed Mahameed says:
====================
mlx5-updates-2023-02-10
1) From Roi and Mark: MultiPort eswitch support
MultiPort E-Switch builds on newer hardware's capabilities and introduces
a mode where a single E-Switch is used and all the vports and physical
ports on the NIC are connected to it.
The new mode will allow in the future a decrease in the memory used by the
driver and advanced features that aren't possible today.
This represents a big change in the current E-Switch implantation in mlx5.
Currently, by default, each E-Switch manager manages its E-Switch.
Steering rules in each E-Switch can only forward traffic to the native
physical port associated with that E-Switch. While there are ways to target
non-native physical ports, for example using a bond or via special TC
rules. None of the ways allows a user to configure the driver
to operate by default in such a mode nor can the driver decide
to move to this mode by default as it's user configuration-driven right now.
While MultiPort E-Switch single FDB mode is the preferred mode, older
generations of ConnectX hardware couldn't support this mode so it was never
implemented. Now that there is capable hardware present, start the
transition to having this mode by default.
Introduce a devlink parameter to control MultiPort Eswitch single FDB mode.
This will allow users to select this mode on their system right now
and in the future will allow the driver to move to this mode by default.
2) From Jiri: Improvements and fixes for mlx5 netdev's devlink logic
2.1) Cleanups related to mlx5's devlink port logic
2.2) Move devlink port registration to be done before netdev alloc
2.3) Create auxdev devlink instance in the same ns as parent devlink
2.4) Suspend auxiliary devices only in case of PCI device suspend
* tag 'mlx5-updates-2023-02-10' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux:
net/mlx5: Suspend auxiliary devices only in case of PCI device suspend
net/mlx5: Remove "recovery" arg from mlx5_load_one() function
net/mlx5e: Create auxdev devlink instance in the same ns as parent devlink
net/mlx5e: Move devlink port registration to be done before netdev alloc
net/mlx5e: Move dl_port to struct mlx5e_dev
net/mlx5e: Replace usage of mlx5e_devlink_get_dl_port() by netdev->devlink_port
net/mlx5e: Pass mdev to mlx5e_devlink_port_register()
net/mlx5: Remove outdated comment
net/mlx5e: TC, Remove redundant parse_attr argument
net/mlx5e: Use a simpler comparison for uplink rep
net/mlx5: Lag, Add single RDMA device in multiport mode
net/mlx5: Lag, set different uplink vport metadata in multiport eswitch mode
net/mlx5: E-Switch, rename bond update function to be reused
net/mlx5e: TC, Add peer flow in mpesw mode
net/mlx5: Lag, Control MultiPort E-Switch single FDB mode
====================
Link: https://lore.kernel.org/r/20230214221239.159033-1-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Update devlink-health.rst file:
- Add devlink formatted message (fmsg) API documentation.
- Add auto-dump as a condition to do dump once error reported.
- Expand OOB to clarify this acronym.
Signed-off-by: Moshe Shemesh <moshe@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
MultiPort E-Switch builds on newer hardware's capabilities and introduces
a mode where a single E-Switch is used and all the vports and physical
ports on the NIC are connected to it.
The new mode will allow in the future a decrease in the memory used by the
driver and advanced features that aren't possible today.
This represents a big change in the current E-Switch implantation in mlx5.
Currently, by default, each E-Switch manager manages its E-Switch.
Steering rules in each E-Switch can only forward traffic to the native
physical port associated with that E-Switch. While there are ways to target
non-native physical ports, for example using a bond or via special TC
rules. None of the ways allows a user to configure the driver
to operate by default in such a mode nor can the driver decide
to move to this mode by default as it's user configuration-driven right now.
While MultiPort E-Switch single FDB mode is the preferred mode, older
generations of ConnectX hardware couldn't support this mode so it was never
implemented. Now that there is capable hardware present, start the
transition to having this mode by default.
Introduce a devlink parameter to control MultiPort E-Switch single FDB mode.
This will allow users to select this mode on their system right now
and in the future will allow the driver to move to this mode by default.
Example:
$ devlink dev param set pci/0000:00:0b.0 name esw_multiport value 1 \
cmode runtime
Signed-off-by: Roi Dayan <roid@nvidia.com>
Reviewed-by: Maor Dickman <maord@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Similar to what was done for TX_PUSH, add an RX_PUSH concept
to the ethtool interfaces.
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Some mlx5 devices are capable of disabling RoCE. In this situation,
disablement does not need to be handled at the driver level.
Signed-off-by: Rahul Rameshbabu <rrameshbabu@nvidia.com>
Reviewed-by: Shay Drory <shayd@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Update rst file to contain general information about statistics counters
for the mlx5 driver. Add specifics about individual counters in list
tables.
Signed-off-by: Rahul Rameshbabu <rrameshbabu@nvidia.com>
Reviewed-by: Gal Pressman <gal@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Tracepoints were previously implemented but not documented till this patch
series.
Signed-off-by: Rahul Rameshbabu <rrameshbabu@nvidia.com>
Reviewed-by: Gal Pressman <gal@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Provide information for Kconfig flags defined but not documented till this
patch series for the mlx5 driver.
Signed-off-by: Rahul Rameshbabu <rrameshbabu@nvidia.com>
Reviewed-by: Gal Pressman <gal@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
The mlx5 device driver documentation page has grown in size and should be
split into multiple subpages. This change also contains a table of contents
for these new subpages.
Signed-off-by: Rahul Rameshbabu <rrameshbabu@nvidia.com>
Reviewed-by: Gal Pressman <gal@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
When set to zero, the neighbor sysctl proxy_delay value
does not cause an immediate reply for ARP/ND requests
as expected, it instead causes a random delay between
[0, U32_MAX). Looking at this comment from
__get_random_u32_below() explains the reason:
/*
* This function is technically undefined for ceil == 0, and in fact
* for the non-underscored constant version in the header, we build bug
* on that. But for the non-constant case, it's convenient to have that
* evaluate to being a straight call to get_random_u32(), so that
* get_random_u32_inclusive() can work over its whole range without
* undefined behavior.
*/
Added helper function that does not call get_random_u32_below()
if proxy_delay is zero and just uses the current value of
jiffies instead, causing pneigh_enqueue() to respond
immediately.
Also added definition of proxy_delay to ip-sysctl.txt since
it was missing.
Signed-off-by: Brian Haley <haleyb.dev@gmail.com>
Link: https://lore.kernel.org/r/20230130171428.367111-1-haleyb.dev@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The canonical location for the tracefs filesystem is at /sys/kernel/tracing.
But, from Documentation/trace/ftrace.rst:
Before 4.1, all ftrace tracing control files were within the debugfs
file system, which is typically located at /sys/kernel/debug/tracing.
For backward compatibility, when mounting the debugfs file system,
the tracefs file system will be automatically mounted at:
/sys/kernel/debug/tracing
Many parts of Documentation still reference this older debugfs path, so
let's update them to avoid confusion.
Signed-off-by: Ross Zwisler <zwisler@google.com>
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Link: https://lore.kernel.org/r/20230125213251.2013791-1-zwisler@google.com
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Correct spelling problems for Documentation/networking/ as reported
by codespell.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: linux-doc@vger.kernel.org
Cc: Jiri Pirko <jiri@nvidia.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: netdev@vger.kernel.org
Link: https://lore.kernel.org/r/20230129231053.20863-5-rdunlap@infradead.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
- bump version strings, by Simon Wunderlich
- drop prandom.h includes, by Sven Eckelmann
- fix mailing list address, by Sven Eckelmann
- multicast feature preparation, by Linus Lüssing (2 patches)
-----BEGIN PGP SIGNATURE-----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=yGYm
-----END PGP SIGNATURE-----
Merge tag 'batadv-next-pullrequest-20230127' of git://git.open-mesh.org/linux-merge
Simon Wunderlich says:
====================
This feature/cleanup patchset includes the following patches:
- bump version strings, by Simon Wunderlich
- drop prandom.h includes, by Sven Eckelmann
- fix mailing list address, by Sven Eckelmann
- multicast feature preparation, by Linus Lüssing (2 patches)
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTFp0I1jqZrAX+hPRXbK58LschIgwUCY9RqJgAKCRDbK58LschI
gw2IAP9G5uhFO5abBzYLupp6SY3T5j97MUvPwLfFqUEt7EXmuwEA2lCUEWeW0KtR
QX+QmzCa6iHxrW7WzP4DUYLue//FJQY=
=yYqA
-----END PGP SIGNATURE-----
Merge tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Daniel Borkmann says:
====================
bpf-next 2023-01-28
We've added 124 non-merge commits during the last 22 day(s) which contain
a total of 124 files changed, 6386 insertions(+), 1827 deletions(-).
The main changes are:
1) Implement XDP hints via kfuncs with initial support for RX hash and
timestamp metadata kfuncs, from Stanislav Fomichev and
Toke Høiland-Jørgensen.
Measurements on overhead: https://lore.kernel.org/bpf/875yellcx6.fsf@toke.dk
2) Extend libbpf's bpf_tracing.h support for tracing arguments of
kprobes/uprobes and syscall as a special case, from Andrii Nakryiko.
3) Significantly reduce the search time for module symbols by livepatch
and BPF, from Jiri Olsa and Zhen Lei.
4) Enable cpumasks to be used as kptrs, which is useful for tracing
programs tracking which tasks end up running on which CPUs
in different time intervals, from David Vernet.
5) Fix several issues in the dynptr processing such as stack slot liveness
propagation, missing checks for PTR_TO_STACK variable offset, etc,
from Kumar Kartikeya Dwivedi.
6) Various performance improvements, fixes, and introduction of more
than just one XDP program to XSK selftests, from Magnus Karlsson.
7) Big batch to BPF samples to reduce deprecated functionality,
from Daniel T. Lee.
8) Enable struct_ops programs to be sleepable in verifier,
from David Vernet.
9) Reduce pr_warn() noise on BTF mismatches when they are expected under
the CONFIG_MODULE_ALLOW_BTF_MISMATCH config anyway, from Connor O'Brien.
10) Describe modulo and division by zero behavior of the BPF runtime
in BPF's instruction specification document, from Dave Thaler.
11) Several improvements to libbpf API documentation in libbpf.h,
from Grant Seltzer.
12) Improve resolve_btfids header dependencies related to subcmd and add
proper support for HOSTCC, from Ian Rogers.
13) Add ipip6 and ip6ip decapsulation support for bpf_skb_adjust_room()
helper along with BPF selftests, from Ziyang Xuan.
14) Simplify the parsing logic of structure parameters for BPF trampoline
in the x86-64 JIT compiler, from Pu Lehui.
15) Get BTF working for kernels with CONFIG_RUST enabled by excluding
Rust compilation units with pahole, from Martin Rodriguez Reboredo.
16) Get bpf_setsockopt() working for kTLS on top of TCP sockets,
from Kui-Feng Lee.
17) Disable stack protection for BPF objects in bpftool given BPF backends
don't support it, from Holger Hoffstätte.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (124 commits)
selftest/bpf: Make crashes more debuggable in test_progs
libbpf: Add documentation to map pinning API functions
libbpf: Fix malformed documentation formatting
selftests/bpf: Properly enable hwtstamp in xdp_hw_metadata
selftests/bpf: Calls bpf_setsockopt() on a ktls enabled socket.
bpf: Check the protocol of a sock to agree the calls to bpf_setsockopt().
bpf/selftests: Verify struct_ops prog sleepable behavior
bpf: Pass const struct bpf_prog * to .check_member
libbpf: Support sleepable struct_ops.s section
bpf: Allow BPF_PROG_TYPE_STRUCT_OPS programs to be sleepable
selftests/bpf: Fix vmtest static compilation error
tools/resolve_btfids: Alter how HOSTCC is forced
tools/resolve_btfids: Install subcmd headers
bpf/docs: Document the nocast aliasing behavior of ___init
bpf/docs: Document how nested trusted fields may be defined
bpf/docs: Document cpumask kfuncs in a new file
selftests/bpf: Add selftest suite for cpumask kfuncs
selftests/bpf: Add nested trust selftests suite
bpf: Enable cpumasks to be queried and used as kptrs
bpf: Disallow NULLable pointers for trusted kfuncs
...
====================
Link: https://lore.kernel.org/r/20230128004827.21371-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Current link for NAPI documentation in ice driver doesn't work - it
returns 404. Update the link to the working one.
Signed-off-by: Michal Wilczynski <michal.wilczynski@intel.com>
Acked-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Almost all validation logic is in the drivers, but they are
missing reliable way to convey failure reason to userspace
applications.
Let's use extack to return this information to users.
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Almost all validation logic is in the drivers, but they are
missing reliable way to convey failure reason to userspace
applications.
Let's use extack to return this information to users.
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
An SCTP endpoint can start an association through a path and tear it
down over another one. That means the initial path will not see the
shutdown sequence, and the conntrack entry will remain in ESTABLISHED
state for 5 days.
By merging the HEARTBEAT_ACKED and ESTABLISHED states into one
ESTABLISHED state, there remains no difference between a primary or
secondary path. The timeout for the merged ESTABLISHED state is set to
210 seconds (hb_interval * max_path_retrans + rto_max). So, even if a
path doesn't see the shutdown sequence, it will expire in a reasonable
amount of time.
With this change in place, there is now more than one state from which
we can transition to ESTABLISHED, COOKIE_ECHOED and HEARTBEAT_SENT, so
handle the setting of ASSURED bit whenever a state change has happened
and the new state is ESTABLISHED. Removed the check for dir==REPLY since
the transition to ESTABLISHED can happen only in the reply direction.
Fixes: 9fb9cbb108 ("[NETFILTER]: Add nf_conntrack subsystem.")
Signed-off-by: Sriram Yagnaraman <sriram.yagnaraman@est.tech>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Document all current use-cases and assumptions.
Cc: John Fastabend <john.fastabend@gmail.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Martin KaFai Lau <martin.lau@linux.dev>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Willem de Bruijn <willemb@google.com>
Cc: Jesper Dangaard Brouer <brouer@redhat.com>
Cc: Anatoly Burakov <anatoly.burakov@intel.com>
Cc: Alexander Lobakin <alexandr.lobakin@intel.com>
Cc: Magnus Karlsson <magnus.karlsson@gmail.com>
Cc: Maryam Tahhan <mtahhan@redhat.com>
Cc: xdp-hints@xdp-project.net
Cc: netdev@vger.kernel.org
Acked-by: David Vernet <void@manifault.com>
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Link: https://lore.kernel.org/r/20230119221536.3349901-2-sdf@google.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Two new netlink attributes were added to PAUSE_GET and STATS_GET and
their replies. Document them.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Show details about the structures passed back and forth related to MAC
Merge layer configuration, state and statistics. The rendered htmldocs
will be much more verbose due to the kerneldoc references.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Previously support for GNSS was implemented as a TTY driver, it allowed
to access GNSS receiver on /dev/ttyGNSS_<bus><func>.
Use generic GNSS subsystem API instead of implementing own TTY driver.
The receiver is accessible on /dev/gnss<id>. In case of multiple receivers
in the OS, correct device can be found by enumerating either:
- /sys/class/net/<eth port>/device/gnss/
- /sys/class/gnss/gnss<id>/device/
Using GNSS subsystem is superior to implementing own TTY driver, as the
GNSS subsystem was designed solely for this purpose. It also implements
TTY driver but in a common and defined way.
From user perspective, there is no difference in communicating with a
device, except new path to the device shall be used. The device will
provide same information to the userspace as the old one, and can be used
in the same way, i.e.:
old # gpsmon /dev/ttyGNSS_2100_0
new # gpsmon /dev/gnss0
There is no other impact on userspace tools.
User expecting onboard GNSS receiver support is required to enable
CONFIG_GNSS=y/m in kernel config.
Reviewed-by: Alexander Lobakin <alexandr.lobakin@intel.com>
Signed-off-by: Karol Kolacinski <karol.kolacinski@intel.com>
Signed-off-by: Michal Michalik <michal.michalik@intel.com>
Signed-off-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>
Tested-by: Gurucharan G <gurucharanx.g@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add the following ethtool tx aggregation parameters:
ETHTOOL_A_COALESCE_TX_AGGR_MAX_BYTES
Maximum size in bytes of a tx aggregated block of frames.
ETHTOOL_A_COALESCE_TX_AGGR_MAX_FRAMES
Maximum number of frames that can be aggregated into a block.
ETHTOOL_A_COALESCE_TX_AGGR_TIME_USECS
Time in usecs after the first packet arrival in an aggregated
block for the block to be sent.
Signed-off-by: Daniele Palmas <dnlplm@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add support for configuring the PLCA Reconciliation Sublayer on
multi-drop PHYs that support IEEE802.3cg-2019 Clause 148 (e.g.,
10BASE-T1S). This patch adds the appropriate netlink interface
to ethtool.
Signed-off-by: Piergiorgio Beruto <piergiorgio.beruto@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Move all the call state changes that are made in rxrpc_sendmsg() to the I/O
thread. This is a step towards removing the call state lock.
This requires the switch to the RXRPC_CALL_CLIENT_AWAIT_REPLY and
RXRPC_CALL_SERVER_SEND_REPLY states to be done when the last packet is
decanted from ->tx_sendmsg to ->tx_buffer in the I/O thread, not when it is
added to ->tx_sendmsg by sendmsg().
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
toc entry is missing for etas_es58x devlink doc and triggers this warning:
Documentation/networking/devlink/etas_es58x.rst: WARNING: document isn't included in any toctree
Add the missing toc entry.
Fixes: 9f63f96aac ("Documentation: devlink: add devlink documentation for the etas_es58x driver")
Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Link: https://lore.kernel.org/all/20221213051136.721887-1-mailhol.vincent@wanadoo.fr
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Pablo Neira Ayuso says:
====================
Netfilter/IPVS fixes for net
1) Fix NAT IPv6 flowtable hardware offload, from Qingfang DENG.
2) Add a safety check to IPVS socket option interface report a
warning if unsupported command is seen, this. From Li Qiong.
3) Document SCTP conntrack timeouts, from Sriram Yagnaraman.
* git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
netfilter: conntrack: document sctp timeouts
ipvs: add a 'default' case in do_ip_vs_set_ctl()
netfilter: flowtable: really fix NAT IPv6 offload
====================
Link: https://lore.kernel.org/r/20221213140923.154594-1-pablo@netfilter.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Exposed through sysctl, update documentation to describe sctp states and
their default timeouts.
Signed-off-by: Sriram Yagnaraman <sriram.yagnaraman@est.tech>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Pablo Neira Ayuso says:
====================
Netfilter/IPVS updates for net-next
1) Incorrect error check in nft_expr_inner_parse(), from Dan Carpenter.
2) Add DATA_SENT state to SCTP connection tracking helper, from
Sriram Yagnaraman.
3) Consolidate nf_confirm for ipv4 and ipv6, from Florian Westphal.
4) Add bitmask support for ipset, from Vishwanath Pai.
5) Handle icmpv6 redirects as RELATED, from Florian Westphal.
6) Add WARN_ON_ONCE() to impossible case in flowtable datapath,
from Li Qiong.
7) A large batch of IPVS updates to replace timer-based estimators by
kthreads to scale up wrt. CPUs and workload (millions of estimators).
Julian Anastasov says:
This patchset implements stats estimation in kthread context.
It replaces the code that runs on single CPU in timer context every 2
seconds and causing latency splats as shown in reports [1], [2], [3].
The solution targets setups with thousands of IPVS services,
destinations and multi-CPU boxes.
Spread the estimation on multiple (configured) CPUs and multiple
time slots (timer ticks) by using multiple chains organized under RCU
rules. When stats are not needed, it is recommended to use
run_estimation=0 as already implemented before this change.
RCU Locking:
- As stats are now RCU-locked, tot_stats, svc and dest which
hold estimator structures are now always freed from RCU
callback. This ensures RCU grace period after the
ip_vs_stop_estimator() call.
Kthread data:
- every kthread works over its own data structure and all
such structures are attached to array. For now we limit
kthreads depending on the number of CPUs.
- even while there can be a kthread structure, its task
may not be running, eg. before first service is added or
while the sysctl var is set to an empty cpulist or
when run_estimation is set to 0 to disable the estimation.
- the allocated kthread context may grow from 1 to 50
allocated structures for timer ticks which saves memory for
setups with small number of estimators
- a task and its structure may be released if all
estimators are unlinked from its chains, leaving the
slot in the array empty
- every kthread data structure allows limited number
of estimators. Kthread 0 is also used to initially
calculate the max number of estimators to allow in every
chain considering a sub-100 microsecond cond_resched
rate. This number can be from 1 to hundreds.
- kthread 0 has an additional job of optimizing the
adding of estimators: they are first added in
temp list (est_temp_list) and later kthread 0
distributes them to other kthreads. The optimization
is based on the fact that newly added estimator
should be estimated after 2 seconds, so we have the
time to offload the adding to chain from controlling
process to kthread 0.
- to add new estimators we use the last added kthread
context (est_add_ktid). The new estimators are linked to
the chains just before the estimated one, based on add_row.
This ensures their estimation will start after 2 seconds.
If estimators are added in bursts, common case if all
services and dests are initially configured, we may
spread the estimators to more chains and as result,
reducing the initial delay below 2 seconds.
Many thanks to Jiri Wiesner for his valuable comments
and for spending a lot of time reviewing and testing
the changes on different platforms with 48-256 CPUs and
1-8 NUMA nodes under different cpufreq governors.
The new IPVS estimators do not use workqueue infrastructure
because:
- The estimation can take long time when using multiple IPVS rules (eg.
millions estimator structures) and especially when box has multiple
CPUs due to the for_each_possible_cpu usage that expects packets from
any CPU. With est_nice sysctl we have more control how to prioritize the
estimation kthreads compared to other processes/kthreads that have
latency requirements (such as servers). As a benefit, we can see these
kthreads in top and decide if we will need some further control to limit
their CPU usage (max number of structure to estimate per kthread).
- with kthreads we run code that is read-mostly, no write/lock
operations to process the estimators in 2-second intervals.
- work items are one-shot: as estimators are processed every
2 seconds, they need to be re-added every time. This again
loads the timers (add_timer) if we use delayed works, as there are
no kthreads to do the timings.
[1] Report from Yunhong Jiang:
https://lore.kernel.org/netdev/D25792C1-1B89-45DE-9F10-EC350DC04ADC@gmail.com/
[2] https://marc.info/?l=linux-virtual-server&m=159679809118027&w=2
[3] Report from Dust:
https://archive.linuxvirtualserver.org/html/lvs-devel/2020-12/msg00000.html
* git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-next:
ipvs: run_estimation should control the kthread tasks
ipvs: add est_cpulist and est_nice sysctl vars
ipvs: use kthreads for stats estimation
ipvs: use u64_stats_t for the per-cpu counters
ipvs: use common functions for stats allocation
ipvs: add rcu protection to stats
netfilter: flowtable: add a 'default' case to flowtable datapath
netfilter: conntrack: set icmpv6 redirects as RELATED
netfilter: ipset: Add support for new bitmask parameter
netfilter: conntrack: merge ipv4+ipv6 confirm functions
netfilter: conntrack: add sctp DATA_SENT state
netfilter: nft_inner: fix IS_ERR() vs NULL check
====================
Link: https://lore.kernel.org/r/20221211101204.1751-1-pablo@netfilter.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
List all the version information reported by the etas_es58x driver
through devlink. Also, update MAINTAINERS with the newly created file.
Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Link: https://lore.kernel.org/all/20221130174658.29282-8-mailhol.vincent@wanadoo.fr
[mkl: fixed version information table: "bl" -> "fw.bootloader"
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
As discussed in [1], abbreviating the bootloader to "bl" might not be
well understood. Instead, a bootloader technically being a firmware,
name it "fw.bootloader".
Add a new macro to devlink.h to formalize this new info attribute name
and update the documentation.
[1] https://lore.kernel.org/netdev/20221128142723.2f826d20@kernel.org/
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Link: https://lore.kernel.org/all/20221130174658.29282-5-mailhol.vincent@wanadoo.fr
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Allow the kthreads for stats to be configured for
specific cpulist (isolation) and niceness (scheduling
priority).
Signed-off-by: Julian Anastasov <ja@ssi.bg>
Cc: yunhong-cgl jiang <xintian1976@gmail.com>
Cc: "dust.li" <dust.li@linux.alibaba.com>
Reviewed-by: Jiri Wiesner <jwiesner@suse.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
-----BEGIN PGP SIGNATURE-----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=enQp
-----END PGP SIGNATURE-----
Merge tag 'ipsec-next-2022-12-09' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec-next
Steffen Klassert says:
====================
ipsec-next 2022-12-09
1) Add xfrm packet offload core API.
From Leon Romanovsky.
2) Add xfrm packet offload support for mlx5.
From Leon Romanovsky and Raed Salem.
3) Fix a typto in a error message.
From Colin Ian King.
* tag 'ipsec-next-2022-12-09' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec-next: (38 commits)
xfrm: Fix spelling mistake "oflload" -> "offload"
net/mlx5e: Open mlx5 driver to accept IPsec packet offload
net/mlx5e: Handle ESN update events
net/mlx5e: Handle hardware IPsec limits events
net/mlx5e: Update IPsec soft and hard limits
net/mlx5e: Store all XFRM SAs in Xarray
net/mlx5e: Provide intermediate pointer to access IPsec struct
net/mlx5e: Skip IPsec encryption for TX path without matching policy
net/mlx5e: Add statistics for Rx/Tx IPsec offloaded flows
net/mlx5e: Improve IPsec flow steering autogroup
net/mlx5e: Configure IPsec packet offload flow steering
net/mlx5e: Use same coding pattern for Rx and Tx flows
net/mlx5e: Add XFRM policy offload logic
net/mlx5e: Create IPsec policy offload tables
net/mlx5e: Generalize creation of default IPsec miss group and rule
net/mlx5e: Group IPsec miss handles into separate struct
net/mlx5e: Make clear what IPsec rx_err does
net/mlx5e: Flatten the IPsec RX add rule path
net/mlx5e: Refactor FTE setup code to be more clear
net/mlx5e: Move IPsec flow table creation to separate function
...
====================
Link: https://lore.kernel.org/r/20221209093310.4018731-1-steffen.klassert@secunet.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add an option to initialize SOF_TIMESTAMPING_OPT_ID for TCP from
write_seq sockets instead of snd_una.
This should have been the behavior from the start. Because processes
may now exist that rely on the established behavior, do not change
behavior of the existing option, but add the right behavior with a new
flag. It is encouraged to always set SOF_TIMESTAMPING_OPT_ID_TCP on
stream sockets along with the existing SOF_TIMESTAMPING_OPT_ID.
Intuitively the contract is that the counter is zero after the
setsockopt, so that the next write N results in a notification for
the last byte N - 1.
On idle sockets snd_una == write_seq and this holds for both. But on
sockets with data in transmission, snd_una records the unacked offset
in the stream. This depends on the ACK response from the peer. A
process cannot learn this in a race free manner (ioctl SIOCOUTQ is one
racy approach).
write_seq records the offset at the last byte written by the process.
This is a better starting point. It matches the intuitive contract in
all circumstances, unaffected by external behavior.
The new timestamp flag necessitates increasing sk_tsflags to 32 bits.
Move the field in struct sock to avoid growing the socket (for some
common CONFIG variants). The UAPI interface so_timestamping.flags is
already int, so 32 bits wide.
Reported-by: Sotirios Delimanolis <sotodel@meta.com>
Signed-off-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/r/20221207143701.29861-1-willemdebruijn.kernel@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Implement devlink port function commands to enable / disable migratable.
This is used to control the migratable capability of the device.
Signed-off-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Acked-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Expose port function commands to enable / disable migratable
capability, this is used to set the port function as migratable.
Live migration is the process of transferring a live virtual machine
from one physical host to another without disrupting its normal
operation.
In order for a VM to be able to perform LM, all the VM components must
be able to perform migration. e.g.: to be migratable.
In order for VF to be migratable, VF must be bound to VFIO driver with
migration support.
When migratable capability is enabled for a function of the port, the
device is making the necessary preparations for the function to be
migratable, which might include disabling features which cannot be
migrated.
Example of LM with migratable function configuration:
Set migratable of the VF's port function.
$ devlink port show pci/0000:06:00.0/2
pci/0000:06:00.0/2: type eth netdev enp6s0pf0vf1 flavour pcivf pfnum 0
vfnum 1
function:
hw_addr 00:00:00:00:00:00 migratable disable
$ devlink port function set pci/0000:06:00.0/2 migratable enable
$ devlink port show pci/0000:06:00.0/2
pci/0000:06:00.0/2: type eth netdev enp6s0pf0vf1 flavour pcivf pfnum 0
vfnum 1
function:
hw_addr 00:00:00:00:00:00 migratable enable
Bind VF to VFIO driver with migration support:
$ echo <pci_id> > /sys/bus/pci/devices/0000:08:00.0/driver/unbind
$ echo mlx5_vfio_pci > /sys/bus/pci/devices/0000:08:00.0/driver_override
$ echo <pci_id> > /sys/bus/pci/devices/0000:08:00.0/driver/bind
Attach VF to the VM.
Start the VM.
Perform LM.
Signed-off-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Acked-by: Shannon Nelson <shannon.nelson@amd.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Implement devlink port function commands to enable / disable RoCE.
This is used to control the RoCE device capabilities.
This patch implement infrastructure which will be used by downstream
patches that will add additional capabilities.
Signed-off-by: Yishai Hadas <yishaih@nvidia.com>
Signed-off-by: Daniel Jurgens <danielj@nvidia.com>
Signed-off-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Parav Pandit <parav@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Acked-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Expose port function commands to enable / disable RoCE, this is used to
control the port RoCE device capabilities.
When RoCE is disabled for a function of the port, function cannot create
any RoCE specific resources (e.g GID table).
It also saves system memory utilization. For example disabling RoCE enable a
VF/SF saves 1 Mbytes of system memory per function.
Example of a PCI VF port which supports function configuration:
Set RoCE of the VF's port function.
$ devlink port show pci/0000:06:00.0/2
pci/0000:06:00.0/2: type eth netdev enp6s0pf0vf1 flavour pcivf pfnum 0
vfnum 1
function:
hw_addr 00:00:00:00:00:00 roce enable
$ devlink port function set pci/0000:06:00.0/2 roce disable
$ devlink port show pci/0000:06:00.0/2
pci/0000:06:00.0/2: type eth netdev enp6s0pf0vf1 flavour pcivf pfnum 0
vfnum 1
function:
hw_addr 00:00:00:00:00:00 roce disable
Signed-off-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
devlink port function hw_addr attr documentation is in mlx5 specific
file while there is nothing mlx5 specific about it.
Move it to devlink-port.rst.
Signed-off-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add netlink based support for "ethtool -x <dev> [context x]"
command by implementing ETHTOOL_MSG_RSS_GET netlink message.
This is equivalent to functionality provided via ETHTOOL_GRSSH
in ioctl path. It sends RSS table, hash key and hash function
of an interface to user space.
This patch implements existing functionality available
in ioctl path and enables addition of new RSS context
based parameters in future.
Signed-off-by: Sudheer Mogilappagari <sudheer.mogilappagari@intel.com>
Link: https://lore.kernel.org/r/20221202002555.241580-1-sudheer.mogilappagari@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Correct xmit hash steps for layer3+4 as introduced by commit
49aefd1317 ("bonding: do not discard lowest hash bit for non layer3+4
hashing").
Signed-off-by: Jonathan Toppins <jtoppins@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
With commit c1f897ce18 ("bonding: set default miimon value for non-arp
modes if not set") the miimon default was changed from zero to 100 if
arp_interval is also zero. Document this fact in bonding.rst.
Fixes: c1f897ce18 ("bonding: set default miimon value for non-arp modes if not set")
Signed-off-by: Jonathan Toppins <jtoppins@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
dpaa2_mac_is_type_fixed() is a header with no implementation and no
callers, which is referenced from the documentation though. It can be
deleted.
On the other hand, it would be useful to reuse the code between
dpaa2_eth_is_type_phy() and dpaa2_switch_port_is_type_phy(). That common
code should be called dpaa2_mac_is_type_phy(), so let's create that.
The removal and the addition are merged into the same patch because,
in fact, is_type_phy() is the logical opposite of is_type_fixed().
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Tested-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Misc update for mlx5 driver
1) Various trivial cleanups
2) Maor Dickman, Adds support for trap offload with additional actions
3) From Tariq, UMR (device memory registrations) cleanups,
UMR WQE must be aligned to 64B per device spec, (not a bug fix).
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEGhZs6bAKwk/OTgTpSD+KveBX+j4FAmOG5Z0ACgkQSD+KveBX
+j5sEQf/fJBpqCth1niQcW0anBCrM5R+lXUBbg9NaZVNs94G21oTO5MeMz7EVCw5
JE+zkXAVeTPfHAvL59tlJZ//muJqlKUtC7ye/PicGc/K1rOIyVrPp1FgfMpWgWdk
Ol5BOlmBcFJUrtLs6C/IMwz/NdT/c3bn238T3Gfx+EPncMsvJakKr37QyuwUoOXD
NdPpbcL3GmbC0GGaq0gwL0la7bammz3d//qQd4rI+pt3DKt6NbKmGmxtjfm2XN1u
P0ph4dYpRJsJGvjTPjO2wqwhFIVts58viDFCLvECqXX4a1y62XMGcY9uw31ZTJPp
E+tO1+91aS+tTOQ5j6my/5N+eqkG7w==
=hlv/
-----END PGP SIGNATURE-----
Merge tag 'mlx5-updates-2022-11-29' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux
Saeed Mahameed says:
====================
mlx5-updates-2022-11-29
Misc update for mlx5 driver
1) Various trivial cleanups
2) Maor Dickman, Adds support for trap offload with additional actions
3) From Tariq, UMR (device memory registrations) cleanups,
UMR WQE must be aligned to 64B per device spec, (not a bug fix).
* tag 'mlx5-updates-2022-11-29' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux:
net/mlx5e: Support devlink reload of IPsec core
net/mlx5e: TC, Add offload support for trap with additional actions
net/mlx5e: Do early return when setup vports dests for slow path flow
net/mlx5: Remove redundant check
net/mlx5e: Delete always true DMA check
net/mlx5e: Don't access directly DMA device pointer
net/mlx5e: Don't use termination table when redundant
net/mlx5: Fix orthography errors in documentation
net/mlx5: Use generic definition for UMR KLM alignment
net/mlx5: Generalize name of UMR alignment definition
net/mlx5: Remove unused UMR MTT definitions
net/mlx5e: Add padding when needed in UMR WQEs
net/mlx5: Remove unused ctx variables
net/mlx5e: Replace zero-length arrays with DECLARE_FLEX_ARRAY() helper
net/mlx5e: Remove unneeded io-mapping.h #include
====================
Link: https://lore.kernel.org/r/20221130051152.479480-1-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Implement the .read handler for the NVM and Shadow RAM regions. This
enables user space to read a small chunk of the flash without needing the
overhead of creating a full snapshot.
Update the documentation for ice to detail which regions have direct read
support.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
78ad87da99 ("ice: devlink: add shadow-ram region to snapshot Shadow RAM")
added support for the 'shadow-ram' devlink region, but did not document it
in the ice devlink documentation. Fix this.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
To read from a region, user space must currently request a new snapshot of
the region and then read from that snapshot. This can sometimes be overkill
if user space only reads a tiny portion. They first create the snapshot,
then request a read, then destroy the snapshot.
For regions which have a single underlying "contents", it makes sense to
allow supporting direct reading of the region data.
Extend the DEVLINK_CMD_REGION_READ to allow direct reading from a region if
requested via the new DEVLINK_ATTR_REGION_DIRECT. If this attribute is set,
then perform a direct read instead of using a snapshot. Direct read is
mutually exclusive with DEVLINK_ATTR_REGION_SNAPSHOT_ID, and care is taken
to ensure that we reject commands which provide incorrect attributes.
Regions must enable support for direct read by implementing the .read()
callback function. If a region does not support such direct reads, a
suitable extended error message is reported.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The documentation refers to invalid web page under www.linuxfoundation.org
The patch refers to a working URL under wiki.linuxfoundation.org
Signed-off-by: Nir Levy <bhr166@gmail.com>
Link: https://lore.kernel.org/all/20221120220630.7443-1-bhr166@gmail.com/
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
kernel test robot reported indentation warnings:
Documentation/networking/devlink/devlink-port.rst:220: WARNING: Unexpected indentation.
Documentation/networking/devlink/devlink-port.rst:222: WARNING: Block quote ends without a blank line; unexpected unindent.
These warnings cause lists (arbitration flow for which the warnings blame to
and 3-step subfunction setup) to be rendered inline instead. Also, for the
former list, automatic list numbering is messed up.
Fix these warnings by adding missing blank line padding.
Link: https://lore.kernel.org/linux-doc/202211200926.kfOPiVti-lkp@intel.com/
Fixes: 242dd64375 ("Documentation: Add documentation for new devlink-rate attributes")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch is to add sysctl net.sctp.l3mdev_accept to allow
users to change the pernet global l3mdev_accept.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Provide documentation for newly introduced netlink attributes for
devlink-rate: tx_priority and tx_weight.
Mention the possibility to export tree from the driver.
Signed-off-by: Michal Wilczynski <michal.wilczynski@intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add documentation to a newly added devlink-rate feature. Provide some
examples on how to use the commands, which netlink attributes are
supported and descriptions of the attributes.
Signed-off-by: Michal Wilczynski <michal.wilczynski@intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The maximum hash table size is 64K due to the nature of the protocol. [0]
It's smaller than TCP, and fewer sockets can cause a performance drop.
On an EC2 c5.24xlarge instance (192 GiB memory), after running iperf3 in
different netns, creating 32Mi sockets without data transfer in the root
netns causes regression for the iperf3's connection.
uhash_entries sockets length Gbps
64K 1 1 5.69
1Mi 16 5.27
2Mi 32 4.90
4Mi 64 4.09
8Mi 128 2.96
16Mi 256 2.06
32Mi 512 1.12
The per-netns hash table breaks the lengthy lists into shorter ones. It is
useful on a multi-tenant system with thousands of netns. With smaller hash
tables, we can look up sockets faster, isolate noisy neighbours, and reduce
lock contention.
The max size of the per-netns table is 64K as well. This is because the
possible hash range by udp_hashfn() always fits in 64K within the same
netns and we cannot make full use of the whole buckets larger than 64K.
/* 0 < num < 64K -> X < hash < X + 64K */
(num + net_hash_mix(net)) & mask;
Also, the min size is 128. We use a bitmap to search for an available
port in udp_lib_get_port(). To keep the bitmap on the stack and not
fire the CONFIG_FRAME_WARN error at build time, we round up the table
size to 128.
The sysctl usage is the same with TCP:
$ dmesg | cut -d ' ' -f 6- | grep "UDP hash"
UDP hash table entries: 65536 (order: 9, 2097152 bytes, vmalloc)
# sysctl net.ipv4.udp_hash_entries
net.ipv4.udp_hash_entries = 65536 # can be changed by uhash_entries
# sysctl net.ipv4.udp_child_hash_entries
net.ipv4.udp_child_hash_entries = 0 # disabled by default
# ip netns add test1
# ip netns exec test1 sysctl net.ipv4.udp_hash_entries
net.ipv4.udp_hash_entries = -65536 # share the global table
# sysctl -w net.ipv4.udp_child_hash_entries=100
net.ipv4.udp_child_hash_entries = 100
# ip netns add test2
# ip netns exec test2 sysctl net.ipv4.udp_hash_entries
net.ipv4.udp_hash_entries = 128 # own a per-netns table with 2^n buckets
We could optimise the hash table lookup/iteration further by removing
the netns comparison for the per-netns one in the future. Also, we
could optimise the sparse udp_hslot layout by putting it in udp_table.
[0]: https://lore.kernel.org/netdev/4ACC2815.7010101@gmail.com/
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The NFP documentation is updated to include information about Corigine,
and the new NFP3800 chips. The 'Acquiring Firmware' section is updated
with new information about where to find firmware.
Two new sections are added to expand the coverage of the documentation.
The new sections include:
- Devlink Info
- Configure Device
Signed-off-by: Walter Heymans <walter.heymans@corigine.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@corigine.com>
Reviewed-by: Louis Peens <louis.peens@corigine.com>
Signed-off-by: Simon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/r/20221115090834.738645-1-simon.horman@corigine.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add packet traps for 802.1X operation. The "eapol" control trap is used
to trap EAPOL packets and is required for the correct operation of the
control plane. The "locked_port" drop trap can be enabled to gain
visibility into packets that were dropped by the device due to the
locked bridge port check.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The previous attempt to augment carrier_down (see Link)
was not met with much enthusiasm so let's do the simple
thing of exposing what some devices already maintain.
Add a common ethtool statistic for link going down.
Currently users have to maintain per-driver mapping
to extract the right stat from the vendor-specific ethtool -S
stats. carrier_down does not fit the bill because it counts
a lot of software related false positives.
Add the statistic to the extended link state API to steer
vendors towards implementing all of it.
Implement for bnxt and all Linux-controlled PHYs. mlx5 and (possibly)
enic also have a counter for this but I leave the implementation
to their maintainers.
Link: https://lore.kernel.org/r/20220520004500.2250674-1-kuba@kernel.org
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Michael Chan <michael.chan@broadcom.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Link: https://lore.kernel.org/r/20221104190125.684910-1-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Add support for Octeon device CNF95N.
CNF95N is a Octeon Fusion family product with same PCI NIC
characteristics as CN93 which is currently supported by the driver.
update supported device list in Documentation.
Signed-off-by: Veerasenareddy Burru <vburru@marvell.com>
Link: https://lore.kernel.org/r/20221103060600.1858-1-vburru@marvell.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
PLB (Protective Load Balancing) is a host based mechanism for load
balancing across switch links. It leverages congestion signals(e.g. ECN)
from transport layer to randomly change the path of the connection
experiencing congestion. PLB changes the path of the connection by
changing the outgoing IPv6 flow label for IPv6 connections (implemented
in Linux by calling sk_rethink_txhash()). Because of this implementation
mechanism, PLB can currently only work for IPv6 traffic. For more
information, see the SIGCOMM 2022 paper:
https://doi.org/10.1145/3544216.3544226
This commit adds new sysctl knobs and sets their default values for
TCP PLB.
Signed-off-by: Mubashir Adnan Qureshi <mubashirq@google.com>
Signed-off-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Marc Kleine-Budde says:
====================
this is a pull request of 29 patches for net-next/master.
The first patch is by Daniel S. Trevitz and adds documentation for
switchable termination resistors.
Zhang Changzhong's patch fixes a debug output in the j13939 stack.
Oliver Hartkopp finally removes the pch_can driver, which is
superseded by the generic c_can driver.
Gustavo A. R. Silva replaces a zero-length array with
DECLARE_FLEX_ARRAY() in the ucan driver.
Kees Cook's patch removes a no longer needed silencing of
"-Warray-bounds" warnings for the kvaser_usb driver.
The next 2 patches target the m_can driver. The first is by me cleans
up the LEC error handling, the second is by Vivek Yadav and extends
the LEC error handling to the data phase of CAN-FD frames.
The next 9 patches all target the gs_usb driver. The first 5 patches
are by me and improve the Kconfig prompt and help text, set
netdev->dev_id to distinguish multi CAN channel devices, allow
loopback and listen only at the same time, and clean up the
gs_can_open() function a bit. The remaining 4 patches are by Jeroen
Hofstee and add support for 2 new features: Bus Error Reporting and
Get State.
Jimmy Assarsson and Anssi Hannula contribute 10 patches for the
kvaser_usb driver. They first add Listen Only and Bus Error Reporting
support, handle CMD_ERROR_EVENT errors, improve CAN state handling,
restart events, and configuration of the bit timing parameters.
Another patch by me which fixes the indention in the m_can driver.
A patch by Dongliang Mu cleans up the ucan_disconnect() function in
the ucan driver.
The last patch by Biju Das is for the rcan_canfd driver and cleans up
the reset handling.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Add tc-queue-filters.rst with notes on TC filters for
selecting a set of queues and/or a queue.
Signed-off-by: Amritha Nambiar <amritha.nambiar@intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Add documentation for how to use and setup the switchable termination
resistor support for CAN controllers.
Signed-off-by: Daniel Trevitz <dan@sstrev.com>
Link: https://lore.kernel.org/all/3441354.44csPzL39Z@daniel6430
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
-----BEGIN PGP SIGNATURE-----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=M+mV
-----END PGP SIGNATURE-----
Merge tag 'random-6.1-rc1-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/crng/random
Pull more random number generator updates from Jason Donenfeld:
"This time with some large scale treewide cleanups.
The intent of this pull is to clean up the way callers fetch random
integers. The current rules for doing this right are:
- If you want a secure or an insecure random u64, use get_random_u64()
- If you want a secure or an insecure random u32, use get_random_u32()
The old function prandom_u32() has been deprecated for a while
now and is just a wrapper around get_random_u32(). Same for
get_random_int().
- If you want a secure or an insecure random u16, use get_random_u16()
- If you want a secure or an insecure random u8, use get_random_u8()
- If you want secure or insecure random bytes, use get_random_bytes().
The old function prandom_bytes() has been deprecated for a while
now and has long been a wrapper around get_random_bytes()
- If you want a non-uniform random u32, u16, or u8 bounded by a
certain open interval maximum, use prandom_u32_max()
I say "non-uniform", because it doesn't do any rejection sampling
or divisions. Hence, it stays within the prandom_*() namespace, not
the get_random_*() namespace.
I'm currently investigating a "uniform" function for 6.2. We'll see
what comes of that.
By applying these rules uniformly, we get several benefits:
- By using prandom_u32_max() with an upper-bound that the compiler
can prove at compile-time is ≤65536 or ≤256, internally
get_random_u16() or get_random_u8() is used, which wastes fewer
batched random bytes, and hence has higher throughput.
- By using prandom_u32_max() instead of %, when the upper-bound is
not a constant, division is still avoided, because
prandom_u32_max() uses a faster multiplication-based trick instead.
- By using get_random_u16() or get_random_u8() in cases where the
return value is intended to indeed be a u16 or a u8, we waste fewer
batched random bytes, and hence have higher throughput.
This series was originally done by hand while I was on an airplane
without Internet. Later, Kees and I worked on retroactively figuring
out what could be done with Coccinelle and what had to be done
manually, and then we split things up based on that.
So while this touches a lot of files, the actual amount of code that's
hand fiddled is comfortably small"
* tag 'random-6.1-rc1-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/crng/random:
prandom: remove unused functions
treewide: use get_random_bytes() when possible
treewide: use get_random_u32() when possible
treewide: use get_random_{u8,u16}() when possible, part 2
treewide: use get_random_{u8,u16}() when possible, part 1
treewide: use prandom_u32_max() when possible, part 2
treewide: use prandom_u32_max() when possible, part 1
The prandom_u32() function has been a deprecated inline wrapper around
get_random_u32() for several releases now, and compiles down to the
exact same code. Replace the deprecated wrapper with a direct call to
the real function. The same also applies to get_random_int(), which is
just a wrapper around get_random_u32(). This was done as a basic find
and replace.
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Yury Norov <yury.norov@gmail.com>
Reviewed-by: Jan Kara <jack@suse.cz> # for ext4
Acked-by: Toke Høiland-Jørgensen <toke@toke.dk> # for sch_cake
Acked-by: Chuck Lever <chuck.lever@oracle.com> # for nfsd
Acked-by: Jakub Kicinski <kuba@kernel.org>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> # for thunderbolt
Acked-by: Darrick J. Wong <djwong@kernel.org> # for xfs
Acked-by: Helge Deller <deller@gmx.de> # for parisc
Acked-by: Heiko Carstens <hca@linux.ibm.com> # for s390
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Add interface to support Power Sourcing Equipment. At current step it
provides generic way to address all variants of PSE devices as defined
in IEEE 802.3-2018 but support only objects specified for IEEE 802.3-2018 104.4
PoDL Power Sourcing Equipment (PSE).
Currently supported and mandatory objects are:
IEEE 802.3-2018 30.15.1.1.3 aPoDLPSEPowerDetectionStatus
IEEE 802.3-2018 30.15.1.1.2 aPoDLPSEAdminState
IEEE 802.3-2018 30.15.1.2.1 acPoDLPSEAdminControl
This is minimal interface needed to control PSE on each separate
ethernet port but it provides not all mandatory objects specified in
IEEE 802.3-2018.
Since "PoDL PSE" and "PSE" have similar names, but some different values
I decide to not merge them and keep separate naming schema. This should
allow as to be as close to IEEE 802.3 spec as possible and avoid name
conflicts in the future.
This implementation is connected to PHYs instead of MACs because PSE
auto classification can potentially interfere with PHY auto negotiation.
So, may be some extra PHY related initialization will be needed.
With WIP version of ethtools interaction with PSE capable link looks
as following:
$ ip l
...
5: t1l1@eth0: <BROADCAST,MULTICAST> ..
...
$ ethtool --show-pse t1l1
PSE attributs for t1l1:
PoDL PSE Admin State: disabled
PoDL PSE Power Detection Status: disabled
$ ethtool --set-pse t1l1 podl-pse-admin-control enable
$ ethtool --show-pse t1l1
PSE attributs for t1l1:
PoDL PSE Admin State: enabled
PoDL PSE Power Detection Status: delivering power
Signed-off-by: kernel test robot <lkp@intel.com>
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Bagas Sanjaya <bagasdotme@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This adds support for rate matching (also known as rate adaptation) to
the phy subsystem. The general idea is that the phy interface runs at
one speed, and the MAC throttles the rate at which it sends packets to
the link speed. There's a good overview of several techniques for
achieving this at [1]. This patch adds support for three: pause-frame
based (such as in Aquantia phys), CRS-based (such as in 10PASS-TS and
2BASE-TL), and open-loop-based (such as in 10GBASE-W).
This patch makes a few assumptions and a few non assumptions about the
types of rate matching available. First, it assumes that different phys
may use different forms of rate matching. Second, it assumes that phys
can use rate matching for any of their supported link speeds (e.g. if a
phy supports 10BASE-T and XGMII, then it can adapt XGMII to 10BASE-T).
Third, it does not assume that all interface modes will use the same
form of rate matching. Fourth, it does not assume that all phy devices
will support rate matching (even if some do). Relaxing or strengthening
these (non-)assumptions could result in a different API. For example, if
all interface modes were assumed to use the same form of rate matching,
then a bitmask of interface modes supportting rate matching would
suffice.
For some better visibility into the process, the current rate matching
mode is exposed as part of the ethtool ksettings. For the moment, only
read access is supported. I'm not sure what userspace might want to
configure yet (disable it altogether, disable just one mode, specify the
mode to use, etc.). For the moment, since only pause-based rate
adaptation support is added in the next few commits, rate matching can
be disabled altogether by adjusting the advertisement.
802.3 calls this feature "rate adaptation" in clause 49 (10GBASE-R) and
"rate matching" in clause 61 (10PASS-TL and 2BASE-TS). Aquantia also calls
this feature "rate adaptation". I chose "rate matching" because it is
shorter, and because Russell doesn't think "adaptation" is correct in this
context.
Signed-off-by: Sean Anderson <sean.anderson@seco.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently, SMC uses smc->sk.sk_{rcv|snd}buf to create buffers for
send buffer and RMB. And the values of buffer size are from tcp_{w|r}mem
in clcsock.
The buffer size from TCP socket doesn't fit SMC well. Generally, buffers
are usually larger than TCP for SMC-R/-D to get higher performance, for
they are different underlay devices and paths.
So this patch unbinds buffer size from TCP, and introduces two sysctl
knobs to tune them independently. Also, these knobs are per net
namespace and work for containers.
Signed-off-by: Tony Lu <tonylu@linux.alibaba.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
SMC-R tests the viability of link by sending out TEST_LINK LLC
messages over RoCE fabric when connections on link have been
idle for a time longer than keepalive interval (testlink time).
But using tcp_keepalive_time as testlink time maybe not quite
suitable because it is default no less than two hours[1], which
is too long for single link to find peer dead. The active host
will still use peer-dead link (QP) sending messages, and can't
find out until get IB_WC_RETRY_EXC_ERR error CQEs, which takes
more time than TEST_LINK timeout (SMC_LLC_WAIT_TIME) normally.
So this patch introduces a independent sysctl for SMC-R to set
link keepalive time, in order to detect link down in time. The
default value is 30 seconds.
[1] https://www.rfc-editor.org/rfc/rfc1122#page-101
Signed-off-by: Wen Gu <guwen@linux.alibaba.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
There's no clear explanation of what VF Representors are for, their
semantics, etc., outside of vendor docs and random conference slides.
Add a document explaining Representors and defining what drivers that
implement them are expected to do.
Signed-off-by: Edward Cree <ecree.xilinx@gmail.com>
Reviewed-by: Bagas Sanjaya <bagasdotme@gmail.com>
Link: https://lore.kernel.org/r/20220905135557.39233-1-ecree@xilinx.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This toggle has been already remove by b118509076 ("netfilter: remove
nf_conntrack_helper sysctl and modparam toggles").
Remove the documentation entry for this toggle too.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Florian Westphal <fw@strlen.de>
The more sockets we have in the hash table, the longer we spend looking
up the socket. While running a number of small workloads on the same
host, they penalise each other and cause performance degradation.
The root cause might be a single workload that consumes much more
resources than the others. It often happens on a cloud service where
different workloads share the same computing resource.
On EC2 c5.24xlarge instance (196 GiB memory and 524288 (1Mi / 2) ehash
entries), after running iperf3 in different netns, creating 24Mi sockets
without data transfer in the root netns causes about 10% performance
regression for the iperf3's connection.
thash_entries sockets length Gbps
524288 1 1 50.7
24Mi 48 45.1
It is basically related to the length of the list of each hash bucket.
For testing purposes to see how performance drops along the length,
I set 131072 (1Mi / 8) to thash_entries, and here's the result.
thash_entries sockets length Gbps
131072 1 1 50.7
1Mi 8 49.9
2Mi 16 48.9
4Mi 32 47.3
8Mi 64 44.6
16Mi 128 40.6
24Mi 192 36.3
32Mi 256 32.5
40Mi 320 27.0
48Mi 384 25.0
To resolve the socket lookup degradation, we introduce an optional
per-netns hash table for TCP, but it's just ehash, and we still share
the global bhash, bhash2 and lhash2.
With a smaller ehash, we can look up non-listener sockets faster and
isolate such noisy neighbours. In addition, we can reduce lock contention.
We can control the ehash size by a new sysctl knob. However, depending
on workloads, it will require very sensitive tuning, so we disable the
feature by default (net.ipv4.tcp_child_ehash_entries == 0). Moreover,
we can fall back to using the global ehash in case we fail to allocate
enough memory for a new ehash. The maximum size is 16Mi, which is large
enough that even if we have 48Mi sockets, the average list length is 3,
and regression would be less than 1%.
We can check the current ehash size by another read-only sysctl knob,
net.ipv4.tcp_ehash_entries. A negative value means the netns shares
the global ehash (per-netns ehash is disabled or failed to allocate
memory).
# dmesg | cut -d ' ' -f 5- | grep "established hash"
TCP established hash table entries: 524288 (order: 10, 4194304 bytes, vmalloc hugepage)
# sysctl net.ipv4.tcp_ehash_entries
net.ipv4.tcp_ehash_entries = 524288 # can be changed by thash_entries
# sysctl net.ipv4.tcp_child_ehash_entries
net.ipv4.tcp_child_ehash_entries = 0 # disabled by default
# ip netns add test1
# ip netns exec test1 sysctl net.ipv4.tcp_ehash_entries
net.ipv4.tcp_ehash_entries = -524288 # share the global ehash
# sysctl -w net.ipv4.tcp_child_ehash_entries=100
net.ipv4.tcp_child_ehash_entries = 100
# ip netns add test2
# ip netns exec test2 sysctl net.ipv4.tcp_ehash_entries
net.ipv4.tcp_ehash_entries = 128 # own a per-netns ehash with 2^n buckets
When more than two processes in the same netns create per-netns ehash
concurrently with different sizes, we need to guarantee the size in
one of the following ways:
1) Share the global ehash and create per-netns ehash
First, unshare() with tcp_child_ehash_entries==0. It creates dedicated
netns sysctl knobs where we can safely change tcp_child_ehash_entries
and clone()/unshare() to create a per-netns ehash.
2) Control write on sysctl by BPF
We can use BPF_PROG_TYPE_CGROUP_SYSCTL to allow/deny read/write on
sysctl knobs.
Note that the global ehash allocated at the boot time is spread over
available NUMA nodes, but inet_pernet_hashinfo_alloc() will allocate
pages for each per-netns ehash depending on the current process's NUMA
policy. By default, the allocation is done in the local node only, so
the per-netns hash table could fully reside on a random node. Thus,
depending on the NUMA policy the netns is created with and the CPU the
current thread is running on, we could see some performance differences
for highly optimised networking applications.
Note also that the default values of two sysctl knobs depend on the ehash
size and should be tuned carefully:
tcp_max_tw_buckets : tcp_child_ehash_entries / 2
tcp_max_syn_backlog : max(128, tcp_child_ehash_entries / 128)
As a bonus, we can dismantle netns faster. Currently, while destroying
netns, we call inet_twsk_purge(), which walks through the global ehash.
It can be potentially big because it can have many sockets other than
TIME_WAIT in all netns. Splitting ehash changes that situation, where
it's only necessary for inet_twsk_purge() to clean up TIME_WAIT sockets
in each netns.
With regard to this, we do not free the per-netns ehash in inet_twsk_kill()
to avoid UAF while iterating the per-netns ehash in inet_twsk_purge().
Instead, we do it in tcp_sk_exit_batch() after calling tcp_twsk_purge() to
keep it protocol-family-independent.
In the future, we could optimise ehash lookup/iteration further by removing
netns comparison for the per-netns ehash.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
DSA now supports multiple CPU ports, explain the use cases that are
covered, the new UAPI, the permitted degrees of freedom, the driver API,
and remove some old "hanging fruits".
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQFHBAABCgAxFiEEBsvAIBsPu6mG7thcrX5LkNig010FAmMi3OwTHG1rbEBwZW5n
dXRyb25peC5kZQAKCRCtfkuQ2KDTXafhCACHLzDn9otKPWe+w6Lt1RSuhKvhbuhO
XywQ4EBEUddOrqYarEuFiuWZMq1/PLGnkWVQotzElZR9HtkTUUetXgfsWHv39uo+
SqUK7P+DnuT9AvvUkk1ZoyVYxs8FnVWoPlcBli+zXZCjtg/XYn/2qPGJlaNPovLv
hzVokS/RVxlPIrQiNWVmkHyTb6LyLdLit802dtdaxKmQcUCgYVAiz+DwR0PwBEWs
e1K046RIfl5QejpkVq+pIXpTGu1C4m2bv1umPCts1OLtBGkHf7Dwu9HmgWPDwY91
0oJt/00NpQLgg77vnOJnv0M/TZE9cP9gp7zFh7b43qg0TpIzHhJJYJut
=UEkq
-----END PGP SIGNATURE-----
Merge tag 'linux-can-next-for-6.1-20220915' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next
Marc Kleine-Budde says:
====================
Sept. 15, 2022, 8:19 a.m. UTC
Hello Jakub, hello David,
this is a pull request of 23 patches for net-next/master.
the first 2 patches are by me and fix a typo in the rx-offload helper
and the flexcan driver.
Christophe JAILLET's patch cleans up the error handling in
rcar_canfd driver's probe function.
Kenneth Lee's patch converts the kvaser_usb driver from kcalloc() to
kzalloc().
Biju Das contributes 2 patches to the sja1000 driver which update the
DT bindings and support for the RZ/N1 SJA1000 CAN controller.
Jinpeng Cui provides 2 patches that remove redundant variables from
the sja1000 and kvaser_pciefd driver.
2 patches by John Whittington and me add hardware timestamp support to
the gs_usb driver.
Gustavo A. R. Silva's patch converts the etas_es58x driver to make use
of DECLARE_FLEX_ARRAY().
Krzysztof Kozlowski's patch cleans up the sja1000 DT bindings.
Dario Binacchi fixes his invalid email in the flexcan driver
documentation.
Ziyang Xuan contributes 2 patches that clean up the CAN RAW protocol.
Yang Yingliang's patch switches the flexcan driver to dev_err_probe().
The last 7 patches are by Oliver Hartkopp and add support for the next
generation of the CAN protocol: CAN with eXtended data Length (CAN XL).
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
drivers/net/ethernet/freescale/fec.h
7d650df99d ("net: fec: add pm_qos support on imx6q platform")
40c79ce13b ("net: fec: add stop mode support for imx8 platform")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Add 1000BASE-KX interface mode. This 1G backplane ethernet as described in
clause 70. Clause 73 autonegotiation is mandatory, and only full duplex
operation is supported.
Although at the PMA level this interface mode is identical to
1000BASE-X, it uses a different form of in-band autonegation. This
justifies a separate interface mode, since the interface mode (along
with the MLO_AN_* autonegotiation mode) sets the type of autonegotiation
which will be used on a link. This results in more than just electrical
differences between the link modes.
With regard to 1000BASE-X, 1000BASE-KX holds a similar position to
SGMII: same signaling, but different autonegotiation. PCS drivers
(which typically handle in-band autonegotiation) may only support
1000BASE-X, and not 1000BASE-KX. Similarly, the phy mode is used to
configure serdes phys with phy_set_mode_ext. Due to the different
electrical standards (SFI or XFI vs Clause 70), they will likely want to
use different configuration. Adding a phy interface mode for
1000BASE-KX helps simplify configuration in these areas.
Signed-off-by: Sean Anderson <sean.anderson@seco.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
-----BEGIN PGP SIGNATURE-----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=GW48
-----END PGP SIGNATURE-----
Merge tag 'rxrpc-fixes-20220901' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs
David Howells says:
====================
rxrpc fixes
Here are some fixes for AF_RXRPC:
(1) Fix the handling of ICMP/ICMP6 packets. This is a problem due to
rxrpc being switched to acting as a UDP tunnel, thereby allowing it to
steal the packets before they go through the UDP Rx queue. UDP
tunnels can't get ICMP/ICMP6 packets, however. This patch adds an
additional encap hook so that they can.
(2) Fix the encryption routines in rxkad to handle packets that have more
than three parts correctly. The problem is that ->nr_frags doesn't
count the initial fragment, so the sglist ends up too short.
(3) Fix a problem with destruction of the local endpoint potentially
getting repeated.
(4) Fix the calculation of the time at which to resend.
jiffies_to_usecs() gives microseconds, not nanoseconds.
(5) Fix AFS to work out when callback promises and locks expire based on
the time an op was issued rather than the time the first reply packet
arrives. We don't know how long the server took between calculating
the expiry interval and transmitting the reply.
(6) Given (5), rxrpc_get_reply_time() is no longer used, so remove it.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Remove rxrpc_get_reply_time() as that is no longer used now that the call
issue time is used instead of the reply time.
Signed-off-by: David Howells <dhowells@redhat.com>
Because per host rate limiting has been proven problematic (side channel
attacks can be based on it), per host rate limiting of challenge acks ideally
should be per netns and turned off by default.
This is a long due followup of following commits:
083ae30828 ("tcp: enable per-socket rate limiting of all 'challenge acks'")
f2b2c582e8 ("tcp: mitigate ACK loops for connections as tcp_sock")
75ff39ccc1 ("tcp: make challenge acks less predictable")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Jason Baron <jbaron@akamai.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Stanislav Fomichev