The documentation in one occasion mentions the
VIDIOC_SUBDEV_STREAM_FL_ACTIVE flag. This was meant to be
V4L2_SUBDEV_STREAM_FL_ACTIVE as it's a flag, not an IOCTL. Fix it.
Fixes: cd2c75454d ("media: Documentation: Document S_ROUTING behaviour")
Reported-by: Samuel Wein PhD <sam@samwein.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
This is a packed grey-scale image format with a depth of 14 bits per
pixel. Every four consecutive samples are packed into seven bytes. Each
of the first four bytes contain the eight high order bits of the pixels,
and the three following bytes contains the six least significants bits
of each pixel, in the same order.
As the other formats only needed 5 bytes before, append two bytes in the
documentation array.
Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
This is a packed grey-scale image format with a depth of 12 bits per
pixel. Two consecutive pixels are packed into 3 bytes. The first 2 bytes
contain the 8 high order bits of the pixels, and the 3rd byte contains
the 4 least significants bits of each pixel, in the same order.
Add the entry in userspace API, and document it.
Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Return the routes set using S_ROUTING back to the user. Also reflect this
in documentation.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
The len_routes field is used to tell the size of the routes array in
struct v4l2_subdev_routing. This way the number of routes returned from
S_ROUTING IOCTL may be larger than the number of routes provided, in case
there are more routes returned by the driver.
Note that this uAPI is still disabled in the code, so this change can
safely be done. Anyone who manually patched the code to enable this uAPI
must update their code.
The patch also increases the number of reserved fields in struct
v4l2_subdev_routing.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Document S_ROUTING behaviour for different devices.
Generally in devices that produce streams the streams are static and some
can be enabled and disabled, whereas in devices that just transport them
or write them to memory, more configurability is allowed. Document this.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Julien Massot <julien.massot@collabora.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Having extra streams on the source end of the link that cannot be captured
by the sink sub-device generally are not an issue, at least not on CSI-2
bus. Still document that there may be hardware-specific limitations. For
example on parallel bus this might not work on all cases.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Many camera sensors, among other devices, transmit embedded data and image
data for each CSI-2 frame. This embedded data typically contains register
configuration of the sensor that has been used to capture the image data
of the same frame.
The embedded data is received by the CSI-2 receiver and has the same
properties as the image data, including that it is line based: it has
width, height and bytesperline (stride).
Add these fields to struct v4l2_meta_format and document them.
Also add V4L2_FMT_FLAG_META_LINE_BASED to tell a given format is
line-based i.e. these fields of struct v4l2_meta_format are valid for it.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Generic 8-bit metadata formats define the in-memory data layout but not
the format of the data itself. The reasoning for having such formats is to
allow CSI-2 receiver drivers to receive and DMA drivers to write the data
to memory without knowing a large number of device-specific formats.
These formats may be used only in conjunction with a Media Controller
pipeline where the internal pad of the source sub-device defines the
specific format of the data (using an mbus code).
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Now that metadata mbus formats have been added, it is necessary to define
which fields in struct v4l2_mbus_format are applicable to them (not many).
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Add generic serial metadata mbus formats. These formats describe data
width and packing but not the content itself. The reason for specifying
such formats is that the formats as such are fairly device specific but
they are still handled by CSI-2 receiver drivers that should not be aware
of device specific formats. What makes generic metadata formats possible
is that these formats are parsed by software only, after capturing the
data to system memory.
Also add a definition for "Data Unit" to cover what is essentially a pixel
but is not image data.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Add term "stream" to the glossary of the Media subsystem documentation.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
The V4L2 subdev crop API has been marked as obsolete, deprecated by the
selection API. Despite this, it has recently been extended with streams
support. In hindsight this was a mistake. Make sure it doesn't happen
again by clearly documenting that no new extensions will be accepted.
Suggested-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
The error that V4L2 returns when an attempt is made to open an
unregisted device node is ENODEV, no ENXIO. Update the documentation.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
If the CEC device is unregistered, then an attempt to open
the device node should result in an -ENODEV error instead of
-ENXIO.
Document this as well in cec-func-open.rst.
This is consistent with the error code returned by other
file operations such as ioctl.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Fix "The the" typo in the documentation.
Signed-off-by: hanchunchao <hanchunchao@inspur.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
[hverkuil: added commit log]
The v4l2_buffer type has an "offset" field, but the corresponding field
in the v4l2_plane type is called "mem_offset". Use the correct name in
this example.
Signed-off-by: Matthijs Kooijman <matthijs@stdin.nl>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
VIDIOC_REMOVE_BUFS ioctl allows to remove buffers from a queue.
The number of buffers to remove in given by count field of
struct v4l2_remove_buffers and the range start at the index
specified in the same structure.
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@collabora.com>
Reviewed-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
[hverkuil: vidioc-remove-bufs.rst: mention no bufs are freed on error]
The existing documentation of the legacy DVB Decoder API was incomplete.
Revising the documentation, adding missing parts and arranging the
documentation files new.
This patch contains the new index file and links to it.
Link: https://lore.kernel.org/linux-media/20240128233249.32794-2-herdler@nurfuerspam.de
Signed-off-by: Stefan Herdler <herdler@nurfuerspam.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
The existing documentation of the legacy DVB Decoder API was incomplete.
Revising the documentation, adding missing parts and arranging the
documentation files new.
This patch contains the documentation of the function calls defined in
video.h.
Link: https://lore.kernel.org/linux-media/20240128233249.32794-7-herdler@nurfuerspam.de
Signed-off-by: Stefan Herdler <herdler@nurfuerspam.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
The existing documentation of the legacy DVB Decoder API was incomplete.
Revising the documentation, adding missing parts and arranging the
documentation files new.
This patch contains the documentation of the data types defined in
video.h.
Link: https://lore.kernel.org/linux-media/20240128233249.32794-6-herdler@nurfuerspam.de
Signed-off-by: Stefan Herdler <herdler@nurfuerspam.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
The existing documentation of the legacy DVB Decoder API was incomplete.
Revising the documentation, adding missing parts and arranging the
documentation files new.
This patch contains the documentation of the function calls defined in
audio.h.
Link: https://lore.kernel.org/linux-media/20240128233249.32794-5-herdler@nurfuerspam.de
Signed-off-by: Stefan Herdler <herdler@nurfuerspam.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
The existing documentation of the legacy DVB Decoder API was incomplete.
Revising the documentation, adding missing parts and arranging the
documentation files new.
This patch contains the documentation of the data types defined in
audio.h.
Link: https://lore.kernel.org/linux-media/20240128233249.32794-4-herdler@nurfuerspam.de
Signed-off-by: Stefan Herdler <herdler@nurfuerspam.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
The existing documentation of the legacy DVB Decoder API was incomplete.
Revising the documentation, adding missing parts and arranging the
documentation files new.
This patch contains the documentation of osd.h.
Link: https://lore.kernel.org/linux-media/20240128233249.32794-3-herdler@nurfuerspam.de
Signed-off-by: Stefan Herdler <herdler@nurfuerspam.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
The MEDIA_PAD_FL_MUST_CONNECT flag indicates that the pad requires an
enabled link to stream, but only if it has any link at all. This makes
little sense, as if a pad is part of a pipeline, there are very few use
cases for an active link to be mandatory only if links exist at all. A
review of in-tree drivers confirms they all need an enabled link for
pads marked with the MEDIA_PAD_FL_MUST_CONNECT flag.
Expand the scope of the flag by rejecting pads that have no links at
all. This requires modifying the pipeline build code to add those pads
to the pipeline.
Cc: stable@vger.kernel.org # 6.1
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
The struct v4l2_subdev_client_capability was never actually documented,
only the capability flags were documented.
Add this.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Drop duplicated UAPI specific portions of the CCS (kernel) documentation
and fix a spelling error in UAPI documentation previously fixed in driver
documentation.
Also add references both ways.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
-----BEGIN PGP SIGNATURE-----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=KPPn
-----END PGP SIGNATURE-----
Merge tag 'media/v6.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media updates from Mauro Carvalho Chehab:
- v4l core: subdev frame interval now supports which field
- v4l kapi: moves and renames the init_cfg pad op to init_state as an
internal op.
- new sensor drivers: gc0308, gc2145, Avnet Alvium, ov64a40, tw9900
- new camera driver: STM32 DCMIPP
- s5p-mfc has gained MFC v12 support
- new ISP driver added to staging: Starfive
- new stateful encoder/decoded: Wave5 codec It is found on the J721S2
SoC, JH7100 SoC, ssd202d SoC. Etc.
- fwnode gained support for MIPI "DisCo for Imaging"
(https://www.mipi.org/specifications/mipi-disco-imaging)
- as usual, lots of cleanups, fixups and driver improvements.
* tag 'media/v6.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (309 commits)
media: i2c: thp7312: select CONFIG_FW_LOADER
media: i2c: mt9m114: use fsleep() in place of udelay()
media: videobuf2: core: Rename min_buffers_needed field in vb2_queue
media: i2c: thp7312: Store frame interval in subdev state
media: docs: uAPI: Fix documentation of 'which' field for routing ioctls
media: docs: uAPI: Expand error documentation for invalid 'which' value
media: docs: uAPI: Clarify error documentation for invalid 'which' value
media: v4l2-subdev: Store frame interval in subdev state
media: v4l2-subdev: Add which field to struct v4l2_subdev_frame_interval
media: v4l2-subdev: Turn .[gs]_frame_interval into pad operations
media: v4l: subdev: Move out subdev state lock macros outside CONFIG_MEDIA_CONTROLLER
media: s5p-mfc: DPB Count Independent of VIDIOC_REQBUF
media: s5p-mfc: Load firmware for each run in MFCv12.
media: s5p-mfc: Set context for valid case before calling try_run
media: s5p-mfc: Add support for DMABUF for encoder
media: s5p-mfc: Add support for UHD encoding.
media: s5p-mfc: Add support for rate controls in MFCv12
media: s5p-mfc: Add YV12 and I420 multiplanar format support
media: s5p-mfc: Add initial support for MFCv12
media: s5p-mfc: Rename IS_MFCV10 macro
...
The routing ioctls documentation incorrectly describes the 'which'
field, due to a bad copy & paste. Fix it.
Fixes: ea73eda508 ("media: Documentation: Add GS_ROUTING documentation")
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Multiple subdev ioctls that take a 'which' field do not document the
error returned when the field has an invalid value. Expand the
documentation to fix this.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Invalid values for the 'which' field of structures passed to multiple
subdev ioctls result in an EINVAL error being returned. The
documentation of the corresponding ioctls indicates this with sentences
such as the following:
the ``which`` field references a non-existing format
This is confusing. Clarify the documentation.
Suggested-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Due to a historical mishap, the v4l2_subdev_frame_interval structure
is the only part of the V4L2 subdev userspace API that doesn't contain a
'which' field. This prevents trying frame intervals using the subdev
'TRY' state mechanism.
Adding a 'which' field is simple as the structure has 8 reserved fields.
This would however break userspace as the field is currently set to 0,
corresponding to V4L2_SUBDEV_FORMAT_TRY, while the corresponding ioctls
currently operate on the 'ACTIVE' state. We thus need to add a new
subdev client cap, V4L2_SUBDEV_CLIENT_CAP_INTERVAL_USES_WHICH, to
indicate that userspace is aware of this new field.
All drivers that implement the subdev .get_frame_interval() and
.set_frame_interval() operations are updated to return -EINVAL when
operating on the TRY state, preserving the current behaviour.
While at it, fix a bad copy&paste in the documentation of the struct
v4l2_subdev_frame_interval_enum 'which' field.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de> # for imx-media
Reviewed-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com> # for tegra-video
Reviewed-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
The THP7312 is an external ISP from THine. As such, it implements a
large number of parameters to control all aspects of the image
processing. Many of those controls are already standard in V4L2, but
some are fairly device-specific.
Reserve a range of 32 controls for the device. The driver will implement
4 device-specific controls to start with, define and document them. 28
additional device-specific controls should be enough for future
development.
Co-developed-by: Paul Elder <paul.elder@ideasonboard.com>
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
The HDR10 standard compound controls were missing the corresponding
pointers in videodev2.h. Add these and document them.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Use one of the struct v4l2_create_buffers reserved bytes to report
the maximum possible number of buffers for the queue.
V4l2 framework set V4L2_BUF_CAP_SUPPORTS_MAX_NUM_BUFFERS flags in queue
capabilities so userland can know when the field is valid.
Does the same change in v4l2_create_buffers32 structure.
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Vegard Nossum writes:
This patch series replaces some instances of 'class:: toc-title' with
toctree's :caption: attribute, see the last patch in the series for some
more rationale/explanation.
"class:: toc-title" was a workaround for older Sphinx versions that are
no longer supported.
The canonical way to add a heading to the ToC is to use :caption:.
Do that.
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: linux-media@vger.kernel.org
Signed-off-by: Vegard Nossum <vegard.nossum@oracle.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/20231027081830.195056-10-vegard.nossum@oracle.com
The list of ioctls that set or clear this flag was garbled in the generator
output. Put in the proper text.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
The text is very, very old and predates /dev/mediaX devices, so the
reference to "media device" is today very confusing.
It also says that the ioctl is not supported by the driver, but a
driver may have multiple device nodes, some support a given ioctl,
and some don't.
Simplify the description: ENOTTY means that the ioctl is not supported
by the file descriptor.
Reported-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Split camera sensor documentation into user and kernel portions. This
should make it easier for the user space developers to find the relevant
documentation.
Also add a list of exemplary drivers and add imx219 driver to it, besides
those that were already mentioned.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Align lines for numbered list so that Sphinx produces an uniform output
for all list entries. Also indent paragraphs of such list entries for
consistency.
Also use ReST numbered list syntax for the entries.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Explain how the DV Timings API and the V4L2_EVENT_SOURCE_CHANGE
event work together to handle video source changes.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Create controls for Nuvoton NPCM video driver to support setting
capture mode of Video Capture/Differentiation (VCD) engine and getting
the count of HEXTILE rectangles that is compressed by Encoding
Compression Engine (ECE).
Signed-off-by: Marvin Lin <milkfafa@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Add HEXTILE compressed format which is defined in Remote Framebuffer
Protocol (RFC 6143, chapter 7.7.4 Hextile Encoding) and is used by
Encoding Compression Engine (ECE) present on Nuvoton NPCM SoCs.
Signed-off-by: Marvin Lin <milkfafa@gmail.com>
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Fix documentation for R13 and R33 low bits.
Signed-off-by: Suhrid Subramaniam <suhrid.subramaniam@mediatek.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
-----BEGIN PGP SIGNATURE-----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=yuz5
-----END PGP SIGNATURE-----
Merge tag 'media/v6.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media updates from Mauro Carvalho Chehab:
- new i2c drivers: ds90ub913, ds90ub953, ds90ub960, dw9719, ds90ub913
- new Intel IVSC MEI drivers
- some Mediatek platform drivers were moved to a common location
- Intel atomisp2 driver is now working with the main ov2680 driver. Due
to that, the atomisp2 ov2680 staging one was removed
- the bttv driver was finally converted to videobuf2 framework. This
was the last one upstream using videobuf version 1 core. We'll likely
remove the old videobuf framework on 6.7
- lots of improvements at atomisp driver: it now works with normal I2C
sensors. Several compile-mode dependecies to select between ISP2400
and ISP2401 are now solved in runtime
- a new ipu-bridge logic was added to work with IVSC MEI drivers
- venus driver gained better support for new VPU versions
- the v4l core async framework has gained lots of improvements and
cleanups
- lots of other cleanups, improvements and driver fixes
* tag 'media/v6.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (358 commits)
media: ivsc: Add ACPI dependency
media: bttv: convert to vb2
media: bttv: use audio defaults for winfast2000
media: bttv: refactor bttv_set_dma()
media: bttv: move vbi_skip/vbi_count out of buffer
media: bttv: remove crop info from bttv_buffer
media: bttv: remove tvnorm field from bttv_buffer
media: bttv: remove format field from bttv_buffer
media: bttv: move do_crop flag out of bttv_fh
media: bttv: copy vbi_fmt from bttv_fh
media: bttv: copy vid fmt/width/height from fh
media: bttv: radio use v4l2_fh instead of bttv_fh
media: bttv: replace BUG with WARN_ON
media: bttv: use video_drvdata to get bttv
media: i2c: rdacm21: Fix uninitialized value
media: coda: Remove duplicated include
media: vivid: fix the racy dev->radio_tx_rds_owner
media: i2c: ccs: Check rules is non-NULL
media: i2c: ds90ub960: Fix PLL config for 1200 MHz CSI rate
media: i2c: ds90ub953: Fix use of uninitialized variables
...
Add mention that successful VIDIOC_SUBDEV_G_ROUTING call will update
'num_routes' and remove mention about non-existing streams, which is
incorrect.
Fixes: ea73eda508 ("media: Documentation: Add GS_ROUTING documentation")
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Sakari Ailus