Here is the big set of USB and Thunderbolt changes for 6.10-rc1.
Nothing hugely earth-shattering, just constant forward progress for
hardware support of new devices and cleanups over the drivers.
Included in here are:
- Thunderbolt / USB 4 driver updates
- typec driver updates
- dwc3 driver updates
- gadget driver updates
- uss720 driver id additions and fixes (people use USB->arallel port
devices still!)
- onboard-hub driver rename and additions for new hardware
- xhci driver updates
- other small USB driver updates and additions for quirks and api
changes
All of these have been in linux-next for a while with no reported
problems.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZk4E7w8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+yn0kACgr3uvAWXvfb9R4vCpC65F4f49ZQwAoIkHQBPl
/5HdrlIIYW2OzdUixH3e
=e3pI
-----END PGP SIGNATURE-----
Merge tag 'usb-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB / Thunderbolt updates from Greg KH:
"Here is the big set of USB and Thunderbolt changes for 6.10-rc1.
Nothing hugely earth-shattering, just constant forward progress for
hardware support of new devices and cleanups over the drivers.
Included in here are:
- Thunderbolt / USB 4 driver updates
- typec driver updates
- dwc3 driver updates
- gadget driver updates
- uss720 driver id additions and fixes (people use USB->arallel port
devices still!)
- onboard-hub driver rename and additions for new hardware
- xhci driver updates
- other small USB driver updates and additions for quirks and api
changes
All of these have been in linux-next for a while with no reported
problems"
* tag 'usb-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (154 commits)
drm/bridge: aux-hpd-bridge: correct devm_drm_dp_hpd_bridge_add() stub
usb: fotg210: Add missing kernel doc description
usb: dwc3: core: Fix unused variable warning in core driver
usb: typec: tipd: rely on i2c_get_match_data()
usb: typec: tipd: fix event checking for tps6598x
usb: typec: tipd: fix event checking for tps25750
dt-bindings: usb: qcom,dwc3: fix interrupt max items
usb: fotg210: Use *-y instead of *-objs in Makefile
usb: phy: tegra: Replace of_gpio.h by proper one
usb: typec: ucsi: displayport: Fix potential deadlock
usb: typec: qcom-pmic-typec: split HPD bridge alloc and registration
usb: musc: Remove unused list 'buffers'
usb: dwc3: Wait unconditionally after issuing EndXfer command
usb: gadget: u_audio: Clear uac pointer when freed.
usb: gadget: u_audio: Fix race condition use of controls after free during gadget unbind.
dt-bindings: usb: dwc3: Add QDU1000 compatible
usb: core: Remove the useless struct usb_devmap which is just a bitmap
MAINTAINERS: Remove {ehci,uhci}-platform.c from ARM/VT8500 entry
USB: usb_parse_endpoint: ignore reserved bits
usb: xhci: compact 'trb_in_td()' arguments
...
- selftests: Add str*cmp tests (Ivan Orlov)
- __counted_by: provide UAPI for _le/_be variants (Erick Archer)
- Various strncpy deprecation refactors (Justin Stitt)
- stackleak: Use a copy of soon-to-be-const sysctl table (Thomas Weißschuh)
- UBSAN: Work around i386 -regparm=3 bug with Clang prior to version 19
- Provide helper to deal with non-NUL-terminated string copying
- SCSI: Fix older string copying bugs (with new helper)
- selftests: Consolidate string helper behavioral tests
- selftests: add memcpy() fortify tests
- string: Add additional __realloc_size() annotations for "dup" helpers
- LKDTM: Fix KCFI+rodata+objtool confusion
- hardening.config: Enable KCFI
-----BEGIN PGP SIGNATURE-----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=CgsW
-----END PGP SIGNATURE-----
Merge tag 'hardening-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull hardening updates from Kees Cook:
"The bulk of the changes here are related to refactoring and expanding
the KUnit tests for string helper and fortify behavior.
Some trivial strncpy replacements in fs/ were carried in my tree. Also
some fixes to SCSI string handling were carried in my tree since the
helper for those was introduce here. Beyond that, just little fixes
all around: objtool getting confused about LKDTM+KCFI, preparing for
future refactors (constification of sysctl tables, additional
__counted_by annotations), a Clang UBSAN+i386 crash fix, and adding
more options in the hardening.config Kconfig fragment.
Summary:
- selftests: Add str*cmp tests (Ivan Orlov)
- __counted_by: provide UAPI for _le/_be variants (Erick Archer)
- Various strncpy deprecation refactors (Justin Stitt)
- stackleak: Use a copy of soon-to-be-const sysctl table (Thomas
Weißschuh)
- UBSAN: Work around i386 -regparm=3 bug with Clang prior to
version 19
- Provide helper to deal with non-NUL-terminated string copying
- SCSI: Fix older string copying bugs (with new helper)
- selftests: Consolidate string helper behavioral tests
- selftests: add memcpy() fortify tests
- string: Add additional __realloc_size() annotations for "dup"
helpers
- LKDTM: Fix KCFI+rodata+objtool confusion
- hardening.config: Enable KCFI"
* tag 'hardening-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: (29 commits)
uapi: stddef.h: Provide UAPI macros for __counted_by_{le, be}
stackleak: Use a copy of the ctl_table argument
string: Add additional __realloc_size() annotations for "dup" helpers
kunit/fortify: Fix replaced failure path to unbreak __alloc_size
hardening: Enable KCFI and some other options
lkdtm: Disable CFI checking for perms functions
kunit/fortify: Add memcpy() tests
kunit/fortify: Do not spam logs with fortify WARNs
kunit/fortify: Rename tests to use recommended conventions
init: replace deprecated strncpy with strscpy_pad
kunit/fortify: Fix mismatched kvalloc()/vfree() usage
scsi: qla2xxx: Avoid possible run-time warning with long model_num
scsi: mpi3mr: Avoid possible run-time warning with long manufacturer strings
scsi: mptfusion: Avoid possible run-time warning with long manufacturer strings
fs: ecryptfs: replace deprecated strncpy with strscpy
hfsplus: refactor copy_name to not use strncpy
reiserfs: replace deprecated strncpy with scnprintf
virt: acrn: replace deprecated strncpy with strscpy
ubsan: Avoid i386 UBSAN handler crashes with Clang
ubsan: Remove 1-element array usage in debug reporting
...
This enables the SM6115 interconnect provider, to make it possible to
boot boards on this SoC.
-----BEGIN PGP SIGNATURE-----
iQJJBAABCAAzFiEEBd4DzF816k8JZtUlCx85Pw2ZrcUFAmY635MVHGFuZGVyc3Nv
bkBrZXJuZWwub3JnAAoJEAsfOT8Nma3FhE0P/jfhHlJDK00FGprgENnSXzIDq+S/
zrzgGMdiKBrTO8x7Pib1IcYoCrvavu2yx1gZLTfoFyk0Wy1DtEt0eXnNzF+q14so
KPuAsJ5hPbVeM+kQH5XkrGMFqCulWx55d/7yK0wJC8GWH2gctkFlGKUGxdYLuUtO
S00nafbqU7zBwIxvGW3gqBOzYU7Yjkx2rUzTWNXAEpvWxYwI1SPPRwmAa3LwB+9l
w16tz6d2BPdxRKujgXC7nJJbl99ARQjekvmoS3lL8oNKtCfUXDiOrAtr1vcfdsZZ
Kw57VdOLdhYSuDchZshNf7X1QakfV46AvvSfc7Ag3ffJ72d3XKTJONvZw7KSY56l
1y0/wBmAxlhL0+DtNeTTjqTef8dhVziF6BQNK5SV7x5J7o+sHU5e8i1CxGGWfntn
rFX7ak7RIAVmSu7sTM20tUN4zunJuzw3AtqK5OXac5L9EVDFC+x1K/DlQepDtBXN
tRjOjvDdA5EVw0dXZ8ayx+HeT5gVKJXmrjPK5eRNPzOINWkd+fK2SSCsADN0MdLU
4rxOELZqeLX1h1AbnIu0mBK0nDD3sb67YWraFBsFW5GeqUIVKPqczoliQ3JrrZ9x
8F9tuVpOFTbIpWjGHieXjgFq9zy4aMy3ilHk7Xz2xmhhe3NLGah0BtuxdvwgrTBU
xREPqC5v4NoLzU/B
=p20c
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=hUtR
-----END PGP SIGNATURE-----
Merge tag 'qcom-arm64-defconfig-for-6.10-2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/defconfig
One more Qualcomm Arm64 defconfig update for v6.10
This enables the SM6115 interconnect provider, to make it possible to
boot boards on this SoC.
* tag 'qcom-arm64-defconfig-for-6.10-2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
arm64: defconfig: select INTERCONNECT_QCOM_SM6115 as built-in
Link: https://lore.kernel.org/r/20240508021312.206121-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Add some stuff that got missed along the way:
- CONFIG_UNWIND_PATCH_PAC_INTO_SCS=y so SCS vs PAC is hardware
selectable.
- CONFIG_X86_KERNEL_IBT=y while a default, just be sure.
- CONFIG_CFI_CLANG=y globally.
- CONFIG_PAGE_TABLE_CHECK=y for userspace mapping sanity.
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Link: https://lore.kernel.org/r/20240501193709.make.982-kees@kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
please pull the following:
- Stefan enables the snd_bcm2835 module build to mimic what is done in
bcm2835_defconfig and improve build coverage and testing
-----BEGIN PGP SIGNATURE-----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=AU1I
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=WNMn
-----END PGP SIGNATURE-----
Merge tag 'arm-soc/for-6.10/defconfig-arm64' of https://github.com/Broadcom/stblinux into soc/defconfig
This pull request contains updates to the ARM64 defconfig file for 6.10,
please pull the following:
- Stefan enables the snd_bcm2835 module build to mimic what is done in
bcm2835_defconfig and improve build coverage and testing
* tag 'arm-soc/for-6.10/defconfig-arm64' of https://github.com/Broadcom/stblinux:
arm64: defconfig: build snd_bcm2835 as module
Link: https://lore.kernel.org/r/20240429213703.2327834-1-florian.fainelli@broadcom.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Enable CONFIG_INTERCONNECT_QCOM_SM6115 as built-in to enable the
interconnect driver for the SoC used on Qualcomm Robotics RB2 board.
Building as built-in is required as on this platform interconnects are
required to bring up the console.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240424-enable-sm6115-icc-v3-1-21c83be48f0e@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Ext4 security labels are enabled, as the expectation of setcap being
functional is widespread.
SC7280 display and GPU clock controllers are enabled, to make available
related functionality. The driver for the Novatek display panel found in
QCM6490 IDP is enabled. The X1E80100 sound card and reset-gpio drivers
are enabled to provide the necessary drivers for this. The regulator
driver providing VBUS power on a few different platforms is enabled.
ath12k is present on several recent platforms, so this is enabled as
well.
-----BEGIN PGP SIGNATURE-----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=Eliq
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=CgrU
-----END PGP SIGNATURE-----
Merge tag 'qcom-arm64-defconfig-for-6.10' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/defconfig
Qualcomm Arm64 Defconfig updates for v6.10
Ext4 security labels are enabled, as the expectation of setcap being
functional is widespread.
SC7280 display and GPU clock controllers are enabled, to make available
related functionality. The driver for the Novatek display panel found in
QCM6490 IDP is enabled. The X1E80100 sound card and reset-gpio drivers
are enabled to provide the necessary drivers for this. The regulator
driver providing VBUS power on a few different platforms is enabled.
ath12k is present on several recent platforms, so this is enabled as
well.
* tag 'qcom-arm64-defconfig-for-6.10' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
arm64: defconfig: enable REGULATOR_QCOM_USB_VBUS
arm64: defconfig: enable ext4 security labels
arm64: defconfig: qcom: enable X1E80100 sound card
arm64: defconfig: build ath12k as a module
arm64: defconfig: Enable sc7280 display and gpu clock controllers
arm64: defconfig: enable reset-gpio driver as module
arm64: defconfig: enable Novatek NT36672E DSI Panel driver
Link: https://lore.kernel.org/r/20240427162037.1431822-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Enable Tegra Security Engine which can accelerate various
AES and HASH algorithms on supported hardware.
Signed-off-by: Akhil R <akhilrajeev@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Enable the VBUS regulator used on Qualcomm platforms (RB1, RB2, RB5) to
supply VBUS voltage to the USB-C connector.
Reported-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240325-arm64-config-usb-vbus-v1-1-d14601f81d08@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Enable the sound machine driver for Qualcomm X1E80100 sound card, used
on several boards with X1E80100 (e.g. X1E80100 CRD).
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240403094422.15140-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Recently the VCHIQ driver which provides a kernel interface to the
BCM2835 VideoCore made a decent progress in staging. But the build
coverage is currently limited to bcm2835_defconfig (ARM 32 bit).
So build the most valueable driver which uses VCHIQ and enable
cinch audio support for Raspberry Pi on arm64.
Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
Link: https://lore.kernel.org/r/20240414132052.11811-1-wahrenst@gmx.net
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
The USBDP Phy is used by RK3588 to handle the Dual-Role USB3
controllers. The Phy also supports Displayport Alt-Mode, but
the necessary DRM driver has not yet been merged.
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://lore.kernel.org/r/20240408225109.128953-4-sebastian.reichel@collabora.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Qualcomm sm8550-qrd and sm8650-qrd boards have ath12k modules as part of
their on-board WCN7850 WLAN/BT packages. Enable the relevant driver in
defconfig.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Link: https://lore.kernel.org/r/20240325085756.13843-1-brgl@bgdev.pl
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Enable the SC7280 display and gpu clock controllers to enable display
support on the QCS6490 RB3gen2.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Link: https://lore.kernel.org/r/20240326-rb3gen2-dp-connector-v2-6-a9f1bc32ecaf@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The i.MX8M Plus has support for an HDMI transmitter. The
video is genereated by lcdif3, routed to the hdmi parallel
video interface, then fed to a DW HDMI bridge to support
up to 4K video output.
Signed-off-by: Adam Ford <aford173@gmail.com>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Tested-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Tested-by: Tommaso Merciai <tomm.merciai@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The onboard_usb_hub driver has been updated to support non-hub devices,
which has led to some renaming.
Update to the new name (ONBOARD_USB_DEV) accordingly.
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Signed-off-by: Javier Carrasco <javier.carrasco@wolfvision.net>
Link: https://lore.kernel.org/r/20240325-onboard_xvf3500-v8-4-29e3f9222922@wolfvision.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Enable the config for the Renesas DA9062 PMIC and the built-in RTC, GPIO
and ONKEY drivers as it is populated on the RZ/G2UL SMARC EVK
development board.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20240227130010.45361-1-biju.das.jz@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Enable the RZ/G2L display unit DRM drivers used on the RZ/{G2L,G2LC,V2L}
SMARC EVK development boards.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20240223123646.245655-1-biju.das.jz@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Qualcomm X1E80100-CRD board uses shared reset GPIOs for speakers: each
pair out of four speakers share the GPIO. Enable the reset-gpio driver
which handles such case seamlessly.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240227142725.625561-3-krzysztof.kozlowski@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Build the Novatek NT36672E DSI Panel driver as module
because it is used on Qualcomm qcm6490 idp board.
Signed-off-by: Ritesh Kumar <quic_riteshk@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240215103929.19357-2-quic_riteshk@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
* Reorganise the arm64 kernel VA space and add support for LPA2 (at
stage 1, KVM stage 2 was merged earlier) - 52-bit VA/PA address range
with 4KB and 16KB pages
* Enable Rust on arm64
* Support for the 2023 dpISA extensions (data processing ISA), host only
* arm64 perf updates:
- StarFive's StarLink (integrates one or more CPU cores with a shared
L3 memory system) PMU support
- Enable HiSilicon Erratum 162700402 quirk for HIP09
- Several updates for the HiSilicon PCIe PMU driver
- Arm CoreSight PMU support
- Convert all drivers under drivers/perf/ to use .remove_new()
* Miscellaneous:
- Don't enable workarounds for "rare" errata by default
- Clean up the DAIF flags handling for EL0 returns (in preparation for
NMI support)
- Kselftest update for ptrace()
- Update some of the sysreg field definitions
- Slight improvement in the code generation for inline asm I/O
accessors to permit offset addressing
- kretprobes: acquire regs via a BRK exception (previously done via a
trampoline handler)
- SVE/SME cleanups, comment updates
- Allow CALL_OPS+CC_OPTIMIZE_FOR_SIZE with clang (previously disabled
due to gcc silently ignoring -falign-functions=N)
-----BEGIN PGP SIGNATURE-----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=KTD/
-----END PGP SIGNATURE-----
Merge tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 updates from Catalin Marinas:
"The major features are support for LPA2 (52-bit VA/PA with 4K and 16K
pages), the dpISA extension and Rust enabled on arm64. The changes are
mostly contained within the usual arch/arm64/, drivers/perf, the arm64
Documentation and kselftests. The exception is the Rust support which
touches some generic build files.
Summary:
- Reorganise the arm64 kernel VA space and add support for LPA2 (at
stage 1, KVM stage 2 was merged earlier) - 52-bit VA/PA address
range with 4KB and 16KB pages
- Enable Rust on arm64
- Support for the 2023 dpISA extensions (data processing ISA), host
only
- arm64 perf updates:
- StarFive's StarLink (integrates one or more CPU cores with a
shared L3 memory system) PMU support
- Enable HiSilicon Erratum 162700402 quirk for HIP09
- Several updates for the HiSilicon PCIe PMU driver
- Arm CoreSight PMU support
- Convert all drivers under drivers/perf/ to use .remove_new()
- Miscellaneous:
- Don't enable workarounds for "rare" errata by default
- Clean up the DAIF flags handling for EL0 returns (in preparation
for NMI support)
- Kselftest update for ptrace()
- Update some of the sysreg field definitions
- Slight improvement in the code generation for inline asm I/O
accessors to permit offset addressing
- kretprobes: acquire regs via a BRK exception (previously done
via a trampoline handler)
- SVE/SME cleanups, comment updates
- Allow CALL_OPS+CC_OPTIMIZE_FOR_SIZE with clang (previously
disabled due to gcc silently ignoring -falign-functions=N)"
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (134 commits)
Revert "mm: add arch hook to validate mmap() prot flags"
Revert "arm64: mm: add support for WXN memory translation attribute"
Revert "ARM64: Dynamically allocate cpumasks and increase supported CPUs to 512"
ARM64: Dynamically allocate cpumasks and increase supported CPUs to 512
kselftest/arm64: Add 2023 DPISA hwcap test coverage
kselftest/arm64: Add basic FPMR test
kselftest/arm64: Handle FPMR context in generic signal frame parser
arm64/hwcap: Define hwcaps for 2023 DPISA features
arm64/ptrace: Expose FPMR via ptrace
arm64/signal: Add FPMR signal handling
arm64/fpsimd: Support FEAT_FPMR
arm64/fpsimd: Enable host kernel access to FPMR
arm64/cpufeature: Hook new identification registers up to cpufeature
docs: perf: Fix build warning of hisi-pcie-pmu.rst
perf: starfive: Only allow COMPILE_TEST for 64-bit architectures
MAINTAINERS: Add entry for StarFive StarLink PMU
docs: perf: Add description for StarFive's StarLink PMU
dt-bindings: perf: starfive: Add JH8100 StarLink PMU
perf: starfive: Add StarLink PMU support
docs: perf: Update usage for target filter of hisi-pcie-pmu
...
- Make PSTORE_RAM available by default on arm64 (Nícolas F. R. A. Prado)
- Allow for dynamic initialization in modular build (Guilherme G. Piccoli)
- Add missing allocation failure check (Kunwu Chan)
- Avoid duplicate memory zeroing (Christophe JAILLET)
- Avoid potential double-free during pstorefs umount
-----BEGIN PGP SIGNATURE-----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=xe9R
-----END PGP SIGNATURE-----
Merge tag 'pstore-v6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull pstore updates from Kees Cook:
- Make PSTORE_RAM available by default on arm64 (Nícolas F R A Prado)
- Allow for dynamic initialization in modular build (Guilherme G
Piccoli)
- Add missing allocation failure check (Kunwu Chan)
- Avoid duplicate memory zeroing (Christophe JAILLET)
- Avoid potential double-free during pstorefs umount
* tag 'pstore-v6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
pstore/zone: Don't clear memory twice
pstore/zone: Add a null pointer check to the psz_kmsg_read
efi: pstore: Allow dynamic initialization based on module parameter
arm64: defconfig: Enable PSTORE_RAM
pstore/ram: Register to module device table
pstore: inode: Only d_invalidate() is needed
Enable the cbmem driver and dependencies in order to support reading
cbmem entries from the coreboot table, which are used to store logs from
coreboot on arm64 Chromebooks, and provide useful information for
debugging the boot process on those devices.
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Link: https://lore.kernel.org/r/20240304-coreboot-defconfig-v1-1-02dc1940408f@collabora.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Enable the Qualcomm PBS driver to resolve the dependency from the Light
Pulse Generator (LED-driver) on modern Qualcomm platforms. Enable the
X1E multimedia clock controllers, to provide clocks for the various
multimedia blocks. Enable Global clock controller and interconnect
drivers for the QDU1000/QRU1000 platforms.
Enable the audio drivers and the Goodi Berlin touchscreen driver, used
on SM8650 QRD.
Enable the MAX20411 regulator driver drive the GPU rail on SA8295P.
Lastly mark the Qualcomm interconnect providers that feeds UART
instances as builtin, to ensure the console exists when userspace is
launched.
-----BEGIN PGP SIGNATURE-----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=FjXL
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=x7hX
-----END PGP SIGNATURE-----
Merge tag 'qcom-arm64-defconfig-for-6.9' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/defconfig
Qualcomm ARM64 defconfig updates for v6.9
Enable the Qualcomm PBS driver to resolve the dependency from the Light
Pulse Generator (LED-driver) on modern Qualcomm platforms. Enable the
X1E multimedia clock controllers, to provide clocks for the various
multimedia blocks. Enable Global clock controller and interconnect
drivers for the QDU1000/QRU1000 platforms.
Enable the audio drivers and the Goodi Berlin touchscreen driver, used
on SM8650 QRD.
Enable the MAX20411 regulator driver drive the GPU rail on SA8295P.
Lastly mark the Qualcomm interconnect providers that feeds UART
instances as builtin, to ensure the console exists when userspace is
launched.
* tag 'qcom-arm64-defconfig-for-6.9' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
arm64: defconfig: Enable QCOM PBS
arm64: deconfig: enable Goodix Berlin SPI touchscreen driver as module
arm64: defconfig: Enable X1E80100 multimedia clock controllers configs
arm64: defconfig: Enable GCC and interconnect for QDU1000/QRU1000
arm64: defconfig: enable WCD939x USBSS driver as module
arm64: defconfig: enable audio drivers for SM8650 QRD board
arm64: defconfig: Enable Qualcomm interconnect providers
arm64: defconfig: Enable MAX20411 regulator driver
Link: https://lore.kernel.org/r/20240225032456.481112-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
ext4 filesystem can mount ext2, so drop CONFIG_EXT2_FS to make builds a
bit faster. Drop also redundant CONFIG_EXT3_FS, because it just
selectes EXT4_FS.
Suggested-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240221155033.44160-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Enable support for the Rockchip HDMI/eDP Combo PHY, which is based on a
Samsung IP block. This is used by the RK3588 SoC family.
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Link: https://lore.kernel.org/r/20240219203725.283532-1-cristian.ciocaltea@collabora.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Enable PSTORE_RAM, that is the ramoops driver, in the defconfig, to
allow logging and retrieving panics and oopses to/from RAM automatically
for platforms that have a ramoops reserved memory node in DT.
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Reviewed-by: David Heidelberg <david@ixit.cz>
Link: https://lore.kernel.org/r/20240110210600.787703-3-nfraprado@collabora.com
Signed-off-by: Kees Cook <keescook@chromium.org>
- Disable obsolete board staging support in the Renesas ARM and ARM V7
multi-platform defconfigs,
- Enable support for the Renesas R-Car V4M (R8A779H0) SoC in the ARM64
defconfig.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQ9qaHoIs/1I4cXmEiKwlD9ZEnxcAUCZcYucgAKCRCKwlD9ZEnx
cFKJAQCpdfJuHtpm6sDIv6JWuVmmDMOHwRw7tQ5UNeYRZMXuHAEAt4R+6mYRTo4L
LCWTcwzprYeOnEO/4Oemnv3CTDiA6Ag=
=oJfk
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=BT6t
-----END PGP SIGNATURE-----
Merge tag 'renesas-arm-defconfig-for-v6.9-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into soc/defconfig
Renesas ARM defconfig updates for v6.9
- Disable obsolete board staging support in the Renesas ARM and ARM V7
multi-platform defconfigs,
- Enable support for the Renesas R-Car V4M (R8A779H0) SoC in the ARM64
defconfig.
* tag 'renesas-arm-defconfig-for-v6.9-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel:
arm64: defconfig: Enable R8A779H0 SoC
ARM: multi_v7_defconfig: Disable board staging
ARM: shmobile: defconfig: Disable staging
Link: https://lore.kernel.org/r/cover.1707487828.git.geert+renesas@glider.be
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
We typically enable support in defconfig for all architectural features
for which we can detect at runtime if the hardware actually supports
them.
Now that we have implemented support for LPA2 based 52-bit virtual
addressing in a way that should not impact 48-bit operation on non-LPA2
CPU, we can do the same, and enable 52-bit virtual addressing by
default.
Catalin adds:
Currently the "Virtual address space size" arch/arm64/Kconfig menu
entry sets different defaults for each page size. However, all are
overridden by the defconfig to 48 bits. Set the new default in
Kconfig and remove the defconfig line.
[ardb: squash follow-up fix from Catalin]
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20240214122845.2033971-86-ardb+git@google.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Add the QDU1000/QRU1000 GCC and interconnect drivers as built-in.
These are necessary for the Qualcomm QDU1000/QRU1000 platform to boot
to shell.
Signed-off-by: Komal Bajaj <quic_kbajaj@quicinc.com>
Acked-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240213095459.18402-1-quic_kbajaj@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Enable the i.MX8MP LDB driver used for display support of the i.MX8MP
LVDS interface.
Signed-off-by: Yannic Moog <y.moog@phytec.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Linus Torvalds