Instead of grouping all vendor extensions into the same riscv_isa_ext
that standard instructions use, create a struct
"riscv_isa_vendor_ext_data_list" that allows each vendor to maintain
their vendor extensions independently of the standard extensions.
xandespmu is currently the only vendor extension so that is the only
extension that is affected by this change.
An additional benefit of this is that the extensions of each vendor can
be conditionally enabled. A config RISCV_ISA_VENDOR_EXT_ANDES has been
added to allow for that.
Signed-off-by: Charlie Jenkins <charlie@rivosinc.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Andy Chiu <andy.chiu@sifive.com>
Tested-by: Yu Chien Peter Lin <peterlin@andestech.com>
Reviewed-by: Yu Chien Peter Lin <peterlin@andestech.com>
Link: https://lore.kernel.org/r/20240719-support_vendor_extensions-v3-1-0af7587bbec0@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
* Support for byte/half-word compare-and-exchange, emulated via LR/SC
loops.
* Support for Rust.
* Support for Zihintpause in hwprobe.
* Support for the PR_RISCV_SET_ICACHE_FLUSH_CTX prctl().
* Support for lockless lockrefs.
-----BEGIN PGP SIGNATURE-----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=YLoD
-----END PGP SIGNATURE-----
Merge tag 'riscv-for-linus-6.10-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V updates from Palmer Dabbelt:
- Add byte/half-word compare-and-exchange, emulated via LR/SC loops
- Support for Rust
- Support for Zihintpause in hwprobe
- Add PR_RISCV_SET_ICACHE_FLUSH_CTX prctl()
- Support lockless lockrefs
* tag 'riscv-for-linus-6.10-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (42 commits)
riscv: defconfig: Enable CONFIG_CLK_SOPHGO_CV1800
riscv: select ARCH_HAS_FAST_MULTIPLIER
riscv: mm: still create swiotlb buffer for kmalloc() bouncing if required
riscv: Annotate pgtable_l{4,5}_enabled with __ro_after_init
riscv: Remove redundant CONFIG_64BIT from pgtable_l{4,5}_enabled
riscv: mm: Always use an ASID to flush mm contexts
riscv: mm: Preserve global TLB entries when switching contexts
riscv: mm: Make asid_bits a local variable
riscv: mm: Use a fixed layout for the MM context ID
riscv: mm: Introduce cntx2asid/cntx2version helper macros
riscv: Avoid TLB flush loops when affected by SiFive CIP-1200
riscv: Apply SiFive CIP-1200 workaround to single-ASID sfence.vma
riscv: mm: Combine the SMP and UP TLB flush code
riscv: Only send remote fences when some other CPU is online
riscv: mm: Broadcast kernel TLB flushes only when needed
riscv: Use IPIs for remote cache/TLB flushes by default
riscv: Factor out page table TLB synchronization
riscv: Flush the instruction cache during SMP bringup
riscv: hwprobe: export Zihintpause ISA extension
riscv: misaligned: remove CONFIG_RISCV_M_MODE specific code
...
Implementations affected by SiFive errata CIP-1200 have a bug which
forces the kernel to always use the global variant of the sfence.vma
instruction. When affected by this errata, do not attempt to flush a
range of addresses; each iteration of the loop would actually flush the
whole TLB instead. Instead, minimize the overall number of sfence.vma
instructions.
Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Yunhui Cui <cuiyunhui@bytedance.com>
Link: https://lore.kernel.org/r/20240327045035.368512-9-samuel.holland@sifive.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
T-Head's memory attribute extension (XTheadMae) (non-compatible
equivalent of RVI's Svpbmt) is currently assumed for all T-Head harts.
However, QEMU recently decided to drop acceptance of guests that write
reserved bits in PTEs.
As XTheadMae uses reserved bits in PTEs and Linux applies the MAE errata
for all T-Head harts, this broke the Linux startup on QEMU emulations
of the C906 emulation.
This patch attempts to address this issue by testing the MAE-enable bit
in the th.sxstatus CSR. This CSR is available in HW and can be
emulated in QEMU.
This patch also makes the XTheadMae probing mechanism reliable, because
a test for the right combination of mvendorid, marchid, and mimpid
is not sufficient to enable MAE.
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Christoph Müllner <christoph.muellner@vrull.eu>
Link: https://lore.kernel.org/r/20240407213236.2121592-3-christoph.muellner@vrull.eu
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Use "ANDES" rather than "ANDESTECH" to unify the naming
convention with directory, file names, Kconfig options
and other definitions.
Signed-off-by: Yu Chien Peter Lin <peterlin@andestech.com>
Reviewed-by: Charles Ci-Jyun Wu <dminus@andestech.com>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Link: https://lore.kernel.org/r/20240222083946.3977135-2-peterlin@andestech.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Jisheng Zhang <jszhang@kernel.org> says:
Previously, we use alternative mechanism to dynamically patch
the CMO operations for THEAD C906/C910 during boot for performance
reason. But as pointed out by Arnd, "there is already a significant
cost in accessing the invalidated cache lines afterwards, which is
likely going to be much higher than the cost of an indirect branch".
And indeed, there's no performance difference with GMAC and EMMC per
my test on Sipeed Lichee Pi 4A board.
Use riscv_nonstd_cache_ops for THEAD C906/C910 CMO to simplify
the alternative code, and to acchieve Arnd's goal -- "I think
moving the THEAD ops at the same level as all nonstandard operations
makes sense, but I'd still leave CMO as an explicit fast path that
avoids the indirect branch. This seems like the right thing to do both
for readability and for platforms on which the indirect branch has a
noticeable overhead."
To make bisect easy, I use two patches here: patch1 does the conversion
which just mimics current CMO behavior via. riscv_nonstd_cache_ops, I
assume no functionalities changes. patch2 uses T-HEAD PA based CMO
instructions so that we don't need to covert PA to VA.
* b4-shazam-merge:
riscv: errata: thead: use pa based instructions for CMO
riscv: errata: thead: use riscv_nonstd_cache_ops for CMO
Link: https://lore.kernel.org/r/20231114143338.2406-1-jszhang@kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
T-HEAD CPUs such as C906/C910/C920 support phy address based CMO, use
them so that we don't need to convert to virt address.
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Reviewed-by: Guo Ren <guoren@kernel.org>
Link: https://lore.kernel.org/r/20231114143338.2406-3-jszhang@kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Previously, we use alternative mechanism to dynamically patch
the CMO operations for THEAD C906/C910 during boot for performance
reason. But as pointed out by Arnd, "there is already a significant
cost in accessing the invalidated cache lines afterwards, which is
likely going to be much higher than the cost of an indirect branch".
And indeed, there's no performance difference with GMAC and EMMC per
my test on Sipeed Lichee Pi 4A board.
Use riscv_nonstd_cache_ops for THEAD C906/C910 CMO to simplify
the alternative code, and to acchieve Arnd's goal -- "I think
moving the THEAD ops at the same level as all nonstandard operations
makes sense, but I'd still leave CMO as an explicit fast path that
avoids the indirect branch. This seems like the right thing to do both
for readability and for platforms on which the indirect branch has a
noticeable overhead."
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Tested-by: Emil Renner Berthing <emil.renner.berthing@canonical.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20231114143338.2406-2-jszhang@kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
We need to probe for IOCP only once during boot stage, as we were probing
for IOCP for all the stages this caused the below issue during module-init
stage,
[9.019104] Unable to handle kernel paging request at virtual address ffffffff8100d3a0
[9.027153] Oops [#1]
[9.029421] Modules linked in: rcar_canfd renesas_usbhs i2c_riic can_dev spi_rspi i2c_core
[9.037686] CPU: 0 PID: 90 Comm: udevd Not tainted 6.7.0-rc1+ #57
[9.043756] Hardware name: Renesas SMARC EVK based on r9a07g043f01 (DT)
[9.050339] epc : riscv_noncoherent_supported+0x10/0x3e
[9.055558] ra : andes_errata_patch_func+0x4a/0x52
[9.060418] epc : ffffffff8000d8c2 ra : ffffffff8000d95c sp : ffffffc8003abb00
[9.067607] gp : ffffffff814e25a0 tp : ffffffd80361e540 t0 : 0000000000000000
[9.074795] t1 : 000000000900031e t2 : 0000000000000001 s0 : ffffffc8003abb20
[9.081984] s1 : ffffffff015b57c7 a0 : 0000000000000000 a1 : 0000000000000001
[9.089172] a2 : 0000000000000000 a3 : 0000000000000000 a4 : ffffffff8100d8be
[9.096360] a5 : 0000000000000001 a6 : 0000000000000001 a7 : 000000000900031e
[9.103548] s2 : ffffffff015b57d7 s3 : 0000000000000001 s4 : 000000000000031e
[9.110736] s5 : 8000000000008a45 s6 : 0000000000000500 s7 : 000000000000003f
[9.117924] s8 : ffffffc8003abd48 s9 : ffffffff015b1140 s10: ffffffff8151a1b0
[9.125113] s11: ffffffff015b1000 t3 : 0000000000000001 t4 : fefefefefefefeff
[9.132301] t5 : ffffffff015b57c7 t6 : ffffffd8b63a6000
[9.137587] status: 0000000200000120 badaddr: ffffffff8100d3a0 cause: 000000000000000f
[9.145468] [<ffffffff8000d8c2>] riscv_noncoherent_supported+0x10/0x3e
[9.151972] [<ffffffff800027e8>] _apply_alternatives+0x84/0x86
[9.157784] [<ffffffff800029be>] apply_module_alternatives+0x10/0x1a
[9.164113] [<ffffffff80008fcc>] module_finalize+0x5e/0x7a
[9.169583] [<ffffffff80085cd6>] load_module+0xfd8/0x179c
[9.174965] [<ffffffff80086630>] init_module_from_file+0x76/0xaa
[9.180948] [<ffffffff800867f6>] __riscv_sys_finit_module+0x176/0x2a8
[9.187365] [<ffffffff80889862>] do_trap_ecall_u+0xbe/0x130
[9.192922] [<ffffffff808920bc>] ret_from_exception+0x0/0x64
[9.198573] Code: 0009 b7e9 6797 014d a783 85a7 c799 4785 0717 0100 (0123) aef7
[9.205994] ---[ end trace 0000000000000000 ]---
This is because we called riscv_noncoherent_supported() for all the stages
during IOCP probe. riscv_noncoherent_supported() function sets
noncoherent_supported variable to true which has an annotation set to
"__ro_after_init" due to which we were seeing the above splat. Fix this by
probing for IOCP only once in boot stage by having a boolean variable
"done" which will be set to true upon IOCP probe in errata_probe_iocp()
and we bail out early if "done" is set to true.
While at it make return type of errata_probe_iocp() to void as we were
not checking the return value in andes_errata_patch_func().
Fixes: e021ae7f51 ("riscv: errata: Add Andes alternative ports")
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Yu Chien Peter Lin <peterlin@andestech.com>
Link: https://lore.kernel.org/r/20231130212647.108746-1-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Prabhakar <prabhakar.csengg@gmail.com> says:
From: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
non-coherent DMA support for AX45MP
====================================
On the Andes AX45MP core, cache coherency is a specification option so it
may not be supported. In this case DMA will fail. To get around with this
issue this patch series does the below:
1] Andes alternative ports is implemented as errata which checks if the
IOCP is missing and only then applies to CMO errata. One vendor specific
SBI EXT (ANDES_SBI_EXT_IOCP_SW_WORKAROUND) is implemented as part of
errata.
Below are the configs which Andes port provides (and are selected by
RZ/Five):
- ERRATA_ANDES
- ERRATA_ANDES_CMO
OpenSBI patch supporting ANDES_SBI_EXT_IOCP_SW_WORKAROUND SBI is now
part v1.3 release.
2] Andes AX45MP core has a Programmable Physical Memory Attributes (PMA)
block that allows dynamic adjustment of memory attributes in the runtime.
It contains a configurable amount of PMA entries implemented as CSR
registers to control the attributes of memory locations in interest.
OpenSBI configures the PMA regions as required and creates a reserve memory
node and propagates it to the higher boot stack.
Currently OpenSBI (upstream) configures the required PMA region and passes
this a shared DMA pool to Linux.
reserved-memory {
#address-cells = <2>;
#size-cells = <2>;
ranges;
pma_resv0@58000000 {
compatible = "shared-dma-pool";
reg = <0x0 0x58000000 0x0 0x08000000>;
no-map;
linux,dma-default;
};
};
The above shared DMA pool gets appended to Linux DTB so the DMA memory
requests go through this region.
3] We provide callbacks to synchronize specific content between memory and
cache.
4] RZ/Five SoC selects the below configs
- AX45MP_L2_CACHE
- DMA_GLOBAL_POOL
- ERRATA_ANDES
- ERRATA_ANDES_CMO
----------x---------------------x--------------------x---------------x----
* b4-shazam-merge:
soc: renesas: Kconfig: Select the required configs for RZ/Five SoC
cache: Add L2 cache management for Andes AX45MP RISC-V core
dt-bindings: cache: andestech,ax45mp-cache: Add DT binding documentation for L2 cache controller
riscv: mm: dma-noncoherent: nonstandard cache operations support
riscv: errata: Add Andes alternative ports
riscv: asm: vendorid_list: Add Andes Technology to the vendors list
Link: https://lore.kernel.org/r/20230818135723.80612-1-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Add required ports of the Alternative scheme for Andes CPU cores.
I/O Coherence Port (IOCP) provides an AXI interface for connecting external
non-caching masters, such as DMA controllers. IOCP is a specification
option and is disabled on the Renesas RZ/Five SoC due to this reason cache
management needs a software workaround.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Tested-by: Conor Dooley <conor.dooley@microchip.com> # tyre-kicking on a d1
Link: https://lore.kernel.org/r/20230818135723.80612-3-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Now that we're testing unaligned memory copy and making that
determination generically, there are no more users of the vendor
feature_probe_func(). While I think it's probably going to need to come
back, there are no users right now, so let's remove it until it's
needed.
Signed-off-by: Evan Green <evan@rivosinc.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20230818194136.4084400-3-evan@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
These cleanups came up as part of the discussion on the "riscv: Reduce
ARCH_KMALLOC_MINALIGN to 8" patch set, but that needs additional work
and thus will be delayed at least a cycle.
* b4-shazam-merge:
riscv: mm: mark noncoherent_supported as __ro_after_init
riscv: mm: mark CBO relate initialization funcs as __init
riscv: errata: thead: only set cbom size & noncoherent during boot
Link: https://lore.kernel.org/linux-riscv/20230526165958.908-1-jszhang@kernel.org/
Link: https://lore.kernel.org/r/20230614165504.532-1-jszhang@kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
The CBOM size and whether the HW is noncoherent is known and
determined during booting and won't change after that.
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20230614165504.532-2-jszhang@kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Early alternatives are called with the mmu disabled, and then should not
access any global symbols through the GOT since it requires relocations,
relocations that we do before but *virtually*. So only use medany code
model for this early code.
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Tested-by: Conor Dooley <conor.dooley@microchip.com> # booted on nezha & unmatched
Fixes: 39b3307294 ("riscv: Introduce CONFIG_RELOCATABLE")
Link: https://lore.kernel.org/r/20230526154630.289374-1-alexghiti@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
* Support for runtime detection of the Svnapot extension.
* Support for Zicboz when clearing pages.
* We've moved to GENERIC_ENTRY.
* Support for !MMU on rv32 systems.
* The linear region is now mapped via huge pages.
* Support for building relocatable kernels.
* Support for the hwprobe interface.
* Various fixes and cleanups throughout the tree.
-----BEGIN PGP SIGNATURE-----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=oxQd
-----END PGP SIGNATURE-----
Merge tag 'riscv-for-linus-6.4-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V updates from Palmer Dabbelt:
- Support for runtime detection of the Svnapot extension
- Support for Zicboz when clearing pages
- We've moved to GENERIC_ENTRY
- Support for !MMU on rv32 systems
- The linear region is now mapped via huge pages
- Support for building relocatable kernels
- Support for the hwprobe interface
- Various fixes and cleanups throughout the tree
* tag 'riscv-for-linus-6.4-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (57 commits)
RISC-V: hwprobe: Explicity check for -1 in vdso init
RISC-V: hwprobe: There can only be one first
riscv: Allow to downgrade paging mode from the command line
dt-bindings: riscv: add sv57 mmu-type
RISC-V: hwprobe: Remove __init on probe_vendor_features()
riscv: Use --emit-relocs in order to move .rela.dyn in init
riscv: Check relocations at compile time
powerpc: Move script to check relocations at compile time in scripts/
riscv: Introduce CONFIG_RELOCATABLE
riscv: Move .rela.dyn outside of init to avoid empty relocations
riscv: Prepare EFI header for relocatable kernels
riscv: Unconditionnally select KASAN_VMALLOC if KASAN
riscv: Fix ptdump when KASAN is enabled
riscv: Fix EFI stub usage of KASAN instrumented strcmp function
riscv: Move DTB_EARLY_BASE_VA to the kernel address space
riscv: Rework kasan population functions
riscv: Split early and final KASAN population functions
riscv: Use PUD/P4D/PGD pages for the linear mapping
riscv: Move the linear mapping creation in its own function
riscv: Get rid of riscv_pfn_base variable
...
probe_vendor_features() is now called from smp_callin(), which is not
__init code and runs during cpu hotplug events. Remove the
__init_or_module decoration from it and the functions it calls to avoid
walking into outer space.
Fixes: 62a31d6e38 ("RISC-V: hwprobe: Support probing of misaligned access performance")
Signed-off-by: Evan Green <evan@rivosinc.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20230420194934.1871356-1-evan@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Evan Green <evan@rivosinc.com> says:
There's been a bunch of off-list discussions about this, including at
Plumbers. The original plan was to do something involving providing an
ISA string to userspace, but ISA strings just aren't sufficient for a
stable ABI any more: in order to parse an ISA string users need the
version of the specifications that the string is written to, the version
of each extension (sometimes at a finer granularity than the RISC-V
releases/versions encode), and the expected use case for the ISA string
(ie, is it a U-mode or M-mode string). That's a lot of complexity to
try and keep ABI compatible and it's probably going to continue to grow,
as even if there's no more complexity in the specifications we'll have
to deal with the various ISA string parsing oddities that end up all
over userspace.
Instead this patch set takes a very different approach and provides a set
of key/value pairs that encode various bits about the system. The big
advantage here is that we can clearly define what these mean so we can
ensure ABI stability, but it also allows us to encode information that's
unlikely to ever appear in an ISA string (see the misaligned access
performance, for example). The resulting interface looks a lot like
what arm64 and x86 do, and will hopefully fit well into something like
ACPI in the future.
The actual user interface is a syscall, with a vDSO function in front of
it. The vDSO function can answer some queries without a syscall at all,
and falls back to the syscall for cases it doesn't have answers to.
Currently we prepopulate it with an array of answers for all keys and
a CPU set of "all CPUs". This can be adjusted as necessary to provide
fast answers to the most common queries.
An example series in glibc exposing this syscall and using it in an
ifunc selector for memcpy can be found at [1].
I was asked about the performance delta between this and something like
sysfs. I created a small test program and ran it on a Nezha D1
Allwinner board. Doing each operation 100000 times and dividing, these
operations take the following amount of time:
- open()+read()+close() of /sys/kernel/cpu_byteorder: 3.8us
- access("/sys/kernel/cpu_byteorder", R_OK): 1.3us
- riscv_hwprobe() vDSO and syscall: .0094us
- riscv_hwprobe() vDSO with no syscall: 0.0091us
These numbers get farther apart if we query multiple keys, as sysfs will
scale linearly with the number of keys, where the dedicated syscall
stays the same. To frame these numbers, I also did a tight
fork/exec/wait loop, which I measured as 4.8ms. So doing 4
open/read/close operations is a delta of about 0.3%, versus a single vDSO
call is a delta of essentially zero.
[1] https://patchwork.ozlabs.org/project/glibc/list/?series=343050
* b4-shazam-merge:
RISC-V: Add hwprobe vDSO function and data
selftests: Test the new RISC-V hwprobe interface
RISC-V: hwprobe: Support probing of misaligned access performance
RISC-V: hwprobe: Add support for RISCV_HWPROBE_BASE_BEHAVIOR_IMA
RISC-V: Add a syscall for HW probing
RISC-V: Move struct riscv_cpuinfo to new header
Link: https://lore.kernel.org/r/20230407231103.2622178-1-evan@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
This allows userspace to select various routines to use based on the
performance of misaligned access on the target hardware.
Rather than adding DT bindings, this change taps into the alternatives
mechanism used to probe CPU errata. Add a new function pointer alongside
the vendor-specific errata_patch_func() that probes for desirable errata
(otherwise known as "features"). Unlike the errata_patch_func(), this
function is called on each CPU as it comes up, so it can save
feature information per-CPU.
The T-head C906 has fast unaligned access, both as defined by GCC [1],
and in performing a basic benchmark, which determined that byte copies
are >50% slower than a misaligned word copy of the same data size (source
for this test at [2]):
bytecopy size f000 count 50000 offset 0 took 31664899 us
wordcopy size f000 count 50000 offset 0 took 5180919 us
wordcopy size f000 count 50000 offset 1 took 13416949 us
[1] https://github.com/gcc-mirror/gcc/blob/master/gcc/config/riscv/riscv.cc#L353
[2] https://pastebin.com/EPXvDHSW
Co-developed-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Evan Green <evan@rivosinc.com>
Reviewed-by: Heiko Stuebner <heiko.stuebner@vrull.eu>
Tested-by: Heiko Stuebner <heiko.stuebner@vrull.eu>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Paul Walmsley <paul.walmsley@sifive.com>
Link: https://lore.kernel.org/r/20230407231103.2622178-5-evan@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Alternatives are used for both errata and cpufeatures. Use a more
generic name, 'patch_id', as in "ID of code patching site", to
avoid confusion when alternatives are used for cpufeatures.
Signed-off-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Heiko Stuebner <heiko.stuebner@vrull.eu>
Link: https://lore.kernel.org/r/20230224154601.88163-5-ajones@ventanamicro.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
A define and a struct were introduced with commit 6f4eea9046
("riscv: Introduce alternative mechanism to apply errata solution"),
which introduced alternatives to RISC-V. The define is used for
an arbitrary string length, specific to sifive errata, so just use
the number directly there instead. The struct has never been used,
so remove it.
Signed-off-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Heiko Stuebner <heiko.stuebner@vrull.eu>
Link: https://lore.kernel.org/r/20230224154601.88163-4-ajones@ventanamicro.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Now that the text to patch is located using a relative offset from the
alternative entry, the text address should be computed without applying
the kernel mapping offset, both before and after VM setup.
Fixes: 8d23e94a44 ("riscv: switch to relative alternative entries")
Signed-off-by: Samuel Holland <samuel@sholland.org>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Guo Ren <guoren@kernel.org>
Reviewed-by: Jisheng Zhang <jszhang@kernel.org>
Tested-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20230212021534.59121-2-samuel@sholland.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Instead of using absolute addresses for both the old instrucions and
the alternative instructions, use offsets relative to the alt_entry
values. So this not only cuts the size of the alternative entry, but
also meets the prerequisite for patching alternatives in the vDSO,
since absolute alternative entries are subject to dynamic relocation,
which is incompatible with the vDSO building.
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20230128172856.3814-10-jszhang@kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
With the T-HEAD C9XX cores being designed before or during the ratification
to the SSCOFPMF extension, it implements functionality very similar but
not equal to it.
It implements overflow handling and also some privilege-mode filtering.
While SSCOFPMF supports this for all modes, the C9XX only implements the
filtering for M-mode and S-mode but not user-mode.
So add some adaptions to allow the C9XX to still handle
its PMU through the regular SBI PMU interface instead of defining new
interfaces or drivers.
To work properly, this requires a matching change in SBI, though the actual
interface between kernel and SBI does not change.
The main differences are a the overflow CSR and irq number.
As the reading of the overflow-csr is in the hot-path during irq handling,
use an errata and alternatives to not introduce new conditionals there.
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/all/20221011231841.2951264-2-heiko@sntech.de/
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Heiko Stuebner <heiko@sntech.de> says:
As noted by some people, some parts of the recently added extensions
(svpbmt, zicbom) + t-head errata could use some styling upgrades.
So this series provides these.
changes in v2:
- add patch also converting cpufeature probe to BIT()
- update commit message in patch1 (Conor)
Heiko Stuebner (5):
riscv: cleanup svpbmt cpufeature probing
riscv: drop some idefs from CMO initialization
riscv: use BIT() macros in t-head errata init
riscv: use BIT() marco for cpufeature probing
riscv: check for kernel config option in t-head memory types errata
arch/riscv/errata/thead/errata.c | 14 ++++++-----
arch/riscv/include/asm/cacheflush.h | 2 ++
arch/riscv/kernel/cpufeature.c | 39 ++++++++++++-----------------
3 files changed, 26 insertions(+), 29 deletions(-)
Link: https://lore.kernel.org/r/20220905111027.2463297-1-heiko@sntech.de
* b4-shazam-merge:
riscv: check for kernel config option in t-head memory types errata
riscv: use BIT() marco for cpufeature probing
riscv: use BIT() macros in t-head errata init
riscv: drop some idefs from CMO initialization
riscv: cleanup svpbmt cpufeature probing
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
The t-head variant of page-based memory types should also check first
for the enabled kernel config option.
Fixes: a35707c3d8 ("riscv: add memory-type errata for T-Head")
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Guo Ren <guoren@kernel.org>
Link: https://lore.kernel.org/r/20220905111027.2463297-6-heiko@sntech.de
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Wrapping things in #ifdefs makes the code harder to read
while we also have IS_ENABLED() macros to do this in regular code
and the extension detection is not _that_ runtime critical.
So define a stub for riscv_noncoherent_supported() in the
non-CONFIG_RISCV_DMA_NONCOHERENT case and move the code to
us IS_ENABLED.
Suggested-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Guo Ren <guoren@kernel.org>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Link: https://lore.kernel.org/r/20220905111027.2463297-3-heiko@sntech.de
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
This fixes two issues: I truncated the warning's hart ID when porting to
the 64-bit hart ID code, and the original code's warning handling could
fire on an uninitialized hart ID.
The biggest change here is that riscv_cbom_block_size is no longer
initialized, as IMO the default isn't sane: there's nothing in the ISA
that mandates any specific cache block size, so falling back to one will
just silently produce the wrong answer on some systems. This also
changes the probing order so the cache block size is known before
enabling Zicbom support.
CC: stable@vger.kernel.org
CC: Andrew Jones <ajones@ventanamicro.com>
CC: Heiko Stuebner <heiko@sntech.de>
CC: Atish Patra <atishp@rivosinc.com>
Fixes: 3aefb2ee5b ("riscv: implement Zicbom-based CMO instructions + the t-head variant")
Fixes: 1631ba1259 ("riscv: Add support for non-coherent devices using zicbom extension")
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
[Conor: fixed the redefinition errors]
Tested-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20220912224800.998121-1-mail@conchuod.ie
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
This series is based on the alternatives changes done in my svpbmt
series and thus also depends on Atish's isa-extension parsing series.
It implements using the cache-management instructions from the Zicbom-
extension to handle cache flush, etc actions on platforms needing them.
SoCs using cpu cores from T-Head like the Allwinne D1 implement a
different set of cache instructions. But while they are different,
instructions they provide the same functionality, so a variant can easly
hook into the existing alternatives mechanism on those.
[Palmer: Some minor fixups, including a RISCV_ISA_ZICBOM dependency on
MMU that's probably not strictly necessary. The Zicbom support will
trip up sparse for users that have new toolchains, I just sent a patch.]
Link: https://lore.kernel.org/all/20220706231536.2041855-1-heiko@sntech.de/
Link: https://lore.kernel.org/linux-sparse/20220811033138.20676-1-palmer@rivosinc.com/T/#u
* palmer/riscv-zicbom:
riscv: implement cache-management errata for T-Head SoCs
riscv: Add support for non-coherent devices using zicbom extension
dt-bindings: riscv: document cbom-block-size
of: also handle dma-noncoherent in of_dma_is_coherent()
* Enabling the FPU is now a static_key.
* Improvements to the Svpbmt support.
* CPU topology bindings for a handful of systems.
* Support for systems with 64-bit hart IDs.
* Many settings have been enabled in the defconfig, including both
support for the StarFive systems and many of the Docker requirements.
There are also a handful of cleanups and improvements, like usual.
-----BEGIN PGP SIGNATURE-----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=v9hn
-----END PGP SIGNATURE-----
Merge tag 'riscv-for-linus-5.20-mw0' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V updates from Palmer Dabbelt:
- Enabling the FPU is now a static_key
- Improvements to the Svpbmt support
- CPU topology bindings for a handful of systems
- Support for systems with 64-bit hart IDs
- Many settings have been enabled in the defconfig, including both
support for the StarFive systems and many of the Docker requirements
There are also a handful of cleanups and improvements, as usual.
* tag 'riscv-for-linus-5.20-mw0' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (28 commits)
riscv: enable Docker requirements in defconfig
riscv: convert the t-head pbmt errata to use the __nops macro
riscv: introduce nops and __nops macros for NOP sequences
RISC-V: Add fast call path of crash_kexec()
riscv: mmap with PROT_WRITE but no PROT_READ is invalid
riscv/efi_stub: Add 64bit boot-hartid support on RV64
riscv: cpu: Add 64bit hartid support on RV64
riscv: smp: Add 64bit hartid support on RV64
riscv: spinwait: Fix hartid variable type
riscv: cpu_ops_sbi: Add 64bit hartid support on RV64
riscv: dts: sifive: "fix" pmic watchdog node name
riscv: dts: canaan: Add k210 topology information
riscv: dts: sifive: Add fu740 topology information
riscv: dts: sifive: Add fu540 topology information
riscv: dts: starfive: Add JH7100 CPU topology
RISC-V: Add CONFIG_{NON,}PORTABLE
riscv: config: enable SOC_STARFIVE in defconfig
riscv: dts: microchip: Add mpfs' topology information
riscv: Kconfig.socs: Add comments
riscv: Kconfig.erratas: Add comments
...
The T-Head C906 and C910 implement a scheme for handling
cache operations different from the generic Zicbom extension.
Add an errata for it next to the generic dma coherency ops.
Reviewed-by: Samuel Holland <samuel@sholland.org>
Tested-by: Samuel Holland <samuel@sholland.org>
Reviewed-by: Guo Ren <guoren@kernel.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20220706231536.2041855-5-heiko@sntech.de
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
The SiFive errata code contains code checking applicable erratas
vs. actually applied erratas to suggest missing erratas to the
user when their Kconfig options are not enabled.
In the main kernel image one can be quite sure that all available
erratas appear at least once, so that check will succeed.
On the other hand modules can very well not use any errata-relevant
code, so the newly added module-alternative support may also patch
the module code, but not touch SiFive-specific erratas at all.
So to restore the original behaviour don't warn when patching
modules. This will keep the warning if necessary for the main kernel
image but prevent spurious warnings for modules.
Of course having such a vendor-specific warning may not be needed at
all, as CONFIG_ERRATA_SIFIVE is selected by CONFIG_SOC_SIFIVE and the
individual erratas are default-y so disabling them requires
deliberate action anyway. But for now just restore the old behaviour.
Fixes: a8e910168b ("riscv: implement module alternatives")
Reported-by: Ron Economos <re@w6rz.net>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Tested-by: Ron Economos <re@w6rz.net>
Link: https://lore.kernel.org/r/20220608120849.1695191-1-heiko@sntech.de
Cc: stable@vger.kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Having a list of alternatives to check with a per-entry function pointer
to a check function is nice style-wise. But in case of early-alternatives
it can clash with the non-relocated kernel and the function pointer in
the list pointing to a completely wrong location.
This isn't an issue with one or two list entries, as in that case the
compiler seems to unroll the loop and even usage of the list structure
and then only does relative jumps into the check functions based on this.
When adding a third entry to either list though, the issue that was
hiding there from the beginning is triggered resulting a jump to a
memory address that isn't part of the kernel at all.
The list of features/erratas only contained an unused name and the
pointer to the check function, so an easy solution for the problem
is to just unroll the loop in code, dismantle the whole list structure
and just call the relevant check functions one by one ourself.
For the T-Head errata this includes moving the stage-check inside
the check functions.
The issue is only relevant for things that might be called for early-
alternatives (T-Head and possible future main extensions), so the
SiFive erratas were not affected from the beginning, as they got
an early return for early-alternatives in the original patchset.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Tested-by: Samuel Holland <samuel@sholland.org>
Link: https://lore.kernel.org/r/20220526205646.258337-6-heiko@sntech.de
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Some current cpus based on T-Head cores implement memory-types
way different than described in the svpbmt spec even going
so far as using PTE bits marked as reserved.
Add the T-Head vendor-id and necessary errata code to
replace the affected instructions.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Tested-by: Samuel Holland <samuel@sholland.org>
Link: https://lore.kernel.org/r/20220511192921.2223629-13-heiko@sntech.de
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
This allows alternatives to also be applied when loading modules
and follows the implementation of other architectures (e.g. arm64).
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Philipp Tomsich <philipp.tomsich@vrull.eu>
Link: https://lore.kernel.org/r/20220511192921.2223629-4-heiko@sntech.de
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Future features may need to be applied at a different
time during boot, so allow defining stages for alternatives
and handling them differently depending on the stage.
Also make the alternatives-location more flexible so that
future stages may provide their own location.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Philipp Tomsich <philipp.tomsich@vrull.eu>
Link: https://lore.kernel.org/r/20220511192921.2223629-3-heiko@sntech.de
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Right now the alternatives need to be explicitly enabled and
erratas are limited to SiFive ones.
We want to use alternatives not only for patching soc erratas,
but in the future also for handling different behaviour depending
on the existence of future extensions.
So move the core alternatives over to the kernel subdirectory
and move the CONFIG_RISCV_ALTERNATIVE to be a hidden symbol
which we expect relevant erratas and extensions to just select
if needed.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Philipp Tomsich <philipp.tomsich@vrull.eu>
Link: https://lore.kernel.org/r/20220511192921.2223629-2-heiko@sntech.de
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
The function pointer vendor_patch_func is only used during init, so
mark it as __initdata.
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
The errata_cip_453.o should be built only when the Kconfig
CONFIG_ERRATA_SIFIVE_CIP_453 is enabled.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Vincent <vincent.chen@sifive.com>
Fixes: 0e0d499251 ("riscv: enable SiFive errata CIP-453 and CIP-1200 Kconfig only if CONFIG_64BIT=y")
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
For certain SiFive CPUs, "sfence.vma addr" cannot exactly flush addr
from TLB in the particular cases. The details could be found here:
https://sifive.cdn.prismic.io/sifive/167a1a56-03f4-4615-a79e-b2a86153148f_FU740_errata_20210205.pdf
In order to ensure the functionality, this patch uses the Alternative
scheme to replace all "sfence.vma addr" with "sfence.vma" at runtime.
Signed-off-by: Vincent Chen <vincent.chen@sifive.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
Add sign extension to the $badaddr before addressing the instruction page
fault and instruction access fault to workaround the issue "cip-453".
To avoid affecting the existing code sequence, this patch will creates two
trampolines to add sign extension to the $badaddr. By the "alternative"
mechanism, these two trampolines will replace the original exception
handler of instruction page fault and instruction access fault in the
excp_vect_table. In this case, only the specific SiFive CPU core jumps to
the do_page_fault and do_trap_insn_fault through these two trampolines.
Other CPUs are not affected.
Signed-off-by: Vincent Chen <vincent.chen@sifive.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
Add required ports of the Alternative scheme for SiFive.
Signed-off-by: Vincent Chen <vincent.chen@sifive.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
