Set LOCKDEP_BITS to 16 and LOCKDEP_CHAINS_BITS to 17, since test
systems frequently run out of lockdep entries and lockdep chains.
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Currently only one PAI sampling event can be created and active
at any one time. The PMU device drivers store a pointer to this
event in their data structures even when the event is created
for counting and the PMU device driver reference to this counting
event is never needed.
Change this and assign the pointer to the PMU device driver
only when a sampling event is created.
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Acked-by: Sumanth Korikkar <sumanthk@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Even if pXd_leaf() API is defined globally, it's not clear on the retval,
and there are three types used (bool, int, unsigned log).
Always return a boolean for pXd_leaf() APIs.
Link: https://lkml.kernel.org/r/20240305043750.93762-11-peterx@redhat.com
Signed-off-by: Peter Xu <peterx@redhat.com>
Suggested-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Mike Rapoport (IBM) <rppt@kernel.org>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Konovalov <andreyknvl@gmail.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: "Aneesh Kumar K.V" <aneesh.kumar@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Kirill A. Shutemov <kirill@shutemov.name>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: "Naveen N. Rao" <naveen.n.rao@linux.ibm.com>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Yang Shi <shy828301@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
pud_large() is always defined as pud_leaf(). Merge their usages. Chose
pud_leaf() because pud_leaf() is a global API, while pud_large() is not.
Link: https://lkml.kernel.org/r/20240305043750.93762-9-peterx@redhat.com
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Konovalov <andreyknvl@gmail.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: "Aneesh Kumar K.V" <aneesh.kumar@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Kirill A. Shutemov <kirill@shutemov.name>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: "Naveen N. Rao" <naveen.n.rao@linux.ibm.com>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Yang Shi <shy828301@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
pmd_large() is always defined as pmd_leaf(). Merge their usages. Chose
pmd_leaf() because pmd_leaf() is a global API, while pmd_large() is not.
Link: https://lkml.kernel.org/r/20240305043750.93762-8-peterx@redhat.com
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Mike Rapoport (IBM) <rppt@kernel.org>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Konovalov <andreyknvl@gmail.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: "Aneesh Kumar K.V" <aneesh.kumar@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Kirill A. Shutemov <kirill@shutemov.name>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: "Naveen N. Rao" <naveen.n.rao@linux.ibm.com>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Yang Shi <shy828301@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
After commit 6326c26c15 ("s390: convert various pgalloc functions to use
ptdescs"), there are still some positions that use page->{lru, index}
instead of ptdesc->{pt_list, pt_index}. In order to make the use of
ptdesc->{pt_list, pt_index} clearer, it would be better to convert them as
well.
[zhengqi.arch@bytedance.com: fix build failure]
Link: https://lkml.kernel.org/r/20240305072154.26168-1-zhengqi.arch@bytedance.com
Link: https://lkml.kernel.org/r/04beaf3255056ffe131a5ea595736066c1e84756.1709541697.git.zhengqi.arch@bytedance.com
Signed-off-by: Qi Zheng <zhengqi.arch@bytedance.com>
Cc: Christian Borntraeger <borntraeger@linux.ibm.com>
Cc: Janosch Frank <frankja@linux.ibm.com>
Cc: Claudio Imbrenda <imbrenda@linux.ibm.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Mike Rapoport (IBM) <rppt@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Vishal Moola (Oracle) <vishal.moola@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Most architectures only support a single hardcoded page size. In order
to ensure that each one of these sets the corresponding Kconfig symbols,
change over the PAGE_SHIFT definition to the common one and allow
only the hardware page size to be selected.
Acked-by: Guo Ren <guoren@kernel.org>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Acked-by: Stafford Horne <shorne@gmail.com>
Acked-by: Johannes Berg <johannes@sipsolutions.net>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The relocation table is not expected to contain a zero-termination
entry. The existing check is likely a left-over from similar x86
code that uses zero-entries as delimiters. s390 does not have ones
and therefore the check could be avoided.
Suggested-by: Ilya Leoshkevich <iii@linux.ibm.com>
Acked-by: Sumanth Korikkar <sumanthk@linux.ibm.com>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Make the type of __vmlinux_relocs_64_start|end symbols as
char array, just like it is done for all other sections.
Function rescue_relocs() is simplified as result.
Suggested-by: Heiko Carstens <hca@linux.ibm.com>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Do not use vmlinux.image_size within kaslr_adjust_relocs() function
to calculate the upper relocation table boundary. Instead, make both
lower and upper boundaries the function input parameters.
Acked-by: Sumanth Korikkar <sumanthk@linux.ibm.com>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
The end of GOT is calculated dynamically on boot. The size of GOT
is calculated on build from the start and end of GOT. Avoid both
calculations and use the end of GOT directly.
Acked-by: Sumanth Korikkar <sumanthk@linux.ibm.com>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Naresh reported this build error on linux-next:
s390x-linux-gnu-ld: Unexpected GOT/PLT entries detected!
make[3]: *** [/builds/linux/arch/s390/boot/Makefile:87:
arch/s390/boot/vmlinux.syms] Error 1
make[3]: Target 'arch/s390/boot/bzImage' not remade because of errors.
The reason for the build error is an incorrect/incomplete assertion which
checks the size of the .got.plt section. Similar to x86 the size is either
zero or 24 bytes (three entries).
See commit 262b5cae67 ("x86/boot/compressed: Move .got.plt entries out of
the .got section") for more details. The three reserved/additional entries
for s390 are described in chapter 3.2.2 of the s390x ABI [1] (thanks to
Andreas Krebbel for pointing this out!).
[1] https://github.com/IBM/s390x-abi/releases/download/v1.6.1/lzsabi_s390x.pdf
Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Reported-by: Linux Kernel Functional Testing <lkft@linaro.org>
Closes: https://lore.kernel.org/all/CA+G9fYvWp8TY-fMEvc3UhoVtoR_eM5VsfHj3+n+kexcfJJ+Cvw@mail.gmail.com
Fixes: 30226853d6 ("s390: vmlinux.lds.S: explicitly handle '.got' and '.plt' sections")
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Nathan reported below building error:
=====
$ curl -LSso .config https://git.alpinelinux.org/aports/plain/community/linux-edge/config-edge.armv7
$ make -skj"$(nproc)" ARCH=arm CROSS_COMPILE=arm-linux-gnueabi- olddefconfig all
..
arm-linux-gnueabi-ld: arch/arm/kernel/machine_kexec.o: in function `arch_crash_save_vmcoreinfo':
machine_kexec.c:(.text+0x488): undefined reference to `vmcoreinfo_append_str'
====
On architecutres, like arm, s390, ppc, sh, function
arch_crash_save_vmcoreinfo() is located in machine_kexec.c and it can
only be compiled in when CONFIG_KEXEC_CORE=y.
That's not right because arch_crash_save_vmcoreinfo() is used to export
arch specific vmcoreinfo. CONFIG_VMCORE_INFO is supposed to control its
compiling in. However, CONFIG_VMVCORE_INFO could be independent of
CONFIG_KEXEC_CORE, e.g CONFIG_PROC_KCORE=y will select CONFIG_VMVCORE_INFO.
Or CONFIG_KEXEC/CONFIG_KEXEC_FILE is set while CONFIG_CRASH_DUMP is
not set, it will report linking error.
So, on arm, s390, ppc and sh, move arch_crash_save_vmcoreinfo out to
a new file vmcore_info.c. Let CONFIG_VMCORE_INFO decide if compiling in
arch_crash_save_vmcoreinfo().
[akpm@linux-foundation.org: remove stray newlines at eof]
Link: https://lkml.kernel.org/r/20240129135033.157195-3-bhe@redhat.com
Signed-off-by: Baoquan He <bhe@redhat.com>
Reported-by: Nathan Chancellor <nathan@kernel.org>
Closes: https://lore.kernel.org/all/20240126045551.GA126645@dev-arch.thelio-3990X/T/#u
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: Hari Bathini <hbathini@linux.ibm.com>
Cc: Klara Modin <klarasmodin@gmail.com>
Cc: Michael Kelley <mhklinux@outlook.com>
Cc: Pingfan Liu <piliu@redhat.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Yang Li <yang.lee@linux.alibaba.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Now crash codes under kernel/ folder has been split out from kexec
code, crash dumping can be separated from kexec reboot in config
items on s390 with some adjustments.
Here wrap up crash dumping codes with CONFIG_CRASH_DUMP ifdeffery.
Link: https://lkml.kernel.org/r/20240124051254.67105-10-bhe@redhat.com
Signed-off-by: Baoquan He <bhe@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: Hari Bathini <hbathini@linux.ibm.com>
Cc: Pingfan Liu <piliu@redhat.com>
Cc: Klara Modin <klarasmodin@gmail.com>
Cc: Michael Kelley <mhklinux@outlook.com>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Yang Li <yang.lee@linux.alibaba.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
- Fix invalid -EBUSY on ccw_device_start() which can lead to failing
device initialization
- Add missing multiplication by 8 in __iowrite64_copy() to get the
correct byte length before calling zpci_memcpy_toio()
- Various config updates
-----BEGIN PGP SIGNATURE-----
iQIzBAABCAAdFiEECMNfWEw3SLnmiLkZIg7DeRspbsIFAmXYvSsACgkQIg7DeRsp
bsIkmw/+JABfYGH1/z0E3g7PSUrsbQkRiINyzmsv57KmIzMVNAhQoYSWiRiCqjVs
/XB2u2vgkVSZL+29vJCd178MnKK/LiN7VavbmNrYJxpVmgSsM0cc/CjGGf71lh2b
z25YbmtXGOA6Dgg+1KY0sFouMDzCT82imvKj5dvE0+NB4PBevslNGdY7qZroUGXg
mcvAA44qkfv61TaaMkt7o/9Mz5SJZ6byR3kacz6twpyGfbIboeQqCkejovit/Yb2
IlqtbMoWkCmO0ULRr96Pl156Ja8guCYiGvTjjL51DDeLymkiN9z6lNblOqRy0GP6
+YZKtbU3vdmdaVgk1Bp/ez1frjeteLAFbhRejie39Wd9TibuJp00DouRLJRJnaep
PywZd82oyMv94x2fy+nC4aBb6MxiOmsl5I2z/IilU0+O0gfToEgAXUb/fRAFFr1H
1P/5jouS7mMpgaf9nHBWh740oOs5XJX8xGe9S8+BFLTElKnBbAEknQU+e5NOr39K
OjMxG9OSC4UqiodYFgJtbhqmLV6BWN3m3sY/6SWZep3JbyiDwKB7G2a/4Q5SvypU
3e5WTVdx9EuTRNgXtA7bkwnNt8XG9JubAhInlNAt29bSkIvt8YODDwPPSpMNMVhC
vzotbMAX/cuncX6jumO3qkqimIZ1oSBBUJgq5RmYuLMvGQz7RH8=
=RG5H
-----END PGP SIGNATURE-----
Merge tag 's390-6.8-3' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 fixes from Heiko Carstens:
- Fix invalid -EBUSY on ccw_device_start() which can lead to failing
device initialization
- Add missing multiplication by 8 in __iowrite64_copy() to get the
correct byte length before calling zpci_memcpy_toio()
- Various config updates
* tag 's390-6.8-3' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/cio: fix invalid -EBUSY on ccw_device_start
s390: use the correct count for __iowrite64_copy()
s390/configs: update default configurations
s390/configs: enable INIT_STACK_ALL_ZERO in all configurations
s390/configs: provide compat topic configuration target
LLVM moved their issue tracker from their own Bugzilla instance to GitHub
issues. While all of the links are still valid, they may not necessarily
show the most up to date information around the issues, as all updates
will occur on GitHub, not Bugzilla.
Another complication is that the Bugzilla issue number is not always the
same as the GitHub issue number. Thankfully, LLVM maintains this mapping
through two shortlinks:
https://llvm.org/bz<num> -> https://bugs.llvm.org/show_bug.cgi?id=<num>
https://llvm.org/pr<num> -> https://github.com/llvm/llvm-project/issues/<mapped_num>
Switch all "https://bugs.llvm.org/show_bug.cgi?id=<num>" links to the
"https://llvm.org/pr<num>" shortlink so that the links show the most up to
date information. Each migrated issue links back to the Bugzilla entry,
so there should be no loss of fidelity of information here.
Link: https://lkml.kernel.org/r/20240109-update-llvm-links-v1-3-eb09b59db071@kernel.org
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Acked-by: Fangrui Song <maskray@google.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Andrii Nakryiko <andrii@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Mykola Lysenko <mykolal@fb.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Add __tlb_remove_folio_pages(), which will remove multiple consecutive
pages that belong to the same large folio, instead of only a single page.
We'll be using this function when optimizing unmapping/zapping of large
folios that are mapped by PTEs.
We're using the remaining spare bit in an encoded_page to indicate that
the next enoced page in an array contains actually shifted "nr_pages".
Teach swap/freeing code about putting multiple folio references, and
delayed rmap handling to remove page ranges of a folio.
This extension allows for still gathering almost as many small folios as
we used to (-1, because we have to prepare for a possibly bigger next
entry), but still allows for gathering consecutive pages that belong to
the same large folio.
Note that we don't pass the folio pointer, because it is not required for
now. Further, we don't support page_size != PAGE_SIZE, it won't be
required for simple PTE batching.
We have to provide a separate s390 implementation, but it's fairly
straight forward.
Another, more invasive and likely more expensive, approach would be to use
folio+range or a PFN range instead of page+nr_pages. But, we should do
that consistently for the whole mmu_gather. For now, let's keep it simple
and add "nr_pages" only.
Note that it is now possible to gather significantly more pages: In the
past, we were able to gather ~10000 pages, now we can also gather ~5000
folio fragments that span multiple pages. A folio fragment on x86-64 can
span up to 512 pages (2 MiB THP) and on arm64 with 64k in theory 8192
pages (512 MiB THP). Gathering more memory is not considered something we
should worry about, especially because these are already corner cases.
While we can gather more total memory, we won't free more folio fragments.
As long as page freeing time primarily only depends on the number of
involved folios, there is no effective change for !preempt configurations.
However, we'll adjust tlb_batch_pages_flush() separately to handle corner
cases where page freeing time grows proportionally with the actual memory
size.
Link: https://lkml.kernel.org/r/20240214204435.167852-9-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Ryan Roberts <ryan.roberts@arm.com>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christian Borntraeger <borntraeger@linux.ibm.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Hocko <mhocko@suse.com>
Cc: "Naveen N. Rao" <naveen.n.rao@linux.ibm.com>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Yin Fengwei <fengwei.yin@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
We have two bits available in the encoded page pointer to store additional
information. Currently, we use one bit to request delay of the rmap
removal until after a TLB flush.
We want to make use of the remaining bit internally for batching of
multiple pages of the same folio, specifying that the next encoded page
pointer in an array is actually "nr_pages". So pass page + delay_rmap
flag instead of an encoded page, to handle the encoding internally.
Link: https://lkml.kernel.org/r/20240214204435.167852-6-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Ryan Roberts <ryan.roberts@arm.com>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christian Borntraeger <borntraeger@linux.ibm.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Hocko <mhocko@suse.com>
Cc: "Naveen N. Rao" <naveen.n.rao@linux.ibm.com>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Yin Fengwei <fengwei.yin@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
We want to make use of pte_next_pfn() outside of set_ptes(). Let's simply
define PFN_PTE_SHIFT, required by pte_next_pfn().
Link: https://lkml.kernel.org/r/20240129124649.189745-7-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Tested-by: Ryan Roberts <ryan.roberts@arm.com>
Reviewed-by: Mike Rapoport (IBM) <rppt@kernel.org>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Alexandre Ghiti <alexghiti@rivosinc.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christian Borntraeger <borntraeger@linux.ibm.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: David S. Miller <davem@davemloft.net>
Cc: Dinh Nguyen <dinguyen@kernel.org>
Cc: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Naveen N. Rao <naveen.n.rao@linux.ibm.com>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Russell King (Oracle) <linux@armlinux.org.uk>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Following patch will use ptdump_check_wx() regardless of CONFIG_DEBUG_WX,
so define it at all times on powerpc and s390 just like other
architectures. Though keep the WARN_ON_ONCE() only when CONFIG_DEBUG_WX
is set.
Link: https://lkml.kernel.org/r/07bfb04c7fec58e84413e91d2533581be357a696.1706610398.git.christophe.leroy@csgroup.eu
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Alexandre Ghiti <alexghiti@rivosinc.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: "Aneesh Kumar K.V (IBM)" <aneesh.kumar@kernel.org>
Cc: Borislav Petkov (AMD) <bp@alien8.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christian Borntraeger <borntraeger@linux.ibm.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Cc: Greg KH <greg@kroah.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: "Naveen N. Rao" <naveen.n.rao@linux.ibm.com>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Phong Tran <tranmanphong@gmail.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Steven Price <steven.price@arm.com>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
All architectures using the core ptdump functionality also implement
CONFIG_DEBUG_WX, and they all do it more or less the same way, with a
function called debug_checkwx() that is called by mark_rodata_ro(), which
is a substitute to ptdump_check_wx() when CONFIG_DEBUG_WX is set and a
no-op otherwise.
Refactor by centrally defining debug_checkwx() in linux/ptdump.h and call
debug_checkwx() immediately after calling mark_rodata_ro() instead of
calling it at the end of every mark_rodata_ro().
On x86_32, mark_rodata_ro() first checks __supported_pte_mask has _PAGE_NX
before calling debug_checkwx(). Now the check is inside the callee
ptdump_walk_pgd_level_checkwx().
On powerpc_64, mark_rodata_ro() bails out early before calling
ptdump_check_wx() when the MMU doesn't have KERNEL_RO feature. The check
is now also done in ptdump_check_wx() as it is called outside
mark_rodata_ro().
Link: https://lkml.kernel.org/r/a59b102d7964261d31ead0316a9f18628e4e7a8e.1706610398.git.christophe.leroy@csgroup.eu
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: "Aneesh Kumar K.V (IBM)" <aneesh.kumar@kernel.org>
Cc: Borislav Petkov (AMD) <bp@alien8.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christian Borntraeger <borntraeger@linux.ibm.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Cc: Greg KH <greg@kroah.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: "Naveen N. Rao" <naveen.n.rao@linux.ibm.com>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Phong Tran <tranmanphong@gmail.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Steven Price <steven.price@arm.com>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
When building with OBJDUMP=llvm-objdump, there are a series of warnings
from the section comparisons that arch/s390/boot/Makefile performs
between vmlinux and arch/s390/boot/vmlinux:
llvm-objdump: warning: section '.boot.preserved.data' mentioned in a -j/--section option, but not found in any input file
llvm-objdump: warning: section '.boot.data' mentioned in a -j/--section option, but not found in any input file
llvm-objdump: warning: section '.boot.preserved.data' mentioned in a -j/--section option, but not found in any input file
llvm-objdump: warning: section '.boot.data' mentioned in a -j/--section option, but not found in any input file
The warning is a little misleading, as these sections do exist in the
input files. It is really pointing out that llvm-objdump does not match
GNU objdump's behavior of respecting '-j' / '--section' in combination
with '-t' / '--syms':
$ s390x-linux-gnu-objdump -t -j .boot.data vmlinux.full
vmlinux.full: file format elf64-s390
SYMBOL TABLE:
0000000001951000 l O .boot.data 0000000000003000 sclp_info_sccb
00000000019550e0 l O .boot.data 0000000000000001 sclp_info_sccb_valid
00000000019550e2 g O .boot.data 0000000000001000 early_command_line
...
$ llvm-objdump -t -j .boot.data vmlinux.full
vmlinux.full: file format elf64-s390
SYMBOL TABLE:
0000000000100040 l O .text 0000000000000010 dw_psw
0000000000000000 l df *ABS* 0000000000000000 main.c
00000000001001b0 l F .text 00000000000000c6 trace_event_raw_event_initcall_level
0000000000100280 l F .text 0000000000000100 perf_trace_initcall_level
...
It may be possible to change llvm-objdump's behavior to match GNU
objdump's behavior but the difficulty of that task has not yet been
explored. The combination of '$(OBJDUMP) -t -j' is not common in the
kernel tree on a whole, so workaround this tool difference by grepping
for the sections in the full symbol table output in a similar manner to
the sed invocation. This results in no visible change for GNU objdump
users while fixing the warnings for OBJDUMP=llvm-objdump, further
enabling use of LLVM=1 for ARCH=s390 with versions of LLVM that have
support for s390 in ld.lld and llvm-objcopy.
Reported-by: Heiko Carstens <hca@linux.ibm.com>
Closes: https://lore.kernel.org/20240219113248.16287-C-hca@linux.ibm.com/
Link: https://github.com/ClangBuiltLinux/linux/issues/859
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Link: https://lore.kernel.org/r/20240220-s390-work-around-llvm-objdump-t-j-v1-1-47bb0366a831@kernel.org
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
The routine ar_translation() can be reached by both the instruction
intercept path (where the access registers had been loaded with the
guest register contents), and the MEM_OP ioctls (which hadn't).
Since this routine saves the current registers to vcpu->run,
this routine erroneously saves host registers into the guest space.
Introduce a boolean in the kvm_vcpu_arch struct to indicate whether
the registers contain guest contents. If they do (the instruction
intercept path), the save can be performed and the AR translation
is done just as it is today. If they don't (the MEM_OP path), the
AR can be read from vcpu->run without stashing the current contents.
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Reviewed-by: Nina Schoetterl-Glausch <nsg@linux.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Link: https://lore.kernel.org/r/20240220211211.3102609-2-farman@linux.ibm.com
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
The SCLP driver code masks off the last two bits of the parameter [1]
to determine if a read is required, but doesn't care about the
contents of those bits. Meanwhile, the KVM code that delivers
event interrupts masks off those two bits but sends both to the
guest, even if only one was specified by userspace [2].
This works for the driver code, but it means any nuances of those
bits gets lost. Use the event pending mask as an actual mask, and
only send the bit(s) that were specified in the pending interrupt.
[1] Linux: sclp_interrupt_handler() (drivers/s390/char/sclp.c:658)
[2] QEMU: service_interrupt() (hw/s390x/sclp.c:360..363)
Fixes: 0890ddea1a ("KVM: s390: protvirt: Add SCLP interrupt handling")
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Reviewed-by: Janosch Frank <frankja@linux.ibm.com>
Link: https://lore.kernel.org/r/20240205214300.1018522-1-farman@linux.ibm.com
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Message-Id: <20240205214300.1018522-1-farman@linux.ibm.com>
Now all callers of mm_counter() have a folio, convert mm_counter() to take
a folio. Saves a call to compound_head() hidden inside PageAnon().
Link: https://lkml.kernel.org/r/20240111152429.3374566-10-willy@infradead.org
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: David Hildenbrand <david@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Call pfn_swap_entry_folio() in ptep_zap_swap_entry() as preparation for
converting mm counter functions to take a folio.
Link: https://lkml.kernel.org/r/20240111152429.3374566-5-willy@infradead.org
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: David Hildenbrand <david@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Enable MHP_MEMMAP_ON_MEMORY to support "memmap on memory".
memory_hotplug.memmap_on_memory=true kernel parameter should be set in
kernel boot option to enable the feature.
Link: https://lkml.kernel.org/r/20240108132747.3238763-6-sumanthk@linux.ibm.com
Reviewed-by: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Signed-off-by: Sumanth Korikkar <sumanthk@linux.ibm.com>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Allocate memory map (struct pages array) from the hotplugged memory
range, rather than using system memory. The change addresses the issue
where standby memory, when configured to be much larger than online
memory, could potentially lead to ipl failure due to memory map
allocation from online memory. For example, 16MB of memory map
allocation is needed for a memory block size of 1GB and when standby
memory is configured much larger than online memory, this could lead to
ipl failure.
To address this issue, the solution involves introducing "memmap on
memory" using the vmem_altmap structure on s390. Architectures that
want to implement it should pass the altmap to the vmemmap_populate()
function and its associated callchain. This enhancement is discussed in
commit 4b94ffdc41 ("x86, mm: introduce vmem_altmap to augment
vmemmap_populate()")
Provide "memmap on memory" support for s390 by passing the altmap in
vmemmap_populate() and its callchain. The allocation path is described
as follows:
* When altmap is NULL in vmemmap_populate(), memory map allocation
occurs using the existing vmemmap_alloc_block_buf().
* When altmap is not NULL in vmemmap_populate(), memory map allocation
still uses vmemmap_alloc_block_buf(), but this function internally
calls altmap_alloc_block_buf().
For deallocation, the process is outlined as follows:
* When altmap is NULL in vmemmap_free(), memory map deallocation happens
through free_pages().
* When altmap is not NULL in vmemmap_free(), memory map deallocation
occurs via vmem_altmap_free().
While memory map allocation is primarily handled through the
self-contained memory map range, there might still be a small amount of
system memory allocation required for vmemmap pagetables. To mitigate
this impact, this feature will be limited to machines with EDAT1
support.
Link: https://lkml.kernel.org/r/20240108132747.3238763-3-sumanthk@linux.ibm.com
Reviewed-by: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Signed-off-by: Sumanth Korikkar <sumanthk@linux.ibm.com>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
It's a bit nicer than having multiple lines and will help if there's
another re-work since we'll only have to change one location.
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
The signature for __iowrite64_copy() requires the number of 64 bit
quantities, not bytes. Multiple by 8 to get to a byte length before
invoking zpci_memcpy_toio()
Fixes: 87bc359b98 ("s390/pci: speed up __iowrite64_copy by using pci store block insn")
Acked-by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/0-v1-9223d11a7662+1d7785-s390_iowrite64_jgg@nvidia.com
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
There is already a generic union definition for vdso_data_store in the vdso
datapage header.
Use this definition to prevent code duplication.
Signed-off-by: Anna-Maria Behnsen <anna-maria@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Link: https://lore.kernel.org/r/20240219153939.75719-8-anna-maria@linutronix.de
vdso/datapage.h includes the architecture specific vdso/data.h header
file. So there is no need to do it also the other way round and including
the generic vdso/datapage.h header file inside the architecture specific
data.h header file.
Signed-off-by: Anna-Maria Behnsen <anna-maria@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Link: https://lore.kernel.org/r/20240219153939.75719-3-anna-maria@linutronix.de
Rename kvm_is_error_gpa() to kvm_is_gpa_in_memslot() and invert the
polarity accordingly in order to (a) free up kvm_is_error_gpa() to match
with kvm_is_error_{hva,page}(), and (b) to make it more obvious that the
helper is doing a memslot lookup, i.e. not simply checking for INVALID_GPA.
No functional change intended.
Link: https://lore.kernel.org/r/20240215152916.1158-9-paul@xen.org
Signed-off-by: Sean Christopherson <seanjc@google.com>
On s390, currently kernel uses the '-fPIE' compiler flag for compiling
vmlinux. This has a few problems:
- It uses dynamic symbols (.dynsym), for which the linker refuses to
allow more than 64k sections. This can break features which use
'-ffunction-sections' and '-fdata-sections', including kpatch-build
[1] and Function Granular KASLR.
- It unnecessarily uses GOT relocations, adding an extra layer of
indirection for many memory accesses.
Instead of using '-fPIE', resolve all the relocations at link time and
then manually adjust any absolute relocations (R_390_64) during boot.
This is done by first telling the linker to preserve all relocations
during the vmlinux link. (Note this is harmless: they are later
stripped in the vmlinux.bin link.)
Then use the 'relocs' tool to find all absolute relocations (R_390_64)
which apply to allocatable sections. The offsets of those relocations
are saved in a special section which is then used to adjust the
relocations during boot.
(Note: For some reason, Clang occasionally creates a GOT reference, even
without '-fPIE'. So Clang-compiled kernels have a GOT, which needs to
be adjusted.)
On my mostly-defconfig kernel, this reduces kernel text size by ~1.3%.
[1] https://github.com/dynup/kpatch/issues/1284
[2] https://gcc.gnu.org/pipermail/gcc-patches/2023-June/622872.html
[3] https://gcc.gnu.org/pipermail/gcc-patches/2023-August/625986.html
Compiler consideration:
Gcc recently implemented an optimization [2] for loading symbols without
explicit alignment, aligning with the IBM Z ELF ABI. This ABI mandates
symbols to reside on a 2-byte boundary, enabling the use of the larl
instruction. However, kernel linker scripts may still generate unaligned
symbols. To address this, a new -munaligned-symbols option has been
introduced [3] in recent gcc versions. This option has to be used with
future gcc versions.
Older Clang lacks support for handling unaligned symbols generated
by kernel linker scripts when the kernel is built without -fPIE. However,
future versions of Clang will include support for the -munaligned-symbols
option. When the support is unavailable, compile the kernel with -fPIE
to maintain the existing behavior.
In addition to it:
move vmlinux.relocs to safe relocation
When the kernel is built with CONFIG_KERNEL_UNCOMPRESSED, the entire
uncompressed vmlinux.bin is positioned in the bzImage decompressor
image at the default kernel LMA of 0x100000, enabling it to be executed
in-place. However, the size of .vmlinux.relocs could be large enough to
cause an overlap with the uncompressed kernel at the address 0x100000.
To address this issue, .vmlinux.relocs is positioned after the
.rodata.compressed in the bzImage. Nevertheless, in this configuration,
vmlinux.relocs will overlap with the .bss section of vmlinux.bin. To
overcome that, move vmlinux.relocs to a safe location before clearing
.bss and handling relocs.
Compile warning fix from Sumanth Korikkar:
When kernel is built with CONFIG_LD_ORPHAN_WARN and -fno-PIE, there are
several warnings:
ld: warning: orphan section `.rela.iplt' from
`arch/s390/kernel/head64.o' being placed in section `.rela.dyn'
ld: warning: orphan section `.rela.head.text' from
`arch/s390/kernel/head64.o' being placed in section `.rela.dyn'
ld: warning: orphan section `.rela.init.text' from
`arch/s390/kernel/head64.o' being placed in section `.rela.dyn'
ld: warning: orphan section `.rela.rodata.cst8' from
`arch/s390/kernel/head64.o' being placed in section `.rela.dyn'
Orphan sections are sections that exist in an object file but don't have
a corresponding output section in the final executable. ld raises a
warning when it identifies such sections.
Eliminate the warning by placing all .rela orphan sections in .rela.dyn
and raise an error when size of .rela.dyn is greater than zero. i.e.
Dont just neglect orphan sections.
This is similar to adjustment performed in x86, where kernel is built
with -fno-PIE.
commit 5354e84598 ("x86/build: Add asserts for unwanted sections")
[sumanthk@linux.ibm.com: rebased Josh Poimboeuf patches and move
vmlinux.relocs to safe location]
[hca@linux.ibm.com: merged compile warning fix from Sumanth]
Tested-by: Sumanth Korikkar <sumanthk@linux.ibm.com>
Acked-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Sumanth Korikkar <sumanthk@linux.ibm.com>
Link: https://lore.kernel.org/r/20240219132734.22881-4-sumanthk@linux.ibm.com
Link: https://lore.kernel.org/r/20240219132734.22881-5-sumanthk@linux.ibm.com
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
This 'relocs' tool is copied from the x86 version, ported for s390, and
greatly simplified to remove unnecessary features.
It reads vmlinux and outputs assembly to create a .vmlinux.relocs_64
section which contains the offsets of all R_390_64 relocations which
apply to allocatable sections.
Acked-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Sumanth Korikkar <sumanthk@linux.ibm.com>
Link: https://lore.kernel.org/r/20240219132734.22881-3-sumanthk@linux.ibm.com
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Gcc recently implemented an optimization [1] for loading symbols without
explicit alignment, aligning with the IBM Z ELF ABI. This ABI mandates
symbols to reside on a 2-byte boundary, enabling the use of the larl
instruction. However, kernel linker scripts may still generate unaligned
symbols. To address this, a new -munaligned-symbols option has been
introduced [2] in recent gcc versions.
[1] https://gcc.gnu.org/pipermail/gcc-patches/2023-June/622872.html
[2] https://gcc.gnu.org/pipermail/gcc-patches/2023-August/625986.html
However, when -munaligned-symbols is used in vdso code, it leads to the
following compilation error:
`.data.rel.ro.local' referenced in section `.text' of
arch/s390/kernel/vdso64/vdso64_generic.o: defined in discarded section
`.data.rel.ro.local' of arch/s390/kernel/vdso64/vdso64_generic.o
vdso linker script discards .data section to make it lightweight.
However, -munaligned-symbols in vdso object files references literal
pool and accesses _vdso_data. Hence, compile vdso code without
-munaligned-symbols. This means in the future, vdso code should deal
with alignment of newly introduced unaligned linker symbols.
Acked-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Sumanth Korikkar <sumanthk@linux.ibm.com>
Link: https://lore.kernel.org/r/20240219132734.22881-2-sumanthk@linux.ibm.com
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
When attempting to boot a kernel compiled with OBJCOPY=llvm-objcopy,
there is a crash right at boot:
Out of memory allocating 6d7800 bytes 8 aligned in range 0:20000000
Reserved memory ranges:
0000000000000000 a394c3c30d90cdaf DECOMPRESSOR
Usable online memory ranges (info source: sclp read info [3]):
0000000000000000 0000000020000000
Usable online memory total: 20000000 Reserved: a394c3c30d90cdaf Free: 0
Call Trace:
(sp:0000000000033e90 [<0000000000012fbc>] physmem_alloc_top_down+0x5c/0x104)
sp:0000000000033f00 [<0000000000011d56>] startup_kernel+0x3a6/0x77c
sp:0000000000033f60 [<00000000000100f4>] startup_normal+0xd4/0xd4
GNU objcopy does not have any issues. Looking at differences between the
object files in each build reveals info.bin does not get properly
populated with llvm-objcopy, which results in an empty .vmlinux.info
section.
$ file {gnu,llvm}-objcopy/arch/s390/boot/info.bin
gnu-objcopy/arch/s390/boot/info.bin: data
llvm-objcopy/arch/s390/boot/info.bin: empty
$ llvm-readelf --section-headers {gnu,llvm}-objcopy/arch/s390/boot/vmlinux | rg 'File:|\.vmlinux\.info|\.decompressor\.syms'
File: gnu-objcopy/arch/s390/boot/vmlinux
[12] .vmlinux.info PROGBITS 0000000000034000 035000 000078 00 WA 0 0 1
[13] .decompressor.syms PROGBITS 0000000000034078 035078 000b00 00 WA 0 0 1
File: llvm-objcopy/arch/s390/boot/vmlinux
[12] .vmlinux.info PROGBITS 0000000000034000 035000 000000 00 WA 0 0 1
[13] .decompressor.syms PROGBITS 0000000000034000 035000 000b00 00 WA 0 0 1
Ulrich points out that llvm-objcopy only copies sections marked as alloc
with a binary output target, whereas the .vmlinux.info section is only
marked as load. Add 'alloc' in addition to 'load', so that both objcopy
implementations work properly:
$ file {gnu,llvm}-objcopy/arch/s390/boot/info.bin
gnu-objcopy/arch/s390/boot/info.bin: data
llvm-objcopy/arch/s390/boot/info.bin: data
$ llvm-readelf --section-headers {gnu,llvm}-objcopy/arch/s390/boot/vmlinux | rg 'File:|\.vmlinux\.info|\.decompressor\.syms'
File: gnu-objcopy/arch/s390/boot/vmlinux
[12] .vmlinux.info PROGBITS 0000000000034000 035000 000078 00 WA 0 0 1
[13] .decompressor.syms PROGBITS 0000000000034078 035078 000b00 00 WA 0 0 1
File: llvm-objcopy/arch/s390/boot/vmlinux
[12] .vmlinux.info PROGBITS 0000000000034000 035000 000078 00 WA 0 0 1
[13] .decompressor.syms PROGBITS 0000000000034078 035078 000b00 00 WA 0 0 1
Closes: https://github.com/ClangBuiltLinux/linux/issues/1996
Link: 3c02cb7492
Suggested-by: Ulrich Weigand <ulrich.weigand@de.ibm.com>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Link: https://lore.kernel.org/r/20240216-s390-fix-boot-with-llvm-objcopy-v1-1-0ac623daf42b@kernel.org
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Found and fixed these while working on synchronizing the state
handling of zpci_dev's.
Signed-off-by: Gerd Bayer <gbayer@linux.ibm.com>
Reviewed-by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Centralize the removal so all paths are covered and the hotplug slot
will remain active until the device is really destroyed.
Signed-off-by: Gerd Bayer <gbayer@linux.ibm.com>
Reviewed-by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
There's a number of tasks that need the state of a zpci device
to be stable. Other tasks need to be synchronized as they change the state.
State changes could be generated by the system as availability or error
events, or be requested by the user through manipulations in sysfs.
Some other actions accessible through sysfs - like device resets - need the
state to be stable.
Unsynchronized state handling could lead to unusable devices. This has
been observed in cases of concurrent state changes through systemd udev
rules and DPM boot control. Some breakage can be provoked by artificial
tests, e.g. through repetitively injecting "recover" on a PCI function
through sysfs while running a "hotplug remove/add" in a loop through a
PCI slot's "power" attribute in sysfs. After a few iterations this could
result in a kernel oops.
So introduce a new mutex "state_lock" to guard the state property of the
struct zpci_dev. Acquire this lock in all task that modify the state:
- hotplug add and remove, through the PCI hotplug slot entry,
- avaiability events, as reported by the platform,
- error events, as reported by the platform,
- during device resets, explicit through sysfs requests or
implict through the common PCI layer.
Break out an inner _do_recover() routine out of recover_store() to
separte the necessary synchronizations from the actual manipulations of
the zpci_dev required for the reset.
With the following changes I was able to run the inject loops for hours
without hitting an error.
Signed-off-by: Gerd Bayer <gbayer@linux.ibm.com>
Reviewed-by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Since this guards only the Function Measurement Block, rename from
generic lock to fmb_lock in preparation to introduce another lock
that guards the state member
Signed-off-by: Gerd Bayer <gbayer@linux.ibm.com>
Reviewed-by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
When an event is started, read the current value of the
PAI counter. This value is saved in event::hw.prev_count.
When an event is stopped, this value is subtracted from the current
value read out at event stop time. The difference is the delta
of this counter.
Simplify the logic and read the event value every time the event is
started. This scheme is identical to other device drivers.
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Acked-by: Sumanth Korikkar <sumanthk@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
When the PAI events ALL_CRYPTO or ALL_NNPA are created
for system wide sampling, all PAI counters are monitored.
On each process schedule out, the values of all PAI counters
are investigated. Non-zero values are saved in the event's ring
buffer as raw data. This scheme expects the start value of each counter
to be reset to zero after each read operation performed by the PAI
PMU device driver. This allows for only one active event at any one
time as it relies on the start value of counters to be reset to zero.
Create a save area for each installed PAI XXXX_ALL event and save all
PAI counter values in this save area. Instead of clearing the
PAI counter lowcore area to zero after each read operation,
copy them from the lowcore area to the event's save area at process
schedule out time.
The delta of each PAI counter is calculated by subtracting the
old counter's value stored in the event's save area from the current
value stored in the lowcore area.
With this scheme, mulitple events of the PAI counters XXXX_ALL
can be handled at the same time. This will be addressed in a
follow-on patch.
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Acked-by: Sumanth Korikkar <sumanthk@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Provide various vector instruction inline assemblies for crc32
calculations.
This is just preparation to keep the conversion of the existing crc32
implementations from assembly to C small.
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Provide several one instruction fpu inline assemebles and use them to
implement the bogomips calculation in C like style. This is more for
illustration purposes on how kernel fpu code can be written in C.
This has the advantage that the author only has to take care of the
floating point instructions, but doesn't need to take care of general
purpose register allocation (if needed), and the semantics of all other
instructions not related to fpu.
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Move the s390 specific raid6 inline assemblies, make them generic, and
reuse them to implement the raid6 gen/xor implementation.
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
With csum_partial(), which reads all bytes into registers it is easy to
also implement csum_partial_copy_nocheck() which copies the buffer while
calculating its checksum.
For a 512 byte buffer this reduces the runtime by 19%. Compared to the old
generic variant (memcpy() + cksm instruction) runtime is reduced by 42%).
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Provide a faster variant of csum_partial() which uses vector registers
instead of the cksm instruction.
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Convert those callers of csum_partial() to use the cksm instruction,
which are either very early or in critical paths, like panic/dump, so
they don't have to rely on a working kernel infrastructure, which will
be introduced with a subsequent patch.
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
The first invocation of kernel_fpu_begin() after switching from user to
kernel context will save all vector registers, even if only parts of the
vector registers are used within the kernel fpu context. Given that save
and restore of all vector registers is quite expensive change the current
approach in several ways:
- Instead of saving and restoring all user registers limit this to those
registers which are actually used within an kernel fpu context.
- On context switch save all remaining user fpu registers, so they can be
restored when the task is rescheduled.
- Saving user registers within kernel_fpu_begin() is done without disabling
and enabling interrupts - which also slightly reduces runtime. In worst
case (e.g. interrupt context uses the same registers) this may lead to
the situation that registers are saved several times, however the
assumption is that this will not happen frequently, so that the new
method is faster in nearly all cases.
- save_user_fpu_regs() can still be called from all contexts and saves all
(or all remaining) user registers to a tasks ufpu user fpu save area.
Overall this reduces the time required to save and restore the user fpu
context for nearly all cases.
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
The kernel_fpu structure has a quite large size of 520 bytes. In order to
reduce stack footprint introduce several kernel fpu structures with
different and also smaller sizes. This way every kernel fpu user must use
the correct variant. A compile time check verifies that the correct variant
is used.
There are several users which use only 16 instead of all 32 vector
registers. For those users the new kernel_fpu_16 structure with a size of
only 266 bytes can be used.
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Let fpu_vlm() and fpu_vstm() macros return the number of registers saved /
loaded. This is helpful to read easy to read code in case there are several
subsequent fpu_vlm() or fpu_vstm() calls:
__vector128 *vxrs = ....
vxrs += fpu_vstm(0, 15, vxrs);
vxrs += fpu_vstm(16, 31, vxrs);
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
The anonymous union within struct fpu contains a floating point register
array and a vector register array. Given that the vector register is always
present remove the floating point register array. For configurations
without vector registers save the floating point register contents within
their corresponding vector register location.
This allows to remove the union, and also to simplify ptrace and perf code.
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
KVM was the only user which modified the regs pointer in struct fpu. Remove
the pointer and convert the rest of the core fpu code to directly access
the save area embedded within struct fpu.
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
KVM modifies the kernel fpu's regs pointer to its own area to implement its
custom version of preemtible kernel fpu context. With general support for
preemptible kernel fpu context there is no need for the extra complexity in
KVM code anymore.
Therefore convert KVM to a regular kernel fpu user. In particular this
means that all TIF_FPU checks can be removed, since the fpu register
context will never be changed by other kernel fpu users, and also the fpu
register context will be restored if a thread is preempted.
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Make the kernel fpu context preemptible. Add another fpu structure to the
thread_struct, and use it to save and restore the kernel fpu context if its
task uses fpu registers when it is preempted.
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Change type of fpu mask consistently from u32 to int. This is a
prerequisite to make the kernel fpu usage preemptible. Upcoming code
uses __atomic* ops which work with int pointers.
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Rename save_fpu_regs(), load_fpu_regs(), and struct thread_struct's fpu
member to save_user_fpu_regs(), load_user_fpu_regs(), and ufpu. This way
the function and variable names reflect for which context they are supposed
to be used.
This large and trivial conversion is a prerequisite for making the kernel
fpu usage preemptible.
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
The FPU state, as represented by the CIF_FPU flag reflects the FPU state of
a task, not the CPU it is running on. Therefore convert the flag to a
regular TIF flag.
This removes the magic in switch_to() where a save_fpu_regs() call for the
currently (previous) running task sets the per-cpu CIF_FPU flag, which is
required to restore FPU register contents of the next task, when it returns
to user space.
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Convert the rather large __kernel_fpu_begin()/__kernel_fpu_end() inline
assemblies to C. The C variant is much more readable, and this also allows
to get rid of the non-obvious usage of KERNEL_VXR_* constants within the
inline assemblies. E.g. "tmll %[m],6" correlates with the two bits set in
KERNEL_VXR_LOW. If the corresponding defines would be changed, the inline
assembles would break in a subtle way.
Therefore convert to C, use the proper defines, and allow the compiler to
generate code using the (hopefully) most efficient instructions.
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Instead of open-coding vlm and vstm inline assemblies at several locations,
provide an fpu_* function for each instruction, and use them in the new
save_vx_regs() and load_vx_regs() helper functions.
Note that "O" and "R" inline assembly operand modifiers are used in order
to pass the displacement and base register of the memory operands to the
existing VLM and VSTM macros. The two operand modifiers are not available
for clang. Therefore provide two variants of each inline assembly.
The clang variant always uses and clobbers general purpose register 1, like
in the previous inline assemblies, so it can be used as base register with
a zero displacement. This generates slightly less efficient code, but can
be removed as soon as clang has support for the used operand modifiers.
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Instead of open-coding lfpc, sfpc, and stfpc inline assemblies at
several locations, provide an fpu_* function for each instruction and
use the function instead.
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Deduplicate the 64 ld and std inline assemblies. Provide an fpu inline
assembly for both instructions, and use them in the new save_fp_regs()
and load_fp_regs() helper functions.
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
The only user of sfpc_safe() needs to read the new fpc register value
from memory before it is set with sfpc.
Avoid this indirection and use lfpc, which reads the new value from
memory. Also add the "fpu_" prefix to have a common name space for fpu
related inline assemblies, and provide memory access instrumentation.
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Add documentation which describes what the fpu helper functions are
good for, and why they should be used.
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Move, rename, and merge the fpu and vx header files. This way fpu header
files have a consistent naming scheme (fpu*.h).
Also get rid of the fpu subdirectory and move header files to asm
directory, so that all fpu and vx header files can be found at the same
location.
Merge internal.h header file into other header files, since the internal
helpers are used at many locations. so those helper functions are really
not internal.
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Address various checkpatch warnings, adjust whitespace, and try to increase
readability. This is just preparation, in order to avoid that subsequent
patches contain any distracting drive-by coding style changes.
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Use KERNEL_VXR_LOW instead of KERNEL_VXR_V0V7 for configurations without
vector registers in order to decide if floating point registers need to be
saved and restored.
Kernel FPU areas which use floating point registers are supposed to use the
KERNEL_FPR mask, however users may also open-code this and specify
KERNEL_VXR_V0V7 and/or KERNEL_VXR_V8V15. If only KERNEL_VXR_V8V15 is
specified floating point registers wouldn't be saved and restored. Improve
this and check for both bits.
There are currently no users where this would fix a bug.
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Remove the historic machine check handler code which validates registers.
Registers are automatically validated as part of the machine check handling
sequence (see Principles of Operation, Machine-Check Handling chapter,
Validation).
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
The v1, v2, v3, and v4 parameters of the RXB macro are a bit misleading,
since the reader can assume that the parameters always correlate with the
instructions format fields V1, V2, V3, and V4 as defined in the Principles
of Operation.
This is not the case for a couple of instructions, therefore improve the
description of the macro.
Suggested by Jens Remus, who also provided the improved description.
Suggested-by: Jens Remus <jremus@linux.ibm.com>
Reviewed-by: Jens Remus <jremus@linux.ibm.com>
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
The VLGV macro generates the VLGV instruction and has a vr parameter which
correlates to the V3 vector register field of the instruction (bits 12-15).
Due to its position in the VRS-c instruction format of the VLGV
instruction, this field correlates to the second bit of the RXB byte of the
instruction (see Principles of Operation, Chapter "Vector Overview and
Support Instructions").
Within the VLGV macro the MRXBOPC macro is used to generate the RXB field
of the instruction. The usage of the MRXBOPC macro is incorrect, since the
vector register number is passed as third parameter (which correlates to
the first bit of the RXB byte), while it should be passed as fourth
parameter (second bit of the RXB byte). In result an incorrect instruction
would be generated if the VLGV macro would be used for vector register
numbers larger than 15.
Fix this and pass the vector register number as fourth parameter.
Currently there are no users within the kernel which use the macro in a way
that broken code would be generated.
Reviewed-by: Jens Remus <jremus@linux.ibm.com>
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Reviewed-by: Hendrik Brueckner <brueckner@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Fix virtual vs physical address confusion. This does not fix a bug
since virtual and physical address spaces are currently the same.
/proc/iomem should report the physical address ranges, so use __pa_symbol()
for resource registration, similar to other architectures.
Signed-off-by: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
When building 'ARCH=s390 defconfig compat.config' with GCC and
LD=ld.lld, there is an error when attempting to link the compat vDSO:
ld.lld: error: unknown emulation: elf_s390
make[4]: *** [arch/s390/kernel/vdso32/Makefile:48: arch/s390/kernel/vdso32/vdso32.so.dbg] Error 1
Much like clang, ld.lld only supports the 64-bit s390 emulation. Add a
dependency on not using LLD to CONFIG_COMPAT to avoid breaking the build
with this toolchain combination.
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Link: https://lore.kernel.org/r/20240214-s390-compat-lld-dep-v1-1-abf1f4b5e514@kernel.org
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Fix virtual vs physical address confusion. This does not fix a bug
since virtual and physical address spaces are currently the same.
Suggested-by: Janosch Frank <frankja@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Acked-by: Janosch Frank <frankja@linux.ibm.com>
Acked-by: Anthony Krowiak <akrowiak@linux.ibm.com>
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
When linking vdso64.so.dbg with ld.lld, there is a warning about not
finding _start for the starting address:
ld.lld: warning: cannot find entry symbol _start; not setting start address
Fix this by removing the unused ENTRY in both vdso linker scripts. See
commit e247172854 ("powerpc/vdso: Remove unused ENTRY in linker
scripts"), which solved the same problem for powerpc, for further details.
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Commit e21f8baf8d ("s390/bug: add entry size to the __bug_table section")
changed the __EMIT_BUG() inline assembly to emit mergeable __bug_table
entries. This is at least currently not needed, but causes problems with
the upcoming s390 ld.lld support:
ld.lld: error: drivers/nvme/host/fc.o:(__bug_table): writable SHF_MERGE section is not supported
Therefore revert the change for now.
Reported-by: Nathan Chancellor <nathan@kernel.org>
Closes: https://lore.kernel.org/all/20240207-s390-lld-and-orphan-warn-v1-0-8a665b3346ab@kernel.org/
Suggested-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
ld.bfd defaults to '-z notext' (although it is customizable with the
'--enable-textrel-check' configure option) but ld.lld defaults to '-z
text', which causes issues with building the kernel due to the presence
of dynamic relocations in sections that are not writable.
ld.lld: error: relocation R_390_64 cannot be used against local symbol; recompile with -fPIC
Add '-z notext' to avoid these errors, as this is expected, which
matches other architectures.
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Tested-by: Justin Stitt <justinstitt@google.com>
Reviewed-by: Fangrui Song <maskray@google.com>
Link: https://lore.kernel.org/r/20240207-s390-lld-and-orphan-warn-v1-11-8a665b3346ab@kernel.org
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Now that all sections have been properly accounted for in the s390
linker scripts, select CONFIG_ARCH_WANT_LD_ORPHAN_WARN so that
'--orphan-handling' is added to LDFLAGS to catch any future sections
that are added without being described in linker scripts.
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Tested-by: Justin Stitt <justinstitt@google.com>
Link: https://lore.kernel.org/r/20240207-s390-lld-and-orphan-warn-v1-10-8a665b3346ab@kernel.org
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
When building with CONFIG_LD_ORPHAN_WARN after selecting
CONFIG_ARCH_HAS_LD_ORPHAN_WARN, there are several series of warnings
from the various discardable sections that the kernel adds for build
purposes that are not needed at runtime:
s390-linux-ld: warning: orphan section `.export_symbol' from `arch/s390/boot/decompressor.o' being placed in section `.export_symbol'
s390-linux-ld: warning: orphan section `.discard.addressable' from `arch/s390/boot/decompressor.o' being placed in section `.discard.addressable'
s390-linux-ld: warning: orphan section `.modinfo' from `arch/s390/boot/decompressor.o' being placed in section `.modinfo'
include/asm-generic/vmlinux.lds.h has a macro for easily discarding
these sections across the kernel named COMMON_DISCARDS, use it to clear
up the warnings.
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Tested-by: Justin Stitt <justinstitt@google.com>
Link: https://lore.kernel.org/r/20240207-s390-lld-and-orphan-warn-v1-9-8a665b3346ab@kernel.org
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
When building with CONFIG_LD_ORPHAN_WARN after selecting
CONFIG_ARCH_HAS_LD_ORPHAN_WARN, there is a warning around the '.comment'
section for each file in arch/s390/boot
s390-linux-ld: warning: orphan section `.comment' from `arch/s390/boot/als.o' being placed in section `.comment'
s390-linux-ld: warning: orphan section `.comment' from `arch/s390/boot/startup.o' being placed in section `.comment'
s390-linux-ld: warning: orphan section `.comment' from `arch/s390/boot/physmem_info.o' being placed in section `.comment'
include/asm-generic/vmlinux.lds.h has a macro for required ELF sections
not related to debugging named ELF_DETAILS, use it to clear up the
warnings.
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Tested-by: Justin Stitt <justinstitt@google.com>
Link: https://lore.kernel.org/r/20240207-s390-lld-and-orphan-warn-v1-8-8a665b3346ab@kernel.org
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
When building with CONFIG_LD_ORPHAN_WARN after selecting
CONFIG_ARCH_HAS_LD_ORPHAN_WARN, there are several series of warnings for
each file in arch/s390/boot due to the boot linker script not handling
the DWARF debug sections:
s390-linux-ld: warning: orphan section `.debug_line' from `arch/s390/boot/head.o' being placed in section `.debug_line'
s390-linux-ld: warning: orphan section `.debug_info' from `arch/s390/boot/head.o' being placed in section `.debug_info'
s390-linux-ld: warning: orphan section `.debug_abbrev' from `arch/s390/boot/head.o' being placed in section `.debug_abbrev'
s390-linux-ld: warning: orphan section `.debug_aranges' from `arch/s390/boot/head.o' being placed in section `.debug_aranges'
s390-linux-ld: warning: orphan section `.debug_str' from `arch/s390/boot/head.o' being placed in section `.debug_str'
include/asm-generic/vmlinux.lds.h has a macro for DWARF debug sections
named DWARF_DEBUG, use it to clear up the warnings.
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Tested-by: Justin Stitt <justinstitt@google.com>
Reviewed-by: Fangrui Song <maskray@google.com>
Link: https://lore.kernel.org/r/20240207-s390-lld-and-orphan-warn-v1-7-8a665b3346ab@kernel.org
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
When building with CONFIG_LD_ORPHAN_WARN after selecting
CONFIG_ARCH_HAS_LD_ORPHAN_WARN, there are several warnings from
arch/s390/boot/head.o due to the unhandled presence of '.rela' sections:
s390-linux-ld: warning: orphan section `.rela.iplt' from `arch/s390/boot/head.o' being placed in section `.rela.dyn'
s390-linux-ld: warning: orphan section `.rela.head.text' from `arch/s390/boot/head.o' being placed in section `.rela.dyn'
s390-linux-ld: warning: orphan section `.rela.got' from `arch/s390/boot/head.o' being placed in section `.rela.dyn'
s390-linux-ld: warning: orphan section `.rela.data' from `arch/s390/boot/head.o' being placed in section `.rela.dyn'
s390-linux-ld: warning: orphan section `.rela.data.rel.ro' from `arch/s390/boot/head.o' being placed in section `.rela.dyn'
s390-linux-ld: warning: orphan section `.rela.iplt' from `arch/s390/boot/head.o' being placed in section `.rela.dyn'
s390-linux-ld: warning: orphan section `.rela.head.text' from `arch/s390/boot/head.o' being placed in section `.rela.dyn'
s390-linux-ld: warning: orphan section `.rela.got' from `arch/s390/boot/head.o' being placed in section `.rela.dyn'
s390-linux-ld: warning: orphan section `.rela.data' from `arch/s390/boot/head.o' being placed in section `.rela.dyn'
s390-linux-ld: warning: orphan section `.rela.data.rel.ro' from `arch/s390/boot/head.o' being placed in section `.rela.dyn'
These sections are unneeded for the decompressor and they are not
emitted in the binary currently. In a manner similar to other
architectures, coalesce the sections into '.rela.dyn' and ensure it is
zero sized, which is a safe/tested approach versus full discard.
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Tested-by: Justin Stitt <justinstitt@google.com>
Link: https://lore.kernel.org/r/20240207-s390-lld-and-orphan-warn-v1-6-8a665b3346ab@kernel.org
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
When building with CONFIG_LD_ORPHAN_WARN after selecting
CONFIG_ARCH_HAS_LD_ORPHAN_WARN, there is a warning about the presence of
an '.init.text' section in arch/s390/boot:
s390-linux-ld: warning: orphan section `.init.text' from `arch/s390/boot/sclp_early_core.o' being placed in section `.init.text'
arch/s390/boot/sclp_early_core.c includes a file from the main kernel
build, which picks up a usage of '__init' somewhere. For the
decompressed image, this section can just be coalesced into '.text'.
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Tested-by: Justin Stitt <justinstitt@google.com>
Link: https://lore.kernel.org/r/20240207-s390-lld-and-orphan-warn-v1-5-8a665b3346ab@kernel.org
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
When building with CONFIG_LD_ORPHAN_WARN after selecting
CONFIG_ARCH_HAS_LD_ORPHAN_WARN, there are some warnings around certain
ELF sections:
s390-linux-ld: warning: orphan section `.dynstr' from `arch/s390/kernel/head64.o' being placed in section `.dynstr'
s390-linux-ld: warning: orphan section `.dynamic' from `arch/s390/kernel/head64.o' being placed in section `.dynamic'
s390-linux-ld: warning: orphan section `.hash' from `arch/s390/kernel/head64.o' being placed in section `.hash'
s390-linux-ld: warning: orphan section `.gnu.hash' from `arch/s390/kernel/head64.o' being placed in section `.gnu.hash'
Explicitly keep those sections like other architectures when
CONFIG_RELOCATABLE is enabled, which is always true for s390.
[hca@linux.ibm.com: keep sections instead of discarding]
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Link: https://lore.kernel.org/r/20240207-s390-lld-and-orphan-warn-v1-4-8a665b3346ab@kernel.org
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
When building with CONFIG_LD_ORPHAN_WARN after selecting
CONFIG_ARCH_HAS_LD_ORPHAN_WARN, there are a lot of warnings around the
GOT and PLT sections:
s390-linux-ld: warning: orphan section `.plt' from `arch/s390/kernel/head64.o' being placed in section `.plt'
s390-linux-ld: warning: orphan section `.got' from `arch/s390/kernel/head64.o' being placed in section `.got'
s390-linux-ld: warning: orphan section `.got.plt' from `arch/s390/kernel/head64.o' being placed in section `.got.plt'
s390-linux-ld: warning: orphan section `.iplt' from `arch/s390/kernel/head64.o' being placed in section `.iplt'
s390-linux-ld: warning: orphan section `.igot.plt' from `arch/s390/kernel/head64.o' being placed in section `.igot.plt'
s390-linux-ld: warning: orphan section `.iplt' from `arch/s390/boot/head.o' being placed in section `.iplt'
s390-linux-ld: warning: orphan section `.igot.plt' from `arch/s390/boot/head.o' being placed in section `.igot.plt'
s390-linux-ld: warning: orphan section `.got' from `arch/s390/boot/head.o' being placed in section `.got'
Currently, only the '.got' section is actually emitted in the final
binary. In a manner similar to other architectures, put the '.got'
section near the '.data' section and coalesce the PLT sections,
checking that the final section is zero sized, which is a safe/tested
approach versus full discard.
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Tested-by: Justin Stitt <justinstitt@google.com>
Link: https://lore.kernel.org/r/20240207-s390-lld-and-orphan-warn-v1-3-8a665b3346ab@kernel.org
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
When building with CONFIG_LD_ORPHAN_WARN after selecting
CONFIG_ARCH_HAS_LD_ORPHAN_WARN, there are a lot of warnings around
'.data.rel' sections:
s390-linux-ld: warning: orphan section `.data.rel' from `kernel/sched/build_utility.o' being placed in section `.data.rel'
s390-linux-ld: warning: orphan section `.data.rel.local' from `kernel/sched/build_utility.o' being placed in section `.data.rel.local'
s390-linux-ld: warning: orphan section `.data.rel.ro' from `kernel/sched/build_utility.o' being placed in section `.data.rel.ro'
s390-linux-ld: warning: orphan section `.data.rel.ro.local' from `kernel/sched/build_utility.o' being placed in section `.data.rel.ro.local'
Describe these in vmlinux.lds.S so there is no more warning and the
sections are placed consistently between linkers.
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Tested-by: Justin Stitt <justinstitt@google.com>
Link: https://lore.kernel.org/r/20240207-s390-lld-and-orphan-warn-v1-2-8a665b3346ab@kernel.org
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
arch/s390/boot/vmlinux uses a different linker script and build rules
than the main vmlinux, so the '--orphan-handling' flag is not applied to
it. Add support for '--orphan-handling' so that all sections are
properly described in the linker script, which helps eliminate bugs
between linker implementations having different orphan section
heuristics.
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Tested-by: Justin Stitt <justinstitt@google.com>
Link: https://lore.kernel.org/r/20240207-s390-lld-and-orphan-warn-v1-1-8a665b3346ab@kernel.org
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Move the switch_to() implementation to process.c and use the generic
switch_to.h header file instead, like some other architectures.
This addresses also the oddity that the old switch_to() implementation
assigns the return value of __switch_to() to 'prev' instead of 'last',
like it should.
Remove also all includes of switch_to.h from C files, except process.c.
Acked-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
save_access_regs() and restore_access_regs() are only available by
including switch_to.h. This is done by a couple of C files, which have
nothing to do with switch_to(), but only need these functions.
Move both functions to a new header file and improve the implementation:
- Get rid of typedef
- Add memory access instrumentation support
- Use long displacement instructions lamy/stamy instead of lam/stam - all
current users end up with better code because of this
Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
We've had issues with gcc and 'asm goto' before, and we created a
'asm_volatile_goto()' macro for that in the past: see commits
3f0116c323 ("compiler/gcc4: Add quirk for 'asm goto' miscompilation
bug") and a9f180345f ("compiler/gcc4: Make quirk for
asm_volatile_goto() unconditional").
Then, much later, we ended up removing the workaround in commit
43c249ea0b ("compiler-gcc.h: remove ancient workaround for gcc PR
58670") because we no longer supported building the kernel with the
affected gcc versions, but we left the macro uses around.
Now, Sean Christopherson reports a new version of a very similar
problem, which is fixed by re-applying that ancient workaround. But the
problem in question is limited to only the 'asm goto with outputs'
cases, so instead of re-introducing the old workaround as-is, let's
rename and limit the workaround to just that much less common case.
It looks like there are at least two separate issues that all hit in
this area:
(a) some versions of gcc don't mark the asm goto as 'volatile' when it
has outputs:
https://gcc.gnu.org/bugzilla/show_bug.cgi?id=98619https://gcc.gnu.org/bugzilla/show_bug.cgi?id=110420
which is easy to work around by just adding the 'volatile' by hand.
(b) Internal compiler errors:
https://gcc.gnu.org/bugzilla/show_bug.cgi?id=110422
which are worked around by adding the extra empty 'asm' as a
barrier, as in the original workaround.
but the problem Sean sees may be a third thing since it involves bad
code generation (not an ICE) even with the manually added 'volatile'.
but the same old workaround works for this case, even if this feels a
bit like voodoo programming and may only be hiding the issue.
Reported-and-tested-by: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/all/20240208220604.140859-1-seanjc@google.com/
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Uros Bizjak <ubizjak@gmail.com>
Cc: Jakub Jelinek <jakub@redhat.com>
Cc: Andrew Pinski <quic_apinski@quicinc.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Fix virtual vs physical address confusion. This does not fix a bug
since virtual and physical address spaces are currently the same.
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Code sections in s390 specific kernel code which use floating point or
vector registers all come with a 520 byte stack variable to save already in
use registers, if required.
With INIT_STACK_ALL_PATTERN or INIT_STACK_ALL_ZERO enabled this variable
will always be initialized on function entry in addition to saving register
contents, which contradicts the intention (performance improvement) of such
code sections.
Therefore provide a DECLARE_KERNEL_FPU_ONSTACK() macro which provides
struct kernel_fpu variables with an __uninitialized attribute, and convert
all existing code to use this.
This way only this specific type of stack variable will not be initialized,
regardless of config options.
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20240205154844.3757121-3-hca@linux.ibm.com
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Now that the driver core can properly handle constant struct bus_type,
move the stp_subsys variable to be a constant structure as well,
placing it into read-only memory which can not be modified at runtime.
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: "Ricardo B. Marliere" <ricardo@marliere.net>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20240204-bus_cleanup-s390_time-v1-1-d2120156982a@marliere.net
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
'-fPIC' as an option to the linker does not do what it seems like it
should. With ld.bfd, it is treated as '-f PIC', which does not make
sense based on the meaning of '-f':
-f SHLIB, --auxiliary SHLIB Auxiliary filter for shared object symbol table
When building with ld.lld (currently under review in a GitHub pull
request), it just errors out because '-f' means nothing and neither does
'-fPIC':
ld.lld: error: unknown argument '-fPIC'
'-fPIC' was blindly copied from CFLAGS when the vDSO stopped being
linked with '$(CC)', it should not be needed. Remove it to clear up the
build failure with ld.lld.
Fixes: 2b2a25845d ("s390/vdso: Use $(LD) instead of $(CC) to link vDSO")
Link: https://github.com/llvm/llvm-project/pull/75643
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Fangrui Song <maskray@google.com>
Link: https://lore.kernel.org/r/20240130-s390-vdso-drop-fpic-from-ldflags-v1-1-094ad104fc55@kernel.org
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Stefan reported a test case fail in libc. The test runs with
randomize_va_space set to zero, i.e. disabled randomization. Additionally,
it runs the program with the dynamic loader. Looking at the failure showed
that the heap was placed right before some pages mapped from the binary.
This made memory allocation fail after a few allocations.
Normally, when address randomization is switched off and the binary is
loaded from the dynamic loader, the kernel places the binary below the
128MB top gap. So the address map would look like this:
3fff7fd1000-3fff7fd2000 r--p 00000000 5e:01 1447115 /lib/ld64.so.1
3fff7fd2000-3fff7ff2000 r-xp 00001000 5e:01 1447115 /lib/ld64.so.1
3fff7ff2000-3fff7ffc000 r--p 00021000 5e:01 1447115 /lib/ld64.so.1
3fff7ffc000-3fff7ffe000 r--p 0002a000 5e:01 1447115 /lib/ld64.so.1
3fff7ffe000-3fff8000000 rw-p 0002c000 5e:01 1447115 /lib/ld64.so.1
3fff8000000-3fff8021000 rw-p 00000000 00:00 0 [heap]
3fffffda000-3ffffffb000 rw-p 00000000 00:00 0 [stack]
3ffffffc000-3ffffffe000 r--p 00000000 00:00 0 [vvar]
3ffffffe000-40000000000 r-xp 00000000 00:00 0 [vdso]
However, commit 1f6b83e5e4 ("s390: avoid z13 cache aliasing") introduced
a mmap alignment mask of 8MB. With this commit, the memory map now
looks like this:
3fff7f80000-3fff7f81000 r--p 00000000 5e:01 1447115 /lib/ld64.so.1
3fff7f81000-3fff7fa1000 r-xp 00001000 5e:01 1447115 /lib/ld64.so.1
3fff7fa1000-3fff7fab000 r--p 00021000 5e:01 1447115 /lib/ld64.so.1
3fff7fab000-3fff7fad000 r--p 0002a000 5e:01 1447115 /lib/ld64.so.1
3fff7fad000-3fff7faf000 rw-p 0002c000 5e:01 1447115 /lib/ld64.so.1
3fff7faf000-3fff7fd0000 rw-p 00000000 00:00 0 [heap]
3fff7fdc000-3fff8000000 rw-p 00000000 00:00 0
3fffffda000-3ffffffb000 rw-p 00000000 00:00 0 [stack]
3ffffffc000-3ffffffe000 r--p 00000000 00:00 0 [vvar]
3ffffffe000-40000000000 r-xp 00000000 00:00 0 [vdso]
The reason for this placement is that the elf loader loads the binary to
end at mmap_base (0x3fff8000000 on s390). This would result in a start
address of 0x3fff7fd1000, but due to the alignment requirement of 8MB,
mmap chooses 0x3fff7f80000. This causes a gap between the end of the
mapped binary and mmap_base. When the next non-shared and non-file pages
are mapped, mmap searches from top to bottom and the first free space it
finds is the gap which is now present. This leaves only a few pages for
the heap. With enabled address space randomization this doesn't happen
because the binary is mapped to a completely different memory area.
Fix this by disabling the mmap alignment when address space randomization
is disabled. This is in line with what other architectures are doing.
Reported-by: Stefan Liebler <stli@linux.ibm.com>
Tested-by: Stefan Liebler <stli@linux.ibm.com>
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Remove GFP_DMA flag when allocating memory to be used for diagnose 304.
Diagnose 304 can access memory beyond the DMA zone.
Suggested-by: Alexander Gordeev <agordeev@linux.ibm.com>
Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
diag14() is currently only used by the vmur device driver. The third
parameter, called subcommand, determines the type of the first
parameter. For some subcommands the value of the first parameter is an
address to a memory buffer and needs virtual to physical address
conversion. Other subcommands interpret the first parameter is an
integer.
This doesn't fix a bug since virtual and physical addresses
are currently the same.
Suggested-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
The common timekeeping code steers the clock by adjusting the multiplier
value of the clock. With the current value of 1000 precision is lost
when the clock is steered with a userspace daemon. Increase the multiplier
and the shift values to increase precision.
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
paicrypt_init() return incorrect error code in case the number
of PAI crypto counters is too high. Change the return code to
-E2BIG.
Please merge with d0b0efedc7fe
Reported-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
The number of sysfs files to be exported by the PAI device drivers
depends on the hardware version level. Use the value returned by
the hardware as the maximum number of counters to be exported
in the sysfs attribute tree.
Without the fix, older machine generation export counter names
based on paiXXXX_ctrnames static array info, which can be inaccurate,
as this array could also contain newer counter names in the
future. This ensures proper pai counter sysfs attributes for
both newer generation and older generation processors.
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Acked-by: Sumanth Korikkar <sumanthk@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
When the device driver is initialized, it checks the number of
possible counters. Should this number be too high, emit an error
and return.
Reported-by: Sumanth Korikkar <sumanthk@linux.ibm.com>
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Acked-by: Sumanth Korikkar <sumanthk@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
When the device drivers are initialized, a sysfs directory
is created. This contains many attributes which are allocated with
kzalloc(). Should it fail, the memory for the attributes already
created is freed in attr_event_free(). Its second parameter is number
of attribute elements to delete. This parameter is off by one.
When i. e. the 10th attribute fails to get created, attributes
numbered 0 to 9 should be deleted. Currently only attributes
numbered 0 to 8 are deleted.
Fixes: 39d62336f5 ("s390/pai: add support for cryptography counters")
Reported-by: Sumanth Korikkar <sumanthk@linux.ibm.com>
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Acked-by: Sumanth Korikkar <sumanthk@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Add missing virt_to_phys() translation to diag0c(). This doesn't fix a
bug since virtual and physical addresses are currently the same.
Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Add missing virt_to_phys() translation to __hypfs_sprp_diag304().
This doesn't fix a bug since virtual and physical addresses are
currently the same.
Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Fix virtual vs physical address confusion (which currently are the same).
Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Fix virtual vs physical address confusion (which currently are the same).
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
It looks like all distributions will enable INIT_STACK_ALL_ZERO.
Reflect that in the default configurations.
Acked-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
CONFIG_COMPAT is disabled by default, however compat code still needs to
be compile tested. Add a compat topic configuration target which allows to
enable it easily.
Acked-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Cleanups to Kconfig definitions for KVM
* replace HAVE_KVM with an architecture-dependent symbol, when CONFIG_KVM
may or may not be available depending on CPU capabilities (MIPS)
* replace HAVE_KVM with IS_ENABLED(CONFIG_KVM) for host-side code that is
not part of the KVM module, so that it is completely compiled out
* factor common "select" statements in common code instead of requiring
each architecture to specify it
Since all architectures (for historical reasons) have to define
struct kvm_guest_debug_arch, and since userspace has to check
KVM_CHECK_EXTENSION(KVM_CAP_SET_GUEST_DEBUG) anyway, there is
no advantage in masking the capability #define itself. Remove
the #define __KVM_HAVE_GUEST_DEBUG from architecture-specific
headers.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
While this in principle breaks the appearance of KVM_S390_* ioctls on architectures
other than s390, this seems unlikely to be a problem considering that there are
already many "struct kvm_s390_*" definitions in arch/s390/include/uapi.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
For simplicity in splitting out UBSan options into separate rules,
remove CONFIG_UBSAN_SANITIZE_ALL, effectively defaulting to "y", which
is how it is generally used anyway. (There are no ":= y" cases beyond
where a specific file is enabled when a top-level ":= n" is in effect.)
Cc: Andrey Konovalov <andreyknvl@gmail.com>
Cc: Marco Elver <elver@google.com>
Cc: linux-doc@vger.kernel.org
Cc: linux-kbuild@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
This patch creates wordpart.h and includes it in asm/word-at-a-time.h
for all architectures. WORD_AT_A_TIME_CONSTANTS depends on kernel.h
because of REPEAT_BYTE. Moving this to another header and including it
where necessary allows us to not include the bloated kernel.h. Making
this implicit dependency on REPEAT_BYTE explicit allows for later
improvements in the lib/string.c inclusion list.
Suggested-by: Al Viro <viro@zeniv.linux.org.uk>
Suggested-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Tanzir Hasan <tanzirh@google.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20231226-libstringheader-v6-1-80aa08c7652c@google.com
Signed-off-by: Kees Cook <keescook@chromium.org>
The modules are being moved from lib/livepatch to
tools/testing/selftests/livepatch/test_modules.
This code moving will allow writing more complex tests, like for example an
userspace C code that will call a livepatched kernel function.
The modules are now built as out-of-tree
modules, but being part of the kernel source means they will be maintained.
Another advantage of the code moving is to be able to easily change,
debug and rebuild the tests by running make on the selftests/livepatch
directory, which is not currently possible since the modules on
lib/livepatch are build and installed using the "modules" target.
The current approach also keeps the ability to execute the tests manually
by executing the scripts inside selftests/livepatch directory, as it's
currently supported. If the modules are modified, they needed to be
rebuilt before running the scripts though.
The modules are built before running the selftests when using the
kselftest invocations:
make kselftest TARGETS=livepatch
or
make -C tools/testing/selftests/livepatch run_tests
Having the modules being built as out-of-modules requires changing the
currently used 'modprobe' by 'insmod' and adapt the test scripts that
check for the kernel message buffer.
Now it is possible to only compile the modules by running:
make -C tools/testing/selftests/livepatch/
This way the test modules and other test program can be built in order
to be packaged if so desired.
As there aren't any modules being built on lib/livepatch, remove the
TEST_LIVEPATCH Kconfig and it's references.
Note: "make gen_tar" packages the pre-built binaries into the tarball.
It means that it will store the test modules pre-built for
the kernel running on the build host.
Note that these modules need not binary compatible with
the kernel built from the same sources. But the same
is true for other packaged selftest binaries.
The entire kernel sources are needed for rebuilding
the selftests on another system.
Reviewed-by: Joe Lawrence <joe.lawrence@redhat.com>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Marcos Paulo de Souza <mpdesouza@suse.com>
Acked-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCZabMrQAKCRCRxhvAZXjc
ovnUAQDgCOonb1tjtTvC8s8IMDUEoaVYZI91KVfsZQSJYN1sdQD+KfJmX1BhJnWG
l0cEffGfnWGXMZkZqDgLPHUIPzFrmws=
=1b3j
-----END PGP SIGNATURE-----
Merge tag 'vfs-6.8.netfs' of gitolite.kernel.org:pub/scm/linux/kernel/git/vfs/vfs
Pull netfs updates from Christian Brauner:
"This extends the netfs helper library that network filesystems can use
to replace their own implementations. Both afs and 9p are ported. cifs
is ready as well but the patches are way bigger and will be routed
separately once this is merged. That will remove lots of code as well.
The overal goal is to get high-level I/O and knowledge of the page
cache and ouf of the filesystem drivers. This includes knowledge about
the existence of pages and folios
The pull request converts afs and 9p. This removes about 800 lines of
code from afs and 300 from 9p. For 9p it is now possible to do writes
in larger than a page chunks. Additionally, multipage folio support
can be turned on for 9p. Separate patches exist for cifs removing
another 2000+ lines. I've included detailed information in the
individual pulls I took.
Summary:
- Add NFS-style (and Ceph-style) locking around DIO vs buffered I/O
calls to prevent these from happening at the same time.
- Support for direct and unbuffered I/O.
- Support for write-through caching in the page cache.
- O_*SYNC and RWF_*SYNC writes use write-through rather than writing
to the page cache and then flushing afterwards.
- Support for write-streaming.
- Support for write grouping.
- Skip reads for which the server could only return zeros or EOF.
- The fscache module is now part of the netfs library and the
corresponding maintainer entry is updated.
- Some helpers from the fscache subsystem are renamed to mark them as
belonging to the netfs library.
- Follow-up fixes for the netfs library.
- Follow-up fixes for the 9p conversion"
* tag 'vfs-6.8.netfs' of gitolite.kernel.org:pub/scm/linux/kernel/git/vfs/vfs: (50 commits)
netfs: Fix wrong #ifdef hiding wait
cachefiles: Fix signed/unsigned mixup
netfs: Fix the loop that unmarks folios after writing to the cache
netfs: Fix interaction between write-streaming and cachefiles culling
netfs: Count DIO writes
netfs: Mark netfs_unbuffered_write_iter_locked() static
netfs: Fix proc/fs/fscache symlink to point to "netfs" not "../netfs"
netfs: Rearrange netfs_io_subrequest to put request pointer first
9p: Use length of data written to the server in preference to error
9p: Do a couple of cleanups
9p: Fix initialisation of netfs_inode for 9p
cachefiles: Fix __cachefiles_prepare_write()
9p: Use netfslib read/write_iter
afs: Use the netfs write helpers
netfs: Export the netfs_sreq tracepoint
netfs: Optimise away reads above the point at which there can be no data
netfs: Implement a write-through caching option
netfs: Provide a launder_folio implementation
netfs: Provide a writepages implementation
netfs, cachefiles: Pass upper bound length to allow expansion
...
- do not enable by default the support of 31-bit Enterprise Systems
Architecture (ESA) ELF binaries
- drop automatic CONFIG_KEXEC selection, while set CONFIG_KEXEC=y
explicitly for defconfig and debug_defconfig only
- fix zpci_get_max_io_size() to allow PCI block stores where
normal PCI stores were used otherwise
- remove unneeded tsk variable in do_exception() fault handler
- __load_fpu_regs() is only called from the core kernel code.
Therefore, remove not needed EXPORT_SYMBOL.
- remove leftover comment from s390_fpregs_set() callback
- few cleanups to Processor Activity Instrumentation (PAI) code
(which perf framework is based on)
- replace Wenjia Zhang with Thorsten Winkler as s390 Inter-User
Communication Vehicle (IUCV) networking maintainer
- Fix all scenarios where queues previously removed from a guest's
Adjunct-Processor (AP) configuration do not re-appear in a reset
state when they are subsequently made available to a guest again
-----BEGIN PGP SIGNATURE-----
iI0EABYIADUWIQQrtrZiYVkVzKQcYivNdxKlNrRb8AUCZalUTxccYWdvcmRlZXZA
bGludXguaWJtLmNvbQAKCRDNdxKlNrRb8OZlAQDq7gZEL/ZSh1X4IQa4qPbdGeko
ArZvcOi3SiVW3jw3FgD8CfPauKux1tliSpeRybcRkUVQoPGvoWc8kwAkCm/Juwc=
=+Xd9
-----END PGP SIGNATURE-----
Merge tag 's390-6.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull more s390 updates from Alexander Gordeev:
- do not enable by default the support of 31-bit Enterprise Systems
Architecture (ESA) ELF binaries
- drop automatic CONFIG_KEXEC selection, while set CONFIG_KEXEC=y
explicitly for defconfig and debug_defconfig only
- fix zpci_get_max_io_size() to allow PCI block stores where normal PCI
stores were used otherwise
- remove unneeded tsk variable in do_exception() fault handler
- __load_fpu_regs() is only called from the core kernel code.
Therefore, remove not needed EXPORT_SYMBOL.
- remove leftover comment from s390_fpregs_set() callback
- few cleanups to Processor Activity Instrumentation (PAI) code (which
perf framework is based on)
- replace Wenjia Zhang with Thorsten Winkler as s390 Inter-User
Communication Vehicle (IUCV) networking maintainer
- Fix all scenarios where queues previously removed from a guest's
Adjunct-Processor (AP) configuration do not re-appear in a reset
state when they are subsequently made available to a guest again
* tag 's390-6.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/vfio-ap: do not reset queue removed from host config
s390/vfio-ap: reset queues associated with adapter for queue unbound from driver
s390/vfio-ap: reset queues filtered from the guest's AP config
s390/vfio-ap: let on_scan_complete() callback filter matrix and update guest's APCB
s390/vfio-ap: loop over the shadow APCB when filtering guest's AP configuration
s390/vfio-ap: always filter entire AP matrix
s390/net: add Thorsten Winkler as maintainer
s390/pai_ext: split function paiext_push_sample
s390/pai_ext: rework function paiext_copy argments
s390/pai: rework paiXXX_start and paiXXX_stop functions
s390/pai_crypto: split function paicrypt_push_sample
s390/pai: rework paixxxx_getctr interface
s390/ptrace: remove leftover comment
s390/fpu: remove __load_fpu_regs() export
s390/mm,fault: remove not needed tsk variable
s390/pci: fix max size calculation in zpci_memcpy_toio()
s390/kexec: do not automatically select KEXEC option
s390/compat: change default for CONFIG_COMPAT to "n"
- Use memdup_array_user() to harden against overflow.
- Unconditionally advertise KVM_CAP_DEVICE_CTRL for all architectures.
- Clean up Kconfigs that all KVM architectures were selecting
- New functionality around "guest_memfd", a new userspace API that
creates an anonymous file and returns a file descriptor that refers
to it. guest_memfd files are bound to their owning virtual machine,
cannot be mapped, read, or written by userspace, and cannot be resized.
guest_memfd files do however support PUNCH_HOLE, which can be used to
switch a memory area between guest_memfd and regular anonymous memory.
- New ioctl KVM_SET_MEMORY_ATTRIBUTES allowing userspace to specify
per-page attributes for a given page of guest memory; right now the
only attribute is whether the guest expects to access memory via
guest_memfd or not, which in Confidential SVMs backed by SEV-SNP,
TDX or ARM64 pKVM is checked by firmware or hypervisor that guarantees
confidentiality (AMD PSP, Intel TDX module, or EL2 in the case of pKVM).
x86:
- Support for "software-protected VMs" that can use the new guest_memfd
and page attributes infrastructure. This is mostly useful for testing,
since there is no pKVM-like infrastructure to provide a meaningfully
reduced TCB.
- Fix a relatively benign off-by-one error when splitting huge pages during
CLEAR_DIRTY_LOG.
- Fix a bug where KVM could incorrectly test-and-clear dirty bits in non-leaf
TDP MMU SPTEs if a racing thread replaces a huge SPTE with a non-huge SPTE.
- Use more generic lockdep assertions in paths that don't actually care
about whether the caller is a reader or a writer.
- let Xen guests opt out of having PV clock reported as "based on a stable TSC",
because some of them don't expect the "TSC stable" bit (added to the pvclock
ABI by KVM, but never set by Xen) to be set.
- Revert a bogus, made-up nested SVM consistency check for TLB_CONTROL.
- Advertise flush-by-ASID support for nSVM unconditionally, as KVM always
flushes on nested transitions, i.e. always satisfies flush requests. This
allows running bleeding edge versions of VMware Workstation on top of KVM.
- Sanity check that the CPU supports flush-by-ASID when enabling SEV support.
- On AMD machines with vNMI, always rely on hardware instead of intercepting
IRET in some cases to detect unmasking of NMIs
- Support for virtualizing Linear Address Masking (LAM)
- Fix a variety of vPMU bugs where KVM fail to stop/reset counters and other state
prior to refreshing the vPMU model.
- Fix a double-overflow PMU bug by tracking emulated counter events using a
dedicated field instead of snapshotting the "previous" counter. If the
hardware PMC count triggers overflow that is recognized in the same VM-Exit
that KVM manually bumps an event count, KVM would pend PMIs for both the
hardware-triggered overflow and for KVM-triggered overflow.
- Turn off KVM_WERROR by default for all configs so that it's not
inadvertantly enabled by non-KVM developers, which can be problematic for
subsystems that require no regressions for W=1 builds.
- Advertise all of the host-supported CPUID bits that enumerate IA32_SPEC_CTRL
"features".
- Don't force a masterclock update when a vCPU synchronizes to the current TSC
generation, as updating the masterclock can cause kvmclock's time to "jump"
unexpectedly, e.g. when userspace hotplugs a pre-created vCPU.
- Use RIP-relative address to read kvm_rebooting in the VM-Enter fault paths,
partly as a super minor optimization, but mostly to make KVM play nice with
position independent executable builds.
- Guard KVM-on-HyperV's range-based TLB flush hooks with an #ifdef on
CONFIG_HYPERV as a minor optimization, and to self-document the code.
- Add CONFIG_KVM_HYPERV to allow disabling KVM support for HyperV "emulation"
at build time.
ARM64:
- LPA2 support, adding 52bit IPA/PA capability for 4kB and 16kB
base granule sizes. Branch shared with the arm64 tree.
- Large Fine-Grained Trap rework, bringing some sanity to the
feature, although there is more to come. This comes with
a prefix branch shared with the arm64 tree.
- Some additional Nested Virtualization groundwork, mostly
introducing the NV2 VNCR support and retargetting the NV
support to that version of the architecture.
- A small set of vgic fixes and associated cleanups.
Loongarch:
- Optimization for memslot hugepage checking
- Cleanup and fix some HW/SW timer issues
- Add LSX/LASX (128bit/256bit SIMD) support
RISC-V:
- KVM_GET_REG_LIST improvement for vector registers
- Generate ISA extension reg_list using macros in get-reg-list selftest
- Support for reporting steal time along with selftest
s390:
- Bugfixes
Selftests:
- Fix an annoying goof where the NX hugepage test prints out garbage
instead of the magic token needed to run the test.
- Fix build errors when a header is delete/moved due to a missing flag
in the Makefile.
- Detect if KVM bugged/killed a selftest's VM and print out a helpful
message instead of complaining that a random ioctl() failed.
- Annotate the guest printf/assert helpers with __printf(), and fix the
various bugs that were lurking due to lack of said annotation.
There are two non-KVM patches buried in the middle of guest_memfd support:
fs: Rename anon_inode_getfile_secure() and anon_inode_getfd_secure()
mm: Add AS_UNMOVABLE to mark mapping as completely unmovable
The first is small and mostly suggested-by Christian Brauner; the second
a bit less so but it was written by an mm person (Vlastimil Babka).
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmWcMWkUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroO15gf/WLmmg3SET6Uzw9iEq2xo28831ZA+
6kpILfIDGKozV5safDmMvcInlc/PTnqOFrsKyyN4kDZ+rIJiafJdg/loE0kPXBML
wdR+2ix5kYI1FucCDaGTahskBDz8Lb/xTpwGg9BFLYFNmuUeHc74o6GoNvr1uliE
4kLZL2K6w0cSMPybUD+HqGaET80ZqPwecv+s1JL+Ia0kYZJONJifoHnvOUJ7DpEi
rgudVdgzt3EPjG0y1z6MjvDBXTCOLDjXajErlYuZD3Ej8N8s59Dh2TxOiDNTLdP4
a4zjRvDmgyr6H6sz+upvwc7f4M4p+DBvf+TkWF54mbeObHUYliStqURIoA==
=66Ws
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm updates from Paolo Bonzini:
"Generic:
- Use memdup_array_user() to harden against overflow.
- Unconditionally advertise KVM_CAP_DEVICE_CTRL for all
architectures.
- Clean up Kconfigs that all KVM architectures were selecting
- New functionality around "guest_memfd", a new userspace API that
creates an anonymous file and returns a file descriptor that refers
to it. guest_memfd files are bound to their owning virtual machine,
cannot be mapped, read, or written by userspace, and cannot be
resized. guest_memfd files do however support PUNCH_HOLE, which can
be used to switch a memory area between guest_memfd and regular
anonymous memory.
- New ioctl KVM_SET_MEMORY_ATTRIBUTES allowing userspace to specify
per-page attributes for a given page of guest memory; right now the
only attribute is whether the guest expects to access memory via
guest_memfd or not, which in Confidential SVMs backed by SEV-SNP,
TDX or ARM64 pKVM is checked by firmware or hypervisor that
guarantees confidentiality (AMD PSP, Intel TDX module, or EL2 in
the case of pKVM).
x86:
- Support for "software-protected VMs" that can use the new
guest_memfd and page attributes infrastructure. This is mostly
useful for testing, since there is no pKVM-like infrastructure to
provide a meaningfully reduced TCB.
- Fix a relatively benign off-by-one error when splitting huge pages
during CLEAR_DIRTY_LOG.
- Fix a bug where KVM could incorrectly test-and-clear dirty bits in
non-leaf TDP MMU SPTEs if a racing thread replaces a huge SPTE with
a non-huge SPTE.
- Use more generic lockdep assertions in paths that don't actually
care about whether the caller is a reader or a writer.
- let Xen guests opt out of having PV clock reported as "based on a
stable TSC", because some of them don't expect the "TSC stable" bit
(added to the pvclock ABI by KVM, but never set by Xen) to be set.
- Revert a bogus, made-up nested SVM consistency check for
TLB_CONTROL.
- Advertise flush-by-ASID support for nSVM unconditionally, as KVM
always flushes on nested transitions, i.e. always satisfies flush
requests. This allows running bleeding edge versions of VMware
Workstation on top of KVM.
- Sanity check that the CPU supports flush-by-ASID when enabling SEV
support.
- On AMD machines with vNMI, always rely on hardware instead of
intercepting IRET in some cases to detect unmasking of NMIs
- Support for virtualizing Linear Address Masking (LAM)
- Fix a variety of vPMU bugs where KVM fail to stop/reset counters
and other state prior to refreshing the vPMU model.
- Fix a double-overflow PMU bug by tracking emulated counter events
using a dedicated field instead of snapshotting the "previous"
counter. If the hardware PMC count triggers overflow that is
recognized in the same VM-Exit that KVM manually bumps an event
count, KVM would pend PMIs for both the hardware-triggered overflow
and for KVM-triggered overflow.
- Turn off KVM_WERROR by default for all configs so that it's not
inadvertantly enabled by non-KVM developers, which can be
problematic for subsystems that require no regressions for W=1
builds.
- Advertise all of the host-supported CPUID bits that enumerate
IA32_SPEC_CTRL "features".
- Don't force a masterclock update when a vCPU synchronizes to the
current TSC generation, as updating the masterclock can cause
kvmclock's time to "jump" unexpectedly, e.g. when userspace
hotplugs a pre-created vCPU.
- Use RIP-relative address to read kvm_rebooting in the VM-Enter
fault paths, partly as a super minor optimization, but mostly to
make KVM play nice with position independent executable builds.
- Guard KVM-on-HyperV's range-based TLB flush hooks with an #ifdef on
CONFIG_HYPERV as a minor optimization, and to self-document the
code.
- Add CONFIG_KVM_HYPERV to allow disabling KVM support for HyperV
"emulation" at build time.
ARM64:
- LPA2 support, adding 52bit IPA/PA capability for 4kB and 16kB base
granule sizes. Branch shared with the arm64 tree.
- Large Fine-Grained Trap rework, bringing some sanity to the
feature, although there is more to come. This comes with a prefix
branch shared with the arm64 tree.
- Some additional Nested Virtualization groundwork, mostly
introducing the NV2 VNCR support and retargetting the NV support to
that version of the architecture.
- A small set of vgic fixes and associated cleanups.
Loongarch:
- Optimization for memslot hugepage checking
- Cleanup and fix some HW/SW timer issues
- Add LSX/LASX (128bit/256bit SIMD) support
RISC-V:
- KVM_GET_REG_LIST improvement for vector registers
- Generate ISA extension reg_list using macros in get-reg-list
selftest
- Support for reporting steal time along with selftest
s390:
- Bugfixes
Selftests:
- Fix an annoying goof where the NX hugepage test prints out garbage
instead of the magic token needed to run the test.
- Fix build errors when a header is delete/moved due to a missing
flag in the Makefile.
- Detect if KVM bugged/killed a selftest's VM and print out a helpful
message instead of complaining that a random ioctl() failed.
- Annotate the guest printf/assert helpers with __printf(), and fix
the various bugs that were lurking due to lack of said annotation"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (185 commits)
x86/kvm: Do not try to disable kvmclock if it was not enabled
KVM: x86: add missing "depends on KVM"
KVM: fix direction of dependency on MMU notifiers
KVM: introduce CONFIG_KVM_COMMON
KVM: arm64: Add missing memory barriers when switching to pKVM's hyp pgd
KVM: arm64: vgic-its: Avoid potential UAF in LPI translation cache
RISC-V: KVM: selftests: Add get-reg-list test for STA registers
RISC-V: KVM: selftests: Add steal_time test support
RISC-V: KVM: selftests: Add guest_sbi_probe_extension
RISC-V: KVM: selftests: Move sbi_ecall to processor.c
RISC-V: KVM: Implement SBI STA extension
RISC-V: KVM: Add support for SBI STA registers
RISC-V: KVM: Add support for SBI extension registers
RISC-V: KVM: Add SBI STA info to vcpu_arch
RISC-V: KVM: Add steal-update vcpu request
RISC-V: KVM: Add SBI STA extension skeleton
RISC-V: paravirt: Implement steal-time support
RISC-V: Add SBI STA extension definitions
RISC-V: paravirt: Add skeleton for pv-time support
RISC-V: KVM: Fix indentation in kvm_riscv_vcpu_set_reg_csr()
...
Split function paiext_push_sample() into two parts. The first part
determines the number of bytes to store as raw data in the perf sample
record. This is now function paiext_have_sample().
The second part stores the raw data in the perf event's ring buffer.
No functional change.
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Reviewed-by: Mete Durlu <meted@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Change the function paiext_copy() parameter from a pointer to a
structure to two pointers to memory areas referenced. The other
members of that structure are not needed.
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Acked-by: Mete Durlu <meted@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
The PAI crypto counter and PAI NNPA counters start and stop functions
are streamlined. Move the conditions to invoke start and stop functions
to its respective function body and call them unconditionally.
The start and stop functions now determine how to proceed.
No functional change.
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Acked-by: Mete Durlu <meted@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Split function paicrypt_push_sample() into two parts. The first part
determines the number of bytes to store as raw data in the perf sample
record. The second part stores the raw data in the perf event's
ring buffer.
No functional change.
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Acked-by: Mete Durlu <meted@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Simplify the interface for functions paicrypt_getctr() and
paiext_getctr(). Change the first parameter from a pointer to a
structure to a pointer to a structure member. The other members
of the structure are not needed.
No functional change.
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Acked-by: Mete Durlu <meted@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Core & protocols
----------------
- Analyze and reorganize core networking structs (socks, netdev,
netns, mibs) to optimize cacheline consumption and set up
build time warnings to safeguard against future header changes.
This improves TCP performances with many concurrent connections
up to 40%.
- Add page-pool netlink-based introspection, exposing the
memory usage and recycling stats. This helps indentify
bad PP users and possible leaks.
- Refine TCP/DCCP source port selection to no longer favor even
source port at connect() time when IP_LOCAL_PORT_RANGE is set.
This lowers the time taken by connect() for hosts having
many active connections to the same destination.
- Refactor the TCP bind conflict code, shrinking related socket
structs.
- Refactor TCP SYN-Cookie handling, as a preparation step to
allow arbitrary SYN-Cookie processing via eBPF.
- Tune optmem_max for 0-copy usage, increasing the default value
to 128KB and namespecifying it.
- Allow coalescing for cloned skbs coming from page pools, improving
RX performances with some common configurations.
- Reduce extension header parsing overhead at GRO time.
- Add bridge MDB bulk deletion support, allowing user-space to
request the deletion of matching entries.
- Reorder nftables struct members, to keep data accessed by the
datapath first.
- Introduce TC block ports tracking and use. This allows supporting
multicast-like behavior at the TC layer.
- Remove UAPI support for retired TC qdiscs (dsmark, CBQ and ATM) and
classifiers (RSVP and tcindex).
- More data-race annotations.
- Extend the diag interface to dump TCP bound-only sockets.
- Conditional notification of events for TC qdisc class and actions.
- Support for WPAN dynamic associations with nearby devices, to form
a sub-network using a specific PAN ID.
- Implement SMCv2.1 virtual ISM device support.
- Add support for Batman-avd mulicast packet type.
BPF
---
- Tons of verifier improvements:
- BPF register bounds logic and range support along with a large
test suite
- log improvements
- complete precision tracking support for register spills
- track aligned STACK_ZERO cases as imprecise spilled registers. It
improves the verifier "instructions processed" metric from single
digit to 50-60% for some programs
- support for user's global BPF subprogram arguments with few
commonly requested annotations for a better developer experience
- support tracking of BPF_JNE which helps cases when the compiler
transforms (unsigned) "a > 0" into "if a == 0 goto xxx" and the
like
- several fixes
- Add initial TX metadata implementation for AF_XDP with support in
mlx5 and stmmac drivers. Two types of offloads are supported right
now, that is, TX timestamp and TX checksum offload.
- Fix kCFI bugs in BPF all forms of indirect calls from BPF into
kernel and from kernel into BPF work with CFI enabled. This allows
BPF to work with CONFIG_FINEIBT=y.
- Change BPF verifier logic to validate global subprograms lazily
instead of unconditionally before the main program, so they can be
guarded using BPF CO-RE techniques.
- Support uid/gid options when mounting bpffs.
- Add a new kfunc which acquires the associated cgroup of a task
within a specific cgroup v1 hierarchy where the latter is identified
by its id.
- Extend verifier to allow bpf_refcount_acquire() of a map value field
obtained via direct load which is a use-case needed in sched_ext.
- Add BPF link_info support for uprobe multi link along with bpftool
integration for the latter.
- Support for VLAN tag in XDP hints.
- Remove deprecated bpfilter kernel leftovers given the project
is developed in user-space (https://github.com/facebook/bpfilter).
Misc
----
- Support for parellel TC self-tests execution.
- Increase MPTCP self-tests coverage.
- Updated the bridge documentation, including several so-far
undocumented features.
- Convert all the net self-tests to run in unique netns, to
avoid random failures due to conflict and allow concurrent
runs.
- Add TCP-AO self-tests.
- Add kunit tests for both cfg80211 and mac80211.
- Autogenerate Netlink families documentation from YAML spec.
- Add yml-gen support for fixed headers and recursive nests, the
tool can now generate user-space code for all genetlink families
for which we have specs.
- A bunch of additional module descriptions fixes.
- Catch incorrect freeing of pages belonging to a page pool.
Driver API
----------
- Rust abstractions for network PHY drivers; do not cover yet the
full C API, but already allow implementing functional PHY drivers
in rust.
- Introduce queue and NAPI support in the netdev Netlink interface,
allowing complete access to the device <> NAPIs <> queues
relationship.
- Introduce notifications filtering for devlink to allow control
application scale to thousands of instances.
- Improve PHY validation, requesting rate matching information for
each ethtool link mode supported by both the PHY and host.
- Add support for ethtool symmetric-xor RSS hash.
- ACPI based Wifi band RFI (WBRF) mitigation feature for the AMD
platform.
- Expose pin fractional frequency offset value over new DPLL generic
netlink attribute.
- Convert older drivers to platform remove callback returning void.
- Add support for PHY package MMD read/write.
New hardware / drivers
----------------------
- Ethernet:
- Octeon CN10K devices
- Broadcom 5760X P7
- Qualcomm SM8550 SoC
- Texas Instrument DP83TG720S PHY
- Bluetooth:
- IMC Networks Bluetooth radio
Removed
-------
- WiFi:
- libertas 16-bit PCMCIA support
- Atmel at76c50x drivers
- HostAP ISA/PCMCIA style 802.11b driver
- zd1201 802.11b USB dongles
- Orinoco ISA/PCMCIA 802.11b driver
- Aviator/Raytheon driver
- Planet WL3501 driver
- RNDIS USB 802.11b driver
Drivers
-------
- Ethernet high-speed NICs:
- Intel (100G, ice, idpf):
- allow one by one port representors creation and removal
- add temperature and clock information reporting
- add get/set for ethtool's header split ringparam
- add again FW logging
- adds support switchdev hardware packet mirroring
- iavf: implement symmetric-xor RSS hash
- igc: add support for concurrent physical and free-running timers
- i40e: increase the allowable descriptors
- nVidia/Mellanox:
- Preparation for Socket-Direct multi-dev netdev. That will allow
in future releases combining multiple PFs devices attached to
different NUMA nodes under the same netdev
- Broadcom (bnxt):
- TX completion handling improvements
- add basic ntuple filter support
- reduce MSIX vectors usage for MQPRIO offload
- add VXLAN support, USO offload and TX coalesce completion for P7
- Marvell Octeon EP:
- xmit-more support
- add PF-VF mailbox support and use it for FW notifications for VFs
- Wangxun (ngbe/txgbe):
- implement ethtool functions to operate pause param, ring param,
coalesce channel number and msglevel
- Netronome/Corigine (nfp):
- add flow-steering support
- support UDP segmentation offload
- Ethernet NICs embedded, slower, virtual:
- Xilinx AXI: remove duplicate DMA code adopting the dma engine driver
- stmmac: add support for HW-accelerated VLAN stripping
- TI AM654x sw: add mqprio, frame preemption & coalescing
- gve: add support for non-4k page sizes.
- virtio-net: support dynamic coalescing moderation
- nVidia/Mellanox Ethernet datacenter switches:
- allow firmware upgrade without a reboot
- more flexible support for bridge flooding via the compressed
FID flooding mode
- Ethernet embedded switches:
- Microchip:
- fine-tune flow control and speed configurations in KSZ8xxx
- KSZ88X3: enable setting rmii reference
- Renesas:
- add jumbo frames support
- Marvell:
- 88E6xxx: add "eth-mac" and "rmon" stats support
- Ethernet PHYs:
- aquantia: add firmware load support
- at803x: refactor the driver to simplify adding support for more
chip variants
- NXP C45 TJA11xx: Add MACsec offload support
- Wifi:
- MediaTek (mt76):
- NVMEM EEPROM improvements
- mt7996 Extremely High Throughput (EHT) improvements
- mt7996 Wireless Ethernet Dispatcher (WED) support
- mt7996 36-bit DMA support
- Qualcomm (ath12k):
- support for a single MSI vector
- WCN7850: support AP mode
- Intel (iwlwifi):
- new debugfs file fw_dbg_clear
- allow concurrent P2P operation on DFS channels
- Bluetooth:
- QCA2066: support HFP offload
- ISO: more broadcast-related improvements
- NXP: better recovery in case receiver/transmitter get out of sync
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-----BEGIN PGP SIGNATURE-----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=1bW6
-----END PGP SIGNATURE-----
Merge tag 'net-next-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Paolo Abeni:
"The most interesting thing is probably the networking structs
reorganization and a significant amount of changes is around
self-tests.
Core & protocols:
- Analyze and reorganize core networking structs (socks, netdev,
netns, mibs) to optimize cacheline consumption and set up build
time warnings to safeguard against future header changes
This improves TCP performances with many concurrent connections up
to 40%
- Add page-pool netlink-based introspection, exposing the memory
usage and recycling stats. This helps indentify bad PP users and
possible leaks
- Refine TCP/DCCP source port selection to no longer favor even
source port at connect() time when IP_LOCAL_PORT_RANGE is set. This
lowers the time taken by connect() for hosts having many active
connections to the same destination
- Refactor the TCP bind conflict code, shrinking related socket
structs
- Refactor TCP SYN-Cookie handling, as a preparation step to allow
arbitrary SYN-Cookie processing via eBPF
- Tune optmem_max for 0-copy usage, increasing the default value to
128KB and namespecifying it
- Allow coalescing for cloned skbs coming from page pools, improving
RX performances with some common configurations
- Reduce extension header parsing overhead at GRO time
- Add bridge MDB bulk deletion support, allowing user-space to
request the deletion of matching entries
- Reorder nftables struct members, to keep data accessed by the
datapath first
- Introduce TC block ports tracking and use. This allows supporting
multicast-like behavior at the TC layer
- Remove UAPI support for retired TC qdiscs (dsmark, CBQ and ATM) and
classifiers (RSVP and tcindex)
- More data-race annotations
- Extend the diag interface to dump TCP bound-only sockets
- Conditional notification of events for TC qdisc class and actions
- Support for WPAN dynamic associations with nearby devices, to form
a sub-network using a specific PAN ID
- Implement SMCv2.1 virtual ISM device support
- Add support for Batman-avd mulicast packet type
BPF:
- Tons of verifier improvements:
- BPF register bounds logic and range support along with a large
test suite
- log improvements
- complete precision tracking support for register spills
- track aligned STACK_ZERO cases as imprecise spilled registers.
This improves the verifier "instructions processed" metric from
single digit to 50-60% for some programs
- support for user's global BPF subprogram arguments with few
commonly requested annotations for a better developer
experience
- support tracking of BPF_JNE which helps cases when the compiler
transforms (unsigned) "a > 0" into "if a == 0 goto xxx" and the
like
- several fixes
- Add initial TX metadata implementation for AF_XDP with support in
mlx5 and stmmac drivers. Two types of offloads are supported right
now, that is, TX timestamp and TX checksum offload
- Fix kCFI bugs in BPF all forms of indirect calls from BPF into
kernel and from kernel into BPF work with CFI enabled. This allows
BPF to work with CONFIG_FINEIBT=y
- Change BPF verifier logic to validate global subprograms lazily
instead of unconditionally before the main program, so they can be
guarded using BPF CO-RE techniques
- Support uid/gid options when mounting bpffs
- Add a new kfunc which acquires the associated cgroup of a task
within a specific cgroup v1 hierarchy where the latter is
identified by its id
- Extend verifier to allow bpf_refcount_acquire() of a map value
field obtained via direct load which is a use-case needed in
sched_ext
- Add BPF link_info support for uprobe multi link along with bpftool
integration for the latter
- Support for VLAN tag in XDP hints
- Remove deprecated bpfilter kernel leftovers given the project is
developed in user-space (https://github.com/facebook/bpfilter)
Misc:
- Support for parellel TC self-tests execution
- Increase MPTCP self-tests coverage
- Updated the bridge documentation, including several so-far
undocumented features
- Convert all the net self-tests to run in unique netns, to avoid
random failures due to conflict and allow concurrent runs
- Add TCP-AO self-tests
- Add kunit tests for both cfg80211 and mac80211
- Autogenerate Netlink families documentation from YAML spec
- Add yml-gen support for fixed headers and recursive nests, the tool
can now generate user-space code for all genetlink families for
which we have specs
- A bunch of additional module descriptions fixes
- Catch incorrect freeing of pages belonging to a page pool
Driver API:
- Rust abstractions for network PHY drivers; do not cover yet the
full C API, but already allow implementing functional PHY drivers
in rust
- Introduce queue and NAPI support in the netdev Netlink interface,
allowing complete access to the device <> NAPIs <> queues
relationship
- Introduce notifications filtering for devlink to allow control
application scale to thousands of instances
- Improve PHY validation, requesting rate matching information for
each ethtool link mode supported by both the PHY and host
- Add support for ethtool symmetric-xor RSS hash
- ACPI based Wifi band RFI (WBRF) mitigation feature for the AMD
platform
- Expose pin fractional frequency offset value over new DPLL generic
netlink attribute
- Convert older drivers to platform remove callback returning void
- Add support for PHY package MMD read/write
New hardware / drivers:
- Ethernet:
- Octeon CN10K devices
- Broadcom 5760X P7
- Qualcomm SM8550 SoC
- Texas Instrument DP83TG720S PHY
- Bluetooth:
- IMC Networks Bluetooth radio
Removed:
- WiFi:
- libertas 16-bit PCMCIA support
- Atmel at76c50x drivers
- HostAP ISA/PCMCIA style 802.11b driver
- zd1201 802.11b USB dongles
- Orinoco ISA/PCMCIA 802.11b driver
- Aviator/Raytheon driver
- Planet WL3501 driver
- RNDIS USB 802.11b driver
Driver updates:
- Ethernet high-speed NICs:
- Intel (100G, ice, idpf):
- allow one by one port representors creation and removal
- add temperature and clock information reporting
- add get/set for ethtool's header split ringparam
- add again FW logging
- adds support switchdev hardware packet mirroring
- iavf: implement symmetric-xor RSS hash
- igc: add support for concurrent physical and free-running
timers
- i40e: increase the allowable descriptors
- nVidia/Mellanox:
- Preparation for Socket-Direct multi-dev netdev. That will
allow in future releases combining multiple PFs devices
attached to different NUMA nodes under the same netdev
- Broadcom (bnxt):
- TX completion handling improvements
- add basic ntuple filter support
- reduce MSIX vectors usage for MQPRIO offload
- add VXLAN support, USO offload and TX coalesce completion
for P7
- Marvell Octeon EP:
- xmit-more support
- add PF-VF mailbox support and use it for FW notifications
for VFs
- Wangxun (ngbe/txgbe):
- implement ethtool functions to operate pause param, ring
param, coalesce channel number and msglevel
- Netronome/Corigine (nfp):
- add flow-steering support
- support UDP segmentation offload
- Ethernet NICs embedded, slower, virtual:
- Xilinx AXI: remove duplicate DMA code adopting the dma engine
driver
- stmmac: add support for HW-accelerated VLAN stripping
- TI AM654x sw: add mqprio, frame preemption & coalescing
- gve: add support for non-4k page sizes.
- virtio-net: support dynamic coalescing moderation
- nVidia/Mellanox Ethernet datacenter switches:
- allow firmware upgrade without a reboot
- more flexible support for bridge flooding via the compressed
FID flooding mode
- Ethernet embedded switches:
- Microchip:
- fine-tune flow control and speed configurations in KSZ8xxx
- KSZ88X3: enable setting rmii reference
- Renesas:
- add jumbo frames support
- Marvell:
- 88E6xxx: add "eth-mac" and "rmon" stats support
- Ethernet PHYs:
- aquantia: add firmware load support
- at803x: refactor the driver to simplify adding support for more
chip variants
- NXP C45 TJA11xx: Add MACsec offload support
- Wifi:
- MediaTek (mt76):
- NVMEM EEPROM improvements
- mt7996 Extremely High Throughput (EHT) improvements
- mt7996 Wireless Ethernet Dispatcher (WED) support
- mt7996 36-bit DMA support
- Qualcomm (ath12k):
- support for a single MSI vector
- WCN7850: support AP mode
- Intel (iwlwifi):
- new debugfs file fw_dbg_clear
- allow concurrent P2P operation on DFS channels
- Bluetooth:
- QCA2066: support HFP offload
- ISO: more broadcast-related improvements
- NXP: better recovery in case receiver/transmitter get out of sync"
* tag 'net-next-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1714 commits)
lan78xx: remove redundant statement in lan78xx_get_eee
lan743x: remove redundant statement in lan743x_ethtool_get_eee
bnxt_en: Fix RCU locking for ntuple filters in bnxt_rx_flow_steer()
bnxt_en: Fix RCU locking for ntuple filters in bnxt_srxclsrldel()
bnxt_en: Remove unneeded variable in bnxt_hwrm_clear_vnic_filter()
tcp: Revert no longer abort SYN_SENT when receiving some ICMP
Revert "mlx5 updates 2023-12-20"
Revert "net: stmmac: Enable Per DMA Channel interrupt"
ipvlan: Remove usage of the deprecated ida_simple_xx() API
ipvlan: Fix a typo in a comment
net/sched: Remove ipt action tests
net: stmmac: Use interrupt mode INTM=1 for per channel irq
net: stmmac: Add support for TX/RX channel interrupt
net: stmmac: Make MSI interrupt routine generic
dt-bindings: net: snps,dwmac: per channel irq
net: phy: at803x: make read_status more generic
net: phy: at803x: add support for cdt cross short test for qca808x
net: phy: at803x: refactor qca808x cable test get status function
net: phy: at803x: generalize cdt fault length function
net: ethernet: cortina: Drop TSO support
...
The code which validates floating point control register contents was
reworked with commit 702644249d ("s390/fpu: get rid of test_fp_ctl()").
There is still a comment which refers to the old implementation - remove it
in order to avoid confusion.
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
__load_fpu_regs() is only called from core kernel code.
Therefore remove the not needed export.
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
tsk is only used as an intermediate variable for current. Remove tsk
and use current directly instead at the only place where it is used.
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
The zpci_get_max_write_size() helper is used to determine the maximum
size a PCI store or load can use at a given __iomem address.
For the PCI block store the following restrictions apply:
1. The dst + len must not cross a 4K boundary in the (pseudo-)MMIO space
2. len must not exceed ZPCI_MAX_WRITE_SIZE
3. len must be a multiple of 8 bytes
4. The src address must be double word (8 byte) aligned
5. The dst address must be double word (8 byte) aligned
Otherwise only a normal PCI store which takes its src value from
a register can be used. For these PCI store restriction 1 still applies.
Similarly 1 also applies to PCI loads.
It turns out zpci_max_write_size() instead implements stricter
conditions which prevents PCI block stores from being used where they
can and should be used. In particular instead of conditions 4 and 5 it
wrongly enforces both dst and src to be size aligned. This indirectly
covers condition 1 but also prevents many legal PCI block stores.
On top of the functional shortcomings the zpci_get_max_write_size() is
misnamed as it is used for both read and write size calculations. Rename
it to zpci_get_max_io_size() and implement the listed conditions
explicitly.
Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com>
Fixes: cd24834130 ("s390/pci: base support")
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
[agordeev@linux.ibm.com replaced spaces with tabs]
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Following commit dccf78d39f ("kernel/Kconfig.kexec: drop
select of KEXEC for CRASH_DUMP") also drop automatic KEXEC
selection for s390 while set CONFIG_KEXEC=y explicitly for
defconfig and debug_defconfig targets. zfcpdump_defconfig
target gets CONFIG_KEXEC unset as result, which is right
and consistent with CONFIG_KEXEC_FILE besides.
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
31 bit support has been removed from the kernel more than eight years
ago. The last 31 bit distribution is many years older. There shouldn't be
any 31 bit code around anymore.
Therefore avoid providing an unused and only partially tested user space
interface and change the default for CONFIG_COMPAT from "yes" to "no".
Acked-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
- Add machine variable capacity information to /proc/sysinfo.
- Limit the waste of page tables and always align vmalloc area size
and base address on segment boundary.
- Fix a memory leak when an attempt to register interruption sub class
(ISC) for the adjunct-processor (AP) guest failed.
- Reset response code AP_RESPONSE_INVALID_GISA to understandable
by guest AP_RESPONSE_INVALID_ADDRESS in response to a failed
interruption sub class (ISC) registration attempt.
- Improve reaction to adjunct-processor (AP) AP_RESPONSE_OTHERWISE_CHANGED
response code when enabling interrupts on behalf of a guest.
- Fix incorrect sysfs 'status' attribute of adjunct-processor (AP) queue
device bound to the vfio_ap device driver when the mediated device is
attached to a guest, but the queue device is not passed through.
- Rework struct ap_card to hold the whole adjunct-processor (AP) card
hardware information. As result, all the ugly bit checks are replaced
by simple evaluations of the required bit fields.
- Improve handling of some weird scenarios between service element (SE)
host and SE guest with adjunct-processor (AP) pass-through support.
- Change local_ctl_set_bit() and local_ctl_clear_bit() so they return the
previous value of the to be changed control register. This is useful if
a bit is only changed temporarily and the previous content needs to be
restored.
- The kernel starts with machine checks disabled and is expected to enable
it once trap_init() is called. However the implementation allows machine
checks early. Consistently enable it in trap_init() only.
- local_mcck_disable() and local_mcck_enable() assume that machine checks
are always enabled. Instead implement and use local_mcck_save() and
local_mcck_restore() to disable machine checks and restore the previous
state.
- Modification of floating point control (FPC) register of a traced
process using ptrace interface may lead to corruption of the FPC
register of the tracing process. Fix this.
- kvm_arch_vcpu_ioctl_set_fpu() allows to set the floating point control
(FPC) register in vCPU, but may lead to corruption of the FPC register
of the host process. Fix this.
- Use READ_ONCE() to read a vCPU floating point register value from the
memory mapped area. This avoids that, depending on code generation,
a different value is tested for validity than the one that is used.
- Get rid of test_fp_ctl(), since it is quite subtle to use it correctly.
Instead copy a new floating point control register value into its save
area and test the validity of the new value when loading it.
- Remove superfluous save_fpu_regs() call.
- Remove s390 support for ARCH_WANTS_DYNAMIC_TASK_STRUCT. All machines
provide the vector facility since many years and the need to make the
task structure size dependent on the vector facility does not exist.
- Remove the "novx" kernel command line option, as the vector code runs
without any problems since many years.
- Add the vector facility to the z13 architecture level set (ALS).
All hypervisors support the vector facility since many years.
This allows compile time optimizations of the kernel.
- Get rid of MACHINE_HAS_VX and replace it with cpu_has_vx(). As result,
the compiled code will have less runtime checks and less code.
- Convert pgste_get_lock() and pgste_set_unlock() ASM inlines to C.
- Convert the struct subchannel spinlock from pointer to member.
-----BEGIN PGP SIGNATURE-----
iI0EABYIADUWIQQrtrZiYVkVzKQcYivNdxKlNrRb8AUCZZxnchccYWdvcmRlZXZA
bGludXguaWJtLmNvbQAKCRDNdxKlNrRb8PyGAP9Z0Z1Pm3hPf24M4FgY5uuRqBHo
VoiuohOZRGONwifnsgEAmN/3ba/7d/j0iMwpUdUFouiqtwTUihh15wYx1sH2IA8=
=F6YD
-----END PGP SIGNATURE-----
Merge tag 's390-6.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 updates from Alexander Gordeev:
- Add machine variable capacity information to /proc/sysinfo.
- Limit the waste of page tables and always align vmalloc area size and
base address on segment boundary.
- Fix a memory leak when an attempt to register interruption sub class
(ISC) for the adjunct-processor (AP) guest failed.
- Reset response code AP_RESPONSE_INVALID_GISA to understandable by
guest AP_RESPONSE_INVALID_ADDRESS in response to a failed
interruption sub class (ISC) registration attempt.
- Improve reaction to adjunct-processor (AP)
AP_RESPONSE_OTHERWISE_CHANGED response code when enabling interrupts
on behalf of a guest.
- Fix incorrect sysfs 'status' attribute of adjunct-processor (AP)
queue device bound to the vfio_ap device driver when the mediated
device is attached to a guest, but the queue device is not passed
through.
- Rework struct ap_card to hold the whole adjunct-processor (AP) card
hardware information. As result, all the ugly bit checks are replaced
by simple evaluations of the required bit fields.
- Improve handling of some weird scenarios between service element (SE)
host and SE guest with adjunct-processor (AP) pass-through support.
- Change local_ctl_set_bit() and local_ctl_clear_bit() so they return
the previous value of the to be changed control register. This is
useful if a bit is only changed temporarily and the previous content
needs to be restored.
- The kernel starts with machine checks disabled and is expected to
enable it once trap_init() is called. However the implementation
allows machine checks early. Consistently enable it in trap_init()
only.
- local_mcck_disable() and local_mcck_enable() assume that machine
checks are always enabled. Instead implement and use
local_mcck_save() and local_mcck_restore() to disable machine checks
and restore the previous state.
- Modification of floating point control (FPC) register of a traced
process using ptrace interface may lead to corruption of the FPC
register of the tracing process. Fix this.
- kvm_arch_vcpu_ioctl_set_fpu() allows to set the floating point
control (FPC) register in vCPU, but may lead to corruption of the FPC
register of the host process. Fix this.
- Use READ_ONCE() to read a vCPU floating point register value from the
memory mapped area. This avoids that, depending on code generation, a
different value is tested for validity than the one that is used.
- Get rid of test_fp_ctl(), since it is quite subtle to use it
correctly. Instead copy a new floating point control register value
into its save area and test the validity of the new value when
loading it.
- Remove superfluous save_fpu_regs() call.
- Remove s390 support for ARCH_WANTS_DYNAMIC_TASK_STRUCT. All machines
provide the vector facility since many years and the need to make the
task structure size dependent on the vector facility does not exist.
- Remove the "novx" kernel command line option, as the vector code runs
without any problems since many years.
- Add the vector facility to the z13 architecture level set (ALS). All
hypervisors support the vector facility since many years. This allows
compile time optimizations of the kernel.
- Get rid of MACHINE_HAS_VX and replace it with cpu_has_vx(). As
result, the compiled code will have less runtime checks and less
code.
- Convert pgste_get_lock() and pgste_set_unlock() ASM inlines to C.
- Convert the struct subchannel spinlock from pointer to member.
* tag 's390-6.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (24 commits)
Revert "s390: update defconfigs"
s390/cio: make sch->lock spinlock pointer a member
s390: update defconfigs
s390/mm: convert pgste locking functions to C
s390/fpu: get rid of MACHINE_HAS_VX
s390/als: add vector facility to z13 architecture level set
s390/fpu: remove "novx" option
s390/fpu: remove ARCH_WANTS_DYNAMIC_TASK_STRUCT support
KVM: s390: remove superfluous save_fpu_regs() call
s390/fpu: get rid of test_fp_ctl()
KVM: s390: use READ_ONCE() to read fpc register value
KVM: s390: fix setting of fpc register
s390/ptrace: handle setting of fpc register correctly
s390/nmi: implement and use local_mcck_save() / local_mcck_restore()
s390/nmi: consistently enable machine checks in trap_init()
s390/ctlreg: return old register contents when changing bits
s390/ap: handle outband SE bind state change
s390/ap: store TAPQ hwinfo in struct ap_card
s390/vfio-ap: fix sysfs status attribute for AP queue devices
s390/vfio-ap: improve reaction to response code 07 from PQAP(AQIC) command
...
A series from Baoquan He cleans up the asm-generic/io.h to remove the
ioremap_uc() definition from everything except x86, which still needs it
for pre-PAT systems. This series notably contains a patch from Jiaxun Yang
that converts MIPS to use asm-generic/io.h like every other architecture
does, enabling future cleanups.
Some of my own patches fix -Wmissing-prototype warnings in architecture
specific code across several architectures. This is now needed as the
warning is enabled by default. There are still some remaining warnings
in minor platforms, but the series should catch most of the widely used
ones make them more consistent with one another.
David McKay fixes a bug in __generic_cmpxchg_local() when this is used
on 64-bit architectures. This could currently only affect parisc64
and sparc64.
Additional cleanups address from Linus Walleij, Uwe Kleine-König,
Thomas Huth, and Kefeng Wang help reduce unnecessary inconsistencies
between architectures.
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEiK/NIGsWEZVxh/FrYKtH/8kJUicFAmWeak8ACgkQYKtH/8kJ
UidSiQ/+LL1WTO9d3Zx5HI0GGGjaIYpYs6jUNSf9Y5GPQiOrvjfEWj7CU11/4vxl
GlQRpRyncYm8Eiz0Qu+aNxZFiiMah8Uful75yfbX8P1L4EPTbAYNDjkyNJrTjIAK
jPK4sl8awIrapOeFUz++PsEj22R/4Is4f0mo+CqoCkL5RKlHe5oFdXzcwjmds4yK
CvU6Ldn+M7FZ3EItMdjXaB3D3HS9uictFiO5JByZY8p+IcqgNRI/iHNnZIMsltJ+
XjDi0DG+x4jCj6teElSchw7AofE4OcNSP3xbR1PLKv6+xBLGYaAGZhNuPTz88eV/
Gj0loDQrrR5McGUfDBRHK9zN2Jd0O/FKnfh9kLOt1FLFyGPvC78Q/2HkpVCjbBr2
Pr1aqhLDHA+tGNSsThsV8RUa8/tiEnxAki43tfBFS3SEKhtQsTm2g1z4miwbE3p0
BJIrSgTqrP/SBq7a9z/thPrkzdZcNuA9FUETTbaMeUlJS51n1V9E5A1t7sOG7jaI
vV/gbuR6FjvD49mTyQiOSCt3V4ygRqgN1Q+C4QM8WLqq2keUq0AhGodquv8F78in
J3x2j2r27lHY7jKf8B0dua/JXAsF20u8qD6yDQ9ymkjt/MWhGXBgK0jpT7RTIuMS
e2jmTywUVD4UohAcx3inkOojUhIJ5KDB0I4Pzv4zWcHNbyFNKcY=
=4VQl
-----END PGP SIGNATURE-----
Merge tag 'asm-generic-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic
Pull asm-generic cleanups from Arnd Bergmann:
"A series from Baoquan He cleans up the asm-generic/io.h to remove the
ioremap_uc() definition from everything except x86, which still needs
it for pre-PAT systems. This series notably contains a patch from
Jiaxun Yang that converts MIPS to use asm-generic/io.h like every
other architecture does, enabling future cleanups.
Some of my own patches fix -Wmissing-prototype warnings in
architecture specific code across several architectures. This is now
needed as the warning is enabled by default. There are still some
remaining warnings in minor platforms, but the series should catch
most of the widely used ones make them more consistent with one
another.
David McKay fixes a bug in __generic_cmpxchg_local() when this is used
on 64-bit architectures. This could currently only affect parisc64 and
sparc64.
Additional cleanups address from Linus Walleij, Uwe Kleine-König,
Thomas Huth, and Kefeng Wang help reduce unnecessary inconsistencies
between architectures"
* tag 'asm-generic-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic:
asm-generic: Fix 32 bit __generic_cmpxchg_local
Hexagon: Make pfn accessors statics inlines
ARC: mm: Make virt_to_pfn() a static inline
mips: remove extraneous asm-generic/iomap.h include
sparc: Use $(kecho) to announce kernel images being ready
arm64: vdso32: Define BUILD_VDSO32_64 to correct prototypes
csky: fix arch_jump_label_transform_static override
arch: add do_page_fault prototypes
arch: add missing prepare_ftrace_return() prototypes
arch: vdso: consolidate gettime prototypes
arch: include linux/cpu.h for trap_init() prototype
arch: fix asm-offsets.c building with -Wmissing-prototypes
arch: consolidate arch_irq_work_raise prototypes
hexagon: Remove CONFIG_HEXAGON_ARCH_VERSION from uapi header
asm/io: remove unnecessary xlate_dev_mem_ptr() and unxlate_dev_mem_ptr()
mips: io: remove duplicated codes
arch/*/io.h: remove ioremap_uc in some architectures
mips: add <asm-generic/io.h> including
The goal is to get sched.h down to a type only header, so the main thing
happening in this patchset is splitting out various _types.h headers and
dependency fixups, as well as moving some things out of sched.h to
better locations.
This is prep work for the memory allocation profiling patchset which
adds new sched.h interdepencencies.
Testing - it's been in -next, and fixes from pretty much all
architectures have percolated in - nothing major.
-----BEGIN PGP SIGNATURE-----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=3tyT
-----END PGP SIGNATURE-----
Merge tag 'header_cleanup-2024-01-10' of https://evilpiepirate.org/git/bcachefs
Pull header cleanups from Kent Overstreet:
"The goal is to get sched.h down to a type only header, so the main
thing happening in this patchset is splitting out various _types.h
headers and dependency fixups, as well as moving some things out of
sched.h to better locations.
This is prep work for the memory allocation profiling patchset which
adds new sched.h interdepencencies"
* tag 'header_cleanup-2024-01-10' of https://evilpiepirate.org/git/bcachefs: (51 commits)
Kill sched.h dependency on rcupdate.h
kill unnecessary thread_info.h include
Kill unnecessary kernel.h include
preempt.h: Kill dependency on list.h
rseq: Split out rseq.h from sched.h
LoongArch: signal.c: add header file to fix build error
restart_block: Trim includes
lockdep: move held_lock to lockdep_types.h
sem: Split out sem_types.h
uidgid: Split out uidgid_types.h
seccomp: Split out seccomp_types.h
refcount: Split out refcount_types.h
uapi/linux/resource.h: fix include
x86/signal: kill dependency on time.h
syscall_user_dispatch.h: split out *_types.h
mm_types_task.h: Trim dependencies
Split out irqflags_types.h
ipc: Kill bogus dependency on spinlock.h
shm: Slim down dependencies
workqueue: Split out workqueue_types.h
...
-----BEGIN PGP SIGNATURE-----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=Py+n
-----END PGP SIGNATURE-----
Merge tag 'lsm-pr-20240105' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/lsm
Pull security module updates from Paul Moore:
- Add three new syscalls: lsm_list_modules(), lsm_get_self_attr(), and
lsm_set_self_attr().
The first syscall simply lists the LSMs enabled, while the second and
third get and set the current process' LSM attributes. Yes, these
syscalls may provide similar functionality to what can be found under
/proc or /sys, but they were designed to support multiple,
simultaneaous (stacked) LSMs from the start as opposed to the current
/proc based solutions which were created at a time when only one LSM
was allowed to be active at a given time.
We have spent considerable time discussing ways to extend the
existing /proc interfaces to support multiple, simultaneaous LSMs and
even our best ideas have been far too ugly to support as a kernel
API; after +20 years in the kernel, I felt the LSM layer had
established itself enough to justify a handful of syscalls.
Support amongst the individual LSM developers has been nearly
unanimous, with a single objection coming from Tetsuo (TOMOYO) as he
is worried that the LSM_ID_XXX token concept will make it more
difficult for out-of-tree LSMs to survive. Several members of the LSM
community have demonstrated the ability for out-of-tree LSMs to
continue to exist by picking high/unused LSM_ID values as well as
pointing out that many kernel APIs rely on integer identifiers, e.g.
syscalls (!), but unfortunately Tetsuo's objections remain.
My personal opinion is that while I have no interest in penalizing
out-of-tree LSMs, I'm not going to penalize in-tree development to
support out-of-tree development, and I view this as a necessary step
forward to support the push for expanded LSM stacking and reduce our
reliance on /proc and /sys which has occassionally been problematic
for some container users. Finally, we have included the linux-api
folks on (all?) recent revisions of the patchset and addressed all of
their concerns.
- Add a new security_file_ioctl_compat() LSM hook to handle the 32-bit
ioctls on 64-bit systems problem.
This patch includes support for all of the existing LSMs which
provide ioctl hooks, although it turns out only SELinux actually
cares about the individual ioctls. It is worth noting that while
Casey (Smack) and Tetsuo (TOMOYO) did not give explicit ACKs to this
patch, they did both indicate they are okay with the changes.
- Fix a potential memory leak in the CALIPSO code when IPv6 is disabled
at boot.
While it's good that we are fixing this, I doubt this is something
users are seeing in the wild as you need to both disable IPv6 and
then attempt to configure IPv6 labeled networking via
NetLabel/CALIPSO; that just doesn't make much sense.
Normally this would go through netdev, but Jakub asked me to take
this patch and of all the trees I maintain, the LSM tree seemed like
the best fit.
- Update the LSM MAINTAINERS entry with additional information about
our process docs, patchwork, bug reporting, etc.
I also noticed that the Lockdown LSM is missing a dedicated
MAINTAINERS entry so I've added that to the pull request. I've been
working with one of the major Lockdown authors/contributors to see if
they are willing to step up and assume a Lockdown maintainer role;
hopefully that will happen soon, but in the meantime I'll continue to
look after it.
- Add a handful of mailmap entries for Serge Hallyn and myself.
* tag 'lsm-pr-20240105' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/lsm: (27 commits)
lsm: new security_file_ioctl_compat() hook
lsm: Add a __counted_by() annotation to lsm_ctx.ctx
calipso: fix memory leak in netlbl_calipso_add_pass()
selftests: remove the LSM_ID_IMA check in lsm/lsm_list_modules_test
MAINTAINERS: add an entry for the lockdown LSM
MAINTAINERS: update the LSM entry
mailmap: add entries for Serge Hallyn's dead accounts
mailmap: update/replace my old email addresses
lsm: mark the lsm_id variables are marked as static
lsm: convert security_setselfattr() to use memdup_user()
lsm: align based on pointer length in lsm_fill_user_ctx()
lsm: consolidate buffer size handling into lsm_fill_user_ctx()
lsm: correct error codes in security_getselfattr()
lsm: cleanup the size counters in security_getselfattr()
lsm: don't yet account for IMA in LSM_CONFIG_COUNT calculation
lsm: drop LSM_ID_IMA
LSM: selftests for Linux Security Module syscalls
SELinux: Add selfattr hooks
AppArmor: Add selfattr hooks
Smack: implement setselfattr and getselfattr hooks
...
many places. The notable patch series are:
- nilfs2 folio conversion from Matthew Wilcox in "nilfs2: Folio
conversions for file paths".
- Additional nilfs2 folio conversion from Ryusuke Konishi in "nilfs2:
Folio conversions for directory paths".
- IA64 remnant removal in Heiko Carstens's "Remove unused code after
IA-64 removal".
- Arnd Bergmann has enabled the -Wmissing-prototypes warning everywhere
in "Treewide: enable -Wmissing-prototypes". This had some followup
fixes:
- Nathan Chancellor has cleaned up the hexagon build in the series
"hexagon: Fix up instances of -Wmissing-prototypes".
- Nathan also addressed some s390 warnings in "s390: A couple of
fixes for -Wmissing-prototypes".
- Arnd Bergmann addresses the same warnings for MIPS in his series
"mips: address -Wmissing-prototypes warnings".
- Baoquan He has made kexec_file operate in a top-down-fitting manner
similar to kexec_load in the series "kexec_file: Load kernel at top of
system RAM if required"
- Baoquan He has also added the self-explanatory "kexec_file: print out
debugging message if required".
- Some checkstack maintenance work from Tiezhu Yang in the series
"Modify some code about checkstack".
- Douglas Anderson has disentangled the watchdog code's logging when
multiple reports are occurring simultaneously. The series is "watchdog:
Better handling of concurrent lockups".
- Yuntao Wang has contributed some maintenance work on the crash code in
"crash: Some cleanups and fixes".
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZZ2R6AAKCRDdBJ7gKXxA
juCVAP4t76qUISDOSKugB/Dn5E4Nt9wvPY9PcufnmD+xoPsgkQD+JVl4+jd9+gAV
vl6wkJDiJO5JZ3FVtBtC3DFA/xHtVgk=
=kQw+
-----END PGP SIGNATURE-----
Merge tag 'mm-nonmm-stable-2024-01-09-10-33' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull non-MM updates from Andrew Morton:
"Quite a lot of kexec work this time around. Many singleton patches in
many places. The notable patch series are:
- nilfs2 folio conversion from Matthew Wilcox in 'nilfs2: Folio
conversions for file paths'.
- Additional nilfs2 folio conversion from Ryusuke Konishi in 'nilfs2:
Folio conversions for directory paths'.
- IA64 remnant removal in Heiko Carstens's 'Remove unused code after
IA-64 removal'.
- Arnd Bergmann has enabled the -Wmissing-prototypes warning
everywhere in 'Treewide: enable -Wmissing-prototypes'. This had
some followup fixes:
- Nathan Chancellor has cleaned up the hexagon build in the series
'hexagon: Fix up instances of -Wmissing-prototypes'.
- Nathan also addressed some s390 warnings in 's390: A couple of
fixes for -Wmissing-prototypes'.
- Arnd Bergmann addresses the same warnings for MIPS in his series
'mips: address -Wmissing-prototypes warnings'.
- Baoquan He has made kexec_file operate in a top-down-fitting manner
similar to kexec_load in the series 'kexec_file: Load kernel at top
of system RAM if required'
- Baoquan He has also added the self-explanatory 'kexec_file: print
out debugging message if required'.
- Some checkstack maintenance work from Tiezhu Yang in the series
'Modify some code about checkstack'.
- Douglas Anderson has disentangled the watchdog code's logging when
multiple reports are occurring simultaneously. The series is
'watchdog: Better handling of concurrent lockups'.
- Yuntao Wang has contributed some maintenance work on the crash code
in 'crash: Some cleanups and fixes'"
* tag 'mm-nonmm-stable-2024-01-09-10-33' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (157 commits)
crash_core: fix and simplify the logic of crash_exclude_mem_range()
x86/crash: use SZ_1M macro instead of hardcoded value
x86/crash: remove the unused image parameter from prepare_elf_headers()
kdump: remove redundant DEFAULT_CRASH_KERNEL_LOW_SIZE
scripts/decode_stacktrace.sh: strip unexpected CR from lines
watchdog: if panicking and we dumped everything, don't re-enable dumping
watchdog/hardlockup: use printk_cpu_sync_get_irqsave() to serialize reporting
watchdog/softlockup: use printk_cpu_sync_get_irqsave() to serialize reporting
watchdog/hardlockup: adopt softlockup logic avoiding double-dumps
kexec_core: fix the assignment to kimage->control_page
x86/kexec: fix incorrect end address passed to kernel_ident_mapping_init()
lib/trace_readwrite.c:: replace asm-generic/io with linux/io
nilfs2: cpfile: fix some kernel-doc warnings
stacktrace: fix kernel-doc typo
scripts/checkstack.pl: fix no space expression between sp and offset
x86/kexec: fix incorrect argument passed to kexec_dprintk()
x86/kexec: use pr_err() instead of kexec_dprintk() when an error occurs
nilfs2: add missing set_freezable() for freezable kthread
kernel: relay: remove relay_file_splice_read dead code, doesn't work
docs: submit-checklist: remove all of "make namespacecheck"
...
are included in this merge do the following:
- Peng Zhang has done some mapletree maintainance work in the
series
"maple_tree: add mt_free_one() and mt_attr() helpers"
"Some cleanups of maple tree"
- In the series "mm: use memmap_on_memory semantics for dax/kmem"
Vishal Verma has altered the interworking between memory-hotplug
and dax/kmem so that newly added 'device memory' can more easily
have its memmap placed within that newly added memory.
- Matthew Wilcox continues folio-related work (including a few
fixes) in the patch series
"Add folio_zero_tail() and folio_fill_tail()"
"Make folio_start_writeback return void"
"Fix fault handler's handling of poisoned tail pages"
"Convert aops->error_remove_page to ->error_remove_folio"
"Finish two folio conversions"
"More swap folio conversions"
- Kefeng Wang has also contributed folio-related work in the series
"mm: cleanup and use more folio in page fault"
- Jim Cromie has improved the kmemleak reporting output in the
series "tweak kmemleak report format".
- In the series "stackdepot: allow evicting stack traces" Andrey
Konovalov to permits clients (in this case KASAN) to cause
eviction of no longer needed stack traces.
- Charan Teja Kalla has fixed some accounting issues in the page
allocator's atomic reserve calculations in the series "mm:
page_alloc: fixes for high atomic reserve caluculations".
- Dmitry Rokosov has added to the samples/ dorectory some sample
code for a userspace memcg event listener application. See the
series "samples: introduce cgroup events listeners".
- Some mapletree maintanance work from Liam Howlett in the series
"maple_tree: iterator state changes".
- Nhat Pham has improved zswap's approach to writeback in the
series "workload-specific and memory pressure-driven zswap
writeback".
- DAMON/DAMOS feature and maintenance work from SeongJae Park in
the series
"mm/damon: let users feed and tame/auto-tune DAMOS"
"selftests/damon: add Python-written DAMON functionality tests"
"mm/damon: misc updates for 6.8"
- Yosry Ahmed has improved memcg's stats flushing in the series
"mm: memcg: subtree stats flushing and thresholds".
- In the series "Multi-size THP for anonymous memory" Ryan Roberts
has added a runtime opt-in feature to transparent hugepages which
improves performance by allocating larger chunks of memory during
anonymous page faults.
- Matthew Wilcox has also contributed some cleanup and maintenance
work against eh buffer_head code int he series "More buffer_head
cleanups".
- Suren Baghdasaryan has done work on Andrea Arcangeli's series
"userfaultfd move option". UFFDIO_MOVE permits userspace heap
compaction algorithms to move userspace's pages around rather than
UFFDIO_COPY'a alloc/copy/free.
- Stefan Roesch has developed a "KSM Advisor", in the series
"mm/ksm: Add ksm advisor". This is a governor which tunes KSM's
scanning aggressiveness in response to userspace's current needs.
- Chengming Zhou has optimized zswap's temporary working memory
use in the series "mm/zswap: dstmem reuse optimizations and
cleanups".
- Matthew Wilcox has performed some maintenance work on the
writeback code, both code and within filesystems. The series is
"Clean up the writeback paths".
- Andrey Konovalov has optimized KASAN's handling of alloc and
free stack traces for secondary-level allocators, in the series
"kasan: save mempool stack traces".
- Andrey also performed some KASAN maintenance work in the series
"kasan: assorted clean-ups".
- David Hildenbrand has gone to town on the rmap code. Cleanups,
more pte batching, folio conversions and more. See the series
"mm/rmap: interface overhaul".
- Kinsey Ho has contributed some maintenance work on the MGLRU
code in the series "mm/mglru: Kconfig cleanup".
- Matthew Wilcox has contributed lruvec page accounting code
cleanups in the series "Remove some lruvec page accounting
functions".
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZZyF2wAKCRDdBJ7gKXxA
jjWjAP42LHvGSjp5M+Rs2rKFL0daBQsrlvy6/jCHUequSdWjSgEAmOx7bc5fbF27
Oa8+DxGM9C+fwqZ/7YxU2w/WuUmLPgU=
=0NHs
-----END PGP SIGNATURE-----
Merge tag 'mm-stable-2024-01-08-15-31' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
"Many singleton patches against the MM code. The patch series which are
included in this merge do the following:
- Peng Zhang has done some mapletree maintainance work in the series
'maple_tree: add mt_free_one() and mt_attr() helpers'
'Some cleanups of maple tree'
- In the series 'mm: use memmap_on_memory semantics for dax/kmem'
Vishal Verma has altered the interworking between memory-hotplug
and dax/kmem so that newly added 'device memory' can more easily
have its memmap placed within that newly added memory.
- Matthew Wilcox continues folio-related work (including a few fixes)
in the patch series
'Add folio_zero_tail() and folio_fill_tail()'
'Make folio_start_writeback return void'
'Fix fault handler's handling of poisoned tail pages'
'Convert aops->error_remove_page to ->error_remove_folio'
'Finish two folio conversions'
'More swap folio conversions'
- Kefeng Wang has also contributed folio-related work in the series
'mm: cleanup and use more folio in page fault'
- Jim Cromie has improved the kmemleak reporting output in the series
'tweak kmemleak report format'.
- In the series 'stackdepot: allow evicting stack traces' Andrey
Konovalov to permits clients (in this case KASAN) to cause eviction
of no longer needed stack traces.
- Charan Teja Kalla has fixed some accounting issues in the page
allocator's atomic reserve calculations in the series 'mm:
page_alloc: fixes for high atomic reserve caluculations'.
- Dmitry Rokosov has added to the samples/ dorectory some sample code
for a userspace memcg event listener application. See the series
'samples: introduce cgroup events listeners'.
- Some mapletree maintanance work from Liam Howlett in the series
'maple_tree: iterator state changes'.
- Nhat Pham has improved zswap's approach to writeback in the series
'workload-specific and memory pressure-driven zswap writeback'.
- DAMON/DAMOS feature and maintenance work from SeongJae Park in the
series
'mm/damon: let users feed and tame/auto-tune DAMOS'
'selftests/damon: add Python-written DAMON functionality tests'
'mm/damon: misc updates for 6.8'
- Yosry Ahmed has improved memcg's stats flushing in the series 'mm:
memcg: subtree stats flushing and thresholds'.
- In the series 'Multi-size THP for anonymous memory' Ryan Roberts
has added a runtime opt-in feature to transparent hugepages which
improves performance by allocating larger chunks of memory during
anonymous page faults.
- Matthew Wilcox has also contributed some cleanup and maintenance
work against eh buffer_head code int he series 'More buffer_head
cleanups'.
- Suren Baghdasaryan has done work on Andrea Arcangeli's series
'userfaultfd move option'. UFFDIO_MOVE permits userspace heap
compaction algorithms to move userspace's pages around rather than
UFFDIO_COPY'a alloc/copy/free.
- Stefan Roesch has developed a 'KSM Advisor', in the series 'mm/ksm:
Add ksm advisor'. This is a governor which tunes KSM's scanning
aggressiveness in response to userspace's current needs.
- Chengming Zhou has optimized zswap's temporary working memory use
in the series 'mm/zswap: dstmem reuse optimizations and cleanups'.
- Matthew Wilcox has performed some maintenance work on the writeback
code, both code and within filesystems. The series is 'Clean up the
writeback paths'.
- Andrey Konovalov has optimized KASAN's handling of alloc and free
stack traces for secondary-level allocators, in the series 'kasan:
save mempool stack traces'.
- Andrey also performed some KASAN maintenance work in the series
'kasan: assorted clean-ups'.
- David Hildenbrand has gone to town on the rmap code. Cleanups, more
pte batching, folio conversions and more. See the series 'mm/rmap:
interface overhaul'.
- Kinsey Ho has contributed some maintenance work on the MGLRU code
in the series 'mm/mglru: Kconfig cleanup'.
- Matthew Wilcox has contributed lruvec page accounting code cleanups
in the series 'Remove some lruvec page accounting functions'"
* tag 'mm-stable-2024-01-08-15-31' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (361 commits)
mm, treewide: rename MAX_ORDER to MAX_PAGE_ORDER
mm, treewide: introduce NR_PAGE_ORDERS
selftests/mm: add separate UFFDIO_MOVE test for PMD splitting
selftests/mm: skip test if application doesn't has root privileges
selftests/mm: conform test to TAP format output
selftests: mm: hugepage-mmap: conform to TAP format output
selftests/mm: gup_test: conform test to TAP format output
mm/selftests: hugepage-mremap: conform test to TAP format output
mm/vmstat: move pgdemote_* out of CONFIG_NUMA_BALANCING
mm: zsmalloc: return -ENOSPC rather than -EINVAL in zs_malloc while size is too large
mm/memcontrol: remove __mod_lruvec_page_state()
mm/khugepaged: use a folio more in collapse_file()
slub: use a folio in __kmalloc_large_node
slub: use folio APIs in free_large_kmalloc()
slub: use alloc_pages_node() in alloc_slab_page()
mm: remove inc/dec lruvec page state functions
mm: ratelimit stat flush from workingset shrinker
kasan: stop leaking stack trace handles
mm/mglru: remove CONFIG_TRANSPARENT_HUGEPAGE
mm/mglru: add dummy pmd_dirty()
...
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEe7vIQRWZI0iWSE3xu+CwddJFiJoFAmWWu9EACgkQu+CwddJF
iJpXvQf/aGL7uEY57VpTm0t4gPwoZ9r2P89HxI/nQs9XgVzDcBmVp/cC0LDvSdcm
t91kJO538KeGjMgvlhLMTEuoShH5FlPs6cOwrGAYUoAGa4NwiOpGvliGky+nNHqY
w887ZgSzVLq0UOuSvn86N6enumMvewt4V+872+OWo6O1HWOJhC0SgHTIa8QPQtwb
yZ9BghO5IqMRXiZEsSIwyO+tQHcaU6l2G5huFXzgMFUhkQqAB9KTFc3h6rYI+i80
L4ppNXo2KNPGTDRb9dA8LNMWgvmfjhCb7chs8o1zSY2PwZlkzOix7EUBLCAIbc/2
EIaFC8AsZjfT47D1t72r8QpHB+C14Q==
=J+E7
-----END PGP SIGNATURE-----
Merge tag 'slab-for-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab
Pull slab updates from Vlastimil Babka:
- SLUB: delayed freezing of CPU partial slabs (Chengming Zhou)
Freezing is an operation involving double_cmpxchg() that makes a slab
exclusive for a particular CPU. Chengming noticed that we use it also
in situations where we are not yet installing the slab as the CPU
slab, because freezing also indicates that the slab is not on the
shared list. This results in redundant freeze/unfreeze operation and
can be avoided by marking separately the shared list presence by
reusing the PG_workingset flag.
This approach neatly avoids the issues described in 9b1ea29bc0
("Revert "mm, slub: consider rest of partial list if acquire_slab()
fails"") as we can now grab a slab from the shared list in a quick
and guaranteed way without the cmpxchg_double() operation that
amplifies the lock contention and can fail.
As a result, lkp has reported 34.2% improvement of
stress-ng.rawudp.ops_per_sec
- SLAB removal and SLUB cleanups (Vlastimil Babka)
The SLAB allocator has been deprecated since 6.5 and nobody has
objected so far. We agreed at LSF/MM to wait until the next LTS,
which is 6.6, so we should be good to go now.
This doesn't yet erase all traces of SLAB outside of mm/ so some dead
code, comments or documentation remain, and will be cleaned up
gradually (some series are already in the works).
Removing the choice of allocators has already allowed to simplify and
optimize the code wiring up the kmalloc APIs to the SLUB
implementation.
* tag 'slab-for-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab: (34 commits)
mm/slub: free KFENCE objects in slab_free_hook()
mm/slub: handle bulk and single object freeing separately
mm/slub: introduce __kmem_cache_free_bulk() without free hooks
mm/slub: fix bulk alloc and free stats
mm/slub: optimize free fast path code layout
mm/slub: optimize alloc fastpath code layout
mm/slub: remove slab_alloc() and __kmem_cache_alloc_lru() wrappers
mm/slab: move kmalloc() functions from slab_common.c to slub.c
mm/slab: move kmalloc_slab() to mm/slab.h
mm/slab: move kfree() from slab_common.c to slub.c
mm/slab: move struct kmem_cache_node from slab.h to slub.c
mm/slab: move memcg related functions from slab.h to slub.c
mm/slab: move pre/post-alloc hooks from slab.h to slub.c
mm/slab: consolidate includes in the internal mm/slab.h
mm/slab: move the rest of slub_def.h to mm/slab.h
mm/slab: move struct kmem_cache_cpu declaration to slub.c
mm/slab: remove mm/slab.c and slab_def.h
mm/mempool/dmapool: remove CONFIG_DEBUG_SLAB ifdefs
mm/slab: remove CONFIG_SLAB code from slab common code
cpu/hotplug: remove CPUHP_SLAB_PREPARE hooks
...
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCZZU0CgAKCRCRxhvAZXjc
osncAQDSJK0frJL+72NqXxa4YNzivrnuw6fhp5iaDAEqxdm8ygEAoJWyh7Rmkt8G
drAXWGyGnCYqv7UgC6axLyciid7TxQg=
=vJuv
-----END PGP SIGNATURE-----
Merge tag 'vfs-6.8.mount' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs mount updates from Christian Brauner:
"This contains the work to retrieve detailed information about mounts
via two new system calls. This is hopefully the beginning of the end
of the saga that started with fsinfo() years ago.
The LWN articles in [1] and [2] can serve as a summary so we can avoid
rehashing everything here.
At LSFMM in May 2022 we got into a room and agreed on what we want to
do about fsinfo(). Basically, split it into pieces. This is the first
part of that agreement. Specifically, it is concerned with retrieving
information about mounts. So this only concerns the mount information
retrieval, not the mount table change notification, or the extended
filesystem specific mount option work. That is separate work.
Currently mounts have a 32bit id. Mount ids are already in heavy use
by libmount and other low-level userspace but they can't be relied
upon because they're recycled very quickly. We agreed that mounts
should carry a unique 64bit id by which they can be referenced
directly. This is now implemented as part of this work.
The new 64bit mount id is exposed in statx() through the new
STATX_MNT_ID_UNIQUE flag. If the flag isn't raised the old mount id is
returned. If it is raised and the kernel supports the new 64bit mount
id the flag is raised in the result mask and the new 64bit mount id is
returned. New and old mount ids do not overlap so they cannot be
conflated.
Two new system calls are introduced that operate on the 64bit mount
id: statmount() and listmount(). A summary of the api and usage can be
found on LWN as well (cf. [3]) but of course, I'll provide a summary
here as well.
Both system calls rely on struct mnt_id_req. Which is the request
struct used to pass the 64bit mount id identifying the mount to
operate on. It is extensible to allow for the addition of new
parameters and for future use in other apis that make use of mount
ids.
statmount() mimicks the semantics of statx() and exposes a set flags
that userspace may raise in mnt_id_req to request specific information
to be retrieved. A statmount() call returns a struct statmount filled
in with information about the requested mount. Supported requests are
indicated by raising the request flag passed in struct mnt_id_req in
the @mask argument in struct statmount.
Currently we do support:
- STATMOUNT_SB_BASIC:
Basic filesystem info
- STATMOUNT_MNT_BASIC
Mount information (mount id, parent mount id, mount attributes etc)
- STATMOUNT_PROPAGATE_FROM
Propagation from what mount in current namespace
- STATMOUNT_MNT_ROOT
Path of the root of the mount (e.g., mount --bind /bla /mnt returns /bla)
- STATMOUNT_MNT_POINT
Path of the mount point (e.g., mount --bind /bla /mnt returns /mnt)
- STATMOUNT_FS_TYPE
Name of the filesystem type as the magic number isn't enough due to submounts
The string options STATMOUNT_MNT_{ROOT,POINT} and STATMOUNT_FS_TYPE
are appended to the end of the struct. Userspace can use the offsets
in @fs_type, @mnt_root, and @mnt_point to reference those strings
easily.
The struct statmount reserves quite a bit of space currently for
future extensibility. This isn't really a problem and if this bothers
us we can just send a follow-up pull request during this cycle.
listmount() is given a 64bit mount id via mnt_id_req just as
statmount(). It takes a buffer and a size to return an array of the
64bit ids of the child mounts of the requested mount. Userspace can
thus choose to either retrieve child mounts for a mount in batches or
iterate through the child mounts. For most use-cases it will be
sufficient to just leave space for a few child mounts. But for big
mount tables having an iterator is really helpful. Iterating through a
mount table works by setting @param in mnt_id_req to the mount id of
the last child mount retrieved in the previous listmount() call"
Link: https://lwn.net/Articles/934469 [1]
Link: https://lwn.net/Articles/829212 [2]
Link: https://lwn.net/Articles/950569 [3]
* tag 'vfs-6.8.mount' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
add selftest for statmount/listmount
fs: keep struct mnt_id_req extensible
wire up syscalls for statmount/listmount
add listmount(2) syscall
statmount: simplify string option retrieval
statmount: simplify numeric option retrieval
add statmount(2) syscall
namespace: extract show_path() helper
mounts: keep list of mounts in an rbtree
add unique mount ID
The various errors that are possible when processing a PQAP
instruction (the absence of a driver hook, an error FROM that
hook), all correctly set the PSW condition code to 3. But if
that processing works successfully, CC0 needs to be set to
convey that everything was fine.
Fix the check so that the guest can examine the condition code
to determine whether GPR1 has meaningful data.
Fixes: e5282de931 ("s390: ap: kvm: add PQAP interception for AQIC")
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Tony Krowiak <akrowiak@linux.ibm.com>
Reviewed-by: Halil Pasic <pasic@linux.ibm.com>
Link: https://lore.kernel.org/r/20231201181657.1614645-1-farman@linux.ibm.com
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Message-Id: <20231201181657.1614645-1-farman@linux.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@linux.ibm.com>
- Use memdup_array_user() to harden against overflow.
- Unconditionally advertise KVM_CAP_DEVICE_CTRL for all architectures.
-----BEGIN PGP SIGNATURE-----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=wpT4
-----END PGP SIGNATURE-----
Merge tag 'kvm-x86-generic-6.8' of https://github.com/kvm-x86/linux into HEAD
Common KVM changes for 6.8:
- Use memdup_array_user() to harden against overflow.
- Unconditionally advertise KVM_CAP_DEVICE_CTRL for all architectures.
CONFIG_HAVE_KVM is currently used by some architectures to either
enabled the KVM config proper, or to enable host-side code that is
not part of the KVM module. However, CONFIG_KVM's "select" statement
in virt/kvm/Kconfig corresponds to a third meaning, namely to
enable common Kconfigs required by all architectures that support
KVM.
These three meanings can be replaced respectively by an
architecture-specific Kconfig, by IS_ENABLED(CONFIG_KVM), or by
a new Kconfig symbol that is in turn selected by the
architecture-specific "config KVM".
Start by introducing such a new Kconfig symbol, CONFIG_KVM_COMMON.
Unlike CONFIG_HAVE_KVM, it is selected by CONFIG_KVM, not by
architecture code, and it brings in all dependencies of common
KVM code. In particular, INTERVAL_TREE was missing in loongarch
and riscv, so that is another thing that is fixed.
Fixes: 8132d887a7 ("KVM: remove CONFIG_HAVE_KVM_EVENTFD", 2023-12-08)
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Closes: https://lore.kernel.org/all/44907c6b-c5bd-4e4a-a921-e4d3825539d8@infradead.org/
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTFp0I1jqZrAX+hPRXbK58LschIgwUCZZgrfgAKCRDbK58LschI
g87JAQDu+oUG3aWnRJi+lJTK8vGnKRuBwUxgnI5Ze99N0tuPmAEAz1gpXLYP+fKE
eqRhZGGhujdHC9if3Le+nG6nvf8Gvw0=
=KPkZ
-----END PGP SIGNATURE-----
Merge tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Daniel Borkmann says:
====================
pull-request: bpf-next 2024-01-05
We've added 40 non-merge commits during the last 2 day(s) which contain
a total of 73 files changed, 1526 insertions(+), 951 deletions(-).
The main changes are:
1) Fix a memory leak when streaming AF_UNIX sockets were inserted
into multiple sockmap slots/maps, from John Fastabend.
2) Fix gotol in s390 BPF JIT with large offsets, from Ilya Leoshkevich.
3) Fix reattachment branch in bpf_tracing_prog_attach() and reject
the request if there is no valid attach_btf, from Jiri Olsa.
4) Remove deprecated bpfilter kernel leftovers given the project
is developed in user space (https://github.com/facebook/bpfilter),
from Quentin Deslandes.
5) Relax tracing BPF program recursive attach rules given right now
it is not possible to create tracing program call cycles,
from Dmitrii Dolgov.
6) Fix excessive memory consumption for the bpf_global_percpu_ma
for systems with a large number of CPUs, from Yonghong Song.
7) Small x86 BPF JIT cleanup to reuse emit_nops instead of open-coding
memcpy of x86_nops, from Leon Hwang.
8) Follow-up for libbpf to support __arg_ctx global function argument tag
semantics to complement the merged kernel side, from Andrii Nakryiko.
9) Introduce "volatile compare" macros for BPF selftests in order
to make the latter more robust against compiler optimization,
from Alexei Starovoitov.
10) Small simplification in verifier's size checking of helper accesses
along with additional selftests, from Andrei Matei.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (40 commits)
selftests/bpf: Test re-attachment fix for bpf_tracing_prog_attach
bpf: Fix re-attachment branch in bpf_tracing_prog_attach
selftests/bpf: Add test for recursive attachment of tracing progs
bpf: Relax tracing prog recursive attach rules
bpf, x86: Use emit_nops to replace memcpy x86_nops
selftests/bpf: Test gotol with large offsets
selftests/bpf: Double the size of test_loader log
s390/bpf: Fix gotol with large offsets
bpfilter: remove bpfilter
bpf: Remove unnecessary cpu == 0 check in memalloc
selftests/bpf: add __arg_ctx BTF rewrite test
selftests/bpf: add arg:ctx cases to test_global_funcs tests
libbpf: implement __arg_ctx fallback logic
libbpf: move BTF loading step after relocation step
libbpf: move exception callbacks assignment logic into relocation step
libbpf: use stable map placeholder FDs
libbpf: don't rely on map->fd as an indicator of map being created
libbpf: use explicit map reuse flag to skip map creation steps
libbpf: make uniform use of btf__fd() accessor inside libbpf
selftests/bpf: Add a selftest with > 512-byte percpu allocation size
...
====================
Link: https://lore.kernel.org/r/20240105170105.21070-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
issues or aren't considered necessary for earlier kernel versions.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZZhbAwAKCRDdBJ7gKXxA
jiFeAQD20H8wGT9hbMUYr/PxE4rOxyDXlhnv/mZ0Av3neve4SQD/YlgCFWYpEu8G
F5rEAtq89UYE13qlgS3o9KjYOPzhtgQ=
=vZ0P
-----END PGP SIGNATURE-----
Merge tag 'mm-hotfixes-stable-2024-01-05-11-35' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc mm fixes from Andrew Morton:
"12 hotfixes.
Two are cc:stable and the remainder either address post-6.7 issues or
aren't considered necessary for earlier kernel versions"
* tag 'mm-hotfixes-stable-2024-01-05-11-35' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
mm: shrinker: use kvzalloc_node() from expand_one_shrinker_info()
mailmap: add entries for Mathieu Othacehe
MAINTAINERS: change vmware.com addresses to broadcom.com
arch/mm/fault: fix major fault accounting when retrying under per-VMA lock
mm/mglru: skip special VMAs in lru_gen_look_around()
MAINTAINERS: hand over hwpoison maintainership to Miaohe Lin
MAINTAINERS: remove hugetlb maintainer Mike Kravetz
mm: fix unmap_mapping_range high bits shift bug
mm: memcg: fix split queue list crash when large folio migration
mm: fix arithmetic for max_prop_frac when setting max_ratio
mm: fix arithmetic for bdi min_ratio
mm: align larger anonymous mappings on THP boundaries
The gotol implementation uses a wrong data type for the offset: it
should be s32, not s16.
Fixes: c690191e23 ("s390/bpf: Implement unconditional jump with 32-bit offset")
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/r/20240102193531.3169422-2-iii@linux.ibm.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
- KVM_GET_REG_LIST improvement for vector registers
- Generate ISA extension reg_list using macros in get-reg-list selftest
- Steal time account support along with selftest
-----BEGIN PGP SIGNATURE-----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=FeiG
-----END PGP SIGNATURE-----
Merge tag 'kvm-riscv-6.8-1' of https://github.com/kvm-riscv/linux into HEAD
KVM/riscv changes for 6.8 part #1
- KVM_GET_REG_LIST improvement for vector registers
- Generate ISA extension reg_list using macros in get-reg-list selftest
- Steal time account support along with selftest
Now that we are retiring the IPT action.
Reviewed-by: Victor Noguiera <victor@mojatatu.com>
Reviewed-by: Pedro Tammela <pctammela@mojatatu.com>
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
A test [1] in Android test suite started failing after [2] was merged. It
turns out that after handling a major fault under per-VMA lock, the
process major fault counter does not register that fault as major. Before
[2] read faults would be done under mmap_lock, in which case
FAULT_FLAG_TRIED flag is set before retrying. That in turn causes
mm_account_fault() to account the fault as major once retry completes.
With per-VMA locks we often retry because a fault can't be handled without
locking the whole mm using mmap_lock. Therefore such retries do not set
FAULT_FLAG_TRIED flag. This logic does not work after [2] because we can
now handle read major faults under per-VMA lock and upon retry the fact
there was a major fault gets lost. Fix this by setting FAULT_FLAG_TRIED
after retrying under per-VMA lock if VM_FAULT_MAJOR was returned. Ideally
we would use an additional VM_FAULT bit to indicate the reason for the
retry (could not handle under per-VMA lock vs other reason) but this
simpler solution seems to work, so keeping it simple.
[1] https://cs.android.com/android/platform/superproject/+/master:test/vts-testcase/kernel/api/drop_caches_prop/drop_caches_test.cpp
[2] https://lore.kernel.org/all/20231006195318.4087158-6-willy@infradead.org/
Link: https://lkml.kernel.org/r/20231226214610.109282-1-surenb@google.com
Fixes: 12214eba19 ("mm: handle read faults under the VMA lock")
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
are not considered backporting material.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZYys4AAKCRDdBJ7gKXxA
jtmaAQC+o04Ia7IfB8MIqp1p7dNZQo64x/EnGA8YjUnQ8N6IwQD+ImU7dHl9g9Oo
ROiiAbtMRBUfeJRsExX/Yzc1DV9E9QM=
=ZGcs
-----END PGP SIGNATURE-----
Merge tag 'mm-hotfixes-stable-2023-12-27-15-00' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc fixes from Andrew Morton:
"11 hotfixes. 7 are cc:stable and the other 4 address post-6.6 issues
or are not considered backporting material"
* tag 'mm-hotfixes-stable-2023-12-27-15-00' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
mailmap: add an old address for Naoya Horiguchi
mm/memory-failure: cast index to loff_t before shifting it
mm/memory-failure: check the mapcount of the precise page
mm/memory-failure: pass the folio and the page to collect_procs()
selftests: secretmem: floor the memory size to the multiple of page_size
mm: migrate high-order folios in swap cache correctly
maple_tree: do not preallocate nodes for slot stores
mm/filemap: avoid buffered read/write race to read inconsistent data
kunit: kasan_test: disable fortify string checker on kmalloc_oob_memset
kexec: select CRYPTO from KEXEC_FILE instead of depending on it
kexec: fix KEXEC_FILE dependencies
We're trying to get sched.h down to more or less just types only, not
code - rseq can live in its own header.
This helps us kill the dependency on preempt.h in sched.h.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Use the previously unused S390_ARCH_FAC_MASK_SIZE_U64 instead of
S390_ARCH_FAC_LIST_SIZE_U64 for defining the fac_mask array.
Note that both values are the same, there is no functional change.
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Janosch Frank <frankja@linux.ibm.com>
Signed-off-by: Nina Schoetterl-Glausch <nsg@linux.ibm.com>
Link: https://lore.kernel.org/r/20231219140854.1042599-4-nsg@linux.ibm.com
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Message-ID: <20231219140854.1042599-4-nsg@linux.ibm.com>
The length of the facility list accessed when interpretively executing
STFLE is the same as the hosts facility list (in case of format-0)
The memory following the facility list doesn't need to be accessible.
The current VSIE implementation accesses a fixed length that exceeds the
guest/host facility list length and can therefore wrongly inject a
validity intercept.
Instead, find out the host facility list length by running STFLE and
copy only as much as necessary when shadowing.
Acked-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Nina Schoetterl-Glausch <nsg@linux.ibm.com>
Reviewed-by: Janosch Frank <frankja@linux.ibm.com>
Link: https://lore.kernel.org/r/20231219140854.1042599-3-nsg@linux.ibm.com
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Message-ID: <20231219140854.1042599-3-nsg@linux.ibm.com>
STFLE can be interpretively executed.
This occurs when the facility list designation is unequal to zero.
Perform the check before applying the address mask instead of after.
Fixes: 66b630d5b7 ("KVM: s390: vsie: support STFLE interpretation")
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Acked-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Nina Schoetterl-Glausch <nsg@linux.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Reviewed-by: Janosch Frank <frankja@linux.ibm.com>
Link: https://lore.kernel.org/r/20231219140854.1042599-2-nsg@linux.ibm.com
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Message-ID: <20231219140854.1042599-2-nsg@linux.ibm.com>
Right now it is possible to see gmap->private being zero in
kvm_s390_vsie_gmap_notifier resulting in a crash. This is due to the
fact that we add gmap->private == kvm after creation:
static int acquire_gmap_shadow(struct kvm_vcpu *vcpu,
struct vsie_page *vsie_page)
{
[...]
gmap = gmap_shadow(vcpu->arch.gmap, asce, edat);
if (IS_ERR(gmap))
return PTR_ERR(gmap);
gmap->private = vcpu->kvm;
Let children inherit the private field of the parent.
Reported-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Fixes: a3508fbe9d ("KVM: s390: vsie: initial support for nested virtualization")
Cc: <stable@vger.kernel.org>
Cc: David Hildenbrand <david@redhat.com>
Reviewed-by: Janosch Frank <frankja@linux.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Link: https://lore.kernel.org/r/20231220125317.4258-1-borntraeger@linux.ibm.com
Only the posix timer system calls use this (when the posix timer support
is disabled, which does not actually happen in any normal case), because
they had debug code to print out a warning about missing system calls.
Get rid of that special case, and just use the standard COND_SYSCALL
interface that creates weak system call stubs that return -ENOSYS for
when the system call does not exist.
This fixes a kCFI issue with the SYS_NI() hackery:
CFI failure at int80_emulation+0x67/0xb0 (target: sys_ni_posix_timers+0x0/0x70; expected type: 0xb02b34d9)
WARNING: CPU: 0 PID: 48 at int80_emulation+0x67/0xb0
Reported-by: kernel test robot <oliver.sang@intel.com>
Reviewed-by: Sami Tolvanen <samitolvanen@google.com>
Tested-by: Sami Tolvanen <samitolvanen@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Borislav Petkov <bp@alien8.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
- Fix virtual vs physical address confusion in Storage Class Memory
(SCM) block device driver.
- Fix saving and restoring of FPU kernel context, which could lead
to corruption of vector registers 8-15.
- Update defconfigs.
-----BEGIN PGP SIGNATURE-----
iI0EABYIADUWIQQrtrZiYVkVzKQcYivNdxKlNrRb8AUCZYL8uxccYWdvcmRlZXZA
bGludXguaWJtLmNvbQAKCRDNdxKlNrRb8BlUAQDEWcaTXoHbuLEZ8DN9lVHLryOW
ACOFFLpPFlIjVj+eCwD+Ir4xzVdWOCImtNlMbsdrIcribmuzezl4nJ001Jhi6QE=
=o5b2
-----END PGP SIGNATURE-----
Merge tag 's390-6.7-4' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 fixes from Alexander Gordeev:
- Fix virtual vs physical address confusion in Storage Class Memory
(SCM) block device driver.
- Fix saving and restoring of FPU kernel context, which could lead to
corruption of vector registers 8-15
- Update defconfigs
* tag 's390-6.7-4' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390: update defconfigs
s390/vx: fix save/restore of fpu kernel context
s390/scm: fix virtual vs physical address confusion
The cleanup for the CONFIG_KEXEC Kconfig logic accidentally changed the
'depends on CRYPTO=y' dependency to a plain 'depends on CRYPTO', which
causes a link failure when all the crypto support is in a loadable module
and kexec_file support is built-in:
x86_64-linux-ld: vmlinux.o: in function `__x64_sys_kexec_file_load':
(.text+0x32e30a): undefined reference to `crypto_alloc_shash'
x86_64-linux-ld: (.text+0x32e58e): undefined reference to `crypto_shash_update'
x86_64-linux-ld: (.text+0x32e6ee): undefined reference to `crypto_shash_final'
Both s390 and x86 have this problem, while ppc64 and riscv have the
correct dependency already. On riscv, the dependency is only used for the
purgatory, not for the kexec_file code itself, which may be a bit
surprising as it means that with CONFIG_CRYPTO=m, it is possible to enable
KEXEC_FILE but then the purgatory code is silently left out.
Move this into the common Kconfig.kexec file in a way that is correct
everywhere, using the dependency on CRYPTO_SHA256=y only when the
purgatory code is available. This requires reversing the dependency
between ARCH_SUPPORTS_KEXEC_PURGATORY and KEXEC_FILE, but the effect
remains the same, other than making riscv behave like the other ones.
On s390, there is an additional dependency on CRYPTO_SHA256_S390, which
should technically not be required but gives better performance. Remove
this dependency here, noting that it was not present in the initial
Kconfig code but was brought in without an explanation in commit
71406883fd ("s390/kexec_file: Add kexec_file_load system call").
[arnd@arndb.de: fix riscv build]
Link: https://lkml.kernel.org/r/67ddd260-d424-4229-a815-e3fcfb864a77@app.fastmail.com
Link: https://lkml.kernel.org/r/20231023110308.1202042-1-arnd@kernel.org
Fixes: 6af5138083 ("x86/kexec: refactor for kernel/Kconfig.kexec")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Eric DeVolder <eric_devolder@yahoo.com>
Tested-by: Eric DeVolder <eric_devolder@yahoo.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Christian Borntraeger <borntraeger@linux.ibm.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Conor Dooley <conor@kernel.org>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
-----BEGIN PGP SIGNATURE-----
iQIzBAABCAAdFiEE+soXsSLHKoYyzcli6rmadz2vbToFAmWAz2EACgkQ6rmadz2v
bToqrw/9EwroZCc8GEHOKAlb/fzrMvn92rLo0ZW/cGN84QJPnx4zM6Zo0+fgLaaN
oqqztwMUwdzGC3uX3FfVXaaLKbJ/MeHeL9BXFZNW8zkRHciw4R7kIBhOdPnHyET7
uT+rQ4xPe1Mt7e9PjepKlSL5mEsxWfBkdUgsdn19Z2Vjdfr9mZMhYWYMJGcfTCD1
TwxHKBPhq5fN3IsshmMBB8IrRp1HStUKb65MgZ4dI22LJXxTsFkx5XMFXcmuqvkH
NhKj8jDcPEEh31bYcb6aG2Z4onw5F2lquygjk1Qyy5cyw45m/ipJKAXKdAyvJG+R
VZCWOET/9wbRwFSK5wxwihCuKghFiofK52i2PcGtXZh0PCouyZZneSJOKM0yVWKO
BvuJBxK4ETRnQyN6ZxhuJiEXG3/YMBBhyR2TX1LntVK9ct/k7qFVzATG49J39/sR
SYMbptBRj4a5oMJ1qn0nFVEDFkg0jTnTDNnsEpcz60Ayt6EsJ1XosO5yz2huf861
xgRMTKMseyG1/uV45tQ8ZPzbSPpBxjUi9Dl3coYsIm1a+y6clWUXcarONY5KVrpS
CR98DuFgl+E7dXuisd/Kz2p2KxxSPq8nytsmLlgOvrUqhwiXqB+TKN8EHgIapVOt
l1A5LrzXFTcGlT9MlaWBqEIy83Bu1nqQqbxrAFOE0k8A5jomXaw=
=stU2
-----END PGP SIGNATURE-----
Merge tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Alexei Starovoitov says:
====================
pull-request: bpf-next 2023-12-18
This PR is larger than usual and contains changes in various parts
of the kernel.
The main changes are:
1) Fix kCFI bugs in BPF, from Peter Zijlstra.
End result: all forms of indirect calls from BPF into kernel
and from kernel into BPF work with CFI enabled. This allows BPF
to work with CONFIG_FINEIBT=y.
2) Introduce BPF token object, from Andrii Nakryiko.
It adds an ability to delegate a subset of BPF features from privileged
daemon (e.g., systemd) through special mount options for userns-bound
BPF FS to a trusted unprivileged application. The design accommodates
suggestions from Christian Brauner and Paul Moore.
Example:
$ sudo mkdir -p /sys/fs/bpf/token
$ sudo mount -t bpf bpffs /sys/fs/bpf/token \
-o delegate_cmds=prog_load:MAP_CREATE \
-o delegate_progs=kprobe \
-o delegate_attachs=xdp
3) Various verifier improvements and fixes, from Andrii Nakryiko, Andrei Matei.
- Complete precision tracking support for register spills
- Fix verification of possibly-zero-sized stack accesses
- Fix access to uninit stack slots
- Track aligned STACK_ZERO cases as imprecise spilled registers.
It improves the verifier "instructions processed" metric from single
digit to 50-60% for some programs.
- Fix verifier retval logic
4) Support for VLAN tag in XDP hints, from Larysa Zaremba.
5) Allocate BPF trampoline via bpf_prog_pack mechanism, from Song Liu.
End result: better memory utilization and lower I$ miss for calls to BPF
via BPF trampoline.
6) Fix race between BPF prog accessing inner map and parallel delete,
from Hou Tao.
7) Add bpf_xdp_get_xfrm_state() kfunc, from Daniel Xu.
It allows BPF interact with IPSEC infra. The intent is to support
software RSS (via XDP) for the upcoming ipsec pcpu work.
Experiments on AWS demonstrate single tunnel pcpu ipsec reaching
line rate on 100G ENA nics.
8) Expand bpf_cgrp_storage to support cgroup1 non-attach, from Yafang Shao.
9) BPF file verification via fsverity, from Song Liu.
It allows BPF progs get fsverity digest.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (164 commits)
bpf: Ensure precise is reset to false in __mark_reg_const_zero()
selftests/bpf: Add more uprobe multi fail tests
bpf: Fail uprobe multi link with negative offset
selftests/bpf: Test the release of map btf
s390/bpf: Fix indirect trampoline generation
selftests/bpf: Temporarily disable dummy_struct_ops test on s390
x86/cfi,bpf: Fix bpf_exception_cb() signature
bpf: Fix dtor CFI
cfi: Add CFI_NOSEAL()
x86/cfi,bpf: Fix bpf_struct_ops CFI
x86/cfi,bpf: Fix bpf_callback_t CFI
x86/cfi,bpf: Fix BPF JIT call
cfi: Flip headers
selftests/bpf: Add test for abnormal cnt during multi-kprobe attachment
selftests/bpf: Don't use libbpf_get_error() in kprobe_multi_test
selftests/bpf: Add test for abnormal cnt during multi-uprobe attachment
bpf: Limit the number of kprobes when attaching program to multiple kprobes
bpf: Limit the number of uprobes when attaching program to multiple uprobes
bpf: xdp: Register generic_kfunc_set with XDP programs
selftests/bpf: utilize string values for delegate_xxx mount options
...
====================
Link: https://lore.kernel.org/r/20231219000520.34178-1-alexei.starovoitov@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The func_addr used to be NULL for indirect trampolines used by struct_ops.
Now func_addr is a valid function pointer.
Hence use BPF_TRAMP_F_INDIRECT flag to detect such condition.
Fixes: 2cd3e3772e ("x86/cfi,bpf: Fix bpf_struct_ops CFI")
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Ilya Leoshkevich <iii@linux.ibm.com>
Link: https://lore.kernel.org/bpf/20231216004549.78355-1-alexei.starovoitov@gmail.com
The KERNEL_FPR mask only contains a flag for the first eight vector
registers. However floating point registers overlay parts of the first
sixteen vector registers.
This could lead to vector register corruption if a kernel fpu context uses
any of the vector registers 8 to 15 and is interrupted or calls a
KERNEL_FPR context. If that context uses also vector registers 8 to 15,
their contents will be corrupted on return.
Luckily this is currently not a real bug, since the kernel has only one
KERNEL_FPR user with s390_adjust_jiffies() and it is only using floating
point registers 0 to 2.
Fix this by using the correct bits for KERNEL_FPR.
Fixes: 7f79695cc1 ("s390/fpu: improve kernel_fpu_[begin|end]")
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Reviewed-by: Hendrik Brueckner <brueckner@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
This code is rarely (never?) enabled by distros, and it hasn't caught
anything in decades. Let's kill off this legacy debug code.
Suggested-by: Linus Torvalds <torvalds@linuxfoundation.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Convert pgste_get_lock() and pgste_set_unlock() to C.
There is no real reasons to keep them in assembler. Having them in C
makes them more readable and maintainable, and better instructions are
used automatically when available.
Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Acked-by: Alexander Gordeev <agordeev@linux.ibm.com>
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Link: https://lore.kernel.org/r/20231205173252.62305-1-imbrenda@linux.ibm.com
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Get rid of MACHINE_HAS_VX and replace it with cpu_has_vx() which is a
short readable wrapper for "test_facility(129)".
Facility bit 129 is set if the vector facility is present. test_facility()
returns also true for all bits which are set in the architecture level set
of the cpu that the kernel is compiled for. This means that
test_facility(129) is a compile time constant which returns true for z13
and later, since the vector facility bit is part of the z13 kernel ALS.
In result the compiled code will have less runtime checks, and less code.
Reviewed-by: Hendrik Brueckner <brueckner@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Add the vector facility to the z13 architecture level set (ALS). All
hypervisors support the vector facility since many years.
Adding the facility to the ALS allows for compile time optimizations of the
kernel: if the kernel is compiled for z13 or later, all tests which verify
if the vector facility is present can return "true".
This will be implemented with a subsequent patch.
Reviewed-by: Hendrik Brueckner <brueckner@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Remove the "novx" kernel command line option: the vector code runs
without any problems since many years.
Reviewed-by: Hendrik Brueckner <brueckner@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
s390 selects ARCH_WANTS_DYNAMIC_TASK_STRUCT in order to make the size of
the task structure dependent on the availability of the vector
facility. This doesn't make sense anymore because since many years all
machines provide the vector facility.
Therefore simplify the code a bit and remove s390 support for
ARCH_WANTS_DYNAMIC_TASK_STRUCT.
Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
The save_fpu_regs() call in kvm_arch_vcpu_ioctl_get_fpu() is pointless: it
will save the current user space fpu context to the thread's save area. But
the code is accessing only the vcpu's save are / mapped register area,
which in this case are not the same.
Therefore remove the confusing call.
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
It is quite subtle to use test_fp_ctl() correctly. Therefore remove it -
instead copy whatever new floating point control (fpc) register values are
supposed to be used into its save area.
Test the validity of the new value when loading it. If the new value is
invalid, load the fpc register with zero.
This seems to be a the best way to approach this problem. Even though this
changes behavior:
- sigreturn with an invalid fpc value on the stack will succeed, and
continue with zero value, instead of returning with SIGSEGV
- ptraced processes will also use a zero value instead of letting the
request fail with -EINVAL
However all of this seems to acceptable. After all testing of the value was
only implemented to avoid that user space can crash the kernel. It is not
there to test values for validity; and the assumption is that there is no
existing user space which is doing this.
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Use READ_ONCE() to read a vcpu's floating point register value from
the memory mapped area. This avoids that, depending on code
generation, a different value is tested for validity than the one that
is used, since user space can modify the area concurrently and the
compiler is free to generate code that reads the value multiple times.
Reviewed-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
kvm_arch_vcpu_ioctl_set_fpu() allows to set the floating point control
(fpc) register of a guest cpu. The new value is tested for validity by
temporarily loading it into the fpc register.
This may lead to corruption of the fpc register of the host process:
if an interrupt happens while the value is temporarily loaded into the fpc
register, and within interrupt context floating point or vector registers
are used, the current fp/vx registers are saved with save_fpu_regs()
assuming they belong to user space and will be loaded into fp/vx registers
when returning to user space.
test_fp_ctl() restores the original user space / host process fpc register
value, however it will be discarded, when returning to user space.
In result the host process will incorrectly continue to run with the value
that was supposed to be used for a guest cpu.
Fix this by simply removing the test. There is another test right before
the SIE context is entered which will handles invalid values.
This results in a change of behaviour: invalid values will now be accepted
instead of that the ioctl fails with -EINVAL. This seems to be acceptable,
given that this interface is most likely not used anymore, and this is in
addition the same behaviour implemented with the memory mapped interface
(replace invalid values with zero) - see sync_regs() in kvm-s390.c.
Reviewed-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
If the content of the floating point control (fpc) register of a traced
process is modified with the ptrace interface the new value is tested for
validity by temporarily loading it into the fpc register.
This may lead to corruption of the fpc register of the tracing process:
if an interrupt happens while the value is temporarily loaded into the
fpc register, and within interrupt context floating point or vector
registers are used, the current fp/vx registers are saved with
save_fpu_regs() assuming they belong to user space and will be loaded into
fp/vx registers when returning to user space.
test_fp_ctl() restores the original user space fpc register value, however
it will be discarded, when returning to user space.
In result the tracer will incorrectly continue to run with the value that
was supposed to be used for the traced process.
Fix this by saving fpu register contents with save_fpu_regs() before using
test_fp_ctl().
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Instead of using local_mcck_disable() / local_mcck_enable() implement and
use local_mcck_save() / local_mcck_restore() to disable machine checks, and
restoring the previous state.
The problem with using local_mcck_disable() / local_mcck_enable() is that
there is an assumption that machine checks are always enabled. While this
is currently the case the code still looks quite odd, readers need to
double check if the code is correct.
In order to increase readability save and then restore the old machine
check mask bit, instead of assuming that it must have been enabled.
Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
The kernel starts with machine checks disabled (machine check mask bit in
the PSW is zero), and machine checks are enabled when trap_init() is
called. The rationale is that this allows to assume that the system is
initialized up to a certain point before the machine check handler may be
invoked.
However the implementation is incomplete: all new PSW masks in lowcore have
the machine check mask bit. This means that e.g. for any early program
check machine checks are enabled within the program check handler. This
contradicts the whole point of enabling machine checks at a single place.
Change this and initialize all new PSWs in lowcore so they have the machine
check mask bit not set. Set the bit in all masks in trap_init(). This way
machine check enabling is consistent.
Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Change local_ctl_set_bit() and local_ctl_clear_bit() so they return the
previous value of the to be changed control register. This is useful if a
bit is only changed temporarily and the previous content needs to be
restored.
Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
When building with -Wmissing-prototypes without CONFIG_GENERIC_BUG, there
is a warning about a missing prototype for is_valid_bugaddr():
arch/s390/kernel/traps.c:46:5: warning: no previous prototype for 'is_valid_bugaddr' [-Wmissing-prototypes]
46 | int is_valid_bugaddr(unsigned long addr)
| ^~~~~~~~~~~~~~~~
The prototype is only declared with CONFIG_GENERIC_BUG, so only define the
function under the same condition to clear up the warning, which matches
other architectures.
Link: https://lkml.kernel.org/r/20231130-s390-missing-prototypes-v1-2-799d3cf07fb7@kernel.org
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Christian Borntraeger <borntraeger@linux.ibm.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Jan Höppner <hoeppner@linux.ibm.com>
Cc: Stefan Haberland <sth@linux.ibm.com>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
All platforms with a kernel irqchip have support for irqfd. Unify the
two configuration items so that userspace can expect to use irqfd to
inject interrupts into the irqchip.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
virt/kvm/eventfd.c is compiled unconditionally, meaning that the ioeventfds
member of struct kvm is accessed unconditionally. CONFIG_HAVE_KVM_EVENTFD
therefore must be defined for KVM common code to compile successfully,
remove it.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
-----BEGIN PGP SIGNATURE-----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=2oOa
-----END PGP SIGNATURE-----
Merge tag 'kvm-s390-master-6.7-1' of https://git.kernel.org/pub/scm/linux/kernel/git/kvms390/linux into kvm-master
Two small but important bugfixes.
When processing the last block, the s390 ctr code will always read
a whole block, even if there isn't a whole block of data left. Fix
this by using the actual length left and copy it into a buffer first
for processing.
Fixes: 0200f3ecc1 ("crypto: s390 - add System z hardware support for CTR mode")
Cc: <stable@vger.kernel.org>
Reported-by: Guangwu Zhang <guazhang@redhat.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Reviewd-by: Harald Freudenberger <freude@de.ibm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This helper will be used to calculate the size of the trampoline before
allocating the memory.
arch_prepare_bpf_trampoline() for arm64 and riscv64 can use
arch_bpf_trampoline_size() to check the trampoline fits in the image.
OTOH, arch_prepare_bpf_trampoline() for s390 has to call the JIT process
twice, so it cannot use arch_bpf_trampoline_size().
Signed-off-by: Song Liu <song@kernel.org>
Acked-by: Ilya Leoshkevich <iii@linux.ibm.com>
Tested-by: Ilya Leoshkevich <iii@linux.ibm.com> # on s390x
Acked-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Björn Töpel <bjorn@rivosinc.com>
Tested-by: Björn Töpel <bjorn@rivosinc.com> # on riscv
Link: https://lore.kernel.org/r/20231206224054.492250-6-song@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>