Setting this flag on a filesystem results in validity checks being
skipped when writing bkeys. This flag will be used by tooling that
deliberately injects corruption into a filesystem in order to exercise
fsck. It shouldn't be set outside of testing/debugging code.
Signed-off-by: Thomas Bertschinger <tahbertschinger@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
We now have a small bitmap in the member info section of the superblock
for "regions that have btree nodes", so that if we ever have to scan for
btree nodes in repair we don't have to scan the whole device(s).
This tweaks the allocator to prefer allocating from regions that are
already marked in this bitmap.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
This is needed for the next patch - the write submit path has to be able
to allocate a replica bio even when we weren't able to get a ref on the
device.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
This unifies the online and offline btree gc passes; we're not yet
running it online.
We now iterate over one level of the btree at a time - the same as
check_extents_to_backpointers(); this ordering preserves order of keys
regardless of btree splits and merges, which will be important when we
re-enable online gc.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
looping when we change a bucket gen is not ideal - it means we risk
failing if we'd go into an infinite loop, and it's better to make
forward progress even if fsck doesn't fix everything.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Since btree_ptr_v2, we no longer require the journal seq blacklist table
for skipping blacklisted bsets (btree node entries); the pointer to a
given node indicates how much data is present.
Therefore there's no longer any need for journal seq blacklist gc to
walk the btree - we can prune entries older than journal last_seq.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
This is a nice cleanup - and we've also been having problems with
kthread creation in the mount path.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
When the snapshots btree is going, we'll have to delete huge amounts of
data - unless we can reconstruct it by looking at the keys that refer to
it.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
If a btree root or interior btree node goes bad, we're going to lose a
lot of data, unless we can recover the nodes that it pointed to by
scanning.
Fortunately btree node headers are fully self describing, and
additionally the magic number is xored with the filesytem UUID, so we
can do so safely.
This implements the scanning - next patch will rework topology repair to
make use of the found nodes.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
We've grown a fair amount of code for managing recovery passes; tracking
which ones we're running, which ones need to be run, and flagging in the
superblock which ones need to be run on the next recovery.
So it's worth splitting out into its own file, this code is pretty
different from the code in recovery.c.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
We need to add bounds checking for snapshot table accesses - it turns
out there are cases where we do need to use the snapshots table before
fsck checks have completed (and indeed, fsck may not have been run).
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
This fixes a deadlock due to using btree_interior_update_worker for non
interior updates - async btree node rewrites were blocking, and then
blocking other interior updates.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Currently, struct time_stats has the optional ability to quantize the
information that it collects. This is /probably/ useful for callers who
want to see quantized information, but it more than doubles the size of
the structure from 224 bytes to 464. For users who don't care about
that (e.g. upcoming xfs patches) and want to avoid wasting 240 bytes per
counter, split the two into separate pieces.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Buckets usually can't be discarded until the transaction that made them
empty has been committed in the journal.
Tracing has indicated that we're queuing the discard worker excessively,
only for it to skip over many buckets that are still waiting on a
journal commit, discarding only one or two buckets per iteration.
We want to switch to only queuing the discard worker after a journal
flush write, but there's an important optimization we need to preserve:
if a bucket becomes empty and it was never committed in the journal
while it was in use, we want to discard it and reuse it right away -
since overwriting it before the previous writes are flushed from the
device cache eans those writes only cost bus bandwidth.
So, this patch implements a fast path for buckets that can be discarded
right away. We need new locking between the two discard workers; the new
list of buckets being discarded provides that locking.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Add a btree to record a parent -> child subvolume relationships,
according to the filesystem heirarchy.
The subvolume_children btree is a bitset btree: if a bit is set at pos
p, that means p.offset is a child of subvolume p.inode.
This will be used for efficiently listing subvolumes, as well as
recursive deletion.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
This prevents going emergency read only when the user has specified
replicas_required > replicas.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
bcachefs btree nodes are big - typically 256k - and btree roots are
pinned in memory. As we're now up to 18 btrees, we now have significant
memory overhead in mostly empty btree roots.
And in the future we're going to start enforcing that certain btree node
boundaries exist, to solve lock contention issues - analagous to XFS's
AGIs.
Thus, we need to start allocating smaller btree node buffers when we
can. This patch changes code that refers to the filesystem constant
c->opts.btree_node_size to refer to the btree node buffer size -
btree_buf_bytes() - where appropriate.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Seeing weird latency issues in the btree node read path - add one
bch2_btree_node_read_done().
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
BCH_FS_fsck_done -> BCH_FS_fsck_running; set when we might be fixing
fsck errors. Also; set fix_errors to ask by default when fsck is
running.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
The previous patch fixed a bug in allocation path error handling, and it
would've been noticed sooner had it been logged properly.
Generally speaking, errors that shouldn't happen in normal operation and
are being returned up the stack should be logged: the write path was
already logging IO errors, but non IO errors were missed.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Previosuly, the transaction commit path would have to add keys to the
btree write buffer as a separate operation, requiring additional global
synchronization.
This patch introduces a new journal entry type, which indicates that the
keys need to be copied into the btree write buffer prior to being
written out. We switch the journal entry type back to
JSET_ENTRY_btree_keys prior to write, so this is not an on disk format
change.
Flushing the btree write buffer may require pulling keys out of journal
entries yet to be written, and quiescing outstanding journal
reservations; we previously added journal->buf_lock for synchronization
with the journal write path.
We also can't put strict bounds on the number of keys in the journal
destined for the write buffer, which means we might overflow the size of
the preallocated buffer and have to reallocate - this introduces a
potentially fatal memory allocation failure. This is something we'll
have to watch for, if it becomes an issue in practice we can do
additional mitigation.
The transaction commit path no longer has to explicitly check if the
write buffer is full and wait on flushing; this is another performance
optimization. Instead, when the btree write buffer is close to full we
change the journal watermark, so that only reservations for journal
reclaim are allowed.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Instead of using a darray, we now allocate journal entries for the
transaction commit path with our normal bump allocator - with an inlined
fastpath, and using btree_transaction_stats to remember how much to
initially allocate so as to avoid transaction restarts.
This is prep work for converting write buffer updates to use this
mechanism.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
c->curr_recovery_pass can go backwards; this adds a non rewinding
version, c->recovery_pass_done.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
This adds a new ioctl for running fsck on a mounted, in use filesystem.
This reuses the fsck_thread code from the previous patch for running
fsck on an offline, unmounted filesystem, so that log messages for the
fsck thread are redirected to userspace.
Only one running fsck instance is allowed at a time; a new semaphore
(since the lock will be taken by one thread and released by another) is
added for this.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Add a new helper for running online recovery passes - i.e. online fsck.
This is a subset of our normal recovery passes, and does not - for now -
use or follow c->curr_recovery_pass.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Upcoming patches are going to add two new ioctls for running fsck in the
kernel, but pretending that we're running our normal userspace fsck.
This patch adds some plumbing for redirecting our normal log messages
away from the dmesg log to a thread_with_file file descriptor - via a
struct log_output, which will be consumed by the fsck f_op's read method.
The new ioctls will allow for running fsck in the kernel against an
offline filesystem (without mounting it), and an online filesystem. For
an offline filesystem we need a way to pass in a pointer to the
log_output, which is done via a new hidden opts.h option.
For online fsck, we can set c->output directly, but only want to
redirect log messages from the thread running fsck - hence the new
c->output_filter method.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Add a new refcount for async ops that don't necessarily need the fs to
be RW, with similar lifetime/rules otherwise as c->writes.
To be used by online fsck.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
__bch2_btree_write_buffer_flush() now assumes a write ref is already
held (as called by the transaction commit path); and the wrappers
bch2_write_buffer_flush() and flush_sync() take an explicit write ref.
This means internally the write buffer code can always use
BTREE_INSERT_NOCHECK_RW, instead of in the previous code passing flags
around and hoping the NOCHECK_RW flag was always carried around
correctly.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Now we can print out filesystem flags in sysfs, useful for debugging
various "what's my filesystem doing" issues.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
This introduces a new helper for connecting time_stats to state changes,
i.e. when taking journal reservations is blocked for some reason.
We use this to track separately the different reasons the journal might
be blocked - i.e. space in the journal full, or the journal pin fifo
full.
Also do some cleanup and improvements on the time stats code.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Add two new superblock fields. Since the main section of the superblock
is now fully, we have to add a new variable length section for them -
bch_sb_field_ext.
- recovery_passes_requried: recovery passes that must be run on the
next mount
- errors_silent: errors that will be silently fixed
These are to improve upgrading and dwongrading: these fields won't be
cleared until after recovery successfully completes, so there won't be
any issues with crashing partway through an upgrade or a downgrade.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
zstd apparently lies about the size of the compression workspace it
requires; if we double it compression succeeds.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
The btree iterator code overlays keys from the journal until journal
replay is finished; since we're now starting copygc/rebalance etc.
before replay is finished, this is multithreaded access and thus needs
refcounting.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Transform zero-length array `entries` into a proper flexible-array
member in `struct journal_seq_blacklist_table`; and fix the following
-Warray-bounds warnings:
fs/bcachefs/journal_seq_blacklist.c:148:26: warning: array subscript idx is outside array bounds of 'struct journal_seq_blacklist_table_entry[0]' [-Warray-bounds=]
fs/bcachefs/journal_seq_blacklist.c:150:30: warning: array subscript idx is outside array bounds of 'struct journal_seq_blacklist_table_entry[0]' [-Warray-bounds=]
fs/bcachefs/journal_seq_blacklist.c:154:27: warning: array subscript idx is outside array bounds of 'struct journal_seq_blacklist_table_entry[0]' [-Warray-bounds=]
fs/bcachefs/journal_seq_blacklist.c:176:27: warning: array subscript i is outside array bounds of 'struct journal_seq_blacklist_table_entry[0]' [-Warray-bounds=]
fs/bcachefs/journal_seq_blacklist.c:177:27: warning: array subscript i is outside array bounds of 'struct journal_seq_blacklist_table_entry[0]' [-Warray-bounds=]
fs/bcachefs/journal_seq_blacklist.c:297:34: warning: array subscript i is outside array bounds of 'struct journal_seq_blacklist_table_entry[0]' [-Warray-bounds=]
fs/bcachefs/journal_seq_blacklist.c:298:34: warning: array subscript i is outside array bounds of 'struct journal_seq_blacklist_table_entry[0]' [-Warray-bounds=]
fs/bcachefs/journal_seq_blacklist.c:300:31: warning: array subscript i is outside array bounds of 'struct journal_seq_blacklist_table_entry[0]' [-Warray-bounds=]
This results in no differences in binary output.
This helps with the ongoing efforts to globally enable -Warray-bounds.
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Thomas Bertschinger