The following variables controlled by the sysfs interface are of type
int and are normally used in the range [0, INT_MAX], but are declared as
attr_pointer_ui, and thus may be set to values that exceed INT_MAX and
result in overflows to get negative values.
err_ratelimit_burst
msg_ratelimit_burst
warning_ratelimit_burst
err_ratelimit_interval_ms
msg_ratelimit_interval_ms
warning_ratelimit_interval_ms
Therefore, we add attr_pointer_pi (aka positive int attr pointer) with a
value range of 0-INT_MAX to avoid overflow.
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20240319113325.3110393-7-libaokun1@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
The s_mb_best_avail_max_trim_order is of type unsigned int, and has a
range of values well beyond the normal use of the mb_order. Although the
mballoc code is careful enough that large numbers don't matter there, but
this can mislead the sysadmin into thinking that it's normal to set such
values. Hence add a new attr_id attr_mb_order with values in the range
[0, 64] to avoid storing garbage values and make us more resilient to
surprises in the future.
Suggested-by: Jan Kara <jack@suse.cz>
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20240319113325.3110393-6-libaokun1@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
We can trigger a slab-out-of-bounds with the following commands:
mkfs.ext4 -F /dev/$disk 10G
mount /dev/$disk /tmp/test
echo 2147483647 > /sys/fs/ext4/$disk/mb_group_prealloc
echo test > /tmp/test/file && sync
==================================================================
BUG: KASAN: slab-out-of-bounds in ext4_mb_find_good_group_avg_frag_lists+0x8a/0x200 [ext4]
Read of size 8 at addr ffff888121b9d0f0 by task kworker/u2:0/11
CPU: 0 PID: 11 Comm: kworker/u2:0 Tainted: GL 6.7.0-next-20240118 #521
Call Trace:
dump_stack_lvl+0x2c/0x50
kasan_report+0xb6/0xf0
ext4_mb_find_good_group_avg_frag_lists+0x8a/0x200 [ext4]
ext4_mb_regular_allocator+0x19e9/0x2370 [ext4]
ext4_mb_new_blocks+0x88a/0x1370 [ext4]
ext4_ext_map_blocks+0x14f7/0x2390 [ext4]
ext4_map_blocks+0x569/0xea0 [ext4]
ext4_do_writepages+0x10f6/0x1bc0 [ext4]
[...]
==================================================================
The flow of issue triggering is as follows:
// Set s_mb_group_prealloc to 2147483647 via sysfs
ext4_mb_new_blocks
ext4_mb_normalize_request
ext4_mb_normalize_group_request
ac->ac_g_ex.fe_len = EXT4_SB(sb)->s_mb_group_prealloc
ext4_mb_regular_allocator
ext4_mb_choose_next_group
ext4_mb_choose_next_group_best_avail
mb_avg_fragment_size_order
order = fls(len) - 2 = 29
ext4_mb_find_good_group_avg_frag_lists
frag_list = &sbi->s_mb_avg_fragment_size[order]
if (list_empty(frag_list)) // Trigger SOOB!
At 4k block size, the length of the s_mb_avg_fragment_size list is 14,
but an oversized s_mb_group_prealloc is set, causing slab-out-of-bounds
to be triggered by an attempt to access an element at index 29.
Add a new attr_id attr_clusters_in_group with values in the range
[0, sbi->s_clusters_per_group] and declare mb_group_prealloc as
that type to fix the issue. In addition avoid returning an order
from mb_avg_fragment_size_order() greater than MB_NUM_ORDERS(sb)
and reduce some useless loops.
Fixes: 7e170922f0 ("ext4: Add allocation criteria 1.5 (CR1_5)")
CC: stable@vger.kernel.org
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Link: https://lore.kernel.org/r/20240319113325.3110393-5-libaokun1@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Refactor out the function ext4_generic_attr_show() to handle the reading
of values of various common types, with no functional changes.
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20240319113325.3110393-4-libaokun1@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Refactor out the function ext4_generic_attr_store() to handle the setting
of values of various common types, with no functional changes.
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20240319113325.3110393-3-libaokun1@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
When setting values of type unsigned int through sysfs, we use kstrtoul()
to parse it and then truncate part of it as the final set value, when the
set value is greater than UINT_MAX, the set value will not match what we
see because of the truncation. As follows:
$ echo 4294967296 > /sys/fs/ext4/sda/mb_max_linear_groups
$ cat /sys/fs/ext4/sda/mb_max_linear_groups
0
So we use kstrtouint() to parse the attr_pointer_ui type to avoid the
inconsistency described above. In addition, a judgment is added to avoid
setting s_resv_clusters less than 0.
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20240319113325.3110393-2-libaokun1@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
mballoc criterias have historically been called by numbers
like CR0, CR1... however this makes it confusing to understand
what each criteria is about.
Change these criterias from numbers to symbolic names and add
relevant comments. While we are at it, also reformat and add some
comments to ext4_seq_mb_stats_show() for better readability.
Additionally, define CR_FAST which signifies the criteria
below which we can make quicker decisions like:
* quitting early if (free block < requested len)
* avoiding to scan free extents smaller than required len.
* avoiding to initialize buddy cache and work with existing cache
* limiting prefetches
Suggested-by: Jan Kara <jack@suse.cz>
Signed-off-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Link: https://lore.kernel.org/r/a2dc6ec5aea5e5e68cf8e788c2a964ffead9c8b0.1685449706.git.ojaswin@linux.ibm.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
CR1_5 aims to optimize allocations which can't be satisfied in CR1. The
fact that we couldn't find a group in CR1 suggests that it would be
difficult to find a continuous extent to compleltely satisfy our
allocations. So before falling to the slower CR2, in CR1.5 we
proactively trim the the preallocations so we can find a group with
(free / fragments) big enough. This speeds up our allocation at the
cost of slightly reduced preallocation.
The patch also adds a new sysfs tunable:
* /sys/fs/ext4/<partition>/mb_cr1_5_max_trim_order
This controls how much CR1.5 can trim a request before falling to CR2.
For example, for a request of order 7 and max trim order 2, CR1.5 can
trim this upto order 5.
Suggested-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Signed-off-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Link: https://lore.kernel.org/r/150fdf65c8e4cc4dba71e020ce0859bcf636a5ff.1685449706.git.ojaswin@linux.ibm.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Earlier, inode PAs were stored in a linked list. This caused a need to
periodically trim the list down inorder to avoid growing it to a very
large size, as this would severly affect performance during list
iteration.
Recent patches changed this list to an rbtree, and since the tree scales
up much better, we no longer need to have the trim functionality, hence
remove it.
Signed-off-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/c409addceaa3ade4b40328e28e3b54b2f259689e.1679731817.git.ojaswin@linux.ibm.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Since commit ee6d3dd4ed ("driver core: make kobj_type constant.")
the driver core allows the usage of const struct kobj_type.
Take advantage of this to constify the structure definitions to prevent
modification at runtime.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230209-kobj_type-ext4-v1-1-6865fb05c1f8@weissschuh.net
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
With clang's kernel control flow integrity (kCFI, CONFIG_CFI_CLANG),
indirect call targets are validated against the expected function
pointer prototype to make sure the call target is valid to help mitigate
ROP attacks. If they are not identical, there is a failure at run time,
which manifests as either a kernel panic or thread getting killed.
ext4_feat_ktype was setting the "release" handler to "kfree", which
doesn't have a matching function prototype. Add a simple wrapper
with the correct prototype.
This was found as a result of Clang's new -Wcast-function-type-strict
flag, which is more sensitive than the simpler -Wcast-function-type,
which only checks for type width mismatches.
Note that this code is only reached when ext4 is a loadable module and
it is being unloaded:
CFI failure at kobject_put+0xbb/0x1b0 (target: kfree+0x0/0x180; expected type: 0x7c4aa698)
...
RIP: 0010:kobject_put+0xbb/0x1b0
...
Call Trace:
<TASK>
ext4_exit_sysfs+0x14/0x60 [ext4]
cleanup_module+0x67/0xedb [ext4]
Fixes: b99fee58a2 ("ext4: create ext4_feat kobject dynamically")
Cc: Theodore Ts'o <tytso@mit.edu>
Cc: Eric Biggers <ebiggers@kernel.org>
Cc: stable@vger.kernel.org
Build-tested-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Link: https://lore.kernel.org/r/20230103234616.never.915-kees@kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Eric Biggers <ebiggers@google.com>
Link: https://lore.kernel.org/r/20230104210908.gonna.388-kees@kernel.org
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Turn the CONFIG_UNICODE symbol into a tristate that generates some always
built in code and remove the confusing CONFIG_UNICODE_UTF8_DATA symbol.
Note that a lot of the IS_ENABLED() checks could be turned from cpp
statements into normal ifs, but this change is intended to be fairly
mechanic, so that should be cleaned up later.
Fixes: 2b3d047870 ("unicode: Add utf8-data module")
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Reviewed-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Gabriel Krisman Bertazi <krisman@collabora.com>
Ext4 has an optimization mechanism for batched disacrd (FITRIM) that
should help speed up subsequent calls of FITRIM ioctl by skipping the
groups that were previously trimmed. However because the FITRIM allows
to set the minimum size of an extent to trim, ext4 stores the last
minimum extent size and only avoids trimming the group if it was
previously trimmed with minimum extent size equal to, or smaller than
the current call.
There is currently no way to bypass the optimization without
umount/mount cycle. This becomes a problem when the file system is
live migrated to a different storage, because the optimization will
prevent possibly useful discard calls to the storage.
Fix it by exporting the s_last_trim_minblks via sysfs interface which
will allow us to set the minimum size to the number of blocks larger
than subsequent FITRIM call, effectively bypassing the optimization.
By setting the s_last_trim_minblks to ULONG_MAX the optimization will be
effectively cleared regardless of the previous state, or file system
configuration.
For example:
getconf ULONG_MAX > /sys/fs/ext4/dm-1/last_trim_minblks
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Reported-by: Laurent GUERBY <laurent@guerby.net>
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
Link: https://lore.kernel.org/r/20211103145122.17338-2-lczerner@redhat.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
coccicheck complains about the use of snprintf() in sysfs show functions.
Fix the coccicheck warning:
WARNING: use scnprintf or sprintf.
Use sysfs_emit instead of scnprintf or sprintf makes more sense.
Signed-off-by: Qing Wang <wangqing@vivo.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/1634095731-4528-1-git-send-email-wangqing@vivo.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
After s_error_count is incremented, signal the change in the
corresponding sysfs attribute via sysfs_notify. This allows userspace to
poll() on changes to /sys/fs/ext4/*/errors_count.
[ Moved call of ext4_notify_error_sysfs() to flush_stashed_error_work()
to avoid BUG's caused by calling sysfs_notify trying to sleep after
being called from an invalid context. -- TYT ]
Signed-off-by: Jonathan Davies <jonathan.davies@nutanix.com>
Link: https://lore.kernel.org/r/20210611140209.28903-1-jonathan.davies@nutanix.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Instead of traversing through groups linearly, scan groups in specific
orders at cr 0 and cr 1. At cr 0, we want to find groups that have the
largest free order >= the order of the request. So, with this patch,
we maintain lists for each possible order and insert each group into a
list based on the largest free order in its buddy bitmap. During cr 0
allocation, we traverse these lists in the increasing order of largest
free orders. This allows us to find a group with the best available cr
0 match in constant time. If nothing can be found, we fallback to cr 1
immediately.
At CR1, the story is slightly different. We want to traverse in the
order of increasing average fragment size. For CR1, we maintain a rb
tree of groupinfos which is sorted by average fragment size. Instead
of traversing linearly, at CR1, we traverse in the order of increasing
average fragment size, starting at the most optimal group. This brings
down cr 1 search complexity to log(num groups).
For cr >= 2, we just perform the linear search as before. Also, in
case of lock contention, we intermittently fallback to linear search
even in CR 0 and CR 1 cases. This allows us to proceed during the
allocation path even in case of high contention.
There is an opportunity to do optimization at CR2 too. That's because
at CR2 we only consider groups where bb_free counter (number of free
blocks) is greater than the request extent size. That's left as future
work.
All the changes introduced in this patch are protected under a new
mount option "mb_optimize_scan".
With this patchset, following experiment was performed:
Created a highly fragmented disk of size 65TB. The disk had no
contiguous 2M regions. Following command was run consecutively for 3
times:
time dd if=/dev/urandom of=file bs=2M count=10
Here are the results with and without cr 0/1 optimizations introduced
in this patch:
|---------+------------------------------+---------------------------|
| | Without CR 0/1 Optimizations | With CR 0/1 Optimizations |
|---------+------------------------------+---------------------------|
| 1st run | 5m1.871s | 2m47.642s |
| 2nd run | 2m28.390s | 0m0.611s |
| 3rd run | 2m26.530s | 0m1.255s |
|---------+------------------------------+---------------------------|
Signed-off-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com>
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
Link: https://lore.kernel.org/r/20210401172129.189766-6-harshadshirwadkar@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
This adds support for encryption with casefolding.
Since the name on disk is case preserving, and also encrypted, we can no
longer just recompute the hash on the fly. Additionally, to avoid
leaking extra information from the hash of the unencrypted name, we use
siphash via an fscrypt v2 policy.
The hash is stored at the end of the directory entry for all entries
inside of an encrypted and casefolded directory apart from those that
deal with '.' and '..'. This way, the change is backwards compatible
with existing ext4 filesystems.
[ Changed to advertise this feature via the file:
/sys/fs/ext4/features/encrypted_casefold -- TYT ]
Signed-off-by: Daniel Rosenberg <drosen@google.com>
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
Link: https://lore.kernel.org/r/20210319073414.1381041-2-drosen@google.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
When generic/371 is run on kvm-xfstests using 5.10 and 5.11 kernels, it
fails at significant rates on the two test scenarios that disable
delayed allocation (ext3conv and data_journal) and force actual block
allocation for the fallocate and pwrite functions in the test. The
failure rate on 5.10 for both ext3conv and data_journal on one test
system typically runs about 85%. On 5.11, the failure rate on ext3conv
sometimes drops to as low as 1% while the rate on data_journal
increases to nearly 100%.
The observed failures are largely due to ext4_should_retry_alloc()
cutting off block allocation retries when s_mb_free_pending (used to
indicate that a transaction in progress will free blocks) is 0.
However, free space is usually available when this occurs during runs
of generic/371. It appears that a thread attempting to allocate
blocks is just missing transaction commits in other threads that
increase the free cluster count and reset s_mb_free_pending while
the allocating thread isn't running. Explicitly testing for free space
availability avoids this race.
The current code uses a post-increment operator in the conditional
expression that determines whether the retry limit has been exceeded.
This means that the conditional expression uses the value of the
retry counter before it's increased, resulting in an extra retry cycle.
The current code actually retries twice before hitting its retry limit
rather than once.
Increasing the retry limit to 3 from the current actual maximum retry
count of 2 in combination with the change described above reduces the
observed failure rate to less that 0.1% on both ext3conv and
data_journal with what should be limited impact on users sensitive to
the overhead caused by retries.
A per filesystem percpu counter exported via sysfs is added to allow
users or developers to track the number of times the retry limit is
exceeded without resorting to debugging methods. This should provide
some insight into worst case retry behavior.
Signed-off-by: Eric Whitney <enwlinux@gmail.com>
Link: https://lore.kernel.org/r/20210218151132.19678-1-enwlinux@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Use struct block_device to lookup partitions on a disk. This removes
all usage of struct hd_struct from the I/O path.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Acked-by: Coly Li <colyli@suse.de> [bcache]
Acked-by: Chao Yu <yuchao0@huawei.com> [f2fs]
Signed-off-by: Jens Axboe <axboe@kernel.dk>
In the scenario of writing sparse files, the per-inode prealloc list may
be very long, resulting in high overhead for ext4_mb_use_preallocated().
To circumvent this problem, we limit the maximum length of per-inode
prealloc list to 512 and allow users to modify it.
After patching, we observed that the sys ratio of cpu has dropped, and
the system throughput has increased significantly. We created a process
to write the sparse file, and the running time of the process on the
fixed kernel was significantly reduced, as follows:
Running time on unfixed kernel：
[root@TENCENT64 ~]# time taskset 0x01 ./sparse /data1/sparce.dat
real 0m2.051s
user 0m0.008s
sys 0m2.026s
Running time on fixed kernel：
[root@TENCENT64 ~]# time taskset 0x01 ./sparse /data1/sparce.dat
real 0m0.471s
user 0m0.004s
sys 0m0.395s
Signed-off-by: Chunguang Xu <brookxu@tencent.com>
Link: https://lore.kernel.org/r/d7a98178-056b-6db5-6bce-4ead23f4a257@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
This numbers can be analized by system automation similar to errors_count.
In ideal world it would be nice to have separate counters for different
log-levels, but this makes this patch too intrusive.
Signed-off-by: Dmitry Monakhov <dmtrmonakhov@yandex-team.ru>
Link: https://lore.kernel.org/r/20200725123313.4467-1-dmtrmonakhov@yandex-team.ru
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
This should significantly improve bitmap loading, especially for flex
groups as it tries to load all bitmaps within a flex.group instead of
one by one synchronously.
Prefetching is done in 8 * flex_bg groups, so it should be 8
read-ahead reads for a single allocating thread. At the end of
allocation the thread waits for read-ahead completion and initializes
buddy information so that read-aheads are not lost in case of memory
pressure.
At cr=0 the number of prefetching IOs is limited per allocation
context to prevent a situation when mballoc loads thousands of bitmaps
looking for a perfect group and ignoring groups with good chunks.
Together with the patch "ext4: limit scanning of uninitialized groups"
the mount time (which includes few tiny allocations) of a 1PB
filesystem is reduced significantly:
0% full 50%-full unpatched patched
mount time 33s 9279s 563s
[ Restructured by tytso; removed the state flags in the allocation
context, so it can be used to lazily prefetch the allocation bitmaps
immediately after the file system is mounted. Skip prefetching
block groups which are uninitialized. Finally pass in the
REQ_RAHEAD flag to the block layer while prefetching. ]
Signed-off-by: Alex Zhuravlev <bzzz@whamcloud.com>
Reviewed-by: Andreas Dilger <adilger@whamcloud.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
v1 encryption policies are deprecated in favor of v2, and some new
features (e.g. encryption+casefolding) are only being added for v2.
Therefore, the "test_dummy_encryption" mount option (which is used for
encryption I/O testing with xfstests) needs to support v2 policies.
To do this, extend its syntax to be "test_dummy_encryption=v1" or
"test_dummy_encryption=v2". The existing "test_dummy_encryption" (no
argument) also continues to be accepted, to specify the default setting
-- currently v1, but the next patch changes it to v2.
To cleanly support both v1 and v2 while also making it easy to support
specifying other encryption settings in the future (say, accepting
"$contents_mode:$filenames_mode:v2"), make ext4 and f2fs maintain a
pointer to the dummy fscrypt_context rather than using mount flags.
To avoid concurrency issues, don't allow test_dummy_encryption to be set
or changed during a remount. (The former restriction is new, but
xfstests doesn't run into it, so no one should notice.)
Tested with 'gce-xfstests -c {ext4,f2fs}/encrypt -g auto'. On ext4,
there are two regressions, both of which are test bugs: ext4/023 and
ext4/028 fail because they set an xattr and expect it to be stored
inline, but the increase in size of the fscrypt_context from
24 to 40 bytes causes this xattr to be spilled into an external block.
Link: https://lore.kernel.org/r/20200512233251.118314-4-ebiggers@kernel.org
Acked-by: Jaegeuk Kim <jaegeuk@kernel.org>
Reviewed-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Eric Biggers <ebiggers@google.com>
These macros are just used by a few files. Move them out of genhd.h,
which is included everywhere into a new standalone header.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Make {first,last}_error_{ino,block,line,func,errcode} available via
sysfs.
Also add a missing newline for {first,last}_error_time.
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Add most of fs-verity support to ext4. fs-verity is a filesystem
feature that enables transparent integrity protection and authentication
of read-only files. It uses a dm-verity like mechanism at the file
level: a Merkle tree is used to verify any block in the file in
log(filesize) time. It is implemented mainly by helper functions in
fs/verity/. See Documentation/filesystems/fsverity.rst for the full
documentation.
This commit adds all of ext4 fs-verity support except for the actual
data verification, including:
- Adding a filesystem feature flag and an inode flag for fs-verity.
- Implementing the fsverity_operations to support enabling verity on an
inode and reading/writing the verity metadata.
- Updating ->write_begin(), ->write_end(), and ->writepages() to support
writing verity metadata pages.
- Calling the fs-verity hooks for ->open(), ->setattr(), and ->ioctl().
ext4 stores the verity metadata (Merkle tree and fsverity_descriptor)
past the end of the file, starting at the first 64K boundary beyond
i_size. This approach works because (a) verity files are readonly, and
(b) pages fully beyond i_size aren't visible to userspace but can be
read/written internally by ext4 with only some relatively small changes
to ext4. This approach avoids having to depend on the EA_INODE feature
and on rearchitecturing ext4's xattr support to support paging
multi-gigabyte xattrs into memory, and to support encrypting xattrs.
Note that the verity metadata *must* be encrypted when the file is,
since it contains hashes of the plaintext data.
This patch incorporates work by Theodore Ts'o and Chandan Rajendra.
Reviewed-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Eric Biggers <ebiggers@google.com>
The kobj_type default_attrs field is being replaced by the
default_groups field. Replace the default_attrs field in ext4_sb_ktype
and ext4_feat_ktype with default_groups. Use the ATTRIBUTE_GROUPS macro
to create ext4_groups and ext4_feat_groups.
Signed-off-by: Kimberly Brown <kimbrownkd@gmail.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
users to more easily find the jbd2 journal thread for a particular
ext4 file system.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEK2m5VNv+CHkogTfJ8vlZVpUNgaMFAlx8utQACgkQ8vlZVpUN
gaOMOQf+Olp6hTbCuPJNill7npEejkPu9VhNvLPp3dLPBfsyqG9IOZmUaKKtr3LS
ZYYzMMoIlbHDsWM70O92zDS3s1ThKRFoDdcw4YKXkn1Awlqc4LRZ/NnzyIIdA3mK
rhOvcr6ttWk2B2S67nGceTH08SX5zACMtMiQijP58+GCp4Xe+PdqPRRjYYJSOZMv
xCS43LoWY0tkeBTQuk9WYTi6G/E1X/aiq06pYiQzP69PotN6/cFSdNgP1r+7dYiS
V4IXPqEqFt8NvUZb1bJchT3+2zM3Xi/+n//7yLkpY7OhX6p1p24oB7abMstp3ssU
BlF8KP4elQcI892QX2Hf+0r4tBu+0w==
=2yLu
-----END PGP SIGNATURE-----
Merge tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Pull ext4 updates from Ted Ts'o:
"A large number of bug fixes and cleanups.
One new feature to allow users to more easily find the jbd2 journal
thread for a particular ext4 file system"
* tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (25 commits)
jbd2: jbd2_get_transaction does not need to return a value
jbd2: fix invalid descriptor block checksum
ext4: fix bigalloc cluster freeing when hole punching under load
ext4: add sysfs attr /sys/fs/ext4/<disk>/journal_task
ext4: Change debugging support help prefix from EXT4 to Ext4
ext4: fix compile error when using BUFFER_TRACE
jbd2: fix compile warning when using JBUFFER_TRACE
ext4: fix some error pointer dereferences
ext4: annotate more implicit fall throughs
ext4: annotate implicit fall throughs
ext4: don't update s_rev_level if not required
jbd2: fold jbd2_superblock_csum_{verify,set} into their callers
jbd2: fix race when writing superblock
ext4: fix crash during online resizing
ext4: disallow files with EXT4_JOURNAL_DATA_FL from EXT4_IOC_SWAP_BOOT
ext4: add mask of ext4 flags to swap
ext4: update quota information while swapping boot loader inode
ext4: cleanup pagecache before swap i_data
ext4: fix check of inode in swap_inode_boot_loader
ext4: unlock unused_pages timely when doing writeback
...
This is useful for moving journal thread into cgroup or
for tracing it with ftrace/perf/blktrace.
For now the only way is `pgrep jbd2/$DISK` but this is not reliable:
name may be longer than "comm" limit and any task could mock it.
Attribute shows pid in current pid-namespace or 0 if task is unreachable.
Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
In order to have a common code base for fscrypt "post read" processing
for all filesystems which support encryption, this commit removes
filesystem specific build config option (e.g. CONFIG_EXT4_FS_ENCRYPTION)
and replaces it with a build option (i.e. CONFIG_FS_ENCRYPTION) whose
value affects all the filesystems making use of fscrypt.
Reviewed-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Chandan Rajendra <chandan@linux.vnet.ibm.com>
Signed-off-by: Eric Biggers <ebiggers@google.com>
-----BEGIN PGP SIGNATURE-----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=b9ib
-----END PGP SIGNATURE-----
Merge tag 'for-4.19/block-20180812' of git://git.kernel.dk/linux-block
Pull block updates from Jens Axboe:
"First pull request for this merge window, there will also be a
followup request with some stragglers.
This pull request contains:
- Fix for a thundering heard issue in the wbt block code (Anchal
Agarwal)
- A few NVMe pull requests:
* Improved tracepoints (Keith)
* Larger inline data support for RDMA (Steve Wise)
* RDMA setup/teardown fixes (Sagi)
* Effects log suppor for NVMe target (Chaitanya Kulkarni)
* Buffered IO suppor for NVMe target (Chaitanya Kulkarni)
* TP4004 (ANA) support (Christoph)
* Various NVMe fixes
- Block io-latency controller support. Much needed support for
properly containing block devices. (Josef)
- Series improving how we handle sense information on the stack
(Kees)
- Lightnvm fixes and updates/improvements (Mathias/Javier et al)
- Zoned device support for null_blk (Matias)
- AIX partition fixes (Mauricio Faria de Oliveira)
- DIF checksum code made generic (Max Gurtovoy)
- Add support for discard in iostats (Michael Callahan / Tejun)
- Set of updates for BFQ (Paolo)
- Removal of async write support for bsg (Christoph)
- Bio page dirtying and clone fixups (Christoph)
- Set of bcache fix/changes (via Coly)
- Series improving blk-mq queue setup/teardown speed (Ming)
- Series improving merging performance on blk-mq (Ming)
- Lots of other fixes and cleanups from a slew of folks"
* tag 'for-4.19/block-20180812' of git://git.kernel.dk/linux-block: (190 commits)
blkcg: Make blkg_root_lookup() work for queues in bypass mode
bcache: fix error setting writeback_rate through sysfs interface
null_blk: add lock drop/acquire annotation
Blk-throttle: reduce tail io latency when iops limit is enforced
block: paride: pd: mark expected switch fall-throughs
block: Ensure that a request queue is dissociated from the cgroup controller
block: Introduce blk_exit_queue()
blkcg: Introduce blkg_root_lookup()
block: Remove two superfluous #include directives
blk-mq: count the hctx as active before allocating tag
block: bvec_nr_vecs() returns value for wrong slab
bcache: trivial - remove tailing backslash in macro BTREE_FLAG
bcache: make the pr_err statement used for ENOENT only in sysfs_attatch section
bcache: set max writeback rate when I/O request is idle
bcache: add code comments for bset.c
bcache: fix mistaken comments in request.c
bcache: fix mistaken code comments in bcache.h
bcache: add a comment in super.c
bcache: avoid unncessary cache prefetch bch_btree_node_get()
bcache: display rate debug parameters to 0 when writeback is not running
...
The inode timestamps use 34 bits in ext4, but the various timestamps in
the superblock are limited to 32 bits. If every user accesses these as
'unsigned', then this is good until year 2106, but it seems better to
extend this a bit further in the process of removing the deprecated
get_seconds() function.
This adds another byte for each timestamp in the superblock, making
them long enough to store timestamps beyond what is in the inodes,
which seems good enough here (in ocfs2, they are already 64-bit wide,
which is appropriate for a new layout).
I did not modify e2fsprogs, which obviously needs the same change to
actually interpret future timestamps correctly.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
While working on extended rand for last_error/first_error timestamps,
I noticed that the endianess is wrong; we access the little-endian
fields in struct ext4_super_block as native-endian when we print them.
This adds a special case in ext4_attr_show() and ext4_attr_store()
to byteswap the superblock fields if needed.
In older kernels, this code was part of super.c, it got moved to
sysfs.c in linux-4.4.
Cc: stable@vger.kernel.org
Fixes: 52c198c682 ("ext4: add sysfs entry showing whether the fs contains errors")
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Add defines for STAT_READ and STAT_WRITE for indexing the partition
stat entries. This clarifies some fs/ code which has hardcoded 1 for
STAT_WRITE and will make it easier to extend the stats with additional
fields.
tj: Refreshed on top of v4.17.
Signed-off-by: Michael Callahan <michaelcallahan@fb.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Cc: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Use remove_proc_subtree to remove the whole subtree on cleanup, and
unwind the registration loop into individual calls. Switch to use
proc_create_seq where applicable.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Replace kset with generic kobject provided by kobject_create_and_add(),
since the latter is sufficient.
Signed-off-by: Tyson Nottingham <tgnottingham@gmail.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Make cleanup of ext4_feat kobject consistent with similar objects.
Signed-off-by: Tyson Nottingham <tgnottingham@gmail.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
ksets contain a kobject and they should always be allocated dynamically,
because it is unknown to whoever creates them when ksets can be
released.
Signed-off-by: Riccardo Schirone <sirmy15@gmail.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
kobjects should always be allocated dynamically, because it is unknown
to whoever creates them when kobjects can be released.
Signed-off-by: Riccardo Schirone <sirmy15@gmail.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Even when kobject_init_and_add/kset_register fail, the kobject has been
already initialized and the refcount set to 1. Thus it is necessary to
release the kobject/kset, to avoid the memory associated with it hanging
around forever.
Signed-off-by: Riccardo Schirone <sirmy15@gmail.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.
By default all files without license information are under the default
license of the kernel, which is GPL version 2.
Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.
This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.
How this work was done:
Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,
Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.
The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.
The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.
Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).
All documentation files were explicitly excluded.
The following heuristics were used to determine which SPDX license
identifiers to apply.
- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.
For non */uapi/* files that summary was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139
and resulted in the first patch in this series.
If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930
and resulted in the second patch in this series.
- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:
SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1
and that resulted in the third patch in this series.
- when the two scanners agreed on the detected license(s), that became
the concluded license(s).
- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.
- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).
- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.
- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.
In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.
Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.
Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.
In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.
Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct
This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.
These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
kstrtoull returns 0 on success, however, in reserved_clusters_store we
will return -EINVAL if kstrtoull returns 0, it makes us fail to update
reserved_clusters value through sysfs.
Fixes: 76d33bca55
Cc: stable@vger.kernel.org # 4.4
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Miao Xie <miaoxie@huawei.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Baokun Li