When we added mount_setattr() I added additional checks compared to the
legacy do_reconfigure_mnt() and do_change_type() helpers used by regular
mount(2). If that mount had a parent then verify that the caller and the
mount namespace the mount is attached to match and if not make sure that
it's an anonymous mount.
The real rootfs falls into neither category. It is neither an anoymous
mount because it is obviously attached to the initial mount namespace
but it also obviously doesn't have a parent mount. So that means legacy
mount(2) allows changing mount properties on the real rootfs but
mount_setattr(2) blocks this. I never thought much about this but of
course someone on this planet of earth changes properties on the real
rootfs as can be seen in [1].
Since util-linux finally switched to the new mount api in 2.39 not so
long ago it also relies on mount_setattr() and that surfaced this issue
when Fedora 39 finally switched to it. Fix this.
Link: https://bugzilla.redhat.com/show_bug.cgi?id=2256843
Link: https://lore.kernel.org/r/20240206-vfs-mount-rootfs-v1-1-19b335eee133@kernel.org
Reviewed-by: Jan Kara <jack@suse.cz>
Reported-by: Karel Zak <kzak@redhat.com>
Cc: stable@vger.kernel.org # v5.12+
Signed-off-by: Christian Brauner <brauner@kernel.org>
Linus pointed out that there's error handling and naming issues in the
that we should rewrite:
* Perform the access checks for the buffer before actually doing any
work instead of doing it during the iteration.
* Rename the arguments to listmount() and do_listmount() to clarify what
the arguments are used for.
* Get rid of the pointless ctr variable and overflow checking.
* Get rid of the pointless speculation check.
Link: https://lore.kernel.org/r/CAHk-=wjh6Cypo8WC-McXgSzCaou3UXccxB+7PVeSuGR8AjCphg@mail.gmail.com
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
To help make the move of sysctls out of kernel/sysctl.c not incur a size
penalty sysctl has been changed to allow us to not require the sentinel, the
final empty element on the sysctl array. Joel Granados has been doing all this
work. On the v6.6 kernel we got the major infrastructure changes required to
support this. For v6.7 we had all arch/ and drivers/ modified to remove
the sentinel. For v6.8-rc1 we get a few more updates for fs/ directory only.
The kernel/ directory is left but we'll save that for v6.9-rc1 as those patches
are still being reviewed. After that we then can expect also the removal of the
no longer needed check for procname == NULL.
Let us recap the purpose of this work:
- this helps reduce the overall build time size of the kernel and run time
memory consumed by the kernel by about ~64 bytes per array
- the extra 64-byte penalty is no longer inncurred now when we move sysctls
out from kernel/sysctl.c to their own files
Thomas Weißschuh also sent a few cleanups, for v6.9-rc1 we expect to see further
work by Thomas Weißschuh with the constificatin of the struct ctl_table.
Due to Joel Granados's work, and to help bring in new blood, I have suggested
for him to become a maintainer and he's accepted. So for v6.9-rc1 I look forward
to seeing him sent you a pull request for further sysctl changes. This also
removes Iurii Zaikin as a maintainer as he has moved on to other projects and
has had no time to help at all.
-----BEGIN PGP SIGNATURE-----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=2qBt
-----END PGP SIGNATURE-----
Merge tag 'sysctl-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux
Pull sysctl updates from Luis Chamberlain:
"To help make the move of sysctls out of kernel/sysctl.c not incur a
size penalty sysctl has been changed to allow us to not require the
sentinel, the final empty element on the sysctl array. Joel Granados
has been doing all this work.
In the v6.6 kernel we got the major infrastructure changes required to
support this. For v6.7 we had all arch/ and drivers/ modified to
remove the sentinel. For v6.8-rc1 we get a few more updates for fs/
directory only.
The kernel/ directory is left but we'll save that for v6.9-rc1 as
those patches are still being reviewed. After that we then can expect
also the removal of the no longer needed check for procname == NULL.
Let us recap the purpose of this work:
- this helps reduce the overall build time size of the kernel and run
time memory consumed by the kernel by about ~64 bytes per array
- the extra 64-byte penalty is no longer inncurred now when we move
sysctls out from kernel/sysctl.c to their own files
Thomas Weißschuh also sent a few cleanups, for v6.9-rc1 we expect to
see further work by Thomas Weißschuh with the constificatin of the
struct ctl_table.
Due to Joel Granados's work, and to help bring in new blood, I have
suggested for him to become a maintainer and he's accepted. So for
v6.9-rc1 I look forward to seeing him sent you a pull request for
further sysctl changes. This also removes Iurii Zaikin as a maintainer
as he has moved on to other projects and has had no time to help at
all"
* tag 'sysctl-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux:
sysctl: remove struct ctl_path
sysctl: delete unused define SYSCTL_PERM_EMPTY_DIR
coda: Remove the now superfluous sentinel elements from ctl_table array
sysctl: Remove the now superfluous sentinel elements from ctl_table array
fs: Remove the now superfluous sentinel elements from ctl_table array
cachefiles: Remove the now superfluous sentinel element from ctl_table array
sysclt: Clarify the results of selftest run
sysctl: Add a selftest for handling empty dirs
sysctl: Fix out of bounds access for empty sysctl registers
MAINTAINERS: Add Joel Granados as co-maintainer for proc sysctl
MAINTAINERS: remove Iurii Zaikin from proc sysctl
-----BEGIN PGP SIGNATURE-----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=4sw3
-----END PGP SIGNATURE-----
Merge tag 'for-6.8-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs updates from David Sterba:
"There are no exciting changes for users, it's been mostly API
conversions and some fixes or refactoring.
The mount API conversion is a base for future improvements that would
come with VFS. Metadata processing has been converted to folios, not
yet enabling the large folios but it's one patch away once everything
gets tested enough.
Core changes:
- convert extent buffers to folios:
- direct API conversion where possible
- performance can drop by a few percent on metadata heavy
workloads, the folio sizes are not constant and the calculations
add up in the item helpers
- both regular and subpage modes
- data cannot be converted yet, we need to port that to iomap and
there are some other generic changes required
- convert mount to the new API, should not be user visible:
- options deprecated long time ago have been removed: inode_cache,
recovery
- the new logic that splits mount to two phases slightly changes
timing of device scanning for multi-device filesystems
- LSM options will now work (like for selinux)
- convert delayed nodes radix tree to xarray, preserving the
preload-like logic that still allows to allocate with GFP_NOFS
- more validation of sysfs value of scrub_speed_max
- refactor chunk map structure, reduce size and improve performance
- extent map refactoring, smaller data structures, improved
performance
- reduce size of struct extent_io_tree, embedded in several
structures
- temporary pages used for compression are cached and attached to a
shrinker, this may slightly improve performance
- in zoned mode, remove redirty extent buffer tracking, zeros are
written in case an out-of-order is detected and proper data are
written to the actual write pointer
- cleanups, refactoring, error message improvements, updated tests
- verify and update branch name or tag
- remove unwanted text"
* tag 'for-6.8-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: (89 commits)
btrfs: pass btrfs_io_geometry into btrfs_max_io_len
btrfs: pass struct btrfs_io_geometry to set_io_stripe
btrfs: open code set_io_stripe for RAID56
btrfs: change block mapping to switch/case in btrfs_map_block
btrfs: factor out block mapping for single profiles
btrfs: factor out block mapping for RAID5/6
btrfs: reduce scope of data_stripes in btrfs_map_block
btrfs: factor out block mapping for RAID10
btrfs: factor out block mapping for DUP profiles
btrfs: factor out RAID1 block mapping
btrfs: factor out block-mapping for RAID0
btrfs: re-introduce struct btrfs_io_geometry
btrfs: factor out helper for single device IO check
btrfs: migrate btrfs_repair_io_failure() to folio interfaces
btrfs: migrate eb_bitmap_offset() to folio interfaces
btrfs: migrate various end io functions to folios
btrfs: migrate subpage code to folio interfaces
btrfs: migrate get_eb_page_index() and get_eb_offset_in_page() to folios
btrfs: don't double put our subpage reference in alloc_extent_buffer
btrfs: cleanup metadata page pointer usage
...
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCZZU0CgAKCRCRxhvAZXjc
osncAQDSJK0frJL+72NqXxa4YNzivrnuw6fhp5iaDAEqxdm8ygEAoJWyh7Rmkt8G
drAXWGyGnCYqv7UgC6axLyciid7TxQg=
=vJuv
-----END PGP SIGNATURE-----
Merge tag 'vfs-6.8.mount' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs mount updates from Christian Brauner:
"This contains the work to retrieve detailed information about mounts
via two new system calls. This is hopefully the beginning of the end
of the saga that started with fsinfo() years ago.
The LWN articles in [1] and [2] can serve as a summary so we can avoid
rehashing everything here.
At LSFMM in May 2022 we got into a room and agreed on what we want to
do about fsinfo(). Basically, split it into pieces. This is the first
part of that agreement. Specifically, it is concerned with retrieving
information about mounts. So this only concerns the mount information
retrieval, not the mount table change notification, or the extended
filesystem specific mount option work. That is separate work.
Currently mounts have a 32bit id. Mount ids are already in heavy use
by libmount and other low-level userspace but they can't be relied
upon because they're recycled very quickly. We agreed that mounts
should carry a unique 64bit id by which they can be referenced
directly. This is now implemented as part of this work.
The new 64bit mount id is exposed in statx() through the new
STATX_MNT_ID_UNIQUE flag. If the flag isn't raised the old mount id is
returned. If it is raised and the kernel supports the new 64bit mount
id the flag is raised in the result mask and the new 64bit mount id is
returned. New and old mount ids do not overlap so they cannot be
conflated.
Two new system calls are introduced that operate on the 64bit mount
id: statmount() and listmount(). A summary of the api and usage can be
found on LWN as well (cf. [3]) but of course, I'll provide a summary
here as well.
Both system calls rely on struct mnt_id_req. Which is the request
struct used to pass the 64bit mount id identifying the mount to
operate on. It is extensible to allow for the addition of new
parameters and for future use in other apis that make use of mount
ids.
statmount() mimicks the semantics of statx() and exposes a set flags
that userspace may raise in mnt_id_req to request specific information
to be retrieved. A statmount() call returns a struct statmount filled
in with information about the requested mount. Supported requests are
indicated by raising the request flag passed in struct mnt_id_req in
the @mask argument in struct statmount.
Currently we do support:
- STATMOUNT_SB_BASIC:
Basic filesystem info
- STATMOUNT_MNT_BASIC
Mount information (mount id, parent mount id, mount attributes etc)
- STATMOUNT_PROPAGATE_FROM
Propagation from what mount in current namespace
- STATMOUNT_MNT_ROOT
Path of the root of the mount (e.g., mount --bind /bla /mnt returns /bla)
- STATMOUNT_MNT_POINT
Path of the mount point (e.g., mount --bind /bla /mnt returns /mnt)
- STATMOUNT_FS_TYPE
Name of the filesystem type as the magic number isn't enough due to submounts
The string options STATMOUNT_MNT_{ROOT,POINT} and STATMOUNT_FS_TYPE
are appended to the end of the struct. Userspace can use the offsets
in @fs_type, @mnt_root, and @mnt_point to reference those strings
easily.
The struct statmount reserves quite a bit of space currently for
future extensibility. This isn't really a problem and if this bothers
us we can just send a follow-up pull request during this cycle.
listmount() is given a 64bit mount id via mnt_id_req just as
statmount(). It takes a buffer and a size to return an array of the
64bit ids of the child mounts of the requested mount. Userspace can
thus choose to either retrieve child mounts for a mount in batches or
iterate through the child mounts. For most use-cases it will be
sufficient to just leave space for a few child mounts. But for big
mount tables having an iterator is really helpful. Iterating through a
mount table works by setting @param in mnt_id_req to the mount id of
the last child mount retrieved in the previous listmount() call"
Link: https://lwn.net/Articles/934469 [1]
Link: https://lwn.net/Articles/829212 [2]
Link: https://lwn.net/Articles/950569 [3]
* tag 'vfs-6.8.mount' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
add selftest for statmount/listmount
fs: keep struct mnt_id_req extensible
wire up syscalls for statmount/listmount
add listmount(2) syscall
statmount: simplify string option retrieval
statmount: simplify numeric option retrieval
add statmount(2) syscall
namespace: extract show_path() helper
mounts: keep list of mounts in an rbtree
add unique mount ID
This commit comes at the tail end of a greater effort to remove the
empty elements at the end of the ctl_table arrays (sentinels) which
will reduce the overall build time size of the kernel and run time
memory bloat by ~64 bytes per sentinel (further information Link :
https://lore.kernel.org/all/ZO5Yx5JFogGi%2FcBo@bombadil.infradead.org/)
Remove sentinel elements ctl_table struct. Special attention was placed in
making sure that an empty directory for fs/verity was created when
CONFIG_FS_VERITY_BUILTIN_SIGNATURES is not defined. In this case we use the
register sysctl call that expects a size.
Signed-off-by: Joel Granados <j.granados@samsung.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Acked-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
We already communicate to filesystems when a remount request comes from
the old mount API as some filesystems choose to implement different
behavior in the new mount API than the old mount API to e.g., take the
chance to fix significant API bugs. Allow the same for regular mount
requests.
Fixes: b330966f79 ("fuse: reject options on reconfigure via fsconfig(2)")
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Make it extensible so that we have the liberty to reuse it in future
mount-id based apis. Treat zero size as the first published struct.
Signed-off-by: Christian Brauner <brauner@kernel.org>
Add way to query the children of a particular mount. This is a more
flexible way to iterate the mount tree than having to parse
/proc/self/mountinfo.
Lookup the mount by the new 64bit mount ID. If a mount needs to be
queried based on path, then statx(2) can be used to first query the
mount ID belonging to the path.
Return an array of new (64bit) mount ID's. Without privileges only
mounts are listed which are reachable from the task's root.
Folded into this patch are several later improvements. Keeping them
separate would make the history pointlessly confusing:
* Recursive listing of mounts is the default now (cf. [1]).
* Remove explicit LISTMOUNT_UNREACHABLE flag (cf. [1]) and fail if mount
is unreachable from current root. This also makes permission checking
consistent with statmount() (cf. [3]).
* Start listing mounts in unique mount ID order (cf. [2]) to allow
continuing listmount() from a midpoint.
* Allow to continue listmount(). The @request_mask parameter is renamed
and to @param to be usable by both statmount() and listmount().
If @param is set to a mount id then listmount() will continue listing
mounts from that id on. This allows listing mounts in multiple
listmount invocations without having to resize the buffer. If @param
is zero then the listing starts from the beginning (cf. [4]).
* Don't return EOVERFLOW, instead return the buffer size which allows to
detect a full buffer as well (cf. [4]).
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Link: https://lore.kernel.org/r/20231025140205.3586473-6-mszeredi@redhat.com
Reviewed-by: Ian Kent <raven@themaw.net>
Link: https://lore.kernel.org/r/20231128160337.29094-2-mszeredi@redhat.com [1] (folded)
Link: https://lore.kernel.org/r/20231128160337.29094-3-mszeredi@redhat.com [2] (folded)
Link: https://lore.kernel.org/r/20231128160337.29094-4-mszeredi@redhat.com [3] (folded)
Link: https://lore.kernel.org/r/20231128160337.29094-5-mszeredi@redhat.com [4] (folded)
[Christian Brauner <brauner@kernel.org>: various smaller fixes]
Signed-off-by: Christian Brauner <brauner@kernel.org>
The previous code was a bit too clever for what we currently support.
A few minor changes:
* Avoid indirect function calls and use a simple switch statement. We
really only have three cases to handle so it's not like it's massively
complex. We can switch to something more elaborate should we introduce
more complex options.
* Defer all copy_to_user() calls until after we've given up namespace
semaphore.
On kernels with userfaultfd it's possible to abuse copy_from/to_user()
calls to indefinitely block on page faults. That's usually a
privileged operation but may be made available to unprivileged users.
Independent of userfaultfd it's better to not do all the
copy_to_user() work while holding namespace semaphore. Instead collect
the information and then copy it out after we've given up all locks.
* This also folds a change from Arnd to reduce the stack size in
prepare_kstatmount() to avoid warning such as:
fs/namespace.c:4995:1: error: stack frame size (1536) exceeds limit (1024) in '__se_sys_statmount' [-Werror,-Wframe-larger-than]
4995 | SYSCALL_DEFINE4(statmount, const struct mnt_id_req __user *, req,
Reviewed-by: Ian Kent <raven@themaw.net>
Link: https://lore.kernel.org/r/20231213090015.518044-1-arnd@kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
Don't use all of this indirection which makes it really hard to follow
the code which is very basic. Error handling is also not really neede
here at all.
Signed-off-by: Christian Brauner <brauner@kernel.org>
Add a way to query attributes of a single mount instead of having to parse
the complete /proc/$PID/mountinfo, which might be huge.
Lookup the mount the new 64bit mount ID. If a mount needs to be queried
based on path, then statx(2) can be used to first query the mount ID
belonging to the path.
Design is based on a suggestion by Linus:
"So I'd suggest something that is very much like "statfsat()", which gets
a buffer and a length, and returns an extended "struct statfs" *AND*
just a string description at the end."
The interface closely mimics that of statx.
Handle ASCII attributes by appending after the end of the structure (as per
above suggestion). Pointers to strings are stored in u64 members to make
the structure the same regardless of pointer size. Strings are nul
terminated.
Link: https://lore.kernel.org/all/CAHk-=wh5YifP7hzKSbwJj94+DZ2czjrZsczy6GBimiogZws=rg@mail.gmail.com/
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Link: https://lore.kernel.org/r/20231025140205.3586473-5-mszeredi@redhat.com
Reviewed-by: Ian Kent <raven@themaw.net>
[Christian Brauner <brauner@kernel.org>: various minor changes]
Signed-off-by: Christian Brauner <brauner@kernel.org>
Fix the W=1 build warning:
../fs/namespace.c:3050: warning: Function parameter or member 'mp' not described in 'can_move_mount_beneath'
Signed-off-by: Christian Brauner <brauner@kernel.org>
When adding a mount to a namespace insert it into an rbtree rooted in the
mnt_namespace instead of a linear list.
The mnt.mnt_list is still used to set up the mount tree and for
propagation, but not after the mount has been added to a namespace. Hence
mnt_list can live in union with rb_node. Use MNT_ONRB mount flag to
validate that the mount is on the correct list.
This allows removing the cursor used for reading /proc/$PID/mountinfo. The
mnt_id_unique of the next mount can be used as an index into the seq file.
Tested by inserting 100k bind mounts, unsharing the mount namespace, and
unmounting. No performance regressions have been observed.
For the last mount in the 100k list the statmount() call was more than 100x
faster due to the mount ID lookup not having to do a linear search. This
patch makes the overhead of mount ID lookup non-observable in this range.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Link: https://lore.kernel.org/r/20231025140205.3586473-3-mszeredi@redhat.com
Reviewed-by: Ian Kent <raven@themaw.net>
Signed-off-by: Christian Brauner <brauner@kernel.org>
If a mount is released then its mnt_id can immediately be reused. This is
bad news for user interfaces that want to uniquely identify a mount.
Implementing a unique mount ID is trivial (use a 64bit counter).
Unfortunately userspace assumes 32bit size and would overflow after the
counter reaches 2^32.
Introduce a new 64bit ID alongside the old one. Initialize the counter to
2^32, this guarantees that the old and new IDs are never mixed up.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Link: https://lore.kernel.org/r/20231025140205.3586473-2-mszeredi@redhat.com
Reviewed-by: Ian Kent <raven@themaw.net>
Signed-off-by: Christian Brauner <brauner@kernel.org>
there's little I can say which isn't in the individual changelogs.
The lengthier patch series are
- "kdump: use generic functions to simplify crashkernel reservation in
arch", from Baoquan He. This is mainly cleanups and consolidation of
the "crashkernel=" kernel parameter handling.
- After much discussion, David Laight's "minmax: Relax type checks in
min() and max()" is here. Hopefully reduces some typecasting and the
use of min_t() and max_t().
- A group of patches from Oleg Nesterov which clean up and slightly fix
our handling of reads from /proc/PID/task/... and which remove
task_struct.therad_group.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZUQP9wAKCRDdBJ7gKXxA
jmOAAQDh8sxagQYocoVsSm28ICqXFeaY9Co1jzBIDdNesAvYVwD/c2DHRqJHEiS4
63BNcG3+hM9nwGJHb5lyh5m79nBMRg0=
=On4u
-----END PGP SIGNATURE-----
Merge tag 'mm-nonmm-stable-2023-11-02-14-08' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull non-MM updates from Andrew Morton:
"As usual, lots of singleton and doubleton patches all over the tree
and there's little I can say which isn't in the individual changelogs.
The lengthier patch series are
- 'kdump: use generic functions to simplify crashkernel reservation
in arch', from Baoquan He. This is mainly cleanups and
consolidation of the 'crashkernel=' kernel parameter handling
- After much discussion, David Laight's 'minmax: Relax type checks in
min() and max()' is here. Hopefully reduces some typecasting and
the use of min_t() and max_t()
- A group of patches from Oleg Nesterov which clean up and slightly
fix our handling of reads from /proc/PID/task/... and which remove
task_struct.thread_group"
* tag 'mm-nonmm-stable-2023-11-02-14-08' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (64 commits)
scripts/gdb/vmalloc: disable on no-MMU
scripts/gdb: fix usage of MOD_TEXT not defined when CONFIG_MODULES=n
.mailmap: add address mapping for Tomeu Vizoso
mailmap: update email address for Claudiu Beznea
tools/testing/selftests/mm/run_vmtests.sh: lower the ptrace permissions
.mailmap: map Benjamin Poirier's address
scripts/gdb: add lx_current support for riscv
ocfs2: fix a spelling typo in comment
proc: test ProtectionKey in proc-empty-vm test
proc: fix proc-empty-vm test with vsyscall
fs/proc/base.c: remove unneeded semicolon
do_io_accounting: use sig->stats_lock
do_io_accounting: use __for_each_thread()
ocfs2: replace BUG_ON() at ocfs2_num_free_extents() with ocfs2_error()
ocfs2: fix a typo in a comment
scripts/show_delta: add __main__ judgement before main code
treewide: mark stuff as __ro_after_init
fs: ocfs2: check status values
proc: test /proc/${pid}/statm
compiler.h: move __is_constexpr() to compiler.h
...
So happens it already was not doing it, but there is no need to "hope"
as indicated in the comment.
No changes in generated assembly.
Signed-off-by: Mateusz Guzik <mjguzik@gmail.com>
Link: https://lore.kernel.org/r/20231004111916.728135-3-mjguzik@gmail.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
__read_mostly predates __ro_after_init. Many variables which are marked
__read_mostly should have been __ro_after_init from day 1.
Also, mark some stuff as "const" and "__init" while I'm at it.
[akpm@linux-foundation.org: revert sysctl_nr_open_min, sysctl_nr_open_max changes due to arm warning]
[akpm@linux-foundation.org: coding-style cleanups]
Link: https://lkml.kernel.org/r/4f6bb9c0-abba-4ee4-a7aa-89265e886817@p183
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Overlayfs is going to use those to get write access on the upper mount
during entire copy up without taking freeze protection on upper sb for
the entire copy up.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Message-Id: <20230908132900.2983519-3-amir73il@gmail.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Before exporting these helpers to modules, make their names more
meaningful.
The names mnt_{get,put)_write_access*() were chosen, because they rhyme
with the inode {get,put)_write_access() helpers, which have a very close
meaning for the inode object.
Suggested-by: Christian Brauner <brauner@kernel.org>
Link: https://lore.kernel.org/r/20230817-anfechtbar-ruhelosigkeit-8c6cca8443fc@brauner/
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Message-Id: <20230908132900.2983519-2-amir73il@gmail.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCZJU3/AAKCRCRxhvAZXjc
ov1bAQDT+i3l8jS+r1HGVBuZHz2bPPkrk3ch+xGU9V/iBhrGtAD7BaogZ5OaeJP0
A1CQecON51Tq79Nw+EgEBLcRJ/xhXAQ=
=v3md
-----END PGP SIGNATURE-----
Merge tag 'v6.5/vfs.mount' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs mount updates from Christian Brauner:
"This contains the work to extend move_mount() to allow adding a mount
beneath the topmost mount of a mount stack.
There are two LWN articles about this. One covers the original patch
series in [1]. The other in [2] summarizes the session and roughly the
discussion between Al and me at LSFMM. The second article also goes
into some good questions from attendees.
Since all details are found in the relevant commit with a technical
dive into semantics and locking at the end I'm only adding the
motivation and core functionality for this from commit message and
leave out the invasive details. The code is also heavily commented and
annotated as well which was explicitly requested.
TL;DR:
> mount -t ext4 /dev/sda /mnt
|
└─/mnt /dev/sda ext4
> mount --beneath -t xfs /dev/sdb /mnt
|
└─/mnt /dev/sdb xfs
└─/mnt /dev/sda ext4
> umount /mnt
|
└─/mnt /dev/sdb xfs
The longer motivation is that various distributions are adding or are
in the process of adding support for system extensions and in the
future configuration extensions through various tools. A more detailed
explanation on system and configuration extensions can be found on the
manpage which is listed below at [3].
System extension images may – dynamically at runtime — extend the
/usr/ and /opt/ directory hierarchies with additional files. This is
particularly useful on immutable system images where a /usr/ and/or
/opt/ hierarchy residing on a read-only file system shall be extended
temporarily at runtime without making any persistent modifications.
When one or more system extension images are activated, their /usr/
and /opt/ hierarchies are combined via overlayfs with the same
hierarchies of the host OS, and the host /usr/ and /opt/ overmounted
with it ("merging"). When they are deactivated, the mount point is
disassembled — again revealing the unmodified original host version of
the hierarchy ("unmerging"). Merging thus makes the extension's
resources suddenly appear below the /usr/ and /opt/ hierarchies as if
they were included in the base OS image itself. Unmerging makes them
disappear again, leaving in place only the files that were shipped
with the base OS image itself.
System configuration images are similar but operate on directories
containing system or service configuration.
On nearly all modern distributions mount propagation plays a crucial
role and the rootfs of the OS is a shared mount in a peer group
(usually with peer group id 1):
TARGET SOURCE FSTYPE PROPAGATION MNT_ID PARENT_ID
/ / ext4 shared:1 29 1
On such systems all services and containers run in a separate mount
namespace and are pivot_root()ed into their rootfs. A separate mount
namespace is almost always used as it is the minimal isolation
mechanism services have. But usually they are even much more isolated
up to the point where they almost become indistinguishable from
containers.
Mount propagation again plays a crucial role here. The rootfs of all
these services is a slave mount to the peer group of the host rootfs.
This is done so the service will receive mount propagation events from
the host when certain files or directories are updated.
In addition, the rootfs of each service, container, and sandbox is
also a shared mount in its separate peer group:
TARGET SOURCE FSTYPE PROPAGATION MNT_ID PARENT_ID
/ / ext4 shared:24 master:1 71 47
For people not too familiar with mount propagation, the master:1 means
that this is a slave mount to peer group 1. Which as one can see is
the host rootfs as indicated by shared:1 above. The shared:24
indicates that the service rootfs is a shared mount in a separate peer
group with peer group id 24.
A service may run other services. Such nested services will also have
a rootfs mount that is a slave to the peer group of the outer service
rootfs mount.
For containers things are just slighly different. A container's rootfs
isn't a slave to the service's or host rootfs' peer group. The rootfs
mount of a container is simply a shared mount in its own peer group:
TARGET SOURCE FSTYPE PROPAGATION MNT_ID PARENT_ID
/home/ubuntu/debian-tree / ext4 shared:99 61 60
So whereas services are isolated OS components a container is treated
like a separate world and mount propagation into it is restricted to a
single well known mount that is a slave to the peer group of the
shared mount /run on the host:
TARGET SOURCE FSTYPE PROPAGATION MNT_ID PARENT_ID
/propagate/debian-tree /run/host/incoming tmpfs master:5 71 68
Here, the master:5 indicates that this mount is a slave to the peer
group with peer group id 5. This allows to propagate mounts into the
container and served as a workaround for not being able to insert
mounts into mount namespaces directly. But the new mount api does
support inserting mounts directly. For the interested reader the
blogpost in [4] might be worth reading where I explain the old and the
new approach to inserting mounts into mount namespaces.
Containers of course, can themselves be run as services. They often
run full systems themselves which means they again run services and
containers with the exact same propagation settings explained above.
The whole system is designed so that it can be easily updated,
including all services in various fine-grained ways without having to
enter every single service's mount namespace which would be
prohibitively expensive. The mount propagation layout has been
carefully chosen so it is possible to propagate updates for system
extensions and configurations from the host into all services.
The simplest model to update the whole system is to mount on top of
/usr, /opt, or /etc on the host. The new mount on /usr, /opt, or /etc
will then propagate into every service. This works cleanly the first
time. However, when the system is updated multiple times it becomes
necessary to unmount the first update on /opt, /usr, /etc and then
propagate the new update. But this means, there's an interval where
the old base system is accessible. This has to be avoided to protect
against downgrade attacks.
The vfs already exposes a mechanism to userspace whereby mounts can be
mounted beneath an existing mount. Such mounts are internally referred
to as "tucked". The patch series exposes the ability to mount beneath
a top mount through the new MOVE_MOUNT_BENEATH flag for the
move_mount() system call. This allows userspace to seamlessly upgrade
mounts. After this series the only thing that will have changed is
that mounting beneath an existing mount can be done explicitly instead
of just implicitly.
The crux is that the proposed mechanism already exists and that it is
so powerful as to cover cases where mounts are supposed to be updated
with new versions. Crucially, it offers an important flexibility.
Namely that updates to a system may either be forced or can be delayed
and the umount of the top mount be left to a service if it is a
cooperative one"
Link: https://lwn.net/Articles/927491 [1]
Link: https://lwn.net/Articles/934094 [2]
Link: https://man7.org/linux/man-pages/man8/systemd-sysext.8.html [3]
Link: https://brauner.io/2023/02/28/mounting-into-mount-namespaces.html [4]
Link: https://github.com/flatcar/sysext-bakery
Link: https://fedoraproject.org/wiki/Changes/Unified_Kernel_Support_Phase_1
Link: https://fedoraproject.org/wiki/Changes/Unified_Kernel_Support_Phase_2
Link: https://github.com/systemd/systemd/pull/26013
* tag 'v6.5/vfs.mount' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
fs: allow to mount beneath top mount
fs: use a for loop when locking a mount
fs: properly document __lookup_mnt()
fs: add path_mounted()
Provide helpers to set and clear sb->s_readonly_remount including
appropriate memory barriers. Also use this opportunity to document what
the barriers pair with and why they are needed.
Suggested-by: Dave Chinner <david@fromorbit.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Message-Id: <20230620112832.5158-1-jack@suse.cz>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Various distributions are adding or are in the process of adding support
for system extensions and in the future configuration extensions through
various tools. A more detailed explanation on system and configuration
extensions can be found on the manpage which is listed below at [1].
System extension images may – dynamically at runtime — extend the /usr/
and /opt/ directory hierarchies with additional files. This is
particularly useful on immutable system images where a /usr/ and/or
/opt/ hierarchy residing on a read-only file system shall be extended
temporarily at runtime without making any persistent modifications.
When one or more system extension images are activated, their /usr/ and
/opt/ hierarchies are combined via overlayfs with the same hierarchies
of the host OS, and the host /usr/ and /opt/ overmounted with it
("merging"). When they are deactivated, the mount point is disassembled
— again revealing the unmodified original host version of the hierarchy
("unmerging"). Merging thus makes the extension's resources suddenly
appear below the /usr/ and /opt/ hierarchies as if they were included in
the base OS image itself. Unmerging makes them disappear again, leaving
in place only the files that were shipped with the base OS image itself.
System configuration images are similar but operate on directories
containing system or service configuration.
On nearly all modern distributions mount propagation plays a crucial
role and the rootfs of the OS is a shared mount in a peer group (usually
with peer group id 1):
TARGET SOURCE FSTYPE PROPAGATION MNT_ID PARENT_ID
/ / ext4 shared:1 29 1
On such systems all services and containers run in a separate mount
namespace and are pivot_root()ed into their rootfs. A separate mount
namespace is almost always used as it is the minimal isolation mechanism
services have. But usually they are even much more isolated up to the
point where they almost become indistinguishable from containers.
Mount propagation again plays a crucial role here. The rootfs of all
these services is a slave mount to the peer group of the host rootfs.
This is done so the service will receive mount propagation events from
the host when certain files or directories are updated.
In addition, the rootfs of each service, container, and sandbox is also
a shared mount in its separate peer group:
TARGET SOURCE FSTYPE PROPAGATION MNT_ID PARENT_ID
/ / ext4 shared:24 master:1 71 47
For people not too familiar with mount propagation, the master:1 means
that this is a slave mount to peer group 1. Which as one can see is the
host rootfs as indicated by shared:1 above. The shared:24 indicates that
the service rootfs is a shared mount in a separate peer group with peer
group id 24.
A service may run other services. Such nested services will also have a
rootfs mount that is a slave to the peer group of the outer service
rootfs mount.
For containers things are just slighly different. A container's rootfs
isn't a slave to the service's or host rootfs' peer group. The rootfs
mount of a container is simply a shared mount in its own peer group:
TARGET SOURCE FSTYPE PROPAGATION MNT_ID PARENT_ID
/home/ubuntu/debian-tree / ext4 shared:99 61 60
So whereas services are isolated OS components a container is treated
like a separate world and mount propagation into it is restricted to a
single well known mount that is a slave to the peer group of the shared
mount /run on the host:
TARGET SOURCE FSTYPE PROPAGATION MNT_ID PARENT_ID
/propagate/debian-tree /run/host/incoming tmpfs master:5 71 68
Here, the master:5 indicates that this mount is a slave to the peer
group with peer group id 5. This allows to propagate mounts into the
container and served as a workaround for not being able to insert mounts
into mount namespaces directly. But the new mount api does support
inserting mounts directly. For the interested reader the blogpost in [2]
might be worth reading where I explain the old and the new approach to
inserting mounts into mount namespaces.
Containers of course, can themselves be run as services. They often run
full systems themselves which means they again run services and
containers with the exact same propagation settings explained above.
The whole system is designed so that it can be easily updated, including
all services in various fine-grained ways without having to enter every
single service's mount namespace which would be prohibitively expensive.
The mount propagation layout has been carefully chosen so it is possible
to propagate updates for system extensions and configurations from the
host into all services.
The simplest model to update the whole system is to mount on top of
/usr, /opt, or /etc on the host. The new mount on /usr, /opt, or /etc
will then propagate into every service. This works cleanly the first
time. However, when the system is updated multiple times it becomes
necessary to unmount the first update on /opt, /usr, /etc and then
propagate the new update. But this means, there's an interval where the
old base system is accessible. This has to be avoided to protect against
downgrade attacks.
The vfs already exposes a mechanism to userspace whereby mounts can be
mounted beneath an existing mount. Such mounts are internally referred
to as "tucked". The patch series exposes the ability to mount beneath a
top mount through the new MOVE_MOUNT_BENEATH flag for the move_mount()
system call. This allows userspace to seamlessly upgrade mounts. After
this series the only thing that will have changed is that mounting
beneath an existing mount can be done explicitly instead of just
implicitly.
Today, there are two scenarios where a mount can be mounted beneath an
existing mount instead of on top of it:
(1) When a service or container is started in a new mount namespace and
pivot_root()s into its new rootfs. The way this is done is by
mounting the new rootfs beneath the old rootfs:
fd_newroot = open("/var/lib/machines/fedora", ...);
fd_oldroot = open("/", ...);
fchdir(fd_newroot);
pivot_root(".", ".");
After the pivot_root(".", ".") call the new rootfs is mounted
beneath the old rootfs which can then be unmounted to reveal the
underlying mount:
fchdir(fd_oldroot);
umount2(".", MNT_DETACH);
Since pivot_root() moves the caller into a new rootfs no mounts must
be propagated out of the new rootfs as a consequence of the
pivot_root() call. Thus, the mounts cannot be shared.
(2) When a mount is propagated to a mount that already has another mount
mounted on the same dentry.
The easiest example for this is to create a new mount namespace. The
following commands will create a mount namespace where the rootfs
mount / will be a slave to the peer group of the host rootfs /
mount's peer group. IOW, it will receive propagation from the host:
mount --make-shared /
unshare --mount --propagation=slave
Now a new mount on the /mnt dentry in that mount namespace is
created. (As it can be confusing it should be spelled out that the
tmpfs mount on the /mnt dentry that was just created doesn't
propagate back to the host because the rootfs mount / of the mount
namespace isn't a peer of the host rootfs.):
mount -t tmpfs tmpfs /mnt
TARGET SOURCE FSTYPE PROPAGATION
└─/mnt tmpfs tmpfs
Now another terminal in the host mount namespace can observe that
the mount indeed hasn't propagated back to into the host mount
namespace. A new mount can now be created on top of the /mnt dentry
with the rootfs mount / as its parent:
mount --bind /opt /mnt
TARGET SOURCE FSTYPE PROPAGATION
└─/mnt /dev/sda2[/opt] ext4 shared:1
The mount namespace that was created earlier can now observe that
the bind mount created on the host has propagated into it:
TARGET SOURCE FSTYPE PROPAGATION
└─/mnt /dev/sda2[/opt] ext4 master:1
└─/mnt tmpfs tmpfs
But instead of having been mounted on top of the tmpfs mount at the
/mnt dentry the /opt mount has been mounted on top of the rootfs
mount at the /mnt dentry. And the tmpfs mount has been remounted on
top of the propagated /opt mount at the /opt dentry. So in other
words, the propagated mount has been mounted beneath the preexisting
mount in that mount namespace.
Mount namespaces make this easy to illustrate but it's also easy to
mount beneath an existing mount in the same mount namespace
(The following example assumes a shared rootfs mount / with peer
group id 1):
mount --bind /opt /opt
TARGET SOURCE FSTYPE MNT_ID PARENT_ID PROPAGATION
└─/opt /dev/sda2[/opt] ext4 188 29 shared:1
If another mount is mounted on top of the /opt mount at the /opt
dentry:
mount --bind /tmp /opt
The following clunky mount tree will result:
TARGET SOURCE FSTYPE MNT_ID PARENT_ID PROPAGATION
└─/opt /dev/sda2[/tmp] ext4 405 29 shared:1
└─/opt /dev/sda2[/opt] ext4 188 405 shared:1
└─/opt /dev/sda2[/tmp] ext4 404 188 shared:1
The /tmp mount is mounted beneath the /opt mount and another copy is
mounted on top of the /opt mount. This happens because the rootfs /
and the /opt mount are shared mounts in the same peer group.
When the new /tmp mount is supposed to be mounted at the /opt dentry
then the /tmp mount first propagates to the root mount at the /opt
dentry. But there already is the /opt mount mounted at the /opt
dentry. So the old /opt mount at the /opt dentry will be mounted on
top of the new /tmp mount at the /tmp dentry, i.e. @opt->mnt_parent
is @tmp and @opt->mnt_mountpoint is /tmp (Note that @opt->mnt_root
is /opt which is what shows up as /opt under SOURCE). So again, a
mount will be mounted beneath a preexisting mount.
(Fwiw, a few iterations of mount --bind /opt /opt in a loop on a
shared rootfs is a good example of what could be referred to as
mount explosion.)
The main point is that such mounts allows userspace to umount a top
mount and reveal an underlying mount. So for example, umounting the
tmpfs mount on /mnt that was created in example (1) using mount
namespaces reveals the /opt mount which was mounted beneath it.
In (2) where a mount was mounted beneath the top mount in the same mount
namespace unmounting the top mount would unmount both the top mount and
the mount beneath. In the process the original mount would be remounted
on top of the rootfs mount / at the /opt dentry again.
This again, is a result of mount propagation only this time it's umount
propagation. However, this can be avoided by simply making the parent
mount / of the @opt mount a private or slave mount. Then the top mount
and the original mount can be unmounted to reveal the mount beneath.
These two examples are fairly arcane and are merely added to make it
clear how mount propagation has effects on current and future features.
More common use-cases will just be things like:
mount -t btrfs /dev/sdA /mnt
mount -t xfs /dev/sdB --beneath /mnt
umount /mnt
after which we'll have updated from a btrfs filesystem to a xfs
filesystem without ever revealing the underlying mountpoint.
The crux is that the proposed mechanism already exists and that it is so
powerful as to cover cases where mounts are supposed to be updated with
new versions. Crucially, it offers an important flexibility. Namely that
updates to a system may either be forced or can be delayed and the
umount of the top mount be left to a service if it is a cooperative one.
This adds a new flag to move_mount() that allows to explicitly move a
beneath the top mount adhering to the following semantics:
* Mounts cannot be mounted beneath the rootfs. This restriction
encompasses the rootfs but also chroots via chroot() and pivot_root().
To mount a mount beneath the rootfs or a chroot, pivot_root() can be
used as illustrated above.
* The source mount must be a private mount to force the kernel to
allocate a new, unused peer group id. This isn't a required
restriction but a voluntary one. It avoids repeating a semantical
quirk that already exists today. If bind mounts which already have a
peer group id are inserted into mount trees that have the same peer
group id this can cause a lot of mount propagation events to be
generated (For example, consider running mount --bind /opt /opt in a
loop where the parent mount is a shared mount.).
* Avoid getting rid of the top mount in the kernel. Cooperative services
need to be able to unmount the top mount themselves.
This also avoids a good deal of additional complexity. The umount
would have to be propagated which would be another rather expensive
operation. So namespace_lock() and lock_mount_hash() would potentially
have to be held for a long time for both a mount and umount
propagation. That should be avoided.
* The path to mount beneath must be mounted and attached.
* The top mount and its parent must be in the caller's mount namespace
and the caller must be able to mount in that mount namespace.
* The caller must be able to unmount the top mount to prove that they
could reveal the underlying mount.
* The propagation tree is calculated based on the destination mount's
parent mount and the destination mount's mountpoint on the parent
mount. Of course, if the parent of the destination mount and the
destination mount are shared mounts in the same peer group and the
mountpoint of the new mount to be mounted is a subdir of their
->mnt_root then both will receive a mount of /opt. That's probably
easier to understand with an example. Assuming a standard shared
rootfs /:
mount --bind /opt /opt
mount --bind /tmp /opt
will cause the same mount tree as:
mount --bind /opt /opt
mount --beneath /tmp /opt
because both / and /opt are shared mounts/peers in the same peer
group and the /opt dentry is a subdirectory of both the parent's and
the child's ->mnt_root. If a mount tree like that is created it almost
always is an accident or abuse of mount propagation. Realistically
what most people probably mean in this scenarios is:
mount --bind /opt /opt
mount --make-private /opt
mount --make-shared /opt
This forces the allocation of a new separate peer group for the /opt
mount. Aferwards a mount --bind or mount --beneath actually makes
sense as the / and /opt mount belong to different peer groups. Before
that it's likely just confusion about what the user wanted to achieve.
* Refuse MOVE_MOUNT_BENEATH if:
(1) the @mnt_from has been overmounted in between path resolution and
acquiring @namespace_sem when locking @mnt_to. This avoids the
proliferation of shadow mounts.
(2) if @to_mnt is moved to a different mountpoint while acquiring
@namespace_sem to lock @to_mnt.
(3) if @to_mnt is unmounted while acquiring @namespace_sem to lock
@to_mnt.
(4) if the parent of the target mount propagates to the target mount
at the same mountpoint.
This would mean mounting @mnt_from on @mnt_to->mnt_parent and then
propagating a copy @c of @mnt_from onto @mnt_to. This defeats the
whole purpose of mounting @mnt_from beneath @mnt_to.
(5) if the parent mount @mnt_to->mnt_parent propagates to @mnt_from at
the same mountpoint.
If @mnt_to->mnt_parent propagates to @mnt_from this would mean
propagating a copy @c of @mnt_from on top of @mnt_from. Afterwards
@mnt_from would be mounted on top of @mnt_to->mnt_parent and
@mnt_to would be unmounted from @mnt->mnt_parent and remounted on
@mnt_from. But since @c is already mounted on @mnt_from, @mnt_to
would ultimately be remounted on top of @c. Afterwards, @mnt_from
would be covered by a copy @c of @mnt_from and @c would be covered
by @mnt_from itself. This defeats the whole purpose of mounting
@mnt_from beneath @mnt_to.
Cases (1) to (3) are required as they deal with races that would cause
bugs or unexpected behavior for users. Cases (4) and (5) refuse
semantical quirks that would not be a bug but would cause weird mount
trees to be created. While they can already be created via other means
(mount --bind /opt /opt x n) there's no reason to repeat past mistakes
in new features.
Link: https://man7.org/linux/man-pages/man8/systemd-sysext.8.html [1]
Link: https://brauner.io/2023/02/28/mounting-into-mount-namespaces.html [2]
Link: https://github.com/flatcar/sysext-bakery
Link: https://fedoraproject.org/wiki/Changes/Unified_Kernel_Support_Phase_1
Link: https://fedoraproject.org/wiki/Changes/Unified_Kernel_Support_Phase_2
Link: https://github.com/systemd/systemd/pull/26013
Reviewed-by: Seth Forshee (DigitalOcean) <sforshee@kernel.org>
Message-Id: <20230202-fs-move-mount-replace-v4-4-98f3d80d7eaa@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Currently, lock_mount() uses a goto to retry the lookup until it
succeeded in acquiring the namespace_lock() preventing the top mount
from being overmounted. While that's perfectly fine we want to lookup
the mountpoint on the parent of the top mount in later patches. So adapt
the code to make this easier to implement. Also, the for loop is
arguably a little cleaner and makes the code easier to follow. No
functional changes intended.
Reviewed-by: Seth Forshee (DigitalOcean) <sforshee@kernel.org>
Message-Id: <20230202-fs-move-mount-replace-v4-3-98f3d80d7eaa@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
The comment on top of __lookup_mnt() states that it finds the first
mount implying that there could be multiple mounts mounted at the same
dentry with the same parent.
On older kernels "shadow mounts" could be created during mount
propagation. So if a mount @m in the destination propagation tree
already had a child mount @p mounted at @mp then any mount @n we
propagated to @m at the same @mp would be appended after the preexisting
mount @p in @mount_hashtable. This was a completely direct way of
creating shadow mounts.
That direct way is gone but there are still subtle ways to create shadow
mounts. For example, when attaching a source mnt @mnt to a shared mount.
The root of the source mnt @mnt might be overmounted by a mount @o after
we finished path lookup but before we acquired the namespace semaphore
to copy the source mount tree @mnt.
After we acquired the namespace lock @mnt is copied including @o
covering it. After we attach @mnt to a shared mount @dest_mnt we end up
propagation it to all it's peer and slaves @d. If @d already has a mount
@n mounted on top of it we tuck @mnt beneath @n. This means, we mount
@mnt at @d and mount @n on @mnt. Now we have both @o and @n mounted on
the same mountpoint at @mnt.
Explain this in the documentation as this is pretty subtle.
Reviewed-by: Seth Forshee (DigitalOcean) <sforshee@kernel.org>
Message-Id: <20230202-fs-move-mount-replace-v4-2-98f3d80d7eaa@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Add a small helper to check whether a path refers to the root of the
mount instead of open-coding this everywhere.
Reviewed-by: Seth Forshee (DigitalOcean) <sforshee@kernel.org>
Message-Id: <20230202-fs-move-mount-replace-v4-1-98f3d80d7eaa@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQqUNBr3gm4hGXdBJlZ7Krx/gZQ6wUCZEYCQAAKCRBZ7Krx/gZQ
64FdAQDZ2hTDyZEWPt486dWYPYpiKyaGFXSXDGo7wgP0fiwxXQEA/mROKb6JqYw6
27mZ9A7qluT8r3AfTTQ0D+Yse/dr4AM=
=GA9W
-----END PGP SIGNATURE-----
Merge tag 'pull-fd' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull vfs fget updates from Al Viro:
"fget() to fdget() conversions"
* tag 'pull-fd' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
fuse_dev_ioctl(): switch to fdget()
cgroup_get_from_fd(): switch to fdget_raw()
bpf: switch to fdget_raw()
build_mount_idmapped(): switch to fdget()
kill the last remaining user of proc_ns_fget()
SVM-SEV: convert the rest of fget() uses to fdget() in there
convert sgx_set_attribute() to fdget()/fdput()
convert setns(2) to fdget()/fdput()
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCZEJxiQAKCRCRxhvAZXjc
oj4jAP4pt/SuHdZQzv9k2j+UA4hpDmwt7UUWhLxtycQrt9oEoQD/U9hCwnYY9Ksj
5TSZiK/OGyoslmF1zfAC+1R2crgr3A0=
=PpBS
-----END PGP SIGNATURE-----
Merge tag 'v6.4/vfs.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull misc vfs updates from Christian Brauner:
"This contains a pile of various smaller fixes. Most of them aren't
very interesting so this just highlights things worth mentioning:
- Various filesystems contained the same little helper to convert
from the mode of a dentry to the DT_* type of that dentry.
They have now all been switched to rely on the generic
fs_umode_to_dtype() helper. All custom helpers are removed (Jeff)
- Fsnotify now reports ACCESS and MODIFY events for splice
(Chung-Chiang Cheng)
- After converting timerfd a long time ago to rely on
wait_event_interruptible_*() apis, convert eventfd as well. This
removes the complex open-coded wait code (Wen Yang)
- Simplify sysctl registration for devpts, avoiding the declaration
of two tables. Instead, just use a prefixed path with
register_sysctl() (Luis)
- The setattr_should_drop_sgid() helper is now exported so NFS can
use it. By switching NFS to this helper an NFS setgid inheritance
bug is fixed (me)"
* tag 'v6.4/vfs.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
fs: hfsplus: remove WARN_ON() from hfsplus_cat_{read,write}_inode()
pnode: pass mountpoint directly
eventfd: use wait_event_interruptible_locked_irq() helper
splice: report related fsnotify events
fs: consolidate duplicate dt_type helpers
nfs: use vfs setgid helper
Update relatime comments to include equality
fs/buffer: Remove redundant assignment to err
fs_context: drop the unused lsm_flags member
fs/namespace: fnic: Switch to use %ptTd
Documentation: update idmappings.rst
devpts: simplify two-level sysctl registration for pty_kern_table
eventpoll: align comment with nested epoll limitation
Use %ptTd instead of open-coded variant to print contents
of time64_t type in human readable form.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
Pull ipc namespace update from Al Viro:
"Rik's patches reducing the amount of synchronize_rcu() triggered by
ipc namespace destruction.
I've some pending stuff reducing that on the normal umount side, but
it's nowhere near ready and Rik's stuff shouldn't be held back due to
conflicts - I'll just redo the parts of my series that stray into
ipc/*"
* 'work.namespace' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
ipc,namespace: batch free ipc_namespace structures
ipc,namespace: make ipc namespace allocation wait for pending free
Instead of waiting for an RCU grace period between each ipc_namespace
structure that is being freed, wait an RCU grace period for every batch
of ipc_namespace structures.
Thanks to Al Viro for the suggestion of the helper function.
This speeds up the run time of the test case that allocates ipc_namespaces
in a loop from 6 minutes, to a little over 1 second:
real 0m1.192s
user 0m0.038s
sys 0m1.152s
Signed-off-by: Rik van Riel <riel@surriel.com>
Reported-by: Chris Mason <clm@meta.com>
Tested-by: Giuseppe Scrivano <gscrivan@redhat.com>
Suggested-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Now that we converted everything to just rely on struct mnt_idmap move it all
into a separate file. This ensure that no code can poke around in struct
mnt_idmap without any dedicated helpers and makes it easier to extend it in the
future. Filesystems will now not be able to conflate mount and filesystem
idmappings as they are two distinct types and require distinct helpers that
cannot be used interchangeably. We are now also able to extend struct mnt_idmap
as we see fit.
Acked-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
Convert to struct mnt_idmap.
Remove legacy file_mnt_user_ns() and mnt_user_ns().
Last cycle we merged the necessary infrastructure in
256c8aed2b ("fs: introduce dedicated idmap type for mounts").
This is just the conversion to struct mnt_idmap.
Currently we still pass around the plain namespace that was attached to a
mount. This is in general pretty convenient but it makes it easy to
conflate namespaces that are relevant on the filesystem with namespaces
that are relevent on the mount level. Especially for non-vfs developers
without detailed knowledge in this area this can be a potential source for
bugs.
Once the conversion to struct mnt_idmap is done all helpers down to the
really low-level helpers will take a struct mnt_idmap argument instead of
two namespace arguments. This way it becomes impossible to conflate the two
eliminating the possibility of any bugs. All of the vfs and all filesystems
only operate on struct mnt_idmap.
Acked-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCY5by6AAKCRCRxhvAZXjc
onblAPsFzodV8/9UoCIkKxwn0aiclbiAITTWI9ZLulmKhm0I6wD/RUOLKjt12uZJ
m81UTfkWHopWKtQ+X3saZEcyYTNLugE=
=AtGb
-----END PGP SIGNATURE-----
Merge tag 'fs.idmapped.mnt_idmap.v6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/idmapping
Pull idmapping updates from Christian Brauner:
"Last cycle we've already made the interaction with idmapped mounts
more robust and type safe by introducing the vfs{g,u}id_t type. This
cycle we concluded the conversion and removed the legacy helpers.
Currently we still pass around the plain namespace that was attached
to a mount. This is in general pretty convenient but it makes it easy
to conflate namespaces that are relevant on the filesystem - with
namespaces that are relevent on the mount level. Especially for
filesystem developers without detailed knowledge in this area this can
be a potential source for bugs.
Instead of passing the plain namespace we introduce a dedicated type
struct mnt_idmap and replace the pointer with a pointer to a struct
mnt_idmap. There are no semantic or size changes for the mount struct
caused by this.
We then start converting all places aware of idmapped mounts to rely
on struct mnt_idmap. Once the conversion is done all helpers down to
the really low-level make_vfs{g,u}id() and from_vfs{g,u}id() will take
a struct mnt_idmap argument instead of two namespace arguments. This
way it becomes impossible to conflate the two removing and thus
eliminating the possibility of any bugs. Fwiw, I fixed some issues in
that area a while ago in ntfs3 and ksmbd in the past. Afterwards only
low-level code can ultimately use the associated namespace for any
permission checks. Even most of the vfs can be completely obivious
about this ultimately and filesystems will never interact with it in
any form in the future.
A struct mnt_idmap currently encompasses a simple refcount and pointer
to the relevant namespace the mount is idmapped to. If a mount isn't
idmapped then it will point to a static nop_mnt_idmap and if it
doesn't that it is idmapped. As usual there are no allocations or
anything happening for non-idmapped mounts. Everthing is carefully
written to be a nop for non-idmapped mounts as has always been the
case.
If an idmapped mount is created a struct mnt_idmap is allocated and a
reference taken on the relevant namespace. Each mount that gets
idmapped or inherits the idmap simply bumps the reference count on
struct mnt_idmap. Just a reminder that we only allow a mount to change
it's idmapping a single time and only if it hasn't already been
attached to the filesystems and has no active writers.
The actual changes are fairly straightforward but this will have huge
benefits for maintenance and security in the long run even if it
causes some churn.
Note that this also makes it possible to extend struct mount_idmap in
the future. For example, it would be possible to place the namespace
pointer in an anonymous union together with an idmapping struct. This
would allow us to expose an api to userspace that would let it specify
idmappings directly instead of having to go through the detour of
setting up namespaces at all"
* tag 'fs.idmapped.mnt_idmap.v6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/idmapping:
acl: conver higher-level helpers to rely on mnt_idmap
fs: introduce dedicated idmap type for mounts
copy_mnt_ns() has the old tree copied, with mntns binding *and* anything
bound on top of them skipped. Then it proceeds to walk both trees in
parallel. Unfortunately, it doesn't get the "skip the stuff we'd skipped
when copying" quite right. Consequences are minor (the ->mnt_root
comparison will return the situation to sanity pretty soon and the worst
we get is the unexpected subset of opened non-directories being switched
to new namespace), but it's confusing enough and it's not hard to get
the expected behaviour...
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Last cycle we've already made the interaction with idmapped mounts more
robust and type safe by introducing the vfs{g,u}id_t type. This cycle we
concluded the conversion and removed the legacy helpers.
Currently we still pass around the plain namespace that was attached to
a mount. This is in general pretty convenient but it makes it easy to
conflate filesystem and mount namespaces and what different roles they
have to play. Especially for filesystem developers without much
experience in this area this is an easy source for bugs.
Instead of passing the plain namespace we introduce a dedicated type
struct mnt_idmap and replace the pointer with a pointer to a struct
mnt_idmap. There are no semantic or size changes for the mount struct
caused by this.
We then start converting all places aware of idmapped mounts to rely on
struct mnt_idmap. Once the conversion is done all helpers down to the
really low-level make_vfs{g,u}id() and from_vfs{g,u}id() will take a
struct mnt_idmap argument instead of two namespace arguments. This way
it becomes impossible to conflate the two, removing and thus eliminating
the possibility of any bugs. Fwiw, I fixed some issues in that area a
while ago in ntfs3 and ksmbd in the past. Afterwards, only low-level
code can ultimately use the associated namespace for any permission
checks. Even most of the vfs can be ultimately completely oblivious
about this and filesystems will never interact with it directly in any
form in the future.
A struct mnt_idmap currently encompasses a simple refcount and a pointer
to the relevant namespace the mount is idmapped to. If a mount isn't
idmapped then it will point to a static nop_mnt_idmap. If it is an
idmapped mount it will point to a new struct mnt_idmap. As usual there
are no allocations or anything happening for non-idmapped mounts.
Everthing is carefully written to be a nop for non-idmapped mounts as
has always been the case.
If an idmapped mount or mount tree is created a new struct mnt_idmap is
allocated and a reference taken on the relevant namespace. For each
mount in a mount tree that gets idmapped or a mount that inherits the
idmap when it is cloned the reference count on the associated struct
mnt_idmap is bumped. Just a reminder that we only allow a mount to
change it's idmapping a single time and only if it hasn't already been
attached to the filesystems and has no active writers.
The actual changes are fairly straightforward. This will have huge
benefits for maintenance and security in the long run even if it causes
some churn. I'm aware that there's some cost for all of you. And I'll
commit to doing this work and make this as painless as I can.
Note that this also makes it possible to extend struct mount_idmap in
the future. For example, it would be possible to place the namespace
pointer in an anonymous union together with an idmapping struct. This
would allow us to expose an api to userspace that would let it specify
idmappings directly instead of having to go through the detour of
setting up namespaces at all.
This just adds the infrastructure and doesn't do any conversions.
Reviewed-by: Seth Forshee (DigitalOcean) <sforshee@kernel.org>
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
Idmapped mounts should not allow a user to map file ownsership into a
range of ids which is not under the control of that user. However, we
currently don't check whether the mounter is privileged wrt to the
target user namespace.
Currently no FS_USERNS_MOUNT filesystems support idmapped mounts, thus
this is not a problem as only CAP_SYS_ADMIN in init_user_ns is allowed
to set up idmapped mounts. But this could change in the future, so add a
check to refuse to create idmapped mounts when the mounter does not have
CAP_SYS_ADMIN in the target user namespace.
Fixes: bd303368b7 ("fs: support mapped mounts of mapped filesystems")
Signed-off-by: Seth Forshee <sforshee@digitalocean.com>
Reviewed-by: Christian Brauner (Microsoft) <brauner@kernel.org>
Link: https://lore.kernel.org/r/20220816164752.2595240-1-sforshee@digitalocean.com
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
The tricky case (__legitimize_mnt() failing after having grabbed
a reference) can be trivially dealt with by leaving nd->path.mnt
non-NULL, for terminate_walk() to drop it.
legitimize_mnt() becomes static after that.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
The fix is usermode_driver.c one - once you've done kern_mount(), you
must kern_unmount(); simple mntput() will end up with a leak. Several
failure exits in there messed up that way... In practice you won't
hit those particular failure exits without fault injection, though.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQqUNBr3gm4hGXdBJlZ7Krx/gZQ6wUCYpvrWQAKCRBZ7Krx/gZQ
6z29AP9EZVSyIvnwXleehpa2mEZhsp+KAKgV/ENaKHMn7jiH0wD/bfgnhxIDNuc5
108E2R5RWEYTynW5k7nnP5PsTsMq5Qc=
=b3Wc
-----END PGP SIGNATURE-----
Merge tag 'pull-18-rc1-work.mount' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull mount handling updates from Al Viro:
"Cleanups (and one fix) around struct mount handling.
The fix is usermode_driver.c one - once you've done kern_mount(), you
must kern_unmount(); simple mntput() will end up with a leak. Several
failure exits in there messed up that way... In practice you won't hit
those particular failure exits without fault injection, though"
* tag 'pull-18-rc1-work.mount' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
move mount-related externs from fs.h to mount.h
blob_to_mnt(): kern_unmount() is needed to undo kern_mount()
m->mnt_root->d_inode->i_sb is a weird way to spell m->mnt_sb...
linux/mount.h: trim includes
uninline may_mount() and don't opencode it in fspick(2)/fsopen(2)
Hold writers when changing a mount's idmapping to make it more robust.
The vfs layer takes care to retrieve the idmapping of a mount once
ensuring that the idmapping used for vfs permission checking is
identical to the idmapping passed down to the filesystem.
For ioctl codepaths the filesystem itself is responsible for taking the
idmapping into account if they need to. While all filesystems with
FS_ALLOW_IDMAP raised take the same precautions as the vfs we should
enforce it explicitly by making sure there are no active writers on the
relevant mount while changing the idmapping.
This is similar to turning a mount ro with the difference that in
contrast to turning a mount ro changing the idmapping can only ever be
done once while a mount can transition between ro and rw as much as it
wants.
This is a minor user-visible change. But it is extremely unlikely to
matter. The caller must've created a detached mount via OPEN_TREE_CLONE
and then handed that O_PATH fd to another process or thread which then
must've gotten a writable fd for that mount and started creating files
in there while the caller is still changing mount properties. While not
impossible it will be an extremely rare corner-case and should in
general be considered a bug in the application. Consider making a mount
MOUNT_ATTR_NOEXEC or MOUNT_ATTR_NODEV while allowing someone else to
perform lookups or exec'ing in parallel by handing them a copy of the
OPEN_TREE_CLONE fd or another fd beneath that mount.
Link: https://lore.kernel.org/r/20220510095840.152264-1-brauner@kernel.org
Cc: Seth Forshee <seth.forshee@digitalocean.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: linux-fsdevel@vger.kernel.org
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
Pull vfs updates from Al Viro:
"Assorted bits and pieces"
* 'work.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
aio: drop needless assignment in aio_read()
clean overflow checks in count_mounts() a bit
seq_file: fix NULL pointer arithmetic warning
uml/x86: use x86 load_unaligned_zeropad()
asm/user.h: killed unused macros
constify struct path argument of finish_automount()/do_add_mount()
fs: Remove FIXME comment in generic_write_checks()
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCYjr50AAKCRCRxhvAZXjc
oroBAQC0daGrkl6XJirLzyMVjNWWbuSEdB+Q3ipMrwySxjYmtwD/XSPGAKGBbHQz
13EtvTMT8FlqSyDIKHYBM5uDyrWQZgs=
=uJdq
-----END PGP SIGNATURE-----
Merge tag 'fs.rt.v5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux
Pull mount attributes PREEMPT_RT update from Christian Brauner:
"This contains Sebastian's fix to make changing mount
attributes/getting write access compatible with CONFIG_PREEMPT_RT.
The change only applies when users explicitly opt-in to real-time via
CONFIG_PREEMPT_RT otherwise things are exactly as before. We've waited
quite a long time with this to make sure folks could take a good look"
* tag 'fs.rt.v5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux:
fs/namespace: Boost the mount_lock.lock owner instead of spinning on PREEMPT_RT.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCYjrxKAAKCRCRxhvAZXjc
oi77AQDdLziGyeKSHlyPw1xeWiqsZVRLhhD07F8kVaAkjg3ZWwEAs3jL0Pzfnd7J
IIx//6YK46cbfc471FdVuUDfMjkfVAw=
=VaFd
-----END PGP SIGNATURE-----
Merge tag 'fs.v5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux
Pull mount_setattr updates from Christian Brauner:
"This contains a few more patches to massage the mount_setattr()
codepaths and one minor fix to reuse a helper we added some time back.
The final two patches do similar cleanups in different ways. One patch
is mine and the other is Al's who was nice enough to give me a branch
for it.
Since his came in later and my branch had been sitting in -next for
quite some time we just put his on top instead of swap them"
* tag 'fs.v5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux:
mount_setattr(): clean the control flow and calling conventions
fs: clean up mount_setattr control flow
fs: don't open-code mnt_hold_writers()
fs: simplify check in mount_setattr_commit()
fs: add mnt_allow_writers() and simplify mount_setattr_prepare()
Commit f8b92ba67c ("mount: Add mount warning for impending timestamp
expiry") introduced a mount warning regarding filesystem timestamp
limits, that is printed upon each writable mount or remount.
This can result in a lot of unnecessary messages in the kernel log in
setups where filesystems are being frequently remounted (or mounted
multiple times).
Avoid this by setting a superblock flag which indicates that the warning
has been emitted at least once for any particular mount, as suggested in
[1].
Link: https://lore.kernel.org/CAHk-=wim6VGnxQmjfK_tDg6fbHYKL4EFkmnTjVr9QnRqjDBAeA@mail.gmail.com/ [1]
Link: https://lkml.kernel.org/r/20220119202934.26495-1-ailiop@suse.com
Signed-off-by: Anthony Iliopoulos <ailiop@suse.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Acked-by: Christian Brauner <christian.brauner@ubuntu.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Deepa Dinamani <deepa.kernel@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Christian Brauner