Commit Graph

40 Commits

Author SHA1 Message Date
Chuck Lever 263453d9bb NFSD: Add nfsd4_encode_fattr4_change()
Refactor the encoder for FATTR4_CHANGE into a helper. In a
subsequent patch, this helper will be called from a bitmask loop.

The code is restructured a bit to use the modern xdr_stream flow,
and the encoded cinfo value is made const so that callers of the
encoders can be passed a const cinfo.

Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
2023-10-16 12:44:14 -04:00
Jeff Layton a332018a91 nfsd: handle failure to collect pre/post-op attrs more sanely
Collecting pre_op_attrs can fail, in which case it's probably best to
fail the whole operation.

Change fh_fill_pre_attrs and fh_fill_both_attrs to return __be32, and
have the callers check the return code and abort the operation if it's
not nfs_ok.

Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
2023-08-29 17:45:22 -04:00
Jeff Layton 3139b1d795 nfsd: move nfsd4_change_attribute to nfsfh.c
This is a pretty big function for inlining. Move it to being
non-inlined.

Acked-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: NeilBrown <neilb@suse.de>
Signed-off-by: Jeff Layton <jlayton@kernel.org>
2023-01-26 07:00:06 -05:00
Chuck Lever b48f8056c0 NFSD: Use const pointers as parameters to fh_ helpers
Enable callers to use const pointers where they are able to.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Tested-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: NeilBrown <neilb@suse.de>
2022-11-28 12:54:46 -05:00
NeilBrown dd8dd403d7 NFSD: discard fh_locked flag and fh_lock/fh_unlock
As all inode locking is now fully balanced, fh_put() does not need to
call fh_unlock().
fh_lock() and fh_unlock() are no longer used, so discard them.
These are the only real users of ->fh_locked, so discard that too.

Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
2022-08-04 10:28:48 -04:00
NeilBrown 19d008b469 NFSD: reduce locking in nfsd_lookup()
nfsd_lookup() takes an exclusive lock on the parent inode, but no
callers want the lock and it may not be needed at all if the
result is in the dcache.

Change nfsd_lookup_dentry() to not take the lock, and call
lookup_one_len_locked() which takes lock only if needed.

nfsd4_open() currently expects the lock to still be held, but that isn't
necessary as nfsd_validate_delegated_dentry() provides required
guarantees without the lock.

NOTE: NFSv4 requires directory changeinfo for OPEN even when a create
  wasn't requested and no change happened.  Now that nfsd_lookup()
  doesn't use fh_lock(), we need to explicitly fill the attributes
  when no create happens.  A new fh_fill_both_attrs() is provided
  for that task.

Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
2022-08-04 10:28:20 -04:00
Chuck Lever 5f9a62ff7d NFSD: Remove CONFIG_NFSD_V3
Eventually support for NFSv2 in the Linux NFS server is to be
deprecated and then removed.

However, NFSv2 is the "always supported" version that is available
as soon as CONFIG_NFSD is set.  Before NFSv2 support can be removed,
we need to choose a different "always supported" version.

This patch removes CONFIG_NFSD_V3 so that NFSv3 is always supported,
as NFSv2 is today. When NFSv2 support is removed, NFSv3 will become
the only "always supported" NFS version.

The defconfigs still need to be updated to remove CONFIG_NFSD_V3=y.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
2022-03-11 10:25:14 -05:00
Chuck Lever fcb5e3fa01 NFSD: Move fill_pre_wcc() and fill_post_wcc()
These functions are related to file handle processing and have
nothing to do with XDR encoding or decoding. Also they are no longer
NFSv3-specific. As a clean-up, move their definitions to a more
appropriate location. WCC is also an NFSv3-specific term, so rename
them as general-purpose helpers.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
2022-01-08 14:42:03 -05:00
NeilBrown d8b26071e6 NFSD: simplify struct nfsfh
Most of the fields in 'struct knfsd_fh' are 2 levels deep (a union and a
struct) and are accessed using macros like:

 #define fh_FOO fh_base.fh_new.fb_FOO

This patch makes the union and struct anonymous, so that "fh_FOO" can be
a name directly within 'struct knfsd_fh' and the #defines aren't needed.

The file handle as a whole is sometimes accessed as "fh_base" or
"fh_base.fh_pad", neither of which are particularly helpful names.
As the struct holding the filehandle is now anonymous, we
cannot use the name of that, so we union it with 'fh_raw' and use that
where the raw filehandle is needed.  fh_raw also ensure the structure is
large enough for the largest possible filehandle.

fh_raw is a 'char' array, removing any need to cast it for memcpy etc.

SVCFH_fmt() is simplified using the "%ph" printk format.  This
changes the appearance of filehandles in dprintk() debugging, making
them a little more precise.

Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2021-10-02 15:51:10 -04:00
NeilBrown c645a883df NFSD: drop support for ancient filehandles
Filehandles not in the "new" or "version 1" format have not been handed
out for new mounts since Linux 2.4 which was released 20 years ago.
I think it is safe to say that no such file handles are still in use,
and that we can drop support for them.

Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2021-10-02 15:51:10 -04:00
NeilBrown ef5825e3cf NFSD: move filehandle format declarations out of "uapi".
A small part of the declaration concerning filehandle format are
currently in the "uapi" include directory:
   include/uapi/linux/nfsd/nfsfh.h

There is a lot more to the filehandle format, including "enum fid_type"
and "enum nfsd_fsid" which are not exported via "uapi".

This small part of the filehandle definition is of minimal use outside
of the kernel, and I can find no evidence that an other code is using
it. Certainly nfs-utils and wireshark (The most likely candidates) do not
use these declarations.

So move it out of "uapi" by copying the content from
  include/uapi/linux/nfsd/nfsfh.h
into
  fs/nfsd/nfsfh.h

A few unnecessary "#include" directives are not copied, and neither is
the #define of fh_auth, which is annotated as being for userspace only.

The copyright claims in the uapi file are identical to those in the nfsd
file, so there is no need to copy those.

The "__u32" style integer types are only needed in "uapi".  In
kernel-only code we can use the more familiar "u32" style.

Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2021-10-02 15:50:45 -04:00
Chuck Lever 1736aec82a NFSD: Constify @fh argument of knfsd_fh_hash()
Enable knfsd_fh_hash() to be invoked in functions where the
filehandle pointer is a const.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2021-05-18 13:44:03 -04:00
Chuck Lever 2c42f804d3 NFSD: Update the GETATTR3res encoder to use struct xdr_stream
As an additional clean up, some renaming is done to more closely
reflect the data type and variable names used in the NFSv3 XDR
definition provided in RFC 1813. "attrstat" is an NFSv2 thingie.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
2021-03-22 10:18:51 -04:00
J. Bruce Fields 3cc55f4434 nfs: use change attribute for NFS re-exports
When exporting NFS, we may as well use the real change attribute
returned by the original server instead of faking up a change attribute
from the ctime.

Note we can't do that by setting I_VERSION--that would also turn on the
logic in iversion.h which treats the lower bit specially, and that
doesn't make sense for NFS.

So instead we define a new export operation for filesystems like NFS
that want to manage the change attribute themselves.

Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
2021-01-30 11:47:12 -05:00
Trond Myklebust 716a8bc7f7 nfsd: Record NFSv4 pre/post-op attributes as non-atomic
For the case of NFSv4, specify to the client that the pre/post-op
attributes were not recorded atomically with the main operation.

Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
2020-12-09 09:39:38 -05:00
Jeff Layton daab110e47 nfsd: add a new EXPORT_OP_NOWCC flag to struct export_operations
With NFSv3 nfsd will always attempt to send along WCC data to the
client. This generally involves saving off the in-core inode information
prior to doing the operation on the given filehandle, and then issuing a
vfs_getattr to it after the op.

Some filesystems (particularly clustered or networked ones) have an
expensive ->getattr inode operation. Atomicity is also often difficult
or impossible to guarantee on such filesystems. For those, we're best
off not trying to provide WCC information to the client at all, and to
simply allow it to poll for that information as needed with a GETATTR
RPC.

This patch adds a new flags field to struct export_operations, and
defines a new EXPORT_OP_NOWCC flag that filesystems can use to indicate
that nfsd should not attempt to provide WCC info in NFSv3 replies. It
also adds a blurb about the new flags field and flag to the exporting
documentation.

The server will also now skip collecting this information for NFSv2 as
well, since that info is never used there anyway.

Note that this patch does not add this flag to any filesystem
export_operations structures. This was originally developed to allow
reexporting nfs via nfsd.

Other filesystems may want to consider enabling this flag too. It's hard
to tell however which ones have export operations to enable export via
knfsd and which ones mostly rely on them for open-by-filehandle support,
so I'm leaving that up to the individual maintainers to decide. I am
cc'ing the relevant lists for those filesystems that I think may want to
consider adding this though.

Cc: HPDD-discuss@lists.01.org
Cc: ceph-devel@vger.kernel.org
Cc: cluster-devel@redhat.com
Cc: fuse-devel@lists.sourceforge.net
Cc: ocfs2-devel@oss.oracle.com
Signed-off-by: Jeff Layton <jeff.layton@primarydata.com>
Signed-off-by: Lance Shelton <lance.shelton@hammerspace.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
2020-12-09 09:39:38 -05:00
J. Bruce Fields 4b03d99794 nfsd: minor nfsd4_change_attribute cleanup
Minor cleanup, no change in behavior.

Also pull out a common helper that'll be useful elsewhere.

Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
2020-12-09 09:39:37 -05:00
J. Bruce Fields 70b87f7729 nfsd: only call inode_query_iversion in the I_VERSION case
inode_query_iversion() can modify i_version.  Depending on the exported
filesystem, that may not be safe.  For example, if you're re-exporting
NFS, NFS stores the server's change attribute in i_version and does not
expect it to be modified locally.  This has been observed causing
unnecessary cache invalidations.

The way a filesystem indicates that it's OK to call
inode_query_iverson() is by setting SB_I_VERSION.

So, move the I_VERSION check out of encode_change(), where it's used
only in GETATTR responses, to nfsd4_change_attribute(), which is
also called for pre- and post- operation attributes.

(Note we could also pull the NFSEXP_V4ROOT case into
nfsd4_change_attribute() as well.  That would actually be a no-op,
since pre/post attrs are only used for metadata-modifying operations,
and V4ROOT exports are read-only.  But we might make the change in
the future just for simplicity.)

Reported-by: Daire Byrne <daire@dneg.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
2020-12-09 09:39:37 -05:00
Arnd Bergmann 92c5e46911 nfsd: handle nfs3 timestamps as unsigned
The decode_time3 function behaves differently on 32-bit
and 64-bit architectures: on the former, a 32-bit timestamp
gets converted into an signed number and then into a timestamp
between 1902 and 2038, while on the latter it is interpreted
as unsigned in the range 1970-2106.

Change all the remaining 'timespec' in nfsd to 'timespec64'
to make the behavior the same, and use the current interpretation
of the dominant 64-bit architectures.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2019-12-19 17:46:08 -05:00
Olga Kornievskaia b9e8638e3d NFSD: allow inter server COPY to have a STALE source server fh
The inter server to server COPY source server filehandle
is a foreign filehandle as the COPY is sent to the destination
server.

Signed-off-by: Olga Kornievskaia <kolga@netapp.com>
2019-12-09 11:42:14 -05:00
Linus Torvalds f1517df870 This request is late, apologies.
But it's also a fairly small update this time around.  Some cleanup,
 RDMA fixes, overlayfs fixes, and a fix for an NFSv4 state bug.
 
 The bigger deal for nfsd this time around is Jeff Layton's
 already-merged i_version patches.  This series has a minor conflict with
 that one, and the resolution should be obvious.  (Stephen Rothwell has
 been carrying it in linux-next for what it's worth.)
 -----BEGIN PGP SIGNATURE-----
 
 iQIcBAABAgAGBQJafNVvAAoJECebzXlCjuG+yZUP/2SctFtkW638z9frLcIVt5M6
 x5hluw5jtFrVqq/KoMwi7rVaMzhdvcgwwfaLciqrPCOmcMKlOqiWslyCV0wZVCZS
 jabkOeinKVAyPTlESesNyArWKBWaB8QaYDwbkQ5Y76U9Ma5gwSghS1wc8vrNduZY
 2StieESOiOs9LljXf5SqCC5nN9s7gs4qtCK7aZ3JIt4661Lh39LqyO5zxLnc78eL
 USnJKHjTSreY2Vd1/TdNWyZhiim43wdrB+jpy6IoocTqyhYalkCz1iYdJn1arqtP
 iIddPpczKxkHekFVj7/Kfa+ATFtdXIpivOBhhOT0oY8HukTd58bh/oUMrFt4BSuP
 MQst0R9h1sanBE18XBPlXuIK51sm3AjjOGaQycl/Mzes+dMRgIP/KspAcnwwXHqG
 gyZsF3VzliFTc9s0SyiAz2AxNTUnjd+LV3E0DUeivURa6V3pc+sFlQzi8PRxRaep
 0gmhYcZsfwdDKZ/kbQyQdSWN48NxOLFke4fYjmoUtoyILa0NAHEqafeJkR5EiRTm
 tZsL9H/3THEGWygYlXGGBo/J4w5jE3uL/8KkfeuZefzSo0Ujqu0pBALMTnGFLKRx
 Mpw7JEqfUwqIVZ0Qh6q9yIcjr89qWv96UpBqRRIkFX5zOPN7B1BH8C89g8qy3Hyt
 gm/5BTw4FPE0uAM9Nhsd
 =icEX
 -----END PGP SIGNATURE-----

Merge tag 'nfsd-4.16' of git://linux-nfs.org/~bfields/linux

Pull nfsd update from Bruce Fields:
 "A fairly small update this time around. Some cleanup, RDMA fixes,
  overlayfs fixes, and a fix for an NFSv4 state bug.

  The bigger deal for nfsd this time around was Jeff Layton's
  already-merged i_version patches"

* tag 'nfsd-4.16' of git://linux-nfs.org/~bfields/linux:
  svcrdma: Fix Read chunk round-up
  NFSD: hide unused svcxdr_dupstr()
  nfsd: store stat times in fill_pre_wcc() instead of inode times
  nfsd: encode stat->mtime for getattr instead of inode->i_mtime
  nfsd: return RESOURCE not GARBAGE_ARGS on too many ops
  nfsd4: don't set lock stateid's sc_type to CLOSED
  nfsd: Detect unhashed stids in nfsd4_verify_open_stid()
  sunrpc: remove dead code in svc_sock_setbufsize
  svcrdma: Post Receives in the Receive completion handler
  nfsd4: permit layoutget of executable-only files
  lockd: convert nlm_rqst.a_count from atomic_t to refcount_t
  lockd: convert nlm_lockowner.count from atomic_t to refcount_t
  lockd: convert nsm_handle.sm_count from atomic_t to refcount_t
2018-02-08 15:18:32 -08:00
Amir Goldstein 39ca1bf624 nfsd: store stat times in fill_pre_wcc() instead of inode times
The time values in stat and inode may differ for overlayfs and stat time
values are the correct ones to use. This is also consistent with the fact
that fill_post_wcc() also stores stat time values.

This means introducing a stat call that could fail, where previously we
were just copying values out of the inode.  To be conservative about
changing behavior, we fall back to copying values out of the inode in
the error case.  It might be better just to clear fh_pre_saved (though
note the BUG_ON in set_change_info).

Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2018-02-08 13:40:17 -05:00
Jeff Layton 1f15a550f5 nfsd: convert to new i_version API
Mostly just making sure we use the "get" wrappers so we know when
it is being fetched for later use.

Signed-off-by: Jeff Layton <jlayton@redhat.com>
2018-01-29 06:42:21 -05:00
Greg Kroah-Hartman b24413180f License cleanup: add SPDX GPL-2.0 license identifier to files with no license
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.

By default all files without license information are under the default
license of the kernel, which is GPL version 2.

Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier.  The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.

This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.

How this work was done:

Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
 - file had no licensing information it it.
 - file was a */uapi/* one with no licensing information in it,
 - file was a */uapi/* one with existing licensing information,

Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.

The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne.  Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.

The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed.  Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.

Criteria used to select files for SPDX license identifier tagging was:
 - Files considered eligible had to be source code files.
 - Make and config files were included as candidates if they contained >5
   lines of source
 - File already had some variant of a license header in it (even if <5
   lines).

All documentation files were explicitly excluded.

The following heuristics were used to determine which SPDX license
identifiers to apply.

 - when both scanners couldn't find any license traces, file was
   considered to have no license information in it, and the top level
   COPYING file license applied.

   For non */uapi/* files that summary was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0                                              11139

   and resulted in the first patch in this series.

   If that file was a */uapi/* path one, it was "GPL-2.0 WITH
   Linux-syscall-note" otherwise it was "GPL-2.0".  Results of that was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0 WITH Linux-syscall-note                        930

   and resulted in the second patch in this series.

 - if a file had some form of licensing information in it, and was one
   of the */uapi/* ones, it was denoted with the Linux-syscall-note if
   any GPL family license was found in the file or had no licensing in
   it (per prior point).  Results summary:

   SPDX license identifier                            # files
   ---------------------------------------------------|------
   GPL-2.0 WITH Linux-syscall-note                       270
   GPL-2.0+ WITH Linux-syscall-note                      169
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause)    21
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause)    17
   LGPL-2.1+ WITH Linux-syscall-note                      15
   GPL-1.0+ WITH Linux-syscall-note                       14
   ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause)    5
   LGPL-2.0+ WITH Linux-syscall-note                       4
   LGPL-2.1 WITH Linux-syscall-note                        3
   ((GPL-2.0 WITH Linux-syscall-note) OR MIT)              3
   ((GPL-2.0 WITH Linux-syscall-note) AND MIT)             1

   and that resulted in the third patch in this series.

 - when the two scanners agreed on the detected license(s), that became
   the concluded license(s).

 - when there was disagreement between the two scanners (one detected a
   license but the other didn't, or they both detected different
   licenses) a manual inspection of the file occurred.

 - In most cases a manual inspection of the information in the file
   resulted in a clear resolution of the license that should apply (and
   which scanner probably needed to revisit its heuristics).

 - When it was not immediately clear, the license identifier was
   confirmed with lawyers working with the Linux Foundation.

 - If there was any question as to the appropriate license identifier,
   the file was flagged for further research and to be revisited later
   in time.

In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.

Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights.  The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.

Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.

In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.

Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
 - a full scancode scan run, collecting the matched texts, detected
   license ids and scores
 - reviewing anything where there was a license detected (about 500+
   files) to ensure that the applied SPDX license was correct
 - reviewing anything where there was no detection but the patch license
   was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
   SPDX license was correct

This produced a worksheet with 20 files needing minor correction.  This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.

These .csv files were then reviewed by Greg.  Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected.  This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.)  Finally Greg ran the script using the .csv files to
generate the patches.

Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-02 11:10:55 +01:00
J. Bruce Fields 630458e730 nfsd4: factor ctime into change attribute
Factoring ctime into the nfsv4 change attribute gives us better
properties than just i_version alone.

Eventually we'll likely also expose this (as opposed to raw i_version)
to userspace, at which point we'll want to move it to a common helper,
called from either userspace or individual filesystems.  For now, nfsd
is the only user.

Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2017-07-12 15:55:00 -04:00
Al Viro 5955102c99 wrappers for ->i_mutex access
parallel to mutex_{lock,unlock,trylock,is_locked,lock_nested},
inode_foo(inode) being mutex_foo(&inode->i_mutex).

Please, use those for access to ->i_mutex; over the coming cycle
->i_mutex will become rwsem, with ->lookup() done with it held
only shared.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2016-01-22 18:04:28 -05:00
Jeff Layton 6e8b50d16a nfsd: add new io class tracepoint
Add some new tracepoints in the nfsd read/write codepaths. The idea
is that this will give us the ability to measure how long each phase of
a read or write operation takes.

Signed-off-by: Jeff Layton <jeff.layton@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2016-01-14 17:32:51 -05:00
Jeff Layton aaf91ec148 nfsd: switch unsigned char flags in svc_fh to bools
...just for clarity.

Signed-off-by: Jeff Layton <jeff.layton@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2015-10-12 17:31:04 -04:00
Jeff Layton fcaba026a5 nfsd: move svc_fh->fh_maxsize to just after fh_handle
This moves the hole in the struct down below the flags fields, which
allows us to potentially add a new flag without growing the struct.

Signed-off-by: Jeff Layton <jeff.layton@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2015-10-12 17:31:04 -04:00
David Howells 2b0143b5c9 VFS: normal filesystems (and lustre): d_inode() annotations
that's the bulk of filesystem drivers dealing with inodes of their own

Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-04-15 15:06:57 -04:00
Dan Carpenter 0ab39de6b3 nfsd: fix comparison in fh_fsid_match()
We're supposed to be testing that the fh_fsid's match but because the
parenthesis are in the wrong place, then we only check the first
byte.

Fixes: 9558f2500a ('nfsd: add fh_fsid_match helper')
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2015-02-12 11:26:19 -05:00
Christoph Hellwig 9558f2500a nfsd: add fh_fsid_match helper
Add a helper to check that the fsid parts of two file handles match.

Signed-off-by: Christoph Hellwig <hch@lst.de>
2015-02-02 18:09:39 +01:00
Christoph Hellwig 4d94c2ef20 nfsd: move nfsd_fh_match to nfsfh.h
The pnfs code will need it too.  Also remove the nfsd_ prefix to match the
other filehandle helpers in that file.

Signed-off-by: Christoph Hellwig <hch@lst.de>
2015-02-02 18:09:39 +01:00
Jeff Layton 94ec938b61 nfsd: add appropriate __force directives to filehandle generation code
The filehandle structs all use host-endian values, but will sometimes
stuff big-endian values into those fields. This is OK since these
values are opaque to the client, but it confuses sparse. Add __force to
make it clear that we are doing this intentionally.

Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2014-06-23 11:31:37 -04:00
Christoph Hellwig 9c69de4c94 nfsd: remove <linux/nfsd/nfsfh.h>
The only real user of this header is fs/nfsd/nfsfh.h, so merge the
two.  Various lockѕ source files used it to indirectly get other
sunrpc or nfs headers, so fix those up.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2014-05-06 17:54:53 -04:00
Kinglong Mee 2336745e87 NFSD: Clear wcc data between compound ops
Testing NFS4.0 by pynfs, I got some messeages as,
"nfsd: inode locked twice during operation."

When one compound RPC contains two or more ops that locks
the filehandle,the second op will cause the message.

As two SETATTR ops, after the first SETATTR, nfsd will not call
fh_put() to release current filehandle, it means filehandle have
unlocked with fh_post_saved = 1.
The second SETATTR find fh_post_saved = 1, and printk the message.

v2: introduce helper fh_clear_wcc().

Signed-off-by: Kinglong Mee <kinglongmee@gmail.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2014-03-30 10:47:34 -04:00
Al Viro a6a9f18f0a nfsd: switch to %p[dD]
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-10-24 23:34:51 -04:00
Al Viro 175a4eb7ea fs: propagate umode_t, misc bits
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-01-03 22:55:10 -05:00
J. Bruce Fields b1e86db1de nfsd: fix BUG at fs/nfsd/nfsfh.h:199 on unlink
As of commit 43a9aa64a2 "NFSD:
Fill in WCC data for REMOVE, RMDIR, MKNOD, and MKDIR", we sometimes call
fh_unlock on a filehandle that isn't fully initialized.

We should fix up the callers, but as a quick fix it is also sufficient
just to remove this assertion.

Reported-by: Marius Tolzmann <tolzmann@molgen.mpg.de>
Cc: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2010-10-13 15:48:55 -04:00
J. Bruce Fields 1557aca790 nfsd: move most of nfsfh.h to fs/nfsd
Most of this can be trivially moved to a private header as well.

Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
2009-12-15 15:01:46 -05:00