The bpf_session_cookie is unavailable for !CONFIG_FPROBE as reported
by Sebastian [1].
To fix that we remove CONFIG_FPROBE ifdef for session kfuncs, which
is fine, because there's filter for session programs.
Then based on bpf_trace.o dependency:
obj-$(CONFIG_BPF_EVENTS) += bpf_trace.o
we add bpf_session_cookie BTF_ID in special_kfunc_set list dependency
on CONFIG_BPF_EVENTS.
[1] https://lore.kernel.org/bpf/20240531071557.MvfIqkn7@linutronix.de/T/#m71c6d5ec71db2967288cb79acedc15cc5dbfeec5
Reported-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Tested-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Suggested-by: Alexei Starovoitov <ast@kernel.org>
Fixes: 5c919acef8 ("bpf: Add support for kprobe session cookie")
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20240531194500.2967187-1-jolsa@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Current release - regressions:
- gro: initialize network_offset in network layer
- tcp: reduce accepted window in NEW_SYN_RECV state
Current release - new code bugs:
- eth: mlx5e: do not use ptp structure for tx ts stats when not initialized
- eth: ice: check for unregistering correct number of devlink params
Previous releases - regressions:
- bpf: Allow delete from sockmap/sockhash only if update is allowed
- sched: taprio: extend minimum interval restriction to entire cycle too
- netfilter: ipset: add list flush to cancel_gc
- ipv4: fix address dump when IPv4 is disabled on an interface
- sock_map: avoid race between sock_map_close and sk_psock_put
- eth: mlx5: use mlx5_ipsec_rx_status_destroy to correctly delete status rules
Previous releases - always broken:
- core: fix __dst_negative_advice() race
- bpf:
- fix multi-uprobe PID filtering logic
- fix pkt_type override upon netkit pass verdict
- netfilter: tproxy: bail out if IP has been disabled on the device
- af_unix: annotate data-race around unix_sk(sk)->addr
- eth: mlx5e: fix UDP GSO for encapsulated packets
- eth: idpf: don't enable NAPI and interrupts prior to allocating Rx buffers
- eth: i40e: fully suspend and resume IO operations in EEH case
- eth: octeontx2-pf: free send queue buffers incase of leaf to inner
- eth: ipvlan: dont Use skb->sk in ipvlan_process_v{4,6}_outbound
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-----BEGIN PGP SIGNATURE-----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=xkIZ
-----END PGP SIGNATURE-----
Merge tag 'net-6.10-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from bpf and netfilter.
Current release - regressions:
- gro: initialize network_offset in network layer
- tcp: reduce accepted window in NEW_SYN_RECV state
Current release - new code bugs:
- eth: mlx5e: do not use ptp structure for tx ts stats when not
initialized
- eth: ice: check for unregistering correct number of devlink params
Previous releases - regressions:
- bpf: Allow delete from sockmap/sockhash only if update is allowed
- sched: taprio: extend minimum interval restriction to entire cycle
too
- netfilter: ipset: add list flush to cancel_gc
- ipv4: fix address dump when IPv4 is disabled on an interface
- sock_map: avoid race between sock_map_close and sk_psock_put
- eth: mlx5: use mlx5_ipsec_rx_status_destroy to correctly delete
status rules
Previous releases - always broken:
- core: fix __dst_negative_advice() race
- bpf:
- fix multi-uprobe PID filtering logic
- fix pkt_type override upon netkit pass verdict
- netfilter: tproxy: bail out if IP has been disabled on the device
- af_unix: annotate data-race around unix_sk(sk)->addr
- eth: mlx5e: fix UDP GSO for encapsulated packets
- eth: idpf: don't enable NAPI and interrupts prior to allocating Rx
buffers
- eth: i40e: fully suspend and resume IO operations in EEH case
- eth: octeontx2-pf: free send queue buffers incase of leaf to inner
- eth: ipvlan: dont Use skb->sk in ipvlan_process_v{4,6}_outbound"
* tag 'net-6.10-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (69 commits)
netdev: add qstat for csum complete
ipvlan: Dont Use skb->sk in ipvlan_process_v{4,6}_outbound
net: ena: Fix redundant device NUMA node override
ice: check for unregistering correct number of devlink params
ice: fix 200G PHY types to link speed mapping
i40e: Fully suspend and resume IO operations in EEH case
i40e: factoring out i40e_suspend/i40e_resume
e1000e: move force SMBUS near the end of enable_ulp function
net: dsa: microchip: fix RGMII error in KSZ DSA driver
ipv4: correctly iterate over the target netns in inet_dump_ifaddr()
net: fix __dst_negative_advice() race
nfc/nci: Add the inconsistency check between the input data length and count
MAINTAINERS: dwmac: starfive: update Maintainer
net/sched: taprio: extend minimum interval restriction to entire cycle too
net/sched: taprio: make q->picos_per_byte available to fill_sched_entry()
netfilter: nft_fib: allow from forward/input without iif selector
netfilter: tproxy: bail out if IP has been disabled on the device
netfilter: nft_payload: skbuff vlan metadata mangle support
net: ti: icssg-prueth: Fix start counter for ft1 filter
sock_map: avoid race between sock_map_close and sk_psock_put
...
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTFp0I1jqZrAX+hPRXbK58LschIgwUCZlTGFAAKCRDbK58LschI
g5NXAP0QRn8nBSxJHIswFSOwRiCyhOhR7YL2P0c+RGcRMA+ZSAD9E1cwsYXsPu3L
ummQ52AMaMfouHg6aW+rFIoupkGSnwc=
=QctA
-----END PGP SIGNATURE-----
Merge tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf
Daniel Borkmann says:
====================
pull-request: bpf 2024-05-27
We've added 15 non-merge commits during the last 7 day(s) which contain
a total of 18 files changed, 583 insertions(+), 55 deletions(-).
The main changes are:
1) Fix broken BPF multi-uprobe PID filtering logic which filtered by thread
while the promise was to filter by process, from Andrii Nakryiko.
2) Fix the recent influx of syzkaller reports to sockmap which triggered
a locking rule violation by performing a map_delete, from Jakub Sitnicki.
3) Fixes to netkit driver in particular on skb->pkt_type override upon pass
verdict, from Daniel Borkmann.
4) Fix an integer overflow in resolve_btfids which can wrongly trigger build
failures, from Friedrich Vock.
5) Follow-up fixes for ARC JIT reported by static analyzers,
from Shahab Vahedi.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
selftests/bpf: Cover verifier checks for mutating sockmap/sockhash
Revert "bpf, sockmap: Prevent lock inversion deadlock in map delete elem"
bpf: Allow delete from sockmap/sockhash only if update is allowed
selftests/bpf: Add netkit test for pkt_type
selftests/bpf: Add netkit tests for mac address
netkit: Fix pkt_type override upon netkit pass verdict
netkit: Fix setting mac address in l2 mode
ARC, bpf: Fix issues reported by the static analyzers
selftests/bpf: extend multi-uprobe tests with USDTs
selftests/bpf: extend multi-uprobe tests with child thread case
libbpf: detect broken PID filtering logic for multi-uprobe
bpf: remove unnecessary rcu_read_{lock,unlock}() in multi-uprobe attach logic
bpf: fix multi-uprobe PID filtering logic
bpf: Fix potential integer overflow in resolve_btfids
MAINTAINERS: Add myself as reviewer of ARM64 BPF JIT
====================
Link: https://lore.kernel.org/r/20240527203551.29712-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
btf_find_struct_member() might return NULL or an error via the
ERR_PTR() macro. However, its caller in parse_btf_field() only checks
for the NULL condition. Fix this by using IS_ERR() and returning the
error up the stack.
Link: https://lore.kernel.org/all/20240527094351.15687-1-clopez@suse.de/
Fixes: c440adfbe3 ("tracing/probes: Support BTF based data structure field access")
Signed-off-by: Carlos López <clopez@suse.de>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
get_pid_task() internally already calls rcu_read_lock() and
rcu_read_unlock(), so there is no point to do this one extra time.
This is a drive-by improvement and has no correctness implications.
Acked-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20240521163401.3005045-3-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Current implementation of PID filtering logic for multi-uprobes in
uprobe_prog_run() is filtering down to exact *thread*, while the intent
for PID filtering it to filter by *process* instead. The check in
uprobe_prog_run() also differs from the analogous one in
uprobe_multi_link_filter() for some reason. The latter is correct,
checking task->mm, not the task itself.
Fix the check in uprobe_prog_run() to perform the same task->mm check.
While doing this, we also update get_pid_task() use to use PIDTYPE_TGID
type of lookup, given the intent is to get a representative task of an
entire process. This doesn't change behavior, but seems more logical. It
would hold task group leader task now, not any random thread task.
Last but not least, given multi-uprobe support is half-broken due to
this PID filtering logic (depending on whether PID filtering is
important or not), we need to make it easy for user space consumers
(including libbpf) to easily detect whether PID filtering logic was
already fixed.
We do it here by adding an early check on passed pid parameter. If it's
negative (and so has no chance of being a valid PID), we return -EINVAL.
Previous behavior would eventually return -ESRCH ("No process found"),
given there can't be any process with negative PID. This subtle change
won't make any practical change in behavior, but will allow applications
to detect PID filtering fixes easily. Libbpf fixes take advantage of
this in the next patch.
Cc: stable@vger.kernel.org
Acked-by: Jiri Olsa <jolsa@kernel.org>
Fixes: b733eeade4 ("bpf: Add pid filter support for uprobe_multi link")
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20240521163401.3005045-2-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Recent changes made uprobe_cpu_buffer preparation lazy, and moved it
deeper into __uprobe_trace_func(). This is problematic because
__uprobe_trace_func() is called inside rcu_read_lock()/rcu_read_unlock()
block, which then calls prepare_uprobe_buffer() -> uprobe_buffer_get() ->
mutex_lock(&ucb->mutex), leading to a splat about using mutex under
non-sleepable RCU:
BUG: sleeping function called from invalid context at kernel/locking/mutex.c:585
in_atomic(): 0, irqs_disabled(): 0, non_block: 0, pid: 98231, name: stress-ng-sigq
preempt_count: 0, expected: 0
RCU nest depth: 1, expected: 0
...
Call Trace:
<TASK>
dump_stack_lvl+0x3d/0xe0
__might_resched+0x24c/0x270
? prepare_uprobe_buffer+0xd5/0x1d0
__mutex_lock+0x41/0x820
? ___perf_sw_event+0x206/0x290
? __perf_event_task_sched_in+0x54/0x660
? __perf_event_task_sched_in+0x54/0x660
prepare_uprobe_buffer+0xd5/0x1d0
__uprobe_trace_func+0x4a/0x140
uprobe_dispatcher+0x135/0x280
? uprobe_dispatcher+0x94/0x280
uprobe_notify_resume+0x650/0xec0
? atomic_notifier_call_chain+0x21/0x110
? atomic_notifier_call_chain+0xf8/0x110
irqentry_exit_to_user_mode+0xe2/0x1e0
asm_exc_int3+0x35/0x40
RIP: 0033:0x7f7e1d4da390
Code: 33 04 00 0f 1f 80 00 00 00 00 f3 0f 1e fa b9 01 00 00 00 e9 b2 fc ff ff 66 90 f3 0f 1e fa 31 c9 e9 a5 fc ff ff 0f 1f 44 00 00 <cc> 0f 1e fa b8 27 00 00 00 0f 05 c3 0f 1f 40 00 f3 0f 1e fa b8 6e
RSP: 002b:00007ffd2abc3608 EFLAGS: 00000246
RAX: 0000000000000000 RBX: 0000000076d325f1 RCX: 0000000000000000
RDX: 0000000076d325f1 RSI: 000000000000000a RDI: 00007ffd2abc3690
RBP: 000000000000000a R08: 00017fb700000000 R09: 00017fb700000000
R10: 00017fb700000000 R11: 0000000000000246 R12: 0000000000017ff2
R13: 00007ffd2abc3610 R14: 0000000000000000 R15: 00007ffd2abc3780
</TASK>
Luckily, it's easy to fix by moving prepare_uprobe_buffer() to be called
slightly earlier: into uprobe_trace_func() and uretprobe_trace_func(), outside
of RCU locked section. This still keeps this buffer preparation lazy and helps
avoid the overhead when it's not needed. E.g., if there is only BPF uprobe
handler installed on a given uprobe, buffer won't be initialized.
Note, the other user of prepare_uprobe_buffer(), __uprobe_perf_func(), is not
affected, as it doesn't prepare buffer under RCU read lock.
Link: https://lore.kernel.org/all/20240521053017.3708530-1-andrii@kernel.org/
Fixes: 1b8f85defb ("uprobes: prepare uprobe args buffer lazily")
Reported-by: Breno Leitao <leitao@debian.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
- Fix a very tight race between the ring buffer readers and resizing
the ring buffer.
- Correct some stale comments in the ring buffer code.
- Fix kernel-doc in the rv code.
- Add a MODULE_DESCRIPTION to preemptirq_delay_test
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCZk6PYBQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qrn2AP4//ghUBbEtOJTXOocvyofTGZNQrZ+3
YEAkwmtB4BS0OwEAqR9N1ov6K7r0K10W8x/wNJyfkKsMWa3MwftHqQklvgQ=
=fNlg
-----END PGP SIGNATURE-----
Merge tag 'trace-fixes-v6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing fixes from Steven Rostedt:
"Minor last minute fixes:
- Fix a very tight race between the ring buffer readers and resizing
the ring buffer
- Correct some stale comments in the ring buffer code
- Fix kernel-doc in the rv code
- Add a MODULE_DESCRIPTION to preemptirq_delay_test"
* tag 'trace-fixes-v6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
rv: Update rv_en(dis)able_monitor doc to match kernel-doc
tracing: Add MODULE_DESCRIPTION() to preemptirq_delay_test
ring-buffer: Fix a race between readers and resize checks
ring-buffer: Correct stale comments related to non-consuming readers
With the rework of how the __string() handles dynamic strings where it
saves off the source string in field in the helper structure[1], the
assignment of that value to the trace event field is stored in the helper
value and does not need to be passed in again.
This means that with:
__string(field, mystring)
Which use to be assigned with __assign_str(field, mystring), no longer
needs the second parameter and it is unused. With this, __assign_str()
will now only get a single parameter.
There's over 700 users of __assign_str() and because coccinelle does not
handle the TRACE_EVENT() macro I ended up using the following sed script:
git grep -l __assign_str | while read a ; do
sed -e 's/\(__assign_str([^,]*[^ ,]\) *,[^;]*/\1)/' $a > /tmp/test-file;
mv /tmp/test-file $a;
done
I then searched for __assign_str() that did not end with ';' as those
were multi line assignments that the sed script above would fail to catch.
Note, the same updates will need to be done for:
__assign_str_len()
__assign_rel_str()
__assign_rel_str_len()
I tested this with both an allmodconfig and an allyesconfig (build only for both).
[1] https://lore.kernel.org/linux-trace-kernel/20240222211442.634192653@goodmis.org/
Link: https://lore.kernel.org/linux-trace-kernel/20240516133454.681ba6a0@rorschach.local.home
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Julia Lawall <Julia.Lawall@inria.fr>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Acked-by: Christian König <christian.koenig@amd.com> for the amdgpu parts.
Acked-by: Thomas Hellström <thomas.hellstrom@linux.intel.com> #for
Acked-by: Rafael J. Wysocki <rafael@kernel.org> # for thermal
Acked-by: Takashi Iwai <tiwai@suse.de>
Acked-by: Darrick J. Wong <djwong@kernel.org> # xfs
Tested-by: Guenter Roeck <linux@roeck-us.net>
The reader code in rb_get_reader_page() swaps a new reader page into the
ring buffer by doing cmpxchg on old->list.prev->next to point it to the
new page. Following that, if the operation is successful,
old->list.next->prev gets updated too. This means the underlying
doubly-linked list is temporarily inconsistent, page->prev->next or
page->next->prev might not be equal back to page for some page in the
ring buffer.
The resize operation in ring_buffer_resize() can be invoked in parallel.
It calls rb_check_pages() which can detect the described inconsistency
and stop further tracing:
[ 190.271762] ------------[ cut here ]------------
[ 190.271771] WARNING: CPU: 1 PID: 6186 at kernel/trace/ring_buffer.c:1467 rb_check_pages.isra.0+0x6a/0xa0
[ 190.271789] Modules linked in: [...]
[ 190.271991] Unloaded tainted modules: intel_uncore_frequency(E):1 skx_edac(E):1
[ 190.272002] CPU: 1 PID: 6186 Comm: cmd.sh Kdump: loaded Tainted: G E 6.9.0-rc6-default #5 158d3e1e6d0b091c34c3b96bfd99a1c58306d79f
[ 190.272011] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.16.0-0-gd239552c-rebuilt.opensuse.org 04/01/2014
[ 190.272015] RIP: 0010:rb_check_pages.isra.0+0x6a/0xa0
[ 190.272023] Code: [...]
[ 190.272028] RSP: 0018:ffff9c37463abb70 EFLAGS: 00010206
[ 190.272034] RAX: ffff8eba04b6cb80 RBX: 0000000000000007 RCX: ffff8eba01f13d80
[ 190.272038] RDX: ffff8eba01f130c0 RSI: ffff8eba04b6cd00 RDI: ffff8eba0004c700
[ 190.272042] RBP: ffff8eba0004c700 R08: 0000000000010002 R09: 0000000000000000
[ 190.272045] R10: 00000000ffff7f52 R11: ffff8eba7f600000 R12: ffff8eba0004c720
[ 190.272049] R13: ffff8eba00223a00 R14: 0000000000000008 R15: ffff8eba067a8000
[ 190.272053] FS: 00007f1bd64752c0(0000) GS:ffff8eba7f680000(0000) knlGS:0000000000000000
[ 190.272057] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 190.272061] CR2: 00007f1bd6662590 CR3: 000000010291e001 CR4: 0000000000370ef0
[ 190.272070] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 190.272073] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 190.272077] Call Trace:
[ 190.272098] <TASK>
[ 190.272189] ring_buffer_resize+0x2ab/0x460
[ 190.272199] __tracing_resize_ring_buffer.part.0+0x23/0xa0
[ 190.272206] tracing_resize_ring_buffer+0x65/0x90
[ 190.272216] tracing_entries_write+0x74/0xc0
[ 190.272225] vfs_write+0xf5/0x420
[ 190.272248] ksys_write+0x67/0xe0
[ 190.272256] do_syscall_64+0x82/0x170
[ 190.272363] entry_SYSCALL_64_after_hwframe+0x76/0x7e
[ 190.272373] RIP: 0033:0x7f1bd657d263
[ 190.272381] Code: [...]
[ 190.272385] RSP: 002b:00007ffe72b643f8 EFLAGS: 00000246 ORIG_RAX: 0000000000000001
[ 190.272391] RAX: ffffffffffffffda RBX: 0000000000000002 RCX: 00007f1bd657d263
[ 190.272395] RDX: 0000000000000002 RSI: 0000555a6eb538e0 RDI: 0000000000000001
[ 190.272398] RBP: 0000555a6eb538e0 R08: 000000000000000a R09: 0000000000000000
[ 190.272401] R10: 0000555a6eb55190 R11: 0000000000000246 R12: 00007f1bd6662500
[ 190.272404] R13: 0000000000000002 R14: 00007f1bd6667c00 R15: 0000000000000002
[ 190.272412] </TASK>
[ 190.272414] ---[ end trace 0000000000000000 ]---
Note that ring_buffer_resize() calls rb_check_pages() only if the parent
trace_buffer has recording disabled. Recent commit d78ab79270
("tracing: Stop current tracer when resizing buffer") causes that it is
now always the case which makes it more likely to experience this issue.
The window to hit this race is nonetheless very small. To help
reproducing it, one can add a delay loop in rb_get_reader_page():
ret = rb_head_page_replace(reader, cpu_buffer->reader_page);
if (!ret)
goto spin;
for (unsigned i = 0; i < 1U << 26; i++) /* inserted delay loop */
__asm__ __volatile__ ("" : : : "memory");
rb_list_head(reader->list.next)->prev = &cpu_buffer->reader_page->list;
.. and then run the following commands on the target system:
echo 1 > /sys/kernel/tracing/events/sched/sched_switch/enable
while true; do
echo 16 > /sys/kernel/tracing/buffer_size_kb; sleep 0.1
echo 8 > /sys/kernel/tracing/buffer_size_kb; sleep 0.1
done &
while true; do
for i in /sys/kernel/tracing/per_cpu/*; do
timeout 0.1 cat $i/trace_pipe; sleep 0.2
done
done
To fix the problem, make sure ring_buffer_resize() doesn't invoke
rb_check_pages() concurrently with a reader operating on the same
ring_buffer_per_cpu by taking its cpu_buffer->reader_lock.
Link: https://lore.kernel.org/linux-trace-kernel/20240517134008.24529-3-petr.pavlu@suse.com
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Fixes: 659f451ff2 ("ring-buffer: Add integrity check at end of iter read")
Signed-off-by: Petr Pavlu <petr.pavlu@suse.com>
[ Fixed whitespace ]
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Adjust the following code documentation:
* Kernel-doc comments for ring_buffer_read_prepare() and
ring_buffer_read_finish() mention that recording to the ring buffer is
disabled when the read is active. Remove mention of this restriction
because it was already lifted in commit 1039221cc2 ("ring-buffer: Do
not disable recording when there is an iterator").
* Function ring_buffer_read_finish() performs a self-check of the
ring-buffer by locking cpu_buffer->reader_lock and then calling
rb_check_pages(). The preceding comment explains that the lock is
needed because rb_check_pages() clears the HEAD flag required by
readers which might be running in parallel. Remove this explanation
because commit 8843e06f67 ("ring-buffer: Handle race between
rb_move_tail and rb_check_pages") simplified the function so it no
longer resets the mentioned flag. Nonetheless, the lock is still
needed because a reader swapping a page into the ring buffer can make
the underlying doubly-linked list temporarily inconsistent.
This is a non-functional change.
Link: https://lore.kernel.org/linux-trace-kernel/20240517134008.24529-2-petr.pavlu@suse.com
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Petr Pavlu <petr.pavlu@suse.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Notable series include:
- Some maintenance and performance work for ocfs2 in Heming Zhao's
series "improve write IO performance when fragmentation is high".
- Some ocfs2 bugfixes from Su Yue in the series "ocfs2 bugs fixes
exposed by fstests".
- kfifo header rework from Andy Shevchenko in the series "kfifo: Clean
up kfifo.h".
- GDB script fixes from Florian Rommel in the series "scripts/gdb: Fixes
for $lx_current and $lx_per_cpu".
- After much discussion, a coding-style update from Barry Song
explaining one reason why inline functions are preferred over macros.
The series is "codingstyle: avoid unused parameters for a function-like
macro".
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZkpLYQAKCRDdBJ7gKXxA
jo9NAQDctSD3TMXqxqCHLaEpCaYTYzi6TGAVHjgkqGzOt7tYjAD/ZIzgcmRwthjP
R7SSiSgZ7UnP9JRn16DQILmFeaoG1gs=
=lYhr
-----END PGP SIGNATURE-----
Merge tag 'mm-nonmm-stable-2024-05-19-11-56' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull non-mm updates from Andrew Morton:
"Mainly singleton patches, documented in their respective changelogs.
Notable series include:
- Some maintenance and performance work for ocfs2 in Heming Zhao's
series "improve write IO performance when fragmentation is high".
- Some ocfs2 bugfixes from Su Yue in the series "ocfs2 bugs fixes
exposed by fstests".
- kfifo header rework from Andy Shevchenko in the series "kfifo:
Clean up kfifo.h".
- GDB script fixes from Florian Rommel in the series "scripts/gdb:
Fixes for $lx_current and $lx_per_cpu".
- After much discussion, a coding-style update from Barry Song
explaining one reason why inline functions are preferred over
macros. The series is "codingstyle: avoid unused parameters for a
function-like macro""
* tag 'mm-nonmm-stable-2024-05-19-11-56' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (62 commits)
fs/proc: fix softlockup in __read_vmcore
nilfs2: convert BUG_ON() in nilfs_finish_roll_forward() to WARN_ON()
scripts: checkpatch: check unused parameters for function-like macro
Documentation: coding-style: ask function-like macros to evaluate parameters
nilfs2: use __field_struct() for a bitwise field
selftests/kcmp: remove unused open mode
nilfs2: remove calls to folio_set_error() and folio_clear_error()
kernel/watchdog_perf.c: tidy up kerneldoc
watchdog: allow nmi watchdog to use raw perf event
watchdog: handle comma separated nmi_watchdog command line
nilfs2: make superblock data array index computation sparse friendly
squashfs: remove calls to set the folio error flag
squashfs: convert squashfs_symlink_read_folio to use folio APIs
scripts/gdb: fix detection of current CPU in KGDB
scripts/gdb: make get_thread_info accept pointers
scripts/gdb: fix parameter handling in $lx_per_cpu
scripts/gdb: fix failing KGDB detection during probe
kfifo: don't use "proxy" headers
media: stih-cec: add missing io.h
media: rc: add missing io.h
...
- Minor update to the user_events interface
The ABI of creating a user event states that the fields
are separated by semicolons, and spaces should be ignored.
But the parsing expected at least one space to be there (which was incorrect).
Fix the reading of the string to handle fields separated by
semicolons but no space between them.
This does extend the API sightly as now "field;field" will now be
parsed and not cause an error. But it should not cause any regressions
as no logic should expect it to fail.
Note, that the logic that parses the event fields to create the
trace_event works with no spaces after the semi-colon. It is
the logic that tests against existing events that is inconsistent.
This causes registering an event without using spaces to succeed
if it doesn't exist, but makes the same call that tries to register
to the same event, but doesn't use spaces, fail.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCZkZN1hQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qvCXAQDO8b2GeCuAMa2SW7PMFdpB2Tc2F5v4
WPBEKaLb0TU+7AEAwR0rCm22p9rpke754lcpZDz7xJNcyiyMkyXeJWCauQA=
=PYwP
-----END PGP SIGNATURE-----
Merge tag 'trace-user-events-v6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing user-event updates from Steven Rostedt:
- Minor update to the user_events interface
The ABI of creating a user event states that the fields are separated
by semicolons, and spaces should be ignored.
But the parsing expected at least one space to be there (which was
incorrect). Fix the reading of the string to handle fields separated
by semicolons but no space between them.
This does extend the API sightly as now "field;field" will now be
parsed and not cause an error. But it should not cause any regressions
as no logic should expect it to fail.
Note, that the logic that parses the event fields to create the
trace_event works with no spaces after the semi-colon. It is
the logic that tests against existing events that is inconsistent.
This causes registering an event without using spaces to succeed
if it doesn't exist, but makes the same call that tries to register
to the same event, but doesn't use spaces, fail.
* tag 'trace-user-events-v6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
selftests/user_events: Add non-spacing separator check
tracing/user_events: Fix non-spaced field matching
- Add ring_buffer memory mappings
The tracing ring buffer was created based on being mostly used with the
splice system call. It is broken up into page ordered sub-buffers and the
reader swaps a new sub-buffer with an existing sub-buffer that's part
of the write buffer. It then has total access to the swapped out
sub-buffer and can do copyless movements of the memory into other mediums
(file system, network, etc).
The buffer is great for passing around the ring buffer contents in the
kernel, but is not so good for when the consumer is the user space task
itself.
A new interface is added that allows user space to memory map the ring
buffer. It will get all the write sub-buffers as well as reader sub-buffer
(that is not written to). It can send an ioctl to change which sub-buffer
is the new reader sub-buffer.
The ring buffer is read only to user space. It only needs to call the
ioctl when it is finished with a sub-buffer and needs a new sub-buffer
that the writer will not write over.
A self test program was also created for testing and can be used as
an example for the interface to user space. The libtracefs (external
to the kernel) also has code that interacts with this, although it is
disabled until the interface is in a official release. It can be enabled
by compiling the library with a special flag. This was used for testing
applications that perform better with the buffer being mapped.
Memory mapped buffers have limitations. The main one is that it can not be
used with the snapshot logic. If the buffer is mapped, snapshots will be
disabled. If any logic is set to trigger snapshots on a buffer, that
buffer will not be allowed to be mapped.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCZkYzDRQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qttNAQCj3I0OpeI1vms85ShIa7Eha2qes5uC
Yml2fnapkmRSwAEAp5UTGxtDctycWOk9B9PA7/oJmLgATaQwRKoEeTUwfAA=
=TyEB
-----END PGP SIGNATURE-----
Merge tag 'trace-ringbuffer-v6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing ring buffer updates from Steven Rostedt:
"Add ring_buffer memory mappings.
The tracing ring buffer was created based on being mostly used with
the splice system call. It is broken up into page ordered sub-buffers
and the reader swaps a new sub-buffer with an existing sub-buffer
that's part of the write buffer. It then has total access to the
swapped out sub-buffer and can do copyless movements of the memory
into other mediums (file system, network, etc).
The buffer is great for passing around the ring buffer contents in the
kernel, but is not so good for when the consumer is the user space
task itself.
A new interface is added that allows user space to memory map the ring
buffer. It will get all the write sub-buffers as well as reader
sub-buffer (that is not written to). It can send an ioctl to change
which sub-buffer is the new reader sub-buffer.
The ring buffer is read only to user space. It only needs to call the
ioctl when it is finished with a sub-buffer and needs a new sub-buffer
that the writer will not write over.
A self test program was also created for testing and can be used as an
example for the interface to user space. The libtracefs (external to
the kernel) also has code that interacts with this, although it is
disabled until the interface is in a official release. It can be
enabled by compiling the library with a special flag. This was used
for testing applications that perform better with the buffer being
mapped.
Memory mapped buffers have limitations. The main one is that it can
not be used with the snapshot logic. If the buffer is mapped,
snapshots will be disabled. If any logic is set to trigger snapshots
on a buffer, that buffer will not be allowed to be mapped"
* tag 'trace-ringbuffer-v6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
ring-buffer: Add cast to unsigned long addr passed to virt_to_page()
ring-buffer: Have mmapped ring buffer keep track of missed events
ring-buffer/selftest: Add ring-buffer mapping test
Documentation: tracing: Add ring-buffer mapping
tracing: Allow user-space mapping of the ring-buffer
ring-buffer: Introducing ring-buffer mapping functions
ring-buffer: Allocate sub-buffers with __GFP_COMP
- Removed unused ftrace_direct_funcs variables
- Fix a possible NULL pointer dereference race in eventfs
- Update do_div() usage in trace event benchmark test
- Speedup direct function registration with asynchronous RCU callback.
The synchronization was done in the registration code and this
caused delays when registering direct callbacks. Move the freeing
to a call_rcu() that will prevent delaying of the registering.
- Replace simple_strtoul() usage with kstrtoul()
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCZkYrphQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qnNbAP0TCG5dLbHlcUtXFCG3AdOufOteyJZ4
efbRjFq0QY/RvQD7Bh1BNLSBsG0ptKPC7ch377A55xsgxZTr0mEarVTOQwg=
=GKXv
-----END PGP SIGNATURE-----
Merge tag 'trace-v6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing updates from Steven Rostedt:
- Remove unused ftrace_direct_funcs variables
- Fix a possible NULL pointer dereference race in eventfs
- Update do_div() usage in trace event benchmark test
- Speedup direct function registration with asynchronous RCU callback.
The synchronization was done in the registration code and this caused
delays when registering direct callbacks. Move the freeing to a
call_rcu() that will prevent delaying of the registering.
- Replace simple_strtoul() usage with kstrtoul()
* tag 'trace-v6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
eventfs: Fix a possible null pointer dereference in eventfs_find_events()
ftrace: Fix possible use-after-free issue in ftrace_location()
ftrace: Remove unused global 'ftrace_direct_func_count'
ftrace: Remove unused list 'ftrace_direct_funcs'
tracing: Improve benchmark test performance by using do_div()
ftrace: Use asynchronous grace period for register_ftrace_direct()
ftrace: Replaces simple_strtoul in ftrace
- tracing/probes: Adding new pseudo-types %pd and %pD support for dumping
dentry name from 'struct dentry *' and file name from 'struct file *'.
- uprobes: Some performance optimizations have been done.
. Speed up the BPF uprobe event by delaying the fetching of the uprobe
event arguments that are not used in BPF.
. Avoid locking by speculatively checking whether uprobe event is valid.
. Reduce lock contention by using read/write_lock instead of spinlock for
uprobe list operation. This improved BPF uprobe benchmark result 43% on
average.
- rethook: Removes non-fatal warning messages when tracing stack from BPF
and skip rcu_is_watching() validation in rethook if possible.
- objpool: Optimizing objpool (which is used by kretprobes and fprobe as
rethook backend storage) by inlining functions and avoid caching nr_cpu_ids
because it is a const value.
- fprobe: Add entry/exit callbacks types (code cleanup)
- kprobes: Check ftrace was killed in kprobes if it uses ftrace.
-----BEGIN PGP SIGNATURE-----
iQFPBAABCgA5FiEEh7BulGwFlgAOi5DV2/sHvwUrPxsFAmZFUxsbHG1hc2FtaS5o
aXJhbWF0c3VAZ21haWwuY29tAAoJENv7B78FKz8b+fIH/A96/SeC5WRLhXmHfTCM
IvKUea2n0b0oV/2pVfHqfkCBTICuUZ97Opd9VH9jLtjBOTh0fUOGZ2DNVGdSYfWm
IIkS5dhuZxHXrSHEVYykwLHI3AOL7Q6Ny9EmOg1CNMidUkPMNtBvppsBYPlFU/B/
qQJAvOdkVOnNITCaas0+MNgepoVVKdJzdNQ1I4WrGyG8isCZBaCYKo2QcGyheCNN
y8NXvnVHgmgHQ8nTaeE5AawclFzFnhwHfPQPe1kiyGrx15b8K+VYmaZxPKv33A1a
KT3TKJ1Ep7s7iWFh2iPVJzIwOXCmSnvNTKfNx/MDuKtO7UVfFwytoMEaekbmv3bG
VqM=
=n/mW
-----END PGP SIGNATURE-----
Merge tag 'probes-v6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull probes updates from Masami Hiramatsu:
- tracing/probes: Add new pseudo-types %pd and %pD support for dumping
dentry name from 'struct dentry *' and file name from 'struct file *'
- uprobes performance optimizations:
- Speed up the BPF uprobe event by delaying the fetching of the
uprobe event arguments that are not used in BPF
- Avoid locking by speculatively checking whether uprobe event is
valid
- Reduce lock contention by using read/write_lock instead of
spinlock for uprobe list operation. This improved BPF uprobe
benchmark result 43% on average
- rethook: Remove non-fatal warning messages when tracing stack from
BPF and skip rcu_is_watching() validation in rethook if possible
- objpool: Optimize objpool (which is used by kretprobes and fprobe as
rethook backend storage) by inlining functions and avoid caching
nr_cpu_ids because it is a const value
- fprobe: Add entry/exit callbacks types (code cleanup)
- kprobes: Check ftrace was killed in kprobes if it uses ftrace
* tag 'probes-v6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
kprobe/ftrace: bail out if ftrace was killed
selftests/ftrace: Fix required features for VFS type test case
objpool: cache nr_possible_cpus() and avoid caching nr_cpu_ids
objpool: enable inlining objpool_push() and objpool_pop() operations
rethook: honor CONFIG_FTRACE_VALIDATE_RCU_IS_WATCHING in rethook_try_get()
ftrace: make extra rcu_is_watching() validation check optional
uprobes: reduce contention on uprobes_tree access
rethook: Remove warning messages printed for finding return address of a frame.
fprobe: Add entry/exit callbacks types
selftests/ftrace: add fprobe test cases for VFS type "%pd" and "%pD"
selftests/ftrace: add kprobe test cases for VFS type "%pd" and "%pD"
Documentation: tracing: add new type '%pd' and '%pD' for kprobe
tracing/probes: support '%pD' type for print struct file's name
tracing/probes: support '%pd' type for print struct dentry's name
uprobes: add speculative lockless system-wide uprobe filter check
uprobes: prepare uprobe args buffer lazily
uprobes: encapsulate preparation of uprobe args buffer
Summary
* Removed sentinel elements from ctl_table structs in kernel/*
Removing sentinels in ctl_table arrays reduces the build time size and
runtime memory consumed by ~64 bytes per array. Removals for net/, io_uring/,
mm/, ipc/ and security/ are set to go into mainline through their respective
subsystems making the next release the most likely place where the final
series that removes the check for proc_name == NULL will land. This PR adds
to removals already in arch/, drivers/ and fs/.
* Adjusted ctl_table definitions and references to allow constification
Adjustments:
- Removing unused ctl_table function arguments
- Moving non-const elements from ctl_table to ctl_table_header
- Making ctl_table pointers const in ctl_table_root structure
Making the static ctl_table structs const will increase safety by keeping the
pointers to proc_handler functions in .rodata. Though no ctl_tables where
made const in this PR, the ground work for making that possible has started
with these changes sent by Thomas Weißschuh.
Testing
* These changes went into linux-next after v6.9-rc4; giving it a good month of
testing.
-----BEGIN PGP SIGNATURE-----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=/rQW
-----END PGP SIGNATURE-----
Merge tag 'sysctl-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/sysctl/sysctl
Pull sysctl updates from Joel Granados:
- Remove sentinel elements from ctl_table structs in kernel/*
Removing sentinels in ctl_table arrays reduces the build time size
and runtime memory consumed by ~64 bytes per array. Removals for
net/, io_uring/, mm/, ipc/ and security/ are set to go into mainline
through their respective subsystems making the next release the most
likely place where the final series that removes the check for
proc_name == NULL will land.
This adds to removals already in arch/, drivers/ and fs/.
- Adjust ctl_table definitions and references to allow constification
- Remove unused ctl_table function arguments
- Move non-const elements from ctl_table to ctl_table_header
- Make ctl_table pointers const in ctl_table_root structure
Making the static ctl_table structs const will increase safety by
keeping the pointers to proc_handler functions in .rodata. Though no
ctl_tables where made const in this PR, the ground work for making
that possible has started with these changes sent by Thomas
Weißschuh.
* tag 'sysctl-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/sysctl/sysctl:
sysctl: drop now unnecessary out-of-bounds check
sysctl: move sysctl type to ctl_table_header
sysctl: drop sysctl_is_perm_empty_ctl_table
sysctl: treewide: constify argument ctl_table_root::permissions(table)
sysctl: treewide: drop unused argument ctl_table_root::set_ownership(table)
bpf: Remove the now superfluous sentinel elements from ctl_table array
delayacct: Remove the now superfluous sentinel elements from ctl_table array
kprobes: Remove the now superfluous sentinel elements from ctl_table array
printk: Remove the now superfluous sentinel elements from ctl_table array
scheduler: Remove the now superfluous sentinel elements from ctl_table array
seccomp: Remove the now superfluous sentinel elements from ctl_table array
timekeeping: Remove the now superfluous sentinel elements from ctl_table array
ftrace: Remove the now superfluous sentinel elements from ctl_table array
umh: Remove the now superfluous sentinel elements from ctl_table array
kernel misc: Remove the now superfluous sentinel elements from ctl_table array
If an error happens in ftrace, ftrace_kill() will prevent disarming
kprobes. Eventually, the ftrace_ops associated with the kprobes will be
freed, yet the kprobes will still be active, and when triggered, they
will use the freed memory, likely resulting in a page fault and panic.
This behavior can be reproduced quite easily, by creating a kprobe and
then triggering a ftrace_kill(). For simplicity, we can simulate an
ftrace error with a kernel module like [1]:
[1]: https://github.com/brenns10/kernel_stuff/tree/master/ftrace_killer
sudo perf probe --add commit_creds
sudo perf trace -e probe:commit_creds
# In another terminal
make
sudo insmod ftrace_killer.ko # calls ftrace_kill(), simulating bug
# Back to perf terminal
# ctrl-c
sudo perf probe --del commit_creds
After a short period, a page fault and panic would occur as the kprobe
continues to execute and uses the freed ftrace_ops. While ftrace_kill()
is supposed to be used only in extreme circumstances, it is invoked in
FTRACE_WARN_ON() and so there are many places where an unexpected bug
could be triggered, yet the system may continue operating, possibly
without the administrator noticing. If ftrace_kill() does not panic the
system, then we should do everything we can to continue operating,
rather than leave a ticking time bomb.
Link: https://lore.kernel.org/all/20240501162956.229427-1-stephen.s.brennan@oracle.com/
Signed-off-by: Stephen Brennan <stephen.s.brennan@oracle.com>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Acked-by: Guo Ren <guoren@kernel.org>
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Finally something fun. Mike Rapoport does some cleanup to allow us to
take out module_alloc() out of modules into a new paint shedded execmem_alloc()
and execmem_free() so to make emphasis these helpers are actually used outside
of modules. It starts with a no-functional changes API rename / placeholders
to then allow architectures to define their requirements into a new shiny
struct execmem_info with ranges, and requirements for those ranges. Archs
now can intitialize this execmem_info as the last part of mm_core_init() if
they have to diverge from the norm. Each range is a known type clearly
articulated and spelled out in enum execmem_type.
Although a lot of this is major cleanup and prep work for future enhancements an
immediate clear gain is we get to enable KPROBES without MODULES now. That is
ultimately what motiviated to pick this work up again, now with smaller goal as
concrete stepping stone.
This has been sitting on linux-next for a little less than a month, a few issues
were found already and fixed, in particular an odd mips boot issue. Arch folks
reviewed the code too. This is ready for wider exposure and testing.
-----BEGIN PGP SIGNATURE-----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=Nsg4
-----END PGP SIGNATURE-----
Merge tag 'modules-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux
Pull modules updates from Luis Chamberlain:
"Finally something fun. Mike Rapoport does some cleanup to allow us to
take out module_alloc() out of modules into a new paint shedded
execmem_alloc() and execmem_free() so to make emphasis these helpers
are actually used outside of modules.
It starts with a non-functional changes API rename / placeholders to
then allow architectures to define their requirements into a new shiny
struct execmem_info with ranges, and requirements for those ranges.
Archs now can intitialize this execmem_info as the last part of
mm_core_init() if they have to diverge from the norm. Each range is a
known type clearly articulated and spelled out in enum execmem_type.
Although a lot of this is major cleanup and prep work for future
enhancements an immediate clear gain is we get to enable KPROBES
without MODULES now. That is ultimately what motiviated to pick this
work up again, now with smaller goal as concrete stepping stone"
* tag 'modules-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux:
bpf: remove CONFIG_BPF_JIT dependency on CONFIG_MODULES of
kprobes: remove dependency on CONFIG_MODULES
powerpc: use CONFIG_EXECMEM instead of CONFIG_MODULES where appropriate
x86/ftrace: enable dynamic ftrace without CONFIG_MODULES
arch: make execmem setup available regardless of CONFIG_MODULES
powerpc: extend execmem_params for kprobes allocations
arm64: extend execmem_info for generated code allocations
riscv: extend execmem_params for generated code allocations
mm/execmem, arch: convert remaining overrides of module_alloc to execmem
mm/execmem, arch: convert simple overrides of module_alloc to execmem
mm: introduce execmem_alloc() and execmem_free()
module: make module_memory_{alloc,free} more self-contained
sparc: simplify module_alloc()
nios2: define virtual address space for modules
mips: module: rename MODULE_START to MODULES_VADDR
arm64: module: remove unneeded call to kasan_alloc_module_shadow()
kallsyms: replace deprecated strncpy with strscpy
module: allow UNUSED_KSYMS_WHITELIST to be relative against objtree.
Core & protocols
----------------
- Complete rework of garbage collection of AF_UNIX sockets.
AF_UNIX is prone to forming reference count cycles due to fd passing
functionality. New method based on Tarjan's Strongly Connected Components
algorithm should be both faster and remove a lot of workarounds
we accumulated over the years.
- Add TCP fraglist GRO support, allowing chaining multiple TCP packets
and forwarding them together. Useful for small switches / routers which
lack basic checksum offload in some scenarios (e.g. PPPoE).
- Support using SMP threads for handling packet backlog i.e. packet
processing from software interfaces and old drivers which don't
use NAPI. This helps move the processing out of the softirq jumble.
- Continue work of converting from rtnl lock to RCU protection.
Don't require rtnl lock when reading: IPv6 routing FIB, IPv6 address
labels, netdev threaded NAPI sysfs files, bonding driver's sysfs files,
MPLS devconf, IPv4 FIB rules, netns IDs, tcp metrics, TC Qdiscs,
neighbor entries, ARP entries via ioctl(SIOCGARP), a lot of the link
information available via rtnetlink.
- Small optimizations from Eric to UDP wake up handling, memory accounting,
RPS/RFS implementation, TCP packet sizing etc.
- Allow direct page recycling in the bulk API used by XDP, for +2% PPS.
- Support peek with an offset on TCP sockets.
- Add MPTCP APIs for querying last time packets were received/sent/acked,
and whether MPTCP "upgrade" succeeded on a TCP socket.
- Add intra-node communication shortcut to improve SMC performance.
- Add IPv6 (and IPv{4,6}-over-IPv{4,6}) support to the GTP protocol driver.
- Add HSR-SAN (RedBOX) mode of operation to the HSR protocol driver.
- Add reset reasons for tracing what caused a TCP reset to be sent.
- Introduce direction attribute for xfrm (IPSec) states.
State can be used either for input or output packet processing.
Things we sprinkled into general kernel code
--------------------------------------------
- Add bitmap_{read,write}(), bitmap_size(), expose BYTES_TO_BITS().
This required touch-ups and renaming of a few existing users.
- Add Endian-dependent __counted_by_{le,be} annotations.
- Make building selftests "quieter" by printing summaries like
"CC object.o" rather than full commands with all the arguments.
Netfilter
---------
- Use GFP_KERNEL to clone elements, to deal better with OOM situations
and avoid failures in the .commit step.
BPF
---
- Add eBPF JIT for ARCv2 CPUs.
- Support attaching kprobe BPF programs through kprobe_multi link in
a session mode, meaning, a BPF program is attached to both function entry
and return, the entry program can decide if the return program gets
executed and the entry program can share u64 cookie value with return
program. "Session mode" is a common use-case for tetragon and bpftrace.
- Add the ability to specify and retrieve BPF cookie for raw tracepoint
programs in order to ease migration from classic to raw tracepoints.
- Add an internal-only BPF per-CPU instruction for resolving per-CPU
memory addresses and implement support in x86, ARM64 and RISC-V JITs.
This allows inlining functions which need to access per-CPU state.
- Optimize x86 BPF JIT's emit_mov_imm64, and add support for various
atomics in bpf_arena which can be JITed as a single x86 instruction.
Support BPF arena on ARM64.
- Add a new bpf_wq API for deferring events and refactor process-context
bpf_timer code to keep common code where possible.
- Harden the BPF verifier's and/or/xor value tracking.
- Introduce crypto kfuncs to let BPF programs call kernel crypto APIs.
- Support bpf_tail_call_static() helper for BPF programs with GCC 13.
- Add bpf_preempt_{disable,enable}() kfuncs in order to allow a BPF
program to have code sections where preemption is disabled.
Driver API
----------
- Skip software TC processing completely if all installed rules are
marked as HW-only, instead of checking the HW-only flag rule by rule.
- Add support for configuring PoE (Power over Ethernet), similar to
the already existing support for PoDL (Power over Data Line) config.
- Initial bits of a queue control API, for now allowing a single queue
to be reset without disturbing packet flow to other queues.
- Common (ethtool) statistics for hardware timestamping.
Tests and tooling
-----------------
- Remove the need to create a config file to run the net forwarding tests
so that a naive "make run_tests" can exercise them.
- Define a method of writing tests which require an external endpoint
to communicate with (to send/receive data towards the test machine).
Add a few such tests.
- Create a shared code library for writing Python tests. Expose the YAML
Netlink library from tools/ to the tests for easy Netlink access.
- Move netfilter tests under net/, extend them, separate performance tests
from correctness tests, and iron out issues found by running them
"on every commit".
- Refactor BPF selftests to use common network helpers.
- Further work filling in YAML definitions of Netlink messages for:
nftables, team driver, bonding interfaces, vlan interfaces, VF info,
TC u32 mark, TC police action.
- Teach Python YAML Netlink to decode attribute policies.
- Extend the definition of the "indexed array" construct in the specs
to cover arrays of scalars rather than just nests.
- Add hyperlinks between definitions in generated Netlink docs.
Drivers
-------
- Make sure unsupported flower control flags are rejected by drivers,
and make more drivers report errors directly to the application rather
than dmesg (large number of driver changes from Asbjørn Sloth Tønnesen).
- Ethernet high-speed NICs:
- Broadcom (bnxt):
- support multiple RSS contexts and steering traffic to them
- support XDP metadata
- make page pool allocations more NUMA aware
- Intel (100G, ice, idpf):
- extract datapath code common among Intel drivers into a library
- use fewer resources in switchdev by sharing queues with the PF
- add PFCP filter support
- add Ethernet filter support
- use a spinlock instead of HW lock in PTP clock ops
- support 5 layer Tx scheduler topology
- nVidia/Mellanox:
- 800G link modes and 100G SerDes speeds
- per-queue IRQ coalescing configuration
- Marvell Octeon:
- support offloading TC packet mark action
- Ethernet NICs consumer, embedded and virtual:
- stop lying about skb->truesize in USB Ethernet drivers, it messes up
TCP memory calculations
- Google cloud vNIC:
- support changing ring size via ethtool
- support ring reset using the queue control API
- VirtIO net:
- expose flow hash from RSS to XDP
- per-queue statistics
- add selftests
- Synopsys (stmmac):
- support controllers which require an RX clock signal from the MII
bus to perform their hardware initialization
- TI:
- icssg_prueth: support ICSSG-based Ethernet on AM65x SR1.0 devices
- icssg_prueth: add SW TX / RX Coalescing based on hrtimers
- cpsw: minimal XDP support
- Renesas (ravb):
- support describing the MDIO bus
- Realtek (r8169):
- add support for RTL8168M
- Microchip Sparx5:
- matchall and flower actions mirred and redirect
- Ethernet switches:
- nVidia/Mellanox:
- improve events processing performance
- Marvell:
- add support for MV88E6250 family internal PHYs
- Microchip:
- add DCB and DSCP mapping support for KSZ switches
- vsc73xx: convert to PHYLINK
- Realtek:
- rtl8226b/rtl8221b: add C45 instances and SerDes switching
- Many driver changes related to PHYLIB and PHYLINK deprecated API cleanup.
- Ethernet PHYs:
- Add a new driver for Airoha EN8811H 2.5 Gigabit PHY.
- micrel: lan8814: add support for PPS out and external timestamp trigger
- WiFi:
- Disable Wireless Extensions (WEXT) in all Wi-Fi 7 devices drivers.
Modern devices can only be configured using nl80211.
- mac80211/cfg80211
- handle color change per link for WiFi 7 Multi-Link Operation
- Intel (iwlwifi):
- don't support puncturing in 5 GHz
- support monitor mode on passive channels
- BZ-W device support
- P2P with HE/EHT support
- re-add support for firmware API 90
- provide channel survey information for Automatic Channel Selection
- MediaTek (mt76):
- mt7921 LED control
- mt7925 EHT radiotap support
- mt7920e PCI support
- Qualcomm (ath11k):
- P2P support for QCA6390, WCN6855 and QCA2066
- support hibernation
- ieee80211-freq-limit Device Tree property support
- Qualcomm (ath12k):
- refactoring in preparation of multi-link support
- suspend and hibernation support
- ACPI support
- debugfs support, including dfs_simulate_radar support
- RealTek:
- rtw88: RTL8723CS SDIO device support
- rtw89: RTL8922AE Wi-Fi 7 PCI device support
- rtw89: complete features of new WiFi 7 chip 8922AE including
BT-coexistence and Wake-on-WLAN
- rtw89: use BIOS ACPI settings to set TX power and channels
- rtl8xxxu: enable Management Frame Protection (MFP) support
- Bluetooth:
- support for Intel BlazarI and Filmore Peak2 (BE201)
- support for MediaTek MT7921S SDIO
- initial support for Intel PCIe BT driver
- remove HCI_AMP support
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=EsC2
-----END PGP SIGNATURE-----
Merge tag 'net-next-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"Core & protocols:
- Complete rework of garbage collection of AF_UNIX sockets.
AF_UNIX is prone to forming reference count cycles due to fd
passing functionality. New method based on Tarjan's Strongly
Connected Components algorithm should be both faster and remove a
lot of workarounds we accumulated over the years.
- Add TCP fraglist GRO support, allowing chaining multiple TCP
packets and forwarding them together. Useful for small switches /
routers which lack basic checksum offload in some scenarios (e.g.
PPPoE).
- Support using SMP threads for handling packet backlog i.e. packet
processing from software interfaces and old drivers which don't use
NAPI. This helps move the processing out of the softirq jumble.
- Continue work of converting from rtnl lock to RCU protection.
Don't require rtnl lock when reading: IPv6 routing FIB, IPv6
address labels, netdev threaded NAPI sysfs files, bonding driver's
sysfs files, MPLS devconf, IPv4 FIB rules, netns IDs, tcp metrics,
TC Qdiscs, neighbor entries, ARP entries via ioctl(SIOCGARP), a lot
of the link information available via rtnetlink.
- Small optimizations from Eric to UDP wake up handling, memory
accounting, RPS/RFS implementation, TCP packet sizing etc.
- Allow direct page recycling in the bulk API used by XDP, for +2%
PPS.
- Support peek with an offset on TCP sockets.
- Add MPTCP APIs for querying last time packets were received/sent/acked
and whether MPTCP "upgrade" succeeded on a TCP socket.
- Add intra-node communication shortcut to improve SMC performance.
- Add IPv6 (and IPv{4,6}-over-IPv{4,6}) support to the GTP protocol
driver.
- Add HSR-SAN (RedBOX) mode of operation to the HSR protocol driver.
- Add reset reasons for tracing what caused a TCP reset to be sent.
- Introduce direction attribute for xfrm (IPSec) states. State can be
used either for input or output packet processing.
Things we sprinkled into general kernel code:
- Add bitmap_{read,write}(), bitmap_size(), expose BYTES_TO_BITS().
This required touch-ups and renaming of a few existing users.
- Add Endian-dependent __counted_by_{le,be} annotations.
- Make building selftests "quieter" by printing summaries like
"CC object.o" rather than full commands with all the arguments.
Netfilter:
- Use GFP_KERNEL to clone elements, to deal better with OOM
situations and avoid failures in the .commit step.
BPF:
- Add eBPF JIT for ARCv2 CPUs.
- Support attaching kprobe BPF programs through kprobe_multi link in
a session mode, meaning, a BPF program is attached to both function
entry and return, the entry program can decide if the return
program gets executed and the entry program can share u64 cookie
value with return program. "Session mode" is a common use-case for
tetragon and bpftrace.
- Add the ability to specify and retrieve BPF cookie for raw
tracepoint programs in order to ease migration from classic to raw
tracepoints.
- Add an internal-only BPF per-CPU instruction for resolving per-CPU
memory addresses and implement support in x86, ARM64 and RISC-V
JITs. This allows inlining functions which need to access per-CPU
state.
- Optimize x86 BPF JIT's emit_mov_imm64, and add support for various
atomics in bpf_arena which can be JITed as a single x86
instruction. Support BPF arena on ARM64.
- Add a new bpf_wq API for deferring events and refactor
process-context bpf_timer code to keep common code where possible.
- Harden the BPF verifier's and/or/xor value tracking.
- Introduce crypto kfuncs to let BPF programs call kernel crypto
APIs.
- Support bpf_tail_call_static() helper for BPF programs with GCC 13.
- Add bpf_preempt_{disable,enable}() kfuncs in order to allow a BPF
program to have code sections where preemption is disabled.
Driver API:
- Skip software TC processing completely if all installed rules are
marked as HW-only, instead of checking the HW-only flag rule by
rule.
- Add support for configuring PoE (Power over Ethernet), similar to
the already existing support for PoDL (Power over Data Line)
config.
- Initial bits of a queue control API, for now allowing a single
queue to be reset without disturbing packet flow to other queues.
- Common (ethtool) statistics for hardware timestamping.
Tests and tooling:
- Remove the need to create a config file to run the net forwarding
tests so that a naive "make run_tests" can exercise them.
- Define a method of writing tests which require an external endpoint
to communicate with (to send/receive data towards the test
machine). Add a few such tests.
- Create a shared code library for writing Python tests. Expose the
YAML Netlink library from tools/ to the tests for easy Netlink
access.
- Move netfilter tests under net/, extend them, separate performance
tests from correctness tests, and iron out issues found by running
them "on every commit".
- Refactor BPF selftests to use common network helpers.
- Further work filling in YAML definitions of Netlink messages for:
nftables, team driver, bonding interfaces, vlan interfaces, VF
info, TC u32 mark, TC police action.
- Teach Python YAML Netlink to decode attribute policies.
- Extend the definition of the "indexed array" construct in the specs
to cover arrays of scalars rather than just nests.
- Add hyperlinks between definitions in generated Netlink docs.
Drivers:
- Make sure unsupported flower control flags are rejected by drivers,
and make more drivers report errors directly to the application
rather than dmesg (large number of driver changes from Asbjørn
Sloth Tønnesen).
- Ethernet high-speed NICs:
- Broadcom (bnxt):
- support multiple RSS contexts and steering traffic to them
- support XDP metadata
- make page pool allocations more NUMA aware
- Intel (100G, ice, idpf):
- extract datapath code common among Intel drivers into a library
- use fewer resources in switchdev by sharing queues with the PF
- add PFCP filter support
- add Ethernet filter support
- use a spinlock instead of HW lock in PTP clock ops
- support 5 layer Tx scheduler topology
- nVidia/Mellanox:
- 800G link modes and 100G SerDes speeds
- per-queue IRQ coalescing configuration
- Marvell Octeon:
- support offloading TC packet mark action
- Ethernet NICs consumer, embedded and virtual:
- stop lying about skb->truesize in USB Ethernet drivers, it
messes up TCP memory calculations
- Google cloud vNIC:
- support changing ring size via ethtool
- support ring reset using the queue control API
- VirtIO net:
- expose flow hash from RSS to XDP
- per-queue statistics
- add selftests
- Synopsys (stmmac):
- support controllers which require an RX clock signal from the
MII bus to perform their hardware initialization
- TI:
- icssg_prueth: support ICSSG-based Ethernet on AM65x SR1.0 devices
- icssg_prueth: add SW TX / RX Coalescing based on hrtimers
- cpsw: minimal XDP support
- Renesas (ravb):
- support describing the MDIO bus
- Realtek (r8169):
- add support for RTL8168M
- Microchip Sparx5:
- matchall and flower actions mirred and redirect
- Ethernet switches:
- nVidia/Mellanox:
- improve events processing performance
- Marvell:
- add support for MV88E6250 family internal PHYs
- Microchip:
- add DCB and DSCP mapping support for KSZ switches
- vsc73xx: convert to PHYLINK
- Realtek:
- rtl8226b/rtl8221b: add C45 instances and SerDes switching
- Many driver changes related to PHYLIB and PHYLINK deprecated API
cleanup
- Ethernet PHYs:
- Add a new driver for Airoha EN8811H 2.5 Gigabit PHY.
- micrel: lan8814: add support for PPS out and external timestamp trigger
- WiFi:
- Disable Wireless Extensions (WEXT) in all Wi-Fi 7 devices
drivers. Modern devices can only be configured using nl80211.
- mac80211/cfg80211
- handle color change per link for WiFi 7 Multi-Link Operation
- Intel (iwlwifi):
- don't support puncturing in 5 GHz
- support monitor mode on passive channels
- BZ-W device support
- P2P with HE/EHT support
- re-add support for firmware API 90
- provide channel survey information for Automatic Channel Selection
- MediaTek (mt76):
- mt7921 LED control
- mt7925 EHT radiotap support
- mt7920e PCI support
- Qualcomm (ath11k):
- P2P support for QCA6390, WCN6855 and QCA2066
- support hibernation
- ieee80211-freq-limit Device Tree property support
- Qualcomm (ath12k):
- refactoring in preparation of multi-link support
- suspend and hibernation support
- ACPI support
- debugfs support, including dfs_simulate_radar support
- RealTek:
- rtw88: RTL8723CS SDIO device support
- rtw89: RTL8922AE Wi-Fi 7 PCI device support
- rtw89: complete features of new WiFi 7 chip 8922AE including
BT-coexistence and Wake-on-WLAN
- rtw89: use BIOS ACPI settings to set TX power and channels
- rtl8xxxu: enable Management Frame Protection (MFP) support
- Bluetooth:
- support for Intel BlazarI and Filmore Peak2 (BE201)
- support for MediaTek MT7921S SDIO
- initial support for Intel PCIe BT driver
- remove HCI_AMP support"
* tag 'net-next-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1827 commits)
selftests: netfilter: fix packetdrill conntrack testcase
net: gro: fix napi_gro_cb zeroed alignment
Bluetooth: btintel_pcie: Refactor and code cleanup
Bluetooth: btintel_pcie: Fix warning reported by sparse
Bluetooth: hci_core: Fix not handling hdev->le_num_of_adv_sets=1
Bluetooth: btintel: Fix compiler warning for multi_v7_defconfig config
Bluetooth: btintel_pcie: Fix compiler warnings
Bluetooth: btintel_pcie: Add *setup* function to download firmware
Bluetooth: btintel_pcie: Add support for PCIe transport
Bluetooth: btintel: Export few static functions
Bluetooth: HCI: Remove HCI_AMP support
Bluetooth: L2CAP: Fix div-by-zero in l2cap_le_flowctl_init()
Bluetooth: qca: Fix error code in qca_read_fw_build_info()
Bluetooth: hci_conn: Use __counted_by() and avoid -Wfamnae warning
Bluetooth: btintel: Add support for Filmore Peak2 (BE201)
Bluetooth: btintel: Add support for BlazarI
LE Create Connection command timeout increased to 20 secs
dt-bindings: net: bluetooth: Add MediaTek MT7921S SDIO Bluetooth
Bluetooth: compute LE flow credits based on recvbuf space
Bluetooth: hci_sync: Use cmd->num_cis instead of magic number
...
KASAN reports a bug:
BUG: KASAN: use-after-free in ftrace_location+0x90/0x120
Read of size 8 at addr ffff888141d40010 by task insmod/424
CPU: 8 PID: 424 Comm: insmod Tainted: G W 6.9.0-rc2+
[...]
Call Trace:
<TASK>
dump_stack_lvl+0x68/0xa0
print_report+0xcf/0x610
kasan_report+0xb5/0xe0
ftrace_location+0x90/0x120
register_kprobe+0x14b/0xa40
kprobe_init+0x2d/0xff0 [kprobe_example]
do_one_initcall+0x8f/0x2d0
do_init_module+0x13a/0x3c0
load_module+0x3082/0x33d0
init_module_from_file+0xd2/0x130
__x64_sys_finit_module+0x306/0x440
do_syscall_64+0x68/0x140
entry_SYSCALL_64_after_hwframe+0x71/0x79
The root cause is that, in lookup_rec(), ftrace record of some address
is being searched in ftrace pages of some module, but those ftrace pages
at the same time is being freed in ftrace_release_mod() as the
corresponding module is being deleted:
CPU1 | CPU2
register_kprobes() { | delete_module() {
check_kprobe_address_safe() { |
arch_check_ftrace_location() { |
ftrace_location() { |
lookup_rec() // USE! | ftrace_release_mod() // Free!
To fix this issue:
1. Hold rcu lock as accessing ftrace pages in ftrace_location_range();
2. Use ftrace_location_range() instead of lookup_rec() in
ftrace_location();
3. Call synchronize_rcu() before freeing any ftrace pages both in
ftrace_process_locs()/ftrace_release_mod()/ftrace_free_mem().
Link: https://lore.kernel.org/linux-trace-kernel/20240509192859.1273558-1-zhengyejian1@huawei.com
Cc: stable@vger.kernel.org
Cc: <mhiramat@kernel.org>
Cc: <mark.rutland@arm.com>
Cc: <mathieu.desnoyers@efficios.com>
Fixes: ae6aa16fdc ("kprobes: introduce ftrace based optimization")
Suggested-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Zheng Yejian <zhengyejian1@huawei.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
kprobes depended on CONFIG_MODULES because it has to allocate memory for
code.
Since code allocations are now implemented with execmem, kprobes can be
enabled in non-modular kernels.
Add #ifdef CONFIG_MODULE guards for the code dealing with kprobes inside
modules, make CONFIG_KPROBES select CONFIG_EXECMEM and drop the
dependency of CONFIG_KPROBES on CONFIG_MODULES.
Signed-off-by: Mike Rapoport (IBM) <rppt@kernel.org>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
[mcgrof: rebase in light of NEED_TASKS_RCU ]
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Commit 8788ca164e ("ftrace: Remove the legacy _ftrace_direct API")
stopped using 'ftrace_direct_funcs' (and the associated
struct ftrace_direct_func). Remove them.
Build tested only (on x86-64 with FTRACE and DYNAMIC_FTRACE
enabled)
Link: https://lore.kernel.org/linux-trace-kernel/20240504132303.67538-1-linux@treblig.org
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Partially revert commit d6cb38e108 ("tracing: Use div64_u64() instead
of do_div()") and use do_div() again to utilize its faster 64-by-32
division compared to the 64-by-64 division done by div64_u64().
Explicitly cast the divisor bm_cnt to u32 to prevent a Coccinelle
warning reported by do_div.cocci. The warning was removed with commit
d6cb38e108 ("tracing: Use div64_u64() instead of do_div()").
Using the faster 64-by-32 division and casting bm_cnt to u32 is safe
because we return early from trace_do_benchmark() if bm_cnt > UINT_MAX.
This approach is already used twice in trace_do_benchmark() when
calculating the standard deviation:
do_div(stddev, (u32)bm_cnt);
do_div(stddev, (u32)bm_cnt - 1);
Link: https://lore.kernel.org/linux-trace-kernel/20240329160229.4874-2-thorsten.blum@toblux.com
Signed-off-by: Thorsten Blum <thorsten.blum@toblux.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
While testing libtracefs on the mmapped ring buffer, the test that checks
if missed events are accounted for failed when using the mapped buffer.
This is because the mapped page does not update the missed events that
were dropped because the writer filled up the ring buffer before the
reader could catch it.
Add the missed events to the reader page/sub-buffer when the IOCTL is done
and a new reader page is acquired.
Note that all accesses to the reader_page via rb_page_commit() had to be
switched to rb_page_size(), and rb_page_size() which was just a copy of
rb_page_commit() but now it masks out the RB_MISSED bits. This is needed
as the mapped reader page is still active in the ring buffer code and
where it reads the commit field of the bpage for the size, it now must
mask it otherwise the missed bits that are now set will corrupt the size
returned.
Link: https://lore.kernel.org/linux-trace-kernel/20240312175405.12fb6726@gandalf.local.home
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Vincent Donnefort <vdonnefort@google.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTFp0I1jqZrAX+hPRXbK58LschIgwUCZkGcZAAKCRDbK58LschI
g6o6APwLsqhrM2w71VUN5ciCxu4H5VDtZp6wkdqtVbxxU4qNxQEApKgYgKt8ZLF3
Kily5c7m+S4ZXhMX21rb8JhSAz0dfQk=
=5Dk7
-----END PGP SIGNATURE-----
Merge tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Daniel Borkmann says:
====================
pull-request: bpf-next 2024-05-13
We've added 119 non-merge commits during the last 14 day(s) which contain
a total of 134 files changed, 9462 insertions(+), 4742 deletions(-).
The main changes are:
1) Add BPF JIT support for 32-bit ARCv2 processors, from Shahab Vahedi.
2) Add BPF range computation improvements to the verifier in particular
around XOR and OR operators, refactoring of checks for range computation
and relaxing MUL range computation so that src_reg can also be an unknown
scalar, from Cupertino Miranda.
3) Add support to attach kprobe BPF programs through kprobe_multi link in
a session mode, meaning, a BPF program is attached to both function entry
and return, the entry program can decide if the return program gets
executed and the entry program can share u64 cookie value with return
program. Session mode is a common use-case for tetragon and bpftrace,
from Jiri Olsa.
4) Fix a potential overflow in libbpf's ring__consume_n() and improve libbpf
as well as BPF selftest's struct_ops handling, from Andrii Nakryiko.
5) Improvements to BPF selftests in context of BPF gcc backend,
from Jose E. Marchesi & David Faust.
6) Migrate remaining BPF selftest tests from test_sock_addr.c to prog_test-
-style in order to retire the old test, run it in BPF CI and additionally
expand test coverage, from Jordan Rife.
7) Big batch for BPF selftest refactoring in order to remove duplicate code
around common network helpers, from Geliang Tang.
8) Another batch of improvements to BPF selftests to retire obsolete
bpf_tcp_helpers.h as everything is available vmlinux.h,
from Martin KaFai Lau.
9) Fix BPF map tear-down to not walk the map twice on free when both timer
and wq is used, from Benjamin Tissoires.
10) Fix BPF verifier assumptions about socket->sk that it can be non-NULL,
from Alexei Starovoitov.
11) Change BTF build scripts to using --btf_features for pahole v1.26+,
from Alan Maguire.
12) Small improvements to BPF reusing struct_size() and krealloc_array(),
from Andy Shevchenko.
13) Fix s390 JIT to emit a barrier for BPF_FETCH instructions,
from Ilya Leoshkevich.
14) Extend TCP ->cong_control() callback in order to feed in ack and
flag parameters and allow write-access to tp->snd_cwnd_stamp
from BPF program, from Miao Xu.
15) Add support for internal-only per-CPU instructions to inline
bpf_get_smp_processor_id() helper call for arm64 and riscv64 BPF JITs,
from Puranjay Mohan.
16) Follow-up to remove the redundant ethtool.h from tooling infrastructure,
from Tushar Vyavahare.
17) Extend libbpf to support "module:<function>" syntax for tracing
programs, from Viktor Malik.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (119 commits)
bpf: make list_for_each_entry portable
bpf: ignore expected GCC warning in test_global_func10.c
bpf: disable strict aliasing in test_global_func9.c
selftests/bpf: Free strdup memory in xdp_hw_metadata
selftests/bpf: Fix a few tests for GCC related warnings.
bpf: avoid gcc overflow warning in test_xdp_vlan.c
tools: remove redundant ethtool.h from tooling infra
selftests/bpf: Expand ATTACH_REJECT tests
selftests/bpf: Expand getsockname and getpeername tests
sefltests/bpf: Expand sockaddr hook deny tests
selftests/bpf: Expand sockaddr program return value tests
selftests/bpf: Retire test_sock_addr.(c|sh)
selftests/bpf: Remove redundant sendmsg test cases
selftests/bpf: Migrate ATTACH_REJECT test cases
selftests/bpf: Migrate expected_attach_type tests
selftests/bpf: Migrate wildcard destination rewrite test
selftests/bpf: Migrate sendmsg6 v4 mapped address tests
selftests/bpf: Migrate sendmsg deny test cases
selftests/bpf: Migrate WILDCARD_IP test
selftests/bpf: Handle SYSCALL_EPERM and SYSCALL_ENOTSUPP test cases
...
====================
Link: https://lore.kernel.org/r/20240513134114.17575-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When running heavy test workloads with KASAN enabled, RCU Tasks grace
periods can extend for many tens of seconds, significantly slowing
trace registration. Therefore, make the registration-side RCU Tasks
grace period be asynchronous via call_rcu_tasks().
Link: https://lore.kernel.org/linux-trace-kernel/ac05be77-2972-475b-9b57-56bef15aa00a@paulmck-laptop
Reported-by: Jakub Kicinski <kuba@kernel.org>
Reported-by: Alexei Starovoitov <ast@kernel.org>
Reported-by: Chris Mason <clm@fb.com>
Reviewed-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
The function simple_strtoul performs no error checking in scenarios
where the input value overflows the intended output variable.
This results in this function successfully returning, even when the
output does not match the input string (aka the function returns
successfully even when the result is wrong).
Or as it was mentioned [1], "...simple_strtol(), simple_strtoll(),
simple_strtoul(), and simple_strtoull() functions explicitly ignore
overflows, which may lead to unexpected results in callers."
Hence, the use of those functions is discouraged.
This patch replaces all uses of the simple_strtoul with the safer
alternatives kstrtoul and kstruint.
Callers affected:
- add_rec_by_index
- set_graph_max_depth_function
Side effects of this patch:
- Since `fgraph_max_depth` is an `unsigned int`, this patch uses
kstrtouint instead of kstrtoul to avoid any compiler warnings
that could originate from calling the latter.
- This patch ensures that the callers of kstrtou* return accordingly
when kstrtoul and kstruint fail for some reason.
In this case, both callers this patch is addressing return 0 on error.
[1] https://www.kernel.org/doc/html/latest/process/deprecated.html#simple-strtol-simple-strtoll-simple-strtoul-simple-strtoull
Link: https://lore.kernel.org/linux-trace-kernel/GV1PR10MB656333529A8D7B8AFB28D238E8B4A@GV1PR10MB6563.EURPRD10.PROD.OUTLOOK.COM
Signed-off-by: Yuran Pereira <yuran.pereira@hotmail.com>
Reviewed-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Currently, user-space extracts data from the ring-buffer via splice,
which is handy for storage or network sharing. However, due to splice
limitations, it is imposible to do real-time analysis without a copy.
A solution for that problem is to let the user-space map the ring-buffer
directly.
The mapping is exposed via the per-CPU file trace_pipe_raw. The first
element of the mapping is the meta-page. It is followed by each
subbuffer constituting the ring-buffer, ordered by their unique page ID:
* Meta-page -- include/uapi/linux/trace_mmap.h for a description
* Subbuf ID 0
* Subbuf ID 1
...
It is therefore easy to translate a subbuf ID into an offset in the
mapping:
reader_id = meta->reader->id;
reader_offset = meta->meta_page_size + reader_id * meta->subbuf_size;
When new data is available, the mapper must call a newly introduced ioctl:
TRACE_MMAP_IOCTL_GET_READER. This will update the Meta-page reader ID to
point to the next reader containing unread data.
Mapping will prevent snapshot and buffer size modifications.
Link: https://lore.kernel.org/linux-trace-kernel/20240510140435.3550353-4-vdonnefort@google.com
CC: <linux-mm@kvack.org>
Signed-off-by: Vincent Donnefort <vdonnefort@google.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
In preparation for allowing the user-space to map a ring-buffer, add
a set of mapping functions:
ring_buffer_{map,unmap}()
And controls on the ring-buffer:
ring_buffer_map_get_reader() /* swap reader and head */
Mapping the ring-buffer also involves:
A unique ID for each subbuf of the ring-buffer, currently they are
only identified through their in-kernel VA.
A meta-page, where are stored ring-buffer statistics and a
description for the current reader
The linear mapping exposes the meta-page, and each subbuf of the
ring-buffer, ordered following their unique ID, assigned during the
first mapping.
Once mapped, no subbuf can get in or out of the ring-buffer: the buffer
size will remain unmodified and the splice enabling functions will in
reality simply memcpy the data instead of swapping subbufs.
Link: https://lore.kernel.org/linux-trace-kernel/20240510140435.3550353-3-vdonnefort@google.com
CC: <linux-mm@kvack.org>
Signed-off-by: Vincent Donnefort <vdonnefort@google.com>
Acked-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
In preparation for the ring-buffer memory mapping, allocate compound
pages for the ring-buffer sub-buffers to enable us to map them to
user-space with vm_insert_pages().
Link: https://lore.kernel.org/linux-trace-kernel/20240510140435.3550353-2-vdonnefort@google.com
Acked-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Vincent Donnefort <vdonnefort@google.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
This pull request contains the following branches:
fixes.2024.04.15a: Fix a lockdep complain for lazy-preemptible kernel,
remove redundant BH disable for TINY_RCU, remove redundant READ_ONCE()
in tree.c, fix false positives KCSAN splat and fix buffer overflow in
the print_cpu_stall_info().
misc.2024.04.12a: Misc updates related to bpf, tracing and update the
MAINTAINERS file.
rcu-sync-normal-improve.2024.04.15a: An improvement of a normal
synchronize_rcu() call in terms of latency. It maintains a separate
track for sync. users only. This approach bypasses per-cpu nocb-lists
thus sync-users do not depend on nocb-list length and how fast regular
callbacks are processed.
rcu-tasks.2024.04.15a: RCU tasks, switch tasks RCU grace periods to
sleep at TASK_IDLE priority, fix some comments, add some diagnostic
warning to the exit_tasks_rcu_start() and fix a buffer overflow in
the show_rcu_tasks_trace_gp_kthread().
rcutorture.2024.04.15a: Increase memory to guest OS, fix a Tasks
Rude RCU testing, some updates for TREE09, dump mode information
to debug GP kthread state, remove redundant READ_ONCE(), fix some
comments about RCU_TORTURE_PIPE_LEN and pipe_count, remove some
redundant pointer initialization, fix a hung splat task by when
the rcutorture tests start to exit, fix invalid context warning,
add '--do-kvfree' parameter to torture test and use slow register
unregister callbacks only for rcutype test.
-----BEGIN PGP SIGNATURE-----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=cq8V
-----END PGP SIGNATURE-----
Merge tag 'rcu.next.v6.10' of https://github.com/urezki/linux
Pull RCU updates from Uladzislau Rezki:
- Fix a lockdep complain for lazy-preemptible kernel, remove redundant
BH disable for TINY_RCU, remove redundant READ_ONCE() in tree.c, fix
false positives KCSAN splat and fix buffer overflow in the
print_cpu_stall_info().
- Misc updates related to bpf, tracing and update the MAINTAINERS file.
- An improvement of a normal synchronize_rcu() call in terms of
latency. It maintains a separate track for sync. users only. This
approach bypasses per-cpu nocb-lists thus sync-users do not depend on
nocb-list length and how fast regular callbacks are processed.
- RCU tasks: switch tasks RCU grace periods to sleep at TASK_IDLE
priority, fix some comments, add some diagnostic warning to the
exit_tasks_rcu_start() and fix a buffer overflow in the
show_rcu_tasks_trace_gp_kthread().
- RCU torture: Increase memory to guest OS, fix a Tasks Rude RCU
testing, some updates for TREE09, dump mode information to debug GP
kthread state, remove redundant READ_ONCE(), fix some comments about
RCU_TORTURE_PIPE_LEN and pipe_count, remove some redundant pointer
initialization, fix a hung splat task by when the rcutorture tests
start to exit, fix invalid context warning, add '--do-kvfree'
parameter to torture test and use slow register unregister callbacks
only for rcutype test.
* tag 'rcu.next.v6.10' of https://github.com/urezki/linux: (48 commits)
rcutorture: Use rcu_gp_slow_register/unregister() only for rcutype test
torture: Scale --do-kvfree test time
rcutorture: Fix invalid context warning when enable srcu barrier testing
rcutorture: Make stall-tasks directly exit when rcutorture tests end
rcutorture: Removing redundant function pointer initialization
rcutorture: Make rcutorture support print rcu-tasks gp state
rcutorture: Use the gp_kthread_dbg operation specified by cur_ops
rcutorture: Re-use value stored to ->rtort_pipe_count instead of re-reading
rcutorture: Fix rcu_torture_one_read() pipe_count overflow comment
rcutorture: Remove extraneous rcu_torture_pipe_update_one() READ_ONCE()
rcu: Allocate WQ with WQ_MEM_RECLAIM bit set
rcu: Support direct wake-up of synchronize_rcu() users
rcu: Add a trace event for synchronize_rcu_normal()
rcu: Reduce synchronize_rcu() latency
rcu: Fix buffer overflow in print_cpu_stall_info()
rcu: Mollify sparse with RCU guard
rcu-tasks: Fix show_rcu_tasks_trace_gp_kthread buffer overflow
rcu-tasks: Fix the comments for tasks_rcu_exit_srcu_stall_timer
rcu-tasks: Replace exit_tasks_rcu_start() initialization with WARN_ON_ONCE()
rcu: Remove redundant CONFIG_PROVE_RCU #if condition
...
When the ABI was updated to prevent same name w/different args, it
missed an important corner case when fields don't end with a space.
Typically, space is used for fields to help separate them, like
"u8 field1; u8 field2". If no spaces are used, like
"u8 field1;u8 field2", then the parsing works for the first time.
However, the match check fails on a subsequent register, leading to
confusion.
This is because the match check uses argv_split() and assumes that all
fields will be split upon the space. When spaces are used, we get back
{ "u8", "field1;" }, without spaces we get back { "u8", "field1;u8" }.
This causes a mismatch, and the user program gets back -EADDRINUSE.
Add a method to detect this case before calling argv_split(). If found
force a space after the field separator character ';'. This ensures all
cases work properly for matching.
With this fix, the following are all treated as matching:
u8 field1;u8 field2
u8 field1; u8 field2
u8 field1;\tu8 field2
u8 field1;\nu8 field2
Link: https://lore.kernel.org/linux-trace-kernel/20240423162338.292-2-beaub@linux.microsoft.com
Fixes: ba470eebc2 ("tracing/user_events: Prevent same name but different args event")
Signed-off-by: Beau Belgrave <beaub@linux.microsoft.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Cross-merge networking fixes after downstream PR.
No conflicts.
Adjacent changes:
drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
35d92abfba ("net: hns3: fix kernel crash when devlink reload during initialization")
2a1a1a7b5f ("net: hns3: add command queue trace for hns3")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
- probe-events: Fix memory leak in parsing probe argument. There is a
memory leak (forget to free an allocated buffer) in a memory allocation
failure path. Fixes it to jump to the correct error handling code.
-----BEGIN PGP SIGNATURE-----
iQFPBAABCgA5FiEEh7BulGwFlgAOi5DV2/sHvwUrPxsFAmY2NRQbHG1hc2FtaS5o
aXJhbWF0c3VAZ21haWwuY29tAAoJENv7B78FKz8bIacH/RmSQaraWiwQmMaWT8Pp
wotOxtMYnl2uLNeVx3vn55+G1Xr/rJP3E9EBGTa+HMPky3trea07eBM5B3UnwT2y
Y75Nhm6z3SFaLBygdKmQZgyIJF1W9w6J1cfqPwPlfR3h08a/9rNojd/DKBo7fLjk
uwGAUHsB6sNhTvRF64wtr+I7V+8CGwNnApyQvf/mLnHsELerzm86nxDhXcfIvb1P
UbM4nupqrV3QYCLYdXmma34PFFJzS3ioINGn692QtHFOSEdSwJfqsNv6AU/w98zD
8o2rlSadc64Yl74vMLFRtBVS3K49VQXNgUUXjx2Gpj9/v80qn+B41HwaNSl1Lagx
lIY=
=tob5
-----END PGP SIGNATURE-----
Merge tag 'probes-fixes-v6.9-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull probes fix from Masami Hiramatsu:
- probe-events: Fix memory leak in parsing probe argument.
There is a memory leak (forget to free an allocated buffer) in a
memory allocation failure path. Fix it to jump to the correct error
handling code.
* tag 'probes-fixes-v6.9-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing/probes: Fix memory leak in traceprobe_parse_probe_arg_body()
Synthetic events create and destroy tracefs files when they are created
and removed. The tracing subsystem has its own file descriptor
representing the state of the events attached to the tracefs files.
There's a race between the eventfs files and this file descriptor of the
tracing system where the following can cause an issue:
With two scripts 'A' and 'B' doing:
Script 'A':
echo "hello int aaa" > /sys/kernel/tracing/synthetic_events
while :
do
echo 0 > /sys/kernel/tracing/events/synthetic/hello/enable
done
Script 'B':
echo > /sys/kernel/tracing/synthetic_events
Script 'A' creates a synthetic event "hello" and then just writes zero
into its enable file.
Script 'B' removes all synthetic events (including the newly created
"hello" event).
What happens is that the opening of the "enable" file has:
{
struct trace_event_file *file = inode->i_private;
int ret;
ret = tracing_check_open_get_tr(file->tr);
[..]
But deleting the events frees the "file" descriptor, and a "use after
free" happens with the dereference at "file->tr".
The file descriptor does have a reference counter, but there needs to be a
way to decrement it from the eventfs when the eventfs_inode is removed
that represents this file descriptor.
Add an optional "release" callback to the eventfs_entry array structure,
that gets called when the eventfs file is about to be removed. This allows
for the creating on the eventfs file to increment the tracing file
descriptor ref counter. When the eventfs file is deleted, it can call the
release function that will call the put function for the tracing file
descriptor.
This will protect the tracing file from being freed while a eventfs file
that references it is being opened.
Link: https://lore.kernel.org/linux-trace-kernel/20240426073410.17154-1-Tze-nan.Wu@mediatek.com/
Link: https://lore.kernel.org/linux-trace-kernel/20240502090315.448cba46@gandalf.local.home
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Fixes: 5790b1fb3d ("eventfs: Remove eventfs_file and just use eventfs_inode")
Reported-by: Tze-nan wu <Tze-nan.Wu@mediatek.com>
Tested-by: Tze-nan Wu (吳澤南) <Tze-nan.Wu@mediatek.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Take into account CONFIG_FTRACE_VALIDATE_RCU_IS_WATCHING when validating
that RCU is watching when trying to setup rethooko on a function entry.
One notable exception when we force rcu_is_watching() check is
CONFIG_KPROBE_EVENTS_ON_NOTRACE=y case, in which case kretprobes will use
old-style int3-based workflow instead of relying on ftrace, making RCU
watching check important to validate.
This further (in addition to improvements in the previous patch)
improves BPF multi-kretprobe (which rely on rethook) runtime throughput
by 2.3%, according to BPF benchmarks ([0]).
[0] https://lore.kernel.org/bpf/CAEf4BzauQ2WKMjZdc9s0rBWa01BYbgwHN6aNDXQSHYia47pQ-w@mail.gmail.com/
Link: https://lore.kernel.org/all/20240418190909.704286-2-andrii@kernel.org/
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Paul E. McKenney <paulmck@kernel.org>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Introduce CONFIG_FTRACE_VALIDATE_RCU_IS_WATCHING config option to
control whether ftrace low-level code performs additional
rcu_is_watching()-based validation logic in an attempt to catch noinstr
violations.
This check is expected to never be true and is mostly useful for
low-level validation of ftrace subsystem invariants. For most users it
should probably be kept disabled to eliminate unnecessary runtime
overhead.
This improves BPF multi-kretprobe (relying on ftrace and rethook
infrastructure) runtime throughput by 2%, according to BPF benchmarks ([0]).
[0] https://lore.kernel.org/bpf/CAEf4BzauQ2WKMjZdc9s0rBWa01BYbgwHN6aNDXQSHYia47pQ-w@mail.gmail.com/
Link: https://lore.kernel.org/all/20240418190909.704286-1-andrii@kernel.org/
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Paul E. McKenney <paulmck@kernel.org>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
The function rethook_find_ret_addr() prints a warning message and returns 0
when the target task is running and is not the "current" task in order to
prevent the incorrect return address, although it still may return an
incorrect address.
However, the warning message turns into noise when BPF profiling programs
call bpf_get_task_stack() on running tasks in a firm with a large number of
hosts.
The callers should be aware and willing to take the risk of receiving an
incorrect return address from a task that is currently running other than
the "current" one. A warning is not needed here as the callers are intent
on it.
Link: https://lore.kernel.org/all/20240408175140.60223-1-thinker.li@gmail.com/
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Kui-Feng Lee <thinker.li@gmail.com>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
As like '%pd' type, this patch supports print type '%pD' for print file's
name. For example "name=$arg1:%pD" casts the `$arg1` as (struct file*),
dereferences the "file.f_path.dentry.d_name.name" field and stores it to
"name" argument as a kernel string.
Here is an example:
[tracing]# echo 'p:testprobe vfs_read name=$arg1:%pD' > kprobe_event
[tracing]# echo 1 > events/kprobes/testprobe/enable
[tracing]# grep -q "1" events/kprobes/testprobe/enable
[tracing]# echo 0 > events/kprobes/testprobe/enable
[tracing]# grep "vfs_read" trace | grep "enable"
grep-15108 [003] ..... 5228.328609: testprobe: (vfs_read+0x4/0xbb0) name="enable"
Note that this expects the given argument (e.g. $arg1) is an address of struct
file. User must ensure it.
Link: https://lore.kernel.org/all/20240322064308.284457-3-yebin10@huawei.com/
[Masami: replaced "previous patch" with '%pd' type]
Signed-off-by: Ye Bin <yebin10@huawei.com>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
During fault locating, the file name needs to be printed based on the
dentry address. The offset needs to be calculated each time, which
is troublesome. Similar to printk, kprobe support print type '%pd' for
print dentry's name. For example "name=$arg1:%pd" casts the `$arg1`
as (struct dentry *), dereferences the "d_name.name" field and stores
it to "name" argument as a kernel string.
Here is an example:
[tracing]# echo 'p:testprobe dput name=$arg1:%pd' > kprobe_events
[tracing]# echo 1 > events/kprobes/testprobe/enable
[tracing]# grep -q "1" events/kprobes/testprobe/enable
[tracing]# echo 0 > events/kprobes/testprobe/enable
[tracing]# cat trace | grep "enable"
bash-14844 [002] ..... 16912.889543: testprobe: (dput+0x4/0x30) name="enable"
grep-15389 [003] ..... 16922.834182: testprobe: (dput+0x4/0x30) name="enable"
grep-15389 [003] ..... 16922.836103: testprobe: (dput+0x4/0x30) name="enable"
bash-14844 [001] ..... 16931.820909: testprobe: (dput+0x4/0x30) name="enable"
Note that this expects the given argument (e.g. $arg1) is an address of struct
dentry. User must ensure it.
Link: https://lore.kernel.org/all/20240322064308.284457-2-yebin10@huawei.com/
Signed-off-by: Ye Bin <yebin10@huawei.com>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
It's very common with BPF-based uprobe/uretprobe use cases to have
a system-wide (not PID specific) probes used. In this case uprobe's
trace_uprobe_filter->nr_systemwide counter is bumped at registration
time, and actual filtering is short circuited at the time when
uprobe/uretprobe is triggered.
This is a great optimization, and the only issue with it is that to even
get to checking this counter uprobe subsystem is taking
read-side trace_uprobe_filter->rwlock. This is actually noticeable in
profiles and is just another point of contention when uprobe is
triggered on multiple CPUs simultaneously.
This patch moves this nr_systemwide check outside of filter list's
rwlock scope, as rwlock is meant to protect list modification, while
nr_systemwide-based check is speculative and racy already, despite the
lock (as discussed in [0]). trace_uprobe_filter_remove() and
trace_uprobe_filter_add() already check for filter->nr_systewide
explicitly outside of __uprobe_perf_filter, so no modifications are
required there.
Confirming with BPF selftests's based benchmarks.
BEFORE (based on changes in previous patch)
===========================================
uprobe-nop : 2.732 ± 0.022M/s
uprobe-push : 2.621 ± 0.016M/s
uprobe-ret : 1.105 ± 0.007M/s
uretprobe-nop : 1.396 ± 0.007M/s
uretprobe-push : 1.347 ± 0.008M/s
uretprobe-ret : 0.800 ± 0.006M/s
AFTER
=====
uprobe-nop : 2.878 ± 0.017M/s (+5.5%, total +8.3%)
uprobe-push : 2.753 ± 0.013M/s (+5.3%, total +10.2%)
uprobe-ret : 1.142 ± 0.010M/s (+3.8%, total +3.8%)
uretprobe-nop : 1.444 ± 0.008M/s (+3.5%, total +6.5%)
uretprobe-push : 1.410 ± 0.010M/s (+4.8%, total +7.1%)
uretprobe-ret : 0.816 ± 0.002M/s (+2.0%, total +3.9%)
In the above, first percentage value is based on top of previous patch
(lazy uprobe buffer optimization), while the "total" percentage is
based on kernel without any of the changes in this patch set.
As can be seen, we get about 4% - 10% speed up, in total, with both lazy
uprobe buffer and speculative filter check optimizations.
[0] https://lore.kernel.org/bpf/20240313131926.GA19986@redhat.com/
Reviewed-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/all/20240318181728.2795838-4-andrii@kernel.org/
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
uprobe_cpu_buffer and corresponding logic to store uprobe args into it
are used for uprobes/uretprobes that are created through tracefs or
perf events.
BPF is yet another user of uprobe/uretprobe infrastructure, but doesn't
need uprobe_cpu_buffer and associated data. For BPF-only use cases this
buffer handling and preparation is a pure overhead. At the same time,
BPF-only uprobe/uretprobe usage is very common in practice. Also, for
a lot of cases applications are very senstivie to performance overheads,
as they might be tracing a very high frequency functions like
malloc()/free(), so every bit of performance improvement matters.
All that is to say that this uprobe_cpu_buffer preparation is an
unnecessary overhead that each BPF user of uprobes/uretprobe has to pay.
This patch is changing this by making uprobe_cpu_buffer preparation
optional. It will happen only if either tracefs-based or perf event-based
uprobe/uretprobe consumer is registered for given uprobe/uretprobe. For
BPF-only use cases this step will be skipped.
We used uprobe/uretprobe benchmark which is part of BPF selftests (see [0])
to estimate the improvements. We have 3 uprobe and 3 uretprobe
scenarios, which vary an instruction that is replaced by uprobe: nop
(fastest uprobe case), `push rbp` (typical case), and non-simulated
`ret` instruction (slowest case). Benchmark thread is constantly calling
user space function in a tight loop. User space function has attached
BPF uprobe or uretprobe program doing nothing but atomic counter
increments to count number of triggering calls. Benchmark emits
throughput in millions of executions per second.
BEFORE these changes
====================
uprobe-nop : 2.657 ± 0.024M/s
uprobe-push : 2.499 ± 0.018M/s
uprobe-ret : 1.100 ± 0.006M/s
uretprobe-nop : 1.356 ± 0.004M/s
uretprobe-push : 1.317 ± 0.019M/s
uretprobe-ret : 0.785 ± 0.007M/s
AFTER these changes
===================
uprobe-nop : 2.732 ± 0.022M/s (+2.8%)
uprobe-push : 2.621 ± 0.016M/s (+4.9%)
uprobe-ret : 1.105 ± 0.007M/s (+0.5%)
uretprobe-nop : 1.396 ± 0.007M/s (+2.9%)
uretprobe-push : 1.347 ± 0.008M/s (+2.3%)
uretprobe-ret : 0.800 ± 0.006M/s (+1.9)
So the improvements on this particular machine seems to be between 2% and 5%.
[0] https://github.com/torvalds/linux/blob/master/tools/testing/selftests/bpf/benchs/bench_trigger.c
Reviewed-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/all/20240318181728.2795838-3-andrii@kernel.org/
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Move the logic of fetching temporary per-CPU uprobe buffer and storing
uprobes args into it to a new helper function. Store data size as part
of this buffer, simplifying interfaces a bit, as now we only pass single
uprobe_cpu_buffer reference around, instead of pointer + dsize.
This logic was duplicated across uprobe_dispatcher and uretprobe_dispatcher,
and now will be centralized. All this is also in preparation to make
this uprobe_cpu_buffer handling logic optional in the next patch.
Link: https://lore.kernel.org/all/20240318181728.2795838-2-andrii@kernel.org/
[Masami: update for v6.9-rc3 kernel]
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Reviewed-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Adding support for cookie within the session of kprobe multi
entry and return program.
The session cookie is u64 value and can be retrieved be new
kfunc bpf_session_cookie, which returns pointer to the cookie
value. The bpf program can use the pointer to store (on entry)
and load (on return) the value.
The cookie value is implemented via fprobe feature that allows
to share values between entry and return ftrace fprobe callbacks.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20240430112830.1184228-4-jolsa@kernel.org
Adding struct bpf_session_run_ctx object to hold session related
data, which is atm is_return bool and data pointer coming in
following changes.
Placing bpf_session_run_ctx layer in between bpf_run_ctx and
bpf_kprobe_multi_run_ctx so the session data can be retrieved
regardless of if it's kprobe_multi or uprobe_multi link, which
support is coming in future. This way both kprobe_multi and
uprobe_multi can use same kfuncs to access the session data.
Adding bpf_session_is_return kfunc that returns true if the
bpf program is executed from the exit probe of the kprobe multi
link attached in wrapper mode. It returns false otherwise.
Adding new kprobe hook for kprobe program type.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20240430112830.1184228-3-jolsa@kernel.org
Jiri Olsa