The "err" variable is not initialized if damon_target_has_pid(ctx) is
false and sys_target->regions->nr is zero.
Link: https://lkml.kernel.org/r/739e6aaf-a634-4e33-98a8-16546379ec9f@moroto.mountain
Fixes: 0bcd216c4741 ("mm/damon/sysfs: update monitoring target regions for online input commit")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
there's little I can say which isn't in the individual changelogs.
The lengthier patch series are
- "kdump: use generic functions to simplify crashkernel reservation in
arch", from Baoquan He. This is mainly cleanups and consolidation of
the "crashkernel=" kernel parameter handling.
- After much discussion, David Laight's "minmax: Relax type checks in
min() and max()" is here. Hopefully reduces some typecasting and the
use of min_t() and max_t().
- A group of patches from Oleg Nesterov which clean up and slightly fix
our handling of reads from /proc/PID/task/... and which remove
task_struct.therad_group.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZUQP9wAKCRDdBJ7gKXxA
jmOAAQDh8sxagQYocoVsSm28ICqXFeaY9Co1jzBIDdNesAvYVwD/c2DHRqJHEiS4
63BNcG3+hM9nwGJHb5lyh5m79nBMRg0=
=On4u
-----END PGP SIGNATURE-----
Merge tag 'mm-nonmm-stable-2023-11-02-14-08' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull non-MM updates from Andrew Morton:
"As usual, lots of singleton and doubleton patches all over the tree
and there's little I can say which isn't in the individual changelogs.
The lengthier patch series are
- 'kdump: use generic functions to simplify crashkernel reservation
in arch', from Baoquan He. This is mainly cleanups and
consolidation of the 'crashkernel=' kernel parameter handling
- After much discussion, David Laight's 'minmax: Relax type checks in
min() and max()' is here. Hopefully reduces some typecasting and
the use of min_t() and max_t()
- A group of patches from Oleg Nesterov which clean up and slightly
fix our handling of reads from /proc/PID/task/... and which remove
task_struct.thread_group"
* tag 'mm-nonmm-stable-2023-11-02-14-08' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (64 commits)
scripts/gdb/vmalloc: disable on no-MMU
scripts/gdb: fix usage of MOD_TEXT not defined when CONFIG_MODULES=n
.mailmap: add address mapping for Tomeu Vizoso
mailmap: update email address for Claudiu Beznea
tools/testing/selftests/mm/run_vmtests.sh: lower the ptrace permissions
.mailmap: map Benjamin Poirier's address
scripts/gdb: add lx_current support for riscv
ocfs2: fix a spelling typo in comment
proc: test ProtectionKey in proc-empty-vm test
proc: fix proc-empty-vm test with vsyscall
fs/proc/base.c: remove unneeded semicolon
do_io_accounting: use sig->stats_lock
do_io_accounting: use __for_each_thread()
ocfs2: replace BUG_ON() at ocfs2_num_free_extents() with ocfs2_error()
ocfs2: fix a typo in a comment
scripts/show_delta: add __main__ judgement before main code
treewide: mark stuff as __ro_after_init
fs: ocfs2: check status values
proc: test /proc/${pid}/statm
compiler.h: move __is_constexpr() to compiler.h
...
When user input is committed online, DAMON sysfs interface is ignoring the
user input for the monitoring target regions. Such request is valid and
useful for fixed monitoring target regions-based monitoring ops like
'paddr' or 'fvaddr'.
Update the region boundaries as user specified, too. Note that the
monitoring results of the regions that overlap between the latest
monitoring target regions and the new target regions are preserved.
Treat empty monitoring target regions user request as a request to just
make no change to the monitoring target regions. Otherwise, users should
set the monitoring target regions same to current one for every online
input commit, and it could be challenging for dynamic monitoring target
regions update DAMON ops like 'vaddr'. If the user really need to remove
all monitoring target regions, they can simply remove the target and then
create the target again with empty target regions.
Link: https://lkml.kernel.org/r/20231031170131.46972-1-sj@kernel.org
Fixes: da87878010 ("mm/damon/sysfs: support online inputs update")
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: <stable@vger.kernel.org> [5.19+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
damon_sysfs_set_targets(), which updates the targets of the context for
online commitment, do not remove targets that removed from the
corresponding sysfs files. As a result, more than intended targets of the
context can exist and hence consume memory and monitoring CPU resource
more than expected.
Fix it by removing all targets of the context and fill up again using the
user input. This could cause unnecessary memory dealloc and realloc
operations, but this is not a hot code path. Also, note that damon_target
is stateless, and hence no data is lost.
[sj@kernel.org: fix unnecessary monitoring results removal]
Link: https://lkml.kernel.org/r/20231028213353.45397-1-sj@kernel.org
Link: https://lkml.kernel.org/r/20231022210735.46409-2-sj@kernel.org
Fixes: da87878010 ("mm/damon/sysfs: support online inputs update")
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Brendan Higgins <brendanhiggins@google.com>
Cc: <stable@vger.kernel.org> [5.19.x]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
damon_sysfs_set_targets() had a bug that can result in unexpected memory
usage and monitoring overhead increase. The bug has fixed by a previous
commit. Add a unit test for avoiding a similar bug of future.
Link: https://lkml.kernel.org/r/20231022210735.46409-3-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
When calculating the pseudo-moving access rate, DAMON divides some values
by the maximum nr_accesses. However, due to the type of the related
variables, simple division-based calculation of the divisor can return
zero. As a result, divide-by-zero is possible. Fix it by using
damon_max_nr_accesses(), which handles the case.
Note that this is a fix for a commit that not in the mainline but mm
tree.
Link: https://lkml.kernel.org/r/20231019194924.100347-6-sj@kernel.org
Fixes: ace30fb21a ("mm/damon/core: use pseudo-moving sum for nr_accesses_bp")
Reported-by: Jakub Acs <acsjakub@amazon.de>
Signed-off-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
When calculating the hotness threshold for lru_prio scheme of
DAMON_LRU_SORT, the module divides some values by the maximum nr_accesses.
However, due to the type of the related variables, simple division-based
calculation of the divisor can return zero. As a result, divide-by-zero
is possible. Fix it by using damon_max_nr_accesses(), which handles the
case.
Link: https://lkml.kernel.org/r/20231019194924.100347-5-sj@kernel.org
Fixes: 40e983cca9 ("mm/damon: introduce DAMON-based LRU-lists Sorting")
Signed-off-by: SeongJae Park <sj@kernel.org>
Reported-by: Jakub Acs <acsjakub@amazon.de>
Cc: <stable@vger.kernel.org> [6.0+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
When calculating the hotness of each region for the under-quota regions
prioritization, DAMON divides some values by the maximum nr_accesses.
However, due to the type of the related variables, simple division-based
calculation of the divisor can return zero. As a result, divide-by-zero
is possible. Fix it by using damon_max_nr_accesses(), which handles the
case.
Link: https://lkml.kernel.org/r/20231019194924.100347-4-sj@kernel.org
Fixes: 198f0f4c58 ("mm/damon/vaddr,paddr: support pageout prioritization")
Signed-off-by: SeongJae Park <sj@kernel.org>
Reported-by: Jakub Acs <acsjakub@amazon.de>
Cc: <stable@vger.kernel.org> [5.16+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
When monitoring attributes are changed, DAMON updates access rate of the
monitoring results accordingly. For that, it divides some values by the
maximum nr_accesses. However, due to the type of the related variables,
simple division-based calculation of the divisor can return zero. As a
result, divide-by-zero is possible. Fix it by using
damon_max_nr_accesses(), which handles the case.
Link: https://lkml.kernel.org/r/20231019194924.100347-3-sj@kernel.org
Fixes: 2f5bef5a59 ("mm/damon/core: update monitoring results for new monitoring attributes")
Signed-off-by: SeongJae Park <sj@kernel.org>
Reported-by: Jakub Acs <acsjakub@amazon.de>
Cc: <stable@vger.kernel.org> [6.3+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
DAMON_SYSFS assumes all schemes will be applied for at least one DAMON
monitoring results snapshot within one aggregation interval, or makes no
sense to wait for it while DAMON is deactivated by the watermarks. That
for deactivated status still makes sense, but the aggregation interval
based assumption is invalid now because each scheme can has its own apply
interval. For schemes having larger than the aggregation or watermarks
check interval, DAMOS tried regions update request can be finished without
the update. Avoid the case by explicitly checking the status of the
schemes tried regions update and watermarks based DAMON deactivation.
Link: https://lkml.kernel.org/r/20231012192256.33556-3-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "mm/damon/sysfs-schemes: Do DAMOS tried regions update for
only one apply interval".
DAMOS tried regions update feature of DAMON sysfs interface is doing the
update for one aggregation interval after the request is made. Since the
per-scheme apply interval is supported, that behavior makes no much sense.
That is, the tried regions directory will have regions from multiple
DAMON monitoring results snapshots, or no region for apply intervals that
much shorter than, or longer than the aggregation interval, respectively.
Update the behavior to update the regions for each scheme for only its
apply interval, and update the document.
Since DAMOS apply interval is the aggregation by default, this change
makes no visible behavioral difference to old users who don't explicitly
set the apply intervals.
Patches Sequence
----------------
The first two patches makes schemes of apply intervals that much shorter
or longer than the aggregation interval to keep the maximum and minimum
times for continuing the update. After the two patches, the update aligns
with the each scheme's apply interval.
Finally, the third patch updates the document to reflect the behavior.
This patch (of 3):
DAMON_SYSFS exposes every DAMON-found region that eligible for applying
the scheme action for one aggregation interval. However, each DAMON-based
operation scheme has its own apply interval. Hence, for a scheme that
having its apply interval much smaller than the aggregation interval,
DAMON_SYSFS will expose the scheme regions that applied to more than one
DAMON monitoring results snapshots. Since the purpose of DAMON tried
regions is exposing single snapshot, this makes no much sense. Track
progress of each scheme's tried regions update and avoid the case.
Link: https://lkml.kernel.org/r/20231012192256.33556-1-sj@kernel.org
Link: https://lkml.kernel.org/r/20231012192256.33556-2-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
DAMON_SYSFS can receive DAMOS tried regions update request while kdamond
is already out of the main loop and before_terminate callback
(damon_sysfs_before_terminate() in this case) is not yet called. And
damon_sysfs_handle_cmd() can further be finished before the callback is
invoked. Then, damon_sysfs_before_terminate() unlocks damon_sysfs_lock,
which is not locked by anyone. This happens because the callback function
assumes damon_sysfs_cmd_request_callback() should be called before it.
Check if the assumption was true before doing the unlock, to avoid this
problem.
Link: https://lkml.kernel.org/r/20231007200432.3110-1-sj@kernel.org
Fixes: f1d13cacab ("mm/damon/sysfs: implement DAMOS tried regions update command")
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: <stable@vger.kernel.org> [6.2.x]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
si_meminfo() will read and assign more info not just free/ram pages. For
just DAMOS_WMARK_FREE_MEM_RATE use, only get free and ram pages is ok to
save cpu.
Link: https://lkml.kernel.org/r/20230920015727.4482-1-link@vivo.com
Signed-off-by: Huan Yang <link@vivo.com>
Reviewed-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Add a kthread_stop_put() helper that stops a thread and puts its task
struct. Use it to replace the various instances of kthread_stop()
followed by put_task_struct().
Remove the kthread_stop_put() macro in usbip that is similar but doesn't
return the result of kthread_stop().
[agruenba@redhat.com: fix kerneldoc comment]
Link: https://lkml.kernel.org/r/20230911111730.2565537-1-agruenba@redhat.com
[akpm@linux-foundation.org: document kthread_stop_put()'s argument]
Link: https://lkml.kernel.org/r/20230907234048.2499820-1-agruenba@redhat.com
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Update DAMON sysfs interface to support DAMOS apply intervals by adding a
new file, 'apply_interval_us' in each scheme directory. Users can set and
get the interval for each scheme in microseconds by writing to and reading
from the file.
Link: https://lkml.kernel.org/r/20230916020945.47296-7-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
DAMON-based operation schemes are applied for every aggregation interval.
That was mainly because schemes were using nr_accesses, which be complete
to be used for every aggregation interval. However, the schemes are now
using nr_accesses_bp, which is updated for each sampling interval in a way
that reasonable to be used. Therefore, there is no reason to apply
schemes for each aggregation interval.
The unnecessary alignment with aggregation interval was also making some
use cases of DAMOS tricky. Quotas setting under long aggregation interval
is one such example. Suppose the aggregation interval is ten seconds, and
there is a scheme having CPU quota 100ms per 1s. The scheme will actually
uses 100ms per ten seconds, since it cannobe be applied before next
aggregation interval. The feature is working as intended, but the results
might not that intuitive for some users. This could be fixed by updating
the quota to 1s per 10s. But, in the case, the CPU usage of DAMOS could
look like spikes, and would actually make a bad effect to other
CPU-sensitive workloads.
Implement a dedicated timing interval for each DAMON-based operation
scheme, namely apply_interval. The interval will be sampling interval
aligned, and each scheme will be applied for its apply_interval. The
interval is set to 0 by default, and it means the scheme should use the
aggregation interval instead. This avoids old users getting any
behavioral difference.
Link: https://lkml.kernel.org/r/20230916020945.47296-5-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
DAMON sysfs interface exposes access rate of each region via DAMOS tried
regions directory. For this, the nr_accesses field of the region is used.
DAMOS was actually using nr_accesses in the past, but it uses
nr_accesses_bp now. Use the value that it is really using as the source.
Note that this doesn't expose nr_accesses_bp as is (in basis point), but
after converting it to the natural number by dividing the value by 10,000.
Hence there is no behavioral change from users' perspective.
Link: https://lkml.kernel.org/r/20230916020945.47296-3-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "mm/damon: implement DAMOS apply intervals".
DAMON-based operation schemes are applied for every aggregation interval.
That is mainly because schemes are using nr_accesses, which be complete to
be used for every aggregation interval.
This makes some DAMOS use cases be tricky. Quota setting under long
aggregation interval is one such example. Suppose the aggregation
interval is ten seconds, and there is a scheme having CPU quota 100ms per
1s. The scheme will actually uses 100ms per ten seconds, since it cannobe
be applied before next aggregation interval. The feature is working as
intended, but the results might not that intuitive for some users. This
could be fixed by updating the quota to 1s per 10s. But, in the case, the
CPU usage of DAMOS could look like spikes, and actually make a bad effect
to other CPU-sensitive workloads.
Also, with such huge aggregation interval, users may want schemes to be
applied more frequently.
DAMON provides nr_accesses_bp, which is updated for each sampling interval
in a way that reasonable to be used. By using that instead of
nr_accesses, DAMOS can have its own time interval and mitigate abovely
mentioned issues.
This patchset makes DAMOS schemes to use nr_accesses_bp instead of
nr_accesses, and have their own timing intervals. Also update DAMOS tried
regions sysfs files and DAMOS before_apply tracepoint to use the new data
as their source. Note that the interval is zero by default, and it is
interpreted to use the aggregation interval instead. This avoids making
user-visible behavioral changes.
Patches Seuqeunce
-----------------
The first patch (patch 1/9) makes DAMOS uses nr_accesses_bp instead of
nr_accesses, and following two patches (patches 2/9 and 3/9) updates DAMON
sysfs interface for DAMOS tried regions and the DAMOS before_apply
tracespoint to use nr_accesses_bp instead of nr_accesses, respectively.
The following two patches (patches 4/9 and 5/9) implements the
scheme-specific apply interval for DAMON kernel API users and update the
design document for the new feature.
Finally, the following four patches (patches 6/9, 7/9, 8/9 and 9/9) add
support of the feature in DAMON sysfs interface, add a simple selftest
test case, and document the new file on the usage and the ABI documents,
repsectively.
This patch (of 9):
DAMON provides nr_accesses_bp, which becomes same to nr_accesses * 10000
for every aggregation interval, but updated every sampling interval with a
reasonable accuracy. Since DAMON-based operation schemes are applied in
every aggregation interval using nr_accesses, using nr_accesses_bp instead
will make no difference to users. Meanwhile, it allows DAMOS to apply the
schemes in a time interval that less than the aggregation interval. It
could be useful and more flexible for some cases. Do it.
Link: https://lkml.kernel.org/r/20230916020945.47296-1-sj@kernel.org
Link: https://lkml.kernel.org/r/20230916020945.47296-2-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The function is used by only mm/damon/core.c. Mark it as a static
function.
Link: https://lkml.kernel.org/r/20230915025251.72816-9-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
damon_merge_regions_of(), which is called for each aggregation interval,
updates nr_accesses_bp to nr_accesses * 10000. However, nr_accesses_bp is
updated for each sampling interval via damon_moving_sum() using the
aggregation interval as the moving time window. And by the definition of
the algorithm, the value becomes same to discrete-window based sum for
each time window-aligned time. Hence, nr_accesses_bp will be same to
nr_accesses * 10000 for each aggregation interval without explicit update.
Remove the unnecessary update of nr_accesses_bp in
damon_merge_regions_of().
Link: https://lkml.kernel.org/r/20230915025251.72816-8-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Let nr_accesses_bp be calculated as a pseudo-moving sum that updated for
every sampling interval, using damon_moving_sum(). This is assumed to be
useful for cases that the aggregation interval is set quite huge, but the
monivoting results need to be collected earlier than next aggregation
interval is passed.
Link: https://lkml.kernel.org/r/20230915025251.72816-7-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Add yet another representation of the access rate of each region, namely
nr_accesses_bp. It is just same to the nr_accesses but represents the
value in basis point (1 in 10,000), and updated at once in every
aggregation interval. That is, moving_accesses_bp is just nr_accesses *
10000. This may seems useless at the moment. However, it will be useful
for representing less than one nr_accesses value that will be needed to
make moving sum-based nr_accesses.
Link: https://lkml.kernel.org/r/20230915025251.72816-6-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Add a simple unit test for the pseudo moving-sum function
(damon_moving_sum()).
Link: https://lkml.kernel.org/r/20230915025251.72816-5-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
For values that continuously change, moving average or sum are good ways
to provide fast updates while handling temporal and errorneous variability
of the value. For example, the access rate counter (nr_accesses) is
calculated as a sum of the number of positive sampled access check results
that collected during a discrete time window (aggregation interval), and
hence it handles temporal and errorneous access check results, but
provides the update only for every aggregation interval. Using a moving
sum method for that could allow providing the value for every sampling
interval. That could be useful for getting monitoring results snapshot or
running DAMOS in fine-grained timing.
However, supporting the moving sum for cases that number of samples in the
time window is arbirary could impose high overhead, since the number of
past values that it needs to keep could be too high. The nr_accesses
would also be one of the cases. To mitigate the overhead, implement a
pseudo-moving sum function that only provides an estimated pseudo-moving
sum. It assumes there was no error in last discrete time window and
subtract constant portion of last discrete time window sum.
Note that the function is not strictly implementing the moving sum, but it
keeps a property of moving sum, which makes the value same to the
dsicrete-window based sum for each time window-aligned timing. Hence,
people collecting the value in the old timings would show no difference.
Link: https://lkml.kernel.org/r/20230915025251.72816-4-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
When getting mm_struct of the monitoring target process fails, there wil
be no need to increase the access rate counter (nr_accesses) of the
regions for the process. Hence, damon_va_check_accesses() skips calling
damon_update_region_access_rate() in the case. This breaks the assumption
that damon_update_region_access_rate() is called for every region, for
every sampling interval. Call the function for every region even in the
case. This might increase the overhead in some cases, but such case would
not be frequent, so no significant impact is really expected.
Link: https://lkml.kernel.org/r/20230915025251.72816-3-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "mm/damon: provide pseudo-moving sum based access rate".
DAMON checks the access to each region for every sampling interval,
increase the access rate counter of the region, namely nr_accesses, if the
access was made. For every aggregation interval, the counter is reset.
The counter is exposed to users to be used as a metric showing the
relative access rate (frequency) of each region. In other words, DAMON
provides access rate of each region in every aggregation interval. The
aggregation avoids temporal access pattern changes making things
confusing. However, this also makes a few DAMON-related operations to
unnecessarily need to be aligned to the aggregation interval. This can
restrict the flexibility of DAMON applications, especially when the
aggregation interval is huge.
To provide the monitoring results in finer-grained timing while keeping
handling of temporal access pattern change, this patchset implements a
pseudo-moving sum based access rate metric. It is pseudo-moving sum
because strict moving sum implementation would need to keep all values for
last time window, and that could incur high overhead of there could be
arbitrary number of values in a time window. Especially in case of the
nr_accesses, since the sampling interval and aggregation interval can
arbitrarily set and the past values should be maintained for every region,
it could be risky. The pseudo-moving sum assumes there were no temporal
access pattern change in last discrete time window to remove the needs for
keeping the list of the last time window values. As a result, it beocmes
not strict moving sum implementation, but provides a reasonable accuracy.
Also, it keeps an important property of the moving sum. That is, the
moving sum becomes same to discrete-window based sum at the time that
aligns to the time window. This means using the pseudo moving sum based
nr_accesses makes no change to users who shows the value for every
aggregation interval.
Patches Sequence
----------------
The sequence of the patches is as follows. The first four patches are for
preparation of the change. The first two (patches 1 and 2) implements a
helper function for nr_accesses update and eliminate corner case that
skips use of the function, respectively. Following two (patches 3 and 4)
respectively implement the pseudo-moving sum function and its simple unit
test case.
Two patches for making DAMON to use the pseudo-moving sum follow. The
fifthe one (patch 5) introduces a new field for representing the
pseudo-moving sum-based access rate of each region, and the sixth one
makes the new representation to actually updated with the pseudo-moving
sum function.
Last two patches (patches 7 and 8) makes followup fixes for skipping
unnecessary updates and marking the moving sum function as static,
respectively.
This patch (of 8):
Each DAMON operarions set is updating nr_accesses field of each
damon_region for each of their access check results, from the
check_accesses() callback. Directly accessing the field could make things
complex to manage and change in future. Define and use a dedicated
function for the purpose.
Link: https://lkml.kernel.org/r/20230915025251.72816-1-sj@kernel.org
Link: https://lkml.kernel.org/r/20230915025251.72816-2-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
DAMON sleeps for sampling interval after each sampling, and check if the
aggregation interval and the ops update interval have passed using
ktime_get_coarse_ts64() and baseline timestamps for the intervals. That
design is for making the operations occur at deterministic timing
regardless of the time that spend for each work. However, it turned out
it is not that useful, and incur not-that-intuitive results.
After all, timer functions, and especially sleep functions that DAMON uses
to wait for specific timing, are not necessarily strictly accurate. It is
legal design, so no problem. However, depending on such inaccuracies, the
nr_accesses can be larger than aggregation interval divided by sampling
interval. For example, with the default setting (5 ms sampling interval
and 100 ms aggregation interval) we frequently show regions having
nr_accesses larger than 20. Also, if the execution of a DAMOS scheme
takes a long time, next aggregation could happen before enough number of
samples are collected. This is not what usual users would intuitively
expect.
Since access check sampling is the smallest unit work of DAMON, using the
number of passed sampling intervals as the DAMON-internal timer can easily
avoid these problems. That is, convert aggregation and ops update
intervals to numbers of sampling intervals that need to be passed before
those operations be executed, count the number of passed sampling
intervals, and invoke the operations as soon as the specific amount of
sampling intervals passed. Make the change.
Note that this could make a behavioral change to settings that using
intervals that not aligned by the sampling interval. For example, if the
sampling interval is 5 ms and the aggregation interval is 12 ms, DAMON
effectively uses 15 ms as its aggregation interval, because it checks
whether the aggregation interval after sleeping the sampling interval.
This change will make DAMON to effectively use 10 ms as aggregation
interval, since it uses 'aggregation interval / sampling interval *
sampling interval' as the effective aggregation interval, and we don't use
floating point types. Usual users would have used aligned intervals, so
this behavioral change is not expected to make any meaningful impact, so
just make this change.
Link: https://lkml.kernel.org/r/20230914021523.60649-1-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "mm/damon: add a tracepoint for damos apply target regions",
v2.
DAMON provides damon_aggregated tracepoint to let users record full
monitoring results. Sometimes, users need to record monitoring results of
specific pattern. DAMOS tried regions directory of DAMON sysfs interface
allows it, but the interface is mainly designed for snapshots and
therefore would be inefficient for such recording. Implement yet another
tracepoint for efficient support of the usecase.
This patch (of 2):
DAMON provides damon_aggregated tracepoint, which exposes details of each
region and its access monitoring results. It is useful for getting whole
monitoring results, e.g., for recording purposes.
For investigations of DAMOS, DAMON Sysfs interface provides DAMOS
statistics and tried_regions directory. But, those provides only
statistics and snapshots. If the scheme is frequently applied and if the
user needs to know every detail of DAMOS behavior, the snapshot-based
interface could be insufficient and expensive.
As a last resort, userspace users need to record the all monitoring
results via damon_aggregated tracepoint and simulate how DAMOS would
worked. It is unnecessarily complicated. DAMON kernel API users,
meanwhile, can do that easily via before_damos_apply() callback field of
'struct damon_callback', though.
Add a tracepoint that will be called just after before_damos_apply()
callback for more convenient investigations of DAMOS. The tracepoint
exposes all details about each regions, similar to damon_aggregated
tracepoint.
Please note that DAMOS is currently not only for memory management but
also for query-like efficient monitoring results retrievals (when 'stat'
action is used). Until now, only statistics or snapshots were supported.
Addition of this tracepoint allows efficient full recording of DAMOS-based
filtered monitoring results.
Link: https://lkml.kernel.org/r/20230913022050.2109-1-sj@kernel.org
Link: https://lkml.kernel.org/r/20230913022050.2109-2-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org> [tracing]
Cc: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
damon_aggregateed tracepoint is receiving 'struct target *', but doesn't
use it. Remove it from the prototype.
Link: https://lkml.kernel.org/r/20230907022929.91361-12-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The comment on damon_set_attrs() says it should not be called while the
kdamond is running, but now some DAMON modules like sysfs interface and
DAMON_RECLAIM call it from after_aggregation() and/or
after_wmarks_check() callbacks for online tuning. Update the comment.
Link: https://lkml.kernel.org/r/20230907022929.91361-9-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "Fix set_huge_pte_at() panic on arm64", v2.
This series fixes a bug in arm64's implementation of set_huge_pte_at(),
which can result in an unprivileged user causing a kernel panic. The
problem was triggered when running the new uffd poison mm selftest for
HUGETLB memory. This test (and the uffd poison feature) was merged for
v6.5-rc7.
Ideally, I'd like to get this fix in for v6.6 and I've cc'ed stable
(correctly this time) to get it backported to v6.5, where the issue first
showed up.
Description of Bug
==================
arm64's huge pte implementation supports multiple huge page sizes, some of
which are implemented in the page table with multiple contiguous entries.
So set_huge_pte_at() needs to work out how big the logical pte is, so that
it can also work out how many physical ptes (or pmds) need to be written.
It previously did this by grabbing the folio out of the pte and querying
its size.
However, there are cases when the pte being set is actually a swap entry.
But this also used to work fine, because for huge ptes, we only ever saw
migration entries and hwpoison entries. And both of these types of swap
entries have a PFN embedded, so the code would grab that and everything
still worked out.
But over time, more calls to set_huge_pte_at() have been added that set
swap entry types that do not embed a PFN. And this causes the code to go
bang. The triggering case is for the uffd poison test, commit
99aa77215a ("selftests/mm: add uffd unit test for UFFDIO_POISON"), which
causes a PTE_MARKER_POISONED swap entry to be set, coutesey of commit
8a13897fb0 ("mm: userfaultfd: support UFFDIO_POISON for hugetlbfs") -
added in v6.5-rc7. Although review shows that there are other call sites
that set PTE_MARKER_UFFD_WP (which also has no PFN), these don't trigger
on arm64 because arm64 doesn't support UFFD WP.
If CONFIG_DEBUG_VM is enabled, we do at least get a BUG(), but otherwise,
it will dereference a bad pointer in page_folio():
static inline struct folio *hugetlb_swap_entry_to_folio(swp_entry_t entry)
{
VM_BUG_ON(!is_migration_entry(entry) && !is_hwpoison_entry(entry));
return page_folio(pfn_to_page(swp_offset_pfn(entry)));
}
Fix
===
The simplest fix would have been to revert the dodgy cleanup commit
18f3962953 ("mm: hugetlb: kill set_huge_swap_pte_at()"), but since
things have moved on, this would have required an audit of all the new
set_huge_pte_at() call sites to see if they should be converted to
set_huge_swap_pte_at(). As per the original intent of the change, it
would also leave us open to future bugs when people invariably get it
wrong and call the wrong helper.
So instead, I've added a huge page size parameter to set_huge_pte_at().
This means that the arm64 code has the size in all cases. It's a bigger
change, due to needing to touch the arches that implement the function,
but it is entirely mechanical, so in my view, low risk.
I've compile-tested all touched arches; arm64, parisc, powerpc, riscv,
s390, sparc (and additionally x86_64). I've additionally booted and run
mm selftests against arm64, where I observe the uffd poison test is fixed,
and there are no other regressions.
This patch (of 2):
In order to fix a bug, arm64 needs to be told the size of the huge page
for which the pte is being set in set_huge_pte_at(). Provide for this by
adding an `unsigned long sz` parameter to the function. This follows the
same pattern as huge_pte_clear().
This commit makes the required interface modifications to the core mm as
well as all arches that implement this function (arm64, parisc, powerpc,
riscv, s390, sparc). The actual arm64 bug will be fixed in a separate
commit.
No behavioral changes intended.
Link: https://lkml.kernel.org/r/20230922115804.2043771-1-ryan.roberts@arm.com
Link: https://lkml.kernel.org/r/20230922115804.2043771-2-ryan.roberts@arm.com
Fixes: 8a13897fb0 ("mm: userfaultfd: support UFFDIO_POISON for hugetlbfs")
Signed-off-by: Ryan Roberts <ryan.roberts@arm.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu> [powerpc 8xx]
Reviewed-by: Lorenzo Stoakes <lstoakes@gmail.com> [vmalloc change]
Cc: Alexandre Ghiti <alex@ghiti.fr>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christian Borntraeger <borntraeger@linux.ibm.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: David S. Miller <davem@davemloft.net>
Cc: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Helge Deller <deller@gmx.de>
Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Qi Zheng <zhengqi.arch@bytedance.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: SeongJae Park <sj@kernel.org>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Uladzislau Rezki (Sony) <urezki@gmail.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Will Deacon <will@kernel.org>
Cc: <stable@vger.kernel.org> [6.5+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Extend DAMON sysfs interface to support the DAMON monitoring target based
DAMOS filter. Users can use it via writing 'target' to the filter's
'type' file and specifying the index of the target from the corresponding
DAMON context's monitoring targets list to 'target_idx' sysfs file.
Link: https://lkml.kernel.org/r/20230802214312.110532-10-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Brendan Higgins <brendanhiggins@google.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
One DAMON context can have multiple monitoring targets, and DAMOS schemes
are applied to all targets. In some cases, users need to apply different
scheme to different targets. Retrieving monitoring results via DAMON
sysfs interface' 'tried_regions' directory could be one good example.
Also, there could be cases that cgroup DAMOS filter is not enough. All
such use cases can be worked around by having multiple DAMON contexts
having only single target, but it is inefficient in terms of resource
usage, thogh the overhead is not estimated to be huge.
Implement DAMON monitoring target based DAMOS filter for the case. Like
address range target DAMOS filter, handle these filters in the DAMON core
layer, since it is more efficient than doing in operations set layer.
This also means that regions that filtered out by monitoring target type
DAMOS filters are counted as not tried by the scheme. Hence, target
granularity monitoring results retrieval via DAMON sysfs interface becomes
available.
Link: https://lkml.kernel.org/r/20230802214312.110532-9-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Brendan Higgins <brendanhiggins@google.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Implement a kunit test for the core of address range DAMOS filter
handling, namely __damos_filter_out(). The test especially focus on
regions that overlap with given filter's target address range.
Link: https://lkml.kernel.org/r/20230802214312.110532-4-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Brendan Higgins <brendanhiggins@google.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Extend DAMON sysfs interface to support address range based DAMOS filters,
by adding a special keyword for the filter/<N>/type file, namely 'addr',
and two files under filter/<N>/ for specifying the start and the end
addresses of the range, namely 'addr_start' and 'addr_end'.
Link: https://lkml.kernel.org/r/20230802214312.110532-3-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Brendan Higgins <brendanhiggins@google.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "Extend DAMOS filters for address ranges and DAMON monitoring
targets"
There are use cases that need to apply DAMOS schemes to specific address
ranges or DAMON monitoring targets. NUMA nodes in the physical address
space, special memory objects in the virtual address space, and monitoring
target specific efficient monitoring results snapshot retrieval could be
examples of such use cases. This patchset extends DAMOS filters feature
for such cases, by implementing two more filter types, namely address
ranges and DAMON monitoring types.
Patches sequence
----------------
The first seven patches are for the address ranges based DAMOS filter.
The first patch implements the filter feature and expose it via DAMON
kernel API. The second patch further expose the feature to users via
DAMON sysfs interface. The third and fourth patches implement unit tests
and selftests for the feature. Three patches (fifth to seventh) updating
the documents follow.
The following six patches are for the DAMON monitoring target based DAMOS
filter. The eighth patch implements the feature in the core layer and
expose it via DAMON's kernel API. The ninth patch further expose it to
users via DAMON sysfs interface. Tenth patch add a selftest, and two
patches (eleventh and twelfth) update documents.
[1] https://lore.kernel.org/damon/20230728203444.70703-1-sj@kernel.org/
This patch (of 13):
Users can know special characteristic of specific address ranges. NUMA
nodes or special objects or buffers in virtual address space could be such
examples. For such cases, DAMOS schemes could required to be applied to
only specific address ranges. Implement yet another type of DAMOS filter
for the purpose.
Note that the existing filter types, namely anon pages and memcg DAMOS
filters needed page level type check. Because such check can be done
efficiently in the opertions set layer, those filters are handled in
operations set layer. Specifically, only paddr operations set
implementation supports these filters. Also, because statistics counting
is done in the DAMON core layer, the regions that filtered out by these
filters are counted as tried but failed to the statistics.
Unlike those, address range based filters can efficiently handled in the
core layer. Hence, do the handling in the layer, and count the regions
that filtered out by those as the scheme has not tried for the region.
This difference should clearly documented.
Link: https://lkml.kernel.org/r/20230802214312.110532-1-sj@kernel.org
Link: https://lkml.kernel.org/r/20230802214312.110532-2-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Brendan Higgins <brendanhiggins@google.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Using tried_regions/total_bytes file, users can efficiently retrieve the
total size of memory regions having specific access pattern. However,
DAMON sysfs interface in kernel still populates all the infomration on the
tried_regions subdirectories. That means the kernel part overhead for the
construction of tried regions directories still exists. To remove the
overhead, implement yet another command input for 'state' DAMON sysfs
file. Writing the input to the file makes DAMON sysfs interface to update
only the total_bytes file.
Link: https://lkml.kernel.org/r/20230802213222.109841-3-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "mm/damon/sysfs-schemes: implement DAMOS tried total bytes
file".
The tried_regions directory of DAMON sysfs interface is useful for
retrieving monitoring results snapshot or DAMOS debugging. However, for
common use case that need to monitor only the total size of the scheme
tried regions (e.g., monitoring working set size), the kernel overhead for
directory construction and user overhead for reading the content could be
high if the number of monitoring region is not small. This patchset
implements DAMON sysfs files for efficient support of the use case.
The first patch implements the sysfs file to reduce the user space
overhead, and the second patch implements a command for reducing the
kernel space overhead.
The third patch adds a selftest for the new file, and following two
patches update documents.
[1] https://lore.kernel.org/damon/20230728201817.70602-1-sj@kernel.org/
This patch (of 5):
The tried_regions directory can be used for retrieving the monitoring
results snapshot for regions of specific access pattern, by setting the
scheme's action as 'stat' and the access pattern as required. While the
interface provides every detail of the monitoring results, some use cases
including working set size monitoring requires only the total size of the
regions. For such cases, users should read all the information and
calculate the total size of the regions. However, it could incur high
overhead if the number of regions is high. Add a file for retrieving only
the information, namely 'total_bytes' file. It allows users to get the
total size by reading only the file.
Link: https://lkml.kernel.org/r/20230802213222.109841-1-sj@kernel.org
Link: https://lkml.kernel.org/r/20230802213222.109841-2-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
damos_new_filter() was having a bug that not initializing ->list field of
the returning damos_filter struct, which results in access to
uninitialized memory. Add a unit test for the function.
Link: https://lkml.kernel.org/r/20230729203733.38949-3-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
As ptep_get, Use the pmdp_get wrapper when we accessing pmdval instead of
directly dereferencing pmd.
Link: https://lkml.kernel.org/r/20230727212157.2985025-1-ppbuk5246@gmail.com
Signed-off-by: Levi Yun <ppbuk5246@gmail.com>
Reviewed-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
walk_page_range() and friends often operate under write-locked mmap_lock.
With introduction of vma locks, the vmas have to be locked as well during
such walks to prevent concurrent page faults in these areas. Add an
additional member to mm_walk_ops to indicate locking requirements for the
walk.
The change ensures that page walks which prevent concurrent page faults
by write-locking mmap_lock, operate correctly after introduction of
per-vma locks. With per-vma locks page faults can be handled under vma
lock without taking mmap_lock at all, so write locking mmap_lock would
not stop them. The change ensures vmas are properly locked during such
walks.
A sample issue this solves is do_mbind() performing queue_pages_range()
to queue pages for migration. Without this change a concurrent page
can be faulted into the area and be left out of migration.
Link: https://lkml.kernel.org/r/20230804152724.3090321-2-surenb@google.com
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Suggested-by: Linus Torvalds <torvalds@linuxfoundation.org>
Suggested-by: Jann Horn <jannh@google.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Hugh Dickins <hughd@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Laurent Dufour <ldufour@linux.ibm.com>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Michel Lespinasse <michel@lespinasse.org>
Cc: Peter Xu <peterx@redhat.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
damos_new_filter() is not initializing the list field of newly allocated
filter object. However, DAMON sysfs interface and DAMON_RECLAIM are not
initializing it after calling damos_new_filter(). As a result, accessing
uninitialized memory is possible. Actually, adding multiple DAMOS filters
via DAMON sysfs interface caused NULL pointer dereferencing. Initialize
the field just after the allocation from damos_new_filter().
Link: https://lkml.kernel.org/r/20230729203733.38949-2-sj@kernel.org
Fixes: 98def236f6 ("mm/damon/core: implement damos filter")
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Commit 5ff6e2fff8 ("mm/damon/core: fix divide error in
damon_nr_accesses_to_accesses_bp()") fixed a bug by adding arguments
validation in damon_set_attrs(). Add a unit test for the added validation
to ensure the bug cannot occur again.
Link: https://lkml.kernel.org/r/20230615183323.87561-1-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Reviewed-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Convert all instances of direct pte_t* dereferencing to instead use
ptep_get() helper. This means that by default, the accesses change from a
C dereference to a READ_ONCE(). This is technically the correct thing to
do since where pgtables are modified by HW (for access/dirty) they are
volatile and therefore we should always ensure READ_ONCE() semantics.
But more importantly, by always using the helper, it can be overridden by
the architecture to fully encapsulate the contents of the pte. Arch code
is deliberately not converted, as the arch code knows best. It is
intended that arch code (arm64) will override the default with its own
implementation that can (e.g.) hide certain bits from the core code, or
determine young/dirty status by mixing in state from another source.
Conversion was done using Coccinelle:
----
// $ make coccicheck \
// COCCI=ptepget.cocci \
// SPFLAGS="--include-headers" \
// MODE=patch
virtual patch
@ depends on patch @
pte_t *v;
@@
- *v
+ ptep_get(v)
----
Then reviewed and hand-edited to avoid multiple unnecessary calls to
ptep_get(), instead opting to store the result of a single call in a
variable, where it is correct to do so. This aims to negate any cost of
READ_ONCE() and will benefit arch-overrides that may be more complex.
Included is a fix for an issue in an earlier version of this patch that
was pointed out by kernel test robot. The issue arose because config
MMU=n elides definition of the ptep helper functions, including
ptep_get(). HUGETLB_PAGE=n configs still define a simple
huge_ptep_clear_flush() for linking purposes, which dereferences the ptep.
So when both configs are disabled, this caused a build error because
ptep_get() is not defined. Fix by continuing to do a direct dereference
when MMU=n. This is safe because for this config the arch code cannot be
trying to virtualize the ptes because none of the ptep helpers are
defined.
Link: https://lkml.kernel.org/r/20230612151545.3317766-4-ryan.roberts@arm.com
Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/oe-kbuild-all/202305120142.yXsNEo6H-lkp@intel.com/
Signed-off-by: Ryan Roberts <ryan.roberts@arm.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alex Williamson <alex.williamson@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Andrey Konovalov <andreyknvl@gmail.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Dave Airlie <airlied@gmail.com>
Cc: Dimitri Sivanich <dimitri.sivanich@hpe.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Jérôme Glisse <jglisse@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Lorenzo Stoakes <lstoakes@gmail.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Mike Rapoport (IBM) <rppt@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Naoya Horiguchi <naoya.horiguchi@nec.com>
Cc: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com>
Cc: Pavel Tatashin <pasha.tatashin@soleen.com>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: SeongJae Park <sj@kernel.org>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Uladzislau Rezki (Sony) <urezki@gmail.com>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Yu Zhao <yuzhao@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Simple walk_page_range() users should set ACTION_AGAIN to retry when
pte_offset_map_lock() fails.
No need to check pmd_trans_unstable(): that was precisely to avoid the
possiblity of calling pte_offset_map() on a racily removed or inserted THP
entry, but such cases are now safely handled inside it. Likewise there is
no need to check pmd_none() or pmd_bad() before calling it.
Link: https://lkml.kernel.org/r/c77d9d10-3aad-e3ce-4896-99e91c7947f3@google.com
Signed-off-by: Hugh Dickins <hughd@google.com>
Reviewed-by: SeongJae Park <sj@kernel.org> for mm/damon part
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: "Huang, Ying" <ying.huang@intel.com>
Cc: Ira Weiny <ira.weiny@intel.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Lorenzo Stoakes <lstoakes@gmail.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Mike Rapoport (IBM) <rppt@kernel.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Naoya Horiguchi <naoya.horiguchi@nec.com>
Cc: Pavel Tatashin <pasha.tatashin@soleen.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Qi Zheng <zhengqi.arch@bytedance.com>
Cc: Ralph Campbell <rcampbell@nvidia.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Song Liu <song@kernel.org>
Cc: Steven Price <steven.price@arm.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Will Deacon <will@kernel.org>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Yu Zhao <yuzhao@google.com>
Cc: Zack Rusin <zackr@vmware.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
With the fix in place to atomically test and clear young on ptes and pmds,
simplify the code to handle the clearing for both the primary mmu and the
mmu notifier with a single API call.
Link: https://lkml.kernel.org/r/20230602092949.545577-4-ryan.roberts@arm.com
Signed-off-by: Ryan Roberts <ryan.roberts@arm.com>
Acked-by: Yu Zhao <yuzhao@google.com>
Reviewed-by: SeongJae Park <sj@kernel.org>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Lorenzo Stoakes <lstoakes@gmail.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Mike Rapoport (IBM) <rppt@kernel.org>
Cc: Uladzislau Rezki (Sony) <urezki@gmail.com>
Cc: Zi Yan <ziy@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
It is racy to non-atomically read a pte, then clear the young bit, then
write it back as this could discard dirty information. Further, it is bad
practice to directly set a pte entry within a table. Instead clearing
young must go through the arch-provided helper,
ptep_test_and_clear_young() to ensure it is modified atomically and to
give the arch code visibility and allow it to check (and potentially
modify) the operation.
Link: https://lkml.kernel.org/r/20230602092949.545577-3-ryan.roberts@arm.com
Fixes: 3f49584b26 ("mm/damon: implement primitives for the virtual memory address spaces").
Signed-off-by: Ryan Roberts <ryan.roberts@arm.com>
Reviewed-by: Zi Yan <ziy@nvidia.com>
Reviewed-by: SeongJae Park <sj@kernel.org>
Reviewed-by: Mike Rapoport (IBM) <rppt@kernel.org>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Lorenzo Stoakes <lstoakes@gmail.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Uladzislau Rezki (Sony) <urezki@gmail.com>
Cc: Yu Zhao <yuzhao@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The *folio_sz in damon_pa_young() will be used(as last_folio_sz) by
__damon_pa_check_access(), so it's need to be updated, fix missing branch.
Link: https://lkml.kernel.org/r/20230308083311.120951-4-wangkefeng.wang@huawei.com
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Reviewed-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Since commit ee6d3dd4ed ("driver core: make kobj_type constant.") the
driver core allows the usage of const struct kobj_type.
Take advantage of this to constify the structure definition to prevent
modification at runtime.
These structures were not constified in commit e56397e8c4
("mm/damon/sysfs: make kobj_type structures constant") as they didn't
exist when that patch was written.
Link: https://lkml.kernel.org/r/20230324-b4-kobj_type-damon2-v1-1-48ddbf1c8fcf@weissschuh.net
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Reviewed-by: SeongJae Park <sj@kernel.org>
Reviewed-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
damon_pa_mark_accessed_or_deactivate() is accessing a folio via
folio_nr_pages() after folio_put() for the folio has invoked. Fix it.
Link: https://lkml.kernel.org/r/20230304193949.296391-3-sj@kernel.org
Fixes: f70da5ee8f ("mm/damon: convert damon_pa_mark_accessed_or_deactivate() to use folios")
Signed-off-by: SeongJae Park <sj@kernel.org>
Reviewed-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Vishal Moola (Oracle) <vishal.moola@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "mm/damon/paddr: Fix folio-use-after-put bugs".
There are two folio accesses after folio_put() in mm/damon/paddr.c file.
Fix those.
This patch (of 2):
damon_pa_young() is accessing a folio via folio_size() after folio_put()
for the folio has invoked. Fix it.
Link: https://lkml.kernel.org/r/20230304193949.296391-1-sj@kernel.org
Link: https://lkml.kernel.org/r/20230304193949.296391-2-sj@kernel.org
Fixes: 397b0c3a58 ("mm/damon/paddr: remove folio_sz field from damon_pa_access_chk_result")
Signed-off-by: SeongJae Park <sj@kernel.org>
Reviewed-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Vishal Moola (Oracle) <vishal.moola@gmail.com>
Cc: <stable@vger.kernel.org> [6.2.x]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
damon_get_folio() would always increase folio _refcount and
folio_isolate_lru() would increase folio _refcount if the folio's lru flag
is set.
If an unevictable folio isolated successfully, there will be two more
_refcount. The one from folio_isolate_lru() will be decreased in
folio_puback_lru(), but the other one from damon_get_folio() will be left
behind. This causes a pin page.
Whatever the case, the _refcount from damon_get_folio() should be
decreased.
Link: https://lkml.kernel.org/r/20230222064223.6735-1-andrew.yang@mediatek.com
Fixes: 57223ac295 ("mm/damon/paddr: support the pageout scheme")
Signed-off-by: andrew.yang <andrew.yang@mediatek.com>
Reviewed-by: SeongJae Park <sj@kernel.org>
Cc: <stable@vger.kernel.org> [5.16.x]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "Change the return value for page isolation functions", v3.
Now the page isolation functions did not return a boolean to indicate
success or not, instead it will return a negative error when failed
to isolate a page. So below code used in most places seem a boolean
success/failure thing, which can confuse people whether the isolation
is successful.
if (folio_isolate_lru(folio))
continue;
Moreover the page isolation functions only return 0 or -EBUSY, and
most users did not care about the negative error except for few users,
thus we can convert all page isolation functions to return a boolean
value, which can remove the confusion to make code more clear.
No functional changes intended in this patch series.
This patch (of 4):
Now the folio_isolate_lru() did not return a boolean value to indicate
isolation success or not, however below code checking the return value can
make people think that it was a boolean success/failure thing, which makes
people easy to make mistakes (see the fix patch[1]).
if (folio_isolate_lru(folio))
continue;
Thus it's better to check the negative error value expilictly returned by
folio_isolate_lru(), which makes code more clear per Linus's
suggestion[2]. Moreover Matthew suggested we can convert the isolation
functions to return a boolean[3], since most users did not care about the
negative error value, and can also remove the confusing of checking return
value.
So this patch converts the folio_isolate_lru() to return a boolean value,
which means return 'true' to indicate the folio isolation is successful,
and 'false' means a failure to isolation. Meanwhile changing all users'
logic of checking the isolation state.
No functional changes intended.
[1] https://lore.kernel.org/all/20230131063206.28820-1-Kuan-Ying.Lee@mediatek.com/T/#u
[2] https://lore.kernel.org/all/CAHk-=wiBrY+O-4=2mrbVyxR+hOqfdJ=Do6xoucfJ9_5az01L4Q@mail.gmail.com/
[3] https://lore.kernel.org/all/Y+sTFqwMNAjDvxw3@casper.infradead.org/
Link: https://lkml.kernel.org/r/cover.1676424378.git.baolin.wang@linux.alibaba.com
Link: https://lkml.kernel.org/r/8a4e3679ed4196168efadf7ea36c038f2f7d5aa9.1676424378.git.baolin.wang@linux.alibaba.com
Signed-off-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Reviewed-by: SeongJae Park <sj@kernel.org>
Acked-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Naoya Horiguchi <naoya.horiguchi@nec.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Shakeel Butt <shakeelb@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
DAMON debugfs interface has announced to be deprecated after >v5.15 LTS
kernel is released. And, v6.1.y has announced to be an LTS[1].
Though the announcement was there for a while, some people might not
noticed that so far. Also, some users could depend on it and have
problems at movng to the alternative (DAMON sysfs interface).
For such cases, note DAMON debugfs interface as deprecated, and contacts
to ask helps on the Kconfig.
[1] https://git.kernel.org/pub/scm/docs/kernel/website.git/commit/?id=332e9121320bc7461b2d3a79665caf153e51732c
Link: https://lkml.kernel.org/r/20230209192009.7885-3-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Since commit ee6d3dd4ed ("driver core: make kobj_type constant.") the
driver core allows the usage of const struct kobj_type.
Take advantage of this to constify the structure definitions to prevent
modification at runtime.
Link: https://lkml.kernel.org/r/20230207-kobj_type-damon-v1-1-9d4fea6a465b@weissschuh.net
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Reviewed-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Prepare for the removal of the vma_mas_store() function by open coding the
maple tree store in this test code. Set the range of the maple state and
call the store function directly.
Link: https://lkml.kernel.org/r/20230120162650.984577-31-Liam.Howlett@oracle.com
Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Reported-by: kernel test robot <lkp@intel.com>
Reviewed-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Add a simple unit test for damon_update_monitoring_results() function.
Link: https://lkml.kernel.org/r/20230119013831.1911-4-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
region->nr_accesses is the number of sampling intervals in the last
aggregation interval that access to the region has found, and region->age
is the number of aggregation intervals that its access pattern has
maintained. Hence, the real meaning of the two fields' values is
depending on current sampling and aggregation intervals.
This means the values need to be updated for every sampling and/or
aggregation intervals updates. As DAMON core doesn't, it is a duty of
in-kernel DAMON framework applications like DAMON sysfs interface, or the
userspace users.
Handling it in userspace or in-kernel DAMON application is complicated,
inefficient, and repetitive compared to doing the update in DAMON core.
Do the update in DAMON core.
Link: https://lkml.kernel.org/r/20230119013831.1911-3-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Sometimes there is no scheme in damon's context, for example just use damo
record to monitor workload's data access pattern.
If current damon context doesn't have any scheme in the list, kdamond has
no need to iterate over list of all targets and regions but do nothing.
So, skip apply schemes when ctx->schemes is empty.
Link: https://lkml.kernel.org/r/20230116062347.1148553-1-huaisheng.ye@intel.com
Signed-off-by: Huaisheng Ye <huaisheng.ye@intel.com>
Reviewed-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The implementation of strscpy() is more robust and safer.
That's now the recommended way to copy NUL-terminated strings.
Link: https://lkml.kernel.org/r/202301091946553770006@zte.com.cn
Signed-off-by: Xu Panda <xu.panda@zte.com.cn>
Signed-off-by: Yang Yang <yang.yang29@zte.com.cn>
Reviewed-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
'damon_pa_access_chk_result' struct contains only one field. Use a
variable instead.
Link: https://lkml.kernel.org/r/20230109213335.62525-7-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
DAMON physical address space monitoring operations set gets and saves size
of the folio for a given physical address inside rmap walks, but it can be
directly caluclated outside of the walks. Remove the 'folio_sz' field
from 'damon_pa_access_chk_result struct' and calculate the size directly
from outside of the walks.
Link: https://lkml.kernel.org/r/20230109213335.62525-6-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
DAMON's physical address space monitoring operations set is using folio
now. Rename 'damon_pa_access_chk_result->page_sz' to reflect the fact.
Link: https://lkml.kernel.org/r/20230109213335.62525-5-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
DAMON virtual address spaces monitoring operations set doesn't set folio
size of the access checked address if access is not found. It could
result in unnecessary and inefficient repeated check. Appropriately set
the size regardless of access check result.
Link: https://lkml.kernel.org/r/20230109213335.62525-4-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
DAMON virtual address space monitoring operations set treats folios having
non-HPAGE_PMD_SIZE size as having PAGE_SIZE size. Use the exact size of
the folio.
Link: https://lkml.kernel.org/r/20230109213335.62525-3-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "mm/damon/{v,p}addr: misc fixups for folio usage".
DAMON's monitoring operations set for the virtual and the physical address
spaces use folio now, but some code is not reflecting the fact. Further
cleanup the code for folio usage.
This patch (of 6):
DAMON's virtual address space monitoring operations set is using folio
now. Rename 'damon_pa_access_chk_result->page_sz' to reflect the fact.
Link: https://lkml.kernel.org/r/20230109213335.62525-1-sj@kernel.org
Link: https://lkml.kernel.org/r/20230109213335.62525-2-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Convert damon_hugetlb_mkold() and damon_young_hugetlb_entry() to
use a folio.
Link: https://lkml.kernel.org/r/20221230070849.63358-9-wangkefeng.wang@huawei.com
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Reviewed-by: SeongJae Park <sj@kernel.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Vishal Moola (Oracle) <vishal.moola@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
After all damon_get_page() callers are converted to damon_get_folio(),
remove unneeded wrapper damon_get_page().
Link: https://lkml.kernel.org/r/20221230070849.63358-8-wangkefeng.wang@huawei.com
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Reviewed-by: SeongJae Park <sj@kernel.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Vishal Moola (Oracle) <vishal.moola@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
With damon_get_folio(), let's convert damon_young_pmd_entry()
to use a folio.
Link: https://lkml.kernel.org/r/20221230070849.63358-7-wangkefeng.wang@huawei.com
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Reviewed-by: SeongJae Park <sj@kernel.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Vishal Moola (Oracle) <vishal.moola@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
With damon_get_folio(), let's convert all the damon_pa_*() to use a folio.
Link: https://lkml.kernel.org/r/20221230070849.63358-6-wangkefeng.wang@huawei.com
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Reviewed-by: SeongJae Park <sj@kernel.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Vishal Moola (Oracle) <vishal.moola@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
With damon_get_folio(), let's convert damon_ptep_mkold() and
damon_pmdp_mkold() to use a folio.
Link: https://lkml.kernel.org/r/20221230070849.63358-5-wangkefeng.wang@huawei.com
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Reviewed-by: SeongJae Park <sj@kernel.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Vishal Moola (Oracle) <vishal.moola@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Introduce damon_get_folio(), and the temporary wrapper function
damon_get_page(), which help us to convert damon related functions to use
folios, and it will be dropped once the conversion is completed.
Link: https://lkml.kernel.org/r/20221230070849.63358-4-wangkefeng.wang@huawei.com
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Reviewed-by: SeongJae Park <sj@kernel.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Vishal Moola (Oracle) <vishal.moola@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Deactivate_page() has already been converted to use folios, this change
converts it to take in a folio argument instead of calling page_folio().
It also renames the function folio_deactivate() to be more consistent with
other folio functions.
[akpm@linux-foundation.org: fix left-over comments, per Yu Zhao]
Link: https://lkml.kernel.org/r/20221221180848.20774-5-vishal.moola@gmail.com
Signed-off-by: Vishal Moola (Oracle) <vishal.moola@gmail.com>
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
This change replaces 2 calls to compound_head() from put_page() and 1 call
from mark_page_accessed() with one from page_folio(). This is in
preparation for the conversion of deactivate_page() to folio_deactivate().
Link: https://lkml.kernel.org/r/20221221180848.20774-4-vishal.moola@gmail.com
Signed-off-by: Vishal Moola (Oracle) <vishal.moola@gmail.com>
Reviewed-by: SeongJae Park <sj@kernel.org>
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Implement 'nr_filters' file under 'filters' directory, which will be used
to populate specific number of 'filter' directory under the directory,
similar to other 'nr_*' files in DAMON sysfs interface.
Link: https://lkml.kernel.org/r/20221205230830.144349-8-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Implement DAMOS filter directory which will be located under the filters
directory. The directory provides three files, namely type, matching, and
memcg_path. 'type' and 'matching' will be directly connected to the
fields of 'struct damos_filter' having same name. 'memcg_path' will
receive the path of the memory cgroup of the interest and later converted
to memcg id when it's committed.
Link: https://lkml.kernel.org/r/20221205230830.144349-7-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
DAMOS filters are currently supported by only DAMON kernel API. To expose
the feature to user space, implement a DAMON sysfs directory named
'filters' under each scheme directory. Please note that this is
implementing only the directory. Following commits will implement more
files and directories, and finally connect the DAMOS filters feature.
Link: https://lkml.kernel.org/r/20221205230830.144349-6-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
In some cases, for example if users have confidence at anonymous pages
management or the swap device is too slow, users would want to avoid
DAMON_RECLAIM swapping the anonymous pages out. For such case, add yet
another DAMON_RECLAIM parameter, namely 'skip_anon'. When it is set as
'Y', DAMON_RECLAIM will avoid reclaiming anonymous pages using a DAMOS
filter.
Link: https://lkml.kernel.org/r/20221205230830.144349-4-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Implement support of the DAMOS filters in the physical address space
monitoring operations set, for all DAMOS actions that it supports
including 'pageout', 'lru_prio', and 'lru_deprio'.
Link: https://lkml.kernel.org/r/20221205230830.144349-3-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "implement DAMOS filtering for anon pages and/or specific
memory cgroups"
DAMOS let users do system operations in a data access pattern oriented
way. The data access pattern, which is extracted by DAMON, is somewhat
accurate more than what user space could know in many cases. However, in
some situation, users could know something more than the kernel about the
pattern or some special requirements for some types of memory or
processes. For example, some users would have slow swap devices and knows
latency-ciritical processes and therefore want to use DAMON-based
proactive reclamation (DAMON_RECLAIM) for only non-anonymous pages of
non-latency-critical processes.
For such restriction, users could exclude the memory regions from the
initial monitoring regions and use non-dynamic monitoring regions update
monitoring operations set including fvaddr and paddr. They could also
adjust the DAMOS target access pattern. For dynamically changing memory
layout and access pattern, those would be not enough.
To help the case, add an interface, namely DAMOS filters, which can be
used to avoid the DAMOS actions be applied to specific types of memory, to
DAMON kernel API (damon.h). At the moment, it supports filtering
anonymous pages and/or specific memory cgroups in or out for each DAMOS
scheme.
This patchset adds the support for all DAMOS actions that 'paddr'
monitoring operations set supports ('pageout', 'lru_prio', and
'lru_deprio'), and the functionality is exposed via DAMON kernel API
(damon.h) the DAMON sysfs interface (/sys/kernel/mm/damon/admins/), and
DAMON_RECLAIM module parameters.
Patches Sequence
----------------
First patch implements DAMOS filter interface to DAMON kernel API. Second
patch makes the physical address space monitoring operations set to
support the filters from all supporting DAMOS actions. Third patch adds
anonymous pages filter support to DAMON_RECLAIM, and the fourth patch
documents the DAMON_RECLAIM's new feature. Fifth to seventh patches
implement DAMON sysfs files for support of the filters, and eighth patch
connects the file to use DAMOS filters feature. Ninth patch adds simple
self test cases for DAMOS filters of the sysfs interface. Finally,
following two patches (tenth and eleventh) document the new features and
interfaces.
This patch (of 11):
DAMOS lets users do system operation in a data access pattern oriented
way. The data access pattern, which is extracted by DAMON, is somewhat
accurate more than what user space could know in many cases. However, in
some situation, users could know something more than the kernel about the
pattern or some special requirements for some types of memory or
processes. For example, some users would have slow swap devices and knows
latency-ciritical processes and therefore want to use DAMON-based
proactive reclamation (DAMON_RECLAIM) for only non-anonymous pages of
non-latency-critical processes.
For such restriction, users could exclude the memory regions from the
initial monitoring regions and use non-dynamic monitoring regions update
monitoring operations set including fvaddr and paddr. They could also
adjust the DAMOS target access pattern. For dynamically changing memory
layout and access pattern, those would be not enough.
To help the case, add an interface, namely DAMOS filters, which can be
used to avoid the DAMOS actions be applied to specific types of memory, to
DAMON kernel API (damon.h). At the moment, it supports filtering
anonymous pages and/or specific memory cgroups in or out for each DAMOS
scheme.
Note that this commit adds only the interface to the DAMON kernel API.
The impelmentation should be made in the monitoring operations sets, and
following commits will add that.
Link: https://lkml.kernel.org/r/20221205230830.144349-1-sj@kernel.org
Link: https://lkml.kernel.org/r/20221205230830.144349-2-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
strtobool() is the same as kstrtobool(). However, the latter is more used
within the kernel.
In order to remove strtobool() and slightly simplify kstrtox.h, switch to
the other function name.
While at it, include the corresponding header file (<linux/kstrtox.h>)
Link: https://lkml.kernel.org/r/ed2b46489a513988688decb53850339cc228940c.1667336095.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
When there are huge number of DAMON regions that specific scheme actions
are tried to be applied, directories and files under 'tried_regions'
scheme directory could waste some memory. Add another special input
keyword ('clear_schemes_tried_regions') for 'state' file of each kdamond
sysfs directory that can be used for cleanup of the 'tried_regions'
sub-directories.
[sj@kernel.org: skip regions clearing if the scheme directory was removed]
Link: https://lkml.kernel.org/r/20221114182954.4745-3-sj@kernel.org
Link: https://lkml.kernel.org/r/20221101220328.95765-6-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Implement the code for filling the data of 'tried_regions' DAMON sysfs
directory. With this commit, DAMON sysfs interface users can write a
special keyword, 'update_schemes_tried_regions' to the corresponding
'state' file of the kdamond. Then, DAMON sysfs interface will collect the
tried regions information using the 'before_damos_apply()' callback for
one aggregation interval and populate scheme region directories with the
values.
[sj@kernel.org: skip tried regions update if the scheme directory was removed]
Link: https://lkml.kernel.org/r/20221114182954.4745-2-sj@kernel.org
Link: https://lkml.kernel.org/r/20221101220328.95765-5-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Implement region directories under 'tried_regions' directory of each
scheme DAMON sysfs directory. This directory will provide the address
range, the monitored access frequency ('nr_accesses'), and the age of each
DAMON region that corresponding DAMON-based operation scheme has tried to
be applied. Note that this commit doesn't implement the code for filling
the data but only the sysfs directory.
Link: https://lkml.kernel.org/r/20221101220328.95765-4-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
For efficient and simple query-like DAMON monitoring results readings and
deep level investigations of DAMOS, DAMON kernel API
(include/linux/damon.h) users can use 'before_damos_apply' DAMON callback.
However, DAMON sysfs interface users don't have such option.
Add a directory, namely 'tried_regions', under each scheme directory to
use it as the interface for the purpose. Note that this commit is
implementing only the directory but the data filling.
After the data filling change is made, users will be able to signal DAMON
to fill the directory with the regions that corresponding scheme has tried
to be applied. By setting the access pattern of the scheme, users could
do the efficient query-like monitoring.
Link: https://lkml.kernel.org/r/20221101220328.95765-3-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "efficiently expose damos action tried regions information".
DAMON users can retrieve the monitoring results via 'after_aggregation'
callbacks if the user is using the kernel API, or 'damon_aggregated'
tracepoint if the user is in the user space. Those are useful if full
monitoring results are necessary. However, if the user has interest in
only a snapshot of the results for some regions having specific access
pattern, the interfaces could be inefficient. For example, some users
only want to know which memory regions are not accessed for more than a
specific time at the moment.
Also, some DAMOS users would want to know exactly to what memory regions
the schemes' actions tried to be applied, for a debugging or a tuning. As
DAMOS has its internal mechanism for quota and regions prioritization, the
users would need to simulate DAMOS' mechanism against the monitoring
results. That's unnecessarily complex.
This patchset implements DAMON kernel API callbacks and sysfs directory
for efficient exposure of the information for the use cases. The new
callback will be called for each region when a DAMOS action is gonna tried
to be applied to it. The sysfs directory will be called 'tried_regions'
and placed under each scheme sysfs directory. Users can write a special
keyworkd, 'update_schemes_regions', to the 'state' file of a kdamond sysfs
directory. Then, DAMON sysfs interface will fill the directory with the
information of regions that corresponding scheme action was tried to be
applied for next one aggregation interval.
Patches Sequence
----------------
The first one (patch 1) implements the callback for the kernel space
users. Following two patches (patches 2 and 3) implements sysfs
directories for the information and its sub directories. Two patches
(patches 4 and 5) for implementing the special keywords for filling the
data to and cleaning up the directories follow. Patch 6 adds a selftest
for the new sysfs directory. Finally, two patches (patches 7 and 8)
document the new feature in the administrator guide and the ABI document.
This patch (of 8):
Getting DAMON monitoring results of only specific access pattern (e.g.,
getting address ranges of memory that not accessed at all for two minutes)
can be useful for efficient monitoring of the system. The information can
also be helpful for deep level investigation of DAMON-based operation
schemes.
For that, users need to record (in case of the user space users) or
iterate (in case of the kernel space users) full monitoring results and
filter it out for the specific access pattern. In case of the DAMOS
investigation, users will even need to simulate DAMOS' quota and
prioritization mechanisms. It's inefficient and complex.
Add a new DAMON callback that will be called before each scheme is applied
to each region. DAMON kernel API users will be able to do the query-like
monitoring results collection, or DAMOS investigation in an efficient and
simple way using it.
Commits for providing the capability to the user space users will follow.
Link: https://lkml.kernel.org/r/20221101220328.95765-1-sj@kernel.org
Link: https://lkml.kernel.org/r/20221101220328.95765-2-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Writing a value to DAMON_RECLAIM's 'enabled' parameter turns on or off
DAMON in an ansychronous way. This means the parameter cannot be used to
read the current status of DAMON_RECLAIM. 'kdamond_pid' parameter should
be used instead for the purpose. The documentation is easy to be read as
it works in a synchronous way, so it is a little bit confusing. It also
makes the user space tooling dirty.
There's no real reason to have the asynchronous behavior, though. Simply
make the parameter works synchronously, rather than updating the document.
Link: https://lkml.kernel.org/r/20221025173650.90624-4-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "mm/damon/reclaim,lru_sort: enable/disable synchronously".
Writing a value to DAMON_RECLAIM and DAMON_LRU_SORT's 'enabled' parameters
turns on or off DAMON in an ansychronous way. This means the parameter
cannot be used to read the current status of them. 'kdamond_pid'
parameter should be used instead for the purpose. The documentation is
easy to be read as it works in a synchronous way, so it is a little bit
confusing. It also makes the user space tooling dirty.
There's no real reason to have the asynchronous behavior, though. Simply
make the parameter works synchronously, rather than updating the document.
The first and second patches changes the behavior of the 'enabled'
parameter for DAMON_RECLAIM and adds a selftest for the changed behavior,
respectively. Following two patches make the same changes for
DAMON_LRU_SORT.
This patch (of 4):
Writing a value to DAMON_RECLAIM's 'enabled' parameter turns on or off
DAMON in an ansychronous way. This means the parameter cannot be used to
read the current status of DAMON_RECLAIM. 'kdamond_pid' parameter should
be used instead for the purpose. The documentation is easy to be read as
it works in a synchronous way, so it is a little bit confusing. It also
makes the user space tooling dirty.
There's no real reason to have the asynchronous behavior, though. Simply
make the parameter works synchronously, rather than updating the document.
Link: https://lkml.kernel.org/r/20221025173650.90624-1-sj@kernel.org
Link: https://lkml.kernel.org/r/20221025173650.90624-2-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Dan Carpenter