gcc-13 warns about function definitions for builtin interfaces that have a
different prototype, e.g.:
In file included from kasan_test.c:31:
kasan.h:574:6: error: conflicting types for built-in function '__asan_register_globals'; expected 'void(void *, long int)' [-Werror=builtin-declaration-mismatch]
574 | void __asan_register_globals(struct kasan_global *globals, size_t size);
kasan.h:577:6: error: conflicting types for built-in function '__asan_alloca_poison'; expected 'void(void *, long int)' [-Werror=builtin-declaration-mismatch]
577 | void __asan_alloca_poison(unsigned long addr, size_t size);
kasan.h:580:6: error: conflicting types for built-in function '__asan_load1'; expected 'void(void *)' [-Werror=builtin-declaration-mismatch]
580 | void __asan_load1(unsigned long addr);
kasan.h:581:6: error: conflicting types for built-in function '__asan_store1'; expected 'void(void *)' [-Werror=builtin-declaration-mismatch]
581 | void __asan_store1(unsigned long addr);
kasan.h:643:6: error: conflicting types for built-in function '__hwasan_tag_memory'; expected 'void(void *, unsigned char, long int)' [-Werror=builtin-declaration-mismatch]
643 | void __hwasan_tag_memory(unsigned long addr, u8 tag, unsigned long size);
The two problems are:
- Addresses are passes as 'unsigned long' in the kernel, but gcc-13
expects a 'void *'.
- sizes meant to use a signed ssize_t rather than size_t.
Change all the prototypes to match these. Using 'void *' consistently for
addresses gets rid of a couple of type casts, so push that down to the
leaf functions where possible.
This now passes all randconfig builds on arm, arm64 and x86, but I have
not tested it on the other architectures that support kasan, since they
tend to fail randconfig builds in other ways. This might fail if any of
the 32-bit architectures expect a 'long' instead of 'int' for the size
argument.
The __asan_allocas_unpoison() function prototype is somewhat weird, since
it uses a pointer for 'stack_top' and an size_t for 'stack_bottom'. This
looks like it is meant to be 'addr' and 'size' like the others, but the
implementation clearly treats them as 'top' and 'bottom'.
Link: https://lkml.kernel.org/r/20230509145735.9263-2-arnd@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Konovalov <andreyknvl@gmail.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Marco Elver <elver@google.com>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Make KASAN scan metadata to infer the requested allocation size instead of
printing cache->object_size.
This patch fixes confusing slab-out-of-bounds reports as reported in:
https://bugzilla.kernel.org/show_bug.cgi?id=216457
As an example of the confusing behavior, the report below hints that the
allocation size was 192, while the kernel actually called kmalloc(184):
==================================================================
BUG: KASAN: slab-out-of-bounds in _find_next_bit+0x143/0x160 lib/find_bit.c:109
Read of size 8 at addr ffff8880175766b8 by task kworker/1:1/26
...
The buggy address belongs to the object at ffff888017576600
which belongs to the cache kmalloc-192 of size 192
The buggy address is located 184 bytes inside of
192-byte region [ffff888017576600, ffff8880175766c0)
...
Memory state around the buggy address:
ffff888017576580: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc
ffff888017576600: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>ffff888017576680: 00 00 00 00 00 00 00 fc fc fc fc fc fc fc fc fc
^
ffff888017576700: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
ffff888017576780: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
==================================================================
With this patch, the report shows:
==================================================================
...
The buggy address belongs to the object at ffff888017576600
which belongs to the cache kmalloc-192 of size 192
The buggy address is located 0 bytes to the right of
allocated 184-byte region [ffff888017576600, ffff8880175766b8)
...
==================================================================
Also report slab use-after-free bugs as "slab-use-after-free" and print
"freed" instead of "allocated" in the report when describing the accessed
memory region.
Also improve the metadata-related comment in kasan_find_first_bad_addr
and use addr_has_metadata across KASAN code instead of open-coding
KASAN_SHADOW_START checks.
[akpm@linux-foundation.org: fix printk warning]
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216457
Link: https://lkml.kernel.org/r/20230129021437.18812-1-Kuan-Ying.Lee@mediatek.com
Signed-off-by: Kuan-Ying Lee <Kuan-Ying.Lee@mediatek.com>
Co-developed-by: Andrey Konovalov <andreyknvl@gmail.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Chinwen Chang <chinwen.chang@mediatek.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Matthias Brugger <matthias.bgg@gmail.com>
Cc: Qun-Wei Lin <qun-wei.lin@mediatek.com>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Add support for the kasan.stacktrace command-line argument for Software
Tag-Based KASAN.
The following patch adds a command-line argument for selecting the stack
ring size, and, as the stack ring is supported by both the Software and
the Hardware Tag-Based KASAN modes, it is natural that both of them have
support for kasan.stacktrace too.
Link: https://lkml.kernel.org/r/3b43059103faa7f8796017847b7d674b658f11b5.1662411799.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Reviewed-by: Marco Elver <elver@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Evgenii Stepanov <eugenis@google.com>
Cc: Peter Collingbourne <pcc@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
There are multiple kasan modes. It makes sense that we add some
messages to know which kasan mode is active when booting up [1].
Link: https://bugzilla.kernel.org/show_bug.cgi?id=212195 [1]
Link: https://lkml.kernel.org/r/20211020094850.4113-1-Kuan-Ying.Lee@mediatek.com
Signed-off-by: Kuan-Ying Lee <Kuan-Ying.Lee@mediatek.com>
Reviewed-by: Marco Elver <elver@google.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Konovalov <andreyknvl@gmail.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Matthias Brugger <matthias.bgg@gmail.com>
Cc: Chinwen Chang <chinwen.chang@mediatek.com>
Cc: Yee Lee <yee.lee@mediatek.com>
Cc: Nicholas Tang <nicholas.tang@mediatek.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Merge misc updates from Andrew Morton:
"191 patches.
Subsystems affected by this patch series: kthread, ia64, scripts,
ntfs, squashfs, ocfs2, kernel/watchdog, and mm (gup, pagealloc, slab,
slub, kmemleak, dax, debug, pagecache, gup, swap, memcg, pagemap,
mprotect, bootmem, dma, tracing, vmalloc, kasan, initialization,
pagealloc, and memory-failure)"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (191 commits)
mm,hwpoison: make get_hwpoison_page() call get_any_page()
mm,hwpoison: send SIGBUS with error virutal address
mm/page_alloc: split pcp->high across all online CPUs for cpuless nodes
mm/page_alloc: allow high-order pages to be stored on the per-cpu lists
mm: replace CONFIG_FLAT_NODE_MEM_MAP with CONFIG_FLATMEM
mm: replace CONFIG_NEED_MULTIPLE_NODES with CONFIG_NUMA
docs: remove description of DISCONTIGMEM
arch, mm: remove stale mentions of DISCONIGMEM
mm: remove CONFIG_DISCONTIGMEM
m68k: remove support for DISCONTIGMEM
arc: remove support for DISCONTIGMEM
arc: update comment about HIGHMEM implementation
alpha: remove DISCONTIGMEM and NUMA
mm/page_alloc: move free_the_page
mm/page_alloc: fix counting of managed_pages
mm/page_alloc: improve memmap_pages dbg msg
mm: drop SECTION_SHIFT in code comments
mm/page_alloc: introduce vm.percpu_pagelist_high_fraction
mm/page_alloc: limit the number of pages on PCP lists when reclaim is active
mm/page_alloc: scale the number of pages that are batch freed
...
1. Move kasan_get_free_track() and kasan_set_free_info() into tags.c
and combine these two functions for SW_TAGS and HW_TAGS kasan mode.
2. Move kasan_get_bug_type() to report_tags.c and make this function
compatible for SW_TAGS and HW_TAGS kasan mode.
Link: https://lkml.kernel.org/r/20210626100931.22794-3-Kuan-Ying.Lee@mediatek.com
Signed-off-by: Kuan-Ying Lee <Kuan-Ying.Lee@mediatek.com>
Suggested-by: Marco Elver <elver@google.com>
Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Andrey Konovalov <andreyknvl@gmail.com>
Reviewed-by: Marco Elver <elver@google.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Chinwen Chang <chinwen.chang@mediatek.com>
Cc: Matthias Brugger <matthias.bgg@gmail.com>
Cc: Nicholas Tang <nicholas.tang@mediatek.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
By using outlined checks we can achieve a significant code size
improvement by moving the tag-based ASAN checks into separate
functions. Unlike the existing CONFIG_KASAN_OUTLINE mode these
functions have a custom calling convention that preserves most
registers and is specialized to the register containing the address
and the type of access, and as a result we can eliminate the code
size and performance overhead of a standard calling convention such
as AAPCS for these functions.
This change depends on a separate series of changes to Clang [1] to
support outlined checks in the kernel, although the change works fine
without them (we just don't get outlined checks). This is because the
flag -mllvm -hwasan-inline-all-checks=0 has no effect until the Clang
changes land. The flag was introduced in the Clang 9.0 timeframe as
part of the support for outlined checks in userspace and because our
minimum Clang version is 10.0 we can pass it unconditionally.
Outlined checks require a new runtime function with a custom calling
convention. Add this function to arch/arm64/lib.
I measured the code size of defconfig + tag-based KASAN, as well
as boot time (i.e. time to init launch) on a DragonBoard 845c with
an Android arm64 GKI kernel. The results are below:
code size boot time
CONFIG_KASAN_INLINE=y before 92824064 6.18s
CONFIG_KASAN_INLINE=y after 38822400 6.65s
CONFIG_KASAN_OUTLINE=y 39215616 11.48s
We can see straight away that specialized outlined checks beat the
existing CONFIG_KASAN_OUTLINE=y on both code size and boot time
for tag-based ASAN.
As for the comparison between CONFIG_KASAN_INLINE=y before and after
we saw similar performance numbers in userspace [2] and decided
that since the performance overhead is minimal compared to the
overhead of tag-based ASAN itself as well as compared to the code
size improvements we would just replace the inlined checks with the
specialized outlined checks without the option to select between them,
and that is what I have implemented in this patch.
Signed-off-by: Peter Collingbourne <pcc@google.com>
Acked-by: Andrey Konovalov <andreyknvl@gmail.com>
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Tested-by: Mark Rutland <mark.rutland@arm.com>
Link: https://linux-review.googlesource.com/id/I1a30036c70ab3c3ee78d75ed9b87ef7cdc3fdb76
Link: [1] https://reviews.llvm.org/D90426
Link: [2] https://reviews.llvm.org/D56954
Link: https://lore.kernel.org/r/20210526174927.2477847-3-pcc@google.com
Signed-off-by: Will Deacon <will@kernel.org>
This change adds an argument to kasan_poison() and kasan_unpoison() that
allows initializing memory along with setting the tags for HW_TAGS.
Combining setting allocation tags with memory initialization will improve
HW_TAGS KASAN performance when init_on_alloc/free is enabled.
This change doesn't integrate memory initialization with KASAN, this is
done is subsequent patches in this series.
Link: https://lkml.kernel.org/r/3054314039fa64510947e674180d675cab1b4c41.1615296150.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Reviewed-by: Marco Elver <elver@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Branislav Rankov <Branislav.Rankov@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Evgenii Stepanov <eugenis@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Kevin Brodsky <kevin.brodsky@arm.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Peter Collingbourne <pcc@google.com>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
We can sometimes end up with kasan_byte_accessible() being called on
non-slab memory. For example ksize() and krealloc() may end up calling it
on KFENCE allocated memory. In this case the memory will be tagged with
KASAN_SHADOW_INIT, which a subsequent patch ("kasan: initialize shadow to
TAG_INVALID for SW_TAGS") will set to the same value as KASAN_TAG_INVALID,
causing kasan_byte_accessible() to fail when called on non-slab memory.
This highlighted the fact that the check in kasan_byte_accessible() was
inconsistent with checks as implemented for loads and stores
(kasan_check_range() in SW tags mode and hardware-implemented checks in HW
tags mode). kasan_check_range() does not have a check for
KASAN_TAG_INVALID, and instead has a comparison against
KASAN_SHADOW_START. In HW tags mode, we do not have either, but we do set
TCR_EL1.TCMA which corresponds with the comparison against
KASAN_TAG_KERNEL.
Therefore, update kasan_byte_accessible() for both SW and HW tags modes to
correspond with the respective checks on loads and stores.
Link: https://linux-review.googlesource.com/id/Ic6d40803c57dcc6331bd97fbb9a60b0d38a65a36
Link: https://lkml.kernel.org/r/20210405220647.1965262-1-pcc@google.com
Signed-off-by: Peter Collingbourne <pcc@google.com>
Reviewed-by: Andrey Konovalov <andreyknvl@gmail.com>
Reviewed-by: Marco Elver <elver@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Peter Collingbourne <pcc@google.com>
Cc: Evgenii Stepanov <eugenis@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The currently existing kasan_check_read/write() annotations are intended
to be used for kernel modules that have KASAN compiler instrumentation
disabled. Thus, they are only relevant for the software KASAN modes that
rely on compiler instrumentation.
However there's another use case for these annotations: ksize() checks
that the object passed to it is indeed accessible before unpoisoning the
whole object. This is currently done via __kasan_check_read(), which is
compiled away for the hardware tag-based mode that doesn't rely on
compiler instrumentation. This leads to KASAN missing detecting some
memory corruptions.
Provide another annotation called kasan_check_byte() that is available
for all KASAN modes. As the implementation rename and reuse
kasan_check_invalid_free(). Use this new annotation in ksize().
To avoid having ksize() as the top frame in the reported stack trace
pass _RET_IP_ to __kasan_check_byte().
Also add a new ksize_uaf() test that checks that a use-after-free is
detected via ksize() itself, and via plain accesses that happen later.
Link: https://linux-review.googlesource.com/id/Iaabf771881d0f9ce1b969f2a62938e99d3308ec5
Link: https://lkml.kernel.org/r/f32ad74a60b28d8402482a38476f02bb7600f620.1610733117.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Reviewed-by: Marco Elver <elver@google.com>
Reviewed-by: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Branislav Rankov <Branislav.Rankov@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Evgenii Stepanov <eugenis@google.com>
Cc: Kevin Brodsky <kevin.brodsky@arm.com>
Cc: Peter Collingbourne <pcc@google.com>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Patch series "kasan: HW_TAGS tests support and fixes", v4.
This patchset adds support for running KASAN-KUnit tests with the
hardware tag-based mode and also contains a few fixes.
This patch (of 15):
There's a number of internal KASAN functions that are used across multiple
source code files and therefore aren't marked as static inline. To avoid
littering the kernel function names list with generic function names,
prefix all such KASAN functions with kasan_.
As a part of this change:
- Rename internal (un)poison_range() to kasan_(un)poison() (no _range)
to avoid name collision with a public kasan_unpoison_range().
- Rename check_memory_region() to kasan_check_range(), as it's a more
fitting name.
Link: https://lkml.kernel.org/r/cover.1610733117.git.andreyknvl@google.com
Link: https://linux-review.googlesource.com/id/I719cc93483d4ba288a634dba80ee6b7f2809cd26
Link: https://lkml.kernel.org/r/13777aedf8d3ebbf35891136e1f2287e2f34aaba.1610733117.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Suggested-by: Marco Elver <elver@google.com>
Reviewed-by: Marco Elver <elver@google.com>
Reviewed-by: Alexander Potapenko <glider@google.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Peter Collingbourne <pcc@google.com>
Cc: Evgenii Stepanov <eugenis@google.com>
Cc: Branislav Rankov <Branislav.Rankov@arm.com>
Cc: Kevin Brodsky <kevin.brodsky@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
KASAN marks caches that are sanitized with the SLAB_KASAN cache flag.
Currently if the metadata that is appended after the object (stores e.g.
stack trace ids) doesn't fit into KMALLOC_MAX_SIZE (can only happen with
SLAB, see the comment in the patch), KASAN turns off sanitization
completely.
With this change sanitization of the object data is always enabled.
However the metadata is only stored when it fits. Instead of checking for
SLAB_KASAN flag accross the code to find out whether the metadata is
there, use cache->kasan_info.alloc/free_meta_offset. As 0 can be a valid
value for free_meta_offset, introduce KASAN_NO_FREE_META as an indicator
that the free metadata is missing.
Without this change all sanitized KASAN objects would be put into
quarantine with generic KASAN. With this change, only the objects that
have metadata (i.e. when it fits) are put into quarantine, the rest is
freed right away.
Along the way rework __kasan_cache_create() and add claryfying comments.
Link: https://lkml.kernel.org/r/aee34b87a5e4afe586c2ac6a0b32db8dc4dcc2dc.1606162397.git.andreyknvl@google.com
Link: https://linux-review.googlesource.com/id/Icd947e2bea054cb5cfbdc6cf6652227d97032dcb
Co-developed-by: Vincenzo Frascino <Vincenzo.Frascino@arm.com>
Signed-off-by: Vincenzo Frascino <Vincenzo.Frascino@arm.com>
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Reviewed-by: Marco Elver <elver@google.com>
Tested-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Branislav Rankov <Branislav.Rankov@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Evgenii Stepanov <eugenis@google.com>
Cc: Kevin Brodsky <kevin.brodsky@arm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Using kasan_reset_tag() currently results in a function call. As it's
called quite often from the allocator code, this leads to a noticeable
slowdown. Move it to include/linux/kasan.h and turn it into a static
inline function. Also remove the now unneeded reset_tag() internal KASAN
macro and use kasan_reset_tag() instead.
Link: https://lkml.kernel.org/r/6940383a3a9dfb416134d338d8fac97a9ebb8686.1606162397.git.andreyknvl@google.com
Link: https://linux-review.googlesource.com/id/I4d2061acfe91d480a75df00b07c22d8494ef14b5
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Reviewed-by: Marco Elver <elver@google.com>
Reviewed-by: Dmitry Vyukov <dvyukov@google.com>
Tested-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Branislav Rankov <Branislav.Rankov@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Evgenii Stepanov <eugenis@google.com>
Cc: Kevin Brodsky <kevin.brodsky@arm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Provide implementation of KASAN functions required for the hardware
tag-based mode. Those include core functions for memory and pointer
tagging (tags_hw.c) and bug reporting (report_tags_hw.c). Also adapt
common KASAN code to support the new mode.
Link: https://lkml.kernel.org/r/cfd0fbede579a6b66755c98c88c108e54f9c56bf.1606161801.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Alexander Potapenko <glider@google.com>
Tested-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Branislav Rankov <Branislav.Rankov@arm.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Evgenii Stepanov <eugenis@google.com>
Cc: Kevin Brodsky <kevin.brodsky@arm.com>
Cc: Marco Elver <elver@google.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Software tag-based KASAN mode is fully initialized with kasan_init_tags(),
while the generic mode only requires kasan_init(). Move the
initialization message for tag-based mode into kasan_init_tags().
Also fix pr_fmt() usage for KASAN code: generic.c doesn't need it as it
doesn't use any printing functions; tag-based mode should use "kasan:"
instead of KBUILD_MODNAME (which stands for file name).
Link: https://lkml.kernel.org/r/29a30ea4e1750450dd1f693d25b7b6cb05913ecf.1606161801.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Alexander Potapenko <glider@google.com>
Tested-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Branislav Rankov <Branislav.Rankov@arm.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Evgenii Stepanov <eugenis@google.com>
Cc: Kevin Brodsky <kevin.brodsky@arm.com>
Cc: Marco Elver <elver@google.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This is a preparatory commit for the upcoming addition of a new hardware
tag-based (MTE-based) KASAN mode.
For software KASAN modes the check is based on the value in the shadow
memory. Hardware tag-based KASAN won't be using shadow, so hide the
implementation of the check in check_invalid_free().
Also simplify the code for software tag-based mode.
No functional changes for software modes.
Link: https://lkml.kernel.org/r/d01534a4b977f97d87515dc590e6348e1406de81.1606161801.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Reviewed-by: Marco Elver <elver@google.com>
Reviewed-by: Alexander Potapenko <glider@google.com>
Tested-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Branislav Rankov <Branislav.Rankov@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Evgenii Stepanov <eugenis@google.com>
Cc: Kevin Brodsky <kevin.brodsky@arm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Rename generic_report.c to report_generic.c and tags_report.c to
report_sw_tags.c, as their content is more relevant to report.c file.
Also rename tags.c to sw_tags.c to better reflect that this file contains
code for software tag-based mode.
No functional changes.
Link: https://lkml.kernel.org/r/a6105d416da97d389580015afed66c4c3cfd4c08.1606161801.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Reviewed-by: Marco Elver <elver@google.com>
Reviewed-by: Alexander Potapenko <glider@google.com>
Tested-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Branislav Rankov <Branislav.Rankov@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Evgenii Stepanov <eugenis@google.com>
Cc: Kevin Brodsky <kevin.brodsky@arm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Arnd Bergmann