Commit Graph

27 Commits

Author SHA1 Message Date
Dennis Zhou 93274f1dd6 percpu: flush tlb in pcpu_reclaim_populated()
Prior to "percpu: implement partial chunk depopulation",
pcpu_depopulate_chunk() was called only on the destruction path. This
meant the virtual address range was on its way back to vmalloc which
will handle flushing the tlbs for us.

However, with pcpu_reclaim_populated(), we are now calling
pcpu_depopulate_chunk() during the active lifecycle of a chunk.
Therefore, we need to flush the tlb as well otherwise we can end up
accessing the wrong page through an invalid tlb mapping as reported in
[1].

[1] https://lore.kernel.org/lkml/20210702191140.GA3166599@roeck-us.net/

Fixes: f183324133 ("percpu: implement partial chunk depopulation")
Reported-and-tested-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Dennis Zhou <dennis@kernel.org>
2021-07-04 18:30:17 +00:00
Linus Torvalds e267992f9e Merge branch 'for-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/dennis/percpu
Pull percpu updates from Dennis Zhou:

 - percpu chunk depopulation - depopulate backing pages for chunks with
   empty pages when we exceed a global threshold without those pages.
   This lets us reclaim a portion of memory that would previously be
   lost until the full chunk would be freed (possibly never).

 - memcg accounting cleanup - previously separate chunks were managed
   for normal allocations and __GFP_ACCOUNT allocations. These are now
   consolidated which cleans up the code quite a bit.

 - a few misc clean ups for clang warnings

* 'for-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/dennis/percpu:
  percpu: optimize locking in pcpu_balance_workfn()
  percpu: initialize best_upa variable
  percpu: rework memcg accounting
  mm, memcg: introduce mem_cgroup_kmem_disabled()
  mm, memcg: mark cgroup_memory_nosocket, nokmem and noswap as __ro_after_init
  percpu: make symbol 'pcpu_free_slot' static
  percpu: implement partial chunk depopulation
  percpu: use pcpu_free_slot instead of pcpu_nr_slots - 1
  percpu: factor out pcpu_check_block_hint()
  percpu: split __pcpu_balance_workfn()
  percpu: fix a comment about the chunks ordering
2021-07-01 17:17:24 -07:00
Roman Gushchin faf65dde84 percpu: rework memcg accounting
The current implementation of the memcg accounting of the percpu
memory is based on the idea of having two separate sets of chunks for
accounted and non-accounted memory. This approach has an advantage
of not wasting any extra memory for memcg data for non-accounted
chunks, however it complicates the code and leads to a higher chunks
number due to a lower chunk utilization.

Instead of having two chunk types it's possible to declare all* chunks
memcg-aware unless the kernel memory accounting is disabled globally
by a boot option. The size of objcg_array is usually small in
comparison to chunks themselves (it obviously depends on the number of
CPUs), so even if some chunk will have no accounted allocations, the
memory waste isn't significant and will likely be compensated by
a higher chunk utilization. Also, with time more and more percpu
allocations will likely become accounted.

* The first chunk is initialized before the memory cgroup subsystem,
  so we don't know for sure whether we need to allocate obj_cgroups.
  Because it's small, let's make it free for use. Then we don't need
  to allocate obj_cgroups for it.

Signed-off-by: Roman Gushchin <guro@fb.com>
Signed-off-by: Dennis Zhou <dennis@kernel.org>
2021-06-05 20:43:15 +00:00
Nicholas Piggin 4ad0ae8c64 mm/vmalloc: remove unmap_kernel_range
This is a shim around vunmap_range, get rid of it.

Move the main API comment from the _noflush variant to the normal
variant, and make _noflush internal to mm/.

[npiggin@gmail.com: fix nommu builds and a comment bug per sfr]
  Link: https://lkml.kernel.org/r/1617292598.m6g0knx24s.astroid@bobo.none
[akpm@linux-foundation.org: move vunmap_range_noflush() stub inside !CONFIG_MMU, not !CONFIG_NUMA]
[npiggin@gmail.com: fix nommu builds]
  Link: https://lkml.kernel.org/r/1617292497.o1uhq5ipxp.astroid@bobo.none

Link: https://lkml.kernel.org/r/20210322021806.892164-5-npiggin@gmail.com
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Cédric Le Goater <clg@kaod.org>
Cc: Uladzislau Rezki <urezki@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-04-30 11:20:40 -07:00
Nicholas Piggin b67177ecd9 mm/vmalloc: remove map_kernel_range
Patch series "mm/vmalloc: cleanup after hugepage series", v2.

Christoph pointed out some overdue cleanups required after the huge
vmalloc series, and I had another failure error message improvement as
well.

This patch (of 5):

This is a shim around vmap_pages_range, get rid of it.

Move the main API comment from the _noflush variant to the normal variant,
and make _noflush internal to mm/.

Link: https://lkml.kernel.org/r/20210322021806.892164-1-npiggin@gmail.com
Link: https://lkml.kernel.org/r/20210322021806.892164-2-npiggin@gmail.com
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Uladzislau Rezki <urezki@gmail.com>
Cc: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-04-30 11:20:40 -07:00
Roman Gushchin f183324133 percpu: implement partial chunk depopulation
From Roman ("percpu: partial chunk depopulation"):
In our [Facebook] production experience the percpu memory allocator is
sometimes struggling with returning the memory to the system. A typical
example is a creation of several thousands memory cgroups (each has
several chunks of the percpu data used for vmstats, vmevents,
ref counters etc). Deletion and complete releasing of these cgroups
doesn't always lead to a shrinkage of the percpu memory, so that
sometimes there are several GB's of memory wasted.

The underlying problem is the fragmentation: to release an underlying
chunk all percpu allocations should be released first. The percpu
allocator tends to top up chunks to improve the utilization. It means
new small-ish allocations (e.g. percpu ref counters) are placed onto
almost filled old-ish chunks, effectively pinning them in memory.

This patchset solves this problem by implementing a partial depopulation
of percpu chunks: chunks with many empty pages are being asynchronously
depopulated and the pages are returned to the system.

To illustrate the problem the following script can be used:
--

cd /sys/fs/cgroup

mkdir percpu_test
echo "+memory" > percpu_test/cgroup.subtree_control

cat /proc/meminfo | grep Percpu

for i in `seq 1 1000`; do
    mkdir percpu_test/cg_"${i}"
    for j in `seq 1 10`; do
	mkdir percpu_test/cg_"${i}"_"${j}"
    done
done

cat /proc/meminfo | grep Percpu

for i in `seq 1 1000`; do
    for j in `seq 1 10`; do
	rmdir percpu_test/cg_"${i}"_"${j}"
    done
done

sleep 10

cat /proc/meminfo | grep Percpu

for i in `seq 1 1000`; do
    rmdir percpu_test/cg_"${i}"
done

rmdir percpu_test
--

It creates 11000 memory cgroups and removes every 10 out of 11.
It prints the initial size of the percpu memory, the size after
creating all cgroups and the size after deleting most of them.

Results:
  vanilla:
    ./percpu_test.sh
    Percpu:             7488 kB
    Percpu:           481152 kB
    Percpu:           481152 kB

  with this patchset applied:
    ./percpu_test.sh
    Percpu:             7488 kB
    Percpu:           481408 kB
    Percpu:           135552 kB

The total size of the percpu memory was reduced by more than 3.5 times.

This patch:

This patch implements partial depopulation of percpu chunks.

As of now, a chunk can be depopulated only as a part of the final
destruction, if there are no more outstanding allocations. However
to minimize a memory waste it might be useful to depopulate a
partially filed chunk, if a small number of outstanding allocations
prevents the chunk from being fully reclaimed.

This patch implements the following depopulation process: it scans
over the chunk pages, looks for a range of empty and populated pages
and performs the depopulation. To avoid races with new allocations,
the chunk is previously isolated. After the depopulation the chunk is
sidelined to a special list or freed. New allocations prefer using
active chunks to sidelined chunks. If a sidelined chunk is used, it is
reintegrated to the active lists.

The depopulation is scheduled on the free path if the chunk is all of
the following:
  1) has more than 1/4 of total pages free and populated
  2) the system has enough free percpu pages aside of this chunk
  3) isn't the reserved chunk
  4) isn't the first chunk
If it's already depopulated but got free populated pages, it's a good
target too. The chunk is moved to a special slot,
pcpu_to_depopulate_slot, chunk->isolated is set, and the balance work
item is scheduled. On isolation, these pages are removed from the
pcpu_nr_empty_pop_pages. It is constantly replaced to the
to_depopulate_slot when it meets these qualifications.

pcpu_reclaim_populated() iterates over the to_depopulate_slot until it
becomes empty. The depopulation is performed in the reverse direction to
keep populated pages close to the beginning. Depopulated chunks are
sidelined to preferentially avoid them for new allocations. When no
active chunk can suffice a new allocation, sidelined chunks are first
checked before creating a new chunk.

Signed-off-by: Roman Gushchin <guro@fb.com>
Co-developed-by: Dennis Zhou <dennis@kernel.org>
Signed-off-by: Dennis Zhou <dennis@kernel.org>
Tested-by: Pratik Sampat <psampat@linux.ibm.com>
Signed-off-by: Dennis Zhou <dennis@kernel.org>
2021-04-21 18:17:40 +00:00
Roman Gushchin 3c7be18ac9 mm: memcg/percpu: account percpu memory to memory cgroups
Percpu memory is becoming more and more widely used by various subsystems,
and the total amount of memory controlled by the percpu allocator can make
a good part of the total memory.

As an example, bpf maps can consume a lot of percpu memory, and they are
created by a user.  Also, some cgroup internals (e.g.  memory controller
statistics) can be quite large.  On a machine with many CPUs and big
number of cgroups they can consume hundreds of megabytes.

So the lack of memcg accounting is creating a breach in the memory
isolation.  Similar to the slab memory, percpu memory should be accounted
by default.

To implement the perpcu accounting it's possible to take the slab memory
accounting as a model to follow.  Let's introduce two types of percpu
chunks: root and memcg.  What makes memcg chunks different is an
additional space allocated to store memcg membership information.  If
__GFP_ACCOUNT is passed on allocation, a memcg chunk should be be used.
If it's possible to charge the corresponding size to the target memory
cgroup, allocation is performed, and the memcg ownership data is recorded.
System-wide allocations are performed using root chunks, so there is no
additional memory overhead.

To implement a fast reparenting of percpu memory on memcg removal, we
don't store mem_cgroup pointers directly: instead we use obj_cgroup API,
introduced for slab accounting.

[akpm@linux-foundation.org: fix CONFIG_MEMCG_KMEM=n build errors and warning]
[akpm@linux-foundation.org: move unreachable code, per Roman]
[cuibixuan@huawei.com: mm/percpu: fix 'defined but not used' warning]
  Link: http://lkml.kernel.org/r/6d41b939-a741-b521-a7a2-e7296ec16219@huawei.com

Signed-off-by: Roman Gushchin <guro@fb.com>
Signed-off-by: Bixuan Cui <cuibixuan@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Acked-by: Dennis Zhou <dennis@kernel.org>
Cc: Christoph Lameter <cl@linux.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Tobin C. Harding <tobin@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Waiman Long <longman@redhat.com>
Cc: Bixuan Cui <cuibixuan@huawei.com>
Cc: Michal Koutný <mkoutny@suse.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Link: http://lkml.kernel.org/r/20200623184515.4132564-3-guro@fb.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-08-12 10:57:55 -07:00
Thomas Gleixner 55716d2643 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 428
Based on 1 normalized pattern(s):

  this file is released under the gplv2

extracted by the scancode license scanner the SPDX license identifier

  GPL-2.0-only

has been chosen to replace the boilerplate/reference in 68 file(s).

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Armijn Hemel <armijn@tjaldur.nl>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190531190114.292346262@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-05 17:37:16 +02:00
Dennis Zhou 554fef1c39 percpu: allow select gfp to be passed to underlying allocators
The prior patch added support for passing gfp flags through to the
underlying allocators. This patch allows users to pass along gfp flags
(currently only __GFP_NORETRY and __GFP_NOWARN) to the underlying
allocators. This should allow users to decide if they are ok with
failing allocations recovering in a more graceful way.

Additionally, gfp passing was done as additional flags in the previous
patch. Instead, change this to caller passed semantics. GFP_KERNEL is
also removed as the default flag. It continues to be used for internally
caused underlying percpu allocations.

V2:
Removed gfp_percpu_mask in favor of doing it inline.
Removed GFP_KERNEL as a default flag for __alloc_percpu_gfp.

Signed-off-by: Dennis Zhou <dennisszhou@gmail.com>
Suggested-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Christoph Lameter <cl@linux.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2018-02-18 05:33:01 -08:00
Dennis Zhou 47504ee04b percpu: add __GFP_NORETRY semantics to the percpu balancing path
Percpu memory using the vmalloc area based chunk allocator lazily
populates chunks by first requesting the full virtual address space
required for the chunk and subsequently adding pages as allocations come
through. To ensure atomic allocations can succeed, a workqueue item is
used to maintain a minimum number of empty pages. In certain scenarios,
such as reported in [1], it is possible that physical memory becomes
quite scarce which can result in either a rather long time spent trying
to find free pages or worse, a kernel panic.

This patch adds support for __GFP_NORETRY and __GFP_NOWARN passing them
through to the underlying allocators. This should prevent any
unnecessary panics potentially caused by the workqueue item. The passing
of gfp around is as additional flags rather than a full set of flags.
The next patch will change these to caller passed semantics.

V2:
Added const modifier to gfp flags in the balance path.
Removed an extra whitespace.

[1] https://lkml.org/lkml/2018/2/12/551

Signed-off-by: Dennis Zhou <dennisszhou@gmail.com>
Suggested-by: Daniel Borkmann <daniel@iogearbox.net>
Reported-by: syzbot+adb03f3f0bb57ce3acda@syzkaller.appspotmail.com
Acked-by: Christoph Lameter <cl@linux.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2018-02-18 05:33:00 -08:00
Mel Gorman 453f85d43f mm: remove __GFP_COLD
As the page free path makes no distinction between cache hot and cold
pages, there is no real useful ordering of pages in the free list that
allocation requests can take advantage of.  Juding from the users of
__GFP_COLD, it is likely that a number of them are the result of copying
other sites instead of actually measuring the impact.  Remove the
__GFP_COLD parameter which simplifies a number of paths in the page
allocator.

This is potentially controversial but bear in mind that the size of the
per-cpu pagelists versus modern cache sizes means that the whole per-cpu
list can often fit in the L3 cache.  Hence, there is only a potential
benefit for microbenchmarks that alloc/free pages in a tight loop.  It's
even worse when THP is taken into account which has little or no chance
of getting a cache-hot page as the per-cpu list is bypassed and the
zeroing of multiple pages will thrash the cache anyway.

The truncate microbenchmarks are not shown as this patch affects the
allocation path and not the free path.  A page fault microbenchmark was
tested but it showed no sigificant difference which is not surprising
given that the __GFP_COLD branches are a miniscule percentage of the
fault path.

Link: http://lkml.kernel.org/r/20171018075952.10627-9-mgorman@techsingularity.net
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-11-15 18:21:06 -08:00
Dennis Zhou e3efe3db93 percpu: fix static checker warnings in pcpu_destroy_chunk
From 5021b97f4026334d2c8dfad80797dd1028cddd73 Mon Sep 17 00:00:00 2001
From: Dennis Zhou <dennisz@fb.com>
Date: Thu, 29 Jun 2017 07:11:41 -0700

Add NULL check in pcpu_destroy_chunk to correct static checker warnings.

Signed-off-by: Dennis Zhou <dennisz@fb.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2017-06-29 11:23:38 -04:00
Dennis Zhou df95e795a7 percpu: add tracepoint support for percpu memory
Add support for tracepoints to the following events: chunk allocation,
chunk free, area allocation, area free, and area allocation failure.
This should let us replay percpu memory requests and evaluate
corresponding decisions.

Signed-off-by: Dennis Zhou <dennisz@fb.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2017-06-20 15:31:43 -04:00
Dennis Zhou 30a5b5367e percpu: expose statistics about percpu memory via debugfs
There is limited visibility into the use of percpu memory leaving us
unable to reason about correctness of parameters and overall use of
percpu memory. These counters and statistics aim to help understand
basic statistics about percpu memory such as number of allocations over
the lifetime, allocation sizes, and fragmentation.

New Config: PERCPU_STATS

Signed-off-by: Dennis Zhou <dennisz@fb.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2017-06-20 15:31:38 -04:00
Tahsin Erdogan 8a1df543de percpu: remove unused chunk_alloc parameter from pcpu_get_pages()
pcpu_get_pages() doesn't use chunk_alloc parameter, remove it.

Fixes: fbbb7f4e14 ("percpu: remove the usage of separate populated bitmap in percpu-vm")
Signed-off-by: Tahsin Erdogan <tahsin@google.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2017-03-06 15:56:55 -05:00
Tejun Heo a93ace487a percpu: move region iterations out of pcpu_[de]populate_chunk()
Previously, pcpu_[de]populate_chunk() were called with the range which
may contain multiple target regions in it and
pcpu_[de]populate_chunk() iterated over the regions.  This has the
benefit of batching up cache flushes for all the regions; however,
we're planning to add more bookkeeping logic around [de]population to
support atomic allocations and this delegation of iterations gets in
the way.

This patch moves the region iterations out of
pcpu_[de]populate_chunk() into its callers - pcpu_alloc() and
pcpu_reclaim() - so that we can later add logic to track more states
around them.  This change may make cache and tlb flushes more frequent
but multi-region [de]populations are rare anyway and if this actually
becomes a problem, it's not difficult to factor out cache flushes as
separate callbacks which are directly invoked from percpu.c.

Signed-off-by: Tejun Heo <tj@kernel.org>
2014-09-02 14:46:02 -04:00
Tejun Heo dca496451b percpu: move common parts out of pcpu_[de]populate_chunk()
percpu-vm and percpu-km implement separate versions of
pcpu_[de]populate_chunk() and some part which is or should be common
are currently in the specific implementations.  Make the following
changes.

* Allocate area clearing is moved from the pcpu_populate_chunk()
  implementations to pcpu_alloc().  This makes percpu-km's version
  noop.

* Quick exit tests in pcpu_[de]populate_chunk() of percpu-vm are moved
  to their respective callers so that they are applied to percpu-km
  too.  This doesn't make any meaningful difference as both functions
  are noop for percpu-km; however, this is more consistent and will
  help implementing atomic allocation support.

Signed-off-by: Tejun Heo <tj@kernel.org>
2014-09-02 14:46:01 -04:00
Tejun Heo cdb4cba5a3 percpu: remove @may_alloc from pcpu_get_pages()
pcpu_get_pages() creates the temp pages array if not already allocated
and returns the pointer to it.  As the function is called from both
[de]population paths and depopulation can only happen after at least
one successful population, the param doesn't make any difference - the
allocation will always happen on the population path anyway.

Remove @may_alloc from pcpu_get_pages().  Also, add an lockdep
assertion pcpu_alloc_mutex instead of vaguely stating that the
exclusion is the caller's responsibility.

Signed-off-by: Tejun Heo <tj@kernel.org>
2014-09-02 14:46:01 -04:00
Tejun Heo fbbb7f4e14 percpu: remove the usage of separate populated bitmap in percpu-vm
percpu-vm uses pcpu_get_pages_and_bitmap() to acquire temp pages array
and populated bitmap and uses the two during [de]population.  The temp
bitmap is used only to build the new bitmap that is copied to
chunk->populated after the operation succeeds; however, the new bitmap
can be trivially set after success without using the temp bitmap.

This patch removes the temp populated bitmap usage from percpu-vm.c.

* pcpu_get_pages_and_bitmap() is renamed to pcpu_get_pages() and no
  longer hands out the temp bitmap.

* @populated arugment is dropped from all the related functions.
  @populated updates in pcpu_[un]map_pages() are dropped.

* Two loops in pcpu_map_pages() are merged.

* pcpu_[de]populated_chunk() modify chunk->populated bitmap directly
  from @page_start and @page_end after success.

Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Christoph Lameter <cl@linux.com>
2014-09-02 14:46:01 -04:00
Tejun Heo 849f516909 percpu: perform tlb flush after pcpu_map_pages() failure
If pcpu_map_pages() fails midway, it unmaps the already mapped pages.
Currently, it doesn't flush tlb after the partial unmapping.  This may
be okay in most cases as the established mapping hasn't been used at
that point but it can go wrong and when it goes wrong it'd be
extremely difficult to track down.

Flush tlb after the partial unmapping.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: stable@vger.kernel.org
2014-08-15 16:06:10 -04:00
Tejun Heo f0d279654d percpu: fix pcpu_alloc_pages() failure path
When pcpu_alloc_pages() fails midway, pcpu_free_pages() is invoked to
free what has already been allocated.  The invocation is across the
whole requested range and pcpu_free_pages() will try to free all
non-NULL pages; unfortunately, this is incorrect as
pcpu_get_pages_and_bitmap(), unlike what its comment suggests, doesn't
clear the pages array and thus the array may have entries from the
previous invocations making the partial failure path free incorrect
pages.

Fix it by open-coding the partial freeing of the already allocated
pages.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: stable@vger.kernel.org
2014-08-15 16:06:06 -04:00
Wanpeng Li dad7557eb7 mm: fix kernel-doc warnings
Fix kernel-doc warnings such as

  Warning(../mm/page_cgroup.c:432): No description found for parameter 'id'
  Warning(../mm/page_cgroup.c:432): Excess function parameter 'mem' description in 'swap_cgroup_record'

Signed-off-by: Wanpeng Li <liwp@linux.vnet.ibm.com>
Cc: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-06-20 14:39:36 -07:00
Akinobu Mita 26dd8e0291 percpu: use bitmap_clear
Use bitmap_clear rather than clearing individual bits in a memory region.

Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Acked-by: Christoph Lameter <cl@linux-foundation.org>
Signed-off-by: Tejun Heo <tj@kernel.org>
2012-01-20 09:23:16 -08:00
Tejun Heo a855b84c3d percpu: fix chunk range calculation
Percpu allocator recorded the cpus which map to the first and last
units in pcpu_first/last_unit_cpu respectively and used them to
determine the address range of a chunk - e.g. it assumed that the
first unit has the lowest address in a chunk while the last unit has
the highest address.

This simply isn't true.  Groups in a chunk can have arbitrary positive
or negative offsets from the previous one and there is no guarantee
that the first unit occupies the lowest offset while the last one the
highest.

Fix it by actually comparing unit offsets to determine cpus occupying
the lowest and highest offsets.  Also, rename pcu_first/last_unit_cpu
to pcpu_low/high_unit_cpu to avoid confusion.

The chunk address range is used to flush cache on vmalloc area
map/unmap and decide whether a given address is in the first chunk by
per_cpu_ptr_to_phys() and the bug was discovered by invalid
per_cpu_ptr_to_phys() translation for crash_note.

Kudos to Dave Young for tracking down the problem.

Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: WANG Cong <xiyou.wangcong@gmail.com>
Reported-by: Dave Young <dyoung@redhat.com>
Tested-by: Dave Young <dyoung@redhat.com>
LKML-Reference: <4EC21F67.10905@redhat.com>
Cc: stable @kernel.org
2011-11-22 08:09:46 -08:00
Bob Liu 90459ce06f percpu: rename pcpu_mem_alloc to pcpu_mem_zalloc
Currently pcpu_mem_alloc() is implemented always return zeroed memory.
So rename it to make user like pcpu_get_pages_and_bitmap() know don't
reinit it.

Signed-off-by: Bob Liu <lliubbo@gmail.com>
Reviewed-by: Pekka Enberg <penberg@kernel.org>
Reviewed-by: Michal Hocko <mhocko@suse.cz>
Signed-off-by: Tejun Heo <tj@kernel.org>
2011-11-22 08:09:41 -08:00
David Rientjes ec3f64fc9c mm: remove gfp mask from pcpu_get_vm_areas
pcpu_get_vm_areas() only uses GFP_KERNEL allocations, so remove the gfp_t
formal and use the mask internally.

Signed-off-by: David Rientjes <rientjes@google.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-01-13 17:32:34 -08:00
Tejun Heo 9f64553256 percpu: move vmalloc based chunk management into percpu-vm.c
Separate out and move chunk management (creation/desctruction and
[de]population) code into percpu-vm.c which is included by percpu.c
and compiled together.  The interface for chunk management is defined
as follows.

 * pcpu_populate_chunk		- populate the specified range of a chunk
 * pcpu_depopulate_chunk	- depopulate the specified range of a chunk
 * pcpu_create_chunk		- create a new chunk
 * pcpu_destroy_chunk		- destroy a chunk, always preceded by full depop
 * pcpu_addr_to_page		- translate address to physical address
 * pcpu_verify_alloc_info	- check alloc_info is acceptable during init

Other than wrapping vmalloc_to_page() inside pcpu_addr_to_page() and
dummy pcpu_verify_alloc_info() implementation, this patch only moves
code around.  This separation is to allow alternate chunk management
implementation.

Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: David Howells <dhowells@redhat.com>
Cc: Graff Yang <graff.yang@gmail.com>
Cc: Sonic Zhang <sonic.adi@gmail.com>
2010-05-01 08:30:50 +02:00