Revert following commits:
commit acec05fb78 ("net_tstamp: Add TIMESTAMPING SOFTWARE and HARDWARE mask")
commit 11d55be06d ("net: ethtool: Add a command to expose current time stamping layer")
commit bb8645b00c ("netlink: specs: Introduce new netlink command to get current timestamp")
commit d905f9c753 ("net: ethtool: Add a command to list available time stamping layers")
commit aed5004ee7 ("netlink: specs: Introduce new netlink command to list available time stamping layers")
commit 51bdf3165f ("net: Replace hwtstamp_source by timestamping layer")
commit 0f7f463d48 ("net: Change the API of PHY default timestamp to MAC")
commit 091fab1228 ("net: ethtool: ts: Update GET_TS to reply the current selected timestamp")
commit 152c75e1d0 ("net: ethtool: ts: Let the active time stamping layer be selectable")
commit ee60ea6be0 ("netlink: specs: Introduce time stamping set command")
They need more time for reviews.
Link: https://lore.kernel.org/all/20231118183529.6e67100c@kernel.org/
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Change the API to select MAC default time stamping instead of the PHY.
Indeed the PHY is closer to the wire therefore theoretically it has less
delay than the MAC timestamping but the reality is different. Due to lower
time stamping clock frequency, latency in the MDIO bus and no PHC hardware
synchronization between different PHY, the PHY PTP is often less precise
than the MAC. The exception is for PHY designed specially for PTP case but
these devices are not very widespread. For not breaking the compatibility I
introduce a default_timestamp flag in phy_device that is set by the phy
driver to know we are using the old API behavior.
The phy_set_timestamp function is called at each call of phy_attach_direct.
In case of MAC driver using phylink this function is called when the
interface is turned up. Then if the interface goes down and up again the
last choice of timestamp will be overwritten by the default choice.
A solution could be to cache the timestamp status but it can bring other
issues. In case of SFP, if we change the module, it doesn't make sense to
blindly re-set the timestamp back to PHY, if the new module has a PHY with
mediocre timestamping capabilities.
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Replace hwtstamp_source which is only used by the kernel_hwtstamp_config
structure by the more widely use timestamp_layer structure. This is done
to prepare the support of selectable timestamping source.
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Make the dev_set_hwtstamp_phylib function accessible in prevision to use
it from ethtool to reset the tstamp current configuration.
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Use more inclusive terms throughout the DSA subsystem by moving away
from "master" which is replaced by "conduit" and "slave" which is
replaced by "user". No functional changes.
Acked-by: Rob Herring <robh@kernel.org>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://lore.kernel.org/r/20231023181729.1191071-2-florian.fainelli@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Setting dev->priv_flags & IFF_SEE_ALL_HWTSTAMP_REQUESTS is only legal
for drivers which were converted to ndo_hwtstamp_get() and
ndo_hwtstamp_set(), and it is only there that we call ndo_hwtstamp_set()
for a request that otherwise goes to phylib (for stuff like packet traps,
which need to be undone if phylib failed, hence the old_cfg logic).
The problem is that we end up calling ndo_hwtstamp_get() when we don't
need to (even if the SIOCSHWTSTAMP wasn't intended for phylib, or if it
was, but the driver didn't set IFF_SEE_ALL_HWTSTAMP_REQUESTS). For those
unnecessary conditions, we share a code path with virtual drivers (vlan,
macvlan, bonding) where ndo_hwtstamp_get() is implemented as
generic_hwtstamp_get_lower(), and may be resolved through
generic_hwtstamp_ioctl_lower() if the lower device is unconverted.
I.e. this situation:
$ ip link add link eno0 name eno0.100 type vlan id 100
$ hwstamp_ctl -i eno0.100 -t 1
We are unprepared to deal with this, because if ndo_hwtstamp_get() is
resolved through a legacy ndo_eth_ioctl(SIOCGHWTSTAMP) lower_dev
implementation, that needs a non-NULL old_cfg.ifr pointer, and we don't
have it.
But we don't even need to deal with it either. In the general case,
drivers may not even implement SIOCGHWTSTAMP handling, only SIOCSHWTSTAMP,
so it makes sense to completely avoid a SIOCGHWTSTAMP call if we can.
The solution is to split the single "if" condition into 3 smaller ones,
thus separating the decision to call ndo_hwtstamp_get() from the
decision to call ndo_hwtstamp_set(). The third "if" condition is
identical to the first one, and both are subsets of the second one.
Thus, the "cfg" argument of kernel_hwtstamp_config_changed() is always
valid.
Reported-by: Eric Dumazet <edumazet@google.com>
Closes: https://lore.kernel.org/netdev/CANn89iLOspJsvjPj+y8jikg7erXDomWe8sqHMdfL_2LQSFrPAg@mail.gmail.com/
Fixes: fd770e856e ("net: remove phy_has_hwtstamp() -> phy_mii_ioctl() decision from converted drivers")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
It is desirable that the new .ndo_hwtstamp_set() API gives more
uniformity, less overhead and future flexibility w.r.t. the PHY
timestamping behavior.
Currently there are some drivers which allow PHY timestamping through
the procedure mentioned in Documentation/networking/timestamping.rst.
They don't do anything locally if phy_has_hwtstamp() is set, except for
lan966x which installs PTP packet traps.
Centralize that behavior in a new dev_set_hwtstamp_phylib() code
function, which calls either phy_mii_ioctl() for the phylib PHY,
or .ndo_hwtstamp_set() of the netdev, based on a single policy
(currently simplistic: phy_has_hwtstamp()).
Any driver converted to .ndo_hwtstamp_set() will automatically opt into
the centralized phylib timestamping policy. Unconverted drivers still
get to choose whether they let the PHY handle timestamping or not.
Netdev drivers with integrated PHY drivers that don't use phylib
presumably don't set dev->phydev, and those will always see
HWTSTAMP_SOURCE_NETDEV requests even when converted. The timestamping
policy will remain 100% up to them.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Link: https://lore.kernel.org/r/20230801142824.1772134-13-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The stackable net devices with hwtstamping support (vlan, macvlan,
bonding) only pass the hwtstamping ops to the lower (real) device.
These drivers are the first that need to be converted to the new
timestamping API, because if they aren't prepared to handle that,
then no real device driver cannot be converted to the new API either.
After studying what vlan_dev_ioctl(), macvlan_eth_ioctl() and
bond_eth_ioctl() have in common, here we propose two generic
implementations of ndo_hwtstamp_get() and ndo_hwtstamp_set() which
can be called by those 3 drivers, with "dev" being their lower device.
These helpers cover both cases, when the lower driver is converted to
the new API or unconverted.
We need some hacks in case of an unconverted driver, namely to stuff
some pointers in struct kernel_hwtstamp_config which shouldn't have
been there (since the new API isn't supposed to need it). These will
be removed when all drivers will have been converted to the new API.
Signed-off-by: Maxim Georgiev <glipus@gmail.com>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://lore.kernel.org/r/20230801142824.1772134-3-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Current hardware timestamping API for NICs requires implementing
.ndo_eth_ioctl() for SIOCGHWTSTAMP and SIOCSHWTSTAMP.
That API has some boilerplate such as request parameter translation
between user and kernel address spaces, handling possible translation
failures correctly, etc. Since it is the same all across the board, it
would be desirable to handle it through generic code.
Here we introduce .ndo_hwtstamp_get() and .ndo_hwtstamp_set(), which
implement that boilerplate and allow drivers to just act upon requests.
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Maxim Georgiev <glipus@gmail.com>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Link: https://lore.kernel.org/r/20230801142824.1772134-2-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
There was a sort of rush surrounding commit 88c0a6b503 ("net: create a
netdev notifier for DSA to reject PTP on DSA master"), due to a desire
to convert DSA's attempt to deny TX timestamping on a DSA master to
something that doesn't block the kernel-wide API conversion from
ndo_eth_ioctl() to ndo_hwtstamp_set().
What was required was a mechanism that did not depend on ndo_eth_ioctl(),
and what was provided was a mechanism that did not depend on
ndo_eth_ioctl(), while at the same time introducing something that
wasn't absolutely necessary - a new netdev notifier.
There have been objections from Jakub Kicinski that using notifiers in
general when they are not absolutely necessary creates complications to
the control flow and difficulties to maintainers who look at the code.
So there is a desire to not use notifiers.
In addition to that, the notifier chain gets called even if there is no
DSA in the system and no one is interested in applying any restriction.
Take the model of udp_tunnel_nic_ops and introduce a stub mechanism,
through which net/core/dev_ioctl.c can call into DSA even when
CONFIG_NET_DSA=m.
Compared to the code that existed prior to the notifier conversion, aka
what was added in commits:
- 4cfab35667 ("net: dsa: Add wrappers for overloaded ndo_ops")
- 3369afba1e ("net: Call into DSA netdevice_ops wrappers")
this is different because we are not overloading any struct
net_device_ops of the DSA master anymore, but rather, we are exposing a
rather specific functionality which is orthogonal to which API is used
to enable it - ndo_eth_ioctl() or ndo_hwtstamp_set().
Also, what is similar is that both approaches use function pointers to
get from built-in code to DSA.
There is no point in replicating the function pointers towards
__dsa_master_hwtstamp_validate() once for every CPU port (dev->dsa_ptr).
Instead, it is sufficient to introduce a singleton struct dsa_stubs,
built into the kernel, which contains a single function pointer to
__dsa_master_hwtstamp_validate().
I find this approach preferable to what we had originally, because
dev->dsa_ptr->netdev_ops->ndo_do_ioctl() used to require going through
struct dsa_port (dev->dsa_ptr), and so, this was incompatible with any
attempts to add any data encapsulation and hide DSA data structures from
the outside world.
Link: https://lore.kernel.org/netdev/20230403083019.120b72fd@kernel.org/
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The fact that PTP 2-step TX timestamping is broken on DSA switches if
the master also timestamps the same packets is documented by commit
f685e609a3 ("net: dsa: Deny PTP on master if switch supports it").
We attempt to help the users avoid shooting themselves in the foot by
making DSA reject the timestamping ioctls on an interface that is a DSA
master, and the switch tree beneath it contains switches which are aware
of PTP.
The only problem is that there isn't an established way of intercepting
ndo_eth_ioctl calls, so DSA creates avoidable burden upon the network
stack by creating a struct dsa_netdevice_ops with overlaid function
pointers that are manually checked from the relevant call sites. There
used to be 2 such dsa_netdevice_ops, but now, ndo_eth_ioctl is the only
one left.
There is an ongoing effort to migrate driver-visible hardware timestamping
control from the ndo_eth_ioctl() based API to a new ndo_hwtstamp_set()
model, but DSA actively prevents that migration, since dsa_master_ioctl()
is currently coded to manually call the master's legacy ndo_eth_ioctl(),
and so, whenever a network device driver would be converted to the new
API, DSA's restrictions would be circumvented, because any device could
be used as a DSA master.
The established way for unrelated modules to react on a net device event
is via netdevice notifiers. So we create a new notifier which gets
called whenever there is an attempt to change hardware timestamping
settings on a device.
Finally, there is another reason why a netdev notifier will be a good
idea, besides strictly DSA, and this has to do with PHY timestamping.
With ndo_eth_ioctl(), all MAC drivers must manually call
phy_has_hwtstamp() before deciding whether to act upon SIOCSHWTSTAMP,
otherwise they must pass this ioctl to the PHY driver via
phy_mii_ioctl().
With the new ndo_hwtstamp_set() API, it will be desirable to simply not
make any calls into the MAC device driver when timestamping should be
performed at the PHY level.
But there exist drivers, such as the lan966x switch, which need to
install packet traps for PTP regardless of whether they are the layer
that provides the hardware timestamps, or the PHY is. That would be
impossible to support with the new API.
The proposal there, too, is to introduce a netdev notifier which acts as
a better cue for switching drivers to add or remove PTP packet traps,
than ndo_hwtstamp_set(). The one introduced here "almost" works there as
well, except for the fact that packet traps should only be installed if
the PHY driver succeeded to enable hardware timestamping, whereas here,
we need to deny hardware timestamping on the DSA master before it
actually gets enabled. This is why this notifier is called "PRE_", and
the notifier that would get used for PHY timestamping and packet traps
would be called NETDEV_CHANGE_HWTSTAMP. This isn't a new concept, for
example NETDEV_CHANGEUPPER and NETDEV_PRECHANGEUPPER do the same thing.
In expectation of future netlink UAPI, we also pass a non-NULL extack
pointer to the netdev notifier, and we make DSA populate it with an
informative reason for the rejection. To avoid making it go to waste, we
make the ioctl-based dev_set_hwtstamp() create a fake extack and print
the message to the kernel log.
Link: https://lore.kernel.org/netdev/20230401191215.tvveoi3lkawgg6g4@skbuf/
Link: https://lore.kernel.org/netdev/20230310164451.ls7bbs6pdzs4m6pw@skbuf/
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jakub Kicinski suggested that we may want to add new UAPI for
controlling hardware timestamping through netlink in the future, and in
that case, we will be limited to the struct hwtstamp_config that is
currently passed in fixed binary format through the SIOCGHWTSTAMP and
SIOCSHWTSTAMP ioctls. It would be good if new kernel code already
started operating on an extensible kernel variant of that structure,
similar in concept to struct kernel_ethtool_coalesce vs struct
ethtool_coalesce.
Since struct hwtstamp_config is in include/uapi/linux/net_tstamp.h, here
we introduce include/linux/net_tstamp.h which shadows that other header,
but also includes it, so that existing includers of this header work as
before. In addition to that, we add the definition for the kernel-only
structure, and a helper which translates all fields by manual copying.
I am doing a manual copy in order to not force the alignment (or type)
of the fields of struct kernel_hwtstamp_config to be the same as of
struct hwtstamp_config, even though now, they are the same.
Link: https://lore.kernel.org/netdev/20230330223519.36ce7d23@kernel.org/
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The kernel will want to start using the more meaningful struct
hwtstamp_config pointer in more places, so move the copy_from_user() at
the beginning of dev_set_hwtstamp() in order to get to that, and pass
this argument to net_hwtstamp_validate().
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
DSA does not want to intercept all ioctls handled by dev_eth_ioctl(),
only SIOCSHWTSTAMP. This can be seen from commit f685e609a3 ("net:
dsa: Deny PTP on master if switch supports it"). However, the way in
which the dsa_ndo_eth_ioctl() is called would suggest otherwise.
Split the handling of SIOCSHWTSTAMP and SIOCGHWTSTAMP ioctls into
separate case statements of dev_ifsioc(), and make each one call its own
sub-function. This also removes the dsa_ndo_eth_ioctl() call from
dev_eth_ioctl(), which from now on exclusively handles PHY ioctls.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In the expression "x == 0 || x != -95", the term "x == 0" does not
change the expression's logical value, because 0 != -95, and so,
if x is 0, the expression would still be true by virtue of the second
term. If x is non-zero, the expression depends on the truth value of
the second term anyway. As such, the first term is redundant and can
be deleted.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The "switch (cmd)" block from dev_ifsioc() gained a bit too much
unnecessary manual handling of "cmd" in the "default" case, starting
with the private ioctls.
Clean that up by using the "ellipsis" gcc extension, adding separate
cases for the rest of the ioctls, and letting the default case only
return -EINVAL.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This fixes the following warning when compiled with GCC 12.2.0 and W=1.
net/core/dev_ioctl.c:475: warning: Function parameter or member 'data'
not described in 'dev_ioctl'
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
One of the worst offenders of "fake flexible arrays" is struct sockaddr,
as it is the classic example of why GCC and Clang have been traditionally
forced to treat all trailing arrays as fake flexible arrays: in the
distant misty past, sa_data became too small, and code started just
treating it as a flexible array, even though it was fixed-size. The
special case by the compiler is specifically that sizeof(sa->sa_data)
and FORTIFY_SOURCE (which uses __builtin_object_size(sa->sa_data, 1))
do not agree (14 and -1 respectively), which makes FORTIFY_SOURCE treat
it as a flexible array.
However, the coming -fstrict-flex-arrays compiler flag will remove
these special cases so that FORTIFY_SOURCE can gain coverage over all
the trailing arrays in the kernel that are _not_ supposed to be treated
as a flexible array. To deal with this change, convert sa_data to a true
flexible array. To keep the structure size the same, move sa_data into
a union with a newly introduced sa_data_min with the original size. The
result is that FORTIFY_SOURCE can continue to have no idea how large
sa_data may actually be, but anything using sizeof(sa->sa_data) must
switch to sizeof(sa->sa_data_min).
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Pavel Begunkov <asml.silence@gmail.com>
Cc: David Ahern <dsahern@kernel.org>
Cc: Dylan Yudaken <dylany@fb.com>
Cc: Yajun Deng <yajun.deng@linux.dev>
Cc: Petr Machata <petrm@nvidia.com>
Cc: Hangbin Liu <liuhangbin@gmail.com>
Cc: Leon Romanovsky <leon@kernel.org>
Cc: syzbot <syzkaller@googlegroups.com>
Cc: Willem de Bruijn <willemb@google.com>
Cc: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20221018095503.never.671-kees@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Netdev reference helpers have a dev_ prefix for historic
reasons. Renaming the old helpers would be too much churn
but we can rename the tracking ones which are relatively
recent and should be the default for new code.
Rename:
dev_hold_track() -> netdev_hold()
dev_put_track() -> netdev_put()
dev_replace_track() -> netdev_ref_replace()
Link: https://lore.kernel.org/r/20220608043955.919359-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
There's a number of functions and static variables used
under net/core/ but not from the outside. We currently
dump most of them into netdevice.h. That bad for many
reasons:
- netdevice.h is very cluttered, hard to figure out
what the APIs are;
- netdevice.h is very long;
- we have to touch netdevice.h more which causes expensive
incremental builds.
Create a header under net/core/ and move some declarations.
The new header is also a bit of a catch-all but that's
fine, if we create more specific headers people will
likely over-think where their declaration fit best.
And end up putting them in netdevice.h, again.
More work should be done on splitting netdevice.h into more
targeted headers, but that'd be more time consuming so small
steps.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Since commit 94dd016ae5 ("bond: pass get_ts_info and SIOC[SG]HWTSTAMP
ioctl to active device") the user could get bond active interface's
PHC index directly. But when there is a failover, the bond active
interface will change, thus the PHC index is also changed. This may
break the user's program if they did not update the PHC timely.
This patch adds a new hwtstamp_config flag HWTSTAMP_FLAG_BONDED_PHC_INDEX.
When the user wants to get the bond active interface's PHC, they need to
add this flag and be aware the PHC index may be changed.
With the new flag. All flag checks in current drivers are removed. Only
the checking in net_hwtstamp_validate() is kept.
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Don't take the lock in net/core/dev_ioctl.c,
we'll have things to do outside rtnl_lock soon.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Before commit ad2f99aedf ("net: bridge: move bridge ioctls out of
.ndo_do_ioctl") the bridge ioctl calls were divided in two parts:
one was deviceless called by sock_ioctl and didn't expect rtnl to be held,
the other was with a device called by dev_ifsioc() and expected rtnl to be
held. After the commit above they were united in a single ioctl stub, but
it didn't take care of the locking expectations.
For sock_ioctl now we acquire (1) br_ioctl_mutex, (2) rtnl
and for dev_ifsioc we acquire (1) rtnl, (2) br_ioctl_mutex
The fix is to get a refcnt on the netdev for dev_ifsioc calls and drop rtnl
then to reacquire it in the bridge ioctl stub after br_ioctl_mutex has
been acquired. That will avoid playing locking games and make the rules
straight-forward: we always take br_ioctl_mutex first, and then rtnl.
Reported-by: syzbot+34fe5894623c4ab1b379@syzkaller.appspotmail.com
Fixes: ad2f99aedf ("net: bridge: move bridge ioctls out of .ndo_do_ioctl")
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
All other user triggered operations are gone from ndo_ioctl, so move
the SIOCBOND family into a custom operation as well.
The .ndo_ioctl() helper is no longer called by the dev_ioctl.c code now,
but there are still a few definitions in obsolete wireless drivers as well
as the appletalk and ieee802154 layers to call SIOCSIFADDR/SIOCGIFADDR
helpers from inside the kernel.
Cc: Jay Vosburgh <j.vosburgh@gmail.com>
Cc: Veaceslav Falico <vfalico@gmail.com>
Cc: Andy Gospodarek <andy@greyhouse.net>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Working towards obsoleting the .ndo_do_ioctl operation entirely,
stop passing the SIOCBRADDIF/SIOCBRDELIF device ioctl commands
into this callback.
My first attempt was to add another ndo_siocbr() callback, but
as there is only a single driver that takes these commands and
there is already a hook mechanism to call directly into this
driver, extend this hook instead, and use it for both the
deviceless and the device specific ioctl commands.
Cc: Roopa Prabhu <roopa@nvidia.com>
Cc: Nikolay Aleksandrov <nikolay@nvidia.com>
Cc: bridge@lists.linux-foundation.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Some drivers that use SIOCDEVPRIVATE ioctl commands modify
the ifreq structure and expect it to be passed back to user
space, which has never really happened for compat mode
because the calling these drivers through ndo_do_ioctl
requires overwriting the ifr_data pointer.
Now that all drivers are converted to ndo_siocdevprivate,
change it to handle this correctly in both compat and
native mode.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
In order to further reduce the scope of ndo_do_ioctl(), move
out the SIOCWANDEV handling into a new network device operation
function.
Adjust the prototype to only pass the if_settings sub-structure
in place of the ifreq, and remove the redundant 'cmd' argument
in the process.
Cc: Krzysztof Halasa <khc@pm.waw.pl>
Cc: "Jan \"Yenya\" Kasprzak" <kas@fi.muni.cz>
Cc: Kevin Curtis <kevin.curtis@farsite.co.uk>
Cc: Zhao Qiang <qiang.zhao@nxp.com>
Cc: Martin Schiller <ms@dev.tdt.de>
Cc: Jiri Slaby <jirislaby@kernel.org>
Cc: linux-x25@vger.kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Most users of ndo_do_ioctl are ethernet drivers that implement
the MII commands SIOCGMIIPHY/SIOCGMIIREG/SIOCSMIIREG, or hardware
timestamping with SIOCSHWTSTAMP/SIOCGHWTSTAMP.
Separate these from the few drivers that use ndo_do_ioctl to
implement SIOCBOND, SIOCBR and SIOCWANDEV commands.
This is a purely cosmetic change intended to help readers find
their way through the implementation.
Cc: Doug Ledford <dledford@redhat.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Jay Vosburgh <j.vosburgh@gmail.com>
Cc: Veaceslav Falico <vfalico@gmail.com>
Cc: Andy Gospodarek <andy@greyhouse.net>
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: Vivien Didelot <vivien.didelot@gmail.com>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: Vladimir Oltean <olteanv@gmail.com>
Cc: Leon Romanovsky <leon@kernel.org>
Cc: linux-rdma@vger.kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The compat handlers for SIOCDEVPRIVATE are incorrect for any driver that
passes data as part of struct ifreq rather than as an ifr_data pointer, or
that passes data back this way, since the compat_ifr_data_ioctl() helper
overwrites the ifr_data pointer and does not copy anything back out.
Since all drivers using devprivate commands are now converted to the
new .ndo_siocdevprivate callback, fix this by adding the missing piece
and passing the pointer separately the whole way.
This further unifies the native and compat logic for socket ioctls,
as the new code now passes the correct pointer as well as the correct
data for both native and compat ioctls.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
SIOCDEVPRIVATE ioctl commands are mainly used in really old
drivers, and they have a number of problems:
- They hide behind the normal .ndo_do_ioctl function that
is also used for other things in modern drivers, so it's
hard to spot a driver that actually uses one of these
- Since drivers use a number different calling conventions,
it is impossible to support compat mode for them in
a generic way.
- With all drivers using the same 16 commands codes, there
is no way to introspect the data being passed through
things like strace.
Add a new net_device_ops callback pointer, to address the
first two of these. Separating them from .ndo_do_ioctl
makes it easy to grep for drivers with a .ndo_siocdevprivate
callback, and the unwieldy name hopefully makes it easier
to spot in code review.
By passing the ifreq structure and the ifr_data pointer
separately, it is no longer necessary to overload these,
and the driver can use either one for a given command.
Cc: Cong Wang <cong.wang@bytedance.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
The dev_ifconf() calling conventions make compat handling
more complicated than necessary, simplify this by moving
the in_compat_syscall() check into the function.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Since dynamic registration of the gifconf() helper is only used for
IPv4, and this can not be in a loadable module, this can be simplified
noticeably by turning it into a direct function call as a preparation
for cleaning up the compat handling.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
SIOCGIFMAP and SIOCSIFMAP currently require compat_alloc_user_space()
and copy_in_user() for compat mode.
Move the compat handling into the location where the structures are
actually used, to avoid using those interfaces and get a clearer
implementation.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
dev_ifsioc_locked() is called with only RCU read lock, so when
there is a parallel writer changing the mac address, it could
get a partially updated mac address, as shown below:
Thread 1 Thread 2
// eth_commit_mac_addr_change()
memcpy(dev->dev_addr, addr->sa_data, ETH_ALEN);
// dev_ifsioc_locked()
memcpy(ifr->ifr_hwaddr.sa_data,
dev->dev_addr,...);
Close this race condition by guarding them with a RW semaphore,
like netdev_get_name(). We can not use seqlock here as it does not
allow blocking. The writers already take RTNL anyway, so this does
not affect the slow path. To avoid bothering existing
dev_set_mac_address() callers in drivers, introduce a new wrapper
just for user-facing callers on ioctl and rtnetlink paths.
Note, bonding also changes slave mac addresses but that requires
a separate patch due to the complexity of bonding code.
Fixes: 3710becf8a ("net: RCU locking for simple ioctl()")
Reported-by: "Gong, Sishuai" <sishuai@purdue.edu>
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Cong Wang <cong.wang@bytedance.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The variable err is being initialized with a value that is never read
and it is being updated later with a new value. The initialization is
redundant and can be removed.
Addresses-Coverity: ("Unused value")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Link: https://lore.kernel.org/r/20201102121615.695196-1-colin.king@canonical.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Make the core net_device code call into our ndo_do_ioctl() and
ndo_get_phys_port_name() functions via the wrappers defined previously
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In preparation for adding another layer of call into a DSA stacked ops
singleton, wrap the ndo_do_ioctl() call into dev_do_ioctl().
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add three string sets related to timestamping information:
ETH_SS_SOF_TIMESTAMPING: SOF_TIMESTAMPING_* flags
ETH_SS_TS_TX_TYPES: timestamping Tx types
ETH_SS_TS_RX_FILTERS: timestamping Rx filters
These will be used for TIMESTAMP_GET request.
v2: avoid compiler warning ("enumeration value not handled in switch")
in net_hwtstamp_validate()
v3: omit dash in Tx type names ("one-step-*" -> "onestep-*"), suggested by
Richard Cochran
Signed-off-by: Michal Kubecek <mkubecek@suse.cz>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The 1588 standard defines one step operation for both Sync and
PDelay_Resp messages. Up until now, hardware with P2P one step has
been rare, and kernel support was lacking. This patch adds support of
the mode in anticipation of new hardware developments.
Signed-off-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch avoids that the following warnings are reported when building
with W=1:
net/core/dev_ioctl.c:378: warning: Function parameter or member 'ifr' not described in 'dev_ioctl'
net/core/dev_ioctl.c:378: warning: Function parameter or member 'need_copyout' not described in 'dev_ioctl'
net/core/dev_ioctl.c:378: warning: Excess function parameter 'arg' description in 'dev_ioctl'
Cc: Al Viro <viro@zeniv.linux.org.uk>
Fixes: 44c02a2c3d ("dev_ioctl(): move copyin/copyout to callers") # v4.16.
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
A follow-up patch will add a notifier type NETDEV_PRE_CHANGEADDR, which
allows vetoing of MAC address changes. One prominent path to that
notification is through dev_set_mac_address(). Therefore give this
function an extack argument, so that it can be packed together with the
notification. Thus a textual reason for rejection (or a warning) can be
communicated back to the user.
Signed-off-by: Petr Machata <petrm@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Reviewed-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In order to pass extack together with NETDEV_PRE_UP notifications, it's
necessary to route the extack to __dev_open() from diverse (possibly
indirect) callers. One prominent API through which the notification is
invoked is dev_change_flags().
Therefore extend dev_change_flags() with and extra extack argument and
update all users. Most of the calls end up just encoding NULL, but
several sites (VLAN, ipvlan, VRF, rtnetlink) do have extack available.
Since the function declaration line is changed anyway, name the other
function arguments to placate checkpatch.
Signed-off-by: Petr Machata <petrm@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Reviewed-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The cited patch added a call to dev_change_tx_queue_len in
SIOCSIFTXQLEN case.
This obsoletes the new len comparison check done before the function call.
Remove it here.
For the desicion of keep/remove the negative value check, we examine the
range check in dev_change_tx_queue_len.
On 64-bit we will fail with -ERANGE. The 32-bit int ifr_qlen will be sign
extended to 64-bits when it is passed into dev_change_tx_queue_len(). And
then for negative values this test triggers:
if (new_len != (unsigned int)new_len)
return -ERANGE;
because:
if (0xffffffffWHATEVER != 0x00000000WHATEVER)
On 32-bit the signed value will be accepted, changing behavior.
Therefore, the negative value check is kept.
Fixes: 3f76df1982 ("net: use dev_change_tx_queue_len() for SIOCSIFTXQLEN")
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Reviewed-by: Eran Ben Elisha <eranbe@mellanox.com>
Cc: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
As noticed by Eric, we need to switch to the helper
dev_change_tx_queue_len() for SIOCSIFTXQLEN call path too,
otheriwse still miss dev_qdisc_change_tx_queue_len().
Fixes: 6a643ddb56 ("net: introduce helper dev_change_tx_queue_len()")
Reported-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Starting with v4.16-rc1 we've been seeing a higher than usual number
of requests for the kernel to load networking modules, even on events
which shouldn't trigger a module load (e.g. ioctl(TCGETS)). Stephen
Smalley suggested the problem may lie in commit 44c02a2c3d
("dev_ioctl(): move copyin/copyout to callers") which moves changes
the network dev_ioctl() function to always call dev_load(),
regardless of the requested ioctl.
This patch moves the dev_load() calls back into the individual ioctls
while preserving the rest of the original patch.
Reported-by: Dominick Grift <dac.override@gmail.com>
Suggested-by: Stephen Smalley <sds@tycho.nsa.gov>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jakub Kicinski