These structures are read in rx path, move them to net_hotdata
for better cache locality.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20240306160031.874438-13-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
These structures are used in GRO and GSO paths.
Move them to net_hodata for better cache locality.
v2: udpv6_offload definition depends on CONFIG_INET=y
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20240306160031.874438-12-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
These are used in TCP fast paths.
Move them into net_hotdata for better cache locality.
v2: tcpv6_offload definition depends on CONFIG_INET
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20240306160031.874438-8-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
These structures are used in GRO and GSO paths.
v2: ipv6_packet_offload definition depends on CONFIG_INET
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20240306160031.874438-7-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
After commit b5a899154a ("netlink: handle EMSGSIZE errors
in the core"), we can remove some code that was not 100 % correct
anyway.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20240306102426.245689-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Found with git grep 'MODULE_AUTHOR(".*([^)]*@'
Fixed with
sed -i '/MODULE_AUTHOR(".*([^)]*@/{s/ (/ </g;s/)"/>"/;s/)and/> and/}' \
$(git grep -l 'MODULE_AUTHOR(".*([^)]*@')
Also:
in drivers/media/usb/siano/smsusb.c normalise ", INC" to ", Inc";
this is what every other MODULE_AUTHOR for this company says,
and it's what the header says
in drivers/sbus/char/openprom.c normalise a double-spaced separator;
this is clearly copied from the copyright header,
where the names are aligned on consecutive lines thusly:
* Linux/SPARC PROM Configuration Driver
* Copyright (C) 1996 Thomas K. Dyas (tdyas@noc.rutgers.edu)
* Copyright (C) 1996 Eddie C. Dost (ecd@skynet.be)
but the authorship branding is single-line
Link: https://lkml.kernel.org/r/mk3geln4azm5binjjlfsgjepow4o73domjv6ajybws3tz22vb3@tarta.nabijaczleweli.xyz
Signed-off-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Cc: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Currently getsockopt does not support IP_ROUTER_ALERT and
IPV6_ROUTER_ALERT, and we are unable to get the values of these two
socket options through getsockopt.
This patch adds getsockopt support for IP_ROUTER_ALERT and
IPV6_ROUTER_ALERT.
Signed-off-by: Juntong Deng <juntong.deng@outlook.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Bridge driver today has no support to forward the userspace timestamp
packets and ends up resetting the timestamp. ETF qdisc checks the
packet coming from userspace and encounters to be 0 thereby dropping
time sensitive packets. These changes will allow userspace timestamps
packets to be forwarded from the bridge to NIC drivers.
Setting the same bit (mono_delivery_time) to avoid dropping of
userspace tstamp packets in the forwarding path.
Existing functionality of mono_delivery_time remains unaltered here,
instead just extended with userspace tstamp support for bridge
forwarding path.
Signed-off-by: Abhishek Chauhan <quic_abchauha@quicinc.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/r/20240301201348.2815102-1-quic_abchauha@quicinc.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
With commit 34d21de99c ("net: Move {l,t,d}stats allocation to core and
convert veth & vrf"), stats allocation could be done on net core
instead of in this driver.
With this new approach, the driver doesn't have to bother with error
handling (allocation failure checking, making sure free happens in the
right spot, etc). This is core responsibility now.
Remove the allocation in the ip6_tunnel driver and leverage the network
core allocation instead.
Signed-off-by: Breno Leitao <leitao@debian.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
This is a cleanup patch, making code a bit more concise.
1) Use skb_network_offset(skb) in place of
(skb_network_header(skb) - skb->data)
2) Use -skb_network_offset(skb) in place of
(skb->data - skb_network_header(skb))
3) Use skb_transport_offset(skb) in place of
(skb_transport_header(skb) - skb->data)
4) Use skb_inner_transport_offset(skb) in place of
(skb_inner_transport_header(skb) - skb->data)
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Edward Cree <ecree.xilinx@gmail.com> # for sfc
Signed-off-by: David S. Miller <davem@davemloft.net>
1) inet6_netconf_dump_devconf() can run under RCU protection
instead of RTNL.
2) properly return 0 at the end of a dump, avoiding an
an extra recvmsg() system call.
3) Do not use inet6_base_seq() anymore, for_each_netdev_dump()
has nice properties. Restarting a GETDEVCONF dump if a device has
been added/removed or if net->ipv6.dev_addr_genid has changed is moot.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Writing over /proc/sys/net/ipv6/conf/default/disable_policy
does not need to hold RTNL.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
idev->cnf.disable_policy and net->ipv6.devconf_all->disable_policy
can be read locklessly. Add appropriate annotations on reads
and writes.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
devconf->proxy_ndp can be read and written locklessly,
add appropriate annotations.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Use READ_ONCE() while reading idev->cnf.rtr_probe_interval
while its value could be changed.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
idev->cnf.ignore_routes_with_linkdown can be used without any locks,
add appropriate annotations.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Annotate reads from in6_dev->cnf.XXX fields, as they could
change concurrently.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
idev->cnf.forwarding and net->ipv6.devconf_all->forwarding
might be read locklessly, add appropriate READ_ONCE()
and WRITE_ONCE() annotations.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
idev->cnf.hop_limit and net->ipv6.devconf_all->hop_limit
might be read locklessly, add appropriate READ_ONCE()
and WRITE_ONCE() annotations.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Florian Westphal <fw@strlen.de> # for netfilter parts
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
idev->cnf.mtu6 might be read locklessly, add appropriate READ_ONCE()
and WRITE_ONCE() annotations.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Writing over /proc/sys/net/ipv6/conf/default/disable_ipv6
does not need to hold RTNL.
v3: remove a wrong change (Jakub Kicinski feedback)
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
disable_ipv6 is read locklessly, add appropriate READ_ONCE()
and WRITE_ONCE() annotations.
v2: do not preload net before rtnl_trylock() in
addrconf_disable_ipv6() (Jiri)
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
If the driver is using the network core allocation mechanism, by setting
NETDEV_PCPU_STAT_TSTATS, as this driver is, then, it doesn't need to set
the dev_get_tstats64() generic .ndo_get_stats64 function pointer. Since
the network core calls it automatically, and .ndo_get_stats64 should
only be set if the driver needs special treatment.
This simplifies the driver, since all the generic statistics is now
handled by core.
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
I missed that inet6_dump_addr() is calling in6_dump_addrs()
from two points.
First one under RTNL protection, and second one under rcu_read_lock().
Since we want to remove RTNL use from inet6_dump_addr() very soon,
no longer assume in6_dump_addrs() is protected by RTNL (even
if this is still the case).
Use rcu_read_lock() earlier to fix this lockdep splat:
WARNING: suspicious RCU usage
6.8.0-rc5-syzkaller-01618-gf8cbf6bde4c8 #0 Not tainted
net/ipv6/addrconf.c:5317 suspicious rcu_dereference_check() usage!
other info that might help us debug this:
rcu_scheduler_active = 2, debug_locks = 1
3 locks held by syz-executor.2/8834:
#0: ffff88802f554678 (nlk_cb_mutex-ROUTE){+.+.}-{3:3}, at: __netlink_dump_start+0x119/0x780 net/netlink/af_netlink.c:2338
#1: ffffffff8f377a88 (rtnl_mutex){+.+.}-{3:3}, at: netlink_dump+0x676/0xda0 net/netlink/af_netlink.c:2265
#2: ffff88807e5f0580 (&ndev->lock){++--}-{2:2}, at: in6_dump_addrs+0xb8/0x1de0 net/ipv6/addrconf.c:5279
stack backtrace:
CPU: 1 PID: 8834 Comm: syz-executor.2 Not tainted 6.8.0-rc5-syzkaller-01618-gf8cbf6bde4c8 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/25/2024
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:88 [inline]
dump_stack_lvl+0x1e7/0x2e0 lib/dump_stack.c:106
lockdep_rcu_suspicious+0x220/0x340 kernel/locking/lockdep.c:6712
in6_dump_addrs+0x1b47/0x1de0 net/ipv6/addrconf.c:5317
inet6_dump_addr+0x1597/0x1690 net/ipv6/addrconf.c:5428
netlink_dump+0x6a6/0xda0 net/netlink/af_netlink.c:2266
__netlink_dump_start+0x59d/0x780 net/netlink/af_netlink.c:2374
netlink_dump_start include/linux/netlink.h:340 [inline]
rtnetlink_rcv_msg+0xcf7/0x10d0 net/core/rtnetlink.c:6555
netlink_rcv_skb+0x1e3/0x430 net/netlink/af_netlink.c:2547
netlink_unicast_kernel net/netlink/af_netlink.c:1335 [inline]
netlink_unicast+0x7ea/0x980 net/netlink/af_netlink.c:1361
netlink_sendmsg+0x8e0/0xcb0 net/netlink/af_netlink.c:1902
sock_sendmsg_nosec net/socket.c:730 [inline]
__sock_sendmsg+0x221/0x270 net/socket.c:745
____sys_sendmsg+0x525/0x7d0 net/socket.c:2584
___sys_sendmsg net/socket.c:2638 [inline]
__sys_sendmsg+0x2b0/0x3a0 net/socket.c:2667
Fixes: c3718936ec ("ipv6: anycast: complete RCU handling of struct ifacaddr6")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/20240227222259.4081489-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Since commit 446fda4f26 ("[NetLabel]: CIPSOv4 engine"), *bitmap_walk
function only returns -1. Nearly 18 years have passed, -2 scenes never
come up, so there's no need to consider it.
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Acked-by: Paul Moore <paul@paul-moore.com>
Link: https://lore.kernel.org/r/20240227093604.3574241-1-shaozhengchao@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The input parameter 'level' in rawv6_get/seticmpfilter is not used.
Therefore, remove it.
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
If we're processing an IOAM Pre-allocated Trace Option-Type (the only
one supported currently), then send the trace as an ioam6 event to the
netlink multicast group. This way, user space apps will be able to
collect IOAM data.
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Justin Iurman <justin.iurman@uliege.be>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add a multicast group to the ioam6 generic netlink family and provide
ioam6_event() to send an ioam6 event to the multicast group.
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Justin Iurman <justin.iurman@uliege.be>
Signed-off-by: David S. Miller <davem@davemloft.net>
It's time to let it work right now. We've already prepared for this:)
Signed-off-by: Jason Xing <kernelxing@tencent.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Update three callers including both ipv4 and ipv6 and let the dropreason
mechanism work in reality.
Signed-off-by: Jason Xing <kernelxing@tencent.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Like what I did to ipv4 mode, refine this part: adding more drop
reasons for better tracing.
Signed-off-by: Jason Xing <kernelxing@tencent.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Like previous patch does, only moving skb drop logical code to
cookie_v6_check() for later refinement.
Signed-off-by: Jason Xing <kernelxing@tencent.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The input parameter 'opt' in rawv6_err() is not used. Therefore, remove it.
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/20240224084121.2479603-1-shaozhengchao@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
struct ifacaddr6 are already freed after RCU grace period.
Add __rcu qualifier to aca_next pointer, and idev->ac_list
Add relevant rcu_assign_pointer() and dereference accessors.
ipv6_chk_acast_dev() no longer needs to acquire idev->lock.
/proc/net/anycast6 is now purely RCU protected, it no
longer acquires idev->lock.
Similarly in6_dump_addrs() can use RCU protection to iterate
through anycast addresses. It was relying on a mixture of RCU
and RTNL but next patches will get rid of RTNL there.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/20240223201054.220534-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
It seems that if userspace provides a correct IFA_TARGET_NETNSID value
but no IFA_ADDRESS and IFA_LOCAL attributes, inet6_rtm_getaddr()
returns -EINVAL with an elevated "struct net" refcount.
Fixes: 6ecf4c37eb ("ipv6: enable IFA_TARGET_NETNSID for RTM_GETADDR")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: David Ahern <dsahern@kernel.org>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add a new field into struct fib_dump_filter, to let callers
tell if they use RTNL locking or RCU.
This is used in the following patch, when inet_dump_fib()
no longer holds RTNL.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
No longer hold RTNL while calling inet6_dump_ifinfo()
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Prepare inet6_dump_ifinfo() to run with RCU protection
instead of RTNL and use for_each_netdev_dump() interface.
Also properly return 0 at the end of a dump, avoiding
an extra recvmsg() system call and RTNL acquisition.
Note that RTNL-less dumps need core changes, coming later
in the series.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
We want to use RCU protection instead of RTNL
for inet6_fill_ifinfo().
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
We want to no longer hold RTNL while calling inet6_fill_ifla6_attrs()
in the future. Add needed READ_ONCE()/WRITE_ONCE() annotations.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
We want to be able to run rtnl_fill_ifinfo() under RCU protection
instead of RTNL in the future.
This patch prepares dev_get_iflink() and nla_put_iflink()
to run either with RTNL or RCU held.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
With commit 34d21de99c ("net: Move {l,t,d}stats allocation to core and
convert veth & vrf"), stats allocation could be done on net core
instead of this driver.
With this new approach, the driver doesn't have to bother with error
handling (allocation failure checking, making sure free happens in the
right spot, etc). This is core responsibility now.
Remove the allocation in the ipv6/sit driver and leverage the network
core allocation.
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20240221161732.3026127-1-leitao@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
ioam6_fill_trace_data() writes inside the skb payload without ensuring
it's writeable (e.g., not cloned). This function is called both from the
input and output path. The output path (ioam6_iptunnel) already does the
check. This commit provides a fix for the input path, inside
ipv6_hop_ioam(). It also updates ip6_parse_tlv() to refresh the network
header pointer ("nh") when returning from ipv6_hop_ioam().
Fixes: 9ee11f0fff ("ipv6: ioam: Data plane support for Pre-allocated Trace")
Reported-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Justin Iurman <justin.iurman@uliege.be>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
We want to re-organize the struct sock layout. The sk_peek_off
field location is problematic, as most protocols want it in the
RX read area, while UDP wants it on a cacheline different from
sk_receive_queue.
Create a local (inside udp_sock) copy of the 'peek offset is enabled'
flag and place it inside the same cacheline of reader_queue.
Check such flag before reading sk_peek_off. This will save potential
false sharing and cache misses in the fast-path.
Tested under UDP flood with small packets. The struct sock layout
update causes a 4% performance drop, and this patch restores completely
the original tput.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/r/67ab679c15fbf49fa05b3ffe05d91c47ab84f147.1708426665.git.pabeni@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Use the new KMEM_CACHE() macro instead of direct kmem_cache_create
to simplify the creation of SLAB caches.
Signed-off-by: Kunwu Chan <chentao@kylinos.cn>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Use the new KMEM_CACHE() macro instead of direct kmem_cache_create
to simplify the creation of SLAB caches.
And change cache name from 'ip6_mrt_cache' to 'mfc6_cache'.
Signed-off-by: Kunwu Chan <chentao@kylinos.cn>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The pernet operations structure for the subsystem must be registered
before registering the generic netlink family.
Fixes: 915d7e5e59 ("ipv6: sr: add code base for control plane support of SR-IPv6")
Signed-off-by: Vasiliy Kovalev <kovalev@altlinux.org>
Link: https://lore.kernel.org/r/20240215202717.29815-1-kovalev@altlinux.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
net->dev_base_seq and ipv6.dev_addr_genid are monotonically increasing.
If we XOR their values, we could miss to detect if both values
were changed with the same amount.
Fixes: 63998ac24f ("ipv6: provide addr and netconf dump consistency info")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
If the preferred lifetime was less than the minimum required lifetime,
ipv6_create_tempaddr would error out without creating any new address.
On my machine and network, this error happened immediately with the
preferred lifetime set to 5 seconds or less, after a few minutes with
the preferred lifetime set to 6 seconds, and not at all with the
preferred lifetime set to 7 seconds. During my investigation, I found a
Stack Exchange post from another person who seems to have had the same
problem: They stopped getting new addresses if they lowered the
preferred lifetime below 3 seconds, and they didn't really know why.
The preferred lifetime is a preference, not a hard requirement. The
kernel does not strictly forbid new connections on a deprecated address,
nor does it guarantee that the address will be disposed of the instant
its total valid lifetime expires. So rather than disable IPv6 privacy
extensions altogether if the minimum required lifetime swells above the
preferred lifetime, it is more in keeping with the user's intent to
increase the temporary address's lifetime to the minimum necessary for
the current network conditions.
With these fixes, setting the preferred lifetime to 5 or 6 seconds "just
works" because the extra fraction of a second is practically
unnoticeable. It's even possible to reduce the time before deprecation
to 1 or 2 seconds by setting /proc/sys/net/ipv6/conf/*/regen_min_advance
and /proc/sys/net/ipv6/conf/*/dad_transmits to 0. I realize that that is
a pretty niche use case, but I know at least one person who would gladly
sacrifice performance and convenience to be sure that they are getting
the maximum possible level of privacy.
Link: https://serverfault.com/a/1031168/310447
Signed-off-by: Alex Henrie <alexhenrie24@gmail.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
In RFC 8981, REGEN_ADVANCE cannot be less than 2 seconds, and the RFC
does not permit the creation of temporary addresses with lifetimes
shorter than that:
> When processing a Router Advertisement with a
> Prefix Information option carrying a prefix for the purposes of
> address autoconfiguration (i.e., the A bit is set), the host MUST
> perform the following steps:
> 5. A temporary address is created only if this calculated preferred
> lifetime is greater than REGEN_ADVANCE time units.
However, some users want to change their IPv6 address as frequently as
possible regardless of the RFC's arbitrary minimum lifetime. For the
benefit of those users, add a regen_min_advance sysctl parameter that
can be set to below or above 2 seconds.
Link: https://datatracker.ietf.org/doc/html/rfc8981
Signed-off-by: Alex Henrie <alexhenrie24@gmail.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
RFC 8981 defines REGEN_ADVANCE as follows:
REGEN_ADVANCE = 2 + (TEMP_IDGEN_RETRIES * DupAddrDetectTransmits * RetransTimer / 1000)
Thus, allowing it to be less than 2 seconds is technically a protocol
violation.
Link: https://datatracker.ietf.org/doc/html/rfc8981#name-defined-protocol-parameters
Signed-off-by: Alex Henrie <alexhenrie24@gmail.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
When SOF_TIMESTAMPING_OPT_ID is used to ambiguate timestamped datagrams,
the sk_tskey can become unpredictable in case of any error happened
during sendmsg(). Move increment later in the code and make decrement of
sk_tskey in error path. This solution is still racy in case of multiple
threads doing snedmsg() over the very same socket in parallel, but still
makes error path much more predictable.
Fixes: 09c2d251b7 ("net-timestamp: add key to disambiguate concurrent datagrams")
Reported-by: Andy Lutomirski <luto@amacapital.net>
Signed-off-by: Vadim Fedorenko <vadfed@meta.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/r/20240213110428.1681540-1-vadfed@meta.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
operstate_show() can omit dev_base_lock acquisition only
to read dev->operstate.
Annotate accesses to dev->operstate.
Writers still acquire dev_base_lock for mutual exclusion.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
As discussed in the past (commit 2d3916f318 ("ipv6: fix skb drops
in igmp6_event_query() and igmp6_event_report()")) I think the
synchronize_net() call in ipv6_mc_down() is not needed.
Under load, synchronize_net() can last between 200 usec and 5 ms.
KASAN seems to agree as well.
Fixes: f185de28d9 ("mld: add new workqueues for process mld events")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Taehee Yoo <ap420073@gmail.com>
Cc: Cong Wang <xiyou.wangcong@gmail.com>
Cc: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Make the decision to set or clean the expires of a route based on the
RTF_EXPIRES flag, rather than the value of the "expires" argument.
This patch doesn't make difference logically, but make inet6_addr_modify()
and modify_prefix_route() consistent.
The function inet6_addr_modify() is the only caller of
modify_prefix_route(), and it passes the RTF_EXPIRES flag and an expiration
value. The RTF_EXPIRES flag is turned on or off based on the value of
valid_lft. The RTF_EXPIRES flag is turned on if valid_lft is a finite value
(not infinite, not 0xffffffff). Even if valid_lft is 0, the RTF_EXPIRES
flag remains on. The expiration value being passed is equal to the
valid_lft value if the flag is on. However, if the valid_lft value is
infinite, the expiration value becomes 0 and the RTF_EXPIRES flag is turned
off. Despite this, modify_prefix_route() decides to set the expiration
value if the received expiration value is not zero. This mixing of infinite
and zero cases creates an inconsistency.
Reviewed-by: Hangbin Liu <liuhangbin@gmail.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Kui-Feng Lee <thinker.li@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
FIB6 GC walks trees of fib6_tables to remove expired routes. Walking a tree
can be expensive if the number of routes in a table is big, even if most of
them are permanent. Checking routes in a separated list of routes having
expiration will avoid this potential issue.
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Kui-Feng Lee <thinker.li@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The route here is newly created. It is unnecessary to call
fib6_clean_expires() on it.
Suggested-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Hangbin Liu <liuhangbin@gmail.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Kui-Feng Lee <thinker.li@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pass the duration of a lifetime (in seconds) to the function
rt6_add_dflt_router() so that it can properly set the expiration time.
The function ndisc_router_discovery() is the only one that calls
rt6_add_dflt_router(), and it will later set the expiration time for the
route created by rt6_add_dflt_router(). However, there is a gap of time
between calling rt6_add_dflt_router() and setting the expiration time in
ndisc_router_discovery(). During this period, there is a possibility that a
new route may be removed from the routing table. By setting the correct
expiration time in rt6_add_dflt_router(), we can prevent this from
happening. The reason for setting RTF_EXPIRES in rt6_add_dflt_router() is
to start the Garbage Collection (GC) timer, as it only activates when a
route with RTF_EXPIRES is added to a table.
Suggested-by: David Ahern <dsahern@kernel.org>
Reviewed-by: Hangbin Liu <liuhangbin@gmail.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Kui-Feng Lee <thinker.li@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
W=1 builds now warn if module is built without a MODULE_DESCRIPTION().
Add descriptions to the IPv6 modules.
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240208164244.3818498-6-leitao@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
exit_batch_rtnl() is called while RTNL is held,
and devices to be unregistered can be queued in the dev_kill_list.
This saves one rtnl_lock()/rtnl_unlock() pair
and one unregister_netdevice_many() call.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Antoine Tenart <atenart@kernel.org>
Link: https://lore.kernel.org/r/20240206144313.2050392-14-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
exit_batch_rtnl() is called while RTNL is held,
and devices to be unregistered can be queued in the dev_kill_list.
This saves one rtnl_lock()/rtnl_unlock() pair
and one unregister_netdevice_many() call.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Antoine Tenart <atenart@kernel.org>
Link: https://lore.kernel.org/r/20240206144313.2050392-13-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
exit_batch_rtnl() is called while RTNL is held,
and devices to be unregistered can be queued in the dev_kill_list.
This saves one rtnl_lock()/rtnl_unlock() pair
and one unregister_netdevice_many() call.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Antoine Tenart <atenart@kernel.org>
Link: https://lore.kernel.org/r/20240206144313.2050392-12-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
exit_batch_rtnl() is called while RTNL is held,
and devices to be unregistered can be queued in the dev_kill_list.
This saves one rtnl_lock()/rtnl_unlock() pair
and one unregister_netdevice_many() call.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Antoine Tenart <atenart@kernel.org>
Link: https://lore.kernel.org/r/20240206144313.2050392-11-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Both addrconf_verify_work() and addrconf_dad_work() acquire rtnl,
there is no point trying to have one thread per cpu.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20240201173031.3654257-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
On a parisc64 kernel I sometimes notice this kernel warning:
Kernel unaligned access to 0x40ff8814 at ndisc_send_skb+0xc0/0x4d8
The address 0x40ff8814 points to the in6addr_linklocal_allrouters
variable and the warning simply means that some ipv6 function tries to
read a 64-bit word directly from the not-64-bit aligned
in6addr_linklocal_allrouters variable.
Unaligned accesses are non-critical as the architecture or exception
handlers usually will fix it up at runtime. Nevertheless it may trigger
a performance penality for some architectures. For details read the
"unaligned-memory-access" kernel documentation.
The patch below ensures that the ipv6 loopback and router addresses will
always be naturally aligned. This prevents the unaligned accesses for
all architectures.
Signed-off-by: Helge Deller <deller@gmx.de>
Fixes: 034dfc5df9 ("ipv6: export in6addr_loopback to modules")
Acked-by: Paolo Abeni <pabeni@redhat.com>
Link: https://lore.kernel.org/r/ZbNuFM1bFqoH-UoY@p100
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Add hidden IP(6)_NF_IPTABLES_LEGACY symbol.
When any of the "old" builtin tables are enabled the "old" iptables
interface will be supported.
To disable the old set/getsockopt interface the existing options
for the builtin tables need to be turned off:
CONFIG_IP_NF_IPTABLES=m
CONFIG_IP_NF_FILTER is not set
CONFIG_IP_NF_NAT is not set
CONFIG_IP_NF_MANGLE is not set
CONFIG_IP_NF_RAW is not set
CONFIG_IP_NF_SECURITY is not set
Same for CONFIG_IP6_NF_ variants.
This allows to build a kernel that only supports ip(6)tables-nft
(iptables-over-nftables api).
In the future the _LEGACY symbol will become visible and the select
statements will be turned into 'depends on', but for now be on safe side
so "make oldconfig" won't break things.
Signed-off-by: Florian Westphal <fw@strlen.de>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTFp0I1jqZrAX+hPRXbK58LschIgwUCZbQV+gAKCRDbK58LschI
g2OeAP0VvhZS9SPiS+/AMAFuw2W1BkMrFNbfBTc3nzRnyJSmNAD+NG4CLLJvsKI9
olu7VC20B8pLTGLUGIUSwqnjOC+Kkgc=
=wVMl
-----END PGP SIGNATURE-----
Merge tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Daniel Borkmann says:
====================
pull-request: bpf-next 2024-01-26
We've added 107 non-merge commits during the last 4 day(s) which contain
a total of 101 files changed, 6009 insertions(+), 1260 deletions(-).
The main changes are:
1) Add BPF token support to delegate a subset of BPF subsystem
functionality from privileged system-wide daemons such as systemd
through special mount options for userns-bound BPF fs to a trusted
& unprivileged application. With addressed changes from Christian
and Linus' reviews, from Andrii Nakryiko.
2) Support registration of struct_ops types from modules which helps
projects like fuse-bpf that seeks to implement a new struct_ops type,
from Kui-Feng Lee.
3) Add support for retrieval of cookies for perf/kprobe multi links,
from Jiri Olsa.
4) Bigger batch of prep-work for the BPF verifier to eventually support
preserving boundaries and tracking scalars on narrowing fills,
from Maxim Mikityanskiy.
5) Extend the tc BPF flavor to support arbitrary TCP SYN cookies to help
with the scenario of SYN floods, from Kuniyuki Iwashima.
6) Add code generation to inline the bpf_kptr_xchg() helper which
improves performance when stashing/popping the allocated BPF objects,
from Hou Tao.
7) Extend BPF verifier to track aligned ST stores as imprecise spilled
registers, from Yonghong Song.
8) Several fixes to BPF selftests around inline asm constraints and
unsupported VLA code generation, from Jose E. Marchesi.
9) Various updates to the BPF IETF instruction set draft document such
as the introduction of conformance groups for instructions,
from Dave Thaler.
10) Fix BPF verifier to make infinite loop detection in is_state_visited()
exact to catch some too lax spill/fill corner cases,
from Eduard Zingerman.
11) Refactor the BPF verifier pointer ALU check to allow ALU explicitly
instead of implicitly for various register types, from Hao Sun.
12) Fix the flaky tc_redirect_dtime BPF selftest due to slowness
in neighbor advertisement at setup time, from Martin KaFai Lau.
13) Change BPF selftests to skip callback tests for the case when the
JIT is disabled, from Tiezhu Yang.
14) Add a small extension to libbpf which allows to auto create
a map-in-map's inner map, from Andrey Grafin.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (107 commits)
selftests/bpf: Add missing line break in test_verifier
bpf, docs: Clarify definitions of various instructions
bpf: Fix error checks against bpf_get_btf_vmlinux().
bpf: One more maintainer for libbpf and BPF selftests
selftests/bpf: Incorporate LSM policy to token-based tests
selftests/bpf: Add tests for LIBBPF_BPF_TOKEN_PATH envvar
libbpf: Support BPF token path setting through LIBBPF_BPF_TOKEN_PATH envvar
selftests/bpf: Add tests for BPF object load with implicit token
selftests/bpf: Add BPF object loading tests with explicit token passing
libbpf: Wire up BPF token support at BPF object level
libbpf: Wire up token_fd into feature probing logic
libbpf: Move feature detection code into its own file
libbpf: Further decouple feature checking logic from bpf_object
libbpf: Split feature detectors definitions from cached results
selftests/bpf: Utilize string values for delegate_xxx mount options
bpf: Support symbolic BPF FS delegation mount options
bpf: Fail BPF_TOKEN_CREATE if no delegation option was set on BPF FS
bpf,selinux: Allocate bpf_security_struct per BPF token
selftests/bpf: Add BPF token-enabled tests
libbpf: Add BPF token support to bpf_prog_load() API
...
====================
Link: https://lore.kernel.org/r/20240126215710.19855-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Use the new KMEM_CACHE() macro instead of direct kmem_cache_create
to simplify the creation of SLAB caches.
Signed-off-by: Kunwu Chan <chentao@kylinos.cn>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
In some configurations, the 'iter' variable in function
fib6_repair_tree() is unused, resulting the following warning when
compiled with W=1.
net/ipv6/ip6_fib.c:1781:6: warning: variable 'iter' set but not used [-Wunused-but-set-variable]
1781 | int iter = 0;
| ^
It is unclear what is the advantage of this RT6_TRACE() macro[1], since
users can control pr_debug() in runtime, which is better than at
compilation time. pr_debug() has no overhead when disabled.
Remove the RT6_TRACE() in favor of simple pr_debug() helpers.
[1] Link: https://lore.kernel.org/all/ZZwSEJv2HgI0cD4J@gmail.com/
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20240122181955.2391676-2-leitao@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In the ipv6 system, we have some logs basically dumping the name of the
function that is being called. This is not ideal, since ftrace give us
"for free". Moreover, checkpatch is not happy when touching that code:
WARNING: Unnecessary ftrace-like logging - prefer using ftrace
Remove debug functions that only print the current function name.
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20240122181955.2391676-1-leitao@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
We will support arbitrary SYN Cookie with BPF in the following
patch.
If BPF prog validates ACK and kfunc allocates a reqsk, it will
be carried to cookie_[46]_check() as skb->sk. If skb->sk is not
NULL, we call cookie_bpf_check().
Then, we clear skb->sk and skb->destructor, which are needed not
to hold refcnt for reqsk and the listener. See the following patch
for details.
After that, we finish initialisation for the remaining fields with
cookie_tcp_reqsk_init().
Note that the server side WScale is set only for non-BPF SYN Cookie.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://lore.kernel.org/r/20240115205514.68364-5-kuniyu@amazon.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
-----BEGIN PGP SIGNATURE-----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=DHHp
-----END PGP SIGNATURE-----
Merge tag 'nf-24-01-18' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
The following batch contains Netfilter fixes for net. Slightly larger
than usual because this batch includes several patches to tighten the
nf_tables control plane to reject inconsistent configuration:
1) Restrict NFTA_SET_POLICY to NFT_SET_POL_PERFORMANCE and
NFT_SET_POL_MEMORY.
2) Bail out if a nf_tables expression registers more than 16 netlink
attributes which is what struct nft_expr_info allows.
3) Bail out if NFT_EXPR_STATEFUL provides no .clone interface, remove
existing fallback to memcpy() when cloning which might accidentally
duplicate memory reference to the same object.
4) Fix br_netfilter interaction with neighbour layer. This requires
three preparation patches:
- Use nf_bridge_get_physinif() in nfnetlink_log
- Use nf_bridge_info_exists() to check in br_netfilter context
is available in nf_queue.
- Pass net to nf_bridge_get_physindev()
And finally, the fix which replaces physindev with physinif
in nf_bridge_info.
Patches from Pavel Tikhomirov.
5) Catch-all deactivation happens in the transaction, hence this
oneliner to check for the next generation. This bug uncovered after
the removal of the _BUSY bit, which happened in set elements back in
summer 2023.
6) Ensure set (total) key length size and concat field length description
is consistent, otherwise bail out.
7) Skip set element with the _DEAD flag on from the netlink dump path.
A tests occasionally shows that dump is mismatching because GC might
lose race to get rid of this element while a netlink dump is in
progress.
8) Reject NFT_SET_CONCAT for field_count < 1.
9) Use IP6_INC_STATS in ipvs to fix preemption BUG splat, patch
from Fedor Pchelkin.
* tag 'nf-24-01-18' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
ipvs: avoid stat macros calls from preemptible context
netfilter: nf_tables: reject NFT_SET_CONCAT with not field length description
netfilter: nf_tables: skip dead set elements in netlink dump
netfilter: nf_tables: do not allow mismatch field size and set key length
netfilter: nf_tables: check if catch-all set element is active in next generation
netfilter: bridge: replace physindev with physinif in nf_bridge_info
netfilter: propagate net to nf_bridge_get_physindev
netfilter: nf_queue: remove excess nf_bridge variable
netfilter: nfnetlink_log: use proper helper for fetching physinif
netfilter: nft_limit: do not ignore unsupported flags
netfilter: nf_tables: bail out if stateful expression provides no .clone
netfilter: nf_tables: validate .maxattr at expression registration
netfilter: nf_tables: reject invalid set policy
====================
Link: https://lore.kernel.org/r/20240118161726.14838-1-pablo@netfilter.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
idev->mc_ifc_count can be written over without proper locking.
Originally found by syzbot [1], fix this issue by encapsulating calls
to mld_ifc_stop_work() (and mld_gq_stop_work() for good measure) with
mutex_lock() and mutex_unlock() accordingly as these functions
should only be called with mc_lock per their declarations.
[1]
BUG: KCSAN: data-race in ipv6_mc_down / mld_ifc_work
write to 0xffff88813a80c832 of 1 bytes by task 3771 on cpu 0:
mld_ifc_stop_work net/ipv6/mcast.c:1080 [inline]
ipv6_mc_down+0x10a/0x280 net/ipv6/mcast.c:2725
addrconf_ifdown+0xe32/0xf10 net/ipv6/addrconf.c:3949
addrconf_notify+0x310/0x980
notifier_call_chain kernel/notifier.c:93 [inline]
raw_notifier_call_chain+0x6b/0x1c0 kernel/notifier.c:461
__dev_notify_flags+0x205/0x3d0
dev_change_flags+0xab/0xd0 net/core/dev.c:8685
do_setlink+0x9f6/0x2430 net/core/rtnetlink.c:2916
rtnl_group_changelink net/core/rtnetlink.c:3458 [inline]
__rtnl_newlink net/core/rtnetlink.c:3717 [inline]
rtnl_newlink+0xbb3/0x1670 net/core/rtnetlink.c:3754
rtnetlink_rcv_msg+0x807/0x8c0 net/core/rtnetlink.c:6558
netlink_rcv_skb+0x126/0x220 net/netlink/af_netlink.c:2545
rtnetlink_rcv+0x1c/0x20 net/core/rtnetlink.c:6576
netlink_unicast_kernel net/netlink/af_netlink.c:1342 [inline]
netlink_unicast+0x589/0x650 net/netlink/af_netlink.c:1368
netlink_sendmsg+0x66e/0x770 net/netlink/af_netlink.c:1910
...
write to 0xffff88813a80c832 of 1 bytes by task 22 on cpu 1:
mld_ifc_work+0x54c/0x7b0 net/ipv6/mcast.c:2653
process_one_work kernel/workqueue.c:2627 [inline]
process_scheduled_works+0x5b8/0xa30 kernel/workqueue.c:2700
worker_thread+0x525/0x730 kernel/workqueue.c:2781
...
Fixes: 2d9a93b490 ("mld: convert from timer to delayed work")
Reported-by: syzbot+a9400cabb1d784e49abf@syzkaller.appspotmail.com
Link: https://lore.kernel.org/all/000000000000994e09060ebcdffb@google.com/
Signed-off-by: Nikita Zhandarovich <n.zhandarovich@fintech.ru>
Acked-by: Taehee Yoo <ap420073@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Hangbin Liu <liuhangbin@gmail.com>
Link: https://lore.kernel.org/r/20240117172102.12001-1-n.zhandarovich@fintech.ru
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
An skb can be added to a neigh->arp_queue while waiting for an arp
reply. Where original skb's skb->dev can be different to neigh's
neigh->dev. For instance in case of bridging dnated skb from one veth to
another, the skb would be added to a neigh->arp_queue of the bridge.
As skb->dev can be reset back to nf_bridge->physindev and used, and as
there is no explicit mechanism that prevents this physindev from been
freed under us (for instance neigh_flush_dev doesn't cleanup skbs from
different device's neigh queue) we can crash on e.g. this stack:
arp_process
neigh_update
skb = __skb_dequeue(&neigh->arp_queue)
neigh_resolve_output(..., skb)
...
br_nf_dev_xmit
br_nf_pre_routing_finish_bridge_slow
skb->dev = nf_bridge->physindev
br_handle_frame_finish
Let's use plain ifindex instead of net_device link. To peek into the
original net_device we will use dev_get_by_index_rcu(). Thus either we
get device and are safe to use it or we don't get it and drop skb.
Fixes: c4e70a87d9 ("netfilter: bridge: rename br_netfilter.c to br_netfilter_hooks.c")
Suggested-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pavel Tikhomirov <ptikhomirov@virtuozzo.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
This is a preparation patch for replacing physindev with physinif on
nf_bridge_info structure. We will use dev_get_by_index_rcu to resolve
device, when needed, and it requires net to be available.
Signed-off-by: Pavel Tikhomirov <ptikhomirov@virtuozzo.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
This reverts commit 0a8de364ff.
Shachar reported that Vagrant (https://www.vagrantup.com/), which is
very popular tool to manage fleet of VMs stopped to work after commit
citied in Fixes line.
The issue appears while using Vagrant to manage nested VMs.
The steps are:
* create vagrant file
* vagrant up
* vagrant halt (VM is created but shut down)
* vagrant up - fail
Vagrant up stdout:
Bringing machine 'player1' up with 'libvirt' provider...
==> player1: Creating shared folders metadata...
==> player1: Starting domain.
==> player1: Domain launching with graphics connection settings...
==> player1: -- Graphics Port: 5900
==> player1: -- Graphics IP: 127.0.0.1
==> player1: -- Graphics Password: Not defined
==> player1: -- Graphics Websocket: 5700
==> player1: Waiting for domain to get an IP address...
==> player1: Waiting for machine to boot. This may take a few minutes...
player1: SSH address: 192.168.123.61:22
player1: SSH username: vagrant
player1: SSH auth method: private key
==> player1: Attempting graceful shutdown of VM...
==> player1: Attempting graceful shutdown of VM...
==> player1: Attempting graceful shutdown of VM...
player1: Guest communication could not be established! This is usually because
player1: SSH is not running, the authentication information was changed,
player1: or some other networking issue. Vagrant will force halt, if
player1: capable.
==> player1: Attempting direct shutdown of domain...
Fixes: 0a8de364ff ("tcp: no longer abort SYN_SENT when receiving some ICMP")
Closes: https://lore.kernel.org/all/MN2PR12MB44863139E562A59329E89DBEB982A@MN2PR12MB4486.namprd12.prod.outlook.com
Signed-off-by: Shachar Kagan <skagan@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/14459261ea9f9c7d7dfb28eb004ce8734fa83ade.1704185904.git.leonro@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The existing code always pulls the IPv6 header and sets the transport
offset initially. Then optionally again pulls any extension headers in
ipv6_gso_pull_exthdrs and sets the transport offset again on return from
that call. skb->data is set at the start of the first extension header
before calling ipv6_gso_pull_exthdrs, and must disable the frag0
optimization because that function uses pskb_may_pull/pskb_pull instead of
skb_gro_ helpers. It sets the GRO offset to the TCP header with
skb_gro_pull and sets the transport header. Then returns skb->data to its
position before this block.
This commit introduces a new helper function - ipv6_gro_pull_exthdrs -
which is used in ipv6_gro_receive to pull ipv6 ext headers instead of
ipv6_gso_pull_exthdrs. Thus, there is no modification of skb->data, all
operations use skb_gro_* helpers, and the frag0 fast path can be taken for
IPv6 packets with ext headers.
Signed-off-by: Richard Gobert <richardbgobert@gmail.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/504130f6-b56c-4dcc-882c-97942c59f5b7@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This commit adds net_offload to IPv6 Hop-by-Hop extension headers (as it
is done for routing and dstopts) since it is supported in GSO and GRO.
This allows to remove specific HBH conditionals in GSO and GRO when
pulling and parsing an incoming packet.
Signed-off-by: Richard Gobert <richardbgobert@gmail.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/d4f8825a-1d55-4b12-9d67-a254dbbfa6ae@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When fib_default_rule_add is invoked, the value of the input parameter
'flags' is always 0. Rules uses kzalloc to allocate memory, so 'flags' has
been initialized to 0. Therefore, remove the input parameter 'flags' in
fib_default_rule_add.
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20240102071519.3781384-1-shaozhengchao@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This reverts commit 3dec89b14d.
The commit has some race conditions given how expires is managed on a
fib6_info in relation to gc start, adding the entry to the gc list and
setting the timer value leading to UAF. Revert the commit and try again
in a later release.
Fixes: 3dec89b14d ("net/ipv6: Remove expired routes with a separated list of routes")
Cc: Kui-Feng Lee <thinker.li@gmail.com>
Signed-off-by: David Ahern <dsahern@kernel.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20231219030243.25687-1-dsahern@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
optmem_max being used in tx zerocopy,
we want to be able to control it on a netns basis.
Following patch changes two tests.
Tested:
oqq130:~# cat /proc/sys/net/core/optmem_max
131072
oqq130:~# echo 1000000 >/proc/sys/net/core/optmem_max
oqq130:~# cat /proc/sys/net/core/optmem_max
1000000
oqq130:~# unshare -n
oqq130:~# cat /proc/sys/net/core/optmem_max
131072
oqq130:~# exit
logout
oqq130:~# cat /proc/sys/net/core/optmem_max
1000000
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
np->ucast_oif is read locklessly in some contexts.
Make all accesses to this field lockless, adding appropriate
annotations.
This also makes setsockopt( IPV6_UNICAST_IF ) lockless.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
np->mcast_oif is read locklessly in some contexts.
Make all accesses to this field lockless, adding appropriate
annotations.
This also makes setsockopt( IPV6_MULTICAST_IF ) lockless.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Lorenzo points out that we effectively clear all unknown
flags from PIO when copying them to userspace in the netlink
RTM_NEWPREFIX notification.
We could fix this one at a time as new flags are defined,
or in one fell swoop - I choose the latter.
We could either define 6 new reserved flags (reserved1..6) and handle
them individually (and rename them as new flags are defined), or we
could simply copy the entire unmodified byte over - I choose the latter.
This unfortunately requires some anonymous union/struct magic,
so we add a static assert on the struct size for a little extra safety.
Cc: David Ahern <dsahern@kernel.org>
Cc: Lorenzo Colitti <lorenzo@google.com>
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Maciej Żenczykowski <maze@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently functions that pre-calculate TCP header options length use
unaligned TCP-AO header + MAC-length for skb reservation.
And the functions that actually write TCP-AO options into skb do align
the header. Nothing good can come out of this for ((maclen % 4) != 0).
Provide tcp_ao_len_aligned() helper and use it everywhere for TCP
header options space calculations.
Fixes: 1e03d32bea ("net/tcp: Add TCP-AO sign to outgoing packets")
Signed-off-by: Dmitry Safonov <dima@arista.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
We will support arbitrary SYN Cookie with BPF, and then kfunc at
TC will preallocate reqsk and initialise some fields that should
not be overwritten later by cookie_v[46]_check().
To simplify the flow in cookie_v[46]_check(), we move such fields'
initialisation to cookie_tcp_reqsk_alloc() and factorise non-BPF
SYN Cookie handling into cookie_tcp_check(), where we validate the
cookie and allocate reqsk, as done by kfunc later.
Note that we set ireq->ecn_ok in two steps, the latter of which will
be shared by the BPF case. As cookie_ecn_ok() is one-liner, now
it's inlined.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20231129022924.96156-9-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
We will support arbitrary SYN Cookie with BPF, and then some reqsk fields
are initialised in kfunc, and others are done in cookie_v[46]_check().
This patch factorises the common part as cookie_tcp_reqsk_init() and
calls it in cookie_tcp_reqsk_alloc() to minimise the discrepancy between
cookie_v[46]_check().
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20231129022924.96156-8-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
We initialise treq->af_specific in cookie_tcp_reqsk_alloc() so that
we can look up a key later in tcp_create_openreq_child().
Initially, that change was added for MD5 by commit ba5a4fdd63 ("tcp:
make sure treq->af_specific is initialized"), but it has not been used
since commit d0f2b7a9ca ("tcp: Disable header prediction for MD5
flow.").
Now, treq->af_specific is used only by TCP-AO, so, we can move that
initialisation into tcp_ao_syncookie().
In addition to that, l3index in cookie_v[46]_check() is only used for
tcp_ao_syncookie(), so let's move it as well.
While at it, we move down tcp_ao_syncookie() in cookie_v4_check() so
that it will be called after security_inet_conn_request() to make
functions order consistent with cookie_v6_check().
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20231129022924.96156-7-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When we create a full socket from SYN Cookie, we initialise
tcp_sk(sk)->tsoffset redundantly in tcp_get_cookie_sock() as
the field is inherited from tcp_rsk(req)->ts_off.
cookie_v[46]_check
|- treq->ts_off = 0
`- tcp_get_cookie_sock
|- tcp_v[46]_syn_recv_sock
| `- tcp_create_openreq_child
| `- newtp->tsoffset = treq->ts_off
`- tcp_sk(child)->tsoffset = tsoff
Let's initialise tcp_rsk(req)->ts_off with the correct offset
and remove the second initialisation of tcp_sk(sk)->tsoffset.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20231129022924.96156-6-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
tcp_hdr(skb) and SYN Cookie are passed to __cookie_v[46]_check(), but
none of the callers passes cookie other than ntohl(th->ack_seq) - 1.
Let's fetch it in __cookie_v[46]_check() instead of passing the cookie
over and over.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20231129022924.96156-5-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
We will support arbitrary SYN Cookie with BPF, and then reqsk
will be preallocated before cookie_v[46]_check().
Depending on how validation fails, we send RST or just drop skb.
To make the error handling easier, let's clean up goto labels.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20231129022924.96156-4-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
sock_net(sk) is used repeatedly in cookie_v[46]_check().
Let's cache it in a variable.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20231129022924.96156-3-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
We will grow and cut the xmas tree in cookie_v[46]_check().
This patch cleans it up to make later patches tidy.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20231129022924.96156-2-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Currently, non fatal ICMP messages received on behalf
of SYN_SENT sockets do call tcp_ld_RTO_revert()
to implement RFC 6069, but immediately call tcp_done(),
thus aborting the connect() attempt.
This violates RFC 1122 following requirement:
4.2.3.9 ICMP Messages
...
o Destination Unreachable -- codes 0, 1, 5
Since these Unreachable messages indicate soft error
conditions, TCP MUST NOT abort the connection, and it
SHOULD make the information available to the
application.
This patch makes sure non 'fatal' ICMP[v6] messages do not
abort the connection attempt.
It enables RFC 6069 for SYN_SENT sockets as a result.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: David Morley <morleyd@google.com>
Cc: Neal Cardwell <ncardwell@google.com>
Cc: Yuchung Cheng <ycheng@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Current release - regressions:
- sched: fix SKB_NOT_DROPPED_YET splat under debug config
Current release - new code bugs:
- tcp: fix usec timestamps with TCP fastopen
- tcp_sigpool: fix some off by one bugs
- tcp: fix possible out-of-bounds reads in tcp_hash_fail()
- tcp: fix SYN option room calculation for TCP-AO
- bpf: fix compilation error without CGROUPS
- ptp:
- ptp_read() should not release queue
- fix tsevqs corruption
Previous releases - regressions:
- llc: verify mac len before reading mac header
Previous releases - always broken:
- bpf:
- fix check_stack_write_fixed_off() to correctly spill imm
- fix precision tracking for BPF_ALU | BPF_TO_BE | BPF_END
- check map->usercnt after timer->timer is assigned
- dsa: lan9303: consequently nested-lock physical MDIO
- dccp/tcp: call security_inet_conn_request() after setting IP addr
- tg3: fix the TX ring stall due to incorrect full ring handling
- phylink: initialize carrier state at creation
- ice: fix direction of VF rules in switchdev mode
Misc:
- fill in a bunch of missing MODULE_DESCRIPTION()s, more to come
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=k6Wk
-----END PGP SIGNATURE-----
Merge tag 'net-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from netfilter and bpf.
Current release - regressions:
- sched: fix SKB_NOT_DROPPED_YET splat under debug config
Current release - new code bugs:
- tcp:
- fix usec timestamps with TCP fastopen
- fix possible out-of-bounds reads in tcp_hash_fail()
- fix SYN option room calculation for TCP-AO
- tcp_sigpool: fix some off by one bugs
- bpf: fix compilation error without CGROUPS
- ptp:
- ptp_read() should not release queue
- fix tsevqs corruption
Previous releases - regressions:
- llc: verify mac len before reading mac header
Previous releases - always broken:
- bpf:
- fix check_stack_write_fixed_off() to correctly spill imm
- fix precision tracking for BPF_ALU | BPF_TO_BE | BPF_END
- check map->usercnt after timer->timer is assigned
- dsa: lan9303: consequently nested-lock physical MDIO
- dccp/tcp: call security_inet_conn_request() after setting IP addr
- tg3: fix the TX ring stall due to incorrect full ring handling
- phylink: initialize carrier state at creation
- ice: fix direction of VF rules in switchdev mode
Misc:
- fill in a bunch of missing MODULE_DESCRIPTION()s, more to come"
* tag 'net-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (84 commits)
net: ti: icss-iep: fix setting counter value
ptp: fix corrupted list in ptp_open
ptp: ptp_read should not release queue
net_sched: sch_fq: better validate TCA_FQ_WEIGHTS and TCA_FQ_PRIOMAP
net: kcm: fill in MODULE_DESCRIPTION()
net/sched: act_ct: Always fill offloading tuple iifidx
netfilter: nat: fix ipv6 nat redirect with mapped and scoped addresses
netfilter: xt_recent: fix (increase) ipv6 literal buffer length
ipvs: add missing module descriptions
netfilter: nf_tables: remove catchall element in GC sync path
netfilter: add missing module descriptions
drivers/net/ppp: use standard array-copy-function
net: enetc: shorten enetc_setup_xdp_prog() error message to fit NETLINK_MAX_FMTMSG_LEN
virtio/vsock: Fix uninit-value in virtio_transport_recv_pkt()
r8169: respect userspace disabling IFF_MULTICAST
selftests/bpf: get trusted cgrp from bpf_iter__cgroup directly
bpf: Let verifier consider {task,cgroup} is trusted in bpf_iter_reg
net: phylink: initialize carrier state at creation
test/vsock: add dobule bind connect test
test/vsock: refactor vsock_accept
...
API:
- Add virtual-address based lskcipher interface.
- Optimise ahash/shash performance in light of costly indirect calls.
- Remove ahash alignmask attribute.
Algorithms:
- Improve AES/XTS performance of 6-way unrolling for ppc.
- Remove some uses of obsolete algorithms (md4, md5, sha1).
- Add FIPS 202 SHA-3 support in pkcs1pad.
- Add fast path for single-page messages in adiantum.
- Remove zlib-deflate.
Drivers:
- Add support for S4 in meson RNG driver.
- Add STM32MP13x support in stm32.
- Add hwrng interface support in qcom-rng.
- Add support for deflate algorithm in hisilicon/zip.
-----BEGIN PGP SIGNATURE-----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=IZmR
-----END PGP SIGNATURE-----
Merge tag 'v6.7-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto updates from Herbert Xu:
"API:
- Add virtual-address based lskcipher interface
- Optimise ahash/shash performance in light of costly indirect calls
- Remove ahash alignmask attribute
Algorithms:
- Improve AES/XTS performance of 6-way unrolling for ppc
- Remove some uses of obsolete algorithms (md4, md5, sha1)
- Add FIPS 202 SHA-3 support in pkcs1pad
- Add fast path for single-page messages in adiantum
- Remove zlib-deflate
Drivers:
- Add support for S4 in meson RNG driver
- Add STM32MP13x support in stm32
- Add hwrng interface support in qcom-rng
- Add support for deflate algorithm in hisilicon/zip"
* tag 'v6.7-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (283 commits)
crypto: adiantum - flush destination page before unmapping
crypto: testmgr - move pkcs1pad(rsa,sha3-*) to correct place
Documentation/module-signing.txt: bring up to date
module: enable automatic module signing with FIPS 202 SHA-3
crypto: asymmetric_keys - allow FIPS 202 SHA-3 signatures
crypto: rsa-pkcs1pad - Add FIPS 202 SHA-3 support
crypto: FIPS 202 SHA-3 register in hash info for IMA
x509: Add OIDs for FIPS 202 SHA-3 hash and signatures
crypto: ahash - optimize performance when wrapping shash
crypto: ahash - check for shash type instead of not ahash type
crypto: hash - move "ahash wrapping shash" functions to ahash.c
crypto: talitos - stop using crypto_ahash::init
crypto: chelsio - stop using crypto_ahash::init
crypto: ahash - improve file comment
crypto: ahash - remove struct ahash_request_priv
crypto: ahash - remove crypto_ahash_alignmask
crypto: gcm - stop using alignmask of ahash
crypto: chacha20poly1305 - stop using alignmask of ahash
crypto: ccm - stop using alignmask of ahash
net: ipv6: stop checking crypto_ahash_alignmask
...
Initially, commit 4237c75c0a ("[MLSXFRM]: Auto-labeling of child
sockets") introduced security_inet_conn_request() in some functions
where reqsk is allocated. The hook is added just after the allocation,
so reqsk's IPv6 remote address was not initialised then.
However, SELinux/Smack started to read it in netlbl_req_setattr()
after commit e1adea9270 ("calipso: Allow request sockets to be
relabelled by the lsm.").
Commit 284904aa79 ("lsm: Relocate the IPv4 security_inet_conn_request()
hooks") fixed that kind of issue only in TCPv4 because IPv6 labeling was
not supported at that time. Finally, the same issue was introduced again
in IPv6.
Let's apply the same fix on DCCPv6 and TCPv6.
Fixes: e1adea9270 ("calipso: Allow request sockets to be relabelled by the lsm.")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Acked-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-----BEGIN PGP SIGNATURE-----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=slHB
-----END PGP SIGNATURE-----
Merge tag 'ipsec-next-2023-10-28' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec-next
Steffen Klassert says:
====================
pull request (net-next): ipsec-next 2023-10-28
1) Remove unused function declarations of xfrm4_extract_input and
xfrm6_extract_input. From Yue Haibing.
2) Annotate struct xfrm_sec_ctx with __counted_by.
From Kees Cook.
3) Support GRO decapsulation for ESP in UDP encapsulation.
From Antony Antony et all.
4) Replace the xfrm session decode with flow dissector.
From Florian Westphal.
5) Fix a use after free in __xfrm6_udp_encap_rcv.
6) Fix the layer 4 flowi decoding.
From Florian Westphal.
* tag 'ipsec-next-2023-10-28' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec-next:
xfrm: policy: fix layer 4 flowi decoding
xfrm Fix use after free in __xfrm6_udp_encap_rcv.
xfrm: policy: replace session decode with flow dissector
xfrm: move mark and oif flowi decode into common code
xfrm: pass struct net to xfrm_decode_session wrappers
xfrm: Support GRO for IPv6 ESP in UDP encapsulation
xfrm: Support GRO for IPv4 ESP in UDP encapsulation
xfrm: Use the XFRM_GRO to indicate a GRO call on input
xfrm: Annotate struct xfrm_sec_ctx with __counted_by
xfrm: Remove unused function declarations
====================
Link: https://lore.kernel.org/r/20231028084328.3119236-1-steffen.klassert@secunet.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Now that the alignmask for ahash and shash algorithms is always 0,
crypto_ahash_alignmask() always returns 0 and will be removed. In
preparation for this, stop checking crypto_ahash_alignmask() in ah6.c.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Similarly how TCP_MD5SIG_FLAG_IFINDEX works for TCP-MD5,
TCP_AO_KEYF_IFINDEX is an AO-key flag that binds that MKT to a specified
by L3 ifinndex. Similarly, without this flag the key will work in
the default VRF l3index = 0 for connections.
To prevent AO-keys from overlapping, it's restricted to add key B for a
socket that has key A, which have the same sndid/rcvid and one of
the following is true:
- !(A.keyflags & TCP_AO_KEYF_IFINDEX) or !(B.keyflags & TCP_AO_KEYF_IFINDEX)
so that any key is non-bound to a VRF
- A.l3index == B.l3index
both want to work for the same VRF
Additionally, it's restricted to match TCP-MD5 keys for the same peer
the following way:
|--------------|--------------------|----------------|---------------|
| | MD5 key without | MD5 key | MD5 key |
| | l3index | l3index=0 | l3index=N |
|--------------|--------------------|----------------|---------------|
| TCP-AO key | | | |
| without | reject | reject | reject |
| l3index | | | |
|--------------|--------------------|----------------|---------------|
| TCP-AO key | | | |
| l3index=0 | reject | reject | allow |
|--------------|--------------------|----------------|---------------|
| TCP-AO key | | | |
| l3index=N | reject | allow | reject |
|--------------|--------------------|----------------|---------------|
This is done with the help of tcp_md5_do_lookup_any_l3index() to reject
adding AO key without TCP_AO_KEYF_IFINDEX if there's TCP-MD5 in any VRF.
This is important for case where sysctl_tcp_l3mdev_accept = 1
Similarly, for TCP-AO lookups tcp_ao_do_lookup() may be used with
l3index < 0, so that __tcp_ao_key_cmp() will match TCP-AO key in any VRF.
Signed-off-by: Dmitry Safonov <dima@arista.com>
Acked-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Similarly to TCP-MD5, add a static key to TCP-AO that is patched out
when there are no keys on a machine and dynamically enabled with the
first setsockopt(TCP_AO) adds a key on any socket. The static key is as
well dynamically disabled later when the socket is destructed.
The lifetime of enabled static key here is the same as ao_info: it is
enabled on allocation, passed over from full socket to twsk and
destructed when ao_info is scheduled for destruction.
Signed-off-by: Dmitry Safonov <dima@arista.com>
Acked-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Similarly to IPsec, RFC5925 prescribes:
">> A TCP-AO implementation MUST default to ignore incoming ICMPv4
messages of Type 3 (destination unreachable), Codes 2-4 (protocol
unreachable, port unreachable, and fragmentation needed -- ’hard
errors’), and ICMPv6 Type 1 (destination unreachable), Code 1
(administratively prohibited) and Code 4 (port unreachable) intended
for connections in synchronized states (ESTABLISHED, FIN-WAIT-1, FIN-
WAIT-2, CLOSE-WAIT, CLOSING, LAST-ACK, TIME-WAIT) that match MKTs."
A selftest (later in patch series) verifies that this attack is not
possible in this TCP-AO implementation.
Co-developed-by: Francesco Ruggeri <fruggeri@arista.com>
Signed-off-by: Francesco Ruggeri <fruggeri@arista.com>
Co-developed-by: Salam Noureddine <noureddine@arista.com>
Signed-off-by: Salam Noureddine <noureddine@arista.com>
Signed-off-by: Dmitry Safonov <dima@arista.com>
Acked-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add Sequence Number Extension (SNE) for TCP-AO.
This is needed to protect long-living TCP-AO connections from replaying
attacks after sequence number roll-over, see RFC5925 (6.2).
Co-developed-by: Francesco Ruggeri <fruggeri@arista.com>
Signed-off-by: Francesco Ruggeri <fruggeri@arista.com>
Co-developed-by: Salam Noureddine <noureddine@arista.com>
Signed-off-by: Salam Noureddine <noureddine@arista.com>
Signed-off-by: Dmitry Safonov <dima@arista.com>
Acked-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Introduce segment counters that are useful for troubleshooting/debugging
as well as for writing tests.
Now there are global snmp counters as well as per-socket and per-key.
Co-developed-by: Francesco Ruggeri <fruggeri@arista.com>
Signed-off-by: Francesco Ruggeri <fruggeri@arista.com>
Co-developed-by: Salam Noureddine <noureddine@arista.com>
Signed-off-by: Salam Noureddine <noureddine@arista.com>
Signed-off-by: Dmitry Safonov <dima@arista.com>
Acked-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Now there is a common function to verify signature on TCP segments:
tcp_inbound_hash(). It has checks for all possible cross-interactions
with MD5 signs as well as with unsigned segments.
The rules from RFC5925 are:
(1) Any TCP segment can have at max only one signature.
(2) TCP connections can't switch between using TCP-MD5 and TCP-AO.
(3) TCP-AO connections can't stop using AO, as well as unsigned
connections can't suddenly start using AO.
Co-developed-by: Francesco Ruggeri <fruggeri@arista.com>
Signed-off-by: Francesco Ruggeri <fruggeri@arista.com>
Co-developed-by: Salam Noureddine <noureddine@arista.com>
Signed-off-by: Salam Noureddine <noureddine@arista.com>
Signed-off-by: Dmitry Safonov <dima@arista.com>
Acked-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Similarly to RST segments, wire SYN-ACKs to TCP-AO.
tcp_rsk_used_ao() is handy here to check if the request socket used AO
and needs a signature on the outgoing segments.
Co-developed-by: Francesco Ruggeri <fruggeri@arista.com>
Signed-off-by: Francesco Ruggeri <fruggeri@arista.com>
Co-developed-by: Salam Noureddine <noureddine@arista.com>
Signed-off-by: Salam Noureddine <noureddine@arista.com>
Signed-off-by: Dmitry Safonov <dima@arista.com>
Acked-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Now when the new request socket is created from the listening socket,
it's recorded what MKT was used by the peer. tcp_rsk_used_ao() is
a new helper for checking if TCP-AO option was used to create the
request socket.
tcp_ao_copy_all_matching() will copy all keys that match the peer on the
request socket, as well as preparing them for the usage (creating
traffic keys).
Co-developed-by: Francesco Ruggeri <fruggeri@arista.com>
Signed-off-by: Francesco Ruggeri <fruggeri@arista.com>
Co-developed-by: Salam Noureddine <noureddine@arista.com>
Signed-off-by: Salam Noureddine <noureddine@arista.com>
Signed-off-by: Dmitry Safonov <dima@arista.com>
Acked-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add support for sockets in time-wait state.
ao_info as well as all keys are inherited on transition to time-wait
socket. The lifetime of ao_info is now protected by ref counter, so
that tcp_ao_destroy_sock() will destruct it only when the last user is
gone.
Co-developed-by: Francesco Ruggeri <fruggeri@arista.com>
Signed-off-by: Francesco Ruggeri <fruggeri@arista.com>
Co-developed-by: Salam Noureddine <noureddine@arista.com>
Signed-off-by: Salam Noureddine <noureddine@arista.com>
Signed-off-by: Dmitry Safonov <dima@arista.com>
Acked-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Wire up sending resets to TCP-AO hashing.
Co-developed-by: Francesco Ruggeri <fruggeri@arista.com>
Signed-off-by: Francesco Ruggeri <fruggeri@arista.com>
Co-developed-by: Salam Noureddine <noureddine@arista.com>
Signed-off-by: Salam Noureddine <noureddine@arista.com>
Signed-off-by: Dmitry Safonov <dima@arista.com>
Acked-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Introduce a helper that:
(1) shares the common code with TCP-MD5 header options parsing
(2) looks for hash signature only once for both TCP-MD5 and TCP-AO
(3) fails with -EEXIST if any TCP sign option is present twice, see
RFC5925 (2.2):
">> A single TCP segment MUST NOT have more than one TCP-AO in its
options sequence. When multiple TCP-AOs appear, TCP MUST discard
the segment."
Co-developed-by: Francesco Ruggeri <fruggeri@arista.com>
Signed-off-by: Francesco Ruggeri <fruggeri@arista.com>
Co-developed-by: Salam Noureddine <noureddine@arista.com>
Signed-off-by: Salam Noureddine <noureddine@arista.com>
Signed-off-by: Dmitry Safonov <dima@arista.com>
Acked-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Using precalculated traffic keys, sign TCP segments as prescribed by
RFC5925. Per RFC, TCP header options are included in sign calculation:
"The TCP header, by default including options, and where the TCP
checksum and TCP-AO MAC fields are set to zero, all in network-
byte order." (5.1.3)
tcp_ao_hash_header() has exclude_options parameter to optionally exclude
TCP header from hash calculation, as described in RFC5925 (9.1), this is
needed for interaction with middleboxes that may change "some TCP
options". This is wired up to AO key flags and setsockopt() later.
Similarly to TCP-MD5 hash TCP segment fragments.
From this moment a user can start sending TCP-AO signed segments with
one of crypto ahash algorithms from supported by Linux kernel. It can
have a user-specified MAC length, to either save TCP option header space
or provide higher protection using a longer signature.
The inbound segments are not yet verified, TCP-AO option is ignored and
they are accepted.
Co-developed-by: Francesco Ruggeri <fruggeri@arista.com>
Signed-off-by: Francesco Ruggeri <fruggeri@arista.com>
Co-developed-by: Salam Noureddine <noureddine@arista.com>
Signed-off-by: Salam Noureddine <noureddine@arista.com>
Signed-off-by: Dmitry Safonov <dima@arista.com>
Acked-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add traffic key calculation the way it's described in RFC5926.
Wire it up to tcp_finish_connect() and cache the new keys straight away
on already established TCP connections.
Co-developed-by: Francesco Ruggeri <fruggeri@arista.com>
Signed-off-by: Francesco Ruggeri <fruggeri@arista.com>
Co-developed-by: Salam Noureddine <noureddine@arista.com>
Signed-off-by: Salam Noureddine <noureddine@arista.com>
Signed-off-by: Dmitry Safonov <dima@arista.com>
Acked-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Be as conservative as possible: if there is TCP-MD5 key for a given peer
regardless of L3 interface - don't allow setting TCP-AO key for the same
peer. According to RFC5925, TCP-AO is supposed to replace TCP-MD5 and
there can't be any switch between both on any connected tuple.
Later it can be relaxed, if there's a use, but in the beginning restrict
any intersection.
Note: it's still should be possible to set both TCP-MD5 and TCP-AO keys
on a listening socket for *different* peers.
Co-developed-by: Francesco Ruggeri <fruggeri@arista.com>
Signed-off-by: Francesco Ruggeri <fruggeri@arista.com>
Co-developed-by: Salam Noureddine <noureddine@arista.com>
Signed-off-by: Salam Noureddine <noureddine@arista.com>
Signed-off-by: Dmitry Safonov <dima@arista.com>
Acked-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add 3 setsockopt()s:
1. TCP_AO_ADD_KEY to add a new Master Key Tuple (MKT) on a socket
2. TCP_AO_DEL_KEY to delete present MKT from a socket
3. TCP_AO_INFO to change flags, Current_key/RNext_key on a TCP-AO sk
Userspace has to introduce keys on every socket it wants to use TCP-AO
option on, similarly to TCP_MD5SIG/TCP_MD5SIG_EXT.
RFC5925 prohibits definition of MKTs that would match the same peer,
so do sanity checks on the data provided by userspace. Be as
conservative as possible, including refusal of defining MKT on
an established connection with no AO, removing the key in-use and etc.
(1) and (2) are to be used by userspace key manager to add/remove keys.
(3) main purpose is to set RNext_key, which (as prescribed by RFC5925)
is the KeyID that will be requested in TCP-AO header from the peer to
sign their segments with.
At this moment the life of ao_info ends in tcp_v4_destroy_sock().
Co-developed-by: Francesco Ruggeri <fruggeri@arista.com>
Signed-off-by: Francesco Ruggeri <fruggeri@arista.com>
Co-developed-by: Salam Noureddine <noureddine@arista.com>
Signed-off-by: Salam Noureddine <noureddine@arista.com>
Signed-off-by: Dmitry Safonov <dima@arista.com>
Acked-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
TCP-AO, similarly to TCP-MD5, needs to allocate tfms on a slow-path,
which is setsockopt() and use crypto ahash requests on fast paths,
which are RX/TX softirqs. Also, it needs a temporary/scratch buffer
for preparing the hash.
Rework tcp_md5sig_pool in order to support other hashing algorithms
than MD5. It will make it possible to share pre-allocated crypto_ahash
descriptors and scratch area between all TCP hash users.
Internally tcp_sigpool calls crypto_clone_ahash() API over pre-allocated
crypto ahash tfm. Kudos to Herbert, who provided this new crypto API.
I was a little concerned over GFP_ATOMIC allocations of ahash and
crypto_request in RX/TX (see tcp_sigpool_start()), so I benchmarked both
"backends" with different algorithms, using patched version of iperf3[2].
On my laptop with i7-7600U @ 2.80GHz:
clone-tfm per-CPU-requests
TCP-MD5 2.25 Gbits/sec 2.30 Gbits/sec
TCP-AO(hmac(sha1)) 2.53 Gbits/sec 2.54 Gbits/sec
TCP-AO(hmac(sha512)) 1.67 Gbits/sec 1.64 Gbits/sec
TCP-AO(hmac(sha384)) 1.77 Gbits/sec 1.80 Gbits/sec
TCP-AO(hmac(sha224)) 1.29 Gbits/sec 1.30 Gbits/sec
TCP-AO(hmac(sha3-512)) 481 Mbits/sec 480 Mbits/sec
TCP-AO(hmac(md5)) 2.07 Gbits/sec 2.12 Gbits/sec
TCP-AO(hmac(rmd160)) 1.01 Gbits/sec 995 Mbits/sec
TCP-AO(cmac(aes128)) [not supporetd yet] 2.11 Gbits/sec
So, it seems that my concerns don't have strong grounds and per-CPU
crypto_request allocation can be dropped/removed from tcp_sigpool once
ciphers get crypto_clone_ahash() support.
[1]: https://lore.kernel.org/all/ZDefxOq6Ax0JeTRH@gondor.apana.org.au/T/#u
[2]: https://github.com/0x7f454c46/iperf/tree/tcp-md5-ao
Signed-off-by: Dmitry Safonov <dima@arista.com>
Reviewed-by: Steen Hegelund <Steen.Hegelund@microchip.com>
Acked-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
struct nla_policy is usually constant itself, but unless
we make the ranges inside constant we won't be able to
make range structs const. The ranges are not modified
by the core.
Reviewed-by: Johannes Berg <johannes@sipsolutions.net>
Reviewed-by: David Ahern <dsahern@kernel.org>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/20231025162204.132528-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
If the preferred lifetime was less than the minimum required lifetime,
ipv6_create_tempaddr would error out without creating any new address.
On my machine and network, this error happened immediately with the
preferred lifetime set to 1 second, after a few minutes with the
preferred lifetime set to 4 seconds, and not at all with the preferred
lifetime set to 5 seconds. During my investigation, I found a Stack
Exchange post from another person who seems to have had the same
problem: They stopped getting new addresses if they lowered the
preferred lifetime below 3 seconds, and they didn't really know why.
The preferred lifetime is a preference, not a hard requirement. The
kernel does not strictly forbid new connections on a deprecated address,
nor does it guarantee that the address will be disposed of the instant
its total valid lifetime expires. So rather than disable IPv6 privacy
extensions altogether if the minimum required lifetime swells above the
preferred lifetime, it is more in keeping with the user's intent to
increase the temporary address's lifetime to the minimum necessary for
the current network conditions.
With these fixes, setting the preferred lifetime to 3 or 4 seconds "just
works" because the extra fraction of a second is practically
unnoticeable. It's even possible to reduce the time before deprecation
to 1 or 2 seconds by also disabling duplicate address detection (setting
/proc/sys/net/ipv6/conf/*/dad_transmits to 0). I realize that that is a
pretty niche use case, but I know at least one person who would gladly
sacrifice performance and convenience to be sure that they are getting
the maximum possible level of privacy.
Link: https://serverfault.com/a/1031168/310447
Signed-off-by: Alex Henrie <alexhenrie24@gmail.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20231024212312.299370-3-alexhenrie24@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Without this patch, there is nothing to stop the preferred lifetime of a
temporary address from being greater than its valid lifetime. If that
was the case, the valid lifetime was effectively ignored.
Signed-off-by: Alex Henrie <alexhenrie24@gmail.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20231024212312.299370-2-alexhenrie24@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When the ipv6 stack output a GSO packet, if its gso_size is larger than
dst MTU, then all segments would be fragmented. However, it is possible
for a GSO packet to have a trailing segment with smaller actual size
than both gso_size as well as the MTU, which leads to an "atomic
fragment". Atomic fragments are considered harmful in RFC-8021. An
Existing report from APNIC also shows that atomic fragments are more
likely to be dropped even it is equivalent to a no-op [1].
Add an extra check in the GSO slow output path. For each segment from
the original over-sized packet, if it fits with the path MTU, then avoid
generating an atomic fragment.
Link: https://www.potaroo.net/presentations/2022-03-01-ipv6-frag.pdf [1]
Fixes: b210de4f8c ("net: ipv6: Validate GSO SKB before finish IPv6 processing")
Reported-by: David Wragg <dwragg@cloudflare.com>
Signed-off-by: Yan Zhai <yan@cloudflare.com>
Link: https://lore.kernel.org/r/90912e3503a242dca0bc36958b11ed03a2696e5e.1698156966.git.yan@cloudflare.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Separate GSO and non-GSO packets handling to make the logic cleaner. For
GSO packets, frag_max_size check can be omitted because it is only
useful for packets defragmented by netfilter hooks. Both local output
and GRO logic won't produce GSO packets when defragment is needed. This
also mirrors what IPv4 side code is doing.
Suggested-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Yan Zhai <yan@cloudflare.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/0e1d4599f858e2becff5c4fe0b5f843236bc3fe8.1698156966.git.yan@cloudflare.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
RTAX_FEATURE_ALLFRAG was added before the first git commit:
https://www.mail-archive.com/bk-commits-head@vger.kernel.org/msg03399.html
The feature would send packets to the fragmentation path if a box
receives a PMTU value with less than 1280 byte. However, since commit
9d289715eb ("ipv6: stop sending PTB packets for MTU < 1280"), such
message would be simply discarded. The feature flag is neither supported
in iproute2 utility. In theory one can still manipulate it with direct
netlink message, but it is not ideal because it was based on obsoleted
guidance of RFC-2460 (replaced by RFC-8200).
The feature would always test false at the moment, so remove related
code or mark them as unused.
Signed-off-by: Yan Zhai <yan@cloudflare.com>
Reviewed-by: Florian Westphal <fw@strlen.de>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/d78e44dcd9968a252143ffe78460446476a472a1.1698156966.git.yan@cloudflare.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The word "advertize" should be replaced by "advertise".
Signed-off-by: Deming Wang <wangdeming@inspur.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Back in 2015, Van Jacobson suggested to use usec resolution in TCP TS values.
This has been implemented in our private kernels.
Goals were :
1) better observability of delays in networking stacks.
2) better disambiguation of events based on TSval/ecr values.
3) building block for congestion control modules needing usec resolution.
Back then we implemented a schem based on private SYN options
to negotiate the feature.
For upstream submission, we chose to use a route attribute,
because this feature is probably going to be used in private
networks [1] [2].
ip route add 10/8 ... features tcp_usec_ts
Note that RFC 7323 recommends a
"timestamp clock frequency in the range 1 ms to 1 sec per tick.",
but also mentions
"the maximum acceptable clock frequency is one tick every 59 ns."
[1] Unfortunately RFC 7323 5.5 (Outdated Timestamps) suggests
to invalidate TS.Recent values after a flow was idle for more
than 24 days. This is the part making usec_ts a problem
for peers following this recommendation for long living
idle flows.
[2] Attempts to standardize usec ts went nowhere:
https://www.ietf.org/proceedings/97/slides/slides-97-tcpm-tcp-options-for-low-latency-00.pdfhttps://datatracker.ietf.org/doc/draft-wang-tcpm-low-latency-opt/
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In preparation of usec TCP TS support, remove tcp_time_stamp_raw()
in favor of tcp_clock_ts() helper. This helper will return a suitable
32bit result to feed TS values, depending on a socket field.
Also add tcp_tw_tsval() and tcp_rsk_tsval() helpers to factorize
the details.
We do not yet support usec timestamps.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
We want to make the function more generic so that it can be used by
other UDP tunnel implementations such as geneve and vxlan. To do that,
add the following arguments:
- source and destination UDP port;
- ifindex of the output interface, needed by vxlan;
- the tos, because in some cases it is not taken from struct
ip_tunnel_info (for example, when it's inherited from the inner
packet);
- the dst cache, because not all tunnel types (e.g. vxlan) want to
use the one from struct ip_tunnel_info.
With these parameters, the function no longer needs the full struct
ip_tunnel_info as argument and we can pass only the relevant part of
it (struct ip_tunnel_key).
This is similar to what already done for IPv4 in commit 72fc68c635
("ipv4: add new arguments to udp_tunnel_dst_lookup()").
Suggested-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: Beniamino Galvani <b.galvani@gmail.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
The function is now UDP-specific, the protocol is always IPPROTO_UDP.
This is similar to what already done for IPv4 in commit 78f3655adc
("ipv4: remove "proto" argument from udp_tunnel_dst_lookup()").
Suggested-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: Beniamino Galvani <b.galvani@gmail.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
At the moment ip6_dst_lookup_tunnel() is used only by bareudp.
Ideally, other UDP tunnel implementations should use it, but to do so
the function needs to accept new parameters that are specific for UDP
tunnels, such as the ports.
Prepare for these changes by renaming the function to
udp_tunnel6_dst_lookup() and move it to file
net/ipv6/ip6_udp_tunnel.c.
This is similar to what already done for IPv4 in commit bf3fcbf7e7
("ipv4: rename and move ip_route_output_tunnel()").
Suggested-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: Beniamino Galvani <b.galvani@gmail.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet